1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 1999 Eric Youngdale
4 * Copyright (C) 2014 Christoph Hellwig
6 * SCSI queueing library.
7 * Initial versions: Eric Youngdale (eric@andante.org).
8 * Based upon conversations with large numbers
9 * of people at Linux Expo.
12 #include <linux/bio.h>
13 #include <linux/bitops.h>
14 #include <linux/blkdev.h>
15 #include <linux/completion.h>
16 #include <linux/kernel.h>
17 #include <linux/export.h>
18 #include <linux/init.h>
19 #include <linux/pci.h>
20 #include <linux/delay.h>
21 #include <linux/hardirq.h>
22 #include <linux/scatterlist.h>
23 #include <linux/blk-mq.h>
24 #include <linux/blk-integrity.h>
25 #include <linux/ratelimit.h>
26 #include <asm/unaligned.h>
28 #include <scsi/scsi.h>
29 #include <scsi/scsi_cmnd.h>
30 #include <scsi/scsi_dbg.h>
31 #include <scsi/scsi_device.h>
32 #include <scsi/scsi_driver.h>
33 #include <scsi/scsi_eh.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_transport.h> /* __scsi_init_queue() */
36 #include <scsi/scsi_dh.h>
38 #include <trace/events/scsi.h>
40 #include "scsi_debugfs.h"
41 #include "scsi_priv.h"
42 #include "scsi_logging.h"
45 * Size of integrity metadata is usually small, 1 inline sg should
48 #ifdef CONFIG_ARCH_NO_SG_CHAIN
49 #define SCSI_INLINE_PROT_SG_CNT 0
50 #define SCSI_INLINE_SG_CNT 0
52 #define SCSI_INLINE_PROT_SG_CNT 1
53 #define SCSI_INLINE_SG_CNT 2
56 static struct kmem_cache *scsi_sense_cache;
57 static DEFINE_MUTEX(scsi_sense_cache_mutex);
59 static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd);
61 int scsi_init_sense_cache(struct Scsi_Host *shost)
65 mutex_lock(&scsi_sense_cache_mutex);
66 if (!scsi_sense_cache) {
68 kmem_cache_create_usercopy("scsi_sense_cache",
69 SCSI_SENSE_BUFFERSIZE, 0, SLAB_HWCACHE_ALIGN,
70 0, SCSI_SENSE_BUFFERSIZE, NULL);
71 if (!scsi_sense_cache)
74 mutex_unlock(&scsi_sense_cache_mutex);
79 scsi_set_blocked(struct scsi_cmnd *cmd, int reason)
81 struct Scsi_Host *host = cmd->device->host;
82 struct scsi_device *device = cmd->device;
83 struct scsi_target *starget = scsi_target(device);
86 * Set the appropriate busy bit for the device/host.
88 * If the host/device isn't busy, assume that something actually
89 * completed, and that we should be able to queue a command now.
91 * Note that the prior mid-layer assumption that any host could
92 * always queue at least one command is now broken. The mid-layer
93 * will implement a user specifiable stall (see
94 * scsi_host.max_host_blocked and scsi_device.max_device_blocked)
95 * if a command is requeued with no other commands outstanding
96 * either for the device or for the host.
99 case SCSI_MLQUEUE_HOST_BUSY:
100 atomic_set(&host->host_blocked, host->max_host_blocked);
102 case SCSI_MLQUEUE_DEVICE_BUSY:
103 case SCSI_MLQUEUE_EH_RETRY:
104 atomic_set(&device->device_blocked,
105 device->max_device_blocked);
107 case SCSI_MLQUEUE_TARGET_BUSY:
108 atomic_set(&starget->target_blocked,
109 starget->max_target_blocked);
114 static void scsi_mq_requeue_cmd(struct scsi_cmnd *cmd, unsigned long msecs)
116 struct request *rq = scsi_cmd_to_rq(cmd);
118 if (rq->rq_flags & RQF_DONTPREP) {
119 rq->rq_flags &= ~RQF_DONTPREP;
120 scsi_mq_uninit_cmd(cmd);
125 blk_mq_requeue_request(rq, false);
126 if (!scsi_host_in_recovery(cmd->device->host))
127 blk_mq_delay_kick_requeue_list(rq->q, msecs);
131 * __scsi_queue_insert - private queue insertion
132 * @cmd: The SCSI command being requeued
133 * @reason: The reason for the requeue
134 * @unbusy: Whether the queue should be unbusied
136 * This is a private queue insertion. The public interface
137 * scsi_queue_insert() always assumes the queue should be unbusied
138 * because it's always called before the completion. This function is
139 * for a requeue after completion, which should only occur in this
142 static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, bool unbusy)
144 struct scsi_device *device = cmd->device;
146 SCSI_LOG_MLQUEUE(1, scmd_printk(KERN_INFO, cmd,
147 "Inserting command %p into mlqueue\n", cmd));
149 scsi_set_blocked(cmd, reason);
152 * Decrement the counters, since these commands are no longer
153 * active on the host/device.
156 scsi_device_unbusy(device, cmd);
159 * Requeue this command. It will go before all other commands
160 * that are already in the queue. Schedule requeue work under
161 * lock such that the kblockd_schedule_work() call happens
162 * before blk_mq_destroy_queue() finishes.
166 blk_mq_requeue_request(scsi_cmd_to_rq(cmd),
167 !scsi_host_in_recovery(cmd->device->host));
171 * scsi_queue_insert - Reinsert a command in the queue.
172 * @cmd: command that we are adding to queue.
173 * @reason: why we are inserting command to queue.
175 * We do this for one of two cases. Either the host is busy and it cannot accept
176 * any more commands for the time being, or the device returned QUEUE_FULL and
177 * can accept no more commands.
179 * Context: This could be called either from an interrupt context or a normal
182 void scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
184 __scsi_queue_insert(cmd, reason, true);
188 * scsi_execute_cmd - insert request and wait for the result
191 * @opf: block layer request cmd_flags
192 * @buffer: data buffer
193 * @bufflen: len of buffer
194 * @timeout: request timeout in HZ
195 * @retries: number of times to retry request
196 * @args: Optional args. See struct definition for field descriptions
198 * Returns the scsi_cmnd result field if a command was executed, or a negative
199 * Linux error code if we didn't get that far.
201 int scsi_execute_cmd(struct scsi_device *sdev, const unsigned char *cmd,
202 blk_opf_t opf, void *buffer, unsigned int bufflen,
203 int timeout, int retries,
204 const struct scsi_exec_args *args)
206 static const struct scsi_exec_args default_args;
208 struct scsi_cmnd *scmd;
212 args = &default_args;
213 else if (WARN_ON_ONCE(args->sense &&
214 args->sense_len != SCSI_SENSE_BUFFERSIZE))
217 req = scsi_alloc_request(sdev->request_queue, opf, args->req_flags);
222 ret = blk_rq_map_kern(sdev->request_queue, req,
223 buffer, bufflen, GFP_NOIO);
227 scmd = blk_mq_rq_to_pdu(req);
228 scmd->cmd_len = COMMAND_SIZE(cmd[0]);
229 memcpy(scmd->cmnd, cmd, scmd->cmd_len);
230 scmd->allowed = retries;
231 scmd->flags |= args->scmd_flags;
232 req->timeout = timeout;
233 req->rq_flags |= RQF_QUIET;
236 * head injection *required* here otherwise quiesce won't work
238 blk_execute_rq(req, true);
241 * Some devices (USB mass-storage in particular) may transfer
242 * garbage data together with a residue indicating that the data
243 * is invalid. Prevent the garbage from being misinterpreted
244 * and prevent security leaks by zeroing out the excess data.
246 if (unlikely(scmd->resid_len > 0 && scmd->resid_len <= bufflen))
247 memset(buffer + bufflen - scmd->resid_len, 0, scmd->resid_len);
250 *args->resid = scmd->resid_len;
252 memcpy(args->sense, scmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
254 scsi_normalize_sense(scmd->sense_buffer, scmd->sense_len,
259 blk_mq_free_request(req);
263 EXPORT_SYMBOL(scsi_execute_cmd);
266 * Wake up the error handler if necessary. Avoid as follows that the error
267 * handler is not woken up if host in-flight requests number ==
268 * shost->host_failed: use call_rcu() in scsi_eh_scmd_add() in combination
269 * with an RCU read lock in this function to ensure that this function in
270 * its entirety either finishes before scsi_eh_scmd_add() increases the
271 * host_failed counter or that it notices the shost state change made by
272 * scsi_eh_scmd_add().
274 static void scsi_dec_host_busy(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
279 __clear_bit(SCMD_STATE_INFLIGHT, &cmd->state);
280 if (unlikely(scsi_host_in_recovery(shost))) {
281 unsigned int busy = scsi_host_busy(shost);
283 spin_lock_irqsave(shost->host_lock, flags);
284 if (shost->host_failed || shost->host_eh_scheduled)
285 scsi_eh_wakeup(shost, busy);
286 spin_unlock_irqrestore(shost->host_lock, flags);
291 void scsi_device_unbusy(struct scsi_device *sdev, struct scsi_cmnd *cmd)
293 struct Scsi_Host *shost = sdev->host;
294 struct scsi_target *starget = scsi_target(sdev);
296 scsi_dec_host_busy(shost, cmd);
298 if (starget->can_queue > 0)
299 atomic_dec(&starget->target_busy);
301 sbitmap_put(&sdev->budget_map, cmd->budget_token);
302 cmd->budget_token = -1;
306 * Kick the queue of SCSI device @sdev if @sdev != current_sdev. Called with
307 * interrupts disabled.
309 static void scsi_kick_sdev_queue(struct scsi_device *sdev, void *data)
311 struct scsi_device *current_sdev = data;
313 if (sdev != current_sdev)
314 blk_mq_run_hw_queues(sdev->request_queue, true);
318 * Called for single_lun devices on IO completion. Clear starget_sdev_user,
319 * and call blk_run_queue for all the scsi_devices on the target -
320 * including current_sdev first.
322 * Called with *no* scsi locks held.
324 static void scsi_single_lun_run(struct scsi_device *current_sdev)
326 struct Scsi_Host *shost = current_sdev->host;
327 struct scsi_target *starget = scsi_target(current_sdev);
330 spin_lock_irqsave(shost->host_lock, flags);
331 starget->starget_sdev_user = NULL;
332 spin_unlock_irqrestore(shost->host_lock, flags);
335 * Call blk_run_queue for all LUNs on the target, starting with
336 * current_sdev. We race with others (to set starget_sdev_user),
337 * but in most cases, we will be first. Ideally, each LU on the
338 * target would get some limited time or requests on the target.
340 blk_mq_run_hw_queues(current_sdev->request_queue,
341 shost->queuecommand_may_block);
343 spin_lock_irqsave(shost->host_lock, flags);
344 if (!starget->starget_sdev_user)
345 __starget_for_each_device(starget, current_sdev,
346 scsi_kick_sdev_queue);
347 spin_unlock_irqrestore(shost->host_lock, flags);
350 static inline bool scsi_device_is_busy(struct scsi_device *sdev)
352 if (scsi_device_busy(sdev) >= sdev->queue_depth)
354 if (atomic_read(&sdev->device_blocked) > 0)
359 static inline bool scsi_target_is_busy(struct scsi_target *starget)
361 if (starget->can_queue > 0) {
362 if (atomic_read(&starget->target_busy) >= starget->can_queue)
364 if (atomic_read(&starget->target_blocked) > 0)
370 static inline bool scsi_host_is_busy(struct Scsi_Host *shost)
372 if (atomic_read(&shost->host_blocked) > 0)
374 if (shost->host_self_blocked)
379 static void scsi_starved_list_run(struct Scsi_Host *shost)
381 LIST_HEAD(starved_list);
382 struct scsi_device *sdev;
385 spin_lock_irqsave(shost->host_lock, flags);
386 list_splice_init(&shost->starved_list, &starved_list);
388 while (!list_empty(&starved_list)) {
389 struct request_queue *slq;
392 * As long as shost is accepting commands and we have
393 * starved queues, call blk_run_queue. scsi_request_fn
394 * drops the queue_lock and can add us back to the
397 * host_lock protects the starved_list and starved_entry.
398 * scsi_request_fn must get the host_lock before checking
399 * or modifying starved_list or starved_entry.
401 if (scsi_host_is_busy(shost))
404 sdev = list_entry(starved_list.next,
405 struct scsi_device, starved_entry);
406 list_del_init(&sdev->starved_entry);
407 if (scsi_target_is_busy(scsi_target(sdev))) {
408 list_move_tail(&sdev->starved_entry,
409 &shost->starved_list);
414 * Once we drop the host lock, a racing scsi_remove_device()
415 * call may remove the sdev from the starved list and destroy
416 * it and the queue. Mitigate by taking a reference to the
417 * queue and never touching the sdev again after we drop the
418 * host lock. Note: if __scsi_remove_device() invokes
419 * blk_mq_destroy_queue() before the queue is run from this
420 * function then blk_run_queue() will return immediately since
421 * blk_mq_destroy_queue() marks the queue with QUEUE_FLAG_DYING.
423 slq = sdev->request_queue;
424 if (!blk_get_queue(slq))
426 spin_unlock_irqrestore(shost->host_lock, flags);
428 blk_mq_run_hw_queues(slq, false);
431 spin_lock_irqsave(shost->host_lock, flags);
433 /* put any unprocessed entries back */
434 list_splice(&starved_list, &shost->starved_list);
435 spin_unlock_irqrestore(shost->host_lock, flags);
439 * scsi_run_queue - Select a proper request queue to serve next.
440 * @q: last request's queue
442 * The previous command was completely finished, start a new one if possible.
444 static void scsi_run_queue(struct request_queue *q)
446 struct scsi_device *sdev = q->queuedata;
448 if (scsi_target(sdev)->single_lun)
449 scsi_single_lun_run(sdev);
450 if (!list_empty(&sdev->host->starved_list))
451 scsi_starved_list_run(sdev->host);
453 /* Note: blk_mq_kick_requeue_list() runs the queue asynchronously. */
454 blk_mq_kick_requeue_list(q);
457 void scsi_requeue_run_queue(struct work_struct *work)
459 struct scsi_device *sdev;
460 struct request_queue *q;
462 sdev = container_of(work, struct scsi_device, requeue_work);
463 q = sdev->request_queue;
467 void scsi_run_host_queues(struct Scsi_Host *shost)
469 struct scsi_device *sdev;
471 shost_for_each_device(sdev, shost)
472 scsi_run_queue(sdev->request_queue);
475 static void scsi_uninit_cmd(struct scsi_cmnd *cmd)
477 if (!blk_rq_is_passthrough(scsi_cmd_to_rq(cmd))) {
478 struct scsi_driver *drv = scsi_cmd_to_driver(cmd);
480 if (drv->uninit_command)
481 drv->uninit_command(cmd);
485 void scsi_free_sgtables(struct scsi_cmnd *cmd)
487 if (cmd->sdb.table.nents)
488 sg_free_table_chained(&cmd->sdb.table,
490 if (scsi_prot_sg_count(cmd))
491 sg_free_table_chained(&cmd->prot_sdb->table,
492 SCSI_INLINE_PROT_SG_CNT);
494 EXPORT_SYMBOL_GPL(scsi_free_sgtables);
496 static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd)
498 scsi_free_sgtables(cmd);
499 scsi_uninit_cmd(cmd);
502 static void scsi_run_queue_async(struct scsi_device *sdev)
504 if (scsi_host_in_recovery(sdev->host))
507 if (scsi_target(sdev)->single_lun ||
508 !list_empty(&sdev->host->starved_list)) {
509 kblockd_schedule_work(&sdev->requeue_work);
512 * smp_mb() present in sbitmap_queue_clear() or implied in
513 * .end_io is for ordering writing .device_busy in
514 * scsi_device_unbusy() and reading sdev->restarts.
516 int old = atomic_read(&sdev->restarts);
519 * ->restarts has to be kept as non-zero if new budget
522 * No need to run queue when either another re-run
523 * queue wins in updating ->restarts or a new budget
526 if (old && atomic_cmpxchg(&sdev->restarts, old, 0) == old)
527 blk_mq_run_hw_queues(sdev->request_queue, true);
531 /* Returns false when no more bytes to process, true if there are more */
532 static bool scsi_end_request(struct request *req, blk_status_t error,
535 struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
536 struct scsi_device *sdev = cmd->device;
537 struct request_queue *q = sdev->request_queue;
539 if (blk_update_request(req, error, bytes))
543 if (blk_queue_add_random(q))
544 add_disk_randomness(req->q->disk);
546 if (!blk_rq_is_passthrough(req)) {
547 WARN_ON_ONCE(!(cmd->flags & SCMD_INITIALIZED));
548 cmd->flags &= ~SCMD_INITIALIZED;
552 * Calling rcu_barrier() is not necessary here because the
553 * SCSI error handler guarantees that the function called by
554 * call_rcu() has been called before scsi_end_request() is
557 destroy_rcu_head(&cmd->rcu);
560 * In the MQ case the command gets freed by __blk_mq_end_request,
561 * so we have to do all cleanup that depends on it earlier.
563 * We also can't kick the queues from irq context, so we
564 * will have to defer it to a workqueue.
566 scsi_mq_uninit_cmd(cmd);
569 * queue is still alive, so grab the ref for preventing it
570 * from being cleaned up during running queue.
572 percpu_ref_get(&q->q_usage_counter);
574 __blk_mq_end_request(req, error);
576 scsi_run_queue_async(sdev);
578 percpu_ref_put(&q->q_usage_counter);
583 * scsi_result_to_blk_status - translate a SCSI result code into blk_status_t
584 * @result: scsi error code
586 * Translate a SCSI result code into a blk_status_t value.
588 static blk_status_t scsi_result_to_blk_status(int result)
591 * Check the scsi-ml byte first in case we converted a host or status
594 switch (scsi_ml_byte(result)) {
597 case SCSIML_STAT_RESV_CONFLICT:
598 return BLK_STS_RESV_CONFLICT;
599 case SCSIML_STAT_NOSPC:
600 return BLK_STS_NOSPC;
601 case SCSIML_STAT_MED_ERROR:
602 return BLK_STS_MEDIUM;
603 case SCSIML_STAT_TGT_FAILURE:
604 return BLK_STS_TARGET;
605 case SCSIML_STAT_DL_TIMEOUT:
606 return BLK_STS_DURATION_LIMIT;
609 switch (host_byte(result)) {
611 if (scsi_status_is_good(result))
613 return BLK_STS_IOERR;
614 case DID_TRANSPORT_FAILFAST:
615 case DID_TRANSPORT_MARGINAL:
616 return BLK_STS_TRANSPORT;
618 return BLK_STS_IOERR;
623 * scsi_rq_err_bytes - determine number of bytes till the next failure boundary
624 * @rq: request to examine
627 * A request could be merge of IOs which require different failure
628 * handling. This function determines the number of bytes which
629 * can be failed from the beginning of the request without
630 * crossing into area which need to be retried further.
633 * The number of bytes to fail.
635 static unsigned int scsi_rq_err_bytes(const struct request *rq)
637 blk_opf_t ff = rq->cmd_flags & REQ_FAILFAST_MASK;
638 unsigned int bytes = 0;
641 if (!(rq->rq_flags & RQF_MIXED_MERGE))
642 return blk_rq_bytes(rq);
645 * Currently the only 'mixing' which can happen is between
646 * different fastfail types. We can safely fail portions
647 * which have all the failfast bits that the first one has -
648 * the ones which are at least as eager to fail as the first
651 for (bio = rq->bio; bio; bio = bio->bi_next) {
652 if ((bio->bi_opf & ff) != ff)
654 bytes += bio->bi_iter.bi_size;
657 /* this could lead to infinite loop */
658 BUG_ON(blk_rq_bytes(rq) && !bytes);
662 static bool scsi_cmd_runtime_exceeced(struct scsi_cmnd *cmd)
664 struct request *req = scsi_cmd_to_rq(cmd);
665 unsigned long wait_for;
667 if (cmd->allowed == SCSI_CMD_RETRIES_NO_LIMIT)
670 wait_for = (cmd->allowed + 1) * req->timeout;
671 if (time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) {
672 scmd_printk(KERN_ERR, cmd, "timing out command, waited %lus\n",
680 * When ALUA transition state is returned, reprep the cmd to
681 * use the ALUA handler's transition timeout. Delay the reprep
682 * 1 sec to avoid aggressive retries of the target in that
685 #define ALUA_TRANSITION_REPREP_DELAY 1000
687 /* Helper for scsi_io_completion() when special action required. */
688 static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result)
690 struct request *req = scsi_cmd_to_rq(cmd);
692 enum {ACTION_FAIL, ACTION_REPREP, ACTION_DELAYED_REPREP,
693 ACTION_RETRY, ACTION_DELAYED_RETRY} action;
694 struct scsi_sense_hdr sshdr;
696 bool sense_current = true; /* false implies "deferred sense" */
697 blk_status_t blk_stat;
699 sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
701 sense_current = !scsi_sense_is_deferred(&sshdr);
703 blk_stat = scsi_result_to_blk_status(result);
705 if (host_byte(result) == DID_RESET) {
706 /* Third party bus reset or reset for error recovery
707 * reasons. Just retry the command and see what
710 action = ACTION_RETRY;
711 } else if (sense_valid && sense_current) {
712 switch (sshdr.sense_key) {
714 if (cmd->device->removable) {
715 /* Detected disc change. Set a bit
716 * and quietly refuse further access.
718 cmd->device->changed = 1;
719 action = ACTION_FAIL;
721 /* Must have been a power glitch, or a
722 * bus reset. Could not have been a
723 * media change, so we just retry the
724 * command and see what happens.
726 action = ACTION_RETRY;
729 case ILLEGAL_REQUEST:
730 /* If we had an ILLEGAL REQUEST returned, then
731 * we may have performed an unsupported
732 * command. The only thing this should be
733 * would be a ten byte read where only a six
734 * byte read was supported. Also, on a system
735 * where READ CAPACITY failed, we may have
736 * read past the end of the disk.
738 if ((cmd->device->use_10_for_rw &&
739 sshdr.asc == 0x20 && sshdr.ascq == 0x00) &&
740 (cmd->cmnd[0] == READ_10 ||
741 cmd->cmnd[0] == WRITE_10)) {
742 /* This will issue a new 6-byte command. */
743 cmd->device->use_10_for_rw = 0;
744 action = ACTION_REPREP;
745 } else if (sshdr.asc == 0x10) /* DIX */ {
746 action = ACTION_FAIL;
747 blk_stat = BLK_STS_PROTECTION;
748 /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
749 } else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
750 action = ACTION_FAIL;
751 blk_stat = BLK_STS_TARGET;
753 action = ACTION_FAIL;
755 case ABORTED_COMMAND:
756 action = ACTION_FAIL;
757 if (sshdr.asc == 0x10) /* DIF */
758 blk_stat = BLK_STS_PROTECTION;
761 /* If the device is in the process of becoming
762 * ready, or has a temporary blockage, retry.
764 if (sshdr.asc == 0x04) {
765 switch (sshdr.ascq) {
766 case 0x01: /* becoming ready */
767 case 0x04: /* format in progress */
768 case 0x05: /* rebuild in progress */
769 case 0x06: /* recalculation in progress */
770 case 0x07: /* operation in progress */
771 case 0x08: /* Long write in progress */
772 case 0x09: /* self test in progress */
773 case 0x11: /* notify (enable spinup) required */
774 case 0x14: /* space allocation in progress */
775 case 0x1a: /* start stop unit in progress */
776 case 0x1b: /* sanitize in progress */
777 case 0x1d: /* configuration in progress */
778 case 0x24: /* depopulation in progress */
779 case 0x25: /* depopulation restore in progress */
780 action = ACTION_DELAYED_RETRY;
782 case 0x0a: /* ALUA state transition */
783 action = ACTION_DELAYED_REPREP;
786 action = ACTION_FAIL;
790 action = ACTION_FAIL;
792 case VOLUME_OVERFLOW:
793 /* See SSC3rXX or current. */
794 action = ACTION_FAIL;
797 action = ACTION_FAIL;
798 if ((sshdr.asc == 0x0C && sshdr.ascq == 0x12) ||
799 (sshdr.asc == 0x55 &&
800 (sshdr.ascq == 0x0E || sshdr.ascq == 0x0F))) {
801 /* Insufficient zone resources */
802 blk_stat = BLK_STS_ZONE_OPEN_RESOURCE;
808 action = ACTION_FAIL;
812 action = ACTION_FAIL;
814 if (action != ACTION_FAIL && scsi_cmd_runtime_exceeced(cmd))
815 action = ACTION_FAIL;
819 /* Give up and fail the remainder of the request */
820 if (!(req->rq_flags & RQF_QUIET)) {
821 static DEFINE_RATELIMIT_STATE(_rs,
822 DEFAULT_RATELIMIT_INTERVAL,
823 DEFAULT_RATELIMIT_BURST);
825 if (unlikely(scsi_logging_level))
827 SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
828 SCSI_LOG_MLCOMPLETE_BITS);
831 * if logging is enabled the failure will be printed
832 * in scsi_log_completion(), so avoid duplicate messages
834 if (!level && __ratelimit(&_rs)) {
835 scsi_print_result(cmd, NULL, FAILED);
837 scsi_print_sense(cmd);
838 scsi_print_command(cmd);
841 if (!scsi_end_request(req, blk_stat, scsi_rq_err_bytes(req)))
845 scsi_mq_requeue_cmd(cmd, 0);
847 case ACTION_DELAYED_REPREP:
848 scsi_mq_requeue_cmd(cmd, ALUA_TRANSITION_REPREP_DELAY);
851 /* Retry the same command immediately */
852 __scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY, false);
854 case ACTION_DELAYED_RETRY:
855 /* Retry the same command after a delay */
856 __scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY, false);
862 * Helper for scsi_io_completion() when cmd->result is non-zero. Returns a
863 * new result that may suppress further error checking. Also modifies
864 * *blk_statp in some cases.
866 static int scsi_io_completion_nz_result(struct scsi_cmnd *cmd, int result,
867 blk_status_t *blk_statp)
870 bool sense_current = true; /* false implies "deferred sense" */
871 struct request *req = scsi_cmd_to_rq(cmd);
872 struct scsi_sense_hdr sshdr;
874 sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
876 sense_current = !scsi_sense_is_deferred(&sshdr);
878 if (blk_rq_is_passthrough(req)) {
881 * SG_IO wants current and deferred errors
883 cmd->sense_len = min(8 + cmd->sense_buffer[7],
884 SCSI_SENSE_BUFFERSIZE);
887 *blk_statp = scsi_result_to_blk_status(result);
888 } else if (blk_rq_bytes(req) == 0 && sense_current) {
890 * Flush commands do not transfers any data, and thus cannot use
891 * good_bytes != blk_rq_bytes(req) as the signal for an error.
892 * This sets *blk_statp explicitly for the problem case.
894 *blk_statp = scsi_result_to_blk_status(result);
897 * Recovered errors need reporting, but they're always treated as
898 * success, so fiddle the result code here. For passthrough requests
899 * we already took a copy of the original into sreq->result which
900 * is what gets returned to the user
902 if (sense_valid && (sshdr.sense_key == RECOVERED_ERROR)) {
903 bool do_print = true;
905 * if ATA PASS-THROUGH INFORMATION AVAILABLE [0x0, 0x1d]
906 * skip print since caller wants ATA registers. Only occurs
907 * on SCSI ATA PASS_THROUGH commands when CK_COND=1
909 if ((sshdr.asc == 0x0) && (sshdr.ascq == 0x1d))
911 else if (req->rq_flags & RQF_QUIET)
914 scsi_print_sense(cmd);
916 /* for passthrough, *blk_statp may be set */
917 *blk_statp = BLK_STS_OK;
920 * Another corner case: the SCSI status byte is non-zero but 'good'.
921 * Example: PRE-FETCH command returns SAM_STAT_CONDITION_MET when
922 * it is able to fit nominated LBs in its cache (and SAM_STAT_GOOD
923 * if it can't fit). Treat SAM_STAT_CONDITION_MET and the related
924 * intermediate statuses (both obsolete in SAM-4) as good.
926 if ((result & 0xff) && scsi_status_is_good(result)) {
928 *blk_statp = BLK_STS_OK;
934 * scsi_io_completion - Completion processing for SCSI commands.
935 * @cmd: command that is finished.
936 * @good_bytes: number of processed bytes.
938 * We will finish off the specified number of sectors. If we are done, the
939 * command block will be released and the queue function will be goosed. If we
940 * are not done then we have to figure out what to do next:
942 * a) We can call scsi_mq_requeue_cmd(). The request will be
943 * unprepared and put back on the queue. Then a new command will
944 * be created for it. This should be used if we made forward
945 * progress, or if we want to switch from READ(10) to READ(6) for
948 * b) We can call scsi_io_completion_action(). The request will be
949 * put back on the queue and retried using the same command as
950 * before, possibly after a delay.
952 * c) We can call scsi_end_request() with blk_stat other than
953 * BLK_STS_OK, to fail the remainder of the request.
955 void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
957 int result = cmd->result;
958 struct request *req = scsi_cmd_to_rq(cmd);
959 blk_status_t blk_stat = BLK_STS_OK;
961 if (unlikely(result)) /* a nz result may or may not be an error */
962 result = scsi_io_completion_nz_result(cmd, result, &blk_stat);
965 * Next deal with any sectors which we were able to correctly
968 SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, cmd,
969 "%u sectors total, %d bytes done.\n",
970 blk_rq_sectors(req), good_bytes));
973 * Failed, zero length commands always need to drop down
974 * to retry code. Fast path should return in this block.
976 if (likely(blk_rq_bytes(req) > 0 || blk_stat == BLK_STS_OK)) {
977 if (likely(!scsi_end_request(req, blk_stat, good_bytes)))
978 return; /* no bytes remaining */
981 /* Kill remainder if no retries. */
982 if (unlikely(blk_stat && scsi_noretry_cmd(cmd))) {
983 if (scsi_end_request(req, blk_stat, blk_rq_bytes(req)))
985 "Bytes remaining after failed, no-retry command");
990 * If there had been no error, but we have leftover bytes in the
991 * request just queue the command up again.
993 if (likely(result == 0))
994 scsi_mq_requeue_cmd(cmd, 0);
996 scsi_io_completion_action(cmd, result);
999 static inline bool scsi_cmd_needs_dma_drain(struct scsi_device *sdev,
1002 return sdev->dma_drain_len && blk_rq_is_passthrough(rq) &&
1003 !op_is_write(req_op(rq)) &&
1004 sdev->host->hostt->dma_need_drain(rq);
1008 * scsi_alloc_sgtables - Allocate and initialize data and integrity scatterlists
1009 * @cmd: SCSI command data structure to initialize.
1011 * Initializes @cmd->sdb and also @cmd->prot_sdb if data integrity is enabled
1015 * * BLK_STS_OK - on success
1016 * * BLK_STS_RESOURCE - if the failure is retryable
1017 * * BLK_STS_IOERR - if the failure is fatal
1019 blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd)
1021 struct scsi_device *sdev = cmd->device;
1022 struct request *rq = scsi_cmd_to_rq(cmd);
1023 unsigned short nr_segs = blk_rq_nr_phys_segments(rq);
1024 struct scatterlist *last_sg = NULL;
1026 bool need_drain = scsi_cmd_needs_dma_drain(sdev, rq);
1029 if (WARN_ON_ONCE(!nr_segs))
1030 return BLK_STS_IOERR;
1033 * Make sure there is space for the drain. The driver must adjust
1034 * max_hw_segments to be prepared for this.
1040 * If sg table allocation fails, requeue request later.
1042 if (unlikely(sg_alloc_table_chained(&cmd->sdb.table, nr_segs,
1043 cmd->sdb.table.sgl, SCSI_INLINE_SG_CNT)))
1044 return BLK_STS_RESOURCE;
1047 * Next, walk the list, and fill in the addresses and sizes of
1050 count = __blk_rq_map_sg(rq->q, rq, cmd->sdb.table.sgl, &last_sg);
1052 if (blk_rq_bytes(rq) & rq->q->dma_pad_mask) {
1053 unsigned int pad_len =
1054 (rq->q->dma_pad_mask & ~blk_rq_bytes(rq)) + 1;
1056 last_sg->length += pad_len;
1057 cmd->extra_len += pad_len;
1061 sg_unmark_end(last_sg);
1062 last_sg = sg_next(last_sg);
1063 sg_set_buf(last_sg, sdev->dma_drain_buf, sdev->dma_drain_len);
1064 sg_mark_end(last_sg);
1066 cmd->extra_len += sdev->dma_drain_len;
1070 BUG_ON(count > cmd->sdb.table.nents);
1071 cmd->sdb.table.nents = count;
1072 cmd->sdb.length = blk_rq_payload_bytes(rq);
1074 if (blk_integrity_rq(rq)) {
1075 struct scsi_data_buffer *prot_sdb = cmd->prot_sdb;
1078 if (WARN_ON_ONCE(!prot_sdb)) {
1080 * This can happen if someone (e.g. multipath)
1081 * queues a command to a device on an adapter
1082 * that does not support DIX.
1084 ret = BLK_STS_IOERR;
1085 goto out_free_sgtables;
1088 ivecs = blk_rq_count_integrity_sg(rq->q, rq->bio);
1090 if (sg_alloc_table_chained(&prot_sdb->table, ivecs,
1091 prot_sdb->table.sgl,
1092 SCSI_INLINE_PROT_SG_CNT)) {
1093 ret = BLK_STS_RESOURCE;
1094 goto out_free_sgtables;
1097 count = blk_rq_map_integrity_sg(rq->q, rq->bio,
1098 prot_sdb->table.sgl);
1099 BUG_ON(count > ivecs);
1100 BUG_ON(count > queue_max_integrity_segments(rq->q));
1102 cmd->prot_sdb = prot_sdb;
1103 cmd->prot_sdb->table.nents = count;
1108 scsi_free_sgtables(cmd);
1111 EXPORT_SYMBOL(scsi_alloc_sgtables);
1114 * scsi_initialize_rq - initialize struct scsi_cmnd partially
1115 * @rq: Request associated with the SCSI command to be initialized.
1117 * This function initializes the members of struct scsi_cmnd that must be
1118 * initialized before request processing starts and that won't be
1119 * reinitialized if a SCSI command is requeued.
1121 static void scsi_initialize_rq(struct request *rq)
1123 struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
1125 memset(cmd->cmnd, 0, sizeof(cmd->cmnd));
1126 cmd->cmd_len = MAX_COMMAND_SIZE;
1128 init_rcu_head(&cmd->rcu);
1129 cmd->jiffies_at_alloc = jiffies;
1133 struct request *scsi_alloc_request(struct request_queue *q, blk_opf_t opf,
1134 blk_mq_req_flags_t flags)
1138 rq = blk_mq_alloc_request(q, opf, flags);
1140 scsi_initialize_rq(rq);
1143 EXPORT_SYMBOL_GPL(scsi_alloc_request);
1146 * Only called when the request isn't completed by SCSI, and not freed by
1149 static void scsi_cleanup_rq(struct request *rq)
1151 if (rq->rq_flags & RQF_DONTPREP) {
1152 scsi_mq_uninit_cmd(blk_mq_rq_to_pdu(rq));
1153 rq->rq_flags &= ~RQF_DONTPREP;
1157 /* Called before a request is prepared. See also scsi_mq_prep_fn(). */
1158 void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd)
1160 struct request *rq = scsi_cmd_to_rq(cmd);
1162 if (!blk_rq_is_passthrough(rq) && !(cmd->flags & SCMD_INITIALIZED)) {
1163 cmd->flags |= SCMD_INITIALIZED;
1164 scsi_initialize_rq(rq);
1168 INIT_LIST_HEAD(&cmd->eh_entry);
1169 INIT_DELAYED_WORK(&cmd->abort_work, scmd_eh_abort_handler);
1172 static blk_status_t scsi_setup_scsi_cmnd(struct scsi_device *sdev,
1173 struct request *req)
1175 struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
1178 * Passthrough requests may transfer data, in which case they must
1179 * a bio attached to them. Or they might contain a SCSI command
1180 * that does not transfer data, in which case they may optionally
1181 * submit a request without an attached bio.
1184 blk_status_t ret = scsi_alloc_sgtables(cmd);
1185 if (unlikely(ret != BLK_STS_OK))
1188 BUG_ON(blk_rq_bytes(req));
1190 memset(&cmd->sdb, 0, sizeof(cmd->sdb));
1193 cmd->transfersize = blk_rq_bytes(req);
1198 scsi_device_state_check(struct scsi_device *sdev, struct request *req)
1200 switch (sdev->sdev_state) {
1204 case SDEV_TRANSPORT_OFFLINE:
1206 * If the device is offline we refuse to process any
1207 * commands. The device must be brought online
1208 * before trying any recovery commands.
1210 if (!sdev->offline_already) {
1211 sdev->offline_already = true;
1212 sdev_printk(KERN_ERR, sdev,
1213 "rejecting I/O to offline device\n");
1215 return BLK_STS_IOERR;
1218 * If the device is fully deleted, we refuse to
1219 * process any commands as well.
1221 sdev_printk(KERN_ERR, sdev,
1222 "rejecting I/O to dead device\n");
1223 return BLK_STS_IOERR;
1225 case SDEV_CREATED_BLOCK:
1226 return BLK_STS_RESOURCE;
1229 * If the device is blocked we only accept power management
1232 if (req && WARN_ON_ONCE(!(req->rq_flags & RQF_PM)))
1233 return BLK_STS_RESOURCE;
1237 * For any other not fully online state we only allow
1238 * power management commands.
1240 if (req && !(req->rq_flags & RQF_PM))
1241 return BLK_STS_OFFLINE;
1247 * scsi_dev_queue_ready: if we can send requests to sdev, assign one token
1248 * and return the token else return -1.
1250 static inline int scsi_dev_queue_ready(struct request_queue *q,
1251 struct scsi_device *sdev)
1255 token = sbitmap_get(&sdev->budget_map);
1259 if (!atomic_read(&sdev->device_blocked))
1263 * Only unblock if no other commands are pending and
1264 * if device_blocked has decreased to zero
1266 if (scsi_device_busy(sdev) > 1 ||
1267 atomic_dec_return(&sdev->device_blocked) > 0) {
1268 sbitmap_put(&sdev->budget_map, token);
1272 SCSI_LOG_MLQUEUE(3, sdev_printk(KERN_INFO, sdev,
1273 "unblocking device at zero depth\n"));
1279 * scsi_target_queue_ready: checks if there we can send commands to target
1280 * @sdev: scsi device on starget to check.
1282 static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
1283 struct scsi_device *sdev)
1285 struct scsi_target *starget = scsi_target(sdev);
1288 if (starget->single_lun) {
1289 spin_lock_irq(shost->host_lock);
1290 if (starget->starget_sdev_user &&
1291 starget->starget_sdev_user != sdev) {
1292 spin_unlock_irq(shost->host_lock);
1295 starget->starget_sdev_user = sdev;
1296 spin_unlock_irq(shost->host_lock);
1299 if (starget->can_queue <= 0)
1302 busy = atomic_inc_return(&starget->target_busy) - 1;
1303 if (atomic_read(&starget->target_blocked) > 0) {
1308 * unblock after target_blocked iterates to zero
1310 if (atomic_dec_return(&starget->target_blocked) > 0)
1313 SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
1314 "unblocking target at zero depth\n"));
1317 if (busy >= starget->can_queue)
1323 spin_lock_irq(shost->host_lock);
1324 list_move_tail(&sdev->starved_entry, &shost->starved_list);
1325 spin_unlock_irq(shost->host_lock);
1327 if (starget->can_queue > 0)
1328 atomic_dec(&starget->target_busy);
1333 * scsi_host_queue_ready: if we can send requests to shost, return 1 else
1334 * return 0. We must end up running the queue again whenever 0 is
1335 * returned, else IO can hang.
1337 static inline int scsi_host_queue_ready(struct request_queue *q,
1338 struct Scsi_Host *shost,
1339 struct scsi_device *sdev,
1340 struct scsi_cmnd *cmd)
1342 if (atomic_read(&shost->host_blocked) > 0) {
1343 if (scsi_host_busy(shost) > 0)
1347 * unblock after host_blocked iterates to zero
1349 if (atomic_dec_return(&shost->host_blocked) > 0)
1353 shost_printk(KERN_INFO, shost,
1354 "unblocking host at zero depth\n"));
1357 if (shost->host_self_blocked)
1360 /* We're OK to process the command, so we can't be starved */
1361 if (!list_empty(&sdev->starved_entry)) {
1362 spin_lock_irq(shost->host_lock);
1363 if (!list_empty(&sdev->starved_entry))
1364 list_del_init(&sdev->starved_entry);
1365 spin_unlock_irq(shost->host_lock);
1368 __set_bit(SCMD_STATE_INFLIGHT, &cmd->state);
1373 spin_lock_irq(shost->host_lock);
1374 if (list_empty(&sdev->starved_entry))
1375 list_add_tail(&sdev->starved_entry, &shost->starved_list);
1376 spin_unlock_irq(shost->host_lock);
1378 scsi_dec_host_busy(shost, cmd);
1383 * Busy state exporting function for request stacking drivers.
1385 * For efficiency, no lock is taken to check the busy state of
1386 * shost/starget/sdev, since the returned value is not guaranteed and
1387 * may be changed after request stacking drivers call the function,
1388 * regardless of taking lock or not.
1390 * When scsi can't dispatch I/Os anymore and needs to kill I/Os scsi
1391 * needs to return 'not busy'. Otherwise, request stacking drivers
1392 * may hold requests forever.
1394 static bool scsi_mq_lld_busy(struct request_queue *q)
1396 struct scsi_device *sdev = q->queuedata;
1397 struct Scsi_Host *shost;
1399 if (blk_queue_dying(q))
1405 * Ignore host/starget busy state.
1406 * Since block layer does not have a concept of fairness across
1407 * multiple queues, congestion of host/starget needs to be handled
1410 if (scsi_host_in_recovery(shost) || scsi_device_is_busy(sdev))
1417 * Block layer request completion callback. May be called from interrupt
1420 static void scsi_complete(struct request *rq)
1422 struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
1423 enum scsi_disposition disposition;
1425 INIT_LIST_HEAD(&cmd->eh_entry);
1427 atomic_inc(&cmd->device->iodone_cnt);
1429 atomic_inc(&cmd->device->ioerr_cnt);
1431 disposition = scsi_decide_disposition(cmd);
1432 if (disposition != SUCCESS && scsi_cmd_runtime_exceeced(cmd))
1433 disposition = SUCCESS;
1435 scsi_log_completion(cmd, disposition);
1437 switch (disposition) {
1439 scsi_finish_command(cmd);
1442 scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY);
1444 case ADD_TO_MLQUEUE:
1445 scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
1448 scsi_eh_scmd_add(cmd);
1454 * scsi_dispatch_cmd - Dispatch a command to the low-level driver.
1455 * @cmd: command block we are dispatching.
1457 * Return: nonzero return request was rejected and device's queue needs to be
1460 static int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
1462 struct Scsi_Host *host = cmd->device->host;
1465 atomic_inc(&cmd->device->iorequest_cnt);
1467 /* check if the device is still usable */
1468 if (unlikely(cmd->device->sdev_state == SDEV_DEL)) {
1469 /* in SDEV_DEL we error all commands. DID_NO_CONNECT
1470 * returns an immediate error upwards, and signals
1471 * that the device is no longer present */
1472 cmd->result = DID_NO_CONNECT << 16;
1476 /* Check to see if the scsi lld made this device blocked. */
1477 if (unlikely(scsi_device_blocked(cmd->device))) {
1479 * in blocked state, the command is just put back on
1480 * the device queue. The suspend state has already
1481 * blocked the queue so future requests should not
1482 * occur until the device transitions out of the
1485 SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
1486 "queuecommand : device blocked\n"));
1487 atomic_dec(&cmd->device->iorequest_cnt);
1488 return SCSI_MLQUEUE_DEVICE_BUSY;
1491 /* Store the LUN value in cmnd, if needed. */
1492 if (cmd->device->lun_in_cdb)
1493 cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
1494 (cmd->device->lun << 5 & 0xe0);
1499 * Before we queue this command, check if the command
1500 * length exceeds what the host adapter can handle.
1502 if (cmd->cmd_len > cmd->device->host->max_cmd_len) {
1503 SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
1504 "queuecommand : command too long. "
1505 "cdb_size=%d host->max_cmd_len=%d\n",
1506 cmd->cmd_len, cmd->device->host->max_cmd_len));
1507 cmd->result = (DID_ABORT << 16);
1511 if (unlikely(host->shost_state == SHOST_DEL)) {
1512 cmd->result = (DID_NO_CONNECT << 16);
1517 trace_scsi_dispatch_cmd_start(cmd);
1518 rtn = host->hostt->queuecommand(host, cmd);
1520 atomic_dec(&cmd->device->iorequest_cnt);
1521 trace_scsi_dispatch_cmd_error(cmd, rtn);
1522 if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
1523 rtn != SCSI_MLQUEUE_TARGET_BUSY)
1524 rtn = SCSI_MLQUEUE_HOST_BUSY;
1526 SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
1527 "queuecommand : request rejected\n"));
1536 /* Size in bytes of the sg-list stored in the scsi-mq command-private data. */
1537 static unsigned int scsi_mq_inline_sgl_size(struct Scsi_Host *shost)
1539 return min_t(unsigned int, shost->sg_tablesize, SCSI_INLINE_SG_CNT) *
1540 sizeof(struct scatterlist);
1543 static blk_status_t scsi_prepare_cmd(struct request *req)
1545 struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
1546 struct scsi_device *sdev = req->q->queuedata;
1547 struct Scsi_Host *shost = sdev->host;
1548 bool in_flight = test_bit(SCMD_STATE_INFLIGHT, &cmd->state);
1549 struct scatterlist *sg;
1551 scsi_init_command(sdev, cmd);
1555 cmd->prot_flags = 0;
1557 memset(&cmd->sdb, 0, sizeof(cmd->sdb));
1559 cmd->transfersize = 0;
1560 cmd->host_scribble = NULL;
1565 __set_bit(SCMD_STATE_INFLIGHT, &cmd->state);
1568 * Only clear the driver-private command data if the LLD does not supply
1569 * a function to initialize that data.
1571 if (!shost->hostt->init_cmd_priv)
1572 memset(cmd + 1, 0, shost->hostt->cmd_size);
1574 cmd->prot_op = SCSI_PROT_NORMAL;
1575 if (blk_rq_bytes(req))
1576 cmd->sc_data_direction = rq_dma_dir(req);
1578 cmd->sc_data_direction = DMA_NONE;
1580 sg = (void *)cmd + sizeof(struct scsi_cmnd) + shost->hostt->cmd_size;
1581 cmd->sdb.table.sgl = sg;
1583 if (scsi_host_get_prot(shost)) {
1584 memset(cmd->prot_sdb, 0, sizeof(struct scsi_data_buffer));
1586 cmd->prot_sdb->table.sgl =
1587 (struct scatterlist *)(cmd->prot_sdb + 1);
1591 * Special handling for passthrough commands, which don't go to the ULP
1594 if (blk_rq_is_passthrough(req))
1595 return scsi_setup_scsi_cmnd(sdev, req);
1597 if (sdev->handler && sdev->handler->prep_fn) {
1598 blk_status_t ret = sdev->handler->prep_fn(sdev, req);
1600 if (ret != BLK_STS_OK)
1604 /* Usually overridden by the ULP */
1606 memset(cmd->cmnd, 0, sizeof(cmd->cmnd));
1607 return scsi_cmd_to_driver(cmd)->init_command(cmd);
1610 static void scsi_done_internal(struct scsi_cmnd *cmd, bool complete_directly)
1612 struct request *req = scsi_cmd_to_rq(cmd);
1614 switch (cmd->submitter) {
1615 case SUBMITTED_BY_BLOCK_LAYER:
1617 case SUBMITTED_BY_SCSI_ERROR_HANDLER:
1618 return scsi_eh_done(cmd);
1619 case SUBMITTED_BY_SCSI_RESET_IOCTL:
1623 if (unlikely(blk_should_fake_timeout(scsi_cmd_to_rq(cmd)->q)))
1625 if (unlikely(test_and_set_bit(SCMD_STATE_COMPLETE, &cmd->state)))
1627 trace_scsi_dispatch_cmd_done(cmd);
1629 if (complete_directly)
1630 blk_mq_complete_request_direct(req, scsi_complete);
1632 blk_mq_complete_request(req);
1635 void scsi_done(struct scsi_cmnd *cmd)
1637 scsi_done_internal(cmd, false);
1639 EXPORT_SYMBOL(scsi_done);
1641 void scsi_done_direct(struct scsi_cmnd *cmd)
1643 scsi_done_internal(cmd, true);
1645 EXPORT_SYMBOL(scsi_done_direct);
1647 static void scsi_mq_put_budget(struct request_queue *q, int budget_token)
1649 struct scsi_device *sdev = q->queuedata;
1651 sbitmap_put(&sdev->budget_map, budget_token);
1655 * When to reinvoke queueing after a resource shortage. It's 3 msecs to
1656 * not change behaviour from the previous unplug mechanism, experimentation
1657 * may prove this needs changing.
1659 #define SCSI_QUEUE_DELAY 3
1661 static int scsi_mq_get_budget(struct request_queue *q)
1663 struct scsi_device *sdev = q->queuedata;
1664 int token = scsi_dev_queue_ready(q, sdev);
1669 atomic_inc(&sdev->restarts);
1672 * Orders atomic_inc(&sdev->restarts) and atomic_read(&sdev->device_busy).
1673 * .restarts must be incremented before .device_busy is read because the
1674 * code in scsi_run_queue_async() depends on the order of these operations.
1676 smp_mb__after_atomic();
1679 * If all in-flight requests originated from this LUN are completed
1680 * before reading .device_busy, sdev->device_busy will be observed as
1681 * zero, then blk_mq_delay_run_hw_queues() will dispatch this request
1682 * soon. Otherwise, completion of one of these requests will observe
1683 * the .restarts flag, and the request queue will be run for handling
1684 * this request, see scsi_end_request().
1686 if (unlikely(scsi_device_busy(sdev) == 0 &&
1687 !scsi_device_blocked(sdev)))
1688 blk_mq_delay_run_hw_queues(sdev->request_queue, SCSI_QUEUE_DELAY);
1692 static void scsi_mq_set_rq_budget_token(struct request *req, int token)
1694 struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
1696 cmd->budget_token = token;
1699 static int scsi_mq_get_rq_budget_token(struct request *req)
1701 struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
1703 return cmd->budget_token;
1706 static blk_status_t scsi_queue_rq(struct blk_mq_hw_ctx *hctx,
1707 const struct blk_mq_queue_data *bd)
1709 struct request *req = bd->rq;
1710 struct request_queue *q = req->q;
1711 struct scsi_device *sdev = q->queuedata;
1712 struct Scsi_Host *shost = sdev->host;
1713 struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
1717 WARN_ON_ONCE(cmd->budget_token < 0);
1720 * If the device is not in running state we will reject some or all
1723 if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
1724 ret = scsi_device_state_check(sdev, req);
1725 if (ret != BLK_STS_OK)
1726 goto out_put_budget;
1729 ret = BLK_STS_RESOURCE;
1730 if (!scsi_target_queue_ready(shost, sdev))
1731 goto out_put_budget;
1732 if (unlikely(scsi_host_in_recovery(shost))) {
1733 if (cmd->flags & SCMD_FAIL_IF_RECOVERING)
1734 ret = BLK_STS_OFFLINE;
1735 goto out_dec_target_busy;
1737 if (!scsi_host_queue_ready(q, shost, sdev, cmd))
1738 goto out_dec_target_busy;
1740 if (!(req->rq_flags & RQF_DONTPREP)) {
1741 ret = scsi_prepare_cmd(req);
1742 if (ret != BLK_STS_OK)
1743 goto out_dec_host_busy;
1744 req->rq_flags |= RQF_DONTPREP;
1746 clear_bit(SCMD_STATE_COMPLETE, &cmd->state);
1749 cmd->flags &= SCMD_PRESERVED_FLAGS;
1750 if (sdev->simple_tags)
1751 cmd->flags |= SCMD_TAGGED;
1753 cmd->flags |= SCMD_LAST;
1755 scsi_set_resid(cmd, 0);
1756 memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1757 cmd->submitter = SUBMITTED_BY_BLOCK_LAYER;
1759 blk_mq_start_request(req);
1760 reason = scsi_dispatch_cmd(cmd);
1762 scsi_set_blocked(cmd, reason);
1763 ret = BLK_STS_RESOURCE;
1764 goto out_dec_host_busy;
1770 scsi_dec_host_busy(shost, cmd);
1771 out_dec_target_busy:
1772 if (scsi_target(sdev)->can_queue > 0)
1773 atomic_dec(&scsi_target(sdev)->target_busy);
1775 scsi_mq_put_budget(q, cmd->budget_token);
1776 cmd->budget_token = -1;
1780 case BLK_STS_RESOURCE:
1781 case BLK_STS_ZONE_RESOURCE:
1782 if (scsi_device_blocked(sdev))
1783 ret = BLK_STS_DEV_RESOURCE;
1786 cmd->result = DID_BUS_BUSY << 16;
1787 if (req->rq_flags & RQF_DONTPREP)
1788 scsi_mq_uninit_cmd(cmd);
1791 if (unlikely(!scsi_device_online(sdev)))
1792 cmd->result = DID_NO_CONNECT << 16;
1794 cmd->result = DID_ERROR << 16;
1796 * Make sure to release all allocated resources when
1797 * we hit an error, as we will never see this command
1800 if (req->rq_flags & RQF_DONTPREP)
1801 scsi_mq_uninit_cmd(cmd);
1802 scsi_run_queue_async(sdev);
1808 static int scsi_mq_init_request(struct blk_mq_tag_set *set, struct request *rq,
1809 unsigned int hctx_idx, unsigned int numa_node)
1811 struct Scsi_Host *shost = set->driver_data;
1812 struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
1813 struct scatterlist *sg;
1817 kmem_cache_alloc_node(scsi_sense_cache, GFP_KERNEL, numa_node);
1818 if (!cmd->sense_buffer)
1821 if (scsi_host_get_prot(shost)) {
1822 sg = (void *)cmd + sizeof(struct scsi_cmnd) +
1823 shost->hostt->cmd_size;
1824 cmd->prot_sdb = (void *)sg + scsi_mq_inline_sgl_size(shost);
1827 if (shost->hostt->init_cmd_priv) {
1828 ret = shost->hostt->init_cmd_priv(shost, cmd);
1830 kmem_cache_free(scsi_sense_cache, cmd->sense_buffer);
1836 static void scsi_mq_exit_request(struct blk_mq_tag_set *set, struct request *rq,
1837 unsigned int hctx_idx)
1839 struct Scsi_Host *shost = set->driver_data;
1840 struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
1842 if (shost->hostt->exit_cmd_priv)
1843 shost->hostt->exit_cmd_priv(shost, cmd);
1844 kmem_cache_free(scsi_sense_cache, cmd->sense_buffer);
1848 static int scsi_mq_poll(struct blk_mq_hw_ctx *hctx, struct io_comp_batch *iob)
1850 struct Scsi_Host *shost = hctx->driver_data;
1852 if (shost->hostt->mq_poll)
1853 return shost->hostt->mq_poll(shost, hctx->queue_num);
1858 static int scsi_init_hctx(struct blk_mq_hw_ctx *hctx, void *data,
1859 unsigned int hctx_idx)
1861 struct Scsi_Host *shost = data;
1863 hctx->driver_data = shost;
1867 static void scsi_map_queues(struct blk_mq_tag_set *set)
1869 struct Scsi_Host *shost = container_of(set, struct Scsi_Host, tag_set);
1871 if (shost->hostt->map_queues)
1872 return shost->hostt->map_queues(shost);
1873 blk_mq_map_queues(&set->map[HCTX_TYPE_DEFAULT]);
1876 void __scsi_init_queue(struct Scsi_Host *shost, struct request_queue *q)
1878 struct device *dev = shost->dma_dev;
1881 * this limit is imposed by hardware restrictions
1883 blk_queue_max_segments(q, min_t(unsigned short, shost->sg_tablesize,
1886 if (scsi_host_prot_dma(shost)) {
1887 shost->sg_prot_tablesize =
1888 min_not_zero(shost->sg_prot_tablesize,
1889 (unsigned short)SCSI_MAX_PROT_SG_SEGMENTS);
1890 BUG_ON(shost->sg_prot_tablesize < shost->sg_tablesize);
1891 blk_queue_max_integrity_segments(q, shost->sg_prot_tablesize);
1894 blk_queue_max_hw_sectors(q, shost->max_sectors);
1895 blk_queue_segment_boundary(q, shost->dma_boundary);
1896 dma_set_seg_boundary(dev, shost->dma_boundary);
1898 blk_queue_max_segment_size(q, shost->max_segment_size);
1899 blk_queue_virt_boundary(q, shost->virt_boundary_mask);
1900 dma_set_max_seg_size(dev, queue_max_segment_size(q));
1903 * Set a reasonable default alignment: The larger of 32-byte (dword),
1904 * which is a common minimum for HBAs, and the minimum DMA alignment,
1905 * which is set by the platform.
1907 * Devices that require a bigger alignment can increase it later.
1909 blk_queue_dma_alignment(q, max(4, dma_get_cache_alignment()) - 1);
1911 EXPORT_SYMBOL_GPL(__scsi_init_queue);
1913 static const struct blk_mq_ops scsi_mq_ops_no_commit = {
1914 .get_budget = scsi_mq_get_budget,
1915 .put_budget = scsi_mq_put_budget,
1916 .queue_rq = scsi_queue_rq,
1917 .complete = scsi_complete,
1918 .timeout = scsi_timeout,
1919 #ifdef CONFIG_BLK_DEBUG_FS
1920 .show_rq = scsi_show_rq,
1922 .init_request = scsi_mq_init_request,
1923 .exit_request = scsi_mq_exit_request,
1924 .cleanup_rq = scsi_cleanup_rq,
1925 .busy = scsi_mq_lld_busy,
1926 .map_queues = scsi_map_queues,
1927 .init_hctx = scsi_init_hctx,
1928 .poll = scsi_mq_poll,
1929 .set_rq_budget_token = scsi_mq_set_rq_budget_token,
1930 .get_rq_budget_token = scsi_mq_get_rq_budget_token,
1934 static void scsi_commit_rqs(struct blk_mq_hw_ctx *hctx)
1936 struct Scsi_Host *shost = hctx->driver_data;
1938 shost->hostt->commit_rqs(shost, hctx->queue_num);
1941 static const struct blk_mq_ops scsi_mq_ops = {
1942 .get_budget = scsi_mq_get_budget,
1943 .put_budget = scsi_mq_put_budget,
1944 .queue_rq = scsi_queue_rq,
1945 .commit_rqs = scsi_commit_rqs,
1946 .complete = scsi_complete,
1947 .timeout = scsi_timeout,
1948 #ifdef CONFIG_BLK_DEBUG_FS
1949 .show_rq = scsi_show_rq,
1951 .init_request = scsi_mq_init_request,
1952 .exit_request = scsi_mq_exit_request,
1953 .cleanup_rq = scsi_cleanup_rq,
1954 .busy = scsi_mq_lld_busy,
1955 .map_queues = scsi_map_queues,
1956 .init_hctx = scsi_init_hctx,
1957 .poll = scsi_mq_poll,
1958 .set_rq_budget_token = scsi_mq_set_rq_budget_token,
1959 .get_rq_budget_token = scsi_mq_get_rq_budget_token,
1962 int scsi_mq_setup_tags(struct Scsi_Host *shost)
1964 unsigned int cmd_size, sgl_size;
1965 struct blk_mq_tag_set *tag_set = &shost->tag_set;
1967 sgl_size = max_t(unsigned int, sizeof(struct scatterlist),
1968 scsi_mq_inline_sgl_size(shost));
1969 cmd_size = sizeof(struct scsi_cmnd) + shost->hostt->cmd_size + sgl_size;
1970 if (scsi_host_get_prot(shost))
1971 cmd_size += sizeof(struct scsi_data_buffer) +
1972 sizeof(struct scatterlist) * SCSI_INLINE_PROT_SG_CNT;
1974 memset(tag_set, 0, sizeof(*tag_set));
1975 if (shost->hostt->commit_rqs)
1976 tag_set->ops = &scsi_mq_ops;
1978 tag_set->ops = &scsi_mq_ops_no_commit;
1979 tag_set->nr_hw_queues = shost->nr_hw_queues ? : 1;
1980 tag_set->nr_maps = shost->nr_maps ? : 1;
1981 tag_set->queue_depth = shost->can_queue;
1982 tag_set->cmd_size = cmd_size;
1983 tag_set->numa_node = dev_to_node(shost->dma_dev);
1984 tag_set->flags = BLK_MQ_F_SHOULD_MERGE;
1986 BLK_ALLOC_POLICY_TO_MQ_FLAG(shost->hostt->tag_alloc_policy);
1987 if (shost->queuecommand_may_block)
1988 tag_set->flags |= BLK_MQ_F_BLOCKING;
1989 tag_set->driver_data = shost;
1990 if (shost->host_tagset)
1991 tag_set->flags |= BLK_MQ_F_TAG_HCTX_SHARED;
1993 return blk_mq_alloc_tag_set(tag_set);
1996 void scsi_mq_free_tags(struct kref *kref)
1998 struct Scsi_Host *shost = container_of(kref, typeof(*shost),
2001 blk_mq_free_tag_set(&shost->tag_set);
2002 complete(&shost->tagset_freed);
2006 * scsi_device_from_queue - return sdev associated with a request_queue
2007 * @q: The request queue to return the sdev from
2009 * Return the sdev associated with a request queue or NULL if the
2010 * request_queue does not reference a SCSI device.
2012 struct scsi_device *scsi_device_from_queue(struct request_queue *q)
2014 struct scsi_device *sdev = NULL;
2016 if (q->mq_ops == &scsi_mq_ops_no_commit ||
2017 q->mq_ops == &scsi_mq_ops)
2018 sdev = q->queuedata;
2019 if (!sdev || !get_device(&sdev->sdev_gendev))
2025 * pktcdvd should have been integrated into the SCSI layers, but for historical
2026 * reasons like the old IDE driver it isn't. This export allows it to safely
2027 * probe if a given device is a SCSI one and only attach to that.
2029 #ifdef CONFIG_CDROM_PKTCDVD_MODULE
2030 EXPORT_SYMBOL_GPL(scsi_device_from_queue);
2034 * scsi_block_requests - Utility function used by low-level drivers to prevent
2035 * further commands from being queued to the device.
2036 * @shost: host in question
2038 * There is no timer nor any other means by which the requests get unblocked
2039 * other than the low-level driver calling scsi_unblock_requests().
2041 void scsi_block_requests(struct Scsi_Host *shost)
2043 shost->host_self_blocked = 1;
2045 EXPORT_SYMBOL(scsi_block_requests);
2048 * scsi_unblock_requests - Utility function used by low-level drivers to allow
2049 * further commands to be queued to the device.
2050 * @shost: host in question
2052 * There is no timer nor any other means by which the requests get unblocked
2053 * other than the low-level driver calling scsi_unblock_requests(). This is done
2054 * as an API function so that changes to the internals of the scsi mid-layer
2055 * won't require wholesale changes to drivers that use this feature.
2057 void scsi_unblock_requests(struct Scsi_Host *shost)
2059 shost->host_self_blocked = 0;
2060 scsi_run_host_queues(shost);
2062 EXPORT_SYMBOL(scsi_unblock_requests);
2064 void scsi_exit_queue(void)
2066 kmem_cache_destroy(scsi_sense_cache);
2070 * scsi_mode_select - issue a mode select
2071 * @sdev: SCSI device to be queried
2072 * @pf: Page format bit (1 == standard, 0 == vendor specific)
2073 * @sp: Save page bit (0 == don't save, 1 == save)
2074 * @buffer: request buffer (may not be smaller than eight bytes)
2075 * @len: length of request buffer.
2076 * @timeout: command timeout
2077 * @retries: number of retries before failing
2078 * @data: returns a structure abstracting the mode header data
2079 * @sshdr: place to put sense data (or NULL if no sense to be collected).
2080 * must be SCSI_SENSE_BUFFERSIZE big.
2082 * Returns zero if successful; negative error number or scsi
2086 int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
2087 unsigned char *buffer, int len, int timeout, int retries,
2088 struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr)
2090 unsigned char cmd[10];
2091 unsigned char *real_buffer;
2092 const struct scsi_exec_args exec_args = {
2097 memset(cmd, 0, sizeof(cmd));
2098 cmd[1] = (pf ? 0x10 : 0) | (sp ? 0x01 : 0);
2101 * Use MODE SELECT(10) if the device asked for it or if the mode page
2102 * and the mode select header cannot fit within the maximumm 255 bytes
2103 * of the MODE SELECT(6) command.
2105 if (sdev->use_10_for_ms ||
2107 data->block_descriptor_length > 255) {
2108 if (len > 65535 - 8)
2110 real_buffer = kmalloc(8 + len, GFP_KERNEL);
2113 memcpy(real_buffer + 8, buffer, len);
2117 real_buffer[2] = data->medium_type;
2118 real_buffer[3] = data->device_specific;
2119 real_buffer[4] = data->longlba ? 0x01 : 0;
2121 put_unaligned_be16(data->block_descriptor_length,
2124 cmd[0] = MODE_SELECT_10;
2125 put_unaligned_be16(len, &cmd[7]);
2130 real_buffer = kmalloc(4 + len, GFP_KERNEL);
2133 memcpy(real_buffer + 4, buffer, len);
2136 real_buffer[1] = data->medium_type;
2137 real_buffer[2] = data->device_specific;
2138 real_buffer[3] = data->block_descriptor_length;
2140 cmd[0] = MODE_SELECT;
2144 ret = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_OUT, real_buffer, len,
2145 timeout, retries, &exec_args);
2149 EXPORT_SYMBOL_GPL(scsi_mode_select);
2152 * scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary.
2153 * @sdev: SCSI device to be queried
2154 * @dbd: set to prevent mode sense from returning block descriptors
2155 * @modepage: mode page being requested
2156 * @subpage: sub-page of the mode page being requested
2157 * @buffer: request buffer (may not be smaller than eight bytes)
2158 * @len: length of request buffer.
2159 * @timeout: command timeout
2160 * @retries: number of retries before failing
2161 * @data: returns a structure abstracting the mode header data
2162 * @sshdr: place to put sense data (or NULL if no sense to be collected).
2163 * must be SCSI_SENSE_BUFFERSIZE big.
2165 * Returns zero if successful, or a negative error number on failure
2168 scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, int subpage,
2169 unsigned char *buffer, int len, int timeout, int retries,
2170 struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr)
2172 unsigned char cmd[12];
2175 int result, retry_count = retries;
2176 struct scsi_sense_hdr my_sshdr;
2177 const struct scsi_exec_args exec_args = {
2178 /* caller might not be interested in sense, but we need it */
2179 .sshdr = sshdr ? : &my_sshdr,
2182 memset(data, 0, sizeof(*data));
2183 memset(&cmd[0], 0, 12);
2185 dbd = sdev->set_dbd_for_ms ? 8 : dbd;
2186 cmd[1] = dbd & 0x18; /* allows DBD and LLBA bits */
2190 sshdr = exec_args.sshdr;
2193 use_10_for_ms = sdev->use_10_for_ms || len > 255;
2195 if (use_10_for_ms) {
2196 if (len < 8 || len > 65535)
2199 cmd[0] = MODE_SENSE_10;
2200 put_unaligned_be16(len, &cmd[7]);
2206 cmd[0] = MODE_SENSE;
2211 memset(buffer, 0, len);
2213 result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_IN, buffer, len,
2214 timeout, retries, &exec_args);
2218 /* This code looks awful: what it's doing is making sure an
2219 * ILLEGAL REQUEST sense return identifies the actual command
2220 * byte as the problem. MODE_SENSE commands can return
2221 * ILLEGAL REQUEST if the code page isn't supported */
2223 if (!scsi_status_is_good(result)) {
2224 if (scsi_sense_valid(sshdr)) {
2225 if ((sshdr->sense_key == ILLEGAL_REQUEST) &&
2226 (sshdr->asc == 0x20) && (sshdr->ascq == 0)) {
2228 * Invalid command operation code: retry using
2229 * MODE SENSE(6) if this was a MODE SENSE(10)
2230 * request, except if the request mode page is
2231 * too large for MODE SENSE single byte
2232 * allocation length field.
2234 if (use_10_for_ms) {
2237 sdev->use_10_for_ms = 0;
2241 if (scsi_status_is_check_condition(result) &&
2242 sshdr->sense_key == UNIT_ATTENTION &&
2250 if (unlikely(buffer[0] == 0x86 && buffer[1] == 0x0b &&
2251 (modepage == 6 || modepage == 8))) {
2252 /* Initio breakage? */
2255 data->medium_type = 0;
2256 data->device_specific = 0;
2258 data->block_descriptor_length = 0;
2259 } else if (use_10_for_ms) {
2260 data->length = get_unaligned_be16(&buffer[0]) + 2;
2261 data->medium_type = buffer[2];
2262 data->device_specific = buffer[3];
2263 data->longlba = buffer[4] & 0x01;
2264 data->block_descriptor_length = get_unaligned_be16(&buffer[6]);
2266 data->length = buffer[0] + 1;
2267 data->medium_type = buffer[1];
2268 data->device_specific = buffer[2];
2269 data->block_descriptor_length = buffer[3];
2271 data->header_length = header_length;
2275 EXPORT_SYMBOL(scsi_mode_sense);
2278 * scsi_test_unit_ready - test if unit is ready
2279 * @sdev: scsi device to change the state of.
2280 * @timeout: command timeout
2281 * @retries: number of retries before failing
2282 * @sshdr: outpout pointer for decoded sense information.
2284 * Returns zero if unsuccessful or an error if TUR failed. For
2285 * removable media, UNIT_ATTENTION sets ->changed flag.
2288 scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries,
2289 struct scsi_sense_hdr *sshdr)
2292 TEST_UNIT_READY, 0, 0, 0, 0, 0,
2294 const struct scsi_exec_args exec_args = {
2299 /* try to eat the UNIT_ATTENTION if there are enough retries */
2301 result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_IN, NULL, 0,
2302 timeout, 1, &exec_args);
2303 if (sdev->removable && result > 0 && scsi_sense_valid(sshdr) &&
2304 sshdr->sense_key == UNIT_ATTENTION)
2306 } while (result > 0 && scsi_sense_valid(sshdr) &&
2307 sshdr->sense_key == UNIT_ATTENTION && --retries);
2311 EXPORT_SYMBOL(scsi_test_unit_ready);
2314 * scsi_device_set_state - Take the given device through the device state model.
2315 * @sdev: scsi device to change the state of.
2316 * @state: state to change to.
2318 * Returns zero if successful or an error if the requested
2319 * transition is illegal.
2322 scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
2324 enum scsi_device_state oldstate = sdev->sdev_state;
2326 if (state == oldstate)
2332 case SDEV_CREATED_BLOCK:
2343 case SDEV_TRANSPORT_OFFLINE:
2356 case SDEV_TRANSPORT_OFFLINE:
2364 case SDEV_TRANSPORT_OFFLINE:
2379 case SDEV_CREATED_BLOCK:
2388 case SDEV_CREATED_BLOCK:
2403 case SDEV_TRANSPORT_OFFLINE:
2415 case SDEV_TRANSPORT_OFFLINE:
2418 case SDEV_CREATED_BLOCK:
2426 sdev->offline_already = false;
2427 sdev->sdev_state = state;
2431 SCSI_LOG_ERROR_RECOVERY(1,
2432 sdev_printk(KERN_ERR, sdev,
2433 "Illegal state transition %s->%s",
2434 scsi_device_state_name(oldstate),
2435 scsi_device_state_name(state))
2439 EXPORT_SYMBOL(scsi_device_set_state);
2442 * scsi_evt_emit - emit a single SCSI device uevent
2443 * @sdev: associated SCSI device
2444 * @evt: event to emit
2446 * Send a single uevent (scsi_event) to the associated scsi_device.
2448 static void scsi_evt_emit(struct scsi_device *sdev, struct scsi_event *evt)
2453 switch (evt->evt_type) {
2454 case SDEV_EVT_MEDIA_CHANGE:
2455 envp[idx++] = "SDEV_MEDIA_CHANGE=1";
2457 case SDEV_EVT_INQUIRY_CHANGE_REPORTED:
2458 scsi_rescan_device(sdev);
2459 envp[idx++] = "SDEV_UA=INQUIRY_DATA_HAS_CHANGED";
2461 case SDEV_EVT_CAPACITY_CHANGE_REPORTED:
2462 envp[idx++] = "SDEV_UA=CAPACITY_DATA_HAS_CHANGED";
2464 case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED:
2465 envp[idx++] = "SDEV_UA=THIN_PROVISIONING_SOFT_THRESHOLD_REACHED";
2467 case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED:
2468 envp[idx++] = "SDEV_UA=MODE_PARAMETERS_CHANGED";
2470 case SDEV_EVT_LUN_CHANGE_REPORTED:
2471 envp[idx++] = "SDEV_UA=REPORTED_LUNS_DATA_HAS_CHANGED";
2473 case SDEV_EVT_ALUA_STATE_CHANGE_REPORTED:
2474 envp[idx++] = "SDEV_UA=ASYMMETRIC_ACCESS_STATE_CHANGED";
2476 case SDEV_EVT_POWER_ON_RESET_OCCURRED:
2477 envp[idx++] = "SDEV_UA=POWER_ON_RESET_OCCURRED";
2486 kobject_uevent_env(&sdev->sdev_gendev.kobj, KOBJ_CHANGE, envp);
2490 * scsi_evt_thread - send a uevent for each scsi event
2491 * @work: work struct for scsi_device
2493 * Dispatch queued events to their associated scsi_device kobjects
2496 void scsi_evt_thread(struct work_struct *work)
2498 struct scsi_device *sdev;
2499 enum scsi_device_event evt_type;
2500 LIST_HEAD(event_list);
2502 sdev = container_of(work, struct scsi_device, event_work);
2504 for (evt_type = SDEV_EVT_FIRST; evt_type <= SDEV_EVT_LAST; evt_type++)
2505 if (test_and_clear_bit(evt_type, sdev->pending_events))
2506 sdev_evt_send_simple(sdev, evt_type, GFP_KERNEL);
2509 struct scsi_event *evt;
2510 struct list_head *this, *tmp;
2511 unsigned long flags;
2513 spin_lock_irqsave(&sdev->list_lock, flags);
2514 list_splice_init(&sdev->event_list, &event_list);
2515 spin_unlock_irqrestore(&sdev->list_lock, flags);
2517 if (list_empty(&event_list))
2520 list_for_each_safe(this, tmp, &event_list) {
2521 evt = list_entry(this, struct scsi_event, node);
2522 list_del(&evt->node);
2523 scsi_evt_emit(sdev, evt);
2530 * sdev_evt_send - send asserted event to uevent thread
2531 * @sdev: scsi_device event occurred on
2532 * @evt: event to send
2534 * Assert scsi device event asynchronously.
2536 void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt)
2538 unsigned long flags;
2541 /* FIXME: currently this check eliminates all media change events
2542 * for polled devices. Need to update to discriminate between AN
2543 * and polled events */
2544 if (!test_bit(evt->evt_type, sdev->supported_events)) {
2550 spin_lock_irqsave(&sdev->list_lock, flags);
2551 list_add_tail(&evt->node, &sdev->event_list);
2552 schedule_work(&sdev->event_work);
2553 spin_unlock_irqrestore(&sdev->list_lock, flags);
2555 EXPORT_SYMBOL_GPL(sdev_evt_send);
2558 * sdev_evt_alloc - allocate a new scsi event
2559 * @evt_type: type of event to allocate
2560 * @gfpflags: GFP flags for allocation
2562 * Allocates and returns a new scsi_event.
2564 struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
2567 struct scsi_event *evt = kzalloc(sizeof(struct scsi_event), gfpflags);
2571 evt->evt_type = evt_type;
2572 INIT_LIST_HEAD(&evt->node);
2574 /* evt_type-specific initialization, if any */
2576 case SDEV_EVT_MEDIA_CHANGE:
2577 case SDEV_EVT_INQUIRY_CHANGE_REPORTED:
2578 case SDEV_EVT_CAPACITY_CHANGE_REPORTED:
2579 case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED:
2580 case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED:
2581 case SDEV_EVT_LUN_CHANGE_REPORTED:
2582 case SDEV_EVT_ALUA_STATE_CHANGE_REPORTED:
2583 case SDEV_EVT_POWER_ON_RESET_OCCURRED:
2591 EXPORT_SYMBOL_GPL(sdev_evt_alloc);
2594 * sdev_evt_send_simple - send asserted event to uevent thread
2595 * @sdev: scsi_device event occurred on
2596 * @evt_type: type of event to send
2597 * @gfpflags: GFP flags for allocation
2599 * Assert scsi device event asynchronously, given an event type.
2601 void sdev_evt_send_simple(struct scsi_device *sdev,
2602 enum scsi_device_event evt_type, gfp_t gfpflags)
2604 struct scsi_event *evt = sdev_evt_alloc(evt_type, gfpflags);
2606 sdev_printk(KERN_ERR, sdev, "event %d eaten due to OOM\n",
2611 sdev_evt_send(sdev, evt);
2613 EXPORT_SYMBOL_GPL(sdev_evt_send_simple);
2616 * scsi_device_quiesce - Block all commands except power management.
2617 * @sdev: scsi device to quiesce.
2619 * This works by trying to transition to the SDEV_QUIESCE state
2620 * (which must be a legal transition). When the device is in this
2621 * state, only power management requests will be accepted, all others will
2624 * Must be called with user context, may sleep.
2626 * Returns zero if unsuccessful or an error if not.
2629 scsi_device_quiesce(struct scsi_device *sdev)
2631 struct request_queue *q = sdev->request_queue;
2635 * It is allowed to call scsi_device_quiesce() multiple times from
2636 * the same context but concurrent scsi_device_quiesce() calls are
2639 WARN_ON_ONCE(sdev->quiesced_by && sdev->quiesced_by != current);
2641 if (sdev->quiesced_by == current)
2646 blk_mq_freeze_queue(q);
2648 * Ensure that the effect of blk_set_pm_only() will be visible
2649 * for percpu_ref_tryget() callers that occur after the queue
2650 * unfreeze even if the queue was already frozen before this function
2651 * was called. See also https://lwn.net/Articles/573497/.
2654 blk_mq_unfreeze_queue(q);
2656 mutex_lock(&sdev->state_mutex);
2657 err = scsi_device_set_state(sdev, SDEV_QUIESCE);
2659 sdev->quiesced_by = current;
2661 blk_clear_pm_only(q);
2662 mutex_unlock(&sdev->state_mutex);
2666 EXPORT_SYMBOL(scsi_device_quiesce);
2669 * scsi_device_resume - Restart user issued commands to a quiesced device.
2670 * @sdev: scsi device to resume.
2672 * Moves the device from quiesced back to running and restarts the
2675 * Must be called with user context, may sleep.
2677 void scsi_device_resume(struct scsi_device *sdev)
2679 /* check if the device state was mutated prior to resume, and if
2680 * so assume the state is being managed elsewhere (for example
2681 * device deleted during suspend)
2683 mutex_lock(&sdev->state_mutex);
2684 if (sdev->sdev_state == SDEV_QUIESCE)
2685 scsi_device_set_state(sdev, SDEV_RUNNING);
2686 if (sdev->quiesced_by) {
2687 sdev->quiesced_by = NULL;
2688 blk_clear_pm_only(sdev->request_queue);
2690 mutex_unlock(&sdev->state_mutex);
2692 EXPORT_SYMBOL(scsi_device_resume);
2695 device_quiesce_fn(struct scsi_device *sdev, void *data)
2697 scsi_device_quiesce(sdev);
2701 scsi_target_quiesce(struct scsi_target *starget)
2703 starget_for_each_device(starget, NULL, device_quiesce_fn);
2705 EXPORT_SYMBOL(scsi_target_quiesce);
2708 device_resume_fn(struct scsi_device *sdev, void *data)
2710 scsi_device_resume(sdev);
2714 scsi_target_resume(struct scsi_target *starget)
2716 starget_for_each_device(starget, NULL, device_resume_fn);
2718 EXPORT_SYMBOL(scsi_target_resume);
2720 static int __scsi_internal_device_block_nowait(struct scsi_device *sdev)
2722 if (scsi_device_set_state(sdev, SDEV_BLOCK))
2723 return scsi_device_set_state(sdev, SDEV_CREATED_BLOCK);
2728 void scsi_start_queue(struct scsi_device *sdev)
2730 if (cmpxchg(&sdev->queue_stopped, 1, 0))
2731 blk_mq_unquiesce_queue(sdev->request_queue);
2734 static void scsi_stop_queue(struct scsi_device *sdev)
2737 * The atomic variable of ->queue_stopped covers that
2738 * blk_mq_quiesce_queue* is balanced with blk_mq_unquiesce_queue.
2740 * The caller needs to wait until quiesce is done.
2742 if (!cmpxchg(&sdev->queue_stopped, 0, 1))
2743 blk_mq_quiesce_queue_nowait(sdev->request_queue);
2747 * scsi_internal_device_block_nowait - try to transition to the SDEV_BLOCK state
2748 * @sdev: device to block
2750 * Pause SCSI command processing on the specified device. Does not sleep.
2752 * Returns zero if successful or a negative error code upon failure.
2755 * This routine transitions the device to the SDEV_BLOCK state (which must be
2756 * a legal transition). When the device is in this state, command processing
2757 * is paused until the device leaves the SDEV_BLOCK state. See also
2758 * scsi_internal_device_unblock_nowait().
2760 int scsi_internal_device_block_nowait(struct scsi_device *sdev)
2762 int ret = __scsi_internal_device_block_nowait(sdev);
2765 * The device has transitioned to SDEV_BLOCK. Stop the
2766 * block layer from calling the midlayer with this device's
2770 scsi_stop_queue(sdev);
2773 EXPORT_SYMBOL_GPL(scsi_internal_device_block_nowait);
2776 * scsi_device_block - try to transition to the SDEV_BLOCK state
2777 * @sdev: device to block
2778 * @data: dummy argument, ignored
2780 * Pause SCSI command processing on the specified device. Callers must wait
2781 * until all ongoing scsi_queue_rq() calls have finished after this function
2785 * This routine transitions the device to the SDEV_BLOCK state (which must be
2786 * a legal transition). When the device is in this state, command processing
2787 * is paused until the device leaves the SDEV_BLOCK state. See also
2788 * scsi_internal_device_unblock().
2790 static void scsi_device_block(struct scsi_device *sdev, void *data)
2793 enum scsi_device_state state;
2795 mutex_lock(&sdev->state_mutex);
2796 err = __scsi_internal_device_block_nowait(sdev);
2797 state = sdev->sdev_state;
2800 * scsi_stop_queue() must be called with the state_mutex
2801 * held. Otherwise a simultaneous scsi_start_queue() call
2802 * might unquiesce the queue before we quiesce it.
2804 scsi_stop_queue(sdev);
2806 mutex_unlock(&sdev->state_mutex);
2808 WARN_ONCE(err, "%s: failed to block %s in state %d\n",
2809 __func__, dev_name(&sdev->sdev_gendev), state);
2813 * scsi_internal_device_unblock_nowait - resume a device after a block request
2814 * @sdev: device to resume
2815 * @new_state: state to set the device to after unblocking
2817 * Restart the device queue for a previously suspended SCSI device. Does not
2820 * Returns zero if successful or a negative error code upon failure.
2823 * This routine transitions the device to the SDEV_RUNNING state or to one of
2824 * the offline states (which must be a legal transition) allowing the midlayer
2825 * to goose the queue for this device.
2827 int scsi_internal_device_unblock_nowait(struct scsi_device *sdev,
2828 enum scsi_device_state new_state)
2830 switch (new_state) {
2832 case SDEV_TRANSPORT_OFFLINE:
2839 * Try to transition the scsi device to SDEV_RUNNING or one of the
2840 * offlined states and goose the device queue if successful.
2842 switch (sdev->sdev_state) {
2844 case SDEV_TRANSPORT_OFFLINE:
2845 sdev->sdev_state = new_state;
2847 case SDEV_CREATED_BLOCK:
2848 if (new_state == SDEV_TRANSPORT_OFFLINE ||
2849 new_state == SDEV_OFFLINE)
2850 sdev->sdev_state = new_state;
2852 sdev->sdev_state = SDEV_CREATED;
2860 scsi_start_queue(sdev);
2864 EXPORT_SYMBOL_GPL(scsi_internal_device_unblock_nowait);
2867 * scsi_internal_device_unblock - resume a device after a block request
2868 * @sdev: device to resume
2869 * @new_state: state to set the device to after unblocking
2871 * Restart the device queue for a previously suspended SCSI device. May sleep.
2873 * Returns zero if successful or a negative error code upon failure.
2876 * This routine transitions the device to the SDEV_RUNNING state or to one of
2877 * the offline states (which must be a legal transition) allowing the midlayer
2878 * to goose the queue for this device.
2880 static int scsi_internal_device_unblock(struct scsi_device *sdev,
2881 enum scsi_device_state new_state)
2885 mutex_lock(&sdev->state_mutex);
2886 ret = scsi_internal_device_unblock_nowait(sdev, new_state);
2887 mutex_unlock(&sdev->state_mutex);
2893 target_block(struct device *dev, void *data)
2895 if (scsi_is_target_device(dev))
2896 starget_for_each_device(to_scsi_target(dev), NULL,
2902 * scsi_block_targets - transition all SCSI child devices to SDEV_BLOCK state
2903 * @dev: a parent device of one or more scsi_target devices
2904 * @shost: the Scsi_Host to which this device belongs
2906 * Iterate over all children of @dev, which should be scsi_target devices,
2907 * and switch all subordinate scsi devices to SDEV_BLOCK state. Wait for
2908 * ongoing scsi_queue_rq() calls to finish. May sleep.
2911 * @dev must not itself be a scsi_target device.
2914 scsi_block_targets(struct Scsi_Host *shost, struct device *dev)
2916 WARN_ON_ONCE(scsi_is_target_device(dev));
2917 device_for_each_child(dev, NULL, target_block);
2918 blk_mq_wait_quiesce_done(&shost->tag_set);
2920 EXPORT_SYMBOL_GPL(scsi_block_targets);
2923 device_unblock(struct scsi_device *sdev, void *data)
2925 scsi_internal_device_unblock(sdev, *(enum scsi_device_state *)data);
2929 target_unblock(struct device *dev, void *data)
2931 if (scsi_is_target_device(dev))
2932 starget_for_each_device(to_scsi_target(dev), data,
2938 scsi_target_unblock(struct device *dev, enum scsi_device_state new_state)
2940 if (scsi_is_target_device(dev))
2941 starget_for_each_device(to_scsi_target(dev), &new_state,
2944 device_for_each_child(dev, &new_state, target_unblock);
2946 EXPORT_SYMBOL_GPL(scsi_target_unblock);
2949 * scsi_host_block - Try to transition all logical units to the SDEV_BLOCK state
2950 * @shost: device to block
2952 * Pause SCSI command processing for all logical units associated with the SCSI
2953 * host and wait until pending scsi_queue_rq() calls have finished.
2955 * Returns zero if successful or a negative error code upon failure.
2958 scsi_host_block(struct Scsi_Host *shost)
2960 struct scsi_device *sdev;
2964 * Call scsi_internal_device_block_nowait so we can avoid
2965 * calling synchronize_rcu() for each LUN.
2967 shost_for_each_device(sdev, shost) {
2968 mutex_lock(&sdev->state_mutex);
2969 ret = scsi_internal_device_block_nowait(sdev);
2970 mutex_unlock(&sdev->state_mutex);
2972 scsi_device_put(sdev);
2977 /* Wait for ongoing scsi_queue_rq() calls to finish. */
2978 blk_mq_wait_quiesce_done(&shost->tag_set);
2982 EXPORT_SYMBOL_GPL(scsi_host_block);
2985 scsi_host_unblock(struct Scsi_Host *shost, int new_state)
2987 struct scsi_device *sdev;
2990 shost_for_each_device(sdev, shost) {
2991 ret = scsi_internal_device_unblock(sdev, new_state);
2993 scsi_device_put(sdev);
2999 EXPORT_SYMBOL_GPL(scsi_host_unblock);
3002 * scsi_kmap_atomic_sg - find and atomically map an sg-elemnt
3003 * @sgl: scatter-gather list
3004 * @sg_count: number of segments in sg
3005 * @offset: offset in bytes into sg, on return offset into the mapped area
3006 * @len: bytes to map, on return number of bytes mapped
3008 * Returns virtual address of the start of the mapped page
3010 void *scsi_kmap_atomic_sg(struct scatterlist *sgl, int sg_count,
3011 size_t *offset, size_t *len)
3014 size_t sg_len = 0, len_complete = 0;
3015 struct scatterlist *sg;
3018 WARN_ON(!irqs_disabled());
3020 for_each_sg(sgl, sg, sg_count, i) {
3021 len_complete = sg_len; /* Complete sg-entries */
3022 sg_len += sg->length;
3023 if (sg_len > *offset)
3027 if (unlikely(i == sg_count)) {
3028 printk(KERN_ERR "%s: Bytes in sg: %zu, requested offset %zu, "
3030 __func__, sg_len, *offset, sg_count);
3035 /* Offset starting from the beginning of first page in this sg-entry */
3036 *offset = *offset - len_complete + sg->offset;
3038 /* Assumption: contiguous pages can be accessed as "page + i" */
3039 page = nth_page(sg_page(sg), (*offset >> PAGE_SHIFT));
3040 *offset &= ~PAGE_MASK;
3042 /* Bytes in this sg-entry from *offset to the end of the page */
3043 sg_len = PAGE_SIZE - *offset;
3047 return kmap_atomic(page);
3049 EXPORT_SYMBOL(scsi_kmap_atomic_sg);
3052 * scsi_kunmap_atomic_sg - atomically unmap a virtual address, previously mapped with scsi_kmap_atomic_sg
3053 * @virt: virtual address to be unmapped
3055 void scsi_kunmap_atomic_sg(void *virt)
3057 kunmap_atomic(virt);
3059 EXPORT_SYMBOL(scsi_kunmap_atomic_sg);
3061 void sdev_disable_disk_events(struct scsi_device *sdev)
3063 atomic_inc(&sdev->disk_events_disable_depth);
3065 EXPORT_SYMBOL(sdev_disable_disk_events);
3067 void sdev_enable_disk_events(struct scsi_device *sdev)
3069 if (WARN_ON_ONCE(atomic_read(&sdev->disk_events_disable_depth) <= 0))
3071 atomic_dec(&sdev->disk_events_disable_depth);
3073 EXPORT_SYMBOL(sdev_enable_disk_events);
3075 static unsigned char designator_prio(const unsigned char *d)
3078 /* not associated with LUN */
3082 /* invalid length */
3086 * Order of preference for lun descriptor:
3087 * - SCSI name string
3088 * - NAA IEEE Registered Extended
3089 * - EUI-64 based 16-byte
3090 * - EUI-64 based 12-byte
3091 * - NAA IEEE Registered
3092 * - NAA IEEE Extended
3093 * - EUI-64 based 8-byte
3094 * - SCSI name string (truncated)
3096 * as longer descriptors reduce the likelyhood
3097 * of identification clashes.
3100 switch (d[1] & 0xf) {
3102 /* SCSI name string, variable-length UTF-8 */
3105 switch (d[4] >> 4) {
3107 /* NAA registered extended */
3110 /* NAA registered */
3116 /* NAA locally assigned */
3125 /* EUI64-based, 16 byte */
3128 /* EUI64-based, 12 byte */
3131 /* EUI64-based, 8 byte */
3148 * scsi_vpd_lun_id - return a unique device identification
3149 * @sdev: SCSI device
3150 * @id: buffer for the identification
3151 * @id_len: length of the buffer
3153 * Copies a unique device identification into @id based
3154 * on the information in the VPD page 0x83 of the device.
3155 * The string will be formatted as a SCSI name string.
3157 * Returns the length of the identification or error on failure.
3158 * If the identifier is longer than the supplied buffer the actual
3159 * identifier length is returned and the buffer is not zero-padded.
3161 int scsi_vpd_lun_id(struct scsi_device *sdev, char *id, size_t id_len)
3165 const unsigned char *d, *cur_id_str;
3166 const struct scsi_vpd *vpd_pg83;
3167 int id_size = -EINVAL;
3170 vpd_pg83 = rcu_dereference(sdev->vpd_pg83);
3176 /* The id string must be at least 20 bytes + terminating NULL byte */
3182 memset(id, 0, id_len);
3183 for (d = vpd_pg83->data + 4;
3184 d < vpd_pg83->data + vpd_pg83->len;
3186 u8 prio = designator_prio(d);
3188 if (prio == 0 || cur_id_prio > prio)
3191 switch (d[1] & 0xf) {
3194 if (cur_id_size > d[3])
3198 if (cur_id_size + 4 > id_len)
3199 cur_id_size = id_len - 4;
3201 id_size = snprintf(id, id_len, "t10.%*pE",
3202 cur_id_size, cur_id_str);
3209 switch (cur_id_size) {
3211 id_size = snprintf(id, id_len,
3216 id_size = snprintf(id, id_len,
3221 id_size = snprintf(id, id_len,
3234 switch (cur_id_size) {
3236 id_size = snprintf(id, id_len,
3241 id_size = snprintf(id, id_len,
3250 /* SCSI name string */
3251 if (cur_id_size > d[3])
3253 /* Prefer others for truncated descriptor */
3254 if (d[3] > id_len) {
3256 if (cur_id_prio > prio)
3260 cur_id_size = id_size = d[3];
3262 if (cur_id_size >= id_len)
3263 cur_id_size = id_len - 1;
3264 memcpy(id, cur_id_str, cur_id_size);
3274 EXPORT_SYMBOL(scsi_vpd_lun_id);
3277 * scsi_vpd_tpg_id - return a target port group identifier
3278 * @sdev: SCSI device
3280 * Returns the Target Port Group identifier from the information
3281 * froom VPD page 0x83 of the device.
3283 * Returns the identifier or error on failure.
3285 int scsi_vpd_tpg_id(struct scsi_device *sdev, int *rel_id)
3287 const unsigned char *d;
3288 const struct scsi_vpd *vpd_pg83;
3289 int group_id = -EAGAIN, rel_port = -1;
3292 vpd_pg83 = rcu_dereference(sdev->vpd_pg83);
3298 d = vpd_pg83->data + 4;
3299 while (d < vpd_pg83->data + vpd_pg83->len) {
3300 switch (d[1] & 0xf) {
3302 /* Relative target port */
3303 rel_port = get_unaligned_be16(&d[6]);
3306 /* Target port group */
3307 group_id = get_unaligned_be16(&d[6]);
3316 if (group_id >= 0 && rel_id && rel_port != -1)
3321 EXPORT_SYMBOL(scsi_vpd_tpg_id);
3324 * scsi_build_sense - build sense data for a command
3325 * @scmd: scsi command for which the sense should be formatted
3326 * @desc: Sense format (non-zero == descriptor format,
3327 * 0 == fixed format)
3329 * @asc: Additional sense code
3330 * @ascq: Additional sense code qualifier
3333 void scsi_build_sense(struct scsi_cmnd *scmd, int desc, u8 key, u8 asc, u8 ascq)
3335 scsi_build_sense_buffer(desc, scmd->sense_buffer, key, asc, ascq);
3336 scmd->result = SAM_STAT_CHECK_CONDITION;
3338 EXPORT_SYMBOL_GPL(scsi_build_sense);