net: cleanup unsigned to unsigned int
[linux-2.6-block.git] / net / ethernet / eth.c
1 /*
2  * INET         An implementation of the TCP/IP protocol suite for the LINUX
3  *              operating system.  INET is implemented using the  BSD Socket
4  *              interface as the means of communication with the user level.
5  *
6  *              Ethernet-type device handling.
7  *
8  * Version:     @(#)eth.c       1.0.7   05/25/93
9  *
10  * Authors:     Ross Biro
11  *              Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
12  *              Mark Evans, <evansmp@uhura.aston.ac.uk>
13  *              Florian  La Roche, <rzsfl@rz.uni-sb.de>
14  *              Alan Cox, <gw4pts@gw4pts.ampr.org>
15  *
16  * Fixes:
17  *              Mr Linux        : Arp problems
18  *              Alan Cox        : Generic queue tidyup (very tiny here)
19  *              Alan Cox        : eth_header ntohs should be htons
20  *              Alan Cox        : eth_rebuild_header missing an htons and
21  *                                minor other things.
22  *              Tegge           : Arp bug fixes.
23  *              Florian         : Removed many unnecessary functions, code cleanup
24  *                                and changes for new arp and skbuff.
25  *              Alan Cox        : Redid header building to reflect new format.
26  *              Alan Cox        : ARP only when compiled with CONFIG_INET
27  *              Greg Page       : 802.2 and SNAP stuff.
28  *              Alan Cox        : MAC layer pointers/new format.
29  *              Paul Gortmaker  : eth_copy_and_sum shouldn't csum padding.
30  *              Alan Cox        : Protect against forwarding explosions with
31  *                                older network drivers and IFF_ALLMULTI.
32  *      Christer Weinigel       : Better rebuild header message.
33  *             Andrew Morton    : 26Feb01: kill ether_setup() - use netdev_boot_setup().
34  *
35  *              This program is free software; you can redistribute it and/or
36  *              modify it under the terms of the GNU General Public License
37  *              as published by the Free Software Foundation; either version
38  *              2 of the License, or (at your option) any later version.
39  */
40 #include <linux/module.h>
41 #include <linux/types.h>
42 #include <linux/kernel.h>
43 #include <linux/string.h>
44 #include <linux/mm.h>
45 #include <linux/socket.h>
46 #include <linux/in.h>
47 #include <linux/inet.h>
48 #include <linux/ip.h>
49 #include <linux/netdevice.h>
50 #include <linux/etherdevice.h>
51 #include <linux/skbuff.h>
52 #include <linux/errno.h>
53 #include <linux/init.h>
54 #include <linux/if_ether.h>
55 #include <net/dst.h>
56 #include <net/arp.h>
57 #include <net/sock.h>
58 #include <net/ipv6.h>
59 #include <net/ip.h>
60 #include <net/dsa.h>
61 #include <asm/uaccess.h>
62
63 __setup("ether=", netdev_boot_setup);
64
65 /**
66  * eth_header - create the Ethernet header
67  * @skb:        buffer to alter
68  * @dev:        source device
69  * @type:       Ethernet type field
70  * @daddr: destination address (NULL leave destination address)
71  * @saddr: source address (NULL use device source address)
72  * @len:   packet length (<= skb->len)
73  *
74  *
75  * Set the protocol type. For a packet of type ETH_P_802_3/2 we put the length
76  * in here instead.
77  */
78 int eth_header(struct sk_buff *skb, struct net_device *dev,
79                unsigned short type,
80                const void *daddr, const void *saddr, unsigned int len)
81 {
82         struct ethhdr *eth = (struct ethhdr *)skb_push(skb, ETH_HLEN);
83
84         if (type != ETH_P_802_3 && type != ETH_P_802_2)
85                 eth->h_proto = htons(type);
86         else
87                 eth->h_proto = htons(len);
88
89         /*
90          *      Set the source hardware address.
91          */
92
93         if (!saddr)
94                 saddr = dev->dev_addr;
95         memcpy(eth->h_source, saddr, ETH_ALEN);
96
97         if (daddr) {
98                 memcpy(eth->h_dest, daddr, ETH_ALEN);
99                 return ETH_HLEN;
100         }
101
102         /*
103          *      Anyway, the loopback-device should never use this function...
104          */
105
106         if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
107                 memset(eth->h_dest, 0, ETH_ALEN);
108                 return ETH_HLEN;
109         }
110
111         return -ETH_HLEN;
112 }
113 EXPORT_SYMBOL(eth_header);
114
115 /**
116  * eth_rebuild_header- rebuild the Ethernet MAC header.
117  * @skb: socket buffer to update
118  *
119  * This is called after an ARP or IPV6 ndisc it's resolution on this
120  * sk_buff. We now let protocol (ARP) fill in the other fields.
121  *
122  * This routine CANNOT use cached dst->neigh!
123  * Really, it is used only when dst->neigh is wrong.
124  */
125 int eth_rebuild_header(struct sk_buff *skb)
126 {
127         struct ethhdr *eth = (struct ethhdr *)skb->data;
128         struct net_device *dev = skb->dev;
129
130         switch (eth->h_proto) {
131 #ifdef CONFIG_INET
132         case htons(ETH_P_IP):
133                 return arp_find(eth->h_dest, skb);
134 #endif
135         default:
136                 printk(KERN_DEBUG
137                        "%s: unable to resolve type %X addresses.\n",
138                        dev->name, ntohs(eth->h_proto));
139
140                 memcpy(eth->h_source, dev->dev_addr, ETH_ALEN);
141                 break;
142         }
143
144         return 0;
145 }
146 EXPORT_SYMBOL(eth_rebuild_header);
147
148 /**
149  * eth_type_trans - determine the packet's protocol ID.
150  * @skb: received socket data
151  * @dev: receiving network device
152  *
153  * The rule here is that we
154  * assume 802.3 if the type field is short enough to be a length.
155  * This is normal practice and works for any 'now in use' protocol.
156  */
157 __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev)
158 {
159         struct ethhdr *eth;
160
161         skb->dev = dev;
162         skb_reset_mac_header(skb);
163         skb_pull_inline(skb, ETH_HLEN);
164         eth = eth_hdr(skb);
165
166         if (unlikely(is_multicast_ether_addr(eth->h_dest))) {
167                 if (!compare_ether_addr_64bits(eth->h_dest, dev->broadcast))
168                         skb->pkt_type = PACKET_BROADCAST;
169                 else
170                         skb->pkt_type = PACKET_MULTICAST;
171         }
172
173         /*
174          *      This ALLMULTI check should be redundant by 1.4
175          *      so don't forget to remove it.
176          *
177          *      Seems, you forgot to remove it. All silly devices
178          *      seems to set IFF_PROMISC.
179          */
180
181         else if (1 /*dev->flags&IFF_PROMISC */ ) {
182                 if (unlikely(compare_ether_addr_64bits(eth->h_dest, dev->dev_addr)))
183                         skb->pkt_type = PACKET_OTHERHOST;
184         }
185
186         /*
187          * Some variants of DSA tagging don't have an ethertype field
188          * at all, so we check here whether one of those tagging
189          * variants has been configured on the receiving interface,
190          * and if so, set skb->protocol without looking at the packet.
191          */
192         if (netdev_uses_dsa_tags(dev))
193                 return htons(ETH_P_DSA);
194         if (netdev_uses_trailer_tags(dev))
195                 return htons(ETH_P_TRAILER);
196
197         if (ntohs(eth->h_proto) >= 1536)
198                 return eth->h_proto;
199
200         /*
201          *      This is a magic hack to spot IPX packets. Older Novell breaks
202          *      the protocol design and runs IPX over 802.3 without an 802.2 LLC
203          *      layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
204          *      won't work for fault tolerant netware but does for the rest.
205          */
206         if (skb->len >= 2 && *(unsigned short *)(skb->data) == 0xFFFF)
207                 return htons(ETH_P_802_3);
208
209         /*
210          *      Real 802.2 LLC
211          */
212         return htons(ETH_P_802_2);
213 }
214 EXPORT_SYMBOL(eth_type_trans);
215
216 /**
217  * eth_header_parse - extract hardware address from packet
218  * @skb: packet to extract header from
219  * @haddr: destination buffer
220  */
221 int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr)
222 {
223         const struct ethhdr *eth = eth_hdr(skb);
224         memcpy(haddr, eth->h_source, ETH_ALEN);
225         return ETH_ALEN;
226 }
227 EXPORT_SYMBOL(eth_header_parse);
228
229 /**
230  * eth_header_cache - fill cache entry from neighbour
231  * @neigh: source neighbour
232  * @hh: destination cache entry
233  * @type: Ethernet type field
234  * Create an Ethernet header template from the neighbour.
235  */
236 int eth_header_cache(const struct neighbour *neigh, struct hh_cache *hh, __be16 type)
237 {
238         struct ethhdr *eth;
239         const struct net_device *dev = neigh->dev;
240
241         eth = (struct ethhdr *)
242             (((u8 *) hh->hh_data) + (HH_DATA_OFF(sizeof(*eth))));
243
244         if (type == htons(ETH_P_802_3))
245                 return -1;
246
247         eth->h_proto = type;
248         memcpy(eth->h_source, dev->dev_addr, ETH_ALEN);
249         memcpy(eth->h_dest, neigh->ha, ETH_ALEN);
250         hh->hh_len = ETH_HLEN;
251         return 0;
252 }
253 EXPORT_SYMBOL(eth_header_cache);
254
255 /**
256  * eth_header_cache_update - update cache entry
257  * @hh: destination cache entry
258  * @dev: network device
259  * @haddr: new hardware address
260  *
261  * Called by Address Resolution module to notify changes in address.
262  */
263 void eth_header_cache_update(struct hh_cache *hh,
264                              const struct net_device *dev,
265                              const unsigned char *haddr)
266 {
267         memcpy(((u8 *) hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)),
268                haddr, ETH_ALEN);
269 }
270 EXPORT_SYMBOL(eth_header_cache_update);
271
272 /**
273  * eth_mac_addr - set new Ethernet hardware address
274  * @dev: network device
275  * @p: socket address
276  * Change hardware address of device.
277  *
278  * This doesn't change hardware matching, so needs to be overridden
279  * for most real devices.
280  */
281 int eth_mac_addr(struct net_device *dev, void *p)
282 {
283         struct sockaddr *addr = p;
284
285         if (netif_running(dev))
286                 return -EBUSY;
287         if (!is_valid_ether_addr(addr->sa_data))
288                 return -EADDRNOTAVAIL;
289         memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
290         /* if device marked as NET_ADDR_RANDOM, reset it */
291         dev->addr_assign_type &= ~NET_ADDR_RANDOM;
292         return 0;
293 }
294 EXPORT_SYMBOL(eth_mac_addr);
295
296 /**
297  * eth_change_mtu - set new MTU size
298  * @dev: network device
299  * @new_mtu: new Maximum Transfer Unit
300  *
301  * Allow changing MTU size. Needs to be overridden for devices
302  * supporting jumbo frames.
303  */
304 int eth_change_mtu(struct net_device *dev, int new_mtu)
305 {
306         if (new_mtu < 68 || new_mtu > ETH_DATA_LEN)
307                 return -EINVAL;
308         dev->mtu = new_mtu;
309         return 0;
310 }
311 EXPORT_SYMBOL(eth_change_mtu);
312
313 int eth_validate_addr(struct net_device *dev)
314 {
315         if (!is_valid_ether_addr(dev->dev_addr))
316                 return -EADDRNOTAVAIL;
317
318         return 0;
319 }
320 EXPORT_SYMBOL(eth_validate_addr);
321
322 const struct header_ops eth_header_ops ____cacheline_aligned = {
323         .create         = eth_header,
324         .parse          = eth_header_parse,
325         .rebuild        = eth_rebuild_header,
326         .cache          = eth_header_cache,
327         .cache_update   = eth_header_cache_update,
328 };
329
330 /**
331  * ether_setup - setup Ethernet network device
332  * @dev: network device
333  * Fill in the fields of the device structure with Ethernet-generic values.
334  */
335 void ether_setup(struct net_device *dev)
336 {
337         dev->header_ops         = &eth_header_ops;
338         dev->type               = ARPHRD_ETHER;
339         dev->hard_header_len    = ETH_HLEN;
340         dev->mtu                = ETH_DATA_LEN;
341         dev->addr_len           = ETH_ALEN;
342         dev->tx_queue_len       = 1000; /* Ethernet wants good queues */
343         dev->flags              = IFF_BROADCAST|IFF_MULTICAST;
344         dev->priv_flags         |= IFF_TX_SKB_SHARING;
345
346         memset(dev->broadcast, 0xFF, ETH_ALEN);
347
348 }
349 EXPORT_SYMBOL(ether_setup);
350
351 /**
352  * alloc_etherdev_mqs - Allocates and sets up an Ethernet device
353  * @sizeof_priv: Size of additional driver-private structure to be allocated
354  *      for this Ethernet device
355  * @txqs: The number of TX queues this device has.
356  * @rxqs: The number of RX queues this device has.
357  *
358  * Fill in the fields of the device structure with Ethernet-generic
359  * values. Basically does everything except registering the device.
360  *
361  * Constructs a new net device, complete with a private data area of
362  * size (sizeof_priv).  A 32-byte (not bit) alignment is enforced for
363  * this private data area.
364  */
365
366 struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs,
367                                       unsigned int rxqs)
368 {
369         return alloc_netdev_mqs(sizeof_priv, "eth%d", ether_setup, txqs, rxqs);
370 }
371 EXPORT_SYMBOL(alloc_etherdev_mqs);
372
373 static size_t _format_mac_addr(char *buf, int buflen,
374                                const unsigned char *addr, int len)
375 {
376         int i;
377         char *cp = buf;
378
379         for (i = 0; i < len; i++) {
380                 cp += scnprintf(cp, buflen - (cp - buf), "%02x", addr[i]);
381                 if (i == len - 1)
382                         break;
383                 cp += scnprintf(cp, buflen - (cp - buf), ":");
384         }
385         return cp - buf;
386 }
387
388 ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len)
389 {
390         size_t l;
391
392         l = _format_mac_addr(buf, PAGE_SIZE, addr, len);
393         l += scnprintf(buf + l, PAGE_SIZE - l, "\n");
394         return (ssize_t)l;
395 }
396 EXPORT_SYMBOL(sysfs_format_mac);