#include <sys/stat.h>
#include <sys/wait.h>
#include <sys/ipc.h>
-#ifndef FIO_NO_HAVE_SHM_H
-#include <sys/shm.h>
-#endif
#include <sys/mman.h>
#include "fio.h"
+#ifndef FIO_NO_HAVE_SHM_H
+#include <sys/shm.h>
+#endif
#include "hash.h"
#include "smalloc.h"
#include "verify.h"
static char *cgroup_mnt;
static int exit_value;
static volatile int fio_abort;
+static unsigned int nr_process = 0;
+static unsigned int nr_thread = 0;
struct io_log *agg_io_log[DDIR_RWDIR_CNT];
int groupid = 0;
unsigned int thread_number = 0;
unsigned int stat_number = 0;
-unsigned int nr_process = 0;
-unsigned int nr_thread = 0;
int shm_id = 0;
int temp_stall_ts;
unsigned long done_secs = 0;
*/
static void cleanup_pending_aio(struct thread_data *td)
{
- struct flist_head *entry, *n;
- struct io_u *io_u;
int r;
/*
* now cancel remaining active events
*/
if (td->io_ops->cancel) {
- flist_for_each_safe(entry, n, &td->io_u_busylist) {
- io_u = flist_entry(entry, struct io_u, list);
+ struct io_u *io_u;
+ int i;
- /*
- * if the io_u isn't in flight, then that generally
- * means someone leaked an io_u. complain but fix
- * it up, so we don't stall here.
- */
- if ((io_u->flags & IO_U_F_FLIGHT) == 0) {
- log_err("fio: non-busy IO on busy list\n");
- put_io_u(td, io_u);
- } else {
+ io_u_qiter(&td->io_u_all, io_u, i) {
+ if (io_u->flags & IO_U_F_FLIGHT) {
r = td->io_ops->cancel(td, io_u);
if (!r)
put_io_u(td, io_u);
return 0;
}
+static void check_update_rusage(struct thread_data *td)
+{
+ if (td->update_rusage) {
+ td->update_rusage = 0;
+ update_rusage_stat(td);
+ fio_mutex_up(td->rusage_sem);
+ }
+}
+
/*
* The main verify engine. Runs over the writes we previously submitted,
* reads the blocks back in, and checks the crc/md5 of the data.
break;
}
+ check_update_rusage(td);
+
if (td->error)
return;
int ret2, full;
update_tv_cache(td);
+ check_update_rusage(td);
if (runtime_exceeded(td, &td->tv_cache)) {
__update_tv_cache(td);
break;
}
+ check_update_rusage(td);
+
if (!td->error) {
min_events = td->cur_depth;
uint64_t bytes_done[DDIR_RWDIR_CNT] = { 0, 0, 0 };
unsigned int i;
int ret = 0;
+ uint64_t bytes_issued = 0;
if (in_ramp_time(td))
td_set_runstate(td, TD_RAMP);
int ret2, full;
enum fio_ddir ddir;
+ check_update_rusage(td);
+
if (td->terminate || td->done)
break;
if (flow_threshold_exceeded(td))
continue;
+ if (bytes_issued >= (uint64_t) td->o.size)
+ break;
+
io_u = get_io_u(td);
if (!io_u)
break;
int bytes = io_u->xfer_buflen - io_u->resid;
struct fio_file *f = io_u->file;
+ bytes_issued += bytes;
/*
* zero read, fail
*/
ret = io_u_sync_complete(td, io_u, bytes_done);
if (ret < 0)
break;
+ bytes_issued += io_u->xfer_buflen;
}
break;
case FIO_Q_QUEUED:
*/
if (td->io_ops->commit == NULL)
io_u_queued(td, io_u);
+ bytes_issued += io_u->xfer_buflen;
break;
case FIO_Q_BUSY:
requeue_io_u(td, &io_u);
if (!(b % td->o.thinktime_blocks)) {
int left;
+ io_u_quiesce(td);
+
if (td->o.thinktime_spin)
usec_spin(td->o.thinktime_spin);
}
}
+ check_update_rusage(td);
+
if (td->trim_entries)
- log_err("fio: %d trim entries leaked?\n", td->trim_entries);
+ log_err("fio: %lu trim entries leaked?\n", td->trim_entries);
if (td->o.fill_device && td->error == ENOSPC) {
td->error = 0;
static void cleanup_io_u(struct thread_data *td)
{
- struct flist_head *entry, *n;
struct io_u *io_u;
- flist_for_each_safe(entry, n, &td->io_u_freelist) {
- io_u = flist_entry(entry, struct io_u, list);
-
- flist_del(&io_u->list);
+ while ((io_u = io_u_qpop(&td->io_u_freelist)) != NULL) {
if (td->io_ops->io_u_free)
td->io_ops->io_u_free(td, io_u);
}
free_io_mem(td);
+
+ io_u_rexit(&td->io_u_requeues);
+ io_u_qexit(&td->io_u_freelist);
+ io_u_qexit(&td->io_u_all);
}
static int init_io_u(struct thread_data *td)
struct io_u *io_u;
unsigned int max_bs, min_write;
int cl_align, i, max_units;
- int data_xfer = 1;
+ int data_xfer = 1, err;
char *p;
max_units = td->o.iodepth;
- max_bs = max(td->o.max_bs[DDIR_READ], td->o.max_bs[DDIR_WRITE]);
- max_bs = max(td->o.max_bs[DDIR_TRIM], max_bs);
+ max_bs = td_max_bs(td);
min_write = td->o.min_bs[DDIR_WRITE];
td->orig_buffer_size = (unsigned long long) max_bs
* (unsigned long long) max_units;
if ((td->io_ops->flags & FIO_NOIO) || !(td_read(td) || td_write(td)))
data_xfer = 0;
+ err = 0;
+ err += io_u_rinit(&td->io_u_requeues, td->o.iodepth);
+ err += io_u_qinit(&td->io_u_freelist, td->o.iodepth);
+ err += io_u_qinit(&td->io_u_all, td->o.iodepth);
+
+ if (err) {
+ log_err("fio: failed setting up IO queues\n");
+ return 1;
+ }
+
+ /*
+ * if we may later need to do address alignment, then add any
+ * possible adjustment here so that we don't cause a buffer
+ * overflow later. this adjustment may be too much if we get
+ * lucky and the allocator gives us an aligned address.
+ */
+ if (td->o.odirect || td->o.mem_align || td->o.oatomic ||
+ (td->io_ops->flags & FIO_RAWIO))
+ td->orig_buffer_size += page_mask + td->o.mem_align;
+
if (td->o.mem_type == MEM_SHMHUGE || td->o.mem_type == MEM_MMAPHUGE) {
unsigned long bs;
if (data_xfer && allocate_io_mem(td))
return 1;
- if (td->o.odirect || td->o.mem_align ||
+ if (td->o.odirect || td->o.mem_align || td->o.oatomic ||
(td->io_ops->flags & FIO_RAWIO))
p = PAGE_ALIGN(td->orig_buffer) + td->o.mem_align;
else
io_u = ptr;
memset(io_u, 0, sizeof(*io_u));
- INIT_FLIST_HEAD(&io_u->list);
+ INIT_FLIST_HEAD(&io_u->verify_list);
dprint(FD_MEM, "io_u alloc %p, index %u\n", io_u, i);
if (data_xfer) {
io_u->index = i;
io_u->flags = IO_U_F_FREE;
- flist_add(&io_u->list, &td->io_u_freelist);
+ io_u_qpush(&td->io_u_freelist, io_u);
+
+ /*
+ * io_u never leaves this stack, used for iteration of all
+ * io_u buffers.
+ */
+ io_u_qpush(&td->io_u_all, io_u);
if (td->io_ops->io_u_init) {
int ret = td->io_ops->io_u_init(td, io_u);
return 1;
}
- if (ddir_rw_sum(td->io_bytes) < td->o.size) {
+ if (td->o.size != -1ULL && ddir_rw_sum(td->io_bytes) < td->o.size) {
uint64_t diff;
/*
* are done.
*/
diff = td->o.size - ddir_rw_sum(td->io_bytes);
- if (diff < td->o.rw_min_bs)
+ if (diff < td_max_bs(td))
return 0;
return 1;
return 0;
}
-static int exec_string(const char *string)
+static int exec_string(struct thread_options *o, const char *string, const char *mode)
{
- int ret, newlen = strlen(string) + 1 + 8;
+ int ret, newlen = strlen(string) + strlen(o->name) + strlen(mode) + 9 + 1;
char *str;
str = malloc(newlen);
- sprintf(str, "sh -c %s", string);
+ sprintf(str, "%s &> %s.%s.txt", string, o->name, mode);
+ log_info("%s : Saving output of %s in %s.%s.txt\n",o->name, mode, o->name, mode);
ret = system(str);
if (ret == -1)
log_err("fio: exec of cmd <%s> failed\n", str);
{
unsigned long long elapsed;
struct thread_data *td = data;
+ struct thread_options *o = &td->o;
pthread_condattr_t attr;
int clear_state;
+ int ret;
- if (!td->o.use_thread) {
+ if (!o->use_thread) {
setsid();
td->pid = getpid();
} else
td->pid = gettid();
- fio_local_clock_init(td->o.use_thread);
+ /*
+ * fio_time_init() may not have been called yet if running as a server
+ */
+ fio_time_init();
+
+ fio_local_clock_init(o->use_thread);
dprint(FD_PROCESS, "jobs pid=%d started\n", (int) td->pid);
- INIT_FLIST_HEAD(&td->io_u_freelist);
- INIT_FLIST_HEAD(&td->io_u_busylist);
- INIT_FLIST_HEAD(&td->io_u_requeues);
+ if (is_backend)
+ fio_server_send_start(td);
+
INIT_FLIST_HEAD(&td->io_log_list);
INIT_FLIST_HEAD(&td->io_hist_list);
INIT_FLIST_HEAD(&td->verify_list);
* eating a file descriptor
*/
fio_mutex_remove(td->mutex);
+ td->mutex = NULL;
/*
* A new gid requires privilege, so we need to do this before setting
* the uid.
*/
- if (td->o.gid != -1U && setgid(td->o.gid)) {
+ if (o->gid != -1U && setgid(o->gid)) {
td_verror(td, errno, "setgid");
goto err;
}
- if (td->o.uid != -1U && setuid(td->o.uid)) {
+ if (o->uid != -1U && setuid(o->uid)) {
td_verror(td, errno, "setuid");
goto err;
}
* If we have a gettimeofday() thread, make sure we exclude that
* thread from this job
*/
- if (td->o.gtod_cpu)
- fio_cpu_clear(&td->o.cpumask, td->o.gtod_cpu);
+ if (o->gtod_cpu)
+ fio_cpu_clear(&o->cpumask, o->gtod_cpu);
/*
* Set affinity first, in case it has an impact on the memory
* allocations.
*/
- if (td->o.cpumask_set && fio_setaffinity(td->pid, td->o.cpumask) == -1) {
- td_verror(td, errno, "cpu_set_affinity");
- goto err;
+ if (o->cpumask_set) {
+ ret = fio_setaffinity(td->pid, o->cpumask);
+ if (ret == -1) {
+ td_verror(td, errno, "cpu_set_affinity");
+ goto err;
+ }
}
#ifdef CONFIG_LIBNUMA
/* numa node setup */
- if (td->o.numa_cpumask_set || td->o.numa_memmask_set) {
+ if (o->numa_cpumask_set || o->numa_memmask_set) {
int ret;
if (numa_available() < 0) {
goto err;
}
- if (td->o.numa_cpumask_set) {
- ret = numa_run_on_node_mask(td->o.numa_cpunodesmask);
+ if (o->numa_cpumask_set) {
+ ret = numa_run_on_node_mask(o->numa_cpunodesmask);
if (ret == -1) {
td_verror(td, errno, \
"numa_run_on_node_mask failed\n");
}
}
- if (td->o.numa_memmask_set) {
+ if (o->numa_memmask_set) {
- switch (td->o.numa_mem_mode) {
+ switch (o->numa_mem_mode) {
case MPOL_INTERLEAVE:
- numa_set_interleave_mask(td->o.numa_memnodesmask);
+ numa_set_interleave_mask(o->numa_memnodesmask);
break;
case MPOL_BIND:
- numa_set_membind(td->o.numa_memnodesmask);
+ numa_set_membind(o->numa_memnodesmask);
break;
case MPOL_LOCAL:
numa_set_localalloc();
break;
case MPOL_PREFERRED:
- numa_set_preferred(td->o.numa_mem_prefer_node);
+ numa_set_preferred(o->numa_mem_prefer_node);
break;
case MPOL_DEFAULT:
default:
}
#endif
+ if (fio_pin_memory(td))
+ goto err;
+
/*
* May alter parameters that init_io_u() will use, so we need to
* do this first.
if (init_io_u(td))
goto err;
- if (td->o.verify_async && verify_async_init(td))
+ if (o->verify_async && verify_async_init(td))
goto err;
- if (td->ioprio_set) {
- if (ioprio_set(IOPRIO_WHO_PROCESS, 0, td->ioprio) == -1) {
+ if (o->ioprio) {
+ ret = ioprio_set(IOPRIO_WHO_PROCESS, 0, o->ioprio_class, o->ioprio);
+ if (ret == -1) {
td_verror(td, errno, "ioprio_set");
goto err;
}
}
- if (td->o.cgroup && cgroup_setup(td, cgroup_list, &cgroup_mnt))
+ if (o->cgroup && cgroup_setup(td, cgroup_list, &cgroup_mnt))
goto err;
errno = 0;
- if (nice(td->o.nice) == -1 && errno != 0) {
+ if (nice(o->nice) == -1 && errno != 0) {
td_verror(td, errno, "nice");
goto err;
}
- if (td->o.ioscheduler && switch_ioscheduler(td))
+ if (o->ioscheduler && switch_ioscheduler(td))
goto err;
- if (!td->o.create_serialize && setup_files(td))
+ if (!o->create_serialize && setup_files(td))
goto err;
if (td_io_init(td))
if (init_random_map(td))
goto err;
- if (td->o.exec_prerun) {
- if (exec_string(td->o.exec_prerun))
- goto err;
- }
+ if (o->exec_prerun && exec_string(o, o->exec_prerun, (const char *)"prerun"))
+ goto err;
- if (td->o.pre_read) {
+ if (o->pre_read) {
if (pre_read_files(td) < 0)
goto err;
}
+ fio_verify_init(td);
+
fio_gettime(&td->epoch, NULL);
fio_getrusage(&td->ru_start);
clear_state = 0;
memcpy(&td->iops_sample_time, &td->start, sizeof(td->start));
memcpy(&td->tv_cache, &td->start, sizeof(td->start));
- if (td->o.ratemin[DDIR_READ] || td->o.ratemin[DDIR_WRITE] ||
- td->o.ratemin[DDIR_TRIM]) {
+ if (o->ratemin[DDIR_READ] || o->ratemin[DDIR_WRITE] ||
+ o->ratemin[DDIR_TRIM]) {
memcpy(&td->lastrate[DDIR_READ], &td->bw_sample_time,
sizeof(td->bw_sample_time));
memcpy(&td->lastrate[DDIR_WRITE], &td->bw_sample_time,
if (td->error || td->terminate)
break;
- if (!td->o.do_verify ||
- td->o.verify == VERIFY_NONE ||
+ if (!o->do_verify ||
+ o->verify == VERIFY_NONE ||
(td->io_ops->flags & FIO_UNIDIR))
continue;
td->ts.io_bytes[DDIR_WRITE] = td->io_bytes[DDIR_WRITE];
td->ts.io_bytes[DDIR_TRIM] = td->io_bytes[DDIR_TRIM];
+ fio_unpin_memory(td);
+
fio_mutex_down(writeout_mutex);
if (td->bw_log) {
- if (td->o.bw_log_file) {
+ if (o->bw_log_file) {
finish_log_named(td, td->bw_log,
- td->o.bw_log_file, "bw");
+ o->bw_log_file, "bw");
} else
finish_log(td, td->bw_log, "bw");
}
if (td->lat_log) {
- if (td->o.lat_log_file) {
+ if (o->lat_log_file) {
finish_log_named(td, td->lat_log,
- td->o.lat_log_file, "lat");
+ o->lat_log_file, "lat");
} else
finish_log(td, td->lat_log, "lat");
}
if (td->slat_log) {
- if (td->o.lat_log_file) {
+ if (o->lat_log_file) {
finish_log_named(td, td->slat_log,
- td->o.lat_log_file, "slat");
+ o->lat_log_file, "slat");
} else
finish_log(td, td->slat_log, "slat");
}
if (td->clat_log) {
- if (td->o.lat_log_file) {
+ if (o->lat_log_file) {
finish_log_named(td, td->clat_log,
- td->o.lat_log_file, "clat");
+ o->lat_log_file, "clat");
} else
finish_log(td, td->clat_log, "clat");
}
if (td->iops_log) {
- if (td->o.iops_log_file) {
+ if (o->iops_log_file) {
finish_log_named(td, td->iops_log,
- td->o.iops_log_file, "iops");
+ o->iops_log_file, "iops");
} else
finish_log(td, td->iops_log, "iops");
}
fio_mutex_up(writeout_mutex);
- if (td->o.exec_postrun)
- exec_string(td->o.exec_postrun);
+ if (o->exec_postrun)
+ exec_string(o, o->exec_postrun, (const char *)"postrun");
if (exitall_on_terminate)
fio_terminate_threads(td->groupid);
log_info("fio: pid=%d, err=%d/%s\n", (int) td->pid, td->error,
td->verror);
- if (td->o.verify_async)
+ if (o->verify_async)
verify_async_exit(td);
close_and_free_files(td);
close_ioengine(td);
cgroup_shutdown(td, &cgroup_mnt);
- if (td->o.cpumask_set) {
- int ret = fio_cpuset_exit(&td->o.cpumask);
+ if (o->cpumask_set) {
+ int ret = fio_cpuset_exit(&o->cpumask);
td_verror(td, ret, "fio_cpuset_exit");
}
/*
* do this very late, it will log file closing as well
*/
- if (td->o.write_iolog_file)
+ if (o->write_iolog_file)
write_iolog_close(td);
+ fio_mutex_remove(td->rusage_sem);
+ td->rusage_sem = NULL;
+
td_set_runstate(td, TD_EXITED);
return (void *) (uintptr_t) td->error;
}
exit_value++;
done_secs += mtime_since_now(&td->epoch) / 1000;
+ profile_td_exit(td);
}
if (*nr_running == cputhreads && !pending && realthreads)
fio_terminate_threads(TERMINATE_ALL);
}
+static void do_usleep(unsigned int usecs)
+{
+ check_for_running_stats();
+ usleep(usecs);
+}
+
/*
* Main function for kicking off and reaping jobs, as needed.
*/
unsigned long spent;
unsigned int i, todo, nr_running, m_rate, t_rate, nr_started;
- if (fio_pin_memory())
- return;
-
if (fio_gtod_offload && fio_start_gtod_thread())
return;
-
+
fio_idle_prof_init();
set_sig_handlers();
+ nr_thread = nr_process = 0;
+ for_each_td(td, i) {
+ if (td->o.use_thread)
+ nr_thread++;
+ else
+ nr_process++;
+ }
+
if (output_format == FIO_OUTPUT_NORMAL) {
log_info("Starting ");
if (nr_thread)
init_disk_util(td);
+ td->rusage_sem = fio_mutex_init(FIO_MUTEX_LOCKED);
+ td->update_rusage = 0;
+
/*
* Set state to created. Thread will transition
* to TD_INITIALIZED when it's done setting up.
if (mtime_since_now(&this_start) > JOB_START_TIMEOUT)
break;
- usleep(100000);
+ do_usleep(100000);
for (i = 0; i < this_jobs; i++) {
td = map[i];
reap_threads(&nr_running, &t_rate, &m_rate);
- if (todo) {
- if (is_backend)
- fio_server_idle_loop();
- else
- usleep(100000);
- }
+ if (todo)
+ do_usleep(100000);
}
while (nr_running) {
reap_threads(&nr_running, &t_rate, &m_rate);
-
- if (is_backend)
- fio_server_idle_loop();
- else
- usleep(10000);
+ do_usleep(10000);
}
fio_idle_prof_stop();
update_io_ticks();
- fio_unpin_memory();
}
void wait_for_disk_thread_exit(void)
return 0;
if (write_bw_log) {
- setup_log(&agg_io_log[DDIR_READ], 0);
- setup_log(&agg_io_log[DDIR_WRITE], 0);
- setup_log(&agg_io_log[DDIR_TRIM], 0);
+ setup_log(&agg_io_log[DDIR_READ], 0, IO_LOG_TYPE_BW);
+ setup_log(&agg_io_log[DDIR_WRITE], 0, IO_LOG_TYPE_BW);
+ setup_log(&agg_io_log[DDIR_TRIM], 0, IO_LOG_TYPE_BW);
}
startup_mutex = fio_mutex_init(FIO_MUTEX_LOCKED);
return 1;
set_genesis_time();
+ stat_init();
create_disk_util_thread();
cgroup_list = smalloc(sizeof(*cgroup_list));
fio_mutex_remove(startup_mutex);
fio_mutex_remove(writeout_mutex);
fio_mutex_remove(disk_thread_mutex);
+ stat_exit();
return exit_value;
}