Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
[linux-2.6-block.git] / include / target / target_core_fabric.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef TARGET_CORE_FABRIC_H
3 #define TARGET_CORE_FABRIC_H
4
5 #include <linux/configfs.h>
6 #include <linux/types.h>
7 #include <target/target_core_base.h>
8
9 struct target_core_fabric_ops {
10         struct module *module;
11         /*
12          * XXX: Special case for iscsi/iSCSI...
13          * If non-null, fabric_alias is used for matching target/$fabric
14          * ConfigFS paths. If null, fabric_name is used for this (see below).
15          */
16         const char *fabric_alias;
17         /*
18          * fabric_name is used for matching target/$fabric ConfigFS paths
19          * without a fabric_alias (see above). It's also used for the ALUA state
20          * path and is stored on disk with PR state.
21          */
22         const char *fabric_name;
23         size_t node_acl_size;
24         /*
25          * Limits number of scatterlist entries per SCF_SCSI_DATA_CDB payload.
26          * Setting this value tells target-core to enforce this limit, and
27          * report as INQUIRY EVPD=b0 MAXIMUM TRANSFER LENGTH.
28          *
29          * target-core will currently reset se_cmd->data_length to this
30          * maximum size, and set UNDERFLOW residual count if length exceeds
31          * this limit.
32          *
33          * XXX: Not all initiator hosts honor this block-limit EVPD
34          * XXX: Currently assumes single PAGE_SIZE per scatterlist entry
35          */
36         u32 max_data_sg_nents;
37         char *(*tpg_get_wwn)(struct se_portal_group *);
38         u16 (*tpg_get_tag)(struct se_portal_group *);
39         u32 (*tpg_get_default_depth)(struct se_portal_group *);
40         int (*tpg_check_demo_mode)(struct se_portal_group *);
41         int (*tpg_check_demo_mode_cache)(struct se_portal_group *);
42         int (*tpg_check_demo_mode_write_protect)(struct se_portal_group *);
43         int (*tpg_check_prod_mode_write_protect)(struct se_portal_group *);
44         /*
45          * Optionally used by fabrics to allow demo-mode login, but not
46          * expose any TPG LUNs, and return 'not connected' in standard
47          * inquiry response
48          */
49         int (*tpg_check_demo_mode_login_only)(struct se_portal_group *);
50         /*
51          * Optionally used as a configfs tunable to determine when
52          * target-core should signal the PROTECT=1 feature bit for
53          * backends that don't support T10-PI, so that either fabric
54          * HW offload or target-core emulation performs the associated
55          * WRITE_STRIP and READ_INSERT operations.
56          */
57         int (*tpg_check_prot_fabric_only)(struct se_portal_group *);
58         u32 (*tpg_get_inst_index)(struct se_portal_group *);
59         /*
60          * Optional to release struct se_cmd and fabric dependent allocated
61          * I/O descriptor after command execution has finished.
62          *
63          * Returning 1 will signal a descriptor has been released.
64          * Returning 0 will signal a descriptor has not been released.
65          */
66         int (*check_stop_free)(struct se_cmd *);
67         void (*release_cmd)(struct se_cmd *);
68         void (*close_session)(struct se_session *);
69         u32 (*sess_get_index)(struct se_session *);
70         /*
71          * Used only for SCSI fabrics that contain multi-value TransportIDs
72          * (like iSCSI).  All other SCSI fabrics should set this to NULL.
73          */
74         u32 (*sess_get_initiator_sid)(struct se_session *,
75                                       unsigned char *, u32);
76         int (*write_pending)(struct se_cmd *);
77         void (*set_default_node_attributes)(struct se_node_acl *);
78         int (*get_cmd_state)(struct se_cmd *);
79         int (*queue_data_in)(struct se_cmd *);
80         int (*queue_status)(struct se_cmd *);
81         void (*queue_tm_rsp)(struct se_cmd *);
82         void (*aborted_task)(struct se_cmd *);
83         /*
84          * fabric module calls for target_core_fabric_configfs.c
85          */
86         struct se_wwn *(*fabric_make_wwn)(struct target_fabric_configfs *,
87                                 struct config_group *, const char *);
88         void (*fabric_drop_wwn)(struct se_wwn *);
89         void (*add_wwn_groups)(struct se_wwn *);
90         struct se_portal_group *(*fabric_make_tpg)(struct se_wwn *,
91                                                    const char *);
92         int (*fabric_enable_tpg)(struct se_portal_group *se_tpg, bool enable);
93         void (*fabric_drop_tpg)(struct se_portal_group *);
94         int (*fabric_post_link)(struct se_portal_group *,
95                                 struct se_lun *);
96         void (*fabric_pre_unlink)(struct se_portal_group *,
97                                 struct se_lun *);
98         struct se_tpg_np *(*fabric_make_np)(struct se_portal_group *,
99                                 struct config_group *, const char *);
100         void (*fabric_drop_np)(struct se_tpg_np *);
101         int (*fabric_init_nodeacl)(struct se_node_acl *, const char *);
102
103         struct configfs_attribute **tfc_discovery_attrs;
104         struct configfs_attribute **tfc_wwn_attrs;
105         struct configfs_attribute **tfc_tpg_base_attrs;
106         struct configfs_attribute **tfc_tpg_np_base_attrs;
107         struct configfs_attribute **tfc_tpg_attrib_attrs;
108         struct configfs_attribute **tfc_tpg_auth_attrs;
109         struct configfs_attribute **tfc_tpg_param_attrs;
110         struct configfs_attribute **tfc_tpg_nacl_base_attrs;
111         struct configfs_attribute **tfc_tpg_nacl_attrib_attrs;
112         struct configfs_attribute **tfc_tpg_nacl_auth_attrs;
113         struct configfs_attribute **tfc_tpg_nacl_param_attrs;
114
115         /*
116          * Set this member variable if the SCSI transport protocol
117          * (e.g. iSCSI) requires that the Data-Out buffer is transferred in
118          * its entirety before a command is aborted.
119          */
120         unsigned int write_pending_must_be_called:1;
121         /*
122          * Set this if the driver supports submitting commands to the backend
123          * from target_submit/target_submit_cmd.
124          */
125         unsigned int direct_submit_supp:1;
126         /*
127          * Set this to a target_submit_type value.
128          */
129         u8 default_submit_type;
130 };
131
132 int target_register_template(const struct target_core_fabric_ops *fo);
133 void target_unregister_template(const struct target_core_fabric_ops *fo);
134
135 int target_depend_item(struct config_item *item);
136 void target_undepend_item(struct config_item *item);
137
138 struct se_session *target_setup_session(struct se_portal_group *,
139                 unsigned int, unsigned int, enum target_prot_op prot_op,
140                 const char *, void *,
141                 int (*callback)(struct se_portal_group *,
142                                 struct se_session *, void *));
143 void target_remove_session(struct se_session *);
144
145 void target_stop_cmd_counter(struct target_cmd_counter *cmd_cnt);
146 void target_wait_for_cmds(struct target_cmd_counter *cmd_cnt);
147 struct target_cmd_counter *target_alloc_cmd_counter(void);
148 void target_free_cmd_counter(struct target_cmd_counter *cmd_cnt);
149
150 void transport_init_session(struct se_session *se_sess);
151 struct se_session *transport_alloc_session(enum target_prot_op);
152 int transport_alloc_session_tags(struct se_session *, unsigned int,
153                 unsigned int);
154 void    __transport_register_session(struct se_portal_group *,
155                 struct se_node_acl *, struct se_session *, void *);
156 void    transport_register_session(struct se_portal_group *,
157                 struct se_node_acl *, struct se_session *, void *);
158 ssize_t target_show_dynamic_sessions(struct se_portal_group *, char *);
159 void    transport_free_session(struct se_session *);
160 void    target_spc2_release(struct se_node_acl *nacl);
161 void    target_put_nacl(struct se_node_acl *);
162 void    transport_deregister_session_configfs(struct se_session *);
163 void    transport_deregister_session(struct se_session *);
164
165
166 void    __target_init_cmd(struct se_cmd *cmd,
167                 const struct target_core_fabric_ops *tfo,
168                 struct se_session *sess, u32 data_length, int data_direction,
169                 int task_attr, unsigned char *sense_buffer, u64 unpacked_lun,
170                 struct target_cmd_counter *cmd_cnt);
171 int     target_init_cmd(struct se_cmd *se_cmd, struct se_session *se_sess,
172                 unsigned char *sense, u64 unpacked_lun, u32 data_length,
173                 int task_attr, int data_dir, int flags);
174 int     target_submit_prep(struct se_cmd *se_cmd, unsigned char *cdb,
175                 struct scatterlist *sgl, u32 sgl_count,
176                 struct scatterlist *sgl_bidi, u32 sgl_bidi_count,
177                 struct scatterlist *sgl_prot, u32 sgl_prot_count, gfp_t gfp);
178 int     target_submit(struct se_cmd *se_cmd);
179 sense_reason_t transport_lookup_cmd_lun(struct se_cmd *);
180 sense_reason_t target_cmd_init_cdb(struct se_cmd *se_cmd, unsigned char *cdb,
181                                    gfp_t gfp);
182 sense_reason_t target_cmd_parse_cdb(struct se_cmd *);
183 void    target_submit_cmd(struct se_cmd *, struct se_session *, unsigned char *,
184                 unsigned char *, u64, u32, int, int, int);
185
186 int     target_submit_tmr(struct se_cmd *se_cmd, struct se_session *se_sess,
187                 unsigned char *sense, u64 unpacked_lun,
188                 void *fabric_tmr_ptr, unsigned char tm_type,
189                 gfp_t, u64, int);
190 sense_reason_t  transport_generic_new_cmd(struct se_cmd *);
191
192 void    target_put_cmd_and_wait(struct se_cmd *cmd);
193 void    target_execute_cmd(struct se_cmd *cmd);
194
195 int     transport_generic_free_cmd(struct se_cmd *, int);
196
197 bool    transport_wait_for_tasks(struct se_cmd *);
198 int     transport_send_check_condition_and_sense(struct se_cmd *,
199                 sense_reason_t, int);
200 int     target_send_busy(struct se_cmd *cmd);
201 int     target_get_sess_cmd(struct se_cmd *, bool);
202 int     target_put_sess_cmd(struct se_cmd *);
203 void    target_stop_session(struct se_session *se_sess);
204 void    target_wait_for_sess_cmds(struct se_session *);
205 void    target_show_cmd(const char *pfx, struct se_cmd *cmd);
206
207 int     core_tmr_alloc_req(struct se_cmd *, void *, u8, gfp_t);
208 void    core_tmr_release_req(struct se_tmr_req *);
209 int     transport_generic_handle_tmr(struct se_cmd *);
210 void    transport_generic_request_failure(struct se_cmd *, sense_reason_t);
211 int     transport_lookup_tmr_lun(struct se_cmd *);
212 void    core_allocate_nexus_loss_ua(struct se_node_acl *acl);
213
214 struct se_node_acl *core_tpg_get_initiator_node_acl(struct se_portal_group *tpg,
215                 unsigned char *);
216 bool    target_tpg_has_node_acl(struct se_portal_group *tpg,
217                 const char *);
218 struct se_node_acl *core_tpg_check_initiator_node_acl(struct se_portal_group *,
219                 unsigned char *);
220 int     core_tpg_set_initiator_node_queue_depth(struct se_node_acl *, u32);
221 int     core_tpg_set_initiator_node_tag(struct se_portal_group *,
222                 struct se_node_acl *, const char *);
223 int     core_tpg_register(struct se_wwn *, struct se_portal_group *, int);
224 int     core_tpg_deregister(struct se_portal_group *);
225
226 int     target_alloc_sgl(struct scatterlist **sgl, unsigned int *nents,
227                 u32 length, bool zero_page, bool chainable);
228 void    target_free_sgl(struct scatterlist *sgl, int nents);
229
230 /*
231  * The LIO target core uses DMA_TO_DEVICE to mean that data is going
232  * to the target (eg handling a WRITE) and DMA_FROM_DEVICE to mean
233  * that data is coming from the target (eg handling a READ).  However,
234  * this is just the opposite of what we have to tell the DMA mapping
235  * layer -- eg when handling a READ, the HBA will have to DMA the data
236  * out of memory so it can send it to the initiator, which means we
237  * need to use DMA_TO_DEVICE when we map the data.
238  */
239 static inline enum dma_data_direction
240 target_reverse_dma_direction(struct se_cmd *se_cmd)
241 {
242         if (se_cmd->se_cmd_flags & SCF_BIDI)
243                 return DMA_BIDIRECTIONAL;
244
245         switch (se_cmd->data_direction) {
246         case DMA_TO_DEVICE:
247                 return DMA_FROM_DEVICE;
248         case DMA_FROM_DEVICE:
249                 return DMA_TO_DEVICE;
250         case DMA_NONE:
251         default:
252                 return DMA_NONE;
253         }
254 }
255
256 #endif /* TARGET_CORE_FABRICH */