2 tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
11 This option enables the hardware independent IEEE 802.11
18 depends on NETDEVICES_MULTIQUEUE
20 comment "QoS/HT support disabled"
21 depends on MAC80211 && !MAC80211_QOS
22 comment "QoS/HT support needs CONFIG_NET_SCHED"
23 depends on MAC80211 && !NET_SCHED
24 comment "QoS/HT support needs CONFIG_NETDEVICES_MULTIQUEUE"
25 depends on MAC80211 && !NETDEVICES_MULTIQUEUE
27 menu "Rate control algorithm selection"
28 depends on MAC80211 != n
30 config MAC80211_RC_PID
31 bool "PID controller based rate control algorithm" if EMBEDDED
34 This option enables a TX rate control algorithm for
35 mac80211 that uses a PID controller to select the TX
39 prompt "Default rate control algorithm"
40 default MAC80211_RC_DEFAULT_PID
42 This option selects the default rate control algorithm
43 mac80211 will use. Note that this default can still be
44 overriden through the ieee80211_default_rc_algo module
45 parameter if different algorithms are available.
47 config MAC80211_RC_DEFAULT_PID
48 bool "PID controller based rate control algorithm"
49 depends on MAC80211_RC_PID
51 Select the PID controller based rate control as the
52 default rate control algorithm. You should choose
53 this unless you know what you are doing.
57 config MAC80211_RC_DEFAULT
59 default "pid" if MAC80211_RC_DEFAULT_PID
65 bool "Enable mac80211 mesh networking (pre-802.11s) support"
66 depends on MAC80211 && EXPERIMENTAL
68 This options enables support of Draft 802.11s mesh networking.
69 The implementation is based on Draft 1.08 of the Mesh Networking
70 amendment. For more information visit http://o11s.org/.
74 bool "Enable LED triggers"
79 This option enables a few LED triggers for different
80 packet receive/transmit events.
82 config MAC80211_DEBUGFS
83 bool "Export mac80211 internals in DebugFS"
84 depends on MAC80211 && DEBUG_FS
86 Select this to see extensive information about
87 the internal state of mac80211 in debugfs.
89 Say N unless you know you need this.
91 config MAC80211_DEBUG_PACKET_ALIGNMENT
92 bool "Enable packet alignment debugging"
95 This option is recommended for driver authors and strongly
96 discouraged for everybody else, it will trigger a warning
97 when a driver hands mac80211 a buffer that is aligned in
98 a way that will cause problems with the IP stack on some
101 Say N unless you're writing a mac80211 based driver.
103 config MAC80211_DEBUG
104 bool "Enable debugging output"
107 This option will enable debug tracing output for the
108 ieee80211 network stack.
110 If you are not trying to debug or develop the ieee80211
111 subsystem, you most likely want to say N here.
113 config MAC80211_HT_DEBUG
114 bool "Enable HT debugging output"
115 depends on MAC80211_DEBUG
117 This option enables 802.11n High Throughput features
118 debug tracing output.
120 If you are not trying to debug of develop the ieee80211
121 subsystem, you most likely want to say N here.
123 config MAC80211_VERBOSE_DEBUG
124 bool "Verbose debugging output"
125 depends on MAC80211_DEBUG
127 config MAC80211_LOWTX_FRAME_DUMP
128 bool "Debug frame dumping"
129 depends on MAC80211_DEBUG
131 Selecting this option will cause the stack to
132 print a message for each frame that is handed
133 to the lowlevel driver for transmission. This
134 message includes all MAC addresses and the
137 If unsure, say N and insert the debugging code
138 you require into the driver you are debugging.
140 config MAC80211_TKIP_DEBUG
141 bool "TKIP debugging"
142 depends on MAC80211_DEBUG
144 config MAC80211_DEBUG_COUNTERS
145 bool "Extra statistics for TX/RX debugging"
146 depends on MAC80211_DEBUG
148 config MAC80211_IBSS_DEBUG
149 bool "Support for IBSS testing"
150 depends on MAC80211_DEBUG
152 Say Y here if you intend to debug the IBSS code.
154 config MAC80211_VERBOSE_PS_DEBUG
155 bool "Verbose powersave mode debugging"
156 depends on MAC80211_DEBUG
158 Say Y here to print out verbose powersave
161 config MAC80211_VERBOSE_MPL_DEBUG
162 bool "Verbose mesh peer link debugging"
163 depends on MAC80211_DEBUG && MAC80211_MESH
165 Say Y here to print out verbose mesh peer link
168 config MAC80211_VERBOSE_SPECT_MGMT_DEBUG
169 bool "Verbose Spectrum Management (IEEE 802.11h)debugging"
170 depends on MAC80211_DEBUG
172 Say Y here to print out verbose Spectrum Management (IEEE 802.11h)