Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatchin...
[linux-block.git] / include / linux / soc / ti / ti_sci_protocol.h
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Texas Instruments System Control Interface Protocol
4  *
5  * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
6  *      Nishanth Menon
7  */
8
9 #ifndef __TISCI_PROTOCOL_H
10 #define __TISCI_PROTOCOL_H
11
12 /**
13  * struct ti_sci_version_info - version information structure
14  * @abi_major:  Major ABI version. Change here implies risk of backward
15  *              compatibility break.
16  * @abi_minor:  Minor ABI version. Change here implies new feature addition,
17  *              or compatible change in ABI.
18  * @firmware_revision:  Firmware revision (not usually used).
19  * @firmware_description: Firmware description (not usually used).
20  */
21 struct ti_sci_version_info {
22         u8 abi_major;
23         u8 abi_minor;
24         u16 firmware_revision;
25         char firmware_description[32];
26 };
27
28 struct ti_sci_handle;
29
30 /**
31  * struct ti_sci_core_ops - SoC Core Operations
32  * @reboot_device: Reboot the SoC
33  *              Returns 0 for successful request(ideally should never return),
34  *              else returns corresponding error value.
35  */
36 struct ti_sci_core_ops {
37         int (*reboot_device)(const struct ti_sci_handle *handle);
38 };
39
40 /**
41  * struct ti_sci_dev_ops - Device control operations
42  * @get_device: Command to request for device managed by TISCI
43  *              Returns 0 for successful exclusive request, else returns
44  *              corresponding error message.
45  * @idle_device: Command to idle a device managed by TISCI
46  *              Returns 0 for successful exclusive request, else returns
47  *              corresponding error message.
48  * @put_device: Command to release a device managed by TISCI
49  *              Returns 0 for successful release, else returns corresponding
50  *              error message.
51  * @is_valid:   Check if the device ID is a valid ID.
52  *              Returns 0 if the ID is valid, else returns corresponding error.
53  * @get_context_loss_count: Command to retrieve context loss counter - this
54  *              increments every time the device looses context. Overflow
55  *              is possible.
56  *              - count: pointer to u32 which will retrieve counter
57  *              Returns 0 for successful information request and count has
58  *              proper data, else returns corresponding error message.
59  * @is_idle:    Reports back about device idle state
60  *              - req_state: Returns requested idle state
61  *              Returns 0 for successful information request and req_state and
62  *              current_state has proper data, else returns corresponding error
63  *              message.
64  * @is_stop:    Reports back about device stop state
65  *              - req_state: Returns requested stop state
66  *              - current_state: Returns current stop state
67  *              Returns 0 for successful information request and req_state and
68  *              current_state has proper data, else returns corresponding error
69  *              message.
70  * @is_on:      Reports back about device ON(or active) state
71  *              - req_state: Returns requested ON state
72  *              - current_state: Returns current ON state
73  *              Returns 0 for successful information request and req_state and
74  *              current_state has proper data, else returns corresponding error
75  *              message.
76  * @is_transitioning: Reports back if the device is in the middle of transition
77  *              of state.
78  *              -current_state: Returns 'true' if currently transitioning.
79  * @set_device_resets: Command to configure resets for device managed by TISCI.
80  *              -reset_state: Device specific reset bit field
81  *              Returns 0 for successful request, else returns
82  *              corresponding error message.
83  * @get_device_resets: Command to read state of resets for device managed
84  *              by TISCI.
85  *              -reset_state: pointer to u32 which will retrieve resets
86  *              Returns 0 for successful request, else returns
87  *              corresponding error message.
88  *
89  * NOTE: for all these functions, the following parameters are generic in
90  * nature:
91  * -handle:     Pointer to TISCI handle as retrieved by *ti_sci_get_handle
92  * -id:         Device Identifier
93  *
94  * Request for the device - NOTE: the client MUST maintain integrity of
95  * usage count by balancing get_device with put_device. No refcounting is
96  * managed by driver for that purpose.
97  */
98 struct ti_sci_dev_ops {
99         int (*get_device)(const struct ti_sci_handle *handle, u32 id);
100         int (*get_device_exclusive)(const struct ti_sci_handle *handle, u32 id);
101         int (*idle_device)(const struct ti_sci_handle *handle, u32 id);
102         int (*idle_device_exclusive)(const struct ti_sci_handle *handle,
103                                      u32 id);
104         int (*put_device)(const struct ti_sci_handle *handle, u32 id);
105         int (*is_valid)(const struct ti_sci_handle *handle, u32 id);
106         int (*get_context_loss_count)(const struct ti_sci_handle *handle,
107                                       u32 id, u32 *count);
108         int (*is_idle)(const struct ti_sci_handle *handle, u32 id,
109                        bool *requested_state);
110         int (*is_stop)(const struct ti_sci_handle *handle, u32 id,
111                        bool *req_state, bool *current_state);
112         int (*is_on)(const struct ti_sci_handle *handle, u32 id,
113                      bool *req_state, bool *current_state);
114         int (*is_transitioning)(const struct ti_sci_handle *handle, u32 id,
115                                 bool *current_state);
116         int (*set_device_resets)(const struct ti_sci_handle *handle, u32 id,
117                                  u32 reset_state);
118         int (*get_device_resets)(const struct ti_sci_handle *handle, u32 id,
119                                  u32 *reset_state);
120 };
121
122 /**
123  * struct ti_sci_clk_ops - Clock control operations
124  * @get_clock:  Request for activation of clock and manage by processor
125  *              - needs_ssc: 'true' if Spread Spectrum clock is desired.
126  *              - can_change_freq: 'true' if frequency change is desired.
127  *              - enable_input_term: 'true' if input termination is desired.
128  * @idle_clock: Request for Idling a clock managed by processor
129  * @put_clock:  Release the clock to be auto managed by TISCI
130  * @is_auto:    Is the clock being auto managed
131  *              - req_state: state indicating if the clock is auto managed
132  * @is_on:      Is the clock ON
133  *              - req_state: if the clock is requested to be forced ON
134  *              - current_state: if the clock is currently ON
135  * @is_off:     Is the clock OFF
136  *              - req_state: if the clock is requested to be forced OFF
137  *              - current_state: if the clock is currently Gated
138  * @set_parent: Set the clock source of a specific device clock
139  *              - parent_id: Parent clock identifier to set.
140  * @get_parent: Get the current clock source of a specific device clock
141  *              - parent_id: Parent clock identifier which is the parent.
142  * @get_num_parents: Get the number of parents of the current clock source
143  *              - num_parents: returns the number of parent clocks.
144  * @get_best_match_freq: Find a best matching frequency for a frequency
145  *              range.
146  *              - match_freq: Best matching frequency in Hz.
147  * @set_freq:   Set the Clock frequency
148  * @get_freq:   Get the Clock frequency
149  *              - current_freq: Frequency in Hz that the clock is at.
150  *
151  * NOTE: for all these functions, the following parameters are generic in
152  * nature:
153  * -handle:     Pointer to TISCI handle as retrieved by *ti_sci_get_handle
154  * -did:        Device identifier this request is for
155  * -cid:        Clock identifier for the device for this request.
156  *              Each device has it's own set of clock inputs. This indexes
157  *              which clock input to modify.
158  * -min_freq:   The minimum allowable frequency in Hz. This is the minimum
159  *              allowable programmed frequency and does not account for clock
160  *              tolerances and jitter.
161  * -target_freq: The target clock frequency in Hz. A frequency will be
162  *              processed as close to this target frequency as possible.
163  * -max_freq:   The maximum allowable frequency in Hz. This is the maximum
164  *              allowable programmed frequency and does not account for clock
165  *              tolerances and jitter.
166  *
167  * Request for the clock - NOTE: the client MUST maintain integrity of
168  * usage count by balancing get_clock with put_clock. No refcounting is
169  * managed by driver for that purpose.
170  */
171 struct ti_sci_clk_ops {
172         int (*get_clock)(const struct ti_sci_handle *handle, u32 did, u32 cid,
173                          bool needs_ssc, bool can_change_freq,
174                          bool enable_input_term);
175         int (*idle_clock)(const struct ti_sci_handle *handle, u32 did, u32 cid);
176         int (*put_clock)(const struct ti_sci_handle *handle, u32 did, u32 cid);
177         int (*is_auto)(const struct ti_sci_handle *handle, u32 did, u32 cid,
178                        bool *req_state);
179         int (*is_on)(const struct ti_sci_handle *handle, u32 did, u32 cid,
180                      bool *req_state, bool *current_state);
181         int (*is_off)(const struct ti_sci_handle *handle, u32 did, u32 cid,
182                       bool *req_state, bool *current_state);
183         int (*set_parent)(const struct ti_sci_handle *handle, u32 did, u32 cid,
184                           u32 parent_id);
185         int (*get_parent)(const struct ti_sci_handle *handle, u32 did, u32 cid,
186                           u32 *parent_id);
187         int (*get_num_parents)(const struct ti_sci_handle *handle, u32 did,
188                                u32 cid, u32 *num_parents);
189         int (*get_best_match_freq)(const struct ti_sci_handle *handle, u32 did,
190                                    u32 cid, u64 min_freq, u64 target_freq,
191                                    u64 max_freq, u64 *match_freq);
192         int (*set_freq)(const struct ti_sci_handle *handle, u32 did, u32 cid,
193                         u64 min_freq, u64 target_freq, u64 max_freq);
194         int (*get_freq)(const struct ti_sci_handle *handle, u32 did, u32 cid,
195                         u64 *current_freq);
196 };
197
198 /**
199  * struct ti_sci_rm_core_ops - Resource management core operations
200  * @get_range:          Get a range of resources belonging to ti sci host.
201  * @get_rage_from_shost:        Get a range of resources belonging to
202  *                              specified host id.
203  *                      - s_host: Host processing entity to which the
204  *                                resources are allocated
205  *
206  * NOTE: for these functions, all the parameters are consolidated and defined
207  * as below:
208  * - handle:    Pointer to TISCI handle as retrieved by *ti_sci_get_handle
209  * - dev_id:    TISCI device ID.
210  * - subtype:   Resource assignment subtype that is being requested
211  *              from the given device.
212  * - range_start:       Start index of the resource range
213  * - range_end:         Number of resources in the range
214  */
215 struct ti_sci_rm_core_ops {
216         int (*get_range)(const struct ti_sci_handle *handle, u32 dev_id,
217                          u8 subtype, u16 *range_start, u16 *range_num);
218         int (*get_range_from_shost)(const struct ti_sci_handle *handle,
219                                     u32 dev_id, u8 subtype, u8 s_host,
220                                     u16 *range_start, u16 *range_num);
221 };
222
223 #define TI_SCI_RESASG_SUBTYPE_IR_OUTPUT         0
224 #define TI_SCI_RESASG_SUBTYPE_IA_VINT           0xa
225 #define TI_SCI_RESASG_SUBTYPE_GLOBAL_EVENT_SEVT 0xd
226 /**
227  * struct ti_sci_rm_irq_ops: IRQ management operations
228  * @set_irq:            Set an IRQ route between the requested source
229  *                      and destination
230  * @set_event_map:      Set an Event based peripheral irq to Interrupt
231  *                      Aggregator.
232  * @free_irq:           Free an IRQ route between the requested source
233  *                      and destination.
234  * @free_event_map:     Free an event based peripheral irq to Interrupt
235  *                      Aggregator.
236  */
237 struct ti_sci_rm_irq_ops {
238         int (*set_irq)(const struct ti_sci_handle *handle, u16 src_id,
239                        u16 src_index, u16 dst_id, u16 dst_host_irq);
240         int (*set_event_map)(const struct ti_sci_handle *handle, u16 src_id,
241                              u16 src_index, u16 ia_id, u16 vint,
242                              u16 global_event, u8 vint_status_bit);
243         int (*free_irq)(const struct ti_sci_handle *handle, u16 src_id,
244                         u16 src_index, u16 dst_id, u16 dst_host_irq);
245         int (*free_event_map)(const struct ti_sci_handle *handle, u16 src_id,
246                               u16 src_index, u16 ia_id, u16 vint,
247                               u16 global_event, u8 vint_status_bit);
248 };
249
250 /* RA config.addr_lo parameter is valid for RM ring configure TI_SCI message */
251 #define TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID  BIT(0)
252 /* RA config.addr_hi parameter is valid for RM ring configure TI_SCI message */
253 #define TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID  BIT(1)
254  /* RA config.count parameter is valid for RM ring configure TI_SCI message */
255 #define TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID    BIT(2)
256 /* RA config.mode parameter is valid for RM ring configure TI_SCI message */
257 #define TI_SCI_MSG_VALUE_RM_RING_MODE_VALID     BIT(3)
258 /* RA config.size parameter is valid for RM ring configure TI_SCI message */
259 #define TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID     BIT(4)
260 /* RA config.order_id parameter is valid for RM ring configure TISCI message */
261 #define TI_SCI_MSG_VALUE_RM_RING_ORDER_ID_VALID BIT(5)
262
263 #define TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER \
264         (TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID | \
265         TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID | \
266         TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID | \
267         TI_SCI_MSG_VALUE_RM_RING_MODE_VALID | \
268         TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID)
269
270 /**
271  * struct ti_sci_rm_ringacc_ops - Ring Accelerator Management operations
272  * @config: configure the SoC Navigator Subsystem Ring Accelerator ring
273  * @get_config: get the SoC Navigator Subsystem Ring Accelerator ring
274  *              configuration
275  */
276 struct ti_sci_rm_ringacc_ops {
277         int (*config)(const struct ti_sci_handle *handle,
278                       u32 valid_params, u16 nav_id, u16 index,
279                       u32 addr_lo, u32 addr_hi, u32 count, u8 mode,
280                       u8 size, u8 order_id
281         );
282         int (*get_config)(const struct ti_sci_handle *handle,
283                           u32 nav_id, u32 index, u8 *mode,
284                           u32 *addr_lo, u32 *addr_hi, u32 *count,
285                           u8 *size, u8 *order_id);
286 };
287
288 /**
289  * struct ti_sci_rm_psil_ops - PSI-L thread operations
290  * @pair: pair PSI-L source thread to a destination thread.
291  *      If the src_thread is mapped to UDMA tchan, the corresponding channel's
292  *      TCHAN_THRD_ID register is updated.
293  *      If the dst_thread is mapped to UDMA rchan, the corresponding channel's
294  *      RCHAN_THRD_ID register is updated.
295  * @unpair: unpair PSI-L source thread from a destination thread.
296  *      If the src_thread is mapped to UDMA tchan, the corresponding channel's
297  *      TCHAN_THRD_ID register is cleared.
298  *      If the dst_thread is mapped to UDMA rchan, the corresponding channel's
299  *      RCHAN_THRD_ID register is cleared.
300  */
301 struct ti_sci_rm_psil_ops {
302         int (*pair)(const struct ti_sci_handle *handle, u32 nav_id,
303                     u32 src_thread, u32 dst_thread);
304         int (*unpair)(const struct ti_sci_handle *handle, u32 nav_id,
305                       u32 src_thread, u32 dst_thread);
306 };
307
308 /* UDMAP channel types */
309 #define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR              2
310 #define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR_SB           3       /* RX only */
311 #define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBRR             10
312 #define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBVR             11
313 #define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBRR       12
314 #define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBVR       13
315
316 #define TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST               0
317 #define TI_SCI_RM_UDMAP_RX_FLOW_DESC_MONO               2
318
319 #define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES        1
320 #define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_128_BYTES       2
321 #define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_256_BYTES       3
322
323 /* UDMAP TX/RX channel valid_params common declarations */
324 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PAUSE_ON_ERR_VALID         BIT(0)
325 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID                BIT(1)
326 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CHAN_TYPE_VALID            BIT(2)
327 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_FETCH_SIZE_VALID           BIT(3)
328 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CQ_QNUM_VALID              BIT(4)
329 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PRIORITY_VALID             BIT(5)
330 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_QOS_VALID                  BIT(6)
331 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ORDER_ID_VALID             BIT(7)
332 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_SCHED_PRIORITY_VALID       BIT(8)
333 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_BURST_SIZE_VALID           BIT(14)
334
335 /**
336  * Configures a Navigator Subsystem UDMAP transmit channel
337  *
338  * Configures a Navigator Subsystem UDMAP transmit channel registers.
339  * See @ti_sci_msg_rm_udmap_tx_ch_cfg_req
340  */
341 struct ti_sci_msg_rm_udmap_tx_ch_cfg {
342         u32 valid_params;
343 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_EINFO_VALID        BIT(9)
344 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_PSWORDS_VALID      BIT(10)
345 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_SUPR_TDPKT_VALID        BIT(11)
346 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_CREDIT_COUNT_VALID      BIT(12)
347 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FDEPTH_VALID            BIT(13)
348         u16 nav_id;
349         u16 index;
350         u8 tx_pause_on_err;
351         u8 tx_filt_einfo;
352         u8 tx_filt_pswords;
353         u8 tx_atype;
354         u8 tx_chan_type;
355         u8 tx_supr_tdpkt;
356         u16 tx_fetch_size;
357         u8 tx_credit_count;
358         u16 txcq_qnum;
359         u8 tx_priority;
360         u8 tx_qos;
361         u8 tx_orderid;
362         u16 fdepth;
363         u8 tx_sched_priority;
364         u8 tx_burst_size;
365 };
366
367 /**
368  * Configures a Navigator Subsystem UDMAP receive channel
369  *
370  * Configures a Navigator Subsystem UDMAP receive channel registers.
371  * See @ti_sci_msg_rm_udmap_rx_ch_cfg_req
372  */
373 struct ti_sci_msg_rm_udmap_rx_ch_cfg {
374         u32 valid_params;
375 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_START_VALID      BIT(9)
376 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_CNT_VALID        BIT(10)
377 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_SHORT_VALID      BIT(11)
378 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_LONG_VALID       BIT(12)
379         u16 nav_id;
380         u16 index;
381         u16 rx_fetch_size;
382         u16 rxcq_qnum;
383         u8 rx_priority;
384         u8 rx_qos;
385         u8 rx_orderid;
386         u8 rx_sched_priority;
387         u16 flowid_start;
388         u16 flowid_cnt;
389         u8 rx_pause_on_err;
390         u8 rx_atype;
391         u8 rx_chan_type;
392         u8 rx_ignore_short;
393         u8 rx_ignore_long;
394         u8 rx_burst_size;
395 };
396
397 /**
398  * Configures a Navigator Subsystem UDMAP receive flow
399  *
400  * Configures a Navigator Subsystem UDMAP receive flow's registers.
401  * See @tis_ci_msg_rm_udmap_flow_cfg_req
402  */
403 struct ti_sci_msg_rm_udmap_flow_cfg {
404         u32 valid_params;
405 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_EINFO_PRESENT_VALID      BIT(0)
406 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PSINFO_PRESENT_VALID     BIT(1)
407 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_ERROR_HANDLING_VALID     BIT(2)
408 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DESC_TYPE_VALID          BIT(3)
409 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SOP_OFFSET_VALID         BIT(4)
410 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_QNUM_VALID          BIT(5)
411 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_VALID         BIT(6)
412 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_VALID         BIT(7)
413 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_VALID        BIT(8)
414 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_VALID        BIT(9)
415 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_SEL_VALID     BIT(10)
416 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_SEL_VALID     BIT(11)
417 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_SEL_VALID    BIT(12)
418 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_SEL_VALID    BIT(13)
419 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ0_SZ0_QNUM_VALID      BIT(14)
420 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ1_QNUM_VALID          BIT(15)
421 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ2_QNUM_VALID          BIT(16)
422 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ3_QNUM_VALID          BIT(17)
423 #define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PS_LOCATION_VALID        BIT(18)
424         u16 nav_id;
425         u16 flow_index;
426         u8 rx_einfo_present;
427         u8 rx_psinfo_present;
428         u8 rx_error_handling;
429         u8 rx_desc_type;
430         u16 rx_sop_offset;
431         u16 rx_dest_qnum;
432         u8 rx_src_tag_hi;
433         u8 rx_src_tag_lo;
434         u8 rx_dest_tag_hi;
435         u8 rx_dest_tag_lo;
436         u8 rx_src_tag_hi_sel;
437         u8 rx_src_tag_lo_sel;
438         u8 rx_dest_tag_hi_sel;
439         u8 rx_dest_tag_lo_sel;
440         u16 rx_fdq0_sz0_qnum;
441         u16 rx_fdq1_qnum;
442         u16 rx_fdq2_qnum;
443         u16 rx_fdq3_qnum;
444         u8 rx_ps_location;
445 };
446
447 /**
448  * struct ti_sci_rm_udmap_ops - UDMA Management operations
449  * @tx_ch_cfg: configure SoC Navigator Subsystem UDMA transmit channel.
450  * @rx_ch_cfg: configure SoC Navigator Subsystem UDMA receive channel.
451  * @rx_flow_cfg1: configure SoC Navigator Subsystem UDMA receive flow.
452  */
453 struct ti_sci_rm_udmap_ops {
454         int (*tx_ch_cfg)(const struct ti_sci_handle *handle,
455                          const struct ti_sci_msg_rm_udmap_tx_ch_cfg *params);
456         int (*rx_ch_cfg)(const struct ti_sci_handle *handle,
457                          const struct ti_sci_msg_rm_udmap_rx_ch_cfg *params);
458         int (*rx_flow_cfg)(const struct ti_sci_handle *handle,
459                            const struct ti_sci_msg_rm_udmap_flow_cfg *params);
460 };
461
462 /**
463  * struct ti_sci_proc_ops - Processor Control operations
464  * @request:    Request to control a physical processor. The requesting host
465  *              should be in the processor access list
466  * @release:    Relinquish a physical processor control
467  * @handover:   Handover a physical processor control to another host
468  *              in the permitted list
469  * @set_config: Set base configuration of a processor
470  * @set_control: Setup limited control flags in specific cases
471  * @get_status: Get the state of physical processor
472  *
473  * NOTE: The following paramteres are generic in nature for all these ops,
474  * -handle:     Pointer to TI SCI handle as retrieved by *ti_sci_get_handle
475  * -pid:        Processor ID
476  * -hid:        Host ID
477  */
478 struct ti_sci_proc_ops {
479         int (*request)(const struct ti_sci_handle *handle, u8 pid);
480         int (*release)(const struct ti_sci_handle *handle, u8 pid);
481         int (*handover)(const struct ti_sci_handle *handle, u8 pid, u8 hid);
482         int (*set_config)(const struct ti_sci_handle *handle, u8 pid,
483                           u64 boot_vector, u32 cfg_set, u32 cfg_clr);
484         int (*set_control)(const struct ti_sci_handle *handle, u8 pid,
485                            u32 ctrl_set, u32 ctrl_clr);
486         int (*get_status)(const struct ti_sci_handle *handle, u8 pid,
487                           u64 *boot_vector, u32 *cfg_flags, u32 *ctrl_flags,
488                           u32 *status_flags);
489 };
490
491 /**
492  * struct ti_sci_ops - Function support for TI SCI
493  * @dev_ops:    Device specific operations
494  * @clk_ops:    Clock specific operations
495  * @rm_core_ops:        Resource management core operations.
496  * @rm_irq_ops:         IRQ management specific operations
497  * @proc_ops:   Processor Control specific operations
498  */
499 struct ti_sci_ops {
500         struct ti_sci_core_ops core_ops;
501         struct ti_sci_dev_ops dev_ops;
502         struct ti_sci_clk_ops clk_ops;
503         struct ti_sci_rm_core_ops rm_core_ops;
504         struct ti_sci_rm_irq_ops rm_irq_ops;
505         struct ti_sci_rm_ringacc_ops rm_ring_ops;
506         struct ti_sci_rm_psil_ops rm_psil_ops;
507         struct ti_sci_rm_udmap_ops rm_udmap_ops;
508         struct ti_sci_proc_ops proc_ops;
509 };
510
511 /**
512  * struct ti_sci_handle - Handle returned to TI SCI clients for usage.
513  * @version:    structure containing version information
514  * @ops:        operations that are made available to TI SCI clients
515  */
516 struct ti_sci_handle {
517         struct ti_sci_version_info version;
518         struct ti_sci_ops ops;
519 };
520
521 #define TI_SCI_RESOURCE_NULL    0xffff
522
523 /**
524  * struct ti_sci_resource_desc - Description of TI SCI resource instance range.
525  * @start:      Start index of the resource.
526  * @num:        Number of resources.
527  * @res_map:    Bitmap to manage the allocation of these resources.
528  */
529 struct ti_sci_resource_desc {
530         u16 start;
531         u16 num;
532         unsigned long *res_map;
533 };
534
535 /**
536  * struct ti_sci_resource - Structure representing a resource assigned
537  *                          to a device.
538  * @sets:       Number of sets available from this resource type
539  * @lock:       Lock to guard the res map in each set.
540  * @desc:       Array of resource descriptors.
541  */
542 struct ti_sci_resource {
543         u16 sets;
544         raw_spinlock_t lock;
545         struct ti_sci_resource_desc *desc;
546 };
547
548 #if IS_ENABLED(CONFIG_TI_SCI_PROTOCOL)
549 const struct ti_sci_handle *ti_sci_get_handle(struct device *dev);
550 int ti_sci_put_handle(const struct ti_sci_handle *handle);
551 const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev);
552 const struct ti_sci_handle *ti_sci_get_by_phandle(struct device_node *np,
553                                                   const char *property);
554 const struct ti_sci_handle *devm_ti_sci_get_by_phandle(struct device *dev,
555                                                        const char *property);
556 u16 ti_sci_get_free_resource(struct ti_sci_resource *res);
557 void ti_sci_release_resource(struct ti_sci_resource *res, u16 id);
558 u32 ti_sci_get_num_resources(struct ti_sci_resource *res);
559 struct ti_sci_resource *
560 devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
561                             struct device *dev, u32 dev_id, char *of_prop);
562 struct ti_sci_resource *
563 devm_ti_sci_get_resource(const struct ti_sci_handle *handle, struct device *dev,
564                          u32 dev_id, u32 sub_type);
565
566 #else   /* CONFIG_TI_SCI_PROTOCOL */
567
568 static inline const struct ti_sci_handle *ti_sci_get_handle(struct device *dev)
569 {
570         return ERR_PTR(-EINVAL);
571 }
572
573 static inline int ti_sci_put_handle(const struct ti_sci_handle *handle)
574 {
575         return -EINVAL;
576 }
577
578 static inline
579 const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev)
580 {
581         return ERR_PTR(-EINVAL);
582 }
583
584 static inline
585 const struct ti_sci_handle *ti_sci_get_by_phandle(struct device_node *np,
586                                                   const char *property)
587 {
588         return ERR_PTR(-EINVAL);
589 }
590
591 static inline
592 const struct ti_sci_handle *devm_ti_sci_get_by_phandle(struct device *dev,
593                                                        const char *property)
594 {
595         return ERR_PTR(-EINVAL);
596 }
597
598 static inline u16 ti_sci_get_free_resource(struct ti_sci_resource *res)
599 {
600         return TI_SCI_RESOURCE_NULL;
601 }
602
603 static inline void ti_sci_release_resource(struct ti_sci_resource *res, u16 id)
604 {
605 }
606
607 static inline u32 ti_sci_get_num_resources(struct ti_sci_resource *res)
608 {
609         return 0;
610 }
611
612 static inline struct ti_sci_resource *
613 devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
614                             struct device *dev, u32 dev_id, char *of_prop)
615 {
616         return ERR_PTR(-EINVAL);
617 }
618
619 static inline struct ti_sci_resource *
620 devm_ti_sci_get_resource(const struct ti_sci_handle *handle, struct device *dev,
621                          u32 dev_id, u32 sub_type);
622 {
623         return ERR_PTR(-EINVAL);
624 }
625 #endif  /* CONFIG_TI_SCI_PROTOCOL */
626
627 #endif  /* __TISCI_PROTOCOL_H */