dbd9ad5f3992ca3b3331ec7ac667bc93830d1139
[linux-block.git] / net / mac80211 / agg-tx.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * HT handling
4  *
5  * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
6  * Copyright 2002-2005, Instant802 Networks, Inc.
7  * Copyright 2005-2006, Devicescape Software, Inc.
8  * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
9  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
10  * Copyright 2007-2010, Intel Corporation
11  * Copyright(c) 2015-2017 Intel Deutschland GmbH
12  * Copyright (C) 2018 - 2024 Intel Corporation
13  */
14
15 #include <linux/ieee80211.h>
16 #include <linux/slab.h>
17 #include <linux/export.h>
18 #include <net/mac80211.h>
19 #include "ieee80211_i.h"
20 #include "driver-ops.h"
21 #include "wme.h"
22
23 /**
24  * DOC: TX A-MPDU aggregation
25  *
26  * Aggregation on the TX side requires setting the hardware flag
27  * %IEEE80211_HW_AMPDU_AGGREGATION. The driver will then be handed
28  * packets with a flag indicating A-MPDU aggregation. The driver
29  * or device is responsible for actually aggregating the frames,
30  * as well as deciding how many and which to aggregate.
31  *
32  * When TX aggregation is started by some subsystem (usually the rate
33  * control algorithm would be appropriate) by calling the
34  * ieee80211_start_tx_ba_session() function, the driver will be
35  * notified via its @ampdu_action function, with the
36  * %IEEE80211_AMPDU_TX_START action.
37  *
38  * In response to that, the driver is later required to call the
39  * ieee80211_start_tx_ba_cb_irqsafe() function, which will really
40  * start the aggregation session after the peer has also responded.
41  * If the peer responds negatively, the session will be stopped
42  * again right away. Note that it is possible for the aggregation
43  * session to be stopped before the driver has indicated that it
44  * is done setting it up, in which case it must not indicate the
45  * setup completion.
46  *
47  * Also note that, since we also need to wait for a response from
48  * the peer, the driver is notified of the completion of the
49  * handshake by the %IEEE80211_AMPDU_TX_OPERATIONAL action to the
50  * @ampdu_action callback.
51  *
52  * Similarly, when the aggregation session is stopped by the peer
53  * or something calling ieee80211_stop_tx_ba_session(), the driver's
54  * @ampdu_action function will be called with the action
55  * %IEEE80211_AMPDU_TX_STOP. In this case, the call must not fail,
56  * and the driver must later call ieee80211_stop_tx_ba_cb_irqsafe().
57  * Note that the sta can get destroyed before the BA tear down is
58  * complete.
59  */
60
61 static void ieee80211_send_addba_request(struct sta_info *sta, u16 tid,
62                                          u8 dialog_token, u16 start_seq_num,
63                                          u16 agg_size, u16 timeout)
64 {
65         struct ieee80211_sub_if_data *sdata = sta->sdata;
66         struct ieee80211_local *local = sdata->local;
67         struct sk_buff *skb;
68         struct ieee80211_mgmt *mgmt;
69         u16 capab;
70
71         skb = dev_alloc_skb(sizeof(*mgmt) +
72                             2 + sizeof(struct ieee80211_addba_ext_ie) +
73                             local->hw.extra_tx_headroom);
74         if (!skb)
75                 return;
76
77         skb_reserve(skb, local->hw.extra_tx_headroom);
78         mgmt = ieee80211_mgmt_ba(skb, sta->sta.addr, sdata);
79
80         skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_req));
81
82         mgmt->u.action.category = WLAN_CATEGORY_BACK;
83         mgmt->u.action.u.addba_req.action_code = WLAN_ACTION_ADDBA_REQ;
84
85         mgmt->u.action.u.addba_req.dialog_token = dialog_token;
86         capab = IEEE80211_ADDBA_PARAM_AMSDU_MASK;
87         capab |= IEEE80211_ADDBA_PARAM_POLICY_MASK;
88         capab |= u16_encode_bits(tid, IEEE80211_ADDBA_PARAM_TID_MASK);
89         capab |= u16_encode_bits(agg_size, IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK);
90
91         mgmt->u.action.u.addba_req.capab = cpu_to_le16(capab);
92
93         mgmt->u.action.u.addba_req.timeout = cpu_to_le16(timeout);
94         mgmt->u.action.u.addba_req.start_seq_num =
95                                         cpu_to_le16(start_seq_num << 4);
96
97         if (sta->sta.deflink.he_cap.has_he)
98                 ieee80211_add_addbaext(skb, 0, agg_size);
99
100         ieee80211_tx_skb_tid(sdata, skb, tid, -1);
101 }
102
103 void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn)
104 {
105         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
106         struct ieee80211_local *local = sdata->local;
107         struct sk_buff *skb;
108         struct ieee80211_bar *bar;
109         u16 bar_control = 0;
110
111         skb = dev_alloc_skb(sizeof(*bar) + local->hw.extra_tx_headroom);
112         if (!skb)
113                 return;
114
115         skb_reserve(skb, local->hw.extra_tx_headroom);
116         bar = skb_put_zero(skb, sizeof(*bar));
117         bar->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL |
118                                          IEEE80211_STYPE_BACK_REQ);
119         memcpy(bar->ra, ra, ETH_ALEN);
120         memcpy(bar->ta, sdata->vif.addr, ETH_ALEN);
121         bar_control |= (u16)IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL;
122         bar_control |= (u16)IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA;
123         bar_control |= (u16)(tid << IEEE80211_BAR_CTRL_TID_INFO_SHIFT);
124         bar->control = cpu_to_le16(bar_control);
125         bar->start_seq_num = cpu_to_le16(ssn);
126
127         IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
128                                         IEEE80211_TX_CTL_REQ_TX_STATUS;
129         ieee80211_tx_skb_tid(sdata, skb, tid, -1);
130 }
131 EXPORT_SYMBOL(ieee80211_send_bar);
132
133 void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
134                              struct tid_ampdu_tx *tid_tx)
135 {
136         lockdep_assert_wiphy(sta->local->hw.wiphy);
137         lockdep_assert_held(&sta->lock);
138         rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
139 }
140
141 /*
142  * When multiple aggregation sessions on multiple stations
143  * are being created/destroyed simultaneously, we need to
144  * refcount the global queue stop caused by that in order
145  * to not get into a situation where one of the aggregation
146  * setup or teardown re-enables queues before the other is
147  * ready to handle that.
148  *
149  * These two functions take care of this issue by keeping
150  * a global "agg_queue_stop" refcount.
151  */
152 static void __acquires(agg_queue)
153 ieee80211_stop_queue_agg(struct ieee80211_sub_if_data *sdata, int tid)
154 {
155         int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
156
157         /* we do refcounting here, so don't use the queue reason refcounting */
158
159         if (atomic_inc_return(&sdata->local->agg_queue_stop[queue]) == 1)
160                 ieee80211_stop_queue_by_reason(
161                         &sdata->local->hw, queue,
162                         IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
163                         false);
164         __acquire(agg_queue);
165 }
166
167 static void __releases(agg_queue)
168 ieee80211_wake_queue_agg(struct ieee80211_sub_if_data *sdata, int tid)
169 {
170         int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
171
172         if (atomic_dec_return(&sdata->local->agg_queue_stop[queue]) == 0)
173                 ieee80211_wake_queue_by_reason(
174                         &sdata->local->hw, queue,
175                         IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
176                         false);
177         __release(agg_queue);
178 }
179
180 static void
181 ieee80211_agg_stop_txq(struct sta_info *sta, int tid)
182 {
183         struct ieee80211_txq *txq = sta->sta.txq[tid];
184         struct ieee80211_sub_if_data *sdata;
185         struct fq *fq;
186         struct txq_info *txqi;
187
188         if (!txq)
189                 return;
190
191         txqi = to_txq_info(txq);
192         sdata = vif_to_sdata(txq->vif);
193         fq = &sdata->local->fq;
194
195         /* Lock here to protect against further seqno updates on dequeue */
196         spin_lock_bh(&fq->lock);
197         set_bit(IEEE80211_TXQ_STOP, &txqi->flags);
198         spin_unlock_bh(&fq->lock);
199 }
200
201 static void
202 ieee80211_agg_start_txq(struct sta_info *sta, int tid, bool enable)
203 {
204         struct ieee80211_txq *txq = sta->sta.txq[tid];
205         struct txq_info *txqi;
206
207         lockdep_assert_wiphy(sta->local->hw.wiphy);
208
209         if (!txq)
210                 return;
211
212         txqi = to_txq_info(txq);
213
214         if (enable)
215                 set_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
216         else
217                 clear_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
218
219         clear_bit(IEEE80211_TXQ_STOP, &txqi->flags);
220         local_bh_disable();
221         rcu_read_lock();
222         schedule_and_wake_txq(sta->sdata->local, txqi);
223         rcu_read_unlock();
224         local_bh_enable();
225 }
226
227 /*
228  * splice packets from the STA's pending to the local pending,
229  * requires a call to ieee80211_agg_splice_finish later
230  */
231 static void __acquires(agg_queue)
232 ieee80211_agg_splice_packets(struct ieee80211_sub_if_data *sdata,
233                              struct tid_ampdu_tx *tid_tx, u16 tid)
234 {
235         struct ieee80211_local *local = sdata->local;
236         int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
237         unsigned long flags;
238
239         ieee80211_stop_queue_agg(sdata, tid);
240
241         if (WARN(!tid_tx,
242                  "TID %d gone but expected when splicing aggregates from the pending queue\n",
243                  tid))
244                 return;
245
246         if (!skb_queue_empty(&tid_tx->pending)) {
247                 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
248                 /* copy over remaining packets */
249                 skb_queue_splice_tail_init(&tid_tx->pending,
250                                            &local->pending[queue]);
251                 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
252         }
253 }
254
255 static void __releases(agg_queue)
256 ieee80211_agg_splice_finish(struct ieee80211_sub_if_data *sdata, u16 tid)
257 {
258         ieee80211_wake_queue_agg(sdata, tid);
259 }
260
261 static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid)
262 {
263         struct tid_ampdu_tx *tid_tx;
264
265         lockdep_assert_wiphy(sta->local->hw.wiphy);
266         lockdep_assert_held(&sta->lock);
267
268         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
269
270         /*
271          * When we get here, the TX path will not be lockless any more wrt.
272          * aggregation, since the OPERATIONAL bit has long been cleared.
273          * Thus it will block on getting the lock, if it occurs. So if we
274          * stop the queue now, we will not get any more packets, and any
275          * that might be being processed will wait for us here, thereby
276          * guaranteeing that no packets go to the tid_tx pending queue any
277          * more.
278          */
279
280         ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid);
281
282         /* future packets must not find the tid_tx struct any more */
283         ieee80211_assign_tid_tx(sta, tid, NULL);
284
285         ieee80211_agg_splice_finish(sta->sdata, tid);
286
287         kfree_rcu(tid_tx, rcu_head);
288 }
289
290 int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
291                                    enum ieee80211_agg_stop_reason reason)
292 {
293         struct ieee80211_local *local = sta->local;
294         struct tid_ampdu_tx *tid_tx;
295         struct ieee80211_ampdu_params params = {
296                 .sta = &sta->sta,
297                 .tid = tid,
298                 .buf_size = 0,
299                 .amsdu = false,
300                 .timeout = 0,
301                 .ssn = 0,
302         };
303         int ret;
304
305         lockdep_assert_wiphy(sta->local->hw.wiphy);
306
307         switch (reason) {
308         case AGG_STOP_DECLINED:
309         case AGG_STOP_LOCAL_REQUEST:
310         case AGG_STOP_PEER_REQUEST:
311                 params.action = IEEE80211_AMPDU_TX_STOP_CONT;
312                 break;
313         case AGG_STOP_DESTROY_STA:
314                 params.action = IEEE80211_AMPDU_TX_STOP_FLUSH;
315                 break;
316         default:
317                 WARN_ON_ONCE(1);
318                 return -EINVAL;
319         }
320
321         spin_lock_bh(&sta->lock);
322
323         /* free struct pending for start, if present */
324         tid_tx = sta->ampdu_mlme.tid_start_tx[tid];
325         kfree(tid_tx);
326         sta->ampdu_mlme.tid_start_tx[tid] = NULL;
327
328         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
329         if (!tid_tx) {
330                 spin_unlock_bh(&sta->lock);
331                 return -ENOENT;
332         }
333
334         /*
335          * if we're already stopping ignore any new requests to stop
336          * unless we're destroying it in which case notify the driver
337          */
338         if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
339                 spin_unlock_bh(&sta->lock);
340                 if (reason != AGG_STOP_DESTROY_STA)
341                         return -EALREADY;
342                 params.action = IEEE80211_AMPDU_TX_STOP_FLUSH_CONT;
343                 ret = drv_ampdu_action(local, sta->sdata, &params);
344                 WARN_ON_ONCE(ret);
345                 return 0;
346         }
347
348         if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
349                 /* not even started yet! */
350                 ieee80211_assign_tid_tx(sta, tid, NULL);
351                 spin_unlock_bh(&sta->lock);
352                 kfree_rcu(tid_tx, rcu_head);
353                 return 0;
354         }
355
356         set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
357
358         ieee80211_agg_stop_txq(sta, tid);
359
360         spin_unlock_bh(&sta->lock);
361
362         ht_dbg(sta->sdata, "Tx BA session stop requested for %pM tid %u\n",
363                sta->sta.addr, tid);
364
365         timer_delete_sync(&tid_tx->addba_resp_timer);
366         timer_delete_sync(&tid_tx->session_timer);
367
368         /*
369          * After this packets are no longer handed right through
370          * to the driver but are put onto tid_tx->pending instead,
371          * with locking to ensure proper access.
372          */
373         clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
374
375         /*
376          * There might be a few packets being processed right now (on
377          * another CPU) that have already gotten past the aggregation
378          * check when it was still OPERATIONAL and consequently have
379          * IEEE80211_TX_CTL_AMPDU set. In that case, this code might
380          * call into the driver at the same time or even before the
381          * TX paths calls into it, which could confuse the driver.
382          *
383          * Wait for all currently running TX paths to finish before
384          * telling the driver. New packets will not go through since
385          * the aggregation session is no longer OPERATIONAL.
386          */
387         if (!local->in_reconfig)
388                 synchronize_net();
389
390         tid_tx->stop_initiator = reason == AGG_STOP_PEER_REQUEST ?
391                                         WLAN_BACK_RECIPIENT :
392                                         WLAN_BACK_INITIATOR;
393         tid_tx->tx_stop = reason == AGG_STOP_LOCAL_REQUEST;
394
395         ret = drv_ampdu_action(local, sta->sdata, &params);
396
397         /* HW shall not deny going back to legacy */
398         if (WARN_ON(ret)) {
399                 /*
400                  * We may have pending packets get stuck in this case...
401                  * Not bothering with a workaround for now.
402                  */
403         }
404
405         /*
406          * In the case of AGG_STOP_DESTROY_STA, the driver won't
407          * necessarily call ieee80211_stop_tx_ba_cb(), so this may
408          * seem like we can leave the tid_tx data pending forever.
409          * This is true, in a way, but "forever" is only until the
410          * station struct is actually destroyed. In the meantime,
411          * leaving it around ensures that we don't transmit packets
412          * to the driver on this TID which might confuse it.
413          */
414
415         return 0;
416 }
417
418 /*
419  * After sending add Block Ack request we activated a timer until
420  * add Block Ack response will arrive from the recipient.
421  * If this timer expires sta_addba_resp_timer_expired will be executed.
422  */
423 static void sta_addba_resp_timer_expired(struct timer_list *t)
424 {
425         struct tid_ampdu_tx *tid_tx = timer_container_of(tid_tx, t,
426                                                          addba_resp_timer);
427         struct sta_info *sta = tid_tx->sta;
428         u8 tid = tid_tx->tid;
429
430         /* check if the TID waits for addBA response */
431         if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) {
432                 ht_dbg(sta->sdata,
433                        "timer expired on %pM tid %d not expecting addBA response\n",
434                        sta->sta.addr, tid);
435                 return;
436         }
437
438         ht_dbg(sta->sdata, "addBA response timer expired on %pM tid %d\n",
439                sta->sta.addr, tid);
440
441         ieee80211_stop_tx_ba_session(&sta->sta, tid);
442 }
443
444 static void ieee80211_send_addba_with_timeout(struct sta_info *sta,
445                                               struct tid_ampdu_tx *tid_tx)
446 {
447         struct ieee80211_sub_if_data *sdata = sta->sdata;
448         struct ieee80211_local *local = sta->local;
449         u8 tid = tid_tx->tid;
450         u16 buf_size;
451
452         if (WARN_ON_ONCE(test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state) ||
453                          test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state)))
454                 return;
455
456         lockdep_assert_wiphy(sta->local->hw.wiphy);
457
458         /* activate the timer for the recipient's addBA response */
459         mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
460         ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
461                sta->sta.addr, tid);
462
463         spin_lock_bh(&sta->lock);
464         sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
465         sta->ampdu_mlme.addba_req_num[tid]++;
466         spin_unlock_bh(&sta->lock);
467
468         if (sta->sta.valid_links ||
469             sta->sta.deflink.eht_cap.has_eht ||
470             ieee80211_hw_check(&local->hw, STRICT)) {
471                 buf_size = local->hw.max_tx_aggregation_subframes;
472         } else if (sta->sta.deflink.he_cap.has_he) {
473                 buf_size = min_t(u16, local->hw.max_tx_aggregation_subframes,
474                                  IEEE80211_MAX_AMPDU_BUF_HE);
475         } else {
476                 /*
477                  * We really should use what the driver told us it will
478                  * transmit as the maximum, but certain APs (e.g. the
479                  * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012)
480                  * will crash when we use a lower number.
481                  */
482                 buf_size = IEEE80211_MAX_AMPDU_BUF_HT;
483         }
484
485         /* send AddBA request */
486         ieee80211_send_addba_request(sta, tid, tid_tx->dialog_token,
487                                      tid_tx->ssn, buf_size, tid_tx->timeout);
488
489         WARN_ON(test_and_set_bit(HT_AGG_STATE_SENT_ADDBA, &tid_tx->state));
490 }
491
492 void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
493 {
494         struct tid_ampdu_tx *tid_tx;
495         struct ieee80211_local *local = sta->local;
496         struct ieee80211_sub_if_data *sdata = sta->sdata;
497         struct ieee80211_ampdu_params params = {
498                 .sta = &sta->sta,
499                 .action = IEEE80211_AMPDU_TX_START,
500                 .tid = tid,
501                 .buf_size = 0,
502                 .amsdu = false,
503                 .timeout = 0,
504         };
505         int ret;
506
507         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
508
509         /*
510          * Start queuing up packets for this aggregation session.
511          * We're going to release them once the driver is OK with
512          * that.
513          */
514         clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
515
516         /*
517          * Make sure no packets are being processed. This ensures that
518          * we have a valid starting sequence number and that in-flight
519          * packets have been flushed out and no packets for this TID
520          * will go into the driver during the ampdu_action call.
521          */
522         synchronize_net();
523
524         params.ssn = sta->tid_seq[tid] >> 4;
525         ret = drv_ampdu_action(local, sdata, &params);
526         tid_tx->ssn = params.ssn;
527         if (ret == IEEE80211_AMPDU_TX_START_DELAY_ADDBA) {
528                 return;
529         } else if (ret == IEEE80211_AMPDU_TX_START_IMMEDIATE) {
530                 /*
531                  * We didn't send the request yet, so don't need to check
532                  * here if we already got a response, just mark as driver
533                  * ready immediately.
534                  */
535                 set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state);
536         } else if (ret) {
537                 ht_dbg(sdata,
538                        "BA request denied - HW unavailable for %pM tid %d\n",
539                        sta->sta.addr, tid);
540                 spin_lock_bh(&sta->lock);
541                 ieee80211_agg_splice_packets(sdata, tid_tx, tid);
542                 ieee80211_assign_tid_tx(sta, tid, NULL);
543                 ieee80211_agg_splice_finish(sdata, tid);
544                 spin_unlock_bh(&sta->lock);
545
546                 ieee80211_agg_start_txq(sta, tid, false);
547
548                 kfree_rcu(tid_tx, rcu_head);
549                 return;
550         }
551
552         ieee80211_send_addba_with_timeout(sta, tid_tx);
553 }
554
555 void ieee80211_refresh_tx_agg_session_timer(struct ieee80211_sta *pubsta,
556                                             u16 tid)
557 {
558         struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
559         struct tid_ampdu_tx *tid_tx;
560
561         if (WARN_ON_ONCE(tid >= IEEE80211_NUM_TIDS))
562                 return;
563
564         tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
565         if (!tid_tx)
566                 return;
567
568         tid_tx->last_tx = jiffies;
569 }
570 EXPORT_SYMBOL(ieee80211_refresh_tx_agg_session_timer);
571
572 /*
573  * After accepting the AddBA Response we activated a timer,
574  * resetting it after each frame that we send.
575  */
576 static void sta_tx_agg_session_timer_expired(struct timer_list *t)
577 {
578         struct tid_ampdu_tx *tid_tx = timer_container_of(tid_tx, t,
579                                                          session_timer);
580         struct sta_info *sta = tid_tx->sta;
581         u8 tid = tid_tx->tid;
582         unsigned long timeout;
583
584         if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
585                 return;
586         }
587
588         timeout = tid_tx->last_tx + TU_TO_JIFFIES(tid_tx->timeout);
589         if (time_is_after_jiffies(timeout)) {
590                 mod_timer(&tid_tx->session_timer, timeout);
591                 return;
592         }
593
594         ht_dbg(sta->sdata, "tx session timer expired on %pM tid %d\n",
595                sta->sta.addr, tid);
596
597         ieee80211_stop_tx_ba_session(&sta->sta, tid);
598 }
599
600 int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
601                                   u16 timeout)
602 {
603         struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
604         struct ieee80211_sub_if_data *sdata = sta->sdata;
605         struct ieee80211_local *local = sdata->local;
606         struct tid_ampdu_tx *tid_tx;
607         int ret = 0;
608
609         trace_api_start_tx_ba_session(pubsta, tid);
610
611         if (WARN(sta->reserved_tid == tid,
612                  "Requested to start BA session on reserved tid=%d", tid))
613                 return -EINVAL;
614
615         if (!pubsta->valid_links &&
616             !pubsta->deflink.ht_cap.ht_supported &&
617             !pubsta->deflink.vht_cap.vht_supported &&
618             !pubsta->deflink.he_cap.has_he &&
619             !pubsta->deflink.eht_cap.has_eht)
620                 return -EINVAL;
621
622         if (WARN_ON_ONCE(!local->ops->ampdu_action))
623                 return -EINVAL;
624
625         if ((tid >= IEEE80211_NUM_TIDS) ||
626             !ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION) ||
627             ieee80211_hw_check(&local->hw, TX_AMPDU_SETUP_IN_HW))
628                 return -EINVAL;
629
630         if (WARN_ON(tid >= IEEE80211_FIRST_TSPEC_TSID))
631                 return -EINVAL;
632
633         ht_dbg(sdata, "Open BA session requested for %pM tid %u\n",
634                pubsta->addr, tid);
635
636         if (sdata->vif.type != NL80211_IFTYPE_STATION &&
637             sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
638             sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
639             sdata->vif.type != NL80211_IFTYPE_AP &&
640             sdata->vif.type != NL80211_IFTYPE_ADHOC)
641                 return -EINVAL;
642
643         if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
644                 ht_dbg(sdata,
645                        "BA sessions blocked - Denying BA session request %pM tid %d\n",
646                        sta->sta.addr, tid);
647                 return -EINVAL;
648         }
649
650         if (test_sta_flag(sta, WLAN_STA_MFP) &&
651             !test_sta_flag(sta, WLAN_STA_AUTHORIZED)) {
652                 ht_dbg(sdata,
653                        "MFP STA not authorized - deny BA session request %pM tid %d\n",
654                        sta->sta.addr, tid);
655                 return -EINVAL;
656         }
657
658         /*
659          * 802.11n-2009 11.5.1.1: If the initiating STA is an HT STA, is a
660          * member of an IBSS, and has no other existing Block Ack agreement
661          * with the recipient STA, then the initiating STA shall transmit a
662          * Probe Request frame to the recipient STA and shall not transmit an
663          * ADDBA Request frame unless it receives a Probe Response frame
664          * from the recipient within dot11ADDBAFailureTimeout.
665          *
666          * The probe request mechanism for ADDBA is currently not implemented,
667          * but we only build up Block Ack session with HT STAs. This information
668          * is set when we receive a bss info from a probe response or a beacon.
669          */
670         if (sta->sdata->vif.type == NL80211_IFTYPE_ADHOC &&
671             !sta->sta.deflink.ht_cap.ht_supported) {
672                 ht_dbg(sdata,
673                        "BA request denied - IBSS STA %pM does not advertise HT support\n",
674                        pubsta->addr);
675                 return -EINVAL;
676         }
677
678         spin_lock_bh(&sta->lock);
679
680         /* we have tried too many times, receiver does not want A-MPDU */
681         if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) {
682                 ret = -EBUSY;
683                 goto err_unlock_sta;
684         }
685
686         /*
687          * if we have tried more than HT_AGG_BURST_RETRIES times we
688          * will spread our requests in time to avoid stalling connection
689          * for too long
690          */
691         if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_BURST_RETRIES &&
692             time_before(jiffies, sta->ampdu_mlme.last_addba_req_time[tid] +
693                         HT_AGG_RETRIES_PERIOD)) {
694                 ht_dbg(sdata,
695                        "BA request denied - %d failed requests on %pM tid %u\n",
696                        sta->ampdu_mlme.addba_req_num[tid], sta->sta.addr, tid);
697                 ret = -EBUSY;
698                 goto err_unlock_sta;
699         }
700
701         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
702         /* check if the TID is not in aggregation flow already */
703         if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) {
704                 ht_dbg(sdata,
705                        "BA request denied - session is not idle on %pM tid %u\n",
706                        sta->sta.addr, tid);
707                 ret = -EAGAIN;
708                 goto err_unlock_sta;
709         }
710
711         /* prepare A-MPDU MLME for Tx aggregation */
712         tid_tx = kzalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC);
713         if (!tid_tx) {
714                 ret = -ENOMEM;
715                 goto err_unlock_sta;
716         }
717
718         skb_queue_head_init(&tid_tx->pending);
719         __set_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
720
721         tid_tx->timeout = timeout;
722         tid_tx->sta = sta;
723         tid_tx->tid = tid;
724
725         /* response timer */
726         timer_setup(&tid_tx->addba_resp_timer, sta_addba_resp_timer_expired, 0);
727
728         /* tx timer */
729         timer_setup(&tid_tx->session_timer,
730                     sta_tx_agg_session_timer_expired, TIMER_DEFERRABLE);
731
732         /* assign a dialog token */
733         sta->ampdu_mlme.dialog_token_allocator++;
734         tid_tx->dialog_token = sta->ampdu_mlme.dialog_token_allocator;
735
736         /*
737          * Finally, assign it to the start array; the work item will
738          * collect it and move it to the normal array.
739          */
740         sta->ampdu_mlme.tid_start_tx[tid] = tid_tx;
741
742         wiphy_work_queue(local->hw.wiphy, &sta->ampdu_mlme.work);
743
744         /* this flow continues off the work */
745  err_unlock_sta:
746         spin_unlock_bh(&sta->lock);
747         return ret;
748 }
749 EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
750
751 static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
752                                          struct sta_info *sta, u16 tid)
753 {
754         struct tid_ampdu_tx *tid_tx;
755         struct ieee80211_ampdu_params params = {
756                 .sta = &sta->sta,
757                 .action = IEEE80211_AMPDU_TX_OPERATIONAL,
758                 .tid = tid,
759                 .timeout = 0,
760                 .ssn = 0,
761         };
762
763         lockdep_assert_wiphy(sta->local->hw.wiphy);
764
765         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
766         params.buf_size = tid_tx->buf_size;
767         params.amsdu = tid_tx->amsdu;
768
769         ht_dbg(sta->sdata, "Aggregation is on for %pM tid %d\n",
770                sta->sta.addr, tid);
771
772         drv_ampdu_action(local, sta->sdata, &params);
773
774         /*
775          * synchronize with TX path, while splicing the TX path
776          * should block so it won't put more packets onto pending.
777          */
778         spin_lock_bh(&sta->lock);
779
780         ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid);
781         /*
782          * Now mark as operational. This will be visible
783          * in the TX path, and lets it go lock-free in
784          * the common case.
785          */
786         set_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
787         ieee80211_agg_splice_finish(sta->sdata, tid);
788
789         spin_unlock_bh(&sta->lock);
790
791         ieee80211_agg_start_txq(sta, tid, true);
792 }
793
794 void ieee80211_start_tx_ba_cb(struct sta_info *sta, int tid,
795                               struct tid_ampdu_tx *tid_tx)
796 {
797         struct ieee80211_sub_if_data *sdata = sta->sdata;
798         struct ieee80211_local *local = sdata->local;
799
800         lockdep_assert_wiphy(sta->local->hw.wiphy);
801
802         if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state)))
803                 return;
804
805         if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state) ||
806             test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state))
807                 return;
808
809         if (!test_bit(HT_AGG_STATE_SENT_ADDBA, &tid_tx->state)) {
810                 ieee80211_send_addba_with_timeout(sta, tid_tx);
811                 /* RESPONSE_RECEIVED state would trigger the flow again */
812                 return;
813         }
814
815         if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state))
816                 ieee80211_agg_tx_operational(local, sta, tid);
817 }
818
819 static struct tid_ampdu_tx *
820 ieee80211_lookup_tid_tx(struct ieee80211_sub_if_data *sdata,
821                         const u8 *ra, u16 tid, struct sta_info **sta)
822 {
823         struct tid_ampdu_tx *tid_tx;
824
825         if (tid >= IEEE80211_NUM_TIDS) {
826                 ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n",
827                        tid, IEEE80211_NUM_TIDS);
828                 return NULL;
829         }
830
831         *sta = sta_info_get_bss(sdata, ra);
832         if (!*sta) {
833                 ht_dbg(sdata, "Could not find station: %pM\n", ra);
834                 return NULL;
835         }
836
837         tid_tx = rcu_dereference((*sta)->ampdu_mlme.tid_tx[tid]);
838
839         if (WARN_ON(!tid_tx))
840                 ht_dbg(sdata, "addBA was not requested!\n");
841
842         return tid_tx;
843 }
844
845 void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
846                                       const u8 *ra, u16 tid)
847 {
848         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
849         struct ieee80211_local *local = sdata->local;
850         struct sta_info *sta;
851         struct tid_ampdu_tx *tid_tx;
852
853         trace_api_start_tx_ba_cb(sdata, ra, tid);
854
855         rcu_read_lock();
856         tid_tx = ieee80211_lookup_tid_tx(sdata, ra, tid, &sta);
857         if (!tid_tx)
858                 goto out;
859
860         set_bit(HT_AGG_STATE_START_CB, &tid_tx->state);
861         wiphy_work_queue(local->hw.wiphy, &sta->ampdu_mlme.work);
862  out:
863         rcu_read_unlock();
864 }
865 EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe);
866
867 int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
868 {
869         struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
870         struct ieee80211_sub_if_data *sdata = sta->sdata;
871         struct ieee80211_local *local = sdata->local;
872         struct tid_ampdu_tx *tid_tx;
873         int ret = 0;
874
875         trace_api_stop_tx_ba_session(pubsta, tid);
876
877         if (!local->ops->ampdu_action)
878                 return -EINVAL;
879
880         if (tid >= IEEE80211_NUM_TIDS)
881                 return -EINVAL;
882
883         spin_lock_bh(&sta->lock);
884         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
885
886         if (!tid_tx) {
887                 ret = -ENOENT;
888                 goto unlock;
889         }
890
891         WARN(sta->reserved_tid == tid,
892              "Requested to stop BA session on reserved tid=%d", tid);
893
894         if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
895                 /* already in progress stopping it */
896                 ret = 0;
897                 goto unlock;
898         }
899
900         set_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state);
901         wiphy_work_queue(local->hw.wiphy, &sta->ampdu_mlme.work);
902
903  unlock:
904         spin_unlock_bh(&sta->lock);
905         return ret;
906 }
907 EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
908
909 void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid,
910                              struct tid_ampdu_tx *tid_tx)
911 {
912         struct ieee80211_sub_if_data *sdata = sta->sdata;
913         bool send_delba = false;
914         bool start_txq = false;
915
916         ht_dbg(sdata, "Stopping Tx BA session for %pM tid %d\n",
917                sta->sta.addr, tid);
918
919         spin_lock_bh(&sta->lock);
920
921         if (!test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
922                 ht_dbg(sdata,
923                        "unexpected callback to A-MPDU stop for %pM tid %d\n",
924                        sta->sta.addr, tid);
925                 goto unlock_sta;
926         }
927
928         if (tid_tx->stop_initiator == WLAN_BACK_INITIATOR && tid_tx->tx_stop)
929                 send_delba = true;
930
931         ieee80211_remove_tid_tx(sta, tid);
932         start_txq = true;
933
934  unlock_sta:
935         spin_unlock_bh(&sta->lock);
936
937         if (start_txq)
938                 ieee80211_agg_start_txq(sta, tid, false);
939
940         if (send_delba)
941                 ieee80211_send_delba(sdata, sta->sta.addr, tid,
942                         WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
943 }
944
945 void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
946                                      const u8 *ra, u16 tid)
947 {
948         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
949         struct ieee80211_local *local = sdata->local;
950         struct sta_info *sta;
951         struct tid_ampdu_tx *tid_tx;
952
953         trace_api_stop_tx_ba_cb(sdata, ra, tid);
954
955         rcu_read_lock();
956         tid_tx = ieee80211_lookup_tid_tx(sdata, ra, tid, &sta);
957         if (!tid_tx)
958                 goto out;
959
960         set_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state);
961         wiphy_work_queue(local->hw.wiphy, &sta->ampdu_mlme.work);
962  out:
963         rcu_read_unlock();
964 }
965 EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe);
966
967
968 void ieee80211_process_addba_resp(struct ieee80211_local *local,
969                                   struct sta_info *sta,
970                                   struct ieee80211_mgmt *mgmt,
971                                   size_t len)
972 {
973         struct tid_ampdu_tx *tid_tx;
974         struct ieee80211_txq *txq;
975         u16 capab, tid, buf_size;
976         bool amsdu;
977
978         lockdep_assert_wiphy(sta->local->hw.wiphy);
979
980         capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
981         amsdu = capab & IEEE80211_ADDBA_PARAM_AMSDU_MASK;
982         tid = u16_get_bits(capab, IEEE80211_ADDBA_PARAM_TID_MASK);
983         buf_size = u16_get_bits(capab, IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK);
984
985         ieee80211_retrieve_addba_ext_data(sta,
986                                           mgmt->u.action.u.addba_resp.variable,
987                                           len - offsetof(typeof(*mgmt),
988                                                          u.action.u.addba_resp.variable),
989                                           &buf_size);
990
991         buf_size = min(buf_size, local->hw.max_tx_aggregation_subframes);
992
993         txq = sta->sta.txq[tid];
994         if (!amsdu && txq)
995                 set_bit(IEEE80211_TXQ_NO_AMSDU, &to_txq_info(txq)->flags);
996
997         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
998         if (!tid_tx)
999                 return;
1000
1001         if (mgmt->u.action.u.addba_resp.dialog_token != tid_tx->dialog_token) {
1002                 ht_dbg(sta->sdata, "wrong addBA response token, %pM tid %d\n",
1003                        sta->sta.addr, tid);
1004                 return;
1005         }
1006
1007         timer_delete_sync(&tid_tx->addba_resp_timer);
1008
1009         ht_dbg(sta->sdata, "switched off addBA timer for %pM tid %d\n",
1010                sta->sta.addr, tid);
1011
1012         /*
1013          * addba_resp_timer may have fired before we got here, and
1014          * caused WANT_STOP to be set. If the stop then was already
1015          * processed further, STOPPING might be set.
1016          */
1017         if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) ||
1018             test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
1019                 ht_dbg(sta->sdata,
1020                        "got addBA resp for %pM tid %d but we already gave up\n",
1021                        sta->sta.addr, tid);
1022                 return;
1023         }
1024
1025         /*
1026          * IEEE 802.11-2007 7.3.1.14:
1027          * In an ADDBA Response frame, when the Status Code field
1028          * is set to 0, the Buffer Size subfield is set to a value
1029          * of at least 1.
1030          */
1031         if (le16_to_cpu(mgmt->u.action.u.addba_resp.status)
1032                         == WLAN_STATUS_SUCCESS && buf_size) {
1033                 if (test_and_set_bit(HT_AGG_STATE_RESPONSE_RECEIVED,
1034                                      &tid_tx->state)) {
1035                         /* ignore duplicate response */
1036                         return;
1037                 }
1038
1039                 tid_tx->buf_size = buf_size;
1040                 tid_tx->amsdu = amsdu;
1041
1042                 if (test_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state))
1043                         ieee80211_agg_tx_operational(local, sta, tid);
1044
1045                 sta->ampdu_mlme.addba_req_num[tid] = 0;
1046
1047                 tid_tx->timeout =
1048                         le16_to_cpu(mgmt->u.action.u.addba_resp.timeout);
1049
1050                 if (tid_tx->timeout) {
1051                         mod_timer(&tid_tx->session_timer,
1052                                   TU_TO_EXP_TIME(tid_tx->timeout));
1053                         tid_tx->last_tx = jiffies;
1054                 }
1055
1056         } else {
1057                 __ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_DECLINED);
1058         }
1059 }