1 // SPDX-License-Identifier: GPL-2.0-only
3 * BSS client mode implementation
4 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
5 * Copyright 2004, Instant802 Networks, Inc.
6 * Copyright 2005, Devicescape Software, Inc.
7 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
8 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9 * Copyright 2013-2014 Intel Mobile Communications GmbH
10 * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
11 * Copyright (C) 2018 - 2020 Intel Corporation
14 #include <linux/delay.h>
15 #include <linux/fips.h>
16 #include <linux/if_ether.h>
17 #include <linux/skbuff.h>
18 #include <linux/if_arp.h>
19 #include <linux/etherdevice.h>
20 #include <linux/moduleparam.h>
21 #include <linux/rtnetlink.h>
22 #include <linux/crc32.h>
23 #include <linux/slab.h>
24 #include <linux/export.h>
25 #include <net/mac80211.h>
26 #include <asm/unaligned.h>
28 #include "ieee80211_i.h"
29 #include "driver-ops.h"
32 #include "fils_aead.h"
34 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
35 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
36 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
37 #define IEEE80211_AUTH_TIMEOUT_SAE (HZ * 2)
38 #define IEEE80211_AUTH_MAX_TRIES 3
39 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
40 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
41 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
42 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
43 #define IEEE80211_ASSOC_MAX_TRIES 3
45 static int max_nullfunc_tries = 2;
46 module_param(max_nullfunc_tries, int, 0644);
47 MODULE_PARM_DESC(max_nullfunc_tries,
48 "Maximum nullfunc tx tries before disconnecting (reason 4).");
50 static int max_probe_tries = 5;
51 module_param(max_probe_tries, int, 0644);
52 MODULE_PARM_DESC(max_probe_tries,
53 "Maximum probe tries before disconnecting (reason 4).");
56 * Beacon loss timeout is calculated as N frames times the
57 * advertised beacon interval. This may need to be somewhat
58 * higher than what hardware might detect to account for
59 * delays in the host processing frames. But since we also
60 * probe on beacon miss before declaring the connection lost
61 * default to what we want.
63 static int beacon_loss_count = 7;
64 module_param(beacon_loss_count, int, 0644);
65 MODULE_PARM_DESC(beacon_loss_count,
66 "Number of beacon intervals before we decide beacon was lost.");
69 * Time the connection can be idle before we probe
70 * it to see if we can still talk to the AP.
72 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
74 * Time we wait for a probe response after sending
75 * a probe request because of beacon loss or for
76 * checking the connection still works.
78 static int probe_wait_ms = 500;
79 module_param(probe_wait_ms, int, 0644);
80 MODULE_PARM_DESC(probe_wait_ms,
81 "Maximum time(ms) to wait for probe response"
82 " before disconnecting (reason 4).");
85 * How many Beacon frames need to have been used in average signal strength
86 * before starting to indicate signal change events.
88 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
91 * We can have multiple work items (and connection probing)
92 * scheduling this timer, but we need to take care to only
93 * reschedule it when it should fire _earlier_ than it was
94 * asked for before, or if it's not pending right now. This
95 * function ensures that. Note that it then is required to
96 * run this function for all timeouts after the first one
97 * has happened -- the work that runs from this timer will
100 static void run_again(struct ieee80211_sub_if_data *sdata,
101 unsigned long timeout)
103 sdata_assert_lock(sdata);
105 if (!timer_pending(&sdata->u.mgd.timer) ||
106 time_before(timeout, sdata->u.mgd.timer.expires))
107 mod_timer(&sdata->u.mgd.timer, timeout);
110 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
112 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
115 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
118 mod_timer(&sdata->u.mgd.bcn_mon_timer,
119 round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
122 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
124 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
126 if (unlikely(!ifmgd->associated))
129 if (ifmgd->probe_send_count)
130 ifmgd->probe_send_count = 0;
132 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
135 mod_timer(&ifmgd->conn_mon_timer,
136 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
139 static int ecw2cw(int ecw)
141 return (1 << ecw) - 1;
145 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
146 struct ieee80211_supported_band *sband,
147 struct ieee80211_channel *channel,
149 const struct ieee80211_ht_operation *ht_oper,
150 const struct ieee80211_vht_operation *vht_oper,
151 const struct ieee80211_he_operation *he_oper,
152 const struct ieee80211_s1g_oper_ie *s1g_oper,
153 struct cfg80211_chan_def *chandef, bool tracking)
155 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
156 struct cfg80211_chan_def vht_chandef;
157 struct ieee80211_sta_ht_cap sta_ht_cap;
160 memset(chandef, 0, sizeof(struct cfg80211_chan_def));
161 chandef->chan = channel;
162 chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
163 chandef->center_freq1 = channel->center_freq;
164 chandef->freq1_offset = channel->freq_offset;
166 if (channel->band == NL80211_BAND_6GHZ) {
167 if (!ieee80211_chandef_he_6ghz_oper(sdata, he_oper, chandef))
168 ret = IEEE80211_STA_DISABLE_HT |
169 IEEE80211_STA_DISABLE_VHT |
170 IEEE80211_STA_DISABLE_HE;
173 vht_chandef = *chandef;
175 } else if (sband->band == NL80211_BAND_S1GHZ) {
176 if (!ieee80211_chandef_s1g_oper(s1g_oper, chandef)) {
178 "Missing S1G Operation Element? Trying operating == primary\n");
179 chandef->width = ieee80211_s1g_channel_width(channel);
182 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_40MHZ |
183 IEEE80211_STA_DISABLE_VHT |
184 IEEE80211_STA_DISABLE_80P80MHZ |
185 IEEE80211_STA_DISABLE_160MHZ;
189 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
190 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
192 if (!ht_oper || !sta_ht_cap.ht_supported) {
193 ret = IEEE80211_STA_DISABLE_HT |
194 IEEE80211_STA_DISABLE_VHT |
195 IEEE80211_STA_DISABLE_HE;
199 chandef->width = NL80211_CHAN_WIDTH_20;
201 ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
203 /* check that channel matches the right operating channel */
204 if (!tracking && channel->center_freq != ht_cfreq) {
206 * It's possible that some APs are confused here;
207 * Netgear WNDR3700 sometimes reports 4 higher than
208 * the actual channel in association responses, but
209 * since we look at probe response/beacon data here
213 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
214 channel->center_freq, ht_cfreq,
215 ht_oper->primary_chan, channel->band);
216 ret = IEEE80211_STA_DISABLE_HT |
217 IEEE80211_STA_DISABLE_VHT |
218 IEEE80211_STA_DISABLE_HE;
222 /* check 40 MHz support, if we have it */
223 if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
224 ieee80211_chandef_ht_oper(ht_oper, chandef);
226 /* 40 MHz (and 80 MHz) must be supported for VHT */
227 ret = IEEE80211_STA_DISABLE_VHT;
228 /* also mark 40 MHz disabled */
229 ret |= IEEE80211_STA_DISABLE_40MHZ;
233 if (!vht_oper || !sband->vht_cap.vht_supported) {
234 ret = IEEE80211_STA_DISABLE_VHT;
238 vht_chandef = *chandef;
239 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && he_oper &&
240 (le32_to_cpu(he_oper->he_oper_params) &
241 IEEE80211_HE_OPERATION_VHT_OPER_INFO)) {
242 struct ieee80211_vht_operation he_oper_vht_cap;
245 * Set only first 3 bytes (other 2 aren't used in
246 * ieee80211_chandef_vht_oper() anyway)
248 memcpy(&he_oper_vht_cap, he_oper->optional, 3);
249 he_oper_vht_cap.basic_mcs_set = cpu_to_le16(0);
251 if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info,
252 &he_oper_vht_cap, ht_oper,
254 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
256 "HE AP VHT information is invalid, disable HE\n");
257 ret = IEEE80211_STA_DISABLE_HE;
260 } else if (!ieee80211_chandef_vht_oper(&sdata->local->hw,
264 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
266 "AP VHT information is invalid, disable VHT\n");
267 ret = IEEE80211_STA_DISABLE_VHT;
271 if (!cfg80211_chandef_valid(&vht_chandef)) {
272 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
274 "AP VHT information is invalid, disable VHT\n");
275 ret = IEEE80211_STA_DISABLE_VHT;
279 if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
284 if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
285 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
287 "AP VHT information doesn't match HT, disable VHT\n");
288 ret = IEEE80211_STA_DISABLE_VHT;
292 *chandef = vht_chandef;
298 * When tracking the current AP, don't do any further checks if the
299 * new chandef is identical to the one we're currently using for the
300 * connection. This keeps us from playing ping-pong with regulatory,
301 * without it the following can happen (for example):
302 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
303 * - AP advertises regdom US
304 * - CRDA loads regdom US with 80 MHz prohibited (old database)
305 * - the code below detects an unsupported channel, downgrades, and
306 * we disconnect from the AP in the caller
307 * - disconnect causes CRDA to reload world regdomain and the game
309 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
311 * It seems possible that there are still scenarios with CSA or real
312 * bandwidth changes where a this could happen, but those cases are
313 * less common and wouldn't completely prevent using the AP.
316 cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
319 /* don't print the message below for VHT mismatch if VHT is disabled */
320 if (ret & IEEE80211_STA_DISABLE_VHT)
321 vht_chandef = *chandef;
324 * Ignore the DISABLED flag when we're already connected and only
325 * tracking the APs beacon for bandwidth changes - otherwise we
326 * might get disconnected here if we connect to an AP, update our
327 * regulatory information based on the AP's country IE and the
328 * information we have is wrong/outdated and disables the channel
329 * that we're actually using for the connection to the AP.
331 while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
333 IEEE80211_CHAN_DISABLED)) {
334 if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
335 ret = IEEE80211_STA_DISABLE_HT |
336 IEEE80211_STA_DISABLE_VHT |
337 IEEE80211_STA_DISABLE_HE;
341 ret |= ieee80211_chandef_downgrade(chandef);
344 if (!he_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef,
345 IEEE80211_CHAN_NO_HE))
346 ret |= IEEE80211_STA_DISABLE_HE;
348 if (chandef->width != vht_chandef.width && !tracking)
350 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
352 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
356 static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
357 struct sta_info *sta,
358 const struct ieee80211_ht_cap *ht_cap,
359 const struct ieee80211_vht_cap *vht_cap,
360 const struct ieee80211_ht_operation *ht_oper,
361 const struct ieee80211_vht_operation *vht_oper,
362 const struct ieee80211_he_operation *he_oper,
363 const struct ieee80211_s1g_oper_ie *s1g_oper,
364 const u8 *bssid, u32 *changed)
366 struct ieee80211_local *local = sdata->local;
367 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
368 struct ieee80211_channel *chan = sdata->vif.bss_conf.chandef.chan;
369 struct ieee80211_supported_band *sband =
370 local->hw.wiphy->bands[chan->band];
371 struct cfg80211_chan_def chandef;
374 enum ieee80211_sta_rx_bandwidth new_sta_bw;
375 u32 vht_cap_info = 0;
378 /* if HT was/is disabled, don't track any bandwidth changes */
379 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
382 /* don't check VHT if we associated as non-VHT station */
383 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
386 /* don't check HE if we associated as non-HE station */
387 if (ifmgd->flags & IEEE80211_STA_DISABLE_HE ||
388 !ieee80211_get_he_sta_cap(sband))
391 if (WARN_ON_ONCE(!sta))
395 * if bss configuration changed store the new one -
396 * this may be applicable even if channel is identical
398 ht_opmode = le16_to_cpu(ht_oper->operation_mode);
399 if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
400 *changed |= BSS_CHANGED_HT;
401 sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
405 vht_cap_info = le32_to_cpu(vht_cap->vht_cap_info);
407 /* calculate new channel (type) based on HT/VHT/HE operation IEs */
408 flags = ieee80211_determine_chantype(sdata, sband, chan, vht_cap_info,
409 ht_oper, vht_oper, he_oper,
410 s1g_oper, &chandef, true);
413 * Downgrade the new channel if we associated with restricted
414 * capabilities. For example, if we associated as a 20 MHz STA
415 * to a 40 MHz AP (due to regulatory, capabilities or config
416 * reasons) then switching to a 40 MHz channel now won't do us
417 * any good -- we couldn't use it with the AP.
419 if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
420 chandef.width == NL80211_CHAN_WIDTH_80P80)
421 flags |= ieee80211_chandef_downgrade(&chandef);
422 if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
423 chandef.width == NL80211_CHAN_WIDTH_160)
424 flags |= ieee80211_chandef_downgrade(&chandef);
425 if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
426 chandef.width > NL80211_CHAN_WIDTH_20)
427 flags |= ieee80211_chandef_downgrade(&chandef);
429 if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
433 "AP %pM changed bandwidth, new config is %d.%03d MHz, "
434 "width %d (%d.%03d/%d MHz)\n",
435 ifmgd->bssid, chandef.chan->center_freq,
436 chandef.chan->freq_offset, chandef.width,
437 chandef.center_freq1, chandef.freq1_offset,
438 chandef.center_freq2);
440 if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
441 IEEE80211_STA_DISABLE_VHT |
442 IEEE80211_STA_DISABLE_HE |
443 IEEE80211_STA_DISABLE_40MHZ |
444 IEEE80211_STA_DISABLE_80P80MHZ |
445 IEEE80211_STA_DISABLE_160MHZ)) ||
446 !cfg80211_chandef_valid(&chandef)) {
448 "AP %pM changed bandwidth in a way we can't support - disconnect\n",
453 switch (chandef.width) {
454 case NL80211_CHAN_WIDTH_20_NOHT:
455 case NL80211_CHAN_WIDTH_20:
456 new_sta_bw = IEEE80211_STA_RX_BW_20;
458 case NL80211_CHAN_WIDTH_40:
459 new_sta_bw = IEEE80211_STA_RX_BW_40;
461 case NL80211_CHAN_WIDTH_80:
462 new_sta_bw = IEEE80211_STA_RX_BW_80;
464 case NL80211_CHAN_WIDTH_80P80:
465 case NL80211_CHAN_WIDTH_160:
466 new_sta_bw = IEEE80211_STA_RX_BW_160;
472 if (new_sta_bw > sta->cur_max_bandwidth)
473 new_sta_bw = sta->cur_max_bandwidth;
475 if (new_sta_bw < sta->sta.bandwidth) {
476 sta->sta.bandwidth = new_sta_bw;
477 rate_control_rate_update(local, sband, sta,
478 IEEE80211_RC_BW_CHANGED);
481 ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
484 "AP %pM changed bandwidth to incompatible one - disconnect\n",
489 if (new_sta_bw > sta->sta.bandwidth) {
490 sta->sta.bandwidth = new_sta_bw;
491 rate_control_rate_update(local, sband, sta,
492 IEEE80211_RC_BW_CHANGED);
498 /* frame sending functions */
500 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
501 struct sk_buff *skb, u8 ap_ht_param,
502 struct ieee80211_supported_band *sband,
503 struct ieee80211_channel *channel,
504 enum ieee80211_smps_mode smps)
507 u32 flags = channel->flags;
509 struct ieee80211_sta_ht_cap ht_cap;
511 BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
513 memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
514 ieee80211_apply_htcap_overrides(sdata, &ht_cap);
516 /* determine capability flags */
519 switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
520 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
521 if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
522 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
523 cap &= ~IEEE80211_HT_CAP_SGI_40;
526 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
527 if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
528 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
529 cap &= ~IEEE80211_HT_CAP_SGI_40;
535 * If 40 MHz was disabled associate as though we weren't
536 * capable of 40 MHz -- some broken APs will never fall
537 * back to trying to transmit in 20 MHz.
539 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) {
540 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
541 cap &= ~IEEE80211_HT_CAP_SGI_40;
544 /* set SM PS mode properly */
545 cap &= ~IEEE80211_HT_CAP_SM_PS;
547 case IEEE80211_SMPS_AUTOMATIC:
548 case IEEE80211_SMPS_NUM_MODES:
551 case IEEE80211_SMPS_OFF:
552 cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
553 IEEE80211_HT_CAP_SM_PS_SHIFT;
555 case IEEE80211_SMPS_STATIC:
556 cap |= WLAN_HT_CAP_SM_PS_STATIC <<
557 IEEE80211_HT_CAP_SM_PS_SHIFT;
559 case IEEE80211_SMPS_DYNAMIC:
560 cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
561 IEEE80211_HT_CAP_SM_PS_SHIFT;
565 /* reserve and fill IE */
566 pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
567 ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
570 /* This function determines vht capability flags for the association
572 * Note - the function may set the owner of the MU-MIMO capability
574 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
576 struct ieee80211_supported_band *sband,
577 struct ieee80211_vht_cap *ap_vht_cap)
579 struct ieee80211_local *local = sdata->local;
582 struct ieee80211_sta_vht_cap vht_cap;
583 u32 mask, ap_bf_sts, our_bf_sts;
585 BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
587 memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
588 ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
590 /* determine capability flags */
593 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) {
594 u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
596 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
597 if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
598 bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
599 cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
602 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) {
603 cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
604 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
608 * Some APs apparently get confused if our capabilities are better
609 * than theirs, so restrict what we advertise in the assoc request.
611 if (!(ap_vht_cap->vht_cap_info &
612 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
613 cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
614 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
615 else if (!(ap_vht_cap->vht_cap_info &
616 cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
617 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
620 * If some other vif is using the MU-MIMO capablity we cannot associate
621 * using MU-MIMO - this will lead to contradictions in the group-id
623 * Ownership is defined since association request, in order to avoid
624 * simultaneous associations with MU-MIMO.
626 if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) {
627 bool disable_mu_mimo = false;
628 struct ieee80211_sub_if_data *other;
630 list_for_each_entry_rcu(other, &local->interfaces, list) {
631 if (other->vif.mu_mimo_owner) {
632 disable_mu_mimo = true;
637 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
639 sdata->vif.mu_mimo_owner = true;
642 mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
644 ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
645 our_bf_sts = cap & mask;
647 if (ap_bf_sts < our_bf_sts) {
652 /* reserve and fill IE */
653 pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
654 ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
657 /* This function determines HE capability flags for the association
660 static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata,
662 struct ieee80211_supported_band *sband)
665 const struct ieee80211_sta_he_cap *he_cap = NULL;
666 struct ieee80211_chanctx_conf *chanctx_conf;
668 bool reg_cap = false;
671 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
672 if (!WARN_ON_ONCE(!chanctx_conf))
673 reg_cap = cfg80211_chandef_usable(sdata->wdev.wiphy,
675 IEEE80211_CHAN_NO_HE);
679 he_cap = ieee80211_get_he_sta_cap(sband);
680 if (!he_cap || !reg_cap)
684 * TODO: the 1 added is because this temporarily is under the EXTENSION
685 * IE. Get rid of it when it moves.
688 2 + 1 + sizeof(he_cap->he_cap_elem) +
689 ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) +
690 ieee80211_he_ppe_size(he_cap->ppe_thres[0],
691 he_cap->he_cap_elem.phy_cap_info);
692 pos = skb_put(skb, he_cap_size);
693 ieee80211_ie_build_he_cap(pos, he_cap, pos + he_cap_size);
695 ieee80211_ie_build_he_6ghz_cap(sdata, skb);
698 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
700 struct ieee80211_local *local = sdata->local;
701 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
702 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
704 struct ieee80211_mgmt *mgmt;
705 u8 *pos, qos_info, *ie_start;
706 size_t offset = 0, noffset;
707 int i, count, rates_len, supp_rates_len, shift;
709 struct ieee80211_supported_band *sband;
710 struct ieee80211_chanctx_conf *chanctx_conf;
711 struct ieee80211_channel *chan;
714 struct element *ext_capa = NULL;
716 /* we know it's writable, cast away the const */
717 if (assoc_data->ie_len)
718 ext_capa = (void *)cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY,
722 sdata_assert_lock(sdata);
725 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
726 if (WARN_ON(!chanctx_conf)) {
730 chan = chanctx_conf->def.chan;
732 sband = local->hw.wiphy->bands[chan->band];
733 shift = ieee80211_vif_get_shift(&sdata->vif);
735 if (assoc_data->supp_rates_len) {
737 * Get all rates supported by the device and the AP as
738 * some APs don't like getting a superset of their rates
739 * in the association request (e.g. D-Link DAP 1353 in
742 rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband,
743 assoc_data->supp_rates,
744 assoc_data->supp_rates_len,
748 * In case AP not provide any supported rates information
749 * before association, we send information element(s) with
750 * all rates that we support.
753 for (i = 0; i < sband->n_bitrates; i++) {
759 skb = alloc_skb(local->hw.extra_tx_headroom +
760 sizeof(*mgmt) + /* bit too much but doesn't matter */
761 2 + assoc_data->ssid_len + /* SSID */
762 4 + rates_len + /* (extended) rates */
763 4 + /* power capability */
764 2 + 2 * sband->n_channels + /* supported channels */
765 2 + sizeof(struct ieee80211_ht_cap) + /* HT */
766 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */
767 2 + 1 + sizeof(struct ieee80211_he_cap_elem) + /* HE */
768 sizeof(struct ieee80211_he_mcs_nss_supp) +
769 IEEE80211_HE_PPE_THRES_MAX_LEN +
770 2 + 1 + sizeof(struct ieee80211_he_6ghz_capa) +
771 assoc_data->ie_len + /* extra IEs */
772 (assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) +
778 skb_reserve(skb, local->hw.extra_tx_headroom);
780 capab = WLAN_CAPABILITY_ESS;
782 if (sband->band == NL80211_BAND_2GHZ) {
783 capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
784 capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
787 if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY)
788 capab |= WLAN_CAPABILITY_PRIVACY;
790 if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
791 ieee80211_hw_check(&local->hw, SPECTRUM_MGMT))
792 capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
794 if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
795 capab |= WLAN_CAPABILITY_RADIO_MEASURE;
797 mgmt = skb_put_zero(skb, 24);
798 memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN);
799 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
800 memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
802 listen_int = cpu_to_le16(sband->band == NL80211_BAND_S1GHZ ?
803 ieee80211_encode_usf(local->hw.conf.listen_interval) :
804 local->hw.conf.listen_interval);
805 if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
807 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
808 IEEE80211_STYPE_REASSOC_REQ);
809 mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
810 mgmt->u.reassoc_req.listen_interval = listen_int;
811 memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
815 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
816 IEEE80211_STYPE_ASSOC_REQ);
817 mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
818 mgmt->u.assoc_req.listen_interval = listen_int;
822 pos = skb_put(skb, 2 + assoc_data->ssid_len);
824 *pos++ = WLAN_EID_SSID;
825 *pos++ = assoc_data->ssid_len;
826 memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
828 if (sband->band == NL80211_BAND_S1GHZ)
831 /* add all rates which were marked to be used above */
832 supp_rates_len = rates_len;
833 if (supp_rates_len > 8)
836 pos = skb_put(skb, supp_rates_len + 2);
837 *pos++ = WLAN_EID_SUPP_RATES;
838 *pos++ = supp_rates_len;
841 for (i = 0; i < sband->n_bitrates; i++) {
842 if (BIT(i) & rates) {
843 int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
851 if (rates_len > count) {
852 pos = skb_put(skb, rates_len - count + 2);
853 *pos++ = WLAN_EID_EXT_SUPP_RATES;
854 *pos++ = rates_len - count;
856 for (i++; i < sband->n_bitrates; i++) {
857 if (BIT(i) & rates) {
859 rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
867 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
868 capab & WLAN_CAPABILITY_RADIO_MEASURE) {
869 pos = skb_put(skb, 4);
870 *pos++ = WLAN_EID_PWR_CAPABILITY;
872 *pos++ = 0; /* min tx power */
874 *pos++ = ieee80211_chandef_max_power(&chanctx_conf->def);
878 * Per spec, we shouldn't include the list of channels if we advertise
879 * support for extended channel switching, but we've always done that;
880 * (for now?) apply this restriction only on the (new) 6 GHz band.
882 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT &&
883 (sband->band != NL80211_BAND_6GHZ ||
884 !ext_capa || ext_capa->datalen < 1 ||
885 !(ext_capa->data[0] & WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING))) {
886 /* TODO: get this in reg domain format */
887 pos = skb_put(skb, 2 * sband->n_channels + 2);
888 *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
889 *pos++ = 2 * sband->n_channels;
890 for (i = 0; i < sband->n_channels; i++) {
891 *pos++ = ieee80211_frequency_to_channel(
892 sband->channels[i].center_freq);
893 *pos++ = 1; /* one channel in the subband*/
897 /* Set MBSSID support for HE AP if needed */
898 if (ieee80211_hw_check(&local->hw, SUPPORTS_ONLY_HE_MULTI_BSSID) &&
899 !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && assoc_data->ie_len &&
900 ext_capa && ext_capa->datalen >= 3)
901 ext_capa->data[2] |= WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT;
903 /* if present, add any custom IEs that go before HT */
904 if (assoc_data->ie_len) {
905 static const u8 before_ht[] = {
908 WLAN_EID_EXT_SUPP_RATES,
909 WLAN_EID_PWR_CAPABILITY,
910 WLAN_EID_SUPPORTED_CHANNELS,
913 WLAN_EID_RRM_ENABLED_CAPABILITIES,
914 WLAN_EID_MOBILITY_DOMAIN,
915 WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */
916 WLAN_EID_RIC_DATA, /* reassoc only */
917 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
919 static const u8 after_ric[] = {
920 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
921 WLAN_EID_HT_CAPABILITY,
922 WLAN_EID_BSS_COEX_2040,
923 /* luckily this is almost always there */
924 WLAN_EID_EXT_CAPABILITY,
925 WLAN_EID_QOS_TRAFFIC_CAPA,
926 WLAN_EID_TIM_BCAST_REQ,
927 WLAN_EID_INTERWORKING,
928 /* 60 GHz (Multi-band, DMG, MMS) can't happen */
929 WLAN_EID_VHT_CAPABILITY,
930 WLAN_EID_OPMODE_NOTIF,
933 noffset = ieee80211_ie_split_ric(assoc_data->ie,
936 ARRAY_SIZE(before_ht),
938 ARRAY_SIZE(after_ric),
940 skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
944 if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
945 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)))
946 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
948 if (sband->band != NL80211_BAND_6GHZ &&
949 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
950 ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param,
951 sband, chan, sdata->smps_mode);
953 /* if present, add any custom IEs that go before VHT */
954 if (assoc_data->ie_len) {
955 static const u8 before_vht[] = {
957 * no need to list the ones split off before HT
960 WLAN_EID_BSS_COEX_2040,
961 WLAN_EID_EXT_CAPABILITY,
962 WLAN_EID_QOS_TRAFFIC_CAPA,
963 WLAN_EID_TIM_BCAST_REQ,
964 WLAN_EID_INTERWORKING,
965 /* 60 GHz (Multi-band, DMG, MMS) can't happen */
968 /* RIC already taken above, so no need to handle here anymore */
969 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
970 before_vht, ARRAY_SIZE(before_vht),
972 skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
976 /* if present, add any custom IEs that go before HE */
977 if (assoc_data->ie_len) {
978 static const u8 before_he[] = {
980 * no need to list the ones split off before VHT
983 WLAN_EID_OPMODE_NOTIF,
984 WLAN_EID_EXTENSION, WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE,
986 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_SESSION,
987 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_PUBLIC_KEY,
988 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_KEY_CONFIRM,
989 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_HLP_CONTAINER,
990 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN,
991 /* TODO: add 11ah/11aj/11ak elements */
994 /* RIC already taken above, so no need to handle here anymore */
995 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
996 before_he, ARRAY_SIZE(before_he),
998 pos = skb_put(skb, noffset - offset);
999 memcpy(pos, assoc_data->ie + offset, noffset - offset);
1003 if (sband->band != NL80211_BAND_6GHZ &&
1004 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
1005 ieee80211_add_vht_ie(sdata, skb, sband,
1006 &assoc_data->ap_vht_cap);
1009 * If AP doesn't support HT, mark HE as disabled.
1010 * If on the 5GHz band, make sure it supports VHT.
1012 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT ||
1013 (sband->band == NL80211_BAND_5GHZ &&
1014 ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
1015 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
1017 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
1018 ieee80211_add_he_ie(sdata, skb, sband);
1020 /* if present, add any custom non-vendor IEs that go after HE */
1021 if (assoc_data->ie_len) {
1022 noffset = ieee80211_ie_split_vendor(assoc_data->ie,
1025 skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
1029 if (assoc_data->wmm) {
1030 if (assoc_data->uapsd) {
1031 qos_info = ifmgd->uapsd_queues;
1032 qos_info |= (ifmgd->uapsd_max_sp_len <<
1033 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
1038 pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
1041 if (sband->band == NL80211_BAND_S1GHZ) {
1042 ieee80211_add_aid_request_ie(sdata, skb);
1043 ieee80211_add_s1g_capab_ie(sdata, &sband->s1g_cap, skb);
1046 /* add any remaining custom (i.e. vendor specific here) IEs */
1047 if (assoc_data->ie_len) {
1048 noffset = assoc_data->ie_len;
1049 skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
1052 if (assoc_data->fils_kek_len &&
1053 fils_encrypt_assoc_req(skb, assoc_data) < 0) {
1058 pos = skb_tail_pointer(skb);
1059 kfree(ifmgd->assoc_req_ies);
1060 ifmgd->assoc_req_ies = kmemdup(ie_start, pos - ie_start, GFP_ATOMIC);
1061 ifmgd->assoc_req_ies_len = pos - ie_start;
1063 drv_mgd_prepare_tx(local, sdata, 0);
1065 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1066 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1067 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
1068 IEEE80211_TX_INTFL_MLME_CONN_TX;
1069 ieee80211_tx_skb(sdata, skb);
1072 void ieee80211_send_pspoll(struct ieee80211_local *local,
1073 struct ieee80211_sub_if_data *sdata)
1075 struct ieee80211_pspoll *pspoll;
1076 struct sk_buff *skb;
1078 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
1082 pspoll = (struct ieee80211_pspoll *) skb->data;
1083 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1085 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1086 ieee80211_tx_skb(sdata, skb);
1089 void ieee80211_send_nullfunc(struct ieee80211_local *local,
1090 struct ieee80211_sub_if_data *sdata,
1093 struct sk_buff *skb;
1094 struct ieee80211_hdr_3addr *nullfunc;
1095 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1097 /* Don't send NDPs when STA is connected HE */
1098 if (sdata->vif.type == NL80211_IFTYPE_STATION &&
1099 !(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
1102 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif,
1103 !ieee80211_hw_check(&local->hw, DOESNT_SUPPORT_QOS_NDP));
1107 nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
1109 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1111 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
1112 IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
1114 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1115 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
1117 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
1118 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
1120 ieee80211_tx_skb(sdata, skb);
1123 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
1124 struct ieee80211_sub_if_data *sdata)
1126 struct sk_buff *skb;
1127 struct ieee80211_hdr *nullfunc;
1130 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
1133 /* Don't send NDPs when connected HE */
1134 if (!(sdata->u.mgd.flags & IEEE80211_STA_DISABLE_HE))
1137 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
1141 skb_reserve(skb, local->hw.extra_tx_headroom);
1143 nullfunc = skb_put_zero(skb, 30);
1144 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
1145 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
1146 nullfunc->frame_control = fc;
1147 memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
1148 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
1149 memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
1150 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
1152 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1153 ieee80211_tx_skb(sdata, skb);
1156 /* spectrum management related things */
1157 static void ieee80211_chswitch_work(struct work_struct *work)
1159 struct ieee80211_sub_if_data *sdata =
1160 container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
1161 struct ieee80211_local *local = sdata->local;
1162 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1165 if (!ieee80211_sdata_running(sdata))
1169 mutex_lock(&local->mtx);
1170 mutex_lock(&local->chanctx_mtx);
1172 if (!ifmgd->associated)
1175 if (!sdata->vif.csa_active)
1179 * using reservation isn't immediate as it may be deferred until later
1180 * with multi-vif. once reservation is complete it will re-schedule the
1181 * work with no reserved_chanctx so verify chandef to check if it
1182 * completed successfully
1185 if (sdata->reserved_chanctx) {
1186 struct ieee80211_supported_band *sband = NULL;
1187 struct sta_info *mgd_sta = NULL;
1188 enum ieee80211_sta_rx_bandwidth bw = IEEE80211_STA_RX_BW_20;
1191 * with multi-vif csa driver may call ieee80211_csa_finish()
1192 * many times while waiting for other interfaces to use their
1195 if (sdata->reserved_ready)
1198 if (sdata->vif.bss_conf.chandef.width !=
1199 sdata->csa_chandef.width) {
1201 * For managed interface, we need to also update the AP
1202 * station bandwidth and align the rate scale algorithm
1203 * on the bandwidth change. Here we only consider the
1204 * bandwidth of the new channel definition (as channel
1205 * switch flow does not have the full HT/VHT/HE
1206 * information), assuming that if additional changes are
1207 * required they would be done as part of the processing
1208 * of the next beacon from the AP.
1210 switch (sdata->csa_chandef.width) {
1211 case NL80211_CHAN_WIDTH_20_NOHT:
1212 case NL80211_CHAN_WIDTH_20:
1214 bw = IEEE80211_STA_RX_BW_20;
1216 case NL80211_CHAN_WIDTH_40:
1217 bw = IEEE80211_STA_RX_BW_40;
1219 case NL80211_CHAN_WIDTH_80:
1220 bw = IEEE80211_STA_RX_BW_80;
1222 case NL80211_CHAN_WIDTH_80P80:
1223 case NL80211_CHAN_WIDTH_160:
1224 bw = IEEE80211_STA_RX_BW_160;
1228 mgd_sta = sta_info_get(sdata, ifmgd->bssid);
1230 local->hw.wiphy->bands[sdata->csa_chandef.chan->band];
1233 if (sdata->vif.bss_conf.chandef.width >
1234 sdata->csa_chandef.width) {
1235 mgd_sta->sta.bandwidth = bw;
1236 rate_control_rate_update(local, sband, mgd_sta,
1237 IEEE80211_RC_BW_CHANGED);
1240 ret = ieee80211_vif_use_reserved_context(sdata);
1243 "failed to use reserved channel context, disconnecting (err=%d)\n",
1245 ieee80211_queue_work(&sdata->local->hw,
1246 &ifmgd->csa_connection_drop_work);
1250 if (sdata->vif.bss_conf.chandef.width <
1251 sdata->csa_chandef.width) {
1252 mgd_sta->sta.bandwidth = bw;
1253 rate_control_rate_update(local, sband, mgd_sta,
1254 IEEE80211_RC_BW_CHANGED);
1260 if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef,
1261 &sdata->csa_chandef)) {
1263 "failed to finalize channel switch, disconnecting\n");
1264 ieee80211_queue_work(&sdata->local->hw,
1265 &ifmgd->csa_connection_drop_work);
1269 ifmgd->csa_waiting_bcn = true;
1271 ieee80211_sta_reset_beacon_monitor(sdata);
1272 ieee80211_sta_reset_conn_monitor(sdata);
1275 mutex_unlock(&local->chanctx_mtx);
1276 mutex_unlock(&local->mtx);
1277 sdata_unlock(sdata);
1280 static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
1282 struct ieee80211_local *local = sdata->local;
1283 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1286 sdata_assert_lock(sdata);
1288 WARN_ON(!sdata->vif.csa_active);
1290 if (sdata->csa_block_tx) {
1291 ieee80211_wake_vif_queues(local, sdata,
1292 IEEE80211_QUEUE_STOP_REASON_CSA);
1293 sdata->csa_block_tx = false;
1296 sdata->vif.csa_active = false;
1297 ifmgd->csa_waiting_bcn = false;
1299 ret = drv_post_channel_switch(sdata);
1302 "driver post channel switch failed, disconnecting\n");
1303 ieee80211_queue_work(&local->hw,
1304 &ifmgd->csa_connection_drop_work);
1308 cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef);
1311 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
1313 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1314 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1316 trace_api_chswitch_done(sdata, success);
1319 "driver channel switch failed, disconnecting\n");
1320 ieee80211_queue_work(&sdata->local->hw,
1321 &ifmgd->csa_connection_drop_work);
1323 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
1326 EXPORT_SYMBOL(ieee80211_chswitch_done);
1328 static void ieee80211_chswitch_timer(struct timer_list *t)
1330 struct ieee80211_sub_if_data *sdata =
1331 from_timer(sdata, t, u.mgd.chswitch_timer);
1333 ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work);
1337 ieee80211_sta_abort_chanswitch(struct ieee80211_sub_if_data *sdata)
1339 struct ieee80211_local *local = sdata->local;
1341 if (!local->ops->abort_channel_switch)
1344 mutex_lock(&local->mtx);
1346 mutex_lock(&local->chanctx_mtx);
1347 ieee80211_vif_unreserve_chanctx(sdata);
1348 mutex_unlock(&local->chanctx_mtx);
1350 if (sdata->csa_block_tx)
1351 ieee80211_wake_vif_queues(local, sdata,
1352 IEEE80211_QUEUE_STOP_REASON_CSA);
1354 sdata->csa_block_tx = false;
1355 sdata->vif.csa_active = false;
1357 mutex_unlock(&local->mtx);
1359 drv_abort_channel_switch(sdata);
1363 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
1364 u64 timestamp, u32 device_timestamp,
1365 struct ieee802_11_elems *elems,
1368 struct ieee80211_local *local = sdata->local;
1369 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1370 struct cfg80211_bss *cbss = ifmgd->associated;
1371 struct ieee80211_chanctx_conf *conf;
1372 struct ieee80211_chanctx *chanctx;
1373 enum nl80211_band current_band;
1374 struct ieee80211_csa_ie csa_ie;
1375 struct ieee80211_channel_switch ch_switch;
1376 struct ieee80211_bss *bss;
1379 sdata_assert_lock(sdata);
1384 if (local->scanning)
1387 current_band = cbss->channel->band;
1388 bss = (void *)cbss->priv;
1389 res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
1392 ifmgd->associated->bssid, &csa_ie);
1395 ch_switch.timestamp = timestamp;
1396 ch_switch.device_timestamp = device_timestamp;
1397 ch_switch.block_tx = csa_ie.mode;
1398 ch_switch.chandef = csa_ie.chandef;
1399 ch_switch.count = csa_ie.count;
1400 ch_switch.delay = csa_ie.max_switch_time;
1404 ieee80211_queue_work(&local->hw,
1405 &ifmgd->csa_connection_drop_work);
1409 if (beacon && sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) {
1411 ieee80211_sta_abort_chanswitch(sdata);
1413 drv_channel_switch_rx_beacon(sdata, &ch_switch);
1415 } else if (sdata->vif.csa_active || res) {
1416 /* disregard subsequent announcements if already processing */
1420 if (sdata->vif.bss_conf.chandef.chan->band !=
1421 csa_ie.chandef.chan->band) {
1423 "AP %pM switches to different band (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1424 ifmgd->associated->bssid,
1425 csa_ie.chandef.chan->center_freq,
1426 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1427 csa_ie.chandef.center_freq2);
1428 goto lock_and_drop_connection;
1431 if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
1432 IEEE80211_CHAN_DISABLED)) {
1434 "AP %pM switches to unsupported channel "
1435 "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), "
1437 ifmgd->associated->bssid,
1438 csa_ie.chandef.chan->center_freq,
1439 csa_ie.chandef.chan->freq_offset,
1440 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1441 csa_ie.chandef.freq1_offset,
1442 csa_ie.chandef.center_freq2);
1443 goto lock_and_drop_connection;
1446 if (cfg80211_chandef_identical(&csa_ie.chandef,
1447 &sdata->vif.bss_conf.chandef) &&
1448 (!csa_ie.mode || !beacon)) {
1449 if (ifmgd->csa_ignored_same_chan)
1452 "AP %pM tries to chanswitch to same channel, ignore\n",
1453 ifmgd->associated->bssid);
1454 ifmgd->csa_ignored_same_chan = true;
1459 * Drop all TDLS peers - either we disconnect or move to a different
1460 * channel from this point on. There's no telling what our peer will do.
1461 * The TDLS WIDER_BW scenario is also problematic, as peers might now
1462 * have an incompatible wider chandef.
1464 ieee80211_teardown_tdls_peers(sdata);
1466 mutex_lock(&local->mtx);
1467 mutex_lock(&local->chanctx_mtx);
1468 conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
1469 lockdep_is_held(&local->chanctx_mtx));
1472 "no channel context assigned to vif?, disconnecting\n");
1473 goto drop_connection;
1476 chanctx = container_of(conf, struct ieee80211_chanctx, conf);
1478 if (local->use_chanctx &&
1479 !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) {
1481 "driver doesn't support chan-switch with channel contexts\n");
1482 goto drop_connection;
1485 if (drv_pre_channel_switch(sdata, &ch_switch)) {
1487 "preparing for channel switch failed, disconnecting\n");
1488 goto drop_connection;
1491 res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef,
1492 chanctx->mode, false);
1495 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1497 goto drop_connection;
1499 mutex_unlock(&local->chanctx_mtx);
1501 sdata->vif.csa_active = true;
1502 sdata->csa_chandef = csa_ie.chandef;
1503 sdata->csa_block_tx = csa_ie.mode;
1504 ifmgd->csa_ignored_same_chan = false;
1505 ifmgd->beacon_crc_valid = false;
1507 if (sdata->csa_block_tx)
1508 ieee80211_stop_vif_queues(local, sdata,
1509 IEEE80211_QUEUE_STOP_REASON_CSA);
1510 mutex_unlock(&local->mtx);
1512 cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef,
1513 csa_ie.count, csa_ie.mode);
1515 if (local->ops->channel_switch) {
1516 /* use driver's channel switch callback */
1517 drv_channel_switch(local, sdata, &ch_switch);
1521 /* channel switch handled in software */
1522 if (csa_ie.count <= 1)
1523 ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
1525 mod_timer(&ifmgd->chswitch_timer,
1526 TU_TO_EXP_TIME((csa_ie.count - 1) *
1527 cbss->beacon_interval));
1529 lock_and_drop_connection:
1530 mutex_lock(&local->mtx);
1531 mutex_lock(&local->chanctx_mtx);
1534 * This is just so that the disconnect flow will know that
1535 * we were trying to switch channel and failed. In case the
1536 * mode is 1 (we are not allowed to Tx), we will know not to
1537 * send a deauthentication frame. Those two fields will be
1538 * reset when the disconnection worker runs.
1540 sdata->vif.csa_active = true;
1541 sdata->csa_block_tx = csa_ie.mode;
1543 ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
1544 mutex_unlock(&local->chanctx_mtx);
1545 mutex_unlock(&local->mtx);
1549 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
1550 struct ieee80211_channel *channel,
1551 const u8 *country_ie, u8 country_ie_len,
1552 const u8 *pwr_constr_elem,
1553 int *chan_pwr, int *pwr_reduction)
1555 struct ieee80211_country_ie_triplet *triplet;
1556 int chan = ieee80211_frequency_to_channel(channel->center_freq);
1557 int i, chan_increment;
1558 bool have_chan_pwr = false;
1561 if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
1564 triplet = (void *)(country_ie + 3);
1565 country_ie_len -= 3;
1567 switch (channel->band) {
1571 case NL80211_BAND_2GHZ:
1572 case NL80211_BAND_60GHZ:
1575 case NL80211_BAND_5GHZ:
1578 case NL80211_BAND_6GHZ:
1580 * In the 6 GHz band, the "maximum transmit power level"
1581 * field in the triplets is reserved, and thus will be
1582 * zero and we shouldn't use it to control TX power.
1583 * The actual TX power will be given in the transmit
1584 * power envelope element instead.
1590 while (country_ie_len >= 3) {
1591 u8 first_channel = triplet->chans.first_channel;
1593 if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
1596 for (i = 0; i < triplet->chans.num_channels; i++) {
1597 if (first_channel + i * chan_increment == chan) {
1598 have_chan_pwr = true;
1599 *chan_pwr = triplet->chans.max_power;
1608 country_ie_len -= 3;
1611 if (have_chan_pwr && pwr_constr_elem)
1612 *pwr_reduction = *pwr_constr_elem;
1616 return have_chan_pwr;
1619 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
1620 struct ieee80211_channel *channel,
1621 const u8 *cisco_dtpc_ie,
1624 /* From practical testing, the first data byte of the DTPC element
1625 * seems to contain the requested dBm level, and the CLI on Cisco
1626 * APs clearly state the range is -127 to 127 dBm, which indicates
1627 * a signed byte, although it seemingly never actually goes negative.
1628 * The other byte seems to always be zero.
1630 *pwr_level = (__s8)cisco_dtpc_ie[4];
1633 static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
1634 struct ieee80211_channel *channel,
1635 struct ieee80211_mgmt *mgmt,
1636 const u8 *country_ie, u8 country_ie_len,
1637 const u8 *pwr_constr_ie,
1638 const u8 *cisco_dtpc_ie)
1640 bool has_80211h_pwr = false, has_cisco_pwr = false;
1641 int chan_pwr = 0, pwr_reduction_80211h = 0;
1642 int pwr_level_cisco, pwr_level_80211h;
1644 __le16 capab = mgmt->u.probe_resp.capab_info;
1646 if (ieee80211_is_s1g_beacon(mgmt->frame_control))
1647 return 0; /* TODO */
1650 (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
1651 capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
1652 has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
1653 sdata, channel, country_ie, country_ie_len,
1654 pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
1656 max_t(int, 0, chan_pwr - pwr_reduction_80211h);
1659 if (cisco_dtpc_ie) {
1660 ieee80211_find_cisco_dtpc(
1661 sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
1662 has_cisco_pwr = true;
1665 if (!has_80211h_pwr && !has_cisco_pwr)
1668 /* If we have both 802.11h and Cisco DTPC, apply both limits
1669 * by picking the smallest of the two power levels advertised.
1671 if (has_80211h_pwr &&
1672 (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
1673 new_ap_level = pwr_level_80211h;
1675 if (sdata->ap_power_level == new_ap_level)
1679 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1680 pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
1681 sdata->u.mgd.bssid);
1682 } else { /* has_cisco_pwr is always true here. */
1683 new_ap_level = pwr_level_cisco;
1685 if (sdata->ap_power_level == new_ap_level)
1689 "Limiting TX power to %d dBm as advertised by %pM\n",
1690 pwr_level_cisco, sdata->u.mgd.bssid);
1693 sdata->ap_power_level = new_ap_level;
1694 if (__ieee80211_recalc_txpower(sdata))
1695 return BSS_CHANGED_TXPOWER;
1700 static void ieee80211_enable_ps(struct ieee80211_local *local,
1701 struct ieee80211_sub_if_data *sdata)
1703 struct ieee80211_conf *conf = &local->hw.conf;
1706 * If we are scanning right now then the parameters will
1707 * take effect when scan finishes.
1709 if (local->scanning)
1712 if (conf->dynamic_ps_timeout > 0 &&
1713 !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
1714 mod_timer(&local->dynamic_ps_timer, jiffies +
1715 msecs_to_jiffies(conf->dynamic_ps_timeout));
1717 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
1718 ieee80211_send_nullfunc(local, sdata, true);
1720 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1721 ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1724 conf->flags |= IEEE80211_CONF_PS;
1725 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1729 static void ieee80211_change_ps(struct ieee80211_local *local)
1731 struct ieee80211_conf *conf = &local->hw.conf;
1733 if (local->ps_sdata) {
1734 ieee80211_enable_ps(local, local->ps_sdata);
1735 } else if (conf->flags & IEEE80211_CONF_PS) {
1736 conf->flags &= ~IEEE80211_CONF_PS;
1737 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1738 del_timer_sync(&local->dynamic_ps_timer);
1739 cancel_work_sync(&local->dynamic_ps_enable_work);
1743 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
1745 struct ieee80211_if_managed *mgd = &sdata->u.mgd;
1746 struct sta_info *sta = NULL;
1747 bool authorized = false;
1749 if (!mgd->powersave)
1755 if (!mgd->associated)
1758 if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
1761 if (!mgd->have_beacon)
1765 sta = sta_info_get(sdata, mgd->bssid);
1767 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
1773 /* need to hold RTNL or interface lock */
1774 void ieee80211_recalc_ps(struct ieee80211_local *local)
1776 struct ieee80211_sub_if_data *sdata, *found = NULL;
1780 if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) {
1781 local->ps_sdata = NULL;
1785 list_for_each_entry(sdata, &local->interfaces, list) {
1786 if (!ieee80211_sdata_running(sdata))
1788 if (sdata->vif.type == NL80211_IFTYPE_AP) {
1789 /* If an AP vif is found, then disable PS
1790 * by setting the count to zero thereby setting
1796 if (sdata->vif.type != NL80211_IFTYPE_STATION)
1802 if (count == 1 && ieee80211_powersave_allowed(found)) {
1803 u8 dtimper = found->u.mgd.dtim_period;
1805 timeout = local->dynamic_ps_forced_timeout;
1808 local->hw.conf.dynamic_ps_timeout = timeout;
1810 /* If the TIM IE is invalid, pretend the value is 1 */
1814 local->hw.conf.ps_dtim_period = dtimper;
1815 local->ps_sdata = found;
1817 local->ps_sdata = NULL;
1820 ieee80211_change_ps(local);
1823 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
1825 bool ps_allowed = ieee80211_powersave_allowed(sdata);
1827 if (sdata->vif.bss_conf.ps != ps_allowed) {
1828 sdata->vif.bss_conf.ps = ps_allowed;
1829 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS);
1833 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
1835 struct ieee80211_local *local =
1836 container_of(work, struct ieee80211_local,
1837 dynamic_ps_disable_work);
1839 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1840 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1841 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1844 ieee80211_wake_queues_by_reason(&local->hw,
1845 IEEE80211_MAX_QUEUE_MAP,
1846 IEEE80211_QUEUE_STOP_REASON_PS,
1850 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
1852 struct ieee80211_local *local =
1853 container_of(work, struct ieee80211_local,
1854 dynamic_ps_enable_work);
1855 struct ieee80211_sub_if_data *sdata = local->ps_sdata;
1856 struct ieee80211_if_managed *ifmgd;
1857 unsigned long flags;
1860 /* can only happen when PS was just disabled anyway */
1864 ifmgd = &sdata->u.mgd;
1866 if (local->hw.conf.flags & IEEE80211_CONF_PS)
1869 if (local->hw.conf.dynamic_ps_timeout > 0) {
1870 /* don't enter PS if TX frames are pending */
1871 if (drv_tx_frames_pending(local)) {
1872 mod_timer(&local->dynamic_ps_timer, jiffies +
1874 local->hw.conf.dynamic_ps_timeout));
1879 * transmission can be stopped by others which leads to
1880 * dynamic_ps_timer expiry. Postpone the ps timer if it
1881 * is not the actual idle state.
1883 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
1884 for (q = 0; q < local->hw.queues; q++) {
1885 if (local->queue_stop_reasons[q]) {
1886 spin_unlock_irqrestore(&local->queue_stop_reason_lock,
1888 mod_timer(&local->dynamic_ps_timer, jiffies +
1890 local->hw.conf.dynamic_ps_timeout));
1894 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
1897 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1898 !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1899 if (drv_tx_frames_pending(local)) {
1900 mod_timer(&local->dynamic_ps_timer, jiffies +
1902 local->hw.conf.dynamic_ps_timeout));
1904 ieee80211_send_nullfunc(local, sdata, true);
1905 /* Flush to get the tx status of nullfunc frame */
1906 ieee80211_flush_queues(local, sdata, false);
1910 if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
1911 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) ||
1912 (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1913 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
1914 local->hw.conf.flags |= IEEE80211_CONF_PS;
1915 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1919 void ieee80211_dynamic_ps_timer(struct timer_list *t)
1921 struct ieee80211_local *local = from_timer(local, t, dynamic_ps_timer);
1923 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
1926 void ieee80211_dfs_cac_timer_work(struct work_struct *work)
1928 struct delayed_work *delayed_work = to_delayed_work(work);
1929 struct ieee80211_sub_if_data *sdata =
1930 container_of(delayed_work, struct ieee80211_sub_if_data,
1931 dfs_cac_timer_work);
1932 struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
1934 mutex_lock(&sdata->local->mtx);
1935 if (sdata->wdev.cac_started) {
1936 ieee80211_vif_release_channel(sdata);
1937 cfg80211_cac_event(sdata->dev, &chandef,
1938 NL80211_RADAR_CAC_FINISHED,
1941 mutex_unlock(&sdata->local->mtx);
1945 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1947 struct ieee80211_local *local = sdata->local;
1948 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1952 if (local->hw.queues < IEEE80211_NUM_ACS)
1955 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1956 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
1958 unsigned long now = jiffies;
1960 if (tx_tspec->action == TX_TSPEC_ACTION_NONE &&
1961 tx_tspec->admitted_time &&
1962 time_after(now, tx_tspec->time_slice_start + HZ)) {
1963 tx_tspec->consumed_tx_time = 0;
1964 tx_tspec->time_slice_start = now;
1966 if (tx_tspec->downgraded)
1968 TX_TSPEC_ACTION_STOP_DOWNGRADE;
1971 switch (tx_tspec->action) {
1972 case TX_TSPEC_ACTION_STOP_DOWNGRADE:
1973 /* take the original parameters */
1974 if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac]))
1976 "failed to set TX queue parameters for queue %d\n",
1978 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1979 tx_tspec->downgraded = false;
1982 case TX_TSPEC_ACTION_DOWNGRADE:
1983 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
1984 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1988 /* downgrade next lower non-ACM AC */
1989 for (non_acm_ac = ac + 1;
1990 non_acm_ac < IEEE80211_NUM_ACS;
1992 if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac)))
1994 /* Usually the loop will result in using BK even if it
1995 * requires admission control, but such a configuration
1996 * makes no sense and we have to transmit somehow - the
1997 * AC selection does the same thing.
1998 * If we started out trying to downgrade from BK, then
1999 * the extra condition here might be needed.
2001 if (non_acm_ac >= IEEE80211_NUM_ACS)
2002 non_acm_ac = IEEE80211_AC_BK;
2003 if (drv_conf_tx(local, sdata, ac,
2004 &sdata->tx_conf[non_acm_ac]))
2006 "failed to set TX queue parameters for queue %d\n",
2008 tx_tspec->action = TX_TSPEC_ACTION_NONE;
2010 schedule_delayed_work(&ifmgd->tx_tspec_wk,
2011 tx_tspec->time_slice_start + HZ - now + 1);
2013 case TX_TSPEC_ACTION_NONE:
2022 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
2024 if (__ieee80211_sta_handle_tspec_ac_params(sdata))
2025 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS);
2028 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work)
2030 struct ieee80211_sub_if_data *sdata;
2032 sdata = container_of(work, struct ieee80211_sub_if_data,
2033 u.mgd.tx_tspec_wk.work);
2034 ieee80211_sta_handle_tspec_ac_params(sdata);
2039 ieee80211_sta_wmm_params(struct ieee80211_local *local,
2040 struct ieee80211_sub_if_data *sdata,
2041 const u8 *wmm_param, size_t wmm_param_len,
2042 const struct ieee80211_mu_edca_param_set *mu_edca)
2044 struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS];
2045 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2047 int count, mu_edca_count, ac;
2049 u8 uapsd_queues = 0;
2051 if (!local->ops->conf_tx)
2054 if (local->hw.queues < IEEE80211_NUM_ACS)
2060 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
2063 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
2064 uapsd_queues = ifmgd->uapsd_queues;
2066 count = wmm_param[6] & 0x0f;
2067 /* -1 is the initial value of ifmgd->mu_edca_last_param_set.
2068 * if mu_edca was preset before and now it disappeared tell
2069 * the driver about it.
2071 mu_edca_count = mu_edca ? mu_edca->mu_qos_info & 0x0f : -1;
2072 if (count == ifmgd->wmm_last_param_set &&
2073 mu_edca_count == ifmgd->mu_edca_last_param_set)
2075 ifmgd->wmm_last_param_set = count;
2076 ifmgd->mu_edca_last_param_set = mu_edca_count;
2078 pos = wmm_param + 8;
2079 left = wmm_param_len - 8;
2081 memset(¶ms, 0, sizeof(params));
2084 for (; left >= 4; left -= 4, pos += 4) {
2085 int aci = (pos[0] >> 5) & 0x03;
2086 int acm = (pos[0] >> 4) & 0x01;
2091 ac = IEEE80211_AC_BK;
2093 sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
2094 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
2096 params[ac].mu_edca = !!mu_edca;
2098 params[ac].mu_edca_param_rec = mu_edca->ac_bk;
2101 ac = IEEE80211_AC_VI;
2103 sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
2104 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
2106 params[ac].mu_edca = !!mu_edca;
2108 params[ac].mu_edca_param_rec = mu_edca->ac_vi;
2111 ac = IEEE80211_AC_VO;
2113 sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
2114 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
2116 params[ac].mu_edca = !!mu_edca;
2118 params[ac].mu_edca_param_rec = mu_edca->ac_vo;
2122 ac = IEEE80211_AC_BE;
2124 sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
2125 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
2127 params[ac].mu_edca = !!mu_edca;
2129 params[ac].mu_edca_param_rec = mu_edca->ac_be;
2133 params[ac].aifs = pos[0] & 0x0f;
2135 if (params[ac].aifs < 2) {
2137 "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n",
2138 params[ac].aifs, aci);
2139 params[ac].aifs = 2;
2141 params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
2142 params[ac].cw_min = ecw2cw(pos[1] & 0x0f);
2143 params[ac].txop = get_unaligned_le16(pos + 2);
2144 params[ac].acm = acm;
2145 params[ac].uapsd = uapsd;
2147 if (params[ac].cw_min == 0 ||
2148 params[ac].cw_min > params[ac].cw_max) {
2150 "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n",
2151 params[ac].cw_min, params[ac].cw_max, aci);
2154 ieee80211_regulatory_limit_wmm_params(sdata, ¶ms[ac], ac);
2157 /* WMM specification requires all 4 ACIs. */
2158 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
2159 if (params[ac].cw_min == 0) {
2161 "AP has invalid WMM params (missing AC %d), using defaults\n",
2167 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
2169 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
2171 params[ac].aifs, params[ac].cw_min, params[ac].cw_max,
2172 params[ac].txop, params[ac].uapsd,
2173 ifmgd->tx_tspec[ac].downgraded);
2174 sdata->tx_conf[ac] = params[ac];
2175 if (!ifmgd->tx_tspec[ac].downgraded &&
2176 drv_conf_tx(local, sdata, ac, ¶ms[ac]))
2178 "failed to set TX queue parameters for AC %d\n",
2182 /* enable WMM or activate new settings */
2183 sdata->vif.bss_conf.qos = true;
2187 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
2189 lockdep_assert_held(&sdata->local->mtx);
2191 sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
2192 ieee80211_run_deferred_scan(sdata->local);
2195 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
2197 mutex_lock(&sdata->local->mtx);
2198 __ieee80211_stop_poll(sdata);
2199 mutex_unlock(&sdata->local->mtx);
2202 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
2203 u16 capab, bool erp_valid, u8 erp)
2205 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2206 struct ieee80211_supported_band *sband;
2208 bool use_protection;
2209 bool use_short_preamble;
2210 bool use_short_slot;
2212 sband = ieee80211_get_sband(sdata);
2217 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
2218 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
2220 use_protection = false;
2221 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
2224 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
2225 if (sband->band == NL80211_BAND_5GHZ ||
2226 sband->band == NL80211_BAND_6GHZ)
2227 use_short_slot = true;
2229 if (use_protection != bss_conf->use_cts_prot) {
2230 bss_conf->use_cts_prot = use_protection;
2231 changed |= BSS_CHANGED_ERP_CTS_PROT;
2234 if (use_short_preamble != bss_conf->use_short_preamble) {
2235 bss_conf->use_short_preamble = use_short_preamble;
2236 changed |= BSS_CHANGED_ERP_PREAMBLE;
2239 if (use_short_slot != bss_conf->use_short_slot) {
2240 bss_conf->use_short_slot = use_short_slot;
2241 changed |= BSS_CHANGED_ERP_SLOT;
2247 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
2248 struct cfg80211_bss *cbss,
2249 u32 bss_info_changed)
2251 struct ieee80211_bss *bss = (void *)cbss->priv;
2252 struct ieee80211_local *local = sdata->local;
2253 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2255 bss_info_changed |= BSS_CHANGED_ASSOC;
2256 bss_info_changed |= ieee80211_handle_bss_capability(sdata,
2257 bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
2259 sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
2260 beacon_loss_count * bss_conf->beacon_int));
2262 sdata->u.mgd.associated = cbss;
2263 memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
2265 ieee80211_check_rate_mask(sdata);
2267 sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
2269 if (sdata->vif.p2p ||
2270 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
2271 const struct cfg80211_bss_ies *ies;
2274 ies = rcu_dereference(cbss->ies);
2278 ret = cfg80211_get_p2p_attr(
2279 ies->data, ies->len,
2280 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
2281 (u8 *) &bss_conf->p2p_noa_attr,
2282 sizeof(bss_conf->p2p_noa_attr));
2284 sdata->u.mgd.p2p_noa_index =
2285 bss_conf->p2p_noa_attr.index;
2286 bss_info_changed |= BSS_CHANGED_P2P_PS;
2292 /* just to be sure */
2293 ieee80211_stop_poll(sdata);
2295 ieee80211_led_assoc(local, 1);
2297 if (sdata->u.mgd.have_beacon) {
2299 * If the AP is buggy we may get here with no DTIM period
2300 * known, so assume it's 1 which is the only safe assumption
2301 * in that case, although if the TIM IE is broken powersave
2302 * probably just won't work at all.
2304 bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
2305 bss_conf->beacon_rate = bss->beacon_rate;
2306 bss_info_changed |= BSS_CHANGED_BEACON_INFO;
2308 bss_conf->beacon_rate = NULL;
2309 bss_conf->dtim_period = 0;
2312 bss_conf->assoc = 1;
2314 /* Tell the driver to monitor connection quality (if supported) */
2315 if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
2316 bss_conf->cqm_rssi_thold)
2317 bss_info_changed |= BSS_CHANGED_CQM;
2319 /* Enable ARP filtering */
2320 if (bss_conf->arp_addr_cnt)
2321 bss_info_changed |= BSS_CHANGED_ARP_FILTER;
2323 ieee80211_bss_info_change_notify(sdata, bss_info_changed);
2325 mutex_lock(&local->iflist_mtx);
2326 ieee80211_recalc_ps(local);
2327 mutex_unlock(&local->iflist_mtx);
2329 ieee80211_recalc_smps(sdata);
2330 ieee80211_recalc_ps_vif(sdata);
2332 netif_carrier_on(sdata->dev);
2335 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
2336 u16 stype, u16 reason, bool tx,
2339 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2340 struct ieee80211_local *local = sdata->local;
2343 sdata_assert_lock(sdata);
2345 if (WARN_ON_ONCE(tx && !frame_buf))
2348 if (WARN_ON(!ifmgd->associated))
2351 ieee80211_stop_poll(sdata);
2353 ifmgd->associated = NULL;
2354 netif_carrier_off(sdata->dev);
2357 * if we want to get out of ps before disassoc (why?) we have
2358 * to do it before sending disassoc, as otherwise the null-packet
2361 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
2362 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
2363 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2365 local->ps_sdata = NULL;
2367 /* disable per-vif ps */
2368 ieee80211_recalc_ps_vif(sdata);
2370 /* make sure ongoing transmission finishes */
2374 * drop any frame before deauth/disassoc, this can be data or
2375 * management frame. Since we are disconnecting, we should not
2376 * insist sending these frames which can take time and delay
2377 * the disconnection and possible the roaming.
2380 ieee80211_flush_queues(local, sdata, true);
2382 /* deauthenticate/disassociate now */
2383 if (tx || frame_buf) {
2385 * In multi channel scenarios guarantee that the virtual
2386 * interface is granted immediate airtime to transmit the
2387 * deauthentication frame by calling mgd_prepare_tx, if the
2388 * driver requested so.
2390 if (ieee80211_hw_check(&local->hw, DEAUTH_NEED_MGD_TX_PREP) &&
2391 !ifmgd->have_beacon)
2392 drv_mgd_prepare_tx(sdata->local, sdata, 0);
2394 ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid,
2395 ifmgd->bssid, stype, reason,
2399 /* flush out frame - make sure the deauth was actually sent */
2401 ieee80211_flush_queues(local, sdata, false);
2403 /* clear bssid only after building the needed mgmt frames */
2404 eth_zero_addr(ifmgd->bssid);
2406 sdata->vif.bss_conf.ssid_len = 0;
2408 /* remove AP and TDLS peers */
2409 sta_info_flush(sdata);
2411 /* finally reset all BSS / config parameters */
2412 changed |= ieee80211_reset_erp_info(sdata);
2414 ieee80211_led_assoc(local, 0);
2415 changed |= BSS_CHANGED_ASSOC;
2416 sdata->vif.bss_conf.assoc = false;
2418 ifmgd->p2p_noa_index = -1;
2419 memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
2420 sizeof(sdata->vif.bss_conf.p2p_noa_attr));
2422 /* on the next assoc, re-program HT/VHT parameters */
2423 memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
2424 memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
2425 memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
2426 memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
2428 /* reset MU-MIMO ownership and group data */
2429 memset(sdata->vif.bss_conf.mu_group.membership, 0,
2430 sizeof(sdata->vif.bss_conf.mu_group.membership));
2431 memset(sdata->vif.bss_conf.mu_group.position, 0,
2432 sizeof(sdata->vif.bss_conf.mu_group.position));
2433 changed |= BSS_CHANGED_MU_GROUPS;
2434 sdata->vif.mu_mimo_owner = false;
2436 sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
2438 del_timer_sync(&local->dynamic_ps_timer);
2439 cancel_work_sync(&local->dynamic_ps_enable_work);
2441 /* Disable ARP filtering */
2442 if (sdata->vif.bss_conf.arp_addr_cnt)
2443 changed |= BSS_CHANGED_ARP_FILTER;
2445 sdata->vif.bss_conf.qos = false;
2446 changed |= BSS_CHANGED_QOS;
2448 /* The BSSID (not really interesting) and HT changed */
2449 changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
2450 ieee80211_bss_info_change_notify(sdata, changed);
2452 /* disassociated - set to defaults now */
2453 ieee80211_set_wmm_default(sdata, false, false);
2455 del_timer_sync(&sdata->u.mgd.conn_mon_timer);
2456 del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
2457 del_timer_sync(&sdata->u.mgd.timer);
2458 del_timer_sync(&sdata->u.mgd.chswitch_timer);
2460 sdata->vif.bss_conf.dtim_period = 0;
2461 sdata->vif.bss_conf.beacon_rate = NULL;
2463 ifmgd->have_beacon = false;
2466 mutex_lock(&local->mtx);
2467 ieee80211_vif_release_channel(sdata);
2469 sdata->vif.csa_active = false;
2470 ifmgd->csa_waiting_bcn = false;
2471 ifmgd->csa_ignored_same_chan = false;
2472 if (sdata->csa_block_tx) {
2473 ieee80211_wake_vif_queues(local, sdata,
2474 IEEE80211_QUEUE_STOP_REASON_CSA);
2475 sdata->csa_block_tx = false;
2477 mutex_unlock(&local->mtx);
2479 /* existing TX TSPEC sessions no longer exist */
2480 memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec));
2481 cancel_delayed_work_sync(&ifmgd->tx_tspec_wk);
2483 sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
2486 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
2488 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2489 struct ieee80211_local *local = sdata->local;
2491 mutex_lock(&local->mtx);
2492 if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
2495 __ieee80211_stop_poll(sdata);
2497 mutex_lock(&local->iflist_mtx);
2498 ieee80211_recalc_ps(local);
2499 mutex_unlock(&local->iflist_mtx);
2501 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
2505 * We've received a probe response, but are not sure whether
2506 * we have or will be receiving any beacons or data, so let's
2507 * schedule the timers again, just in case.
2509 ieee80211_sta_reset_beacon_monitor(sdata);
2511 mod_timer(&ifmgd->conn_mon_timer,
2512 round_jiffies_up(jiffies +
2513 IEEE80211_CONNECTION_IDLE_TIME));
2515 mutex_unlock(&local->mtx);
2518 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
2519 struct ieee80211_hdr *hdr,
2522 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2523 u16 tid = ieee80211_get_tid(hdr);
2524 int ac = ieee80211_ac_from_tid(tid);
2525 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
2526 unsigned long now = jiffies;
2528 if (likely(!tx_tspec->admitted_time))
2531 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
2532 tx_tspec->consumed_tx_time = 0;
2533 tx_tspec->time_slice_start = now;
2535 if (tx_tspec->downgraded) {
2536 tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
2537 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2541 if (tx_tspec->downgraded)
2544 tx_tspec->consumed_tx_time += tx_time;
2546 if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) {
2547 tx_tspec->downgraded = true;
2548 tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE;
2549 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2553 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
2554 struct ieee80211_hdr *hdr, bool ack, u16 tx_time)
2556 ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time);
2558 if (!ieee80211_is_any_nullfunc(hdr->frame_control) ||
2559 !sdata->u.mgd.probe_send_count)
2563 sdata->u.mgd.probe_send_count = 0;
2565 sdata->u.mgd.nullfunc_failed = true;
2566 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
2569 static void ieee80211_mlme_send_probe_req(struct ieee80211_sub_if_data *sdata,
2570 const u8 *src, const u8 *dst,
2571 const u8 *ssid, size_t ssid_len,
2572 struct ieee80211_channel *channel)
2574 struct sk_buff *skb;
2576 skb = ieee80211_build_probe_req(sdata, src, dst, (u32)-1, channel,
2577 ssid, ssid_len, NULL, 0,
2578 IEEE80211_PROBE_FLAG_DIRECTED);
2580 ieee80211_tx_skb(sdata, skb);
2583 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
2585 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2587 u8 *dst = ifmgd->associated->bssid;
2588 u8 unicast_limit = max(1, max_probe_tries - 3);
2589 struct sta_info *sta;
2592 * Try sending broadcast probe requests for the last three
2593 * probe requests after the first ones failed since some
2594 * buggy APs only support broadcast probe requests.
2596 if (ifmgd->probe_send_count >= unicast_limit)
2600 * When the hardware reports an accurate Tx ACK status, it's
2601 * better to send a nullfunc frame instead of a probe request,
2602 * as it will kick us off the AP quickly if we aren't associated
2603 * anymore. The timeout will be reset if the frame is ACKed by
2606 ifmgd->probe_send_count++;
2609 mutex_lock(&sdata->local->sta_mtx);
2610 sta = sta_info_get(sdata, dst);
2612 ieee80211_check_fast_rx(sta);
2613 mutex_unlock(&sdata->local->sta_mtx);
2616 if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) {
2617 ifmgd->nullfunc_failed = false;
2618 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
2619 ifmgd->probe_send_count--;
2621 ieee80211_send_nullfunc(sdata->local, sdata, false);
2626 ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
2627 if (WARN_ON_ONCE(ssid == NULL))
2632 ieee80211_mlme_send_probe_req(sdata, sdata->vif.addr, dst,
2634 ifmgd->associated->channel);
2638 ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
2639 run_again(sdata, ifmgd->probe_timeout);
2642 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
2645 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2646 bool already = false;
2648 if (!ieee80211_sdata_running(sdata))
2653 if (!ifmgd->associated)
2656 mutex_lock(&sdata->local->mtx);
2658 if (sdata->local->tmp_channel || sdata->local->scanning) {
2659 mutex_unlock(&sdata->local->mtx);
2664 mlme_dbg_ratelimited(sdata,
2665 "detected beacon loss from AP (missed %d beacons) - probing\n",
2668 ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL);
2672 * The driver/our work has already reported this event or the
2673 * connection monitoring has kicked in and we have already sent
2674 * a probe request. Or maybe the AP died and the driver keeps
2675 * reporting until we disassociate...
2677 * In either case we have to ignore the current call to this
2678 * function (except for setting the correct probe reason bit)
2679 * because otherwise we would reset the timer every time and
2680 * never check whether we received a probe response!
2682 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
2685 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
2687 mutex_unlock(&sdata->local->mtx);
2692 mutex_lock(&sdata->local->iflist_mtx);
2693 ieee80211_recalc_ps(sdata->local);
2694 mutex_unlock(&sdata->local->iflist_mtx);
2696 ifmgd->probe_send_count = 0;
2697 ieee80211_mgd_probe_ap_send(sdata);
2699 sdata_unlock(sdata);
2702 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
2703 struct ieee80211_vif *vif)
2705 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2706 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2707 struct cfg80211_bss *cbss;
2708 struct sk_buff *skb;
2712 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
2715 sdata_assert_lock(sdata);
2717 if (ifmgd->associated)
2718 cbss = ifmgd->associated;
2719 else if (ifmgd->auth_data)
2720 cbss = ifmgd->auth_data->bss;
2721 else if (ifmgd->assoc_data)
2722 cbss = ifmgd->assoc_data->bss;
2727 ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
2728 if (WARN_ONCE(!ssid || ssid[1] > IEEE80211_MAX_SSID_LEN,
2729 "invalid SSID element (len=%d)", ssid ? ssid[1] : -1))
2734 skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid,
2735 (u32) -1, cbss->channel,
2737 NULL, 0, IEEE80211_PROBE_FLAG_DIRECTED);
2742 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
2744 static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
2745 const u8 *buf, size_t len, bool tx,
2746 u16 reason, bool reconnect)
2748 struct ieee80211_event event = {
2750 .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT,
2751 .u.mlme.reason = reason,
2755 cfg80211_tx_mlme_mgmt(sdata->dev, buf, len, reconnect);
2757 cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
2759 drv_event_callback(sdata->local, sdata, &event);
2762 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
2764 struct ieee80211_local *local = sdata->local;
2765 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2766 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
2770 if (!ifmgd->associated) {
2771 sdata_unlock(sdata);
2775 tx = !sdata->csa_block_tx;
2777 if (!ifmgd->driver_disconnect) {
2779 * AP is probably out of range (or not reachable for another
2780 * reason) so remove the bss struct for that AP.
2782 cfg80211_unlink_bss(local->hw.wiphy, ifmgd->associated);
2785 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
2786 ifmgd->driver_disconnect ?
2787 WLAN_REASON_DEAUTH_LEAVING :
2788 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
2790 mutex_lock(&local->mtx);
2791 sdata->vif.csa_active = false;
2792 ifmgd->csa_waiting_bcn = false;
2793 if (sdata->csa_block_tx) {
2794 ieee80211_wake_vif_queues(local, sdata,
2795 IEEE80211_QUEUE_STOP_REASON_CSA);
2796 sdata->csa_block_tx = false;
2798 mutex_unlock(&local->mtx);
2800 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx,
2801 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
2803 ifmgd->reconnect = false;
2805 sdata_unlock(sdata);
2808 static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
2810 struct ieee80211_sub_if_data *sdata =
2811 container_of(work, struct ieee80211_sub_if_data,
2812 u.mgd.beacon_connection_loss_work);
2813 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2815 if (ifmgd->associated)
2816 ifmgd->beacon_loss_count++;
2818 if (ifmgd->connection_loss) {
2819 sdata_info(sdata, "Connection to AP %pM lost\n",
2821 __ieee80211_disconnect(sdata);
2822 ifmgd->connection_loss = false;
2823 } else if (ifmgd->driver_disconnect) {
2825 "Driver requested disconnection from AP %pM\n",
2827 __ieee80211_disconnect(sdata);
2828 ifmgd->driver_disconnect = false;
2830 ieee80211_mgd_probe_ap(sdata, true);
2834 static void ieee80211_csa_connection_drop_work(struct work_struct *work)
2836 struct ieee80211_sub_if_data *sdata =
2837 container_of(work, struct ieee80211_sub_if_data,
2838 u.mgd.csa_connection_drop_work);
2840 __ieee80211_disconnect(sdata);
2843 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
2845 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2846 struct ieee80211_hw *hw = &sdata->local->hw;
2848 trace_api_beacon_loss(sdata);
2850 sdata->u.mgd.connection_loss = false;
2851 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2853 EXPORT_SYMBOL(ieee80211_beacon_loss);
2855 void ieee80211_connection_loss(struct ieee80211_vif *vif)
2857 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2858 struct ieee80211_hw *hw = &sdata->local->hw;
2860 trace_api_connection_loss(sdata);
2862 sdata->u.mgd.connection_loss = true;
2863 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2865 EXPORT_SYMBOL(ieee80211_connection_loss);
2867 void ieee80211_disconnect(struct ieee80211_vif *vif, bool reconnect)
2869 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2870 struct ieee80211_hw *hw = &sdata->local->hw;
2872 trace_api_disconnect(sdata, reconnect);
2874 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
2877 sdata->u.mgd.driver_disconnect = true;
2878 sdata->u.mgd.reconnect = reconnect;
2879 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2881 EXPORT_SYMBOL(ieee80211_disconnect);
2883 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
2886 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2888 sdata_assert_lock(sdata);
2892 * we are not authenticated yet, the only timer that could be
2893 * running is the timeout for the authentication response which
2894 * which is not relevant anymore.
2896 del_timer_sync(&sdata->u.mgd.timer);
2897 sta_info_destroy_addr(sdata, auth_data->bss->bssid);
2899 eth_zero_addr(sdata->u.mgd.bssid);
2900 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2901 sdata->u.mgd.flags = 0;
2902 mutex_lock(&sdata->local->mtx);
2903 ieee80211_vif_release_channel(sdata);
2904 mutex_unlock(&sdata->local->mtx);
2907 cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
2909 sdata->u.mgd.auth_data = NULL;
2912 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
2913 bool assoc, bool abandon)
2915 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
2917 sdata_assert_lock(sdata);
2921 * we are not associated yet, the only timer that could be
2922 * running is the timeout for the association response which
2923 * which is not relevant anymore.
2925 del_timer_sync(&sdata->u.mgd.timer);
2926 sta_info_destroy_addr(sdata, assoc_data->bss->bssid);
2928 eth_zero_addr(sdata->u.mgd.bssid);
2929 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2930 sdata->u.mgd.flags = 0;
2931 sdata->vif.mu_mimo_owner = false;
2933 mutex_lock(&sdata->local->mtx);
2934 ieee80211_vif_release_channel(sdata);
2935 mutex_unlock(&sdata->local->mtx);
2938 cfg80211_abandon_assoc(sdata->dev, assoc_data->bss);
2942 sdata->u.mgd.assoc_data = NULL;
2945 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
2946 struct ieee80211_mgmt *mgmt, size_t len)
2948 struct ieee80211_local *local = sdata->local;
2949 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2951 struct ieee802_11_elems elems;
2954 pos = mgmt->u.auth.variable;
2955 ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems,
2956 mgmt->bssid, auth_data->bss->bssid);
2957 if (!elems.challenge)
2959 auth_data->expected_transaction = 4;
2960 drv_mgd_prepare_tx(sdata->local, sdata, 0);
2961 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
2962 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
2963 IEEE80211_TX_INTFL_MLME_CONN_TX;
2964 ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
2965 elems.challenge - 2, elems.challenge_len + 2,
2966 auth_data->bss->bssid, auth_data->bss->bssid,
2967 auth_data->key, auth_data->key_len,
2968 auth_data->key_idx, tx_flags);
2971 static bool ieee80211_mark_sta_auth(struct ieee80211_sub_if_data *sdata,
2974 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2975 struct sta_info *sta;
2978 sdata_info(sdata, "authenticated\n");
2979 ifmgd->auth_data->done = true;
2980 ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
2981 ifmgd->auth_data->timeout_started = true;
2982 run_again(sdata, ifmgd->auth_data->timeout);
2984 /* move station state to auth */
2985 mutex_lock(&sdata->local->sta_mtx);
2986 sta = sta_info_get(sdata, bssid);
2988 WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid);
2992 if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
2993 sdata_info(sdata, "failed moving %pM to auth\n", bssid);
2999 mutex_unlock(&sdata->local->sta_mtx);
3003 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
3004 struct ieee80211_mgmt *mgmt, size_t len)
3006 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3008 u16 auth_alg, auth_transaction, status_code;
3009 struct ieee80211_event event = {
3011 .u.mlme.data = AUTH_EVENT,
3014 sdata_assert_lock(sdata);
3019 if (!ifmgd->auth_data || ifmgd->auth_data->done)
3022 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
3024 if (!ether_addr_equal(bssid, mgmt->bssid))
3027 auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
3028 auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
3029 status_code = le16_to_cpu(mgmt->u.auth.status_code);
3031 if (auth_alg != ifmgd->auth_data->algorithm ||
3032 (auth_alg != WLAN_AUTH_SAE &&
3033 auth_transaction != ifmgd->auth_data->expected_transaction) ||
3034 (auth_alg == WLAN_AUTH_SAE &&
3035 (auth_transaction < ifmgd->auth_data->expected_transaction ||
3036 auth_transaction > 2))) {
3037 sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
3038 mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
3040 ifmgd->auth_data->expected_transaction);
3044 if (status_code != WLAN_STATUS_SUCCESS) {
3045 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
3047 if (auth_alg == WLAN_AUTH_SAE &&
3048 (status_code == WLAN_STATUS_ANTI_CLOG_REQUIRED ||
3049 (auth_transaction == 1 &&
3050 (status_code == WLAN_STATUS_SAE_HASH_TO_ELEMENT ||
3051 status_code == WLAN_STATUS_SAE_PK))))
3054 sdata_info(sdata, "%pM denied authentication (status %d)\n",
3055 mgmt->sa, status_code);
3056 ieee80211_destroy_auth_data(sdata, false);
3057 event.u.mlme.status = MLME_DENIED;
3058 event.u.mlme.reason = status_code;
3059 drv_event_callback(sdata->local, sdata, &event);
3063 switch (ifmgd->auth_data->algorithm) {
3064 case WLAN_AUTH_OPEN:
3065 case WLAN_AUTH_LEAP:
3068 case WLAN_AUTH_FILS_SK:
3069 case WLAN_AUTH_FILS_SK_PFS:
3070 case WLAN_AUTH_FILS_PK:
3072 case WLAN_AUTH_SHARED_KEY:
3073 if (ifmgd->auth_data->expected_transaction != 4) {
3074 ieee80211_auth_challenge(sdata, mgmt, len);
3075 /* need another frame */
3080 WARN_ONCE(1, "invalid auth alg %d",
3081 ifmgd->auth_data->algorithm);
3085 event.u.mlme.status = MLME_SUCCESS;
3086 drv_event_callback(sdata->local, sdata, &event);
3087 if (ifmgd->auth_data->algorithm != WLAN_AUTH_SAE ||
3088 (auth_transaction == 2 &&
3089 ifmgd->auth_data->expected_transaction == 2)) {
3090 if (!ieee80211_mark_sta_auth(sdata, bssid))
3091 return; /* ignore frame -- wait for timeout */
3092 } else if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
3093 auth_transaction == 2) {
3094 sdata_info(sdata, "SAE peer confirmed\n");
3095 ifmgd->auth_data->peer_confirmed = true;
3098 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
3101 #define case_WLAN(type) \
3102 case WLAN_REASON_##type: return #type
3104 const char *ieee80211_get_reason_code_string(u16 reason_code)
3106 switch (reason_code) {
3107 case_WLAN(UNSPECIFIED);
3108 case_WLAN(PREV_AUTH_NOT_VALID);
3109 case_WLAN(DEAUTH_LEAVING);
3110 case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
3111 case_WLAN(DISASSOC_AP_BUSY);
3112 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
3113 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
3114 case_WLAN(DISASSOC_STA_HAS_LEFT);
3115 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
3116 case_WLAN(DISASSOC_BAD_POWER);
3117 case_WLAN(DISASSOC_BAD_SUPP_CHAN);
3118 case_WLAN(INVALID_IE);
3119 case_WLAN(MIC_FAILURE);
3120 case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
3121 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
3122 case_WLAN(IE_DIFFERENT);
3123 case_WLAN(INVALID_GROUP_CIPHER);
3124 case_WLAN(INVALID_PAIRWISE_CIPHER);
3125 case_WLAN(INVALID_AKMP);
3126 case_WLAN(UNSUPP_RSN_VERSION);
3127 case_WLAN(INVALID_RSN_IE_CAP);
3128 case_WLAN(IEEE8021X_FAILED);
3129 case_WLAN(CIPHER_SUITE_REJECTED);
3130 case_WLAN(DISASSOC_UNSPECIFIED_QOS);
3131 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
3132 case_WLAN(DISASSOC_LOW_ACK);
3133 case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
3134 case_WLAN(QSTA_LEAVE_QBSS);
3135 case_WLAN(QSTA_NOT_USE);
3136 case_WLAN(QSTA_REQUIRE_SETUP);
3137 case_WLAN(QSTA_TIMEOUT);
3138 case_WLAN(QSTA_CIPHER_NOT_SUPP);
3139 case_WLAN(MESH_PEER_CANCELED);
3140 case_WLAN(MESH_MAX_PEERS);
3141 case_WLAN(MESH_CONFIG);
3142 case_WLAN(MESH_CLOSE);
3143 case_WLAN(MESH_MAX_RETRIES);
3144 case_WLAN(MESH_CONFIRM_TIMEOUT);
3145 case_WLAN(MESH_INVALID_GTK);
3146 case_WLAN(MESH_INCONSISTENT_PARAM);
3147 case_WLAN(MESH_INVALID_SECURITY);
3148 case_WLAN(MESH_PATH_ERROR);
3149 case_WLAN(MESH_PATH_NOFORWARD);
3150 case_WLAN(MESH_PATH_DEST_UNREACHABLE);
3151 case_WLAN(MAC_EXISTS_IN_MBSS);
3152 case_WLAN(MESH_CHAN_REGULATORY);
3153 case_WLAN(MESH_CHAN);
3154 default: return "<unknown>";
3158 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
3159 struct ieee80211_mgmt *mgmt, size_t len)
3161 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3162 u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
3164 sdata_assert_lock(sdata);
3169 if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
3170 ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
3174 if (ifmgd->associated &&
3175 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) {
3176 const u8 *bssid = ifmgd->associated->bssid;
3178 sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
3180 ieee80211_get_reason_code_string(reason_code));
3182 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
3184 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
3185 reason_code, false);
3189 if (ifmgd->assoc_data &&
3190 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
3191 const u8 *bssid = ifmgd->assoc_data->bss->bssid;
3194 "deauthenticated from %pM while associating (Reason: %u=%s)\n",
3196 ieee80211_get_reason_code_string(reason_code));
3198 ieee80211_destroy_assoc_data(sdata, false, true);
3200 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
3206 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
3207 struct ieee80211_mgmt *mgmt, size_t len)
3209 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3212 sdata_assert_lock(sdata);
3217 if (!ifmgd->associated ||
3218 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3221 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
3223 if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
3224 ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
3228 sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
3229 mgmt->sa, reason_code,
3230 ieee80211_get_reason_code_string(reason_code));
3232 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
3234 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code,
3238 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
3239 u8 *supp_rates, unsigned int supp_rates_len,
3240 u32 *rates, u32 *basic_rates,
3241 bool *have_higher_than_11mbit,
3242 int *min_rate, int *min_rate_index,
3247 for (i = 0; i < supp_rates_len; i++) {
3248 int rate = supp_rates[i] & 0x7f;
3249 bool is_basic = !!(supp_rates[i] & 0x80);
3251 if ((rate * 5 * (1 << shift)) > 110)
3252 *have_higher_than_11mbit = true;
3255 * Skip HT, VHT, HE and SAE H2E only BSS membership selectors
3256 * since they're not rates.
3258 * Note: Even though the membership selector and the basic
3259 * rate flag share the same bit, they are not exactly
3262 if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) ||
3263 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY) ||
3264 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HE_PHY) ||
3265 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_SAE_H2E))
3268 for (j = 0; j < sband->n_bitrates; j++) {
3269 struct ieee80211_rate *br;
3272 br = &sband->bitrates[j];
3274 brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
3275 if (brate == rate) {
3278 *basic_rates |= BIT(j);
3279 if ((rate * 5) < *min_rate) {
3280 *min_rate = rate * 5;
3281 *min_rate_index = j;
3289 static bool ieee80211_twt_req_supported(const struct sta_info *sta,
3290 const struct ieee802_11_elems *elems)
3292 if (elems->ext_capab_len < 10)
3295 if (!(elems->ext_capab[9] & WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT))
3298 return sta->sta.he_cap.he_cap_elem.mac_cap_info[0] &
3299 IEEE80211_HE_MAC_CAP0_TWT_RES;
3302 static int ieee80211_recalc_twt_req(struct ieee80211_sub_if_data *sdata,
3303 struct sta_info *sta,
3304 struct ieee802_11_elems *elems)
3306 bool twt = ieee80211_twt_req_supported(sta, elems);
3308 if (sdata->vif.bss_conf.twt_requester != twt) {
3309 sdata->vif.bss_conf.twt_requester = twt;
3310 return BSS_CHANGED_TWT;
3315 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
3316 struct cfg80211_bss *cbss,
3317 struct ieee80211_mgmt *mgmt, size_t len,
3318 struct ieee802_11_elems *elems)
3320 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3321 struct ieee80211_local *local = sdata->local;
3322 struct ieee80211_supported_band *sband;
3323 struct sta_info *sta;
3324 u16 capab_info, aid;
3325 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
3326 const struct cfg80211_bss_ies *bss_ies = NULL;
3327 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
3328 bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
3329 bool is_s1g = cbss->channel->band == NL80211_BAND_S1GHZ;
3335 /* AssocResp and ReassocResp have identical structure */
3337 pos = mgmt->u.assoc_resp.variable;
3338 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
3340 pos = (u8 *) mgmt->u.s1g_assoc_resp.variable;
3343 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3344 ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, elems,
3345 mgmt->bssid, assoc_data->bss->bssid);
3347 if (elems->aid_resp)
3348 aid = le16_to_cpu(elems->aid_resp->aid);
3351 * The 5 MSB of the AID field are reserved
3352 * (802.11-2016 9.4.1.8 AID field)
3356 ifmgd->broken_ap = false;
3358 if (aid == 0 || aid > IEEE80211_MAX_AID) {
3359 sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
3362 ifmgd->broken_ap = true;
3365 if (!is_s1g && !elems->supp_rates) {
3366 sdata_info(sdata, "no SuppRates element in AssocResp\n");
3370 sdata->vif.bss_conf.aid = aid;
3371 ifmgd->tdls_chan_switch_prohibited =
3372 elems->ext_capab && elems->ext_capab_len >= 5 &&
3373 (elems->ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
3376 * Some APs are erroneously not including some information in their
3377 * (re)association response frames. Try to recover by using the data
3378 * from the beacon or probe response. This seems to afflict mobile
3379 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
3380 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
3383 ((assoc_data->wmm && !elems->wmm_param) ||
3384 (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
3385 (!elems->ht_cap_elem || !elems->ht_operation)) ||
3386 (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
3387 (!elems->vht_cap_elem || !elems->vht_operation)))) {
3388 const struct cfg80211_bss_ies *ies;
3389 struct ieee802_11_elems bss_elems;
3392 ies = rcu_dereference(cbss->ies);
3394 bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
3400 ieee802_11_parse_elems(bss_ies->data, bss_ies->len,
3403 assoc_data->bss->bssid);
3404 if (assoc_data->wmm &&
3405 !elems->wmm_param && bss_elems.wmm_param) {
3406 elems->wmm_param = bss_elems.wmm_param;
3408 "AP bug: WMM param missing from AssocResp\n");
3412 * Also check if we requested HT/VHT, otherwise the AP doesn't
3413 * have to include the IEs in the (re)association response.
3415 if (!elems->ht_cap_elem && bss_elems.ht_cap_elem &&
3416 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
3417 elems->ht_cap_elem = bss_elems.ht_cap_elem;
3419 "AP bug: HT capability missing from AssocResp\n");
3421 if (!elems->ht_operation && bss_elems.ht_operation &&
3422 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
3423 elems->ht_operation = bss_elems.ht_operation;
3425 "AP bug: HT operation missing from AssocResp\n");
3427 if (!elems->vht_cap_elem && bss_elems.vht_cap_elem &&
3428 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
3429 elems->vht_cap_elem = bss_elems.vht_cap_elem;
3431 "AP bug: VHT capa missing from AssocResp\n");
3433 if (!elems->vht_operation && bss_elems.vht_operation &&
3434 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
3435 elems->vht_operation = bss_elems.vht_operation;
3437 "AP bug: VHT operation missing from AssocResp\n");
3442 * We previously checked these in the beacon/probe response, so
3443 * they should be present here. This is just a safety net.
3445 if (!is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
3446 (!elems->wmm_param || !elems->ht_cap_elem || !elems->ht_operation)) {
3448 "HT AP is missing WMM params or HT capability/operation\n");
3453 if (!is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
3454 (!elems->vht_cap_elem || !elems->vht_operation)) {
3456 "VHT AP is missing VHT capability/operation\n");
3461 if (is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) &&
3462 !elems->he_6ghz_capa) {
3464 "HE 6 GHz AP is missing HE 6 GHz band capability\n");
3469 mutex_lock(&sdata->local->sta_mtx);
3471 * station info was already allocated and inserted before
3472 * the association and should be available to us
3474 sta = sta_info_get(sdata, cbss->bssid);
3475 if (WARN_ON(!sta)) {
3476 mutex_unlock(&sdata->local->sta_mtx);
3481 sband = ieee80211_get_sband(sdata);
3483 mutex_unlock(&sdata->local->sta_mtx);
3488 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) &&
3489 (!elems->he_cap || !elems->he_operation)) {
3490 mutex_unlock(&sdata->local->sta_mtx);
3492 "HE AP is missing HE capability/operation\n");
3497 /* Set up internal HT/VHT capabilities */
3498 if (elems->ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
3499 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
3500 elems->ht_cap_elem, sta);
3502 if (elems->vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
3503 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
3504 elems->vht_cap_elem, sta);
3506 if (elems->he_operation && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) &&
3508 ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband,
3511 elems->he_6ghz_capa,
3514 bss_conf->he_support = sta->sta.he_cap.has_he;
3515 if (elems->rsnx && elems->rsnx_len &&
3516 (elems->rsnx[0] & WLAN_RSNX_CAPA_PROTECTED_TWT) &&
3517 wiphy_ext_feature_isset(local->hw.wiphy,
3518 NL80211_EXT_FEATURE_PROTECTED_TWT))
3519 bss_conf->twt_protected = true;
3521 bss_conf->twt_protected = false;
3523 changed |= ieee80211_recalc_twt_req(sdata, sta, elems);
3525 bss_conf->he_support = false;
3526 bss_conf->twt_requester = false;
3527 bss_conf->twt_protected = false;
3530 if (bss_conf->he_support) {
3531 bss_conf->he_bss_color.color =
3532 le32_get_bits(elems->he_operation->he_oper_params,
3533 IEEE80211_HE_OPERATION_BSS_COLOR_MASK);
3534 bss_conf->he_bss_color.partial =
3535 le32_get_bits(elems->he_operation->he_oper_params,
3536 IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR);
3537 bss_conf->he_bss_color.enabled =
3538 !le32_get_bits(elems->he_operation->he_oper_params,
3539 IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED);
3541 if (bss_conf->he_bss_color.enabled)
3542 changed |= BSS_CHANGED_HE_BSS_COLOR;
3544 bss_conf->htc_trig_based_pkt_ext =
3545 le32_get_bits(elems->he_operation->he_oper_params,
3546 IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK);
3547 bss_conf->frame_time_rts_th =
3548 le32_get_bits(elems->he_operation->he_oper_params,
3549 IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
3551 bss_conf->uora_exists = !!elems->uora_element;
3552 if (elems->uora_element)
3553 bss_conf->uora_ocw_range = elems->uora_element[0];
3555 ieee80211_he_op_ie_to_bss_conf(&sdata->vif, elems->he_operation);
3556 ieee80211_he_spr_ie_to_bss_conf(&sdata->vif, elems->he_spr);
3557 /* TODO: OPEN: what happens if BSS color disable is set? */
3560 if (cbss->transmitted_bss) {
3561 bss_conf->nontransmitted = true;
3562 ether_addr_copy(bss_conf->transmitter_bssid,
3563 cbss->transmitted_bss->bssid);
3564 bss_conf->bssid_indicator = cbss->max_bssid_indicator;
3565 bss_conf->bssid_index = cbss->bssid_index;
3569 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
3570 * in their association response, so ignore that data for our own
3571 * configuration. If it changed since the last beacon, we'll get the
3572 * next beacon and update then.
3576 * If an operating mode notification IE is present, override the
3577 * NSS calculation (that would be done in rate_control_rate_init())
3578 * and use the # of streams from that element.
3580 if (elems->opmode_notif &&
3581 !(*elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
3584 nss = *elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
3585 nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
3587 sta->sta.rx_nss = nss;
3590 rate_control_rate_init(sta);
3592 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) {
3593 set_sta_flag(sta, WLAN_STA_MFP);
3594 sta->sta.mfp = true;
3596 sta->sta.mfp = false;
3599 sta->sta.wme = (elems->wmm_param || elems->s1g_capab) &&
3600 local->hw.queues >= IEEE80211_NUM_ACS;
3602 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
3603 if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
3604 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
3607 "failed to move station %pM to desired state\n",
3609 WARN_ON(__sta_info_destroy(sta));
3610 mutex_unlock(&sdata->local->sta_mtx);
3615 if (sdata->wdev.use_4addr)
3616 drv_sta_set_4addr(local, sdata, &sta->sta, true);
3618 mutex_unlock(&sdata->local->sta_mtx);
3621 * Always handle WMM once after association regardless
3622 * of the first value the AP uses. Setting -1 here has
3623 * that effect because the AP values is an unsigned
3626 ifmgd->wmm_last_param_set = -1;
3627 ifmgd->mu_edca_last_param_set = -1;
3629 if (ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
3630 ieee80211_set_wmm_default(sdata, false, false);
3631 } else if (!ieee80211_sta_wmm_params(local, sdata, elems->wmm_param,
3632 elems->wmm_param_len,
3633 elems->mu_edca_param_set)) {
3634 /* still enable QoS since we might have HT/VHT */
3635 ieee80211_set_wmm_default(sdata, false, true);
3636 /* set the disable-WMM flag in this case to disable
3637 * tracking WMM parameter changes in the beacon if
3638 * the parameters weren't actually valid. Doing so
3639 * avoids changing parameters very strangely when
3640 * the AP is going back and forth between valid and
3641 * invalid parameters.
3643 ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
3645 changed |= BSS_CHANGED_QOS;
3647 if (elems->max_idle_period_ie) {
3648 bss_conf->max_idle_period =
3649 le16_to_cpu(elems->max_idle_period_ie->max_idle_period);
3650 bss_conf->protected_keep_alive =
3651 !!(elems->max_idle_period_ie->idle_options &
3652 WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE);
3653 changed |= BSS_CHANGED_KEEP_ALIVE;
3655 bss_conf->max_idle_period = 0;
3656 bss_conf->protected_keep_alive = false;
3659 /* set assoc capability (AID was already set earlier),
3660 * ieee80211_set_associated() will tell the driver */
3661 bss_conf->assoc_capability = capab_info;
3662 ieee80211_set_associated(sdata, cbss, changed);
3665 * If we're using 4-addr mode, let the AP know that we're
3666 * doing so, so that it can create the STA VLAN on its side
3668 if (ifmgd->use_4addr)
3669 ieee80211_send_4addr_nullfunc(local, sdata);
3672 * Start timer to probe the connection to the AP now.
3673 * Also start the timer that will detect beacon loss.
3675 ieee80211_sta_reset_beacon_monitor(sdata);
3676 ieee80211_sta_reset_conn_monitor(sdata);
3684 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
3685 struct ieee80211_mgmt *mgmt,
3688 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3689 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
3690 u16 capab_info, status_code, aid;
3691 struct ieee802_11_elems elems;
3692 int ac, uapsd_queues = -1;
3695 struct cfg80211_bss *cbss;
3696 struct ieee80211_event event = {
3698 .u.mlme.data = ASSOC_EVENT,
3701 sdata_assert_lock(sdata);
3706 if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
3709 cbss = assoc_data->bss;
3712 * AssocResp and ReassocResp have identical structure, so process both
3713 * of them in this function.
3719 reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control);
3720 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3721 status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
3722 pos = mgmt->u.assoc_resp.variable;
3723 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
3724 if (cbss->channel->band == NL80211_BAND_S1GHZ) {
3725 pos = (u8 *) mgmt->u.s1g_assoc_resp.variable;
3730 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
3731 reassoc ? "Rea" : "A", mgmt->sa,
3732 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
3734 if (assoc_data->fils_kek_len &&
3735 fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0)
3738 ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems,
3739 mgmt->bssid, assoc_data->bss->bssid);
3741 if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
3742 elems.timeout_int &&
3743 elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
3745 tu = le32_to_cpu(elems.timeout_int->value);
3746 ms = tu * 1024 / 1000;
3748 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
3750 assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
3751 assoc_data->timeout_started = true;
3752 if (ms > IEEE80211_ASSOC_TIMEOUT)
3753 run_again(sdata, assoc_data->timeout);
3757 if (status_code != WLAN_STATUS_SUCCESS) {
3758 sdata_info(sdata, "%pM denied association (code=%d)\n",
3759 mgmt->sa, status_code);
3760 ieee80211_destroy_assoc_data(sdata, false, false);
3761 event.u.mlme.status = MLME_DENIED;
3762 event.u.mlme.reason = status_code;
3763 drv_event_callback(sdata->local, sdata, &event);
3765 if (!ieee80211_assoc_success(sdata, cbss, mgmt, len, &elems)) {
3766 /* oops -- internal error -- send timeout for now */
3767 ieee80211_destroy_assoc_data(sdata, false, false);
3768 cfg80211_assoc_timeout(sdata->dev, cbss);
3771 event.u.mlme.status = MLME_SUCCESS;
3772 drv_event_callback(sdata->local, sdata, &event);
3773 sdata_info(sdata, "associated\n");
3776 * destroy assoc_data afterwards, as otherwise an idle
3777 * recalc after assoc_data is NULL but before associated
3778 * is set can cause the interface to go idle
3780 ieee80211_destroy_assoc_data(sdata, true, false);
3782 /* get uapsd queues configuration */
3784 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
3785 if (sdata->tx_conf[ac].uapsd)
3786 uapsd_queues |= ieee80211_ac_to_qos_mask[ac];
3789 cfg80211_rx_assoc_resp(sdata->dev, cbss, (u8 *)mgmt, len, uapsd_queues,
3790 ifmgd->assoc_req_ies, ifmgd->assoc_req_ies_len);
3793 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
3794 struct ieee80211_mgmt *mgmt, size_t len,
3795 struct ieee80211_rx_status *rx_status)
3797 struct ieee80211_local *local = sdata->local;
3798 struct ieee80211_bss *bss;
3799 struct ieee80211_channel *channel;
3801 sdata_assert_lock(sdata);
3803 channel = ieee80211_get_channel_khz(local->hw.wiphy,
3804 ieee80211_rx_status_to_khz(rx_status));
3808 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, channel);
3810 sdata->vif.bss_conf.beacon_rate = bss->beacon_rate;
3811 ieee80211_rx_bss_put(local, bss);
3816 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
3817 struct sk_buff *skb)
3819 struct ieee80211_mgmt *mgmt = (void *)skb->data;
3820 struct ieee80211_if_managed *ifmgd;
3821 struct ieee80211_rx_status *rx_status = (void *) skb->cb;
3822 struct ieee80211_channel *channel;
3823 size_t baselen, len = skb->len;
3825 ifmgd = &sdata->u.mgd;
3827 sdata_assert_lock(sdata);
3830 * According to Draft P802.11ax D6.0 clause 26.17.2.3.2:
3831 * "If a 6 GHz AP receives a Probe Request frame and responds with
3832 * a Probe Response frame [..], the Address 1 field of the Probe
3833 * Response frame shall be set to the broadcast address [..]"
3834 * So, on 6GHz band we should also accept broadcast responses.
3836 channel = ieee80211_get_channel(sdata->local->hw.wiphy,
3841 if (!ether_addr_equal(mgmt->da, sdata->vif.addr) &&
3842 (channel->band != NL80211_BAND_6GHZ ||
3843 !is_broadcast_ether_addr(mgmt->da)))
3844 return; /* ignore ProbeResp to foreign address */
3846 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
3850 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status);
3852 if (ifmgd->associated &&
3853 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3854 ieee80211_reset_ap_probe(sdata);
3858 * This is the canonical list of information elements we care about,
3859 * the filter code also gives us all changes to the Microsoft OUI
3860 * (00:50:F2) vendor IE which is used for WMM which we need to track,
3861 * as well as the DTPC IE (part of the Cisco OUI) used for signaling
3862 * changes to requested client power.
3864 * We implement beacon filtering in software since that means we can
3865 * avoid processing the frame here and in cfg80211, and userspace
3866 * will not be able to tell whether the hardware supports it or not.
3868 * XXX: This list needs to be dynamic -- userspace needs to be able to
3869 * add items it requires. It also needs to be able to tell us to
3870 * look out for other vendor IEs.
3872 static const u64 care_about_ies =
3873 (1ULL << WLAN_EID_COUNTRY) |
3874 (1ULL << WLAN_EID_ERP_INFO) |
3875 (1ULL << WLAN_EID_CHANNEL_SWITCH) |
3876 (1ULL << WLAN_EID_PWR_CONSTRAINT) |
3877 (1ULL << WLAN_EID_HT_CAPABILITY) |
3878 (1ULL << WLAN_EID_HT_OPERATION) |
3879 (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
3881 static void ieee80211_handle_beacon_sig(struct ieee80211_sub_if_data *sdata,
3882 struct ieee80211_if_managed *ifmgd,
3883 struct ieee80211_bss_conf *bss_conf,
3884 struct ieee80211_local *local,
3885 struct ieee80211_rx_status *rx_status)
3887 /* Track average RSSI from the Beacon frames of the current AP */
3889 if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
3890 ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
3891 ewma_beacon_signal_init(&ifmgd->ave_beacon_signal);
3892 ifmgd->last_cqm_event_signal = 0;
3893 ifmgd->count_beacon_signal = 1;
3894 ifmgd->last_ave_beacon_signal = 0;
3896 ifmgd->count_beacon_signal++;
3899 ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal);
3901 if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
3902 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3903 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3904 int last_sig = ifmgd->last_ave_beacon_signal;
3905 struct ieee80211_event event = {
3910 * if signal crosses either of the boundaries, invoke callback
3911 * with appropriate parameters
3913 if (sig > ifmgd->rssi_max_thold &&
3914 (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
3915 ifmgd->last_ave_beacon_signal = sig;
3916 event.u.rssi.data = RSSI_EVENT_HIGH;
3917 drv_event_callback(local, sdata, &event);
3918 } else if (sig < ifmgd->rssi_min_thold &&
3919 (last_sig >= ifmgd->rssi_max_thold ||
3921 ifmgd->last_ave_beacon_signal = sig;
3922 event.u.rssi.data = RSSI_EVENT_LOW;
3923 drv_event_callback(local, sdata, &event);
3927 if (bss_conf->cqm_rssi_thold &&
3928 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
3929 !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
3930 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3931 int last_event = ifmgd->last_cqm_event_signal;
3932 int thold = bss_conf->cqm_rssi_thold;
3933 int hyst = bss_conf->cqm_rssi_hyst;
3936 (last_event == 0 || sig < last_event - hyst)) {
3937 ifmgd->last_cqm_event_signal = sig;
3938 ieee80211_cqm_rssi_notify(
3940 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3942 } else if (sig > thold &&
3943 (last_event == 0 || sig > last_event + hyst)) {
3944 ifmgd->last_cqm_event_signal = sig;
3945 ieee80211_cqm_rssi_notify(
3947 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3952 if (bss_conf->cqm_rssi_low &&
3953 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3954 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3955 int last_event = ifmgd->last_cqm_event_signal;
3956 int low = bss_conf->cqm_rssi_low;
3957 int high = bss_conf->cqm_rssi_high;
3960 (last_event == 0 || last_event >= low)) {
3961 ifmgd->last_cqm_event_signal = sig;
3962 ieee80211_cqm_rssi_notify(
3964 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3966 } else if (sig > high &&
3967 (last_event == 0 || last_event <= high)) {
3968 ifmgd->last_cqm_event_signal = sig;
3969 ieee80211_cqm_rssi_notify(
3971 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3977 static bool ieee80211_rx_our_beacon(const u8 *tx_bssid,
3978 struct cfg80211_bss *bss)
3980 if (ether_addr_equal(tx_bssid, bss->bssid))
3982 if (!bss->transmitted_bss)
3984 return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid);
3987 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
3988 struct ieee80211_hdr *hdr, size_t len,
3989 struct ieee80211_rx_status *rx_status)
3991 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3992 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
3993 struct ieee80211_mgmt *mgmt = (void *) hdr;
3995 struct ieee802_11_elems elems;
3996 struct ieee80211_local *local = sdata->local;
3997 struct ieee80211_chanctx_conf *chanctx_conf;
3998 struct ieee80211_channel *chan;
3999 struct sta_info *sta;
4004 u8 *bssid, *variable = mgmt->u.beacon.variable;
4005 u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
4007 sdata_assert_lock(sdata);
4009 /* Process beacon from the current BSS */
4010 bssid = ieee80211_get_bssid(hdr, len, sdata->vif.type);
4011 if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
4012 struct ieee80211_ext *ext = (void *) mgmt;
4014 if (ieee80211_is_s1g_short_beacon(ext->frame_control))
4015 variable = ext->u.s1g_short_beacon.variable;
4017 variable = ext->u.s1g_beacon.variable;
4020 baselen = (u8 *) variable - (u8 *) mgmt;
4025 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
4026 if (!chanctx_conf) {
4031 if (ieee80211_rx_status_to_khz(rx_status) !=
4032 ieee80211_channel_to_khz(chanctx_conf->def.chan)) {
4036 chan = chanctx_conf->def.chan;
4039 if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
4040 ieee80211_rx_our_beacon(bssid, ifmgd->assoc_data->bss)) {
4041 ieee802_11_parse_elems(variable,
4042 len - baselen, false, &elems,
4044 ifmgd->assoc_data->bss->bssid);
4046 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status);
4048 if (elems.dtim_period)
4049 ifmgd->dtim_period = elems.dtim_period;
4050 ifmgd->have_beacon = true;
4051 ifmgd->assoc_data->need_beacon = false;
4052 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
4053 sdata->vif.bss_conf.sync_tsf =
4054 le64_to_cpu(mgmt->u.beacon.timestamp);
4055 sdata->vif.bss_conf.sync_device_ts =
4056 rx_status->device_timestamp;
4057 sdata->vif.bss_conf.sync_dtim_count = elems.dtim_count;
4060 if (elems.mbssid_config_ie)
4061 bss_conf->profile_periodicity =
4062 elems.mbssid_config_ie->profile_periodicity;
4064 if (elems.ext_capab_len >= 11 &&
4065 (elems.ext_capab[10] & WLAN_EXT_CAPA11_EMA_SUPPORT))
4066 bss_conf->ema_ap = true;
4068 /* continue assoc process */
4069 ifmgd->assoc_data->timeout = jiffies;
4070 ifmgd->assoc_data->timeout_started = true;
4071 run_again(sdata, ifmgd->assoc_data->timeout);
4075 if (!ifmgd->associated ||
4076 !ieee80211_rx_our_beacon(bssid, ifmgd->associated))
4078 bssid = ifmgd->associated->bssid;
4080 if (!(rx_status->flag & RX_FLAG_NO_SIGNAL_VAL))
4081 ieee80211_handle_beacon_sig(sdata, ifmgd, bss_conf,
4084 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
4085 mlme_dbg_ratelimited(sdata,
4086 "cancelling AP probe due to a received beacon\n");
4087 ieee80211_reset_ap_probe(sdata);
4091 * Push the beacon loss detection into the future since
4092 * we are processing a beacon from the AP just now.
4094 ieee80211_sta_reset_beacon_monitor(sdata);
4096 /* TODO: CRC urrently not calculated on S1G Beacon Compatibility
4097 * element (which carries the beacon interval). Don't forget to add a
4098 * bit to care_about_ies[] above if mac80211 is interested in a
4099 * changing S1G element.
4101 if (!ieee80211_is_s1g_beacon(hdr->frame_control))
4102 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
4103 ncrc = ieee802_11_parse_elems_crc(variable,
4104 len - baselen, false, &elems,
4105 care_about_ies, ncrc,
4106 mgmt->bssid, bssid);
4108 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
4109 ieee80211_check_tim(elems.tim, elems.tim_len, bss_conf->aid)) {
4110 if (local->hw.conf.dynamic_ps_timeout > 0) {
4111 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
4112 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
4113 ieee80211_hw_config(local,
4114 IEEE80211_CONF_CHANGE_PS);
4116 ieee80211_send_nullfunc(local, sdata, false);
4117 } else if (!local->pspolling && sdata->u.mgd.powersave) {
4118 local->pspolling = true;
4121 * Here is assumed that the driver will be
4122 * able to send ps-poll frame and receive a
4123 * response even though power save mode is
4124 * enabled, but some drivers might require
4125 * to disable power save here. This needs
4126 * to be investigated.
4128 ieee80211_send_pspoll(local, sdata);
4132 if (sdata->vif.p2p ||
4133 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
4134 struct ieee80211_p2p_noa_attr noa = {};
4137 ret = cfg80211_get_p2p_attr(variable,
4139 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
4140 (u8 *) &noa, sizeof(noa));
4142 if (sdata->u.mgd.p2p_noa_index != noa.index) {
4143 /* valid noa_attr and index changed */
4144 sdata->u.mgd.p2p_noa_index = noa.index;
4145 memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
4146 changed |= BSS_CHANGED_P2P_PS;
4148 * make sure we update all information, the CRC
4149 * mechanism doesn't look at P2P attributes.
4151 ifmgd->beacon_crc_valid = false;
4153 } else if (sdata->u.mgd.p2p_noa_index != -1) {
4154 /* noa_attr not found and we had valid noa_attr before */
4155 sdata->u.mgd.p2p_noa_index = -1;
4156 memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
4157 changed |= BSS_CHANGED_P2P_PS;
4158 ifmgd->beacon_crc_valid = false;
4162 if (ifmgd->csa_waiting_bcn)
4163 ieee80211_chswitch_post_beacon(sdata);
4166 * Update beacon timing and dtim count on every beacon appearance. This
4167 * will allow the driver to use the most updated values. Do it before
4168 * comparing this one with last received beacon.
4169 * IMPORTANT: These parameters would possibly be out of sync by the time
4170 * the driver will use them. The synchronized view is currently
4171 * guaranteed only in certain callbacks.
4173 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY) &&
4174 !ieee80211_is_s1g_beacon(hdr->frame_control)) {
4175 sdata->vif.bss_conf.sync_tsf =
4176 le64_to_cpu(mgmt->u.beacon.timestamp);
4177 sdata->vif.bss_conf.sync_device_ts =
4178 rx_status->device_timestamp;
4179 sdata->vif.bss_conf.sync_dtim_count = elems.dtim_count;
4182 if ((ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid) ||
4183 ieee80211_is_s1g_short_beacon(mgmt->frame_control))
4185 ifmgd->beacon_crc = ncrc;
4186 ifmgd->beacon_crc_valid = true;
4188 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status);
4190 ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
4191 rx_status->device_timestamp,
4194 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) &&
4195 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
4196 elems.wmm_param_len,
4197 elems.mu_edca_param_set))
4198 changed |= BSS_CHANGED_QOS;
4201 * If we haven't had a beacon before, tell the driver about the
4202 * DTIM period (and beacon timing if desired) now.
4204 if (!ifmgd->have_beacon) {
4205 /* a few bogus AP send dtim_period = 0 or no TIM IE */
4206 bss_conf->dtim_period = elems.dtim_period ?: 1;
4208 changed |= BSS_CHANGED_BEACON_INFO;
4209 ifmgd->have_beacon = true;
4211 mutex_lock(&local->iflist_mtx);
4212 ieee80211_recalc_ps(local);
4213 mutex_unlock(&local->iflist_mtx);
4215 ieee80211_recalc_ps_vif(sdata);
4218 if (elems.erp_info) {
4220 erp_value = elems.erp_info[0];
4225 if (!ieee80211_is_s1g_beacon(hdr->frame_control))
4226 changed |= ieee80211_handle_bss_capability(sdata,
4227 le16_to_cpu(mgmt->u.beacon.capab_info),
4228 erp_valid, erp_value);
4230 mutex_lock(&local->sta_mtx);
4231 sta = sta_info_get(sdata, bssid);
4233 changed |= ieee80211_recalc_twt_req(sdata, sta, &elems);
4235 if (ieee80211_config_bw(sdata, sta, elems.ht_cap_elem,
4236 elems.vht_cap_elem, elems.ht_operation,
4237 elems.vht_operation, elems.he_operation,
4238 elems.s1g_oper, bssid, &changed)) {
4239 mutex_unlock(&local->sta_mtx);
4241 "failed to follow AP %pM bandwidth change, disconnect\n",
4243 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4244 WLAN_REASON_DEAUTH_LEAVING,
4246 ieee80211_report_disconnect(sdata, deauth_buf,
4247 sizeof(deauth_buf), true,
4248 WLAN_REASON_DEAUTH_LEAVING,
4253 if (sta && elems.opmode_notif)
4254 ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
4256 mutex_unlock(&local->sta_mtx);
4258 changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
4260 elems.country_elem_len,
4261 elems.pwr_constr_elem,
4262 elems.cisco_dtpc_elem);
4264 ieee80211_bss_info_change_notify(sdata, changed);
4267 void ieee80211_sta_rx_queued_ext(struct ieee80211_sub_if_data *sdata,
4268 struct sk_buff *skb)
4270 struct ieee80211_rx_status *rx_status;
4271 struct ieee80211_hdr *hdr;
4274 rx_status = (struct ieee80211_rx_status *) skb->cb;
4275 hdr = (struct ieee80211_hdr *) skb->data;
4276 fc = le16_to_cpu(hdr->frame_control);
4279 switch (fc & IEEE80211_FCTL_STYPE) {
4280 case IEEE80211_STYPE_S1G_BEACON:
4281 ieee80211_rx_mgmt_beacon(sdata, hdr, skb->len, rx_status);
4284 sdata_unlock(sdata);
4287 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
4288 struct sk_buff *skb)
4290 struct ieee80211_rx_status *rx_status;
4291 struct ieee80211_mgmt *mgmt;
4293 struct ieee802_11_elems elems;
4296 rx_status = (struct ieee80211_rx_status *) skb->cb;
4297 mgmt = (struct ieee80211_mgmt *) skb->data;
4298 fc = le16_to_cpu(mgmt->frame_control);
4302 switch (fc & IEEE80211_FCTL_STYPE) {
4303 case IEEE80211_STYPE_BEACON:
4304 ieee80211_rx_mgmt_beacon(sdata, (void *)mgmt,
4305 skb->len, rx_status);
4307 case IEEE80211_STYPE_PROBE_RESP:
4308 ieee80211_rx_mgmt_probe_resp(sdata, skb);
4310 case IEEE80211_STYPE_AUTH:
4311 ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
4313 case IEEE80211_STYPE_DEAUTH:
4314 ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
4316 case IEEE80211_STYPE_DISASSOC:
4317 ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
4319 case IEEE80211_STYPE_ASSOC_RESP:
4320 case IEEE80211_STYPE_REASSOC_RESP:
4321 ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
4323 case IEEE80211_STYPE_ACTION:
4324 if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
4325 ies_len = skb->len -
4326 offsetof(struct ieee80211_mgmt,
4327 u.action.u.chan_switch.variable);
4332 /* CSA IE cannot be overridden, no need for BSSID */
4333 ieee802_11_parse_elems(
4334 mgmt->u.action.u.chan_switch.variable,
4335 ies_len, true, &elems, mgmt->bssid, NULL);
4337 if (elems.parse_error)
4340 ieee80211_sta_process_chanswitch(sdata,
4342 rx_status->device_timestamp,
4344 } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
4345 ies_len = skb->len -
4346 offsetof(struct ieee80211_mgmt,
4347 u.action.u.ext_chan_switch.variable);
4353 * extended CSA IE can't be overridden, no need for
4356 ieee802_11_parse_elems(
4357 mgmt->u.action.u.ext_chan_switch.variable,
4358 ies_len, true, &elems, mgmt->bssid, NULL);
4360 if (elems.parse_error)
4363 /* for the handling code pretend this was also an IE */
4364 elems.ext_chansw_ie =
4365 &mgmt->u.action.u.ext_chan_switch.data;
4367 ieee80211_sta_process_chanswitch(sdata,
4369 rx_status->device_timestamp,
4374 sdata_unlock(sdata);
4377 static void ieee80211_sta_timer(struct timer_list *t)
4379 struct ieee80211_sub_if_data *sdata =
4380 from_timer(sdata, t, u.mgd.timer);
4382 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
4385 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
4386 u8 *bssid, u8 reason, bool tx)
4388 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4390 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
4393 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
4397 static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
4399 struct ieee80211_local *local = sdata->local;
4400 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4401 struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
4405 u16 prepare_tx_duration = 0;
4407 sdata_assert_lock(sdata);
4409 if (WARN_ON_ONCE(!auth_data))
4414 if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
4415 sdata_info(sdata, "authentication with %pM timed out\n",
4416 auth_data->bss->bssid);
4419 * Most likely AP is not in the range so remove the
4420 * bss struct for that AP.
4422 cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
4427 if (auth_data->algorithm == WLAN_AUTH_SAE)
4428 prepare_tx_duration =
4429 jiffies_to_msecs(IEEE80211_AUTH_TIMEOUT_SAE);
4431 drv_mgd_prepare_tx(local, sdata, prepare_tx_duration);
4433 sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
4434 auth_data->bss->bssid, auth_data->tries,
4435 IEEE80211_AUTH_MAX_TRIES);
4437 auth_data->expected_transaction = 2;
4439 if (auth_data->algorithm == WLAN_AUTH_SAE) {
4440 trans = auth_data->sae_trans;
4441 status = auth_data->sae_status;
4442 auth_data->expected_transaction = trans;
4445 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
4446 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
4447 IEEE80211_TX_INTFL_MLME_CONN_TX;
4449 ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
4450 auth_data->data, auth_data->data_len,
4451 auth_data->bss->bssid,
4452 auth_data->bss->bssid, NULL, 0, 0,
4455 if (tx_flags == 0) {
4456 if (auth_data->algorithm == WLAN_AUTH_SAE)
4457 auth_data->timeout = jiffies +
4458 IEEE80211_AUTH_TIMEOUT_SAE;
4460 auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
4462 auth_data->timeout =
4463 round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
4466 auth_data->timeout_started = true;
4467 run_again(sdata, auth_data->timeout);
4472 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
4474 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
4475 struct ieee80211_local *local = sdata->local;
4477 sdata_assert_lock(sdata);
4479 assoc_data->tries++;
4480 if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
4481 sdata_info(sdata, "association with %pM timed out\n",
4482 assoc_data->bss->bssid);
4485 * Most likely AP is not in the range so remove the
4486 * bss struct for that AP.
4488 cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss);
4493 sdata_info(sdata, "associate with %pM (try %d/%d)\n",
4494 assoc_data->bss->bssid, assoc_data->tries,
4495 IEEE80211_ASSOC_MAX_TRIES);
4496 ieee80211_send_assoc(sdata);
4498 if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
4499 assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
4500 assoc_data->timeout_started = true;
4501 run_again(sdata, assoc_data->timeout);
4503 assoc_data->timeout =
4504 round_jiffies_up(jiffies +
4505 IEEE80211_ASSOC_TIMEOUT_LONG);
4506 assoc_data->timeout_started = true;
4507 run_again(sdata, assoc_data->timeout);
4513 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
4514 __le16 fc, bool acked)
4516 struct ieee80211_local *local = sdata->local;
4518 sdata->u.mgd.status_fc = fc;
4519 sdata->u.mgd.status_acked = acked;
4520 sdata->u.mgd.status_received = true;
4522 ieee80211_queue_work(&local->hw, &sdata->work);
4525 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
4527 struct ieee80211_local *local = sdata->local;
4528 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4532 if (ifmgd->status_received) {
4533 __le16 fc = ifmgd->status_fc;
4534 bool status_acked = ifmgd->status_acked;
4536 ifmgd->status_received = false;
4537 if (ifmgd->auth_data && ieee80211_is_auth(fc)) {
4539 if (ifmgd->auth_data->algorithm ==
4541 ifmgd->auth_data->timeout =
4543 IEEE80211_AUTH_TIMEOUT_SAE;
4545 ifmgd->auth_data->timeout =
4547 IEEE80211_AUTH_TIMEOUT_SHORT;
4548 run_again(sdata, ifmgd->auth_data->timeout);
4550 ifmgd->auth_data->timeout = jiffies - 1;
4552 ifmgd->auth_data->timeout_started = true;
4553 } else if (ifmgd->assoc_data &&
4554 (ieee80211_is_assoc_req(fc) ||
4555 ieee80211_is_reassoc_req(fc))) {
4557 ifmgd->assoc_data->timeout =
4558 jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
4559 run_again(sdata, ifmgd->assoc_data->timeout);
4561 ifmgd->assoc_data->timeout = jiffies - 1;
4563 ifmgd->assoc_data->timeout_started = true;
4567 if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
4568 time_after(jiffies, ifmgd->auth_data->timeout)) {
4569 if (ifmgd->auth_data->done) {
4571 * ok ... we waited for assoc but userspace didn't,
4572 * so let's just kill the auth data
4574 ieee80211_destroy_auth_data(sdata, false);
4575 } else if (ieee80211_auth(sdata)) {
4577 struct ieee80211_event event = {
4579 .u.mlme.data = AUTH_EVENT,
4580 .u.mlme.status = MLME_TIMEOUT,
4583 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
4585 ieee80211_destroy_auth_data(sdata, false);
4587 cfg80211_auth_timeout(sdata->dev, bssid);
4588 drv_event_callback(sdata->local, sdata, &event);
4590 } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
4591 run_again(sdata, ifmgd->auth_data->timeout);
4593 if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
4594 time_after(jiffies, ifmgd->assoc_data->timeout)) {
4595 if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
4596 ieee80211_do_assoc(sdata)) {
4597 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
4598 struct ieee80211_event event = {
4600 .u.mlme.data = ASSOC_EVENT,
4601 .u.mlme.status = MLME_TIMEOUT,
4604 ieee80211_destroy_assoc_data(sdata, false, false);
4605 cfg80211_assoc_timeout(sdata->dev, bss);
4606 drv_event_callback(sdata->local, sdata, &event);
4608 } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
4609 run_again(sdata, ifmgd->assoc_data->timeout);
4611 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
4612 ifmgd->associated) {
4616 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
4618 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
4619 max_tries = max_nullfunc_tries;
4621 max_tries = max_probe_tries;
4623 /* ACK received for nullfunc probing frame */
4624 if (!ifmgd->probe_send_count)
4625 ieee80211_reset_ap_probe(sdata);
4626 else if (ifmgd->nullfunc_failed) {
4627 if (ifmgd->probe_send_count < max_tries) {
4629 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
4630 bssid, ifmgd->probe_send_count,
4632 ieee80211_mgd_probe_ap_send(sdata);
4635 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
4637 ieee80211_sta_connection_lost(sdata, bssid,
4638 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
4641 } else if (time_is_after_jiffies(ifmgd->probe_timeout))
4642 run_again(sdata, ifmgd->probe_timeout);
4643 else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
4645 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
4646 bssid, probe_wait_ms);
4647 ieee80211_sta_connection_lost(sdata, bssid,
4648 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
4649 } else if (ifmgd->probe_send_count < max_tries) {
4651 "No probe response from AP %pM after %dms, try %d/%i\n",
4652 bssid, probe_wait_ms,
4653 ifmgd->probe_send_count, max_tries);
4654 ieee80211_mgd_probe_ap_send(sdata);
4657 * We actually lost the connection ... or did we?
4661 "No probe response from AP %pM after %dms, disconnecting.\n",
4662 bssid, probe_wait_ms);
4664 ieee80211_sta_connection_lost(sdata, bssid,
4665 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
4669 sdata_unlock(sdata);
4672 static void ieee80211_sta_bcn_mon_timer(struct timer_list *t)
4674 struct ieee80211_sub_if_data *sdata =
4675 from_timer(sdata, t, u.mgd.bcn_mon_timer);
4676 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4678 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
4681 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
4684 sdata->u.mgd.connection_loss = false;
4685 ieee80211_queue_work(&sdata->local->hw,
4686 &sdata->u.mgd.beacon_connection_loss_work);
4689 static void ieee80211_sta_conn_mon_timer(struct timer_list *t)
4691 struct ieee80211_sub_if_data *sdata =
4692 from_timer(sdata, t, u.mgd.conn_mon_timer);
4693 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4694 struct ieee80211_local *local = sdata->local;
4695 struct sta_info *sta;
4696 unsigned long timeout;
4698 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
4701 sta = sta_info_get(sdata, ifmgd->bssid);
4705 timeout = sta->status_stats.last_ack;
4706 if (time_before(sta->status_stats.last_ack, sta->rx_stats.last_rx))
4707 timeout = sta->rx_stats.last_rx;
4708 timeout += IEEE80211_CONNECTION_IDLE_TIME;
4710 /* If timeout is after now, then update timer to fire at
4711 * the later date, but do not actually probe at this time.
4713 if (time_is_after_jiffies(timeout)) {
4714 mod_timer(&ifmgd->conn_mon_timer, round_jiffies_up(timeout));
4718 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
4721 static void ieee80211_sta_monitor_work(struct work_struct *work)
4723 struct ieee80211_sub_if_data *sdata =
4724 container_of(work, struct ieee80211_sub_if_data,
4725 u.mgd.monitor_work);
4727 ieee80211_mgd_probe_ap(sdata, false);
4730 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
4732 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
4733 __ieee80211_stop_poll(sdata);
4735 /* let's probe the connection once */
4736 if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
4737 ieee80211_queue_work(&sdata->local->hw,
4738 &sdata->u.mgd.monitor_work);
4743 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
4745 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4746 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4750 if (ifmgd->auth_data || ifmgd->assoc_data) {
4751 const u8 *bssid = ifmgd->auth_data ?
4752 ifmgd->auth_data->bss->bssid :
4753 ifmgd->assoc_data->bss->bssid;
4756 * If we are trying to authenticate / associate while suspending,
4757 * cfg80211 won't know and won't actually abort those attempts,
4758 * thus we need to do that ourselves.
4760 ieee80211_send_deauth_disassoc(sdata, bssid, bssid,
4761 IEEE80211_STYPE_DEAUTH,
4762 WLAN_REASON_DEAUTH_LEAVING,
4764 if (ifmgd->assoc_data)
4765 ieee80211_destroy_assoc_data(sdata, false, true);
4766 if (ifmgd->auth_data)
4767 ieee80211_destroy_auth_data(sdata, false);
4768 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4769 IEEE80211_DEAUTH_FRAME_LEN,
4773 /* This is a bit of a hack - we should find a better and more generic
4774 * solution to this. Normally when suspending, cfg80211 will in fact
4775 * deauthenticate. However, it doesn't (and cannot) stop an ongoing
4776 * auth (not so important) or assoc (this is the problem) process.
4778 * As a consequence, it can happen that we are in the process of both
4779 * associating and suspending, and receive an association response
4780 * after cfg80211 has checked if it needs to disconnect, but before
4781 * we actually set the flag to drop incoming frames. This will then
4782 * cause the workqueue flush to process the association response in
4783 * the suspend, resulting in a successful association just before it
4784 * tries to remove the interface from the driver, which now though
4785 * has a channel context assigned ... this results in issues.
4787 * To work around this (for now) simply deauth here again if we're
4790 if (ifmgd->associated && !sdata->local->wowlan) {
4792 struct cfg80211_deauth_request req = {
4793 .reason_code = WLAN_REASON_DEAUTH_LEAVING,
4797 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
4798 ieee80211_mgd_deauth(sdata, &req);
4801 sdata_unlock(sdata);
4804 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
4806 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4809 if (!ifmgd->associated) {
4810 sdata_unlock(sdata);
4814 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
4815 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
4816 mlme_dbg(sdata, "driver requested disconnect after resume\n");
4817 ieee80211_sta_connection_lost(sdata,
4818 ifmgd->associated->bssid,
4819 WLAN_REASON_UNSPECIFIED,
4821 sdata_unlock(sdata);
4824 sdata_unlock(sdata);
4828 /* interface setup */
4829 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
4831 struct ieee80211_if_managed *ifmgd;
4833 ifmgd = &sdata->u.mgd;
4834 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
4835 INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
4836 INIT_WORK(&ifmgd->beacon_connection_loss_work,
4837 ieee80211_beacon_connection_loss_work);
4838 INIT_WORK(&ifmgd->csa_connection_drop_work,
4839 ieee80211_csa_connection_drop_work);
4840 INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work);
4841 INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
4842 ieee80211_tdls_peer_del_work);
4843 timer_setup(&ifmgd->timer, ieee80211_sta_timer, 0);
4844 timer_setup(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, 0);
4845 timer_setup(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, 0);
4846 timer_setup(&ifmgd->chswitch_timer, ieee80211_chswitch_timer, 0);
4847 INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk,
4848 ieee80211_sta_handle_tspec_ac_params_wk);
4851 ifmgd->powersave = sdata->wdev.ps;
4852 ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
4853 ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
4854 ifmgd->p2p_noa_index = -1;
4856 if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
4857 ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
4859 ifmgd->req_smps = IEEE80211_SMPS_OFF;
4861 /* Setup TDLS data */
4862 spin_lock_init(&ifmgd->teardown_lock);
4863 ifmgd->teardown_skb = NULL;
4864 ifmgd->orig_teardown_skb = NULL;
4867 /* scan finished notification */
4868 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
4870 struct ieee80211_sub_if_data *sdata;
4872 /* Restart STA timers */
4874 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
4875 if (ieee80211_sdata_running(sdata))
4876 ieee80211_restart_sta_timer(sdata);
4881 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
4882 struct cfg80211_bss *cbss)
4884 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4885 const u8 *ht_cap_ie, *vht_cap_ie;
4886 const struct ieee80211_ht_cap *ht_cap;
4887 const struct ieee80211_vht_cap *vht_cap;
4890 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT)
4893 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4894 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) {
4895 ht_cap = (void *)(ht_cap_ie + 2);
4896 chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
4898 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
4899 * "Tx Unequal Modulation Supported" fields.
4903 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
4906 vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4907 if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) {
4911 vht_cap = (void *)(vht_cap_ie + 2);
4912 tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
4913 for (nss = 8; nss > 0; nss--) {
4914 if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
4915 IEEE80211_VHT_MCS_NOT_SUPPORTED)
4918 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
4919 chains = max(chains, nss);
4926 ieee80211_verify_sta_he_mcs_support(struct ieee80211_supported_band *sband,
4927 const struct ieee80211_he_operation *he_op)
4929 const struct ieee80211_sta_he_cap *sta_he_cap =
4930 ieee80211_get_he_sta_cap(sband);
4934 if (!sta_he_cap || !he_op)
4937 ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set);
4939 /* Need to go over for 80MHz, 160MHz and for 80+80 */
4940 for (i = 0; i < 3; i++) {
4941 const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp =
4942 &sta_he_cap->he_mcs_nss_supp;
4943 u16 sta_mcs_map_rx =
4944 le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]);
4945 u16 sta_mcs_map_tx =
4946 le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]);
4948 bool verified = true;
4951 * For each band there is a maximum of 8 spatial streams
4952 * possible. Each of the sta_mcs_map_* is a 16-bit struct built
4953 * of 2 bits per NSS (1-8), with the values defined in enum
4954 * ieee80211_he_mcs_support. Need to make sure STA TX and RX
4955 * capabilities aren't less than the AP's minimum requirements
4956 * for this HE BSS per SS.
4957 * It is enough to find one such band that meets the reqs.
4959 for (nss = 8; nss > 0; nss--) {
4960 u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3;
4961 u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3;
4962 u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3;
4964 if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED)
4968 * Make sure the HE AP doesn't require MCSs that aren't
4969 * supported by the client
4971 if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4972 sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4973 (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) {
4983 /* If here, STA doesn't meet AP's HE min requirements */
4987 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
4988 struct cfg80211_bss *cbss)
4990 struct ieee80211_local *local = sdata->local;
4991 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4992 const struct ieee80211_ht_cap *ht_cap = NULL;
4993 const struct ieee80211_ht_operation *ht_oper = NULL;
4994 const struct ieee80211_vht_operation *vht_oper = NULL;
4995 const struct ieee80211_he_operation *he_oper = NULL;
4996 const struct ieee80211_s1g_oper_ie *s1g_oper = NULL;
4997 struct ieee80211_supported_band *sband;
4998 struct cfg80211_chan_def chandef;
4999 bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
5000 bool is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ;
5001 struct ieee80211_bss *bss = (void *)cbss->priv;
5006 sband = local->hw.wiphy->bands[cbss->channel->band];
5008 ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ |
5009 IEEE80211_STA_DISABLE_80P80MHZ |
5010 IEEE80211_STA_DISABLE_160MHZ);
5012 /* disable HT/VHT/HE if we don't support them */
5013 if (!sband->ht_cap.ht_supported && !is_6ghz) {
5014 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5015 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5016 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5019 if (!sband->vht_cap.vht_supported && is_5ghz) {
5020 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5021 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5024 if (!ieee80211_get_he_sta_cap(sband))
5025 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5029 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && !is_6ghz) {
5030 const u8 *ht_oper_ie, *ht_cap_ie;
5032 ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
5033 if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper))
5034 ht_oper = (void *)(ht_oper_ie + 2);
5036 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
5037 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap))
5038 ht_cap = (void *)(ht_cap_ie + 2);
5041 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5046 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && !is_6ghz) {
5047 const u8 *vht_oper_ie, *vht_cap;
5049 vht_oper_ie = ieee80211_bss_get_ie(cbss,
5050 WLAN_EID_VHT_OPERATION);
5051 if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper))
5052 vht_oper = (void *)(vht_oper_ie + 2);
5053 if (vht_oper && !ht_oper) {
5056 "AP advertised VHT without HT, disabling HT/VHT/HE\n");
5057 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5058 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5059 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5062 vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
5063 if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) {
5064 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5069 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) {
5070 const struct cfg80211_bss_ies *ies;
5071 const u8 *he_oper_ie;
5073 ies = rcu_dereference(cbss->ies);
5074 he_oper_ie = cfg80211_find_ext_ie(WLAN_EID_EXT_HE_OPERATION,
5075 ies->data, ies->len);
5077 he_oper_ie[1] >= ieee80211_he_oper_size(&he_oper_ie[3]))
5078 he_oper = (void *)(he_oper_ie + 3);
5082 if (!ieee80211_verify_sta_he_mcs_support(sband, he_oper))
5083 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5086 /* Allow VHT if at least one channel on the sband supports 80 MHz */
5088 for (i = 0; i < sband->n_channels; i++) {
5089 if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
5090 IEEE80211_CHAN_NO_80MHZ))
5098 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5100 if (sband->band == NL80211_BAND_S1GHZ) {
5101 const u8 *s1g_oper_ie;
5103 s1g_oper_ie = ieee80211_bss_get_ie(cbss,
5104 WLAN_EID_S1G_OPERATION);
5105 if (s1g_oper_ie && s1g_oper_ie[1] >= sizeof(*s1g_oper))
5106 s1g_oper = (void *)(s1g_oper_ie + 2);
5109 "AP missing S1G operation element?\n");
5112 ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
5115 ht_oper, vht_oper, he_oper,
5119 sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
5124 if (ifmgd->flags & IEEE80211_STA_DISABLE_HE && is_6ghz) {
5125 sdata_info(sdata, "Rejecting non-HE 6/7 GHz connection");
5129 /* will change later if needed */
5130 sdata->smps_mode = IEEE80211_SMPS_OFF;
5132 mutex_lock(&local->mtx);
5134 * If this fails (possibly due to channel context sharing
5135 * on incompatible channels, e.g. 80+80 and 160 sharing the
5136 * same control channel) try to use a smaller bandwidth.
5138 ret = ieee80211_vif_use_channel(sdata, &chandef,
5139 IEEE80211_CHANCTX_SHARED);
5141 /* don't downgrade for 5 and 10 MHz channels, though. */
5142 if (chandef.width == NL80211_CHAN_WIDTH_5 ||
5143 chandef.width == NL80211_CHAN_WIDTH_10)
5146 while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
5147 ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
5148 ret = ieee80211_vif_use_channel(sdata, &chandef,
5149 IEEE80211_CHANCTX_SHARED);
5152 mutex_unlock(&local->mtx);
5156 static bool ieee80211_get_dtim(const struct cfg80211_bss_ies *ies,
5157 u8 *dtim_count, u8 *dtim_period)
5159 const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len);
5160 const u8 *idx_ie = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, ies->data,
5162 const struct ieee80211_tim_ie *tim = NULL;
5163 const struct ieee80211_bssid_index *idx;
5164 bool valid = tim_ie && tim_ie[1] >= 2;
5167 tim = (void *)(tim_ie + 2);
5170 *dtim_count = valid ? tim->dtim_count : 0;
5173 *dtim_period = valid ? tim->dtim_period : 0;
5175 /* Check if value is overridden by non-transmitted profile */
5176 if (!idx_ie || idx_ie[1] < 3)
5179 idx = (void *)(idx_ie + 2);
5182 *dtim_count = idx->dtim_count;
5185 *dtim_period = idx->dtim_period;
5190 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
5191 struct cfg80211_bss *cbss, bool assoc,
5194 struct ieee80211_local *local = sdata->local;
5195 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5196 struct ieee80211_bss *bss = (void *)cbss->priv;
5197 struct sta_info *new_sta = NULL;
5198 struct ieee80211_supported_band *sband;
5199 bool have_sta = false;
5202 sband = local->hw.wiphy->bands[cbss->channel->band];
5204 if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
5207 /* If a reconfig is happening, bail out */
5208 if (local->in_reconfig)
5213 have_sta = sta_info_get(sdata, cbss->bssid);
5218 new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
5224 * Set up the information for the new channel before setting the
5225 * new channel. We can't - completely race-free - change the basic
5226 * rates bitmap and the channel (sband) that it refers to, but if
5227 * we set it up before we at least avoid calling into the driver's
5228 * bss_info_changed() method with invalid information (since we do
5229 * call that from changing the channel - only for IDLE and perhaps
5230 * some others, but ...).
5232 * So to avoid that, just set up all the new information before the
5233 * channel, but tell the driver to apply it only afterwards, since
5234 * it might need the new channel for that.
5237 u32 rates = 0, basic_rates = 0;
5238 bool have_higher_than_11mbit;
5239 int min_rate = INT_MAX, min_rate_index = -1;
5240 const struct cfg80211_bss_ies *ies;
5241 int shift = ieee80211_vif_get_shift(&sdata->vif);
5243 /* TODO: S1G Basic Rate Set is expressed elsewhere */
5244 if (cbss->channel->band == NL80211_BAND_S1GHZ) {
5245 ieee80211_s1g_sta_rate_init(new_sta);
5249 ieee80211_get_rates(sband, bss->supp_rates,
5250 bss->supp_rates_len,
5251 &rates, &basic_rates,
5252 &have_higher_than_11mbit,
5253 &min_rate, &min_rate_index,
5257 * This used to be a workaround for basic rates missing
5258 * in the association response frame. Now that we no
5259 * longer use the basic rates from there, it probably
5260 * doesn't happen any more, but keep the workaround so
5261 * in case some *other* APs are buggy in different ways
5262 * we can connect -- with a warning.
5263 * Allow this workaround only in case the AP provided at least
5266 if (min_rate_index < 0) {
5268 "No legacy rates in association response\n");
5270 sta_info_free(local, new_sta);
5272 } else if (!basic_rates) {
5274 "No basic rates, using min rate instead\n");
5275 basic_rates = BIT(min_rate_index);
5279 new_sta->sta.supp_rates[cbss->channel->band] = rates;
5282 "No rates found, keeping mandatory only\n");
5284 sdata->vif.bss_conf.basic_rates = basic_rates;
5286 /* cf. IEEE 802.11 9.2.12 */
5287 if (cbss->channel->band == NL80211_BAND_2GHZ &&
5288 have_higher_than_11mbit)
5289 sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
5291 sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
5294 memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
5296 /* set timing information */
5297 sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
5299 ies = rcu_dereference(cbss->beacon_ies);
5301 sdata->vif.bss_conf.sync_tsf = ies->tsf;
5302 sdata->vif.bss_conf.sync_device_ts =
5303 bss->device_ts_beacon;
5305 ieee80211_get_dtim(ies,
5306 &sdata->vif.bss_conf.sync_dtim_count,
5308 } else if (!ieee80211_hw_check(&sdata->local->hw,
5309 TIMING_BEACON_ONLY)) {
5310 ies = rcu_dereference(cbss->proberesp_ies);
5311 /* must be non-NULL since beacon IEs were NULL */
5312 sdata->vif.bss_conf.sync_tsf = ies->tsf;
5313 sdata->vif.bss_conf.sync_device_ts =
5314 bss->device_ts_presp;
5315 sdata->vif.bss_conf.sync_dtim_count = 0;
5317 sdata->vif.bss_conf.sync_tsf = 0;
5318 sdata->vif.bss_conf.sync_device_ts = 0;
5319 sdata->vif.bss_conf.sync_dtim_count = 0;
5324 if (new_sta || override) {
5325 err = ieee80211_prep_channel(sdata, cbss);
5328 sta_info_free(local, new_sta);
5335 * tell driver about BSSID, basic rates and timing
5336 * this was set up above, before setting the channel
5338 ieee80211_bss_info_change_notify(sdata,
5339 BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES |
5340 BSS_CHANGED_BEACON_INT);
5343 sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
5345 err = sta_info_insert(new_sta);
5349 "failed to insert STA entry for the AP (error %d)\n",
5354 WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid));
5356 /* Cancel scan to ensure that nothing interferes with connection */
5357 if (local->scanning)
5358 ieee80211_scan_cancel(local);
5364 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
5365 struct cfg80211_auth_request *req)
5367 struct ieee80211_local *local = sdata->local;
5368 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5369 struct ieee80211_mgd_auth_data *auth_data;
5374 /* prepare auth data structure */
5376 switch (req->auth_type) {
5377 case NL80211_AUTHTYPE_OPEN_SYSTEM:
5378 auth_alg = WLAN_AUTH_OPEN;
5380 case NL80211_AUTHTYPE_SHARED_KEY:
5383 auth_alg = WLAN_AUTH_SHARED_KEY;
5385 case NL80211_AUTHTYPE_FT:
5386 auth_alg = WLAN_AUTH_FT;
5388 case NL80211_AUTHTYPE_NETWORK_EAP:
5389 auth_alg = WLAN_AUTH_LEAP;
5391 case NL80211_AUTHTYPE_SAE:
5392 auth_alg = WLAN_AUTH_SAE;
5394 case NL80211_AUTHTYPE_FILS_SK:
5395 auth_alg = WLAN_AUTH_FILS_SK;
5397 case NL80211_AUTHTYPE_FILS_SK_PFS:
5398 auth_alg = WLAN_AUTH_FILS_SK_PFS;
5400 case NL80211_AUTHTYPE_FILS_PK:
5401 auth_alg = WLAN_AUTH_FILS_PK;
5407 if (ifmgd->assoc_data)
5410 auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len +
5411 req->ie_len, GFP_KERNEL);
5415 auth_data->bss = req->bss;
5417 if (req->auth_data_len >= 4) {
5418 if (req->auth_type == NL80211_AUTHTYPE_SAE) {
5419 __le16 *pos = (__le16 *) req->auth_data;
5421 auth_data->sae_trans = le16_to_cpu(pos[0]);
5422 auth_data->sae_status = le16_to_cpu(pos[1]);
5424 memcpy(auth_data->data, req->auth_data + 4,
5425 req->auth_data_len - 4);
5426 auth_data->data_len += req->auth_data_len - 4;
5429 /* Check if continuing authentication or trying to authenticate with the
5430 * same BSS that we were in the process of authenticating with and avoid
5431 * removal and re-addition of the STA entry in
5432 * ieee80211_prep_connection().
5434 cont_auth = ifmgd->auth_data && req->bss == ifmgd->auth_data->bss;
5436 if (req->ie && req->ie_len) {
5437 memcpy(&auth_data->data[auth_data->data_len],
5438 req->ie, req->ie_len);
5439 auth_data->data_len += req->ie_len;
5442 if (req->key && req->key_len) {
5443 auth_data->key_len = req->key_len;
5444 auth_data->key_idx = req->key_idx;
5445 memcpy(auth_data->key, req->key, req->key_len);
5448 auth_data->algorithm = auth_alg;
5450 /* try to authenticate/probe */
5452 if (ifmgd->auth_data) {
5453 if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE) {
5454 auth_data->peer_confirmed =
5455 ifmgd->auth_data->peer_confirmed;
5457 ieee80211_destroy_auth_data(sdata, cont_auth);
5460 /* prep auth_data so we don't go into idle on disassoc */
5461 ifmgd->auth_data = auth_data;
5463 /* If this is continuation of an ongoing SAE authentication exchange
5464 * (i.e., request to send SAE Confirm) and the peer has already
5465 * confirmed, mark authentication completed since we are about to send
5468 if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE &&
5469 auth_data->peer_confirmed && auth_data->sae_trans == 2)
5470 ieee80211_mark_sta_auth(sdata, req->bss->bssid);
5472 if (ifmgd->associated) {
5473 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5476 "disconnect from AP %pM for new auth to %pM\n",
5477 ifmgd->associated->bssid, req->bss->bssid);
5478 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
5479 WLAN_REASON_UNSPECIFIED,
5482 ieee80211_report_disconnect(sdata, frame_buf,
5483 sizeof(frame_buf), true,
5484 WLAN_REASON_UNSPECIFIED,
5488 sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
5490 err = ieee80211_prep_connection(sdata, req->bss, cont_auth, false);
5494 err = ieee80211_auth(sdata);
5496 sta_info_destroy_addr(sdata, req->bss->bssid);
5500 /* hold our own reference */
5501 cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
5505 eth_zero_addr(ifmgd->bssid);
5506 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
5507 ifmgd->auth_data = NULL;
5508 mutex_lock(&sdata->local->mtx);
5509 ieee80211_vif_release_channel(sdata);
5510 mutex_unlock(&sdata->local->mtx);
5515 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
5516 struct cfg80211_assoc_request *req)
5518 bool is_6ghz = req->bss->channel->band == NL80211_BAND_6GHZ;
5519 bool is_5ghz = req->bss->channel->band == NL80211_BAND_5GHZ;
5520 struct ieee80211_local *local = sdata->local;
5521 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5522 struct ieee80211_bss *bss = (void *)req->bss->priv;
5523 struct ieee80211_mgd_assoc_data *assoc_data;
5524 const struct cfg80211_bss_ies *beacon_ies;
5525 struct ieee80211_supported_band *sband;
5526 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
5527 const u8 *ssidie, *ht_ie, *vht_ie;
5529 bool override = false;
5531 assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL);
5536 ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
5537 if (!ssidie || ssidie[1] > sizeof(assoc_data->ssid)) {
5542 memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]);
5543 assoc_data->ssid_len = ssidie[1];
5544 memcpy(bss_conf->ssid, assoc_data->ssid, assoc_data->ssid_len);
5545 bss_conf->ssid_len = assoc_data->ssid_len;
5548 if (ifmgd->associated) {
5549 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5552 "disconnect from AP %pM for new assoc to %pM\n",
5553 ifmgd->associated->bssid, req->bss->bssid);
5554 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
5555 WLAN_REASON_UNSPECIFIED,
5558 ieee80211_report_disconnect(sdata, frame_buf,
5559 sizeof(frame_buf), true,
5560 WLAN_REASON_UNSPECIFIED,
5564 if (ifmgd->auth_data && !ifmgd->auth_data->done) {
5569 if (ifmgd->assoc_data) {
5574 if (ifmgd->auth_data) {
5577 /* keep sta info, bssid if matching */
5578 match = ether_addr_equal(ifmgd->bssid, req->bss->bssid);
5579 ieee80211_destroy_auth_data(sdata, match);
5582 /* prepare assoc data */
5584 ifmgd->beacon_crc_valid = false;
5586 assoc_data->wmm = bss->wmm_used &&
5587 (local->hw.queues >= IEEE80211_NUM_ACS);
5590 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
5591 * We still associate in non-HT mode (11a/b/g) if any one of these
5592 * ciphers is configured as pairwise.
5593 * We can set this to true for non-11n hardware, that'll be checked
5594 * separately along with the peer capabilities.
5596 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
5597 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
5598 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
5599 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
5600 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5601 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5602 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5603 netdev_info(sdata->dev,
5604 "disabling HT/VHT/HE due to WEP/TKIP use\n");
5608 sband = local->hw.wiphy->bands[req->bss->channel->band];
5610 /* also disable HT/VHT/HE if the AP doesn't use WMM */
5611 if (!bss->wmm_used) {
5612 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5613 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5614 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5615 netdev_info(sdata->dev,
5616 "disabling HT/VHT/HE as WMM/QoS is not supported by the AP\n");
5619 memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
5620 memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
5621 sizeof(ifmgd->ht_capa_mask));
5623 memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
5624 memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
5625 sizeof(ifmgd->vht_capa_mask));
5627 memcpy(&ifmgd->s1g_capa, &req->s1g_capa, sizeof(ifmgd->s1g_capa));
5628 memcpy(&ifmgd->s1g_capa_mask, &req->s1g_capa_mask,
5629 sizeof(ifmgd->s1g_capa_mask));
5631 if (req->ie && req->ie_len) {
5632 memcpy(assoc_data->ie, req->ie, req->ie_len);
5633 assoc_data->ie_len = req->ie_len;
5636 if (req->fils_kek) {
5637 /* should already be checked in cfg80211 - so warn */
5638 if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) {
5642 memcpy(assoc_data->fils_kek, req->fils_kek,
5644 assoc_data->fils_kek_len = req->fils_kek_len;
5647 if (req->fils_nonces)
5648 memcpy(assoc_data->fils_nonces, req->fils_nonces,
5649 2 * FILS_NONCE_LEN);
5651 assoc_data->bss = req->bss;
5653 if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
5654 if (ifmgd->powersave)
5655 sdata->smps_mode = IEEE80211_SMPS_DYNAMIC;
5657 sdata->smps_mode = IEEE80211_SMPS_OFF;
5659 sdata->smps_mode = ifmgd->req_smps;
5661 assoc_data->capability = req->bss->capability;
5662 assoc_data->supp_rates = bss->supp_rates;
5663 assoc_data->supp_rates_len = bss->supp_rates_len;
5666 ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION);
5667 if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation))
5668 assoc_data->ap_ht_param =
5669 ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
5671 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5672 vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
5673 if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
5674 memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
5675 sizeof(struct ieee80211_vht_cap));
5677 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT |
5678 IEEE80211_STA_DISABLE_HE;
5681 if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
5682 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK),
5683 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
5684 sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
5686 if (bss->wmm_used && bss->uapsd_supported &&
5687 (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) {
5688 assoc_data->uapsd = true;
5689 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
5691 assoc_data->uapsd = false;
5692 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
5695 if (req->prev_bssid)
5696 memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN);
5699 ifmgd->mfp = IEEE80211_MFP_REQUIRED;
5700 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
5702 ifmgd->mfp = IEEE80211_MFP_DISABLED;
5703 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
5706 if (req->flags & ASSOC_REQ_USE_RRM)
5707 ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
5709 ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
5711 if (req->crypto.control_port)
5712 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
5714 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
5716 sdata->control_port_protocol = req->crypto.control_port_ethertype;
5717 sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
5718 sdata->control_port_over_nl80211 =
5719 req->crypto.control_port_over_nl80211;
5720 sdata->control_port_no_preauth = req->crypto.control_port_no_preauth;
5721 sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
5724 /* kick off associate process */
5726 ifmgd->assoc_data = assoc_data;
5727 ifmgd->dtim_period = 0;
5728 ifmgd->have_beacon = false;
5730 /* override HT/VHT configuration only if the AP and we support it */
5731 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
5732 struct ieee80211_sta_ht_cap sta_ht_cap;
5734 if (req->flags & ASSOC_REQ_DISABLE_HT)
5737 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
5738 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
5740 /* check for 40 MHz disable override */
5741 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ) &&
5742 sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
5743 !(sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
5746 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
5747 req->flags & ASSOC_REQ_DISABLE_VHT)
5751 if (req->flags & ASSOC_REQ_DISABLE_HT) {
5752 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5753 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5754 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5757 if (req->flags & ASSOC_REQ_DISABLE_VHT)
5758 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5760 if (req->flags & ASSOC_REQ_DISABLE_HE)
5761 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5763 err = ieee80211_prep_connection(sdata, req->bss, true, override);
5768 beacon_ies = rcu_dereference(req->bss->beacon_ies);
5770 if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC) &&
5773 * Wait up to one beacon interval ...
5774 * should this be more if we miss one?
5776 sdata_info(sdata, "waiting for beacon from %pM\n",
5778 assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
5779 assoc_data->timeout_started = true;
5780 assoc_data->need_beacon = true;
5781 } else if (beacon_ies) {
5782 const struct element *elem;
5785 ieee80211_get_dtim(beacon_ies, &dtim_count,
5786 &ifmgd->dtim_period);
5788 ifmgd->have_beacon = true;
5789 assoc_data->timeout = jiffies;
5790 assoc_data->timeout_started = true;
5792 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
5793 sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
5794 sdata->vif.bss_conf.sync_device_ts =
5795 bss->device_ts_beacon;
5796 sdata->vif.bss_conf.sync_dtim_count = dtim_count;
5799 elem = cfg80211_find_ext_elem(WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION,
5800 beacon_ies->data, beacon_ies->len);
5801 if (elem && elem->datalen >= 3)
5802 sdata->vif.bss_conf.profile_periodicity = elem->data[2];
5804 elem = cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY,
5805 beacon_ies->data, beacon_ies->len);
5806 if (elem && elem->datalen >= 11 &&
5807 (elem->data[10] & WLAN_EXT_CAPA11_EMA_SUPPORT))
5808 sdata->vif.bss_conf.ema_ap = true;
5810 assoc_data->timeout = jiffies;
5811 assoc_data->timeout_started = true;
5815 run_again(sdata, assoc_data->timeout);
5817 if (bss->corrupt_data) {
5818 char *corrupt_type = "data";
5819 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
5820 if (bss->corrupt_data &
5821 IEEE80211_BSS_CORRUPT_PROBE_RESP)
5822 corrupt_type = "beacon and probe response";
5824 corrupt_type = "beacon";
5825 } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
5826 corrupt_type = "probe response";
5827 sdata_info(sdata, "associating with AP with corrupt %s\n",
5833 eth_zero_addr(ifmgd->bssid);
5834 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
5835 ifmgd->assoc_data = NULL;
5841 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
5842 struct cfg80211_deauth_request *req)
5844 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5845 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5846 bool tx = !req->local_state_change;
5848 if (ifmgd->auth_data &&
5849 ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) {
5851 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
5852 req->bssid, req->reason_code,
5853 ieee80211_get_reason_code_string(req->reason_code));
5855 drv_mgd_prepare_tx(sdata->local, sdata, 0);
5856 ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid,
5857 IEEE80211_STYPE_DEAUTH,
5858 req->reason_code, tx,
5860 ieee80211_destroy_auth_data(sdata, false);
5861 ieee80211_report_disconnect(sdata, frame_buf,
5862 sizeof(frame_buf), true,
5863 req->reason_code, false);
5868 if (ifmgd->assoc_data &&
5869 ether_addr_equal(ifmgd->assoc_data->bss->bssid, req->bssid)) {
5871 "aborting association with %pM by local choice (Reason: %u=%s)\n",
5872 req->bssid, req->reason_code,
5873 ieee80211_get_reason_code_string(req->reason_code));
5875 drv_mgd_prepare_tx(sdata->local, sdata, 0);
5876 ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid,
5877 IEEE80211_STYPE_DEAUTH,
5878 req->reason_code, tx,
5880 ieee80211_destroy_assoc_data(sdata, false, true);
5881 ieee80211_report_disconnect(sdata, frame_buf,
5882 sizeof(frame_buf), true,
5883 req->reason_code, false);
5887 if (ifmgd->associated &&
5888 ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
5890 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
5891 req->bssid, req->reason_code,
5892 ieee80211_get_reason_code_string(req->reason_code));
5894 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
5895 req->reason_code, tx, frame_buf);
5896 ieee80211_report_disconnect(sdata, frame_buf,
5897 sizeof(frame_buf), true,
5898 req->reason_code, false);
5905 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
5906 struct cfg80211_disassoc_request *req)
5908 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5910 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5913 * cfg80211 should catch this ... but it's racy since
5914 * we can receive a disassoc frame, process it, hand it
5915 * to cfg80211 while that's in a locked section already
5916 * trying to tell us that the user wants to disconnect.
5918 if (ifmgd->associated != req->bss)
5922 "disassociating from %pM by local choice (Reason: %u=%s)\n",
5923 req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code));
5925 memcpy(bssid, req->bss->bssid, ETH_ALEN);
5926 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
5927 req->reason_code, !req->local_state_change,
5930 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
5931 req->reason_code, false);
5936 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
5938 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5941 * Make sure some work items will not run after this,
5942 * they will not do anything but might not have been
5943 * cancelled when disconnecting.
5945 cancel_work_sync(&ifmgd->monitor_work);
5946 cancel_work_sync(&ifmgd->beacon_connection_loss_work);
5947 cancel_work_sync(&ifmgd->request_smps_work);
5948 cancel_work_sync(&ifmgd->csa_connection_drop_work);
5949 cancel_work_sync(&ifmgd->chswitch_work);
5950 cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
5953 if (ifmgd->assoc_data) {
5954 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
5955 ieee80211_destroy_assoc_data(sdata, false, false);
5956 cfg80211_assoc_timeout(sdata->dev, bss);
5958 if (ifmgd->auth_data)
5959 ieee80211_destroy_auth_data(sdata, false);
5960 spin_lock_bh(&ifmgd->teardown_lock);
5961 if (ifmgd->teardown_skb) {
5962 kfree_skb(ifmgd->teardown_skb);
5963 ifmgd->teardown_skb = NULL;
5964 ifmgd->orig_teardown_skb = NULL;
5966 kfree(ifmgd->assoc_req_ies);
5967 ifmgd->assoc_req_ies = NULL;
5968 ifmgd->assoc_req_ies_len = 0;
5969 spin_unlock_bh(&ifmgd->teardown_lock);
5970 del_timer_sync(&ifmgd->timer);
5971 sdata_unlock(sdata);
5974 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
5975 enum nl80211_cqm_rssi_threshold_event rssi_event,
5979 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5981 trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level);
5983 cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp);
5985 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
5987 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp)
5989 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5991 trace_api_cqm_beacon_loss_notify(sdata->local, sdata);
5993 cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp);
5995 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);