Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen...

[linux-2.6-block.git] / arch / avr32 / boards / atstk1000 / atstk1002.c

diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 8538ba75ef92c8a1def6ee96caea4557618ae061..32aceec0ae72f8bc8e61b522fec24d07aee4bbc0 100644 (file)
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -23,10 +23,10 @@
 #include <asm/setup.h>
 #include <asm/atmel-mci.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
@@ -49,7 +49,7 @@ unsigned long at32_board_osc_rates[3] = {
  */
 #ifdef CONFIG_BOARD_ATSTK1006
 #include <linux/mtd/partitions.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing nand_timing __initdata = {
        .ncs_read_setup         = 0,
@@ -96,7 +96,7 @@ static struct mtd_partition *nand_part_info(int size, int *num_partitions)
        return nand_partitions;
 }
 
-struct atmel_nand_data atstk1006_nand_data __initdata = {
+static struct atmel_nand_data atstk1006_nand_data __initdata = {
        .cle            = 21,
        .ale            = 22,
        .rdy_pin        = GPIO_PIN_PB(30),
@@ -264,16 +264,20 @@ void __init setup_board(void)
 
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 
+static struct mci_platform_data __initdata mci0_data = {
+       .slot[0] = {
+               .bus_width      = 4,
+
 /* MMC card detect requires MACB0 *NOT* be used */
 #ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
-static struct mci_platform_data __initdata mci0_data = {
-       .detect_pin     = GPIO_PIN_PC(14),      /* gpio30/sdcd */
-       .wp_pin         = GPIO_PIN_PC(15),      /* gpio31/sdwp */
-};
-#define MCI_PDATA      &mci0_data
+               .detect_pin     = GPIO_PIN_PC(14), /* gpio30/sdcd */
+               .wp_pin         = GPIO_PIN_PC(15), /* gpio31/sdwp */
 #else
-#define MCI_PDATA      NULL
+               .detect_pin     = -ENODEV,
+               .wp_pin         = -ENODEV,
 #endif /* SW6 for sd{cd,wp} routing */
+       },
+};
 
 #endif /* SW2 for MMC signal routing */
 
@@ -325,14 +329,15 @@ static int __init atstk1002_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
        at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-       at32_add_device_mci(0, MCI_PDATA);
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+       at32_add_device_mci(0, &mci0_pdata);
 #endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
        set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 #else
        at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-                            fbmem_start, fbmem_size, 0);
+                            fbmem_start, fbmem_size,
+                            ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
 #endif
        at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM