drivers/video/backlight/rt4831-backlight.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 #include <dt-bindings/leds/rt4831-backlight.h>
   4 #include <linux/backlight.h>
   5 #include <linux/bitops.h>
   6 #include <linux/kernel.h>
   7 #include <linux/module.h>
   8 #include <linux/platform_device.h>
   9 #include <linux/property.h>
  10 #include <linux/regmap.h>
  11
  12 #define RT4831_REG_BLCFG        0x02
  13 #define RT4831_REG_BLDIML       0x04
  14 #define RT4831_REG_ENABLE       0x08
  15 #define RT4831_REG_BLOPT2       0x11
  16
  17 #define RT4831_BLMAX_BRIGHTNESS 2048
  18
  19 #define RT4831_BLOVP_MASK       GENMASK(7, 5)
  20 #define RT4831_BLOVP_SHIFT      5
  21 #define RT4831_BLPWMEN_MASK     BIT(0)
  22 #define RT4831_BLEN_MASK        BIT(4)
  23 #define RT4831_BLCH_MASK        GENMASK(3, 0)
  24 #define RT4831_BLDIML_MASK      GENMASK(2, 0)
  25 #define RT4831_BLDIMH_MASK      GENMASK(10, 3)
  26 #define RT4831_BLDIMH_SHIFT     3
  27 #define RT4831_BLOCP_MASK       GENMASK(1, 0)
  28
  29 #define RT4831_BLOCP_MINUA      900000
  30 #define RT4831_BLOCP_MAXUA      1800000
  31 #define RT4831_BLOCP_STEPUA     300000
  32
  33 struct rt4831_priv {
  34         struct device *dev;
  35         struct regmap *regmap;
  36         struct backlight_device *bl;
  37 };
  38
  39 static int rt4831_bl_update_status(struct backlight_device *bl_dev)
  40 {
  41         struct rt4831_priv *priv = bl_get_data(bl_dev);
  42         int brightness = backlight_get_brightness(bl_dev);
  43         unsigned int enable = brightness ? RT4831_BLEN_MASK : 0;
  44         u8 v[2];
  45         int ret;
  46
  47         if (brightness) {
  48                 v[0] = (brightness - 1) & RT4831_BLDIML_MASK;
  49                 v[1] = ((brightness - 1) & RT4831_BLDIMH_MASK) >> RT4831_BLDIMH_SHIFT;
  50
  51                 ret = regmap_raw_write(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v));
  52                 if (ret)
  53                         return ret;
  54         }
  55
  56         return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLEN_MASK, enable);
  57
  58 }
  59
  60 static int rt4831_bl_get_brightness(struct backlight_device *bl_dev)
  61 {
  62         struct rt4831_priv *priv = bl_get_data(bl_dev);
  63         unsigned int val;
  64         u8 v[2];
  65         int ret;
  66
  67         ret = regmap_read(priv->regmap, RT4831_REG_ENABLE, &val);
  68         if (ret)
  69                 return ret;
  70
  71         if (!(val & RT4831_BLEN_MASK))
  72                 return 0;
  73
  74         ret = regmap_raw_read(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v));
  75         if (ret)
  76                 return ret;
  77
  78         ret = (v[1] << RT4831_BLDIMH_SHIFT) + (v[0] & RT4831_BLDIML_MASK) + 1;
  79
  80         return ret;
  81 }
  82
  83 static const struct backlight_ops rt4831_bl_ops = {
  84         .options = BL_CORE_SUSPENDRESUME,
  85         .update_status = rt4831_bl_update_status,
  86         .get_brightness = rt4831_bl_get_brightness,
  87 };
  88
  89 static int rt4831_parse_backlight_properties(struct rt4831_priv *priv,
  90                                              struct backlight_properties *bl_props)
  91 {
  92         struct device *dev = priv->dev;
  93         u8 propval;
  94         u32 brightness, ocp_uA;
  95         unsigned int val = 0;
  96         int ret;
  97
  98         /* common properties */
  99         ret = device_property_read_u32(dev, "max-brightness", &brightness);
 100         if (ret)
 101                 brightness = RT4831_BLMAX_BRIGHTNESS;
 102
 103         bl_props->max_brightness = min_t(u32, brightness, RT4831_BLMAX_BRIGHTNESS);
 104
 105         ret = device_property_read_u32(dev, "default-brightness", &brightness);
 106         if (ret)
 107                 brightness = bl_props->max_brightness;
 108
 109         bl_props->brightness = min_t(u32, brightness, bl_props->max_brightness);
 110
 111         /* vendor properties */
 112         if (device_property_read_bool(dev, "richtek,pwm-enable"))
 113                 val = RT4831_BLPWMEN_MASK;
 114
 115         ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLPWMEN_MASK, val);
 116         if (ret)
 117                 return ret;
 118
 119         ret = device_property_read_u8(dev, "richtek,bled-ovp-sel", &propval);
 120         if (ret)
 121                 propval = RT4831_BLOVPLVL_21V;
 122
 123         propval = min_t(u8, propval, RT4831_BLOVPLVL_29V);
 124         ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLOVP_MASK,
 125                                  propval << RT4831_BLOVP_SHIFT);
 126         if (ret)
 127                 return ret;
 128
 129         /*
 130          * This OCP level is used to protect and limit the inductor current.
 131          * If inductor peak current reach the level, low-side MOSFET will be
 132          * turned off. Meanwhile, the output channel current may be limited.
 133          * To match the configured channel current, the inductor chosen must
 134          * be higher than the OCP level.
 135          *
 136          * Not like the OVP level, the default 21V can be used in the most
 137          * application. But if the chosen OCP level is smaller than needed,
 138          * it will also affect the backlight channel output current to be
 139          * smaller than the register setting.
 140          */
 141         ret = device_property_read_u32(dev, "richtek,bled-ocp-microamp",
 142                                        &ocp_uA);
 143         if (!ret) {
 144                 ocp_uA = clamp_val(ocp_uA, RT4831_BLOCP_MINUA,
 145                                    RT4831_BLOCP_MAXUA);
 146                 val = DIV_ROUND_UP(ocp_uA - RT4831_BLOCP_MINUA,
 147                                    RT4831_BLOCP_STEPUA);
 148                 ret = regmap_update_bits(priv->regmap, RT4831_REG_BLOPT2,
 149                                          RT4831_BLOCP_MASK, val);
 150                 if (ret)
 151                         return ret;
 152         }
 153
 154         ret = device_property_read_u8(dev, "richtek,channel-use", &propval);
 155         if (ret) {
 156                 dev_err(dev, "richtek,channel-use DT property missing\n");
 157                 return ret;
 158         }
 159
 160         if (!(propval & RT4831_BLCH_MASK)) {
 161                 dev_err(dev, "No channel specified\n");
 162                 return -EINVAL;
 163         }
 164
 165         return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLCH_MASK, propval);
 166 }
 167
 168 static int rt4831_bl_probe(struct platform_device *pdev)
 169 {
 170         struct rt4831_priv *priv;
 171         struct backlight_properties bl_props = { .type = BACKLIGHT_RAW,
 172                                                  .scale = BACKLIGHT_SCALE_LINEAR };
 173         int ret;
 174
 175         priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 176         if (!priv)
 177                 return -ENOMEM;
 178
 179         priv->dev = &pdev->dev;
 180
 181         priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 182         if (!priv->regmap) {
 183                 dev_err(&pdev->dev, "Failed to init regmap\n");
 184                 return -ENODEV;
 185         }
 186
 187         ret = rt4831_parse_backlight_properties(priv, &bl_props);
 188         if (ret) {
 189                 dev_err(&pdev->dev, "Failed to parse backlight properties\n");
 190                 return ret;
 191         }
 192
 193         priv->bl = devm_backlight_device_register(&pdev->dev, pdev->name, &pdev->dev, priv,
 194                                                   &rt4831_bl_ops, &bl_props);
 195         if (IS_ERR(priv->bl)) {
 196                 dev_err(&pdev->dev, "Failed to register backlight\n");
 197                 return PTR_ERR(priv->bl);
 198         }
 199
 200         backlight_update_status(priv->bl);
 201         platform_set_drvdata(pdev, priv);
 202
 203         return 0;
 204 }
 205
 206 static void rt4831_bl_remove(struct platform_device *pdev)
 207 {
 208         struct rt4831_priv *priv = platform_get_drvdata(pdev);
 209         struct backlight_device *bl_dev = priv->bl;
 210
 211         bl_dev->props.brightness = 0;
 212         backlight_update_status(priv->bl);
 213 }
 214
 215 static const struct of_device_id __maybe_unused rt4831_bl_of_match[] = {
 216         { .compatible = "richtek,rt4831-backlight", },
 217         {}
 218 };
 219 MODULE_DEVICE_TABLE(of, rt4831_bl_of_match);
 220
 221 static struct platform_driver rt4831_bl_driver = {
 222         .driver = {
 223                 .name = "rt4831-backlight",
 224                 .of_match_table = rt4831_bl_of_match,
 225         },
 226         .probe = rt4831_bl_probe,
 227         .remove_new = rt4831_bl_remove,
 228 };
 229 module_platform_driver(rt4831_bl_driver);
 230
 231 MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
 232 MODULE_LICENSE("GPL v2");