1 /* SPDX-License-Identifier: GPL-2.0 */
5 * linux/include/linux/ide.h
7 * Copyright (C) 1994-2002 Linus Torvalds & authors
10 #include <linux/init.h>
11 #include <linux/ioport.h>
12 #include <linux/ata.h>
13 #include <linux/blk-mq.h>
14 #include <linux/proc_fs.h>
15 #include <linux/interrupt.h>
16 #include <linux/bitops.h>
17 #include <linux/bio.h>
18 #include <linux/pci.h>
19 #include <linux/completion.h>
21 #include <linux/mutex.h>
22 /* for request_sense */
23 #include <linux/cdrom.h>
24 #include <scsi/scsi_cmnd.h>
25 #include <asm/byteorder.h>
29 * Probably not wise to fiddle with these
31 #define SUPPORT_VLB_SYNC 1
32 #define IDE_DEFAULT_MAX_FAILURES 1
33 #define ERROR_MAX 8 /* Max read/write errors per sector */
34 #define ERROR_RESET 3 /* Reset controller every 4th retry */
35 #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
39 /* values for ide_request.type */
44 ATA_PRIV_SENSE, /* sense request */
45 ATA_PRIV_PM_SUSPEND, /* suspend request */
46 ATA_PRIV_PM_RESUME, /* resume request */
50 struct scsi_request sreq;
51 u8 sense[SCSI_SENSE_BUFFERSIZE];
56 static inline struct ide_request *ide_req(struct request *rq)
58 return blk_mq_rq_to_pdu(rq);
61 static inline bool ata_misc_request(struct request *rq)
63 return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_MISC;
66 static inline bool ata_taskfile_request(struct request *rq)
68 return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_TASKFILE;
71 static inline bool ata_pc_request(struct request *rq)
73 return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_PC;
76 static inline bool ata_sense_request(struct request *rq)
78 return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_SENSE;
81 static inline bool ata_pm_request(struct request *rq)
83 return blk_rq_is_private(rq) &&
84 (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND ||
85 ide_req(rq)->type == ATA_PRIV_PM_RESUME);
88 /* Error codes returned in result to the higher part of the driver. */
90 IDE_DRV_ERROR_GENERAL = 101,
91 IDE_DRV_ERROR_FILEMARK = 102,
92 IDE_DRV_ERROR_EOD = 103,
96 * Definitions for accessing IDE controller registers
98 #define IDE_NR_PORTS (10)
100 struct ide_io_ports {
101 unsigned long data_addr;
104 unsigned long error_addr; /* read: error */
105 unsigned long feature_addr; /* write: feature */
108 unsigned long nsect_addr;
109 unsigned long lbal_addr;
110 unsigned long lbam_addr;
111 unsigned long lbah_addr;
113 unsigned long device_addr;
116 unsigned long status_addr; /* read: status */
117 unsigned long command_addr; /* write: command */
120 unsigned long ctl_addr;
122 unsigned long irq_addr;
125 #define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
127 #define BAD_R_STAT (ATA_BUSY | ATA_ERR)
128 #define BAD_W_STAT (BAD_R_STAT | ATA_DF)
129 #define BAD_STAT (BAD_R_STAT | ATA_DRQ)
130 #define DRIVE_READY (ATA_DRDY | ATA_DSC)
132 #define BAD_CRC (ATA_ABORTED | ATA_ICRC)
134 #define SATA_NR_PORTS (3) /* 16 possible ?? */
136 #define SATA_STATUS_OFFSET (0)
137 #define SATA_ERROR_OFFSET (1)
138 #define SATA_CONTROL_OFFSET (2)
141 * Our Physical Region Descriptor (PRD) table should be large enough
142 * to handle the biggest I/O request we are likely to see. Since requests
143 * can have no more than 256 sectors, and since the typical blocksize is
144 * two or more sectors, we could get by with a limit of 128 entries here for
145 * the usual worst case. Most requests seem to include some contiguous blocks,
146 * further reducing the number of table entries required.
148 * The driver reverts to PIO mode for individual requests that exceed
149 * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
150 * 100% of all crazy scenarios here is not necessary.
152 * As it turns out though, we must allocate a full 4KB page for this,
153 * so the two PRD tables (ide0 & ide1) will each get half of that,
154 * allowing each to have about 256 entries (8 bytes each) from this.
157 #define PRD_ENTRIES 256
160 * Some more useful definitions
162 #define PARTN_BITS 6 /* number of minor dev bits for partitions */
163 #define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
166 * Timeouts for various operations:
169 /* spec allows up to 20ms, but CF cards and SSD drives need more */
170 WAIT_DRQ = 1 * HZ, /* 1s */
171 /* some laptops are very slow */
172 WAIT_READY = 5 * HZ, /* 5s */
173 /* should be less than 3ms (?), if all ATAPI CD is closed at boot */
174 WAIT_PIDENTIFY = 10 * HZ, /* 10s */
175 /* worst case when spinning up */
176 WAIT_WORSTCASE = 30 * HZ, /* 30s */
177 /* maximum wait for an IRQ to happen */
178 WAIT_CMD = 10 * HZ, /* 10s */
179 /* Some drives require a longer IRQ timeout. */
180 WAIT_FLOPPY_CMD = 50 * HZ, /* 50s */
182 * Some drives (for example, Seagate STT3401A Travan) require a very
183 * long timeout, because they don't return an interrupt or clear their
184 * BSY bit until after the command completes (even retension commands).
186 WAIT_TAPE_CMD = 900 * HZ, /* 900s */
187 /* minimum sleep time */
188 WAIT_MIN_SLEEP = HZ / 50, /* 20ms */
192 * Op codes for special requests to be handled by ide_special_rq().
193 * Values should be in the range of 0x20 to 0x3f.
195 #define REQ_DRIVE_RESET 0x20
196 #define REQ_DEVSET_EXEC 0x21
197 #define REQ_PARK_HEADS 0x22
198 #define REQ_UNPARK_HEADS 0x23
201 * hwif_chipset_t is used to keep track of the specific hardware
202 * chipset used by each IDE interface, if known.
204 enum { ide_unknown, ide_generic, ide_pci,
205 ide_cmd640, ide_dtc2278, ide_ali14xx,
206 ide_qd65xx, ide_umc8672, ide_ht6560b,
207 ide_4drives, ide_pmac, ide_acorn,
208 ide_au1xxx, ide_palm3710
211 typedef u8 hwif_chipset_t;
214 * Structure to hold all information about the location of this port
218 struct ide_io_ports io_ports;
219 unsigned long io_ports_array[IDE_NR_PORTS];
222 int irq; /* our irq number */
223 struct device *dev, *parent;
224 unsigned long config;
227 static inline void ide_std_init_ports(struct ide_hw *hw,
228 unsigned long io_addr,
229 unsigned long ctl_addr)
233 for (i = 0; i <= 7; i++)
234 hw->io_ports_array[i] = io_addr++;
236 hw->io_ports.ctl_addr = ctl_addr;
242 * Now for the data we need to maintain per-drive: ide_drive_t
245 #define ide_scsi 0x21
246 #define ide_disk 0x20
247 #define ide_optical 0x7
248 #define ide_cdrom 0x5
250 #define ide_floppy 0x0
253 * Special Driver Flags
256 IDE_SFLAG_SET_GEOMETRY = BIT(0),
257 IDE_SFLAG_RECALIBRATE = BIT(1),
258 IDE_SFLAG_SET_MULTMODE = BIT(2),
262 * Status returned from various ide_ functions
265 ide_stopped, /* no drive operation was started */
266 ide_started, /* a drive operation was started, handler was set */
270 IDE_VALID_ERROR = BIT(1),
271 IDE_VALID_FEATURE = IDE_VALID_ERROR,
272 IDE_VALID_NSECT = BIT(2),
273 IDE_VALID_LBAL = BIT(3),
274 IDE_VALID_LBAM = BIT(4),
275 IDE_VALID_LBAH = BIT(5),
276 IDE_VALID_DEVICE = BIT(6),
277 IDE_VALID_LBA = IDE_VALID_LBAL |
280 IDE_VALID_OUT_TF = IDE_VALID_FEATURE |
283 IDE_VALID_IN_TF = IDE_VALID_NSECT |
285 IDE_VALID_OUT_HOB = IDE_VALID_OUT_TF,
286 IDE_VALID_IN_HOB = IDE_VALID_ERROR |
292 IDE_TFLAG_LBA48 = BIT(0),
293 IDE_TFLAG_WRITE = BIT(1),
294 IDE_TFLAG_CUSTOM_HANDLER = BIT(2),
295 IDE_TFLAG_DMA_PIO_FALLBACK = BIT(3),
296 /* force 16-bit I/O operations */
297 IDE_TFLAG_IO_16BIT = BIT(4),
298 /* struct ide_cmd was allocated using kmalloc() */
299 IDE_TFLAG_DYN = BIT(5),
300 IDE_TFLAG_FS = BIT(6),
301 IDE_TFLAG_MULTI_PIO = BIT(7),
302 IDE_TFLAG_SET_XFER = BIT(8),
306 IDE_FTFLAG_FLAGGED = BIT(0),
307 IDE_FTFLAG_SET_IN_FLAGS = BIT(1),
308 IDE_FTFLAG_OUT_DATA = BIT(2),
309 IDE_FTFLAG_IN_DATA = BIT(3),
312 struct ide_taskfile {
313 u8 data; /* 0: data byte (for TASKFILE ioctl) */
315 u8 error; /* read: error */
316 u8 feature; /* write: feature */
318 u8 nsect; /* 2: number of sectors */
319 u8 lbal; /* 3: LBA low */
320 u8 lbam; /* 4: LBA mid */
321 u8 lbah; /* 5: LBA high */
322 u8 device; /* 6: device select */
324 u8 status; /* read: status */
325 u8 command; /* write: command */
330 struct ide_taskfile tf;
331 struct ide_taskfile hob;
340 u8 ftf_flags; /* for TASKFILE ioctl */
343 int sg_nents; /* number of sg entries */
345 int sg_dma_direction; /* DMA transfer direction */
349 unsigned int last_xfer_len;
351 struct scatterlist *cursg;
352 unsigned int cursg_ofs;
354 struct request *rq; /* copy of request */
357 /* ATAPI packet command flags */
359 /* set when an error is considered normal - no retry (ide-tape) */
360 PC_FLAG_ABORT = BIT(0),
361 PC_FLAG_SUPPRESS_ERROR = BIT(1),
362 PC_FLAG_WAIT_FOR_DSC = BIT(2),
363 PC_FLAG_DMA_OK = BIT(3),
364 PC_FLAG_DMA_IN_PROGRESS = BIT(4),
365 PC_FLAG_DMA_ERROR = BIT(5),
366 PC_FLAG_WRITING = BIT(6),
369 #define ATAPI_WAIT_PC (60 * HZ)
371 struct ide_atapi_pc {
372 /* actual packet bytes */
374 /* incremented on each retry */
378 /* bytes to transfer */
381 /* the corresponding request */
387 * those are more or less driver-specific and some of them are subject
388 * to change/removal later.
390 unsigned long timeout;
396 #ifdef CONFIG_BLK_DEV_IDEACPI
397 struct ide_acpi_drive_link;
398 struct ide_acpi_hwif_link;
403 struct ide_disk_ops {
404 int (*check)(struct ide_drive_s *, const char *);
405 int (*get_capacity)(struct ide_drive_s *);
406 void (*unlock_native_capacity)(struct ide_drive_s *);
407 void (*setup)(struct ide_drive_s *);
408 void (*flush)(struct ide_drive_s *);
409 int (*init_media)(struct ide_drive_s *, struct gendisk *);
410 int (*set_doorlock)(struct ide_drive_s *, struct gendisk *,
412 ide_startstop_t (*do_request)(struct ide_drive_s *, struct request *,
414 int (*ioctl)(struct ide_drive_s *, struct block_device *,
415 fmode_t, unsigned int, unsigned long);
416 int (*compat_ioctl)(struct ide_drive_s *, struct block_device *,
417 fmode_t, unsigned int, unsigned long);
420 /* ATAPI device flags */
422 IDE_AFLAG_DRQ_INTERRUPT = BIT(0),
425 /* Drive cannot eject the disc. */
426 IDE_AFLAG_NO_EJECT = BIT(1),
427 /* Drive is a pre ATAPI 1.2 drive. */
428 IDE_AFLAG_PRE_ATAPI12 = BIT(2),
429 /* TOC addresses are in BCD. */
430 IDE_AFLAG_TOCADDR_AS_BCD = BIT(3),
431 /* TOC track numbers are in BCD. */
432 IDE_AFLAG_TOCTRACKS_AS_BCD = BIT(4),
433 /* Saved TOC information is current. */
434 IDE_AFLAG_TOC_VALID = BIT(6),
435 /* We think that the drive door is locked. */
436 IDE_AFLAG_DOOR_LOCKED = BIT(7),
437 /* SET_CD_SPEED command is unsupported. */
438 IDE_AFLAG_NO_SPEED_SELECT = BIT(8),
439 IDE_AFLAG_VERTOS_300_SSD = BIT(9),
440 IDE_AFLAG_VERTOS_600_ESD = BIT(10),
441 IDE_AFLAG_SANYO_3CD = BIT(11),
442 IDE_AFLAG_FULL_CAPS_PAGE = BIT(12),
443 IDE_AFLAG_PLAY_AUDIO_OK = BIT(13),
444 IDE_AFLAG_LE_SPEED_FIELDS = BIT(14),
447 /* Avoid commands not supported in Clik drive */
448 IDE_AFLAG_CLIK_DRIVE = BIT(15),
449 /* Requires BH algorithm for packets */
450 IDE_AFLAG_ZIP_DRIVE = BIT(16),
451 /* Supports format progress report */
452 IDE_AFLAG_SRFP = BIT(17),
455 IDE_AFLAG_IGNORE_DSC = BIT(18),
456 /* 0 When the tape position is unknown */
457 IDE_AFLAG_ADDRESS_VALID = BIT(19),
458 /* Device already opened */
459 IDE_AFLAG_BUSY = BIT(20),
460 /* Attempt to auto-detect the current user block size */
461 IDE_AFLAG_DETECT_BS = BIT(21),
462 /* Currently on a filemark */
463 IDE_AFLAG_FILEMARK = BIT(22),
464 /* 0 = no tape is loaded, so we don't rewind after ejecting */
465 IDE_AFLAG_MEDIUM_PRESENT = BIT(23),
467 IDE_AFLAG_NO_AUTOCLOSE = BIT(24),
472 /* restore settings after device reset */
473 IDE_DFLAG_KEEP_SETTINGS = BIT(0),
474 /* device is using DMA for read/write */
475 IDE_DFLAG_USING_DMA = BIT(1),
476 /* okay to unmask other IRQs */
477 IDE_DFLAG_UNMASK = BIT(2),
478 /* don't attempt flushes */
479 IDE_DFLAG_NOFLUSH = BIT(3),
481 IDE_DFLAG_DSC_OVERLAP = BIT(4),
482 /* give potential excess bandwidth */
483 IDE_DFLAG_NICE1 = BIT(5),
484 /* device is physically present */
485 IDE_DFLAG_PRESENT = BIT(6),
486 /* disable Host Protected Area */
487 IDE_DFLAG_NOHPA = BIT(7),
488 /* id read from device (synthetic if not set) */
489 IDE_DFLAG_ID_READ = BIT(8),
490 IDE_DFLAG_NOPROBE = BIT(9),
491 /* need to do check_media_change() */
492 IDE_DFLAG_REMOVABLE = BIT(10),
493 IDE_DFLAG_FORCED_GEOM = BIT(12),
494 /* disallow setting unmask bit */
495 IDE_DFLAG_NO_UNMASK = BIT(13),
496 /* disallow enabling 32-bit I/O */
497 IDE_DFLAG_NO_IO_32BIT = BIT(14),
498 /* for removable only: door lock/unlock works */
499 IDE_DFLAG_DOORLOCKING = BIT(15),
501 IDE_DFLAG_NODMA = BIT(16),
502 /* powermanagement told us not to do anything, so sleep nicely */
503 IDE_DFLAG_BLOCKED = BIT(17),
504 /* sleeping & sleep field valid */
505 IDE_DFLAG_SLEEPING = BIT(18),
506 IDE_DFLAG_POST_RESET = BIT(19),
507 IDE_DFLAG_UDMA33_WARNED = BIT(20),
508 IDE_DFLAG_LBA48 = BIT(21),
509 /* status of write cache */
510 IDE_DFLAG_WCACHE = BIT(22),
511 /* used for ignoring ATA_DF */
512 IDE_DFLAG_NOWERR = BIT(23),
513 /* retrying in PIO */
514 IDE_DFLAG_DMA_PIO_RETRY = BIT(24),
515 IDE_DFLAG_LBA = BIT(25),
516 /* don't unload heads */
517 IDE_DFLAG_NO_UNLOAD = BIT(26),
518 /* heads unloaded, please don't reset port */
519 IDE_DFLAG_PARKED = BIT(27),
520 IDE_DFLAG_MEDIA_CHANGED = BIT(28),
522 IDE_DFLAG_WP = BIT(29),
523 IDE_DFLAG_FORMAT_IN_PROGRESS = BIT(30),
524 IDE_DFLAG_NIEN_QUIRK = BIT(31),
528 char name[4]; /* drive name, such as "hda" */
529 char driver_req[10]; /* requests specific driver */
531 struct request_queue *queue; /* request queue */
533 bool (*prep_rq)(struct ide_drive_s *, struct request *);
535 struct blk_mq_tag_set tag_set;
537 struct request *rq; /* current request */
538 void *driver_data; /* extra driver data */
539 u16 *id; /* identification info */
540 #ifdef CONFIG_IDE_PROC_FS
541 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
542 const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */
544 struct hwif_s *hwif; /* actually (ide_hwif_t *) */
546 const struct ide_disk_ops *disk_ops;
548 unsigned long dev_flags;
550 unsigned long sleep; /* sleep until this time */
551 unsigned long timeout; /* max time to wait for irq */
553 u8 special_flags; /* special action flags */
555 u8 select; /* basic drive/head select reg value */
556 u8 retry_pio; /* retrying dma capable host in pio */
557 u8 waiting_for_dma; /* dma currently in progress */
558 u8 dma; /* atapi dma flag */
560 u8 init_speed; /* transfer rate set at boot */
561 u8 current_speed; /* current transfer rate set */
562 u8 desired_speed; /* desired transfer rate set */
563 u8 pio_mode; /* for ->set_pio_mode _only_ */
564 u8 dma_mode; /* for ->set_dma_mode _only_ */
565 u8 dn; /* now wide spread use */
566 u8 acoustic; /* acoustic management */
567 u8 media; /* disk, cdrom, tape, floppy, ... */
568 u8 ready_stat; /* min status value for drive ready */
569 u8 mult_count; /* current multiple sector setting */
570 u8 mult_req; /* requested multiple sector setting */
571 u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
572 u8 bad_wstat; /* used for ignoring ATA_DF */
573 u8 head; /* "real" number of heads */
574 u8 sect; /* "real" sectors per track */
575 u8 bios_head; /* BIOS/fdisk/LILO number of heads */
576 u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */
578 /* delay this long before sending packet command */
581 unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
582 unsigned int cyl; /* "real" number of cyls */
583 void *drive_data; /* used by set_pio_mode/dev_select() */
584 unsigned int failures; /* current failure count */
585 unsigned int max_failures; /* maximum allowed failure count */
586 u64 probed_capacity;/* initial/native media capacity */
587 u64 capacity64; /* total number of sectors */
589 int lun; /* logical unit */
590 int crc_count; /* crc counter to reduce drive speed */
592 unsigned long debug_mask; /* debugging levels switch */
594 #ifdef CONFIG_BLK_DEV_IDEACPI
595 struct ide_acpi_drive_link *acpidata;
597 struct list_head list;
598 struct device gendev;
599 struct completion gendev_rel_comp; /* to deal with device release() */
601 /* current packet command */
602 struct ide_atapi_pc *pc;
604 /* last failed packet command */
605 struct ide_atapi_pc *failed_pc;
607 /* callback for packet commands */
608 int (*pc_callback)(struct ide_drive_s *, int);
610 ide_startstop_t (*irq_handler)(struct ide_drive_s *);
612 unsigned long atapi_flags;
614 struct ide_atapi_pc request_sense_pc;
616 /* current sense rq and buffer */
618 bool sense_rq_active;
619 struct request *sense_rq;
620 struct request_sense sense_data;
622 /* async sense insertion */
623 struct work_struct rq_work;
624 struct list_head rq_list;
627 typedef struct ide_drive_s ide_drive_t;
629 #define to_ide_device(dev) container_of(dev, ide_drive_t, gendev)
631 #define to_ide_drv(obj, cont_type) \
632 container_of(obj, struct cont_type, dev)
634 #define ide_drv_g(disk, cont_type) \
635 container_of((disk)->private_data, struct cont_type, driver)
637 struct ide_port_info;
640 void (*exec_command)(struct hwif_s *, u8);
641 u8 (*read_status)(struct hwif_s *);
642 u8 (*read_altstatus)(struct hwif_s *);
643 void (*write_devctl)(struct hwif_s *, u8);
645 void (*dev_select)(ide_drive_t *);
646 void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8);
647 void (*tf_read)(ide_drive_t *, struct ide_taskfile *, u8);
649 void (*input_data)(ide_drive_t *, struct ide_cmd *,
650 void *, unsigned int);
651 void (*output_data)(ide_drive_t *, struct ide_cmd *,
652 void *, unsigned int);
655 extern const struct ide_tp_ops default_tp_ops;
658 * struct ide_port_ops - IDE port operations
660 * @init_dev: host specific initialization of a device
661 * @set_pio_mode: routine to program host for PIO mode
662 * @set_dma_mode: routine to program host for DMA mode
663 * @reset_poll: chipset polling based on hba specifics
664 * @pre_reset: chipset specific changes to default for device-hba resets
665 * @resetproc: routine to reset controller after a disk reset
666 * @maskproc: special host masking for drive selection
667 * @quirkproc: check host's drive quirk list
668 * @clear_irq: clear IRQ
670 * @mdma_filter: filter MDMA modes
671 * @udma_filter: filter UDMA modes
673 * @cable_detect: detect cable type
675 struct ide_port_ops {
676 void (*init_dev)(ide_drive_t *);
677 void (*set_pio_mode)(struct hwif_s *, ide_drive_t *);
678 void (*set_dma_mode)(struct hwif_s *, ide_drive_t *);
679 blk_status_t (*reset_poll)(ide_drive_t *);
680 void (*pre_reset)(ide_drive_t *);
681 void (*resetproc)(ide_drive_t *);
682 void (*maskproc)(ide_drive_t *, int);
683 void (*quirkproc)(ide_drive_t *);
684 void (*clear_irq)(ide_drive_t *);
685 int (*test_irq)(struct hwif_s *);
687 u8 (*mdma_filter)(ide_drive_t *);
688 u8 (*udma_filter)(ide_drive_t *);
690 u8 (*cable_detect)(struct hwif_s *);
694 void (*dma_host_set)(struct ide_drive_s *, int);
695 int (*dma_setup)(struct ide_drive_s *, struct ide_cmd *);
696 void (*dma_start)(struct ide_drive_s *);
697 int (*dma_end)(struct ide_drive_s *);
698 int (*dma_test_irq)(struct ide_drive_s *);
699 void (*dma_lost_irq)(struct ide_drive_s *);
700 /* below ones are optional */
701 int (*dma_check)(struct ide_drive_s *, struct ide_cmd *);
702 int (*dma_timer_expiry)(struct ide_drive_s *);
703 void (*dma_clear)(struct ide_drive_s *);
705 * The following method is optional and only required to be
706 * implemented for the SFF-8038i compatible controllers.
708 u8 (*dma_sff_read_status)(struct hwif_s *);
712 IDE_PFLAG_PROBING = BIT(0),
717 typedef struct hwif_s {
718 struct hwif_s *mate; /* other hwif from same PCI chip */
719 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
721 struct ide_host *host;
723 char name[6]; /* name of interface, eg. "ide0" */
725 struct ide_io_ports io_ports;
727 unsigned long sata_scr[SATA_NR_PORTS];
729 ide_drive_t *devices[MAX_DRIVES + 1];
731 unsigned long port_flags;
733 u8 major; /* our major number */
734 u8 index; /* 0 for ide0; 1 for ide1; ... */
735 u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
745 u8 cbl; /* cable type */
747 hwif_chipset_t chipset; /* sub-module for tuning.. */
751 void (*rw_disk)(ide_drive_t *, struct request *);
753 const struct ide_tp_ops *tp_ops;
754 const struct ide_port_ops *port_ops;
755 const struct ide_dma_ops *dma_ops;
757 /* dma physical region descriptor table (cpu view) */
758 unsigned int *dmatable_cpu;
759 /* dma physical region descriptor table (dma view) */
760 dma_addr_t dmatable_dma;
762 /* maximum number of PRD table entries */
764 /* PRD entry size in bytes */
767 /* Scatter-gather list used to build the above */
768 struct scatterlist *sg_table;
769 int sg_max_nents; /* Maximum number of entries in it */
771 struct ide_cmd cmd; /* current command */
773 int rqsize; /* max sectors per request */
774 int irq; /* our irq number */
776 unsigned long dma_base; /* base addr for dma ports */
778 unsigned long config_data; /* for use by chipset-specific code */
779 unsigned long select_data; /* for use by chipset-specific code */
781 unsigned long extra_base; /* extra addr for dma ports */
782 unsigned extra_ports; /* number of extra dma ports */
784 unsigned present : 1; /* this interface exists */
785 unsigned busy : 1; /* serializes devices on a port */
787 struct device gendev;
788 struct device *portdev;
790 struct completion gendev_rel_comp; /* To deal with device release() */
792 void *hwif_data; /* extra hwif data */
794 #ifdef CONFIG_BLK_DEV_IDEACPI
795 struct ide_acpi_hwif_link *acpidata;
798 /* IRQ handler, if active */
799 ide_startstop_t (*handler)(ide_drive_t *);
801 /* BOOL: polling active & poll_timeout field valid */
802 unsigned int polling : 1;
805 ide_drive_t *cur_dev;
807 /* current request */
811 struct timer_list timer;
812 /* timeout value during long polls */
813 unsigned long poll_timeout;
814 /* queried upon timeouts */
815 int (*expiry)(ide_drive_t *);
821 } ____cacheline_internodealigned_in_smp ide_hwif_t;
823 #define MAX_HOST_PORTS 4
826 ide_hwif_t *ports[MAX_HOST_PORTS + 1];
827 unsigned int n_ports;
828 struct device *dev[2];
830 int (*init_chipset)(struct pci_dev *);
832 void (*get_lock)(irq_handler_t, void *);
833 void (*release_lock)(void);
835 irq_handler_t irq_handler;
837 unsigned long host_flags;
842 ide_hwif_t *cur_port; /* for hosts requiring serialization */
844 /* used for hosts requiring serialization */
845 volatile unsigned long host_busy;
848 #define IDE_HOST_BUSY 0
851 * internal ide interrupt handler type
853 typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
854 typedef int (ide_expiry_t)(ide_drive_t *);
856 /* used by ide-cd, ide-floppy, etc. */
857 typedef void (xfer_func_t)(ide_drive_t *, struct ide_cmd *, void *, unsigned);
859 extern struct mutex ide_setting_mtx;
862 * configurable drive settings
865 #define DS_SYNC BIT(0)
868 int (*get)(ide_drive_t *);
869 int (*set)(ide_drive_t *, int);
873 #define __DEVSET(_flags, _get, _set) { \
879 #define ide_devset_get(name, field) \
880 static int get_##name(ide_drive_t *drive) \
882 return drive->field; \
885 #define ide_devset_set(name, field) \
886 static int set_##name(ide_drive_t *drive, int arg) \
888 drive->field = arg; \
892 #define ide_devset_get_flag(name, flag) \
893 static int get_##name(ide_drive_t *drive) \
895 return !!(drive->dev_flags & flag); \
898 #define ide_devset_set_flag(name, flag) \
899 static int set_##name(ide_drive_t *drive, int arg) \
902 drive->dev_flags |= flag; \
904 drive->dev_flags &= ~flag; \
908 #define __IDE_DEVSET(_name, _flags, _get, _set) \
909 const struct ide_devset ide_devset_##_name = \
910 __DEVSET(_flags, _get, _set)
912 #define IDE_DEVSET(_name, _flags, _get, _set) \
913 static __IDE_DEVSET(_name, _flags, _get, _set)
915 #define ide_devset_rw(_name, _func) \
916 IDE_DEVSET(_name, 0, get_##_func, set_##_func)
918 #define ide_devset_w(_name, _func) \
919 IDE_DEVSET(_name, 0, NULL, set_##_func)
921 #define ide_ext_devset_rw(_name, _func) \
922 __IDE_DEVSET(_name, 0, get_##_func, set_##_func)
924 #define ide_ext_devset_rw_sync(_name, _func) \
925 __IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
927 #define ide_decl_devset(_name) \
928 extern const struct ide_devset ide_devset_##_name
930 ide_decl_devset(io_32bit);
931 ide_decl_devset(keepsettings);
932 ide_decl_devset(pio_mode);
933 ide_decl_devset(unmaskirq);
934 ide_decl_devset(using_dma);
936 #ifdef CONFIG_IDE_PROC_FS
938 * /proc/ide interface
941 #define ide_devset_rw_field(_name, _field) \
942 ide_devset_get(_name, _field); \
943 ide_devset_set(_name, _field); \
944 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
946 #define ide_devset_ro_field(_name, _field) \
947 ide_devset_get(_name, _field); \
948 IDE_DEVSET(_name, 0, get_##_name, NULL)
950 #define ide_devset_rw_flag(_name, _field) \
951 ide_devset_get_flag(_name, _field); \
952 ide_devset_set_flag(_name, _field); \
953 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
955 struct ide_proc_devset {
957 const struct ide_devset *setting;
959 int (*mulf)(ide_drive_t *);
960 int (*divf)(ide_drive_t *);
963 #define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
964 .name = __stringify(_name), \
965 .setting = &ide_devset_##_name, \
972 #define IDE_PROC_DEVSET(_name, _min, _max) \
973 __IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
978 int (*show)(struct seq_file *, void *);
981 void proc_ide_create(void);
982 void proc_ide_destroy(void);
983 void ide_proc_register_port(ide_hwif_t *);
984 void ide_proc_port_register_devices(ide_hwif_t *);
985 void ide_proc_unregister_device(ide_drive_t *);
986 void ide_proc_unregister_port(ide_hwif_t *);
987 void ide_proc_register_driver(ide_drive_t *, struct ide_driver *);
988 void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *);
990 int ide_capacity_proc_show(struct seq_file *m, void *v);
991 int ide_geometry_proc_show(struct seq_file *m, void *v);
993 static inline void proc_ide_create(void) { ; }
994 static inline void proc_ide_destroy(void) { ; }
995 static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
996 static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
997 static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
998 static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
999 static inline void ide_proc_register_driver(ide_drive_t *drive,
1000 struct ide_driver *driver) { ; }
1001 static inline void ide_proc_unregister_driver(ide_drive_t *drive,
1002 struct ide_driver *driver) { ; }
1006 /* enter/exit functions */
1007 IDE_DBG_FUNC = BIT(0),
1008 /* sense key/asc handling */
1009 IDE_DBG_SENSE = BIT(1),
1010 /* packet commands handling */
1011 IDE_DBG_PC = BIT(2),
1012 /* request handling */
1013 IDE_DBG_RQ = BIT(3),
1014 /* driver probing/setup */
1015 IDE_DBG_PROBE = BIT(4),
1018 /* DRV_NAME has to be defined in the driver before using the macro below */
1019 #define __ide_debug_log(lvl, fmt, args...) \
1021 if (unlikely(drive->debug_mask & lvl)) \
1022 printk(KERN_INFO DRV_NAME ": %s: " fmt "\n", \
1023 __func__, ## args); \
1027 * Power Management state machine (rq->pm->pm_step).
1029 * For each step, the core calls ide_start_power_step() first.
1031 * - ide_stopped : In this case, the core calls us back again unless
1032 * step have been set to ide_power_state_completed.
1033 * - ide_started : In this case, the channel is left busy until an
1034 * async event (interrupt) occurs.
1035 * Typically, ide_start_power_step() will issue a taskfile request with
1038 * Upon reception of the interrupt, the core will call ide_complete_power_step()
1039 * with the error code if any. This routine should update the step value
1040 * and return. It should not start a new request. The core will call
1041 * ide_start_power_step() for the new step value, unless step have been
1042 * set to IDE_PM_COMPLETED.
1045 IDE_PM_START_SUSPEND,
1046 IDE_PM_FLUSH_CACHE = IDE_PM_START_SUSPEND,
1049 IDE_PM_START_RESUME,
1050 IDE_PM_RESTORE_PIO = IDE_PM_START_RESUME,
1057 int generic_ide_suspend(struct device *, pm_message_t);
1058 int generic_ide_resume(struct device *);
1060 void ide_complete_power_step(ide_drive_t *, struct request *);
1061 ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *);
1062 void ide_complete_pm_rq(ide_drive_t *, struct request *);
1063 void ide_check_pm_state(ide_drive_t *, struct request *);
1066 * Subdrivers support.
1068 * The gendriver.owner field should be set to the module owner of this driver.
1069 * The gendriver.name field should be set to the name of this driver
1072 const char *version;
1073 ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
1074 struct device_driver gen_driver;
1075 int (*probe)(ide_drive_t *);
1076 void (*remove)(ide_drive_t *);
1077 void (*resume)(ide_drive_t *);
1078 void (*shutdown)(ide_drive_t *);
1079 #ifdef CONFIG_IDE_PROC_FS
1080 ide_proc_entry_t * (*proc_entries)(ide_drive_t *);
1081 const struct ide_proc_devset * (*proc_devsets)(ide_drive_t *);
1085 #define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver)
1087 int ide_device_get(ide_drive_t *);
1088 void ide_device_put(ide_drive_t *);
1090 struct ide_ioctl_devset {
1091 unsigned int get_ioctl;
1092 unsigned int set_ioctl;
1093 const struct ide_devset *setting;
1096 int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int,
1097 unsigned long, const struct ide_ioctl_devset *);
1099 int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned long);
1101 extern int ide_vlb_clk;
1102 extern int ide_pci_clk;
1104 int ide_end_rq(ide_drive_t *, struct request *, blk_status_t, unsigned int);
1105 void ide_kill_rq(ide_drive_t *, struct request *);
1106 void ide_insert_request_head(ide_drive_t *, struct request *);
1108 void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
1109 void ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
1111 void ide_execute_command(ide_drive_t *, struct ide_cmd *, ide_handler_t *,
1114 void ide_pad_transfer(ide_drive_t *, int, int);
1116 ide_startstop_t ide_error(ide_drive_t *, const char *, u8);
1118 void ide_fix_driveid(u16 *);
1120 extern void ide_fixstring(u8 *, const int, const int);
1122 int ide_busy_sleep(ide_drive_t *, unsigned long, int);
1124 int __ide_wait_stat(ide_drive_t *, u8, u8, unsigned long, u8 *);
1125 int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
1127 ide_startstop_t ide_do_park_unpark(ide_drive_t *, struct request *);
1128 ide_startstop_t ide_do_devset(ide_drive_t *, struct request *);
1130 extern ide_startstop_t ide_do_reset (ide_drive_t *);
1132 extern int ide_devset_execute(ide_drive_t *drive,
1133 const struct ide_devset *setting, int arg);
1135 void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8);
1136 int ide_complete_rq(ide_drive_t *, blk_status_t, unsigned int);
1138 void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd);
1139 void ide_tf_dump(const char *, struct ide_cmd *);
1141 void ide_exec_command(ide_hwif_t *, u8);
1142 u8 ide_read_status(ide_hwif_t *);
1143 u8 ide_read_altstatus(ide_hwif_t *);
1144 void ide_write_devctl(ide_hwif_t *, u8);
1146 void ide_dev_select(ide_drive_t *);
1147 void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8);
1148 void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8);
1150 void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
1151 void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
1153 void SELECT_MASK(ide_drive_t *, int);
1155 u8 ide_read_error(ide_drive_t *);
1156 void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
1158 int ide_check_ireason(ide_drive_t *, struct request *, int, int, int);
1160 int ide_check_atapi_device(ide_drive_t *, const char *);
1162 void ide_init_pc(struct ide_atapi_pc *);
1164 /* Disk head parking */
1165 extern wait_queue_head_t ide_park_wq;
1166 ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
1168 ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
1169 const char *buf, size_t len);
1172 * Special requests for ide-tape block device strategy routine.
1174 * In order to service a character device command, we add special requests to
1175 * the tail of our block device request queue and wait for their completion.
1178 REQ_IDETAPE_PC1 = BIT(0), /* packet command (first stage) */
1179 REQ_IDETAPE_PC2 = BIT(1), /* packet command (second stage) */
1180 REQ_IDETAPE_READ = BIT(2),
1181 REQ_IDETAPE_WRITE = BIT(3),
1184 int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
1185 void *, unsigned int);
1187 int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
1188 int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
1189 int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
1190 void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
1191 void ide_retry_pc(ide_drive_t *drive);
1193 void ide_prep_sense(ide_drive_t *drive, struct request *rq);
1194 int ide_queue_sense_rq(ide_drive_t *drive, void *special);
1196 int ide_cd_expiry(ide_drive_t *);
1198 int ide_cd_get_xferlen(struct request *);
1200 ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_cmd *);
1202 ide_startstop_t do_rw_taskfile(ide_drive_t *, struct ide_cmd *);
1204 void ide_pio_bytes(ide_drive_t *, struct ide_cmd *, unsigned int, unsigned int);
1206 void ide_finish_cmd(ide_drive_t *, struct ide_cmd *, u8);
1208 int ide_raw_taskfile(ide_drive_t *, struct ide_cmd *, u8 *, u16);
1209 int ide_no_data_taskfile(ide_drive_t *, struct ide_cmd *);
1211 int ide_taskfile_ioctl(ide_drive_t *, unsigned long);
1213 int ide_dev_read_id(ide_drive_t *, u8, u16 *, int);
1215 extern int ide_driveid_update(ide_drive_t *);
1216 extern int ide_config_drive_speed(ide_drive_t *, u8);
1217 extern u8 eighty_ninty_three (ide_drive_t *);
1218 extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
1220 extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
1222 extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
1224 extern void ide_timer_expiry(struct timer_list *t);
1225 extern irqreturn_t ide_intr(int irq, void *dev_id);
1226 extern blk_status_t ide_queue_rq(struct blk_mq_hw_ctx *, const struct blk_mq_queue_data *);
1227 extern blk_status_t ide_issue_rq(ide_drive_t *, struct request *, bool);
1228 extern void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq);
1230 void ide_init_disk(struct gendisk *, ide_drive_t *);
1232 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1233 extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
1234 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1236 #define ide_pci_register_driver(d) pci_register_driver(d)
1239 static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
1241 if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)
1246 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *,
1247 struct ide_hw *, struct ide_hw **);
1248 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
1250 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1251 int ide_pci_set_master(struct pci_dev *, const char *);
1252 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
1253 int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
1254 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
1256 static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
1257 const struct ide_port_info *d)
1263 struct ide_pci_enablebit {
1264 u8 reg; /* byte pci reg holding the enable-bit */
1265 u8 mask; /* mask to isolate the enable-bit */
1266 u8 val; /* value of masked reg when "enabled" */
1270 /* Uses ISA control ports not PCI ones. */
1271 IDE_HFLAG_ISA_PORTS = BIT(0),
1272 /* single port device */
1273 IDE_HFLAG_SINGLE = BIT(1),
1274 /* don't use legacy PIO blacklist */
1275 IDE_HFLAG_PIO_NO_BLACKLIST = BIT(2),
1276 /* set for the second port of QD65xx */
1277 IDE_HFLAG_QD_2ND_PORT = BIT(3),
1278 /* use PIO8/9 for prefetch off/on */
1279 IDE_HFLAG_ABUSE_PREFETCH = BIT(4),
1280 /* use PIO6/7 for fast-devsel off/on */
1281 IDE_HFLAG_ABUSE_FAST_DEVSEL = BIT(5),
1282 /* use 100-102 and 200-202 PIO values to set DMA modes */
1283 IDE_HFLAG_ABUSE_DMA_MODES = BIT(6),
1285 * keep DMA setting when programming PIO mode, may be used only
1286 * for hosts which have separate PIO and DMA timings (ie. PMAC)
1288 IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = BIT(7),
1289 /* program host for the transfer mode after programming device */
1290 IDE_HFLAG_POST_SET_MODE = BIT(8),
1291 /* don't program host/device for the transfer mode ("smart" hosts) */
1292 IDE_HFLAG_NO_SET_MODE = BIT(9),
1293 /* trust BIOS for programming chipset/device for DMA */
1294 IDE_HFLAG_TRUST_BIOS_FOR_DMA = BIT(10),
1295 /* host is CS5510/CS5520 */
1296 IDE_HFLAG_CS5520 = BIT(11),
1297 /* ATAPI DMA is unsupported */
1298 IDE_HFLAG_NO_ATAPI_DMA = BIT(12),
1299 /* set if host is a "non-bootable" controller */
1300 IDE_HFLAG_NON_BOOTABLE = BIT(13),
1301 /* host doesn't support DMA */
1302 IDE_HFLAG_NO_DMA = BIT(14),
1303 /* check if host is PCI IDE device before allowing DMA */
1304 IDE_HFLAG_NO_AUTODMA = BIT(15),
1305 /* host uses MMIO */
1306 IDE_HFLAG_MMIO = BIT(16),
1308 IDE_HFLAG_NO_LBA48 = BIT(17),
1310 IDE_HFLAG_NO_LBA48_DMA = BIT(18),
1311 /* data FIFO is cleared by an error */
1312 IDE_HFLAG_ERROR_STOPS_FIFO = BIT(19),
1313 /* serialize ports */
1314 IDE_HFLAG_SERIALIZE = BIT(20),
1315 /* host is DTC2278 */
1316 IDE_HFLAG_DTC2278 = BIT(21),
1317 /* 4 devices on a single set of I/O ports */
1318 IDE_HFLAG_4DRIVES = BIT(22),
1319 /* host is TRM290 */
1320 IDE_HFLAG_TRM290 = BIT(23),
1321 /* use 32-bit I/O ops */
1322 IDE_HFLAG_IO_32BIT = BIT(24),
1324 IDE_HFLAG_UNMASK_IRQS = BIT(25),
1325 IDE_HFLAG_BROKEN_ALTSTATUS = BIT(26),
1326 /* serialize ports if DMA is possible (for sl82c105) */
1327 IDE_HFLAG_SERIALIZE_DMA = BIT(27),
1328 /* force host out of "simplex" mode */
1329 IDE_HFLAG_CLEAR_SIMPLEX = BIT(28),
1330 /* DSC overlap is unsupported */
1331 IDE_HFLAG_NO_DSC = BIT(29),
1332 /* never use 32-bit I/O ops */
1333 IDE_HFLAG_NO_IO_32BIT = BIT(30),
1334 /* never unmask IRQs */
1335 IDE_HFLAG_NO_UNMASK_IRQS = BIT(31),
1338 #ifdef CONFIG_BLK_DEV_OFFBOARD
1339 # define IDE_HFLAG_OFF_BOARD 0
1341 # define IDE_HFLAG_OFF_BOARD IDE_HFLAG_NON_BOOTABLE
1344 struct ide_port_info {
1347 int (*init_chipset)(struct pci_dev *);
1349 void (*get_lock)(irq_handler_t, void *);
1350 void (*release_lock)(void);
1352 void (*init_iops)(ide_hwif_t *);
1353 void (*init_hwif)(ide_hwif_t *);
1354 int (*init_dma)(ide_hwif_t *,
1355 const struct ide_port_info *);
1357 const struct ide_tp_ops *tp_ops;
1358 const struct ide_port_ops *port_ops;
1359 const struct ide_dma_ops *dma_ops;
1361 struct ide_pci_enablebit enablebits[2];
1363 hwif_chipset_t chipset;
1365 u16 max_sectors; /* if < than the default one */
1378 * State information carried for REQ_TYPE_ATA_PM_SUSPEND and REQ_TYPE_ATA_PM_RESUME
1381 struct ide_pm_state {
1382 /* PM state machine step value, currently driver specific */
1384 /* requested PM state value (S1, S2, S3, S4, ...) */
1386 void* data; /* for driver use */
1390 int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
1391 int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
1392 const struct ide_port_info *, void *);
1393 void ide_pci_remove(struct pci_dev *);
1396 int ide_pci_suspend(struct pci_dev *, pm_message_t);
1397 int ide_pci_resume(struct pci_dev *);
1399 #define ide_pci_suspend NULL
1400 #define ide_pci_resume NULL
1403 void ide_map_sg(ide_drive_t *, struct ide_cmd *);
1404 void ide_init_sg_cmd(struct ide_cmd *, unsigned int);
1406 #define BAD_DMA_DRIVE 0
1407 #define GOOD_DMA_DRIVE 1
1409 struct drive_list_entry {
1410 const char *id_model;
1411 const char *id_firmware;
1414 int ide_in_drive_list(u16 *, const struct drive_list_entry *);
1416 #ifdef CONFIG_BLK_DEV_IDEDMA
1417 int ide_dma_good_drive(ide_drive_t *);
1418 int __ide_dma_bad_drive(ide_drive_t *);
1420 u8 ide_find_dma_mode(ide_drive_t *, u8);
1422 static inline u8 ide_max_dma_mode(ide_drive_t *drive)
1424 return ide_find_dma_mode(drive, XFER_UDMA_6);
1427 void ide_dma_off_quietly(ide_drive_t *);
1428 void ide_dma_off(ide_drive_t *);
1429 void ide_dma_on(ide_drive_t *);
1430 int ide_set_dma(ide_drive_t *);
1431 void ide_check_dma_crc(ide_drive_t *);
1432 ide_startstop_t ide_dma_intr(ide_drive_t *);
1434 int ide_allocate_dma_engine(ide_hwif_t *);
1435 void ide_release_dma_engine(ide_hwif_t *);
1437 int ide_dma_prepare(ide_drive_t *, struct ide_cmd *);
1438 void ide_dma_unmap_sg(ide_drive_t *, struct ide_cmd *);
1440 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
1441 int config_drive_for_dma(ide_drive_t *);
1442 int ide_build_dmatable(ide_drive_t *, struct ide_cmd *);
1443 void ide_dma_host_set(ide_drive_t *, int);
1444 int ide_dma_setup(ide_drive_t *, struct ide_cmd *);
1445 extern void ide_dma_start(ide_drive_t *);
1446 int ide_dma_end(ide_drive_t *);
1447 int ide_dma_test_irq(ide_drive_t *);
1448 int ide_dma_sff_timer_expiry(ide_drive_t *);
1449 u8 ide_dma_sff_read_status(ide_hwif_t *);
1450 extern const struct ide_dma_ops sff_dma_ops;
1452 static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
1453 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
1455 void ide_dma_lost_irq(ide_drive_t *);
1456 ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
1459 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
1460 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
1461 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
1462 static inline void ide_dma_off(ide_drive_t *drive) { ; }
1463 static inline void ide_dma_on(ide_drive_t *drive) { ; }
1464 static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
1465 static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
1466 static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
1467 static inline ide_startstop_t ide_dma_intr(ide_drive_t *drive) { return ide_stopped; }
1468 static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; }
1469 static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
1470 static inline int ide_dma_prepare(ide_drive_t *drive,
1471 struct ide_cmd *cmd) { return 1; }
1472 static inline void ide_dma_unmap_sg(ide_drive_t *drive,
1473 struct ide_cmd *cmd) { ; }
1474 #endif /* CONFIG_BLK_DEV_IDEDMA */
1476 #ifdef CONFIG_BLK_DEV_IDEACPI
1477 int ide_acpi_init(void);
1478 bool ide_port_acpi(ide_hwif_t *hwif);
1479 extern int ide_acpi_exec_tfs(ide_drive_t *drive);
1480 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
1481 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
1482 void ide_acpi_init_port(ide_hwif_t *);
1483 void ide_acpi_port_init_devices(ide_hwif_t *);
1484 extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
1486 static inline int ide_acpi_init(void) { return 0; }
1487 static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; }
1488 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
1489 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
1490 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
1491 static inline void ide_acpi_init_port(ide_hwif_t *hwif) { ; }
1492 static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
1493 static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
1496 void ide_check_nien_quirk_list(ide_drive_t *);
1497 void ide_undecoded_slave(ide_drive_t *);
1499 void ide_port_apply_params(ide_hwif_t *);
1500 int ide_sysfs_register_port(ide_hwif_t *);
1502 struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **,
1504 void ide_host_free(struct ide_host *);
1505 int ide_host_register(struct ide_host *, const struct ide_port_info *,
1507 int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int,
1508 struct ide_host **);
1509 void ide_host_remove(struct ide_host *);
1510 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
1511 void ide_port_unregister_devices(ide_hwif_t *);
1512 void ide_port_scan(ide_hwif_t *);
1514 static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
1516 return hwif->hwif_data;
1519 static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
1521 hwif->hwif_data = data;
1524 u64 ide_get_lba_addr(struct ide_cmd *, int);
1525 u8 ide_dump_status(ide_drive_t *, const char *, u8);
1530 u16 act8b; /* t2 for 8-bit io */
1531 u16 rec8b; /* t2i for 8-bit io */
1532 u16 cyc8b; /* t0 for 8-bit io */
1533 u16 active; /* t2 or tD */
1534 u16 recover; /* t2i or tK */
1536 u16 udma; /* t2CYCTYP/2 */
1540 IDE_TIMING_SETUP = BIT(0),
1541 IDE_TIMING_ACT8B = BIT(1),
1542 IDE_TIMING_REC8B = BIT(2),
1543 IDE_TIMING_CYC8B = BIT(3),
1544 IDE_TIMING_8BIT = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
1546 IDE_TIMING_ACTIVE = BIT(4),
1547 IDE_TIMING_RECOVER = BIT(5),
1548 IDE_TIMING_CYCLE = BIT(6),
1549 IDE_TIMING_UDMA = BIT(7),
1550 IDE_TIMING_ALL = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
1551 IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
1552 IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
1555 struct ide_timing *ide_timing_find_mode(u8);
1556 u16 ide_pio_cycle_time(ide_drive_t *, u8);
1557 void ide_timing_merge(struct ide_timing *, struct ide_timing *,
1558 struct ide_timing *, unsigned int);
1559 int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
1561 #ifdef CONFIG_IDE_XFER_MODE
1562 int ide_scan_pio_blacklist(char *);
1563 const char *ide_xfer_verbose(u8);
1564 int ide_pio_need_iordy(ide_drive_t *, const u8);
1565 int ide_set_pio_mode(ide_drive_t *, u8);
1566 int ide_set_dma_mode(ide_drive_t *, u8);
1567 void ide_set_pio(ide_drive_t *, u8);
1568 int ide_set_xfer_rate(ide_drive_t *, u8);
1570 static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; }
1571 static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; }
1574 static inline void ide_set_max_pio(ide_drive_t *drive)
1576 ide_set_pio(drive, 255);
1579 char *ide_media_string(ide_drive_t *);
1581 extern const struct attribute_group *ide_dev_groups[];
1582 extern struct bus_type ide_bus_type;
1583 extern struct class *ide_port_class;
1585 static inline void ide_dump_identify(u8 *id)
1587 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
1590 static inline int hwif_to_node(ide_hwif_t *hwif)
1592 return hwif->dev ? dev_to_node(hwif->dev) : -1;
1595 static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
1597 ide_drive_t *peer = drive->hwif->devices[(drive->dn ^ 1) & 1];
1599 return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
1602 static inline void *ide_get_drivedata(ide_drive_t *drive)
1604 return drive->drive_data;
1607 static inline void ide_set_drivedata(ide_drive_t *drive, void *data)
1609 drive->drive_data = data;
1612 #define ide_port_for_each_dev(i, dev, port) \
1613 for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
1615 #define ide_port_for_each_present_dev(i, dev, port) \
1616 for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \
1617 if ((dev)->dev_flags & IDE_DFLAG_PRESENT)
1619 #define ide_host_for_each_port(i, port, host) \
1620 for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++)