15 #include "lib/axmap.h"
19 #ifdef CONFIG_LINUX_FALLOCATE
20 #include <linux/falloc.h>
23 static FLIST_HEAD(filename_list);
26 * List entry for filename_list
29 struct flist_head list;
33 static inline void clear_error(struct thread_data *td)
39 static int native_fallocate(struct thread_data *td, struct fio_file *f)
43 success = fio_fallocate(f, 0, f->real_file_size);
44 dprint(FD_FILE, "native fallocate of file %s size %llu was "
45 "%ssuccessful\n", f->file_name,
46 (unsigned long long) f->real_file_size,
53 dprint(FD_FILE, "native fallocate is not implemented\n");
58 static void fallocate_file(struct thread_data *td, struct fio_file *f)
60 if (td->o.fill_device)
63 switch (td->o.fallocate_mode) {
64 case FIO_FALLOCATE_NATIVE:
65 native_fallocate(td, f);
67 case FIO_FALLOCATE_NONE:
69 #ifdef CONFIG_POSIX_FALLOCATE
70 case FIO_FALLOCATE_POSIX: {
73 dprint(FD_FILE, "posix_fallocate file %s size %llu\n",
75 (unsigned long long) f->real_file_size);
77 r = posix_fallocate(f->fd, 0, f->real_file_size);
79 log_err("fio: posix_fallocate fails: %s\n", strerror(r));
82 #endif /* CONFIG_POSIX_FALLOCATE */
83 #ifdef CONFIG_LINUX_FALLOCATE
84 case FIO_FALLOCATE_KEEP_SIZE: {
87 dprint(FD_FILE, "fallocate(FALLOC_FL_KEEP_SIZE) "
88 "file %s size %llu\n", f->file_name,
89 (unsigned long long) f->real_file_size);
91 r = fallocate(f->fd, FALLOC_FL_KEEP_SIZE, 0, f->real_file_size);
93 td_verror(td, errno, "fallocate");
97 #endif /* CONFIG_LINUX_FALLOCATE */
99 log_err("fio: unknown fallocate mode: %d\n", td->o.fallocate_mode);
105 * Leaves f->fd open on success, caller must close
107 static int extend_file(struct thread_data *td, struct fio_file *f)
109 int new_layout = 0, unlink_file = 0, flags;
110 unsigned long long left;
111 unsigned long long bs;
115 log_err("fio: refusing extend of file due to read-only\n");
120 * check if we need to lay the file out complete again. fio
121 * does that for operations involving reads, or for writes
122 * where overwrite is set
125 (td_write(td) && td->o.overwrite && !td->o.file_append) ||
126 (td_write(td) && td_ioengine_flagged(td, FIO_NOEXTEND)))
128 if (td_write(td) && !td->o.overwrite && !td->o.file_append)
131 if (unlink_file || new_layout) {
134 dprint(FD_FILE, "layout unlink %s\n", f->file_name);
136 ret = td_io_unlink_file(td, f);
137 if (ret != 0 && ret != ENOENT) {
138 td_verror(td, errno, "unlink");
144 if (td->o.allow_create)
153 dprint(FD_FILE, "open file %s, flags %x\n", f->file_name, flags);
154 f->fd = open(f->file_name, flags, 0644);
158 if (err == ENOENT && !td->o.allow_create)
159 log_err("fio: file creation disallowed by "
160 "allow_file_create=0\n");
162 td_verror(td, err, "open");
166 fallocate_file(td, f);
169 * If our jobs don't require regular files initially, we're done.
175 * The size will be -1ULL when fill_device is used, so don't truncate
176 * or fallocate this file, just write it
178 if (!td->o.fill_device) {
179 dprint(FD_FILE, "truncate file %s, size %llu\n", f->file_name,
180 (unsigned long long) f->real_file_size);
181 if (ftruncate(f->fd, f->real_file_size) == -1) {
182 if (errno != EFBIG) {
183 td_verror(td, errno, "ftruncate");
189 left = f->real_file_size;
190 bs = td->o.max_bs[DDIR_WRITE];
196 td_verror(td, errno, "malloc");
200 while (left && !td->terminate) {
206 fill_io_buffer(td, b, bs, bs);
208 r = write(f->fd, b, bs);
218 if (td->o.fill_device)
220 log_info("fio: ENOSPC on laying out "
224 td_verror(td, errno, "write");
226 td_verror(td, EIO, "write");
233 dprint(FD_FILE, "terminate unlink %s\n", f->file_name);
234 td_io_unlink_file(td, f);
235 } else if (td->o.create_fsync) {
236 if (fsync(f->fd) < 0) {
237 td_verror(td, errno, "fsync");
241 if (td->o.fill_device && !td_write(td)) {
242 fio_file_clear_size_known(f);
243 if (td_io_get_file_size(td, f))
245 if (f->io_size > f->real_file_size)
246 f->io_size = f->real_file_size;
260 static bool pre_read_file(struct thread_data *td, struct fio_file *f)
262 int r, did_open = 0, old_runstate;
263 unsigned long long left;
264 unsigned long long bs;
268 if (td_ioengine_flagged(td, FIO_PIPEIO) ||
269 td_ioengine_flagged(td, FIO_NOIO))
272 if (f->filetype == FIO_TYPE_CHAR)
275 if (!fio_file_open(f)) {
276 if (td->io_ops->open_file(td, f)) {
277 log_err("fio: cannot pre-read, failed to open file\n");
283 old_runstate = td_bump_runstate(td, TD_PRE_READING);
286 bs = td->o.max_bs[DDIR_READ];
292 td_verror(td, errno, "malloc");
298 if (lseek(f->fd, f->file_offset, SEEK_SET) < 0) {
299 td_verror(td, errno, "lseek");
300 log_err("fio: failed to lseek pre-read file\n");
305 while (left && !td->terminate) {
309 r = read(f->fd, b, bs);
315 td_verror(td, EIO, "pre_read");
321 td_restore_runstate(td, old_runstate);
324 td->io_ops->close_file(td, f);
330 unsigned long long get_rand_file_size(struct thread_data *td)
332 unsigned long long ret, sized;
336 frand_max = rand_max(&td->file_size_state);
337 r = __rand(&td->file_size_state);
338 sized = td->o.file_size_high - td->o.file_size_low;
339 ret = (unsigned long long) ((double) sized * (r / (frand_max + 1.0)));
340 ret += td->o.file_size_low;
341 ret -= (ret % td->o.rw_min_bs);
345 static int file_size(struct thread_data *td, struct fio_file *f)
349 if (stat(f->file_name, &st) == -1) {
350 td_verror(td, errno, "fstat");
354 f->real_file_size = st.st_size;
358 static int bdev_size(struct thread_data *td, struct fio_file *f)
360 unsigned long long bytes = 0;
363 if (td->io_ops->open_file(td, f)) {
364 log_err("fio: failed opening blockdev %s for size check\n",
369 r = blockdev_size(f, &bytes);
371 td_verror(td, r, "blockdev_size");
376 log_err("%s: zero sized block device?\n", f->file_name);
380 f->real_file_size = bytes;
381 td->io_ops->close_file(td, f);
384 td->io_ops->close_file(td, f);
388 static int char_size(struct thread_data *td, struct fio_file *f)
390 #ifdef FIO_HAVE_CHARDEV_SIZE
391 unsigned long long bytes = 0;
394 if (td->io_ops->open_file(td, f)) {
395 log_err("fio: failed opening chardev %s for size check\n",
400 r = chardev_size(f, &bytes);
402 td_verror(td, r, "chardev_size");
407 log_err("%s: zero sized char device?\n", f->file_name);
411 f->real_file_size = bytes;
412 td->io_ops->close_file(td, f);
415 td->io_ops->close_file(td, f);
418 f->real_file_size = -1ULL;
423 static int get_file_size(struct thread_data *td, struct fio_file *f)
427 if (fio_file_size_known(f))
430 if (f->filetype == FIO_TYPE_FILE)
431 ret = file_size(td, f);
432 else if (f->filetype == FIO_TYPE_BLOCK)
433 ret = bdev_size(td, f);
434 else if (f->filetype == FIO_TYPE_CHAR)
435 ret = char_size(td, f);
437 f->real_file_size = -1;
438 log_info("%s: failed to get file size of %s\n", td->o.name,
440 return 1; /* avoid offset extends end error message */
444 * Leave ->real_file_size with 0 since it could be expectation
445 * of initial setup for regular files.
451 * ->file_offset normally hasn't been initialized yet, so this
452 * is basically always false unless ->real_file_size is -1, but
453 * if ->real_file_size is -1 this message doesn't make sense.
454 * As a result, this message is basically useless.
456 if (f->file_offset > f->real_file_size) {
457 log_err("%s: offset extends end (%llu > %llu)\n", td->o.name,
458 (unsigned long long) f->file_offset,
459 (unsigned long long) f->real_file_size);
463 fio_file_set_size_known(f);
467 static int __file_invalidate_cache(struct thread_data *td, struct fio_file *f,
468 unsigned long long off,
469 unsigned long long len)
471 int errval = 0, ret = 0;
480 off = f->file_offset;
482 if (len == -1ULL || off == -1ULL)
485 if (td->io_ops->invalidate) {
486 dprint(FD_IO, "invalidate %s cache %s\n", td->io_ops->name,
488 ret = td->io_ops->invalidate(td, f);
491 } else if (td_ioengine_flagged(td, FIO_DISKLESSIO)) {
492 dprint(FD_IO, "invalidate not supported by ioengine %s\n",
494 } else if (f->filetype == FIO_TYPE_FILE) {
495 dprint(FD_IO, "declare unneeded cache %s: %llu/%llu\n",
496 f->file_name, off, len);
497 ret = posix_fadvise(f->fd, off, len, POSIX_FADV_DONTNEED);
500 } else if (f->filetype == FIO_TYPE_BLOCK) {
503 dprint(FD_IO, "drop page cache %s\n", f->file_name);
504 ret = blockdev_invalidate_cache(f);
505 while (ret < 0 && errno == EAGAIN && retry_count++ < 25) {
507 * Linux multipath devices reject ioctl while
508 * the maps are being updated. That window can
509 * last tens of milliseconds; we'll try up to
510 * a quarter of a second.
513 ret = blockdev_invalidate_cache(f);
515 if (ret < 0 && errno == EACCES && geteuid()) {
516 if (!fio_did_warn(FIO_WARN_ROOT_FLUSH)) {
517 log_err("fio: only root may flush block "
518 "devices. Cache flush bypassed!\n");
523 } else if (f->filetype == FIO_TYPE_CHAR ||
524 f->filetype == FIO_TYPE_PIPE) {
525 dprint(FD_IO, "invalidate not supported %s\n", f->file_name);
529 * Cache flushing isn't a fatal condition, and we know it will
530 * happen on some platforms where we don't have the proper
531 * function to flush eg block device caches. So just warn and
532 * continue on our way.
535 log_info("fio: cache invalidation of %s failed: %s\n",
536 f->file_name, strerror(errval));
542 int file_invalidate_cache(struct thread_data *td, struct fio_file *f)
544 if (!fio_file_open(f))
547 return __file_invalidate_cache(td, f, -1ULL, -1ULL);
550 int generic_close_file(struct thread_data fio_unused *td, struct fio_file *f)
554 dprint(FD_FILE, "fd close %s\n", f->file_name);
558 if (close(f->fd) < 0)
563 if (f->shadow_fd != -1) {
572 int file_lookup_open(struct fio_file *f, int flags)
574 struct fio_file *__f;
577 __f = lookup_file_hash(f->file_name);
579 dprint(FD_FILE, "found file in hash %s\n", f->file_name);
583 dprint(FD_FILE, "file not found in hash %s\n", f->file_name);
591 f->fd = open(f->file_name, flags, 0600);
595 static int file_close_shadow_fds(struct thread_data *td)
601 for_each_file(td, f, i) {
602 if (f->shadow_fd == -1)
613 int generic_open_file(struct thread_data *td, struct fio_file *f)
619 dprint(FD_FILE, "fd open %s\n", f->file_name);
621 if (!strcmp(f->file_name, "-")) {
623 log_err("fio: can't read/write to stdin/out\n");
629 * move output logging to stderr, if we are writing to stdout
638 flags |= OS_O_DIRECT;
641 td_verror(td, EINVAL, "OS does not support atomic IO");
644 flags |= OS_O_DIRECT | FIO_O_ATOMIC;
648 if (td->o.create_on_open && td->o.allow_create)
651 if (f->filetype != FIO_TYPE_FILE)
652 flags |= FIO_O_NOATIME;
659 if (f->filetype == FIO_TYPE_FILE && td->o.allow_create)
663 f->fd = dup(STDOUT_FILENO);
665 from_hash = file_lookup_open(f, flags);
666 } else if (td_read(td)) {
667 if (f->filetype == FIO_TYPE_CHAR && !read_only)
673 f->fd = dup(STDIN_FILENO);
675 from_hash = file_lookup_open(f, flags);
676 } else if (td_trim(td)) {
677 assert(!td_rw(td)); /* should have matched above */
680 from_hash = file_lookup_open(f, flags);
684 char buf[FIO_VERROR_SIZE];
687 if (__e == EPERM && (flags & FIO_O_NOATIME)) {
688 flags &= ~FIO_O_NOATIME;
691 if (__e == EMFILE && file_close_shadow_fds(td))
694 snprintf(buf, sizeof(buf), "open(%s)", f->file_name);
696 if (__e == EINVAL && (flags & OS_O_DIRECT)) {
697 log_err("fio: looks like your file system does not " \
698 "support direct=1/buffered=0\n");
701 td_verror(td, __e, buf);
705 if (!from_hash && f->fd != -1) {
706 if (add_file_hash(f)) {
710 * Stash away descriptor for later close. This is to
711 * work-around a "feature" on Linux, where a close of
712 * an fd that has been opened for write will trigger
713 * udev to call blkid to check partitions, fs id, etc.
714 * That pollutes the device cache, which can slow down
715 * unbuffered accesses.
717 if (f->shadow_fd == -1)
718 f->shadow_fd = f->fd;
721 * OK to ignore, we haven't done anything
724 ret = generic_close_file(td, f);
734 * This function i.e. get_file_size() is the default .get_file_size
735 * implementation of majority of I/O engines.
737 int generic_get_file_size(struct thread_data *td, struct fio_file *f)
739 return get_file_size(td, f);
743 * open/close all files, so that ->real_file_size gets set
745 static int get_file_sizes(struct thread_data *td)
751 for_each_file(td, f, i) {
752 dprint(FD_FILE, "get file size for %p/%d/%s\n", f, i,
755 if (td_io_get_file_size(td, f)) {
756 if (td->error != ENOENT) {
757 log_err("%s\n", td->verror);
765 * There are corner cases where we end up with -1 for
766 * ->real_file_size due to unsupported file type, etc.
767 * We then just set to size option value divided by number
768 * of files, similar to the way file ->io_size is set.
769 * stat(2) failure doesn't set ->real_file_size to -1.
771 if (f->real_file_size == -1ULL && td->o.size)
772 f->real_file_size = td->o.size / td->o.nr_files;
779 struct flist_head list;
786 * Get free number of bytes for each file on each unique mount.
788 static unsigned long long get_fs_free_counts(struct thread_data *td)
790 struct flist_head *n, *tmp;
791 unsigned long long ret = 0;
792 struct fio_mount *fm;
797 for_each_file(td, f, i) {
801 if (f->filetype == FIO_TYPE_BLOCK || f->filetype == FIO_TYPE_CHAR) {
802 if (f->real_file_size != -1ULL)
803 ret += f->real_file_size;
805 } else if (f->filetype != FIO_TYPE_FILE)
808 snprintf(buf, ARRAY_SIZE(buf), "%s", f->file_name);
810 if (stat(buf, &sb) < 0) {
814 if (stat(buf, &sb) < 0)
819 flist_for_each(n, &list) {
820 fm = flist_entry(n, struct fio_mount, list);
821 if (fm->key == sb.st_dev)
830 fm = calloc(1, sizeof(*fm));
831 snprintf(fm->__base, ARRAY_SIZE(fm->__base), "%s", buf);
832 fm->base = basename(fm->__base);
834 flist_add(&fm->list, &list);
837 flist_for_each_safe(n, tmp, &list) {
838 unsigned long long sz;
840 fm = flist_entry(n, struct fio_mount, list);
841 flist_del(&fm->list);
843 sz = get_fs_free_size(fm->base);
844 if (sz && sz != -1ULL)
853 uint64_t get_start_offset(struct thread_data *td, struct fio_file *f)
856 struct thread_options *o = &td->o;
857 unsigned long long align_bs;
858 unsigned long long offset;
859 unsigned long long increment;
861 if (o->file_append && f->filetype == FIO_TYPE_FILE)
862 return f->real_file_size;
864 if (o->offset_increment_percent) {
865 assert(!o->offset_increment);
866 increment = o->offset_increment_percent * f->real_file_size / 100;
869 increment = o->offset_increment;
871 if (o->start_offset_percent > 0) {
872 /* calculate the raw offset */
873 offset = (f->real_file_size * o->start_offset_percent / 100) +
874 (td->subjob_number * increment);
878 /* start_offset_percent not set */
879 offset = o->start_offset +
880 td->subjob_number * increment;
885 * if offset_align is provided, use it
887 if (fio_option_is_set(o, start_offset_align)) {
888 align_bs = o->start_offset_align;
890 /* else take the minimum block size */
891 align_bs = td_min_bs(td);
895 * block align the offset at the next available boundary at
896 * ceiling(offset / align_bs) * align_bs
898 offset = (offset / align_bs + (offset % align_bs != 0)) * align_bs;
904 static bool create_work_dirs(struct thread_data *td, const char *fname)
909 if (td->o.directory) {
910 snprintf(path, PATH_MAX, "%s%c%s", td->o.directory,
911 FIO_OS_PATH_SEPARATOR, fname);
912 start = strstr(path, fname);
914 snprintf(path, PATH_MAX, "%s", fname);
919 while ((end = strchr(end, FIO_OS_PATH_SEPARATOR)) != NULL) {
924 #ifdef CONFIG_HAVE_MKDIR_TWO
925 if (mkdir(path, 0600) && errno != EEXIST) {
927 if (mkdir(path) && errno != EEXIST) {
929 log_err("fio: failed to create dir (%s): %d\n",
933 *end = FIO_OS_PATH_SEPARATOR;
936 td->flags |= TD_F_DIRS_CREATED;
941 * Open the files and setup files sizes, creating files if necessary.
943 int setup_files(struct thread_data *td)
945 unsigned long long total_size, extend_size;
946 struct thread_options *o = &td->o;
948 unsigned int i, nr_fs_extra = 0;
949 int err = 0, need_extend;
951 const unsigned long long bs = td_min_bs(td);
954 dprint(FD_FILE, "setup files\n");
956 old_state = td_bump_runstate(td, TD_SETTING_UP);
958 for_each_file(td, f, i) {
959 if (!td_ioengine_flagged(td, FIO_DISKLESSIO) &&
960 strchr(f->file_name, FIO_OS_PATH_SEPARATOR) &&
961 !(td->flags & TD_F_DIRS_CREATED) &&
962 !create_work_dirs(td, f->file_name))
967 * Find out physical size of files or devices for this thread,
968 * before we determine I/O size and range of our targets.
969 * If ioengine defines a setup() method, it's responsible for
970 * opening the files and setting f->real_file_size to indicate
971 * the valid range for that file.
973 if (td->io_ops->setup)
974 err = td->io_ops->setup(td);
976 err = get_file_sizes(td);
981 if (o->read_iolog_file)
985 * check sizes. if the files/devices do not exist and the size
986 * isn't passed to fio, abort.
989 for_each_file(td, f, i) {
991 if (f->real_file_size == -1ULL)
994 total_size += f->real_file_size;
998 td->fill_device_size = get_fs_free_counts(td);
1001 * device/file sizes are zero and no size given, punt
1003 if ((!total_size || total_size == -1ULL) && !o->size &&
1004 !td_ioengine_flagged(td, FIO_NOIO) && !o->fill_device &&
1005 !(o->nr_files && (o->file_size_low || o->file_size_high))) {
1006 log_err("%s: you need to specify size=\n", o->name);
1007 td_verror(td, EINVAL, "total_file_size");
1012 * Calculate per-file size and potential extra size for the
1013 * first files, if needed (i.e. if we don't have a fixed size).
1015 if (!o->file_size_low && o->nr_files) {
1018 fs = o->size / o->nr_files;
1019 all_fs = fs * o->nr_files;
1021 if (all_fs < o->size)
1022 nr_fs_extra = (o->size - all_fs) / bs;
1026 * now file sizes are known, so we can set ->io_size. if size= is
1027 * not given, ->io_size is just equal to ->real_file_size. if size
1028 * is given, ->io_size is size / nr_files.
1030 extend_size = total_size = 0;
1032 for_each_file(td, f, i) {
1033 f->file_offset = get_start_offset(td, f);
1036 * Update ->io_size depending on options specified.
1037 * ->file_size_low being 0 means filesize option isn't set.
1038 * Non zero ->file_size_low equals ->file_size_high means
1039 * filesize option is set in a fixed size format.
1040 * Non zero ->file_size_low not equals ->file_size_high means
1041 * filesize option is set in a range format.
1043 if (!o->file_size_low) {
1045 * no file size or range given, file size is equal to
1046 * total size divided by number of files. If the size
1047 * doesn't divide nicely with the min blocksize,
1048 * make the first files bigger.
1057 * We normally don't come here for regular files, but
1058 * if the result is 0 for a regular file, set it to the
1059 * real file size. This could be size of the existing
1060 * one if it already exists, but otherwise will be set
1061 * to 0. A new file won't be created because
1062 * ->io_size + ->file_offset equals ->real_file_size.
1065 if (f->file_offset > f->real_file_size)
1067 f->io_size = f->real_file_size - f->file_offset;
1069 log_info("fio: file %s may be ignored\n",
1072 } else if (f->real_file_size < o->file_size_low ||
1073 f->real_file_size > o->file_size_high) {
1074 if (f->file_offset > o->file_size_low)
1077 * file size given. if it's fixed, use that. if it's a
1078 * range, generate a random size in-between.
1080 if (o->file_size_low == o->file_size_high)
1081 f->io_size = o->file_size_low - f->file_offset;
1083 f->io_size = get_rand_file_size(td)
1087 f->io_size = f->real_file_size - f->file_offset;
1089 if (f->io_size == -1ULL)
1092 if (o->size_percent && o->size_percent != 100) {
1095 file_size = f->io_size + f->file_offset;
1096 f->io_size = (file_size *
1097 o->size_percent) / 100;
1098 if (f->io_size > (file_size - f->file_offset))
1099 f->io_size = file_size - f->file_offset;
1101 f->io_size -= (f->io_size % td_min_bs(td));
1103 total_size += f->io_size;
1106 if (f->filetype == FIO_TYPE_FILE &&
1107 (f->io_size + f->file_offset) > f->real_file_size) {
1108 if (!td_ioengine_flagged(td, FIO_DISKLESSIO) &&
1109 !o->create_on_open) {
1111 extend_size += (f->io_size + f->file_offset);
1112 fio_file_set_extend(f);
1113 } else if (!td_ioengine_flagged(td, FIO_DISKLESSIO) ||
1114 (td_ioengine_flagged(td, FIO_DISKLESSIO) &&
1115 td_ioengine_flagged(td, FIO_FAKEIO)))
1116 f->real_file_size = f->io_size + f->file_offset;
1120 if (td->o.block_error_hist) {
1123 assert(td->o.nr_files == 1); /* checked in fixup_options */
1125 len = f->io_size / td->o.bs[DDIR_TRIM];
1126 if (len > MAX_NR_BLOCK_INFOS || len <= 0) {
1127 log_err("fio: cannot calculate block histogram with "
1128 "%d trim blocks, maximum %d\n",
1129 len, MAX_NR_BLOCK_INFOS);
1130 td_verror(td, EINVAL, "block_error_hist");
1134 td->ts.nr_block_infos = len;
1135 for (i = 0; i < len; i++)
1136 td->ts.block_infos[i] =
1137 BLOCK_INFO(0, BLOCK_STATE_UNINIT);
1139 td->ts.nr_block_infos = 0;
1141 if (!o->size || (total_size && o->size > total_size))
1142 o->size = total_size;
1144 if (o->size < td_min_bs(td)) {
1145 log_err("fio: blocksize too large for data set\n");
1150 * See if we need to extend some files, typically needed when our
1151 * target regular files don't exist yet, but our jobs require them
1152 * initially due to read I/Os.
1156 if (output_format & FIO_OUTPUT_NORMAL) {
1157 log_info("%s: Laying out IO file%s (%u file%s / %s%lluMiB)\n",
1159 need_extend > 1 ? "s" : "",
1161 need_extend > 1 ? "s" : "",
1162 need_extend > 1 ? "total " : "",
1166 for_each_file(td, f, i) {
1167 unsigned long long old_len = -1ULL, extend_len = -1ULL;
1169 if (!fio_file_extend(f))
1172 assert(f->filetype == FIO_TYPE_FILE);
1173 fio_file_clear_extend(f);
1174 if (!o->fill_device) {
1175 old_len = f->real_file_size;
1176 extend_len = f->io_size + f->file_offset -
1179 f->real_file_size = (f->io_size + f->file_offset);
1180 err = extend_file(td, f);
1184 err = __file_invalidate_cache(td, f, old_len,
1188 * Shut up static checker
1204 * iolog already set the total io size, if we read back
1207 if (!o->read_iolog_file) {
1209 td->total_io_size = o->io_size * o->loops;
1211 td->total_io_size = o->size * o->loops;
1218 td_restore_runstate(td, old_state);
1220 if (td->o.zone_mode == ZONE_MODE_ZBD) {
1228 log_err("%s: you need to specify valid offset=\n", o->name);
1230 td_restore_runstate(td, old_state);
1234 bool pre_read_files(struct thread_data *td)
1239 dprint(FD_FILE, "pre_read files\n");
1241 for_each_file(td, f, i) {
1242 if (!pre_read_file(td, f))
1249 static void __init_rand_distribution(struct thread_data *td, struct fio_file *f)
1251 unsigned int range_size, seed;
1255 range_size = min(td->o.min_bs[DDIR_READ], td->o.min_bs[DDIR_WRITE]);
1256 fsize = min(f->real_file_size, f->io_size);
1258 nranges = (fsize + range_size - 1ULL) / range_size;
1260 seed = jhash(f->file_name, strlen(f->file_name), 0) * td->thread_number;
1261 if (!td->o.rand_repeatable)
1262 seed = td->rand_seeds[4];
1264 if (td->o.random_distribution == FIO_RAND_DIST_ZIPF)
1265 zipf_init(&f->zipf, nranges, td->o.zipf_theta.u.f, seed);
1266 else if (td->o.random_distribution == FIO_RAND_DIST_PARETO)
1267 pareto_init(&f->zipf, nranges, td->o.pareto_h.u.f, seed);
1268 else if (td->o.random_distribution == FIO_RAND_DIST_GAUSS)
1269 gauss_init(&f->gauss, nranges, td->o.gauss_dev.u.f, seed);
1272 static bool init_rand_distribution(struct thread_data *td)
1278 if (td->o.random_distribution == FIO_RAND_DIST_RANDOM)
1281 state = td_bump_runstate(td, TD_SETTING_UP);
1283 for_each_file(td, f, i)
1284 __init_rand_distribution(td, f);
1286 td_restore_runstate(td, state);
1291 * Check if the number of blocks exceeds the randomness capability of
1292 * the selected generator. Tausworthe is 32-bit, the others are fullly
1295 static int check_rand_gen_limits(struct thread_data *td, struct fio_file *f,
1298 if (blocks <= FRAND32_MAX)
1300 if (td->o.random_generator != FIO_RAND_GEN_TAUSWORTHE)
1304 * If the user hasn't specified a random generator, switch
1305 * to tausworthe64 with informational warning. If the user did
1306 * specify one, just warn.
1308 log_info("fio: file %s exceeds 32-bit tausworthe random generator.\n",
1311 if (!fio_option_is_set(&td->o, random_generator)) {
1312 log_info("fio: Switching to tausworthe64. Use the "
1313 "random_generator= option to get rid of this "
1315 td->o.random_generator = FIO_RAND_GEN_TAUSWORTHE64;
1320 * Just make this information to avoid breaking scripts.
1322 log_info("fio: Use the random_generator= option to switch to lfsr or "
1327 bool init_random_map(struct thread_data *td)
1329 unsigned long long blocks;
1333 if (init_rand_distribution(td))
1338 for_each_file(td, f, i) {
1339 uint64_t fsize = min(f->real_file_size, f->io_size);
1341 if (td->o.zone_mode == ZONE_MODE_STRIDED)
1342 fsize = td->o.zone_range;
1344 blocks = fsize / (unsigned long long) td->o.rw_min_bs;
1346 if (check_rand_gen_limits(td, f, blocks))
1349 if (td->o.random_generator == FIO_RAND_GEN_LFSR) {
1352 seed = td->rand_seeds[FIO_RAND_BLOCK_OFF];
1354 if (!lfsr_init(&f->lfsr, blocks, seed, 0)) {
1355 fio_file_set_lfsr(f);
1358 } else if (!td->o.norandommap) {
1359 f->io_axmap = axmap_new(blocks);
1361 fio_file_set_axmap(f);
1364 } else if (td->o.norandommap)
1367 if (!td->o.softrandommap) {
1368 log_err("fio: failed allocating random map. If running"
1369 " a large number of jobs, try the 'norandommap'"
1370 " option or set 'softrandommap'. Or give"
1371 " a larger --alloc-size to fio.\n");
1375 log_info("fio: file %s failed allocating random map. Running "
1376 "job without.\n", f->file_name);
1382 void close_files(struct thread_data *td)
1387 for_each_file(td, f, i) {
1388 if (fio_file_open(f))
1389 td_io_close_file(td, f);
1393 void close_and_free_files(struct thread_data *td)
1397 bool use_free = td_ioengine_flagged(td, FIO_NOFILEHASH);
1399 dprint(FD_FILE, "close files\n");
1401 for_each_file(td, f, i) {
1402 if (td->o.unlink && f->filetype == FIO_TYPE_FILE) {
1403 dprint(FD_FILE, "free unlink %s\n", f->file_name);
1404 td_io_unlink_file(td, f);
1407 if (fio_file_open(f))
1408 td_io_close_file(td, f);
1410 remove_file_hash(f);
1412 if (td->o.unlink && f->filetype == FIO_TYPE_FILE) {
1413 dprint(FD_FILE, "free unlink %s\n", f->file_name);
1414 td_io_unlink_file(td, f);
1417 zbd_free_zone_info(f);
1422 sfree(f->file_name);
1423 f->file_name = NULL;
1424 if (fio_file_axmap(f)) {
1425 axmap_free(f->io_axmap);
1434 td->o.filename = NULL;
1436 free(td->file_locks);
1437 td->files_index = 0;
1439 td->file_locks = NULL;
1440 td->o.file_lock_mode = FILE_LOCK_NONE;
1444 static void get_file_type(struct fio_file *f)
1448 if (!strcmp(f->file_name, "-"))
1449 f->filetype = FIO_TYPE_PIPE;
1451 f->filetype = FIO_TYPE_FILE;
1454 /* \\.\ is the device namespace in Windows, where every file is
1456 if (strncmp(f->file_name, "\\\\.\\", 4) == 0)
1457 f->filetype = FIO_TYPE_BLOCK;
1460 if (!stat(f->file_name, &sb)) {
1461 if (S_ISBLK(sb.st_mode))
1462 f->filetype = FIO_TYPE_BLOCK;
1463 else if (S_ISCHR(sb.st_mode))
1464 f->filetype = FIO_TYPE_CHAR;
1465 else if (S_ISFIFO(sb.st_mode))
1466 f->filetype = FIO_TYPE_PIPE;
1470 static bool __is_already_allocated(const char *fname, bool set)
1472 struct flist_head *entry;
1475 ret = file_bloom_exists(fname, set);
1479 flist_for_each(entry, &filename_list) {
1480 struct file_name *fn;
1482 fn = flist_entry(entry, struct file_name, list);
1484 if (!strcmp(fn->filename, fname))
1491 static bool is_already_allocated(const char *fname)
1495 fio_file_hash_lock();
1496 ret = __is_already_allocated(fname, false);
1497 fio_file_hash_unlock();
1502 static void set_already_allocated(const char *fname)
1504 struct file_name *fn;
1506 fn = malloc(sizeof(struct file_name));
1507 fn->filename = strdup(fname);
1509 fio_file_hash_lock();
1510 if (!__is_already_allocated(fname, true)) {
1511 flist_add_tail(&fn->list, &filename_list);
1514 fio_file_hash_unlock();
1522 static void free_already_allocated(void)
1524 struct flist_head *entry, *tmp;
1525 struct file_name *fn;
1527 if (flist_empty(&filename_list))
1530 fio_file_hash_lock();
1531 flist_for_each_safe(entry, tmp, &filename_list) {
1532 fn = flist_entry(entry, struct file_name, list);
1534 flist_del(&fn->list);
1538 fio_file_hash_unlock();
1541 static struct fio_file *alloc_new_file(struct thread_data *td)
1545 if (td_ioengine_flagged(td, FIO_NOFILEHASH))
1546 f = calloc(1, sizeof(*f));
1548 f = scalloc(1, sizeof(*f));
1556 fio_file_reset(td, f);
1560 bool exists_and_not_regfile(const char *filename)
1564 if (lstat(filename, &sb) == -1)
1567 #ifndef WIN32 /* NOT Windows */
1568 if (S_ISREG(sb.st_mode))
1571 /* \\.\ is the device namespace in Windows, where every file
1572 * is a device node */
1573 if (S_ISREG(sb.st_mode) && strncmp(filename, "\\\\.\\", 4) != 0)
1580 int add_file(struct thread_data *td, const char *fname, int numjob, int inc)
1582 int cur_files = td->files_index;
1583 char file_name[PATH_MAX];
1587 dprint(FD_FILE, "add file %s\n", fname);
1589 if (td->o.directory)
1590 len = set_name_idx(file_name, PATH_MAX, td->o.directory, numjob,
1591 td->o.unique_filename);
1593 sprintf(file_name + len, "%s", fname);
1595 /* clean cloned siblings using existing files */
1596 if (numjob && is_already_allocated(file_name) &&
1597 !exists_and_not_regfile(fname))
1600 f = alloc_new_file(td);
1602 if (td->files_size <= td->files_index) {
1603 unsigned int new_size = td->o.nr_files + 1;
1605 dprint(FD_FILE, "resize file array to %d files\n", new_size);
1607 td->files = realloc(td->files, new_size * sizeof(f));
1608 if (td->files == NULL) {
1609 log_err("fio: realloc OOM\n");
1612 if (td->o.file_lock_mode != FILE_LOCK_NONE) {
1613 td->file_locks = realloc(td->file_locks, new_size);
1614 if (!td->file_locks) {
1615 log_err("fio: realloc OOM\n");
1618 td->file_locks[cur_files] = FILE_LOCK_NONE;
1620 td->files_size = new_size;
1622 td->files[cur_files] = f;
1623 f->fileno = cur_files;
1626 * init function, io engine may not be loaded yet
1628 if (td->io_ops && td_ioengine_flagged(td, FIO_DISKLESSIO))
1629 f->real_file_size = -1ULL;
1631 if (td_ioengine_flagged(td, FIO_NOFILEHASH))
1632 f->file_name = strdup(file_name);
1634 f->file_name = smalloc_strdup(file_name);
1636 /* can't handle smalloc failure from here */
1637 assert(f->file_name);
1641 switch (td->o.file_lock_mode) {
1642 case FILE_LOCK_NONE:
1644 case FILE_LOCK_READWRITE:
1645 f->rwlock = fio_rwlock_init();
1647 case FILE_LOCK_EXCLUSIVE:
1648 f->lock = fio_sem_init(FIO_SEM_UNLOCKED);
1651 log_err("fio: unknown lock mode: %d\n", td->o.file_lock_mode);
1657 if (td->o.numjobs > 1)
1658 set_already_allocated(file_name);
1663 dprint(FD_FILE, "file %p \"%s\" added at %d\n", f, f->file_name,
1669 int add_file_exclusive(struct thread_data *td, const char *fname)
1674 for_each_file(td, f, i) {
1675 if (!strcmp(f->file_name, fname))
1679 return add_file(td, fname, 0, 1);
1682 void get_file(struct fio_file *f)
1684 dprint(FD_FILE, "get file %s, ref=%d\n", f->file_name, f->references);
1685 assert(fio_file_open(f));
1689 int put_file(struct thread_data *td, struct fio_file *f)
1691 int f_ret = 0, ret = 0;
1693 dprint(FD_FILE, "put file %s, ref=%d\n", f->file_name, f->references);
1695 if (!fio_file_open(f)) {
1696 assert(f->fd == -1);
1700 assert(f->references);
1701 if (--f->references)
1704 disk_util_dec(f->du);
1706 if (td->o.file_lock_mode != FILE_LOCK_NONE)
1707 unlock_file_all(td, f);
1709 if (should_fsync(td) && td->o.fsync_on_close) {
1710 f_ret = fsync(f->fd);
1715 if (td->io_ops->close_file)
1716 ret = td->io_ops->close_file(td, f);
1721 td->nr_open_files--;
1722 fio_file_clear_closing(f);
1723 fio_file_clear_open(f);
1724 assert(f->fd == -1);
1728 void lock_file(struct thread_data *td, struct fio_file *f, enum fio_ddir ddir)
1730 if (!f->lock || td->o.file_lock_mode == FILE_LOCK_NONE)
1733 if (td->o.file_lock_mode == FILE_LOCK_READWRITE) {
1734 if (ddir == DDIR_READ)
1735 fio_rwlock_read(f->rwlock);
1737 fio_rwlock_write(f->rwlock);
1738 } else if (td->o.file_lock_mode == FILE_LOCK_EXCLUSIVE)
1739 fio_sem_down(f->lock);
1741 td->file_locks[f->fileno] = td->o.file_lock_mode;
1744 void unlock_file(struct thread_data *td, struct fio_file *f)
1746 if (!f->lock || td->o.file_lock_mode == FILE_LOCK_NONE)
1749 if (td->o.file_lock_mode == FILE_LOCK_READWRITE)
1750 fio_rwlock_unlock(f->rwlock);
1751 else if (td->o.file_lock_mode == FILE_LOCK_EXCLUSIVE)
1752 fio_sem_up(f->lock);
1754 td->file_locks[f->fileno] = FILE_LOCK_NONE;
1757 void unlock_file_all(struct thread_data *td, struct fio_file *f)
1759 if (td->o.file_lock_mode == FILE_LOCK_NONE || !td->file_locks)
1761 if (td->file_locks[f->fileno] != FILE_LOCK_NONE)
1765 static bool recurse_dir(struct thread_data *td, const char *dirname)
1771 D = opendir(dirname);
1773 char buf[FIO_VERROR_SIZE];
1775 snprintf(buf, FIO_VERROR_SIZE, "opendir(%s)", dirname);
1776 td_verror(td, errno, buf);
1780 while ((dir = readdir(D)) != NULL) {
1781 char full_path[PATH_MAX];
1784 if (!strcmp(dir->d_name, ".") || !strcmp(dir->d_name, ".."))
1787 sprintf(full_path, "%s%c%s", dirname, FIO_OS_PATH_SEPARATOR, dir->d_name);
1789 if (lstat(full_path, &sb) == -1) {
1790 if (errno != ENOENT) {
1791 td_verror(td, errno, "stat");
1797 if (S_ISREG(sb.st_mode)) {
1798 add_file(td, full_path, 0, 1);
1801 if (!S_ISDIR(sb.st_mode))
1804 ret = recurse_dir(td, full_path);
1813 int add_dir_files(struct thread_data *td, const char *path)
1815 int ret = recurse_dir(td, path);
1818 log_info("fio: opendir added %d files\n", td->o.nr_files);
1823 void dup_files(struct thread_data *td, struct thread_data *org)
1828 dprint(FD_FILE, "dup files: %d\n", org->files_index);
1833 td->files = malloc(org->files_index * sizeof(f));
1835 if (td->o.file_lock_mode != FILE_LOCK_NONE)
1836 td->file_locks = malloc(org->files_index);
1838 for_each_file(org, f, i) {
1839 struct fio_file *__f;
1841 __f = alloc_new_file(td);
1844 if (td_ioengine_flagged(td, FIO_NOFILEHASH))
1845 __f->file_name = strdup(f->file_name);
1847 __f->file_name = smalloc_strdup(f->file_name);
1849 /* can't handle smalloc failure from here */
1850 assert(__f->file_name);
1851 __f->filetype = f->filetype;
1854 if (td->o.file_lock_mode == FILE_LOCK_EXCLUSIVE)
1855 __f->lock = f->lock;
1856 else if (td->o.file_lock_mode == FILE_LOCK_READWRITE)
1857 __f->rwlock = f->rwlock;
1864 * Returns the index that matches the filename, or -1 if not there
1866 int get_fileno(struct thread_data *td, const char *fname)
1871 for_each_file(td, f, i)
1872 if (!strcmp(f->file_name, fname))
1879 * For log usage, where we add/open/close files automatically
1881 void free_release_files(struct thread_data *td)
1885 td->o.open_files = 0;
1886 td->files_index = 0;
1889 void fio_file_reset(struct thread_data *td, struct fio_file *f)
1893 for (i = 0; i < DDIR_RWDIR_CNT; i++) {
1894 f->last_pos[i] = f->file_offset;
1895 f->last_start[i] = -1ULL;
1898 if (fio_file_axmap(f))
1899 axmap_reset(f->io_axmap);
1900 else if (fio_file_lfsr(f))
1901 lfsr_reset(&f->lfsr, td->rand_seeds[FIO_RAND_BLOCK_OFF]);
1903 zbd_file_reset(td, f);
1906 bool fio_files_done(struct thread_data *td)
1911 for_each_file(td, f, i)
1912 if (!fio_file_done(f))
1918 /* free memory used in initialization phase only */
1919 void filesetup_mem_free(void)
1921 free_already_allocated();
1925 * This function is for platforms which support direct I/O but not O_DIRECT.
1927 int fio_set_directio(struct thread_data *td, struct fio_file *f)
1929 #ifdef FIO_OS_DIRECTIO
1930 int ret = fio_set_odirect(f);
1933 td_verror(td, ret, "fio_set_directio");
1934 #if defined(__sun__)
1935 if (ret == ENOTTY) { /* ENOTTY suggests RAW device or ZFS */
1936 log_err("fio: doing directIO to RAW devices or ZFS not supported\n");
1938 log_err("fio: the file system does not seem to support direct IO\n");
1941 log_err("fio: the file system does not seem to support direct IO\n");
1948 log_err("fio: direct IO is not supported on this host operating system\n");