select HAVE_IRQ_TIME_ACCOUNTING
select GENERIC_TIME_VSYSCALL
select ARCH_CLOCKSOURCE_DATA
+ select HANDLE_DOMAIN_IRQ
menu "Machine selection"
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_MIPS16
- select SYS_SUPPORTS_ZBOOT
+ select SYS_SUPPORTS_ZBOOT_UART_PROM
select USE_OF
help
Support for the Atheros AR71XX/AR724X/AR913X SoCs.
select GPIOLIB
select LEDS_GPIO_REGISTER
select BCM47XX_NVRAM
+ select BCM47XX_SPROM
help
Support for BCM47XX based boards
select ARCH_REQUIRE_GPIOLIB
select SWAP_IO_SPACE
select BOOT_RAW
- select HAVE_MACH_CLKDEV
select CLKDEV_LOOKUP
select USE_OF
select PINCTRL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_MIPS_CPS
select SYS_SUPPORTS_MULTITHREADING
+ select SYS_SUPPORTS_RELOCATABLE
select SYS_SUPPORTS_ZBOOT
select SYS_HAS_EARLY_PRINTK
select USE_GENERIC_EARLY_PRINTK_8250
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_SMARTMIPS
select SYS_SUPPORTS_ZBOOT
+ select SYS_SUPPORTS_RELOCATABLE
select USE_OF
select ZONE_DMA32 if 64BIT
select BUILTIN_DTB
select MIPS_MSC
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS32_R6
select SYS_HAS_CPU_MIPS64_R1
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_SMARTMIPS
select SYS_SUPPORTS_MICROMIPS
select SYS_SUPPORTS_MIPS16
+ select SYS_SUPPORTS_RELOCATABLE
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
select USE_OF
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_MIPS16
select SYS_HAS_EARLY_PRINTK
- select HAVE_MACH_CLKDEV
select CLKDEV_LOOKUP
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
config HOLES_IN_ZONE
bool
+config SYS_SUPPORTS_RELOCATABLE
+ bool
+ help
+ Selected if the platform supports relocating the kernel.
+ The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
+ to allow access to command line and entropy sources.
+
#
# Endianness selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
select CPU_SUPPORTS_HUGEPAGES
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
+ select MIPS_PGD_C0_CONTEXT
select ARCH_REQUIRE_GPIOLIB
help
The Loongson 3 processor implements the MIPS64R2 instruction
set with many extensions.
+config LOONGSON3_ENHANCEMENT
+ bool "New Loongson 3 CPU Enhancements"
+ default n
+ select CPU_MIPSR2
+ select CPU_HAS_PREFETCH
+ depends on CPU_LOONGSON3
+ help
+ New Loongson 3 CPU (since Loongson-3A R2, as opposed to Loongson-3A
+ R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as
+ FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPv2 ASE, User
+ Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer),
+ Fast TLB refill support, etc.
+
+ This option enable those enhancements which are not probed at run
+ time. If you want a generic kernel to run on all Loongson 3 machines,
+ please say 'N' here. If you want a high-performance kernel to run on
+ new Loongson 3 machines only, please say 'Y' here.
+
config CPU_LOONGSON2E
bool "Loongson 2E"
depends on SYS_HAS_CPU_LOONGSON2E
bool "Loongson 1B"
depends on SYS_HAS_CPU_LOONGSON1B
select CPU_LOONGSON1
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select LEDS_GPIO_REGISTER
help
The Loongson 1B is a 32-bit SoC, which implements the MIPS32
release 2 instruction set.
select CPU_HAS_PREFETCH
select CPU_MIPSR2
select CPU_SUPPORTS_HUGEPAGES
+ select MIPS_ASID_BITS_VARIABLE
help
Netlogic Microsystems XLP processors.
endchoice
select MIPS_L1_CACHE_SHIFT_6
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
+ select CPU_HAS_RIXI
config CPU_BMIPS5000
bool
select MIPS_L1_CACHE_SHIFT_7
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
+ select CPU_HAS_RIXI
config SYS_HAS_CPU_LOONGSON3
bool
select CPU_SUPPORTS_CPUFREQ
+ select CPU_HAS_RIXI
config SYS_HAS_CPU_LOONGSON2E
bool
config CPU_MIPSR2
bool
default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
+ select CPU_HAS_RIXI
select MIPS_SPRAM
config CPU_MIPSR6
bool
default y if CPU_MIPS32_R6 || CPU_MIPS64_R6
+ select CPU_HAS_RIXI
+ select HAVE_ARCH_BITREVERSE
+ select MIPS_ASID_BITS_VARIABLE
select MIPS_SPRAM
config EVA
#
config HARDWARE_WATCHPOINTS
bool
- default y if CPU_MIPSR1 || CPU_MIPSR2
+ default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6
menu "Kernel type"
emulation when determining guest CPU Frequency. Instead, the guest's
timer frequency is specified directly.
+config MIPS_VA_BITS_48
+ bool "48 bits virtual memory"
+ depends on 64BIT
+ help
+ Support a maximum at least 48 bits of application virtual memory.
+ Default is 40 bits or less, depending on the CPU.
+ This option result in a small memory overhead for page tables.
+ This option is only supported with 16k and 64k page sizes.
+ If unsure, say N.
+
choice
prompt "Kernel page size"
default PAGE_SIZE_4KB
config PAGE_SIZE_4KB
bool "4kB"
depends on !CPU_LOONGSON2 && !CPU_LOONGSON3
+ depends on !MIPS_VA_BITS_48
help
This option select the standard 4kB Linux page size. On some
R3000-family processors this is the only available page size. Using
config PAGE_SIZE_8KB
bool "8kB"
depends on CPU_R8000 || CPU_CAVIUM_OCTEON
+ depends on !MIPS_VA_BITS_48
help
Using 8kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available
config PAGE_SIZE_32KB
bool "32kB"
depends on CPU_CAVIUM_OCTEON
+ depends on !MIPS_VA_BITS_48
help
Using 32kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available
config MIPS_CPS
bool "MIPS Coherent Processing System support"
- depends on SYS_SUPPORTS_MIPS_CPS && !CPU_MIPSR6
+ depends on SYS_SUPPORTS_MIPS_CPS
select MIPS_CM
select MIPS_CPC
select MIPS_CPS_PM if HOTPLUG_CPU
config XKS01
bool
+config CPU_HAS_RIXI
+ bool
+
#
# Vectored interrupt mode is an R2 feature
#
config CPU_R4400_WORKAROUNDS
bool
+config MIPS_ASID_SHIFT
+ int
+ default 6 if CPU_R3000 || CPU_TX39XX
+ default 4 if CPU_R8000
+ default 0
+
+config MIPS_ASID_BITS
+ int
+ default 0 if MIPS_ASID_BITS_VARIABLE
+ default 6 if CPU_R3000 || CPU_TX39XX
+ default 8
+
+config MIPS_ASID_BITS_VARIABLE
+ bool
+
#
# - Highmem only makes sense for the 32-bit kernel.
# - The current highmem code will only work properly on physically indexed
config SYS_SUPPORTS_NUMA
bool
+config RELOCATABLE
+ bool "Relocatable kernel"
+ depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6)
+ help
+ This builds a kernel image that retains relocation information
+ so it can be loaded someplace besides the default 1MB.
+ The relocations make the kernel binary about 15% larger,
+ but are discarded at runtime
+
+config RELOCATION_TABLE_SIZE
+ hex "Relocation table size"
+ depends on RELOCATABLE
+ range 0x0 0x01000000
+ default "0x00100000"
+ ---help---
+ A table of relocation data will be appended to the kernel binary
+ and parsed at boot to fix up the relocated kernel.
+
+ This option allows the amount of space reserved for the table to be
+ adjusted, although the default of 1Mb should be ok in most cases.
+
+ The build will fail and a valid size suggested if this is too small.
+
+ If unsure, leave at the default value.
+
+config RANDOMIZE_BASE
+ bool "Randomize the address of the kernel image"
+ depends on RELOCATABLE
+ ---help---
+ Randomizes the physical and virtual address at which the
+ kernel image is loaded, as a security feature that
+ deters exploit attempts relying on knowledge of the location
+ of kernel internals.
+
+ Entropy is generated using any coprocessor 0 registers available.
+
+ The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.
+
+ If unsure, say N.
+
+config RANDOMIZE_BASE_MAX_OFFSET
+ hex "Maximum kASLR offset" if EXPERT
+ depends on RANDOMIZE_BASE
+ range 0x0 0x40000000 if EVA || 64BIT
+ range 0x0 0x08000000
+ default "0x01000000"
+ ---help---
+ When kASLR is active, this provides the maximum offset that will
+ be applied to the kernel image. It should be set according to the
+ amount of physical RAM available in the target system minus
+ PHYSICAL_START and must be a power of 2.
+
+ This is limited by the size of KSEG0, 256Mb on 32-bit or 1Gb with
+ EVA or 64-bit. The default is 16Mb.
+
config NODES_SHIFT
int
default "6"
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON3)
+ depends on PERF_EVENTS && !OPROFILE && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON3)
default y
help
Enable hardware performance counter support for perf events. If
config MIPS_CMDLINE_FROM_BOOTLOADER
bool "Bootloader kernel arguments if available"
+
+ config MIPS_CMDLINE_BUILTIN_EXTEND
+ depends on CMDLINE_BOOL
+ bool "Extend builtin kernel arguments with bootloader arguments"
endchoice
endmenu
source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
-
#
# ISA support is now enabled via select. Too many systems still have the one
# or other ISA chip on the board that users don't know about so don't expect
source "drivers/pcmcia/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
-
config RAPIDIO
tristate "RapidIO support"
depends on PCI
projects / linux-2.6-block.git / blobdiff