1 // SPDX-License-Identifier: GPL-1.0+
3 * n_tty.c --- implements the N_TTY line discipline.
5 * This code used to be in tty_io.c, but things are getting hairy
6 * enough that it made sense to split things off. (The N_TTY
7 * processing has changed so much that it's hardly recognizable,
10 * Note that the open routine for N_TTY is guaranteed never to return
11 * an error. This is because Linux will fall back to setting a line
12 * to N_TTY if it can not switch to any other line discipline.
14 * Written by Theodore Ts'o, Copyright 1994.
16 * This file also contains code originally written by Linus Torvalds,
17 * Copyright 1991, 1992, 1993, and by Julian Cowley, Copyright 1994.
19 * Reduced memory usage for older ARM systems - Russell King.
21 * 2000/01/20 Fixed SMP locking on put_tty_queue using bits of
22 * the patch by Andrew J. Kroll <ag784@freenet.buffalo.edu>
23 * who actually finally proved there really was a race.
25 * 2002/03/18 Implemented n_tty_wakeup to send SIGIO POLL_OUTs to
26 * waiting writing processes-Sapan Bhatia <sapan@corewars.org>.
27 * Also fixed a bug in BLOCKING mode where n_tty_write returns
31 #include <linux/types.h>
32 #include <linux/major.h>
33 #include <linux/errno.h>
34 #include <linux/signal.h>
35 #include <linux/fcntl.h>
36 #include <linux/sched.h>
37 #include <linux/interrupt.h>
38 #include <linux/tty.h>
39 #include <linux/timer.h>
40 #include <linux/ctype.h>
42 #include <linux/string.h>
43 #include <linux/slab.h>
44 #include <linux/poll.h>
45 #include <linux/bitops.h>
46 #include <linux/audit.h>
47 #include <linux/file.h>
48 #include <linux/uaccess.h>
49 #include <linux/module.h>
50 #include <linux/ratelimit.h>
51 #include <linux/vmalloc.h>
55 * Until this number of characters is queued in the xmit buffer, select will
56 * return "we have room for writes".
58 #define WAKEUP_CHARS 256
61 * This defines the low- and high-watermarks for throttling and
62 * unthrottling the TTY driver. These watermarks are used for
63 * controlling the space in the read buffer.
65 #define TTY_THRESHOLD_THROTTLE 128 /* now based on remaining room */
66 #define TTY_THRESHOLD_UNTHROTTLE 128
69 * Special byte codes used in the echo buffer to represent operations
70 * or special handling of characters. Bytes in the echo buffer that
71 * are not part of such special blocks are treated as normal character
74 #define ECHO_OP_START 0xff
75 #define ECHO_OP_MOVE_BACK_COL 0x80
76 #define ECHO_OP_SET_CANON_COL 0x81
77 #define ECHO_OP_ERASE_TAB 0x82
79 #define ECHO_COMMIT_WATERMARK 256
80 #define ECHO_BLOCK 256
81 #define ECHO_DISCARD_WATERMARK N_TTY_BUF_SIZE - (ECHO_BLOCK + 32)
86 # define n_tty_trace(f, args...) trace_printk(f, ##args)
88 # define n_tty_trace(f, args...) no_printk(f, ##args)
92 /* producer-published */
99 DECLARE_BITMAP(char_map, 256);
101 /* private to n_tty_receive_overrun (single-threaded) */
102 unsigned long overrun_time;
108 /* must hold exclusive termios_rwsem to reset these */
109 unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
110 unsigned char push:1;
112 /* shared by producer and consumer */
113 char read_buf[N_TTY_BUF_SIZE];
114 DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
115 unsigned char echo_buf[N_TTY_BUF_SIZE];
117 /* consumer-published */
121 /* # of chars looked ahead (to find software flow control chars) */
122 size_t lookahead_count;
124 /* protected by output lock */
126 unsigned int canon_column;
129 struct mutex atomic_read_lock;
130 struct mutex output_lock;
133 #define MASK(x) ((x) & (N_TTY_BUF_SIZE - 1))
135 static inline size_t read_cnt(struct n_tty_data *ldata)
137 return ldata->read_head - ldata->read_tail;
140 static inline unsigned char read_buf(struct n_tty_data *ldata, size_t i)
142 return ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)];
145 static inline unsigned char *read_buf_addr(struct n_tty_data *ldata, size_t i)
147 return &ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)];
150 static inline unsigned char echo_buf(struct n_tty_data *ldata, size_t i)
152 smp_rmb(); /* Matches smp_wmb() in add_echo_byte(). */
153 return ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)];
156 static inline unsigned char *echo_buf_addr(struct n_tty_data *ldata, size_t i)
158 return &ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)];
161 /* If we are not echoing the data, perhaps this is a secret so erase it */
162 static void zero_buffer(struct tty_struct *tty, u8 *buffer, int size)
164 bool icanon = !!L_ICANON(tty);
165 bool no_echo = !L_ECHO(tty);
167 if (icanon && no_echo)
168 memset(buffer, 0x00, size);
171 static void tty_copy(struct tty_struct *tty, void *to, size_t tail, size_t n)
173 struct n_tty_data *ldata = tty->disc_data;
174 size_t size = N_TTY_BUF_SIZE - tail;
175 void *from = read_buf_addr(ldata, tail);
178 tty_audit_add_data(tty, from, size);
179 memcpy(to, from, size);
180 zero_buffer(tty, from, size);
183 from = ldata->read_buf;
186 tty_audit_add_data(tty, from, n);
188 zero_buffer(tty, from, n);
192 * n_tty_kick_worker - start input worker (if required)
195 * Re-schedules the flip buffer work if it may have stopped.
198 * * Caller holds exclusive %termios_rwsem, or
199 * * n_tty_read()/consumer path:
200 * holds non-exclusive %termios_rwsem
202 static void n_tty_kick_worker(struct tty_struct *tty)
204 struct n_tty_data *ldata = tty->disc_data;
206 /* Did the input worker stop? Restart it */
207 if (unlikely(ldata->no_room)) {
210 WARN_RATELIMIT(tty->port->itty == NULL,
211 "scheduling with invalid itty\n");
212 /* see if ldisc has been killed - if so, this means that
213 * even though the ldisc has been halted and ->buf.work
214 * cancelled, ->buf.work is about to be rescheduled
216 WARN_RATELIMIT(test_bit(TTY_LDISC_HALTED, &tty->flags),
217 "scheduling buffer work for halted ldisc\n");
218 tty_buffer_restart_work(tty->port);
222 static ssize_t chars_in_buffer(struct tty_struct *tty)
224 struct n_tty_data *ldata = tty->disc_data;
228 n = ldata->commit_head - ldata->read_tail;
230 n = ldata->canon_head - ldata->read_tail;
235 * n_tty_write_wakeup - asynchronous I/O notifier
238 * Required for the ptys, serial driver etc. since processes that attach
239 * themselves to the master and rely on ASYNC IO must be woken up.
241 static void n_tty_write_wakeup(struct tty_struct *tty)
243 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
244 kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
247 static void n_tty_check_throttle(struct tty_struct *tty)
249 struct n_tty_data *ldata = tty->disc_data;
252 * Check the remaining room for the input canonicalization
253 * mode. We don't want to throttle the driver if we're in
254 * canonical mode and don't have a newline yet!
256 if (ldata->icanon && ldata->canon_head == ldata->read_tail)
261 tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
262 if (N_TTY_BUF_SIZE - read_cnt(ldata) >= TTY_THRESHOLD_THROTTLE)
264 throttled = tty_throttle_safe(tty);
268 __tty_set_flow_change(tty, 0);
271 static void n_tty_check_unthrottle(struct tty_struct *tty)
273 if (tty->driver->type == TTY_DRIVER_TYPE_PTY) {
274 if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
276 n_tty_kick_worker(tty);
277 tty_wakeup(tty->link);
281 /* If there is enough space in the read buffer now, let the
282 * low-level driver know. We use chars_in_buffer() to
283 * check the buffer, as it now knows about canonical mode.
284 * Otherwise, if the driver is throttled and the line is
285 * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode,
286 * we won't get any more characters.
291 tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
292 if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
294 n_tty_kick_worker(tty);
295 unthrottled = tty_unthrottle_safe(tty);
299 __tty_set_flow_change(tty, 0);
303 * put_tty_queue - add character to tty
307 * Add a character to the tty read_buf queue.
310 * * n_tty_receive_buf()/producer path:
311 * caller holds non-exclusive %termios_rwsem
313 static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
315 *read_buf_addr(ldata, ldata->read_head) = c;
320 * reset_buffer_flags - reset buffer state
321 * @ldata: line disc data to reset
323 * Reset the read buffer counters and clear the flags. Called from
324 * n_tty_open() and n_tty_flush_buffer().
327 * * caller holds exclusive %termios_rwsem, or
328 * * (locking is not required)
330 static void reset_buffer_flags(struct n_tty_data *ldata)
332 ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
333 ldata->commit_head = 0;
334 ldata->line_start = 0;
337 bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
340 ldata->lookahead_count = 0;
343 static void n_tty_packet_mode_flush(struct tty_struct *tty)
347 if (tty->link->ctrl.packet) {
348 spin_lock_irqsave(&tty->ctrl.lock, flags);
349 tty->ctrl.pktstatus |= TIOCPKT_FLUSHREAD;
350 spin_unlock_irqrestore(&tty->ctrl.lock, flags);
351 wake_up_interruptible(&tty->link->read_wait);
356 * n_tty_flush_buffer - clean input queue
357 * @tty: terminal device
359 * Flush the input buffer. Called when the tty layer wants the buffer flushed
360 * (eg at hangup) or when the %N_TTY line discipline internally has to clean
361 * the pending queue (for example some signals).
363 * Holds %termios_rwsem to exclude producer/consumer while buffer indices are
366 * Locking: %ctrl.lock, exclusive %termios_rwsem
368 static void n_tty_flush_buffer(struct tty_struct *tty)
370 down_write(&tty->termios_rwsem);
371 reset_buffer_flags(tty->disc_data);
372 n_tty_kick_worker(tty);
375 n_tty_packet_mode_flush(tty);
376 up_write(&tty->termios_rwsem);
380 * is_utf8_continuation - utf8 multibyte check
383 * Returns: true if the utf8 character @c is a multibyte continuation
384 * character. We use this to correctly compute the on-screen size of the
385 * character when printing.
387 static inline int is_utf8_continuation(unsigned char c)
389 return (c & 0xc0) == 0x80;
393 * is_continuation - multibyte check
395 * @tty: terminal device
397 * Returns: true if the utf8 character @c is a multibyte continuation character
398 * and the terminal is in unicode mode.
400 static inline int is_continuation(unsigned char c, struct tty_struct *tty)
402 return I_IUTF8(tty) && is_utf8_continuation(c);
406 * do_output_char - output one character
407 * @c: character (or partial unicode symbol)
408 * @tty: terminal device
409 * @space: space available in tty driver write buffer
411 * This is a helper function that handles one output character (including
412 * special characters like TAB, CR, LF, etc.), doing OPOST processing and
413 * putting the results in the tty driver's write buffer.
415 * Note that Linux currently ignores TABDLY, CRDLY, VTDLY, FFDLY and NLDLY.
416 * They simply aren't relevant in the world today. If you ever need them, add
419 * Returns: the number of bytes of buffer space used or -1 if no space left.
421 * Locking: should be called under the %output_lock to protect the column state
422 * and space left in the buffer.
424 static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
426 struct n_tty_data *ldata = tty->disc_data;
439 ldata->canon_column = ldata->column = 0;
440 tty->ops->write(tty, "\r\n", 2);
443 ldata->canon_column = ldata->column;
446 if (O_ONOCR(tty) && ldata->column == 0)
451 ldata->canon_column = ldata->column = 0;
454 ldata->canon_column = ldata->column = 0;
457 spaces = 8 - (ldata->column & 7);
458 if (O_TABDLY(tty) == XTABS) {
461 ldata->column += spaces;
462 tty->ops->write(tty, " ", spaces);
465 ldata->column += spaces;
468 if (ldata->column > 0)
475 if (!is_continuation(c, tty))
481 tty_put_char(tty, c);
486 * process_output - output post processor
487 * @c: character (or partial unicode symbol)
488 * @tty: terminal device
490 * Output one character with OPOST processing.
492 * Returns: -1 when the output device is full and the character must be
495 * Locking: %output_lock to protect column state and space left (also, this is
496 *called from n_tty_write() under the tty layer write lock).
498 static int process_output(unsigned char c, struct tty_struct *tty)
500 struct n_tty_data *ldata = tty->disc_data;
503 mutex_lock(&ldata->output_lock);
505 space = tty_write_room(tty);
506 retval = do_output_char(c, tty, space);
508 mutex_unlock(&ldata->output_lock);
516 * process_output_block - block post processor
517 * @tty: terminal device
518 * @buf: character buffer
519 * @nr: number of bytes to output
521 * Output a block of characters with OPOST processing.
523 * This path is used to speed up block console writes, among other things when
524 * processing blocks of output data. It handles only the simple cases normally
525 * found and helps to generate blocks of symbols for the console driver and
526 * thus improve performance.
528 * Returns: the number of characters output.
530 * Locking: %output_lock to protect column state and space left (also, this is
531 * called from n_tty_write() under the tty layer write lock).
533 static ssize_t process_output_block(struct tty_struct *tty,
534 const unsigned char *buf, unsigned int nr)
536 struct n_tty_data *ldata = tty->disc_data;
539 const unsigned char *cp;
541 mutex_lock(&ldata->output_lock);
543 space = tty_write_room(tty);
545 mutex_unlock(&ldata->output_lock);
551 for (i = 0, cp = buf; i < nr; i++, cp++) {
552 unsigned char c = *cp;
560 ldata->canon_column = ldata->column;
563 if (O_ONOCR(tty) && ldata->column == 0)
567 ldata->canon_column = ldata->column = 0;
572 if (ldata->column > 0)
579 if (!is_continuation(c, tty))
586 i = tty->ops->write(tty, buf, i);
588 mutex_unlock(&ldata->output_lock);
593 * __process_echoes - write pending echo characters
594 * @tty: terminal device
596 * Write previously buffered echo (and other ldisc-generated) characters to the
599 * Characters generated by the ldisc (including echoes) need to be buffered
600 * because the driver's write buffer can fill during heavy program output.
601 * Echoing straight to the driver will often fail under these conditions,
602 * causing lost characters and resulting mismatches of ldisc state information.
604 * Since the ldisc state must represent the characters actually sent to the
605 * driver at the time of the write, operations like certain changes in column
606 * state are also saved in the buffer and executed here.
608 * A circular fifo buffer is used so that the most recent characters are
609 * prioritized. Also, when control characters are echoed with a prefixed "^",
610 * the pair is treated atomically and thus not separated.
612 * Locking: callers must hold %output_lock.
614 static size_t __process_echoes(struct tty_struct *tty)
616 struct n_tty_data *ldata = tty->disc_data;
617 int space, old_space;
621 old_space = space = tty_write_room(tty);
623 tail = ldata->echo_tail;
624 while (MASK(ldata->echo_commit) != MASK(tail)) {
625 c = echo_buf(ldata, tail);
626 if (c == ECHO_OP_START) {
628 int no_space_left = 0;
631 * Since add_echo_byte() is called without holding
632 * output_lock, we might see only portion of multi-byte
635 if (MASK(ldata->echo_commit) == MASK(tail + 1))
638 * If the buffer byte is the start of a multi-byte
639 * operation, get the next byte, which is either the
640 * op code or a control character value.
642 op = echo_buf(ldata, tail + 1);
645 case ECHO_OP_ERASE_TAB: {
646 unsigned int num_chars, num_bs;
648 if (MASK(ldata->echo_commit) == MASK(tail + 2))
650 num_chars = echo_buf(ldata, tail + 2);
653 * Determine how many columns to go back
654 * in order to erase the tab.
655 * This depends on the number of columns
656 * used by other characters within the tab
657 * area. If this (modulo 8) count is from
658 * the start of input rather than from a
659 * previous tab, we offset by canon column.
660 * Otherwise, tab spacing is normal.
662 if (!(num_chars & 0x80))
663 num_chars += ldata->canon_column;
664 num_bs = 8 - (num_chars & 7);
666 if (num_bs > space) {
672 tty_put_char(tty, '\b');
673 if (ldata->column > 0)
679 case ECHO_OP_SET_CANON_COL:
680 ldata->canon_column = ldata->column;
684 case ECHO_OP_MOVE_BACK_COL:
685 if (ldata->column > 0)
691 /* This is an escaped echo op start code */
696 tty_put_char(tty, ECHO_OP_START);
704 * If the op is not a special byte code,
705 * it is a ctrl char tagged to be echoed
706 * as "^X" (where X is the letter
707 * representing the control char).
708 * Note that we must ensure there is
709 * enough space for the whole ctrl pair.
716 tty_put_char(tty, '^');
717 tty_put_char(tty, op ^ 0100);
727 int retval = do_output_char(c, tty, space);
734 tty_put_char(tty, c);
741 /* If the echo buffer is nearly full (so that the possibility exists
742 * of echo overrun before the next commit), then discard enough
743 * data at the tail to prevent a subsequent overrun */
744 while (ldata->echo_commit > tail &&
745 ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) {
746 if (echo_buf(ldata, tail) == ECHO_OP_START) {
747 if (echo_buf(ldata, tail + 1) == ECHO_OP_ERASE_TAB)
756 ldata->echo_tail = tail;
757 return old_space - space;
760 static void commit_echoes(struct tty_struct *tty)
762 struct n_tty_data *ldata = tty->disc_data;
763 size_t nr, old, echoed;
766 mutex_lock(&ldata->output_lock);
767 head = ldata->echo_head;
768 ldata->echo_mark = head;
769 old = ldata->echo_commit - ldata->echo_tail;
771 /* Process committed echoes if the accumulated # of bytes
772 * is over the threshold (and try again each time another
773 * block is accumulated) */
774 nr = head - ldata->echo_tail;
775 if (nr < ECHO_COMMIT_WATERMARK ||
776 (nr % ECHO_BLOCK > old % ECHO_BLOCK)) {
777 mutex_unlock(&ldata->output_lock);
781 ldata->echo_commit = head;
782 echoed = __process_echoes(tty);
783 mutex_unlock(&ldata->output_lock);
785 if (echoed && tty->ops->flush_chars)
786 tty->ops->flush_chars(tty);
789 static void process_echoes(struct tty_struct *tty)
791 struct n_tty_data *ldata = tty->disc_data;
794 if (ldata->echo_mark == ldata->echo_tail)
797 mutex_lock(&ldata->output_lock);
798 ldata->echo_commit = ldata->echo_mark;
799 echoed = __process_echoes(tty);
800 mutex_unlock(&ldata->output_lock);
802 if (echoed && tty->ops->flush_chars)
803 tty->ops->flush_chars(tty);
806 /* NB: echo_mark and echo_head should be equivalent here */
807 static void flush_echoes(struct tty_struct *tty)
809 struct n_tty_data *ldata = tty->disc_data;
811 if ((!L_ECHO(tty) && !L_ECHONL(tty)) ||
812 ldata->echo_commit == ldata->echo_head)
815 mutex_lock(&ldata->output_lock);
816 ldata->echo_commit = ldata->echo_head;
817 __process_echoes(tty);
818 mutex_unlock(&ldata->output_lock);
822 * add_echo_byte - add a byte to the echo buffer
823 * @c: unicode byte to echo
826 * Add a character or operation byte to the echo buffer.
828 static inline void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
830 *echo_buf_addr(ldata, ldata->echo_head) = c;
831 smp_wmb(); /* Matches smp_rmb() in echo_buf(). */
836 * echo_move_back_col - add operation to move back a column
839 * Add an operation to the echo buffer to move back one column.
841 static void echo_move_back_col(struct n_tty_data *ldata)
843 add_echo_byte(ECHO_OP_START, ldata);
844 add_echo_byte(ECHO_OP_MOVE_BACK_COL, ldata);
848 * echo_set_canon_col - add operation to set the canon column
851 * Add an operation to the echo buffer to set the canon column to the current
854 static void echo_set_canon_col(struct n_tty_data *ldata)
856 add_echo_byte(ECHO_OP_START, ldata);
857 add_echo_byte(ECHO_OP_SET_CANON_COL, ldata);
861 * echo_erase_tab - add operation to erase a tab
862 * @num_chars: number of character columns already used
863 * @after_tab: true if num_chars starts after a previous tab
866 * Add an operation to the echo buffer to erase a tab.
868 * Called by the eraser function, which knows how many character columns have
869 * been used since either a previous tab or the start of input. This
870 * information will be used later, along with canon column (if applicable), to
871 * go back the correct number of columns.
873 static void echo_erase_tab(unsigned int num_chars, int after_tab,
874 struct n_tty_data *ldata)
876 add_echo_byte(ECHO_OP_START, ldata);
877 add_echo_byte(ECHO_OP_ERASE_TAB, ldata);
879 /* We only need to know this modulo 8 (tab spacing) */
882 /* Set the high bit as a flag if num_chars is after a previous tab */
886 add_echo_byte(num_chars, ldata);
890 * echo_char_raw - echo a character raw
891 * @c: unicode byte to echo
892 * @ldata: line disc data
894 * Echo user input back onto the screen. This must be called only when
895 * L_ECHO(tty) is true. Called from the &tty_driver.receive_buf() path.
897 * This variant does not treat control characters specially.
899 static void echo_char_raw(unsigned char c, struct n_tty_data *ldata)
901 if (c == ECHO_OP_START) {
902 add_echo_byte(ECHO_OP_START, ldata);
903 add_echo_byte(ECHO_OP_START, ldata);
905 add_echo_byte(c, ldata);
910 * echo_char - echo a character
911 * @c: unicode byte to echo
912 * @tty: terminal device
914 * Echo user input back onto the screen. This must be called only when
915 * L_ECHO(tty) is true. Called from the &tty_driver.receive_buf() path.
917 * This variant tags control characters to be echoed as "^X" (where X is the
918 * letter representing the control char).
920 static void echo_char(unsigned char c, struct tty_struct *tty)
922 struct n_tty_data *ldata = tty->disc_data;
924 if (c == ECHO_OP_START) {
925 add_echo_byte(ECHO_OP_START, ldata);
926 add_echo_byte(ECHO_OP_START, ldata);
928 if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t')
929 add_echo_byte(ECHO_OP_START, ldata);
930 add_echo_byte(c, ldata);
935 * finish_erasing - complete erase
938 static inline void finish_erasing(struct n_tty_data *ldata)
940 if (ldata->erasing) {
941 echo_char_raw('/', ldata);
947 * eraser - handle erase function
948 * @c: character input
949 * @tty: terminal device
951 * Perform erase and necessary output when an erase character is present in the
952 * stream from the driver layer. Handles the complexities of UTF-8 multibyte
955 * Locking: n_tty_receive_buf()/producer path:
956 * caller holds non-exclusive %termios_rwsem
958 static void eraser(unsigned char c, struct tty_struct *tty)
960 struct n_tty_data *ldata = tty->disc_data;
961 enum { ERASE, WERASE, KILL } kill_type;
966 if (ldata->read_head == ldata->canon_head) {
967 /* process_output('\a', tty); */ /* what do you think? */
970 if (c == ERASE_CHAR(tty))
972 else if (c == WERASE_CHAR(tty))
976 ldata->read_head = ldata->canon_head;
979 if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
980 ldata->read_head = ldata->canon_head;
981 finish_erasing(ldata);
982 echo_char(KILL_CHAR(tty), tty);
983 /* Add a newline if ECHOK is on and ECHOKE is off. */
985 echo_char_raw('\n', ldata);
992 while (MASK(ldata->read_head) != MASK(ldata->canon_head)) {
993 head = ldata->read_head;
995 /* erase a single possibly multibyte character */
998 c = read_buf(ldata, head);
999 } while (is_continuation(c, tty) &&
1000 MASK(head) != MASK(ldata->canon_head));
1002 /* do not partially erase */
1003 if (is_continuation(c, tty))
1006 if (kill_type == WERASE) {
1007 /* Equivalent to BSD's ALTWERASE. */
1008 if (isalnum(c) || c == '_')
1010 else if (seen_alnums)
1013 cnt = ldata->read_head - head;
1014 ldata->read_head = head;
1016 if (L_ECHOPRT(tty)) {
1017 if (!ldata->erasing) {
1018 echo_char_raw('\\', ldata);
1021 /* if cnt > 1, output a multi-byte character */
1025 echo_char_raw(read_buf(ldata, head), ldata);
1026 echo_move_back_col(ldata);
1028 } else if (kill_type == ERASE && !L_ECHOE(tty)) {
1029 echo_char(ERASE_CHAR(tty), tty);
1030 } else if (c == '\t') {
1031 unsigned int num_chars = 0;
1033 size_t tail = ldata->read_head;
1036 * Count the columns used for characters
1037 * since the start of input or after a
1039 * This info is used to go back the correct
1040 * number of columns.
1042 while (MASK(tail) != MASK(ldata->canon_head)) {
1044 c = read_buf(ldata, tail);
1048 } else if (iscntrl(c)) {
1051 } else if (!is_continuation(c, tty)) {
1055 echo_erase_tab(num_chars, after_tab, ldata);
1057 if (iscntrl(c) && L_ECHOCTL(tty)) {
1058 echo_char_raw('\b', ldata);
1059 echo_char_raw(' ', ldata);
1060 echo_char_raw('\b', ldata);
1062 if (!iscntrl(c) || L_ECHOCTL(tty)) {
1063 echo_char_raw('\b', ldata);
1064 echo_char_raw(' ', ldata);
1065 echo_char_raw('\b', ldata);
1069 if (kill_type == ERASE)
1072 if (ldata->read_head == ldata->canon_head && L_ECHO(tty))
1073 finish_erasing(ldata);
1077 static void __isig(int sig, struct tty_struct *tty)
1079 struct pid *tty_pgrp = tty_get_pgrp(tty);
1081 kill_pgrp(tty_pgrp, sig, 1);
1087 * isig - handle the ISIG optio
1091 * Called when a signal is being sent due to terminal input. Called from the
1092 * &tty_driver.receive_buf() path, so serialized.
1094 * Performs input and output flush if !NOFLSH. In this context, the echo
1095 * buffer is 'output'. The signal is processed first to alert any current
1096 * readers or writers to discontinue and exit their i/o loops.
1098 * Locking: %ctrl.lock
1100 static void isig(int sig, struct tty_struct *tty)
1102 struct n_tty_data *ldata = tty->disc_data;
1104 if (L_NOFLSH(tty)) {
1108 } else { /* signal and flush */
1109 up_read(&tty->termios_rwsem);
1110 down_write(&tty->termios_rwsem);
1114 /* clear echo buffer */
1115 mutex_lock(&ldata->output_lock);
1116 ldata->echo_head = ldata->echo_tail = 0;
1117 ldata->echo_mark = ldata->echo_commit = 0;
1118 mutex_unlock(&ldata->output_lock);
1120 /* clear output buffer */
1121 tty_driver_flush_buffer(tty);
1123 /* clear input buffer */
1124 reset_buffer_flags(tty->disc_data);
1126 /* notify pty master of flush */
1128 n_tty_packet_mode_flush(tty);
1130 up_write(&tty->termios_rwsem);
1131 down_read(&tty->termios_rwsem);
1136 * n_tty_receive_break - handle break
1139 * An RS232 break event has been hit in the incoming bitstream. This can cause
1140 * a variety of events depending upon the termios settings.
1142 * Locking: n_tty_receive_buf()/producer path:
1143 * caller holds non-exclusive termios_rwsem
1145 * Note: may get exclusive %termios_rwsem if flushing input buffer
1147 static void n_tty_receive_break(struct tty_struct *tty)
1149 struct n_tty_data *ldata = tty->disc_data;
1153 if (I_BRKINT(tty)) {
1157 if (I_PARMRK(tty)) {
1158 put_tty_queue('\377', ldata);
1159 put_tty_queue('\0', ldata);
1161 put_tty_queue('\0', ldata);
1165 * n_tty_receive_overrun - handle overrun reporting
1168 * Data arrived faster than we could process it. While the tty driver has
1169 * flagged this the bits that were missed are gone forever.
1171 * Called from the receive_buf path so single threaded. Does not need locking
1172 * as num_overrun and overrun_time are function private.
1174 static void n_tty_receive_overrun(struct tty_struct *tty)
1176 struct n_tty_data *ldata = tty->disc_data;
1178 ldata->num_overrun++;
1179 if (time_after(jiffies, ldata->overrun_time + HZ) ||
1180 time_after(ldata->overrun_time, jiffies)) {
1181 tty_warn(tty, "%d input overrun(s)\n", ldata->num_overrun);
1182 ldata->overrun_time = jiffies;
1183 ldata->num_overrun = 0;
1188 * n_tty_receive_parity_error - error notifier
1189 * @tty: terminal device
1192 * Process a parity error and queue the right data to indicate the error case
1195 * Locking: n_tty_receive_buf()/producer path:
1196 * caller holds non-exclusive %termios_rwsem
1198 static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c)
1200 struct n_tty_data *ldata = tty->disc_data;
1205 if (I_PARMRK(tty)) {
1206 put_tty_queue('\377', ldata);
1207 put_tty_queue('\0', ldata);
1208 put_tty_queue(c, ldata);
1210 put_tty_queue('\0', ldata);
1212 put_tty_queue(c, ldata);
1216 n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
1225 process_echoes(tty);
1228 static bool n_tty_is_char_flow_ctrl(struct tty_struct *tty, unsigned char c)
1230 return c == START_CHAR(tty) || c == STOP_CHAR(tty);
1234 * n_tty_receive_char_flow_ctrl - receive flow control chars
1235 * @tty: terminal device
1237 * @lookahead_done: lookahead has processed this character already
1239 * Receive and process flow control character actions.
1241 * In case lookahead for flow control chars already handled the character in
1242 * advance to the normal receive, the actions are skipped during normal
1245 * Returns true if @c is consumed as flow-control character, the character
1246 * must not be treated as normal character.
1248 static bool n_tty_receive_char_flow_ctrl(struct tty_struct *tty, unsigned char c,
1249 bool lookahead_done)
1251 if (!n_tty_is_char_flow_ctrl(tty, c))
1257 if (c == START_CHAR(tty)) {
1259 process_echoes(tty);
1268 static void n_tty_receive_char_special(struct tty_struct *tty, unsigned char c,
1269 bool lookahead_done)
1271 struct n_tty_data *ldata = tty->disc_data;
1273 if (I_IXON(tty) && n_tty_receive_char_flow_ctrl(tty, c, lookahead_done))
1277 if (c == INTR_CHAR(tty)) {
1278 n_tty_receive_signal_char(tty, SIGINT, c);
1280 } else if (c == QUIT_CHAR(tty)) {
1281 n_tty_receive_signal_char(tty, SIGQUIT, c);
1283 } else if (c == SUSP_CHAR(tty)) {
1284 n_tty_receive_signal_char(tty, SIGTSTP, c);
1289 if (tty->flow.stopped && !tty->flow.tco_stopped && I_IXON(tty) && I_IXANY(tty)) {
1291 process_echoes(tty);
1299 } else if (c == '\n' && I_INLCR(tty))
1302 if (ldata->icanon) {
1303 if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) ||
1304 (c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
1309 if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
1312 finish_erasing(ldata);
1313 if (L_ECHOCTL(tty)) {
1314 echo_char_raw('^', ldata);
1315 echo_char_raw('\b', ldata);
1321 if (c == REPRINT_CHAR(tty) && L_ECHO(tty) && L_IEXTEN(tty)) {
1322 size_t tail = ldata->canon_head;
1324 finish_erasing(ldata);
1326 echo_char_raw('\n', ldata);
1327 while (MASK(tail) != MASK(ldata->read_head)) {
1328 echo_char(read_buf(ldata, tail), tty);
1335 if (L_ECHO(tty) || L_ECHONL(tty)) {
1336 echo_char_raw('\n', ldata);
1339 goto handle_newline;
1341 if (c == EOF_CHAR(tty)) {
1342 c = __DISABLED_CHAR;
1343 goto handle_newline;
1345 if ((c == EOL_CHAR(tty)) ||
1346 (c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
1348 * XXX are EOL_CHAR and EOL2_CHAR echoed?!?
1351 /* Record the column of first canon char. */
1352 if (ldata->canon_head == ldata->read_head)
1353 echo_set_canon_col(ldata);
1358 * XXX does PARMRK doubling happen for
1359 * EOL_CHAR and EOL2_CHAR?
1361 if (c == (unsigned char) '\377' && I_PARMRK(tty))
1362 put_tty_queue(c, ldata);
1365 set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags);
1366 put_tty_queue(c, ldata);
1367 smp_store_release(&ldata->canon_head, ldata->read_head);
1368 kill_fasync(&tty->fasync, SIGIO, POLL_IN);
1369 wake_up_interruptible_poll(&tty->read_wait, EPOLLIN | EPOLLRDNORM);
1375 finish_erasing(ldata);
1377 echo_char_raw('\n', ldata);
1379 /* Record the column of first canon char. */
1380 if (ldata->canon_head == ldata->read_head)
1381 echo_set_canon_col(ldata);
1387 /* PARMRK doubling check */
1388 if (c == (unsigned char) '\377' && I_PARMRK(tty))
1389 put_tty_queue(c, ldata);
1391 put_tty_queue(c, ldata);
1395 * n_tty_receive_char - perform processing
1396 * @tty: terminal device
1399 * Process an individual character of input received from the driver. This is
1400 * serialized with respect to itself by the rules for the driver above.
1402 * Locking: n_tty_receive_buf()/producer path:
1403 * caller holds non-exclusive %termios_rwsem
1404 * publishes canon_head if canonical mode is active
1406 static void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
1408 struct n_tty_data *ldata = tty->disc_data;
1410 if (tty->flow.stopped && !tty->flow.tco_stopped && I_IXON(tty) && I_IXANY(tty)) {
1412 process_echoes(tty);
1415 finish_erasing(ldata);
1416 /* Record the column of first canon char. */
1417 if (ldata->canon_head == ldata->read_head)
1418 echo_set_canon_col(ldata);
1422 /* PARMRK doubling check */
1423 if (c == (unsigned char) '\377' && I_PARMRK(tty))
1424 put_tty_queue(c, ldata);
1425 put_tty_queue(c, ldata);
1428 static void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c,
1429 bool lookahead_done)
1433 if (I_IUCLC(tty) && L_IEXTEN(tty))
1437 if (!n_tty_receive_char_flow_ctrl(tty, c, lookahead_done) &&
1438 tty->flow.stopped && !tty->flow.tco_stopped && I_IXANY(tty) &&
1439 c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) &&
1440 c != SUSP_CHAR(tty)) {
1442 process_echoes(tty);
1448 n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag)
1452 n_tty_receive_break(tty);
1456 n_tty_receive_parity_error(tty, c);
1459 n_tty_receive_overrun(tty);
1462 tty_err(tty, "unknown flag %d\n", flag);
1468 n_tty_receive_char_lnext(struct tty_struct *tty, unsigned char c, char flag)
1470 struct n_tty_data *ldata = tty->disc_data;
1473 if (likely(flag == TTY_NORMAL)) {
1476 if (I_IUCLC(tty) && L_IEXTEN(tty))
1478 n_tty_receive_char(tty, c);
1480 n_tty_receive_char_flagged(tty, c, flag);
1483 /* Caller must ensure count > 0 */
1484 static void n_tty_lookahead_flow_ctrl(struct tty_struct *tty, const unsigned char *cp,
1485 const unsigned char *fp, unsigned int count)
1487 struct n_tty_data *ldata = tty->disc_data;
1488 unsigned char flag = TTY_NORMAL;
1490 ldata->lookahead_count += count;
1498 if (likely(flag == TTY_NORMAL))
1499 n_tty_receive_char_flow_ctrl(tty, *cp, false);
1505 n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp,
1506 const char *fp, int count)
1508 struct n_tty_data *ldata = tty->disc_data;
1511 head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
1512 n = min_t(size_t, count, N_TTY_BUF_SIZE - head);
1513 memcpy(read_buf_addr(ldata, head), cp, n);
1514 ldata->read_head += n;
1518 head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
1519 n = min_t(size_t, count, N_TTY_BUF_SIZE - head);
1520 memcpy(read_buf_addr(ldata, head), cp, n);
1521 ldata->read_head += n;
1525 n_tty_receive_buf_raw(struct tty_struct *tty, const unsigned char *cp,
1526 const char *fp, int count)
1528 struct n_tty_data *ldata = tty->disc_data;
1529 char flag = TTY_NORMAL;
1534 if (likely(flag == TTY_NORMAL))
1535 put_tty_queue(*cp++, ldata);
1537 n_tty_receive_char_flagged(tty, *cp++, flag);
1542 n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
1543 const char *fp, int count, bool lookahead_done)
1545 char flag = TTY_NORMAL;
1550 if (likely(flag == TTY_NORMAL))
1551 n_tty_receive_char_closing(tty, *cp++, lookahead_done);
1555 static void n_tty_receive_buf_standard(struct tty_struct *tty,
1556 const unsigned char *cp, const char *fp, int count, bool lookahead_done)
1558 struct n_tty_data *ldata = tty->disc_data;
1559 char flag = TTY_NORMAL;
1562 unsigned char c = *cp++;
1568 n_tty_receive_char_lnext(tty, c, flag);
1572 if (unlikely(flag != TTY_NORMAL)) {
1573 n_tty_receive_char_flagged(tty, c, flag);
1579 if (I_IUCLC(tty) && L_IEXTEN(tty))
1581 if (L_EXTPROC(tty)) {
1582 put_tty_queue(c, ldata);
1586 if (test_bit(c, ldata->char_map))
1587 n_tty_receive_char_special(tty, c, lookahead_done);
1589 n_tty_receive_char(tty, c);
1593 static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
1594 const char *fp, int count)
1596 struct n_tty_data *ldata = tty->disc_data;
1597 bool preops = I_ISTRIP(tty) || (I_IUCLC(tty) && L_IEXTEN(tty));
1598 size_t la_count = min_t(size_t, ldata->lookahead_count, count);
1600 if (ldata->real_raw)
1601 n_tty_receive_buf_real_raw(tty, cp, fp, count);
1602 else if (ldata->raw || (L_EXTPROC(tty) && !preops))
1603 n_tty_receive_buf_raw(tty, cp, fp, count);
1604 else if (tty->closing && !L_EXTPROC(tty)) {
1606 n_tty_receive_buf_closing(tty, cp, fp, la_count, true);
1607 if (count > la_count)
1608 n_tty_receive_buf_closing(tty, cp, fp, count - la_count, false);
1611 n_tty_receive_buf_standard(tty, cp, fp, la_count, true);
1612 if (count > la_count)
1613 n_tty_receive_buf_standard(tty, cp, fp, count - la_count, false);
1616 if (tty->ops->flush_chars)
1617 tty->ops->flush_chars(tty);
1620 ldata->lookahead_count -= la_count;
1622 if (ldata->icanon && !L_EXTPROC(tty))
1625 /* publish read_head to consumer */
1626 smp_store_release(&ldata->commit_head, ldata->read_head);
1628 if (read_cnt(ldata)) {
1629 kill_fasync(&tty->fasync, SIGIO, POLL_IN);
1630 wake_up_interruptible_poll(&tty->read_wait, EPOLLIN | EPOLLRDNORM);
1635 * n_tty_receive_buf_common - process input
1636 * @tty: device to receive input
1638 * @fp: flags for each char (if %NULL, all chars are %TTY_NORMAL)
1639 * @count: number of input chars in @cp
1640 * @flow: enable flow control
1642 * Called by the terminal driver when a block of characters has been received.
1643 * This function must be called from soft contexts not from interrupt context.
1644 * The driver is responsible for making calls one at a time and in order (or
1645 * using flush_to_ldisc()).
1647 * Returns: the # of input chars from @cp which were processed.
1649 * In canonical mode, the maximum line length is 4096 chars (including the line
1650 * termination char); lines longer than 4096 chars are truncated. After 4095
1651 * chars, input data is still processed but not stored. Overflow processing
1652 * ensures the tty can always receive more input until at least one line can be
1655 * In non-canonical mode, the read buffer will only accept 4095 chars; this
1656 * provides the necessary space for a newline char if the input mode is
1657 * switched to canonical.
1659 * Note it is possible for the read buffer to _contain_ 4096 chars in
1660 * non-canonical mode: the read buffer could already contain the maximum canon
1661 * line of 4096 chars when the mode is switched to non-canonical.
1663 * Locking: n_tty_receive_buf()/producer path:
1664 * claims non-exclusive %termios_rwsem
1665 * publishes commit_head or canon_head
1668 n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp,
1669 const char *fp, int count, int flow)
1671 struct n_tty_data *ldata = tty->disc_data;
1672 int room, n, rcvd = 0, overflow;
1674 down_read(&tty->termios_rwsem);
1678 * When PARMRK is set, each input char may take up to 3 chars
1679 * in the read buf; reduce the buffer space avail by 3x
1681 * If we are doing input canonicalization, and there are no
1682 * pending newlines, let characters through without limit, so
1683 * that erase characters will be handled. Other excess
1684 * characters will be beeped.
1686 * paired with store in *_copy_from_read_buf() -- guarantees
1687 * the consumer has loaded the data in read_buf up to the new
1688 * read_tail (so this producer will not overwrite unread data)
1690 size_t tail = smp_load_acquire(&ldata->read_tail);
1692 room = N_TTY_BUF_SIZE - (ldata->read_head - tail);
1694 room = (room + 2) / 3;
1697 overflow = ldata->icanon && ldata->canon_head == tail;
1698 if (overflow && room < 0)
1701 ldata->no_room = flow && !room;
1705 n = min(count, room);
1709 /* ignore parity errors if handling overflow */
1710 if (!overflow || !fp || *fp != TTY_PARITY)
1711 __receive_buf(tty, cp, fp, n);
1718 } while (!test_bit(TTY_LDISC_CHANGING, &tty->flags));
1720 tty->receive_room = room;
1722 /* Unthrottle if handling overflow on pty */
1723 if (tty->driver->type == TTY_DRIVER_TYPE_PTY) {
1725 tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
1726 tty_unthrottle_safe(tty);
1727 __tty_set_flow_change(tty, 0);
1730 n_tty_check_throttle(tty);
1732 up_read(&tty->termios_rwsem);
1737 static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
1738 const char *fp, int count)
1740 n_tty_receive_buf_common(tty, cp, fp, count, 0);
1743 static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
1744 const char *fp, int count)
1746 return n_tty_receive_buf_common(tty, cp, fp, count, 1);
1750 * n_tty_set_termios - termios data changed
1752 * @old: previous data
1754 * Called by the tty layer when the user changes termios flags so that the line
1755 * discipline can plan ahead. This function cannot sleep and is protected from
1756 * re-entry by the tty layer. The user is guaranteed that this function will
1757 * not be re-entered or in progress when the ldisc is closed.
1759 * Locking: Caller holds @tty->termios_rwsem
1761 static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
1763 struct n_tty_data *ldata = tty->disc_data;
1765 if (!old || (old->c_lflag ^ tty->termios.c_lflag) & (ICANON | EXTPROC)) {
1766 bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
1767 ldata->line_start = ldata->read_tail;
1768 if (!L_ICANON(tty) || !read_cnt(ldata)) {
1769 ldata->canon_head = ldata->read_tail;
1772 set_bit((ldata->read_head - 1) & (N_TTY_BUF_SIZE - 1),
1774 ldata->canon_head = ldata->read_head;
1777 ldata->commit_head = ldata->read_head;
1782 ldata->icanon = (L_ICANON(tty) != 0);
1784 if (I_ISTRIP(tty) || I_IUCLC(tty) || I_IGNCR(tty) ||
1785 I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) ||
1786 I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) ||
1788 bitmap_zero(ldata->char_map, 256);
1790 if (I_IGNCR(tty) || I_ICRNL(tty))
1791 set_bit('\r', ldata->char_map);
1793 set_bit('\n', ldata->char_map);
1795 if (L_ICANON(tty)) {
1796 set_bit(ERASE_CHAR(tty), ldata->char_map);
1797 set_bit(KILL_CHAR(tty), ldata->char_map);
1798 set_bit(EOF_CHAR(tty), ldata->char_map);
1799 set_bit('\n', ldata->char_map);
1800 set_bit(EOL_CHAR(tty), ldata->char_map);
1801 if (L_IEXTEN(tty)) {
1802 set_bit(WERASE_CHAR(tty), ldata->char_map);
1803 set_bit(LNEXT_CHAR(tty), ldata->char_map);
1804 set_bit(EOL2_CHAR(tty), ldata->char_map);
1806 set_bit(REPRINT_CHAR(tty),
1811 set_bit(START_CHAR(tty), ldata->char_map);
1812 set_bit(STOP_CHAR(tty), ldata->char_map);
1815 set_bit(INTR_CHAR(tty), ldata->char_map);
1816 set_bit(QUIT_CHAR(tty), ldata->char_map);
1817 set_bit(SUSP_CHAR(tty), ldata->char_map);
1819 clear_bit(__DISABLED_CHAR, ldata->char_map);
1821 ldata->real_raw = 0;
1824 if ((I_IGNBRK(tty) || (!I_BRKINT(tty) && !I_PARMRK(tty))) &&
1825 (I_IGNPAR(tty) || !I_INPCK(tty)) &&
1826 (tty->driver->flags & TTY_DRIVER_REAL_RAW))
1827 ldata->real_raw = 1;
1829 ldata->real_raw = 0;
1832 * Fix tty hang when I_IXON(tty) is cleared, but the tty
1833 * been stopped by STOP_CHAR(tty) before it.
1835 if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow.tco_stopped) {
1837 process_echoes(tty);
1840 /* The termios change make the tty ready for I/O */
1841 wake_up_interruptible(&tty->write_wait);
1842 wake_up_interruptible(&tty->read_wait);
1846 * n_tty_close - close the ldisc for this tty
1849 * Called from the terminal layer when this line discipline is being shut down,
1850 * either because of a close or becsuse of a discipline change. The function
1851 * will not be called while other ldisc methods are in progress.
1853 static void n_tty_close(struct tty_struct *tty)
1855 struct n_tty_data *ldata = tty->disc_data;
1858 n_tty_packet_mode_flush(tty);
1860 down_write(&tty->termios_rwsem);
1862 tty->disc_data = NULL;
1863 up_write(&tty->termios_rwsem);
1867 * n_tty_open - open an ldisc
1868 * @tty: terminal to open
1870 * Called when this line discipline is being attached to the terminal device.
1871 * Can sleep. Called serialized so that no other events will occur in parallel.
1872 * No further open will occur until a close.
1874 static int n_tty_open(struct tty_struct *tty)
1876 struct n_tty_data *ldata;
1878 /* Currently a malloc failure here can panic */
1879 ldata = vzalloc(sizeof(*ldata));
1883 ldata->overrun_time = jiffies;
1884 mutex_init(&ldata->atomic_read_lock);
1885 mutex_init(&ldata->output_lock);
1887 tty->disc_data = ldata;
1889 /* indicate buffer work may resume */
1890 clear_bit(TTY_LDISC_HALTED, &tty->flags);
1891 n_tty_set_termios(tty, NULL);
1892 tty_unthrottle(tty);
1896 static inline int input_available_p(struct tty_struct *tty, int poll)
1898 struct n_tty_data *ldata = tty->disc_data;
1899 int amt = poll && !TIME_CHAR(tty) && MIN_CHAR(tty) ? MIN_CHAR(tty) : 1;
1901 if (ldata->icanon && !L_EXTPROC(tty))
1902 return ldata->canon_head != ldata->read_tail;
1904 return ldata->commit_head - ldata->read_tail >= amt;
1908 * copy_from_read_buf - copy read data directly
1909 * @tty: terminal device
1913 * Helper function to speed up n_tty_read(). It is only called when %ICANON is
1914 * off; it copies characters straight from the tty queue.
1916 * Returns: true if it successfully copied data, but there is still more data
1920 * * called under the @ldata->atomic_read_lock sem
1921 * * n_tty_read()/consumer path:
1922 * caller holds non-exclusive %termios_rwsem;
1923 * read_tail published
1925 static bool copy_from_read_buf(struct tty_struct *tty,
1926 unsigned char **kbp,
1930 struct n_tty_data *ldata = tty->disc_data;
1933 size_t head = smp_load_acquire(&ldata->commit_head);
1934 size_t tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
1936 n = min(head - ldata->read_tail, N_TTY_BUF_SIZE - tail);
1939 unsigned char *from = read_buf_addr(ldata, tail);
1940 memcpy(*kbp, from, n);
1941 is_eof = n == 1 && *from == EOF_CHAR(tty);
1942 tty_audit_add_data(tty, from, n);
1943 zero_buffer(tty, from, n);
1944 smp_store_release(&ldata->read_tail, ldata->read_tail + n);
1945 /* Turn single EOF into zero-length read */
1946 if (L_EXTPROC(tty) && ldata->icanon && is_eof &&
1947 (head == ldata->read_tail))
1952 /* If we have more to copy, let the caller know */
1953 return head != ldata->read_tail;
1959 * canon_copy_from_read_buf - copy read data in canonical mode
1960 * @tty: terminal device
1964 * Helper function for n_tty_read(). It is only called when %ICANON is on; it
1965 * copies one line of input up to and including the line-delimiting character
1966 * into the result buffer.
1968 * Note: When termios is changed from non-canonical to canonical mode and the
1969 * read buffer contains data, n_tty_set_termios() simulates an EOF push (as if
1970 * C-d were input) _without_ the %DISABLED_CHAR in the buffer. This causes data
1971 * already processed as input to be immediately available as input although a
1972 * newline has not been received.
1975 * * called under the %atomic_read_lock mutex
1976 * * n_tty_read()/consumer path:
1977 * caller holds non-exclusive %termios_rwsem;
1978 * read_tail published
1980 static bool canon_copy_from_read_buf(struct tty_struct *tty,
1981 unsigned char **kbp,
1984 struct n_tty_data *ldata = tty->disc_data;
1985 size_t n, size, more, c;
1987 size_t tail, canon_head;
1990 /* N.B. avoid overrun if nr == 0 */
1994 canon_head = smp_load_acquire(&ldata->canon_head);
1995 n = min(*nr, canon_head - ldata->read_tail);
1997 tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
1998 size = min_t(size_t, tail + n, N_TTY_BUF_SIZE);
2000 n_tty_trace("%s: nr:%zu tail:%zu n:%zu size:%zu\n",
2001 __func__, *nr, tail, n, size);
2003 eol = find_next_bit(ldata->read_flags, size, tail);
2004 more = n - (size - tail);
2005 if (eol == N_TTY_BUF_SIZE && more) {
2006 /* scan wrapped without finding set bit */
2007 eol = find_first_bit(ldata->read_flags, more);
2008 found = eol != more;
2010 found = eol != size;
2013 if (n > N_TTY_BUF_SIZE)
2014 n += N_TTY_BUF_SIZE;
2017 if (!found || read_buf(ldata, eol) != __DISABLED_CHAR)
2020 n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu tail:%zu more:%zu\n",
2021 __func__, eol, found, n, c, tail, more);
2023 tty_copy(tty, *kbp, tail, n);
2028 clear_bit(eol, ldata->read_flags);
2029 smp_store_release(&ldata->read_tail, ldata->read_tail + c);
2033 ldata->line_start = ldata->read_tail;
2040 /* No EOL found - do a continuation retry if there is more data */
2041 return ldata->read_tail != canon_head;
2045 * If we finished a read at the exact location of an
2046 * EOF (special EOL character that's a __DISABLED_CHAR)
2047 * in the stream, silently eat the EOF.
2049 static void canon_skip_eof(struct tty_struct *tty)
2051 struct n_tty_data *ldata = tty->disc_data;
2052 size_t tail, canon_head;
2054 canon_head = smp_load_acquire(&ldata->canon_head);
2055 tail = ldata->read_tail;
2058 if (tail == canon_head)
2061 // See if the tail position is EOF in the circular buffer
2062 tail &= (N_TTY_BUF_SIZE - 1);
2063 if (!test_bit(tail, ldata->read_flags))
2065 if (read_buf(ldata, tail) != __DISABLED_CHAR)
2068 // Clear the EOL bit, skip the EOF char.
2069 clear_bit(tail, ldata->read_flags);
2070 smp_store_release(&ldata->read_tail, ldata->read_tail + 1);
2074 * job_control - check job control
2076 * @file: file handle
2078 * Perform job control management checks on this @file/@tty descriptor and if
2079 * appropriate send any needed signals and return a negative error code if
2080 * action should be taken.
2083 * * redirected write test is safe
2084 * * current->signal->tty check is safe
2085 * * ctrl.lock to safely reference @tty->ctrl.pgrp
2087 static int job_control(struct tty_struct *tty, struct file *file)
2089 /* Job control check -- must be done at start and after
2090 every sleep (POSIX.1 7.1.1.4). */
2091 /* NOTE: not yet done after every sleep pending a thorough
2092 check of the logic of this change. -- jlc */
2093 /* don't stop on /dev/console */
2094 if (file->f_op->write_iter == redirected_tty_write)
2097 return __tty_check_change(tty, SIGTTIN);
2102 * n_tty_read - read function for tty
2104 * @file: file object
2105 * @kbuf: kernelspace buffer pointer
2107 * @cookie: if non-%NULL, this is a continuation read
2108 * @offset: where to continue reading from (unused in n_tty)
2110 * Perform reads for the line discipline. We are guaranteed that the line
2111 * discipline will not be closed under us but we may get multiple parallel
2112 * readers and must handle this ourselves. We may also get a hangup. Always
2113 * called in user context, may sleep.
2115 * This code must be sure never to sleep through a hangup.
2117 * Locking: n_tty_read()/consumer path:
2118 * claims non-exclusive termios_rwsem;
2119 * publishes read_tail
2121 static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
2122 unsigned char *kbuf, size_t nr,
2123 void **cookie, unsigned long offset)
2125 struct n_tty_data *ldata = tty->disc_data;
2126 unsigned char *kb = kbuf;
2127 DEFINE_WAIT_FUNC(wait, woken_wake_function);
2136 * Is this a continuation of a read started earler?
2138 * If so, we still hold the atomic_read_lock and the
2139 * termios_rwsem, and can just continue to copy data.
2142 if (ldata->icanon && !L_EXTPROC(tty)) {
2144 * If we have filled the user buffer, see
2145 * if we should skip an EOF character before
2146 * releasing the lock and returning done.
2149 canon_skip_eof(tty);
2150 else if (canon_copy_from_read_buf(tty, &kb, &nr))
2153 if (copy_from_read_buf(tty, &kb, &nr))
2157 /* No more data - release locks and stop retries */
2158 n_tty_kick_worker(tty);
2159 n_tty_check_unthrottle(tty);
2160 up_read(&tty->termios_rwsem);
2161 mutex_unlock(&ldata->atomic_read_lock);
2166 c = job_control(tty, file);
2171 * Internal serialization of reads.
2173 if (file->f_flags & O_NONBLOCK) {
2174 if (!mutex_trylock(&ldata->atomic_read_lock))
2177 if (mutex_lock_interruptible(&ldata->atomic_read_lock))
2178 return -ERESTARTSYS;
2181 down_read(&tty->termios_rwsem);
2184 timeout = MAX_SCHEDULE_TIMEOUT;
2185 if (!ldata->icanon) {
2186 minimum = MIN_CHAR(tty);
2188 time = (HZ / 10) * TIME_CHAR(tty);
2190 timeout = (HZ / 10) * TIME_CHAR(tty);
2195 packet = tty->ctrl.packet;
2196 tail = ldata->read_tail;
2198 add_wait_queue(&tty->read_wait, &wait);
2200 /* First test for status change. */
2201 if (packet && tty->link->ctrl.pktstatus) {
2205 spin_lock_irq(&tty->link->ctrl.lock);
2206 cs = tty->link->ctrl.pktstatus;
2207 tty->link->ctrl.pktstatus = 0;
2208 spin_unlock_irq(&tty->link->ctrl.lock);
2214 if (!input_available_p(tty, 0)) {
2215 up_read(&tty->termios_rwsem);
2216 tty_buffer_flush_work(tty->port);
2217 down_read(&tty->termios_rwsem);
2218 if (!input_available_p(tty, 0)) {
2219 if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
2223 if (tty_hung_up_p(file))
2226 * Abort readers for ttys which never actually
2227 * get hung up. See __tty_hangup().
2229 if (test_bit(TTY_HUPPING, &tty->flags))
2233 if (tty_io_nonblock(tty, file)) {
2237 if (signal_pending(current)) {
2238 retval = -ERESTARTSYS;
2241 up_read(&tty->termios_rwsem);
2243 timeout = wait_woken(&wait, TASK_INTERRUPTIBLE,
2246 down_read(&tty->termios_rwsem);
2251 if (ldata->icanon && !L_EXTPROC(tty)) {
2252 if (canon_copy_from_read_buf(tty, &kb, &nr))
2253 goto more_to_be_read;
2255 /* Deal with packet mode. */
2256 if (packet && kb == kbuf) {
2257 *kb++ = TIOCPKT_DATA;
2262 * Copy data, and if there is more to be had
2263 * and we have nothing more to wait for, then
2264 * let's mark us for retries.
2266 * NOTE! We return here with both the termios_sem
2267 * and atomic_read_lock still held, the retries
2268 * will release them when done.
2270 if (copy_from_read_buf(tty, &kb, &nr) && kb - kbuf >= minimum) {
2272 remove_wait_queue(&tty->read_wait, &wait);
2278 n_tty_check_unthrottle(tty);
2280 if (kb - kbuf >= minimum)
2285 if (tail != ldata->read_tail)
2286 n_tty_kick_worker(tty);
2287 up_read(&tty->termios_rwsem);
2289 remove_wait_queue(&tty->read_wait, &wait);
2290 mutex_unlock(&ldata->atomic_read_lock);
2299 * n_tty_write - write function for tty
2301 * @file: file object
2302 * @buf: userspace buffer pointer
2305 * Write function of the terminal device. This is serialized with respect to
2306 * other write callers but not to termios changes, reads and other such events.
2307 * Since the receive code will echo characters, thus calling driver write
2308 * methods, the %output_lock is used in the output processing functions called
2309 * here as well as in the echo processing function to protect the column state
2310 * and space left in the buffer.
2312 * This code must be sure never to sleep through a hangup.
2314 * Locking: output_lock to protect column state and space left
2315 * (note that the process_output*() functions take this lock themselves)
2318 static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
2319 const unsigned char *buf, size_t nr)
2321 const unsigned char *b = buf;
2322 DEFINE_WAIT_FUNC(wait, woken_wake_function);
2326 /* Job control check -- must be done at start (POSIX.1 7.1.1.4). */
2327 if (L_TOSTOP(tty) && file->f_op->write_iter != redirected_tty_write) {
2328 retval = tty_check_change(tty);
2333 down_read(&tty->termios_rwsem);
2335 /* Write out any echoed characters that are still pending */
2336 process_echoes(tty);
2338 add_wait_queue(&tty->write_wait, &wait);
2340 if (signal_pending(current)) {
2341 retval = -ERESTARTSYS;
2344 if (tty_hung_up_p(file) || (tty->link && !tty->link->count)) {
2350 ssize_t num = process_output_block(tty, b, nr);
2362 if (process_output(c, tty) < 0)
2366 if (tty->ops->flush_chars)
2367 tty->ops->flush_chars(tty);
2369 struct n_tty_data *ldata = tty->disc_data;
2372 mutex_lock(&ldata->output_lock);
2373 c = tty->ops->write(tty, b, nr);
2374 mutex_unlock(&ldata->output_lock);
2387 if (tty_io_nonblock(tty, file)) {
2391 up_read(&tty->termios_rwsem);
2393 wait_woken(&wait, TASK_INTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
2395 down_read(&tty->termios_rwsem);
2398 remove_wait_queue(&tty->write_wait, &wait);
2399 if (nr && tty->fasync)
2400 set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
2401 up_read(&tty->termios_rwsem);
2402 return (b - buf) ? b - buf : retval;
2406 * n_tty_poll - poll method for N_TTY
2407 * @tty: terminal device
2408 * @file: file accessing it
2411 * Called when the line discipline is asked to poll() for data or for special
2412 * events. This code is not serialized with respect to other events save
2415 * This code must be sure never to sleep through a hangup.
2417 * Locking: called without the kernel lock held -- fine.
2419 static __poll_t n_tty_poll(struct tty_struct *tty, struct file *file,
2424 poll_wait(file, &tty->read_wait, wait);
2425 poll_wait(file, &tty->write_wait, wait);
2426 if (input_available_p(tty, 1))
2427 mask |= EPOLLIN | EPOLLRDNORM;
2429 tty_buffer_flush_work(tty->port);
2430 if (input_available_p(tty, 1))
2431 mask |= EPOLLIN | EPOLLRDNORM;
2433 if (tty->ctrl.packet && tty->link->ctrl.pktstatus)
2434 mask |= EPOLLPRI | EPOLLIN | EPOLLRDNORM;
2435 if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
2437 if (tty_hung_up_p(file))
2439 if (tty->ops->write && !tty_is_writelocked(tty) &&
2440 tty_chars_in_buffer(tty) < WAKEUP_CHARS &&
2441 tty_write_room(tty) > 0)
2442 mask |= EPOLLOUT | EPOLLWRNORM;
2446 static unsigned long inq_canon(struct n_tty_data *ldata)
2448 size_t nr, head, tail;
2450 if (ldata->canon_head == ldata->read_tail)
2452 head = ldata->canon_head;
2453 tail = ldata->read_tail;
2455 /* Skip EOF-chars.. */
2456 while (MASK(head) != MASK(tail)) {
2457 if (test_bit(tail & (N_TTY_BUF_SIZE - 1), ldata->read_flags) &&
2458 read_buf(ldata, tail) == __DISABLED_CHAR)
2465 static int n_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
2468 struct n_tty_data *ldata = tty->disc_data;
2473 return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
2475 down_write(&tty->termios_rwsem);
2476 if (L_ICANON(tty) && !L_EXTPROC(tty))
2477 retval = inq_canon(ldata);
2479 retval = read_cnt(ldata);
2480 up_write(&tty->termios_rwsem);
2481 return put_user(retval, (unsigned int __user *) arg);
2483 return n_tty_ioctl_helper(tty, cmd, arg);
2487 static struct tty_ldisc_ops n_tty_ops = {
2488 .owner = THIS_MODULE,
2492 .close = n_tty_close,
2493 .flush_buffer = n_tty_flush_buffer,
2495 .write = n_tty_write,
2496 .ioctl = n_tty_ioctl,
2497 .set_termios = n_tty_set_termios,
2499 .receive_buf = n_tty_receive_buf,
2500 .write_wakeup = n_tty_write_wakeup,
2501 .receive_buf2 = n_tty_receive_buf2,
2502 .lookahead_buf = n_tty_lookahead_flow_ctrl,
2506 * n_tty_inherit_ops - inherit N_TTY methods
2507 * @ops: struct tty_ldisc_ops where to save N_TTY methods
2509 * Enables a 'subclass' line discipline to 'inherit' N_TTY methods.
2512 void n_tty_inherit_ops(struct tty_ldisc_ops *ops)
2517 EXPORT_SYMBOL_GPL(n_tty_inherit_ops);
2519 void __init n_tty_init(void)
2521 tty_register_ldisc(&n_tty_ops);