[ARM] 4325/1: S3C24XX: remove s3c24xx_board

[linux-2.6-block.git] / arch / arm / mach-s3c2440 / mach-anubis.c

diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 0f4e2882aa13f06f7b11d6908b51280cb36a350d..b5d387ef37e14046968fed05c34dd8264ba9d2c8 100644 (file)
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -281,11 +281,6 @@ static struct clk *anubis_clocks[] = {
        &s3c24xx_uclk,
 };
 
-static struct s3c24xx_board anubis_board __initdata = {
-       .devices       = anubis_devices,
-       .devices_count = ARRAY_SIZE(anubis_devices),
-};
-
 static void __init anubis_map_io(void)
 {
        /* initialise the clocks */
@@ -308,18 +303,24 @@ static void __init anubis_map_io(void)
        s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
        s3c24xx_init_clocks(0);
        s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
-       s3c24xx_set_board(&anubis_board);
 
        /* ensure that the GPIO is setup */
        s3c2410_gpio_setpin(S3C2410_GPA0, 1);
 }
 
+static void __init anubis_init(void)
+{
+       platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+}
+
+
 MACHINE_START(ANUBIS, "Simtec-Anubis")
        /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
        .phys_io        = S3C2410_PA_UART,
        .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
        .boot_params    = S3C2410_SDRAM_PA + 0x100,
        .map_io         = anubis_map_io,
+       .init_machine   = anubis_init,
        .init_irq       = s3c24xx_init_irq,
        .timer          = &s3c24xx_timer,
 MACHINE_END