drivers/scsi/mpt3sas/mpt3sas_base.c

   1 /*
   2  * This is the Fusion MPT base driver providing common API layer interface
   3  * for access to MPT (Message Passing Technology) firmware.
   4  *
   5  * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
   6  * Copyright (C) 2012-2014  LSI Corporation
   7  * Copyright (C) 2013-2014 Avago Technologies
   8  *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License
  12  * as published by the Free Software Foundation; either version 2
  13  * of the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * NO WARRANTY
  21  * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  22  * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  23  * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  24  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  25  * solely responsible for determining the appropriateness of using and
  26  * distributing the Program and assumes all risks associated with its
  27  * exercise of rights under this Agreement, including but not limited to
  28  * the risks and costs of program errors, damage to or loss of data,
  29  * programs or equipment, and unavailability or interruption of operations.
  30
  31  * DISCLAIMER OF LIABILITY
  32  * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  33  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  34  * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  35  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  36  * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  37  * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  38  * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  39
  40  * You should have received a copy of the GNU General Public License
  41  * along with this program; if not, write to the Free Software
  42  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
  43  * USA.
  44  */
  45
  46 #include <linux/kernel.h>
  47 #include <linux/module.h>
  48 #include <linux/errno.h>
  49 #include <linux/init.h>
  50 #include <linux/slab.h>
  51 #include <linux/types.h>
  52 #include <linux/pci.h>
  53 #include <linux/kdev_t.h>
  54 #include <linux/blkdev.h>
  55 #include <linux/delay.h>
  56 #include <linux/interrupt.h>
  57 #include <linux/dma-mapping.h>
  58 #include <linux/io.h>
  59 #include <linux/time.h>
  60 #include <linux/kthread.h>
  61 #include <linux/aer.h>
  62
  63
  64 #include "mpt3sas_base.h"
  65
  66 static MPT_CALLBACK     mpt_callbacks[MPT_MAX_CALLBACKS];
  67
  68
  69 #define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
  70
  71  /* maximum controller queue depth */
  72 #define MAX_HBA_QUEUE_DEPTH     30000
  73 #define MAX_CHAIN_DEPTH         100000
  74 static int max_queue_depth = -1;
  75 module_param(max_queue_depth, int, 0);
  76 MODULE_PARM_DESC(max_queue_depth, " max controller queue depth ");
  77
  78 static int max_sgl_entries = -1;
  79 module_param(max_sgl_entries, int, 0);
  80 MODULE_PARM_DESC(max_sgl_entries, " max sg entries ");
  81
  82 static int msix_disable = -1;
  83 module_param(msix_disable, int, 0);
  84 MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
  85
  86 static int max_msix_vectors = -1;
  87 module_param(max_msix_vectors, int, 0);
  88 MODULE_PARM_DESC(max_msix_vectors,
  89         " max msix vectors");
  90
  91 static int mpt3sas_fwfault_debug;
  92 MODULE_PARM_DESC(mpt3sas_fwfault_debug,
  93         " enable detection of firmware fault and halt firmware - (default=0)");
  94
  95 static int
  96 _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
  97
  98 /**
  99  * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
 100  *
 101  */
 102 static int
 103 _scsih_set_fwfault_debug(const char *val, struct kernel_param *kp)
 104 {
 105         int ret = param_set_int(val, kp);
 106         struct MPT3SAS_ADAPTER *ioc;
 107
 108         if (ret)
 109                 return ret;
 110
 111         pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug);
 112         list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
 113                 ioc->fwfault_debug = mpt3sas_fwfault_debug;
 114         return 0;
 115 }
 116 module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
 117         param_get_int, &mpt3sas_fwfault_debug, 0644);
 118
 119 /**
 120  *  mpt3sas_remove_dead_ioc_func - kthread context to remove dead ioc
 121  * @arg: input argument, used to derive ioc
 122  *
 123  * Return 0 if controller is removed from pci subsystem.
 124  * Return -1 for other case.
 125  */
 126 static int mpt3sas_remove_dead_ioc_func(void *arg)
 127 {
 128         struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)arg;
 129         struct pci_dev *pdev;
 130
 131         if ((ioc == NULL))
 132                 return -1;
 133
 134         pdev = ioc->pdev;
 135         if ((pdev == NULL))
 136                 return -1;
 137         pci_stop_and_remove_bus_device_locked(pdev);
 138         return 0;
 139 }
 140
 141 /**
 142  * _base_fault_reset_work - workq handling ioc fault conditions
 143  * @work: input argument, used to derive ioc
 144  * Context: sleep.
 145  *
 146  * Return nothing.
 147  */
 148 static void
 149 _base_fault_reset_work(struct work_struct *work)
 150 {
 151         struct MPT3SAS_ADAPTER *ioc =
 152             container_of(work, struct MPT3SAS_ADAPTER, fault_reset_work.work);
 153         unsigned long    flags;
 154         u32 doorbell;
 155         int rc;
 156         struct task_struct *p;
 157
 158
 159         spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 160         if (ioc->shost_recovery)
 161                 goto rearm_timer;
 162         spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 163
 164         doorbell = mpt3sas_base_get_iocstate(ioc, 0);
 165         if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) {
 166                 pr_err(MPT3SAS_FMT "SAS host is non-operational !!!!\n",
 167                     ioc->name);
 168
 169                 /*
 170                  * Call _scsih_flush_pending_cmds callback so that we flush all
 171                  * pending commands back to OS. This call is required to aovid
 172                  * deadlock at block layer. Dead IOC will fail to do diag reset,
 173                  * and this call is safe since dead ioc will never return any
 174                  * command back from HW.
 175                  */
 176                 ioc->schedule_dead_ioc_flush_running_cmds(ioc);
 177                 /*
 178                  * Set remove_host flag early since kernel thread will
 179                  * take some time to execute.
 180                  */
 181                 ioc->remove_host = 1;
 182                 /*Remove the Dead Host */
 183                 p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc,
 184                     "mpt3sas_dead_ioc_%d", ioc->id);
 185                 if (IS_ERR(p))
 186                         pr_err(MPT3SAS_FMT
 187                         "%s: Running mpt3sas_dead_ioc thread failed !!!!\n",
 188                         ioc->name, __func__);
 189                 else
 190                         pr_err(MPT3SAS_FMT
 191                         "%s: Running mpt3sas_dead_ioc thread success !!!!\n",
 192                         ioc->name, __func__);
 193                 return; /* don't rearm timer */
 194         }
 195
 196         if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) {
 197                 rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 198                     FORCE_BIG_HAMMER);
 199                 pr_warn(MPT3SAS_FMT "%s: hard reset: %s\n", ioc->name,
 200                     __func__, (rc == 0) ? "success" : "failed");
 201                 doorbell = mpt3sas_base_get_iocstate(ioc, 0);
 202                 if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
 203                         mpt3sas_base_fault_info(ioc, doorbell &
 204                             MPI2_DOORBELL_DATA_MASK);
 205                 if (rc && (doorbell & MPI2_IOC_STATE_MASK) !=
 206                     MPI2_IOC_STATE_OPERATIONAL)
 207                         return; /* don't rearm timer */
 208         }
 209
 210         spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 211  rearm_timer:
 212         if (ioc->fault_reset_work_q)
 213                 queue_delayed_work(ioc->fault_reset_work_q,
 214                     &ioc->fault_reset_work,
 215                     msecs_to_jiffies(FAULT_POLLING_INTERVAL));
 216         spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 217 }
 218
 219 /**
 220  * mpt3sas_base_start_watchdog - start the fault_reset_work_q
 221  * @ioc: per adapter object
 222  * Context: sleep.
 223  *
 224  * Return nothing.
 225  */
 226 void
 227 mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc)
 228 {
 229         unsigned long    flags;
 230
 231         if (ioc->fault_reset_work_q)
 232                 return;
 233
 234         /* initialize fault polling */
 235
 236         INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
 237         snprintf(ioc->fault_reset_work_q_name,
 238             sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
 239         ioc->fault_reset_work_q =
 240                 create_singlethread_workqueue(ioc->fault_reset_work_q_name);
 241         if (!ioc->fault_reset_work_q) {
 242                 pr_err(MPT3SAS_FMT "%s: failed (line=%d)\n",
 243                     ioc->name, __func__, __LINE__);
 244                         return;
 245         }
 246         spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 247         if (ioc->fault_reset_work_q)
 248                 queue_delayed_work(ioc->fault_reset_work_q,
 249                     &ioc->fault_reset_work,
 250                     msecs_to_jiffies(FAULT_POLLING_INTERVAL));
 251         spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 252 }
 253
 254 /**
 255  * mpt3sas_base_stop_watchdog - stop the fault_reset_work_q
 256  * @ioc: per adapter object
 257  * Context: sleep.
 258  *
 259  * Return nothing.
 260  */
 261 void
 262 mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc)
 263 {
 264         unsigned long flags;
 265         struct workqueue_struct *wq;
 266
 267         spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 268         wq = ioc->fault_reset_work_q;
 269         ioc->fault_reset_work_q = NULL;
 270         spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 271         if (wq) {
 272                 if (!cancel_delayed_work_sync(&ioc->fault_reset_work))
 273                         flush_workqueue(wq);
 274                 destroy_workqueue(wq);
 275         }
 276 }
 277
 278 /**
 279  * mpt3sas_base_fault_info - verbose translation of firmware FAULT code
 280  * @ioc: per adapter object
 281  * @fault_code: fault code
 282  *
 283  * Return nothing.
 284  */
 285 void
 286 mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code)
 287 {
 288         pr_err(MPT3SAS_FMT "fault_state(0x%04x)!\n",
 289             ioc->name, fault_code);
 290 }
 291
 292 /**
 293  * mpt3sas_halt_firmware - halt's mpt controller firmware
 294  * @ioc: per adapter object
 295  *
 296  * For debugging timeout related issues.  Writing 0xCOFFEE00
 297  * to the doorbell register will halt controller firmware. With
 298  * the purpose to stop both driver and firmware, the enduser can
 299  * obtain a ring buffer from controller UART.
 300  */
 301 void
 302 mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc)
 303 {
 304         u32 doorbell;
 305
 306         if (!ioc->fwfault_debug)
 307                 return;
 308
 309         dump_stack();
 310
 311         doorbell = readl(&ioc->chip->Doorbell);
 312         if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
 313                 mpt3sas_base_fault_info(ioc , doorbell);
 314         else {
 315                 writel(0xC0FFEE00, &ioc->chip->Doorbell);
 316                 pr_err(MPT3SAS_FMT "Firmware is halted due to command timeout\n",
 317                         ioc->name);
 318         }
 319
 320         if (ioc->fwfault_debug == 2)
 321                 for (;;)
 322                         ;
 323         else
 324                 panic("panic in %s\n", __func__);
 325 }
 326
 327 #ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 328 /**
 329  * _base_sas_ioc_info - verbose translation of the ioc status
 330  * @ioc: per adapter object
 331  * @mpi_reply: reply mf payload returned from firmware
 332  * @request_hdr: request mf
 333  *
 334  * Return nothing.
 335  */
 336 static void
 337 _base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
 338         MPI2RequestHeader_t *request_hdr)
 339 {
 340         u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
 341             MPI2_IOCSTATUS_MASK;
 342         char *desc = NULL;
 343         u16 frame_sz;
 344         char *func_str = NULL;
 345
 346         /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
 347         if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
 348             request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
 349             request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION)
 350                 return;
 351
 352         if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 353                 return;
 354
 355         switch (ioc_status) {
 356
 357 /****************************************************************************
 358 *  Common IOCStatus values for all replies
 359 ****************************************************************************/
 360
 361         case MPI2_IOCSTATUS_INVALID_FUNCTION:
 362                 desc = "invalid function";
 363                 break;
 364         case MPI2_IOCSTATUS_BUSY:
 365                 desc = "busy";
 366                 break;
 367         case MPI2_IOCSTATUS_INVALID_SGL:
 368                 desc = "invalid sgl";
 369                 break;
 370         case MPI2_IOCSTATUS_INTERNAL_ERROR:
 371                 desc = "internal error";
 372                 break;
 373         case MPI2_IOCSTATUS_INVALID_VPID:
 374                 desc = "invalid vpid";
 375                 break;
 376         case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
 377                 desc = "insufficient resources";
 378                 break;
 379         case MPI2_IOCSTATUS_INVALID_FIELD:
 380                 desc = "invalid field";
 381                 break;
 382         case MPI2_IOCSTATUS_INVALID_STATE:
 383                 desc = "invalid state";
 384                 break;
 385         case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
 386                 desc = "op state not supported";
 387                 break;
 388
 389 /****************************************************************************
 390 *  Config IOCStatus values
 391 ****************************************************************************/
 392
 393         case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION:
 394                 desc = "config invalid action";
 395                 break;
 396         case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE:
 397                 desc = "config invalid type";
 398                 break;
 399         case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE:
 400                 desc = "config invalid page";
 401                 break;
 402         case MPI2_IOCSTATUS_CONFIG_INVALID_DATA:
 403                 desc = "config invalid data";
 404                 break;
 405         case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS:
 406                 desc = "config no defaults";
 407                 break;
 408         case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT:
 409                 desc = "config cant commit";
 410                 break;
 411
 412 /****************************************************************************
 413 *  SCSI IO Reply
 414 ****************************************************************************/
 415
 416         case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
 417         case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
 418         case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
 419         case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
 420         case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
 421         case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
 422         case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
 423         case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
 424         case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
 425         case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
 426         case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
 427         case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
 428                 break;
 429
 430 /****************************************************************************
 431 *  For use by SCSI Initiator and SCSI Target end-to-end data protection
 432 ****************************************************************************/
 433
 434         case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
 435                 desc = "eedp guard error";
 436                 break;
 437         case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
 438                 desc = "eedp ref tag error";
 439                 break;
 440         case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
 441                 desc = "eedp app tag error";
 442                 break;
 443
 444 /****************************************************************************
 445 *  SCSI Target values
 446 ****************************************************************************/
 447
 448         case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX:
 449                 desc = "target invalid io index";
 450                 break;
 451         case MPI2_IOCSTATUS_TARGET_ABORTED:
 452                 desc = "target aborted";
 453                 break;
 454         case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE:
 455                 desc = "target no conn retryable";
 456                 break;
 457         case MPI2_IOCSTATUS_TARGET_NO_CONNECTION:
 458                 desc = "target no connection";
 459                 break;
 460         case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH:
 461                 desc = "target xfer count mismatch";
 462                 break;
 463         case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR:
 464                 desc = "target data offset error";
 465                 break;
 466         case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA:
 467                 desc = "target too much write data";
 468                 break;
 469         case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT:
 470                 desc = "target iu too short";
 471                 break;
 472         case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT:
 473                 desc = "target ack nak timeout";
 474                 break;
 475         case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED:
 476                 desc = "target nak received";
 477                 break;
 478
 479 /****************************************************************************
 480 *  Serial Attached SCSI values
 481 ****************************************************************************/
 482
 483         case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED:
 484                 desc = "smp request failed";
 485                 break;
 486         case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN:
 487                 desc = "smp data overrun";
 488                 break;
 489
 490 /****************************************************************************
 491 *  Diagnostic Buffer Post / Diagnostic Release values
 492 ****************************************************************************/
 493
 494         case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED:
 495                 desc = "diagnostic released";
 496                 break;
 497         default:
 498                 break;
 499         }
 500
 501         if (!desc)
 502                 return;
 503
 504         switch (request_hdr->Function) {
 505         case MPI2_FUNCTION_CONFIG:
 506                 frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size;
 507                 func_str = "config_page";
 508                 break;
 509         case MPI2_FUNCTION_SCSI_TASK_MGMT:
 510                 frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t);
 511                 func_str = "task_mgmt";
 512                 break;
 513         case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
 514                 frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t);
 515                 func_str = "sas_iounit_ctl";
 516                 break;
 517         case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
 518                 frame_sz = sizeof(Mpi2SepRequest_t);
 519                 func_str = "enclosure";
 520                 break;
 521         case MPI2_FUNCTION_IOC_INIT:
 522                 frame_sz = sizeof(Mpi2IOCInitRequest_t);
 523                 func_str = "ioc_init";
 524                 break;
 525         case MPI2_FUNCTION_PORT_ENABLE:
 526                 frame_sz = sizeof(Mpi2PortEnableRequest_t);
 527                 func_str = "port_enable";
 528                 break;
 529         case MPI2_FUNCTION_SMP_PASSTHROUGH:
 530                 frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
 531                 func_str = "smp_passthru";
 532                 break;
 533         default:
 534                 frame_sz = 32;
 535                 func_str = "unknown";
 536                 break;
 537         }
 538
 539         pr_warn(MPT3SAS_FMT "ioc_status: %s(0x%04x), request(0x%p),(%s)\n",
 540                 ioc->name, desc, ioc_status, request_hdr, func_str);
 541
 542         _debug_dump_mf(request_hdr, frame_sz/4);
 543 }
 544
 545 /**
 546  * _base_display_event_data - verbose translation of firmware asyn events
 547  * @ioc: per adapter object
 548  * @mpi_reply: reply mf payload returned from firmware
 549  *
 550  * Return nothing.
 551  */
 552 static void
 553 _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
 554         Mpi2EventNotificationReply_t *mpi_reply)
 555 {
 556         char *desc = NULL;
 557         u16 event;
 558
 559         if (!(ioc->logging_level & MPT_DEBUG_EVENTS))
 560                 return;
 561
 562         event = le16_to_cpu(mpi_reply->Event);
 563
 564         switch (event) {
 565         case MPI2_EVENT_LOG_DATA:
 566                 desc = "Log Data";
 567                 break;
 568         case MPI2_EVENT_STATE_CHANGE:
 569                 desc = "Status Change";
 570                 break;
 571         case MPI2_EVENT_HARD_RESET_RECEIVED:
 572                 desc = "Hard Reset Received";
 573                 break;
 574         case MPI2_EVENT_EVENT_CHANGE:
 575                 desc = "Event Change";
 576                 break;
 577         case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
 578                 desc = "Device Status Change";
 579                 break;
 580         case MPI2_EVENT_IR_OPERATION_STATUS:
 581                 desc = "IR Operation Status";
 582                 break;
 583         case MPI2_EVENT_SAS_DISCOVERY:
 584         {
 585                 Mpi2EventDataSasDiscovery_t *event_data =
 586                     (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData;
 587                 pr_info(MPT3SAS_FMT "Discovery: (%s)", ioc->name,
 588                     (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
 589                     "start" : "stop");
 590                 if (event_data->DiscoveryStatus)
 591                         pr_info("discovery_status(0x%08x)",
 592                             le32_to_cpu(event_data->DiscoveryStatus));
 593                         pr_info("\n");
 594                 return;
 595         }
 596         case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
 597                 desc = "SAS Broadcast Primitive";
 598                 break;
 599         case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
 600                 desc = "SAS Init Device Status Change";
 601                 break;
 602         case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW:
 603                 desc = "SAS Init Table Overflow";
 604                 break;
 605         case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
 606                 desc = "SAS Topology Change List";
 607                 break;
 608         case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
 609                 desc = "SAS Enclosure Device Status Change";
 610                 break;
 611         case MPI2_EVENT_IR_VOLUME:
 612                 desc = "IR Volume";
 613                 break;
 614         case MPI2_EVENT_IR_PHYSICAL_DISK:
 615                 desc = "IR Physical Disk";
 616                 break;
 617         case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
 618                 desc = "IR Configuration Change List";
 619                 break;
 620         case MPI2_EVENT_LOG_ENTRY_ADDED:
 621                 desc = "Log Entry Added";
 622                 break;
 623         case MPI2_EVENT_TEMP_THRESHOLD:
 624                 desc = "Temperature Threshold";
 625                 break;
 626         }
 627
 628         if (!desc)
 629                 return;
 630
 631         pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc);
 632 }
 633 #endif
 634
 635 /**
 636  * _base_sas_log_info - verbose translation of firmware log info
 637  * @ioc: per adapter object
 638  * @log_info: log info
 639  *
 640  * Return nothing.
 641  */
 642 static void
 643 _base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info)
 644 {
 645         union loginfo_type {
 646                 u32     loginfo;
 647                 struct {
 648                         u32     subcode:16;
 649                         u32     code:8;
 650                         u32     originator:4;
 651                         u32     bus_type:4;
 652                 } dw;
 653         };
 654         union loginfo_type sas_loginfo;
 655         char *originator_str = NULL;
 656
 657         sas_loginfo.loginfo = log_info;
 658         if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
 659                 return;
 660
 661         /* each nexus loss loginfo */
 662         if (log_info == 0x31170000)
 663                 return;
 664
 665         /* eat the loginfos associated with task aborts */
 666         if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info ==
 667             0x31140000 || log_info == 0x31130000))
 668                 return;
 669
 670         switch (sas_loginfo.dw.originator) {
 671         case 0:
 672                 originator_str = "IOP";
 673                 break;
 674         case 1:
 675                 originator_str = "PL";
 676                 break;
 677         case 2:
 678                 originator_str = "IR";
 679                 break;
 680         }
 681
 682         pr_warn(MPT3SAS_FMT
 683                 "log_info(0x%08x): originator(%s), code(0x%02x), sub_code(0x%04x)\n",
 684                 ioc->name, log_info,
 685              originator_str, sas_loginfo.dw.code,
 686              sas_loginfo.dw.subcode);
 687 }
 688
 689 /**
 690  * _base_display_reply_info -
 691  * @ioc: per adapter object
 692  * @smid: system request message index
 693  * @msix_index: MSIX table index supplied by the OS
 694  * @reply: reply message frame(lower 32bit addr)
 695  *
 696  * Return nothing.
 697  */
 698 static void
 699 _base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 700         u32 reply)
 701 {
 702         MPI2DefaultReply_t *mpi_reply;
 703         u16 ioc_status;
 704         u32 loginfo = 0;
 705
 706         mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
 707         if (unlikely(!mpi_reply)) {
 708                 pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
 709                     ioc->name, __FILE__, __LINE__, __func__);
 710                 return;
 711         }
 712         ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
 713 #ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 714         if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
 715             (ioc->logging_level & MPT_DEBUG_REPLY)) {
 716                 _base_sas_ioc_info(ioc , mpi_reply,
 717                    mpt3sas_base_get_msg_frame(ioc, smid));
 718         }
 719 #endif
 720         if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
 721                 loginfo = le32_to_cpu(mpi_reply->IOCLogInfo);
 722                 _base_sas_log_info(ioc, loginfo);
 723         }
 724
 725         if (ioc_status || loginfo) {
 726                 ioc_status &= MPI2_IOCSTATUS_MASK;
 727                 mpt3sas_trigger_mpi(ioc, ioc_status, loginfo);
 728         }
 729 }
 730
 731 /**
 732  * mpt3sas_base_done - base internal command completion routine
 733  * @ioc: per adapter object
 734  * @smid: system request message index
 735  * @msix_index: MSIX table index supplied by the OS
 736  * @reply: reply message frame(lower 32bit addr)
 737  *
 738  * Return 1 meaning mf should be freed from _base_interrupt
 739  *        0 means the mf is freed from this function.
 740  */
 741 u8
 742 mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 743         u32 reply)
 744 {
 745         MPI2DefaultReply_t *mpi_reply;
 746
 747         mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
 748         if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
 749                 return 1;
 750
 751         if (ioc->base_cmds.status == MPT3_CMD_NOT_USED)
 752                 return 1;
 753
 754         ioc->base_cmds.status |= MPT3_CMD_COMPLETE;
 755         if (mpi_reply) {
 756                 ioc->base_cmds.status |= MPT3_CMD_REPLY_VALID;
 757                 memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
 758         }
 759         ioc->base_cmds.status &= ~MPT3_CMD_PENDING;
 760
 761         complete(&ioc->base_cmds.done);
 762         return 1;
 763 }
 764
 765 /**
 766  * _base_async_event - main callback handler for firmware asyn events
 767  * @ioc: per adapter object
 768  * @msix_index: MSIX table index supplied by the OS
 769  * @reply: reply message frame(lower 32bit addr)
 770  *
 771  * Return 1 meaning mf should be freed from _base_interrupt
 772  *        0 means the mf is freed from this function.
 773  */
 774 static u8
 775 _base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
 776 {
 777         Mpi2EventNotificationReply_t *mpi_reply;
 778         Mpi2EventAckRequest_t *ack_request;
 779         u16 smid;
 780
 781         mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
 782         if (!mpi_reply)
 783                 return 1;
 784         if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
 785                 return 1;
 786 #ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 787         _base_display_event_data(ioc, mpi_reply);
 788 #endif
 789         if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
 790                 goto out;
 791         smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
 792         if (!smid) {
 793                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
 794                     ioc->name, __func__);
 795                 goto out;
 796         }
 797
 798         ack_request = mpt3sas_base_get_msg_frame(ioc, smid);
 799         memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
 800         ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
 801         ack_request->Event = mpi_reply->Event;
 802         ack_request->EventContext = mpi_reply->EventContext;
 803         ack_request->VF_ID = 0;  /* TODO */
 804         ack_request->VP_ID = 0;
 805         mpt3sas_base_put_smid_default(ioc, smid);
 806
 807  out:
 808
 809         /* scsih callback handler */
 810         mpt3sas_scsih_event_callback(ioc, msix_index, reply);
 811
 812         /* ctl callback handler */
 813         mpt3sas_ctl_event_callback(ioc, msix_index, reply);
 814
 815         return 1;
 816 }
 817
 818 /**
 819  * _base_get_cb_idx - obtain the callback index
 820  * @ioc: per adapter object
 821  * @smid: system request message index
 822  *
 823  * Return callback index.
 824  */
 825 static u8
 826 _base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid)
 827 {
 828         int i;
 829         u8 cb_idx;
 830
 831         if (smid < ioc->hi_priority_smid) {
 832                 i = smid - 1;
 833                 cb_idx = ioc->scsi_lookup[i].cb_idx;
 834         } else if (smid < ioc->internal_smid) {
 835                 i = smid - ioc->hi_priority_smid;
 836                 cb_idx = ioc->hpr_lookup[i].cb_idx;
 837         } else if (smid <= ioc->hba_queue_depth) {
 838                 i = smid - ioc->internal_smid;
 839                 cb_idx = ioc->internal_lookup[i].cb_idx;
 840         } else
 841                 cb_idx = 0xFF;
 842         return cb_idx;
 843 }
 844
 845 /**
 846  * _base_mask_interrupts - disable interrupts
 847  * @ioc: per adapter object
 848  *
 849  * Disabling ResetIRQ, Reply and Doorbell Interrupts
 850  *
 851  * Return nothing.
 852  */
 853 static void
 854 _base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc)
 855 {
 856         u32 him_register;
 857
 858         ioc->mask_interrupts = 1;
 859         him_register = readl(&ioc->chip->HostInterruptMask);
 860         him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK;
 861         writel(him_register, &ioc->chip->HostInterruptMask);
 862         readl(&ioc->chip->HostInterruptMask);
 863 }
 864
 865 /**
 866  * _base_unmask_interrupts - enable interrupts
 867  * @ioc: per adapter object
 868  *
 869  * Enabling only Reply Interrupts
 870  *
 871  * Return nothing.
 872  */
 873 static void
 874 _base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc)
 875 {
 876         u32 him_register;
 877
 878         him_register = readl(&ioc->chip->HostInterruptMask);
 879         him_register &= ~MPI2_HIM_RIM;
 880         writel(him_register, &ioc->chip->HostInterruptMask);
 881         ioc->mask_interrupts = 0;
 882 }
 883
 884 union reply_descriptor {
 885         u64 word;
 886         struct {
 887                 u32 low;
 888                 u32 high;
 889         } u;
 890 };
 891
 892 /**
 893  * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
 894  * @irq: irq number (not used)
 895  * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
 896  * @r: pt_regs pointer (not used)
 897  *
 898  * Return IRQ_HANDLE if processed, else IRQ_NONE.
 899  */
 900 static irqreturn_t
 901 _base_interrupt(int irq, void *bus_id)
 902 {
 903         struct adapter_reply_queue *reply_q = bus_id;
 904         union reply_descriptor rd;
 905         u32 completed_cmds;
 906         u8 request_desript_type;
 907         u16 smid;
 908         u8 cb_idx;
 909         u32 reply;
 910         u8 msix_index = reply_q->msix_index;
 911         struct MPT3SAS_ADAPTER *ioc = reply_q->ioc;
 912         Mpi2ReplyDescriptorsUnion_t *rpf;
 913         u8 rc;
 914
 915         if (ioc->mask_interrupts)
 916                 return IRQ_NONE;
 917
 918         if (!atomic_add_unless(&reply_q->busy, 1, 1))
 919                 return IRQ_NONE;
 920
 921         rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index];
 922         request_desript_type = rpf->Default.ReplyFlags
 923              & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
 924         if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) {
 925                 atomic_dec(&reply_q->busy);
 926                 return IRQ_NONE;
 927         }
 928
 929         completed_cmds = 0;
 930         cb_idx = 0xFF;
 931         do {
 932                 rd.word = le64_to_cpu(rpf->Words);
 933                 if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
 934                         goto out;
 935                 reply = 0;
 936                 smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
 937                 if (request_desript_type ==
 938                     MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS ||
 939                     request_desript_type ==
 940                     MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS) {
 941                         cb_idx = _base_get_cb_idx(ioc, smid);
 942                         if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
 943                             (likely(mpt_callbacks[cb_idx] != NULL))) {
 944                                 rc = mpt_callbacks[cb_idx](ioc, smid,
 945                                     msix_index, 0);
 946                                 if (rc)
 947                                         mpt3sas_base_free_smid(ioc, smid);
 948                         }
 949                 } else if (request_desript_type ==
 950                     MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
 951                         reply = le32_to_cpu(
 952                             rpf->AddressReply.ReplyFrameAddress);
 953                         if (reply > ioc->reply_dma_max_address ||
 954                             reply < ioc->reply_dma_min_address)
 955                                 reply = 0;
 956                         if (smid) {
 957                                 cb_idx = _base_get_cb_idx(ioc, smid);
 958                                 if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
 959                                     (likely(mpt_callbacks[cb_idx] != NULL))) {
 960                                         rc = mpt_callbacks[cb_idx](ioc, smid,
 961                                             msix_index, reply);
 962                                         if (reply)
 963                                                 _base_display_reply_info(ioc,
 964                                                     smid, msix_index, reply);
 965                                         if (rc)
 966                                                 mpt3sas_base_free_smid(ioc,
 967                                                     smid);
 968                                 }
 969                         } else {
 970                                 _base_async_event(ioc, msix_index, reply);
 971                         }
 972
 973                         /* reply free queue handling */
 974                         if (reply) {
 975                                 ioc->reply_free_host_index =
 976                                     (ioc->reply_free_host_index ==
 977                                     (ioc->reply_free_queue_depth - 1)) ?
 978                                     0 : ioc->reply_free_host_index + 1;
 979                                 ioc->reply_free[ioc->reply_free_host_index] =
 980                                     cpu_to_le32(reply);
 981                                 wmb();
 982                                 writel(ioc->reply_free_host_index,
 983                                     &ioc->chip->ReplyFreeHostIndex);
 984                         }
 985                 }
 986
 987                 rpf->Words = cpu_to_le64(ULLONG_MAX);
 988                 reply_q->reply_post_host_index =
 989                     (reply_q->reply_post_host_index ==
 990                     (ioc->reply_post_queue_depth - 1)) ? 0 :
 991                     reply_q->reply_post_host_index + 1;
 992                 request_desript_type =
 993                     reply_q->reply_post_free[reply_q->reply_post_host_index].
 994                     Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
 995                 completed_cmds++;
 996                 if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
 997                         goto out;
 998                 if (!reply_q->reply_post_host_index)
 999                         rpf = reply_q->reply_post_free;
1000                 else
1001                         rpf++;
1002         } while (1);
1003
1004  out:
1005
1006         if (!completed_cmds) {
1007                 atomic_dec(&reply_q->busy);
1008                 return IRQ_NONE;
1009         }
1010
1011         wmb();
1012
1013         /* Update Reply Post Host Index.
1014          * For those HBA's which support combined reply queue feature
1015          * 1. Get the correct Supplemental Reply Post Host Index Register.
1016          *    i.e. (msix_index / 8)th entry from Supplemental Reply Post Host
1017          *    Index Register address bank i.e replyPostRegisterIndex[],
1018          * 2. Then update this register with new reply host index value
1019          *    in ReplyPostIndex field and the MSIxIndex field with
1020          *    msix_index value reduced to a value between 0 and 7,
1021          *    using a modulo 8 operation. Since each Supplemental Reply Post
1022          *    Host Index Register supports 8 MSI-X vectors.
1023          *
1024          * For other HBA's just update the Reply Post Host Index register with
1025          * new reply host index value in ReplyPostIndex Field and msix_index
1026          * value in MSIxIndex field.
1027          */
1028         if (ioc->msix96_vector)
1029                 writel(reply_q->reply_post_host_index | ((msix_index  & 7) <<
1030                         MPI2_RPHI_MSIX_INDEX_SHIFT),
1031                         ioc->replyPostRegisterIndex[msix_index/8]);
1032         else
1033                 writel(reply_q->reply_post_host_index | (msix_index <<
1034                         MPI2_RPHI_MSIX_INDEX_SHIFT),
1035                         &ioc->chip->ReplyPostHostIndex);
1036         atomic_dec(&reply_q->busy);
1037         return IRQ_HANDLED;
1038 }
1039
1040 /**
1041  * _base_is_controller_msix_enabled - is controller support muli-reply queues
1042  * @ioc: per adapter object
1043  *
1044  */
1045 static inline int
1046 _base_is_controller_msix_enabled(struct MPT3SAS_ADAPTER *ioc)
1047 {
1048         return (ioc->facts.IOCCapabilities &
1049             MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable;
1050 }
1051
1052 /**
1053  * mpt3sas_base_flush_reply_queues - flushing the MSIX reply queues
1054  * @ioc: per adapter object
1055  * Context: ISR conext
1056  *
1057  * Called when a Task Management request has completed. We want
1058  * to flush the other reply queues so all the outstanding IO has been
1059  * completed back to OS before we process the TM completetion.
1060  *
1061  * Return nothing.
1062  */
1063 void
1064 mpt3sas_base_flush_reply_queues(struct MPT3SAS_ADAPTER *ioc)
1065 {
1066         struct adapter_reply_queue *reply_q;
1067
1068         /* If MSIX capability is turned off
1069          * then multi-queues are not enabled
1070          */
1071         if (!_base_is_controller_msix_enabled(ioc))
1072                 return;
1073
1074         list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
1075                 if (ioc->shost_recovery)
1076                         return;
1077                 /* TMs are on msix_index == 0 */
1078                 if (reply_q->msix_index == 0)
1079                         continue;
1080                 _base_interrupt(reply_q->vector, (void *)reply_q);
1081         }
1082 }
1083
1084 /**
1085  * mpt3sas_base_release_callback_handler - clear interrupt callback handler
1086  * @cb_idx: callback index
1087  *
1088  * Return nothing.
1089  */
1090 void
1091 mpt3sas_base_release_callback_handler(u8 cb_idx)
1092 {
1093         mpt_callbacks[cb_idx] = NULL;
1094 }
1095
1096 /**
1097  * mpt3sas_base_register_callback_handler - obtain index for the interrupt callback handler
1098  * @cb_func: callback function
1099  *
1100  * Returns cb_func.
1101  */
1102 u8
1103 mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func)
1104 {
1105         u8 cb_idx;
1106
1107         for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--)
1108                 if (mpt_callbacks[cb_idx] == NULL)
1109                         break;
1110
1111         mpt_callbacks[cb_idx] = cb_func;
1112         return cb_idx;
1113 }
1114
1115 /**
1116  * mpt3sas_base_initialize_callback_handler - initialize the interrupt callback handler
1117  *
1118  * Return nothing.
1119  */
1120 void
1121 mpt3sas_base_initialize_callback_handler(void)
1122 {
1123         u8 cb_idx;
1124
1125         for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++)
1126                 mpt3sas_base_release_callback_handler(cb_idx);
1127 }
1128
1129
1130 /**
1131  * _base_build_zero_len_sge - build zero length sg entry
1132  * @ioc: per adapter object
1133  * @paddr: virtual address for SGE
1134  *
1135  * Create a zero length scatter gather entry to insure the IOCs hardware has
1136  * something to use if the target device goes brain dead and tries
1137  * to send data even when none is asked for.
1138  *
1139  * Return nothing.
1140  */
1141 static void
1142 _base_build_zero_len_sge(struct MPT3SAS_ADAPTER *ioc, void *paddr)
1143 {
1144         u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT |
1145             MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST |
1146             MPI2_SGE_FLAGS_SIMPLE_ELEMENT) <<
1147             MPI2_SGE_FLAGS_SHIFT);
1148         ioc->base_add_sg_single(paddr, flags_length, -1);
1149 }
1150
1151 /**
1152  * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
1153  * @paddr: virtual address for SGE
1154  * @flags_length: SGE flags and data transfer length
1155  * @dma_addr: Physical address
1156  *
1157  * Return nothing.
1158  */
1159 static void
1160 _base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr)
1161 {
1162         Mpi2SGESimple32_t *sgel = paddr;
1163
1164         flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING |
1165             MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
1166         sgel->FlagsLength = cpu_to_le32(flags_length);
1167         sgel->Address = cpu_to_le32(dma_addr);
1168 }
1169
1170
1171 /**
1172  * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
1173  * @paddr: virtual address for SGE
1174  * @flags_length: SGE flags and data transfer length
1175  * @dma_addr: Physical address
1176  *
1177  * Return nothing.
1178  */
1179 static void
1180 _base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr)
1181 {
1182         Mpi2SGESimple64_t *sgel = paddr;
1183
1184         flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING |
1185             MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
1186         sgel->FlagsLength = cpu_to_le32(flags_length);
1187         sgel->Address = cpu_to_le64(dma_addr);
1188 }
1189
1190 /**
1191  * _base_get_chain_buffer_tracker - obtain chain tracker
1192  * @ioc: per adapter object
1193  * @smid: smid associated to an IO request
1194  *
1195  * Returns chain tracker(from ioc->free_chain_list)
1196  */
1197 static struct chain_tracker *
1198 _base_get_chain_buffer_tracker(struct MPT3SAS_ADAPTER *ioc, u16 smid)
1199 {
1200         struct chain_tracker *chain_req;
1201         unsigned long flags;
1202
1203         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1204         if (list_empty(&ioc->free_chain_list)) {
1205                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1206                 dfailprintk(ioc, pr_warn(MPT3SAS_FMT
1207                         "chain buffers not available\n", ioc->name));
1208                 return NULL;
1209         }
1210         chain_req = list_entry(ioc->free_chain_list.next,
1211             struct chain_tracker, tracker_list);
1212         list_del_init(&chain_req->tracker_list);
1213         list_add_tail(&chain_req->tracker_list,
1214             &ioc->scsi_lookup[smid - 1].chain_list);
1215         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1216         return chain_req;
1217 }
1218
1219
1220 /**
1221  * _base_build_sg - build generic sg
1222  * @ioc: per adapter object
1223  * @psge: virtual address for SGE
1224  * @data_out_dma: physical address for WRITES
1225  * @data_out_sz: data xfer size for WRITES
1226  * @data_in_dma: physical address for READS
1227  * @data_in_sz: data xfer size for READS
1228  *
1229  * Return nothing.
1230  */
1231 static void
1232 _base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge,
1233         dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
1234         size_t data_in_sz)
1235 {
1236         u32 sgl_flags;
1237
1238         if (!data_out_sz && !data_in_sz) {
1239                 _base_build_zero_len_sge(ioc, psge);
1240                 return;
1241         }
1242
1243         if (data_out_sz && data_in_sz) {
1244                 /* WRITE sgel first */
1245                 sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
1246                     MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
1247                 sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
1248                 ioc->base_add_sg_single(psge, sgl_flags |
1249                     data_out_sz, data_out_dma);
1250
1251                 /* incr sgel */
1252                 psge += ioc->sge_size;
1253
1254                 /* READ sgel last */
1255                 sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
1256                     MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
1257                     MPI2_SGE_FLAGS_END_OF_LIST);
1258                 sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
1259                 ioc->base_add_sg_single(psge, sgl_flags |
1260                     data_in_sz, data_in_dma);
1261         } else if (data_out_sz) /* WRITE */ {
1262                 sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
1263                     MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
1264                     MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC);
1265                 sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
1266                 ioc->base_add_sg_single(psge, sgl_flags |
1267                     data_out_sz, data_out_dma);
1268         } else if (data_in_sz) /* READ */ {
1269                 sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
1270                     MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
1271                     MPI2_SGE_FLAGS_END_OF_LIST);
1272                 sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
1273                 ioc->base_add_sg_single(psge, sgl_flags |
1274                     data_in_sz, data_in_dma);
1275         }
1276 }
1277
1278 /* IEEE format sgls */
1279
1280 /**
1281  * _base_add_sg_single_ieee - add sg element for IEEE format
1282  * @paddr: virtual address for SGE
1283  * @flags: SGE flags
1284  * @chain_offset: number of 128 byte elements from start of segment
1285  * @length: data transfer length
1286  * @dma_addr: Physical address
1287  *
1288  * Return nothing.
1289  */
1290 static void
1291 _base_add_sg_single_ieee(void *paddr, u8 flags, u8 chain_offset, u32 length,
1292         dma_addr_t dma_addr)
1293 {
1294         Mpi25IeeeSgeChain64_t *sgel = paddr;
1295
1296         sgel->Flags = flags;
1297         sgel->NextChainOffset = chain_offset;
1298         sgel->Length = cpu_to_le32(length);
1299         sgel->Address = cpu_to_le64(dma_addr);
1300 }
1301
1302 /**
1303  * _base_build_zero_len_sge_ieee - build zero length sg entry for IEEE format
1304  * @ioc: per adapter object
1305  * @paddr: virtual address for SGE
1306  *
1307  * Create a zero length scatter gather entry to insure the IOCs hardware has
1308  * something to use if the target device goes brain dead and tries
1309  * to send data even when none is asked for.
1310  *
1311  * Return nothing.
1312  */
1313 static void
1314 _base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr)
1315 {
1316         u8 sgl_flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
1317                 MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
1318                 MPI25_IEEE_SGE_FLAGS_END_OF_LIST);
1319         _base_add_sg_single_ieee(paddr, sgl_flags, 0, 0, -1);
1320 }
1321
1322 /**
1323  * _base_build_sg_scmd_ieee - main sg creation routine for IEEE format
1324  * @ioc: per adapter object
1325  * @scmd: scsi command
1326  * @smid: system request message index
1327  * Context: none.
1328  *
1329  * The main routine that builds scatter gather table from a given
1330  * scsi request sent via the .queuecommand main handler.
1331  *
1332  * Returns 0 success, anything else error
1333  */
1334 static int
1335 _base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
1336         struct scsi_cmnd *scmd, u16 smid)
1337 {
1338         Mpi2SCSIIORequest_t *mpi_request;
1339         dma_addr_t chain_dma;
1340         struct scatterlist *sg_scmd;
1341         void *sg_local, *chain;
1342         u32 chain_offset;
1343         u32 chain_length;
1344         int sges_left;
1345         u32 sges_in_segment;
1346         u8 simple_sgl_flags;
1347         u8 simple_sgl_flags_last;
1348         u8 chain_sgl_flags;
1349         struct chain_tracker *chain_req;
1350
1351         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
1352
1353         /* init scatter gather flags */
1354         simple_sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
1355             MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
1356         simple_sgl_flags_last = simple_sgl_flags |
1357             MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
1358         chain_sgl_flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
1359             MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
1360
1361         sg_scmd = scsi_sglist(scmd);
1362         sges_left = scsi_dma_map(scmd);
1363         if (!sges_left) {
1364                 sdev_printk(KERN_ERR, scmd->device,
1365                         "pci_map_sg failed: request for %d bytes!\n",
1366                         scsi_bufflen(scmd));
1367                 return -ENOMEM;
1368         }
1369
1370         sg_local = &mpi_request->SGL;
1371         sges_in_segment = (ioc->request_sz -
1372             offsetof(Mpi2SCSIIORequest_t, SGL))/ioc->sge_size_ieee;
1373         if (sges_left <= sges_in_segment)
1374                 goto fill_in_last_segment;
1375
1376         mpi_request->ChainOffset = (sges_in_segment - 1 /* chain element */) +
1377             (offsetof(Mpi2SCSIIORequest_t, SGL)/ioc->sge_size_ieee);
1378
1379         /* fill in main message segment when there is a chain following */
1380         while (sges_in_segment > 1) {
1381                 _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
1382                     sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
1383                 sg_scmd = sg_next(sg_scmd);
1384                 sg_local += ioc->sge_size_ieee;
1385                 sges_left--;
1386                 sges_in_segment--;
1387         }
1388
1389         /* initializing the pointers */
1390         chain_req = _base_get_chain_buffer_tracker(ioc, smid);
1391         if (!chain_req)
1392                 return -1;
1393         chain = chain_req->chain_buffer;
1394         chain_dma = chain_req->chain_buffer_dma;
1395         do {
1396                 sges_in_segment = (sges_left <=
1397                     ioc->max_sges_in_chain_message) ? sges_left :
1398                     ioc->max_sges_in_chain_message;
1399                 chain_offset = (sges_left == sges_in_segment) ?
1400                     0 : sges_in_segment;
1401                 chain_length = sges_in_segment * ioc->sge_size_ieee;
1402                 if (chain_offset)
1403                         chain_length += ioc->sge_size_ieee;
1404                 _base_add_sg_single_ieee(sg_local, chain_sgl_flags,
1405                     chain_offset, chain_length, chain_dma);
1406
1407                 sg_local = chain;
1408                 if (!chain_offset)
1409                         goto fill_in_last_segment;
1410
1411                 /* fill in chain segments */
1412                 while (sges_in_segment) {
1413                         _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
1414                             sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
1415                         sg_scmd = sg_next(sg_scmd);
1416                         sg_local += ioc->sge_size_ieee;
1417                         sges_left--;
1418                         sges_in_segment--;
1419                 }
1420
1421                 chain_req = _base_get_chain_buffer_tracker(ioc, smid);
1422                 if (!chain_req)
1423                         return -1;
1424                 chain = chain_req->chain_buffer;
1425                 chain_dma = chain_req->chain_buffer_dma;
1426         } while (1);
1427
1428
1429  fill_in_last_segment:
1430
1431         /* fill the last segment */
1432         while (sges_left) {
1433                 if (sges_left == 1)
1434                         _base_add_sg_single_ieee(sg_local,
1435                             simple_sgl_flags_last, 0, sg_dma_len(sg_scmd),
1436                             sg_dma_address(sg_scmd));
1437                 else
1438                         _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
1439                             sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
1440                 sg_scmd = sg_next(sg_scmd);
1441                 sg_local += ioc->sge_size_ieee;
1442                 sges_left--;
1443         }
1444
1445         return 0;
1446 }
1447
1448 /**
1449  * _base_build_sg_ieee - build generic sg for IEEE format
1450  * @ioc: per adapter object
1451  * @psge: virtual address for SGE
1452  * @data_out_dma: physical address for WRITES
1453  * @data_out_sz: data xfer size for WRITES
1454  * @data_in_dma: physical address for READS
1455  * @data_in_sz: data xfer size for READS
1456  *
1457  * Return nothing.
1458  */
1459 static void
1460 _base_build_sg_ieee(struct MPT3SAS_ADAPTER *ioc, void *psge,
1461         dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
1462         size_t data_in_sz)
1463 {
1464         u8 sgl_flags;
1465
1466         if (!data_out_sz && !data_in_sz) {
1467                 _base_build_zero_len_sge_ieee(ioc, psge);
1468                 return;
1469         }
1470
1471         if (data_out_sz && data_in_sz) {
1472                 /* WRITE sgel first */
1473                 sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
1474                     MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
1475                 _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz,
1476                     data_out_dma);
1477
1478                 /* incr sgel */
1479                 psge += ioc->sge_size_ieee;
1480
1481                 /* READ sgel last */
1482                 sgl_flags |= MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
1483                 _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz,
1484                     data_in_dma);
1485         } else if (data_out_sz) /* WRITE */ {
1486                 sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
1487                     MPI25_IEEE_SGE_FLAGS_END_OF_LIST |
1488                     MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
1489                 _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz,
1490                     data_out_dma);
1491         } else if (data_in_sz) /* READ */ {
1492                 sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
1493                     MPI25_IEEE_SGE_FLAGS_END_OF_LIST |
1494                     MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
1495                 _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz,
1496                     data_in_dma);
1497         }
1498 }
1499
1500 #define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
1501
1502 /**
1503  * _base_config_dma_addressing - set dma addressing
1504  * @ioc: per adapter object
1505  * @pdev: PCI device struct
1506  *
1507  * Returns 0 for success, non-zero for failure.
1508  */
1509 static int
1510 _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
1511 {
1512         struct sysinfo s;
1513         u64 consistent_dma_mask;
1514
1515         if (ioc->dma_mask)
1516                 consistent_dma_mask = DMA_BIT_MASK(64);
1517         else
1518                 consistent_dma_mask = DMA_BIT_MASK(32);
1519
1520         if (sizeof(dma_addr_t) > 4) {
1521                 const uint64_t required_mask =
1522                     dma_get_required_mask(&pdev->dev);
1523                 if ((required_mask > DMA_BIT_MASK(32)) &&
1524                     !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
1525                     !pci_set_consistent_dma_mask(pdev, consistent_dma_mask)) {
1526                         ioc->base_add_sg_single = &_base_add_sg_single_64;
1527                         ioc->sge_size = sizeof(Mpi2SGESimple64_t);
1528                         ioc->dma_mask = 64;
1529                         goto out;
1530                 }
1531         }
1532
1533         if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1534             && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
1535                 ioc->base_add_sg_single = &_base_add_sg_single_32;
1536                 ioc->sge_size = sizeof(Mpi2SGESimple32_t);
1537                 ioc->dma_mask = 32;
1538         } else
1539                 return -ENODEV;
1540
1541  out:
1542         si_meminfo(&s);
1543         pr_info(MPT3SAS_FMT
1544                 "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
1545                 ioc->name, ioc->dma_mask, convert_to_kb(s.totalram));
1546
1547         return 0;
1548 }
1549
1550 static int
1551 _base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc,
1552                                       struct pci_dev *pdev)
1553 {
1554         if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
1555                 if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
1556                         return -ENODEV;
1557         }
1558         return 0;
1559 }
1560
1561 /**
1562  * _base_check_enable_msix - checks MSIX capabable.
1563  * @ioc: per adapter object
1564  *
1565  * Check to see if card is capable of MSIX, and set number
1566  * of available msix vectors
1567  */
1568 static int
1569 _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
1570 {
1571         int base;
1572         u16 message_control;
1573
1574         base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
1575         if (!base) {
1576                 dfailprintk(ioc, pr_info(MPT3SAS_FMT "msix not supported\n",
1577                         ioc->name));
1578                 return -EINVAL;
1579         }
1580
1581         /* get msix vector count */
1582
1583         pci_read_config_word(ioc->pdev, base + 2, &message_control);
1584         ioc->msix_vector_count = (message_control & 0x3FF) + 1;
1585         dinitprintk(ioc, pr_info(MPT3SAS_FMT
1586                 "msix is supported, vector_count(%d)\n",
1587                 ioc->name, ioc->msix_vector_count));
1588         return 0;
1589 }
1590
1591 /**
1592  * _base_free_irq - free irq
1593  * @ioc: per adapter object
1594  *
1595  * Freeing respective reply_queue from the list.
1596  */
1597 static void
1598 _base_free_irq(struct MPT3SAS_ADAPTER *ioc)
1599 {
1600         struct adapter_reply_queue *reply_q, *next;
1601
1602         if (list_empty(&ioc->reply_queue_list))
1603                 return;
1604
1605         list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
1606                 list_del(&reply_q->list);
1607                 irq_set_affinity_hint(reply_q->vector, NULL);
1608                 free_cpumask_var(reply_q->affinity_hint);
1609                 synchronize_irq(reply_q->vector);
1610                 free_irq(reply_q->vector, reply_q);
1611                 kfree(reply_q);
1612         }
1613 }
1614
1615 /**
1616  * _base_request_irq - request irq
1617  * @ioc: per adapter object
1618  * @index: msix index into vector table
1619  * @vector: irq vector
1620  *
1621  * Inserting respective reply_queue into the list.
1622  */
1623 static int
1624 _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector)
1625 {
1626         struct adapter_reply_queue *reply_q;
1627         int r;
1628
1629         reply_q =  kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL);
1630         if (!reply_q) {
1631                 pr_err(MPT3SAS_FMT "unable to allocate memory %d!\n",
1632                     ioc->name, (int)sizeof(struct adapter_reply_queue));
1633                 return -ENOMEM;
1634         }
1635         reply_q->ioc = ioc;
1636         reply_q->msix_index = index;
1637         reply_q->vector = vector;
1638
1639         if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL))
1640                 return -ENOMEM;
1641         cpumask_clear(reply_q->affinity_hint);
1642
1643         atomic_set(&reply_q->busy, 0);
1644         if (ioc->msix_enable)
1645                 snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
1646                     MPT3SAS_DRIVER_NAME, ioc->id, index);
1647         else
1648                 snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
1649                     MPT3SAS_DRIVER_NAME, ioc->id);
1650         r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name,
1651             reply_q);
1652         if (r) {
1653                 pr_err(MPT3SAS_FMT "unable to allocate interrupt %d!\n",
1654                     reply_q->name, vector);
1655                 kfree(reply_q);
1656                 return -EBUSY;
1657         }
1658
1659         INIT_LIST_HEAD(&reply_q->list);
1660         list_add_tail(&reply_q->list, &ioc->reply_queue_list);
1661         return 0;
1662 }
1663
1664 /**
1665  * _base_assign_reply_queues - assigning msix index for each cpu
1666  * @ioc: per adapter object
1667  *
1668  * The enduser would need to set the affinity via /proc/irq/#/smp_affinity
1669  *
1670  * It would nice if we could call irq_set_affinity, however it is not
1671  * an exported symbol
1672  */
1673 static void
1674 _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
1675 {
1676         unsigned int cpu, nr_cpus, nr_msix, index = 0;
1677         struct adapter_reply_queue *reply_q;
1678
1679         if (!_base_is_controller_msix_enabled(ioc))
1680                 return;
1681
1682         memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz);
1683
1684         nr_cpus = num_online_cpus();
1685         nr_msix = ioc->reply_queue_count = min(ioc->reply_queue_count,
1686                                                ioc->facts.MaxMSIxVectors);
1687         if (!nr_msix)
1688                 return;
1689
1690         cpu = cpumask_first(cpu_online_mask);
1691
1692         list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
1693
1694                 unsigned int i, group = nr_cpus / nr_msix;
1695
1696                 if (cpu >= nr_cpus)
1697                         break;
1698
1699                 if (index < nr_cpus % nr_msix)
1700                         group++;
1701
1702                 for (i = 0 ; i < group ; i++) {
1703                         ioc->cpu_msix_table[cpu] = index;
1704                         cpumask_or(reply_q->affinity_hint,
1705                                    reply_q->affinity_hint, get_cpu_mask(cpu));
1706                         cpu = cpumask_next(cpu, cpu_online_mask);
1707                 }
1708
1709                 if (irq_set_affinity_hint(reply_q->vector,
1710                                            reply_q->affinity_hint))
1711                         dinitprintk(ioc, pr_info(MPT3SAS_FMT
1712                             "error setting affinity hint for irq vector %d\n",
1713                             ioc->name, reply_q->vector));
1714                 index++;
1715         }
1716 }
1717
1718 /**
1719  * _base_disable_msix - disables msix
1720  * @ioc: per adapter object
1721  *
1722  */
1723 static void
1724 _base_disable_msix(struct MPT3SAS_ADAPTER *ioc)
1725 {
1726         if (!ioc->msix_enable)
1727                 return;
1728         pci_disable_msix(ioc->pdev);
1729         ioc->msix_enable = 0;
1730 }
1731
1732 /**
1733  * _base_enable_msix - enables msix, failback to io_apic
1734  * @ioc: per adapter object
1735  *
1736  */
1737 static int
1738 _base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
1739 {
1740         struct msix_entry *entries, *a;
1741         int r;
1742         int i;
1743         u8 try_msix = 0;
1744
1745         if (msix_disable == -1 || msix_disable == 0)
1746                 try_msix = 1;
1747
1748         if (!try_msix)
1749                 goto try_ioapic;
1750
1751         if (_base_check_enable_msix(ioc) != 0)
1752                 goto try_ioapic;
1753
1754         ioc->reply_queue_count = min_t(int, ioc->cpu_count,
1755             ioc->msix_vector_count);
1756
1757         printk(MPT3SAS_FMT "MSI-X vectors supported: %d, no of cores"
1758           ": %d, max_msix_vectors: %d\n", ioc->name, ioc->msix_vector_count,
1759           ioc->cpu_count, max_msix_vectors);
1760
1761         if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
1762                 max_msix_vectors = 8;
1763
1764         if (max_msix_vectors > 0) {
1765                 ioc->reply_queue_count = min_t(int, max_msix_vectors,
1766                         ioc->reply_queue_count);
1767                 ioc->msix_vector_count = ioc->reply_queue_count;
1768         } else if (max_msix_vectors == 0)
1769                 goto try_ioapic;
1770
1771         entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry),
1772             GFP_KERNEL);
1773         if (!entries) {
1774                 dfailprintk(ioc, pr_info(MPT3SAS_FMT
1775                         "kcalloc failed @ at %s:%d/%s() !!!\n",
1776                         ioc->name, __FILE__, __LINE__, __func__));
1777                 goto try_ioapic;
1778         }
1779
1780         for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++)
1781                 a->entry = i;
1782
1783         r = pci_enable_msix_exact(ioc->pdev, entries, ioc->reply_queue_count);
1784         if (r) {
1785                 dfailprintk(ioc, pr_info(MPT3SAS_FMT
1786                         "pci_enable_msix_exact failed (r=%d) !!!\n",
1787                         ioc->name, r));
1788                 kfree(entries);
1789                 goto try_ioapic;
1790         }
1791
1792         ioc->msix_enable = 1;
1793         for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) {
1794                 r = _base_request_irq(ioc, i, a->vector);
1795                 if (r) {
1796                         _base_free_irq(ioc);
1797                         _base_disable_msix(ioc);
1798                         kfree(entries);
1799                         goto try_ioapic;
1800                 }
1801         }
1802
1803         kfree(entries);
1804         return 0;
1805
1806 /* failback to io_apic interrupt routing */
1807  try_ioapic:
1808
1809         ioc->reply_queue_count = 1;
1810         r = _base_request_irq(ioc, 0, ioc->pdev->irq);
1811
1812         return r;
1813 }
1814
1815 /**
1816  * mpt3sas_base_unmap_resources - free controller resources
1817  * @ioc: per adapter object
1818  */
1819 void
1820 mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
1821 {
1822         struct pci_dev *pdev = ioc->pdev;
1823
1824         dexitprintk(ioc, printk(MPT3SAS_FMT "%s\n",
1825                 ioc->name, __func__));
1826
1827         _base_free_irq(ioc);
1828         _base_disable_msix(ioc);
1829
1830         if (ioc->msix96_vector)
1831                 kfree(ioc->replyPostRegisterIndex);
1832
1833         if (ioc->chip_phys) {
1834                 iounmap(ioc->chip);
1835                 ioc->chip_phys = 0;
1836         }
1837
1838         if (pci_is_enabled(pdev)) {
1839                 pci_release_selected_regions(ioc->pdev, ioc->bars);
1840                 pci_disable_pcie_error_reporting(pdev);
1841                 pci_disable_device(pdev);
1842         }
1843 }
1844
1845 /**
1846  * mpt3sas_base_map_resources - map in controller resources (io/irq/memap)
1847  * @ioc: per adapter object
1848  *
1849  * Returns 0 for success, non-zero for failure.
1850  */
1851 int
1852 mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
1853 {
1854         struct pci_dev *pdev = ioc->pdev;
1855         u32 memap_sz;
1856         u32 pio_sz;
1857         int i, r = 0;
1858         u64 pio_chip = 0;
1859         u64 chip_phys = 0;
1860         struct adapter_reply_queue *reply_q;
1861
1862         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n",
1863             ioc->name, __func__));
1864
1865         ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1866         if (pci_enable_device_mem(pdev)) {
1867                 pr_warn(MPT3SAS_FMT "pci_enable_device_mem: failed\n",
1868                         ioc->name);
1869                 ioc->bars = 0;
1870                 return -ENODEV;
1871         }
1872
1873
1874         if (pci_request_selected_regions(pdev, ioc->bars,
1875             MPT3SAS_DRIVER_NAME)) {
1876                 pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n",
1877                         ioc->name);
1878                 ioc->bars = 0;
1879                 r = -ENODEV;
1880                 goto out_fail;
1881         }
1882
1883 /* AER (Advanced Error Reporting) hooks */
1884         pci_enable_pcie_error_reporting(pdev);
1885
1886         pci_set_master(pdev);
1887
1888
1889         if (_base_config_dma_addressing(ioc, pdev) != 0) {
1890                 pr_warn(MPT3SAS_FMT "no suitable DMA mask for %s\n",
1891                     ioc->name, pci_name(pdev));
1892                 r = -ENODEV;
1893                 goto out_fail;
1894         }
1895
1896         for (i = 0, memap_sz = 0, pio_sz = 0; (i < DEVICE_COUNT_RESOURCE) &&
1897              (!memap_sz || !pio_sz); i++) {
1898                 if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
1899                         if (pio_sz)
1900                                 continue;
1901                         pio_chip = (u64)pci_resource_start(pdev, i);
1902                         pio_sz = pci_resource_len(pdev, i);
1903                 } else if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
1904                         if (memap_sz)
1905                                 continue;
1906                         ioc->chip_phys = pci_resource_start(pdev, i);
1907                         chip_phys = (u64)ioc->chip_phys;
1908                         memap_sz = pci_resource_len(pdev, i);
1909                         ioc->chip = ioremap(ioc->chip_phys, memap_sz);
1910                 }
1911         }
1912
1913         if (ioc->chip == NULL) {
1914                 pr_err(MPT3SAS_FMT "unable to map adapter memory! "
1915                         " or resource not found\n", ioc->name);
1916                 r = -EINVAL;
1917                 goto out_fail;
1918         }
1919
1920         _base_mask_interrupts(ioc);
1921
1922         r = _base_get_ioc_facts(ioc, CAN_SLEEP);
1923         if (r)
1924                 goto out_fail;
1925
1926         if (!ioc->rdpq_array_enable_assigned) {
1927                 ioc->rdpq_array_enable = ioc->rdpq_array_capable;
1928                 ioc->rdpq_array_enable_assigned = 1;
1929         }
1930
1931         r = _base_enable_msix(ioc);
1932         if (r)
1933                 goto out_fail;
1934
1935         /* Use the Combined reply queue feature only for SAS3 C0 & higher
1936          * revision HBAs and also only when reply queue count is greater than 8
1937          */
1938         if (ioc->msix96_vector && ioc->reply_queue_count > 8) {
1939                 /* Determine the Supplemental Reply Post Host Index Registers
1940                  * Addresse. Supplemental Reply Post Host Index Registers
1941                  * starts at offset MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET and
1942                  * each register is at offset bytes of
1943                  * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET from previous one.
1944                  */
1945                 ioc->replyPostRegisterIndex = kcalloc(
1946                      MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT,
1947                      sizeof(resource_size_t *), GFP_KERNEL);
1948                 if (!ioc->replyPostRegisterIndex) {
1949                         dfailprintk(ioc, printk(MPT3SAS_FMT
1950                         "allocation for reply Post Register Index failed!!!\n",
1951                                                                    ioc->name));
1952                         r = -ENOMEM;
1953                         goto out_fail;
1954                 }
1955
1956                 for (i = 0; i < MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT; i++) {
1957                         ioc->replyPostRegisterIndex[i] = (resource_size_t *)
1958                              ((u8 *)&ioc->chip->Doorbell +
1959                              MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET +
1960                              (i * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET));
1961                 }
1962         } else
1963                 ioc->msix96_vector = 0;
1964
1965         list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
1966                 pr_info(MPT3SAS_FMT "%s: IRQ %d\n",
1967                     reply_q->name,  ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
1968                     "IO-APIC enabled"), reply_q->vector);
1969
1970         pr_info(MPT3SAS_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
1971             ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz);
1972         pr_info(MPT3SAS_FMT "ioport(0x%016llx), size(%d)\n",
1973             ioc->name, (unsigned long long)pio_chip, pio_sz);
1974
1975         /* Save PCI configuration state for recovery from PCI AER/EEH errors */
1976         pci_save_state(pdev);
1977         return 0;
1978
1979  out_fail:
1980         mpt3sas_base_unmap_resources(ioc);
1981         return r;
1982 }
1983
1984 /**
1985  * mpt3sas_base_get_msg_frame - obtain request mf pointer
1986  * @ioc: per adapter object
1987  * @smid: system request message index(smid zero is invalid)
1988  *
1989  * Returns virt pointer to message frame.
1990  */
1991 void *
1992 mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid)
1993 {
1994         return (void *)(ioc->request + (smid * ioc->request_sz));
1995 }
1996
1997 /**
1998  * mpt3sas_base_get_sense_buffer - obtain a sense buffer virt addr
1999  * @ioc: per adapter object
2000  * @smid: system request message index
2001  *
2002  * Returns virt pointer to sense buffer.
2003  */
2004 void *
2005 mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid)
2006 {
2007         return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
2008 }
2009
2010 /**
2011  * mpt3sas_base_get_sense_buffer_dma - obtain a sense buffer dma addr
2012  * @ioc: per adapter object
2013  * @smid: system request message index
2014  *
2015  * Returns phys pointer to the low 32bit address of the sense buffer.
2016  */
2017 __le32
2018 mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid)
2019 {
2020         return cpu_to_le32(ioc->sense_dma + ((smid - 1) *
2021             SCSI_SENSE_BUFFERSIZE));
2022 }
2023
2024 /**
2025  * mpt3sas_base_get_reply_virt_addr - obtain reply frames virt address
2026  * @ioc: per adapter object
2027  * @phys_addr: lower 32 physical addr of the reply
2028  *
2029  * Converts 32bit lower physical addr into a virt address.
2030  */
2031 void *
2032 mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 phys_addr)
2033 {
2034         if (!phys_addr)
2035                 return NULL;
2036         return ioc->reply + (phys_addr - (u32)ioc->reply_dma);
2037 }
2038
2039 /**
2040  * mpt3sas_base_get_smid - obtain a free smid from internal queue
2041  * @ioc: per adapter object
2042  * @cb_idx: callback index
2043  *
2044  * Returns smid (zero is invalid)
2045  */
2046 u16
2047 mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx)
2048 {
2049         unsigned long flags;
2050         struct request_tracker *request;
2051         u16 smid;
2052
2053         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2054         if (list_empty(&ioc->internal_free_list)) {
2055                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2056                 pr_err(MPT3SAS_FMT "%s: smid not available\n",
2057                     ioc->name, __func__);
2058                 return 0;
2059         }
2060
2061         request = list_entry(ioc->internal_free_list.next,
2062             struct request_tracker, tracker_list);
2063         request->cb_idx = cb_idx;
2064         smid = request->smid;
2065         list_del(&request->tracker_list);
2066         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2067         return smid;
2068 }
2069
2070 /**
2071  * mpt3sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
2072  * @ioc: per adapter object
2073  * @cb_idx: callback index
2074  * @scmd: pointer to scsi command object
2075  *
2076  * Returns smid (zero is invalid)
2077  */
2078 u16
2079 mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
2080         struct scsi_cmnd *scmd)
2081 {
2082         unsigned long flags;
2083         struct scsiio_tracker *request;
2084         u16 smid;
2085
2086         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2087         if (list_empty(&ioc->free_list)) {
2088                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2089                 pr_err(MPT3SAS_FMT "%s: smid not available\n",
2090                     ioc->name, __func__);
2091                 return 0;
2092         }
2093
2094         request = list_entry(ioc->free_list.next,
2095             struct scsiio_tracker, tracker_list);
2096         request->scmd = scmd;
2097         request->cb_idx = cb_idx;
2098         smid = request->smid;
2099         list_del(&request->tracker_list);
2100         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2101         return smid;
2102 }
2103
2104 /**
2105  * mpt3sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
2106  * @ioc: per adapter object
2107  * @cb_idx: callback index
2108  *
2109  * Returns smid (zero is invalid)
2110  */
2111 u16
2112 mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx)
2113 {
2114         unsigned long flags;
2115         struct request_tracker *request;
2116         u16 smid;
2117
2118         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2119         if (list_empty(&ioc->hpr_free_list)) {
2120                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2121                 return 0;
2122         }
2123
2124         request = list_entry(ioc->hpr_free_list.next,
2125             struct request_tracker, tracker_list);
2126         request->cb_idx = cb_idx;
2127         smid = request->smid;
2128         list_del(&request->tracker_list);
2129         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2130         return smid;
2131 }
2132
2133 /**
2134  * mpt3sas_base_free_smid - put smid back on free_list
2135  * @ioc: per adapter object
2136  * @smid: system request message index
2137  *
2138  * Return nothing.
2139  */
2140 void
2141 mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
2142 {
2143         unsigned long flags;
2144         int i;
2145         struct chain_tracker *chain_req, *next;
2146
2147         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2148         if (smid < ioc->hi_priority_smid) {
2149                 /* scsiio queue */
2150                 i = smid - 1;
2151                 if (!list_empty(&ioc->scsi_lookup[i].chain_list)) {
2152                         list_for_each_entry_safe(chain_req, next,
2153                             &ioc->scsi_lookup[i].chain_list, tracker_list) {
2154                                 list_del_init(&chain_req->tracker_list);
2155                                 list_add(&chain_req->tracker_list,
2156                                     &ioc->free_chain_list);
2157                         }
2158                 }
2159                 ioc->scsi_lookup[i].cb_idx = 0xFF;
2160                 ioc->scsi_lookup[i].scmd = NULL;
2161                 list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list);
2162                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2163
2164                 /*
2165                  * See _wait_for_commands_to_complete() call with regards
2166                  * to this code.
2167                  */
2168                 if (ioc->shost_recovery && ioc->pending_io_count) {
2169                         if (ioc->pending_io_count == 1)
2170                                 wake_up(&ioc->reset_wq);
2171                         ioc->pending_io_count--;
2172                 }
2173                 return;
2174         } else if (smid < ioc->internal_smid) {
2175                 /* hi-priority */
2176                 i = smid - ioc->hi_priority_smid;
2177                 ioc->hpr_lookup[i].cb_idx = 0xFF;
2178                 list_add(&ioc->hpr_lookup[i].tracker_list, &ioc->hpr_free_list);
2179         } else if (smid <= ioc->hba_queue_depth) {
2180                 /* internal queue */
2181                 i = smid - ioc->internal_smid;
2182                 ioc->internal_lookup[i].cb_idx = 0xFF;
2183                 list_add(&ioc->internal_lookup[i].tracker_list,
2184                     &ioc->internal_free_list);
2185         }
2186         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2187 }
2188
2189 /**
2190  * _base_writeq - 64 bit write to MMIO
2191  * @ioc: per adapter object
2192  * @b: data payload
2193  * @addr: address in MMIO space
2194  * @writeq_lock: spin lock
2195  *
2196  * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
2197  * care of 32 bit environment where its not quarenteed to send the entire word
2198  * in one transfer.
2199  */
2200 #if defined(writeq) && defined(CONFIG_64BIT)
2201 static inline void
2202 _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
2203 {
2204         writeq(cpu_to_le64(b), addr);
2205 }
2206 #else
2207 static inline void
2208 _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
2209 {
2210         unsigned long flags;
2211         __u64 data_out = cpu_to_le64(b);
2212
2213         spin_lock_irqsave(writeq_lock, flags);
2214         writel((u32)(data_out), addr);
2215         writel((u32)(data_out >> 32), (addr + 4));
2216         spin_unlock_irqrestore(writeq_lock, flags);
2217 }
2218 #endif
2219
2220 static inline u8
2221 _base_get_msix_index(struct MPT3SAS_ADAPTER *ioc)
2222 {
2223         return ioc->cpu_msix_table[raw_smp_processor_id()];
2224 }
2225
2226 /**
2227  * mpt3sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
2228  * @ioc: per adapter object
2229  * @smid: system request message index
2230  * @handle: device handle
2231  *
2232  * Return nothing.
2233  */
2234 void
2235 mpt3sas_base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle)
2236 {
2237         Mpi2RequestDescriptorUnion_t descriptor;
2238         u64 *request = (u64 *)&descriptor;
2239
2240
2241         descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
2242         descriptor.SCSIIO.MSIxIndex =  _base_get_msix_index(ioc);
2243         descriptor.SCSIIO.SMID = cpu_to_le16(smid);
2244         descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
2245         descriptor.SCSIIO.LMID = 0;
2246         _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
2247             &ioc->scsi_lookup_lock);
2248 }
2249
2250 /**
2251  * mpt3sas_base_put_smid_fast_path - send fast path request to firmware
2252  * @ioc: per adapter object
2253  * @smid: system request message index
2254  * @handle: device handle
2255  *
2256  * Return nothing.
2257  */
2258 void
2259 mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
2260         u16 handle)
2261 {
2262         Mpi2RequestDescriptorUnion_t descriptor;
2263         u64 *request = (u64 *)&descriptor;
2264
2265         descriptor.SCSIIO.RequestFlags =
2266             MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
2267         descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
2268         descriptor.SCSIIO.SMID = cpu_to_le16(smid);
2269         descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
2270         descriptor.SCSIIO.LMID = 0;
2271         _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
2272             &ioc->scsi_lookup_lock);
2273 }
2274
2275 /**
2276  * mpt3sas_base_put_smid_hi_priority - send Task Managment request to firmware
2277  * @ioc: per adapter object
2278  * @smid: system request message index
2279  *
2280  * Return nothing.
2281  */
2282 void
2283 mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid)
2284 {
2285         Mpi2RequestDescriptorUnion_t descriptor;
2286         u64 *request = (u64 *)&descriptor;
2287
2288         descriptor.HighPriority.RequestFlags =
2289             MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
2290         descriptor.HighPriority.MSIxIndex =  0;
2291         descriptor.HighPriority.SMID = cpu_to_le16(smid);
2292         descriptor.HighPriority.LMID = 0;
2293         descriptor.HighPriority.Reserved1 = 0;
2294         _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
2295             &ioc->scsi_lookup_lock);
2296 }
2297
2298 /**
2299  * mpt3sas_base_put_smid_default - Default, primarily used for config pages
2300  * @ioc: per adapter object
2301  * @smid: system request message index
2302  *
2303  * Return nothing.
2304  */
2305 void
2306 mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid)
2307 {
2308         Mpi2RequestDescriptorUnion_t descriptor;
2309         u64 *request = (u64 *)&descriptor;
2310
2311         descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
2312         descriptor.Default.MSIxIndex =  _base_get_msix_index(ioc);
2313         descriptor.Default.SMID = cpu_to_le16(smid);
2314         descriptor.Default.LMID = 0;
2315         descriptor.Default.DescriptorTypeDependent = 0;
2316         _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
2317             &ioc->scsi_lookup_lock);
2318 }
2319
2320 /**
2321  * _base_display_intel_branding - Display branding string
2322  * @ioc: per adapter object
2323  *
2324  * Return nothing.
2325  */
2326 static void
2327 _base_display_intel_branding(struct MPT3SAS_ADAPTER *ioc)
2328 {
2329         if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL)
2330                 return;
2331
2332         switch (ioc->pdev->device) {
2333         case MPI25_MFGPAGE_DEVID_SAS3008:
2334                 switch (ioc->pdev->subsystem_device) {
2335                 case MPT3SAS_INTEL_RMS3JC080_SSDID:
2336                         pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2337                                 MPT3SAS_INTEL_RMS3JC080_BRANDING);
2338                         break;
2339
2340                 case MPT3SAS_INTEL_RS3GC008_SSDID:
2341                         pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2342                                 MPT3SAS_INTEL_RS3GC008_BRANDING);
2343                         break;
2344                 case MPT3SAS_INTEL_RS3FC044_SSDID:
2345                         pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2346                                 MPT3SAS_INTEL_RS3FC044_BRANDING);
2347                         break;
2348                 case MPT3SAS_INTEL_RS3UC080_SSDID:
2349                         pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2350                                 MPT3SAS_INTEL_RS3UC080_BRANDING);
2351                         break;
2352                 default:
2353                         pr_info(MPT3SAS_FMT
2354                                 "Intel(R) Controller: Subsystem ID: 0x%X\n",
2355                                 ioc->name, ioc->pdev->subsystem_device);
2356                         break;
2357                 }
2358                 break;
2359         default:
2360                 pr_info(MPT3SAS_FMT
2361                         "Intel(R) Controller: Subsystem ID: 0x%X\n",
2362                         ioc->name, ioc->pdev->subsystem_device);
2363                 break;
2364         }
2365 }
2366
2367
2368
2369 /**
2370  * _base_display_dell_branding - Display branding string
2371  * @ioc: per adapter object
2372  *
2373  * Return nothing.
2374  */
2375 static void
2376 _base_display_dell_branding(struct MPT3SAS_ADAPTER *ioc)
2377 {
2378         if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
2379                 return;
2380
2381         switch (ioc->pdev->device) {
2382         case MPI25_MFGPAGE_DEVID_SAS3008:
2383                 switch (ioc->pdev->subsystem_device) {
2384                 case MPT3SAS_DELL_12G_HBA_SSDID:
2385                         pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2386                                 MPT3SAS_DELL_12G_HBA_BRANDING);
2387                         break;
2388                 default:
2389                         pr_info(MPT3SAS_FMT
2390                            "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name,
2391                            ioc->pdev->subsystem_device);
2392                         break;
2393                 }
2394                 break;
2395         default:
2396                 pr_info(MPT3SAS_FMT
2397                         "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name,
2398                         ioc->pdev->subsystem_device);
2399                 break;
2400         }
2401 }
2402
2403
2404 /**
2405  * _base_display_ioc_capabilities - Disply IOC's capabilities.
2406  * @ioc: per adapter object
2407  *
2408  * Return nothing.
2409  */
2410 static void
2411 _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc)
2412 {
2413         int i = 0;
2414         char desc[16];
2415         u32 iounit_pg1_flags;
2416         u32 bios_version;
2417
2418         bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
2419         strncpy(desc, ioc->manu_pg0.ChipName, 16);
2420         pr_info(MPT3SAS_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "\
2421            "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
2422             ioc->name, desc,
2423            (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
2424            (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
2425            (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
2426            ioc->facts.FWVersion.Word & 0x000000FF,
2427            ioc->pdev->revision,
2428            (bios_version & 0xFF000000) >> 24,
2429            (bios_version & 0x00FF0000) >> 16,
2430            (bios_version & 0x0000FF00) >> 8,
2431             bios_version & 0x000000FF);
2432
2433         _base_display_intel_branding(ioc);
2434         _base_display_dell_branding(ioc);
2435
2436         pr_info(MPT3SAS_FMT "Protocol=(", ioc->name);
2437
2438         if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
2439                 pr_info("Initiator");
2440                 i++;
2441         }
2442
2443         if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) {
2444                 pr_info("%sTarget", i ? "," : "");
2445                 i++;
2446         }
2447
2448         i = 0;
2449         pr_info("), ");
2450         pr_info("Capabilities=(");
2451
2452         if (ioc->facts.IOCCapabilities &
2453                     MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
2454                         pr_info("Raid");
2455                         i++;
2456         }
2457
2458         if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
2459                 pr_info("%sTLR", i ? "," : "");
2460                 i++;
2461         }
2462
2463         if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) {
2464                 pr_info("%sMulticast", i ? "," : "");
2465                 i++;
2466         }
2467
2468         if (ioc->facts.IOCCapabilities &
2469             MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) {
2470                 pr_info("%sBIDI Target", i ? "," : "");
2471                 i++;
2472         }
2473
2474         if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) {
2475                 pr_info("%sEEDP", i ? "," : "");
2476                 i++;
2477         }
2478
2479         if (ioc->facts.IOCCapabilities &
2480             MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) {
2481                 pr_info("%sSnapshot Buffer", i ? "," : "");
2482                 i++;
2483         }
2484
2485         if (ioc->facts.IOCCapabilities &
2486             MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) {
2487                 pr_info("%sDiag Trace Buffer", i ? "," : "");
2488                 i++;
2489         }
2490
2491         if (ioc->facts.IOCCapabilities &
2492             MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) {
2493                 pr_info("%sDiag Extended Buffer", i ? "," : "");
2494                 i++;
2495         }
2496
2497         if (ioc->facts.IOCCapabilities &
2498             MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) {
2499                 pr_info("%sTask Set Full", i ? "," : "");
2500                 i++;
2501         }
2502
2503         iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
2504         if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) {
2505                 pr_info("%sNCQ", i ? "," : "");
2506                 i++;
2507         }
2508
2509         pr_info(")\n");
2510 }
2511
2512 /**
2513  * mpt3sas_base_update_missing_delay - change the missing delay timers
2514  * @ioc: per adapter object
2515  * @device_missing_delay: amount of time till device is reported missing
2516  * @io_missing_delay: interval IO is returned when there is a missing device
2517  *
2518  * Return nothing.
2519  *
2520  * Passed on the command line, this function will modify the device missing
2521  * delay, as well as the io missing delay. This should be called at driver
2522  * load time.
2523  */
2524 void
2525 mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
2526         u16 device_missing_delay, u8 io_missing_delay)
2527 {
2528         u16 dmd, dmd_new, dmd_orignal;
2529         u8 io_missing_delay_original;
2530         u16 sz;
2531         Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
2532         Mpi2ConfigReply_t mpi_reply;
2533         u8 num_phys = 0;
2534         u16 ioc_status;
2535
2536         mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
2537         if (!num_phys)
2538                 return;
2539
2540         sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
2541             sizeof(Mpi2SasIOUnit1PhyData_t));
2542         sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
2543         if (!sas_iounit_pg1) {
2544                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
2545                     ioc->name, __FILE__, __LINE__, __func__);
2546                 goto out;
2547         }
2548         if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
2549             sas_iounit_pg1, sz))) {
2550                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
2551                     ioc->name, __FILE__, __LINE__, __func__);
2552                 goto out;
2553         }
2554         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
2555             MPI2_IOCSTATUS_MASK;
2556         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
2557                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
2558                     ioc->name, __FILE__, __LINE__, __func__);
2559                 goto out;
2560         }
2561
2562         /* device missing delay */
2563         dmd = sas_iounit_pg1->ReportDeviceMissingDelay;
2564         if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
2565                 dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
2566         else
2567                 dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
2568         dmd_orignal = dmd;
2569         if (device_missing_delay > 0x7F) {
2570                 dmd = (device_missing_delay > 0x7F0) ? 0x7F0 :
2571                     device_missing_delay;
2572                 dmd = dmd / 16;
2573                 dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16;
2574         } else
2575                 dmd = device_missing_delay;
2576         sas_iounit_pg1->ReportDeviceMissingDelay = dmd;
2577
2578         /* io missing delay */
2579         io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay;
2580         sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay;
2581
2582         if (!mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
2583             sz)) {
2584                 if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
2585                         dmd_new = (dmd &
2586                             MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
2587                 else
2588                         dmd_new =
2589                     dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
2590                 pr_info(MPT3SAS_FMT "device_missing_delay: old(%d), new(%d)\n",
2591                         ioc->name, dmd_orignal, dmd_new);
2592                 pr_info(MPT3SAS_FMT "ioc_missing_delay: old(%d), new(%d)\n",
2593                         ioc->name, io_missing_delay_original,
2594                     io_missing_delay);
2595                 ioc->device_missing_delay = dmd_new;
2596                 ioc->io_missing_delay = io_missing_delay;
2597         }
2598
2599 out:
2600         kfree(sas_iounit_pg1);
2601 }
2602 /**
2603  * _base_static_config_pages - static start of day config pages
2604  * @ioc: per adapter object
2605  *
2606  * Return nothing.
2607  */
2608 static void
2609 _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
2610 {
2611         Mpi2ConfigReply_t mpi_reply;
2612         u32 iounit_pg1_flags;
2613
2614         mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0);
2615         if (ioc->ir_firmware)
2616                 mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
2617                     &ioc->manu_pg10);
2618
2619         /*
2620          * Ensure correct T10 PI operation if vendor left EEDPTagMode
2621          * flag unset in NVDATA.
2622          */
2623         mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11);
2624         if (ioc->manu_pg11.EEDPTagMode == 0) {
2625                 pr_err("%s: overriding NVDATA EEDPTagMode setting\n",
2626                     ioc->name);
2627                 ioc->manu_pg11.EEDPTagMode &= ~0x3;
2628                 ioc->manu_pg11.EEDPTagMode |= 0x1;
2629                 mpt3sas_config_set_manufacturing_pg11(ioc, &mpi_reply,
2630                     &ioc->manu_pg11);
2631         }
2632
2633         mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
2634         mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
2635         mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
2636         mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
2637         mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
2638         mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
2639         _base_display_ioc_capabilities(ioc);
2640
2641         /*
2642          * Enable task_set_full handling in iounit_pg1 when the
2643          * facts capabilities indicate that its supported.
2644          */
2645         iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
2646         if ((ioc->facts.IOCCapabilities &
2647             MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING))
2648                 iounit_pg1_flags &=
2649                     ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
2650         else
2651                 iounit_pg1_flags |=
2652                     MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
2653         ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
2654         mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
2655
2656         if (ioc->iounit_pg8.NumSensors)
2657                 ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
2658 }
2659
2660 /**
2661  * _base_release_memory_pools - release memory
2662  * @ioc: per adapter object
2663  *
2664  * Free memory allocated from _base_allocate_memory_pools.
2665  *
2666  * Return nothing.
2667  */
2668 static void
2669 _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
2670 {
2671         int i = 0;
2672         struct reply_post_struct *rps;
2673
2674         dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2675             __func__));
2676
2677         if (ioc->request) {
2678                 pci_free_consistent(ioc->pdev, ioc->request_dma_sz,
2679                     ioc->request,  ioc->request_dma);
2680                 dexitprintk(ioc, pr_info(MPT3SAS_FMT
2681                         "request_pool(0x%p): free\n",
2682                         ioc->name, ioc->request));
2683                 ioc->request = NULL;
2684         }
2685
2686         if (ioc->sense) {
2687                 pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
2688                 if (ioc->sense_dma_pool)
2689                         pci_pool_destroy(ioc->sense_dma_pool);
2690                 dexitprintk(ioc, pr_info(MPT3SAS_FMT
2691                         "sense_pool(0x%p): free\n",
2692                         ioc->name, ioc->sense));
2693                 ioc->sense = NULL;
2694         }
2695
2696         if (ioc->reply) {
2697                 pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
2698                 if (ioc->reply_dma_pool)
2699                         pci_pool_destroy(ioc->reply_dma_pool);
2700                 dexitprintk(ioc, pr_info(MPT3SAS_FMT
2701                         "reply_pool(0x%p): free\n",
2702                         ioc->name, ioc->reply));
2703                 ioc->reply = NULL;
2704         }
2705
2706         if (ioc->reply_free) {
2707                 pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
2708                     ioc->reply_free_dma);
2709                 if (ioc->reply_free_dma_pool)
2710                         pci_pool_destroy(ioc->reply_free_dma_pool);
2711                 dexitprintk(ioc, pr_info(MPT3SAS_FMT
2712                         "reply_free_pool(0x%p): free\n",
2713                         ioc->name, ioc->reply_free));
2714                 ioc->reply_free = NULL;
2715         }
2716
2717         if (ioc->reply_post) {
2718                 do {
2719                         rps = &ioc->reply_post[i];
2720                         if (rps->reply_post_free) {
2721                                 pci_pool_free(
2722                                     ioc->reply_post_free_dma_pool,
2723                                     rps->reply_post_free,
2724                                     rps->reply_post_free_dma);
2725                                 dexitprintk(ioc, pr_info(MPT3SAS_FMT
2726                                     "reply_post_free_pool(0x%p): free\n",
2727                                     ioc->name, rps->reply_post_free));
2728                                 rps->reply_post_free = NULL;
2729                         }
2730                 } while (ioc->rdpq_array_enable &&
2731                            (++i < ioc->reply_queue_count));
2732
2733                 if (ioc->reply_post_free_dma_pool)
2734                         pci_pool_destroy(ioc->reply_post_free_dma_pool);
2735                 kfree(ioc->reply_post);
2736         }
2737
2738         if (ioc->config_page) {
2739                 dexitprintk(ioc, pr_info(MPT3SAS_FMT
2740                     "config_page(0x%p): free\n", ioc->name,
2741                     ioc->config_page));
2742                 pci_free_consistent(ioc->pdev, ioc->config_page_sz,
2743                     ioc->config_page, ioc->config_page_dma);
2744         }
2745
2746         if (ioc->scsi_lookup) {
2747                 free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages);
2748                 ioc->scsi_lookup = NULL;
2749         }
2750         kfree(ioc->hpr_lookup);
2751         kfree(ioc->internal_lookup);
2752         if (ioc->chain_lookup) {
2753                 for (i = 0; i < ioc->chain_depth; i++) {
2754                         if (ioc->chain_lookup[i].chain_buffer)
2755                                 pci_pool_free(ioc->chain_dma_pool,
2756                                     ioc->chain_lookup[i].chain_buffer,
2757                                     ioc->chain_lookup[i].chain_buffer_dma);
2758                 }
2759                 if (ioc->chain_dma_pool)
2760                         pci_pool_destroy(ioc->chain_dma_pool);
2761                 free_pages((ulong)ioc->chain_lookup, ioc->chain_pages);
2762                 ioc->chain_lookup = NULL;
2763         }
2764 }
2765
2766 /**
2767  * _base_allocate_memory_pools - allocate start of day memory pools
2768  * @ioc: per adapter object
2769  * @sleep_flag: CAN_SLEEP or NO_SLEEP
2770  *
2771  * Returns 0 success, anything else error
2772  */
2773 static int
2774 _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc,  int sleep_flag)
2775 {
2776         struct mpt3sas_facts *facts;
2777         u16 max_sge_elements;
2778         u16 chains_needed_per_io;
2779         u32 sz, total_sz, reply_post_free_sz;
2780         u32 retry_sz;
2781         u16 max_request_credit;
2782         unsigned short sg_tablesize;
2783         u16 sge_size;
2784         int i;
2785
2786         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2787             __func__));
2788
2789
2790         retry_sz = 0;
2791         facts = &ioc->facts;
2792
2793         /* command line tunables for max sgl entries */
2794         if (max_sgl_entries != -1)
2795                 sg_tablesize = max_sgl_entries;
2796         else
2797                 sg_tablesize = MPT3SAS_SG_DEPTH;
2798
2799         if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS)
2800                 sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS;
2801         else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) {
2802                 sg_tablesize = min_t(unsigned short, sg_tablesize,
2803                                       SCSI_MAX_SG_CHAIN_SEGMENTS);
2804                 pr_warn(MPT3SAS_FMT
2805                  "sg_tablesize(%u) is bigger than kernel"
2806                  " defined SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
2807                  sg_tablesize, MPT3SAS_MAX_PHYS_SEGMENTS);
2808         }
2809         ioc->shost->sg_tablesize = sg_tablesize;
2810
2811         ioc->hi_priority_depth = facts->HighPriorityCredit;
2812         ioc->internal_depth = ioc->hi_priority_depth + (5);
2813         /* command line tunables  for max controller queue depth */
2814         if (max_queue_depth != -1 && max_queue_depth != 0) {
2815                 max_request_credit = min_t(u16, max_queue_depth +
2816                     ioc->hi_priority_depth + ioc->internal_depth,
2817                     facts->RequestCredit);
2818                 if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
2819                         max_request_credit =  MAX_HBA_QUEUE_DEPTH;
2820         } else
2821                 max_request_credit = min_t(u16, facts->RequestCredit,
2822                     MAX_HBA_QUEUE_DEPTH);
2823
2824         ioc->hba_queue_depth = max_request_credit;
2825
2826         /* request frame size */
2827         ioc->request_sz = facts->IOCRequestFrameSize * 4;
2828
2829         /* reply frame size */
2830         ioc->reply_sz = facts->ReplyFrameSize * 4;
2831
2832         /* calculate the max scatter element size */
2833         sge_size = max_t(u16, ioc->sge_size, ioc->sge_size_ieee);
2834
2835  retry_allocation:
2836         total_sz = 0;
2837         /* calculate number of sg elements left over in the 1st frame */
2838         max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) -
2839             sizeof(Mpi2SGEIOUnion_t)) + sge_size);
2840         ioc->max_sges_in_main_message = max_sge_elements/sge_size;
2841
2842         /* now do the same for a chain buffer */
2843         max_sge_elements = ioc->request_sz - sge_size;
2844         ioc->max_sges_in_chain_message = max_sge_elements/sge_size;
2845
2846         /*
2847          *  MPT3SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
2848          */
2849         chains_needed_per_io = ((ioc->shost->sg_tablesize -
2850            ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message)
2851             + 1;
2852         if (chains_needed_per_io > facts->MaxChainDepth) {
2853                 chains_needed_per_io = facts->MaxChainDepth;
2854                 ioc->shost->sg_tablesize = min_t(u16,
2855                 ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message
2856                 * chains_needed_per_io), ioc->shost->sg_tablesize);
2857         }
2858         ioc->chains_needed_per_io = chains_needed_per_io;
2859
2860         /* reply free queue sizing - taking into account for 64 FW events */
2861         ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
2862
2863         /* calculate reply descriptor post queue depth */
2864         ioc->reply_post_queue_depth = ioc->hba_queue_depth +
2865                                 ioc->reply_free_queue_depth +  1 ;
2866         /* align the reply post queue on the next 16 count boundary */
2867         if (ioc->reply_post_queue_depth % 16)
2868                 ioc->reply_post_queue_depth += 16 -
2869                 (ioc->reply_post_queue_depth % 16);
2870
2871
2872         if (ioc->reply_post_queue_depth >
2873             facts->MaxReplyDescriptorPostQueueDepth) {
2874                 ioc->reply_post_queue_depth =
2875                                 facts->MaxReplyDescriptorPostQueueDepth -
2876                     (facts->MaxReplyDescriptorPostQueueDepth % 16);
2877                 ioc->hba_queue_depth =
2878                                 ((ioc->reply_post_queue_depth - 64) / 2) - 1;
2879                 ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
2880         }
2881
2882         dinitprintk(ioc, pr_info(MPT3SAS_FMT "scatter gather: " \
2883             "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
2884             "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message,
2885             ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
2886             ioc->chains_needed_per_io));
2887
2888         /* reply post queue, 16 byte align */
2889         reply_post_free_sz = ioc->reply_post_queue_depth *
2890             sizeof(Mpi2DefaultReplyDescriptor_t);
2891
2892         sz = reply_post_free_sz;
2893         if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable)
2894                 sz *= ioc->reply_queue_count;
2895
2896         ioc->reply_post = kcalloc((ioc->rdpq_array_enable) ?
2897             (ioc->reply_queue_count):1,
2898             sizeof(struct reply_post_struct), GFP_KERNEL);
2899
2900         if (!ioc->reply_post) {
2901                 pr_err(MPT3SAS_FMT "reply_post_free pool: kcalloc failed\n",
2902                         ioc->name);
2903                 goto out;
2904         }
2905         ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
2906             ioc->pdev, sz, 16, 0);
2907         if (!ioc->reply_post_free_dma_pool) {
2908                 pr_err(MPT3SAS_FMT
2909                  "reply_post_free pool: pci_pool_create failed\n",
2910                  ioc->name);
2911                 goto out;
2912         }
2913         i = 0;
2914         do {
2915                 ioc->reply_post[i].reply_post_free =
2916                     pci_pool_alloc(ioc->reply_post_free_dma_pool,
2917                     GFP_KERNEL,
2918                     &ioc->reply_post[i].reply_post_free_dma);
2919                 if (!ioc->reply_post[i].reply_post_free) {
2920                         pr_err(MPT3SAS_FMT
2921                         "reply_post_free pool: pci_pool_alloc failed\n",
2922                         ioc->name);
2923                         goto out;
2924                 }
2925                 memset(ioc->reply_post[i].reply_post_free, 0, sz);
2926                 dinitprintk(ioc, pr_info(MPT3SAS_FMT
2927                     "reply post free pool (0x%p): depth(%d),"
2928                     "element_size(%d), pool_size(%d kB)\n", ioc->name,
2929                     ioc->reply_post[i].reply_post_free,
2930                     ioc->reply_post_queue_depth, 8, sz/1024));
2931                 dinitprintk(ioc, pr_info(MPT3SAS_FMT
2932                     "reply_post_free_dma = (0x%llx)\n", ioc->name,
2933                     (unsigned long long)
2934                     ioc->reply_post[i].reply_post_free_dma));
2935                 total_sz += sz;
2936         } while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
2937
2938         if (ioc->dma_mask == 64) {
2939                 if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
2940                         pr_warn(MPT3SAS_FMT
2941                             "no suitable consistent DMA mask for %s\n",
2942                             ioc->name, pci_name(ioc->pdev));
2943                         goto out;
2944                 }
2945         }
2946
2947         ioc->scsiio_depth = ioc->hba_queue_depth -
2948             ioc->hi_priority_depth - ioc->internal_depth;
2949
2950         /* set the scsi host can_queue depth
2951          * with some internal commands that could be outstanding
2952          */
2953         ioc->shost->can_queue = ioc->scsiio_depth;
2954         dinitprintk(ioc, pr_info(MPT3SAS_FMT
2955                 "scsi host: can_queue depth (%d)\n",
2956                 ioc->name, ioc->shost->can_queue));
2957
2958
2959         /* contiguous pool for request and chains, 16 byte align, one extra "
2960          * "frame for smid=0
2961          */
2962         ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
2963         sz = ((ioc->scsiio_depth + 1) * ioc->request_sz);
2964
2965         /* hi-priority queue */
2966         sz += (ioc->hi_priority_depth * ioc->request_sz);
2967
2968         /* internal queue */
2969         sz += (ioc->internal_depth * ioc->request_sz);
2970
2971         ioc->request_dma_sz = sz;
2972         ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma);
2973         if (!ioc->request) {
2974                 pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \
2975                     "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
2976                     "total(%d kB)\n", ioc->name, ioc->hba_queue_depth,
2977                     ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
2978                 if (ioc->scsiio_depth < MPT3SAS_SAS_QUEUE_DEPTH)
2979                         goto out;
2980                 retry_sz += 64;
2981                 ioc->hba_queue_depth = max_request_credit - retry_sz;
2982                 goto retry_allocation;
2983         }
2984
2985         if (retry_sz)
2986                 pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \
2987                     "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
2988                     "total(%d kb)\n", ioc->name, ioc->hba_queue_depth,
2989                     ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
2990
2991         /* hi-priority queue */
2992         ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
2993             ioc->request_sz);
2994         ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
2995             ioc->request_sz);
2996
2997         /* internal queue */
2998         ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
2999             ioc->request_sz);
3000         ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
3001             ioc->request_sz);
3002
3003         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3004                 "request pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n",
3005                 ioc->name, ioc->request, ioc->hba_queue_depth, ioc->request_sz,
3006             (ioc->hba_queue_depth * ioc->request_sz)/1024));
3007
3008         dinitprintk(ioc, pr_info(MPT3SAS_FMT "request pool: dma(0x%llx)\n",
3009             ioc->name, (unsigned long long) ioc->request_dma));
3010         total_sz += sz;
3011
3012         sz = ioc->scsiio_depth * sizeof(struct scsiio_tracker);
3013         ioc->scsi_lookup_pages = get_order(sz);
3014         ioc->scsi_lookup = (struct scsiio_tracker *)__get_free_pages(
3015             GFP_KERNEL, ioc->scsi_lookup_pages);
3016         if (!ioc->scsi_lookup) {
3017                 pr_err(MPT3SAS_FMT "scsi_lookup: get_free_pages failed, sz(%d)\n",
3018                         ioc->name, (int)sz);
3019                 goto out;
3020         }
3021
3022         dinitprintk(ioc, pr_info(MPT3SAS_FMT "scsiio(0x%p): depth(%d)\n",
3023                 ioc->name, ioc->request, ioc->scsiio_depth));
3024
3025         ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH);
3026         sz = ioc->chain_depth * sizeof(struct chain_tracker);
3027         ioc->chain_pages = get_order(sz);
3028         ioc->chain_lookup = (struct chain_tracker *)__get_free_pages(
3029             GFP_KERNEL, ioc->chain_pages);
3030         if (!ioc->chain_lookup) {
3031                 pr_err(MPT3SAS_FMT "chain_lookup: __get_free_pages failed\n",
3032                         ioc->name);
3033                 goto out;
3034         }
3035         ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev,
3036             ioc->request_sz, 16, 0);
3037         if (!ioc->chain_dma_pool) {
3038                 pr_err(MPT3SAS_FMT "chain_dma_pool: pci_pool_create failed\n",
3039                         ioc->name);
3040                 goto out;
3041         }
3042         for (i = 0; i < ioc->chain_depth; i++) {
3043                 ioc->chain_lookup[i].chain_buffer = pci_pool_alloc(
3044                     ioc->chain_dma_pool , GFP_KERNEL,
3045                     &ioc->chain_lookup[i].chain_buffer_dma);
3046                 if (!ioc->chain_lookup[i].chain_buffer) {
3047                         ioc->chain_depth = i;
3048                         goto chain_done;
3049                 }
3050                 total_sz += ioc->request_sz;
3051         }
3052  chain_done:
3053         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3054                 "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n",
3055                 ioc->name, ioc->chain_depth, ioc->request_sz,
3056                 ((ioc->chain_depth *  ioc->request_sz))/1024));
3057
3058         /* initialize hi-priority queue smid's */
3059         ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
3060             sizeof(struct request_tracker), GFP_KERNEL);
3061         if (!ioc->hpr_lookup) {
3062                 pr_err(MPT3SAS_FMT "hpr_lookup: kcalloc failed\n",
3063                     ioc->name);
3064                 goto out;
3065         }
3066         ioc->hi_priority_smid = ioc->scsiio_depth + 1;
3067         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3068                 "hi_priority(0x%p): depth(%d), start smid(%d)\n",
3069                 ioc->name, ioc->hi_priority,
3070             ioc->hi_priority_depth, ioc->hi_priority_smid));
3071
3072         /* initialize internal queue smid's */
3073         ioc->internal_lookup = kcalloc(ioc->internal_depth,
3074             sizeof(struct request_tracker), GFP_KERNEL);
3075         if (!ioc->internal_lookup) {
3076                 pr_err(MPT3SAS_FMT "internal_lookup: kcalloc failed\n",
3077                     ioc->name);
3078                 goto out;
3079         }
3080         ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
3081         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3082                 "internal(0x%p): depth(%d), start smid(%d)\n",
3083                 ioc->name, ioc->internal,
3084             ioc->internal_depth, ioc->internal_smid));
3085
3086         /* sense buffers, 4 byte align */
3087         sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
3088         ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4,
3089             0);
3090         if (!ioc->sense_dma_pool) {
3091                 pr_err(MPT3SAS_FMT "sense pool: pci_pool_create failed\n",
3092                     ioc->name);
3093                 goto out;
3094         }
3095         ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL,
3096             &ioc->sense_dma);
3097         if (!ioc->sense) {
3098                 pr_err(MPT3SAS_FMT "sense pool: pci_pool_alloc failed\n",
3099                     ioc->name);
3100                 goto out;
3101         }
3102         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3103             "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
3104             "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth,
3105             SCSI_SENSE_BUFFERSIZE, sz/1024));
3106         dinitprintk(ioc, pr_info(MPT3SAS_FMT "sense_dma(0x%llx)\n",
3107             ioc->name, (unsigned long long)ioc->sense_dma));
3108         total_sz += sz;
3109
3110         /* reply pool, 4 byte align */
3111         sz = ioc->reply_free_queue_depth * ioc->reply_sz;
3112         ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4,
3113             0);
3114         if (!ioc->reply_dma_pool) {
3115                 pr_err(MPT3SAS_FMT "reply pool: pci_pool_create failed\n",
3116                     ioc->name);
3117                 goto out;
3118         }
3119         ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL,
3120             &ioc->reply_dma);
3121         if (!ioc->reply) {
3122                 pr_err(MPT3SAS_FMT "reply pool: pci_pool_alloc failed\n",
3123                     ioc->name);
3124                 goto out;
3125         }
3126         ioc->reply_dma_min_address = (u32)(ioc->reply_dma);
3127         ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz;
3128         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3129                 "reply pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n",
3130                 ioc->name, ioc->reply,
3131             ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024));
3132         dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_dma(0x%llx)\n",
3133             ioc->name, (unsigned long long)ioc->reply_dma));
3134         total_sz += sz;
3135
3136         /* reply free queue, 16 byte align */
3137         sz = ioc->reply_free_queue_depth * 4;
3138         ioc->reply_free_dma_pool = pci_pool_create("reply_free pool",
3139             ioc->pdev, sz, 16, 0);
3140         if (!ioc->reply_free_dma_pool) {
3141                 pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_create failed\n",
3142                         ioc->name);
3143                 goto out;
3144         }
3145         ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL,
3146             &ioc->reply_free_dma);
3147         if (!ioc->reply_free) {
3148                 pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_alloc failed\n",
3149                         ioc->name);
3150                 goto out;
3151         }
3152         memset(ioc->reply_free, 0, sz);
3153         dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_free pool(0x%p): " \
3154             "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name,
3155             ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024));
3156         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3157                 "reply_free_dma (0x%llx)\n",
3158                 ioc->name, (unsigned long long)ioc->reply_free_dma));
3159         total_sz += sz;
3160
3161         ioc->config_page_sz = 512;
3162         ioc->config_page = pci_alloc_consistent(ioc->pdev,
3163             ioc->config_page_sz, &ioc->config_page_dma);
3164         if (!ioc->config_page) {
3165                 pr_err(MPT3SAS_FMT
3166                         "config page: pci_pool_alloc failed\n",
3167                         ioc->name);
3168                 goto out;
3169         }
3170         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3171                 "config page(0x%p): size(%d)\n",
3172                 ioc->name, ioc->config_page, ioc->config_page_sz));
3173         dinitprintk(ioc, pr_info(MPT3SAS_FMT "config_page_dma(0x%llx)\n",
3174                 ioc->name, (unsigned long long)ioc->config_page_dma));
3175         total_sz += ioc->config_page_sz;
3176
3177         pr_info(MPT3SAS_FMT "Allocated physical memory: size(%d kB)\n",
3178             ioc->name, total_sz/1024);
3179         pr_info(MPT3SAS_FMT
3180                 "Current Controller Queue Depth(%d),Max Controller Queue Depth(%d)\n",
3181             ioc->name, ioc->shost->can_queue, facts->RequestCredit);
3182         pr_info(MPT3SAS_FMT "Scatter Gather Elements per IO(%d)\n",
3183             ioc->name, ioc->shost->sg_tablesize);
3184         return 0;
3185
3186  out:
3187         return -ENOMEM;
3188 }
3189
3190 /**
3191  * mpt3sas_base_get_iocstate - Get the current state of a MPT adapter.
3192  * @ioc: Pointer to MPT_ADAPTER structure
3193  * @cooked: Request raw or cooked IOC state
3194  *
3195  * Returns all IOC Doorbell register bits if cooked==0, else just the
3196  * Doorbell bits in MPI_IOC_STATE_MASK.
3197  */
3198 u32
3199 mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked)
3200 {
3201         u32 s, sc;
3202
3203         s = readl(&ioc->chip->Doorbell);
3204         sc = s & MPI2_IOC_STATE_MASK;
3205         return cooked ? sc : s;
3206 }
3207
3208 /**
3209  * _base_wait_on_iocstate - waiting on a particular ioc state
3210  * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
3211  * @timeout: timeout in second
3212  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3213  *
3214  * Returns 0 for success, non-zero for failure.
3215  */
3216 static int
3217 _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
3218         int sleep_flag)
3219 {
3220         u32 count, cntdn;
3221         u32 current_state;
3222
3223         count = 0;
3224         cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
3225         do {
3226                 current_state = mpt3sas_base_get_iocstate(ioc, 1);
3227                 if (current_state == ioc_state)
3228                         return 0;
3229                 if (count && current_state == MPI2_IOC_STATE_FAULT)
3230                         break;
3231                 if (sleep_flag == CAN_SLEEP)
3232                         usleep_range(1000, 1500);
3233                 else
3234                         udelay(500);
3235                 count++;
3236         } while (--cntdn);
3237
3238         return current_state;
3239 }
3240
3241 /**
3242  * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
3243  * a write to the doorbell)
3244  * @ioc: per adapter object
3245  * @timeout: timeout in second
3246  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3247  *
3248  * Returns 0 for success, non-zero for failure.
3249  *
3250  * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
3251  */
3252 static int
3253 _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
3254
3255 static int
3256 _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
3257         int sleep_flag)
3258 {
3259         u32 cntdn, count;
3260         u32 int_status;
3261
3262         count = 0;
3263         cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
3264         do {
3265                 int_status = readl(&ioc->chip->HostInterruptStatus);
3266                 if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
3267                         dhsprintk(ioc, pr_info(MPT3SAS_FMT
3268                                 "%s: successful count(%d), timeout(%d)\n",
3269                                 ioc->name, __func__, count, timeout));
3270                         return 0;
3271                 }
3272                 if (sleep_flag == CAN_SLEEP)
3273                         usleep_range(1000, 1500);
3274                 else
3275                         udelay(500);
3276                 count++;
3277         } while (--cntdn);
3278
3279         pr_err(MPT3SAS_FMT
3280                 "%s: failed due to timeout count(%d), int_status(%x)!\n",
3281                 ioc->name, __func__, count, int_status);
3282         return -EFAULT;
3283 }
3284
3285 /**
3286  * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
3287  * @ioc: per adapter object
3288  * @timeout: timeout in second
3289  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3290  *
3291  * Returns 0 for success, non-zero for failure.
3292  *
3293  * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
3294  * doorbell.
3295  */
3296 static int
3297 _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout,
3298         int sleep_flag)
3299 {
3300         u32 cntdn, count;
3301         u32 int_status;
3302         u32 doorbell;
3303
3304         count = 0;
3305         cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
3306         do {
3307                 int_status = readl(&ioc->chip->HostInterruptStatus);
3308                 if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
3309                         dhsprintk(ioc, pr_info(MPT3SAS_FMT
3310                                 "%s: successful count(%d), timeout(%d)\n",
3311                                 ioc->name, __func__, count, timeout));
3312                         return 0;
3313                 } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
3314                         doorbell = readl(&ioc->chip->Doorbell);
3315                         if ((doorbell & MPI2_IOC_STATE_MASK) ==
3316                             MPI2_IOC_STATE_FAULT) {
3317                                 mpt3sas_base_fault_info(ioc , doorbell);
3318                                 return -EFAULT;
3319                         }
3320                 } else if (int_status == 0xFFFFFFFF)
3321                         goto out;
3322
3323                 if (sleep_flag == CAN_SLEEP)
3324                         usleep_range(1000, 1500);
3325                 else
3326                         udelay(500);
3327                 count++;
3328         } while (--cntdn);
3329
3330  out:
3331         pr_err(MPT3SAS_FMT
3332          "%s: failed due to timeout count(%d), int_status(%x)!\n",
3333          ioc->name, __func__, count, int_status);
3334         return -EFAULT;
3335 }
3336
3337 /**
3338  * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
3339  * @ioc: per adapter object
3340  * @timeout: timeout in second
3341  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3342  *
3343  * Returns 0 for success, non-zero for failure.
3344  *
3345  */
3346 static int
3347 _base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout,
3348         int sleep_flag)
3349 {
3350         u32 cntdn, count;
3351         u32 doorbell_reg;
3352
3353         count = 0;
3354         cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
3355         do {
3356                 doorbell_reg = readl(&ioc->chip->Doorbell);
3357                 if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
3358                         dhsprintk(ioc, pr_info(MPT3SAS_FMT
3359                                 "%s: successful count(%d), timeout(%d)\n",
3360                                 ioc->name, __func__, count, timeout));
3361                         return 0;
3362                 }
3363                 if (sleep_flag == CAN_SLEEP)
3364                         usleep_range(1000, 1500);
3365                 else
3366                         udelay(500);
3367                 count++;
3368         } while (--cntdn);
3369
3370         pr_err(MPT3SAS_FMT
3371                 "%s: failed due to timeout count(%d), doorbell_reg(%x)!\n",
3372                 ioc->name, __func__, count, doorbell_reg);
3373         return -EFAULT;
3374 }
3375
3376 /**
3377  * _base_send_ioc_reset - send doorbell reset
3378  * @ioc: per adapter object
3379  * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
3380  * @timeout: timeout in second
3381  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3382  *
3383  * Returns 0 for success, non-zero for failure.
3384  */
3385 static int
3386 _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout,
3387         int sleep_flag)
3388 {
3389         u32 ioc_state;
3390         int r = 0;
3391
3392         if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) {
3393                 pr_err(MPT3SAS_FMT "%s: unknown reset_type\n",
3394                     ioc->name, __func__);
3395                 return -EFAULT;
3396         }
3397
3398         if (!(ioc->facts.IOCCapabilities &
3399            MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY))
3400                 return -EFAULT;
3401
3402         pr_info(MPT3SAS_FMT "sending message unit reset !!\n", ioc->name);
3403
3404         writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
3405             &ioc->chip->Doorbell);
3406         if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) {
3407                 r = -EFAULT;
3408                 goto out;
3409         }
3410         ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
3411             timeout, sleep_flag);
3412         if (ioc_state) {
3413                 pr_err(MPT3SAS_FMT
3414                         "%s: failed going to ready state (ioc_state=0x%x)\n",
3415                         ioc->name, __func__, ioc_state);
3416                 r = -EFAULT;
3417                 goto out;
3418         }
3419  out:
3420         pr_info(MPT3SAS_FMT "message unit reset: %s\n",
3421             ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
3422         return r;
3423 }
3424
3425 /**
3426  * _base_handshake_req_reply_wait - send request thru doorbell interface
3427  * @ioc: per adapter object
3428  * @request_bytes: request length
3429  * @request: pointer having request payload
3430  * @reply_bytes: reply length
3431  * @reply: pointer to reply payload
3432  * @timeout: timeout in second
3433  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3434  *
3435  * Returns 0 for success, non-zero for failure.
3436  */
3437 static int
3438 _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
3439         u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
3440 {
3441         MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
3442         int i;
3443         u8 failed;
3444         u16 dummy;
3445         __le32 *mfp;
3446
3447         /* make sure doorbell is not in use */
3448         if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
3449                 pr_err(MPT3SAS_FMT
3450                         "doorbell is in use (line=%d)\n",
3451                         ioc->name, __LINE__);
3452                 return -EFAULT;
3453         }
3454
3455         /* clear pending doorbell interrupts from previous state changes */
3456         if (readl(&ioc->chip->HostInterruptStatus) &
3457             MPI2_HIS_IOC2SYS_DB_STATUS)
3458                 writel(0, &ioc->chip->HostInterruptStatus);
3459
3460         /* send message to ioc */
3461         writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
3462             ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
3463             &ioc->chip->Doorbell);
3464
3465         if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
3466                 pr_err(MPT3SAS_FMT
3467                         "doorbell handshake int failed (line=%d)\n",
3468                         ioc->name, __LINE__);
3469                 return -EFAULT;
3470         }
3471         writel(0, &ioc->chip->HostInterruptStatus);
3472
3473         if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
3474                 pr_err(MPT3SAS_FMT
3475                         "doorbell handshake ack failed (line=%d)\n",
3476                         ioc->name, __LINE__);
3477                 return -EFAULT;
3478         }
3479
3480         /* send message 32-bits at a time */
3481         for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
3482                 writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
3483                 if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
3484                         failed = 1;
3485         }
3486
3487         if (failed) {
3488                 pr_err(MPT3SAS_FMT
3489                         "doorbell handshake sending request failed (line=%d)\n",
3490                         ioc->name, __LINE__);
3491                 return -EFAULT;
3492         }
3493
3494         /* now wait for the reply */
3495         if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
3496                 pr_err(MPT3SAS_FMT
3497                         "doorbell handshake int failed (line=%d)\n",
3498                         ioc->name, __LINE__);
3499                 return -EFAULT;
3500         }
3501
3502         /* read the first two 16-bits, it gives the total length of the reply */
3503         reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
3504             & MPI2_DOORBELL_DATA_MASK);
3505         writel(0, &ioc->chip->HostInterruptStatus);
3506         if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
3507                 pr_err(MPT3SAS_FMT
3508                         "doorbell handshake int failed (line=%d)\n",
3509                         ioc->name, __LINE__);
3510                 return -EFAULT;
3511         }
3512         reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
3513             & MPI2_DOORBELL_DATA_MASK);
3514         writel(0, &ioc->chip->HostInterruptStatus);
3515
3516         for (i = 2; i < default_reply->MsgLength * 2; i++)  {
3517                 if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
3518                         pr_err(MPT3SAS_FMT
3519                                 "doorbell handshake int failed (line=%d)\n",
3520                                 ioc->name, __LINE__);
3521                         return -EFAULT;
3522                 }
3523                 if (i >=  reply_bytes/2) /* overflow case */
3524                         dummy = readl(&ioc->chip->Doorbell);
3525                 else
3526                         reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
3527                             & MPI2_DOORBELL_DATA_MASK);
3528                 writel(0, &ioc->chip->HostInterruptStatus);
3529         }
3530
3531         _base_wait_for_doorbell_int(ioc, 5, sleep_flag);
3532         if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
3533                 dhsprintk(ioc, pr_info(MPT3SAS_FMT
3534                         "doorbell is in use (line=%d)\n", ioc->name, __LINE__));
3535         }
3536         writel(0, &ioc->chip->HostInterruptStatus);
3537
3538         if (ioc->logging_level & MPT_DEBUG_INIT) {
3539                 mfp = (__le32 *)reply;
3540                 pr_info("\toffset:data\n");
3541                 for (i = 0; i < reply_bytes/4; i++)
3542                         pr_info("\t[0x%02x]:%08x\n", i*4,
3543                             le32_to_cpu(mfp[i]));
3544         }
3545         return 0;
3546 }
3547
3548 /**
3549  * mpt3sas_base_sas_iounit_control - send sas iounit control to FW
3550  * @ioc: per adapter object
3551  * @mpi_reply: the reply payload from FW
3552  * @mpi_request: the request payload sent to FW
3553  *
3554  * The SAS IO Unit Control Request message allows the host to perform low-level
3555  * operations, such as resets on the PHYs of the IO Unit, also allows the host
3556  * to obtain the IOC assigned device handles for a device if it has other
3557  * identifying information about the device, in addition allows the host to
3558  * remove IOC resources associated with the device.
3559  *
3560  * Returns 0 for success, non-zero for failure.
3561  */
3562 int
3563 mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
3564         Mpi2SasIoUnitControlReply_t *mpi_reply,
3565         Mpi2SasIoUnitControlRequest_t *mpi_request)
3566 {
3567         u16 smid;
3568         u32 ioc_state;
3569         unsigned long timeleft;
3570         bool issue_reset = false;
3571         int rc;
3572         void *request;
3573         u16 wait_state_count;
3574
3575         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
3576             __func__));
3577
3578         mutex_lock(&ioc->base_cmds.mutex);
3579
3580         if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) {
3581                 pr_err(MPT3SAS_FMT "%s: base_cmd in use\n",
3582                     ioc->name, __func__);
3583                 rc = -EAGAIN;
3584                 goto out;
3585         }
3586
3587         wait_state_count = 0;
3588         ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
3589         while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
3590                 if (wait_state_count++ == 10) {
3591                         pr_err(MPT3SAS_FMT
3592                             "%s: failed due to ioc not operational\n",
3593                             ioc->name, __func__);
3594                         rc = -EFAULT;
3595                         goto out;
3596                 }
3597                 ssleep(1);
3598                 ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
3599                 pr_info(MPT3SAS_FMT
3600                         "%s: waiting for operational state(count=%d)\n",
3601                         ioc->name, __func__, wait_state_count);
3602         }
3603
3604         smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
3605         if (!smid) {
3606                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
3607                     ioc->name, __func__);
3608                 rc = -EAGAIN;
3609                 goto out;
3610         }
3611
3612         rc = 0;
3613         ioc->base_cmds.status = MPT3_CMD_PENDING;
3614         request = mpt3sas_base_get_msg_frame(ioc, smid);
3615         ioc->base_cmds.smid = smid;
3616         memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t));
3617         if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
3618             mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
3619                 ioc->ioc_link_reset_in_progress = 1;
3620         init_completion(&ioc->base_cmds.done);
3621         mpt3sas_base_put_smid_default(ioc, smid);
3622         timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
3623             msecs_to_jiffies(10000));
3624         if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
3625             mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
3626             ioc->ioc_link_reset_in_progress)
3627                 ioc->ioc_link_reset_in_progress = 0;
3628         if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
3629                 pr_err(MPT3SAS_FMT "%s: timeout\n",
3630                     ioc->name, __func__);
3631                 _debug_dump_mf(mpi_request,
3632                     sizeof(Mpi2SasIoUnitControlRequest_t)/4);
3633                 if (!(ioc->base_cmds.status & MPT3_CMD_RESET))
3634                         issue_reset = true;
3635                 goto issue_host_reset;
3636         }
3637         if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
3638                 memcpy(mpi_reply, ioc->base_cmds.reply,
3639                     sizeof(Mpi2SasIoUnitControlReply_t));
3640         else
3641                 memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t));
3642         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
3643         goto out;
3644
3645  issue_host_reset:
3646         if (issue_reset)
3647                 mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
3648                     FORCE_BIG_HAMMER);
3649         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
3650         rc = -EFAULT;
3651  out:
3652         mutex_unlock(&ioc->base_cmds.mutex);
3653         return rc;
3654 }
3655
3656 /**
3657  * mpt3sas_base_scsi_enclosure_processor - sending request to sep device
3658  * @ioc: per adapter object
3659  * @mpi_reply: the reply payload from FW
3660  * @mpi_request: the request payload sent to FW
3661  *
3662  * The SCSI Enclosure Processor request message causes the IOC to
3663  * communicate with SES devices to control LED status signals.
3664  *
3665  * Returns 0 for success, non-zero for failure.
3666  */
3667 int
3668 mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
3669         Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request)
3670 {
3671         u16 smid;
3672         u32 ioc_state;
3673         unsigned long timeleft;
3674         bool issue_reset = false;
3675         int rc;
3676         void *request;
3677         u16 wait_state_count;
3678
3679         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
3680             __func__));
3681
3682         mutex_lock(&ioc->base_cmds.mutex);
3683
3684         if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) {
3685                 pr_err(MPT3SAS_FMT "%s: base_cmd in use\n",
3686                     ioc->name, __func__);
3687                 rc = -EAGAIN;
3688                 goto out;
3689         }
3690
3691         wait_state_count = 0;
3692         ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
3693         while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
3694                 if (wait_state_count++ == 10) {
3695                         pr_err(MPT3SAS_FMT
3696                             "%s: failed due to ioc not operational\n",
3697                             ioc->name, __func__);
3698                         rc = -EFAULT;
3699                         goto out;
3700                 }
3701                 ssleep(1);
3702                 ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
3703                 pr_info(MPT3SAS_FMT
3704                         "%s: waiting for operational state(count=%d)\n",
3705                         ioc->name,
3706                     __func__, wait_state_count);
3707         }
3708
3709         smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
3710         if (!smid) {
3711                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
3712                     ioc->name, __func__);
3713                 rc = -EAGAIN;
3714                 goto out;
3715         }
3716
3717         rc = 0;
3718         ioc->base_cmds.status = MPT3_CMD_PENDING;
3719         request = mpt3sas_base_get_msg_frame(ioc, smid);
3720         ioc->base_cmds.smid = smid;
3721         memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
3722         init_completion(&ioc->base_cmds.done);
3723         mpt3sas_base_put_smid_default(ioc, smid);
3724         timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
3725             msecs_to_jiffies(10000));
3726         if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
3727                 pr_err(MPT3SAS_FMT "%s: timeout\n",
3728                     ioc->name, __func__);
3729                 _debug_dump_mf(mpi_request,
3730                     sizeof(Mpi2SepRequest_t)/4);
3731                 if (!(ioc->base_cmds.status & MPT3_CMD_RESET))
3732                         issue_reset = false;
3733                 goto issue_host_reset;
3734         }
3735         if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
3736                 memcpy(mpi_reply, ioc->base_cmds.reply,
3737                     sizeof(Mpi2SepReply_t));
3738         else
3739                 memset(mpi_reply, 0, sizeof(Mpi2SepReply_t));
3740         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
3741         goto out;
3742
3743  issue_host_reset:
3744         if (issue_reset)
3745                 mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
3746                     FORCE_BIG_HAMMER);
3747         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
3748         rc = -EFAULT;
3749  out:
3750         mutex_unlock(&ioc->base_cmds.mutex);
3751         return rc;
3752 }
3753
3754 /**
3755  * _base_get_port_facts - obtain port facts reply and save in ioc
3756  * @ioc: per adapter object
3757  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3758  *
3759  * Returns 0 for success, non-zero for failure.
3760  */
3761 static int
3762 _base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
3763 {
3764         Mpi2PortFactsRequest_t mpi_request;
3765         Mpi2PortFactsReply_t mpi_reply;
3766         struct mpt3sas_port_facts *pfacts;
3767         int mpi_reply_sz, mpi_request_sz, r;
3768
3769         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
3770             __func__));
3771
3772         mpi_reply_sz = sizeof(Mpi2PortFactsReply_t);
3773         mpi_request_sz = sizeof(Mpi2PortFactsRequest_t);
3774         memset(&mpi_request, 0, mpi_request_sz);
3775         mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
3776         mpi_request.PortNumber = port;
3777         r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
3778             (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
3779
3780         if (r != 0) {
3781                 pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
3782                     ioc->name, __func__, r);
3783                 return r;
3784         }
3785
3786         pfacts = &ioc->pfacts[port];
3787         memset(pfacts, 0, sizeof(struct mpt3sas_port_facts));
3788         pfacts->PortNumber = mpi_reply.PortNumber;
3789         pfacts->VP_ID = mpi_reply.VP_ID;
3790         pfacts->VF_ID = mpi_reply.VF_ID;
3791         pfacts->MaxPostedCmdBuffers =
3792             le16_to_cpu(mpi_reply.MaxPostedCmdBuffers);
3793
3794         return 0;
3795 }
3796
3797 /**
3798  * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
3799  * @ioc: per adapter object
3800  * @timeout:
3801  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3802  *
3803  * Returns 0 for success, non-zero for failure.
3804  */
3805 static int
3806 _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout,
3807         int sleep_flag)
3808 {
3809         u32 ioc_state;
3810         int rc;
3811
3812         dinitprintk(ioc, printk(MPT3SAS_FMT "%s\n", ioc->name,
3813             __func__));
3814
3815         if (ioc->pci_error_recovery) {
3816                 dfailprintk(ioc, printk(MPT3SAS_FMT
3817                     "%s: host in pci error recovery\n", ioc->name, __func__));
3818                 return -EFAULT;
3819         }
3820
3821         ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
3822         dhsprintk(ioc, printk(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
3823             ioc->name, __func__, ioc_state));
3824
3825         if (((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) ||
3826             (ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
3827                 return 0;
3828
3829         if (ioc_state & MPI2_DOORBELL_USED) {
3830                 dhsprintk(ioc, printk(MPT3SAS_FMT
3831                     "unexpected doorbell active!\n", ioc->name));
3832                 goto issue_diag_reset;
3833         }
3834
3835         if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
3836                 mpt3sas_base_fault_info(ioc, ioc_state &
3837                     MPI2_DOORBELL_DATA_MASK);
3838                 goto issue_diag_reset;
3839         }
3840
3841         ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
3842             timeout, sleep_flag);
3843         if (ioc_state) {
3844                 dfailprintk(ioc, printk(MPT3SAS_FMT
3845                     "%s: failed going to ready state (ioc_state=0x%x)\n",
3846                     ioc->name, __func__, ioc_state));
3847                 return -EFAULT;
3848         }
3849
3850  issue_diag_reset:
3851         rc = _base_diag_reset(ioc, sleep_flag);
3852         return rc;
3853 }
3854
3855 /**
3856  * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
3857  * @ioc: per adapter object
3858  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3859  *
3860  * Returns 0 for success, non-zero for failure.
3861  */
3862 static int
3863 _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
3864 {
3865         Mpi2IOCFactsRequest_t mpi_request;
3866         Mpi2IOCFactsReply_t mpi_reply;
3867         struct mpt3sas_facts *facts;
3868         int mpi_reply_sz, mpi_request_sz, r;
3869
3870         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
3871             __func__));
3872
3873         r = _base_wait_for_iocstate(ioc, 10, sleep_flag);
3874         if (r) {
3875                 dfailprintk(ioc, printk(MPT3SAS_FMT
3876                     "%s: failed getting to correct state\n",
3877                     ioc->name, __func__));
3878                 return r;
3879         }
3880         mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
3881         mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
3882         memset(&mpi_request, 0, mpi_request_sz);
3883         mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
3884         r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
3885             (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
3886
3887         if (r != 0) {
3888                 pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
3889                     ioc->name, __func__, r);
3890                 return r;
3891         }
3892
3893         facts = &ioc->facts;
3894         memset(facts, 0, sizeof(struct mpt3sas_facts));
3895         facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
3896         facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
3897         facts->VP_ID = mpi_reply.VP_ID;
3898         facts->VF_ID = mpi_reply.VF_ID;
3899         facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
3900         facts->MaxChainDepth = mpi_reply.MaxChainDepth;
3901         facts->WhoInit = mpi_reply.WhoInit;
3902         facts->NumberOfPorts = mpi_reply.NumberOfPorts;
3903         facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors;
3904         facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
3905         facts->MaxReplyDescriptorPostQueueDepth =
3906             le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
3907         facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
3908         facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
3909         if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
3910                 ioc->ir_firmware = 1;
3911         if ((facts->IOCCapabilities &
3912               MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE))
3913                 ioc->rdpq_array_capable = 1;
3914         facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
3915         facts->IOCRequestFrameSize =
3916             le16_to_cpu(mpi_reply.IOCRequestFrameSize);
3917         facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
3918         facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
3919         ioc->shost->max_id = -1;
3920         facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
3921         facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
3922         facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
3923         facts->HighPriorityCredit =
3924             le16_to_cpu(mpi_reply.HighPriorityCredit);
3925         facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
3926         facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
3927
3928         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3929                 "hba queue depth(%d), max chains per io(%d)\n",
3930                 ioc->name, facts->RequestCredit,
3931             facts->MaxChainDepth));
3932         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3933                 "request frame size(%d), reply frame size(%d)\n", ioc->name,
3934             facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4));
3935         return 0;
3936 }
3937
3938 /**
3939  * _base_send_ioc_init - send ioc_init to firmware
3940  * @ioc: per adapter object
3941  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3942  *
3943  * Returns 0 for success, non-zero for failure.
3944  */
3945 static int
3946 _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
3947 {
3948         Mpi2IOCInitRequest_t mpi_request;
3949         Mpi2IOCInitReply_t mpi_reply;
3950         int i, r = 0;
3951         struct timeval current_time;
3952         u16 ioc_status;
3953         u32 reply_post_free_array_sz = 0;
3954         Mpi2IOCInitRDPQArrayEntry *reply_post_free_array = NULL;
3955         dma_addr_t reply_post_free_array_dma;
3956
3957         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
3958             __func__));
3959
3960         memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
3961         mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
3962         mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
3963         mpi_request.VF_ID = 0; /* TODO */
3964         mpi_request.VP_ID = 0;
3965         mpi_request.MsgVersion = cpu_to_le16(MPI25_VERSION);
3966         mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
3967
3968         if (_base_is_controller_msix_enabled(ioc))
3969                 mpi_request.HostMSIxVectors = ioc->reply_queue_count;
3970         mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
3971         mpi_request.ReplyDescriptorPostQueueDepth =
3972             cpu_to_le16(ioc->reply_post_queue_depth);
3973         mpi_request.ReplyFreeQueueDepth =
3974             cpu_to_le16(ioc->reply_free_queue_depth);
3975
3976         mpi_request.SenseBufferAddressHigh =
3977             cpu_to_le32((u64)ioc->sense_dma >> 32);
3978         mpi_request.SystemReplyAddressHigh =
3979             cpu_to_le32((u64)ioc->reply_dma >> 32);
3980         mpi_request.SystemRequestFrameBaseAddress =
3981             cpu_to_le64((u64)ioc->request_dma);
3982         mpi_request.ReplyFreeQueueAddress =
3983             cpu_to_le64((u64)ioc->reply_free_dma);
3984
3985         if (ioc->rdpq_array_enable) {
3986                 reply_post_free_array_sz = ioc->reply_queue_count *
3987                     sizeof(Mpi2IOCInitRDPQArrayEntry);
3988                 reply_post_free_array = pci_alloc_consistent(ioc->pdev,
3989                         reply_post_free_array_sz, &reply_post_free_array_dma);
3990                 if (!reply_post_free_array) {
3991                         pr_err(MPT3SAS_FMT
3992                         "reply_post_free_array: pci_alloc_consistent failed\n",
3993                         ioc->name);
3994                         r = -ENOMEM;
3995                         goto out;
3996                 }
3997                 memset(reply_post_free_array, 0, reply_post_free_array_sz);
3998                 for (i = 0; i < ioc->reply_queue_count; i++)
3999                         reply_post_free_array[i].RDPQBaseAddress =
4000                             cpu_to_le64(
4001                                 (u64)ioc->reply_post[i].reply_post_free_dma);
4002                 mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE;
4003                 mpi_request.ReplyDescriptorPostQueueAddress =
4004                     cpu_to_le64((u64)reply_post_free_array_dma);
4005         } else {
4006                 mpi_request.ReplyDescriptorPostQueueAddress =
4007                     cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma);
4008         }
4009
4010         /* This time stamp specifies number of milliseconds
4011          * since epoch ~ midnight January 1, 1970.
4012          */
4013         do_gettimeofday(&current_time);
4014         mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 +
4015             (current_time.tv_usec / 1000));
4016
4017         if (ioc->logging_level & MPT_DEBUG_INIT) {
4018                 __le32 *mfp;
4019                 int i;
4020
4021                 mfp = (__le32 *)&mpi_request;
4022                 pr_info("\toffset:data\n");
4023                 for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
4024                         pr_info("\t[0x%02x]:%08x\n", i*4,
4025                             le32_to_cpu(mfp[i]));
4026         }
4027
4028         r = _base_handshake_req_reply_wait(ioc,
4029             sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
4030             sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10,
4031             sleep_flag);
4032
4033         if (r != 0) {
4034                 pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
4035                     ioc->name, __func__, r);
4036                 goto out;
4037         }
4038
4039         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
4040         if (ioc_status != MPI2_IOCSTATUS_SUCCESS ||
4041             mpi_reply.IOCLogInfo) {
4042                 pr_err(MPT3SAS_FMT "%s: failed\n", ioc->name, __func__);
4043                 r = -EIO;
4044         }
4045
4046 out:
4047         if (reply_post_free_array)
4048                 pci_free_consistent(ioc->pdev, reply_post_free_array_sz,
4049                                     reply_post_free_array,
4050                                     reply_post_free_array_dma);
4051         return r;
4052 }
4053
4054 /**
4055  * mpt3sas_port_enable_done - command completion routine for port enable
4056  * @ioc: per adapter object
4057  * @smid: system request message index
4058  * @msix_index: MSIX table index supplied by the OS
4059  * @reply: reply message frame(lower 32bit addr)
4060  *
4061  * Return 1 meaning mf should be freed from _base_interrupt
4062  *        0 means the mf is freed from this function.
4063  */
4064 u8
4065 mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
4066         u32 reply)
4067 {
4068         MPI2DefaultReply_t *mpi_reply;
4069         u16 ioc_status;
4070
4071         if (ioc->port_enable_cmds.status == MPT3_CMD_NOT_USED)
4072                 return 1;
4073
4074         mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
4075         if (!mpi_reply)
4076                 return 1;
4077
4078         if (mpi_reply->Function != MPI2_FUNCTION_PORT_ENABLE)
4079                 return 1;
4080
4081         ioc->port_enable_cmds.status &= ~MPT3_CMD_PENDING;
4082         ioc->port_enable_cmds.status |= MPT3_CMD_COMPLETE;
4083         ioc->port_enable_cmds.status |= MPT3_CMD_REPLY_VALID;
4084         memcpy(ioc->port_enable_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
4085         ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
4086         if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
4087                 ioc->port_enable_failed = 1;
4088
4089         if (ioc->is_driver_loading) {
4090                 if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
4091                         mpt3sas_port_enable_complete(ioc);
4092                         return 1;
4093                 } else {
4094                         ioc->start_scan_failed = ioc_status;
4095                         ioc->start_scan = 0;
4096                         return 1;
4097                 }
4098         }
4099         complete(&ioc->port_enable_cmds.done);
4100         return 1;
4101 }
4102
4103 /**
4104  * _base_send_port_enable - send port_enable(discovery stuff) to firmware
4105  * @ioc: per adapter object
4106  * @sleep_flag: CAN_SLEEP or NO_SLEEP
4107  *
4108  * Returns 0 for success, non-zero for failure.
4109  */
4110 static int
4111 _base_send_port_enable(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
4112 {
4113         Mpi2PortEnableRequest_t *mpi_request;
4114         Mpi2PortEnableReply_t *mpi_reply;
4115         unsigned long timeleft;
4116         int r = 0;
4117         u16 smid;
4118         u16 ioc_status;
4119
4120         pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name);
4121
4122         if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
4123                 pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
4124                     ioc->name, __func__);
4125                 return -EAGAIN;
4126         }
4127
4128         smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
4129         if (!smid) {
4130                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
4131                     ioc->name, __func__);
4132                 return -EAGAIN;
4133         }
4134
4135         ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
4136         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
4137         ioc->port_enable_cmds.smid = smid;
4138         memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
4139         mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
4140
4141         init_completion(&ioc->port_enable_cmds.done);
4142         mpt3sas_base_put_smid_default(ioc, smid);
4143         timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
4144             300*HZ);
4145         if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) {
4146                 pr_err(MPT3SAS_FMT "%s: timeout\n",
4147                     ioc->name, __func__);
4148                 _debug_dump_mf(mpi_request,
4149                     sizeof(Mpi2PortEnableRequest_t)/4);
4150                 if (ioc->port_enable_cmds.status & MPT3_CMD_RESET)
4151                         r = -EFAULT;
4152                 else
4153                         r = -ETIME;
4154                 goto out;
4155         }
4156
4157         mpi_reply = ioc->port_enable_cmds.reply;
4158         ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
4159         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4160                 pr_err(MPT3SAS_FMT "%s: failed with (ioc_status=0x%08x)\n",
4161                     ioc->name, __func__, ioc_status);
4162                 r = -EFAULT;
4163                 goto out;
4164         }
4165
4166  out:
4167         ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
4168         pr_info(MPT3SAS_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
4169             "SUCCESS" : "FAILED"));
4170         return r;
4171 }
4172
4173 /**
4174  * mpt3sas_port_enable - initiate firmware discovery (don't wait for reply)
4175  * @ioc: per adapter object
4176  *
4177  * Returns 0 for success, non-zero for failure.
4178  */
4179 int
4180 mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc)
4181 {
4182         Mpi2PortEnableRequest_t *mpi_request;
4183         u16 smid;
4184
4185         pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name);
4186
4187         if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
4188                 pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
4189                     ioc->name, __func__);
4190                 return -EAGAIN;
4191         }
4192
4193         smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
4194         if (!smid) {
4195                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
4196                     ioc->name, __func__);
4197                 return -EAGAIN;
4198         }
4199
4200         ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
4201         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
4202         ioc->port_enable_cmds.smid = smid;
4203         memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
4204         mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
4205
4206         mpt3sas_base_put_smid_default(ioc, smid);
4207         return 0;
4208 }
4209
4210 /**
4211  * _base_determine_wait_on_discovery - desposition
4212  * @ioc: per adapter object
4213  *
4214  * Decide whether to wait on discovery to complete. Used to either
4215  * locate boot device, or report volumes ahead of physical devices.
4216  *
4217  * Returns 1 for wait, 0 for don't wait
4218  */
4219 static int
4220 _base_determine_wait_on_discovery(struct MPT3SAS_ADAPTER *ioc)
4221 {
4222         /* We wait for discovery to complete if IR firmware is loaded.
4223          * The sas topology events arrive before PD events, so we need time to
4224          * turn on the bit in ioc->pd_handles to indicate PD
4225          * Also, it maybe required to report Volumes ahead of physical
4226          * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
4227          */
4228         if (ioc->ir_firmware)
4229                 return 1;
4230
4231         /* if no Bios, then we don't need to wait */
4232         if (!ioc->bios_pg3.BiosVersion)
4233                 return 0;
4234
4235         /* Bios is present, then we drop down here.
4236          *
4237          * If there any entries in the Bios Page 2, then we wait
4238          * for discovery to complete.
4239          */
4240
4241         /* Current Boot Device */
4242         if ((ioc->bios_pg2.CurrentBootDeviceForm &
4243             MPI2_BIOSPAGE2_FORM_MASK) ==
4244             MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
4245         /* Request Boot Device */
4246            (ioc->bios_pg2.ReqBootDeviceForm &
4247             MPI2_BIOSPAGE2_FORM_MASK) ==
4248             MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
4249         /* Alternate Request Boot Device */
4250            (ioc->bios_pg2.ReqAltBootDeviceForm &
4251             MPI2_BIOSPAGE2_FORM_MASK) ==
4252             MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
4253                 return 0;
4254
4255         return 1;
4256 }
4257
4258 /**
4259  * _base_unmask_events - turn on notification for this event
4260  * @ioc: per adapter object
4261  * @event: firmware event
4262  *
4263  * The mask is stored in ioc->event_masks.
4264  */
4265 static void
4266 _base_unmask_events(struct MPT3SAS_ADAPTER *ioc, u16 event)
4267 {
4268         u32 desired_event;
4269
4270         if (event >= 128)
4271                 return;
4272
4273         desired_event = (1 << (event % 32));
4274
4275         if (event < 32)
4276                 ioc->event_masks[0] &= ~desired_event;
4277         else if (event < 64)
4278                 ioc->event_masks[1] &= ~desired_event;
4279         else if (event < 96)
4280                 ioc->event_masks[2] &= ~desired_event;
4281         else if (event < 128)
4282                 ioc->event_masks[3] &= ~desired_event;
4283 }
4284
4285 /**
4286  * _base_event_notification - send event notification
4287  * @ioc: per adapter object
4288  * @sleep_flag: CAN_SLEEP or NO_SLEEP
4289  *
4290  * Returns 0 for success, non-zero for failure.
4291  */
4292 static int
4293 _base_event_notification(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
4294 {
4295         Mpi2EventNotificationRequest_t *mpi_request;
4296         unsigned long timeleft;
4297         u16 smid;
4298         int r = 0;
4299         int i;
4300
4301         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
4302             __func__));
4303
4304         if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
4305                 pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
4306                     ioc->name, __func__);
4307                 return -EAGAIN;
4308         }
4309
4310         smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
4311         if (!smid) {
4312                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
4313                     ioc->name, __func__);
4314                 return -EAGAIN;
4315         }
4316         ioc->base_cmds.status = MPT3_CMD_PENDING;
4317         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
4318         ioc->base_cmds.smid = smid;
4319         memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
4320         mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
4321         mpi_request->VF_ID = 0; /* TODO */
4322         mpi_request->VP_ID = 0;
4323         for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
4324                 mpi_request->EventMasks[i] =
4325                     cpu_to_le32(ioc->event_masks[i]);
4326         init_completion(&ioc->base_cmds.done);
4327         mpt3sas_base_put_smid_default(ioc, smid);
4328         timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
4329         if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
4330                 pr_err(MPT3SAS_FMT "%s: timeout\n",
4331                     ioc->name, __func__);
4332                 _debug_dump_mf(mpi_request,
4333                     sizeof(Mpi2EventNotificationRequest_t)/4);
4334                 if (ioc->base_cmds.status & MPT3_CMD_RESET)
4335                         r = -EFAULT;
4336                 else
4337                         r = -ETIME;
4338         } else
4339                 dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s: complete\n",
4340                     ioc->name, __func__));
4341         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
4342         return r;
4343 }
4344
4345 /**
4346  * mpt3sas_base_validate_event_type - validating event types
4347  * @ioc: per adapter object
4348  * @event: firmware event
4349  *
4350  * This will turn on firmware event notification when application
4351  * ask for that event. We don't mask events that are already enabled.
4352  */
4353 void
4354 mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type)
4355 {
4356         int i, j;
4357         u32 event_mask, desired_event;
4358         u8 send_update_to_fw;
4359
4360         for (i = 0, send_update_to_fw = 0; i <
4361             MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) {
4362                 event_mask = ~event_type[i];
4363                 desired_event = 1;
4364                 for (j = 0; j < 32; j++) {
4365                         if (!(event_mask & desired_event) &&
4366                             (ioc->event_masks[i] & desired_event)) {
4367                                 ioc->event_masks[i] &= ~desired_event;
4368                                 send_update_to_fw = 1;
4369                         }
4370                         desired_event = (desired_event << 1);
4371                 }
4372         }
4373
4374         if (!send_update_to_fw)
4375                 return;
4376
4377         mutex_lock(&ioc->base_cmds.mutex);
4378         _base_event_notification(ioc, CAN_SLEEP);
4379         mutex_unlock(&ioc->base_cmds.mutex);
4380 }
4381
4382 /**
4383  * _base_diag_reset - the "big hammer" start of day reset
4384  * @ioc: per adapter object
4385  * @sleep_flag: CAN_SLEEP or NO_SLEEP
4386  *
4387  * Returns 0 for success, non-zero for failure.
4388  */
4389 static int
4390 _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
4391 {
4392         u32 host_diagnostic;
4393         u32 ioc_state;
4394         u32 count;
4395         u32 hcb_size;
4396
4397         pr_info(MPT3SAS_FMT "sending diag reset !!\n", ioc->name);
4398
4399         drsprintk(ioc, pr_info(MPT3SAS_FMT "clear interrupts\n",
4400             ioc->name));
4401
4402         count = 0;
4403         do {
4404                 /* Write magic sequence to WriteSequence register
4405                  * Loop until in diagnostic mode
4406                  */
4407                 drsprintk(ioc, pr_info(MPT3SAS_FMT
4408                         "write magic sequence\n", ioc->name));
4409                 writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
4410                 writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence);
4411                 writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence);
4412                 writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence);
4413                 writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence);
4414                 writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence);
4415                 writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);
4416
4417                 /* wait 100 msec */
4418                 if (sleep_flag == CAN_SLEEP)
4419                         msleep(100);
4420                 else
4421                         mdelay(100);
4422
4423                 if (count++ > 20)
4424                         goto out;
4425
4426                 host_diagnostic = readl(&ioc->chip->HostDiagnostic);
4427                 drsprintk(ioc, pr_info(MPT3SAS_FMT
4428                         "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n",
4429                     ioc->name, count, host_diagnostic));
4430
4431         } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
4432
4433         hcb_size = readl(&ioc->chip->HCBSize);
4434
4435         drsprintk(ioc, pr_info(MPT3SAS_FMT "diag reset: issued\n",
4436             ioc->name));
4437         writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
4438              &ioc->chip->HostDiagnostic);
4439
4440         /*This delay allows the chip PCIe hardware time to finish reset tasks*/
4441         if (sleep_flag == CAN_SLEEP)
4442                 msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
4443         else
4444                 mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
4445
4446         /* Approximately 300 second max wait */
4447         for (count = 0; count < (300000000 /
4448                 MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
4449
4450                 host_diagnostic = readl(&ioc->chip->HostDiagnostic);
4451
4452                 if (host_diagnostic == 0xFFFFFFFF)
4453                         goto out;
4454                 if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
4455                         break;
4456
4457                 /* Wait to pass the second read delay window */
4458                 if (sleep_flag == CAN_SLEEP)
4459                         msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
4460                                                                 / 1000);
4461                 else
4462                         mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
4463                                                                 / 1000);
4464         }
4465
4466         if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
4467
4468                 drsprintk(ioc, pr_info(MPT3SAS_FMT
4469                 "restart the adapter assuming the HCB Address points to good F/W\n",
4470                     ioc->name));
4471                 host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
4472                 host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
4473                 writel(host_diagnostic, &ioc->chip->HostDiagnostic);
4474
4475                 drsprintk(ioc, pr_info(MPT3SAS_FMT
4476                     "re-enable the HCDW\n", ioc->name));
4477                 writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE,
4478                     &ioc->chip->HCBSize);
4479         }
4480
4481         drsprintk(ioc, pr_info(MPT3SAS_FMT "restart the adapter\n",
4482             ioc->name));
4483         writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
4484             &ioc->chip->HostDiagnostic);
4485
4486         drsprintk(ioc, pr_info(MPT3SAS_FMT
4487                 "disable writes to the diagnostic register\n", ioc->name));
4488         writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
4489
4490         drsprintk(ioc, pr_info(MPT3SAS_FMT
4491                 "Wait for FW to go to the READY state\n", ioc->name));
4492         ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20,
4493             sleep_flag);
4494         if (ioc_state) {
4495                 pr_err(MPT3SAS_FMT
4496                         "%s: failed going to ready state (ioc_state=0x%x)\n",
4497                         ioc->name, __func__, ioc_state);
4498                 goto out;
4499         }
4500
4501         pr_info(MPT3SAS_FMT "diag reset: SUCCESS\n", ioc->name);
4502         return 0;
4503
4504  out:
4505         pr_err(MPT3SAS_FMT "diag reset: FAILED\n", ioc->name);
4506         return -EFAULT;
4507 }
4508
4509 /**
4510  * _base_make_ioc_ready - put controller in READY state
4511  * @ioc: per adapter object
4512  * @sleep_flag: CAN_SLEEP or NO_SLEEP
4513  * @type: FORCE_BIG_HAMMER or SOFT_RESET
4514  *
4515  * Returns 0 for success, non-zero for failure.
4516  */
4517 static int
4518 _base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
4519         enum reset_type type)
4520 {
4521         u32 ioc_state;
4522         int rc;
4523         int count;
4524
4525         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
4526             __func__));
4527
4528         if (ioc->pci_error_recovery)
4529                 return 0;
4530
4531         ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
4532         dhsprintk(ioc, pr_info(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
4533             ioc->name, __func__, ioc_state));
4534
4535         /* if in RESET state, it should move to READY state shortly */
4536         count = 0;
4537         if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_RESET) {
4538                 while ((ioc_state & MPI2_IOC_STATE_MASK) !=
4539                     MPI2_IOC_STATE_READY) {
4540                         if (count++ == 10) {
4541                                 pr_err(MPT3SAS_FMT
4542                                         "%s: failed going to ready state (ioc_state=0x%x)\n",
4543                                     ioc->name, __func__, ioc_state);
4544                                 return -EFAULT;
4545                         }
4546                         if (sleep_flag == CAN_SLEEP)
4547                                 ssleep(1);
4548                         else
4549                                 mdelay(1000);
4550                         ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
4551                 }
4552         }
4553
4554         if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY)
4555                 return 0;
4556
4557         if (ioc_state & MPI2_DOORBELL_USED) {
4558                 dhsprintk(ioc, pr_info(MPT3SAS_FMT
4559                         "unexpected doorbell active!\n",
4560                         ioc->name));
4561                 goto issue_diag_reset;
4562         }
4563
4564         if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
4565                 mpt3sas_base_fault_info(ioc, ioc_state &
4566                     MPI2_DOORBELL_DATA_MASK);
4567                 goto issue_diag_reset;
4568         }
4569
4570         if (type == FORCE_BIG_HAMMER)
4571                 goto issue_diag_reset;
4572
4573         if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
4574                 if (!(_base_send_ioc_reset(ioc,
4575                     MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) {
4576                         return 0;
4577         }
4578
4579  issue_diag_reset:
4580         rc = _base_diag_reset(ioc, CAN_SLEEP);
4581         return rc;
4582 }
4583
4584 /**
4585  * _base_make_ioc_operational - put controller in OPERATIONAL state
4586  * @ioc: per adapter object
4587  * @sleep_flag: CAN_SLEEP or NO_SLEEP
4588  *
4589  * Returns 0 for success, non-zero for failure.
4590  */
4591 static int
4592 _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
4593 {
4594         int r, i;
4595         unsigned long   flags;
4596         u32 reply_address;
4597         u16 smid;
4598         struct _tr_list *delayed_tr, *delayed_tr_next;
4599         struct adapter_reply_queue *reply_q;
4600         long reply_post_free;
4601         u32 reply_post_free_sz, index = 0;
4602
4603         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
4604             __func__));
4605
4606         /* clean the delayed target reset list */
4607         list_for_each_entry_safe(delayed_tr, delayed_tr_next,
4608             &ioc->delayed_tr_list, list) {
4609                 list_del(&delayed_tr->list);
4610                 kfree(delayed_tr);
4611         }
4612
4613
4614         list_for_each_entry_safe(delayed_tr, delayed_tr_next,
4615             &ioc->delayed_tr_volume_list, list) {
4616                 list_del(&delayed_tr->list);
4617                 kfree(delayed_tr);
4618         }
4619
4620         /* initialize the scsi lookup free list */
4621         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
4622         INIT_LIST_HEAD(&ioc->free_list);
4623         smid = 1;
4624         for (i = 0; i < ioc->scsiio_depth; i++, smid++) {
4625                 INIT_LIST_HEAD(&ioc->scsi_lookup[i].chain_list);
4626                 ioc->scsi_lookup[i].cb_idx = 0xFF;
4627                 ioc->scsi_lookup[i].smid = smid;
4628                 ioc->scsi_lookup[i].scmd = NULL;
4629                 list_add_tail(&ioc->scsi_lookup[i].tracker_list,
4630                     &ioc->free_list);
4631         }
4632
4633         /* hi-priority queue */
4634         INIT_LIST_HEAD(&ioc->hpr_free_list);
4635         smid = ioc->hi_priority_smid;
4636         for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
4637                 ioc->hpr_lookup[i].cb_idx = 0xFF;
4638                 ioc->hpr_lookup[i].smid = smid;
4639                 list_add_tail(&ioc->hpr_lookup[i].tracker_list,
4640                     &ioc->hpr_free_list);
4641         }
4642
4643         /* internal queue */
4644         INIT_LIST_HEAD(&ioc->internal_free_list);
4645         smid = ioc->internal_smid;
4646         for (i = 0; i < ioc->internal_depth; i++, smid++) {
4647                 ioc->internal_lookup[i].cb_idx = 0xFF;
4648                 ioc->internal_lookup[i].smid = smid;
4649                 list_add_tail(&ioc->internal_lookup[i].tracker_list,
4650                     &ioc->internal_free_list);
4651         }
4652
4653         /* chain pool */
4654         INIT_LIST_HEAD(&ioc->free_chain_list);
4655         for (i = 0; i < ioc->chain_depth; i++)
4656                 list_add_tail(&ioc->chain_lookup[i].tracker_list,
4657                     &ioc->free_chain_list);
4658
4659         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
4660
4661         /* initialize Reply Free Queue */
4662         for (i = 0, reply_address = (u32)ioc->reply_dma ;
4663             i < ioc->reply_free_queue_depth ; i++, reply_address +=
4664             ioc->reply_sz)
4665                 ioc->reply_free[i] = cpu_to_le32(reply_address);
4666
4667         /* initialize reply queues */
4668         if (ioc->is_driver_loading)
4669                 _base_assign_reply_queues(ioc);
4670
4671         /* initialize Reply Post Free Queue */
4672         reply_post_free_sz = ioc->reply_post_queue_depth *
4673             sizeof(Mpi2DefaultReplyDescriptor_t);
4674         reply_post_free = (long)ioc->reply_post[index].reply_post_free;
4675         list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
4676                 reply_q->reply_post_host_index = 0;
4677                 reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *)
4678                     reply_post_free;
4679                 for (i = 0; i < ioc->reply_post_queue_depth; i++)
4680                         reply_q->reply_post_free[i].Words =
4681                             cpu_to_le64(ULLONG_MAX);
4682                 if (!_base_is_controller_msix_enabled(ioc))
4683                         goto skip_init_reply_post_free_queue;
4684                 /*
4685                  * If RDPQ is enabled, switch to the next allocation.
4686                  * Otherwise advance within the contiguous region.
4687                  */
4688                 if (ioc->rdpq_array_enable)
4689                         reply_post_free = (long)
4690                             ioc->reply_post[++index].reply_post_free;
4691                 else
4692                         reply_post_free += reply_post_free_sz;
4693         }
4694  skip_init_reply_post_free_queue:
4695
4696         r = _base_send_ioc_init(ioc, sleep_flag);
4697         if (r)
4698                 return r;
4699
4700         /* initialize reply free host index */
4701         ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
4702         writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex);
4703
4704         /* initialize reply post host index */
4705         list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
4706                 if (ioc->msix96_vector)
4707                         writel((reply_q->msix_index & 7)<<
4708                            MPI2_RPHI_MSIX_INDEX_SHIFT,
4709                            ioc->replyPostRegisterIndex[reply_q->msix_index/8]);
4710                 else
4711                         writel(reply_q->msix_index <<
4712                                 MPI2_RPHI_MSIX_INDEX_SHIFT,
4713                                 &ioc->chip->ReplyPostHostIndex);
4714
4715                 if (!_base_is_controller_msix_enabled(ioc))
4716                         goto skip_init_reply_post_host_index;
4717         }
4718
4719  skip_init_reply_post_host_index:
4720
4721         _base_unmask_interrupts(ioc);
4722         r = _base_event_notification(ioc, sleep_flag);
4723         if (r)
4724                 return r;
4725
4726         if (sleep_flag == CAN_SLEEP)
4727                 _base_static_config_pages(ioc);
4728
4729
4730         if (ioc->is_driver_loading) {
4731                 ioc->wait_for_discovery_to_complete =
4732                     _base_determine_wait_on_discovery(ioc);
4733
4734                 return r; /* scan_start and scan_finished support */
4735         }
4736
4737         r = _base_send_port_enable(ioc, sleep_flag);
4738         if (r)
4739                 return r;
4740
4741         return r;
4742 }
4743
4744 /**
4745  * mpt3sas_base_free_resources - free resources controller resources
4746  * @ioc: per adapter object
4747  *
4748  * Return nothing.
4749  */
4750 void
4751 mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
4752 {
4753         dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
4754             __func__));
4755
4756         if (ioc->chip_phys && ioc->chip) {
4757                 _base_mask_interrupts(ioc);
4758                 ioc->shost_recovery = 1;
4759                 _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
4760                 ioc->shost_recovery = 0;
4761         }
4762
4763         mpt3sas_base_unmap_resources(ioc);
4764         return;
4765 }
4766
4767 /**
4768  * mpt3sas_base_attach - attach controller instance
4769  * @ioc: per adapter object
4770  *
4771  * Returns 0 for success, non-zero for failure.
4772  */
4773 int
4774 mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
4775 {
4776         int r, i;
4777         int cpu_id, last_cpu_id = 0;
4778         u8 revision;
4779
4780         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
4781             __func__));
4782
4783         /* setup cpu_msix_table */
4784         ioc->cpu_count = num_online_cpus();
4785         for_each_online_cpu(cpu_id)
4786                 last_cpu_id = cpu_id;
4787         ioc->cpu_msix_table_sz = last_cpu_id + 1;
4788         ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL);
4789         ioc->reply_queue_count = 1;
4790         if (!ioc->cpu_msix_table) {
4791                 dfailprintk(ioc, pr_info(MPT3SAS_FMT
4792                         "allocation for cpu_msix_table failed!!!\n",
4793                         ioc->name));
4794                 r = -ENOMEM;
4795                 goto out_free_resources;
4796         }
4797
4798         /* Check whether the controller revision is C0 or above.
4799          * only C0 and above revision controllers support 96 MSI-X vectors.
4800          */
4801         revision = ioc->pdev->revision;
4802
4803         if ((ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3004 ||
4804              ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3008 ||
4805              ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_1 ||
4806              ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_2 ||
4807              ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_5 ||
4808              ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_6) &&
4809              (revision >= 0x02))
4810                 ioc->msix96_vector = 1;
4811
4812         ioc->rdpq_array_enable_assigned = 0;
4813         ioc->dma_mask = 0;
4814         r = mpt3sas_base_map_resources(ioc);
4815         if (r)
4816                 goto out_free_resources;
4817
4818
4819         pci_set_drvdata(ioc->pdev, ioc->shost);
4820         r = _base_get_ioc_facts(ioc, CAN_SLEEP);
4821         if (r)
4822                 goto out_free_resources;
4823
4824         /*
4825          * In SAS3.0,
4826          * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
4827          * Target Status - all require the IEEE formated scatter gather
4828          * elements.
4829          */
4830
4831         ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
4832         ioc->build_sg = &_base_build_sg_ieee;
4833         ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
4834         ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
4835
4836         /*
4837          * These function pointers for other requests that don't
4838          * the require IEEE scatter gather elements.
4839          *
4840          * For example Configuration Pages and SAS IOUNIT Control don't.
4841          */
4842         ioc->build_sg_mpi = &_base_build_sg;
4843         ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge;
4844
4845         r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
4846         if (r)
4847                 goto out_free_resources;
4848
4849         ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
4850             sizeof(struct mpt3sas_port_facts), GFP_KERNEL);
4851         if (!ioc->pfacts) {
4852                 r = -ENOMEM;
4853                 goto out_free_resources;
4854         }
4855
4856         for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
4857                 r = _base_get_port_facts(ioc, i, CAN_SLEEP);
4858                 if (r)
4859                         goto out_free_resources;
4860         }
4861
4862         r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
4863         if (r)
4864                 goto out_free_resources;
4865
4866         init_waitqueue_head(&ioc->reset_wq);
4867
4868         /* allocate memory pd handle bitmask list */
4869         ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
4870         if (ioc->facts.MaxDevHandle % 8)
4871                 ioc->pd_handles_sz++;
4872         ioc->pd_handles = kzalloc(ioc->pd_handles_sz,
4873             GFP_KERNEL);
4874         if (!ioc->pd_handles) {
4875                 r = -ENOMEM;
4876                 goto out_free_resources;
4877         }
4878         ioc->blocking_handles = kzalloc(ioc->pd_handles_sz,
4879             GFP_KERNEL);
4880         if (!ioc->blocking_handles) {
4881                 r = -ENOMEM;
4882                 goto out_free_resources;
4883         }
4884
4885         ioc->fwfault_debug = mpt3sas_fwfault_debug;
4886
4887         /* base internal command bits */
4888         mutex_init(&ioc->base_cmds.mutex);
4889         ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4890         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
4891
4892         /* port_enable command bits */
4893         ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4894         ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
4895
4896         /* transport internal command bits */
4897         ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4898         ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
4899         mutex_init(&ioc->transport_cmds.mutex);
4900
4901         /* scsih internal command bits */
4902         ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4903         ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
4904         mutex_init(&ioc->scsih_cmds.mutex);
4905
4906         /* task management internal command bits */
4907         ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4908         ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
4909         mutex_init(&ioc->tm_cmds.mutex);
4910
4911         /* config page internal command bits */
4912         ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4913         ioc->config_cmds.status = MPT3_CMD_NOT_USED;
4914         mutex_init(&ioc->config_cmds.mutex);
4915
4916         /* ctl module internal command bits */
4917         ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4918         ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
4919         ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
4920         mutex_init(&ioc->ctl_cmds.mutex);
4921
4922         if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
4923             !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
4924             !ioc->config_cmds.reply || !ioc->ctl_cmds.reply ||
4925             !ioc->ctl_cmds.sense) {
4926                 r = -ENOMEM;
4927                 goto out_free_resources;
4928         }
4929
4930         for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
4931                 ioc->event_masks[i] = -1;
4932
4933         /* here we enable the events we care about */
4934         _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY);
4935         _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
4936         _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
4937         _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
4938         _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
4939         _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
4940         _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME);
4941         _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
4942         _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
4943         _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
4944         _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
4945
4946         r = _base_make_ioc_operational(ioc, CAN_SLEEP);
4947         if (r)
4948                 goto out_free_resources;
4949
4950         return 0;
4951
4952  out_free_resources:
4953
4954         ioc->remove_host = 1;
4955
4956         mpt3sas_base_free_resources(ioc);
4957         _base_release_memory_pools(ioc);
4958         pci_set_drvdata(ioc->pdev, NULL);
4959         kfree(ioc->cpu_msix_table);
4960         kfree(ioc->pd_handles);
4961         kfree(ioc->blocking_handles);
4962         kfree(ioc->tm_cmds.reply);
4963         kfree(ioc->transport_cmds.reply);
4964         kfree(ioc->scsih_cmds.reply);
4965         kfree(ioc->config_cmds.reply);
4966         kfree(ioc->base_cmds.reply);
4967         kfree(ioc->port_enable_cmds.reply);
4968         kfree(ioc->ctl_cmds.reply);
4969         kfree(ioc->ctl_cmds.sense);
4970         kfree(ioc->pfacts);
4971         ioc->ctl_cmds.reply = NULL;
4972         ioc->base_cmds.reply = NULL;
4973         ioc->tm_cmds.reply = NULL;
4974         ioc->scsih_cmds.reply = NULL;
4975         ioc->transport_cmds.reply = NULL;
4976         ioc->config_cmds.reply = NULL;
4977         ioc->pfacts = NULL;
4978         return r;
4979 }
4980
4981
4982 /**
4983  * mpt3sas_base_detach - remove controller instance
4984  * @ioc: per adapter object
4985  *
4986  * Return nothing.
4987  */
4988 void
4989 mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc)
4990 {
4991         dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
4992             __func__));
4993
4994         mpt3sas_base_stop_watchdog(ioc);
4995         mpt3sas_base_free_resources(ioc);
4996         _base_release_memory_pools(ioc);
4997         pci_set_drvdata(ioc->pdev, NULL);
4998         kfree(ioc->cpu_msix_table);
4999         kfree(ioc->pd_handles);
5000         kfree(ioc->blocking_handles);
5001         kfree(ioc->pfacts);
5002         kfree(ioc->ctl_cmds.reply);
5003         kfree(ioc->ctl_cmds.sense);
5004         kfree(ioc->base_cmds.reply);
5005         kfree(ioc->port_enable_cmds.reply);
5006         kfree(ioc->tm_cmds.reply);
5007         kfree(ioc->transport_cmds.reply);
5008         kfree(ioc->scsih_cmds.reply);
5009         kfree(ioc->config_cmds.reply);
5010 }
5011
5012 /**
5013  * _base_reset_handler - reset callback handler (for base)
5014  * @ioc: per adapter object
5015  * @reset_phase: phase
5016  *
5017  * The handler for doing any required cleanup or initialization.
5018  *
5019  * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET,
5020  * MPT3_IOC_DONE_RESET
5021  *
5022  * Return nothing.
5023  */
5024 static void
5025 _base_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
5026 {
5027         mpt3sas_scsih_reset_handler(ioc, reset_phase);
5028         mpt3sas_ctl_reset_handler(ioc, reset_phase);
5029         switch (reset_phase) {
5030         case MPT3_IOC_PRE_RESET:
5031                 dtmprintk(ioc, pr_info(MPT3SAS_FMT
5032                 "%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__));
5033                 break;
5034         case MPT3_IOC_AFTER_RESET:
5035                 dtmprintk(ioc, pr_info(MPT3SAS_FMT
5036                 "%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__));
5037                 if (ioc->transport_cmds.status & MPT3_CMD_PENDING) {
5038                         ioc->transport_cmds.status |= MPT3_CMD_RESET;
5039                         mpt3sas_base_free_smid(ioc, ioc->transport_cmds.smid);
5040                         complete(&ioc->transport_cmds.done);
5041                 }
5042                 if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
5043                         ioc->base_cmds.status |= MPT3_CMD_RESET;
5044                         mpt3sas_base_free_smid(ioc, ioc->base_cmds.smid);
5045                         complete(&ioc->base_cmds.done);
5046                 }
5047                 if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
5048                         ioc->port_enable_failed = 1;
5049                         ioc->port_enable_cmds.status |= MPT3_CMD_RESET;
5050                         mpt3sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
5051                         if (ioc->is_driver_loading) {
5052                                 ioc->start_scan_failed =
5053                                     MPI2_IOCSTATUS_INTERNAL_ERROR;
5054                                 ioc->start_scan = 0;
5055                                 ioc->port_enable_cmds.status =
5056                                     MPT3_CMD_NOT_USED;
5057                         } else
5058                                 complete(&ioc->port_enable_cmds.done);
5059                 }
5060                 if (ioc->config_cmds.status & MPT3_CMD_PENDING) {
5061                         ioc->config_cmds.status |= MPT3_CMD_RESET;
5062                         mpt3sas_base_free_smid(ioc, ioc->config_cmds.smid);
5063                         ioc->config_cmds.smid = USHRT_MAX;
5064                         complete(&ioc->config_cmds.done);
5065                 }
5066                 break;
5067         case MPT3_IOC_DONE_RESET:
5068                 dtmprintk(ioc, pr_info(MPT3SAS_FMT
5069                         "%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__));
5070                 break;
5071         }
5072 }
5073
5074 /**
5075  * _wait_for_commands_to_complete - reset controller
5076  * @ioc: Pointer to MPT_ADAPTER structure
5077  * @sleep_flag: CAN_SLEEP or NO_SLEEP
5078  *
5079  * This function waiting(3s) for all pending commands to complete
5080  * prior to putting controller in reset.
5081  */
5082 static void
5083 _wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
5084 {
5085         u32 ioc_state;
5086         unsigned long flags;
5087         u16 i;
5088
5089         ioc->pending_io_count = 0;
5090         if (sleep_flag != CAN_SLEEP)
5091                 return;
5092
5093         ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
5094         if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
5095                 return;
5096
5097         /* pending command count */
5098         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
5099         for (i = 0; i < ioc->scsiio_depth; i++)
5100                 if (ioc->scsi_lookup[i].cb_idx != 0xFF)
5101                         ioc->pending_io_count++;
5102         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
5103
5104         if (!ioc->pending_io_count)
5105                 return;
5106
5107         /* wait for pending commands to complete */
5108         wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ);
5109 }
5110
5111 /**
5112  * mpt3sas_base_hard_reset_handler - reset controller
5113  * @ioc: Pointer to MPT_ADAPTER structure
5114  * @sleep_flag: CAN_SLEEP or NO_SLEEP
5115  * @type: FORCE_BIG_HAMMER or SOFT_RESET
5116  *
5117  * Returns 0 for success, non-zero for failure.
5118  */
5119 int
5120 mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
5121         enum reset_type type)
5122 {
5123         int r;
5124         unsigned long flags;
5125         u32 ioc_state;
5126         u8 is_fault = 0, is_trigger = 0;
5127
5128         dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
5129             __func__));
5130
5131         if (ioc->pci_error_recovery) {
5132                 pr_err(MPT3SAS_FMT "%s: pci error recovery reset\n",
5133                     ioc->name, __func__);
5134                 r = 0;
5135                 goto out_unlocked;
5136         }
5137
5138         if (mpt3sas_fwfault_debug)
5139                 mpt3sas_halt_firmware(ioc);
5140
5141         /* TODO - What we really should be doing is pulling
5142          * out all the code associated with NO_SLEEP; its never used.
5143          * That is legacy code from mpt fusion driver, ported over.
5144          * I will leave this BUG_ON here for now till its been resolved.
5145          */
5146         BUG_ON(sleep_flag == NO_SLEEP);
5147
5148         /* wait for an active reset in progress to complete */
5149         if (!mutex_trylock(&ioc->reset_in_progress_mutex)) {
5150                 do {
5151                         ssleep(1);
5152                 } while (ioc->shost_recovery == 1);
5153                 dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
5154                     __func__));
5155                 return ioc->ioc_reset_in_progress_status;
5156         }
5157
5158         spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
5159         ioc->shost_recovery = 1;
5160         spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
5161
5162         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
5163             MPT3_DIAG_BUFFER_IS_REGISTERED) &&
5164             (!(ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
5165             MPT3_DIAG_BUFFER_IS_RELEASED))) {
5166                 is_trigger = 1;
5167                 ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
5168                 if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
5169                         is_fault = 1;
5170         }
5171         _base_reset_handler(ioc, MPT3_IOC_PRE_RESET);
5172         _wait_for_commands_to_complete(ioc, sleep_flag);
5173         _base_mask_interrupts(ioc);
5174         r = _base_make_ioc_ready(ioc, sleep_flag, type);
5175         if (r)
5176                 goto out;
5177         _base_reset_handler(ioc, MPT3_IOC_AFTER_RESET);
5178
5179         /* If this hard reset is called while port enable is active, then
5180          * there is no reason to call make_ioc_operational
5181          */
5182         if (ioc->is_driver_loading && ioc->port_enable_failed) {
5183                 ioc->remove_host = 1;
5184                 r = -EFAULT;
5185                 goto out;
5186         }
5187         r = _base_get_ioc_facts(ioc, CAN_SLEEP);
5188         if (r)
5189                 goto out;
5190
5191         if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable)
5192                 panic("%s: Issue occurred with flashing controller firmware."
5193                       "Please reboot the system and ensure that the correct"
5194                       " firmware version is running\n", ioc->name);
5195
5196         r = _base_make_ioc_operational(ioc, sleep_flag);
5197         if (!r)
5198                 _base_reset_handler(ioc, MPT3_IOC_DONE_RESET);
5199
5200  out:
5201         dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: %s\n",
5202             ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED")));
5203
5204         spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
5205         ioc->ioc_reset_in_progress_status = r;
5206         ioc->shost_recovery = 0;
5207         spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
5208         ioc->ioc_reset_count++;
5209         mutex_unlock(&ioc->reset_in_progress_mutex);
5210
5211  out_unlocked:
5212         if ((r == 0) && is_trigger) {
5213                 if (is_fault)
5214                         mpt3sas_trigger_master(ioc, MASTER_TRIGGER_FW_FAULT);
5215                 else
5216                         mpt3sas_trigger_master(ioc,
5217                             MASTER_TRIGGER_ADAPTER_RESET);
5218         }
5219         dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
5220             __func__));
5221         return r;
5222 }