1 /* SPDX-License-Identifier: GPL-2.0 */
5 #include <linux/blkdev.h>
6 #include <linux/sbitmap.h>
7 #include <linux/srcu.h>
10 struct blk_flush_queue;
13 * struct blk_mq_hw_ctx - State for a hardware queue facing the hardware
16 struct blk_mq_hw_ctx {
18 /** @lock: Protects the dispatch list. */
21 * @dispatch: Used for requests that are ready to be
22 * dispatched to the hardware but for some reason (e.g. lack of
23 * resources) could not be sent to the hardware. As soon as the
24 * driver can send new requests, requests at this list will
25 * be sent first for a fairer dispatch.
27 struct list_head dispatch;
29 * @state: BLK_MQ_S_* flags. Defines the state of the hw
30 * queue (active, scheduled to restart, stopped).
33 } ____cacheline_aligned_in_smp;
36 * @run_work: Used for scheduling a hardware queue run at a later time.
38 struct delayed_work run_work;
39 /** @cpumask: Map of available CPUs where this hctx can run. */
40 cpumask_var_t cpumask;
42 * @next_cpu: Used by blk_mq_hctx_next_cpu() for round-robin CPU
43 * selection from @cpumask.
47 * @next_cpu_batch: Counter of how many works left in the batch before
48 * changing to the next CPU.
52 /** @flags: BLK_MQ_F_* flags. Defines the behaviour of the queue. */
56 * @sched_data: Pointer owned by the IO scheduler attached to a request
57 * queue. It's up to the IO scheduler how to use this pointer.
61 * @queue: Pointer to the request queue that owns this hardware context.
63 struct request_queue *queue;
64 /** @fq: Queue of requests that need to perform a flush operation. */
65 struct blk_flush_queue *fq;
68 * @driver_data: Pointer to data owned by the block driver that created
74 * @ctx_map: Bitmap for each software queue. If bit is on, there is a
75 * pending request in that software queue.
77 struct sbitmap ctx_map;
80 * @dispatch_from: Software queue to be used when no scheduler was
83 struct blk_mq_ctx *dispatch_from;
85 * @dispatch_busy: Number used by blk_mq_update_dispatch_busy() to
86 * decide if the hw_queue is busy using Exponential Weighted Moving
89 unsigned int dispatch_busy;
91 /** @type: HCTX_TYPE_* flags. Type of hardware queue. */
93 /** @nr_ctx: Number of software queues. */
94 unsigned short nr_ctx;
95 /** @ctxs: Array of software queues. */
96 struct blk_mq_ctx **ctxs;
98 /** @dispatch_wait_lock: Lock for dispatch_wait queue. */
99 spinlock_t dispatch_wait_lock;
101 * @dispatch_wait: Waitqueue to put requests when there is no tag
102 * available at the moment, to wait for another try in the future.
104 wait_queue_entry_t dispatch_wait;
107 * @wait_index: Index of next available dispatch_wait queue to insert
113 * @tags: Tags owned by the block driver. A tag at this set is only
114 * assigned when a request is dispatched from a hardware queue.
116 struct blk_mq_tags *tags;
118 * @sched_tags: Tags owned by I/O scheduler. If there is an I/O
119 * scheduler associated with a request queue, a tag is assigned when
120 * that request is allocated. Else, this member is not used.
122 struct blk_mq_tags *sched_tags;
124 /** @queued: Number of queued requests. */
125 unsigned long queued;
126 /** @run: Number of dispatched requests. */
128 #define BLK_MQ_MAX_DISPATCH_ORDER 7
129 /** @dispatched: Number of dispatch requests by queue. */
130 unsigned long dispatched[BLK_MQ_MAX_DISPATCH_ORDER];
132 /** @numa_node: NUMA node the storage adapter has been connected to. */
133 unsigned int numa_node;
134 /** @queue_num: Index of this hardware queue. */
135 unsigned int queue_num;
138 * @nr_active: Number of active requests. Only used when a tag set is
139 * shared across request queues.
143 /** @cpuhp_dead: List to store request if some CPU die. */
144 struct hlist_node cpuhp_dead;
145 /** @kobj: Kernel object for sysfs. */
148 /** @poll_considered: Count times blk_poll() was called. */
149 unsigned long poll_considered;
150 /** @poll_invoked: Count how many requests blk_poll() polled. */
151 unsigned long poll_invoked;
152 /** @poll_success: Count how many polled requests were completed. */
153 unsigned long poll_success;
155 #ifdef CONFIG_BLK_DEBUG_FS
157 * @debugfs_dir: debugfs directory for this hardware queue. Named
158 * as cpu<cpu_number>.
160 struct dentry *debugfs_dir;
161 /** @sched_debugfs_dir: debugfs directory for the scheduler. */
162 struct dentry *sched_debugfs_dir;
166 * @hctx_list: if this hctx is not in use, this is an entry in
167 * q->unused_hctx_list.
169 struct list_head hctx_list;
172 * @srcu: Sleepable RCU. Use as lock when type of the hardware queue is
173 * blocking (BLK_MQ_F_BLOCKING). Must be the last member - see also
174 * blk_mq_hw_ctx_size().
176 struct srcu_struct srcu[0];
180 * struct blk_mq_queue_map - Map software queues to hardware queues
181 * @mq_map: CPU ID to hardware queue index map. This is an array
182 * with nr_cpu_ids elements. Each element has a value in the range
183 * [@queue_offset, @queue_offset + @nr_queues).
184 * @nr_queues: Number of hardware queues to map CPU IDs onto.
185 * @queue_offset: First hardware queue to map onto. Used by the PCIe NVMe
186 * driver to map each hardware queue type (enum hctx_type) onto a distinct
187 * set of hardware queues.
189 struct blk_mq_queue_map {
190 unsigned int *mq_map;
191 unsigned int nr_queues;
192 unsigned int queue_offset;
196 * enum hctx_type - Type of hardware queue
197 * @HCTX_TYPE_DEFAULT: All I/O not otherwise accounted for.
198 * @HCTX_TYPE_READ: Just for READ I/O.
199 * @HCTX_TYPE_POLL: Polled I/O of any kind.
200 * @HCTX_MAX_TYPES: Number of types of hctx.
211 * struct blk_mq_tag_set - tag set that can be shared between request queues
212 * @map: One or more ctx -> hctx mappings. One map exists for each
213 * hardware queue type (enum hctx_type) that the driver wishes
214 * to support. There are no restrictions on maps being of the
215 * same size, and it's perfectly legal to share maps between
217 * @nr_maps: Number of elements in the @map array. A number in the range
218 * [1, HCTX_MAX_TYPES].
219 * @ops: Pointers to functions that implement block driver behavior.
220 * @nr_hw_queues: Number of hardware queues supported by the block driver that
221 * owns this data structure.
222 * @queue_depth: Number of tags per hardware queue, reserved tags included.
223 * @reserved_tags: Number of tags to set aside for BLK_MQ_REQ_RESERVED tag
225 * @cmd_size: Number of additional bytes to allocate per request. The block
226 * driver owns these additional bytes.
227 * @numa_node: NUMA node the storage adapter has been connected to.
228 * @timeout: Request processing timeout in jiffies.
229 * @flags: Zero or more BLK_MQ_F_* flags.
230 * @driver_data: Pointer to data owned by the block driver that created this
232 * @tags: Tag sets. One tag set per hardware queue. Has @nr_hw_queues
234 * @tag_list_lock: Serializes tag_list accesses.
235 * @tag_list: List of the request queues that use this tag set. See also
236 * request_queue.tag_set_list.
238 struct blk_mq_tag_set {
239 struct blk_mq_queue_map map[HCTX_MAX_TYPES];
240 unsigned int nr_maps;
241 const struct blk_mq_ops *ops;
242 unsigned int nr_hw_queues;
243 unsigned int queue_depth;
244 unsigned int reserved_tags;
245 unsigned int cmd_size;
247 unsigned int timeout;
251 struct blk_mq_tags **tags;
253 struct mutex tag_list_lock;
254 struct list_head tag_list;
258 * struct blk_mq_queue_data - Data about a request inserted in a queue
260 * @rq: Request pointer.
261 * @last: If it is the last request in the queue.
263 struct blk_mq_queue_data {
268 typedef blk_status_t (queue_rq_fn)(struct blk_mq_hw_ctx *,
269 const struct blk_mq_queue_data *);
270 typedef void (commit_rqs_fn)(struct blk_mq_hw_ctx *);
271 typedef bool (get_budget_fn)(struct blk_mq_hw_ctx *);
272 typedef void (put_budget_fn)(struct blk_mq_hw_ctx *);
273 typedef enum blk_eh_timer_return (timeout_fn)(struct request *, bool);
274 typedef int (init_hctx_fn)(struct blk_mq_hw_ctx *, void *, unsigned int);
275 typedef void (exit_hctx_fn)(struct blk_mq_hw_ctx *, unsigned int);
276 typedef int (init_request_fn)(struct blk_mq_tag_set *set, struct request *,
277 unsigned int, unsigned int);
278 typedef void (exit_request_fn)(struct blk_mq_tag_set *set, struct request *,
281 typedef bool (busy_iter_fn)(struct blk_mq_hw_ctx *, struct request *, void *,
283 typedef bool (busy_tag_iter_fn)(struct request *, void *, bool);
284 typedef int (poll_fn)(struct blk_mq_hw_ctx *);
285 typedef int (map_queues_fn)(struct blk_mq_tag_set *set);
286 typedef bool (busy_fn)(struct request_queue *);
287 typedef void (complete_fn)(struct request *);
288 typedef void (cleanup_rq_fn)(struct request *);
291 * struct blk_mq_ops - Callback functions that implements block driver
296 * @queue_rq: Queue a new request from block IO.
298 queue_rq_fn *queue_rq;
301 * @commit_rqs: If a driver uses bd->last to judge when to submit
302 * requests to hardware, it must define this function. In case of errors
303 * that make us stop issuing further requests, this hook serves the
304 * purpose of kicking the hardware (which the last request otherwise
307 commit_rqs_fn *commit_rqs;
310 * @get_budget: Reserve budget before queue request, once .queue_rq is
311 * run, it is driver's responsibility to release the
312 * reserved budget. Also we have to handle failure case
313 * of .get_budget for avoiding I/O deadlock.
315 get_budget_fn *get_budget;
317 * @put_budget: Release the reserved budget.
319 put_budget_fn *put_budget;
322 * @timeout: Called on request timeout.
327 * @poll: Called to poll for completion of a specific tag.
332 * @complete: Mark the request as complete.
334 complete_fn *complete;
337 * @init_hctx: Called when the block layer side of a hardware queue has
338 * been set up, allowing the driver to allocate/init matching
341 init_hctx_fn *init_hctx;
343 * @exit_hctx: Ditto for exit/teardown.
345 exit_hctx_fn *exit_hctx;
348 * @init_request: Called for every command allocated by the block layer
349 * to allow the driver to set up driver specific data.
351 * Tag greater than or equal to queue_depth is for setting up
354 init_request_fn *init_request;
356 * @exit_request: Ditto for exit/teardown.
358 exit_request_fn *exit_request;
361 * @initialize_rq_fn: Called from inside blk_get_request().
363 void (*initialize_rq_fn)(struct request *rq);
366 * @cleanup_rq: Called before freeing one request which isn't completed
367 * yet, and usually for freeing the driver private data.
369 cleanup_rq_fn *cleanup_rq;
372 * @busy: If set, returns whether or not this queue currently is busy.
377 * @map_queues: This allows drivers specify their own queue mapping by
378 * overriding the setup-time function that builds the mq_map.
380 map_queues_fn *map_queues;
382 #ifdef CONFIG_BLK_DEBUG_FS
384 * @show_rq: Used by the debugfs implementation to show driver-specific
385 * information about a request.
387 void (*show_rq)(struct seq_file *m, struct request *rq);
392 BLK_MQ_F_SHOULD_MERGE = 1 << 0,
393 BLK_MQ_F_TAG_SHARED = 1 << 1,
394 BLK_MQ_F_BLOCKING = 1 << 5,
395 BLK_MQ_F_NO_SCHED = 1 << 6,
396 BLK_MQ_F_ALLOC_POLICY_START_BIT = 8,
397 BLK_MQ_F_ALLOC_POLICY_BITS = 1,
399 BLK_MQ_S_STOPPED = 0,
400 BLK_MQ_S_TAG_ACTIVE = 1,
401 BLK_MQ_S_SCHED_RESTART = 2,
403 BLK_MQ_MAX_DEPTH = 10240,
405 BLK_MQ_CPU_WORK_BATCH = 8,
407 #define BLK_MQ_FLAG_TO_ALLOC_POLICY(flags) \
408 ((flags >> BLK_MQ_F_ALLOC_POLICY_START_BIT) & \
409 ((1 << BLK_MQ_F_ALLOC_POLICY_BITS) - 1))
410 #define BLK_ALLOC_POLICY_TO_MQ_FLAG(policy) \
411 ((policy & ((1 << BLK_MQ_F_ALLOC_POLICY_BITS) - 1)) \
412 << BLK_MQ_F_ALLOC_POLICY_START_BIT)
414 struct request_queue *blk_mq_init_queue(struct blk_mq_tag_set *);
415 struct request_queue *blk_mq_init_queue_data(struct blk_mq_tag_set *set,
417 struct request_queue *blk_mq_init_allocated_queue(struct blk_mq_tag_set *set,
418 struct request_queue *q,
420 struct request_queue *blk_mq_init_sq_queue(struct blk_mq_tag_set *set,
421 const struct blk_mq_ops *ops,
422 unsigned int queue_depth,
423 unsigned int set_flags);
424 void blk_mq_unregister_dev(struct device *, struct request_queue *);
426 int blk_mq_alloc_tag_set(struct blk_mq_tag_set *set);
427 void blk_mq_free_tag_set(struct blk_mq_tag_set *set);
429 void blk_mq_flush_plug_list(struct blk_plug *plug, bool from_schedule);
431 void blk_mq_free_request(struct request *rq);
433 bool blk_mq_queue_inflight(struct request_queue *q);
436 /* return when out of requests */
437 BLK_MQ_REQ_NOWAIT = (__force blk_mq_req_flags_t)(1 << 0),
438 /* allocate from reserved pool */
439 BLK_MQ_REQ_RESERVED = (__force blk_mq_req_flags_t)(1 << 1),
440 /* allocate internal/sched tag */
441 BLK_MQ_REQ_INTERNAL = (__force blk_mq_req_flags_t)(1 << 2),
442 /* set RQF_PREEMPT */
443 BLK_MQ_REQ_PREEMPT = (__force blk_mq_req_flags_t)(1 << 3),
446 struct request *blk_mq_alloc_request(struct request_queue *q, unsigned int op,
447 blk_mq_req_flags_t flags);
448 struct request *blk_mq_alloc_request_hctx(struct request_queue *q,
449 unsigned int op, blk_mq_req_flags_t flags,
450 unsigned int hctx_idx);
451 struct request *blk_mq_tag_to_rq(struct blk_mq_tags *tags, unsigned int tag);
454 BLK_MQ_UNIQUE_TAG_BITS = 16,
455 BLK_MQ_UNIQUE_TAG_MASK = (1 << BLK_MQ_UNIQUE_TAG_BITS) - 1,
458 u32 blk_mq_unique_tag(struct request *rq);
460 static inline u16 blk_mq_unique_tag_to_hwq(u32 unique_tag)
462 return unique_tag >> BLK_MQ_UNIQUE_TAG_BITS;
465 static inline u16 blk_mq_unique_tag_to_tag(u32 unique_tag)
467 return unique_tag & BLK_MQ_UNIQUE_TAG_MASK;
471 * blk_mq_rq_state() - read the current MQ_RQ_* state of a request
472 * @rq: target request.
474 static inline enum mq_rq_state blk_mq_rq_state(struct request *rq)
476 return READ_ONCE(rq->state);
479 static inline int blk_mq_request_started(struct request *rq)
481 return blk_mq_rq_state(rq) != MQ_RQ_IDLE;
484 static inline int blk_mq_request_completed(struct request *rq)
486 return blk_mq_rq_state(rq) == MQ_RQ_COMPLETE;
489 void blk_mq_start_request(struct request *rq);
490 void blk_mq_end_request(struct request *rq, blk_status_t error);
491 void __blk_mq_end_request(struct request *rq, blk_status_t error);
493 void blk_mq_requeue_request(struct request *rq, bool kick_requeue_list);
494 void blk_mq_kick_requeue_list(struct request_queue *q);
495 void blk_mq_delay_kick_requeue_list(struct request_queue *q, unsigned long msecs);
496 bool blk_mq_complete_request(struct request *rq);
497 bool blk_mq_bio_list_merge(struct request_queue *q, struct list_head *list,
498 struct bio *bio, unsigned int nr_segs);
499 bool blk_mq_queue_stopped(struct request_queue *q);
500 void blk_mq_stop_hw_queue(struct blk_mq_hw_ctx *hctx);
501 void blk_mq_start_hw_queue(struct blk_mq_hw_ctx *hctx);
502 void blk_mq_stop_hw_queues(struct request_queue *q);
503 void blk_mq_start_hw_queues(struct request_queue *q);
504 void blk_mq_start_stopped_hw_queue(struct blk_mq_hw_ctx *hctx, bool async);
505 void blk_mq_start_stopped_hw_queues(struct request_queue *q, bool async);
506 void blk_mq_quiesce_queue(struct request_queue *q);
507 void blk_mq_unquiesce_queue(struct request_queue *q);
508 void blk_mq_delay_run_hw_queue(struct blk_mq_hw_ctx *hctx, unsigned long msecs);
509 void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async);
510 void blk_mq_run_hw_queues(struct request_queue *q, bool async);
511 void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset,
512 busy_tag_iter_fn *fn, void *priv);
513 void blk_mq_tagset_wait_completed_request(struct blk_mq_tag_set *tagset);
514 void blk_mq_freeze_queue(struct request_queue *q);
515 void blk_mq_unfreeze_queue(struct request_queue *q);
516 void blk_freeze_queue_start(struct request_queue *q);
517 void blk_mq_freeze_queue_wait(struct request_queue *q);
518 int blk_mq_freeze_queue_wait_timeout(struct request_queue *q,
519 unsigned long timeout);
521 int blk_mq_map_queues(struct blk_mq_queue_map *qmap);
522 void blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues);
524 void blk_mq_quiesce_queue_nowait(struct request_queue *q);
526 unsigned int blk_mq_rq_cpu(struct request *rq);
529 * blk_mq_rq_from_pdu - cast a PDU to a request
530 * @pdu: the PDU (Protocol Data Unit) to be casted
534 * Driver command data is immediately after the request. So subtract request
535 * size to get back to the original request.
537 static inline struct request *blk_mq_rq_from_pdu(void *pdu)
539 return pdu - sizeof(struct request);
543 * blk_mq_rq_to_pdu - cast a request to a PDU
544 * @rq: the request to be casted
546 * Return: pointer to the PDU
548 * Driver command data is immediately after the request. So add request to get
551 static inline void *blk_mq_rq_to_pdu(struct request *rq)
556 #define queue_for_each_hw_ctx(q, hctx, i) \
557 for ((i) = 0; (i) < (q)->nr_hw_queues && \
558 ({ hctx = (q)->queue_hw_ctx[i]; 1; }); (i)++)
560 #define hctx_for_each_ctx(hctx, ctx, i) \
561 for ((i) = 0; (i) < (hctx)->nr_ctx && \
562 ({ ctx = (hctx)->ctxs[(i)]; 1; }); (i)++)
564 static inline blk_qc_t request_to_qc_t(struct blk_mq_hw_ctx *hctx,
568 return rq->tag | (hctx->queue_num << BLK_QC_T_SHIFT);
570 return rq->internal_tag | (hctx->queue_num << BLK_QC_T_SHIFT) |
574 static inline void blk_mq_cleanup_rq(struct request *rq)
576 if (rq->q->mq_ops->cleanup_rq)
577 rq->q->mq_ops->cleanup_rq(rq);