tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
[linux-2.6-block.git] / scripts / Makefile.build
1 # SPDX-License-Identifier: GPL-2.0
2 # ==========================================================================
3 # Building
4 # ==========================================================================
5
6 src := $(obj)
7
8 PHONY := __build
9 __build:
10
11 # Init all relevant variables used in kbuild files so
12 # 1) they have correct type
13 # 2) they do not inherit any value from the environment
14 obj-y :=
15 obj-m :=
16 lib-y :=
17 lib-m :=
18 always :=
19 targets :=
20 subdir-y :=
21 subdir-m :=
22 EXTRA_AFLAGS   :=
23 EXTRA_CFLAGS   :=
24 EXTRA_CPPFLAGS :=
25 EXTRA_LDFLAGS  :=
26 asflags-y  :=
27 ccflags-y  :=
28 cppflags-y :=
29 ldflags-y  :=
30
31 subdir-asflags-y :=
32 subdir-ccflags-y :=
33
34 # Read auto.conf if it exists, otherwise ignore
35 -include include/config/auto.conf
36
37 include scripts/Kbuild.include
38
39 # For backward compatibility check that these variables do not change
40 save-cflags := $(CFLAGS)
41
42 # The filename Kbuild has precedence over Makefile
43 kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
44 kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
45 include $(kbuild-file)
46
47 # If the save-* variables changed error out
48 ifeq ($(KBUILD_NOPEDANTIC),)
49         ifneq ("$(save-cflags)","$(CFLAGS)")
50                 $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y)
51         endif
52 endif
53
54 include scripts/Makefile.lib
55
56 ifdef host-progs
57 ifneq ($(hostprogs-y),$(host-progs))
58 $(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
59 hostprogs-y += $(host-progs)
60 endif
61 endif
62
63 # Do not include host rules unless needed
64 ifneq ($(hostprogs-y)$(hostprogs-m)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),)
65 include scripts/Makefile.host
66 endif
67
68 ifndef obj
69 $(warning kbuild: Makefile.build is included improperly)
70 endif
71
72 # ===========================================================================
73
74 ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
75 lib-target := $(obj)/lib.a
76 real-obj-y += $(obj)/lib-ksyms.o
77 endif
78
79 ifneq ($(strip $(real-obj-y) $(need-builtin)),)
80 builtin-target := $(obj)/built-in.a
81 endif
82
83 modorder-target := $(obj)/modules.order
84
85 # We keep a list of all modules in $(MODVERDIR)
86
87 __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
88          $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
89          $(subdir-ym) $(always)
90         @:
91
92 # Linus' kernel sanity checking tool
93 ifneq ($(KBUILD_CHECKSRC),0)
94   ifeq ($(KBUILD_CHECKSRC),2)
95     quiet_cmd_force_checksrc = CHECK   $<
96           cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
97   else
98       quiet_cmd_checksrc     = CHECK   $<
99             cmd_checksrc     = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
100   endif
101 endif
102
103 ifneq ($(KBUILD_ENABLE_EXTRA_GCC_CHECKS),)
104   cmd_checkdoc = $(srctree)/scripts/kernel-doc -none $< ;
105 endif
106
107 # Do section mismatch analysis for each module/built-in.a
108 ifdef CONFIG_DEBUG_SECTION_MISMATCH
109   cmd_secanalysis = ; scripts/mod/modpost $@
110 endif
111
112 # Compile C sources (.c)
113 # ---------------------------------------------------------------------------
114
115 # Default is built-in, unless we know otherwise
116 modkern_cflags =                                          \
117         $(if $(part-of-module),                           \
118                 $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
119                 $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL))
120 quiet_modtag := $(empty)   $(empty)
121
122 $(real-obj-m)        : part-of-module := y
123 $(real-obj-m:.o=.i)  : part-of-module := y
124 $(real-obj-m:.o=.s)  : part-of-module := y
125 $(real-obj-m:.o=.lst): part-of-module := y
126
127 $(real-obj-m)        : quiet_modtag := [M]
128 $(real-obj-m:.o=.i)  : quiet_modtag := [M]
129 $(real-obj-m:.o=.s)  : quiet_modtag := [M]
130 $(real-obj-m:.o=.lst): quiet_modtag := [M]
131
132 $(obj-m)             : quiet_modtag := [M]
133
134 quiet_cmd_cc_s_c = CC $(quiet_modtag)  $@
135 cmd_cc_s_c       = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
136
137 $(obj)/%.s: $(src)/%.c FORCE
138         $(call if_changed_dep,cc_s_c)
139
140 quiet_cmd_cpp_i_c = CPP $(quiet_modtag) $@
141 cmd_cpp_i_c       = $(CPP) $(c_flags) -o $@ $<
142
143 $(obj)/%.i: $(src)/%.c FORCE
144         $(call if_changed_dep,cpp_i_c)
145
146 # These mirror gensymtypes_S and co below, keep them in synch.
147 cmd_gensymtypes_c =                                                         \
148     $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
149     $(GENKSYMS) $(if $(1), -T $(2))                                         \
150      $(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS))                             \
151      $(if $(KBUILD_PRESERVE),-p)                                            \
152      -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
153
154 quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
155 cmd_cc_symtypes_c =                                                         \
156     set -e;                                                                 \
157     $(call cmd_gensymtypes_c,true,$@) >/dev/null;                           \
158     test -s $@ || rm -f $@
159
160 $(obj)/%.symtypes : $(src)/%.c FORCE
161         $(call cmd,cc_symtypes_c)
162
163 # LLVM assembly
164 # Generate .ll files from .c
165 quiet_cmd_cc_ll_c = CC $(quiet_modtag)  $@
166       cmd_cc_ll_c = $(CC) $(c_flags) -emit-llvm -S -o $@ $<
167
168 $(obj)/%.ll: $(src)/%.c FORCE
169         $(call if_changed_dep,cc_ll_c)
170
171 # C (.c) files
172 # The C file is compiled and updated dependency information is generated.
173 # (See cmd_cc_o_c + relevant part of rule_cc_o_c)
174
175 quiet_cmd_cc_o_c = CC $(quiet_modtag)  $@
176
177 ifndef CONFIG_MODVERSIONS
178 cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
179
180 else
181 # When module versioning is enabled the following steps are executed:
182 # o compile a .tmp_<file>.o from <file>.c
183 # o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
184 #   not export symbols, we just rename .tmp_<file>.o to <file>.o and
185 #   are done.
186 # o otherwise, we calculate symbol versions using the good old
187 #   genksyms on the preprocessed source and postprocess them in a way
188 #   that they are usable as a linker script
189 # o generate <file>.o from .tmp_<file>.o using the linker to
190 #   replace the unresolved symbols __crc_exported_symbol with
191 #   the actual value of the checksum generated by genksyms
192
193 cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
194
195 cmd_modversions_c =                                                             \
196         if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then             \
197                 $(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))  \
198                     > $(@D)/.tmp_$(@F:.o=.ver);                                 \
199                                                                                 \
200                 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F)                      \
201                         -T $(@D)/.tmp_$(@F:.o=.ver);                            \
202                 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);                \
203         else                                                                    \
204                 mv -f $(@D)/.tmp_$(@F) $@;                                      \
205         fi;
206 endif
207
208 ifdef CONFIG_FTRACE_MCOUNT_RECORD
209 ifndef CC_USING_RECORD_MCOUNT
210 # compiler will not generate __mcount_loc use recordmcount or recordmcount.pl
211 ifdef BUILD_C_RECORDMCOUNT
212 ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
213   RECORDMCOUNT_FLAGS = -w
214 endif
215 # Due to recursion, we must skip empty.o.
216 # The empty.o file is created in the make process in order to determine
217 # the target endianness and word size. It is made before all other C
218 # files, including recordmcount.
219 sub_cmd_record_mcount =                                 \
220         if [ $(@) != "scripts/mod/empty.o" ]; then      \
221                 $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)";   \
222         fi;
223 recordmcount_source := $(srctree)/scripts/recordmcount.c \
224                     $(srctree)/scripts/recordmcount.h
225 else
226 sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
227         "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
228         "$(if $(CONFIG_64BIT),64,32)" \
229         "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
230         "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
231         "$(if $(part-of-module),1,0)" "$(@)";
232 recordmcount_source := $(srctree)/scripts/recordmcount.pl
233 endif # BUILD_C_RECORDMCOUNT
234 cmd_record_mcount =                                             \
235         if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" =   \
236              "$(CC_FLAGS_FTRACE)" ]; then                       \
237                 $(sub_cmd_record_mcount)                        \
238         fi;
239 endif # CC_USING_RECORD_MCOUNT
240 endif # CONFIG_FTRACE_MCOUNT_RECORD
241
242 ifdef CONFIG_STACK_VALIDATION
243 ifneq ($(SKIP_STACK_VALIDATION),1)
244
245 __objtool_obj := $(objtree)/tools/objtool/objtool
246
247 objtool_args = $(if $(CONFIG_UNWINDER_ORC),orc generate,check)
248
249 objtool_args += $(if $(part-of-module), --module,)
250
251 ifndef CONFIG_FRAME_POINTER
252 objtool_args += --no-fp
253 endif
254 ifdef CONFIG_GCOV_KERNEL
255 objtool_args += --no-unreachable
256 else
257 objtool_args += $(call cc-ifversion, -lt, 0405, --no-unreachable)
258 endif
259 ifdef CONFIG_RETPOLINE
260 ifneq ($(RETPOLINE_CFLAGS),)
261   objtool_args += --retpoline
262 endif
263 endif
264
265
266 ifdef CONFIG_MODVERSIONS
267 objtool_o = $(@D)/.tmp_$(@F)
268 else
269 objtool_o = $(@)
270 endif
271
272 # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
273 # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
274 # 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
275 cmd_objtool = $(if $(patsubst y%,, \
276         $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
277         $(__objtool_obj) $(objtool_args) "$(objtool_o)";)
278 objtool_obj = $(if $(patsubst y%,, \
279         $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
280         $(__objtool_obj))
281
282 endif # SKIP_STACK_VALIDATION
283 endif # CONFIG_STACK_VALIDATION
284
285 # Rebuild all objects when objtool changes, or is enabled/disabled.
286 objtool_dep = $(objtool_obj)                                    \
287               $(wildcard include/config/orc/unwinder.h          \
288                          include/config/stack/validation.h)
289
290 define rule_cc_o_c
291         $(call echo-cmd,checksrc) $(cmd_checksrc)                         \
292         $(call cmd_and_fixdep,cc_o_c)                                     \
293         $(cmd_checkdoc)                                                   \
294         $(call echo-cmd,objtool) $(cmd_objtool)                           \
295         $(cmd_modversions_c)                                              \
296         $(call echo-cmd,record_mcount) $(cmd_record_mcount)
297 endef
298
299 define rule_as_o_S
300         $(call cmd_and_fixdep,as_o_S)                                     \
301         $(call echo-cmd,objtool) $(cmd_objtool)                           \
302         $(cmd_modversions_S)
303 endef
304
305 # List module undefined symbols (or empty line if not enabled)
306 ifdef CONFIG_TRIM_UNUSED_KSYMS
307 cmd_undef_syms = $(NM) $@ | sed -n 's/^  *U //p' | xargs echo
308 else
309 cmd_undef_syms = echo
310 endif
311
312 # Built-in and composite module parts
313 $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
314         $(call cmd,force_checksrc)
315         $(call if_changed_rule,cc_o_c)
316
317 # Single-part modules are special since we need to mark them in $(MODVERDIR)
318
319 $(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
320         $(call cmd,force_checksrc)
321         $(call if_changed_rule,cc_o_c)
322         @{ echo $(@:.o=.ko); echo $@; \
323            $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
324
325 quiet_cmd_cc_lst_c = MKLST   $@
326       cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
327                      $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
328                                      System.map $(OBJDUMP) > $@
329
330 $(obj)/%.lst: $(src)/%.c FORCE
331         $(call if_changed_dep,cc_lst_c)
332
333 # Compile assembler sources (.S)
334 # ---------------------------------------------------------------------------
335
336 modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)
337
338 $(real-obj-m)      : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
339 $(real-obj-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
340
341 # .S file exports must have their C prototypes defined in asm/asm-prototypes.h
342 # or a file that it includes, in order to get versioned symbols. We build a
343 # dummy C file that includes asm-prototypes and the EXPORT_SYMBOL lines from
344 # the .S file (with trailing ';'), and run genksyms on that, to extract vers.
345 #
346 # This is convoluted. The .S file must first be preprocessed to run guards and
347 # expand names, then the resulting exports must be constructed into plain
348 # EXPORT_SYMBOL(symbol); to build our dummy C file, and that gets preprocessed
349 # to make the genksyms input.
350 #
351 # These mirror gensymtypes_c and co above, keep them in synch.
352 cmd_gensymtypes_S =                                                         \
353     (echo "\#include <linux/kernel.h>" ;                                    \
354      echo "\#include <asm/asm-prototypes.h>" ;                              \
355     $(CPP) $(a_flags) $< |                                                  \
356      grep "\<___EXPORT_SYMBOL\>" |                                          \
357      sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ) | \
358     $(CPP) -D__GENKSYMS__ $(c_flags) -xc - |                                \
359     $(GENKSYMS) $(if $(1), -T $(2))                                         \
360      $(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS))                             \
361      $(if $(KBUILD_PRESERVE),-p)                                            \
362      -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
363
364 quiet_cmd_cc_symtypes_S = SYM $(quiet_modtag) $@
365 cmd_cc_symtypes_S =                                                         \
366     set -e;                                                                 \
367     $(call cmd_gensymtypes_S,true,$@) >/dev/null;                           \
368     test -s $@ || rm -f $@
369
370 $(obj)/%.symtypes : $(src)/%.S FORCE
371         $(call cmd,cc_symtypes_S)
372
373
374 quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@
375 cmd_cpp_s_S       = $(CPP) $(a_flags) -o $@ $<
376
377 $(obj)/%.s: $(src)/%.S FORCE
378         $(call if_changed_dep,cpp_s_S)
379
380 quiet_cmd_as_o_S = AS $(quiet_modtag)  $@
381
382 ifndef CONFIG_MODVERSIONS
383 cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
384
385 else
386
387 ASM_PROTOTYPES := $(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/asm-prototypes.h)
388
389 ifeq ($(ASM_PROTOTYPES),)
390 cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
391
392 else
393
394 # versioning matches the C process described above, with difference that
395 # we parse asm-prototypes.h C header to get function definitions.
396
397 cmd_as_o_S = $(CC) $(a_flags) -c -o $(@D)/.tmp_$(@F) $<
398
399 cmd_modversions_S =                                                             \
400         if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then             \
401                 $(call cmd_gensymtypes_S,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))  \
402                     > $(@D)/.tmp_$(@F:.o=.ver);                                 \
403                                                                                 \
404                 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F)                      \
405                         -T $(@D)/.tmp_$(@F:.o=.ver);                            \
406                 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);                \
407         else                                                                    \
408                 mv -f $(@D)/.tmp_$(@F) $@;                                      \
409         fi;
410 endif
411 endif
412
413 $(obj)/%.o: $(src)/%.S $(objtool_dep) FORCE
414         $(call if_changed_rule,as_o_S)
415
416 targets += $(filter-out $(subdir-obj-y), $(real-obj-y)) $(real-obj-m) $(lib-y)
417 targets += $(extra-y) $(MAKECMDGOALS) $(always)
418
419 # Linker scripts preprocessor (.lds.S -> .lds)
420 # ---------------------------------------------------------------------------
421 quiet_cmd_cpp_lds_S = LDS     $@
422       cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
423                              -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
424
425 $(obj)/%.lds: $(src)/%.lds.S FORCE
426         $(call if_changed_dep,cpp_lds_S)
427
428 # ASN.1 grammar
429 # ---------------------------------------------------------------------------
430 quiet_cmd_asn1_compiler = ASN.1   $@
431       cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
432                                 $(subst .h,.c,$@) $(subst .c,.h,$@)
433
434 $(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
435         $(call cmd,asn1_compiler)
436
437 # Build the compiled-in targets
438 # ---------------------------------------------------------------------------
439
440 # To build objects in subdirs, we need to descend into the directories
441 $(sort $(subdir-obj-y)): $(subdir-ym) ;
442
443 #
444 # Rule to compile a set of .o files into one .o file
445 #
446 ifdef builtin-target
447
448 # built-in.a archives are made with no symbol table or index which
449 # makes them small and fast, but unable to be used by the linker.
450 # scripts/link-vmlinux.sh builds an aggregate built-in.a with a symbol
451 # table and index.
452 quiet_cmd_ar_builtin = AR      $@
453       cmd_ar_builtin = rm -f $@; \
454                      $(AR) rcSTP$(KBUILD_ARFLAGS) $@ $(filter $(real-obj-y), $^)
455
456 $(builtin-target): $(real-obj-y) FORCE
457         $(call if_changed,ar_builtin)
458
459 targets += $(builtin-target)
460 endif # builtin-target
461
462 #
463 # Rule to create modules.order file
464 #
465 # Create commands to either record .ko file or cat modules.order from
466 # a subdirectory
467 modorder-cmds =                                         \
468         $(foreach m, $(modorder),                       \
469                 $(if $(filter %/modules.order, $m),     \
470                         cat $m;, echo kernel/$m;))
471
472 $(modorder-target): $(subdir-ym) FORCE
473         $(Q)(cat /dev/null; $(modorder-cmds)) > $@
474
475 #
476 # Rule to compile a set of .o files into one .a file
477 #
478 ifdef lib-target
479 quiet_cmd_link_l_target = AR      $@
480
481 # lib target archives do get a symbol table and index
482 cmd_link_l_target = rm -f $@; $(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(lib-y)
483
484 $(lib-target): $(lib-y) FORCE
485         $(call if_changed,link_l_target)
486
487 targets += $(lib-target)
488
489 dummy-object = $(obj)/.lib_exports.o
490 ksyms-lds = $(dot-target).lds
491
492 quiet_cmd_export_list = EXPORTS $@
493 cmd_export_list = $(OBJDUMP) -h $< | \
494         sed -ne '/___ksymtab/s/.*+\([^ ]*\).*/EXTERN(\1)/p' >$(ksyms-lds);\
495         rm -f $(dummy-object);\
496         echo | $(CC) $(a_flags) -c -o $(dummy-object) -x assembler -;\
497         $(LD) $(ld_flags) -r -o $@ -T $(ksyms-lds) $(dummy-object);\
498         rm $(dummy-object) $(ksyms-lds)
499
500 $(obj)/lib-ksyms.o: $(lib-target) FORCE
501         $(call if_changed,export_list)
502
503 targets += $(obj)/lib-ksyms.o
504
505 endif
506
507 #
508 # Rule to link composite objects
509 #
510 #  Composite objects are specified in kbuild makefile as follows:
511 #    <composite-object>-objs := <list of .o files>
512 #  or
513 #    <composite-object>-y    := <list of .o files>
514 #  or
515 #    <composite-object>-m    := <list of .o files>
516 #  The -m syntax only works if <composite object> is a module
517 link_multi_deps =                     \
518 $(filter $(addprefix $(obj)/,         \
519 $($(subst $(obj)/,,$(@:.o=-objs)))    \
520 $($(subst $(obj)/,,$(@:.o=-y)))       \
521 $($(subst $(obj)/,,$(@:.o=-m)))), $^)
522
523 quiet_cmd_link_multi-m = LD [M]  $@
524 cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
525
526 $(multi-used-m): FORCE
527         $(call if_changed,link_multi-m)
528         @{ echo $(@:.o=.ko); echo $(link_multi_deps); \
529            $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
530 $(call multi_depend, $(multi-used-m), .o, -objs -y -m)
531
532 targets += $(multi-used-m)
533 targets := $(filter-out $(PHONY), $(targets))
534
535 # Add intermediate targets:
536 # When building objects with specific suffix patterns, add intermediate
537 # targets that the final targets are derived from.
538 intermediate_targets = $(foreach sfx, $(2), \
539                                 $(patsubst %$(strip $(1)),%$(sfx), \
540                                         $(filter %$(strip $(1)), $(targets))))
541 # %.asn1.o <- %.asn1.[ch] <- %.asn1
542 # %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
543 # %.lex.o <- %.lex.c <- %.l
544 # %.tab.o <- %.tab.[ch] <- %.y
545 targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \
546            $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \
547            $(call intermediate_targets, .lex.o, .lex.c) \
548            $(call intermediate_targets, .tab.o, .tab.c .tab.h)
549
550 # Descending
551 # ---------------------------------------------------------------------------
552
553 PHONY += $(subdir-ym)
554 $(subdir-ym):
555         $(Q)$(MAKE) $(build)=$@ need-builtin=$(if $(findstring $@,$(subdir-obj-y)),1)
556
557 # Add FORCE to the prequisites of a target to force it to be always rebuilt.
558 # ---------------------------------------------------------------------------
559
560 PHONY += FORCE
561
562 FORCE:
563
564 # Read all saved command lines and dependencies for the $(targets) we
565 # may be building above, using $(if_changed{,_dep}). As an
566 # optimization, we don't need to read them if the target does not
567 # exist, we will rebuild anyway in that case.
568
569 cmd_files := $(wildcard $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd))
570
571 ifneq ($(cmd_files),)
572   include $(cmd_files)
573 endif
574
575 ifneq ($(KBUILD_SRC),)
576 # Create directories for object files if they do not exist
577 obj-dirs := $(sort $(obj) $(patsubst %/,%, $(dir $(targets))))
578 # If cmd_files exist, their directories apparently exist.  Skip mkdir.
579 exist-dirs := $(sort $(patsubst %/,%, $(dir $(cmd_files))))
580 obj-dirs := $(strip $(filter-out $(exist-dirs), $(obj-dirs)))
581 ifneq ($(obj-dirs),)
582 $(shell mkdir -p $(obj-dirs))
583 endif
584 endif
585
586 # Some files contained in $(targets) are intermediate artifacts.
587 # We never want them to be removed automatically.
588 .SECONDARY: $(targets)
589
590 .PHONY: $(PHONY)