#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/usb/atmel_usba_udc.h>
+#include <linux/atmel-mci.h>
-#include <asm/atmel-mci.h>
#include <asm/io.h>
#include <asm/irq.h>
DEFINE_DEV(pio, 4);
DEV_CLK(mck, pio4, pba, 14);
-void __init at32_add_system_devices(void)
+static int __init system_device_init(void)
{
platform_device_register(&at32_pm0_device);
platform_device_register(&at32_intc0_device);
platform_device_register(&pio2_device);
platform_device_register(&pio3_device);
platform_device_register(&pio4_device);
+
+ return 0;
}
+core_initcall(system_device_init);
/* --------------------------------------------------------------------
* PSIF
{
u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
- select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+ select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static inline void configure_usart1_pins(void)
{
u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
- select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+ select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
}
static inline void configure_usart2_pins(void)
{
u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
- select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+ select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static inline void configure_usart3_pins(void)
{
u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
- select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+ select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static struct platform_device *__initdata at32_usarts[4];
pin_mask |= (1 << 11); /* RXD2 */
pin_mask |= (1 << 12); /* RXD3 */
pin_mask |= (1 << 14); /* RXCK */
+#ifndef CONFIG_BOARD_MIMC200
pin_mask |= (1 << 18); /* SPD */
+#endif
}
select_peripheral(PIOC, pin_mask, PERIPH_A, 0);
pin_mask |= (1 << 3); /* MDC */
pin_mask |= (1 << 2); /* MDIO */
+#ifndef CONFIG_BOARD_MIMC200
if (!data->is_rmii)
pin_mask |= (1 << 15); /* SPD */
+#endif
select_peripheral(PIOD, pin_mask, PERIPH_B, 0);
pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL;
/* LCDC on port C */
- portc_mask = (pin_mask & 0xfff80000) >> 19;
+ portc_mask = pin_mask & 0xfff80000;
select_peripheral(PIOC, portc_mask, PERIPH_A, 0);
/* LCDC on port D */