2 # SPDX-License-Identifier: GPL-2.0
6 # vmlinux is linked from the objects selected by $(KBUILD_VMLINUX_OBJS) and
7 # $(KBUILD_VMLINUX_LIBS). Most are built-in.a files from top-level directories
8 # in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
9 # $(KBUILD_VMLINUX_LIBS) are archives which are linked conditionally
10 # (not within --whole-archive), and do not require symbol indexes added.
15 # +--< $(KBUILD_VMLINUX_OBJS)
16 # | +--< init/built-in.a drivers/built-in.a mm/built-in.a + more
18 # +--< $(KBUILD_VMLINUX_LIBS)
19 # | +--< lib/lib.a + more
21 # +-< ${kallsymso} (see description in KALLSYMS section)
23 # vmlinux version (uname -v) cannot be updated during normal
24 # descending-into-subdirs phase since we do not yet know if we need to
26 # Therefore this step is delayed until just before final link of vmlinux.
28 # System.map is generated to document addresses of all kernel symbols
38 grep -q "^$1=y" include/config/auto.conf
41 # Nice output in kbuild format
42 # Will be supressed by "make -s"
45 printf " %-7s %s\n" "${1}" "${2}"
48 # Generate a linker script to ensure correct ordering of initcalls.
51 info GEN .tmp_initcalls.lds
53 ${PYTHON3} ${srctree}/scripts/jobserver-exec \
54 ${PERL} ${srctree}/scripts/generate_initcall_order.pl \
55 ${KBUILD_VMLINUX_OBJS} ${KBUILD_VMLINUX_LIBS} \
59 # Link of vmlinux.o used for section mismatch analysis
66 objects="--whole-archive \
67 ${KBUILD_VMLINUX_OBJS} \
70 ${KBUILD_VMLINUX_LIBS} \
73 if is_enabled CONFIG_LTO_CLANG; then
75 lds="-T .tmp_initcalls.lds"
77 # This might take a while, so indicate that we're doing
84 ${LD} ${KBUILD_LDFLAGS} -r -o ${1} ${lds} ${objects}
92 if ! is_enabled CONFIG_OBJTOOL; then
96 if is_enabled CONFIG_LTO_CLANG || is_enabled CONFIG_X86_KERNEL_IBT; then
98 # For LTO and IBT, objtool doesn't run on individual
99 # translation units. Run everything on vmlinux instead.
101 if is_enabled CONFIG_HAVE_JUMP_LABEL_HACK; then
102 objtoolopt="${objtoolopt} --hacks=jump_label"
105 if is_enabled CONFIG_HAVE_NOINSTR_HACK; then
106 objtoolopt="${objtoolopt} --hacks=noinstr"
109 if is_enabled CONFIG_X86_KERNEL_IBT; then
110 objtoolopt="${objtoolopt} --ibt"
113 if is_enabled CONFIG_FTRACE_MCOUNT_USE_OBJTOOL; then
114 objtoolopt="${objtoolopt} --mcount"
117 if is_enabled CONFIG_UNWINDER_ORC; then
118 objtoolopt="${objtoolopt} --orc"
121 if is_enabled CONFIG_RETPOLINE; then
122 objtoolopt="${objtoolopt} --retpoline"
125 if is_enabled CONFIG_SLS; then
126 objtoolopt="${objtoolopt} --sls"
129 if is_enabled CONFIG_STACK_VALIDATION; then
130 objtoolopt="${objtoolopt} --stackval"
133 if is_enabled CONFIG_HAVE_STATIC_CALL_INLINE; then
134 objtoolopt="${objtoolopt} --static-call"
137 objtoolopt="${objtoolopt} --uaccess"
140 if is_enabled CONFIG_NOINSTR_VALIDATION; then
141 objtoolopt="${objtoolopt} --noinstr"
144 if [ -n "${objtoolopt}" ]; then
146 if is_enabled CONFIG_GCOV_KERNEL; then
147 objtoolopt="${objtoolopt} --no-unreachable"
150 objtoolopt="${objtoolopt} --link"
153 tools/objtool/objtool ${objtoolopt} ${1}
159 # ${2}, ${3}, ... - optional extra .o files
171 # skip output file argument
174 if is_enabled CONFIG_LTO_CLANG || is_enabled CONFIG_X86_KERNEL_IBT; then
175 # Use vmlinux.o instead of performing the slow LTO link again.
179 objs="${KBUILD_VMLINUX_OBJS}"
180 libs="${KBUILD_VMLINUX_LIBS}"
183 if is_enabled CONFIG_MODULES; then
184 objs="${objs} .vmlinux.export.o"
187 if [ "${SRCARCH}" = "um" ]; then
190 ldflags="${CFLAGS_vmlinux}"
191 ldlibs="-lutil -lrt -lpthread"
195 ldflags="${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux}"
199 ldflags="${ldflags} ${wl}--script=${objtree}/${KBUILD_LDS}"
201 # The kallsyms linking does not need debug symbols included.
202 if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
203 ldflags="${ldflags} ${wl}--strip-debug"
206 if is_enabled CONFIG_VMLINUX_MAP; then
207 ldflags="${ldflags} ${wl}-Map=${output}.map"
210 ${ld} ${ldflags} -o ${output} \
211 ${wl}--whole-archive ${objs} ${wl}--no-whole-archive \
212 ${wl}--start-group ${libs} ${wl}--end-group \
216 # generate .BTF typeinfo from DWARF debuginfo
217 # ${1} - vmlinux image
218 # ${2} - file to dump raw BTF data into
223 if ! [ -x "$(command -v ${PAHOLE})" ]; then
224 echo >&2 "BTF: ${1}: pahole (${PAHOLE}) is not available"
228 pahole_ver=$(${PAHOLE} --version | sed -E 's/v([0-9]+)\.([0-9]+)/\1\2/')
229 if [ "${pahole_ver}" -lt "116" ]; then
230 echo >&2 "BTF: ${1}: pahole version $(${PAHOLE} --version) is too old, need at least v1.16"
237 LLVM_OBJCOPY="${OBJCOPY}" ${PAHOLE} -J ${PAHOLE_FLAGS} ${1}
239 # Create ${2} which contains just .BTF section but no symbols. Add
240 # SHF_ALLOC because .BTF will be part of the vmlinux image. --strip-all
241 # deletes all symbols including __start_BTF and __stop_BTF, which will
242 # be redefined in the linker script. Add 2>/dev/null to suppress GNU
243 # objcopy warnings: "empty loadable segment detected at ..."
244 ${OBJCOPY} --only-section=.BTF --set-section-flags .BTF=alloc,readonly \
245 --strip-all ${1} ${2} 2>/dev/null
246 # Change e_type to ET_REL so that it can be used to link final vmlinux.
247 # Unlike GNU ld, lld does not allow an ET_EXEC input.
248 printf '\1' | dd of=${2} conv=notrunc bs=1 seek=16 status=none
251 # Create ${2} .S file with all symbols from the ${1} object file
256 if is_enabled CONFIG_KALLSYMS_ALL; then
257 kallsymopt="${kallsymopt} --all-symbols"
260 if is_enabled CONFIG_KALLSYMS_ABSOLUTE_PERCPU; then
261 kallsymopt="${kallsymopt} --absolute-percpu"
264 if is_enabled CONFIG_KALLSYMS_BASE_RELATIVE; then
265 kallsymopt="${kallsymopt} --base-relative"
269 ${NM} -n ${1} | scripts/kallsyms ${kallsymopt} > ${2}
272 # Perform one step in kallsyms generation, including temporary linking of
276 kallsymso_prev=${kallsymso}
277 kallsyms_vmlinux=.tmp_vmlinux.kallsyms${1}
278 kallsymso=${kallsyms_vmlinux}.o
279 kallsyms_S=${kallsyms_vmlinux}.S
281 vmlinux_link ${kallsyms_vmlinux} "${kallsymso_prev}" ${btf_vmlinux_bin_o}
282 kallsyms ${kallsyms_vmlinux} ${kallsyms_S}
284 info AS ${kallsyms_S}
285 ${CC} ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS} \
286 ${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \
287 -c -o ${kallsymso} ${kallsyms_S}
290 # Create map file with all symbols from ${1}
291 # See mksymap for additional details
294 ${CONFIG_SHELL} "${srctree}/scripts/mksysmap" ${1} ${2}
299 ${objtree}/scripts/sorttable ${1}
302 # Delete output files in case of error
306 rm -f .tmp_System.map
307 rm -f .tmp_initcalls.lds
315 rm -f .vmlinux.export.c
318 # Use "make V=1" to debug this script
319 case "${KBUILD_VERBOSE}" in
325 if [ "$1" = "clean" ]; then
332 if [ -r .version ]; then
333 VERSION=$(expr 0$(cat .version) + 1)
334 echo $VERSION > .version
340 # final build of init/
341 ${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init need-builtin=1
344 modpost_link vmlinux.o
345 objtool_link vmlinux.o
347 # Generate the list of objects in vmlinux
348 for f in ${KBUILD_VMLINUX_OBJS} ${KBUILD_VMLINUX_LIBS}; do
357 # modpost vmlinux.o to check for section mismatches
358 ${MAKE} -f "${srctree}/scripts/Makefile.modpost" MODPOST_VMLINUX=1
360 info MODINFO modules.builtin.modinfo
361 ${OBJCOPY} -j .modinfo -O binary vmlinux.o modules.builtin.modinfo
362 info GEN modules.builtin
363 # The second line aids cases where multiple modules share the same object.
364 tr '\0' '\n' < modules.builtin.modinfo | sed -n 's/^[[:alnum:]:_]*\.file=//p' |
365 tr ' ' '\n' | uniq | sed -e 's:^:kernel/:' -e 's/$/.ko/' > modules.builtin
367 if is_enabled CONFIG_MODULES; then
368 ${MAKE} -f "${srctree}/scripts/Makefile.vmlinux" .vmlinux.export.o
372 if is_enabled CONFIG_DEBUG_INFO_BTF; then
373 btf_vmlinux_bin_o=.btf.vmlinux.bin.o
374 if ! gen_btf .tmp_vmlinux.btf $btf_vmlinux_bin_o ; then
375 echo >&2 "Failed to generate BTF for vmlinux"
376 echo >&2 "Try to disable CONFIG_DEBUG_INFO_BTF"
384 if is_enabled CONFIG_KALLSYMS; then
387 # Generate section listing all symbols and add it into vmlinux
388 # It's a three step process:
389 # 1) Link .tmp_vmlinux.kallsyms1 so it has all symbols and sections,
390 # but __kallsyms is empty.
391 # Running kallsyms on that gives us .tmp_kallsyms1.o with
393 # 2) Link .tmp_vmlinux.kallsyms2 so it now has a __kallsyms section of
394 # the right size, but due to the added section, some
395 # addresses have shifted.
396 # From here, we generate a correct .tmp_vmlinux.kallsyms2.o
397 # 3) That link may have expanded the kernel image enough that
398 # more linker branch stubs / trampolines had to be added, which
399 # introduces new names, which further expands kallsyms. Do another
400 # pass if that is the case. In theory it's possible this results
401 # in even more stubs, but unlikely.
402 # KALLSYMS_EXTRA_PASS=1 may also used to debug or work around
404 # 4) The correct ${kallsymso} is linked into the final vmlinux.
406 # a) Verify that the System.map from vmlinux matches the map from
413 size1=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso_prev})
414 size2=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso})
416 if [ $size1 -ne $size2 ] || [ -n "${KALLSYMS_EXTRA_PASS}" ]; then
421 vmlinux_link vmlinux "${kallsymso}" ${btf_vmlinux_bin_o}
424 if is_enabled CONFIG_DEBUG_INFO_BTF && is_enabled CONFIG_BPF; then
426 ${RESOLVE_BTFIDS} vmlinux
429 info SYSMAP System.map
430 mksysmap vmlinux System.map
432 if is_enabled CONFIG_BUILDTIME_TABLE_SORT; then
434 if ! sorttable vmlinux; then
435 echo >&2 Failed to sort kernel tables
440 # step a (see comment above)
441 if is_enabled CONFIG_KALLSYMS; then
442 mksysmap ${kallsyms_vmlinux} .tmp_System.map
444 if ! cmp -s System.map .tmp_System.map; then
445 echo >&2 Inconsistent kallsyms data
446 echo >&2 Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
452 echo "vmlinux: $0" > .vmlinux.d