+.TP
+.BI (rdma)verb \fR=\fPstr
+The RDMA verb to use on this side of the RDMA ioengine
+connection. Valid values are write, read, send and recv. These
+correspond to the equivalent RDMA verbs (e.g. write = rdma_write
+etc.). Note that this only needs to be specified on the client side of
+the connection. See the examples folder.
+.TP
+.BI (rdma)bindname \fR=\fPstr
+The name to use to bind the local RDMA-CM connection to a local RDMA
+device. This could be a hostname or an IPv4 or IPv6 address. On the
+server side this will be passed into the rdma_bind_addr() function and
+on the client site it will be used in the rdma_resolve_add()
+function. This can be useful when multiple paths exist between the
+client and the server or in certain loopback configurations.
+.TP
+.BI (sg)readfua \fR=\fPbool
+With readfua option set to 1, read operations include the force
+unit access (fua) flag. Default: 0.
+.TP
+.BI (sg)writefua \fR=\fPbool
+With writefua option set to 1, write operations include the force
+unit access (fua) flag. Default: 0.
+.TP
+.BI (sg)sg_write_mode \fR=\fPstr
+Specify the type of write commands to issue. This option can take three
+values:
+.RS
+.RS
+.TP
+.B write (default)
+Write opcodes are issued as usual
+.TP
+.B verify
+Issue WRITE AND VERIFY commands. The BYTCHK bit is set to 0. This
+directs the device to carry out a medium verification with no data
+comparison. The writefua option is ignored with this selection.
+.TP
+.B same
+Issue WRITE SAME commands. This transfers a single block to the device
+and writes this same block of data to a contiguous sequence of LBAs
+beginning at the specified offset. fio's block size parameter
+specifies the amount of data written with each command. However, the
+amount of data actually transferred to the device is equal to the
+device's block (sector) size. For a device with 512 byte sectors,
+blocksize=8k will write 16 sectors with each command. fio will still
+generate 8k of data for each command butonly the first 512 bytes will
+be used and transferred to the device. The writefua option is ignored
+with this selection.
+