CRIS: Drop support for the CRIS port

[linux-2.6-block.git] / arch / cris / include / arch-v32 / mach-a3 / mach / startup.inc

diff --git a/arch/cris/include/arch-v32/mach-a3/mach/startup.inc b/arch/cris/include/arch-v32/mach-a3/mach/startup.inc
deleted file mode 100644 (file)
index 2d52bcc..0000000
--- a/arch/cris/include/arch-v32/mach-a3/mach/startup.inc
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef STARTUP_INC_INCLUDED
-#define STARTUP_INC_INCLUDED
-
-#include <hwregs/asm/reg_map_asm.h>
-#include <hwregs/asm/gio_defs_asm.h>
-#include <hwregs/asm/pio_defs_asm.h>
-#include <hwregs/asm/clkgen_defs_asm.h>
-#include <hwregs/asm/pinmux_defs_asm.h>
-
-       .macro GIO_SET_P BITS, OUTREG
-       bmi     1f              ; btstq: bit -> N flag
-       nop
-       or.d    \BITS, \OUTREG
-1:
-       .endm
-
-       .macro GIO_INIT
-       move.d  CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0
-       move.d  REG_ADDR(gio, regi_gio, rw_pa_dout), $r1
-       move.d  $r0, [$r1]
-
-       move.d  CONFIG_ETRAX_DEF_GIO_PA_OE, $r0
-       move.d  REG_ADDR(gio, regi_gio, rw_pa_oe), $r1
-       move.d  $r0, [$r1]
-
-       move.d  CONFIG_ETRAX_DEF_GIO_PB_OUT, $r0
-       move.d  REG_ADDR(gio, regi_gio, rw_pb_dout), $r1
-       move.d  $r0, [$r1]
-
-       move.d  CONFIG_ETRAX_DEF_GIO_PB_OE, $r0
-       move.d  REG_ADDR(gio, regi_gio, rw_pb_oe), $r1
-       move.d  $r0, [$r1]
-
-       move.d  CONFIG_ETRAX_DEF_GIO_PC_OUT, $r0
-       move.d  REG_ADDR(gio, regi_gio, rw_pc_dout), $r1
-       move.d  $r0, [$r1]
-
-       move.d  CONFIG_ETRAX_DEF_GIO_PC_OE, $r0
-       move.d  REG_ADDR(gio, regi_gio, rw_pc_oe), $r1
-       move.d  $r0, [$r1]
-
-       move.d  0xFFFFFFFF, $r0
-       move.d  REG_ADDR(pinmux, regi_pinmux, rw_gio_pa), $r1
-       move.d  $r0, [$r1]
-       move.d  REG_ADDR(pinmux, regi_pinmux, rw_gio_pc), $r1
-       move.d  $r0, [$r1]
-
-       ;; If eth_mdio, eth, geth bits are set in hwprot, don't
-       ;; set them to gpio, as this means they have been configured
-       ;; earlier and shouldn't be changed.
-       move.d  0xFC000000, $r2 ; pins 25..0 are eth_mdio, eth, geth
-       move.d  REG_ADDR(pinmux, regi_pinmux, rw_hwprot), $r1
-       move.d  [$r1], $r0
-       btstq   REG_BIT(pinmux, rw_hwprot, eth), $r0
-       GIO_SET_P 0x00FFFF00, $r2               ;; pins 8..23 are eth
-       btstq   REG_BIT(pinmux, rw_hwprot, eth_mdio), $r0
-       GIO_SET_P 0x03000000, $r2               ;; pins 24..25 are eth_mdio
-       btstq   REG_BIT(pinmux, rw_hwprot, geth), $r0
-       GIO_SET_P 0x000000FF, $r2               ;; pins 0..7 are geth
-       move.d  REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1
-       move.d  $r2, [$r1]
-       .endm
-
-       .macro START_CLOCKS
-       move.d REG_ADDR(clkgen, regi_clkgen, rw_clk_ctrl), $r1
-       move.d [$r1], $r0
-       or.d REG_STATE(clkgen, rw_clk_ctrl, cpu, yes) | \
-            REG_STATE(clkgen, rw_clk_ctrl, ddr2, yes) | \
-            REG_STATE(clkgen, rw_clk_ctrl, memarb_bar_ddr, yes), $r0
-       move.d $r0, [$r1]
-       .endm
-
-       .macro SETUP_WAIT_STATES
-       move.d REG_ADDR(pio, regi_pio, rw_ce0_cfg), $r0
-       move.d CONFIG_ETRAX_PIO_CE0_CFG, $r1
-       move.d $r1, [$r0]
-       move.d REG_ADDR(pio, regi_pio, rw_ce1_cfg), $r0
-       move.d CONFIG_ETRAX_PIO_CE1_CFG, $r1
-       move.d $r1, [$r0]
-       move.d REG_ADDR(pio, regi_pio, rw_ce2_cfg), $r0
-       move.d CONFIG_ETRAX_PIO_CE2_CFG, $r1
-       move.d $r1, [$r0]
-       .endm
-#endif