More X86-64 boot options can be found in
Documentation/x86/x86_64/boot-options.txt .
X86 Either 32-bit or 64-bit x86 (same as X86-32+X86-64)
+ X86_UV SGI UV support is enabled.
XEN Xen support is enabled
In addition, the following text indicates that the option:
acpi= [HW,ACPI,X86,ARM64]
Advanced Configuration and Power Interface
- Format: { force | off | strict | noirq | rsdt |
+ Format: { force | on | off | strict | noirq | rsdt |
copy_dsdt }
force -- enable ACPI if default was off
+ on -- enable ACPI but allow fallback to DT [arm64]
off -- disable ACPI if default was on
noirq -- do not use ACPI for IRQ routing
strict -- Be less tolerant of platforms that are not
strictly ACPI specification compliant.
rsdt -- prefer RSDT over (default) XSDT
copy_dsdt -- copy DSDT to memory
- For ARM64, ONLY "acpi=off" or "acpi=force" are available
+ For ARM64, ONLY "acpi=off", "acpi=on" or "acpi=force"
+ are available
See also Documentation/power/runtime_pm.txt, pci=noacpi
acpi_osi=!* # remove all strings
acpi_osi=! # disable all built-in OS vendor
strings
+ acpi_osi=!! # enable all built-in OS vendor
+ strings
acpi_osi= # disable all strings
'acpi_osi=!' can be used in combination with single or
Format: <int> (must be >=0)
Default: 64
+ bau= [X86_UV] Enable the BAU on SGI UV. The default
+ behavior is to disable the BAU (i.e. bau=0).
+ Format: { "0" | "1" }
+ 0 - Disable the BAU.
+ 1 - Enable the BAU.
+ unset - Disable the BAU.
+
baycom_epp= [HW,AX25]
Format: <io>,<mode>
hwp_only
Only load intel_pstate on systems which support
hardware P state control (HWP) if available.
+ support_acpi_ppc
+ Enforce ACPI _PPC performance limits. If the Fixed ACPI
+ Description Table, specifies preferred power management
+ profile as "Enterprise Server" or "Performance Server",
+ then this feature is turned on by default.
intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)