watchdog: Add watchdog timer support for the WinSystems EBC-C384

[linux-2.6-block.git] / drivers / watchdog / Kconfig

#
# Watchdog device configuration
#

menuconfig WATCHDOG
        bool "Watchdog Timer Support"
        ---help---
          If you say Y here (and to one of the following options) and create a
          character special file /dev/watchdog with major number 10 and minor
          number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
          subsequently opening the file and then failing to write to it for
          longer than 1 minute will result in rebooting the machine. This
          could be useful for a networked machine that needs to come back
          on-line as fast as possible after a lock-up. There's both a watchdog
          implementation entirely in software (which can sometimes fail to
          reboot the machine) and a driver for hardware watchdog boards, which
          are more robust and can also keep track of the temperature inside
          your computer. For details, read
          <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.

          The watchdog is usually used together with the watchdog daemon
          which is available from
          <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
          also monitor NFS connections and can reboot the machine when the process
          table is full.

          If unsure, say N.

if WATCHDOG

config WATCHDOG_CORE
        bool "WatchDog Timer Driver Core"
        ---help---
          Say Y here if you want to use the new watchdog timer driver core.
          This driver provides a framework for all watchdog timer drivers
          and gives them the /dev/watchdog interface (and later also the
          sysfs interface).

config WATCHDOG_NOWAYOUT
        bool "Disable watchdog shutdown on close"
        help
          The default watchdog behaviour (which you get if you say N here) is
          to stop the timer if the process managing it closes the file
          /dev/watchdog. It's always remotely possible that this process might
          get killed. If you say Y here, the watchdog cannot be stopped once
          it has been started.

config WATCHDOG_SYSFS
        bool "Read different watchdog information through sysfs"
        default n
        help
          Say Y here if you want to enable watchdog device status read through
          sysfs attributes.

#
# General Watchdog drivers
#

comment "Watchdog Device Drivers"

# Architecture Independent

config SOFT_WATCHDOG
        tristate "Software watchdog"
        select WATCHDOG_CORE
        help
          A software monitoring watchdog. This will fail to reboot your system
          from some situations that the hardware watchdog will recover
          from. Equally it's a lot cheaper to install.

          To compile this driver as a module, choose M here: the
          module will be called softdog.

config DA9052_WATCHDOG
        tristate "Dialog DA9052 Watchdog"
        depends on PMIC_DA9052
        select WATCHDOG_CORE
        help
          Support for the watchdog in the DA9052 PMIC. Watchdog trigger
          cause system reset.

          Say Y here to include support for the DA9052 watchdog.
          Alternatively say M to compile the driver as a module,
          which will be called da9052_wdt.

config DA9055_WATCHDOG
        tristate "Dialog Semiconductor DA9055 Watchdog"
        depends on MFD_DA9055
        select WATCHDOG_CORE
        help
          If you say yes here you get support for watchdog on the Dialog
          Semiconductor DA9055 PMIC.

          This driver can also be built as a module.  If so, the module
          will be called da9055_wdt.

config DA9063_WATCHDOG
        tristate "Dialog DA9063 Watchdog"
        depends on MFD_DA9063
        select WATCHDOG_CORE
        help
          Support for the watchdog in the DA9063 PMIC.

          This driver can be built as a module. The module name is da9063_wdt.

config DA9062_WATCHDOG
        tristate "Dialog DA9062 Watchdog"
        depends on MFD_DA9062
        select WATCHDOG_CORE
        help
          Support for the watchdog in the DA9062 PMIC.

          This driver can be built as a module. The module name is da9062_wdt.

config GPIO_WATCHDOG
        tristate "Watchdog device controlled through GPIO-line"
        depends on OF_GPIO
        select WATCHDOG_CORE
        help
          If you say yes here you get support for watchdog device
          controlled through GPIO-line.

config GPIO_WATCHDOG_ARCH_INITCALL
        bool "Register the watchdog as early as possible"
        depends on GPIO_WATCHDOG=y
        help
          In some situations, the default initcall level (module_init)
          in not early enough in the boot process to avoid the watchdog
          to be triggered.
          If you say yes here, the initcall level would be raised to
          arch_initcall.
          If in doubt, say N.

config MENF21BMC_WATCHDOG
        tristate "MEN 14F021P00 BMC Watchdog"
        depends on MFD_MENF21BMC
        select WATCHDOG_CORE
        help
          Say Y here to include support for the MEN 14F021P00 BMC Watchdog.

          This driver can also be built as a module. If so the module
          will be called menf21bmc_wdt.

config TANGOX_WATCHDOG
        tristate "Sigma Designs SMP86xx/SMP87xx watchdog"
        select WATCHDOG_CORE
        depends on ARCH_TANGO || COMPILE_TEST
        depends on HAS_IOMEM
        help
          Support for the watchdog in Sigma Designs SMP86xx (tango3)
          and SMP87xx (tango4) family chips.

          This driver can be built as a module. The module name is tangox_wdt.

config WM831X_WATCHDOG
        tristate "WM831x watchdog"
        depends on MFD_WM831X
        select WATCHDOG_CORE
        help
          Support for the watchdog in the WM831x AudioPlus PMICs.  When
          the watchdog triggers the system will be reset.

config WM8350_WATCHDOG
        tristate "WM8350 watchdog"
        depends on MFD_WM8350
        select WATCHDOG_CORE
        help
          Support for the watchdog in the WM8350 AudioPlus PMIC.  When
          the watchdog triggers the system will be reset.

config XILINX_WATCHDOG
        tristate "Xilinx Watchdog timer"
        depends on HAS_IOMEM
        select WATCHDOG_CORE
        help
          Watchdog driver for the xps_timebase_wdt ip core.

          To compile this driver as a module, choose M here: the
          module will be called of_xilinx_wdt.

config ZIIRAVE_WATCHDOG
        tristate "Zodiac RAVE Watchdog Timer"
        depends on I2C
        select WATCHDOG_CORE
        help
          Watchdog driver for the Zodiac Aerospace RAVE Switch Watchdog
          Processor.

          To compile this driver as a module, choose M here: the
          module will be called ziirave_wdt.

# ALPHA Architecture

# ARM Architecture

config ARM_SP805_WATCHDOG
        tristate "ARM SP805 Watchdog"
        depends on (ARM || ARM64) && ARM_AMBA
        select WATCHDOG_CORE
        help
          ARM Primecell SP805 Watchdog timer. This will reboot your system when
          the timeout is reached.

config ASM9260_WATCHDOG
        tristate "Alphascale ASM9260 watchdog"
        depends on MACH_ASM9260
        depends on OF
        select WATCHDOG_CORE
        select RESET_CONTROLLER
        help
          Watchdog timer embedded into Alphascale asm9260 chips. This will reboot your
          system when the timeout is reached.

config AT91RM9200_WATCHDOG
        tristate "AT91RM9200 watchdog"
        depends on SOC_AT91RM9200 && MFD_SYSCON
        help
          Watchdog timer embedded into AT91RM9200 chips. This will reboot your
          system when the timeout is reached.

config AT91SAM9X_WATCHDOG
        tristate "AT91SAM9X / AT91CAP9 watchdog"
        depends on ARCH_AT91
        select WATCHDOG_CORE
        help
          Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
          reboot your system when the timeout is reached.

config SAMA5D4_WATCHDOG
        tristate "Atmel SAMA5D4 Watchdog Timer"
        depends on ARCH_AT91
        select WATCHDOG_CORE
        help
          Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips.
          Its Watchdog Timer Mode Register can be written more than once.
          This will reboot your system when the timeout is reached.

config CADENCE_WATCHDOG
        tristate "Cadence Watchdog Timer"
        depends on HAS_IOMEM
        select WATCHDOG_CORE
        help
          Say Y here if you want to include support for the watchdog
          timer in the Xilinx Zynq.

config 21285_WATCHDOG
        tristate "DC21285 watchdog"
        depends on FOOTBRIDGE
        help
          The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
          here if you wish to use this. Alternatively say M to compile the
          driver as a module, which will be called wdt285.

          This driver does not work on all machines. In particular, early CATS
          boards have hardware problems that will cause the machine to simply
          lock up if the watchdog fires.

          "If in doubt, leave it out" - say N.

config 977_WATCHDOG
        tristate "NetWinder WB83C977 watchdog"
        depends on FOOTBRIDGE && ARCH_NETWINDER
        help
          Say Y here to include support for the WB977 watchdog included in
          NetWinder machines. Alternatively say M to compile the driver as
          a module, which will be called wdt977.

          Not sure? It's safe to say N.

config IXP4XX_WATCHDOG
        tristate "IXP4xx Watchdog"
        depends on ARCH_IXP4XX
        help
          Say Y here if to include support for the watchdog timer
          in the Intel IXP4xx network processors. This driver can
          be built as a module by choosing M. The module will
          be called ixp4xx_wdt.

          Note: The internal IXP4xx watchdog does a soft CPU reset
          which doesn't reset any peripherals. There are circumstances
          where the watchdog will fail to reset the board correctly
          (e.g., if the boot ROM is in an unreadable state).

          Say N if you are unsure.

config KS8695_WATCHDOG
        tristate "KS8695 watchdog"
        depends on ARCH_KS8695
        help
          Watchdog timer embedded into KS8695 processor. This will reboot your
          system when the timeout is reached.

config HAVE_S3C2410_WATCHDOG
        bool
        help
          This will include watchdog timer support for Samsung SoCs. If
          you want to include watchdog support for any machine, kindly
          select this in the respective mach-XXXX/Kconfig file.

config S3C2410_WATCHDOG
        tristate "S3C2410 Watchdog"
        depends on HAVE_S3C2410_WATCHDOG
        select WATCHDOG_CORE
        select MFD_SYSCON if ARCH_EXYNOS5
        help
          Watchdog timer block in the Samsung SoCs. This will reboot
          the system when the timer expires with the watchdog enabled.

          The driver is limited by the speed of the system's PCLK
          signal, so with reasonably fast systems (PCLK around 50-66MHz)
          then watchdog intervals of over approximately 20seconds are
          unavailable.

          The driver can be built as a module by choosing M, and will
          be called s3c2410_wdt

config SA1100_WATCHDOG
        tristate "SA1100/PXA2xx watchdog"
        depends on ARCH_SA1100 || ARCH_PXA
        help
          Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
          reboot your system when timeout is reached.

          NOTE: once enabled, this timer cannot be disabled.

          To compile this driver as a module, choose M here: the
          module will be called sa1100_wdt.

config DW_WATCHDOG
        tristate "Synopsys DesignWare watchdog"
        depends on HAS_IOMEM
        help
          Say Y here if to include support for the Synopsys DesignWare
          watchdog timer found in many chips.
          To compile this driver as a module, choose M here: the
          module will be called dw_wdt.

config EP93XX_WATCHDOG
        tristate "EP93xx Watchdog"
        depends on ARCH_EP93XX
        select WATCHDOG_CORE
        help
          Say Y here if to include support for the watchdog timer
          embedded in the Cirrus Logic EP93xx family of devices.

          To compile this driver as a module, choose M here: the
          module will be called ep93xx_wdt.

config OMAP_WATCHDOG
        tristate "OMAP Watchdog"
        depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
        select WATCHDOG_CORE
        help
          Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
          here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.

config PNX4008_WATCHDOG
        tristate "LPC32XX Watchdog"
        depends on ARCH_LPC32XX
        select WATCHDOG_CORE
        help
          Say Y here if to include support for the watchdog timer
          in the LPC32XX processor.
          This driver can be built as a module by choosing M. The module
          will be called pnx4008_wdt.

          Say N if you are unsure.

config IOP_WATCHDOG
        tristate "IOP Watchdog"
        depends on ARCH_IOP13XX
        select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
        help
          Say Y here if to include support for the watchdog timer
          in the Intel IOP3XX & IOP13XX I/O Processors.  This driver can
          be built as a module by choosing M. The module will
          be called iop_wdt.

          Note: The IOP13XX watchdog does an Internal Bus Reset which will
          affect both cores and the peripherals of the IOP.  The ATU-X
          and/or ATUe configuration registers will remain intact, but if
          operating as an Root Complex and/or Central Resource, the PCI-X
          and/or PCIe busses will also be reset.  THIS IS A VERY BIG HAMMER.

config DAVINCI_WATCHDOG
        tristate "DaVinci watchdog"
        depends on ARCH_DAVINCI || ARCH_KEYSTONE
        select WATCHDOG_CORE
        help
          Say Y here if to include support for the watchdog timer
          in the DaVinci DM644x/DM646x or Keystone processors.
          To compile this driver as a module, choose M here: the
          module will be called davinci_wdt.

          NOTE: once enabled, this timer cannot be disabled.
          Say N if you are unsure.

config ORION_WATCHDOG
        tristate "Orion watchdog"
        depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU
        depends on ARM
        select WATCHDOG_CORE
        help
          Say Y here if to include support for the watchdog timer
          in the Marvell Orion5x and Kirkwood ARM SoCs.
          To compile this driver as a module, choose M here: the
          module will be called orion_wdt.

config RN5T618_WATCHDOG
        tristate "Ricoh RN5T618 watchdog"
        depends on MFD_RN5T618
        select WATCHDOG_CORE
        help
          If you say yes here you get support for watchdog on the Ricoh
          RN5T618 PMIC.

          This driver can also be built as a module.  If so, the module
          will be called rn5t618_wdt.

config SUNXI_WATCHDOG
        tristate "Allwinner SoCs watchdog support"
        depends on ARCH_SUNXI
        select WATCHDOG_CORE
        help
          Say Y here to include support for the watchdog timer
          in Allwinner SoCs.
          To compile this driver as a module, choose M here: the
          module will be called sunxi_wdt.

config COH901327_WATCHDOG
        bool "ST-Ericsson COH 901 327 watchdog"
        depends on ARCH_U300
        default y if MACH_U300
        select WATCHDOG_CORE
        help
          Say Y here to include Watchdog timer support for the
          watchdog embedded into the ST-Ericsson U300 series platforms.
          This watchdog is used to reset the system and thus cannot be
          compiled as a module.

config TWL4030_WATCHDOG
        tristate "TWL4030 Watchdog"
        depends on TWL4030_CORE
        select WATCHDOG_CORE
        help
          Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
          watchdog timer support for TWL4030 chips.

config STMP3XXX_RTC_WATCHDOG
        tristate "Freescale STMP3XXX & i.MX23/28 watchdog"
        depends on RTC_DRV_STMP
        select WATCHDOG_CORE
        help
          Say Y here to include support for the watchdog timer inside
          the RTC for the STMP37XX/378X or i.MX23/28 SoC.
          To compile this driver as a module, choose M here: the
          module will be called stmp3xxx_rtc_wdt.

config NUC900_WATCHDOG
        tristate "Nuvoton NUC900 watchdog"
        depends on ARCH_W90X900
        help
          Say Y here if to include support for the watchdog timer
          for the Nuvoton NUC900 series SoCs.
          To compile this driver as a module, choose M here: the
          module will be called nuc900_wdt.

config TS4800_WATCHDOG
        tristate "TS-4800 Watchdog"
        depends on HAS_IOMEM && OF
        depends on SOC_IMX51 || COMPILE_TEST
        select WATCHDOG_CORE
        select MFD_SYSCON
        help
          Technologic Systems TS-4800 has watchdog timer implemented in
          an external FPGA. Say Y here if you want to support for the
          watchdog timer on TS-4800 board.

config TS72XX_WATCHDOG
        tristate "TS-72XX SBC Watchdog"
        depends on MACH_TS72XX
        help
          Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
          watchdog timer implemented in a external CPLD chip. Say Y here
          if you want to support for the watchdog timer on TS-72XX boards.

          To compile this driver as a module, choose M here: the
          module will be called ts72xx_wdt.

config MAX63XX_WATCHDOG
        tristate "Max63xx watchdog"
        depends on HAS_IOMEM
        select WATCHDOG_CORE
        help
          Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.

config IMX2_WDT
        tristate "IMX2+ Watchdog"
        depends on ARCH_MXC || ARCH_LAYERSCAPE
        select REGMAP_MMIO
        select WATCHDOG_CORE
        help
          This is the driver for the hardware watchdog
          on the Freescale IMX2 and later processors.
          If you have one of these processors and wish to have
          watchdog support enabled, say Y, otherwise say N.

          To compile this driver as a module, choose M here: the
          module will be called imx2_wdt.

config UX500_WATCHDOG
        tristate "ST-Ericsson Ux500 watchdog"
        depends on MFD_DB8500_PRCMU
        select WATCHDOG_CORE
        default y
        help
          Say Y here to include Watchdog timer support for the watchdog
          existing in the prcmu of ST-Ericsson Ux500 series platforms.

          To compile this driver as a module, choose M here: the
          module will be called ux500_wdt.

config RETU_WATCHDOG
        tristate "Retu watchdog"
        depends on MFD_RETU
        select WATCHDOG_CORE
        help
          Retu watchdog driver for Nokia Internet Tablets (770, N800,
          N810). At least on N800 the watchdog cannot be disabled, so
          this driver is essential and you should enable it.

          To compile this driver as a module, choose M here: the
          module will be called retu_wdt.

config MOXART_WDT
        tristate "MOXART watchdog"
        depends on ARCH_MOXART
        help
          Say Y here to include Watchdog timer support for the watchdog
          existing on the MOXA ART SoC series platforms.

          To compile this driver as a module, choose M here: the
          module will be called moxart_wdt.

config SIRFSOC_WATCHDOG
        tristate "SiRFSOC watchdog"
        depends on ARCH_SIRF
        select WATCHDOG_CORE
        default y
        help
          Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
          the watchdog triggers the system will be reset.

config ST_LPC_WATCHDOG
        tristate "STMicroelectronics LPC Watchdog"
        depends on ARCH_STI
        depends on OF
        select WATCHDOG_CORE
        help
          Say Y here to include STMicroelectronics Low Power Controller
          (LPC) based Watchdog timer support.

          To compile this driver as a module, choose M here: the
          module will be called st_lpc_wdt.

config TEGRA_WATCHDOG
        tristate "Tegra watchdog"
        depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM
        select WATCHDOG_CORE
        help
          Say Y here to include support for the watchdog timer
          embedded in NVIDIA Tegra SoCs.

          To compile this driver as a module, choose M here: the
          module will be called tegra_wdt.

config QCOM_WDT
        tristate "QCOM watchdog"
        depends on HAS_IOMEM
        depends on ARCH_QCOM
        select WATCHDOG_CORE
        help
          Say Y here to include Watchdog timer support for the watchdog found
          on QCOM chipsets.  Currently supported targets are the MSM8960,
          APQ8064, and IPQ8064.

          To compile this driver as a module, choose M here: the
          module will be called qcom_wdt.

config MESON_WATCHDOG
        tristate "Amlogic Meson SoCs watchdog support"
        depends on ARCH_MESON
        select WATCHDOG_CORE
        help
          Say Y here to include support for the watchdog timer
          in Amlogic Meson SoCs.
          To compile this driver as a module, choose M here: the
          module will be called meson_wdt.

config MEDIATEK_WATCHDOG
        tristate "Mediatek SoCs watchdog support"
        depends on ARCH_MEDIATEK
        select WATCHDOG_CORE
        help
          Say Y here to include support for the watchdog timer
          in Mediatek SoCs.
          To compile this driver as a module, choose M here: the
          module will be called mtk_wdt.

config DIGICOLOR_WATCHDOG
        tristate "Conexant Digicolor SoCs watchdog support"
        depends on ARCH_DIGICOLOR
        select WATCHDOG_CORE
        help
          Say Y here to include support for the watchdog timer
          in Conexant Digicolor SoCs.
          To compile this driver as a module, choose M here: the
          module will be called digicolor_wdt.

config LPC18XX_WATCHDOG
        tristate "LPC18xx/43xx Watchdog"
        depends on ARCH_LPC18XX || COMPILE_TEST
        depends on HAS_IOMEM
        select WATCHDOG_CORE
        help
          Say Y here if to include support for the watchdog timer
          in NXP LPC SoCs family, which includes LPC18xx/LPC43xx
          processors.
          To compile this driver as a module, choose M here: the
          module will be called lpc18xx_wdt.

config ATLAS7_WATCHDOG
        tristate "CSRatlas7 watchdog"
        depends on ARCH_ATLAS7
        help
          Say Y here to include Watchdog timer support for the watchdog
          existing on the CSRatlas7 series platforms.

          To compile this driver as a module, choose M here: the
          module will be called atlas7_wdt.

# AVR32 Architecture

config AT32AP700X_WDT
        tristate "AT32AP700x watchdog"
        depends on CPU_AT32AP700X
        help
          Watchdog timer embedded into AT32AP700x devices. This will reboot
          your system when the timeout is reached.

# BLACKFIN Architecture

config BFIN_WDT
        tristate "Blackfin On-Chip Watchdog Timer"
        depends on BLACKFIN
        ---help---
          If you say yes here you will get support for the Blackfin On-Chip
          Watchdog Timer. If you have one of these processors and wish to
          have watchdog support enabled, say Y, otherwise say N.

          To compile this driver as a module, choose M here: the
          module will be called bfin_wdt.

# CRIS Architecture

# FRV Architecture

# X86 (i386 + ia64 + x86_64) Architecture

config ACQUIRE_WDT
        tristate "Acquire SBC Watchdog Timer"
        depends on X86
        ---help---
          This is the driver for the hardware watchdog on Single Board
          Computers produced by Acquire Inc (and others). This watchdog
          simply watches your kernel to make sure it doesn't freeze, and if
          it does, it reboots your computer after a certain amount of time.

          To compile this driver as a module, choose M here: the
          module will be called acquirewdt.

          Most people will say N.

config ADVANTECH_WDT
        tristate "Advantech SBC Watchdog Timer"
        depends on X86
        help
          If you are configuring a Linux kernel for the Advantech single-board
          computer, say `Y' here to support its built-in watchdog timer
          feature. More information can be found at
          <http://www.advantech.com.tw/products/>

config ALIM1535_WDT
        tristate "ALi M1535 PMU Watchdog Timer"
        depends on X86 && PCI
        ---help---
          This is the driver for the hardware watchdog on the ALi M1535 PMU.

          To compile this driver as a module, choose M here: the
          module will be called alim1535_wdt.

          Most people will say N.

config ALIM7101_WDT
        tristate "ALi M7101 PMU Computer Watchdog"
        depends on PCI
        help
          This is the driver for the hardware watchdog on the ALi M7101 PMU
          as used in the x86 Cobalt servers and also found in some
          SPARC Netra servers too.

          To compile this driver as a module, choose M here: the
          module will be called alim7101_wdt.

          Most people will say N.

config EBC_C384_WDT
        tristate "WinSystems EBC-C384 Watchdog Timer"
        depends on X86
        select WATCHDOG_CORE
        help
          Enables watchdog timer support for the watchdog timer on the
          WinSystems EBC-C384 motherboard. The timeout may be configured via
          the timeout module parameter.

config F71808E_WDT
        tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog"
        depends on X86
        help
          This is the driver for the hardware watchdog on the Fintek
          F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers.

          You can compile this driver directly into the kernel, or use
          it as a module.  The module will be called f71808e_wdt.

config SP5100_TCO
        tristate "AMD/ATI SP5100 TCO Timer/Watchdog"
        depends on X86 && PCI
        ---help---
          Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO
          (Total Cost of Ownership) timer is a watchdog timer that will reboot
          the machine after its expiration. The expiration time can be
          configured with the "heartbeat" parameter.

          To compile this driver as a module, choose M here: the
          module will be called sp5100_tco.

config GEODE_WDT
        tristate "AMD Geode CS5535/CS5536 Watchdog"
        depends on CS5535_MFGPT
        help
          This driver enables a watchdog capability built into the
          CS5535/CS5536 companion chips for the AMD Geode GX and LX
          processors.  This watchdog watches your kernel to make sure
          it doesn't freeze, and if it does, it reboots your computer after
          a certain amount of time.

          You can compile this driver directly into the kernel, or use
          it as a module.  The module will be called geodewdt.

config SC520_WDT
        tristate "AMD Elan SC520 processor Watchdog"
        depends on MELAN
        help
          This is the driver for the hardware watchdog built in to the
          AMD "Elan" SC520 microcomputer commonly used in embedded systems.
          This watchdog simply watches your kernel to make sure it doesn't
          freeze, and if it does, it reboots your computer after a certain
          amount of time.

          You can compile this driver directly into the kernel, or use
          it as a module.  The module will be called sc520_wdt.

config SBC_FITPC2_WATCHDOG
        tristate "Compulab SBC-FITPC2 watchdog"
        depends on X86
        ---help---
          This is the driver for the built-in watchdog timer on the fit-PC2,
          fit-PC2i, CM-iAM single-board computers made by Compulab.

          It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
          When "Watchdog Timer Value" enabled one can set 31-255 s operational range.

          Entering BIOS setup temporary disables watchdog operation regardless to current state,
          so system will not be restarted while user in BIOS setup.

          Once watchdog was enabled the system will be restarted every
          "Watchdog Timer Value" period, so to prevent it user can restart or
          disable the watchdog.

          To compile this driver as a module, choose M here: the
          module will be called sbc_fitpc2_wdt.

          Most people will say N.

config EUROTECH_WDT
        tristate "Eurotech CPU-1220/1410 Watchdog Timer"
        depends on X86
        help
          Enable support for the watchdog timer on the Eurotech CPU-1220 and
          CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
          information are at <http://www.eurotech.it/>.

config IB700_WDT
        tristate "IB700 SBC Watchdog Timer"
        depends on X86
        ---help---
          This is the driver for the hardware watchdog on the IB700 Single
          Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
          simply watches your kernel to make sure it doesn't freeze, and if
          it does, it reboots your computer after a certain amount of time.

          This driver is like the WDT501 driver but for slightly different hardware.

          To compile this driver as a module, choose M here: the
          module will be called ib700wdt.

          Most people will say N.

config IBMASR
        tristate "IBM Automatic Server Restart"
        depends on X86
        help
          This is the driver for the IBM Automatic Server Restart watchdog
          timer built-in into some eServer xSeries machines.

          To compile this driver as a module, choose M here: the
          module will be called ibmasr.

config WAFER_WDT
        tristate "ICP Single Board Computer Watchdog Timer"
        depends on X86
        help
          This is a driver for the hardware watchdog on the ICP Single
          Board Computer. This driver is working on (at least) the following
          IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782.

          To compile this driver as a module, choose M here: the
          module will be called wafer5823wdt.

config I6300ESB_WDT
        tristate "Intel 6300ESB Timer/Watchdog"
        depends on PCI
        ---help---
          Hardware driver for the watchdog timer built into the Intel
          6300ESB controller hub.

          To compile this driver as a module, choose M here: the
          module will be called i6300esb.

config IE6XX_WDT
        tristate "Intel Atom E6xx Watchdog"
        depends on X86 && PCI
        select WATCHDOG_CORE
        select MFD_CORE
        select LPC_SCH
        ---help---
          Hardware driver for the watchdog timer built into the Intel
          Atom E6XX (TunnelCreek) processor.

          To compile this driver as a module, choose M here: the
          module will be called ie6xx_wdt.

config INTEL_SCU_WATCHDOG
        bool "Intel SCU Watchdog for Mobile Platforms"
        depends on X86_INTEL_MID
        ---help---
          Hardware driver for the watchdog time built into the Intel SCU
          for Intel Mobile Platforms.

          To compile this driver as a module, choose M here.

config INTEL_MID_WATCHDOG
        tristate "Intel MID Watchdog Timer"
        depends on X86_INTEL_MID
        select WATCHDOG_CORE
        ---help---
          Watchdog timer driver built into the Intel SCU for Intel MID
          Platforms.

          This driver currently supports only the watchdog evolution
          implementation in SCU, available for Merrifield generation.

          To compile this driver as a module, choose M here.

config ITCO_WDT
        tristate "Intel TCO Timer/Watchdog"
        depends on (X86 || IA64) && PCI
        select WATCHDOG_CORE
        depends on I2C || I2C=n
        select LPC_ICH if !EXPERT
        select I2C_I801 if !EXPERT && I2C
        ---help---
          Hardware driver for the intel TCO timer based watchdog devices.
          These drivers are included in the Intel 82801 I/O Controller
          Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
          controller hub.

          The TCO (Total Cost of Ownership) timer is a watchdog timer
          that will reboot the machine after its second expiration. The
          expiration time can be configured with the "heartbeat" parameter.

          On some motherboards the driver may fail to reset the chipset's
          NO_REBOOT flag which prevents the watchdog from rebooting the
          machine. If this is the case you will get a kernel message like
          "failed to reset NO_REBOOT flag, reboot disabled by hardware".

          To compile this driver as a module, choose M here: the
          module will be called iTCO_wdt.

config ITCO_VENDOR_SUPPORT
        bool "Intel TCO Timer/Watchdog Specific Vendor Support"
        depends on ITCO_WDT
        ---help---
          Add vendor specific support to the intel TCO timer based watchdog
          devices. At this moment we only have additional support for some
          SuperMicro Inc. motherboards.

config IT8712F_WDT
        tristate "IT8712F (Smart Guardian) Watchdog Timer"
        depends on X86
        ---help---
          This is the driver for the built-in watchdog timer on the IT8712F
          Super I/0 chipset used on many motherboards.

          If the driver does not work, then make sure that the game port in
          the BIOS is enabled.

          To compile this driver as a module, choose M here: the
          module will be called it8712f_wdt.

config IT87_WDT
        tristate "IT87 Watchdog Timer"
        depends on X86
        ---help---
          This is the driver for the hardware watchdog on the ITE IT8702,
          IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728
          Super I/O chips.

          If the driver does not work, then make sure that the game port in
          the BIOS is enabled.

          This watchdog simply watches your kernel to make sure it doesn't
          freeze, and if it does, it reboots your computer after a certain
          amount of time.

          To compile this driver as a module, choose M here: the module will
          be called it87_wdt.

config HP_WATCHDOG
        tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
        depends on X86 && PCI
        help
          A software monitoring watchdog and NMI sourcing driver. This driver
          will detect lockups and provide a stack trace. This is a driver that
          will only load on an HP ProLiant system with a minimum of iLO2 support.
          To compile this driver as a module, choose M here: the module will be
          called hpwdt.

config KEMPLD_WDT
        tristate "Kontron COM Watchdog Timer"
        depends on MFD_KEMPLD
        select WATCHDOG_CORE
        help
          Support for the PLD watchdog on some Kontron ETX and COMexpress
          (ETXexpress) modules

          This driver can also be built as a module. If so, the module will be
          called kempld_wdt.

config HPWDT_NMI_DECODING
        bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
        depends on HP_WATCHDOG
        default y
        help
          When an NMI occurs this feature will make the necessary BIOS calls to
          log the cause of the NMI.

config SC1200_WDT
        tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
        depends on X86
        help
          This is a driver for National Semiconductor PC87307/PC97307 hardware
          watchdog cards as found on the SC1200. This watchdog is mainly used
          for power management purposes and can be used to power down the device
          during inactivity periods (includes interrupt activity monitoring).

          To compile this driver as a module, choose M here: the
          module will be called sc1200wdt.

          Most people will say N.

config SCx200_WDT
        tristate "National Semiconductor SCx200 Watchdog"
        depends on SCx200 && PCI
        help
          Enable the built-in watchdog timer support on the National
          Semiconductor SCx200 processors.

          If compiled as a module, it will be called scx200_wdt.

config PC87413_WDT
        tristate "NS PC87413 watchdog"
        depends on X86
        ---help---
          This is the driver for the hardware watchdog on the PC87413 chipset
          This watchdog simply watches your kernel to make sure it doesn't
          freeze, and if it does, it reboots your computer after a certain
          amount of time.

          To compile this driver as a module, choose M here: the
          module will be called pc87413_wdt.

          Most people will say N.

config NV_TCO
        tristate "nVidia TCO Timer/Watchdog"
        depends on X86 && PCI
        ---help---
          Hardware driver for the TCO timer built into the nVidia Hub family
          (such as the MCP51).  The TCO (Total Cost of Ownership) timer is a
          watchdog timer that will reboot the machine after its second
          expiration. The expiration time can be configured with the
          "heartbeat" parameter.

          On some motherboards the driver may fail to reset the chipset's
          NO_REBOOT flag which prevents the watchdog from rebooting the
          machine. If this is the case you will get a kernel message like
          "failed to reset NO_REBOOT flag, reboot disabled by hardware".

          To compile this driver as a module, choose M here: the
          module will be called nv_tco.

config RDC321X_WDT
        tristate "RDC R-321x SoC watchdog"
        depends on X86_RDC321X
        help
          This is the driver for the built in hardware watchdog
          in the RDC R-321x SoC.

          To compile this driver as a module, choose M here: the
          module will be called rdc321x_wdt.

config 60XX_WDT
        tristate "SBC-60XX Watchdog Timer"
        depends on X86
        help
          This driver can be used with the watchdog timer found on some
          single board computers, namely the 6010 PII based computer.
          It may well work with other cards.  It reads port 0x443 to enable
          and re-set the watchdog timer, and reads port 0x45 to disable
          the watchdog.  If you have a card that behave in similar ways,
          you can probably make this driver work with your card as well.

          You can compile this driver directly into the kernel, or use
          it as a module.  The module will be called sbc60xxwdt.

config SBC8360_WDT
        tristate "SBC8360 Watchdog Timer"
        depends on X86_32
        ---help---

          This is the driver for the hardware watchdog on the SBC8360 Single
          Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).

          To compile this driver as a module, choose M here: the
          module will be called sbc8360.

          Most people will say N.

config SBC7240_WDT
        tristate "SBC Nano 7240 Watchdog Timer"
        depends on X86_32 && !UML
        ---help---
          This is the driver for the hardware watchdog found on the IEI
          single board computers EPIC Nano 7240 (and likely others). This
          watchdog simply watches your kernel to make sure it doesn't freeze,
          and if it does, it reboots your computer after a certain amount of
          time.

          To compile this driver as a module, choose M here: the
          module will be called sbc7240_wdt.

config CPU5_WDT
        tristate "SMA CPU5 Watchdog"
        depends on X86
        ---help---
          TBD.
          To compile this driver as a module, choose M here: the
          module will be called cpu5wdt.

config SMSC_SCH311X_WDT
        tristate "SMSC SCH311X Watchdog Timer"
        depends on X86
        ---help---
          This is the driver for the hardware watchdog timer on the
          SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
          (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
          serial ports).

          To compile this driver as a module, choose M here: the
          module will be called sch311x_wdt.

config SMSC37B787_WDT
        tristate "Winbond SMsC37B787 Watchdog Timer"
        depends on X86
        ---help---
          This is the driver for the hardware watchdog component on the
          Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
          from Vision Systems and maybe others.

          This watchdog simply watches your kernel to make sure it doesn't
          freeze, and if it does, it reboots your computer after a certain
          amount of time.

          Usually a userspace daemon will notify the kernel WDT driver that
          userspace is still alive, at regular intervals.

          To compile this driver as a module, choose M here: the
          module will be called smsc37b787_wdt.

          Most people will say N.

config VIA_WDT
        tristate "VIA Watchdog Timer"
        depends on X86 && PCI
        select WATCHDOG_CORE
        ---help---
        This is the driver for the hardware watchdog timer on VIA
        southbridge chipset CX700, VX800/VX820 or VX855/VX875.

        To compile this driver as a module, choose M here; the module
        will be called via_wdt.

        Most people will say N.

config W83627HF_WDT
        tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
        depends on X86
        select WATCHDOG_CORE
        ---help---
          This is the driver for the hardware watchdog on the following
          Super I/O chips.
                W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG
                W83637HF
                W83667HG/HG-B
                W83687THF
                W83697HF
                W83697UG
                NCT6775
                NCT6776
                NCT6779
                NCT6791
                NCT6792
                NCT6102D/04D/06D

          This watchdog simply watches your kernel to make sure it doesn't
          freeze, and if it does, it reboots your computer after a certain
          amount of time.

          To compile this driver as a module, choose M here: the
          module will be called w83627hf_wdt.

          Most people will say N.

config W83877F_WDT
        tristate "W83877F (EMACS) Watchdog Timer"
        depends on X86
        ---help---
          This is the driver for the hardware watchdog on the W83877F chipset
          as used in EMACS PC-104 motherboards (and likely others).  This
          watchdog simply watches your kernel to make sure it doesn't freeze,
          and if it does, it reboots your computer after a certain amount of
          time.

          To compile this driver as a module, choose M here: the
          module will be called w83877f_wdt.

          Most people will say N.

config W83977F_WDT
        tristate "W83977F (PCM-5335) Watchdog Timer"
        depends on X86
        ---help---
          This is the driver for the hardware watchdog on the W83977F I/O chip
          as used in AAEON's PCM-5335 SBC (and likely others).  This
          watchdog simply watches your kernel to make sure it doesn't freeze,
          and if it does, it reboots your computer after a certain amount of
          time.

          To compile this driver as a module, choose M here: the
          module will be called w83977f_wdt.

config MACHZ_WDT
        tristate "ZF MachZ Watchdog"
        depends on X86
        ---help---
          If you are using a ZF Micro MachZ processor, say Y here, otherwise
          N.  This is the driver for the watchdog timer built-in on that
          processor using ZF-Logic interface.  This watchdog simply watches
          your kernel to make sure it doesn't freeze, and if it does, it
          reboots your computer after a certain amount of time.

          To compile this driver as a module, choose M here: the
          module will be called machzwd.

config SBC_EPX_C3_WATCHDOG
        tristate "Winsystems SBC EPX-C3 watchdog"
        depends on X86
        ---help---
          This is the driver for the built-in watchdog timer on the EPX-C3
          Single-board computer made by Winsystems, Inc.

          *Note*: This hardware watchdog is not probeable and thus there
          is no way to know if writing to its IO address will corrupt
          your system or have any real effect.  The only way to be sure
          that this driver does what you want is to make sure you
          are running it on an EPX-C3 from Winsystems with the watchdog
          timer at IO address 0x1ee and 0x1ef.  It will write to both those
          IO ports.  Basically, the assumption is made that if you compile
          this driver into your kernel and/or load it as a module, that you
          know what you are doing and that you are in fact running on an
          EPX-C3 board!

          To compile this driver as a module, choose M here: the
          module will be called sbc_epx_c3.

config NI903X_WDT
        tristate "NI 903x/913x Watchdog"
        depends on X86 && ACPI
        select WATCHDOG_CORE
        ---help---
          This is the driver for the watchdog timer on the National Instruments
          903x/913x real-time controllers.

          To compile this driver as a module, choose M here: the module will be
          called ni903x_wdt.

# M32R Architecture

# M68K Architecture

config M54xx_WATCHDOG
        tristate "MCF54xx watchdog support"
        depends on M548x
        help
          To compile this driver as a module, choose M here: the
          module will be called m54xx_wdt.

# MicroBlaze Architecture

# MIPS Architecture

config ATH79_WDT
        tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog"
        depends on ATH79
        help
          Hardware driver for the built-in watchdog timer on the Atheros
          AR71XX/AR724X/AR913X SoCs.

config BCM47XX_WDT
        tristate "Broadcom BCM47xx Watchdog Timer"
        depends on BCM47XX || ARCH_BCM_5301X
        select WATCHDOG_CORE
        help
          Hardware driver for the Broadcom BCM47xx Watchdog Timer.

config RC32434_WDT
        tristate "IDT RC32434 SoC Watchdog Timer"
        depends on MIKROTIK_RB532
        help
          Hardware driver for the IDT RC32434 SoC built-in
          watchdog timer.

          To compile this driver as a module, choose M here: the
          module will be called rc32434_wdt.

config INDYDOG
        tristate "Indy/I2 Hardware Watchdog"
        depends on SGI_HAS_INDYDOG
        help
          Hardware driver for the Indy's/I2's watchdog. This is a
          watchdog timer that will reboot the machine after a 60 second
          timer expired and no process has written to /dev/watchdog during
          that time.

config JZ4740_WDT
        tristate "Ingenic jz4740 SoC hardware watchdog"
        depends on MACH_JZ4740
        select WATCHDOG_CORE
        help
          Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.

config WDT_MTX1
        tristate "MTX-1 Hardware Watchdog"
        depends on MIPS_MTX1
        help
          Hardware driver for the MTX-1 boards. This is a watchdog timer that
          will reboot the machine after a 100 seconds timer expired.

config PNX833X_WDT
        tristate "PNX833x Hardware Watchdog"
        depends on SOC_PNX8335
        help
          Hardware driver for the PNX833x's watchdog. This is a
          watchdog timer that will reboot the machine after a programmable
          timer has expired and no process has written to /dev/watchdog during
          that time.

config SIBYTE_WDOG
        tristate "Sibyte SoC hardware watchdog"
        depends on CPU_SB1
        help
          Watchdog driver for the built in watchdog hardware in Sibyte
          SoC processors.  There are apparently two watchdog timers
          on such processors; this driver supports only the first one,
          because currently Linux only supports exporting one watchdog
          to userspace.

          To compile this driver as a loadable module, choose M here.
          The module will be called sb_wdog.

config AR7_WDT
        tristate "TI AR7 Watchdog Timer"
        depends on AR7
        help
          Hardware driver for the TI AR7 Watchdog Timer.

config TXX9_WDT
        tristate "Toshiba TXx9 Watchdog Timer"
        depends on CPU_TX39XX || CPU_TX49XX
        select WATCHDOG_CORE
        help
          Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.

config OCTEON_WDT
        tristate "Cavium OCTEON SOC family Watchdog Timer"
        depends on CAVIUM_OCTEON_SOC
        default y
        select WATCHDOG_CORE
        select EXPORT_UASM if OCTEON_WDT = m
        help
          Hardware driver for OCTEON's on chip watchdog timer.
          Enables the watchdog for all cores running Linux. It
          installs a NMI handler and pokes the watchdog based on an
          interrupt.  On first expiration of the watchdog, the
          interrupt handler pokes it.  The second expiration causes an
          NMI that prints a message. The third expiration causes a
          global soft reset.

          When userspace has /dev/watchdog open, no poking is done
          from the first interrupt, it is then only poked when the
          device is written.

config BCM63XX_WDT
        tristate "Broadcom BCM63xx hardware watchdog"
        depends on BCM63XX
        help
          Watchdog driver for the built in watchdog hardware in Broadcom
          BCM63xx SoC.

          To compile this driver as a loadable module, choose M here.
          The module will be called bcm63xx_wdt.

config BCM2835_WDT
        tristate "Broadcom BCM2835 hardware watchdog"
        depends on ARCH_BCM2835
        select WATCHDOG_CORE
        help
          Watchdog driver for the built in watchdog hardware in Broadcom
          BCM2835 SoC.

          To compile this driver as a loadable module, choose M here.
          The module will be called bcm2835_wdt.

config BCM_KONA_WDT
        tristate "BCM Kona Watchdog"
        depends on ARCH_BCM_MOBILE
        select WATCHDOG_CORE
        help
          Support for the watchdog timer on the following Broadcom BCM281xx
          family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and
          BCM28155 variants.

          Say 'Y' or 'M' here to enable the driver. The module will be called
          bcm_kona_wdt.

config BCM_KONA_WDT_DEBUG
        bool "DEBUGFS support for BCM Kona Watchdog"
        depends on BCM_KONA_WDT
        help
          If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides
          access to the driver's internal data structures as well as watchdog
          timer hardware registres.

          If in doubt, say 'N'.

config BCM7038_WDT
        tristate "BCM7038 Watchdog"
        select WATCHDOG_CORE
        depends on HAS_IOMEM
        depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
        help
         Watchdog driver for the built-in hardware in Broadcom 7038 and
         later SoCs used in set-top boxes.  BCM7038 was made public
         during the 2004 CES, and since then, many Broadcom chips use this
         watchdog block, including some cable modem chips.

config IMGPDC_WDT
        tristate "Imagination Technologies PDC Watchdog Timer"
        depends on HAS_IOMEM
        depends on METAG || MIPS || COMPILE_TEST
        select WATCHDOG_CORE
        help
          Driver for Imagination Technologies PowerDown Controller
          Watchdog Timer.

          To compile this driver as a loadable module, choose M here.
          The module will be called imgpdc_wdt.

config LANTIQ_WDT
        tristate "Lantiq SoC watchdog"
        depends on LANTIQ
        help
          Hardware driver for the Lantiq SoC Watchdog Timer.

config RALINK_WDT
        tristate "Ralink SoC watchdog"
        select WATCHDOG_CORE
        depends on RALINK
        help
          Hardware driver for the Ralink SoC Watchdog Timer.

config MT7621_WDT
        tristate "Mediatek SoC watchdog"
        select WATCHDOG_CORE
        depends on SOC_MT7620 || SOC_MT7621
        help
          Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer.

# PARISC Architecture

# POWERPC Architecture

config GEF_WDT
        tristate "GE Watchdog Timer"
        depends on GE_FPGA
        ---help---
          Watchdog timer found in a number of GE single board computers.

config MPC5200_WDT
        bool "MPC52xx Watchdog Timer"
        depends on PPC_MPC52xx
        help
          Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.

config 8xxx_WDT
        tristate "MPC8xxx Platform Watchdog Timer"
        depends on PPC_8xx || PPC_83xx || PPC_86xx || PPC_MPC512x
        select WATCHDOG_CORE
        help
          This driver is for a SoC level watchdog that exists on some
          Freescale PowerPC processors. So far this driver supports:
          - MPC8xx watchdogs
          - MPC83xx watchdogs
          - MPC86xx watchdogs

          For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.

config MV64X60_WDT
        tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
        depends on MV64X60

config PIKA_WDT
        tristate "PIKA FPGA Watchdog"
        depends on WARP
        default y
        help
          This enables the watchdog in the PIKA FPGA. Currently used on
          the Warp platform.

config BOOKE_WDT
        tristate "PowerPC Book-E Watchdog Timer"
        depends on BOOKE || 4xx
        select WATCHDOG_CORE
        ---help---
          Watchdog driver for PowerPC Book-E chips, such as the Freescale
          MPC85xx SOCs and the IBM PowerPC 440.

          Please see Documentation/watchdog/watchdog-api.txt for
          more information.

config BOOKE_WDT_DEFAULT_TIMEOUT
        int "PowerPC Book-E Watchdog Timer Default Timeout"
        depends on BOOKE_WDT
        default 38 if PPC_FSL_BOOK3E
        range 0 63 if PPC_FSL_BOOK3E
        default 3 if !PPC_FSL_BOOK3E
        range 0 3 if !PPC_FSL_BOOK3E
        help
          Select the default watchdog timer period to be used by the PowerPC
          Book-E watchdog driver.  A watchdog "event" occurs when the bit
          position represented by this number transitions from zero to one.

          For Freescale Book-E processors, this is a number between 0 and 63.
          For other Book-E processors, this is a number between 0 and 3.

          The value can be overridden by the wdt_period command-line parameter.

config MEN_A21_WDT
       tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
       select WATCHDOG_CORE
       depends on GPIOLIB || COMPILE_TEST
       help
        Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.

        The driver can also be built as a module. If so, the module will be
        called mena21_wdt.

        If unsure select N here.

# PPC64 Architecture

config WATCHDOG_RTAS
        tristate "RTAS watchdog"
        depends on PPC_RTAS
        help
          This driver adds watchdog support for the RTAS watchdog.

          To compile this driver as a module, choose M here. The module
          will be called wdrtas.

# S390 Architecture

config DIAG288_WATCHDOG
        tristate "System z diag288 Watchdog"
        depends on S390
        select WATCHDOG_CORE
        help
          IBM s/390 and zSeries machines running under z/VM 5.1 or later
          provide a virtual watchdog timer to their guest that cause a
          user define Control Program command to be executed after a
          timeout.
          LPAR provides a very similar interface. This driver handles
          both.

          To compile this driver as a module, choose M here. The module
          will be called diag288_wdt.

# SUPERH (sh + sh64) Architecture

config SH_WDT
        tristate "SuperH Watchdog"
        depends on SUPERH && (CPU_SH3 || CPU_SH4)
        select WATCHDOG_CORE
        help
          This driver adds watchdog support for the integrated watchdog in the
          SuperH processors. If you have one of these processors and wish
          to have watchdog support enabled, say Y, otherwise say N.

          As a side note, saying Y here will automatically boost HZ to 1000
          so that the timer has a chance to clear the overflow counter. On
          slower systems (such as the SH-2 and SH-3) this will likely yield
          some performance issues. As such, the WDT should be avoided here
          unless it is absolutely necessary.

          To compile this driver as a module, choose M here: the
          module will be called shwdt.

# SPARC Architecture

# SPARC64 Architecture

config WATCHDOG_CP1XXX
        tristate "CP1XXX Hardware Watchdog support"
        depends on SPARC64 && PCI
        ---help---
          This is the driver for the hardware watchdog timers present on
          Sun Microsystems CompactPCI models CP1400 and CP1500.

          To compile this driver as a module, choose M here: the
          module will be called cpwatchdog.

          If you do not have a CompactPCI model CP1400 or CP1500, or
          another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
          you should say N to this option.

config WATCHDOG_RIO
        tristate "RIO Hardware Watchdog support"
        depends on SPARC64 && PCI
        help
          Say Y here to support the hardware watchdog capability on Sun RIO
          machines.  The watchdog timeout period is normally one minute but
          can be changed with a boot-time parameter.

# XTENSA Architecture

# Xen Architecture

config XEN_WDT
        tristate "Xen Watchdog support"
        depends on XEN
        help
          Say Y here to support the hypervisor watchdog capability provided
          by Xen 4.0 and newer.  The watchdog timeout period is normally one
          minute but can be changed with a boot-time parameter.

config UML_WATCHDOG
        tristate "UML watchdog"
        depends on UML

#
# ISA-based Watchdog Cards
#

comment "ISA-based Watchdog Cards"
        depends on ISA

config PCWATCHDOG
        tristate "Berkshire Products ISA-PC Watchdog"
        depends on ISA
        ---help---
          This is the driver for the Berkshire Products ISA-PC Watchdog card.
          This card simply watches your kernel to make sure it doesn't freeze,
          and if it does, it reboots your computer after a certain amount of
          time. This driver is like the WDT501 driver but for different
          hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
          watchdog cards can be ordered from <http://www.berkprod.com/>.

          To compile this driver as a module, choose M here: the
          module will be called pcwd.

          Most people will say N.

config MIXCOMWD
        tristate "Mixcom Watchdog"
        depends on ISA
        ---help---
          This is a driver for the Mixcom hardware watchdog cards.  This
          watchdog simply watches your kernel to make sure it doesn't freeze,
          and if it does, it reboots your computer after a certain amount of
          time.

          To compile this driver as a module, choose M here: the
          module will be called mixcomwd.

          Most people will say N.

config WDT
        tristate "WDT Watchdog timer"
        depends on ISA
        ---help---
          If you have a WDT500P or WDT501P watchdog board, say Y here,
          otherwise N. It is not possible to probe for this board, which means
          that you have to inform the kernel about the IO port and IRQ that
          is needed (you can do this via the io and irq parameters)

          To compile this driver as a module, choose M here: the
          module will be called wdt.

#
# PCI-based Watchdog Cards
#

comment "PCI-based Watchdog Cards"
        depends on PCI

config PCIPCWATCHDOG
        tristate "Berkshire Products PCI-PC Watchdog"
        depends on PCI
        ---help---
          This is the driver for the Berkshire Products PCI-PC Watchdog card.
          This card simply watches your kernel to make sure it doesn't freeze,
          and if it does, it reboots your computer after a certain amount of
          time. The card can also monitor the internal temperature of the PC.
          More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.

          To compile this driver as a module, choose M here: the
          module will be called pcwd_pci.

          Most people will say N.

config WDTPCI
        tristate "PCI-WDT500/501 Watchdog timer"
        depends on PCI
        ---help---
          If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.

          If you have a PCI-WDT501 watchdog board then you can enable the
          temperature sensor by setting the type parameter to 501.

          If you want to enable the Fan Tachometer on the PCI-WDT501, then you
          can do this via the tachometer parameter. Only do this if you have a
          fan tachometer actually set up.

          To compile this driver as a module, choose M here: the
          module will be called wdt_pci.

#
# USB-based Watchdog Cards
#

comment "USB-based Watchdog Cards"
        depends on USB

config USBPCWATCHDOG
        tristate "Berkshire Products USB-PC Watchdog"
        depends on USB
        ---help---
          This is the driver for the Berkshire Products USB-PC Watchdog card.
          This card simply watches your kernel to make sure it doesn't freeze,
          and if it does, it reboots your computer after a certain amount of
          time. The card can also monitor the internal temperature of the PC.
          More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.

          To compile this driver as a module, choose M here: the
          module will be called pcwd_usb.

          Most people will say N.

endif # WATCHDOG