2 * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit)
4 * Copyright (C) 2011 Samsung Electronics
5 * Donggeun Kim <dg77.kim@samsung.com>
6 * Amit Daniel Kachhap <amit.kachhap@linaro.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/clk.h>
26 #include <linux/interrupt.h>
27 #include <linux/module.h>
29 #include <linux/of_address.h>
30 #include <linux/of_irq.h>
31 #include <linux/platform_device.h>
32 #include <linux/regulator/consumer.h>
34 #include "exynos_thermal_common.h"
35 #include "exynos_tmu.h"
36 #include "exynos_tmu_data.h"
39 * struct exynos_tmu_data : A structure to hold the private data of the TMU
41 * @id: identifier of the one instance of the TMU controller.
42 * @pdata: pointer to the tmu platform/configuration data
43 * @base: base address of the single instance of the TMU controller.
44 * @base_second: base address of the common registers of the TMU controller.
45 * @irq: irq number of the TMU controller.
46 * @soc: id of the SOC type.
47 * @irq_work: pointer to the irq work structure.
48 * @lock: lock to implement synchronization.
49 * @clk: pointer to the clock structure.
50 * @clk_sec: pointer to the clock structure for accessing the base_second.
51 * @temp_error1: fused value of the first point trim.
52 * @temp_error2: fused value of the second point trim.
53 * @regulator: pointer to the TMU regulator structure.
54 * @reg_conf: pointer to structure to register with core thermal.
56 struct exynos_tmu_data {
58 struct exynos_tmu_platform_data *pdata;
60 void __iomem *base_second;
63 struct work_struct irq_work;
65 struct clk *clk, *clk_sec;
66 u8 temp_error1, temp_error2;
67 struct regulator *regulator;
68 struct thermal_sensor_conf *reg_conf;
72 * TMU treats temperature as a mapped temperature code.
73 * The temperature is converted differently depending on the calibration type.
75 static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
77 struct exynos_tmu_platform_data *pdata = data->pdata;
80 switch (pdata->cal_type) {
81 case TYPE_TWO_POINT_TRIMMING:
82 temp_code = (temp - pdata->first_point_trim) *
83 (data->temp_error2 - data->temp_error1) /
84 (pdata->second_point_trim - pdata->first_point_trim) +
87 case TYPE_ONE_POINT_TRIMMING:
88 temp_code = temp + data->temp_error1 - pdata->first_point_trim;
91 temp_code = temp + pdata->default_temp_offset;
99 * Calculate a temperature value from a temperature code.
100 * The unit of the temperature is degree Celsius.
102 static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
104 struct exynos_tmu_platform_data *pdata = data->pdata;
107 switch (pdata->cal_type) {
108 case TYPE_TWO_POINT_TRIMMING:
109 temp = (temp_code - data->temp_error1) *
110 (pdata->second_point_trim - pdata->first_point_trim) /
111 (data->temp_error2 - data->temp_error1) +
112 pdata->first_point_trim;
114 case TYPE_ONE_POINT_TRIMMING:
115 temp = temp_code - data->temp_error1 + pdata->first_point_trim;
118 temp = temp_code - pdata->default_temp_offset;
125 static void exynos_tmu_clear_irqs(struct exynos_tmu_data *data)
127 const struct exynos_tmu_registers *reg = data->pdata->registers;
128 unsigned int val_irq;
130 val_irq = readl(data->base + reg->tmu_intstat);
132 * Clear the interrupts. Please note that the documentation for
133 * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
134 * states that INTCLEAR register has a different placing of bits
135 * responsible for FALL IRQs than INTSTAT register. Exynos5420
136 * and Exynos5440 documentation is correct (Exynos4210 doesn't
137 * support FALL IRQs at all).
139 writel(val_irq, data->base + reg->tmu_intclear);
142 static int exynos_tmu_initialize(struct platform_device *pdev)
144 struct exynos_tmu_data *data = platform_get_drvdata(pdev);
145 struct exynos_tmu_platform_data *pdata = data->pdata;
146 const struct exynos_tmu_registers *reg = pdata->registers;
147 unsigned int status, trim_info = 0, con, ctrl;
148 unsigned int rising_threshold = 0, falling_threshold = 0;
149 int ret = 0, threshold_code, i;
151 mutex_lock(&data->lock);
152 clk_enable(data->clk);
153 if (!IS_ERR(data->clk_sec))
154 clk_enable(data->clk_sec);
156 if (TMU_SUPPORTS(pdata, READY_STATUS)) {
157 status = readb(data->base + reg->tmu_status);
164 if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
165 for (i = 0; i < reg->triminfo_ctrl_count; i++) {
166 if (pdata->triminfo_reload[i]) {
167 ctrl = readl(data->base +
168 reg->triminfo_ctrl[i]);
169 ctrl |= pdata->triminfo_reload[i];
170 writel(ctrl, data->base +
171 reg->triminfo_ctrl[i]);
176 /* Save trimming info in order to perform calibration */
177 if (data->soc == SOC_ARCH_EXYNOS5440) {
179 * For exynos5440 soc triminfo value is swapped between TMU0 and
180 * TMU2, so the below logic is needed.
184 trim_info = readl(data->base +
185 EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
188 trim_info = readl(data->base + reg->triminfo_data);
191 trim_info = readl(data->base -
192 EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
195 /* On exynos5420 the triminfo register is in the shared space */
196 if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
197 trim_info = readl(data->base_second +
200 trim_info = readl(data->base + reg->triminfo_data);
202 data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
203 data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
204 EXYNOS_TMU_TEMP_MASK);
206 if (!data->temp_error1 ||
207 (pdata->min_efuse_value > data->temp_error1) ||
208 (data->temp_error1 > pdata->max_efuse_value))
209 data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
211 if (!data->temp_error2)
213 (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
214 EXYNOS_TMU_TEMP_MASK;
216 rising_threshold = readl(data->base + reg->threshold_th0);
218 if (data->soc == SOC_ARCH_EXYNOS4210) {
219 /* Write temperature code for threshold */
220 threshold_code = temp_to_code(data, pdata->threshold);
221 writeb(threshold_code,
222 data->base + reg->threshold_temp);
223 for (i = 0; i < pdata->non_hw_trigger_levels; i++)
224 writeb(pdata->trigger_levels[i], data->base +
225 reg->threshold_th0 + i * sizeof(reg->threshold_th0));
227 exynos_tmu_clear_irqs(data);
229 /* Write temperature code for rising and falling threshold */
230 for (i = 0; i < pdata->non_hw_trigger_levels; i++) {
231 threshold_code = temp_to_code(data,
232 pdata->trigger_levels[i]);
233 rising_threshold &= ~(0xff << 8 * i);
234 rising_threshold |= threshold_code << 8 * i;
235 if (pdata->threshold_falling) {
236 threshold_code = temp_to_code(data,
237 pdata->trigger_levels[i] -
238 pdata->threshold_falling);
239 falling_threshold |= threshold_code << 8 * i;
243 writel(rising_threshold,
244 data->base + reg->threshold_th0);
245 writel(falling_threshold,
246 data->base + reg->threshold_th1);
248 exynos_tmu_clear_irqs(data);
250 /* if last threshold limit is also present */
251 i = pdata->max_trigger_level - 1;
252 if (pdata->trigger_levels[i] &&
253 (pdata->trigger_type[i] == HW_TRIP)) {
254 threshold_code = temp_to_code(data,
255 pdata->trigger_levels[i]);
256 if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
257 /* 1-4 level to be assigned in th0 reg */
258 rising_threshold &= ~(0xff << 8 * i);
259 rising_threshold |= threshold_code << 8 * i;
260 writel(rising_threshold,
261 data->base + reg->threshold_th0);
262 } else if (i == EXYNOS_MAX_TRIGGER_PER_REG) {
263 /* 5th level to be assigned in th2 reg */
265 threshold_code << reg->threshold_th3_l0_shift;
266 writel(rising_threshold,
267 data->base + reg->threshold_th2);
269 con = readl(data->base + reg->tmu_ctrl);
270 con |= (1 << reg->therm_trip_en_shift);
271 writel(con, data->base + reg->tmu_ctrl);
274 /*Clear the PMIN in the common TMU register*/
275 if (reg->tmu_pmin && !data->id)
276 writel(0, data->base_second + reg->tmu_pmin);
278 clk_disable(data->clk);
279 mutex_unlock(&data->lock);
280 if (!IS_ERR(data->clk_sec))
281 clk_disable(data->clk_sec);
286 static void exynos_tmu_control(struct platform_device *pdev, bool on)
288 struct exynos_tmu_data *data = platform_get_drvdata(pdev);
289 struct exynos_tmu_platform_data *pdata = data->pdata;
290 const struct exynos_tmu_registers *reg = pdata->registers;
291 unsigned int con, interrupt_en;
293 mutex_lock(&data->lock);
294 clk_enable(data->clk);
296 con = readl(data->base + reg->tmu_ctrl);
299 con |= (pdata->test_mux << reg->test_mux_addr_shift);
301 con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
302 con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
304 con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
305 con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
307 if (pdata->noise_cancel_mode) {
308 con &= ~(reg->therm_trip_mode_mask <<
309 reg->therm_trip_mode_shift);
310 con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
314 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
316 pdata->trigger_enable[3] << reg->inten_rise3_shift |
317 pdata->trigger_enable[2] << reg->inten_rise2_shift |
318 pdata->trigger_enable[1] << reg->inten_rise1_shift |
319 pdata->trigger_enable[0] << reg->inten_rise0_shift;
320 if (TMU_SUPPORTS(pdata, FALLING_TRIP))
322 interrupt_en << reg->inten_fall0_shift;
324 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
325 interrupt_en = 0; /* Disable all interrupts */
327 writel(interrupt_en, data->base + reg->tmu_inten);
328 writel(con, data->base + reg->tmu_ctrl);
330 clk_disable(data->clk);
331 mutex_unlock(&data->lock);
334 static int exynos_tmu_read(struct exynos_tmu_data *data)
336 struct exynos_tmu_platform_data *pdata = data->pdata;
337 const struct exynos_tmu_registers *reg = pdata->registers;
341 mutex_lock(&data->lock);
342 clk_enable(data->clk);
344 temp_code = readb(data->base + reg->tmu_cur_temp);
346 if (data->soc == SOC_ARCH_EXYNOS4210)
347 /* temp_code should range between 75 and 175 */
348 if (temp_code < 75 || temp_code > 175) {
353 temp = code_to_temp(data, temp_code);
355 clk_disable(data->clk);
356 mutex_unlock(&data->lock);
361 #ifdef CONFIG_THERMAL_EMULATION
362 static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
364 struct exynos_tmu_data *data = drv_data;
365 struct exynos_tmu_platform_data *pdata = data->pdata;
366 const struct exynos_tmu_registers *reg = pdata->registers;
370 if (!TMU_SUPPORTS(pdata, EMULATION))
373 if (temp && temp < MCELSIUS)
376 mutex_lock(&data->lock);
377 clk_enable(data->clk);
379 val = readl(data->base + reg->emul_con);
384 if (TMU_SUPPORTS(pdata, EMUL_TIME)) {
385 val &= ~(EXYNOS_EMUL_TIME_MASK << reg->emul_time_shift);
386 val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift);
388 val &= ~(EXYNOS_EMUL_DATA_MASK << reg->emul_temp_shift);
389 val |= (temp_to_code(data, temp) << reg->emul_temp_shift) |
392 val &= ~EXYNOS_EMUL_ENABLE;
395 writel(val, data->base + reg->emul_con);
397 clk_disable(data->clk);
398 mutex_unlock(&data->lock);
404 static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
406 #endif/*CONFIG_THERMAL_EMULATION*/
408 static void exynos_tmu_work(struct work_struct *work)
410 struct exynos_tmu_data *data = container_of(work,
411 struct exynos_tmu_data, irq_work);
412 struct exynos_tmu_platform_data *pdata = data->pdata;
413 const struct exynos_tmu_registers *reg = pdata->registers;
414 unsigned int val_type;
416 if (!IS_ERR(data->clk_sec))
417 clk_enable(data->clk_sec);
418 /* Find which sensor generated this interrupt */
419 if (reg->tmu_irqstatus) {
420 val_type = readl(data->base_second + reg->tmu_irqstatus);
421 if (!((val_type >> data->id) & 0x1))
424 if (!IS_ERR(data->clk_sec))
425 clk_disable(data->clk_sec);
427 exynos_report_trigger(data->reg_conf);
428 mutex_lock(&data->lock);
429 clk_enable(data->clk);
431 /* TODO: take action based on particular interrupt */
432 exynos_tmu_clear_irqs(data);
434 clk_disable(data->clk);
435 mutex_unlock(&data->lock);
437 enable_irq(data->irq);
440 static irqreturn_t exynos_tmu_irq(int irq, void *id)
442 struct exynos_tmu_data *data = id;
444 disable_irq_nosync(irq);
445 schedule_work(&data->irq_work);
450 static const struct of_device_id exynos_tmu_match[] = {
452 .compatible = "samsung,exynos3250-tmu",
453 .data = (void *)EXYNOS3250_TMU_DRV_DATA,
456 .compatible = "samsung,exynos4210-tmu",
457 .data = (void *)EXYNOS4210_TMU_DRV_DATA,
460 .compatible = "samsung,exynos4412-tmu",
461 .data = (void *)EXYNOS4412_TMU_DRV_DATA,
464 .compatible = "samsung,exynos5250-tmu",
465 .data = (void *)EXYNOS5250_TMU_DRV_DATA,
468 .compatible = "samsung,exynos5260-tmu",
469 .data = (void *)EXYNOS5260_TMU_DRV_DATA,
472 .compatible = "samsung,exynos5420-tmu",
473 .data = (void *)EXYNOS5420_TMU_DRV_DATA,
476 .compatible = "samsung,exynos5420-tmu-ext-triminfo",
477 .data = (void *)EXYNOS5420_TMU_DRV_DATA,
480 .compatible = "samsung,exynos5440-tmu",
481 .data = (void *)EXYNOS5440_TMU_DRV_DATA,
485 MODULE_DEVICE_TABLE(of, exynos_tmu_match);
487 static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
488 struct platform_device *pdev, int id)
490 struct exynos_tmu_init_data *data_table;
491 struct exynos_tmu_platform_data *tmu_data;
492 const struct of_device_id *match;
494 match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
497 data_table = (struct exynos_tmu_init_data *) match->data;
498 if (!data_table || id >= data_table->tmu_count)
500 tmu_data = data_table->tmu_data;
501 return (struct exynos_tmu_platform_data *) (tmu_data + id);
504 static int exynos_map_dt_data(struct platform_device *pdev)
506 struct exynos_tmu_data *data = platform_get_drvdata(pdev);
507 struct exynos_tmu_platform_data *pdata;
511 if (!data || !pdev->dev.of_node)
515 * Try enabling the regulator if found
516 * TODO: Add regulator as an SOC feature, so that regulator enable
517 * is a compulsory call.
519 data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
520 if (!IS_ERR(data->regulator)) {
521 ret = regulator_enable(data->regulator);
523 dev_err(&pdev->dev, "failed to enable vtmu\n");
527 dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
530 data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
534 data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
535 if (data->irq <= 0) {
536 dev_err(&pdev->dev, "failed to get IRQ\n");
540 if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
541 dev_err(&pdev->dev, "failed to get Resource 0\n");
545 data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
547 dev_err(&pdev->dev, "Failed to ioremap memory\n");
548 return -EADDRNOTAVAIL;
551 pdata = exynos_get_driver_data(pdev, data->id);
553 dev_err(&pdev->dev, "No platform init data supplied.\n");
558 * Check if the TMU shares some registers and then try to map the
559 * memory of common registers.
561 if (!TMU_SUPPORTS(pdata, ADDRESS_MULTIPLE))
564 if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
565 dev_err(&pdev->dev, "failed to get Resource 1\n");
569 data->base_second = devm_ioremap(&pdev->dev, res.start,
570 resource_size(&res));
571 if (!data->base_second) {
572 dev_err(&pdev->dev, "Failed to ioremap memory\n");
579 static int exynos_tmu_probe(struct platform_device *pdev)
581 struct exynos_tmu_data *data;
582 struct exynos_tmu_platform_data *pdata;
583 struct thermal_sensor_conf *sensor_conf;
586 data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
591 platform_set_drvdata(pdev, data);
592 mutex_init(&data->lock);
594 ret = exynos_map_dt_data(pdev);
600 INIT_WORK(&data->irq_work, exynos_tmu_work);
602 data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
603 if (IS_ERR(data->clk)) {
604 dev_err(&pdev->dev, "Failed to get clock\n");
605 return PTR_ERR(data->clk);
608 data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif");
609 if (IS_ERR(data->clk_sec)) {
610 if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
611 dev_err(&pdev->dev, "Failed to get triminfo clock\n");
612 return PTR_ERR(data->clk_sec);
615 ret = clk_prepare(data->clk_sec);
617 dev_err(&pdev->dev, "Failed to get clock\n");
622 ret = clk_prepare(data->clk);
624 dev_err(&pdev->dev, "Failed to get clock\n");
628 if (pdata->type == SOC_ARCH_EXYNOS3250 ||
629 pdata->type == SOC_ARCH_EXYNOS4210 ||
630 pdata->type == SOC_ARCH_EXYNOS4412 ||
631 pdata->type == SOC_ARCH_EXYNOS5250 ||
632 pdata->type == SOC_ARCH_EXYNOS5260 ||
633 pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO ||
634 pdata->type == SOC_ARCH_EXYNOS5440)
635 data->soc = pdata->type;
638 dev_err(&pdev->dev, "Platform not supported\n");
642 ret = exynos_tmu_initialize(pdev);
644 dev_err(&pdev->dev, "Failed to initialize TMU\n");
648 exynos_tmu_control(pdev, true);
650 /* Allocate a structure to register with the exynos core thermal */
651 sensor_conf = devm_kzalloc(&pdev->dev,
652 sizeof(struct thermal_sensor_conf), GFP_KERNEL);
657 sprintf(sensor_conf->name, "therm_zone%d", data->id);
658 sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read;
659 sensor_conf->write_emul_temp =
660 (int (*)(void *, unsigned long))exynos_tmu_set_emulation;
661 sensor_conf->driver_data = data;
662 sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] +
663 pdata->trigger_enable[1] + pdata->trigger_enable[2]+
664 pdata->trigger_enable[3];
666 for (i = 0; i < sensor_conf->trip_data.trip_count; i++) {
667 sensor_conf->trip_data.trip_val[i] =
668 pdata->threshold + pdata->trigger_levels[i];
669 sensor_conf->trip_data.trip_type[i] =
670 pdata->trigger_type[i];
673 sensor_conf->trip_data.trigger_falling = pdata->threshold_falling;
675 sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count;
676 for (i = 0; i < pdata->freq_tab_count; i++) {
677 sensor_conf->cooling_data.freq_data[i].freq_clip_max =
678 pdata->freq_tab[i].freq_clip_max;
679 sensor_conf->cooling_data.freq_data[i].temp_level =
680 pdata->freq_tab[i].temp_level;
682 sensor_conf->dev = &pdev->dev;
683 /* Register the sensor with thermal management interface */
684 ret = exynos_register_thermal(sensor_conf);
686 dev_err(&pdev->dev, "Failed to register thermal interface\n");
689 data->reg_conf = sensor_conf;
691 ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
692 IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
694 dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
700 clk_unprepare(data->clk);
702 if (!IS_ERR(data->clk_sec))
703 clk_unprepare(data->clk_sec);
707 static int exynos_tmu_remove(struct platform_device *pdev)
709 struct exynos_tmu_data *data = platform_get_drvdata(pdev);
711 exynos_unregister_thermal(data->reg_conf);
713 exynos_tmu_control(pdev, false);
715 clk_unprepare(data->clk);
716 if (!IS_ERR(data->clk_sec))
717 clk_unprepare(data->clk_sec);
719 if (!IS_ERR(data->regulator))
720 regulator_disable(data->regulator);
725 #ifdef CONFIG_PM_SLEEP
726 static int exynos_tmu_suspend(struct device *dev)
728 exynos_tmu_control(to_platform_device(dev), false);
733 static int exynos_tmu_resume(struct device *dev)
735 struct platform_device *pdev = to_platform_device(dev);
737 exynos_tmu_initialize(pdev);
738 exynos_tmu_control(pdev, true);
743 static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
744 exynos_tmu_suspend, exynos_tmu_resume);
745 #define EXYNOS_TMU_PM (&exynos_tmu_pm)
747 #define EXYNOS_TMU_PM NULL
750 static struct platform_driver exynos_tmu_driver = {
752 .name = "exynos-tmu",
754 .of_match_table = exynos_tmu_match,
756 .probe = exynos_tmu_probe,
757 .remove = exynos_tmu_remove,
760 module_platform_driver(exynos_tmu_driver);
762 MODULE_DESCRIPTION("EXYNOS TMU Driver");
763 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
764 MODULE_LICENSE("GPL");
765 MODULE_ALIAS("platform:exynos-tmu");