Merge branch 'master' of ssh://infradead/~/public_git/wireless-next into for-davem
[linux-2.6-block.git] / include / linux / nl80211.h
1 #ifndef __LINUX_NL80211_H
2 #define __LINUX_NL80211_H
3 /*
4  * 802.11 netlink interface public header
5  *
6  * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
7  * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
8  * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
9  * Copyright 2008 Michael Buesch <m@bues.ch>
10  * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
11  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
12  * Copyright 2008 Colin McCabe <colin@cozybit.com>
13  *
14  * Permission to use, copy, modify, and/or distribute this software for any
15  * purpose with or without fee is hereby granted, provided that the above
16  * copyright notice and this permission notice appear in all copies.
17  *
18  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
19  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
20  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
21  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
22  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
23  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
24  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
25  *
26  */
27
28 #include <linux/types.h>
29
30 /**
31  * DOC: Station handling
32  *
33  * Stations are added per interface, but a special case exists with VLAN
34  * interfaces. When a station is bound to an AP interface, it may be moved
35  * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
36  * The station is still assumed to belong to the AP interface it was added
37  * to.
38  *
39  * TODO: need more info?
40  */
41
42 /**
43  * DOC: Frame transmission/registration support
44  *
45  * Frame transmission and registration support exists to allow userspace
46  * management entities such as wpa_supplicant react to management frames
47  * that are not being handled by the kernel. This includes, for example,
48  * certain classes of action frames that cannot be handled in the kernel
49  * for various reasons.
50  *
51  * Frame registration is done on a per-interface basis and registrations
52  * cannot be removed other than by closing the socket. It is possible to
53  * specify a registration filter to register, for example, only for a
54  * certain type of action frame. In particular with action frames, those
55  * that userspace registers for will not be returned as unhandled by the
56  * driver, so that the registered application has to take responsibility
57  * for doing that.
58  *
59  * The type of frame that can be registered for is also dependent on the
60  * driver and interface type. The frame types are advertised in wiphy
61  * attributes so applications know what to expect.
62  *
63  * NOTE: When an interface changes type while registrations are active,
64  *       these registrations are ignored until the interface type is
65  *       changed again. This means that changing the interface type can
66  *       lead to a situation that couldn't otherwise be produced, but
67  *       any such registrations will be dormant in the sense that they
68  *       will not be serviced, i.e. they will not receive any frames.
69  *
70  * Frame transmission allows userspace to send for example the required
71  * responses to action frames. It is subject to some sanity checking,
72  * but many frames can be transmitted. When a frame was transmitted, its
73  * status is indicated to the sending socket.
74  *
75  * For more technical details, see the corresponding command descriptions
76  * below.
77  */
78
79 /**
80  * DOC: Virtual interface / concurrency capabilities
81  *
82  * Some devices are able to operate with virtual MACs, they can have
83  * more than one virtual interface. The capability handling for this
84  * is a bit complex though, as there may be a number of restrictions
85  * on the types of concurrency that are supported.
86  *
87  * To start with, each device supports the interface types listed in
88  * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
89  * types there no concurrency is implied.
90  *
91  * Once concurrency is desired, more attributes must be observed:
92  * To start with, since some interface types are purely managed in
93  * software, like the AP-VLAN type in mac80211 for example, there's
94  * an additional list of these, they can be added at any time and
95  * are only restricted by some semantic restrictions (e.g. AP-VLAN
96  * cannot be added without a corresponding AP interface). This list
97  * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
98  *
99  * Further, the list of supported combinations is exported. This is
100  * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
101  * it exports a list of "groups", and at any point in time the
102  * interfaces that are currently active must fall into any one of
103  * the advertised groups. Within each group, there are restrictions
104  * on the number of interfaces of different types that are supported
105  * and also the number of different channels, along with potentially
106  * some other restrictions. See &enum nl80211_if_combination_attrs.
107  *
108  * All together, these attributes define the concurrency of virtual
109  * interfaces that a given device supports.
110  */
111
112 /**
113  * enum nl80211_commands - supported nl80211 commands
114  *
115  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
116  *
117  * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
118  *      to get a list of all present wiphys.
119  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
120  *      %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
121  *      %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
122  *      %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
123  *      %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
124  *      and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
125  *      However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
126  *      instead, the support here is for backward compatibility only.
127  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
128  *      or rename notification. Has attributes %NL80211_ATTR_WIPHY and
129  *      %NL80211_ATTR_WIPHY_NAME.
130  * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
131  *      %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
132  *
133  * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
134  *      either a dump request on a %NL80211_ATTR_WIPHY or a specific get
135  *      on an %NL80211_ATTR_IFINDEX is supported.
136  * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
137  *      %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
138  * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
139  *      to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
140  *      %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
141  *      be sent from userspace to request creation of a new virtual interface,
142  *      then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
143  *      %NL80211_ATTR_IFNAME.
144  * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
145  *      %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
146  *      userspace to request deletion of a virtual interface, then requires
147  *      attribute %NL80211_ATTR_IFINDEX.
148  *
149  * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
150  *      by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
151  * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
152  *      %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
153  * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
154  *      %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
155  *      and %NL80211_ATTR_KEY_SEQ attributes.
156  * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
157  *      or %NL80211_ATTR_MAC.
158  *
159  * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a
160  *      %NL80222_CMD_NEW_BEACON message)
161  * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
162  *      using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
163  *      %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
164  *      Following attributes are provided for drivers that generate full Beacon
165  *      and Probe Response frames internally: %NL80211_ATTR_SSID,
166  *      %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
167  *      %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
168  *      %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
169  *      %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP,
170  *      %NL80211_ATTR_IE_ASSOC_RESP.
171  * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
172  *      parameters are like for %NL80211_CMD_SET_BEACON.
173  * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
174  *
175  * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
176  *      %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
177  * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
178  *      %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
179  * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
180  *      the interface identified by %NL80211_ATTR_IFINDEX.
181  * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
182  *      or, if no MAC address given, all stations, on the interface identified
183  *      by %NL80211_ATTR_IFINDEX.
184  *
185  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
186  *      destination %NL80211_ATTR_MAC on the interface identified by
187  *      %NL80211_ATTR_IFINDEX.
188  * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
189  *      destination %NL80211_ATTR_MAC on the interface identified by
190  *      %NL80211_ATTR_IFINDEX.
191  * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
192  *      %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
193  * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
194  *      %NL80211_ATTR_MAC.
195  * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
196  *      the interface identified by %NL80211_ATTR_IFINDEX.
197  * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
198  *      or, if no MAC address given, all mesh paths, on the interface identified
199  *      by %NL80211_ATTR_IFINDEX.
200  * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
201  *      %NL80211_ATTR_IFINDEX.
202  *
203  * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
204  *      regulatory domain.
205  * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
206  *      after being queried by the kernel. CRDA replies by sending a regulatory
207  *      domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
208  *      current alpha2 if it found a match. It also provides
209  *      NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
210  *      regulatory rule is a nested set of attributes  given by
211  *      %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
212  *      %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
213  *      %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
214  *      %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
215  * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
216  *      to the specified ISO/IEC 3166-1 alpha2 country code. The core will
217  *      store this as a valid request and then query userspace for it.
218  *
219  * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
220  *      interface identified by %NL80211_ATTR_IFINDEX
221  *
222  * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
223  *      interface identified by %NL80211_ATTR_IFINDEX
224  *
225  * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
226  *      interface is identified with %NL80211_ATTR_IFINDEX and the management
227  *      frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
228  *      added to the end of the specified management frame is specified with
229  *      %NL80211_ATTR_IE. If the command succeeds, the requested data will be
230  *      added to all specified management frames generated by
231  *      kernel/firmware/driver.
232  *      Note: This command has been removed and it is only reserved at this
233  *      point to avoid re-using existing command number. The functionality this
234  *      command was planned for has been provided with cleaner design with the
235  *      option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
236  *      NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
237  *      NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
238  *
239  * @NL80211_CMD_GET_SCAN: get scan results
240  * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
241  * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
242  *      NL80211_CMD_GET_SCAN and on the "scan" multicast group)
243  * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
244  *      partial scan results may be available
245  *
246  * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
247  *      intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
248  *      Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
249  *      are passed, they are used in the probe requests.  For
250  *      broadcast, a broadcast SSID must be passed (ie. an empty
251  *      string).  If no SSID is passed, no probe requests are sent and
252  *      a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES,
253  *      if passed, define which channels should be scanned; if not
254  *      passed, all channels allowed for the current regulatory domain
255  *      are used.  Extra IEs can also be passed from the userspace by
256  *      using the %NL80211_ATTR_IE attribute.
257  * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan.  Returns -ENOENT
258  *      if scheduled scan is not running.
259  * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
260  *      results available.
261  * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
262  *      stopped.  The driver may issue this event at any time during a
263  *      scheduled scan.  One reason for stopping the scan is if the hardware
264  *      does not support starting an association or a normal scan while running
265  *      a scheduled scan.  This event is also sent when the
266  *      %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
267  *      is brought down while a scheduled scan was running.
268  *
269  * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
270  *      or noise level
271  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
272  *      NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
273  *
274  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
275  *      has been changed and provides details of the request information
276  *      that caused the change such as who initiated the regulatory request
277  *      (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
278  *      (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
279  *      the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
280  *      %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
281  *      set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
282  *      %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
283  *      to (%NL80211_ATTR_REG_ALPHA2).
284  * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
285  *      has been found while world roaming thus enabling active scan or
286  *      any mode of operation that initiates TX (beacons) on a channel
287  *      where we would not have been able to do either before. As an example
288  *      if you are world roaming (regulatory domain set to world or if your
289  *      driver is using a custom world roaming regulatory domain) and while
290  *      doing a passive scan on the 5 GHz band you find an AP there (if not
291  *      on a DFS channel) you will now be able to actively scan for that AP
292  *      or use AP mode on your card on that same channel. Note that this will
293  *      never be used for channels 1-11 on the 2 GHz band as they are always
294  *      enabled world wide. This beacon hint is only sent if your device had
295  *      either disabled active scanning or beaconing on a channel. We send to
296  *      userspace the wiphy on which we removed a restriction from
297  *      (%NL80211_ATTR_WIPHY) and the channel on which this occurred
298  *      before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
299  *      the beacon hint was processed.
300  *
301  * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
302  *      This command is used both as a command (request to authenticate) and
303  *      as an event on the "mlme" multicast group indicating completion of the
304  *      authentication process.
305  *      When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
306  *      interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
307  *      BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
308  *      the SSID (mainly for association, but is included in authentication
309  *      request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
310  *      to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
311  *      is used to specify the authentication type. %NL80211_ATTR_IE is used to
312  *      define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
313  *      to be added to the frame.
314  *      When used as an event, this reports reception of an Authentication
315  *      frame in station and IBSS modes when the local MLME processed the
316  *      frame, i.e., it was for the local STA and was received in correct
317  *      state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
318  *      MLME SAP interface (kernel providing MLME, userspace SME). The
319  *      included %NL80211_ATTR_FRAME attribute contains the management frame
320  *      (including both the header and frame body, but not FCS). This event is
321  *      also used to indicate if the authentication attempt timed out. In that
322  *      case the %NL80211_ATTR_FRAME attribute is replaced with a
323  *      %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
324  *      pending authentication timed out).
325  * @NL80211_CMD_ASSOCIATE: association request and notification; like
326  *      NL80211_CMD_AUTHENTICATE but for Association and Reassociation
327  *      (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
328  *      MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
329  * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
330  *      NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
331  *      MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
332  *      primitives).
333  * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
334  *      NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
335  *      MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
336  *
337  * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
338  *      MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
339  *      event includes %NL80211_ATTR_MAC to describe the source MAC address of
340  *      the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
341  *      type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
342  *      %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
343  *      event matches with MLME-MICHAELMICFAILURE.indication() primitive
344  *
345  * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
346  *      FREQ attribute (for the initial frequency if no peer can be found)
347  *      and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
348  *      should be fixed rather than automatically determined. Can only be
349  *      executed on a network interface that is UP, and fixed BSSID/FREQ
350  *      may be rejected. Another optional parameter is the beacon interval,
351  *      given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
352  *      given defaults to 100 TU (102.4ms).
353  * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
354  *      determined by the network interface.
355  *
356  * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
357  *      to identify the device, and the TESTDATA blob attribute to pass through
358  *      to the driver.
359  *
360  * @NL80211_CMD_CONNECT: connection request and notification; this command
361  *      requests to connect to a specified network but without separating
362  *      auth and assoc steps. For this, you need to specify the SSID in a
363  *      %NL80211_ATTR_SSID attribute, and can optionally specify the association
364  *      IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
365  *      %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
366  *      %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
367  *      %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
368  *      It is also sent as an event, with the BSSID and response IEs when the
369  *      connection is established or failed to be established. This can be
370  *      determined by the STATUS_CODE attribute.
371  * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
372  *      sent as an event when the card/driver roamed by itself.
373  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
374  *      userspace that a connection was dropped by the AP or due to other
375  *      reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
376  *      %NL80211_ATTR_REASON_CODE attributes are used.
377  *
378  * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
379  *      associated with this wiphy must be down and will follow.
380  *
381  * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
382  *      channel for the specified amount of time. This can be used to do
383  *      off-channel operations like transmit a Public Action frame and wait for
384  *      a response while being associated to an AP on another channel.
385  *      %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
386  *      radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
387  *      frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
388  *      optionally used to specify additional channel parameters.
389  *      %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
390  *      to remain on the channel. This command is also used as an event to
391  *      notify when the requested duration starts (it may take a while for the
392  *      driver to schedule this time due to other concurrent needs for the
393  *      radio).
394  *      When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
395  *      that will be included with any events pertaining to this request;
396  *      the cookie is also used to cancel the request.
397  * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
398  *      pending remain-on-channel duration if the desired operation has been
399  *      completed prior to expiration of the originally requested duration.
400  *      %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
401  *      radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
402  *      uniquely identify the request.
403  *      This command is also used as an event to notify when a requested
404  *      remain-on-channel duration has expired.
405  *
406  * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
407  *      rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
408  *      and @NL80211_ATTR_TX_RATES the set of allowed rates.
409  *
410  * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
411  *      (via @NL80211_CMD_FRAME) for processing in userspace. This command
412  *      requires an interface index, a frame type attribute (optional for
413  *      backward compatibility reasons, if not given assumes action frames)
414  *      and a match attribute containing the first few bytes of the frame
415  *      that should match, e.g. a single byte for only a category match or
416  *      four bytes for vendor frames including the OUI. The registration
417  *      cannot be dropped, but is removed automatically when the netlink
418  *      socket is closed. Multiple registrations can be made.
419  * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
420  *      backward compatibility
421  * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
422  *      command is used both as a request to transmit a management frame and
423  *      as an event indicating reception of a frame that was not processed in
424  *      kernel code, but is for us (i.e., which may need to be processed in a
425  *      user space application). %NL80211_ATTR_FRAME is used to specify the
426  *      frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
427  *      optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
428  *      which channel the frame is to be transmitted or was received. If this
429  *      channel is not the current channel (remain-on-channel or the
430  *      operational channel) the device will switch to the given channel and
431  *      transmit the frame, optionally waiting for a response for the time
432  *      specified using %NL80211_ATTR_DURATION. When called, this operation
433  *      returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
434  *      TX status event pertaining to the TX request.
435  * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
436  *      command may be used with the corresponding cookie to cancel the wait
437  *      time if it is known that it is no longer necessary.
438  * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
439  * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
440  *      transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
441  *      the TX command and %NL80211_ATTR_FRAME includes the contents of the
442  *      frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
443  *      the frame.
444  * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
445  *      backward compatibility.
446  * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
447  *      is used to configure connection quality monitoring notification trigger
448  *      levels.
449  * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
450  *      command is used as an event to indicate the that a trigger level was
451  *      reached.
452  * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
453  *      and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
454  *      by %NL80211_ATTR_IFINDEX) shall operate on.
455  *      In case multiple channels are supported by the device, the mechanism
456  *      with which it switches channels is implementation-defined.
457  *      When a monitor interface is given, it can only switch channel while
458  *      no other interfaces are operating to avoid disturbing the operation
459  *      of any other interfaces, and other interfaces will again take
460  *      precedence when they are used.
461  *
462  * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
463  *
464  * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
465  *      mesh config parameters may be given.
466  * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
467  *      network is determined by the network interface.
468  *
469  * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
470  *      notification. This event is used to indicate that an unprotected
471  *      deauthentication frame was dropped when MFP is in use.
472  * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
473  *      notification. This event is used to indicate that an unprotected
474  *      disassociation frame was dropped when MFP is in use.
475  *
476  * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
477  *      beacon or probe response from a compatible mesh peer.  This is only
478  *      sent while no station information (sta_info) exists for the new peer
479  *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set.  On
480  *      reception of this notification, userspace may decide to create a new
481  *      station (@NL80211_CMD_NEW_STATION).  To stop this notification from
482  *      reoccurring, the userspace authentication daemon may want to create the
483  *      new station with the AUTHENTICATED flag unset and maybe change it later
484  *      depending on the authentication result.
485  *
486  * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
487  * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
488  *      Since wireless is more complex than wired ethernet, it supports
489  *      various triggers. These triggers can be configured through this
490  *      command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
491  *      more background information, see
492  *      http://wireless.kernel.org/en/users/Documentation/WoWLAN.
493  *
494  * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
495  *      the necessary information for supporting GTK rekey offload. This
496  *      feature is typically used during WoWLAN. The configuration data
497  *      is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
498  *      contains the data in sub-attributes). After rekeying happened,
499  *      this command may also be sent by the driver as an MLME event to
500  *      inform userspace of the new replay counter.
501  *
502  * @NL80211_CMD_MAX: highest used command number
503  * @__NL80211_CMD_AFTER_LAST: internal use
504  */
505 enum nl80211_commands {
506 /* don't change the order or add anything between, this is ABI! */
507         NL80211_CMD_UNSPEC,
508
509         NL80211_CMD_GET_WIPHY,          /* can dump */
510         NL80211_CMD_SET_WIPHY,
511         NL80211_CMD_NEW_WIPHY,
512         NL80211_CMD_DEL_WIPHY,
513
514         NL80211_CMD_GET_INTERFACE,      /* can dump */
515         NL80211_CMD_SET_INTERFACE,
516         NL80211_CMD_NEW_INTERFACE,
517         NL80211_CMD_DEL_INTERFACE,
518
519         NL80211_CMD_GET_KEY,
520         NL80211_CMD_SET_KEY,
521         NL80211_CMD_NEW_KEY,
522         NL80211_CMD_DEL_KEY,
523
524         NL80211_CMD_GET_BEACON,
525         NL80211_CMD_SET_BEACON,
526         NL80211_CMD_NEW_BEACON,
527         NL80211_CMD_DEL_BEACON,
528
529         NL80211_CMD_GET_STATION,
530         NL80211_CMD_SET_STATION,
531         NL80211_CMD_NEW_STATION,
532         NL80211_CMD_DEL_STATION,
533
534         NL80211_CMD_GET_MPATH,
535         NL80211_CMD_SET_MPATH,
536         NL80211_CMD_NEW_MPATH,
537         NL80211_CMD_DEL_MPATH,
538
539         NL80211_CMD_SET_BSS,
540
541         NL80211_CMD_SET_REG,
542         NL80211_CMD_REQ_SET_REG,
543
544         NL80211_CMD_GET_MESH_CONFIG,
545         NL80211_CMD_SET_MESH_CONFIG,
546
547         NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
548
549         NL80211_CMD_GET_REG,
550
551         NL80211_CMD_GET_SCAN,
552         NL80211_CMD_TRIGGER_SCAN,
553         NL80211_CMD_NEW_SCAN_RESULTS,
554         NL80211_CMD_SCAN_ABORTED,
555
556         NL80211_CMD_REG_CHANGE,
557
558         NL80211_CMD_AUTHENTICATE,
559         NL80211_CMD_ASSOCIATE,
560         NL80211_CMD_DEAUTHENTICATE,
561         NL80211_CMD_DISASSOCIATE,
562
563         NL80211_CMD_MICHAEL_MIC_FAILURE,
564
565         NL80211_CMD_REG_BEACON_HINT,
566
567         NL80211_CMD_JOIN_IBSS,
568         NL80211_CMD_LEAVE_IBSS,
569
570         NL80211_CMD_TESTMODE,
571
572         NL80211_CMD_CONNECT,
573         NL80211_CMD_ROAM,
574         NL80211_CMD_DISCONNECT,
575
576         NL80211_CMD_SET_WIPHY_NETNS,
577
578         NL80211_CMD_GET_SURVEY,
579         NL80211_CMD_NEW_SURVEY_RESULTS,
580
581         NL80211_CMD_SET_PMKSA,
582         NL80211_CMD_DEL_PMKSA,
583         NL80211_CMD_FLUSH_PMKSA,
584
585         NL80211_CMD_REMAIN_ON_CHANNEL,
586         NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
587
588         NL80211_CMD_SET_TX_BITRATE_MASK,
589
590         NL80211_CMD_REGISTER_FRAME,
591         NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
592         NL80211_CMD_FRAME,
593         NL80211_CMD_ACTION = NL80211_CMD_FRAME,
594         NL80211_CMD_FRAME_TX_STATUS,
595         NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
596
597         NL80211_CMD_SET_POWER_SAVE,
598         NL80211_CMD_GET_POWER_SAVE,
599
600         NL80211_CMD_SET_CQM,
601         NL80211_CMD_NOTIFY_CQM,
602
603         NL80211_CMD_SET_CHANNEL,
604         NL80211_CMD_SET_WDS_PEER,
605
606         NL80211_CMD_FRAME_WAIT_CANCEL,
607
608         NL80211_CMD_JOIN_MESH,
609         NL80211_CMD_LEAVE_MESH,
610
611         NL80211_CMD_UNPROT_DEAUTHENTICATE,
612         NL80211_CMD_UNPROT_DISASSOCIATE,
613
614         NL80211_CMD_NEW_PEER_CANDIDATE,
615
616         NL80211_CMD_GET_WOWLAN,
617         NL80211_CMD_SET_WOWLAN,
618
619         NL80211_CMD_START_SCHED_SCAN,
620         NL80211_CMD_STOP_SCHED_SCAN,
621         NL80211_CMD_SCHED_SCAN_RESULTS,
622         NL80211_CMD_SCHED_SCAN_STOPPED,
623
624         NL80211_CMD_SET_REKEY_OFFLOAD,
625
626         /* add new commands above here */
627
628         /* used to define NL80211_CMD_MAX below */
629         __NL80211_CMD_AFTER_LAST,
630         NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
631 };
632
633 /*
634  * Allow user space programs to use #ifdef on new commands by defining them
635  * here
636  */
637 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
638 #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
639 #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
640 #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
641 #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
642 #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
643 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
644 #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
645
646 /* source-level API compatibility */
647 #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
648 #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
649 #define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
650
651 /**
652  * enum nl80211_attrs - nl80211 netlink attributes
653  *
654  * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
655  *
656  * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
657  *      /sys/class/ieee80211/<phyname>/index
658  * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
659  * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
660  * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
661  * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
662  *      if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
663  *      NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
664  *              this attribute)
665  *      NL80211_CHAN_HT20 = HT20 only
666  *      NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
667  *      NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
668  * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
669  *      less than or equal to the RTS threshold; allowed range: 1..255;
670  *      dot11ShortRetryLimit; u8
671  * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
672  *      greater than the RTS threshold; allowed range: 1..255;
673  *      dot11ShortLongLimit; u8
674  * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
675  *      length in octets for frames; allowed range: 256..8000, disable
676  *      fragmentation with (u32)-1; dot11FragmentationThreshold; u32
677  * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
678  *      larger than or equal to this use RTS/CTS handshake); allowed range:
679  *      0..65536, disable with (u32)-1; dot11RTSThreshold; u32
680  * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
681  *      section 7.3.2.9; dot11CoverageClass; u8
682  *
683  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
684  * @NL80211_ATTR_IFNAME: network interface name
685  * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
686  *
687  * @NL80211_ATTR_MAC: MAC address (various uses)
688  *
689  * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
690  *      16 bytes encryption key followed by 8 bytes each for TX and RX MIC
691  *      keys
692  * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
693  * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
694  *      section 7.3.2.25.1, e.g. 0x000FAC04)
695  * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
696  *      CCMP keys, each six bytes in little endian
697  *
698  * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
699  * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
700  * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
701  * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
702  *
703  * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
704  * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
705  *      &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
706  * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
707  *      IEEE 802.11 7.3.1.6 (u16).
708  * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
709  *      rates as defined by IEEE 802.11 7.3.2.2 but without the length
710  *      restriction (at most %NL80211_MAX_SUPP_RATES).
711  * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
712  *      to, or the AP interface the station was originally added to to.
713  * @NL80211_ATTR_STA_INFO: information about a station, part of station info
714  *      given for %NL80211_CMD_GET_STATION, nested attribute containing
715  *      info as possible, see &enum nl80211_sta_info.
716  *
717  * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
718  *      consisting of a nested array.
719  *
720  * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
721  * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
722  * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
723  * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
724  *      info given for %NL80211_CMD_GET_MPATH, nested attribute described at
725  *      &enum nl80211_mpath_info.
726  *
727  * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
728  *      &enum nl80211_mntr_flags.
729  *
730  * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
731  *      current regulatory domain should be set to or is already set to.
732  *      For example, 'CR', for Costa Rica. This attribute is used by the kernel
733  *      to query the CRDA to retrieve one regulatory domain. This attribute can
734  *      also be used by userspace to query the kernel for the currently set
735  *      regulatory domain. We chose an alpha2 as that is also used by the
736  *      IEEE-802.11d country information element to identify a country.
737  *      Users can also simply ask the wireless core to set regulatory domain
738  *      to a specific alpha2.
739  * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
740  *      rules.
741  *
742  * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
743  * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
744  *      (u8, 0 or 1)
745  * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
746  *      (u8, 0 or 1)
747  * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
748  *      rates in format defined by IEEE 802.11 7.3.2.2 but without the length
749  *      restriction (at most %NL80211_MAX_SUPP_RATES).
750  *
751  * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
752  *      association request when used with NL80211_CMD_NEW_STATION)
753  *
754  * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
755  *      supported interface types, each a flag attribute with the number
756  *      of the interface mode.
757  *
758  * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
759  *      %NL80211_CMD_SET_MGMT_EXTRA_IE.
760  *
761  * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
762  *      %NL80211_CMD_SET_MGMT_EXTRA_IE).
763  *
764  * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
765  *      a single scan request, a wiphy attribute.
766  * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
767  *      scan with a single scheduled scan request, a wiphy attribute.
768  * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
769  *      that can be added to a scan request
770  * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
771  *      elements that can be added to a scheduled scan request
772  * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
773  *      used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
774  *
775  * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
776  * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
777  *      scanning and include a zero-length SSID (wildcard) for wildcard scan
778  * @NL80211_ATTR_BSS: scan result BSS
779  *
780  * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
781  *      currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
782  * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
783  *      set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
784  *
785  * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
786  *      an array of command numbers (i.e. a mapping index to command number)
787  *      that the driver for the given wiphy supports.
788  *
789  * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
790  *      and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
791  *      NL80211_CMD_ASSOCIATE events
792  * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
793  * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
794  *      represented as a u32
795  * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
796  *      %NL80211_CMD_DISASSOCIATE, u16
797  *
798  * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
799  *      a u32
800  *
801  * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
802  *      due to considerations from a beacon hint. This attribute reflects
803  *      the state of the channel _before_ the beacon hint processing. This
804  *      attributes consists of a nested attribute containing
805  *      NL80211_FREQUENCY_ATTR_*
806  * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
807  *      due to considerations from a beacon hint. This attribute reflects
808  *      the state of the channel _after_ the beacon hint processing. This
809  *      attributes consists of a nested attribute containing
810  *      NL80211_FREQUENCY_ATTR_*
811  *
812  * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
813  *      cipher suites
814  *
815  * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
816  *      for other networks on different channels
817  *
818  * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
819  *      is used, e.g., with %NL80211_CMD_AUTHENTICATE event
820  *
821  * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
822  *      used for the association (&enum nl80211_mfp, represented as a u32);
823  *      this attribute can be used
824  *      with %NL80211_CMD_ASSOCIATE request
825  *
826  * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
827  *      &struct nl80211_sta_flag_update.
828  *
829  * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
830  *      IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
831  *      station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
832  *      request, the driver will assume that the port is unauthorized until
833  *      authorized by user space. Otherwise, port is marked authorized by
834  *      default in station mode.
835  * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
836  *      ethertype that will be used for key negotiation. It can be
837  *      specified with the associate and connect commands. If it is not
838  *      specified, the value defaults to 0x888E (PAE, 802.1X). This
839  *      attribute is also used as a flag in the wiphy information to
840  *      indicate that protocols other than PAE are supported.
841  * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
842  *      %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
843  *      ethertype frames used for key negotiation must not be encrypted.
844  *
845  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
846  *      We recommend using nested, driver-specific attributes within this.
847  *
848  * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
849  *      event was due to the AP disconnecting the station, and not due to
850  *      a local disconnect request.
851  * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
852  *      event (u16)
853  * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
854  *      that protected APs should be used. This is also used with NEW_BEACON to
855  *      indicate that the BSS is to use protection.
856  *
857  * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
858  *      to indicate which unicast key ciphers will be used with the connection
859  *      (an array of u32).
860  * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
861  *      indicate which group key cipher will be used with the connection (a
862  *      u32).
863  * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
864  *      indicate which WPA version(s) the AP we want to associate with is using
865  *      (a u32 with flags from &enum nl80211_wpa_versions).
866  * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
867  *      indicate which key management algorithm(s) to use (an array of u32).
868  *
869  * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
870  *      sent out by the card, for ROAM and successful CONNECT events.
871  * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
872  *      sent by peer, for ROAM and successful CONNECT events.
873  *
874  * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
875  *      commands to specify using a reassociate frame
876  *
877  * @NL80211_ATTR_KEY: key information in a nested attribute with
878  *      %NL80211_KEY_* sub-attributes
879  * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
880  *      and join_ibss(), key information is in a nested attribute each
881  *      with %NL80211_KEY_* sub-attributes
882  *
883  * @NL80211_ATTR_PID: Process ID of a network namespace.
884  *
885  * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
886  *      dumps. This number increases whenever the object list being
887  *      dumped changes, and as such userspace can verify that it has
888  *      obtained a complete and consistent snapshot by verifying that
889  *      all dump messages contain the same generation number. If it
890  *      changed then the list changed and the dump should be repeated
891  *      completely from scratch.
892  *
893  * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
894  *
895  * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
896  *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
897  *      containing info as possible, see &enum survey_info.
898  *
899  * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
900  * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
901  *      cache, a wiphy attribute.
902  *
903  * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
904  * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
905  *      specifies the maximum duration that can be requested with the
906  *      remain-on-channel operation, in milliseconds, u32.
907  *
908  * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
909  *
910  * @NL80211_ATTR_TX_RATES: Nested set of attributes
911  *      (enum nl80211_tx_rate_attributes) describing TX rates per band. The
912  *      enum nl80211_band value is used as the index (nla_type() of the nested
913  *      data. If a band is not included, it will be configured to allow all
914  *      rates based on negotiated supported rates information. This attribute
915  *      is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
916  *
917  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
918  *      at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
919  * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
920  *      @NL80211_CMD_REGISTER_FRAME command.
921  * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
922  *      nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
923  *      information about which frame types can be transmitted with
924  *      %NL80211_CMD_FRAME.
925  * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
926  *      nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
927  *      information about which frame types can be registered for RX.
928  *
929  * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
930  *      acknowledged by the recipient.
931  *
932  * @NL80211_ATTR_CQM: connection quality monitor configuration in a
933  *      nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
934  *
935  * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
936  *      is requesting a local authentication/association state change without
937  *      invoking actual management frame exchange. This can be used with
938  *      NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
939  *      NL80211_CMD_DISASSOCIATE.
940  *
941  * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
942  *      connected to this BSS.
943  *
944  * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
945  *      &enum nl80211_tx_power_setting for possible values.
946  * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
947  *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
948  *      for non-automatic settings.
949  *
950  * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
951  *      means support for per-station GTKs.
952  *
953  * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
954  *      This can be used to mask out antennas which are not attached or should
955  *      not be used for transmitting. If an antenna is not selected in this
956  *      bitmap the hardware is not allowed to transmit on this antenna.
957  *
958  *      Each bit represents one antenna, starting with antenna 1 at the first
959  *      bit. Depending on which antennas are selected in the bitmap, 802.11n
960  *      drivers can derive which chainmasks to use (if all antennas belonging to
961  *      a particular chain are disabled this chain should be disabled) and if
962  *      a chain has diversity antennas wether diversity should be used or not.
963  *      HT capabilities (STBC, TX Beamforming, Antenna selection) can be
964  *      derived from the available chains after applying the antenna mask.
965  *      Non-802.11n drivers can derive wether to use diversity or not.
966  *      Drivers may reject configurations or RX/TX mask combinations they cannot
967  *      support by returning -EINVAL.
968  *
969  * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
970  *      This can be used to mask out antennas which are not attached or should
971  *      not be used for receiving. If an antenna is not selected in this bitmap
972  *      the hardware should not be configured to receive on this antenna.
973  *      For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
974  *
975  * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
976  *      for configuration as TX antennas via the above parameters.
977  *
978  * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
979  *      for configuration as RX antennas via the above parameters.
980  *
981  * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
982  *
983  * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
984  *      transmitted on another channel when the channel given doesn't match
985  *      the current channel. If the current channel doesn't match and this
986  *      flag isn't set, the frame will be rejected. This is also used as an
987  *      nl80211 capability flag.
988  *
989  * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
990  *
991  * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
992  *      attributes, specifying what a key should be set as default as.
993  *      See &enum nl80211_key_default_types.
994  *
995  * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
996  *      changed once the mesh is active.
997  * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
998  *      containing attributes from &enum nl80211_meshconf_params.
999  * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
1000  *      allows auth frames in a mesh to be passed to userspace for processing via
1001  *      the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
1002  * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
1003  *      defined in &enum nl80211_plink_state. Used when userspace is
1004  *      driving the peer link management state machine.
1005  *      @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
1006  *
1007  * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
1008  *      capabilities, the supported WoWLAN triggers
1009  * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
1010  *      indicate which WoW triggers should be enabled. This is also
1011  *      used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
1012  *      triggers.
1013
1014  * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
1015  *      cycles, in msecs.
1016
1017  * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
1018  *      sets of attributes to match during scheduled scans.  Only BSSs
1019  *      that match any of the sets will be reported.  These are
1020  *      pass-thru filter rules.
1021  *      For a match to succeed, the BSS must match all attributes of a
1022  *      set.  Since not every hardware supports matching all types of
1023  *      attributes, there is no guarantee that the reported BSSs are
1024  *      fully complying with the match sets and userspace needs to be
1025  *      able to ignore them by itself.
1026  *      Thus, the implementation is somewhat hardware-dependent, but
1027  *      this is only an optimization and the userspace application
1028  *      needs to handle all the non-filtered results anyway.
1029  *      If the match attributes don't make sense when combined with
1030  *      the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
1031  *      is included in the probe request, but the match attributes
1032  *      will never let it go through), -EINVAL may be returned.
1033  *      If ommited, no filtering is done.
1034  *
1035  * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
1036  *      interface combinations. In each nested item, it contains attributes
1037  *      defined in &enum nl80211_if_combination_attrs.
1038  * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
1039  *      %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
1040  *      are managed in software: interfaces of these types aren't subject to
1041  *      any restrictions in their number or combinations.
1042  *
1043  * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
1044  *      necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
1045  *
1046  * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
1047  *      nested array attribute containing an entry for each band, with the entry
1048  *      being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
1049  *      without the length restriction (at most %NL80211_MAX_SUPP_RATES).
1050  *
1051  * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
1052  *      and Probe Response (when response to wildcard Probe Request); see
1053  *      &enum nl80211_hidden_ssid, represented as a u32
1054  *
1055  * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
1056  *      This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
1057  *      provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
1058  *      driver (or firmware) replies to Probe Request frames.
1059  * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
1060  *      Response frames. This is used with %NL80211_CMD_NEW_BEACON and
1061  *      %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
1062  *      (Re)Association Response frames when the driver (or firmware) replies to
1063  *      (Re)Association Request frames.
1064  *
1065  * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
1066  *      of the station, see &enum nl80211_sta_wme_attr.
1067  * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
1068  *      as AP.
1069  *
1070  * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
1071  *      roaming to another AP in the same ESS if the signal lever is low.
1072  *
1073  * @NL80211_ATTR_MAX: highest attribute number currently defined
1074  * @__NL80211_ATTR_AFTER_LAST: internal use
1075  */
1076 enum nl80211_attrs {
1077 /* don't change the order or add anything between, this is ABI! */
1078         NL80211_ATTR_UNSPEC,
1079
1080         NL80211_ATTR_WIPHY,
1081         NL80211_ATTR_WIPHY_NAME,
1082
1083         NL80211_ATTR_IFINDEX,
1084         NL80211_ATTR_IFNAME,
1085         NL80211_ATTR_IFTYPE,
1086
1087         NL80211_ATTR_MAC,
1088
1089         NL80211_ATTR_KEY_DATA,
1090         NL80211_ATTR_KEY_IDX,
1091         NL80211_ATTR_KEY_CIPHER,
1092         NL80211_ATTR_KEY_SEQ,
1093         NL80211_ATTR_KEY_DEFAULT,
1094
1095         NL80211_ATTR_BEACON_INTERVAL,
1096         NL80211_ATTR_DTIM_PERIOD,
1097         NL80211_ATTR_BEACON_HEAD,
1098         NL80211_ATTR_BEACON_TAIL,
1099
1100         NL80211_ATTR_STA_AID,
1101         NL80211_ATTR_STA_FLAGS,
1102         NL80211_ATTR_STA_LISTEN_INTERVAL,
1103         NL80211_ATTR_STA_SUPPORTED_RATES,
1104         NL80211_ATTR_STA_VLAN,
1105         NL80211_ATTR_STA_INFO,
1106
1107         NL80211_ATTR_WIPHY_BANDS,
1108
1109         NL80211_ATTR_MNTR_FLAGS,
1110
1111         NL80211_ATTR_MESH_ID,
1112         NL80211_ATTR_STA_PLINK_ACTION,
1113         NL80211_ATTR_MPATH_NEXT_HOP,
1114         NL80211_ATTR_MPATH_INFO,
1115
1116         NL80211_ATTR_BSS_CTS_PROT,
1117         NL80211_ATTR_BSS_SHORT_PREAMBLE,
1118         NL80211_ATTR_BSS_SHORT_SLOT_TIME,
1119
1120         NL80211_ATTR_HT_CAPABILITY,
1121
1122         NL80211_ATTR_SUPPORTED_IFTYPES,
1123
1124         NL80211_ATTR_REG_ALPHA2,
1125         NL80211_ATTR_REG_RULES,
1126
1127         NL80211_ATTR_MESH_CONFIG,
1128
1129         NL80211_ATTR_BSS_BASIC_RATES,
1130
1131         NL80211_ATTR_WIPHY_TXQ_PARAMS,
1132         NL80211_ATTR_WIPHY_FREQ,
1133         NL80211_ATTR_WIPHY_CHANNEL_TYPE,
1134
1135         NL80211_ATTR_KEY_DEFAULT_MGMT,
1136
1137         NL80211_ATTR_MGMT_SUBTYPE,
1138         NL80211_ATTR_IE,
1139
1140         NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
1141
1142         NL80211_ATTR_SCAN_FREQUENCIES,
1143         NL80211_ATTR_SCAN_SSIDS,
1144         NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
1145         NL80211_ATTR_BSS,
1146
1147         NL80211_ATTR_REG_INITIATOR,
1148         NL80211_ATTR_REG_TYPE,
1149
1150         NL80211_ATTR_SUPPORTED_COMMANDS,
1151
1152         NL80211_ATTR_FRAME,
1153         NL80211_ATTR_SSID,
1154         NL80211_ATTR_AUTH_TYPE,
1155         NL80211_ATTR_REASON_CODE,
1156
1157         NL80211_ATTR_KEY_TYPE,
1158
1159         NL80211_ATTR_MAX_SCAN_IE_LEN,
1160         NL80211_ATTR_CIPHER_SUITES,
1161
1162         NL80211_ATTR_FREQ_BEFORE,
1163         NL80211_ATTR_FREQ_AFTER,
1164
1165         NL80211_ATTR_FREQ_FIXED,
1166
1167
1168         NL80211_ATTR_WIPHY_RETRY_SHORT,
1169         NL80211_ATTR_WIPHY_RETRY_LONG,
1170         NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
1171         NL80211_ATTR_WIPHY_RTS_THRESHOLD,
1172
1173         NL80211_ATTR_TIMED_OUT,
1174
1175         NL80211_ATTR_USE_MFP,
1176
1177         NL80211_ATTR_STA_FLAGS2,
1178
1179         NL80211_ATTR_CONTROL_PORT,
1180
1181         NL80211_ATTR_TESTDATA,
1182
1183         NL80211_ATTR_PRIVACY,
1184
1185         NL80211_ATTR_DISCONNECTED_BY_AP,
1186         NL80211_ATTR_STATUS_CODE,
1187
1188         NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
1189         NL80211_ATTR_CIPHER_SUITE_GROUP,
1190         NL80211_ATTR_WPA_VERSIONS,
1191         NL80211_ATTR_AKM_SUITES,
1192
1193         NL80211_ATTR_REQ_IE,
1194         NL80211_ATTR_RESP_IE,
1195
1196         NL80211_ATTR_PREV_BSSID,
1197
1198         NL80211_ATTR_KEY,
1199         NL80211_ATTR_KEYS,
1200
1201         NL80211_ATTR_PID,
1202
1203         NL80211_ATTR_4ADDR,
1204
1205         NL80211_ATTR_SURVEY_INFO,
1206
1207         NL80211_ATTR_PMKID,
1208         NL80211_ATTR_MAX_NUM_PMKIDS,
1209
1210         NL80211_ATTR_DURATION,
1211
1212         NL80211_ATTR_COOKIE,
1213
1214         NL80211_ATTR_WIPHY_COVERAGE_CLASS,
1215
1216         NL80211_ATTR_TX_RATES,
1217
1218         NL80211_ATTR_FRAME_MATCH,
1219
1220         NL80211_ATTR_ACK,
1221
1222         NL80211_ATTR_PS_STATE,
1223
1224         NL80211_ATTR_CQM,
1225
1226         NL80211_ATTR_LOCAL_STATE_CHANGE,
1227
1228         NL80211_ATTR_AP_ISOLATE,
1229
1230         NL80211_ATTR_WIPHY_TX_POWER_SETTING,
1231         NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
1232
1233         NL80211_ATTR_TX_FRAME_TYPES,
1234         NL80211_ATTR_RX_FRAME_TYPES,
1235         NL80211_ATTR_FRAME_TYPE,
1236
1237         NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
1238         NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
1239
1240         NL80211_ATTR_SUPPORT_IBSS_RSN,
1241
1242         NL80211_ATTR_WIPHY_ANTENNA_TX,
1243         NL80211_ATTR_WIPHY_ANTENNA_RX,
1244
1245         NL80211_ATTR_MCAST_RATE,
1246
1247         NL80211_ATTR_OFFCHANNEL_TX_OK,
1248
1249         NL80211_ATTR_BSS_HT_OPMODE,
1250
1251         NL80211_ATTR_KEY_DEFAULT_TYPES,
1252
1253         NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
1254
1255         NL80211_ATTR_MESH_SETUP,
1256
1257         NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
1258         NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
1259
1260         NL80211_ATTR_SUPPORT_MESH_AUTH,
1261         NL80211_ATTR_STA_PLINK_STATE,
1262
1263         NL80211_ATTR_WOWLAN_TRIGGERS,
1264         NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
1265
1266         NL80211_ATTR_SCHED_SCAN_INTERVAL,
1267
1268         NL80211_ATTR_INTERFACE_COMBINATIONS,
1269         NL80211_ATTR_SOFTWARE_IFTYPES,
1270
1271         NL80211_ATTR_REKEY_DATA,
1272
1273         NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
1274         NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
1275
1276         NL80211_ATTR_SCAN_SUPP_RATES,
1277
1278         NL80211_ATTR_HIDDEN_SSID,
1279
1280         NL80211_ATTR_IE_PROBE_RESP,
1281         NL80211_ATTR_IE_ASSOC_RESP,
1282
1283         NL80211_ATTR_STA_WME,
1284         NL80211_ATTR_SUPPORT_AP_UAPSD,
1285
1286         NL80211_ATTR_ROAM_SUPPORT,
1287
1288         NL80211_ATTR_SCHED_SCAN_MATCH,
1289         NL80211_ATTR_MAX_MATCH_SETS,
1290
1291         /* add attributes here, update the policy in nl80211.c */
1292
1293         __NL80211_ATTR_AFTER_LAST,
1294         NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
1295 };
1296
1297 /* source-level API compatibility */
1298 #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
1299 #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
1300
1301 /*
1302  * Allow user space programs to use #ifdef on new attributes by defining them
1303  * here
1304  */
1305 #define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
1306 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
1307 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
1308 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
1309 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
1310 #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
1311 #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
1312 #define NL80211_ATTR_IE NL80211_ATTR_IE
1313 #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
1314 #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
1315 #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
1316 #define NL80211_ATTR_SSID NL80211_ATTR_SSID
1317 #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
1318 #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
1319 #define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
1320 #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
1321 #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
1322 #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
1323 #define NL80211_ATTR_KEY NL80211_ATTR_KEY
1324 #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
1325
1326 #define NL80211_MAX_SUPP_RATES                  32
1327 #define NL80211_MAX_SUPP_REG_RULES              32
1328 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY       0
1329 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY     16
1330 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY     24
1331 #define NL80211_HT_CAPABILITY_LEN               26
1332
1333 #define NL80211_MAX_NR_CIPHER_SUITES            5
1334 #define NL80211_MAX_NR_AKM_SUITES               2
1335
1336 /**
1337  * enum nl80211_iftype - (virtual) interface types
1338  *
1339  * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
1340  * @NL80211_IFTYPE_ADHOC: independent BSS member
1341  * @NL80211_IFTYPE_STATION: managed BSS member
1342  * @NL80211_IFTYPE_AP: access point
1343  * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
1344  *      are a bit special in that they must always be tied to a pre-existing
1345  *      AP type interface.
1346  * @NL80211_IFTYPE_WDS: wireless distribution interface
1347  * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
1348  * @NL80211_IFTYPE_MESH_POINT: mesh point
1349  * @NL80211_IFTYPE_P2P_CLIENT: P2P client
1350  * @NL80211_IFTYPE_P2P_GO: P2P group owner
1351  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
1352  * @NUM_NL80211_IFTYPES: number of defined interface types
1353  *
1354  * These values are used with the %NL80211_ATTR_IFTYPE
1355  * to set the type of an interface.
1356  *
1357  */
1358 enum nl80211_iftype {
1359         NL80211_IFTYPE_UNSPECIFIED,
1360         NL80211_IFTYPE_ADHOC,
1361         NL80211_IFTYPE_STATION,
1362         NL80211_IFTYPE_AP,
1363         NL80211_IFTYPE_AP_VLAN,
1364         NL80211_IFTYPE_WDS,
1365         NL80211_IFTYPE_MONITOR,
1366         NL80211_IFTYPE_MESH_POINT,
1367         NL80211_IFTYPE_P2P_CLIENT,
1368         NL80211_IFTYPE_P2P_GO,
1369
1370         /* keep last */
1371         NUM_NL80211_IFTYPES,
1372         NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
1373 };
1374
1375 /**
1376  * enum nl80211_sta_flags - station flags
1377  *
1378  * Station flags. When a station is added to an AP interface, it is
1379  * assumed to be already associated (and hence authenticated.)
1380  *
1381  * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
1382  * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
1383  * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
1384  *      with short barker preamble
1385  * @NL80211_STA_FLAG_WME: station is WME/QoS capable
1386  * @NL80211_STA_FLAG_MFP: station uses management frame protection
1387  * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
1388  * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
1389  * @__NL80211_STA_FLAG_AFTER_LAST: internal use
1390  */
1391 enum nl80211_sta_flags {
1392         __NL80211_STA_FLAG_INVALID,
1393         NL80211_STA_FLAG_AUTHORIZED,
1394         NL80211_STA_FLAG_SHORT_PREAMBLE,
1395         NL80211_STA_FLAG_WME,
1396         NL80211_STA_FLAG_MFP,
1397         NL80211_STA_FLAG_AUTHENTICATED,
1398
1399         /* keep last */
1400         __NL80211_STA_FLAG_AFTER_LAST,
1401         NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
1402 };
1403
1404 /**
1405  * struct nl80211_sta_flag_update - station flags mask/set
1406  * @mask: mask of station flags to set
1407  * @set: which values to set them to
1408  *
1409  * Both mask and set contain bits as per &enum nl80211_sta_flags.
1410  */
1411 struct nl80211_sta_flag_update {
1412         __u32 mask;
1413         __u32 set;
1414 } __attribute__((packed));
1415
1416 /**
1417  * enum nl80211_rate_info - bitrate information
1418  *
1419  * These attribute types are used with %NL80211_STA_INFO_TXRATE
1420  * when getting information about the bitrate of a station.
1421  *
1422  * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
1423  * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
1424  * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
1425  * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
1426  * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
1427  * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
1428  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
1429  */
1430 enum nl80211_rate_info {
1431         __NL80211_RATE_INFO_INVALID,
1432         NL80211_RATE_INFO_BITRATE,
1433         NL80211_RATE_INFO_MCS,
1434         NL80211_RATE_INFO_40_MHZ_WIDTH,
1435         NL80211_RATE_INFO_SHORT_GI,
1436
1437         /* keep last */
1438         __NL80211_RATE_INFO_AFTER_LAST,
1439         NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
1440 };
1441
1442 /**
1443  * enum nl80211_sta_bss_param - BSS information collected by STA
1444  *
1445  * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
1446  * when getting information about the bitrate of a station.
1447  *
1448  * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
1449  * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
1450  * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE:  whether short preamble is enabled
1451  *      (flag)
1452  * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME:  whether short slot time is enabled
1453  *      (flag)
1454  * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
1455  * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
1456  * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
1457  * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
1458  */
1459 enum nl80211_sta_bss_param {
1460         __NL80211_STA_BSS_PARAM_INVALID,
1461         NL80211_STA_BSS_PARAM_CTS_PROT,
1462         NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
1463         NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
1464         NL80211_STA_BSS_PARAM_DTIM_PERIOD,
1465         NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
1466
1467         /* keep last */
1468         __NL80211_STA_BSS_PARAM_AFTER_LAST,
1469         NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
1470 };
1471
1472 /**
1473  * enum nl80211_sta_info - station information
1474  *
1475  * These attribute types are used with %NL80211_ATTR_STA_INFO
1476  * when getting information about a station.
1477  *
1478  * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
1479  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
1480  * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
1481  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
1482  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
1483  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
1484  *      containing info as possible, see &enum nl80211_rate_info
1485  * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
1486  * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
1487  *      station)
1488  * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
1489  * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
1490  * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
1491  * @NL80211_STA_INFO_LLID: the station's mesh LLID
1492  * @NL80211_STA_INFO_PLID: the station's mesh PLID
1493  * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
1494  *      (see %enum nl80211_plink_state)
1495  * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
1496  *      attribute, like NL80211_STA_INFO_TX_BITRATE.
1497  * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
1498  *     containing info as possible, see &enum nl80211_sta_bss_param
1499  * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
1500  * @__NL80211_STA_INFO_AFTER_LAST: internal
1501  * @NL80211_STA_INFO_MAX: highest possible station info attribute
1502  */
1503 enum nl80211_sta_info {
1504         __NL80211_STA_INFO_INVALID,
1505         NL80211_STA_INFO_INACTIVE_TIME,
1506         NL80211_STA_INFO_RX_BYTES,
1507         NL80211_STA_INFO_TX_BYTES,
1508         NL80211_STA_INFO_LLID,
1509         NL80211_STA_INFO_PLID,
1510         NL80211_STA_INFO_PLINK_STATE,
1511         NL80211_STA_INFO_SIGNAL,
1512         NL80211_STA_INFO_TX_BITRATE,
1513         NL80211_STA_INFO_RX_PACKETS,
1514         NL80211_STA_INFO_TX_PACKETS,
1515         NL80211_STA_INFO_TX_RETRIES,
1516         NL80211_STA_INFO_TX_FAILED,
1517         NL80211_STA_INFO_SIGNAL_AVG,
1518         NL80211_STA_INFO_RX_BITRATE,
1519         NL80211_STA_INFO_BSS_PARAM,
1520         NL80211_STA_INFO_CONNECTED_TIME,
1521
1522         /* keep last */
1523         __NL80211_STA_INFO_AFTER_LAST,
1524         NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
1525 };
1526
1527 /**
1528  * enum nl80211_mpath_flags - nl80211 mesh path flags
1529  *
1530  * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
1531  * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
1532  * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
1533  * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
1534  * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
1535  */
1536 enum nl80211_mpath_flags {
1537         NL80211_MPATH_FLAG_ACTIVE =     1<<0,
1538         NL80211_MPATH_FLAG_RESOLVING =  1<<1,
1539         NL80211_MPATH_FLAG_SN_VALID =   1<<2,
1540         NL80211_MPATH_FLAG_FIXED =      1<<3,
1541         NL80211_MPATH_FLAG_RESOLVED =   1<<4,
1542 };
1543
1544 /**
1545  * enum nl80211_mpath_info - mesh path information
1546  *
1547  * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
1548  * information about a mesh path.
1549  *
1550  * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
1551  * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
1552  * @NL80211_MPATH_INFO_SN: destination sequence number
1553  * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
1554  * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
1555  * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
1556  *      &enum nl80211_mpath_flags;
1557  * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
1558  * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
1559  * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
1560  *      currently defind
1561  * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
1562  */
1563 enum nl80211_mpath_info {
1564         __NL80211_MPATH_INFO_INVALID,
1565         NL80211_MPATH_INFO_FRAME_QLEN,
1566         NL80211_MPATH_INFO_SN,
1567         NL80211_MPATH_INFO_METRIC,
1568         NL80211_MPATH_INFO_EXPTIME,
1569         NL80211_MPATH_INFO_FLAGS,
1570         NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
1571         NL80211_MPATH_INFO_DISCOVERY_RETRIES,
1572
1573         /* keep last */
1574         __NL80211_MPATH_INFO_AFTER_LAST,
1575         NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
1576 };
1577
1578 /**
1579  * enum nl80211_band_attr - band attributes
1580  * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
1581  * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
1582  *      an array of nested frequency attributes
1583  * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
1584  *      an array of nested bitrate attributes
1585  * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
1586  *      defined in 802.11n
1587  * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
1588  * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
1589  * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
1590  * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
1591  * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
1592  */
1593 enum nl80211_band_attr {
1594         __NL80211_BAND_ATTR_INVALID,
1595         NL80211_BAND_ATTR_FREQS,
1596         NL80211_BAND_ATTR_RATES,
1597
1598         NL80211_BAND_ATTR_HT_MCS_SET,
1599         NL80211_BAND_ATTR_HT_CAPA,
1600         NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
1601         NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
1602
1603         /* keep last */
1604         __NL80211_BAND_ATTR_AFTER_LAST,
1605         NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
1606 };
1607
1608 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
1609
1610 /**
1611  * enum nl80211_frequency_attr - frequency attributes
1612  * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
1613  * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
1614  * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
1615  *      regulatory domain.
1616  * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
1617  *      permitted on this channel in current regulatory domain.
1618  * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
1619  *      on this channel in current regulatory domain.
1620  * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
1621  *      on this channel in current regulatory domain.
1622  * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
1623  *      (100 * dBm).
1624  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
1625  *      currently defined
1626  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
1627  */
1628 enum nl80211_frequency_attr {
1629         __NL80211_FREQUENCY_ATTR_INVALID,
1630         NL80211_FREQUENCY_ATTR_FREQ,
1631         NL80211_FREQUENCY_ATTR_DISABLED,
1632         NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
1633         NL80211_FREQUENCY_ATTR_NO_IBSS,
1634         NL80211_FREQUENCY_ATTR_RADAR,
1635         NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
1636
1637         /* keep last */
1638         __NL80211_FREQUENCY_ATTR_AFTER_LAST,
1639         NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
1640 };
1641
1642 #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
1643
1644 /**
1645  * enum nl80211_bitrate_attr - bitrate attributes
1646  * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
1647  * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
1648  * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
1649  *      in 2.4 GHz band.
1650  * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
1651  *      currently defined
1652  * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
1653  */
1654 enum nl80211_bitrate_attr {
1655         __NL80211_BITRATE_ATTR_INVALID,
1656         NL80211_BITRATE_ATTR_RATE,
1657         NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
1658
1659         /* keep last */
1660         __NL80211_BITRATE_ATTR_AFTER_LAST,
1661         NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
1662 };
1663
1664 /**
1665  * enum nl80211_initiator - Indicates the initiator of a reg domain request
1666  * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
1667  *      regulatory domain.
1668  * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
1669  *      regulatory domain.
1670  * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
1671  *      wireless core it thinks its knows the regulatory domain we should be in.
1672  * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
1673  *      802.11 country information element with regulatory information it
1674  *      thinks we should consider. cfg80211 only processes the country
1675  *      code from the IE, and relies on the regulatory domain information
1676  *      structure passed by userspace (CRDA) from our wireless-regdb.
1677  *      If a channel is enabled but the country code indicates it should
1678  *      be disabled we disable the channel and re-enable it upon disassociation.
1679  */
1680 enum nl80211_reg_initiator {
1681         NL80211_REGDOM_SET_BY_CORE,
1682         NL80211_REGDOM_SET_BY_USER,
1683         NL80211_REGDOM_SET_BY_DRIVER,
1684         NL80211_REGDOM_SET_BY_COUNTRY_IE,
1685 };
1686
1687 /**
1688  * enum nl80211_reg_type - specifies the type of regulatory domain
1689  * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
1690  *      to a specific country. When this is set you can count on the
1691  *      ISO / IEC 3166 alpha2 country code being valid.
1692  * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
1693  *      domain.
1694  * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
1695  *      driver specific world regulatory domain. These do not apply system-wide
1696  *      and are only applicable to the individual devices which have requested
1697  *      them to be applied.
1698  * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
1699  *      of an intersection between two regulatory domains -- the previously
1700  *      set regulatory domain on the system and the last accepted regulatory
1701  *      domain request to be processed.
1702  */
1703 enum nl80211_reg_type {
1704         NL80211_REGDOM_TYPE_COUNTRY,
1705         NL80211_REGDOM_TYPE_WORLD,
1706         NL80211_REGDOM_TYPE_CUSTOM_WORLD,
1707         NL80211_REGDOM_TYPE_INTERSECTION,
1708 };
1709
1710 /**
1711  * enum nl80211_reg_rule_attr - regulatory rule attributes
1712  * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
1713  * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
1714  *      considerations for a given frequency range. These are the
1715  *      &enum nl80211_reg_rule_flags.
1716  * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
1717  *      rule in KHz. This is not a center of frequency but an actual regulatory
1718  *      band edge.
1719  * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
1720  *      in KHz. This is not a center a frequency but an actual regulatory
1721  *      band edge.
1722  * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
1723  *      frequency range, in KHz.
1724  * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
1725  *      for a given frequency range. The value is in mBi (100 * dBi).
1726  *      If you don't have one then don't send this.
1727  * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
1728  *      a given frequency range. The value is in mBm (100 * dBm).
1729  * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
1730  *      currently defined
1731  * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
1732  */
1733 enum nl80211_reg_rule_attr {
1734         __NL80211_REG_RULE_ATTR_INVALID,
1735         NL80211_ATTR_REG_RULE_FLAGS,
1736
1737         NL80211_ATTR_FREQ_RANGE_START,
1738         NL80211_ATTR_FREQ_RANGE_END,
1739         NL80211_ATTR_FREQ_RANGE_MAX_BW,
1740
1741         NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
1742         NL80211_ATTR_POWER_RULE_MAX_EIRP,
1743
1744         /* keep last */
1745         __NL80211_REG_RULE_ATTR_AFTER_LAST,
1746         NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
1747 };
1748
1749 /**
1750  * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
1751  * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
1752  * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
1753  * only report BSS with matching SSID.
1754  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
1755  *      attribute number currently defined
1756  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
1757  */
1758 enum nl80211_sched_scan_match_attr {
1759         __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
1760
1761         NL80211_ATTR_SCHED_SCAN_MATCH_SSID,
1762
1763         /* keep last */
1764         __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
1765         NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
1766                 __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
1767 };
1768
1769 /**
1770  * enum nl80211_reg_rule_flags - regulatory rule flags
1771  *
1772  * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
1773  * @NL80211_RRF_NO_CCK: CCK modulation not allowed
1774  * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
1775  * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
1776  * @NL80211_RRF_DFS: DFS support is required to be used
1777  * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
1778  * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
1779  * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
1780  * @NL80211_RRF_NO_IBSS: no IBSS is allowed
1781  */
1782 enum nl80211_reg_rule_flags {
1783         NL80211_RRF_NO_OFDM             = 1<<0,
1784         NL80211_RRF_NO_CCK              = 1<<1,
1785         NL80211_RRF_NO_INDOOR           = 1<<2,
1786         NL80211_RRF_NO_OUTDOOR          = 1<<3,
1787         NL80211_RRF_DFS                 = 1<<4,
1788         NL80211_RRF_PTP_ONLY            = 1<<5,
1789         NL80211_RRF_PTMP_ONLY           = 1<<6,
1790         NL80211_RRF_PASSIVE_SCAN        = 1<<7,
1791         NL80211_RRF_NO_IBSS             = 1<<8,
1792 };
1793
1794 /**
1795  * enum nl80211_survey_info - survey information
1796  *
1797  * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
1798  * when getting information about a survey.
1799  *
1800  * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
1801  * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
1802  * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
1803  * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
1804  * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
1805  *      spent on this channel
1806  * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
1807  *      channel was sensed busy (either due to activity or energy detect)
1808  * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
1809  *      channel was sensed busy
1810  * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
1811  *      receiving data
1812  * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
1813  *      transmitting data
1814  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
1815  *      currently defined
1816  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
1817  */
1818 enum nl80211_survey_info {
1819         __NL80211_SURVEY_INFO_INVALID,
1820         NL80211_SURVEY_INFO_FREQUENCY,
1821         NL80211_SURVEY_INFO_NOISE,
1822         NL80211_SURVEY_INFO_IN_USE,
1823         NL80211_SURVEY_INFO_CHANNEL_TIME,
1824         NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
1825         NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
1826         NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
1827         NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
1828
1829         /* keep last */
1830         __NL80211_SURVEY_INFO_AFTER_LAST,
1831         NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
1832 };
1833
1834 /**
1835  * enum nl80211_mntr_flags - monitor configuration flags
1836  *
1837  * Monitor configuration flags.
1838  *
1839  * @__NL80211_MNTR_FLAG_INVALID: reserved
1840  *
1841  * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
1842  * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
1843  * @NL80211_MNTR_FLAG_CONTROL: pass control frames
1844  * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
1845  * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
1846  *      overrides all other flags.
1847  *
1848  * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
1849  * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
1850  */
1851 enum nl80211_mntr_flags {
1852         __NL80211_MNTR_FLAG_INVALID,
1853         NL80211_MNTR_FLAG_FCSFAIL,
1854         NL80211_MNTR_FLAG_PLCPFAIL,
1855         NL80211_MNTR_FLAG_CONTROL,
1856         NL80211_MNTR_FLAG_OTHER_BSS,
1857         NL80211_MNTR_FLAG_COOK_FRAMES,
1858
1859         /* keep last */
1860         __NL80211_MNTR_FLAG_AFTER_LAST,
1861         NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
1862 };
1863
1864 /**
1865  * enum nl80211_meshconf_params - mesh configuration parameters
1866  *
1867  * Mesh configuration parameters. These can be changed while the mesh is
1868  * active.
1869  *
1870  * @__NL80211_MESHCONF_INVALID: internal use
1871  *
1872  * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
1873  * millisecond units, used by the Peer Link Open message
1874  *
1875  * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
1876  * millisecond units, used by the peer link management to close a peer link
1877  *
1878  * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
1879  * millisecond units
1880  *
1881  * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
1882  * on this mesh interface
1883  *
1884  * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
1885  * open retries that can be sent to establish a new peer link instance in a
1886  * mesh
1887  *
1888  * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
1889  * point.
1890  *
1891  * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
1892  * open peer links when we detect compatible mesh peers.
1893  *
1894  * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
1895  * containing a PREQ that an MP can send to a particular destination (path
1896  * target)
1897  *
1898  * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
1899  * (in milliseconds)
1900  *
1901  * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
1902  * until giving up on a path discovery (in milliseconds)
1903  *
1904  * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
1905  * points receiving a PREQ shall consider the forwarding information from the
1906  * root to be valid. (TU = time unit)
1907  *
1908  * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
1909  * TUs) during which an MP can send only one action frame containing a PREQ
1910  * reference element
1911  *
1912  * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
1913  * that it takes for an HWMP information element to propagate across the mesh
1914  *
1915  * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
1916  *
1917  * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
1918  * source mesh point for path selection elements.
1919  *
1920  * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
1921  * root announcements are transmitted.
1922  *
1923  * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
1924  * access to a broader network beyond the MBSS.  This is done via Root
1925  * Announcement frames.
1926  *
1927  * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
1928  *
1929  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
1930  */
1931 enum nl80211_meshconf_params {
1932         __NL80211_MESHCONF_INVALID,
1933         NL80211_MESHCONF_RETRY_TIMEOUT,
1934         NL80211_MESHCONF_CONFIRM_TIMEOUT,
1935         NL80211_MESHCONF_HOLDING_TIMEOUT,
1936         NL80211_MESHCONF_MAX_PEER_LINKS,
1937         NL80211_MESHCONF_MAX_RETRIES,
1938         NL80211_MESHCONF_TTL,
1939         NL80211_MESHCONF_AUTO_OPEN_PLINKS,
1940         NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
1941         NL80211_MESHCONF_PATH_REFRESH_TIME,
1942         NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
1943         NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
1944         NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
1945         NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
1946         NL80211_MESHCONF_HWMP_ROOTMODE,
1947         NL80211_MESHCONF_ELEMENT_TTL,
1948         NL80211_MESHCONF_HWMP_RANN_INTERVAL,
1949         NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
1950
1951         /* keep last */
1952         __NL80211_MESHCONF_ATTR_AFTER_LAST,
1953         NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
1954 };
1955
1956 /**
1957  * enum nl80211_mesh_setup_params - mesh setup parameters
1958  *
1959  * Mesh setup parameters.  These are used to start/join a mesh and cannot be
1960  * changed while the mesh is active.
1961  *
1962  * @__NL80211_MESH_SETUP_INVALID: Internal use
1963  *
1964  * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
1965  * vendor specific path selection algorithm or disable it to use the default
1966  * HWMP.
1967  *
1968  * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
1969  * vendor specific path metric or disable it to use the default Airtime
1970  * metric.
1971  *
1972  * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
1973  * robust security network ie, or a vendor specific information element that
1974  * vendors will use to identify the path selection methods and metrics in use.
1975  *
1976  * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
1977  * daemon will be authenticating mesh candidates.
1978  *
1979  * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
1980  * daemon will be securing peer link frames.  AMPE is a secured version of Mesh
1981  * Peering Management (MPM) and is implemented with the assistance of a
1982  * userspace daemon.  When this flag is set, the kernel will send peer
1983  * management frames to a userspace daemon that will implement AMPE
1984  * functionality (security capabilities selection, key confirmation, and key
1985  * management).  When the flag is unset (default), the kernel can autonomously
1986  * complete (unsecured) mesh peering without the need of a userspace daemon.
1987  *
1988  * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
1989  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
1990  */
1991 enum nl80211_mesh_setup_params {
1992         __NL80211_MESH_SETUP_INVALID,
1993         NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
1994         NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
1995         NL80211_MESH_SETUP_IE,
1996         NL80211_MESH_SETUP_USERSPACE_AUTH,
1997         NL80211_MESH_SETUP_USERSPACE_AMPE,
1998
1999         /* keep last */
2000         __NL80211_MESH_SETUP_ATTR_AFTER_LAST,
2001         NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
2002 };
2003
2004 /**
2005  * enum nl80211_txq_attr - TX queue parameter attributes
2006  * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
2007  * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
2008  * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
2009  *      disabled
2010  * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
2011  *      2^n-1 in the range 1..32767]
2012  * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
2013  *      2^n-1 in the range 1..32767]
2014  * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
2015  * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
2016  * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
2017  */
2018 enum nl80211_txq_attr {
2019         __NL80211_TXQ_ATTR_INVALID,
2020         NL80211_TXQ_ATTR_QUEUE,
2021         NL80211_TXQ_ATTR_TXOP,
2022         NL80211_TXQ_ATTR_CWMIN,
2023         NL80211_TXQ_ATTR_CWMAX,
2024         NL80211_TXQ_ATTR_AIFS,
2025
2026         /* keep last */
2027         __NL80211_TXQ_ATTR_AFTER_LAST,
2028         NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
2029 };
2030
2031 enum nl80211_txq_q {
2032         NL80211_TXQ_Q_VO,
2033         NL80211_TXQ_Q_VI,
2034         NL80211_TXQ_Q_BE,
2035         NL80211_TXQ_Q_BK
2036 };
2037
2038 enum nl80211_channel_type {
2039         NL80211_CHAN_NO_HT,
2040         NL80211_CHAN_HT20,
2041         NL80211_CHAN_HT40MINUS,
2042         NL80211_CHAN_HT40PLUS
2043 };
2044
2045 /**
2046  * enum nl80211_bss - netlink attributes for a BSS
2047  *
2048  * @__NL80211_BSS_INVALID: invalid
2049  * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
2050  * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
2051  * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
2052  * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
2053  * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
2054  * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
2055  *      raw information elements from the probe response/beacon (bin);
2056  *      if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
2057  *      from a Probe Response frame; otherwise they are from a Beacon frame.
2058  *      However, if the driver does not indicate the source of the IEs, these
2059  *      IEs may be from either frame subtype.
2060  * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
2061  *      in mBm (100 * dBm) (s32)
2062  * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
2063  *      in unspecified units, scaled to 0..100 (u8)
2064  * @NL80211_BSS_STATUS: status, if this BSS is "used"
2065  * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
2066  * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
2067  *      elements from a Beacon frame (bin); not present if no Beacon frame has
2068  *      yet been received
2069  * @__NL80211_BSS_AFTER_LAST: internal
2070  * @NL80211_BSS_MAX: highest BSS attribute
2071  */
2072 enum nl80211_bss {
2073         __NL80211_BSS_INVALID,
2074         NL80211_BSS_BSSID,
2075         NL80211_BSS_FREQUENCY,
2076         NL80211_BSS_TSF,
2077         NL80211_BSS_BEACON_INTERVAL,
2078         NL80211_BSS_CAPABILITY,
2079         NL80211_BSS_INFORMATION_ELEMENTS,
2080         NL80211_BSS_SIGNAL_MBM,
2081         NL80211_BSS_SIGNAL_UNSPEC,
2082         NL80211_BSS_STATUS,
2083         NL80211_BSS_SEEN_MS_AGO,
2084         NL80211_BSS_BEACON_IES,
2085
2086         /* keep last */
2087         __NL80211_BSS_AFTER_LAST,
2088         NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
2089 };
2090
2091 /**
2092  * enum nl80211_bss_status - BSS "status"
2093  * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
2094  * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
2095  * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
2096  *
2097  * The BSS status is a BSS attribute in scan dumps, which
2098  * indicates the status the interface has wrt. this BSS.
2099  */
2100 enum nl80211_bss_status {
2101         NL80211_BSS_STATUS_AUTHENTICATED,
2102         NL80211_BSS_STATUS_ASSOCIATED,
2103         NL80211_BSS_STATUS_IBSS_JOINED,
2104 };
2105
2106 /**
2107  * enum nl80211_auth_type - AuthenticationType
2108  *
2109  * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
2110  * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
2111  * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
2112  * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
2113  * @__NL80211_AUTHTYPE_NUM: internal
2114  * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
2115  * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
2116  *      trying multiple times); this is invalid in netlink -- leave out
2117  *      the attribute for this on CONNECT commands.
2118  */
2119 enum nl80211_auth_type {
2120         NL80211_AUTHTYPE_OPEN_SYSTEM,
2121         NL80211_AUTHTYPE_SHARED_KEY,
2122         NL80211_AUTHTYPE_FT,
2123         NL80211_AUTHTYPE_NETWORK_EAP,
2124
2125         /* keep last */
2126         __NL80211_AUTHTYPE_NUM,
2127         NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
2128         NL80211_AUTHTYPE_AUTOMATIC
2129 };
2130
2131 /**
2132  * enum nl80211_key_type - Key Type
2133  * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
2134  * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
2135  * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
2136  * @NUM_NL80211_KEYTYPES: number of defined key types
2137  */
2138 enum nl80211_key_type {
2139         NL80211_KEYTYPE_GROUP,
2140         NL80211_KEYTYPE_PAIRWISE,
2141         NL80211_KEYTYPE_PEERKEY,
2142
2143         NUM_NL80211_KEYTYPES
2144 };
2145
2146 /**
2147  * enum nl80211_mfp - Management frame protection state
2148  * @NL80211_MFP_NO: Management frame protection not used
2149  * @NL80211_MFP_REQUIRED: Management frame protection required
2150  */
2151 enum nl80211_mfp {
2152         NL80211_MFP_NO,
2153         NL80211_MFP_REQUIRED,
2154 };
2155
2156 enum nl80211_wpa_versions {
2157         NL80211_WPA_VERSION_1 = 1 << 0,
2158         NL80211_WPA_VERSION_2 = 1 << 1,
2159 };
2160
2161 /**
2162  * enum nl80211_key_default_types - key default types
2163  * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
2164  * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
2165  *      unicast key
2166  * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
2167  *      multicast key
2168  * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
2169  */
2170 enum nl80211_key_default_types {
2171         __NL80211_KEY_DEFAULT_TYPE_INVALID,
2172         NL80211_KEY_DEFAULT_TYPE_UNICAST,
2173         NL80211_KEY_DEFAULT_TYPE_MULTICAST,
2174
2175         NUM_NL80211_KEY_DEFAULT_TYPES
2176 };
2177
2178 /**
2179  * enum nl80211_key_attributes - key attributes
2180  * @__NL80211_KEY_INVALID: invalid
2181  * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
2182  *      16 bytes encryption key followed by 8 bytes each for TX and RX MIC
2183  *      keys
2184  * @NL80211_KEY_IDX: key ID (u8, 0-3)
2185  * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
2186  *      section 7.3.2.25.1, e.g. 0x000FAC04)
2187  * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
2188  *      CCMP keys, each six bytes in little endian
2189  * @NL80211_KEY_DEFAULT: flag indicating default key
2190  * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
2191  * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
2192  *      specified the default depends on whether a MAC address was
2193  *      given with the command using the key or not (u32)
2194  * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
2195  *      attributes, specifying what a key should be set as default as.
2196  *      See &enum nl80211_key_default_types.
2197  * @__NL80211_KEY_AFTER_LAST: internal
2198  * @NL80211_KEY_MAX: highest key attribute
2199  */
2200 enum nl80211_key_attributes {
2201         __NL80211_KEY_INVALID,
2202         NL80211_KEY_DATA,
2203         NL80211_KEY_IDX,
2204         NL80211_KEY_CIPHER,
2205         NL80211_KEY_SEQ,
2206         NL80211_KEY_DEFAULT,
2207         NL80211_KEY_DEFAULT_MGMT,
2208         NL80211_KEY_TYPE,
2209         NL80211_KEY_DEFAULT_TYPES,
2210
2211         /* keep last */
2212         __NL80211_KEY_AFTER_LAST,
2213         NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
2214 };
2215
2216 /**
2217  * enum nl80211_tx_rate_attributes - TX rate set attributes
2218  * @__NL80211_TXRATE_INVALID: invalid
2219  * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
2220  *      in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
2221  *      1 = 500 kbps) but without the IE length restriction (at most
2222  *      %NL80211_MAX_SUPP_RATES in a single array).
2223  * @__NL80211_TXRATE_AFTER_LAST: internal
2224  * @NL80211_TXRATE_MAX: highest TX rate attribute
2225  */
2226 enum nl80211_tx_rate_attributes {
2227         __NL80211_TXRATE_INVALID,
2228         NL80211_TXRATE_LEGACY,
2229
2230         /* keep last */
2231         __NL80211_TXRATE_AFTER_LAST,
2232         NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
2233 };
2234
2235 /**
2236  * enum nl80211_band - Frequency band
2237  * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
2238  * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
2239  */
2240 enum nl80211_band {
2241         NL80211_BAND_2GHZ,
2242         NL80211_BAND_5GHZ,
2243 };
2244
2245 enum nl80211_ps_state {
2246         NL80211_PS_DISABLED,
2247         NL80211_PS_ENABLED,
2248 };
2249
2250 /**
2251  * enum nl80211_attr_cqm - connection quality monitor attributes
2252  * @__NL80211_ATTR_CQM_INVALID: invalid
2253  * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
2254  *      the threshold for the RSSI level at which an event will be sent. Zero
2255  *      to disable.
2256  * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
2257  *      the minimum amount the RSSI level must change after an event before a
2258  *      new event may be issued (to reduce effects of RSSI oscillation).
2259  * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
2260  * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
2261  *      consecutive packets were not acknowledged by the peer
2262  * @__NL80211_ATTR_CQM_AFTER_LAST: internal
2263  * @NL80211_ATTR_CQM_MAX: highest key attribute
2264  */
2265 enum nl80211_attr_cqm {
2266         __NL80211_ATTR_CQM_INVALID,
2267         NL80211_ATTR_CQM_RSSI_THOLD,
2268         NL80211_ATTR_CQM_RSSI_HYST,
2269         NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
2270         NL80211_ATTR_CQM_PKT_LOSS_EVENT,
2271
2272         /* keep last */
2273         __NL80211_ATTR_CQM_AFTER_LAST,
2274         NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
2275 };
2276
2277 /**
2278  * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
2279  * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
2280  *      configured threshold
2281  * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
2282  *      configured threshold
2283  */
2284 enum nl80211_cqm_rssi_threshold_event {
2285         NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
2286         NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
2287 };
2288
2289
2290 /**
2291  * enum nl80211_tx_power_setting - TX power adjustment
2292  * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
2293  * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
2294  * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
2295  */
2296 enum nl80211_tx_power_setting {
2297         NL80211_TX_POWER_AUTOMATIC,
2298         NL80211_TX_POWER_LIMITED,
2299         NL80211_TX_POWER_FIXED,
2300 };
2301
2302 /**
2303  * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
2304  * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
2305  * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
2306  *      a zero bit are ignored
2307  * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
2308  *      a bit for each byte in the pattern. The lowest-order bit corresponds
2309  *      to the first byte of the pattern, but the bytes of the pattern are
2310  *      in a little-endian-like format, i.e. the 9th byte of the pattern
2311  *      corresponds to the lowest-order bit in the second byte of the mask.
2312  *      For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
2313  *      xx indicates "don't care") would be represented by a pattern of
2314  *      twelve zero bytes, and a mask of "0xed,0x07".
2315  *      Note that the pattern matching is done as though frames were not
2316  *      802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
2317  *      first (including SNAP header unpacking) and then matched.
2318  * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
2319  * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
2320  */
2321 enum nl80211_wowlan_packet_pattern_attr {
2322         __NL80211_WOWLAN_PKTPAT_INVALID,
2323         NL80211_WOWLAN_PKTPAT_MASK,
2324         NL80211_WOWLAN_PKTPAT_PATTERN,
2325
2326         NUM_NL80211_WOWLAN_PKTPAT,
2327         MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
2328 };
2329
2330 /**
2331  * struct nl80211_wowlan_pattern_support - pattern support information
2332  * @max_patterns: maximum number of patterns supported
2333  * @min_pattern_len: minimum length of each pattern
2334  * @max_pattern_len: maximum length of each pattern
2335  *
2336  * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
2337  * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
2338  * capability information given by the kernel to userspace.
2339  */
2340 struct nl80211_wowlan_pattern_support {
2341         __u32 max_patterns;
2342         __u32 min_pattern_len;
2343         __u32 max_pattern_len;
2344 } __attribute__((packed));
2345
2346 /**
2347  * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
2348  * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
2349  * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
2350  *      the chip into a special state -- works best with chips that have
2351  *      support for low-power operation already (flag)
2352  * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
2353  *      is detected is implementation-specific (flag)
2354  * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
2355  *      by 16 repetitions of MAC addr, anywhere in payload) (flag)
2356  * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
2357  *      which are passed in an array of nested attributes, each nested attribute
2358  *      defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
2359  *      Each pattern defines a wakeup packet. The matching is done on the MSDU,
2360  *      i.e. as though the packet was an 802.3 packet, so the pattern matching
2361  *      is done after the packet is converted to the MSDU.
2362  *
2363  *      In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
2364  *      carrying a &struct nl80211_wowlan_pattern_support.
2365  * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
2366  *      used when setting, used only to indicate that GTK rekeying is supported
2367  *      by the device (flag)
2368  * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
2369  *      done by the device) (flag)
2370  * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
2371  *      packet (flag)
2372  * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
2373  * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
2374  *      (on devices that have rfkill in the device) (flag)
2375  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
2376  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
2377  */
2378 enum nl80211_wowlan_triggers {
2379         __NL80211_WOWLAN_TRIG_INVALID,
2380         NL80211_WOWLAN_TRIG_ANY,
2381         NL80211_WOWLAN_TRIG_DISCONNECT,
2382         NL80211_WOWLAN_TRIG_MAGIC_PKT,
2383         NL80211_WOWLAN_TRIG_PKT_PATTERN,
2384         NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
2385         NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
2386         NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
2387         NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
2388         NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
2389
2390         /* keep last */
2391         NUM_NL80211_WOWLAN_TRIG,
2392         MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
2393 };
2394
2395 /**
2396  * enum nl80211_iface_limit_attrs - limit attributes
2397  * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
2398  * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
2399  *      can be chosen from this set of interface types (u32)
2400  * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
2401  *      flag attribute for each interface type in this set
2402  * @NUM_NL80211_IFACE_LIMIT: number of attributes
2403  * @MAX_NL80211_IFACE_LIMIT: highest attribute number
2404  */
2405 enum nl80211_iface_limit_attrs {
2406         NL80211_IFACE_LIMIT_UNSPEC,
2407         NL80211_IFACE_LIMIT_MAX,
2408         NL80211_IFACE_LIMIT_TYPES,
2409
2410         /* keep last */
2411         NUM_NL80211_IFACE_LIMIT,
2412         MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
2413 };
2414
2415 /**
2416  * enum nl80211_if_combination_attrs -- interface combination attributes
2417  *
2418  * @NL80211_IFACE_COMB_UNSPEC: (reserved)
2419  * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
2420  *      for given interface types, see &enum nl80211_iface_limit_attrs.
2421  * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
2422  *      interfaces that can be created in this group. This number doesn't
2423  *      apply to interfaces purely managed in software, which are listed
2424  *      in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
2425  * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
2426  *      beacon intervals within this group must be all the same even for
2427  *      infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
2428  *      the infrastructure network's beacon interval.
2429  * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
2430  *      different channels may be used within this group.
2431  * @NUM_NL80211_IFACE_COMB: number of attributes
2432  * @MAX_NL80211_IFACE_COMB: highest attribute number
2433  *
2434  * Examples:
2435  *      limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
2436  *      => allows an AP and a STA that must match BIs
2437  *
2438  *      numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
2439  *      => allows 8 of AP/GO
2440  *
2441  *      numbers = [ #{STA} <= 2 ], channels = 2, max = 2
2442  *      => allows two STAs on different channels
2443  *
2444  *      numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
2445  *      => allows a STA plus three P2P interfaces
2446  *
2447  * The list of these four possiblities could completely be contained
2448  * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
2449  * that any of these groups must match.
2450  *
2451  * "Combinations" of just a single interface will not be listed here,
2452  * a single interface of any valid interface type is assumed to always
2453  * be possible by itself. This means that implicitly, for each valid
2454  * interface type, the following group always exists:
2455  *      numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
2456  */
2457 enum nl80211_if_combination_attrs {
2458         NL80211_IFACE_COMB_UNSPEC,
2459         NL80211_IFACE_COMB_LIMITS,
2460         NL80211_IFACE_COMB_MAXNUM,
2461         NL80211_IFACE_COMB_STA_AP_BI_MATCH,
2462         NL80211_IFACE_COMB_NUM_CHANNELS,
2463
2464         /* keep last */
2465         NUM_NL80211_IFACE_COMB,
2466         MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
2467 };
2468
2469
2470 /**
2471  * enum nl80211_plink_state - state of a mesh peer link finite state machine
2472  *
2473  * @NL80211_PLINK_LISTEN: initial state, considered the implicit
2474  *      state of non existant mesh peer links
2475  * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
2476  *      this mesh peer
2477  * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
2478  *      from this mesh peer
2479  * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
2480  *      received from this mesh peer
2481  * @NL80211_PLINK_ESTAB: mesh peer link is established
2482  * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
2483  * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
2484  *      plink are discarded
2485  * @NUM_NL80211_PLINK_STATES: number of peer link states
2486  * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
2487  */
2488 enum nl80211_plink_state {
2489         NL80211_PLINK_LISTEN,
2490         NL80211_PLINK_OPN_SNT,
2491         NL80211_PLINK_OPN_RCVD,
2492         NL80211_PLINK_CNF_RCVD,
2493         NL80211_PLINK_ESTAB,
2494         NL80211_PLINK_HOLDING,
2495         NL80211_PLINK_BLOCKED,
2496
2497         /* keep last */
2498         NUM_NL80211_PLINK_STATES,
2499         MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
2500 };
2501
2502 #define NL80211_KCK_LEN                 16
2503 #define NL80211_KEK_LEN                 16
2504 #define NL80211_REPLAY_CTR_LEN          8
2505
2506 /**
2507  * enum nl80211_rekey_data - attributes for GTK rekey offload
2508  * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
2509  * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
2510  * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
2511  * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
2512  * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
2513  * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
2514  */
2515 enum nl80211_rekey_data {
2516         __NL80211_REKEY_DATA_INVALID,
2517         NL80211_REKEY_DATA_KEK,
2518         NL80211_REKEY_DATA_KCK,
2519         NL80211_REKEY_DATA_REPLAY_CTR,
2520
2521         /* keep last */
2522         NUM_NL80211_REKEY_DATA,
2523         MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
2524 };
2525
2526 /**
2527  * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
2528  * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
2529  *      Beacon frames)
2530  * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
2531  *      in Beacon frames
2532  * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
2533  *      element in Beacon frames but zero out each byte in the SSID
2534  */
2535 enum nl80211_hidden_ssid {
2536         NL80211_HIDDEN_SSID_NOT_IN_USE,
2537         NL80211_HIDDEN_SSID_ZERO_LEN,
2538         NL80211_HIDDEN_SSID_ZERO_CONTENTS
2539 };
2540
2541 /**
2542  * enum nl80211_sta_wme_attr - station WME attributes
2543  * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
2544  * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
2545  *      is the same as the AC bitmap in the QoS info field.
2546  * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
2547  *      as the MAX_SP field in the QoS info field (but already shifted down).
2548  * @__NL80211_STA_WME_AFTER_LAST: internal
2549  * @NL80211_STA_WME_MAX: highest station WME attribute
2550  */
2551 enum nl80211_sta_wme_attr {
2552         __NL80211_STA_WME_INVALID,
2553         NL80211_STA_WME_UAPSD_QUEUES,
2554         NL80211_STA_WME_MAX_SP,
2555
2556         /* keep last */
2557         __NL80211_STA_WME_AFTER_LAST,
2558         NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
2559 };
2560
2561 #endif /* __LINUX_NL80211_H */