Merge tag 'v4.10-rc1' into docs-next
[linux-block.git] / drivers / usb / dwc2 / platform.c
1 /*
2  * platform.c - DesignWare HS OTG Controller platform driver
3  *
4  * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions, and the following disclaimer,
11  *    without modification.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. The names of the above-listed copyright holders may not be used
16  *    to endorse or promote products derived from this software without
17  *    specific prior written permission.
18  *
19  * ALTERNATIVELY, this software may be distributed under the terms of the
20  * GNU General Public License ("GPL") as published by the Free Software
21  * Foundation; either version 2 of the License, or (at your option) any
22  * later version.
23  *
24  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
25  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
26  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
27  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
28  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
29  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
30  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
31  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
32  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
33  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
34  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35  */
36
37 #include <linux/kernel.h>
38 #include <linux/module.h>
39 #include <linux/slab.h>
40 #include <linux/clk.h>
41 #include <linux/device.h>
42 #include <linux/dma-mapping.h>
43 #include <linux/of_device.h>
44 #include <linux/mutex.h>
45 #include <linux/platform_device.h>
46 #include <linux/phy/phy.h>
47 #include <linux/platform_data/s3c-hsotg.h>
48 #include <linux/reset.h>
49
50 #include <linux/usb/of.h>
51
52 #include "core.h"
53 #include "hcd.h"
54 #include "debug.h"
55
56 static const char dwc2_driver_name[] = "dwc2";
57
58 /*
59  * Check the dr_mode against the module configuration and hardware
60  * capabilities.
61  *
62  * The hardware, module, and dr_mode, can each be set to host, device,
63  * or otg. Check that all these values are compatible and adjust the
64  * value of dr_mode if possible.
65  *
66  *                      actual
67  *    HW  MOD dr_mode   dr_mode
68  *  ------------------------------
69  *   HST  HST  any    :  HST
70  *   HST  DEV  any    :  ---
71  *   HST  OTG  any    :  HST
72  *
73  *   DEV  HST  any    :  ---
74  *   DEV  DEV  any    :  DEV
75  *   DEV  OTG  any    :  DEV
76  *
77  *   OTG  HST  any    :  HST
78  *   OTG  DEV  any    :  DEV
79  *   OTG  OTG  any    :  dr_mode
80  */
81 static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
82 {
83         enum usb_dr_mode mode;
84
85         hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
86         if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
87                 hsotg->dr_mode = USB_DR_MODE_OTG;
88
89         mode = hsotg->dr_mode;
90
91         if (dwc2_hw_is_device(hsotg)) {
92                 if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
93                         dev_err(hsotg->dev,
94                                 "Controller does not support host mode.\n");
95                         return -EINVAL;
96                 }
97                 mode = USB_DR_MODE_PERIPHERAL;
98         } else if (dwc2_hw_is_host(hsotg)) {
99                 if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
100                         dev_err(hsotg->dev,
101                                 "Controller does not support device mode.\n");
102                         return -EINVAL;
103                 }
104                 mode = USB_DR_MODE_HOST;
105         } else {
106                 if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
107                         mode = USB_DR_MODE_HOST;
108                 else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
109                         mode = USB_DR_MODE_PERIPHERAL;
110         }
111
112         if (mode != hsotg->dr_mode) {
113                 dev_warn(hsotg->dev,
114                         "Configuration mismatch. dr_mode forced to %s\n",
115                         mode == USB_DR_MODE_HOST ? "host" : "device");
116
117                 hsotg->dr_mode = mode;
118         }
119
120         return 0;
121 }
122
123 static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
124 {
125         struct platform_device *pdev = to_platform_device(hsotg->dev);
126         int ret;
127
128         ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
129                                     hsotg->supplies);
130         if (ret)
131                 return ret;
132
133         if (hsotg->clk) {
134                 ret = clk_prepare_enable(hsotg->clk);
135                 if (ret)
136                         return ret;
137         }
138
139         if (hsotg->uphy)
140                 ret = usb_phy_init(hsotg->uphy);
141         else if (hsotg->plat && hsotg->plat->phy_init)
142                 ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
143         else {
144                 ret = phy_power_on(hsotg->phy);
145                 if (ret == 0)
146                         ret = phy_init(hsotg->phy);
147         }
148
149         return ret;
150 }
151
152 /**
153  * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
154  * @hsotg: The driver state
155  *
156  * A wrapper for platform code responsible for controlling
157  * low-level USB platform resources (phy, clock, regulators)
158  */
159 int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
160 {
161         int ret = __dwc2_lowlevel_hw_enable(hsotg);
162
163         if (ret == 0)
164                 hsotg->ll_hw_enabled = true;
165         return ret;
166 }
167
168 static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
169 {
170         struct platform_device *pdev = to_platform_device(hsotg->dev);
171         int ret = 0;
172
173         if (hsotg->uphy)
174                 usb_phy_shutdown(hsotg->uphy);
175         else if (hsotg->plat && hsotg->plat->phy_exit)
176                 ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
177         else {
178                 ret = phy_exit(hsotg->phy);
179                 if (ret == 0)
180                         ret = phy_power_off(hsotg->phy);
181         }
182         if (ret)
183                 return ret;
184
185         if (hsotg->clk)
186                 clk_disable_unprepare(hsotg->clk);
187
188         ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
189                                      hsotg->supplies);
190
191         return ret;
192 }
193
194 /**
195  * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
196  * @hsotg: The driver state
197  *
198  * A wrapper for platform code responsible for controlling
199  * low-level USB platform resources (phy, clock, regulators)
200  */
201 int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
202 {
203         int ret = __dwc2_lowlevel_hw_disable(hsotg);
204
205         if (ret == 0)
206                 hsotg->ll_hw_enabled = false;
207         return ret;
208 }
209
210 static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
211 {
212         int i, ret;
213
214         hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
215         if (IS_ERR(hsotg->reset)) {
216                 ret = PTR_ERR(hsotg->reset);
217                 switch (ret) {
218                 case -ENOENT:
219                 case -ENOTSUPP:
220                         hsotg->reset = NULL;
221                         break;
222                 default:
223                         dev_err(hsotg->dev, "error getting reset control %d\n",
224                                 ret);
225                         return ret;
226                 }
227         }
228
229         if (hsotg->reset)
230                 reset_control_deassert(hsotg->reset);
231
232         /* Set default UTMI width */
233         hsotg->phyif = GUSBCFG_PHYIF16;
234
235         /*
236          * Attempt to find a generic PHY, then look for an old style
237          * USB PHY and then fall back to pdata
238          */
239         hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
240         if (IS_ERR(hsotg->phy)) {
241                 ret = PTR_ERR(hsotg->phy);
242                 switch (ret) {
243                 case -ENODEV:
244                 case -ENOSYS:
245                         hsotg->phy = NULL;
246                         break;
247                 case -EPROBE_DEFER:
248                         return ret;
249                 default:
250                         dev_err(hsotg->dev, "error getting phy %d\n", ret);
251                         return ret;
252                 }
253         }
254
255         if (!hsotg->phy) {
256                 hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
257                 if (IS_ERR(hsotg->uphy)) {
258                         ret = PTR_ERR(hsotg->uphy);
259                         switch (ret) {
260                         case -ENODEV:
261                         case -ENXIO:
262                                 hsotg->uphy = NULL;
263                                 break;
264                         case -EPROBE_DEFER:
265                                 return ret;
266                         default:
267                                 dev_err(hsotg->dev, "error getting usb phy %d\n",
268                                         ret);
269                                 return ret;
270                         }
271                 }
272         }
273
274         hsotg->plat = dev_get_platdata(hsotg->dev);
275
276         if (hsotg->phy) {
277                 /*
278                  * If using the generic PHY framework, check if the PHY bus
279                  * width is 8-bit and set the phyif appropriately.
280                  */
281                 if (phy_get_bus_width(hsotg->phy) == 8)
282                         hsotg->phyif = GUSBCFG_PHYIF8;
283         }
284
285         /* Clock */
286         hsotg->clk = devm_clk_get(hsotg->dev, "otg");
287         if (IS_ERR(hsotg->clk)) {
288                 hsotg->clk = NULL;
289                 dev_dbg(hsotg->dev, "cannot get otg clock\n");
290         }
291
292         /* Regulators */
293         for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
294                 hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
295
296         ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
297                                       hsotg->supplies);
298         if (ret) {
299                 dev_err(hsotg->dev, "failed to request supplies: %d\n", ret);
300                 return ret;
301         }
302         return 0;
303 }
304
305 /**
306  * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
307  * DWC_otg driver
308  *
309  * @dev: Platform device
310  *
311  * This routine is called, for example, when the rmmod command is executed. The
312  * device may or may not be electrically present. If it is present, the driver
313  * stops device processing. Any resources used on behalf of this device are
314  * freed.
315  */
316 static int dwc2_driver_remove(struct platform_device *dev)
317 {
318         struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
319
320         dwc2_debugfs_exit(hsotg);
321         if (hsotg->hcd_enabled)
322                 dwc2_hcd_remove(hsotg);
323         if (hsotg->gadget_enabled)
324                 dwc2_hsotg_remove(hsotg);
325
326         if (hsotg->ll_hw_enabled)
327                 dwc2_lowlevel_hw_disable(hsotg);
328
329         if (hsotg->reset)
330                 reset_control_assert(hsotg->reset);
331
332         return 0;
333 }
334
335 /**
336  * dwc2_driver_shutdown() - Called on device shutdown
337  *
338  * @dev: Platform device
339  *
340  * In specific conditions (involving usb hubs) dwc2 devices can create a
341  * lot of interrupts, even to the point of overwhelming devices running
342  * at low frequencies. Some devices need to do special clock handling
343  * at shutdown-time which may bring the system clock below the threshold
344  * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
345  * prevents reboots/poweroffs from getting stuck in such cases.
346  */
347 static void dwc2_driver_shutdown(struct platform_device *dev)
348 {
349         struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
350
351         disable_irq(hsotg->irq);
352 }
353
354 /**
355  * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
356  * driver
357  *
358  * @dev: Platform device
359  *
360  * This routine creates the driver components required to control the device
361  * (core, HCD, and PCD) and initializes the device. The driver components are
362  * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
363  * in the device private data. This allows the driver to access the dwc2_hsotg
364  * structure on subsequent calls to driver methods for this device.
365  */
366 static int dwc2_driver_probe(struct platform_device *dev)
367 {
368         struct dwc2_hsotg *hsotg;
369         struct resource *res;
370         int retval;
371
372         hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
373         if (!hsotg)
374                 return -ENOMEM;
375
376         hsotg->dev = &dev->dev;
377
378         /*
379          * Use reasonable defaults so platforms don't have to provide these.
380          */
381         if (!dev->dev.dma_mask)
382                 dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
383         retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
384         if (retval)
385                 return retval;
386
387         res = platform_get_resource(dev, IORESOURCE_MEM, 0);
388         hsotg->regs = devm_ioremap_resource(&dev->dev, res);
389         if (IS_ERR(hsotg->regs))
390                 return PTR_ERR(hsotg->regs);
391
392         dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
393                 (unsigned long)res->start, hsotg->regs);
394
395         retval = dwc2_lowlevel_hw_init(hsotg);
396         if (retval)
397                 return retval;
398
399         spin_lock_init(&hsotg->lock);
400
401         hsotg->irq = platform_get_irq(dev, 0);
402         if (hsotg->irq < 0) {
403                 dev_err(&dev->dev, "missing IRQ resource\n");
404                 return hsotg->irq;
405         }
406
407         dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
408                 hsotg->irq);
409         retval = devm_request_irq(hsotg->dev, hsotg->irq,
410                                   dwc2_handle_common_intr, IRQF_SHARED,
411                                   dev_name(hsotg->dev), hsotg);
412         if (retval)
413                 return retval;
414
415         retval = dwc2_lowlevel_hw_enable(hsotg);
416         if (retval)
417                 return retval;
418
419         retval = dwc2_get_dr_mode(hsotg);
420         if (retval)
421                 goto error;
422
423         /*
424          * Reset before dwc2_get_hwparams() then it could get power-on real
425          * reset value form registers.
426          */
427         dwc2_core_reset_and_force_dr_mode(hsotg);
428
429         /* Detect config values from hardware */
430         retval = dwc2_get_hwparams(hsotg);
431         if (retval)
432                 goto error;
433
434         dwc2_force_dr_mode(hsotg);
435
436         retval = dwc2_init_params(hsotg);
437         if (retval)
438                 goto error;
439
440         if (hsotg->dr_mode != USB_DR_MODE_HOST) {
441                 retval = dwc2_gadget_init(hsotg, hsotg->irq);
442                 if (retval)
443                         goto error;
444                 hsotg->gadget_enabled = 1;
445         }
446
447         if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
448                 retval = dwc2_hcd_init(hsotg, hsotg->irq);
449                 if (retval) {
450                         if (hsotg->gadget_enabled)
451                                 dwc2_hsotg_remove(hsotg);
452                         goto error;
453                 }
454                 hsotg->hcd_enabled = 1;
455         }
456
457         platform_set_drvdata(dev, hsotg);
458
459         dwc2_debugfs_init(hsotg);
460
461         /* Gadget code manages lowlevel hw on its own */
462         if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
463                 dwc2_lowlevel_hw_disable(hsotg);
464
465         return 0;
466
467 error:
468         dwc2_lowlevel_hw_disable(hsotg);
469         return retval;
470 }
471
472 static int __maybe_unused dwc2_suspend(struct device *dev)
473 {
474         struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
475         int ret = 0;
476
477         if (dwc2_is_device_mode(dwc2))
478                 dwc2_hsotg_suspend(dwc2);
479
480         if (dwc2->ll_hw_enabled)
481                 ret = __dwc2_lowlevel_hw_disable(dwc2);
482
483         return ret;
484 }
485
486 static int __maybe_unused dwc2_resume(struct device *dev)
487 {
488         struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
489         int ret = 0;
490
491         if (dwc2->ll_hw_enabled) {
492                 ret = __dwc2_lowlevel_hw_enable(dwc2);
493                 if (ret)
494                         return ret;
495         }
496
497         if (dwc2_is_device_mode(dwc2))
498                 ret = dwc2_hsotg_resume(dwc2);
499
500         return ret;
501 }
502
503 static const struct dev_pm_ops dwc2_dev_pm_ops = {
504         SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
505 };
506
507 static struct platform_driver dwc2_platform_driver = {
508         .driver = {
509                 .name = dwc2_driver_name,
510                 .of_match_table = dwc2_of_match_table,
511                 .pm = &dwc2_dev_pm_ops,
512         },
513         .probe = dwc2_driver_probe,
514         .remove = dwc2_driver_remove,
515         .shutdown = dwc2_driver_shutdown,
516 };
517
518 module_platform_driver(dwc2_platform_driver);
519
520 MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue");
521 MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>");
522 MODULE_LICENSE("Dual BSD/GPL");