drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Generic DSI Command Mode panel driver
   4  *
   5  * Copyright (C) 2013 Texas Instruments
   6  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
   7  */
   8
   9 /* #define DEBUG */
  10
  11 #include <linux/backlight.h>
  12 #include <linux/delay.h>
  13 #include <linux/err.h>
  14 #include <linux/fb.h>
  15 #include <linux/gpio/consumer.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/jiffies.h>
  18 #include <linux/module.h>
  19 #include <linux/platform_device.h>
  20 #include <linux/sched/signal.h>
  21 #include <linux/slab.h>
  22 #include <linux/workqueue.h>
  23 #include <linux/of_device.h>
  24
  25 #include <video/omapfb_dss.h>
  26 #include <video/mipi_display.h>
  27
  28 /* DSI Virtual channel. Hardcoded for now. */
  29 #define TCH 0
  30
  31 #define DCS_READ_NUM_ERRORS     0x05
  32 #define DCS_BRIGHTNESS          0x51
  33 #define DCS_CTRL_DISPLAY        0x53
  34 #define DCS_GET_ID1             0xda
  35 #define DCS_GET_ID2             0xdb
  36 #define DCS_GET_ID3             0xdc
  37
  38 struct panel_drv_data {
  39         struct omap_dss_device dssdev;
  40         struct omap_dss_device *in;
  41
  42         struct omap_video_timings timings;
  43
  44         struct platform_device *pdev;
  45
  46         struct mutex lock;
  47
  48         struct backlight_device *bldev;
  49
  50         unsigned long   hw_guard_end;   /* next value of jiffies when we can
  51                                          * issue the next sleep in/out command
  52                                          */
  53         unsigned long   hw_guard_wait;  /* max guard time in jiffies */
  54
  55         /* panel HW configuration from DT or platform data */
  56         struct gpio_desc *reset_gpio;
  57         struct gpio_desc *ext_te_gpio;
  58
  59         bool use_dsi_backlight;
  60
  61         struct omap_dsi_pin_config pin_config;
  62
  63         /* runtime variables */
  64         bool enabled;
  65
  66         bool te_enabled;
  67
  68         atomic_t do_update;
  69         int channel;
  70
  71         struct delayed_work te_timeout_work;
  72
  73         bool intro_printed;
  74
  75         bool ulps_enabled;
  76         unsigned ulps_timeout;
  77         struct delayed_work ulps_work;
  78 };
  79
  80 #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
  81
  82 static irqreturn_t dsicm_te_isr(int irq, void *data);
  83 static void dsicm_te_timeout_work_callback(struct work_struct *work);
  84 static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable);
  85
  86 static int dsicm_panel_reset(struct panel_drv_data *ddata);
  87
  88 static void dsicm_ulps_work(struct work_struct *work);
  89
  90 static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
  91 {
  92         ddata->hw_guard_wait = msecs_to_jiffies(guard_msec);
  93         ddata->hw_guard_end = jiffies + ddata->hw_guard_wait;
  94 }
  95
  96 static void hw_guard_wait(struct panel_drv_data *ddata)
  97 {
  98         unsigned long wait = ddata->hw_guard_end - jiffies;
  99
 100         if ((long)wait > 0 && time_before_eq(wait, ddata->hw_guard_wait)) {
 101                 set_current_state(TASK_UNINTERRUPTIBLE);
 102                 schedule_timeout(wait);
 103         }
 104 }
 105
 106 static int dsicm_dcs_read_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 *data)
 107 {
 108         struct omap_dss_device *in = ddata->in;
 109         int r;
 110         u8 buf[1];
 111
 112         r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd, buf, 1);
 113
 114         if (r < 0)
 115                 return r;
 116
 117         *data = buf[0];
 118
 119         return 0;
 120 }
 121
 122 static int dsicm_dcs_write_0(struct panel_drv_data *ddata, u8 dcs_cmd)
 123 {
 124         struct omap_dss_device *in = ddata->in;
 125         return in->ops.dsi->dcs_write(in, ddata->channel, &dcs_cmd, 1);
 126 }
 127
 128 static int dsicm_dcs_write_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 param)
 129 {
 130         struct omap_dss_device *in = ddata->in;
 131         u8 buf[2] = { dcs_cmd, param };
 132
 133         return in->ops.dsi->dcs_write(in, ddata->channel, buf, 2);
 134 }
 135
 136 static int dsicm_sleep_in(struct panel_drv_data *ddata)
 137
 138 {
 139         struct omap_dss_device *in = ddata->in;
 140         u8 cmd;
 141         int r;
 142
 143         hw_guard_wait(ddata);
 144
 145         cmd = MIPI_DCS_ENTER_SLEEP_MODE;
 146         r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, &cmd, 1);
 147         if (r)
 148                 return r;
 149
 150         hw_guard_start(ddata, 120);
 151
 152         usleep_range(5000, 10000);
 153
 154         return 0;
 155 }
 156
 157 static int dsicm_sleep_out(struct panel_drv_data *ddata)
 158 {
 159         int r;
 160
 161         hw_guard_wait(ddata);
 162
 163         r = dsicm_dcs_write_0(ddata, MIPI_DCS_EXIT_SLEEP_MODE);
 164         if (r)
 165                 return r;
 166
 167         hw_guard_start(ddata, 120);
 168
 169         usleep_range(5000, 10000);
 170
 171         return 0;
 172 }
 173
 174 static int dsicm_get_id(struct panel_drv_data *ddata, u8 *id1, u8 *id2, u8 *id3)
 175 {
 176         int r;
 177
 178         r = dsicm_dcs_read_1(ddata, DCS_GET_ID1, id1);
 179         if (r)
 180                 return r;
 181         r = dsicm_dcs_read_1(ddata, DCS_GET_ID2, id2);
 182         if (r)
 183                 return r;
 184         r = dsicm_dcs_read_1(ddata, DCS_GET_ID3, id3);
 185         if (r)
 186                 return r;
 187
 188         return 0;
 189 }
 190
 191 static int dsicm_set_update_window(struct panel_drv_data *ddata,
 192                 u16 x, u16 y, u16 w, u16 h)
 193 {
 194         struct omap_dss_device *in = ddata->in;
 195         int r;
 196         u16 x1 = x;
 197         u16 x2 = x + w - 1;
 198         u16 y1 = y;
 199         u16 y2 = y + h - 1;
 200
 201         u8 buf[5];
 202         buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS;
 203         buf[1] = (x1 >> 8) & 0xff;
 204         buf[2] = (x1 >> 0) & 0xff;
 205         buf[3] = (x2 >> 8) & 0xff;
 206         buf[4] = (x2 >> 0) & 0xff;
 207
 208         r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf));
 209         if (r)
 210                 return r;
 211
 212         buf[0] = MIPI_DCS_SET_PAGE_ADDRESS;
 213         buf[1] = (y1 >> 8) & 0xff;
 214         buf[2] = (y1 >> 0) & 0xff;
 215         buf[3] = (y2 >> 8) & 0xff;
 216         buf[4] = (y2 >> 0) & 0xff;
 217
 218         r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf));
 219         if (r)
 220                 return r;
 221
 222         in->ops.dsi->bta_sync(in, ddata->channel);
 223
 224         return r;
 225 }
 226
 227 static void dsicm_queue_ulps_work(struct panel_drv_data *ddata)
 228 {
 229         if (ddata->ulps_timeout > 0)
 230                 schedule_delayed_work(&ddata->ulps_work,
 231                                 msecs_to_jiffies(ddata->ulps_timeout));
 232 }
 233
 234 static void dsicm_cancel_ulps_work(struct panel_drv_data *ddata)
 235 {
 236         cancel_delayed_work(&ddata->ulps_work);
 237 }
 238
 239 static int dsicm_enter_ulps(struct panel_drv_data *ddata)
 240 {
 241         struct omap_dss_device *in = ddata->in;
 242         int r;
 243
 244         if (ddata->ulps_enabled)
 245                 return 0;
 246
 247         dsicm_cancel_ulps_work(ddata);
 248
 249         r = _dsicm_enable_te(ddata, false);
 250         if (r)
 251                 goto err;
 252
 253         if (ddata->ext_te_gpio)
 254                 disable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 255
 256         in->ops.dsi->disable(in, false, true);
 257
 258         ddata->ulps_enabled = true;
 259
 260         return 0;
 261
 262 err:
 263         dev_err(&ddata->pdev->dev, "enter ULPS failed");
 264         dsicm_panel_reset(ddata);
 265
 266         ddata->ulps_enabled = false;
 267
 268         dsicm_queue_ulps_work(ddata);
 269
 270         return r;
 271 }
 272
 273 static int dsicm_exit_ulps(struct panel_drv_data *ddata)
 274 {
 275         struct omap_dss_device *in = ddata->in;
 276         int r;
 277
 278         if (!ddata->ulps_enabled)
 279                 return 0;
 280
 281         r = in->ops.dsi->enable(in);
 282         if (r) {
 283                 dev_err(&ddata->pdev->dev, "failed to enable DSI\n");
 284                 goto err1;
 285         }
 286
 287         in->ops.dsi->enable_hs(in, ddata->channel, true);
 288
 289         r = _dsicm_enable_te(ddata, true);
 290         if (r) {
 291                 dev_err(&ddata->pdev->dev, "failed to re-enable TE");
 292                 goto err2;
 293         }
 294
 295         if (ddata->ext_te_gpio)
 296                 enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 297
 298         dsicm_queue_ulps_work(ddata);
 299
 300         ddata->ulps_enabled = false;
 301
 302         return 0;
 303
 304 err2:
 305         dev_err(&ddata->pdev->dev, "failed to exit ULPS");
 306
 307         r = dsicm_panel_reset(ddata);
 308         if (!r) {
 309                 if (ddata->ext_te_gpio)
 310                         enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 311                 ddata->ulps_enabled = false;
 312         }
 313 err1:
 314         dsicm_queue_ulps_work(ddata);
 315
 316         return r;
 317 }
 318
 319 static int dsicm_wake_up(struct panel_drv_data *ddata)
 320 {
 321         if (ddata->ulps_enabled)
 322                 return dsicm_exit_ulps(ddata);
 323
 324         dsicm_cancel_ulps_work(ddata);
 325         dsicm_queue_ulps_work(ddata);
 326         return 0;
 327 }
 328
 329 static int dsicm_bl_update_status(struct backlight_device *dev)
 330 {
 331         struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
 332         struct omap_dss_device *in = ddata->in;
 333         int r;
 334         int level = backlight_get_brightness(dev);
 335
 336         dev_dbg(&ddata->pdev->dev, "update brightness to %d\n", level);
 337
 338         mutex_lock(&ddata->lock);
 339
 340         if (ddata->enabled) {
 341                 in->ops.dsi->bus_lock(in);
 342
 343                 r = dsicm_wake_up(ddata);
 344                 if (!r)
 345                         r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, level);
 346
 347                 in->ops.dsi->bus_unlock(in);
 348         } else {
 349                 r = 0;
 350         }
 351
 352         mutex_unlock(&ddata->lock);
 353
 354         return r;
 355 }
 356
 357 static int dsicm_bl_get_intensity(struct backlight_device *dev)
 358 {
 359         if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
 360                         dev->props.power == FB_BLANK_UNBLANK)
 361                 return dev->props.brightness;
 362
 363         return 0;
 364 }
 365
 366 static const struct backlight_ops dsicm_bl_ops = {
 367         .get_brightness = dsicm_bl_get_intensity,
 368         .update_status  = dsicm_bl_update_status,
 369 };
 370
 371 static void dsicm_get_resolution(struct omap_dss_device *dssdev,
 372                 u16 *xres, u16 *yres)
 373 {
 374         *xres = dssdev->panel.timings.x_res;
 375         *yres = dssdev->panel.timings.y_res;
 376 }
 377
 378 static ssize_t dsicm_num_errors_show(struct device *dev,
 379                 struct device_attribute *attr, char *buf)
 380 {
 381         struct panel_drv_data *ddata = dev_get_drvdata(dev);
 382         struct omap_dss_device *in = ddata->in;
 383         u8 errors = 0;
 384         int r;
 385
 386         mutex_lock(&ddata->lock);
 387
 388         if (ddata->enabled) {
 389                 in->ops.dsi->bus_lock(in);
 390
 391                 r = dsicm_wake_up(ddata);
 392                 if (!r)
 393                         r = dsicm_dcs_read_1(ddata, DCS_READ_NUM_ERRORS,
 394                                         &errors);
 395
 396                 in->ops.dsi->bus_unlock(in);
 397         } else {
 398                 r = -ENODEV;
 399         }
 400
 401         mutex_unlock(&ddata->lock);
 402
 403         if (r)
 404                 return r;
 405
 406         return sysfs_emit(buf, "%d\n", errors);
 407 }
 408
 409 static ssize_t dsicm_hw_revision_show(struct device *dev,
 410                 struct device_attribute *attr, char *buf)
 411 {
 412         struct panel_drv_data *ddata = dev_get_drvdata(dev);
 413         struct omap_dss_device *in = ddata->in;
 414         u8 id1, id2, id3;
 415         int r;
 416
 417         mutex_lock(&ddata->lock);
 418
 419         if (ddata->enabled) {
 420                 in->ops.dsi->bus_lock(in);
 421
 422                 r = dsicm_wake_up(ddata);
 423                 if (!r)
 424                         r = dsicm_get_id(ddata, &id1, &id2, &id3);
 425
 426                 in->ops.dsi->bus_unlock(in);
 427         } else {
 428                 r = -ENODEV;
 429         }
 430
 431         mutex_unlock(&ddata->lock);
 432
 433         if (r)
 434                 return r;
 435
 436         return sysfs_emit(buf, "%02x.%02x.%02x\n", id1, id2, id3);
 437 }
 438
 439 static ssize_t dsicm_store_ulps(struct device *dev,
 440                 struct device_attribute *attr,
 441                 const char *buf, size_t count)
 442 {
 443         struct panel_drv_data *ddata = dev_get_drvdata(dev);
 444         struct omap_dss_device *in = ddata->in;
 445         unsigned long t;
 446         int r;
 447
 448         r = kstrtoul(buf, 0, &t);
 449         if (r)
 450                 return r;
 451
 452         mutex_lock(&ddata->lock);
 453
 454         if (ddata->enabled) {
 455                 in->ops.dsi->bus_lock(in);
 456
 457                 if (t)
 458                         r = dsicm_enter_ulps(ddata);
 459                 else
 460                         r = dsicm_wake_up(ddata);
 461
 462                 in->ops.dsi->bus_unlock(in);
 463         }
 464
 465         mutex_unlock(&ddata->lock);
 466
 467         if (r)
 468                 return r;
 469
 470         return count;
 471 }
 472
 473 static ssize_t dsicm_show_ulps(struct device *dev,
 474                 struct device_attribute *attr,
 475                 char *buf)
 476 {
 477         struct panel_drv_data *ddata = dev_get_drvdata(dev);
 478         unsigned t;
 479
 480         mutex_lock(&ddata->lock);
 481         t = ddata->ulps_enabled;
 482         mutex_unlock(&ddata->lock);
 483
 484         return sysfs_emit(buf, "%u\n", t);
 485 }
 486
 487 static ssize_t dsicm_store_ulps_timeout(struct device *dev,
 488                 struct device_attribute *attr,
 489                 const char *buf, size_t count)
 490 {
 491         struct panel_drv_data *ddata = dev_get_drvdata(dev);
 492         struct omap_dss_device *in = ddata->in;
 493         unsigned long t;
 494         int r;
 495
 496         r = kstrtoul(buf, 0, &t);
 497         if (r)
 498                 return r;
 499
 500         mutex_lock(&ddata->lock);
 501         ddata->ulps_timeout = t;
 502
 503         if (ddata->enabled) {
 504                 /* dsicm_wake_up will restart the timer */
 505                 in->ops.dsi->bus_lock(in);
 506                 r = dsicm_wake_up(ddata);
 507                 in->ops.dsi->bus_unlock(in);
 508         }
 509
 510         mutex_unlock(&ddata->lock);
 511
 512         if (r)
 513                 return r;
 514
 515         return count;
 516 }
 517
 518 static ssize_t dsicm_show_ulps_timeout(struct device *dev,
 519                 struct device_attribute *attr,
 520                 char *buf)
 521 {
 522         struct panel_drv_data *ddata = dev_get_drvdata(dev);
 523         unsigned t;
 524
 525         mutex_lock(&ddata->lock);
 526         t = ddata->ulps_timeout;
 527         mutex_unlock(&ddata->lock);
 528
 529         return sysfs_emit(buf, "%u\n", t);
 530 }
 531
 532 static DEVICE_ATTR(num_dsi_errors, S_IRUGO, dsicm_num_errors_show, NULL);
 533 static DEVICE_ATTR(hw_revision, S_IRUGO, dsicm_hw_revision_show, NULL);
 534 static DEVICE_ATTR(ulps, S_IRUGO | S_IWUSR,
 535                 dsicm_show_ulps, dsicm_store_ulps);
 536 static DEVICE_ATTR(ulps_timeout, S_IRUGO | S_IWUSR,
 537                 dsicm_show_ulps_timeout, dsicm_store_ulps_timeout);
 538
 539 static struct attribute *dsicm_attrs[] = {
 540         &dev_attr_num_dsi_errors.attr,
 541         &dev_attr_hw_revision.attr,
 542         &dev_attr_ulps.attr,
 543         &dev_attr_ulps_timeout.attr,
 544         NULL,
 545 };
 546
 547 static const struct attribute_group dsicm_attr_group = {
 548         .attrs = dsicm_attrs,
 549 };
 550
 551 static void dsicm_hw_reset(struct panel_drv_data *ddata)
 552 {
 553         /*
 554          * Note that we appear to activate the reset line here. However
 555          * existing DTSes specified incorrect polarity for it (active high),
 556          * so in fact this deasserts the reset line.
 557          */
 558         gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 559         udelay(10);
 560         /* reset the panel */
 561         gpiod_set_value_cansleep(ddata->reset_gpio, 0);
 562         /* keep reset asserted */
 563         udelay(10);
 564         /* release reset line */
 565         gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 566         /* wait after releasing reset */
 567         usleep_range(5000, 10000);
 568 }
 569
 570 static int dsicm_power_on(struct panel_drv_data *ddata)
 571 {
 572         struct omap_dss_device *in = ddata->in;
 573         u8 id1, id2, id3;
 574         int r;
 575         struct omap_dss_dsi_config dsi_config = {
 576                 .mode = OMAP_DSS_DSI_CMD_MODE,
 577                 .pixel_format = OMAP_DSS_DSI_FMT_RGB888,
 578                 .timings = &ddata->timings,
 579                 .hs_clk_min = 150000000,
 580                 .hs_clk_max = 300000000,
 581                 .lp_clk_min = 7000000,
 582                 .lp_clk_max = 10000000,
 583         };
 584
 585         if (ddata->pin_config.num_pins > 0) {
 586                 r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
 587                 if (r) {
 588                         dev_err(&ddata->pdev->dev,
 589                                 "failed to configure DSI pins\n");
 590                         goto err0;
 591                 }
 592         }
 593
 594         r = in->ops.dsi->set_config(in, &dsi_config);
 595         if (r) {
 596                 dev_err(&ddata->pdev->dev, "failed to configure DSI\n");
 597                 goto err0;
 598         }
 599
 600         r = in->ops.dsi->enable(in);
 601         if (r) {
 602                 dev_err(&ddata->pdev->dev, "failed to enable DSI\n");
 603                 goto err0;
 604         }
 605
 606         dsicm_hw_reset(ddata);
 607
 608         in->ops.dsi->enable_hs(in, ddata->channel, false);
 609
 610         r = dsicm_sleep_out(ddata);
 611         if (r)
 612                 goto err;
 613
 614         r = dsicm_get_id(ddata, &id1, &id2, &id3);
 615         if (r)
 616                 goto err;
 617
 618         r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, 0xff);
 619         if (r)
 620                 goto err;
 621
 622         r = dsicm_dcs_write_1(ddata, DCS_CTRL_DISPLAY,
 623                         (1<<2) | (1<<5));       /* BL | BCTRL */
 624         if (r)
 625                 goto err;
 626
 627         r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_PIXEL_FORMAT,
 628                 MIPI_DCS_PIXEL_FMT_24BIT);
 629         if (r)
 630                 goto err;
 631
 632         r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_ON);
 633         if (r)
 634                 goto err;
 635
 636         r = _dsicm_enable_te(ddata, ddata->te_enabled);
 637         if (r)
 638                 goto err;
 639
 640         r = in->ops.dsi->enable_video_output(in, ddata->channel);
 641         if (r)
 642                 goto err;
 643
 644         ddata->enabled = 1;
 645
 646         if (!ddata->intro_printed) {
 647                 dev_info(&ddata->pdev->dev, "panel revision %02x.%02x.%02x\n",
 648                         id1, id2, id3);
 649                 ddata->intro_printed = true;
 650         }
 651
 652         in->ops.dsi->enable_hs(in, ddata->channel, true);
 653
 654         return 0;
 655 err:
 656         dev_err(&ddata->pdev->dev, "error while enabling panel, issuing HW reset\n");
 657
 658         dsicm_hw_reset(ddata);
 659
 660         in->ops.dsi->disable(in, true, false);
 661 err0:
 662         return r;
 663 }
 664
 665 static void dsicm_power_off(struct panel_drv_data *ddata)
 666 {
 667         struct omap_dss_device *in = ddata->in;
 668         int r;
 669
 670         in->ops.dsi->disable_video_output(in, ddata->channel);
 671
 672         r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_OFF);
 673         if (!r)
 674                 r = dsicm_sleep_in(ddata);
 675
 676         if (r) {
 677                 dev_err(&ddata->pdev->dev,
 678                                 "error disabling panel, issuing HW reset\n");
 679                 dsicm_hw_reset(ddata);
 680         }
 681
 682         in->ops.dsi->disable(in, true, false);
 683
 684         ddata->enabled = 0;
 685 }
 686
 687 static int dsicm_panel_reset(struct panel_drv_data *ddata)
 688 {
 689         dev_err(&ddata->pdev->dev, "performing LCD reset\n");
 690
 691         dsicm_power_off(ddata);
 692         dsicm_hw_reset(ddata);
 693         return dsicm_power_on(ddata);
 694 }
 695
 696 static int dsicm_connect(struct omap_dss_device *dssdev)
 697 {
 698         struct panel_drv_data *ddata = to_panel_data(dssdev);
 699         struct omap_dss_device *in = ddata->in;
 700         struct device *dev = &ddata->pdev->dev;
 701         int r;
 702
 703         if (omapdss_device_is_connected(dssdev))
 704                 return 0;
 705
 706         r = in->ops.dsi->connect(in, dssdev);
 707         if (r) {
 708                 dev_err(dev, "Failed to connect to video source\n");
 709                 return r;
 710         }
 711
 712         r = in->ops.dsi->request_vc(ddata->in, &ddata->channel);
 713         if (r) {
 714                 dev_err(dev, "failed to get virtual channel\n");
 715                 goto err_req_vc;
 716         }
 717
 718         r = in->ops.dsi->set_vc_id(ddata->in, ddata->channel, TCH);
 719         if (r) {
 720                 dev_err(dev, "failed to set VC_ID\n");
 721                 goto err_vc_id;
 722         }
 723
 724         return 0;
 725
 726 err_vc_id:
 727         in->ops.dsi->release_vc(ddata->in, ddata->channel);
 728 err_req_vc:
 729         in->ops.dsi->disconnect(in, dssdev);
 730         return r;
 731 }
 732
 733 static void dsicm_disconnect(struct omap_dss_device *dssdev)
 734 {
 735         struct panel_drv_data *ddata = to_panel_data(dssdev);
 736         struct omap_dss_device *in = ddata->in;
 737
 738         if (!omapdss_device_is_connected(dssdev))
 739                 return;
 740
 741         in->ops.dsi->release_vc(in, ddata->channel);
 742         in->ops.dsi->disconnect(in, dssdev);
 743 }
 744
 745 static int dsicm_enable(struct omap_dss_device *dssdev)
 746 {
 747         struct panel_drv_data *ddata = to_panel_data(dssdev);
 748         struct omap_dss_device *in = ddata->in;
 749         int r;
 750
 751         dev_dbg(&ddata->pdev->dev, "enable\n");
 752
 753         mutex_lock(&ddata->lock);
 754
 755         if (!omapdss_device_is_connected(dssdev)) {
 756                 r = -ENODEV;
 757                 goto err;
 758         }
 759
 760         if (omapdss_device_is_enabled(dssdev)) {
 761                 r = 0;
 762                 goto err;
 763         }
 764
 765         in->ops.dsi->bus_lock(in);
 766
 767         r = dsicm_power_on(ddata);
 768
 769         in->ops.dsi->bus_unlock(in);
 770
 771         if (r)
 772                 goto err;
 773
 774         dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 775
 776         mutex_unlock(&ddata->lock);
 777
 778         return 0;
 779 err:
 780         dev_dbg(&ddata->pdev->dev, "enable failed\n");
 781         mutex_unlock(&ddata->lock);
 782         return r;
 783 }
 784
 785 static void dsicm_disable(struct omap_dss_device *dssdev)
 786 {
 787         struct panel_drv_data *ddata = to_panel_data(dssdev);
 788         struct omap_dss_device *in = ddata->in;
 789         int r;
 790
 791         dev_dbg(&ddata->pdev->dev, "disable\n");
 792
 793         mutex_lock(&ddata->lock);
 794
 795         dsicm_cancel_ulps_work(ddata);
 796
 797         in->ops.dsi->bus_lock(in);
 798
 799         if (omapdss_device_is_enabled(dssdev)) {
 800                 r = dsicm_wake_up(ddata);
 801                 if (!r)
 802                         dsicm_power_off(ddata);
 803         }
 804
 805         in->ops.dsi->bus_unlock(in);
 806
 807         dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 808
 809         mutex_unlock(&ddata->lock);
 810 }
 811
 812 static void dsicm_framedone_cb(int err, void *data)
 813 {
 814         struct panel_drv_data *ddata = data;
 815         struct omap_dss_device *in = ddata->in;
 816
 817         dev_dbg(&ddata->pdev->dev, "framedone, err %d\n", err);
 818         in->ops.dsi->bus_unlock(ddata->in);
 819 }
 820
 821 static irqreturn_t dsicm_te_isr(int irq, void *data)
 822 {
 823         struct panel_drv_data *ddata = data;
 824         struct omap_dss_device *in = ddata->in;
 825         int old;
 826         int r;
 827
 828         old = atomic_cmpxchg(&ddata->do_update, 1, 0);
 829
 830         if (old) {
 831                 cancel_delayed_work(&ddata->te_timeout_work);
 832
 833                 r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb,
 834                                 ddata);
 835                 if (r)
 836                         goto err;
 837         }
 838
 839         return IRQ_HANDLED;
 840 err:
 841         dev_err(&ddata->pdev->dev, "start update failed\n");
 842         in->ops.dsi->bus_unlock(in);
 843         return IRQ_HANDLED;
 844 }
 845
 846 static void dsicm_te_timeout_work_callback(struct work_struct *work)
 847 {
 848         struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
 849                                         te_timeout_work.work);
 850         struct omap_dss_device *in = ddata->in;
 851
 852         dev_err(&ddata->pdev->dev, "TE not received for 250ms!\n");
 853
 854         atomic_set(&ddata->do_update, 0);
 855         in->ops.dsi->bus_unlock(in);
 856 }
 857
 858 static int dsicm_update(struct omap_dss_device *dssdev,
 859                                     u16 x, u16 y, u16 w, u16 h)
 860 {
 861         struct panel_drv_data *ddata = to_panel_data(dssdev);
 862         struct omap_dss_device *in = ddata->in;
 863         int r;
 864
 865         dev_dbg(&ddata->pdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
 866
 867         mutex_lock(&ddata->lock);
 868         in->ops.dsi->bus_lock(in);
 869
 870         r = dsicm_wake_up(ddata);
 871         if (r)
 872                 goto err;
 873
 874         if (!ddata->enabled) {
 875                 r = 0;
 876                 goto err;
 877         }
 878
 879         /* XXX no need to send this every frame, but dsi break if not done */
 880         r = dsicm_set_update_window(ddata, 0, 0,
 881                         dssdev->panel.timings.x_res,
 882                         dssdev->panel.timings.y_res);
 883         if (r)
 884                 goto err;
 885
 886         if (ddata->te_enabled && ddata->ext_te_gpio) {
 887                 schedule_delayed_work(&ddata->te_timeout_work,
 888                                 msecs_to_jiffies(250));
 889                 atomic_set(&ddata->do_update, 1);
 890         } else {
 891                 r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb,
 892                                 ddata);
 893                 if (r)
 894                         goto err;
 895         }
 896
 897         /* note: no bus_unlock here. unlock is in framedone_cb */
 898         mutex_unlock(&ddata->lock);
 899         return 0;
 900 err:
 901         in->ops.dsi->bus_unlock(in);
 902         mutex_unlock(&ddata->lock);
 903         return r;
 904 }
 905
 906 static int dsicm_sync(struct omap_dss_device *dssdev)
 907 {
 908         struct panel_drv_data *ddata = to_panel_data(dssdev);
 909         struct omap_dss_device *in = ddata->in;
 910
 911         dev_dbg(&ddata->pdev->dev, "sync\n");
 912
 913         mutex_lock(&ddata->lock);
 914         in->ops.dsi->bus_lock(in);
 915         in->ops.dsi->bus_unlock(in);
 916         mutex_unlock(&ddata->lock);
 917
 918         dev_dbg(&ddata->pdev->dev, "sync done\n");
 919
 920         return 0;
 921 }
 922
 923 static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
 924 {
 925         struct omap_dss_device *in = ddata->in;
 926         int r;
 927
 928         if (enable)
 929                 r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_TEAR_ON, 0);
 930         else
 931                 r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF);
 932
 933         if (!ddata->ext_te_gpio)
 934                 in->ops.dsi->enable_te(in, enable);
 935
 936         /* possible panel bug */
 937         msleep(100);
 938
 939         return r;
 940 }
 941
 942 static int dsicm_enable_te(struct omap_dss_device *dssdev, bool enable)
 943 {
 944         struct panel_drv_data *ddata = to_panel_data(dssdev);
 945         struct omap_dss_device *in = ddata->in;
 946         int r;
 947
 948         mutex_lock(&ddata->lock);
 949
 950         if (ddata->te_enabled == enable)
 951                 goto end;
 952
 953         in->ops.dsi->bus_lock(in);
 954
 955         if (ddata->enabled) {
 956                 r = dsicm_wake_up(ddata);
 957                 if (r)
 958                         goto err;
 959
 960                 r = _dsicm_enable_te(ddata, enable);
 961                 if (r)
 962                         goto err;
 963         }
 964
 965         ddata->te_enabled = enable;
 966
 967         in->ops.dsi->bus_unlock(in);
 968 end:
 969         mutex_unlock(&ddata->lock);
 970
 971         return 0;
 972 err:
 973         in->ops.dsi->bus_unlock(in);
 974         mutex_unlock(&ddata->lock);
 975
 976         return r;
 977 }
 978
 979 static int dsicm_get_te(struct omap_dss_device *dssdev)
 980 {
 981         struct panel_drv_data *ddata = to_panel_data(dssdev);
 982         int r;
 983
 984         mutex_lock(&ddata->lock);
 985         r = ddata->te_enabled;
 986         mutex_unlock(&ddata->lock);
 987
 988         return r;
 989 }
 990
 991 static int dsicm_memory_read(struct omap_dss_device *dssdev,
 992                 void *buf, size_t size,
 993                 u16 x, u16 y, u16 w, u16 h)
 994 {
 995         struct panel_drv_data *ddata = to_panel_data(dssdev);
 996         struct omap_dss_device *in = ddata->in;
 997         int r;
 998         int first = 1;
 999         int plen;
1000         unsigned buf_used = 0;
1001
1002         if (size < w * h * 3)
1003                 return -ENOMEM;
1004
1005         mutex_lock(&ddata->lock);
1006
1007         if (!ddata->enabled) {
1008                 r = -ENODEV;
1009                 goto err1;
1010         }
1011
1012         size = min(w * h * 3,
1013                         dssdev->panel.timings.x_res *
1014                         dssdev->panel.timings.y_res * 3);
1015
1016         in->ops.dsi->bus_lock(in);
1017
1018         r = dsicm_wake_up(ddata);
1019         if (r)
1020                 goto err2;
1021
1022         /* plen 1 or 2 goes into short packet. until checksum error is fixed,
1023          * use short packets. plen 32 works, but bigger packets seem to cause
1024          * an error. */
1025         if (size % 2)
1026                 plen = 1;
1027         else
1028                 plen = 2;
1029
1030         dsicm_set_update_window(ddata, x, y, w, h);
1031
1032         r = in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, plen);
1033         if (r)
1034                 goto err2;
1035
1036         while (buf_used < size) {
1037                 u8 dcs_cmd = first ? 0x2e : 0x3e;
1038                 first = 0;
1039
1040                 r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd,
1041                                 buf + buf_used, size - buf_used);
1042
1043                 if (r < 0) {
1044                         dev_err(dssdev->dev, "read error\n");
1045                         goto err3;
1046                 }
1047
1048                 buf_used += r;
1049
1050                 if (r < plen) {
1051                         dev_err(&ddata->pdev->dev, "short read\n");
1052                         break;
1053                 }
1054
1055                 if (signal_pending(current)) {
1056                         dev_err(&ddata->pdev->dev, "signal pending, "
1057                                         "aborting memory read\n");
1058                         r = -ERESTARTSYS;
1059                         goto err3;
1060                 }
1061         }
1062
1063         r = buf_used;
1064
1065 err3:
1066         in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, 1);
1067 err2:
1068         in->ops.dsi->bus_unlock(in);
1069 err1:
1070         mutex_unlock(&ddata->lock);
1071         return r;
1072 }
1073
1074 static void dsicm_ulps_work(struct work_struct *work)
1075 {
1076         struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
1077                         ulps_work.work);
1078         struct omap_dss_device *dssdev = &ddata->dssdev;
1079         struct omap_dss_device *in = ddata->in;
1080
1081         mutex_lock(&ddata->lock);
1082
1083         if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE || !ddata->enabled) {
1084                 mutex_unlock(&ddata->lock);
1085                 return;
1086         }
1087
1088         in->ops.dsi->bus_lock(in);
1089
1090         dsicm_enter_ulps(ddata);
1091
1092         in->ops.dsi->bus_unlock(in);
1093         mutex_unlock(&ddata->lock);
1094 }
1095
1096 static struct omap_dss_driver dsicm_ops = {
1097         .connect        = dsicm_connect,
1098         .disconnect     = dsicm_disconnect,
1099
1100         .enable         = dsicm_enable,
1101         .disable        = dsicm_disable,
1102
1103         .update         = dsicm_update,
1104         .sync           = dsicm_sync,
1105
1106         .get_resolution = dsicm_get_resolution,
1107         .get_recommended_bpp = omapdss_default_get_recommended_bpp,
1108
1109         .enable_te      = dsicm_enable_te,
1110         .get_te         = dsicm_get_te,
1111
1112         .memory_read    = dsicm_memory_read,
1113 };
1114
1115 static int dsicm_probe(struct platform_device *pdev)
1116 {
1117         struct backlight_properties props;
1118         struct panel_drv_data *ddata;
1119         struct backlight_device *bldev = NULL;
1120         struct device *dev = &pdev->dev;
1121         struct omap_dss_device *dssdev;
1122         int r;
1123
1124         dev_dbg(dev, "probe\n");
1125
1126         if (!pdev->dev.of_node)
1127                 return -ENODEV;
1128
1129         ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
1130         if (!ddata)
1131                 return -ENOMEM;
1132
1133         platform_set_drvdata(pdev, ddata);
1134         ddata->pdev = pdev;
1135
1136         ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
1137         r = PTR_ERR_OR_ZERO(ddata->in);
1138         if (r) {
1139                 dev_err(&pdev->dev, "failed to find video source: %d\n", r);
1140                 return r;
1141         }
1142
1143         ddata->timings.x_res = 864;
1144         ddata->timings.y_res = 480;
1145         ddata->timings.pixelclock = 864 * 480 * 60;
1146
1147         dssdev = &ddata->dssdev;
1148         dssdev->dev = dev;
1149         dssdev->driver = &dsicm_ops;
1150         dssdev->panel.timings = ddata->timings;
1151         dssdev->type = OMAP_DISPLAY_TYPE_DSI;
1152         dssdev->owner = THIS_MODULE;
1153
1154         dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
1155         dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
1156                 OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
1157
1158         r = omapdss_register_display(dssdev);
1159         if (r) {
1160                 dev_err(dev, "Failed to register panel\n");
1161                 goto err_reg;
1162         }
1163
1164         mutex_init(&ddata->lock);
1165
1166         atomic_set(&ddata->do_update, 0);
1167
1168         ddata->reset_gpio = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
1169         r = PTR_ERR_OR_ZERO(ddata->reset_gpio);
1170         if (r) {
1171                 dev_err(&pdev->dev, "Failed to request reset gpio: %d\n", r);
1172                 return r;
1173         }
1174
1175         gpiod_set_consumer_name(ddata->reset_gpio, "taal rst");
1176
1177         ddata->ext_te_gpio = devm_gpiod_get_optional(&pdev->dev, "te",
1178                                                      GPIOD_IN);
1179         r = PTR_ERR_OR_ZERO(ddata->ext_te_gpio);
1180         if (r) {
1181                 dev_err(&pdev->dev, "Failed to request TE gpio: %d\n", r);
1182                 return r;
1183         }
1184
1185         if (ddata->ext_te_gpio) {
1186                 gpiod_set_consumer_name(ddata->ext_te_gpio, "taal irq");
1187
1188                 r = devm_request_irq(dev, gpiod_to_irq(ddata->ext_te_gpio),
1189                                 dsicm_te_isr,
1190                                 IRQF_TRIGGER_RISING,
1191                                 "taal vsync", ddata);
1192
1193                 if (r) {
1194                         dev_err(dev, "IRQ request failed\n");
1195                         return r;
1196                 }
1197
1198                 INIT_DEFERRABLE_WORK(&ddata->te_timeout_work,
1199                                         dsicm_te_timeout_work_callback);
1200
1201                 dev_dbg(dev, "Using GPIO TE\n");
1202         }
1203
1204         INIT_DELAYED_WORK(&ddata->ulps_work, dsicm_ulps_work);
1205
1206         dsicm_hw_reset(ddata);
1207
1208         if (ddata->use_dsi_backlight) {
1209                 memset(&props, 0, sizeof(struct backlight_properties));
1210                 props.max_brightness = 255;
1211
1212                 props.type = BACKLIGHT_RAW;
1213                 bldev = backlight_device_register(dev_name(dev),
1214                                 dev, ddata, &dsicm_bl_ops, &props);
1215                 if (IS_ERR(bldev)) {
1216                         r = PTR_ERR(bldev);
1217                         goto err_reg;
1218                 }
1219
1220                 ddata->bldev = bldev;
1221
1222                 bldev->props.fb_blank = FB_BLANK_UNBLANK;
1223                 bldev->props.power = FB_BLANK_UNBLANK;
1224                 bldev->props.brightness = 255;
1225
1226                 dsicm_bl_update_status(bldev);
1227         }
1228
1229         r = sysfs_create_group(&dev->kobj, &dsicm_attr_group);
1230         if (r) {
1231                 dev_err(dev, "failed to create sysfs files\n");
1232                 goto err_sysfs_create;
1233         }
1234
1235         return 0;
1236
1237 err_sysfs_create:
1238         if (bldev != NULL)
1239                 backlight_device_unregister(bldev);
1240 err_reg:
1241         return r;
1242 }
1243
1244 static int __exit dsicm_remove(struct platform_device *pdev)
1245 {
1246         struct panel_drv_data *ddata = platform_get_drvdata(pdev);
1247         struct omap_dss_device *dssdev = &ddata->dssdev;
1248         struct backlight_device *bldev;
1249
1250         dev_dbg(&pdev->dev, "remove\n");
1251
1252         omapdss_unregister_display(dssdev);
1253
1254         dsicm_disable(dssdev);
1255         dsicm_disconnect(dssdev);
1256
1257         sysfs_remove_group(&pdev->dev.kobj, &dsicm_attr_group);
1258
1259         bldev = ddata->bldev;
1260         if (bldev != NULL) {
1261                 bldev->props.power = FB_BLANK_POWERDOWN;
1262                 dsicm_bl_update_status(bldev);
1263                 backlight_device_unregister(bldev);
1264         }
1265
1266         omap_dss_put_device(ddata->in);
1267
1268         dsicm_cancel_ulps_work(ddata);
1269
1270         /* reset, to be sure that the panel is in a valid state */
1271         dsicm_hw_reset(ddata);
1272
1273         return 0;
1274 }
1275
1276 static const struct of_device_id dsicm_of_match[] = {
1277         { .compatible = "omapdss,panel-dsi-cm", },
1278         {},
1279 };
1280
1281 MODULE_DEVICE_TABLE(of, dsicm_of_match);
1282
1283 static struct platform_driver dsicm_driver = {
1284         .probe = dsicm_probe,
1285         .remove = __exit_p(dsicm_remove),
1286         .driver = {
1287                 .name = "panel-dsi-cm",
1288                 .of_match_table = dsicm_of_match,
1289                 .suppress_bind_attrs = true,
1290         },
1291 };
1292
1293 module_platform_driver(dsicm_driver);
1294
1295 MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
1296 MODULE_DESCRIPTION("Generic DSI Command Mode Panel Driver");
1297 MODULE_LICENSE("GPL");