drivers/scsi/ses.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * SCSI Enclosure Services
   4  *
   5  * Copyright (C) 2008 James Bottomley <James.Bottomley@HansenPartnership.com>
   6  */
   7
   8 #include <linux/slab.h>
   9 #include <linux/module.h>
  10 #include <linux/kernel.h>
  11 #include <linux/enclosure.h>
  12 #include <asm/unaligned.h>
  13
  14 #include <scsi/scsi.h>
  15 #include <scsi/scsi_cmnd.h>
  16 #include <scsi/scsi_dbg.h>
  17 #include <scsi/scsi_device.h>
  18 #include <scsi/scsi_driver.h>
  19 #include <scsi/scsi_host.h>
  20
  21 #include <scsi/scsi_transport_sas.h>
  22
  23 struct ses_device {
  24         unsigned char *page1;
  25         unsigned char *page1_types;
  26         unsigned char *page2;
  27         unsigned char *page10;
  28         short page1_len;
  29         short page1_num_types;
  30         short page2_len;
  31         short page10_len;
  32 };
  33
  34 struct ses_component {
  35         u64 addr;
  36 };
  37
  38 static bool ses_page2_supported(struct enclosure_device *edev)
  39 {
  40         struct ses_device *ses_dev = edev->scratch;
  41
  42         return (ses_dev->page2 != NULL);
  43 }
  44
  45 static int ses_probe(struct device *dev)
  46 {
  47         struct scsi_device *sdev = to_scsi_device(dev);
  48         int err = -ENODEV;
  49
  50         if (sdev->type != TYPE_ENCLOSURE)
  51                 goto out;
  52
  53         err = 0;
  54         sdev_printk(KERN_NOTICE, sdev, "Attached Enclosure device\n");
  55
  56  out:
  57         return err;
  58 }
  59
  60 #define SES_TIMEOUT (30 * HZ)
  61 #define SES_RETRIES 3
  62
  63 static void init_device_slot_control(unsigned char *dest_desc,
  64                                      struct enclosure_component *ecomp,
  65                                      unsigned char *status)
  66 {
  67         memcpy(dest_desc, status, 4);
  68         dest_desc[0] = 0;
  69         /* only clear byte 1 for ENCLOSURE_COMPONENT_DEVICE */
  70         if (ecomp->type == ENCLOSURE_COMPONENT_DEVICE)
  71                 dest_desc[1] = 0;
  72         dest_desc[2] &= 0xde;
  73         dest_desc[3] &= 0x3c;
  74 }
  75
  76
  77 static int ses_recv_diag(struct scsi_device *sdev, int page_code,
  78                          void *buf, int bufflen)
  79 {
  80         int ret;
  81         unsigned char cmd[] = {
  82                 RECEIVE_DIAGNOSTIC,
  83                 1,              /* Set PCV bit */
  84                 page_code,
  85                 bufflen >> 8,
  86                 bufflen & 0xff,
  87                 0
  88         };
  89         unsigned char recv_page_code;
  90         struct scsi_failure failure_defs[] = {
  91                 {
  92                         .sense = UNIT_ATTENTION,
  93                         .asc = 0x29,
  94                         .ascq = SCMD_FAILURE_ASCQ_ANY,
  95                         .allowed = SES_RETRIES,
  96                         .result = SAM_STAT_CHECK_CONDITION,
  97                 },
  98                 {
  99                         .sense = NOT_READY,
 100                         .asc = SCMD_FAILURE_ASC_ANY,
 101                         .ascq = SCMD_FAILURE_ASCQ_ANY,
 102                         .allowed = SES_RETRIES,
 103                         .result = SAM_STAT_CHECK_CONDITION,
 104                 },
 105                 {}
 106         };
 107         struct scsi_failures failures = {
 108                 .failure_definitions = failure_defs,
 109         };
 110         const struct scsi_exec_args exec_args = {
 111                 .failures = &failures,
 112         };
 113
 114         ret = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_IN, buf, bufflen,
 115                                SES_TIMEOUT, 1, &exec_args);
 116         if (unlikely(ret))
 117                 return ret;
 118
 119         recv_page_code = ((unsigned char *)buf)[0];
 120
 121         if (likely(recv_page_code == page_code))
 122                 return ret;
 123
 124         /* successful diagnostic but wrong page code.  This happens to some
 125          * USB devices, just print a message and pretend there was an error */
 126
 127         sdev_printk(KERN_ERR, sdev,
 128                     "Wrong diagnostic page; asked for %d got %u\n",
 129                     page_code, recv_page_code);
 130
 131         return -EINVAL;
 132 }
 133
 134 static int ses_send_diag(struct scsi_device *sdev, int page_code,
 135                          void *buf, int bufflen)
 136 {
 137         int result;
 138
 139         unsigned char cmd[] = {
 140                 SEND_DIAGNOSTIC,
 141                 0x10,           /* Set PF bit */
 142                 0,
 143                 bufflen >> 8,
 144                 bufflen & 0xff,
 145                 0
 146         };
 147         struct scsi_failure failure_defs[] = {
 148                 {
 149                         .sense = UNIT_ATTENTION,
 150                         .asc = 0x29,
 151                         .ascq = SCMD_FAILURE_ASCQ_ANY,
 152                         .allowed = SES_RETRIES,
 153                         .result = SAM_STAT_CHECK_CONDITION,
 154                 },
 155                 {
 156                         .sense = NOT_READY,
 157                         .asc = SCMD_FAILURE_ASC_ANY,
 158                         .ascq = SCMD_FAILURE_ASCQ_ANY,
 159                         .allowed = SES_RETRIES,
 160                         .result = SAM_STAT_CHECK_CONDITION,
 161                 },
 162                 {}
 163         };
 164         struct scsi_failures failures = {
 165                 .failure_definitions = failure_defs,
 166         };
 167         const struct scsi_exec_args exec_args = {
 168                 .failures = &failures,
 169         };
 170
 171         result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_OUT, buf, bufflen,
 172                                   SES_TIMEOUT, 1, &exec_args);
 173         if (result)
 174                 sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n",
 175                             result);
 176         return result;
 177 }
 178
 179 static int ses_set_page2_descriptor(struct enclosure_device *edev,
 180                                       struct enclosure_component *ecomp,
 181                                       unsigned char *desc)
 182 {
 183         int i, j, count = 0, descriptor = ecomp->number;
 184         struct scsi_device *sdev = to_scsi_device(edev->edev.parent);
 185         struct ses_device *ses_dev = edev->scratch;
 186         unsigned char *type_ptr = ses_dev->page1_types;
 187         unsigned char *desc_ptr = ses_dev->page2 + 8;
 188
 189         /* Clear everything */
 190         memset(desc_ptr, 0, ses_dev->page2_len - 8);
 191         for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) {
 192                 for (j = 0; j < type_ptr[1]; j++) {
 193                         desc_ptr += 4;
 194                         if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE &&
 195                             type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE)
 196                                 continue;
 197                         if (count++ == descriptor) {
 198                                 memcpy(desc_ptr, desc, 4);
 199                                 /* set select */
 200                                 desc_ptr[0] |= 0x80;
 201                                 /* clear reserved, just in case */
 202                                 desc_ptr[0] &= 0xf0;
 203                         }
 204                 }
 205         }
 206
 207         return ses_send_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len);
 208 }
 209
 210 static unsigned char *ses_get_page2_descriptor(struct enclosure_device *edev,
 211                                       struct enclosure_component *ecomp)
 212 {
 213         int i, j, count = 0, descriptor = ecomp->number;
 214         struct scsi_device *sdev = to_scsi_device(edev->edev.parent);
 215         struct ses_device *ses_dev = edev->scratch;
 216         unsigned char *type_ptr = ses_dev->page1_types;
 217         unsigned char *desc_ptr = ses_dev->page2 + 8;
 218
 219         if (ses_recv_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len) < 0)
 220                 return NULL;
 221
 222         for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) {
 223                 for (j = 0; j < type_ptr[1]; j++) {
 224                         desc_ptr += 4;
 225                         if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE &&
 226                             type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE)
 227                                 continue;
 228                         if (count++ == descriptor)
 229                                 return desc_ptr;
 230                 }
 231         }
 232         return NULL;
 233 }
 234
 235 /* For device slot and array device slot elements, byte 3 bit 6
 236  * is "fault sensed" while byte 3 bit 5 is "fault reqstd". As this
 237  * code stands these bits are shifted 4 positions right so in
 238  * sysfs they will appear as bits 2 and 1 respectively. Strange. */
 239 static void ses_get_fault(struct enclosure_device *edev,
 240                           struct enclosure_component *ecomp)
 241 {
 242         unsigned char *desc;
 243
 244         if (!ses_page2_supported(edev)) {
 245                 ecomp->fault = 0;
 246                 return;
 247         }
 248         desc = ses_get_page2_descriptor(edev, ecomp);
 249         if (desc)
 250                 ecomp->fault = (desc[3] & 0x60) >> 4;
 251 }
 252
 253 static int ses_set_fault(struct enclosure_device *edev,
 254                           struct enclosure_component *ecomp,
 255                          enum enclosure_component_setting val)
 256 {
 257         unsigned char desc[4];
 258         unsigned char *desc_ptr;
 259
 260         if (!ses_page2_supported(edev))
 261                 return -EINVAL;
 262
 263         desc_ptr = ses_get_page2_descriptor(edev, ecomp);
 264
 265         if (!desc_ptr)
 266                 return -EIO;
 267
 268         init_device_slot_control(desc, ecomp, desc_ptr);
 269
 270         switch (val) {
 271         case ENCLOSURE_SETTING_DISABLED:
 272                 desc[3] &= 0xdf;
 273                 break;
 274         case ENCLOSURE_SETTING_ENABLED:
 275                 desc[3] |= 0x20;
 276                 break;
 277         default:
 278                 /* SES doesn't do the SGPIO blink settings */
 279                 return -EINVAL;
 280         }
 281
 282         return ses_set_page2_descriptor(edev, ecomp, desc);
 283 }
 284
 285 static void ses_get_status(struct enclosure_device *edev,
 286                            struct enclosure_component *ecomp)
 287 {
 288         unsigned char *desc;
 289
 290         if (!ses_page2_supported(edev)) {
 291                 ecomp->status = 0;
 292                 return;
 293         }
 294         desc = ses_get_page2_descriptor(edev, ecomp);
 295         if (desc)
 296                 ecomp->status = (desc[0] & 0x0f);
 297 }
 298
 299 static void ses_get_locate(struct enclosure_device *edev,
 300                            struct enclosure_component *ecomp)
 301 {
 302         unsigned char *desc;
 303
 304         if (!ses_page2_supported(edev)) {
 305                 ecomp->locate = 0;
 306                 return;
 307         }
 308         desc = ses_get_page2_descriptor(edev, ecomp);
 309         if (desc)
 310                 ecomp->locate = (desc[2] & 0x02) ? 1 : 0;
 311 }
 312
 313 static int ses_set_locate(struct enclosure_device *edev,
 314                           struct enclosure_component *ecomp,
 315                           enum enclosure_component_setting val)
 316 {
 317         unsigned char desc[4];
 318         unsigned char *desc_ptr;
 319
 320         if (!ses_page2_supported(edev))
 321                 return -EINVAL;
 322
 323         desc_ptr = ses_get_page2_descriptor(edev, ecomp);
 324
 325         if (!desc_ptr)
 326                 return -EIO;
 327
 328         init_device_slot_control(desc, ecomp, desc_ptr);
 329
 330         switch (val) {
 331         case ENCLOSURE_SETTING_DISABLED:
 332                 desc[2] &= 0xfd;
 333                 break;
 334         case ENCLOSURE_SETTING_ENABLED:
 335                 desc[2] |= 0x02;
 336                 break;
 337         default:
 338                 /* SES doesn't do the SGPIO blink settings */
 339                 return -EINVAL;
 340         }
 341         return ses_set_page2_descriptor(edev, ecomp, desc);
 342 }
 343
 344 static int ses_set_active(struct enclosure_device *edev,
 345                           struct enclosure_component *ecomp,
 346                           enum enclosure_component_setting val)
 347 {
 348         unsigned char desc[4];
 349         unsigned char *desc_ptr;
 350
 351         if (!ses_page2_supported(edev))
 352                 return -EINVAL;
 353
 354         desc_ptr = ses_get_page2_descriptor(edev, ecomp);
 355
 356         if (!desc_ptr)
 357                 return -EIO;
 358
 359         init_device_slot_control(desc, ecomp, desc_ptr);
 360
 361         switch (val) {
 362         case ENCLOSURE_SETTING_DISABLED:
 363                 desc[2] &= 0x7f;
 364                 ecomp->active = 0;
 365                 break;
 366         case ENCLOSURE_SETTING_ENABLED:
 367                 desc[2] |= 0x80;
 368                 ecomp->active = 1;
 369                 break;
 370         default:
 371                 /* SES doesn't do the SGPIO blink settings */
 372                 return -EINVAL;
 373         }
 374         return ses_set_page2_descriptor(edev, ecomp, desc);
 375 }
 376
 377 static int ses_show_id(struct enclosure_device *edev, char *buf)
 378 {
 379         struct ses_device *ses_dev = edev->scratch;
 380         unsigned long long id = get_unaligned_be64(ses_dev->page1+8+4);
 381
 382         return sprintf(buf, "%#llx\n", id);
 383 }
 384
 385 static void ses_get_power_status(struct enclosure_device *edev,
 386                                  struct enclosure_component *ecomp)
 387 {
 388         unsigned char *desc;
 389
 390         if (!ses_page2_supported(edev)) {
 391                 ecomp->power_status = 0;
 392                 return;
 393         }
 394
 395         desc = ses_get_page2_descriptor(edev, ecomp);
 396         if (desc)
 397                 ecomp->power_status = (desc[3] & 0x10) ? 0 : 1;
 398 }
 399
 400 static int ses_set_power_status(struct enclosure_device *edev,
 401                                 struct enclosure_component *ecomp,
 402                                 int val)
 403 {
 404         unsigned char desc[4];
 405         unsigned char *desc_ptr;
 406
 407         if (!ses_page2_supported(edev))
 408                 return -EINVAL;
 409
 410         desc_ptr = ses_get_page2_descriptor(edev, ecomp);
 411
 412         if (!desc_ptr)
 413                 return -EIO;
 414
 415         init_device_slot_control(desc, ecomp, desc_ptr);
 416
 417         switch (val) {
 418         /* power = 1 is device_off = 0 and vice versa */
 419         case 0:
 420                 desc[3] |= 0x10;
 421                 break;
 422         case 1:
 423                 desc[3] &= 0xef;
 424                 break;
 425         default:
 426                 return -EINVAL;
 427         }
 428         ecomp->power_status = val;
 429         return ses_set_page2_descriptor(edev, ecomp, desc);
 430 }
 431
 432 static struct enclosure_component_callbacks ses_enclosure_callbacks = {
 433         .get_fault              = ses_get_fault,
 434         .set_fault              = ses_set_fault,
 435         .get_status             = ses_get_status,
 436         .get_locate             = ses_get_locate,
 437         .set_locate             = ses_set_locate,
 438         .get_power_status       = ses_get_power_status,
 439         .set_power_status       = ses_set_power_status,
 440         .set_active             = ses_set_active,
 441         .show_id                = ses_show_id,
 442 };
 443
 444 struct ses_host_edev {
 445         struct Scsi_Host *shost;
 446         struct enclosure_device *edev;
 447 };
 448
 449 #if 0
 450 int ses_match_host(struct enclosure_device *edev, void *data)
 451 {
 452         struct ses_host_edev *sed = data;
 453         struct scsi_device *sdev;
 454
 455         if (!scsi_is_sdev_device(edev->edev.parent))
 456                 return 0;
 457
 458         sdev = to_scsi_device(edev->edev.parent);
 459
 460         if (sdev->host != sed->shost)
 461                 return 0;
 462
 463         sed->edev = edev;
 464         return 1;
 465 }
 466 #endif  /*  0  */
 467
 468 static int ses_process_descriptor(struct enclosure_component *ecomp,
 469                                    unsigned char *desc, int max_desc_len)
 470 {
 471         int eip = desc[0] & 0x10;
 472         int invalid = desc[0] & 0x80;
 473         enum scsi_protocol proto = desc[0] & 0x0f;
 474         u64 addr = 0;
 475         int slot = -1;
 476         struct ses_component *scomp = ecomp->scratch;
 477         unsigned char *d;
 478
 479         if (invalid)
 480                 return 0;
 481
 482         switch (proto) {
 483         case SCSI_PROTOCOL_FCP:
 484                 if (eip) {
 485                         if (max_desc_len <= 7)
 486                                 return 1;
 487                         d = desc + 4;
 488                         slot = d[3];
 489                 }
 490                 break;
 491         case SCSI_PROTOCOL_SAS:
 492
 493                 if (eip) {
 494                         if (max_desc_len <= 27)
 495                                 return 1;
 496                         d = desc + 4;
 497                         slot = d[3];
 498                         d = desc + 8;
 499                 } else {
 500                         if (max_desc_len <= 23)
 501                                 return 1;
 502                         d = desc + 4;
 503                 }
 504
 505
 506                 /* only take the phy0 addr */
 507                 addr = (u64)d[12] << 56 |
 508                         (u64)d[13] << 48 |
 509                         (u64)d[14] << 40 |
 510                         (u64)d[15] << 32 |
 511                         (u64)d[16] << 24 |
 512                         (u64)d[17] << 16 |
 513                         (u64)d[18] << 8 |
 514                         (u64)d[19];
 515                 break;
 516         default:
 517                 /* FIXME: Need to add more protocols than just SAS */
 518                 break;
 519         }
 520         ecomp->slot = slot;
 521         scomp->addr = addr;
 522
 523         return 0;
 524 }
 525
 526 struct efd {
 527         u64 addr;
 528         struct device *dev;
 529 };
 530
 531 static int ses_enclosure_find_by_addr(struct enclosure_device *edev,
 532                                       void *data)
 533 {
 534         struct efd *efd = data;
 535         int i;
 536         struct ses_component *scomp;
 537
 538         for (i = 0; i < edev->components; i++) {
 539                 scomp = edev->component[i].scratch;
 540                 if (scomp->addr != efd->addr)
 541                         continue;
 542
 543                 if (enclosure_add_device(edev, i, efd->dev) == 0)
 544                         kobject_uevent(&efd->dev->kobj, KOBJ_CHANGE);
 545                 return 1;
 546         }
 547         return 0;
 548 }
 549
 550 #define INIT_ALLOC_SIZE 32
 551
 552 static void ses_enclosure_data_process(struct enclosure_device *edev,
 553                                        struct scsi_device *sdev,
 554                                        int create)
 555 {
 556         u32 result;
 557         unsigned char *buf = NULL, *type_ptr, *desc_ptr, *addl_desc_ptr = NULL;
 558         int i, j, page7_len, len, components;
 559         struct ses_device *ses_dev = edev->scratch;
 560         int types = ses_dev->page1_num_types;
 561         unsigned char *hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL);
 562
 563         if (!hdr_buf)
 564                 goto simple_populate;
 565
 566         /* re-read page 10 */
 567         if (ses_dev->page10)
 568                 ses_recv_diag(sdev, 10, ses_dev->page10, ses_dev->page10_len);
 569         /* Page 7 for the descriptors is optional */
 570         result = ses_recv_diag(sdev, 7, hdr_buf, INIT_ALLOC_SIZE);
 571         if (result)
 572                 goto simple_populate;
 573
 574         page7_len = len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
 575         /* add 1 for trailing '\0' we'll use */
 576         buf = kzalloc(len + 1, GFP_KERNEL);
 577         if (!buf)
 578                 goto simple_populate;
 579         result = ses_recv_diag(sdev, 7, buf, len);
 580         if (result) {
 581  simple_populate:
 582                 kfree(buf);
 583                 buf = NULL;
 584                 desc_ptr = NULL;
 585                 len = 0;
 586                 page7_len = 0;
 587         } else {
 588                 desc_ptr = buf + 8;
 589                 len = (desc_ptr[2] << 8) + desc_ptr[3];
 590                 /* skip past overall descriptor */
 591                 desc_ptr += len + 4;
 592         }
 593         if (ses_dev->page10 && ses_dev->page10_len > 9)
 594                 addl_desc_ptr = ses_dev->page10 + 8;
 595         type_ptr = ses_dev->page1_types;
 596         components = 0;
 597         for (i = 0; i < types; i++, type_ptr += 4) {
 598                 for (j = 0; j < type_ptr[1]; j++) {
 599                         char *name = NULL;
 600                         struct enclosure_component *ecomp;
 601                         int max_desc_len;
 602
 603                         if (desc_ptr) {
 604                                 if (desc_ptr + 3 >= buf + page7_len) {
 605                                         desc_ptr = NULL;
 606                                 } else {
 607                                         len = (desc_ptr[2] << 8) + desc_ptr[3];
 608                                         desc_ptr += 4;
 609                                         if (desc_ptr + len > buf + page7_len)
 610                                                 desc_ptr = NULL;
 611                                         else {
 612                                                 /* Add trailing zero - pushes into
 613                                                  * reserved space */
 614                                                 desc_ptr[len] = '\0';
 615                                                 name = desc_ptr;
 616                                         }
 617                                 }
 618                         }
 619                         if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
 620                             type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) {
 621
 622                                 if (create)
 623                                         ecomp = enclosure_component_alloc(
 624                                                 edev,
 625                                                 components++,
 626                                                 type_ptr[0],
 627                                                 name);
 628                                 else if (components < edev->components)
 629                                         ecomp = &edev->component[components++];
 630                                 else
 631                                         ecomp = ERR_PTR(-EINVAL);
 632
 633                                 if (!IS_ERR(ecomp)) {
 634                                         if (addl_desc_ptr) {
 635                                                 max_desc_len = ses_dev->page10_len -
 636                                                     (addl_desc_ptr - ses_dev->page10);
 637                                                 if (ses_process_descriptor(ecomp,
 638                                                     addl_desc_ptr,
 639                                                     max_desc_len))
 640                                                         addl_desc_ptr = NULL;
 641                                         }
 642                                         if (create)
 643                                                 enclosure_component_register(
 644                                                         ecomp);
 645                                 }
 646                         }
 647                         if (desc_ptr)
 648                                 desc_ptr += len;
 649
 650                         if (addl_desc_ptr &&
 651                             /* only find additional descriptions for specific devices */
 652                             (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
 653                              type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE ||
 654                              type_ptr[0] == ENCLOSURE_COMPONENT_SAS_EXPANDER ||
 655                              /* these elements are optional */
 656                              type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_TARGET_PORT ||
 657                              type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT ||
 658                              type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS)) {
 659                                 addl_desc_ptr += addl_desc_ptr[1] + 2;
 660                                 if (addl_desc_ptr + 1 >= ses_dev->page10 + ses_dev->page10_len)
 661                                         addl_desc_ptr = NULL;
 662                         }
 663                 }
 664         }
 665         kfree(buf);
 666         kfree(hdr_buf);
 667 }
 668
 669 static void ses_match_to_enclosure(struct enclosure_device *edev,
 670                                    struct scsi_device *sdev,
 671                                    int refresh)
 672 {
 673         struct scsi_device *edev_sdev = to_scsi_device(edev->edev.parent);
 674         struct efd efd = {
 675                 .addr = 0,
 676         };
 677
 678         if (refresh)
 679                 ses_enclosure_data_process(edev, edev_sdev, 0);
 680
 681         if (scsi_is_sas_rphy(sdev->sdev_target->dev.parent))
 682                 efd.addr = sas_get_address(sdev);
 683
 684         if (efd.addr) {
 685                 efd.dev = &sdev->sdev_gendev;
 686
 687                 enclosure_for_each_device(ses_enclosure_find_by_addr, &efd);
 688         }
 689 }
 690
 691 static int ses_intf_add(struct device *cdev)
 692 {
 693         struct scsi_device *sdev = to_scsi_device(cdev->parent);
 694         struct scsi_device *tmp_sdev;
 695         unsigned char *buf = NULL, *hdr_buf, *type_ptr, page;
 696         struct ses_device *ses_dev;
 697         u32 result;
 698         int i, types, len, components = 0;
 699         int err = -ENOMEM;
 700         int num_enclosures;
 701         struct enclosure_device *edev;
 702         struct ses_component *scomp = NULL;
 703
 704         if (!scsi_device_enclosure(sdev)) {
 705                 /* not an enclosure, but might be in one */
 706                 struct enclosure_device *prev = NULL;
 707
 708                 while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) {
 709                         ses_match_to_enclosure(edev, sdev, 1);
 710                         prev = edev;
 711                 }
 712                 return -ENODEV;
 713         }
 714
 715         /* TYPE_ENCLOSURE prints a message in probe */
 716         if (sdev->type != TYPE_ENCLOSURE)
 717                 sdev_printk(KERN_NOTICE, sdev, "Embedded Enclosure Device\n");
 718
 719         ses_dev = kzalloc(sizeof(*ses_dev), GFP_KERNEL);
 720         hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL);
 721         if (!hdr_buf || !ses_dev)
 722                 goto err_init_free;
 723
 724         page = 1;
 725         result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE);
 726         if (result)
 727                 goto recv_failed;
 728
 729         len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
 730         buf = kzalloc(len, GFP_KERNEL);
 731         if (!buf)
 732                 goto err_free;
 733
 734         result = ses_recv_diag(sdev, page, buf, len);
 735         if (result)
 736                 goto recv_failed;
 737
 738         types = 0;
 739
 740         /* we always have one main enclosure and the rest are referred
 741          * to as secondary subenclosures */
 742         num_enclosures = buf[1] + 1;
 743
 744         /* begin at the enclosure descriptor */
 745         type_ptr = buf + 8;
 746         /* skip all the enclosure descriptors */
 747         for (i = 0; i < num_enclosures && type_ptr < buf + len; i++) {
 748                 types += type_ptr[2];
 749                 type_ptr += type_ptr[3] + 4;
 750         }
 751
 752         ses_dev->page1_types = type_ptr;
 753         ses_dev->page1_num_types = types;
 754
 755         for (i = 0; i < types && type_ptr < buf + len; i++, type_ptr += 4) {
 756                 if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
 757                     type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE)
 758                         components += type_ptr[1];
 759         }
 760
 761         ses_dev->page1 = buf;
 762         ses_dev->page1_len = len;
 763         buf = NULL;
 764
 765         page = 2;
 766         result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE);
 767         if (result)
 768                 goto page2_not_supported;
 769
 770         len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
 771         buf = kzalloc(len, GFP_KERNEL);
 772         if (!buf)
 773                 goto err_free;
 774
 775         /* make sure getting page 2 actually works */
 776         result = ses_recv_diag(sdev, 2, buf, len);
 777         if (result)
 778                 goto recv_failed;
 779         ses_dev->page2 = buf;
 780         ses_dev->page2_len = len;
 781         buf = NULL;
 782
 783         /* The additional information page --- allows us
 784          * to match up the devices */
 785         page = 10;
 786         result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE);
 787         if (!result) {
 788
 789                 len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
 790                 buf = kzalloc(len, GFP_KERNEL);
 791                 if (!buf)
 792                         goto err_free;
 793
 794                 result = ses_recv_diag(sdev, page, buf, len);
 795                 if (result)
 796                         goto recv_failed;
 797                 ses_dev->page10 = buf;
 798                 ses_dev->page10_len = len;
 799                 buf = NULL;
 800         }
 801 page2_not_supported:
 802         if (components > 0) {
 803                 scomp = kcalloc(components, sizeof(struct ses_component), GFP_KERNEL);
 804                 if (!scomp)
 805                         goto err_free;
 806         }
 807
 808         edev = enclosure_register(cdev->parent, dev_name(&sdev->sdev_gendev),
 809                                   components, &ses_enclosure_callbacks);
 810         if (IS_ERR(edev)) {
 811                 err = PTR_ERR(edev);
 812                 goto err_free;
 813         }
 814
 815         kfree(hdr_buf);
 816
 817         edev->scratch = ses_dev;
 818         for (i = 0; i < components; i++)
 819                 edev->component[i].scratch = scomp + i;
 820
 821         ses_enclosure_data_process(edev, sdev, 1);
 822
 823         /* see if there are any devices matching before
 824          * we found the enclosure */
 825         shost_for_each_device(tmp_sdev, sdev->host) {
 826                 if (tmp_sdev->lun != 0 || scsi_device_enclosure(tmp_sdev))
 827                         continue;
 828                 ses_match_to_enclosure(edev, tmp_sdev, 0);
 829         }
 830
 831         return 0;
 832
 833  recv_failed:
 834         sdev_printk(KERN_ERR, sdev, "Failed to get diagnostic page 0x%x\n",
 835                     page);
 836         err = -ENODEV;
 837  err_free:
 838         kfree(buf);
 839         kfree(scomp);
 840         kfree(ses_dev->page10);
 841         kfree(ses_dev->page2);
 842         kfree(ses_dev->page1);
 843  err_init_free:
 844         kfree(ses_dev);
 845         kfree(hdr_buf);
 846         sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n", err);
 847         return err;
 848 }
 849
 850 static int ses_remove(struct device *dev)
 851 {
 852         return 0;
 853 }
 854
 855 static void ses_intf_remove_component(struct scsi_device *sdev)
 856 {
 857         struct enclosure_device *edev, *prev = NULL;
 858
 859         while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) {
 860                 prev = edev;
 861                 if (!enclosure_remove_device(edev, &sdev->sdev_gendev))
 862                         break;
 863         }
 864         if (edev)
 865                 put_device(&edev->edev);
 866 }
 867
 868 static void ses_intf_remove_enclosure(struct scsi_device *sdev)
 869 {
 870         struct enclosure_device *edev;
 871         struct ses_device *ses_dev;
 872
 873         /*  exact match to this enclosure */
 874         edev = enclosure_find(&sdev->sdev_gendev, NULL);
 875         if (!edev)
 876                 return;
 877
 878         ses_dev = edev->scratch;
 879         edev->scratch = NULL;
 880
 881         kfree(ses_dev->page10);
 882         kfree(ses_dev->page1);
 883         kfree(ses_dev->page2);
 884         kfree(ses_dev);
 885
 886         if (edev->components)
 887                 kfree(edev->component[0].scratch);
 888
 889         put_device(&edev->edev);
 890         enclosure_unregister(edev);
 891 }
 892
 893 static void ses_intf_remove(struct device *cdev)
 894 {
 895         struct scsi_device *sdev = to_scsi_device(cdev->parent);
 896
 897         if (!scsi_device_enclosure(sdev))
 898                 ses_intf_remove_component(sdev);
 899         else
 900                 ses_intf_remove_enclosure(sdev);
 901 }
 902
 903 static struct class_interface ses_interface = {
 904         .add_dev        = ses_intf_add,
 905         .remove_dev     = ses_intf_remove,
 906 };
 907
 908 static struct scsi_driver ses_template = {
 909         .gendrv = {
 910                 .name           = "ses",
 911                 .owner          = THIS_MODULE,
 912                 .probe          = ses_probe,
 913                 .remove         = ses_remove,
 914         },
 915 };
 916
 917 static int __init ses_init(void)
 918 {
 919         int err;
 920
 921         err = scsi_register_interface(&ses_interface);
 922         if (err)
 923                 return err;
 924
 925         err = scsi_register_driver(&ses_template.gendrv);
 926         if (err)
 927                 goto out_unreg;
 928
 929         return 0;
 930
 931  out_unreg:
 932         scsi_unregister_interface(&ses_interface);
 933         return err;
 934 }
 935
 936 static void __exit ses_exit(void)
 937 {
 938         scsi_unregister_driver(&ses_template.gendrv);
 939         scsi_unregister_interface(&ses_interface);
 940 }
 941
 942 module_init(ses_init);
 943 module_exit(ses_exit);
 944
 945 MODULE_ALIAS_SCSI_DEVICE(TYPE_ENCLOSURE);
 946
 947 MODULE_AUTHOR("James Bottomley");
 948 MODULE_DESCRIPTION("SCSI Enclosure Services (ses) driver");
 949 MODULE_LICENSE("GPL v2");