Merge tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman...

[linux-2.6-block.git] / arch / arm64 / boot / dts / amlogic / meson-axg-s400.dts

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 57eedced5a5168fbc72fc1224be13e7d12b80aa5..b3e1bdca32bb3ff7b43a65f82330b2186326713e 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -15,6 +15,53 @@
                serial0 = &uart_AO;
                serial1 = &uart_A;
        };
+
+       vddio_boot: regulator-vddio_boot {
+               compatible = "regulator-fixed";
+               regulator-name = "VDDIO_BOOT";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+       };
+
+       vddao_3v3: regulator-vddao_3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "VDDAO_3V3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+
+       vddio_ao18: regulator-vddio_ao18 {
+               compatible = "regulator-fixed";
+               regulator-name = "VDDIO_AO18";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+       };
+
+       vcc_3v3: regulator-vcc_3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "VCC_3V3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+
+       emmc_pwrseq: emmc-pwrseq {
+               compatible = "mmc-pwrseq-emmc";
+               reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+       };
+
+       sdio_pwrseq: sdio-pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+               clocks = <&wifi32k>;
+               clock-names = "ext_clock";
+       };
+
+       wifi32k: wifi32k {
+               compatible = "pwm-clock";
+               #clock-cells = <0>;
+               clock-frequency = <32768>;
+               pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
+       };
 };
 
 &ethmac {
@@ -47,3 +94,56 @@
        pinctrl-0 = <&i2c1_z_pins>;
        pinctrl-names = "default";
 };
+
+&pwm_ab {
+       status = "okay";
+       pinctrl-0 = <&pwm_a_x20_pins>;
+       pinctrl-names = "default";
+};
+
+/* emmc storage */
+&sd_emmc_c {
+       status = "okay";
+       pinctrl-0 = <&emmc_pins>;
+       pinctrl-1 = <&emmc_clk_gate_pins>;
+       pinctrl-names = "default", "clk-gate";
+
+       bus-width = <8>;
+       cap-sd-highspeed;
+       cap-mmc-highspeed;
+       max-frequency = <180000000>;
+       non-removable;
+       disable-wp;
+       mmc-ddr-1_8v;
+       mmc-hs200-1_8v;
+
+       vmmc-supply = <&vcc_3v3>;
+       vqmmc-supply = <&vddio_boot>;
+};
+
+/* wifi module */
+&sd_emmc_b {
+       status = "okay";
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       pinctrl-0 = <&sdio_pins>;
+       pinctrl-1 = <&sdio_clk_gate_pins>;
+       pinctrl-names = "default", "clk-gate";
+
+       bus-width = <4>;
+       cap-sd-highspeed;
+       max-frequency = <100000000>;
+       non-removable;
+       disable-wp;
+
+       mmc-pwrseq = <&sdio_pwrseq>;
+
+       vmmc-supply = <&vddao_3v3>;
+       vqmmc-supply = <&vddio_boot>;
+
+       brcmf: wifi@1 {
+               reg = <1>;
+               compatible = "brcm,bcm4329-fmac";
+       };
+};