Linux 6.10-rc6
[linux-2.6-block.git] / drivers / usb / host / ohci-nxp.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * driver for NXP USB Host devices
4  *
5  * Currently supported OHCI host devices:
6  * - NXP LPC32xx
7  *
8  * Authors: Dmitry Chigirev <source@mvista.com>
9  *          Vitaly Wool <vitalywool@gmail.com>
10  *
11  * register initialization is based on code examples provided by Philips
12  * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
13  *
14  * NOTE: This driver does not have suspend/resume functionality
15  * This driver is intended for engineering development purposes only
16  *
17  * 2005-2006 (c) MontaVista Software, Inc.
18  */
19 #include <linux/clk.h>
20 #include <linux/dma-mapping.h>
21 #include <linux/io.h>
22 #include <linux/i2c.h>
23 #include <linux/module.h>
24 #include <linux/of.h>
25 #include <linux/platform_device.h>
26 #include <linux/usb/isp1301.h>
27 #include <linux/usb.h>
28 #include <linux/usb/hcd.h>
29
30 #include "ohci.h"
31
32 #define USB_CONFIG_BASE         0x31020000
33
34 /* USB_OTG_STAT_CONTROL bit defines */
35 #define TRANSPARENT_I2C_EN      (1 << 7)
36 #define HOST_EN                 (1 << 0)
37
38 /* On LPC32xx, those are undefined */
39 #ifndef start_int_set_falling_edge
40 #define start_int_set_falling_edge(irq)
41 #define start_int_set_rising_edge(irq)
42 #define start_int_ack(irq)
43 #define start_int_mask(irq)
44 #define start_int_umask(irq)
45 #endif
46
47 #define DRIVER_DESC "OHCI NXP driver"
48
49 static const char hcd_name[] = "ohci-nxp";
50 static struct hc_driver __read_mostly ohci_nxp_hc_driver;
51
52 static struct i2c_client *isp1301_i2c_client;
53
54 static struct clk *usb_host_clk;
55
56 static void isp1301_configure_lpc32xx(void)
57 {
58         /* LPC32XX only supports DAT_SE0 USB mode */
59         /* This sequence is important */
60
61         /* Disable transparent UART mode first */
62         i2c_smbus_write_byte_data(isp1301_i2c_client,
63                 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
64                 MC1_UART_EN);
65         i2c_smbus_write_byte_data(isp1301_i2c_client,
66                 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
67                 ~MC1_SPEED_REG);
68         i2c_smbus_write_byte_data(isp1301_i2c_client,
69                                   ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
70         i2c_smbus_write_byte_data(isp1301_i2c_client,
71                   (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
72                   ~0);
73         i2c_smbus_write_byte_data(isp1301_i2c_client,
74                 ISP1301_I2C_MODE_CONTROL_2,
75                 (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
76         i2c_smbus_write_byte_data(isp1301_i2c_client,
77                 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
78         i2c_smbus_write_byte_data(isp1301_i2c_client,
79                 ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
80         i2c_smbus_write_byte_data(isp1301_i2c_client,
81                 ISP1301_I2C_OTG_CONTROL_1,
82                 (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
83         i2c_smbus_write_byte_data(isp1301_i2c_client,
84                 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
85                 (OTG1_DM_PULLUP | OTG1_DP_PULLUP));
86         i2c_smbus_write_byte_data(isp1301_i2c_client,
87                 ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
88         i2c_smbus_write_byte_data(isp1301_i2c_client,
89                 ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
90                 ~0);
91         i2c_smbus_write_byte_data(isp1301_i2c_client,
92                 ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
93
94         printk(KERN_INFO "ISP1301 Vendor ID  : 0x%04x\n",
95               i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
96         printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
97               i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
98         printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
99               i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
100 }
101
102 static void isp1301_configure(void)
103 {
104         isp1301_configure_lpc32xx();
105 }
106
107 static inline void isp1301_vbus_on(void)
108 {
109         i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
110                                   OTG1_VBUS_DRV);
111 }
112
113 static inline void isp1301_vbus_off(void)
114 {
115         i2c_smbus_write_byte_data(isp1301_i2c_client,
116                 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
117                 OTG1_VBUS_DRV);
118 }
119
120 static void ohci_nxp_start_hc(void)
121 {
122         void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
123         unsigned long tmp;
124
125         if (WARN_ON(!usb_otg_stat_control))
126                 return;
127
128         tmp = __raw_readl(usb_otg_stat_control) | HOST_EN;
129
130         __raw_writel(tmp, usb_otg_stat_control);
131         isp1301_vbus_on();
132
133         iounmap(usb_otg_stat_control);
134 }
135
136 static void ohci_nxp_stop_hc(void)
137 {
138         void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
139         unsigned long tmp;
140
141         if (WARN_ON(!usb_otg_stat_control))
142                 return;
143
144         isp1301_vbus_off();
145         tmp = __raw_readl(usb_otg_stat_control) & ~HOST_EN;
146         __raw_writel(tmp, usb_otg_stat_control);
147
148         iounmap(usb_otg_stat_control);
149 }
150
151 static int ohci_hcd_nxp_probe(struct platform_device *pdev)
152 {
153         struct usb_hcd *hcd = NULL;
154         const struct hc_driver *driver = &ohci_nxp_hc_driver;
155         struct resource *res;
156         int ret = 0, irq;
157         struct device_node *isp1301_node;
158
159         if (pdev->dev.of_node) {
160                 isp1301_node = of_parse_phandle(pdev->dev.of_node,
161                                                 "transceiver", 0);
162         } else {
163                 isp1301_node = NULL;
164         }
165
166         isp1301_i2c_client = isp1301_get_client(isp1301_node);
167         of_node_put(isp1301_node);
168         if (!isp1301_i2c_client)
169                 return -EPROBE_DEFER;
170
171         ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
172         if (ret)
173                 goto fail_disable;
174
175         dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
176         if (usb_disabled()) {
177                 dev_err(&pdev->dev, "USB is disabled\n");
178                 ret = -ENODEV;
179                 goto fail_disable;
180         }
181
182         /* Enable USB host clock */
183         usb_host_clk = devm_clk_get(&pdev->dev, NULL);
184         if (IS_ERR(usb_host_clk)) {
185                 dev_err(&pdev->dev, "failed to acquire USB OHCI clock\n");
186                 ret = PTR_ERR(usb_host_clk);
187                 goto fail_disable;
188         }
189
190         ret = clk_prepare_enable(usb_host_clk);
191         if (ret < 0) {
192                 dev_err(&pdev->dev, "failed to start USB OHCI clock\n");
193                 goto fail_disable;
194         }
195
196         isp1301_configure();
197
198         hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
199         if (!hcd) {
200                 dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
201                 ret = -ENOMEM;
202                 goto fail_hcd;
203         }
204
205         hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
206         if (IS_ERR(hcd->regs)) {
207                 ret = PTR_ERR(hcd->regs);
208                 goto fail_resource;
209         }
210         hcd->rsrc_start = res->start;
211         hcd->rsrc_len = resource_size(res);
212
213         irq = platform_get_irq(pdev, 0);
214         if (irq < 0) {
215                 ret = -ENXIO;
216                 goto fail_resource;
217         }
218
219         ohci_nxp_start_hc();
220         platform_set_drvdata(pdev, hcd);
221
222         dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
223         ret = usb_add_hcd(hcd, irq, 0);
224         if (ret == 0) {
225                 device_wakeup_enable(hcd->self.controller);
226                 return ret;
227         }
228
229         ohci_nxp_stop_hc();
230 fail_resource:
231         usb_put_hcd(hcd);
232 fail_hcd:
233         clk_disable_unprepare(usb_host_clk);
234 fail_disable:
235         isp1301_i2c_client = NULL;
236         return ret;
237 }
238
239 static void ohci_hcd_nxp_remove(struct platform_device *pdev)
240 {
241         struct usb_hcd *hcd = platform_get_drvdata(pdev);
242
243         usb_remove_hcd(hcd);
244         ohci_nxp_stop_hc();
245         usb_put_hcd(hcd);
246         clk_disable_unprepare(usb_host_clk);
247         isp1301_i2c_client = NULL;
248 }
249
250 /* work with hotplug and coldplug */
251 MODULE_ALIAS("platform:usb-ohci");
252
253 #ifdef CONFIG_OF
254 static const struct of_device_id ohci_hcd_nxp_match[] = {
255         { .compatible = "nxp,ohci-nxp" },
256         {},
257 };
258 MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match);
259 #endif
260
261 static struct platform_driver ohci_hcd_nxp_driver = {
262         .driver = {
263                 .name = "usb-ohci",
264                 .of_match_table = of_match_ptr(ohci_hcd_nxp_match),
265         },
266         .probe = ohci_hcd_nxp_probe,
267         .remove_new = ohci_hcd_nxp_remove,
268 };
269
270 static int __init ohci_nxp_init(void)
271 {
272         if (usb_disabled())
273                 return -ENODEV;
274
275         ohci_init_driver(&ohci_nxp_hc_driver, NULL);
276         return platform_driver_register(&ohci_hcd_nxp_driver);
277 }
278 module_init(ohci_nxp_init);
279
280 static void __exit ohci_nxp_cleanup(void)
281 {
282         platform_driver_unregister(&ohci_hcd_nxp_driver);
283 }
284 module_exit(ohci_nxp_cleanup);
285
286 MODULE_DESCRIPTION(DRIVER_DESC);
287 MODULE_LICENSE("GPL v2");