Merge tag 'fbdev-for-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
[linux-block.git] / include / linux / nvmem-provider.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * nvmem framework provider.
4  *
5  * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
6  * Copyright (C) 2013 Maxime Ripard <maxime.ripard@free-electrons.com>
7  */
8
9 #ifndef _LINUX_NVMEM_PROVIDER_H
10 #define _LINUX_NVMEM_PROVIDER_H
11
12 #include <linux/device/driver.h>
13 #include <linux/err.h>
14 #include <linux/errno.h>
15 #include <linux/gpio/consumer.h>
16
17 struct nvmem_device;
18 typedef int (*nvmem_reg_read_t)(void *priv, unsigned int offset,
19                                 void *val, size_t bytes);
20 typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset,
21                                  void *val, size_t bytes);
22 /* used for vendor specific post processing of cell data */
23 typedef int (*nvmem_cell_post_process_t)(void *priv, const char *id, int index,
24                                          unsigned int offset, void *buf,
25                                          size_t bytes);
26
27 enum nvmem_type {
28         NVMEM_TYPE_UNKNOWN = 0,
29         NVMEM_TYPE_EEPROM,
30         NVMEM_TYPE_OTP,
31         NVMEM_TYPE_BATTERY_BACKED,
32         NVMEM_TYPE_FRAM,
33 };
34
35 #define NVMEM_DEVID_NONE        (-1)
36 #define NVMEM_DEVID_AUTO        (-2)
37
38 /**
39  * struct nvmem_keepout - NVMEM register keepout range.
40  *
41  * @start:      The first byte offset to avoid.
42  * @end:        One beyond the last byte offset to avoid.
43  * @value:      The byte to fill reads with for this region.
44  */
45 struct nvmem_keepout {
46         unsigned int start;
47         unsigned int end;
48         unsigned char value;
49 };
50
51 /**
52  * struct nvmem_cell_info - NVMEM cell description
53  * @name:       Name.
54  * @offset:     Offset within the NVMEM device.
55  * @raw_len:    Length of raw data (without post processing).
56  * @bytes:      Length of the cell.
57  * @bit_offset: Bit offset if cell is smaller than a byte.
58  * @nbits:      Number of bits.
59  * @np:         Optional device_node pointer.
60  * @read_post_process:  Callback for optional post processing of cell data
61  *                      on reads.
62  * @priv:       Opaque data passed to the read_post_process hook.
63  */
64 struct nvmem_cell_info {
65         const char              *name;
66         unsigned int            offset;
67         size_t                  raw_len;
68         unsigned int            bytes;
69         unsigned int            bit_offset;
70         unsigned int            nbits;
71         struct device_node      *np;
72         nvmem_cell_post_process_t read_post_process;
73         void                    *priv;
74 };
75
76 /**
77  * struct nvmem_config - NVMEM device configuration
78  *
79  * @dev:        Parent device.
80  * @name:       Optional name.
81  * @id:         Optional device ID used in full name. Ignored if name is NULL.
82  * @owner:      Pointer to exporter module. Used for refcounting.
83  * @cells:      Optional array of pre-defined NVMEM cells.
84  * @ncells:     Number of elements in cells.
85  * @keepout:    Optional array of keepout ranges (sorted ascending by start).
86  * @nkeepout:   Number of elements in the keepout array.
87  * @type:       Type of the nvmem storage
88  * @read_only:  Device is read-only.
89  * @root_only:  Device is accessibly to root only.
90  * @of_node:    If given, this will be used instead of the parent's of_node.
91  * @no_of_node: Device should not use the parent's of_node even if it's !NULL.
92  * @reg_read:   Callback to read data.
93  * @reg_write:  Callback to write data.
94  * @size:       Device size.
95  * @word_size:  Minimum read/write access granularity.
96  * @stride:     Minimum read/write access stride.
97  * @priv:       User context passed to read/write callbacks.
98  * @ignore_wp:  Write Protect pin is managed by the provider.
99  * @layout:     Fixed layout associated with this nvmem device.
100  *
101  * Note: A default "nvmem<id>" name will be assigned to the device if
102  * no name is specified in its configuration. In such case "<id>" is
103  * generated with ida_simple_get() and provided id field is ignored.
104  *
105  * Note: Specifying name and setting id to -1 implies a unique device
106  * whose name is provided as-is (kept unaltered).
107  */
108 struct nvmem_config {
109         struct device           *dev;
110         const char              *name;
111         int                     id;
112         struct module           *owner;
113         const struct nvmem_cell_info    *cells;
114         int                     ncells;
115         const struct nvmem_keepout *keepout;
116         unsigned int            nkeepout;
117         enum nvmem_type         type;
118         bool                    read_only;
119         bool                    root_only;
120         bool                    ignore_wp;
121         struct nvmem_layout     *layout;
122         struct device_node      *of_node;
123         bool                    no_of_node;
124         nvmem_reg_read_t        reg_read;
125         nvmem_reg_write_t       reg_write;
126         int     size;
127         int     word_size;
128         int     stride;
129         void    *priv;
130         /* To be only used by old driver/misc/eeprom drivers */
131         bool                    compat;
132         struct device           *base_dev;
133 };
134
135 /**
136  * struct nvmem_cell_table - NVMEM cell definitions for given provider
137  *
138  * @nvmem_name:         Provider name.
139  * @cells:              Array of cell definitions.
140  * @ncells:             Number of cell definitions in the array.
141  * @node:               List node.
142  *
143  * This structure together with related helper functions is provided for users
144  * that don't can't access the nvmem provided structure but wish to register
145  * cell definitions for it e.g. board files registering an EEPROM device.
146  */
147 struct nvmem_cell_table {
148         const char              *nvmem_name;
149         const struct nvmem_cell_info    *cells;
150         size_t                  ncells;
151         struct list_head        node;
152 };
153
154 /**
155  * struct nvmem_layout - NVMEM layout definitions
156  *
157  * @name:               Layout name.
158  * @of_match_table:     Open firmware match table.
159  * @add_cells:          Will be called if a nvmem device is found which
160  *                      has this layout. The function will add layout
161  *                      specific cells with nvmem_add_one_cell().
162  * @fixup_cell_info:    Will be called before a cell is added. Can be
163  *                      used to modify the nvmem_cell_info.
164  * @owner:              Pointer to struct module.
165  * @node:               List node.
166  *
167  * A nvmem device can hold a well defined structure which can just be
168  * evaluated during runtime. For example a TLV list, or a list of "name=val"
169  * pairs. A nvmem layout can parse the nvmem device and add appropriate
170  * cells.
171  */
172 struct nvmem_layout {
173         const char *name;
174         const struct of_device_id *of_match_table;
175         int (*add_cells)(struct device *dev, struct nvmem_device *nvmem,
176                          struct nvmem_layout *layout);
177         void (*fixup_cell_info)(struct nvmem_device *nvmem,
178                                 struct nvmem_layout *layout,
179                                 struct nvmem_cell_info *cell);
180
181         /* private */
182         struct module *owner;
183         struct list_head node;
184 };
185
186 #if IS_ENABLED(CONFIG_NVMEM)
187
188 struct nvmem_device *nvmem_register(const struct nvmem_config *cfg);
189 void nvmem_unregister(struct nvmem_device *nvmem);
190
191 struct nvmem_device *devm_nvmem_register(struct device *dev,
192                                          const struct nvmem_config *cfg);
193
194 void nvmem_add_cell_table(struct nvmem_cell_table *table);
195 void nvmem_del_cell_table(struct nvmem_cell_table *table);
196
197 int nvmem_add_one_cell(struct nvmem_device *nvmem,
198                        const struct nvmem_cell_info *info);
199
200 int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner);
201 #define nvmem_layout_register(layout) \
202         __nvmem_layout_register(layout, THIS_MODULE)
203 void nvmem_layout_unregister(struct nvmem_layout *layout);
204
205 const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
206                                         struct nvmem_layout *layout);
207
208 #else
209
210 static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c)
211 {
212         return ERR_PTR(-EOPNOTSUPP);
213 }
214
215 static inline void nvmem_unregister(struct nvmem_device *nvmem) {}
216
217 static inline struct nvmem_device *
218 devm_nvmem_register(struct device *dev, const struct nvmem_config *c)
219 {
220         return nvmem_register(c);
221 }
222
223 static inline void nvmem_add_cell_table(struct nvmem_cell_table *table) {}
224 static inline void nvmem_del_cell_table(struct nvmem_cell_table *table) {}
225 static inline int nvmem_add_one_cell(struct nvmem_device *nvmem,
226                                      const struct nvmem_cell_info *info)
227 {
228         return -EOPNOTSUPP;
229 }
230
231 static inline int nvmem_layout_register(struct nvmem_layout *layout)
232 {
233         return -EOPNOTSUPP;
234 }
235
236 static inline void nvmem_layout_unregister(struct nvmem_layout *layout) {}
237
238 static inline const void *
239 nvmem_layout_get_match_data(struct nvmem_device *nvmem,
240                             struct nvmem_layout *layout)
241 {
242         return NULL;
243 }
244
245 #endif /* CONFIG_NVMEM */
246
247 #define module_nvmem_layout_driver(__layout_driver)             \
248         module_driver(__layout_driver, nvmem_layout_register,   \
249                       nvmem_layout_unregister)
250
251 #endif  /* ifndef _LINUX_NVMEM_PROVIDER_H */