ARM: dts: BCM5301X: Add DT for ASUS RT-AC3100

[linux-block.git] / arch / arm / boot / dts / broadcom / bcm47094-asus-rt-ac88u.dts

diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
index 4d5747aa5dc828df123e42468733c2e3fea6f374..fd344b55087e29f4fc21612044965f65840dac27 100644 (file)
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
@@ -1,102 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright (C) 2021-2022 Arınç ÜNAL <arinc.unal@arinc9.com>
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
  */
 
 /dts-v1/;
 
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include "bcm47094-asus-rt-ac3100.dtsi"
 
 / {
        compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
-       model = "Asus RT-AC88U";
-
-       chosen {
-               bootargs = "earlycon";
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x00000000 0x08000000>,
-                     <0x88000000 0x18000000>;
-       };
+       model = "ASUS RT-AC88U";
 
        nvram@1c080000 {
-               compatible = "brcm,nvram";
-               reg = <0x1c080000 0x00180000>;
-
                et1macaddr: et1macaddr {
                };
        };
 
-       leds {
-               compatible = "gpio-leds";
-
-               led-power {
-                       label = "white:power";
-                       gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "default-on";
-               };
-
-               led-wan-red {
-                       label = "red:wan";
-                       gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-               };
-
-               led-lan {
-                       label = "white:lan";
-                       gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
-               };
-
-               led-usb2 {
-                       label = "white:usb2";
-                       gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-                       trigger-sources = <&ehci_port2>;
-                       linux,default-trigger = "usbport";
-               };
-
-               led-usb3 {
-                       label = "white:usb3";
-                       gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-                       trigger-sources = <&ehci_port1>, <&xhci_port1>;
-                       linux,default-trigger = "usbport";
-               };
-
-               led-wps {
-                       label = "white:wps";
-                       gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-
-               button-wps {
-                       label = "WPS";
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-               };
-
-               button-reset {
-                       label = "Reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-               };
-
-               button-wifi {
-                       label = "Wi-Fi";
-                       linux,code = <KEY_RFKILL>;
-                       gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-               };
-
-               button-led {
-                       label = "Backlight";
-                       linux,code = <KEY_BRIGHTNESS_ZERO>;
-                       gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-               };
-       };
-
        switch {
                compatible = "realtek,rtl8365mb";
                /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
@@ -175,31 +94,9 @@
 };
 
 &srab {
-       compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-       status = "okay";
        dsa,member = <0 0>;
 
        ports {
-               port@0 {
-                       label = "lan4";
-               };
-
-               port@1 {
-                       label = "lan3";
-               };
-
-               port@2 {
-                       label = "lan2";
-               };
-
-               port@3 {
-                       label = "lan1";
-               };
-
-               port@4 {
-                       label = "wan";
-               };
-
                sw0_p5: port@5 {
                        /delete-property/ethernet;
 
@@ -212,19 +109,6 @@
                                pause;
                        };
                };
-
-               port@7 {
-                       label = "cpu";
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               port@8 {
-                       label = "cpu";
-               };
        };
 };
 
@@ -236,36 +120,3 @@
        nvmem-cells = <&et1macaddr>;
        nvmem-cell-names = "mac-address";
 };
-
-&usb2 {
-       vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_phy {
-       status = "okay";
-};
-
-&nandcs {
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "boot";
-                       reg = <0x00000000 0x00080000>;
-                       read-only;
-               };
-
-               partition@80000 {
-                       label = "nvram";
-                       reg = <0x00080000 0x00180000>;
-               };
-
-               partition@200000 {
-                       label = "firmware";
-                       reg = <0x00200000 0x07e00000>;
-                       compatible = "brcm,trx";
-               };
-       };
-};