scsi: lpfc: Add EDC ELS support
[linux-2.6-block.git] / drivers / scsi / lpfc / lpfc_attr.c
1 /*******************************************************************
2  * This file is part of the Emulex Linux Device Driver for         *
3  * Fibre Channel Host Bus Adapters.                                *
4  * Copyright (C) 2017-2021 Broadcom. All Rights Reserved. The term *
5  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.  *
6  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
7  * EMULEX and SLI are trademarks of Emulex.                        *
8  * www.broadcom.com                                                *
9  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
10  *                                                                 *
11  * This program is free software; you can redistribute it and/or   *
12  * modify it under the terms of version 2 of the GNU General       *
13  * Public License as published by the Free Software Foundation.    *
14  * This program is distributed in the hope that it will be useful. *
15  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
16  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
17  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
18  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
19  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
20  * more details, a copy of which can be found in the file COPYING  *
21  * included with this package.                                     *
22  *******************************************************************/
23
24 #include <linux/ctype.h>
25 #include <linux/delay.h>
26 #include <linux/pci.h>
27 #include <linux/interrupt.h>
28 #include <linux/module.h>
29 #include <linux/aer.h>
30 #include <linux/gfp.h>
31 #include <linux/kernel.h>
32
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_device.h>
35 #include <scsi/scsi_host.h>
36 #include <scsi/scsi_tcq.h>
37 #include <scsi/scsi_transport_fc.h>
38 #include <scsi/fc/fc_fs.h>
39
40 #include "lpfc_hw4.h"
41 #include "lpfc_hw.h"
42 #include "lpfc_sli.h"
43 #include "lpfc_sli4.h"
44 #include "lpfc_nl.h"
45 #include "lpfc_disc.h"
46 #include "lpfc.h"
47 #include "lpfc_scsi.h"
48 #include "lpfc_nvme.h"
49 #include "lpfc_logmsg.h"
50 #include "lpfc_version.h"
51 #include "lpfc_compat.h"
52 #include "lpfc_crtn.h"
53 #include "lpfc_vport.h"
54 #include "lpfc_attr.h"
55
56 #define LPFC_DEF_DEVLOSS_TMO    30
57 #define LPFC_MIN_DEVLOSS_TMO    1
58 #define LPFC_MAX_DEVLOSS_TMO    255
59
60 /*
61  * Write key size should be multiple of 4. If write key is changed
62  * make sure that library write key is also changed.
63  */
64 #define LPFC_REG_WRITE_KEY_SIZE 4
65 #define LPFC_REG_WRITE_KEY      "EMLX"
66
67 const char *const trunk_errmsg[] = {    /* map errcode */
68         "",     /* There is no such error code at index 0*/
69         "link negotiated speed does not match existing"
70                 " trunk - link was \"low\" speed",
71         "link negotiated speed does not match"
72                 " existing trunk - link was \"middle\" speed",
73         "link negotiated speed does not match existing"
74                 " trunk - link was \"high\" speed",
75         "Attached to non-trunking port - F_Port",
76         "Attached to non-trunking port - N_Port",
77         "FLOGI response timeout",
78         "non-FLOGI frame received",
79         "Invalid FLOGI response",
80         "Trunking initialization protocol",
81         "Trunk peer device mismatch",
82 };
83
84 /**
85  * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules
86  * @incr: integer to convert.
87  * @hdw: ascii string holding converted integer plus a string terminator.
88  *
89  * Description:
90  * JEDEC Joint Electron Device Engineering Council.
91  * Convert a 32 bit integer composed of 8 nibbles into an 8 byte ascii
92  * character string. The string is then terminated with a NULL in byte 9.
93  * Hex 0-9 becomes ascii '0' to '9'.
94  * Hex a-f becomes ascii '=' to 'B' capital B.
95  *
96  * Notes:
97  * Coded for 32 bit integers only.
98  **/
99 static void
100 lpfc_jedec_to_ascii(int incr, char hdw[])
101 {
102         int i, j;
103         for (i = 0; i < 8; i++) {
104                 j = (incr & 0xf);
105                 if (j <= 9)
106                         hdw[7 - i] = 0x30 +  j;
107                  else
108                         hdw[7 - i] = 0x61 + j - 10;
109                 incr = (incr >> 4);
110         }
111         hdw[8] = 0;
112         return;
113 }
114
115 /**
116  * lpfc_drvr_version_show - Return the Emulex driver string with version number
117  * @dev: class unused variable.
118  * @attr: device attribute, not used.
119  * @buf: on return contains the module description text.
120  *
121  * Returns: size of formatted string.
122  **/
123 static ssize_t
124 lpfc_drvr_version_show(struct device *dev, struct device_attribute *attr,
125                        char *buf)
126 {
127         return scnprintf(buf, PAGE_SIZE, LPFC_MODULE_DESC "\n");
128 }
129
130 /**
131  * lpfc_enable_fip_show - Return the fip mode of the HBA
132  * @dev: class unused variable.
133  * @attr: device attribute, not used.
134  * @buf: on return contains the module description text.
135  *
136  * Returns: size of formatted string.
137  **/
138 static ssize_t
139 lpfc_enable_fip_show(struct device *dev, struct device_attribute *attr,
140                        char *buf)
141 {
142         struct Scsi_Host *shost = class_to_shost(dev);
143         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
144         struct lpfc_hba   *phba = vport->phba;
145
146         if (phba->hba_flag & HBA_FIP_SUPPORT)
147                 return scnprintf(buf, PAGE_SIZE, "1\n");
148         else
149                 return scnprintf(buf, PAGE_SIZE, "0\n");
150 }
151
152 static ssize_t
153 lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr,
154                     char *buf)
155 {
156         struct Scsi_Host *shost = class_to_shost(dev);
157         struct lpfc_vport *vport = shost_priv(shost);
158         struct lpfc_hba   *phba = vport->phba;
159         struct lpfc_nvmet_tgtport *tgtp;
160         struct nvme_fc_local_port *localport;
161         struct lpfc_nvme_lport *lport;
162         struct lpfc_nvme_rport *rport;
163         struct lpfc_nodelist *ndlp;
164         struct nvme_fc_remote_port *nrport;
165         struct lpfc_fc4_ctrl_stat *cstat;
166         uint64_t data1, data2, data3;
167         uint64_t totin, totout, tot;
168         char *statep;
169         int i;
170         int len = 0;
171         char tmp[LPFC_MAX_NVME_INFO_TMP_LEN] = {0};
172
173         if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) {
174                 len = scnprintf(buf, PAGE_SIZE, "NVME Disabled\n");
175                 return len;
176         }
177         if (phba->nvmet_support) {
178                 if (!phba->targetport) {
179                         len = scnprintf(buf, PAGE_SIZE,
180                                         "NVME Target: x%llx is not allocated\n",
181                                         wwn_to_u64(vport->fc_portname.u.wwn));
182                         return len;
183                 }
184                 /* Port state is only one of two values for now. */
185                 if (phba->targetport->port_id)
186                         statep = "REGISTERED";
187                 else
188                         statep = "INIT";
189                 scnprintf(tmp, sizeof(tmp),
190                           "NVME Target Enabled  State %s\n",
191                           statep);
192                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
193                         goto buffer_done;
194
195                 scnprintf(tmp, sizeof(tmp),
196                           "%s%d WWPN x%llx WWNN x%llx DID x%06x\n",
197                           "NVME Target: lpfc",
198                           phba->brd_no,
199                           wwn_to_u64(vport->fc_portname.u.wwn),
200                           wwn_to_u64(vport->fc_nodename.u.wwn),
201                           phba->targetport->port_id);
202                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
203                         goto buffer_done;
204
205                 if (strlcat(buf, "\nNVME Target: Statistics\n", PAGE_SIZE)
206                     >= PAGE_SIZE)
207                         goto buffer_done;
208
209                 tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
210                 scnprintf(tmp, sizeof(tmp),
211                           "LS: Rcv %08x Drop %08x Abort %08x\n",
212                           atomic_read(&tgtp->rcv_ls_req_in),
213                           atomic_read(&tgtp->rcv_ls_req_drop),
214                           atomic_read(&tgtp->xmt_ls_abort));
215                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
216                         goto buffer_done;
217
218                 if (atomic_read(&tgtp->rcv_ls_req_in) !=
219                     atomic_read(&tgtp->rcv_ls_req_out)) {
220                         scnprintf(tmp, sizeof(tmp),
221                                   "Rcv LS: in %08x != out %08x\n",
222                                   atomic_read(&tgtp->rcv_ls_req_in),
223                                   atomic_read(&tgtp->rcv_ls_req_out));
224                         if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
225                                 goto buffer_done;
226                 }
227
228                 scnprintf(tmp, sizeof(tmp),
229                           "LS: Xmt %08x Drop %08x Cmpl %08x\n",
230                           atomic_read(&tgtp->xmt_ls_rsp),
231                           atomic_read(&tgtp->xmt_ls_drop),
232                           atomic_read(&tgtp->xmt_ls_rsp_cmpl));
233                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
234                         goto buffer_done;
235
236                 scnprintf(tmp, sizeof(tmp),
237                           "LS: RSP Abort %08x xb %08x Err %08x\n",
238                           atomic_read(&tgtp->xmt_ls_rsp_aborted),
239                           atomic_read(&tgtp->xmt_ls_rsp_xb_set),
240                           atomic_read(&tgtp->xmt_ls_rsp_error));
241                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
242                         goto buffer_done;
243
244                 scnprintf(tmp, sizeof(tmp),
245                           "FCP: Rcv %08x Defer %08x Release %08x "
246                           "Drop %08x\n",
247                           atomic_read(&tgtp->rcv_fcp_cmd_in),
248                           atomic_read(&tgtp->rcv_fcp_cmd_defer),
249                           atomic_read(&tgtp->xmt_fcp_release),
250                           atomic_read(&tgtp->rcv_fcp_cmd_drop));
251                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
252                         goto buffer_done;
253
254                 if (atomic_read(&tgtp->rcv_fcp_cmd_in) !=
255                     atomic_read(&tgtp->rcv_fcp_cmd_out)) {
256                         scnprintf(tmp, sizeof(tmp),
257                                   "Rcv FCP: in %08x != out %08x\n",
258                                   atomic_read(&tgtp->rcv_fcp_cmd_in),
259                                   atomic_read(&tgtp->rcv_fcp_cmd_out));
260                         if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
261                                 goto buffer_done;
262                 }
263
264                 scnprintf(tmp, sizeof(tmp),
265                           "FCP Rsp: RD %08x rsp %08x WR %08x rsp %08x "
266                           "drop %08x\n",
267                           atomic_read(&tgtp->xmt_fcp_read),
268                           atomic_read(&tgtp->xmt_fcp_read_rsp),
269                           atomic_read(&tgtp->xmt_fcp_write),
270                           atomic_read(&tgtp->xmt_fcp_rsp),
271                           atomic_read(&tgtp->xmt_fcp_drop));
272                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
273                         goto buffer_done;
274
275                 scnprintf(tmp, sizeof(tmp),
276                           "FCP Rsp Cmpl: %08x err %08x drop %08x\n",
277                           atomic_read(&tgtp->xmt_fcp_rsp_cmpl),
278                           atomic_read(&tgtp->xmt_fcp_rsp_error),
279                           atomic_read(&tgtp->xmt_fcp_rsp_drop));
280                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
281                         goto buffer_done;
282
283                 scnprintf(tmp, sizeof(tmp),
284                           "FCP Rsp Abort: %08x xb %08x xricqe  %08x\n",
285                           atomic_read(&tgtp->xmt_fcp_rsp_aborted),
286                           atomic_read(&tgtp->xmt_fcp_rsp_xb_set),
287                           atomic_read(&tgtp->xmt_fcp_xri_abort_cqe));
288                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
289                         goto buffer_done;
290
291                 scnprintf(tmp, sizeof(tmp),
292                           "ABORT: Xmt %08x Cmpl %08x\n",
293                           atomic_read(&tgtp->xmt_fcp_abort),
294                           atomic_read(&tgtp->xmt_fcp_abort_cmpl));
295                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
296                         goto buffer_done;
297
298                 scnprintf(tmp, sizeof(tmp),
299                           "ABORT: Sol %08x  Usol %08x Err %08x Cmpl %08x\n",
300                           atomic_read(&tgtp->xmt_abort_sol),
301                           atomic_read(&tgtp->xmt_abort_unsol),
302                           atomic_read(&tgtp->xmt_abort_rsp),
303                           atomic_read(&tgtp->xmt_abort_rsp_error));
304                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
305                         goto buffer_done;
306
307                 scnprintf(tmp, sizeof(tmp),
308                           "DELAY: ctx %08x  fod %08x wqfull %08x\n",
309                           atomic_read(&tgtp->defer_ctx),
310                           atomic_read(&tgtp->defer_fod),
311                           atomic_read(&tgtp->defer_wqfull));
312                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
313                         goto buffer_done;
314
315                 /* Calculate outstanding IOs */
316                 tot = atomic_read(&tgtp->rcv_fcp_cmd_drop);
317                 tot += atomic_read(&tgtp->xmt_fcp_release);
318                 tot = atomic_read(&tgtp->rcv_fcp_cmd_in) - tot;
319
320                 scnprintf(tmp, sizeof(tmp),
321                           "IO_CTX: %08x  WAIT: cur %08x tot %08x\n"
322                           "CTX Outstanding %08llx\n\n",
323                           phba->sli4_hba.nvmet_xri_cnt,
324                           phba->sli4_hba.nvmet_io_wait_cnt,
325                           phba->sli4_hba.nvmet_io_wait_total,
326                           tot);
327                 strlcat(buf, tmp, PAGE_SIZE);
328                 goto buffer_done;
329         }
330
331         localport = vport->localport;
332         if (!localport) {
333                 len = scnprintf(buf, PAGE_SIZE,
334                                 "NVME Initiator x%llx is not allocated\n",
335                                 wwn_to_u64(vport->fc_portname.u.wwn));
336                 return len;
337         }
338         lport = (struct lpfc_nvme_lport *)localport->private;
339         if (strlcat(buf, "\nNVME Initiator Enabled\n", PAGE_SIZE) >= PAGE_SIZE)
340                 goto buffer_done;
341
342         scnprintf(tmp, sizeof(tmp),
343                   "XRI Dist lpfc%d Total %d IO %d ELS %d\n",
344                   phba->brd_no,
345                   phba->sli4_hba.max_cfg_param.max_xri,
346                   phba->sli4_hba.io_xri_max,
347                   lpfc_sli4_get_els_iocb_cnt(phba));
348         if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
349                 goto buffer_done;
350
351         /* Port state is only one of two values for now. */
352         if (localport->port_id)
353                 statep = "ONLINE";
354         else
355                 statep = "UNKNOWN ";
356
357         scnprintf(tmp, sizeof(tmp),
358                   "%s%d WWPN x%llx WWNN x%llx DID x%06x %s\n",
359                   "NVME LPORT lpfc",
360                   phba->brd_no,
361                   wwn_to_u64(vport->fc_portname.u.wwn),
362                   wwn_to_u64(vport->fc_nodename.u.wwn),
363                   localport->port_id, statep);
364         if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
365                 goto buffer_done;
366
367         spin_lock_irq(shost->host_lock);
368
369         list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
370                 nrport = NULL;
371                 spin_lock(&ndlp->lock);
372                 rport = lpfc_ndlp_get_nrport(ndlp);
373                 if (rport)
374                         nrport = rport->remoteport;
375                 spin_unlock(&ndlp->lock);
376                 if (!nrport)
377                         continue;
378
379                 /* Port state is only one of two values for now. */
380                 switch (nrport->port_state) {
381                 case FC_OBJSTATE_ONLINE:
382                         statep = "ONLINE";
383                         break;
384                 case FC_OBJSTATE_UNKNOWN:
385                         statep = "UNKNOWN ";
386                         break;
387                 default:
388                         statep = "UNSUPPORTED";
389                         break;
390                 }
391
392                 /* Tab in to show lport ownership. */
393                 if (strlcat(buf, "NVME RPORT       ", PAGE_SIZE) >= PAGE_SIZE)
394                         goto unlock_buf_done;
395                 if (phba->brd_no >= 10) {
396                         if (strlcat(buf, " ", PAGE_SIZE) >= PAGE_SIZE)
397                                 goto unlock_buf_done;
398                 }
399
400                 scnprintf(tmp, sizeof(tmp), "WWPN x%llx ",
401                           nrport->port_name);
402                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
403                         goto unlock_buf_done;
404
405                 scnprintf(tmp, sizeof(tmp), "WWNN x%llx ",
406                           nrport->node_name);
407                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
408                         goto unlock_buf_done;
409
410                 scnprintf(tmp, sizeof(tmp), "DID x%06x ",
411                           nrport->port_id);
412                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
413                         goto unlock_buf_done;
414
415                 /* An NVME rport can have multiple roles. */
416                 if (nrport->port_role & FC_PORT_ROLE_NVME_INITIATOR) {
417                         if (strlcat(buf, "INITIATOR ", PAGE_SIZE) >= PAGE_SIZE)
418                                 goto unlock_buf_done;
419                 }
420                 if (nrport->port_role & FC_PORT_ROLE_NVME_TARGET) {
421                         if (strlcat(buf, "TARGET ", PAGE_SIZE) >= PAGE_SIZE)
422                                 goto unlock_buf_done;
423                 }
424                 if (nrport->port_role & FC_PORT_ROLE_NVME_DISCOVERY) {
425                         if (strlcat(buf, "DISCSRVC ", PAGE_SIZE) >= PAGE_SIZE)
426                                 goto unlock_buf_done;
427                 }
428                 if (nrport->port_role & ~(FC_PORT_ROLE_NVME_INITIATOR |
429                                           FC_PORT_ROLE_NVME_TARGET |
430                                           FC_PORT_ROLE_NVME_DISCOVERY)) {
431                         scnprintf(tmp, sizeof(tmp), "UNKNOWN ROLE x%x",
432                                   nrport->port_role);
433                         if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
434                                 goto unlock_buf_done;
435                 }
436
437                 scnprintf(tmp, sizeof(tmp), "%s\n", statep);
438                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
439                         goto unlock_buf_done;
440         }
441         spin_unlock_irq(shost->host_lock);
442
443         if (!lport)
444                 goto buffer_done;
445
446         if (strlcat(buf, "\nNVME Statistics\n", PAGE_SIZE) >= PAGE_SIZE)
447                 goto buffer_done;
448
449         scnprintf(tmp, sizeof(tmp),
450                   "LS: Xmt %010x Cmpl %010x Abort %08x\n",
451                   atomic_read(&lport->fc4NvmeLsRequests),
452                   atomic_read(&lport->fc4NvmeLsCmpls),
453                   atomic_read(&lport->xmt_ls_abort));
454         if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
455                 goto buffer_done;
456
457         scnprintf(tmp, sizeof(tmp),
458                   "LS XMIT: Err %08x  CMPL: xb %08x Err %08x\n",
459                   atomic_read(&lport->xmt_ls_err),
460                   atomic_read(&lport->cmpl_ls_xb),
461                   atomic_read(&lport->cmpl_ls_err));
462         if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
463                 goto buffer_done;
464
465         totin = 0;
466         totout = 0;
467         for (i = 0; i < phba->cfg_hdw_queue; i++) {
468                 cstat = &phba->sli4_hba.hdwq[i].nvme_cstat;
469                 tot = cstat->io_cmpls;
470                 totin += tot;
471                 data1 = cstat->input_requests;
472                 data2 = cstat->output_requests;
473                 data3 = cstat->control_requests;
474                 totout += (data1 + data2 + data3);
475         }
476         scnprintf(tmp, sizeof(tmp),
477                   "Total FCP Cmpl %016llx Issue %016llx "
478                   "OutIO %016llx\n",
479                   totin, totout, totout - totin);
480         if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
481                 goto buffer_done;
482
483         scnprintf(tmp, sizeof(tmp),
484                   "\tabort %08x noxri %08x nondlp %08x qdepth %08x "
485                   "wqerr %08x err %08x\n",
486                   atomic_read(&lport->xmt_fcp_abort),
487                   atomic_read(&lport->xmt_fcp_noxri),
488                   atomic_read(&lport->xmt_fcp_bad_ndlp),
489                   atomic_read(&lport->xmt_fcp_qdepth),
490                   atomic_read(&lport->xmt_fcp_wqerr),
491                   atomic_read(&lport->xmt_fcp_err));
492         if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
493                 goto buffer_done;
494
495         scnprintf(tmp, sizeof(tmp),
496                   "FCP CMPL: xb %08x Err %08x\n",
497                   atomic_read(&lport->cmpl_fcp_xb),
498                   atomic_read(&lport->cmpl_fcp_err));
499         strlcat(buf, tmp, PAGE_SIZE);
500
501         /* host_lock is already unlocked. */
502         goto buffer_done;
503
504  unlock_buf_done:
505         spin_unlock_irq(shost->host_lock);
506
507  buffer_done:
508         len = strnlen(buf, PAGE_SIZE);
509
510         if (unlikely(len >= (PAGE_SIZE - 1))) {
511                 lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
512                                 "6314 Catching potential buffer "
513                                 "overflow > PAGE_SIZE = %lu bytes\n",
514                                 PAGE_SIZE);
515                 strlcpy(buf + PAGE_SIZE - 1 - sizeof(LPFC_NVME_INFO_MORE_STR),
516                         LPFC_NVME_INFO_MORE_STR,
517                         sizeof(LPFC_NVME_INFO_MORE_STR) + 1);
518         }
519
520         return len;
521 }
522
523 static ssize_t
524 lpfc_scsi_stat_show(struct device *dev, struct device_attribute *attr,
525                     char *buf)
526 {
527         struct Scsi_Host *shost = class_to_shost(dev);
528         struct lpfc_vport *vport = shost_priv(shost);
529         struct lpfc_hba *phba = vport->phba;
530         int len;
531         struct lpfc_fc4_ctrl_stat *cstat;
532         u64 data1, data2, data3;
533         u64 tot, totin, totout;
534         int i;
535         char tmp[LPFC_MAX_SCSI_INFO_TMP_LEN] = {0};
536
537         if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_FCP) ||
538             (phba->sli_rev != LPFC_SLI_REV4))
539                 return 0;
540
541         scnprintf(buf, PAGE_SIZE, "SCSI HDWQ Statistics\n");
542
543         totin = 0;
544         totout = 0;
545         for (i = 0; i < phba->cfg_hdw_queue; i++) {
546                 cstat = &phba->sli4_hba.hdwq[i].scsi_cstat;
547                 tot = cstat->io_cmpls;
548                 totin += tot;
549                 data1 = cstat->input_requests;
550                 data2 = cstat->output_requests;
551                 data3 = cstat->control_requests;
552                 totout += (data1 + data2 + data3);
553
554                 scnprintf(tmp, sizeof(tmp), "HDWQ (%d): Rd %016llx Wr %016llx "
555                           "IO %016llx ", i, data1, data2, data3);
556                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
557                         goto buffer_done;
558
559                 scnprintf(tmp, sizeof(tmp), "Cmpl %016llx OutIO %016llx\n",
560                           tot, ((data1 + data2 + data3) - tot));
561                 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
562                         goto buffer_done;
563         }
564         scnprintf(tmp, sizeof(tmp), "Total FCP Cmpl %016llx Issue %016llx "
565                   "OutIO %016llx\n", totin, totout, totout - totin);
566         strlcat(buf, tmp, PAGE_SIZE);
567
568 buffer_done:
569         len = strnlen(buf, PAGE_SIZE);
570
571         return len;
572 }
573
574 static ssize_t
575 lpfc_bg_info_show(struct device *dev, struct device_attribute *attr,
576                   char *buf)
577 {
578         struct Scsi_Host *shost = class_to_shost(dev);
579         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
580         struct lpfc_hba   *phba = vport->phba;
581
582         if (phba->cfg_enable_bg) {
583                 if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
584                         return scnprintf(buf, PAGE_SIZE,
585                                         "BlockGuard Enabled\n");
586                 else
587                         return scnprintf(buf, PAGE_SIZE,
588                                         "BlockGuard Not Supported\n");
589         } else
590                 return scnprintf(buf, PAGE_SIZE,
591                                         "BlockGuard Disabled\n");
592 }
593
594 static ssize_t
595 lpfc_bg_guard_err_show(struct device *dev, struct device_attribute *attr,
596                        char *buf)
597 {
598         struct Scsi_Host *shost = class_to_shost(dev);
599         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
600         struct lpfc_hba   *phba = vport->phba;
601
602         return scnprintf(buf, PAGE_SIZE, "%llu\n",
603                         (unsigned long long)phba->bg_guard_err_cnt);
604 }
605
606 static ssize_t
607 lpfc_bg_apptag_err_show(struct device *dev, struct device_attribute *attr,
608                         char *buf)
609 {
610         struct Scsi_Host *shost = class_to_shost(dev);
611         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
612         struct lpfc_hba   *phba = vport->phba;
613
614         return scnprintf(buf, PAGE_SIZE, "%llu\n",
615                         (unsigned long long)phba->bg_apptag_err_cnt);
616 }
617
618 static ssize_t
619 lpfc_bg_reftag_err_show(struct device *dev, struct device_attribute *attr,
620                         char *buf)
621 {
622         struct Scsi_Host *shost = class_to_shost(dev);
623         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
624         struct lpfc_hba   *phba = vport->phba;
625
626         return scnprintf(buf, PAGE_SIZE, "%llu\n",
627                         (unsigned long long)phba->bg_reftag_err_cnt);
628 }
629
630 /**
631  * lpfc_info_show - Return some pci info about the host in ascii
632  * @dev: class converted to a Scsi_host structure.
633  * @attr: device attribute, not used.
634  * @buf: on return contains the formatted text from lpfc_info().
635  *
636  * Returns: size of formatted string.
637  **/
638 static ssize_t
639 lpfc_info_show(struct device *dev, struct device_attribute *attr,
640                char *buf)
641 {
642         struct Scsi_Host *host = class_to_shost(dev);
643
644         return scnprintf(buf, PAGE_SIZE, "%s\n", lpfc_info(host));
645 }
646
647 /**
648  * lpfc_serialnum_show - Return the hba serial number in ascii
649  * @dev: class converted to a Scsi_host structure.
650  * @attr: device attribute, not used.
651  * @buf: on return contains the formatted text serial number.
652  *
653  * Returns: size of formatted string.
654  **/
655 static ssize_t
656 lpfc_serialnum_show(struct device *dev, struct device_attribute *attr,
657                     char *buf)
658 {
659         struct Scsi_Host  *shost = class_to_shost(dev);
660         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
661         struct lpfc_hba   *phba = vport->phba;
662
663         return scnprintf(buf, PAGE_SIZE, "%s\n", phba->SerialNumber);
664 }
665
666 /**
667  * lpfc_temp_sensor_show - Return the temperature sensor level
668  * @dev: class converted to a Scsi_host structure.
669  * @attr: device attribute, not used.
670  * @buf: on return contains the formatted support level.
671  *
672  * Description:
673  * Returns a number indicating the temperature sensor level currently
674  * supported, zero or one in ascii.
675  *
676  * Returns: size of formatted string.
677  **/
678 static ssize_t
679 lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr,
680                       char *buf)
681 {
682         struct Scsi_Host *shost = class_to_shost(dev);
683         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
684         struct lpfc_hba   *phba = vport->phba;
685         return scnprintf(buf, PAGE_SIZE, "%d\n", phba->temp_sensor_support);
686 }
687
688 /**
689  * lpfc_modeldesc_show - Return the model description of the hba
690  * @dev: class converted to a Scsi_host structure.
691  * @attr: device attribute, not used.
692  * @buf: on return contains the scsi vpd model description.
693  *
694  * Returns: size of formatted string.
695  **/
696 static ssize_t
697 lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr,
698                     char *buf)
699 {
700         struct Scsi_Host  *shost = class_to_shost(dev);
701         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
702         struct lpfc_hba   *phba = vport->phba;
703
704         return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ModelDesc);
705 }
706
707 /**
708  * lpfc_modelname_show - Return the model name of the hba
709  * @dev: class converted to a Scsi_host structure.
710  * @attr: device attribute, not used.
711  * @buf: on return contains the scsi vpd model name.
712  *
713  * Returns: size of formatted string.
714  **/
715 static ssize_t
716 lpfc_modelname_show(struct device *dev, struct device_attribute *attr,
717                     char *buf)
718 {
719         struct Scsi_Host  *shost = class_to_shost(dev);
720         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
721         struct lpfc_hba   *phba = vport->phba;
722
723         return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ModelName);
724 }
725
726 /**
727  * lpfc_programtype_show - Return the program type of the hba
728  * @dev: class converted to a Scsi_host structure.
729  * @attr: device attribute, not used.
730  * @buf: on return contains the scsi vpd program type.
731  *
732  * Returns: size of formatted string.
733  **/
734 static ssize_t
735 lpfc_programtype_show(struct device *dev, struct device_attribute *attr,
736                       char *buf)
737 {
738         struct Scsi_Host  *shost = class_to_shost(dev);
739         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
740         struct lpfc_hba   *phba = vport->phba;
741
742         return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ProgramType);
743 }
744
745 /**
746  * lpfc_mlomgmt_show - Return the Menlo Maintenance sli flag
747  * @dev: class converted to a Scsi_host structure.
748  * @attr: device attribute, not used.
749  * @buf: on return contains the Menlo Maintenance sli flag.
750  *
751  * Returns: size of formatted string.
752  **/
753 static ssize_t
754 lpfc_mlomgmt_show(struct device *dev, struct device_attribute *attr, char *buf)
755 {
756         struct Scsi_Host  *shost = class_to_shost(dev);
757         struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
758         struct lpfc_hba   *phba = vport->phba;
759
760         return scnprintf(buf, PAGE_SIZE, "%d\n",
761                 (phba->sli.sli_flag & LPFC_MENLO_MAINT));
762 }
763
764 /**
765  * lpfc_vportnum_show - Return the port number in ascii of the hba
766  * @dev: class converted to a Scsi_host structure.
767  * @attr: device attribute, not used.
768  * @buf: on return contains scsi vpd program type.
769  *
770  * Returns: size of formatted string.
771  **/
772 static ssize_t
773 lpfc_vportnum_show(struct device *dev, struct device_attribute *attr,
774                    char *buf)
775 {
776         struct Scsi_Host  *shost = class_to_shost(dev);
777         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
778         struct lpfc_hba   *phba = vport->phba;
779
780         return scnprintf(buf, PAGE_SIZE, "%s\n", phba->Port);
781 }
782
783 /**
784  * lpfc_fwrev_show - Return the firmware rev running in the hba
785  * @dev: class converted to a Scsi_host structure.
786  * @attr: device attribute, not used.
787  * @buf: on return contains the scsi vpd program type.
788  *
789  * Returns: size of formatted string.
790  **/
791 static ssize_t
792 lpfc_fwrev_show(struct device *dev, struct device_attribute *attr,
793                 char *buf)
794 {
795         struct Scsi_Host  *shost = class_to_shost(dev);
796         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
797         struct lpfc_hba   *phba = vport->phba;
798         uint32_t if_type;
799         uint8_t sli_family;
800         char fwrev[FW_REV_STR_SIZE];
801         int len;
802
803         lpfc_decode_firmware_rev(phba, fwrev, 1);
804         if_type = phba->sli4_hba.pc_sli4_params.if_type;
805         sli_family = phba->sli4_hba.pc_sli4_params.sli_family;
806
807         if (phba->sli_rev < LPFC_SLI_REV4)
808                 len = scnprintf(buf, PAGE_SIZE, "%s, sli-%d\n",
809                                fwrev, phba->sli_rev);
810         else
811                 len = scnprintf(buf, PAGE_SIZE, "%s, sli-%d:%d:%x\n",
812                                fwrev, phba->sli_rev, if_type, sli_family);
813
814         return len;
815 }
816
817 /**
818  * lpfc_hdw_show - Return the jedec information about the hba
819  * @dev: class converted to a Scsi_host structure.
820  * @attr: device attribute, not used.
821  * @buf: on return contains the scsi vpd program type.
822  *
823  * Returns: size of formatted string.
824  **/
825 static ssize_t
826 lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf)
827 {
828         char hdw[9];
829         struct Scsi_Host  *shost = class_to_shost(dev);
830         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
831         struct lpfc_hba   *phba = vport->phba;
832         lpfc_vpd_t *vp = &phba->vpd;
833
834         lpfc_jedec_to_ascii(vp->rev.biuRev, hdw);
835         return scnprintf(buf, PAGE_SIZE, "%s %08x %08x\n", hdw,
836                          vp->rev.smRev, vp->rev.smFwRev);
837 }
838
839 /**
840  * lpfc_option_rom_version_show - Return the adapter ROM FCode version
841  * @dev: class converted to a Scsi_host structure.
842  * @attr: device attribute, not used.
843  * @buf: on return contains the ROM and FCode ascii strings.
844  *
845  * Returns: size of formatted string.
846  **/
847 static ssize_t
848 lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr,
849                              char *buf)
850 {
851         struct Scsi_Host  *shost = class_to_shost(dev);
852         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
853         struct lpfc_hba   *phba = vport->phba;
854         char fwrev[FW_REV_STR_SIZE];
855
856         if (phba->sli_rev < LPFC_SLI_REV4)
857                 return scnprintf(buf, PAGE_SIZE, "%s\n",
858                                 phba->OptionROMVersion);
859
860         lpfc_decode_firmware_rev(phba, fwrev, 1);
861         return scnprintf(buf, PAGE_SIZE, "%s\n", fwrev);
862 }
863
864 /**
865  * lpfc_link_state_show - Return the link state of the port
866  * @dev: class converted to a Scsi_host structure.
867  * @attr: device attribute, not used.
868  * @buf: on return contains text describing the state of the link.
869  *
870  * Notes:
871  * The switch statement has no default so zero will be returned.
872  *
873  * Returns: size of formatted string.
874  **/
875 static ssize_t
876 lpfc_link_state_show(struct device *dev, struct device_attribute *attr,
877                      char *buf)
878 {
879         struct Scsi_Host  *shost = class_to_shost(dev);
880         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
881         struct lpfc_hba   *phba = vport->phba;
882         int  len = 0;
883
884         switch (phba->link_state) {
885         case LPFC_LINK_UNKNOWN:
886         case LPFC_WARM_START:
887         case LPFC_INIT_START:
888         case LPFC_INIT_MBX_CMDS:
889         case LPFC_LINK_DOWN:
890         case LPFC_HBA_ERROR:
891                 if (phba->hba_flag & LINK_DISABLED)
892                         len += scnprintf(buf + len, PAGE_SIZE-len,
893                                 "Link Down - User disabled\n");
894                 else
895                         len += scnprintf(buf + len, PAGE_SIZE-len,
896                                 "Link Down\n");
897                 break;
898         case LPFC_LINK_UP:
899         case LPFC_CLEAR_LA:
900         case LPFC_HBA_READY:
901                 len += scnprintf(buf + len, PAGE_SIZE-len, "Link Up - ");
902
903                 switch (vport->port_state) {
904                 case LPFC_LOCAL_CFG_LINK:
905                         len += scnprintf(buf + len, PAGE_SIZE-len,
906                                         "Configuring Link\n");
907                         break;
908                 case LPFC_FDISC:
909                 case LPFC_FLOGI:
910                 case LPFC_FABRIC_CFG_LINK:
911                 case LPFC_NS_REG:
912                 case LPFC_NS_QRY:
913                 case LPFC_BUILD_DISC_LIST:
914                 case LPFC_DISC_AUTH:
915                         len += scnprintf(buf + len, PAGE_SIZE - len,
916                                         "Discovery\n");
917                         break;
918                 case LPFC_VPORT_READY:
919                         len += scnprintf(buf + len, PAGE_SIZE - len,
920                                         "Ready\n");
921                         break;
922
923                 case LPFC_VPORT_FAILED:
924                         len += scnprintf(buf + len, PAGE_SIZE - len,
925                                         "Failed\n");
926                         break;
927
928                 case LPFC_VPORT_UNKNOWN:
929                         len += scnprintf(buf + len, PAGE_SIZE - len,
930                                         "Unknown\n");
931                         break;
932                 }
933                 if (phba->sli.sli_flag & LPFC_MENLO_MAINT)
934                         len += scnprintf(buf + len, PAGE_SIZE-len,
935                                         "   Menlo Maint Mode\n");
936                 else if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
937                         if (vport->fc_flag & FC_PUBLIC_LOOP)
938                                 len += scnprintf(buf + len, PAGE_SIZE-len,
939                                                 "   Public Loop\n");
940                         else
941                                 len += scnprintf(buf + len, PAGE_SIZE-len,
942                                                 "   Private Loop\n");
943                 } else {
944                         if (vport->fc_flag & FC_FABRIC)
945                                 len += scnprintf(buf + len, PAGE_SIZE-len,
946                                                 "   Fabric\n");
947                         else
948                                 len += scnprintf(buf + len, PAGE_SIZE-len,
949                                                 "   Point-2-Point\n");
950                 }
951         }
952
953         if ((phba->sli_rev == LPFC_SLI_REV4) &&
954             ((bf_get(lpfc_sli_intf_if_type,
955              &phba->sli4_hba.sli_intf) ==
956              LPFC_SLI_INTF_IF_TYPE_6))) {
957                 struct lpfc_trunk_link link = phba->trunk_link;
958
959                 if (bf_get(lpfc_conf_trunk_port0, &phba->sli4_hba))
960                         len += scnprintf(buf + len, PAGE_SIZE - len,
961                                 "Trunk port 0: Link %s %s\n",
962                                 (link.link0.state == LPFC_LINK_UP) ?
963                                  "Up" : "Down. ",
964                                 trunk_errmsg[link.link0.fault]);
965
966                 if (bf_get(lpfc_conf_trunk_port1, &phba->sli4_hba))
967                         len += scnprintf(buf + len, PAGE_SIZE - len,
968                                 "Trunk port 1: Link %s %s\n",
969                                 (link.link1.state == LPFC_LINK_UP) ?
970                                  "Up" : "Down. ",
971                                 trunk_errmsg[link.link1.fault]);
972
973                 if (bf_get(lpfc_conf_trunk_port2, &phba->sli4_hba))
974                         len += scnprintf(buf + len, PAGE_SIZE - len,
975                                 "Trunk port 2: Link %s %s\n",
976                                 (link.link2.state == LPFC_LINK_UP) ?
977                                  "Up" : "Down. ",
978                                 trunk_errmsg[link.link2.fault]);
979
980                 if (bf_get(lpfc_conf_trunk_port3, &phba->sli4_hba))
981                         len += scnprintf(buf + len, PAGE_SIZE - len,
982                                 "Trunk port 3: Link %s %s\n",
983                                 (link.link3.state == LPFC_LINK_UP) ?
984                                  "Up" : "Down. ",
985                                 trunk_errmsg[link.link3.fault]);
986
987         }
988
989         return len;
990 }
991
992 /**
993  * lpfc_sli4_protocol_show - Return the fip mode of the HBA
994  * @dev: class unused variable.
995  * @attr: device attribute, not used.
996  * @buf: on return contains the module description text.
997  *
998  * Returns: size of formatted string.
999  **/
1000 static ssize_t
1001 lpfc_sli4_protocol_show(struct device *dev, struct device_attribute *attr,
1002                         char *buf)
1003 {
1004         struct Scsi_Host *shost = class_to_shost(dev);
1005         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1006         struct lpfc_hba *phba = vport->phba;
1007
1008         if (phba->sli_rev < LPFC_SLI_REV4)
1009                 return scnprintf(buf, PAGE_SIZE, "fc\n");
1010
1011         if (phba->sli4_hba.lnk_info.lnk_dv == LPFC_LNK_DAT_VAL) {
1012                 if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_GE)
1013                         return scnprintf(buf, PAGE_SIZE, "fcoe\n");
1014                 if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_FC)
1015                         return scnprintf(buf, PAGE_SIZE, "fc\n");
1016         }
1017         return scnprintf(buf, PAGE_SIZE, "unknown\n");
1018 }
1019
1020 /**
1021  * lpfc_oas_supported_show - Return whether or not Optimized Access Storage
1022  *                          (OAS) is supported.
1023  * @dev: class unused variable.
1024  * @attr: device attribute, not used.
1025  * @buf: on return contains the module description text.
1026  *
1027  * Returns: size of formatted string.
1028  **/
1029 static ssize_t
1030 lpfc_oas_supported_show(struct device *dev, struct device_attribute *attr,
1031                         char *buf)
1032 {
1033         struct Scsi_Host *shost = class_to_shost(dev);
1034         struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
1035         struct lpfc_hba *phba = vport->phba;
1036
1037         return scnprintf(buf, PAGE_SIZE, "%d\n",
1038                         phba->sli4_hba.pc_sli4_params.oas_supported);
1039 }
1040
1041 /**
1042  * lpfc_link_state_store - Transition the link_state on an HBA port
1043  * @dev: class device that is converted into a Scsi_host.
1044  * @attr: device attribute, not used.
1045  * @buf: one or more lpfc_polling_flags values.
1046  * @count: not used.
1047  *
1048  * Returns:
1049  * -EINVAL if the buffer is not "up" or "down"
1050  * return from link state change function if non-zero
1051  * length of the buf on success
1052  **/
1053 static ssize_t
1054 lpfc_link_state_store(struct device *dev, struct device_attribute *attr,
1055                 const char *buf, size_t count)
1056 {
1057         struct Scsi_Host  *shost = class_to_shost(dev);
1058         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1059         struct lpfc_hba   *phba = vport->phba;
1060
1061         int status = -EINVAL;
1062
1063         if ((strncmp(buf, "up", sizeof("up") - 1) == 0) &&
1064                         (phba->link_state == LPFC_LINK_DOWN))
1065                 status = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
1066         else if ((strncmp(buf, "down", sizeof("down") - 1) == 0) &&
1067                         (phba->link_state >= LPFC_LINK_UP))
1068                 status = phba->lpfc_hba_down_link(phba, MBX_NOWAIT);
1069
1070         if (status == 0)
1071                 return strlen(buf);
1072         else
1073                 return status;
1074 }
1075
1076 /**
1077  * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports
1078  * @dev: class device that is converted into a Scsi_host.
1079  * @attr: device attribute, not used.
1080  * @buf: on return contains the sum of fc mapped and unmapped.
1081  *
1082  * Description:
1083  * Returns the ascii text number of the sum of the fc mapped and unmapped
1084  * vport counts.
1085  *
1086  * Returns: size of formatted string.
1087  **/
1088 static ssize_t
1089 lpfc_num_discovered_ports_show(struct device *dev,
1090                                struct device_attribute *attr, char *buf)
1091 {
1092         struct Scsi_Host  *shost = class_to_shost(dev);
1093         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1094
1095         return scnprintf(buf, PAGE_SIZE, "%d\n",
1096                         vport->fc_map_cnt + vport->fc_unmap_cnt);
1097 }
1098
1099 /**
1100  * lpfc_issue_lip - Misnomer, name carried over from long ago
1101  * @shost: Scsi_Host pointer.
1102  *
1103  * Description:
1104  * Bring the link down gracefully then re-init the link. The firmware will
1105  * re-init the fiber channel interface as required. Does not issue a LIP.
1106  *
1107  * Returns:
1108  * -EPERM port offline or management commands are being blocked
1109  * -ENOMEM cannot allocate memory for the mailbox command
1110  * -EIO error sending the mailbox command
1111  * zero for success
1112  **/
1113 static int
1114 lpfc_issue_lip(struct Scsi_Host *shost)
1115 {
1116         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1117         struct lpfc_hba   *phba = vport->phba;
1118         LPFC_MBOXQ_t *pmboxq;
1119         int mbxstatus = MBXERR_ERROR;
1120
1121         /*
1122          * If the link is offline, disabled or BLOCK_MGMT_IO
1123          * it doesn't make any sense to allow issue_lip
1124          */
1125         if ((vport->fc_flag & FC_OFFLINE_MODE) ||
1126             (phba->hba_flag & LINK_DISABLED) ||
1127             (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO))
1128                 return -EPERM;
1129
1130         pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
1131
1132         if (!pmboxq)
1133                 return -ENOMEM;
1134
1135         memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
1136         pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;
1137         pmboxq->u.mb.mbxOwner = OWN_HOST;
1138
1139         mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);
1140
1141         if ((mbxstatus == MBX_SUCCESS) &&
1142             (pmboxq->u.mb.mbxStatus == 0 ||
1143              pmboxq->u.mb.mbxStatus == MBXERR_LINK_DOWN)) {
1144                 memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
1145                 lpfc_init_link(phba, pmboxq, phba->cfg_topology,
1146                                phba->cfg_link_speed);
1147                 mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq,
1148                                                      phba->fc_ratov * 2);
1149                 if ((mbxstatus == MBX_SUCCESS) &&
1150                     (pmboxq->u.mb.mbxStatus == MBXERR_SEC_NO_PERMISSION))
1151                         lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
1152                                         "2859 SLI authentication is required "
1153                                         "for INIT_LINK but has not done yet\n");
1154         }
1155
1156         lpfc_set_loopback_flag(phba);
1157         if (mbxstatus != MBX_TIMEOUT)
1158                 mempool_free(pmboxq, phba->mbox_mem_pool);
1159
1160         if (mbxstatus == MBXERR_ERROR)
1161                 return -EIO;
1162
1163         return 0;
1164 }
1165
1166 int
1167 lpfc_emptyq_wait(struct lpfc_hba *phba, struct list_head *q, spinlock_t *lock)
1168 {
1169         int cnt = 0;
1170
1171         spin_lock_irq(lock);
1172         while (!list_empty(q)) {
1173                 spin_unlock_irq(lock);
1174                 msleep(20);
1175                 if (cnt++ > 250) {  /* 5 secs */
1176                         lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
1177                                         "0466 Outstanding IO when "
1178                                         "bringing Adapter offline\n");
1179                                 return 0;
1180                 }
1181                 spin_lock_irq(lock);
1182         }
1183         spin_unlock_irq(lock);
1184         return 1;
1185 }
1186
1187 /**
1188  * lpfc_do_offline - Issues a mailbox command to bring the link down
1189  * @phba: lpfc_hba pointer.
1190  * @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL.
1191  *
1192  * Notes:
1193  * Assumes any error from lpfc_do_offline() will be negative.
1194  * Can wait up to 5 seconds for the port ring buffers count
1195  * to reach zero, prints a warning if it is not zero and continues.
1196  * lpfc_workq_post_event() returns a non-zero return code if call fails.
1197  *
1198  * Returns:
1199  * -EIO error posting the event
1200  * zero for success
1201  **/
1202 static int
1203 lpfc_do_offline(struct lpfc_hba *phba, uint32_t type)
1204 {
1205         struct completion online_compl;
1206         struct lpfc_queue *qp = NULL;
1207         struct lpfc_sli_ring *pring;
1208         struct lpfc_sli *psli;
1209         int status = 0;
1210         int i;
1211         int rc;
1212
1213         init_completion(&online_compl);
1214         rc = lpfc_workq_post_event(phba, &status, &online_compl,
1215                               LPFC_EVT_OFFLINE_PREP);
1216         if (rc == 0)
1217                 return -ENOMEM;
1218
1219         wait_for_completion(&online_compl);
1220
1221         if (status != 0)
1222                 return -EIO;
1223
1224         psli = &phba->sli;
1225
1226         /*
1227          * If freeing the queues have already started, don't access them.
1228          * Otherwise set FREE_WAIT to indicate that queues are being used
1229          * to hold the freeing process until we finish.
1230          */
1231         spin_lock_irq(&phba->hbalock);
1232         if (!(psli->sli_flag & LPFC_QUEUE_FREE_INIT)) {
1233                 psli->sli_flag |= LPFC_QUEUE_FREE_WAIT;
1234         } else {
1235                 spin_unlock_irq(&phba->hbalock);
1236                 goto skip_wait;
1237         }
1238         spin_unlock_irq(&phba->hbalock);
1239
1240         /* Wait a little for things to settle down, but not
1241          * long enough for dev loss timeout to expire.
1242          */
1243         if (phba->sli_rev != LPFC_SLI_REV4) {
1244                 for (i = 0; i < psli->num_rings; i++) {
1245                         pring = &psli->sli3_ring[i];
1246                         if (!lpfc_emptyq_wait(phba, &pring->txcmplq,
1247                                               &phba->hbalock))
1248                                 goto out;
1249                 }
1250         } else {
1251                 list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) {
1252                         pring = qp->pring;
1253                         if (!pring)
1254                                 continue;
1255                         if (!lpfc_emptyq_wait(phba, &pring->txcmplq,
1256                                               &pring->ring_lock))
1257                                 goto out;
1258                 }
1259         }
1260 out:
1261         spin_lock_irq(&phba->hbalock);
1262         psli->sli_flag &= ~LPFC_QUEUE_FREE_WAIT;
1263         spin_unlock_irq(&phba->hbalock);
1264
1265 skip_wait:
1266         init_completion(&online_compl);
1267         rc = lpfc_workq_post_event(phba, &status, &online_compl, type);
1268         if (rc == 0)
1269                 return -ENOMEM;
1270
1271         wait_for_completion(&online_compl);
1272
1273         if (status != 0)
1274                 return -EIO;
1275
1276         return 0;
1277 }
1278
1279 /**
1280  * lpfc_reset_pci_bus - resets PCI bridge controller's secondary bus of an HBA
1281  * @phba: lpfc_hba pointer.
1282  *
1283  * Description:
1284  * Issues a PCI secondary bus reset for the phba->pcidev.
1285  *
1286  * Notes:
1287  * First walks the bus_list to ensure only PCI devices with Emulex
1288  * vendor id, device ids that support hot reset, only one occurrence
1289  * of function 0, and all ports on the bus are in offline mode to ensure the
1290  * hot reset only affects one valid HBA.
1291  *
1292  * Returns:
1293  * -ENOTSUPP, cfg_enable_hba_reset must be of value 2
1294  * -ENODEV,   NULL ptr to pcidev
1295  * -EBADSLT,  detected invalid device
1296  * -EBUSY,    port is not in offline state
1297  *      0,    successful
1298  */
1299 static int
1300 lpfc_reset_pci_bus(struct lpfc_hba *phba)
1301 {
1302         struct pci_dev *pdev = phba->pcidev;
1303         struct Scsi_Host *shost = NULL;
1304         struct lpfc_hba *phba_other = NULL;
1305         struct pci_dev *ptr = NULL;
1306         int res;
1307
1308         if (phba->cfg_enable_hba_reset != 2)
1309                 return -ENOTSUPP;
1310
1311         if (!pdev) {
1312                 lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "8345 pdev NULL!\n");
1313                 return -ENODEV;
1314         }
1315
1316         res = lpfc_check_pci_resettable(phba);
1317         if (res)
1318                 return res;
1319
1320         /* Walk the list of devices on the pci_dev's bus */
1321         list_for_each_entry(ptr, &pdev->bus->devices, bus_list) {
1322                 /* Check port is offline */
1323                 shost = pci_get_drvdata(ptr);
1324                 if (shost) {
1325                         phba_other =
1326                                 ((struct lpfc_vport *)shost->hostdata)->phba;
1327                         if (!(phba_other->pport->fc_flag & FC_OFFLINE_MODE)) {
1328                                 lpfc_printf_log(phba_other, KERN_INFO, LOG_INIT,
1329                                                 "8349 WWPN = 0x%02x%02x%02x%02x"
1330                                                 "%02x%02x%02x%02x is not "
1331                                                 "offline!\n",
1332                                                 phba_other->wwpn[0],
1333                                                 phba_other->wwpn[1],
1334                                                 phba_other->wwpn[2],
1335                                                 phba_other->wwpn[3],
1336                                                 phba_other->wwpn[4],
1337                                                 phba_other->wwpn[5],
1338                                                 phba_other->wwpn[6],
1339                                                 phba_other->wwpn[7]);
1340                                 return -EBUSY;
1341                         }
1342                 }
1343         }
1344
1345         /* Issue PCI bus reset */
1346         res = pci_reset_bus(pdev);
1347         if (res) {
1348                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1349                                 "8350 PCI reset bus failed: %d\n", res);
1350         }
1351
1352         return res;
1353 }
1354
1355 /**
1356  * lpfc_selective_reset - Offline then onlines the port
1357  * @phba: lpfc_hba pointer.
1358  *
1359  * Description:
1360  * If the port is configured to allow a reset then the hba is brought
1361  * offline then online.
1362  *
1363  * Notes:
1364  * Assumes any error from lpfc_do_offline() will be negative.
1365  * Do not make this function static.
1366  *
1367  * Returns:
1368  * lpfc_do_offline() return code if not zero
1369  * -EIO reset not configured or error posting the event
1370  * zero for success
1371  **/
1372 int
1373 lpfc_selective_reset(struct lpfc_hba *phba)
1374 {
1375         struct completion online_compl;
1376         int status = 0;
1377         int rc;
1378
1379         if (!phba->cfg_enable_hba_reset)
1380                 return -EACCES;
1381
1382         if (!(phba->pport->fc_flag & FC_OFFLINE_MODE)) {
1383                 status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
1384
1385                 if (status != 0)
1386                         return status;
1387         }
1388
1389         init_completion(&online_compl);
1390         rc = lpfc_workq_post_event(phba, &status, &online_compl,
1391                               LPFC_EVT_ONLINE);
1392         if (rc == 0)
1393                 return -ENOMEM;
1394
1395         wait_for_completion(&online_compl);
1396
1397         if (status != 0)
1398                 return -EIO;
1399
1400         return 0;
1401 }
1402
1403 /**
1404  * lpfc_issue_reset - Selectively resets an adapter
1405  * @dev: class device that is converted into a Scsi_host.
1406  * @attr: device attribute, not used.
1407  * @buf: containing the string "selective".
1408  * @count: unused variable.
1409  *
1410  * Description:
1411  * If the buf contains the string "selective" then lpfc_selective_reset()
1412  * is called to perform the reset.
1413  *
1414  * Notes:
1415  * Assumes any error from lpfc_selective_reset() will be negative.
1416  * If lpfc_selective_reset() returns zero then the length of the buffer
1417  * is returned which indicates success
1418  *
1419  * Returns:
1420  * -EINVAL if the buffer does not contain the string "selective"
1421  * length of buf if lpfc-selective_reset() if the call succeeds
1422  * return value of lpfc_selective_reset() if the call fails
1423 **/
1424 static ssize_t
1425 lpfc_issue_reset(struct device *dev, struct device_attribute *attr,
1426                  const char *buf, size_t count)
1427 {
1428         struct Scsi_Host  *shost = class_to_shost(dev);
1429         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1430         struct lpfc_hba   *phba = vport->phba;
1431         int status = -EINVAL;
1432
1433         if (!phba->cfg_enable_hba_reset)
1434                 return -EACCES;
1435
1436         if (strncmp(buf, "selective", sizeof("selective") - 1) == 0)
1437                 status = phba->lpfc_selective_reset(phba);
1438
1439         if (status == 0)
1440                 return strlen(buf);
1441         else
1442                 return status;
1443 }
1444
1445 /**
1446  * lpfc_sli4_pdev_status_reg_wait - Wait for pdev status register for readyness
1447  * @phba: lpfc_hba pointer.
1448  *
1449  * Description:
1450  * SLI4 interface type-2 device to wait on the sliport status register for
1451  * the readyness after performing a firmware reset.
1452  *
1453  * Returns:
1454  * zero for success, -EPERM when port does not have privilege to perform the
1455  * reset, -EIO when port timeout from recovering from the reset.
1456  *
1457  * Note:
1458  * As the caller will interpret the return code by value, be careful in making
1459  * change or addition to return codes.
1460  **/
1461 int
1462 lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba)
1463 {
1464         struct lpfc_register portstat_reg = {0};
1465         int i;
1466
1467         msleep(100);
1468         if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
1469                        &portstat_reg.word0))
1470                 return -EIO;
1471
1472         /* verify if privileged for the request operation */
1473         if (!bf_get(lpfc_sliport_status_rn, &portstat_reg) &&
1474             !bf_get(lpfc_sliport_status_err, &portstat_reg))
1475                 return -EPERM;
1476
1477         /* wait for the SLI port firmware ready after firmware reset */
1478         for (i = 0; i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT; i++) {
1479                 msleep(10);
1480                 if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
1481                                &portstat_reg.word0))
1482                         continue;
1483                 if (!bf_get(lpfc_sliport_status_err, &portstat_reg))
1484                         continue;
1485                 if (!bf_get(lpfc_sliport_status_rn, &portstat_reg))
1486                         continue;
1487                 if (!bf_get(lpfc_sliport_status_rdy, &portstat_reg))
1488                         continue;
1489                 break;
1490         }
1491
1492         if (i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT)
1493                 return 0;
1494         else
1495                 return -EIO;
1496 }
1497
1498 /**
1499  * lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc
1500  * @phba: lpfc_hba pointer.
1501  * @opcode: The sli4 config command opcode.
1502  *
1503  * Description:
1504  * Request SLI4 interface type-2 device to perform a physical register set
1505  * access.
1506  *
1507  * Returns:
1508  * zero for success
1509  **/
1510 static ssize_t
1511 lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
1512 {
1513         struct completion online_compl;
1514         struct pci_dev *pdev = phba->pcidev;
1515         uint32_t before_fc_flag;
1516         uint32_t sriov_nr_virtfn;
1517         uint32_t reg_val;
1518         int status = 0, rc = 0;
1519         int job_posted = 1, sriov_err;
1520
1521         if (!phba->cfg_enable_hba_reset)
1522                 return -EACCES;
1523
1524         if ((phba->sli_rev < LPFC_SLI_REV4) ||
1525             (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
1526              LPFC_SLI_INTF_IF_TYPE_2))
1527                 return -EPERM;
1528
1529         /* Keep state if we need to restore back */
1530         before_fc_flag = phba->pport->fc_flag;
1531         sriov_nr_virtfn = phba->cfg_sriov_nr_virtfn;
1532
1533         /* Disable SR-IOV virtual functions if enabled */
1534         if (phba->cfg_sriov_nr_virtfn) {
1535                 pci_disable_sriov(pdev);
1536                 phba->cfg_sriov_nr_virtfn = 0;
1537         }
1538
1539         if (opcode == LPFC_FW_DUMP)
1540                 phba->hba_flag |= HBA_FW_DUMP_OP;
1541
1542         status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
1543
1544         if (status != 0) {
1545                 phba->hba_flag &= ~HBA_FW_DUMP_OP;
1546                 return status;
1547         }
1548
1549         /* wait for the device to be quiesced before firmware reset */
1550         msleep(100);
1551
1552         reg_val = readl(phba->sli4_hba.conf_regs_memmap_p +
1553                         LPFC_CTL_PDEV_CTL_OFFSET);
1554
1555         if (opcode == LPFC_FW_DUMP)
1556                 reg_val |= LPFC_FW_DUMP_REQUEST;
1557         else if (opcode == LPFC_FW_RESET)
1558                 reg_val |= LPFC_CTL_PDEV_CTL_FRST;
1559         else if (opcode == LPFC_DV_RESET)
1560                 reg_val |= LPFC_CTL_PDEV_CTL_DRST;
1561
1562         writel(reg_val, phba->sli4_hba.conf_regs_memmap_p +
1563                LPFC_CTL_PDEV_CTL_OFFSET);
1564         /* flush */
1565         readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET);
1566
1567         /* delay driver action following IF_TYPE_2 reset */
1568         rc = lpfc_sli4_pdev_status_reg_wait(phba);
1569
1570         if (rc == -EPERM) {
1571                 /* no privilege for reset */
1572                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
1573                                 "3150 No privilege to perform the requested "
1574                                 "access: x%x\n", reg_val);
1575         } else if (rc == -EIO) {
1576                 /* reset failed, there is nothing more we can do */
1577                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
1578                                 "3153 Fail to perform the requested "
1579                                 "access: x%x\n", reg_val);
1580                 return rc;
1581         }
1582
1583         /* keep the original port state */
1584         if (before_fc_flag & FC_OFFLINE_MODE)
1585                 goto out;
1586
1587         init_completion(&online_compl);
1588         job_posted = lpfc_workq_post_event(phba, &status, &online_compl,
1589                                            LPFC_EVT_ONLINE);
1590         if (!job_posted)
1591                 goto out;
1592
1593         wait_for_completion(&online_compl);
1594
1595 out:
1596         /* in any case, restore the virtual functions enabled as before */
1597         if (sriov_nr_virtfn) {
1598                 sriov_err =
1599                         lpfc_sli_probe_sriov_nr_virtfn(phba, sriov_nr_virtfn);
1600                 if (!sriov_err)
1601                         phba->cfg_sriov_nr_virtfn = sriov_nr_virtfn;
1602         }
1603
1604         /* return proper error code */
1605         if (!rc) {
1606                 if (!job_posted)
1607                         rc = -ENOMEM;
1608                 else if (status)
1609                         rc = -EIO;
1610         }
1611         return rc;
1612 }
1613
1614 /**
1615  * lpfc_nport_evt_cnt_show - Return the number of nport events
1616  * @dev: class device that is converted into a Scsi_host.
1617  * @attr: device attribute, not used.
1618  * @buf: on return contains the ascii number of nport events.
1619  *
1620  * Returns: size of formatted string.
1621  **/
1622 static ssize_t
1623 lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr,
1624                         char *buf)
1625 {
1626         struct Scsi_Host  *shost = class_to_shost(dev);
1627         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1628         struct lpfc_hba   *phba = vport->phba;
1629
1630         return scnprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt);
1631 }
1632
1633 static int
1634 lpfc_set_trunking(struct lpfc_hba *phba, char *buff_out)
1635 {
1636         LPFC_MBOXQ_t *mbox = NULL;
1637         unsigned long val = 0;
1638         char *pval = NULL;
1639         int rc = 0;
1640
1641         if (!strncmp("enable", buff_out,
1642                                  strlen("enable"))) {
1643                 pval = buff_out + strlen("enable") + 1;
1644                 rc = kstrtoul(pval, 0, &val);
1645                 if (rc)
1646                         return rc; /* Invalid  number */
1647         } else if (!strncmp("disable", buff_out,
1648                                  strlen("disable"))) {
1649                 val = 0;
1650         } else {
1651                 return -EINVAL;  /* Invalid command */
1652         }
1653
1654         switch (val) {
1655         case 0:
1656                 val = 0x0; /* Disable */
1657                 break;
1658         case 2:
1659                 val = 0x1; /* Enable two port trunk */
1660                 break;
1661         case 4:
1662                 val = 0x2; /* Enable four port trunk */
1663                 break;
1664         default:
1665                 return -EINVAL;
1666         }
1667
1668         lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
1669                         "0070 Set trunk mode with val %ld ", val);
1670
1671         mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
1672         if (!mbox)
1673                 return -ENOMEM;
1674
1675         lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
1676                          LPFC_MBOX_OPCODE_FCOE_FC_SET_TRUNK_MODE,
1677                          12, LPFC_SLI4_MBX_EMBED);
1678
1679         bf_set(lpfc_mbx_set_trunk_mode,
1680                &mbox->u.mqe.un.set_trunk_mode,
1681                val);
1682         rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
1683         if (rc)
1684                 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
1685                                 "0071 Set trunk mode failed with status: %d",
1686                                 rc);
1687         mempool_free(mbox, phba->mbox_mem_pool);
1688
1689         return 0;
1690 }
1691
1692 /**
1693  * lpfc_board_mode_show - Return the state of the board
1694  * @dev: class device that is converted into a Scsi_host.
1695  * @attr: device attribute, not used.
1696  * @buf: on return contains the state of the adapter.
1697  *
1698  * Returns: size of formatted string.
1699  **/
1700 static ssize_t
1701 lpfc_board_mode_show(struct device *dev, struct device_attribute *attr,
1702                      char *buf)
1703 {
1704         struct Scsi_Host  *shost = class_to_shost(dev);
1705         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1706         struct lpfc_hba   *phba = vport->phba;
1707         char  * state;
1708
1709         if (phba->link_state == LPFC_HBA_ERROR)
1710                 state = "error";
1711         else if (phba->link_state == LPFC_WARM_START)
1712                 state = "warm start";
1713         else if (phba->link_state == LPFC_INIT_START)
1714                 state = "offline";
1715         else
1716                 state = "online";
1717
1718         return scnprintf(buf, PAGE_SIZE, "%s\n", state);
1719 }
1720
1721 /**
1722  * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state
1723  * @dev: class device that is converted into a Scsi_host.
1724  * @attr: device attribute, not used.
1725  * @buf: containing one of the strings "online", "offline", "warm" or "error".
1726  * @count: unused variable.
1727  *
1728  * Returns:
1729  * -EACCES if enable hba reset not enabled
1730  * -EINVAL if the buffer does not contain a valid string (see above)
1731  * -EIO if lpfc_workq_post_event() or lpfc_do_offline() fails
1732  * buf length greater than zero indicates success
1733  **/
1734 static ssize_t
1735 lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
1736                       const char *buf, size_t count)
1737 {
1738         struct Scsi_Host  *shost = class_to_shost(dev);
1739         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1740         struct lpfc_hba   *phba = vport->phba;
1741         struct completion online_compl;
1742         char *board_mode_str = NULL;
1743         int status = 0;
1744         int rc;
1745
1746         if (!phba->cfg_enable_hba_reset) {
1747                 status = -EACCES;
1748                 goto board_mode_out;
1749         }
1750
1751         lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
1752                          "3050 lpfc_board_mode set to %s\n", buf);
1753
1754         init_completion(&online_compl);
1755
1756         if(strncmp(buf, "online", sizeof("online") - 1) == 0) {
1757                 rc = lpfc_workq_post_event(phba, &status, &online_compl,
1758                                       LPFC_EVT_ONLINE);
1759                 if (rc == 0) {
1760                         status = -ENOMEM;
1761                         goto board_mode_out;
1762                 }
1763                 wait_for_completion(&online_compl);
1764                 if (status)
1765                         status = -EIO;
1766         } else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
1767                 status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
1768         else if (strncmp(buf, "warm", sizeof("warm") - 1) == 0)
1769                 if (phba->sli_rev == LPFC_SLI_REV4)
1770                         status = -EINVAL;
1771                 else
1772                         status = lpfc_do_offline(phba, LPFC_EVT_WARM_START);
1773         else if (strncmp(buf, "error", sizeof("error") - 1) == 0)
1774                 if (phba->sli_rev == LPFC_SLI_REV4)
1775                         status = -EINVAL;
1776                 else
1777                         status = lpfc_do_offline(phba, LPFC_EVT_KILL);
1778         else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0)
1779                 status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_DUMP);
1780         else if (strncmp(buf, "fw_reset", sizeof("fw_reset") - 1) == 0)
1781                 status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET);
1782         else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0)
1783                 status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET);
1784         else if (strncmp(buf, "pci_bus_reset", sizeof("pci_bus_reset") - 1)
1785                  == 0)
1786                 status = lpfc_reset_pci_bus(phba);
1787         else if (strncmp(buf, "heartbeat", sizeof("heartbeat") - 1) == 0)
1788                 lpfc_issue_hb_tmo(phba);
1789         else if (strncmp(buf, "trunk", sizeof("trunk") - 1) == 0)
1790                 status = lpfc_set_trunking(phba, (char *)buf + sizeof("trunk"));
1791         else
1792                 status = -EINVAL;
1793
1794 board_mode_out:
1795         if (!status)
1796                 return strlen(buf);
1797         else {
1798                 board_mode_str = strchr(buf, '\n');
1799                 if (board_mode_str)
1800                         *board_mode_str = '\0';
1801                 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
1802                                  "3097 Failed \"%s\", status(%d), "
1803                                  "fc_flag(x%x)\n",
1804                                  buf, status, phba->pport->fc_flag);
1805                 return status;
1806         }
1807 }
1808
1809 /**
1810  * lpfc_get_hba_info - Return various bits of informaton about the adapter
1811  * @phba: pointer to the adapter structure.
1812  * @mxri: max xri count.
1813  * @axri: available xri count.
1814  * @mrpi: max rpi count.
1815  * @arpi: available rpi count.
1816  * @mvpi: max vpi count.
1817  * @avpi: available vpi count.
1818  *
1819  * Description:
1820  * If an integer pointer for an count is not null then the value for the
1821  * count is returned.
1822  *
1823  * Returns:
1824  * zero on error
1825  * one for success
1826  **/
1827 static int
1828 lpfc_get_hba_info(struct lpfc_hba *phba,
1829                   uint32_t *mxri, uint32_t *axri,
1830                   uint32_t *mrpi, uint32_t *arpi,
1831                   uint32_t *mvpi, uint32_t *avpi)
1832 {
1833         struct lpfc_mbx_read_config *rd_config;
1834         LPFC_MBOXQ_t *pmboxq;
1835         MAILBOX_t *pmb;
1836         int rc = 0;
1837         uint32_t max_vpi;
1838
1839         /*
1840          * prevent udev from issuing mailbox commands until the port is
1841          * configured.
1842          */
1843         if (phba->link_state < LPFC_LINK_DOWN ||
1844             !phba->mbox_mem_pool ||
1845             (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
1846                 return 0;
1847
1848         if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
1849                 return 0;
1850
1851         pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
1852         if (!pmboxq)
1853                 return 0;
1854         memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
1855
1856         pmb = &pmboxq->u.mb;
1857         pmb->mbxCommand = MBX_READ_CONFIG;
1858         pmb->mbxOwner = OWN_HOST;
1859         pmboxq->ctx_buf = NULL;
1860
1861         if (phba->pport->fc_flag & FC_OFFLINE_MODE)
1862                 rc = MBX_NOT_FINISHED;
1863         else
1864                 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
1865
1866         if (rc != MBX_SUCCESS) {
1867                 if (rc != MBX_TIMEOUT)
1868                         mempool_free(pmboxq, phba->mbox_mem_pool);
1869                 return 0;
1870         }
1871
1872         if (phba->sli_rev == LPFC_SLI_REV4) {
1873                 rd_config = &pmboxq->u.mqe.un.rd_config;
1874                 if (mrpi)
1875                         *mrpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
1876                 if (arpi)
1877                         *arpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config) -
1878                                         phba->sli4_hba.max_cfg_param.rpi_used;
1879                 if (mxri)
1880                         *mxri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
1881                 if (axri)
1882                         *axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) -
1883                                         phba->sli4_hba.max_cfg_param.xri_used;
1884
1885                 /* Account for differences with SLI-3.  Get vpi count from
1886                  * mailbox data and subtract one for max vpi value.
1887                  */
1888                 max_vpi = (bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) > 0) ?
1889                         (bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) - 1) : 0;
1890
1891                 /* Limit the max we support */
1892                 if (max_vpi > LPFC_MAX_VPI)
1893                         max_vpi = LPFC_MAX_VPI;
1894                 if (mvpi)
1895                         *mvpi = max_vpi;
1896                 if (avpi)
1897                         *avpi = max_vpi - phba->sli4_hba.max_cfg_param.vpi_used;
1898         } else {
1899                 if (mrpi)
1900                         *mrpi = pmb->un.varRdConfig.max_rpi;
1901                 if (arpi)
1902                         *arpi = pmb->un.varRdConfig.avail_rpi;
1903                 if (mxri)
1904                         *mxri = pmb->un.varRdConfig.max_xri;
1905                 if (axri)
1906                         *axri = pmb->un.varRdConfig.avail_xri;
1907                 if (mvpi)
1908                         *mvpi = pmb->un.varRdConfig.max_vpi;
1909                 if (avpi) {
1910                         /* avail_vpi is only valid if link is up and ready */
1911                         if (phba->link_state == LPFC_HBA_READY)
1912                                 *avpi = pmb->un.varRdConfig.avail_vpi;
1913                         else
1914                                 *avpi = pmb->un.varRdConfig.max_vpi;
1915                 }
1916         }
1917
1918         mempool_free(pmboxq, phba->mbox_mem_pool);
1919         return 1;
1920 }
1921
1922 /**
1923  * lpfc_max_rpi_show - Return maximum rpi
1924  * @dev: class device that is converted into a Scsi_host.
1925  * @attr: device attribute, not used.
1926  * @buf: on return contains the maximum rpi count in decimal or "Unknown".
1927  *
1928  * Description:
1929  * Calls lpfc_get_hba_info() asking for just the mrpi count.
1930  * If lpfc_get_hba_info() returns zero (failure) the buffer text is set
1931  * to "Unknown" and the buffer length is returned, therefore the caller
1932  * must check for "Unknown" in the buffer to detect a failure.
1933  *
1934  * Returns: size of formatted string.
1935  **/
1936 static ssize_t
1937 lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr,
1938                   char *buf)
1939 {
1940         struct Scsi_Host  *shost = class_to_shost(dev);
1941         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1942         struct lpfc_hba   *phba = vport->phba;
1943         uint32_t cnt;
1944
1945         if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, NULL, NULL, NULL))
1946                 return scnprintf(buf, PAGE_SIZE, "%d\n", cnt);
1947         return scnprintf(buf, PAGE_SIZE, "Unknown\n");
1948 }
1949
1950 /**
1951  * lpfc_used_rpi_show - Return maximum rpi minus available rpi
1952  * @dev: class device that is converted into a Scsi_host.
1953  * @attr: device attribute, not used.
1954  * @buf: containing the used rpi count in decimal or "Unknown".
1955  *
1956  * Description:
1957  * Calls lpfc_get_hba_info() asking for just the mrpi and arpi counts.
1958  * If lpfc_get_hba_info() returns zero (failure) the buffer text is set
1959  * to "Unknown" and the buffer length is returned, therefore the caller
1960  * must check for "Unknown" in the buffer to detect a failure.
1961  *
1962  * Returns: size of formatted string.
1963  **/
1964 static ssize_t
1965 lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr,
1966                    char *buf)
1967 {
1968         struct Scsi_Host  *shost = class_to_shost(dev);
1969         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1970         struct lpfc_hba   *phba = vport->phba;
1971         uint32_t cnt, acnt;
1972
1973         if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, &acnt, NULL, NULL))
1974                 return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
1975         return scnprintf(buf, PAGE_SIZE, "Unknown\n");
1976 }
1977
1978 /**
1979  * lpfc_max_xri_show - Return maximum xri
1980  * @dev: class device that is converted into a Scsi_host.
1981  * @attr: device attribute, not used.
1982  * @buf: on return contains the maximum xri count in decimal or "Unknown".
1983  *
1984  * Description:
1985  * Calls lpfc_get_hba_info() asking for just the mrpi count.
1986  * If lpfc_get_hba_info() returns zero (failure) the buffer text is set
1987  * to "Unknown" and the buffer length is returned, therefore the caller
1988  * must check for "Unknown" in the buffer to detect a failure.
1989  *
1990  * Returns: size of formatted string.
1991  **/
1992 static ssize_t
1993 lpfc_max_xri_show(struct device *dev, struct device_attribute *attr,
1994                   char *buf)
1995 {
1996         struct Scsi_Host  *shost = class_to_shost(dev);
1997         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1998         struct lpfc_hba   *phba = vport->phba;
1999         uint32_t cnt;
2000
2001         if (lpfc_get_hba_info(phba, &cnt, NULL, NULL, NULL, NULL, NULL))
2002                 return scnprintf(buf, PAGE_SIZE, "%d\n", cnt);
2003         return scnprintf(buf, PAGE_SIZE, "Unknown\n");
2004 }
2005
2006 /**
2007  * lpfc_used_xri_show - Return maximum xpi minus the available xpi
2008  * @dev: class device that is converted into a Scsi_host.
2009  * @attr: device attribute, not used.
2010  * @buf: on return contains the used xri count in decimal or "Unknown".
2011  *
2012  * Description:
2013  * Calls lpfc_get_hba_info() asking for just the mxri and axri counts.
2014  * If lpfc_get_hba_info() returns zero (failure) the buffer text is set
2015  * to "Unknown" and the buffer length is returned, therefore the caller
2016  * must check for "Unknown" in the buffer to detect a failure.
2017  *
2018  * Returns: size of formatted string.
2019  **/
2020 static ssize_t
2021 lpfc_used_xri_show(struct device *dev, struct device_attribute *attr,
2022                    char *buf)
2023 {
2024         struct Scsi_Host  *shost = class_to_shost(dev);
2025         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
2026         struct lpfc_hba   *phba = vport->phba;
2027         uint32_t cnt, acnt;
2028
2029         if (lpfc_get_hba_info(phba, &cnt, &acnt, NULL, NULL, NULL, NULL))
2030                 return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
2031         return scnprintf(buf, PAGE_SIZE, "Unknown\n");
2032 }
2033
2034 /**
2035  * lpfc_max_vpi_show - Return maximum vpi
2036  * @dev: class device that is converted into a Scsi_host.
2037  * @attr: device attribute, not used.
2038  * @buf: on return contains the maximum vpi count in decimal or "Unknown".
2039  *
2040  * Description:
2041  * Calls lpfc_get_hba_info() asking for just the mvpi count.
2042  * If lpfc_get_hba_info() returns zero (failure) the buffer text is set
2043  * to "Unknown" and the buffer length is returned, therefore the caller
2044  * must check for "Unknown" in the buffer to detect a failure.
2045  *
2046  * Returns: size of formatted string.
2047  **/
2048 static ssize_t
2049 lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr,
2050                   char *buf)
2051 {
2052         struct Scsi_Host  *shost = class_to_shost(dev);
2053         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
2054         struct lpfc_hba   *phba = vport->phba;
2055         uint32_t cnt;
2056
2057         if (lpfc_get_hba_info(phba, NULL, NULL, NULL, NULL, &cnt, NULL))
2058                 return scnprintf(buf, PAGE_SIZE, "%d\n", cnt);
2059         return scnprintf(buf, PAGE_SIZE, "Unknown\n");
2060 }
2061
2062 /**
2063  * lpfc_used_vpi_show - Return maximum vpi minus the available vpi
2064  * @dev: class device that is converted into a Scsi_host.
2065  * @attr: device attribute, not used.
2066  * @buf: on return contains the used vpi count in decimal or "Unknown".
2067  *
2068  * Description:
2069  * Calls lpfc_get_hba_info() asking for just the mvpi and avpi counts.
2070  * If lpfc_get_hba_info() returns zero (failure) the buffer text is set
2071  * to "Unknown" and the buffer length is returned, therefore the caller
2072  * must check for "Unknown" in the buffer to detect a failure.
2073  *
2074  * Returns: size of formatted string.
2075  **/
2076 static ssize_t
2077 lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr,
2078                    char *buf)
2079 {
2080         struct Scsi_Host  *shost = class_to_shost(dev);
2081         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
2082         struct lpfc_hba   *phba = vport->phba;
2083         uint32_t cnt, acnt;
2084
2085         if (lpfc_get_hba_info(phba, NULL, NULL, NULL, NULL, &cnt, &acnt))
2086                 return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
2087         return scnprintf(buf, PAGE_SIZE, "Unknown\n");
2088 }
2089
2090 /**
2091  * lpfc_npiv_info_show - Return text about NPIV support for the adapter
2092  * @dev: class device that is converted into a Scsi_host.
2093  * @attr: device attribute, not used.
2094  * @buf: text that must be interpreted to determine if npiv is supported.
2095  *
2096  * Description:
2097  * Buffer will contain text indicating npiv is not suppoerted on the port,
2098  * the port is an NPIV physical port, or it is an npiv virtual port with
2099  * the id of the vport.
2100  *
2101  * Returns: size of formatted string.
2102  **/
2103 static ssize_t
2104 lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr,
2105                     char *buf)
2106 {
2107         struct Scsi_Host  *shost = class_to_shost(dev);
2108         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
2109         struct lpfc_hba   *phba = vport->phba;
2110
2111         if (!(phba->max_vpi))
2112                 return scnprintf(buf, PAGE_SIZE, "NPIV Not Supported\n");
2113         if (vport->port_type == LPFC_PHYSICAL_PORT)
2114                 return scnprintf(buf, PAGE_SIZE, "NPIV Physical\n");
2115         return scnprintf(buf, PAGE_SIZE, "NPIV Virtual (VPI %d)\n", vport->vpi);
2116 }
2117
2118 /**
2119  * lpfc_poll_show - Return text about poll support for the adapter
2120  * @dev: class device that is converted into a Scsi_host.
2121  * @attr: device attribute, not used.
2122  * @buf: on return contains the cfg_poll in hex.
2123  *
2124  * Notes:
2125  * cfg_poll should be a lpfc_polling_flags type.
2126  *
2127  * Returns: size of formatted string.
2128  **/
2129 static ssize_t
2130 lpfc_poll_show(struct device *dev, struct device_attribute *attr,
2131                char *buf)
2132 {
2133         struct Scsi_Host  *shost = class_to_shost(dev);
2134         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
2135         struct lpfc_hba   *phba = vport->phba;
2136
2137         return scnprintf(buf, PAGE_SIZE, "%#x\n", phba->cfg_poll);
2138 }
2139
2140 /**
2141  * lpfc_poll_store - Set the value of cfg_poll for the adapter
2142  * @dev: class device that is converted into a Scsi_host.
2143  * @attr: device attribute, not used.
2144  * @buf: one or more lpfc_polling_flags values.
2145  * @count: not used.
2146  *
2147  * Notes:
2148  * buf contents converted to integer and checked for a valid value.
2149  *
2150  * Returns:
2151  * -EINVAL if the buffer connot be converted or is out of range
2152  * length of the buf on success
2153  **/
2154 static ssize_t
2155 lpfc_poll_store(struct device *dev, struct device_attribute *attr,
2156                 const char *buf, size_t count)
2157 {
2158         struct Scsi_Host  *shost = class_to_shost(dev);
2159         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
2160         struct lpfc_hba   *phba = vport->phba;
2161         uint32_t creg_val;
2162         uint32_t old_val;
2163         int val=0;
2164
2165         if (!isdigit(buf[0]))
2166                 return -EINVAL;
2167
2168         if (sscanf(buf, "%i", &val) != 1)
2169                 return -EINVAL;
2170
2171         if ((val & 0x3) != val)
2172                 return -EINVAL;
2173
2174         if (phba->sli_rev == LPFC_SLI_REV4)
2175                 val = 0;
2176
2177         lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
2178                 "3051 lpfc_poll changed from %d to %d\n",
2179                 phba->cfg_poll, val);
2180
2181         spin_lock_irq(&phba->hbalock);
2182
2183         old_val = phba->cfg_poll;
2184
2185         if (val & ENABLE_FCP_RING_POLLING) {
2186                 if ((val & DISABLE_FCP_RING_INT) &&
2187                     !(old_val & DISABLE_FCP_RING_INT)) {
2188                         if (lpfc_readl(phba->HCregaddr, &creg_val)) {
2189                                 spin_unlock_irq(&phba->hbalock);
2190                                 return -EINVAL;
2191                         }
2192                         creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING);
2193                         writel(creg_val, phba->HCregaddr);
2194                         readl(phba->HCregaddr); /* flush */
2195
2196                         lpfc_poll_start_timer(phba);
2197                 }
2198         } else if (val != 0x0) {
2199                 spin_unlock_irq(&phba->hbalock);
2200                 return -EINVAL;
2201         }
2202
2203         if (!(val & DISABLE_FCP_RING_INT) &&
2204             (old_val & DISABLE_FCP_RING_INT))
2205         {
2206                 spin_unlock_irq(&phba->hbalock);
2207                 del_timer(&phba->fcp_poll_timer);
2208                 spin_lock_irq(&phba->hbalock);
2209                 if (lpfc_readl(phba->HCregaddr, &creg_val)) {
2210                         spin_unlock_irq(&phba->hbalock);
2211                         return -EINVAL;
2212                 }
2213                 creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
2214                 writel(creg_val, phba->HCregaddr);
2215                 readl(phba->HCregaddr); /* flush */
2216         }
2217
2218         phba->cfg_poll = val;
2219
2220         spin_unlock_irq(&phba->hbalock);
2221
2222         return strlen(buf);
2223 }
2224
2225 /**
2226  * lpfc_sriov_hw_max_virtfn_show - Return maximum number of virtual functions
2227  * @dev: class converted to a Scsi_host structure.
2228  * @attr: device attribute, not used.
2229  * @buf: on return contains the formatted support level.
2230  *
2231  * Description:
2232  * Returns the maximum number of virtual functions a physical function can
2233  * support, 0 will be returned if called on virtual function.
2234  *
2235  * Returns: size of formatted string.
2236  **/
2237 static ssize_t
2238 lpfc_sriov_hw_max_virtfn_show(struct device *dev,
2239                               struct device_attribute *attr,
2240                               char *buf)
2241 {
2242         struct Scsi_Host *shost = class_to_shost(dev);
2243         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
2244         struct lpfc_hba *phba = vport->phba;
2245         uint16_t max_nr_virtfn;
2246
2247         max_nr_virtfn = lpfc_sli_sriov_nr_virtfn_get(phba);
2248         return scnprintf(buf, PAGE_SIZE, "%d\n", max_nr_virtfn);
2249 }
2250
2251 static inline bool lpfc_rangecheck(uint val, uint min, uint max)
2252 {
2253         return val >= min && val <= max;
2254 }
2255
2256 /**
2257  * lpfc_enable_bbcr_set: Sets an attribute value.
2258  * @phba: pointer the the adapter structure.
2259  * @val: integer attribute value.
2260  *
2261  * Description:
2262  * Validates the min and max values then sets the
2263  * adapter config field if in the valid range. prints error message
2264  * and does not set the parameter if invalid.
2265  *
2266  * Returns:
2267  * zero on success
2268  * -EINVAL if val is invalid
2269  */
2270 static ssize_t
2271 lpfc_enable_bbcr_set(struct lpfc_hba *phba, uint val)
2272 {
2273         if (lpfc_rangecheck(val, 0, 1) && phba->sli_rev == LPFC_SLI_REV4) {
2274                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2275                                 "3068 lpfc_enable_bbcr changed from %d to "
2276                                 "%d\n", phba->cfg_enable_bbcr, val);
2277                 phba->cfg_enable_bbcr = val;
2278                 return 0;
2279         }
2280         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2281                         "0451 lpfc_enable_bbcr cannot set to %d, range is 0, "
2282                         "1\n", val);
2283         return -EINVAL;
2284 }
2285
2286 /*
2287  * lpfc_param_show - Return a cfg attribute value in decimal
2288  *
2289  * Description:
2290  * Macro that given an attr e.g. hba_queue_depth expands
2291  * into a function with the name lpfc_hba_queue_depth_show.
2292  *
2293  * lpfc_##attr##_show: Return the decimal value of an adapters cfg_xxx field.
2294  * @dev: class device that is converted into a Scsi_host.
2295  * @attr: device attribute, not used.
2296  * @buf: on return contains the attribute value in decimal.
2297  *
2298  * Returns: size of formatted string.
2299  **/
2300 #define lpfc_param_show(attr)   \
2301 static ssize_t \
2302 lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
2303                    char *buf) \
2304 { \
2305         struct Scsi_Host  *shost = class_to_shost(dev);\
2306         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
2307         struct lpfc_hba   *phba = vport->phba;\
2308         return scnprintf(buf, PAGE_SIZE, "%d\n",\
2309                         phba->cfg_##attr);\
2310 }
2311
2312 /*
2313  * lpfc_param_hex_show - Return a cfg attribute value in hex
2314  *
2315  * Description:
2316  * Macro that given an attr e.g. hba_queue_depth expands
2317  * into a function with the name lpfc_hba_queue_depth_show
2318  *
2319  * lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field.
2320  * @dev: class device that is converted into a Scsi_host.
2321  * @attr: device attribute, not used.
2322  * @buf: on return contains the attribute value in hexadecimal.
2323  *
2324  * Returns: size of formatted string.
2325  **/
2326 #define lpfc_param_hex_show(attr)       \
2327 static ssize_t \
2328 lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
2329                    char *buf) \
2330 { \
2331         struct Scsi_Host  *shost = class_to_shost(dev);\
2332         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
2333         struct lpfc_hba   *phba = vport->phba;\
2334         uint val = 0;\
2335         val = phba->cfg_##attr;\
2336         return scnprintf(buf, PAGE_SIZE, "%#x\n",\
2337                         phba->cfg_##attr);\
2338 }
2339
2340 /*
2341  * lpfc_param_init - Initializes a cfg attribute
2342  *
2343  * Description:
2344  * Macro that given an attr e.g. hba_queue_depth expands
2345  * into a function with the name lpfc_hba_queue_depth_init. The macro also
2346  * takes a default argument, a minimum and maximum argument.
2347  *
2348  * lpfc_##attr##_init: Initializes an attribute.
2349  * @phba: pointer the the adapter structure.
2350  * @val: integer attribute value.
2351  *
2352  * Validates the min and max values then sets the adapter config field
2353  * accordingly, or uses the default if out of range and prints an error message.
2354  *
2355  * Returns:
2356  * zero on success
2357  * -EINVAL if default used
2358  **/
2359 #define lpfc_param_init(attr, default, minval, maxval)  \
2360 static int \
2361 lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
2362 { \
2363         if (lpfc_rangecheck(val, minval, maxval)) {\
2364                 phba->cfg_##attr = val;\
2365                 return 0;\
2366         }\
2367         lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \
2368                         "0449 lpfc_"#attr" attribute cannot be set to %d, "\
2369                         "allowed range is ["#minval", "#maxval"]\n", val); \
2370         phba->cfg_##attr = default;\
2371         return -EINVAL;\
2372 }
2373
2374 /*
2375  * lpfc_param_set - Set a cfg attribute value
2376  *
2377  * Description:
2378  * Macro that given an attr e.g. hba_queue_depth expands
2379  * into a function with the name lpfc_hba_queue_depth_set
2380  *
2381  * lpfc_##attr##_set: Sets an attribute value.
2382  * @phba: pointer the the adapter structure.
2383  * @val: integer attribute value.
2384  *
2385  * Description:
2386  * Validates the min and max values then sets the
2387  * adapter config field if in the valid range. prints error message
2388  * and does not set the parameter if invalid.
2389  *
2390  * Returns:
2391  * zero on success
2392  * -EINVAL if val is invalid
2393  **/
2394 #define lpfc_param_set(attr, default, minval, maxval)   \
2395 static int \
2396 lpfc_##attr##_set(struct lpfc_hba *phba, uint val) \
2397 { \
2398         if (lpfc_rangecheck(val, minval, maxval)) {\
2399                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \
2400                         "3052 lpfc_" #attr " changed from %d to %d\n", \
2401                         phba->cfg_##attr, val); \
2402                 phba->cfg_##attr = val;\
2403                 return 0;\
2404         }\
2405         lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \
2406                         "0450 lpfc_"#attr" attribute cannot be set to %d, "\
2407                         "allowed range is ["#minval", "#maxval"]\n", val); \
2408         return -EINVAL;\
2409 }
2410
2411 /*
2412  * lpfc_param_store - Set a vport attribute value
2413  *
2414  * Description:
2415  * Macro that given an attr e.g. hba_queue_depth expands
2416  * into a function with the name lpfc_hba_queue_depth_store.
2417  *
2418  * lpfc_##attr##_store: Set an sttribute value.
2419  * @dev: class device that is converted into a Scsi_host.
2420  * @attr: device attribute, not used.
2421  * @buf: contains the attribute value in ascii.
2422  * @count: not used.
2423  *
2424  * Description:
2425  * Convert the ascii text number to an integer, then
2426  * use the lpfc_##attr##_set function to set the value.
2427  *
2428  * Returns:
2429  * -EINVAL if val is invalid or lpfc_##attr##_set() fails
2430  * length of buffer upon success.
2431  **/
2432 #define lpfc_param_store(attr)  \
2433 static ssize_t \
2434 lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \
2435                     const char *buf, size_t count) \
2436 { \
2437         struct Scsi_Host  *shost = class_to_shost(dev);\
2438         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
2439         struct lpfc_hba   *phba = vport->phba;\
2440         uint val = 0;\
2441         if (!isdigit(buf[0]))\
2442                 return -EINVAL;\
2443         if (sscanf(buf, "%i", &val) != 1)\
2444                 return -EINVAL;\
2445         if (lpfc_##attr##_set(phba, val) == 0) \
2446                 return strlen(buf);\
2447         else \
2448                 return -EINVAL;\
2449 }
2450
2451 /*
2452  * lpfc_vport_param_show - Return decimal formatted cfg attribute value
2453  *
2454  * Description:
2455  * Macro that given an attr e.g. hba_queue_depth expands
2456  * into a function with the name lpfc_hba_queue_depth_show
2457  *
2458  * lpfc_##attr##_show: prints the attribute value in decimal.
2459  * @dev: class device that is converted into a Scsi_host.
2460  * @attr: device attribute, not used.
2461  * @buf: on return contains the attribute value in decimal.
2462  *
2463  * Returns: length of formatted string.
2464  **/
2465 #define lpfc_vport_param_show(attr)     \
2466 static ssize_t \
2467 lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
2468                    char *buf) \
2469 { \
2470         struct Scsi_Host  *shost = class_to_shost(dev);\
2471         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
2472         return scnprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_##attr);\
2473 }
2474
2475 /*
2476  * lpfc_vport_param_hex_show - Return hex formatted attribute value
2477  *
2478  * Description:
2479  * Macro that given an attr e.g.
2480  * hba_queue_depth expands into a function with the name
2481  * lpfc_hba_queue_depth_show
2482  *
2483  * lpfc_##attr##_show: prints the attribute value in hexadecimal.
2484  * @dev: class device that is converted into a Scsi_host.
2485  * @attr: device attribute, not used.
2486  * @buf: on return contains the attribute value in hexadecimal.
2487  *
2488  * Returns: length of formatted string.
2489  **/
2490 #define lpfc_vport_param_hex_show(attr) \
2491 static ssize_t \
2492 lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
2493                    char *buf) \
2494 { \
2495         struct Scsi_Host  *shost = class_to_shost(dev);\
2496         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
2497         return scnprintf(buf, PAGE_SIZE, "%#x\n", vport->cfg_##attr);\
2498 }
2499
2500 /*
2501  * lpfc_vport_param_init - Initialize a vport cfg attribute
2502  *
2503  * Description:
2504  * Macro that given an attr e.g. hba_queue_depth expands
2505  * into a function with the name lpfc_hba_queue_depth_init. The macro also
2506  * takes a default argument, a minimum and maximum argument.
2507  *
2508  * lpfc_##attr##_init: validates the min and max values then sets the
2509  * adapter config field accordingly, or uses the default if out of range
2510  * and prints an error message.
2511  * @phba: pointer the the adapter structure.
2512  * @val: integer attribute value.
2513  *
2514  * Returns:
2515  * zero on success
2516  * -EINVAL if default used
2517  **/
2518 #define lpfc_vport_param_init(attr, default, minval, maxval)    \
2519 static int \
2520 lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
2521 { \
2522         if (lpfc_rangecheck(val, minval, maxval)) {\
2523                 vport->cfg_##attr = val;\
2524                 return 0;\
2525         }\
2526         lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \
2527                          "0423 lpfc_"#attr" attribute cannot be set to %d, "\
2528                          "allowed range is ["#minval", "#maxval"]\n", val); \
2529         vport->cfg_##attr = default;\
2530         return -EINVAL;\
2531 }
2532
2533 /*
2534  * lpfc_vport_param_set - Set a vport cfg attribute
2535  *
2536  * Description:
2537  * Macro that given an attr e.g. hba_queue_depth expands
2538  * into a function with the name lpfc_hba_queue_depth_set
2539  *
2540  * lpfc_##attr##_set: validates the min and max values then sets the
2541  * adapter config field if in the valid range. prints error message
2542  * and does not set the parameter if invalid.
2543  * @phba: pointer the the adapter structure.
2544  * @val:        integer attribute value.
2545  *
2546  * Returns:
2547  * zero on success
2548  * -EINVAL if val is invalid
2549  **/
2550 #define lpfc_vport_param_set(attr, default, minval, maxval)     \
2551 static int \
2552 lpfc_##attr##_set(struct lpfc_vport *vport, uint val) \
2553 { \
2554         if (lpfc_rangecheck(val, minval, maxval)) {\
2555                 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \
2556                         "3053 lpfc_" #attr \
2557                         " changed from %d (x%x) to %d (x%x)\n", \
2558                         vport->cfg_##attr, vport->cfg_##attr, \
2559                         val, val); \
2560                 vport->cfg_##attr = val;\
2561                 return 0;\
2562         }\
2563         lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \
2564                          "0424 lpfc_"#attr" attribute cannot be set to %d, "\
2565                          "allowed range is ["#minval", "#maxval"]\n", val); \
2566         return -EINVAL;\
2567 }
2568
2569 /*
2570  * lpfc_vport_param_store - Set a vport attribute
2571  *
2572  * Description:
2573  * Macro that given an attr e.g. hba_queue_depth
2574  * expands into a function with the name lpfc_hba_queue_depth_store
2575  *
2576  * lpfc_##attr##_store: convert the ascii text number to an integer, then
2577  * use the lpfc_##attr##_set function to set the value.
2578  * @cdev: class device that is converted into a Scsi_host.
2579  * @buf:        contains the attribute value in decimal.
2580  * @count: not used.
2581  *
2582  * Returns:
2583  * -EINVAL if val is invalid or lpfc_##attr##_set() fails
2584  * length of buffer upon success.
2585  **/
2586 #define lpfc_vport_param_store(attr)    \
2587 static ssize_t \
2588 lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \
2589                     const char *buf, size_t count) \
2590 { \
2591         struct Scsi_Host  *shost = class_to_shost(dev);\
2592         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
2593         uint val = 0;\
2594         if (!isdigit(buf[0]))\
2595                 return -EINVAL;\
2596         if (sscanf(buf, "%i", &val) != 1)\
2597                 return -EINVAL;\
2598         if (lpfc_##attr##_set(vport, val) == 0) \
2599                 return strlen(buf);\
2600         else \
2601                 return -EINVAL;\
2602 }
2603
2604
2605 static DEVICE_ATTR(nvme_info, 0444, lpfc_nvme_info_show, NULL);
2606 static DEVICE_ATTR(scsi_stat, 0444, lpfc_scsi_stat_show, NULL);
2607 static DEVICE_ATTR(bg_info, S_IRUGO, lpfc_bg_info_show, NULL);
2608 static DEVICE_ATTR(bg_guard_err, S_IRUGO, lpfc_bg_guard_err_show, NULL);
2609 static DEVICE_ATTR(bg_apptag_err, S_IRUGO, lpfc_bg_apptag_err_show, NULL);
2610 static DEVICE_ATTR(bg_reftag_err, S_IRUGO, lpfc_bg_reftag_err_show, NULL);
2611 static DEVICE_ATTR(info, S_IRUGO, lpfc_info_show, NULL);
2612 static DEVICE_ATTR(serialnum, S_IRUGO, lpfc_serialnum_show, NULL);
2613 static DEVICE_ATTR(modeldesc, S_IRUGO, lpfc_modeldesc_show, NULL);
2614 static DEVICE_ATTR(modelname, S_IRUGO, lpfc_modelname_show, NULL);
2615 static DEVICE_ATTR(programtype, S_IRUGO, lpfc_programtype_show, NULL);
2616 static DEVICE_ATTR(portnum, S_IRUGO, lpfc_vportnum_show, NULL);
2617 static DEVICE_ATTR(fwrev, S_IRUGO, lpfc_fwrev_show, NULL);
2618 static DEVICE_ATTR(hdw, S_IRUGO, lpfc_hdw_show, NULL);
2619 static DEVICE_ATTR(link_state, S_IRUGO | S_IWUSR, lpfc_link_state_show,
2620                 lpfc_link_state_store);
2621 static DEVICE_ATTR(option_rom_version, S_IRUGO,
2622                    lpfc_option_rom_version_show, NULL);
2623 static DEVICE_ATTR(num_discovered_ports, S_IRUGO,
2624                    lpfc_num_discovered_ports_show, NULL);
2625 static DEVICE_ATTR(menlo_mgmt_mode, S_IRUGO, lpfc_mlomgmt_show, NULL);
2626 static DEVICE_ATTR(nport_evt_cnt, S_IRUGO, lpfc_nport_evt_cnt_show, NULL);
2627 static DEVICE_ATTR_RO(lpfc_drvr_version);
2628 static DEVICE_ATTR_RO(lpfc_enable_fip);
2629 static DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR,
2630                    lpfc_board_mode_show, lpfc_board_mode_store);
2631 static DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset);
2632 static DEVICE_ATTR(max_vpi, S_IRUGO, lpfc_max_vpi_show, NULL);
2633 static DEVICE_ATTR(used_vpi, S_IRUGO, lpfc_used_vpi_show, NULL);
2634 static DEVICE_ATTR(max_rpi, S_IRUGO, lpfc_max_rpi_show, NULL);
2635 static DEVICE_ATTR(used_rpi, S_IRUGO, lpfc_used_rpi_show, NULL);
2636 static DEVICE_ATTR(max_xri, S_IRUGO, lpfc_max_xri_show, NULL);
2637 static DEVICE_ATTR(used_xri, S_IRUGO, lpfc_used_xri_show, NULL);
2638 static DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL);
2639 static DEVICE_ATTR_RO(lpfc_temp_sensor);
2640 static DEVICE_ATTR_RO(lpfc_sriov_hw_max_virtfn);
2641 static DEVICE_ATTR(protocol, S_IRUGO, lpfc_sli4_protocol_show, NULL);
2642 static DEVICE_ATTR(lpfc_xlane_supported, S_IRUGO, lpfc_oas_supported_show,
2643                    NULL);
2644
2645 static char *lpfc_soft_wwn_key = "C99G71SL8032A";
2646 #define WWN_SZ 8
2647 /**
2648  * lpfc_wwn_set - Convert string to the 8 byte WWN value.
2649  * @buf: WWN string.
2650  * @cnt: Length of string.
2651  * @wwn: Array to receive converted wwn value.
2652  *
2653  * Returns:
2654  * -EINVAL if the buffer does not contain a valid wwn
2655  * 0 success
2656  **/
2657 static size_t
2658 lpfc_wwn_set(const char *buf, size_t cnt, char wwn[])
2659 {
2660         unsigned int i, j;
2661
2662         /* Count may include a LF at end of string */
2663         if (buf[cnt-1] == '\n')
2664                 cnt--;
2665
2666         if ((cnt < 16) || (cnt > 18) || ((cnt == 17) && (*buf++ != 'x')) ||
2667             ((cnt == 18) && ((*buf++ != '0') || (*buf++ != 'x'))))
2668                 return -EINVAL;
2669
2670         memset(wwn, 0, WWN_SZ);
2671
2672         /* Validate and store the new name */
2673         for (i = 0, j = 0; i < 16; i++) {
2674                 if ((*buf >= 'a') && (*buf <= 'f'))
2675                         j = ((j << 4) | ((*buf++ - 'a') + 10));
2676                 else if ((*buf >= 'A') && (*buf <= 'F'))
2677                         j = ((j << 4) | ((*buf++ - 'A') + 10));
2678                 else if ((*buf >= '0') && (*buf <= '9'))
2679                         j = ((j << 4) | (*buf++ - '0'));
2680                 else
2681                         return -EINVAL;
2682                 if (i % 2) {
2683                         wwn[i/2] = j & 0xff;
2684                         j = 0;
2685                 }
2686         }
2687         return 0;
2688 }
2689 /**
2690  * lpfc_soft_wwn_enable_store - Allows setting of the wwn if the key is valid
2691  * @dev: class device that is converted into a Scsi_host.
2692  * @attr: device attribute, not used.
2693  * @buf: containing the string lpfc_soft_wwn_key.
2694  * @count: must be size of lpfc_soft_wwn_key.
2695  *
2696  * Returns:
2697  * -EINVAL if the buffer does not contain lpfc_soft_wwn_key
2698  * length of buf indicates success
2699  **/
2700 static ssize_t
2701 lpfc_soft_wwn_enable_store(struct device *dev, struct device_attribute *attr,
2702                            const char *buf, size_t count)
2703 {
2704         struct Scsi_Host  *shost = class_to_shost(dev);
2705         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
2706         struct lpfc_hba   *phba = vport->phba;
2707         unsigned int cnt = count;
2708         uint8_t vvvl = vport->fc_sparam.cmn.valid_vendor_ver_level;
2709         u32 *fawwpn_key = (uint32_t *)&vport->fc_sparam.un.vendorVersion[0];
2710
2711         /*
2712          * We're doing a simple sanity check for soft_wwpn setting.
2713          * We require that the user write a specific key to enable
2714          * the soft_wwpn attribute to be settable. Once the attribute
2715          * is written, the enable key resets. If further updates are
2716          * desired, the key must be written again to re-enable the
2717          * attribute.
2718          *
2719          * The "key" is not secret - it is a hardcoded string shown
2720          * here. The intent is to protect against the random user or
2721          * application that is just writing attributes.
2722          */
2723         if (vvvl == 1 && cpu_to_be32(*fawwpn_key) == FAPWWN_KEY_VENDOR) {
2724                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2725                                 "0051 lpfc soft wwpn can not be enabled: "
2726                                 "fawwpn is enabled\n");
2727                 return -EINVAL;
2728         }
2729
2730         /* count may include a LF at end of string */
2731         if (buf[cnt-1] == '\n')
2732                 cnt--;
2733
2734         if ((cnt != strlen(lpfc_soft_wwn_key)) ||
2735             (strncmp(buf, lpfc_soft_wwn_key, strlen(lpfc_soft_wwn_key)) != 0))
2736                 return -EINVAL;
2737
2738         phba->soft_wwn_enable = 1;
2739
2740         dev_printk(KERN_WARNING, &phba->pcidev->dev,
2741                    "lpfc%d: soft_wwpn assignment has been enabled.\n",
2742                    phba->brd_no);
2743         dev_printk(KERN_WARNING, &phba->pcidev->dev,
2744                    "  The soft_wwpn feature is not supported by Broadcom.");
2745
2746         return count;
2747 }
2748 static DEVICE_ATTR_WO(lpfc_soft_wwn_enable);
2749
2750 /**
2751  * lpfc_soft_wwpn_show - Return the cfg soft ww port name of the adapter
2752  * @dev: class device that is converted into a Scsi_host.
2753  * @attr: device attribute, not used.
2754  * @buf: on return contains the wwpn in hexadecimal.
2755  *
2756  * Returns: size of formatted string.
2757  **/
2758 static ssize_t
2759 lpfc_soft_wwpn_show(struct device *dev, struct device_attribute *attr,
2760                     char *buf)
2761 {
2762         struct Scsi_Host  *shost = class_to_shost(dev);
2763         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
2764         struct lpfc_hba   *phba = vport->phba;
2765
2766         return scnprintf(buf, PAGE_SIZE, "0x%llx\n",
2767                         (unsigned long long)phba->cfg_soft_wwpn);
2768 }
2769
2770 /**
2771  * lpfc_soft_wwpn_store - Set the ww port name of the adapter
2772  * @dev: class device that is converted into a Scsi_host.
2773  * @attr: device attribute, not used.
2774  * @buf: contains the wwpn in hexadecimal.
2775  * @count: number of wwpn bytes in buf
2776  *
2777  * Returns:
2778  * -EACCES hba reset not enabled, adapter over temp
2779  * -EINVAL soft wwn not enabled, count is invalid, invalid wwpn byte invalid
2780  * -EIO error taking adapter offline or online
2781  * value of count on success
2782  **/
2783 static ssize_t
2784 lpfc_soft_wwpn_store(struct device *dev, struct device_attribute *attr,
2785                      const char *buf, size_t count)
2786 {
2787         struct Scsi_Host  *shost = class_to_shost(dev);
2788         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
2789         struct lpfc_hba   *phba = vport->phba;
2790         struct completion online_compl;
2791         int stat1 = 0, stat2 = 0;
2792         unsigned int cnt = count;
2793         u8 wwpn[WWN_SZ];
2794         int rc;
2795
2796         if (!phba->cfg_enable_hba_reset)
2797                 return -EACCES;
2798         spin_lock_irq(&phba->hbalock);
2799         if (phba->over_temp_state == HBA_OVER_TEMP) {
2800                 spin_unlock_irq(&phba->hbalock);
2801                 return -EACCES;
2802         }
2803         spin_unlock_irq(&phba->hbalock);
2804         /* count may include a LF at end of string */
2805         if (buf[cnt-1] == '\n')
2806                 cnt--;
2807
2808         if (!phba->soft_wwn_enable)
2809                 return -EINVAL;
2810
2811         /* lock setting wwpn, wwnn down */
2812         phba->soft_wwn_enable = 0;
2813
2814         rc = lpfc_wwn_set(buf, cnt, wwpn);
2815         if (rc) {
2816                 /* not able to set wwpn, unlock it */
2817                 phba->soft_wwn_enable = 1;
2818                 return rc;
2819         }
2820
2821         phba->cfg_soft_wwpn = wwn_to_u64(wwpn);
2822         fc_host_port_name(shost) = phba->cfg_soft_wwpn;
2823         if (phba->cfg_soft_wwnn)
2824                 fc_host_node_name(shost) = phba->cfg_soft_wwnn;
2825
2826         dev_printk(KERN_NOTICE, &phba->pcidev->dev,
2827                    "lpfc%d: Reinitializing to use soft_wwpn\n", phba->brd_no);
2828
2829         stat1 = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
2830         if (stat1)
2831                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2832                                 "0463 lpfc_soft_wwpn attribute set failed to "
2833                                 "reinit adapter - %d\n", stat1);
2834         init_completion(&online_compl);
2835         rc = lpfc_workq_post_event(phba, &stat2, &online_compl,
2836                                    LPFC_EVT_ONLINE);
2837         if (rc == 0)
2838                 return -ENOMEM;
2839
2840         wait_for_completion(&online_compl);
2841         if (stat2)
2842                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2843                                 "0464 lpfc_soft_wwpn attribute set failed to "
2844                                 "reinit adapter - %d\n", stat2);
2845         return (stat1 || stat2) ? -EIO : count;
2846 }
2847 static DEVICE_ATTR_RW(lpfc_soft_wwpn);
2848
2849 /**
2850  * lpfc_soft_wwnn_show - Return the cfg soft ww node name for the adapter
2851  * @dev: class device that is converted into a Scsi_host.
2852  * @attr: device attribute, not used.
2853  * @buf: on return contains the wwnn in hexadecimal.
2854  *
2855  * Returns: size of formatted string.
2856  **/
2857 static ssize_t
2858 lpfc_soft_wwnn_show(struct device *dev, struct device_attribute *attr,
2859                     char *buf)
2860 {
2861         struct Scsi_Host *shost = class_to_shost(dev);
2862         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
2863         return scnprintf(buf, PAGE_SIZE, "0x%llx\n",
2864                         (unsigned long long)phba->cfg_soft_wwnn);
2865 }
2866
2867 /**
2868  * lpfc_soft_wwnn_store - sets the ww node name of the adapter
2869  * @dev: class device that is converted into a Scsi_host.
2870  * @attr: device attribute, not used.
2871  * @buf: contains the ww node name in hexadecimal.
2872  * @count: number of wwnn bytes in buf.
2873  *
2874  * Returns:
2875  * -EINVAL soft wwn not enabled, count is invalid, invalid wwnn byte invalid
2876  * value of count on success
2877  **/
2878 static ssize_t
2879 lpfc_soft_wwnn_store(struct device *dev, struct device_attribute *attr,
2880                      const char *buf, size_t count)
2881 {
2882         struct Scsi_Host *shost = class_to_shost(dev);
2883         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
2884         unsigned int cnt = count;
2885         u8 wwnn[WWN_SZ];
2886         int rc;
2887
2888         /* count may include a LF at end of string */
2889         if (buf[cnt-1] == '\n')
2890                 cnt--;
2891
2892         if (!phba->soft_wwn_enable)
2893                 return -EINVAL;
2894
2895         rc = lpfc_wwn_set(buf, cnt, wwnn);
2896         if (rc) {
2897                 /* Allow wwnn to be set many times, as long as the enable
2898                  * is set. However, once the wwpn is set, everything locks.
2899                  */
2900                 return rc;
2901         }
2902
2903         phba->cfg_soft_wwnn = wwn_to_u64(wwnn);
2904
2905         dev_printk(KERN_NOTICE, &phba->pcidev->dev,
2906                    "lpfc%d: soft_wwnn set. Value will take effect upon "
2907                    "setting of the soft_wwpn\n", phba->brd_no);
2908
2909         return count;
2910 }
2911 static DEVICE_ATTR_RW(lpfc_soft_wwnn);
2912
2913 /**
2914  * lpfc_oas_tgt_show - Return wwpn of target whose luns maybe enabled for
2915  *                    Optimized Access Storage (OAS) operations.
2916  * @dev: class device that is converted into a Scsi_host.
2917  * @attr: device attribute, not used.
2918  * @buf: buffer for passing information.
2919  *
2920  * Returns:
2921  * value of count
2922  **/
2923 static ssize_t
2924 lpfc_oas_tgt_show(struct device *dev, struct device_attribute *attr,
2925                   char *buf)
2926 {
2927         struct Scsi_Host *shost = class_to_shost(dev);
2928         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
2929
2930         return scnprintf(buf, PAGE_SIZE, "0x%llx\n",
2931                         wwn_to_u64(phba->cfg_oas_tgt_wwpn));
2932 }
2933
2934 /**
2935  * lpfc_oas_tgt_store - Store wwpn of target whose luns maybe enabled for
2936  *                    Optimized Access Storage (OAS) operations.
2937  * @dev: class device that is converted into a Scsi_host.
2938  * @attr: device attribute, not used.
2939  * @buf: buffer for passing information.
2940  * @count: Size of the data buffer.
2941  *
2942  * Returns:
2943  * -EINVAL count is invalid, invalid wwpn byte invalid
2944  * -EPERM oas is not supported by hba
2945  * value of count on success
2946  **/
2947 static ssize_t
2948 lpfc_oas_tgt_store(struct device *dev, struct device_attribute *attr,
2949                    const char *buf, size_t count)
2950 {
2951         struct Scsi_Host *shost = class_to_shost(dev);
2952         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
2953         unsigned int cnt = count;
2954         uint8_t wwpn[WWN_SZ];
2955         int rc;
2956
2957         if (!phba->cfg_fof)
2958                 return -EPERM;
2959
2960         /* count may include a LF at end of string */
2961         if (buf[cnt-1] == '\n')
2962                 cnt--;
2963
2964         rc = lpfc_wwn_set(buf, cnt, wwpn);
2965         if (rc)
2966                 return rc;
2967
2968         memcpy(phba->cfg_oas_tgt_wwpn, wwpn, (8 * sizeof(uint8_t)));
2969         memcpy(phba->sli4_hba.oas_next_tgt_wwpn, wwpn, (8 * sizeof(uint8_t)));
2970         if (wwn_to_u64(wwpn) == 0)
2971                 phba->cfg_oas_flags |= OAS_FIND_ANY_TARGET;
2972         else
2973                 phba->cfg_oas_flags &= ~OAS_FIND_ANY_TARGET;
2974         phba->cfg_oas_flags &= ~OAS_LUN_VALID;
2975         phba->sli4_hba.oas_next_lun = FIND_FIRST_OAS_LUN;
2976         return count;
2977 }
2978 static DEVICE_ATTR(lpfc_xlane_tgt, S_IRUGO | S_IWUSR,
2979                    lpfc_oas_tgt_show, lpfc_oas_tgt_store);
2980
2981 /**
2982  * lpfc_oas_priority_show - Return wwpn of target whose luns maybe enabled for
2983  *                    Optimized Access Storage (OAS) operations.
2984  * @dev: class device that is converted into a Scsi_host.
2985  * @attr: device attribute, not used.
2986  * @buf: buffer for passing information.
2987  *
2988  * Returns:
2989  * value of count
2990  **/
2991 static ssize_t
2992 lpfc_oas_priority_show(struct device *dev, struct device_attribute *attr,
2993                        char *buf)
2994 {
2995         struct Scsi_Host *shost = class_to_shost(dev);
2996         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
2997
2998         return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_priority);
2999 }
3000
3001 /**
3002  * lpfc_oas_priority_store - Store wwpn of target whose luns maybe enabled for
3003  *                    Optimized Access Storage (OAS) operations.
3004  * @dev: class device that is converted into a Scsi_host.
3005  * @attr: device attribute, not used.
3006  * @buf: buffer for passing information.
3007  * @count: Size of the data buffer.
3008  *
3009  * Returns:
3010  * -EINVAL count is invalid, invalid wwpn byte invalid
3011  * -EPERM oas is not supported by hba
3012  * value of count on success
3013  **/
3014 static ssize_t
3015 lpfc_oas_priority_store(struct device *dev, struct device_attribute *attr,
3016                         const char *buf, size_t count)
3017 {
3018         struct Scsi_Host *shost = class_to_shost(dev);
3019         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
3020         unsigned int cnt = count;
3021         unsigned long val;
3022         int ret;
3023
3024         if (!phba->cfg_fof)
3025                 return -EPERM;
3026
3027         /* count may include a LF at end of string */
3028         if (buf[cnt-1] == '\n')
3029                 cnt--;
3030
3031         ret = kstrtoul(buf, 0, &val);
3032         if (ret || (val > 0x7f))
3033                 return -EINVAL;
3034
3035         if (val)
3036                 phba->cfg_oas_priority = (uint8_t)val;
3037         else
3038                 phba->cfg_oas_priority = phba->cfg_XLanePriority;
3039         return count;
3040 }
3041 static DEVICE_ATTR(lpfc_xlane_priority, S_IRUGO | S_IWUSR,
3042                    lpfc_oas_priority_show, lpfc_oas_priority_store);
3043
3044 /**
3045  * lpfc_oas_vpt_show - Return wwpn of vport whose targets maybe enabled
3046  *                    for Optimized Access Storage (OAS) operations.
3047  * @dev: class device that is converted into a Scsi_host.
3048  * @attr: device attribute, not used.
3049  * @buf: buffer for passing information.
3050  *
3051  * Returns:
3052  * value of count on success
3053  **/
3054 static ssize_t
3055 lpfc_oas_vpt_show(struct device *dev, struct device_attribute *attr,
3056                   char *buf)
3057 {
3058         struct Scsi_Host *shost = class_to_shost(dev);
3059         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
3060
3061         return scnprintf(buf, PAGE_SIZE, "0x%llx\n",
3062                         wwn_to_u64(phba->cfg_oas_vpt_wwpn));
3063 }
3064
3065 /**
3066  * lpfc_oas_vpt_store - Store wwpn of vport whose targets maybe enabled
3067  *                    for Optimized Access Storage (OAS) operations.
3068  * @dev: class device that is converted into a Scsi_host.
3069  * @attr: device attribute, not used.
3070  * @buf: buffer for passing information.
3071  * @count: Size of the data buffer.
3072  *
3073  * Returns:
3074  * -EINVAL count is invalid, invalid wwpn byte invalid
3075  * -EPERM oas is not supported by hba
3076  * value of count on success
3077  **/
3078 static ssize_t
3079 lpfc_oas_vpt_store(struct device *dev, struct device_attribute *attr,
3080                    const char *buf, size_t count)
3081 {
3082         struct Scsi_Host *shost = class_to_shost(dev);
3083         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
3084         unsigned int cnt = count;
3085         uint8_t wwpn[WWN_SZ];
3086         int rc;
3087
3088         if (!phba->cfg_fof)
3089                 return -EPERM;
3090
3091         /* count may include a LF at end of string */
3092         if (buf[cnt-1] == '\n')
3093                 cnt--;
3094
3095         rc = lpfc_wwn_set(buf, cnt, wwpn);
3096         if (rc)
3097                 return rc;
3098
3099         memcpy(phba->cfg_oas_vpt_wwpn, wwpn, (8 * sizeof(uint8_t)));
3100         memcpy(phba->sli4_hba.oas_next_vpt_wwpn, wwpn, (8 * sizeof(uint8_t)));
3101         if (wwn_to_u64(wwpn) == 0)
3102                 phba->cfg_oas_flags |= OAS_FIND_ANY_VPORT;
3103         else
3104                 phba->cfg_oas_flags &= ~OAS_FIND_ANY_VPORT;
3105         phba->cfg_oas_flags &= ~OAS_LUN_VALID;
3106         if (phba->cfg_oas_priority == 0)
3107                 phba->cfg_oas_priority = phba->cfg_XLanePriority;
3108         phba->sli4_hba.oas_next_lun = FIND_FIRST_OAS_LUN;
3109         return count;
3110 }
3111 static DEVICE_ATTR(lpfc_xlane_vpt, S_IRUGO | S_IWUSR,
3112                    lpfc_oas_vpt_show, lpfc_oas_vpt_store);
3113
3114 /**
3115  * lpfc_oas_lun_state_show - Return the current state (enabled or disabled)
3116  *                          of whether luns will be enabled or disabled
3117  *                          for Optimized Access Storage (OAS) operations.
3118  * @dev: class device that is converted into a Scsi_host.
3119  * @attr: device attribute, not used.
3120  * @buf: buffer for passing information.
3121  *
3122  * Returns:
3123  * size of formatted string.
3124  **/
3125 static ssize_t
3126 lpfc_oas_lun_state_show(struct device *dev, struct device_attribute *attr,
3127                         char *buf)
3128 {
3129         struct Scsi_Host *shost = class_to_shost(dev);
3130         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
3131
3132         return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_lun_state);
3133 }
3134
3135 /**
3136  * lpfc_oas_lun_state_store - Store the state (enabled or disabled)
3137  *                          of whether luns will be enabled or disabled
3138  *                          for Optimized Access Storage (OAS) operations.
3139  * @dev: class device that is converted into a Scsi_host.
3140  * @attr: device attribute, not used.
3141  * @buf: buffer for passing information.
3142  * @count: Size of the data buffer.
3143  *
3144  * Returns:
3145  * -EINVAL count is invalid, invalid wwpn byte invalid
3146  * -EPERM oas is not supported by hba
3147  * value of count on success
3148  **/
3149 static ssize_t
3150 lpfc_oas_lun_state_store(struct device *dev, struct device_attribute *attr,
3151                          const char *buf, size_t count)
3152 {
3153         struct Scsi_Host *shost = class_to_shost(dev);
3154         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
3155         int val = 0;
3156
3157         if (!phba->cfg_fof)
3158                 return -EPERM;
3159
3160         if (!isdigit(buf[0]))
3161                 return -EINVAL;
3162
3163         if (sscanf(buf, "%i", &val) != 1)
3164                 return -EINVAL;
3165
3166         if ((val != 0) && (val != 1))
3167                 return -EINVAL;
3168
3169         phba->cfg_oas_lun_state = val;
3170         return strlen(buf);
3171 }
3172 static DEVICE_ATTR(lpfc_xlane_lun_state, S_IRUGO | S_IWUSR,
3173                    lpfc_oas_lun_state_show, lpfc_oas_lun_state_store);
3174
3175 /**
3176  * lpfc_oas_lun_status_show - Return the status of the Optimized Access
3177  *                          Storage (OAS) lun returned by the
3178  *                          lpfc_oas_lun_show function.
3179  * @dev: class device that is converted into a Scsi_host.
3180  * @attr: device attribute, not used.
3181  * @buf: buffer for passing information.
3182  *
3183  * Returns:
3184  * size of formatted string.
3185  **/
3186 static ssize_t
3187 lpfc_oas_lun_status_show(struct device *dev, struct device_attribute *attr,
3188                          char *buf)
3189 {
3190         struct Scsi_Host *shost = class_to_shost(dev);
3191         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
3192
3193         if (!(phba->cfg_oas_flags & OAS_LUN_VALID))
3194                 return -EFAULT;
3195
3196         return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_lun_status);
3197 }
3198 static DEVICE_ATTR(lpfc_xlane_lun_status, S_IRUGO,
3199                    lpfc_oas_lun_status_show, NULL);
3200
3201
3202 /**
3203  * lpfc_oas_lun_state_set - enable or disable a lun for Optimized Access Storage
3204  *                         (OAS) operations.
3205  * @phba: lpfc_hba pointer.
3206  * @vpt_wwpn: wwpn of the vport associated with the returned lun
3207  * @tgt_wwpn: wwpn of the target associated with the returned lun
3208  * @lun: the fc lun for setting oas state.
3209  * @oas_state: the oas state to be set to the lun.
3210  * @pri: priority
3211  *
3212  * Returns:
3213  * SUCCESS : 0
3214  * -EPERM OAS is not enabled or not supported by this port.
3215  *
3216  */
3217 static size_t
3218 lpfc_oas_lun_state_set(struct lpfc_hba *phba, uint8_t vpt_wwpn[],
3219                        uint8_t tgt_wwpn[], uint64_t lun,
3220                        uint32_t oas_state, uint8_t pri)
3221 {
3222
3223         int rc = 0;
3224
3225         if (!phba->cfg_fof)
3226                 return -EPERM;
3227
3228         if (oas_state) {
3229                 if (!lpfc_enable_oas_lun(phba, (struct lpfc_name *)vpt_wwpn,
3230                                          (struct lpfc_name *)tgt_wwpn,
3231                                          lun, pri))
3232                         rc = -ENOMEM;
3233         } else {
3234                 lpfc_disable_oas_lun(phba, (struct lpfc_name *)vpt_wwpn,
3235                                      (struct lpfc_name *)tgt_wwpn, lun, pri);
3236         }
3237         return rc;
3238
3239 }
3240
3241 /**
3242  * lpfc_oas_lun_get_next - get the next lun that has been enabled for Optimized
3243  *                        Access Storage (OAS) operations.
3244  * @phba: lpfc_hba pointer.
3245  * @vpt_wwpn: wwpn of the vport associated with the returned lun
3246  * @tgt_wwpn: wwpn of the target associated with the returned lun
3247  * @lun_status: status of the lun returned lun
3248  * @lun_pri: priority of the lun returned lun
3249  *
3250  * Returns the first or next lun enabled for OAS operations for the vport/target
3251  * specified.  If a lun is found, its vport wwpn, target wwpn and status is
3252  * returned.  If the lun is not found, NOT_OAS_ENABLED_LUN is returned.
3253  *
3254  * Return:
3255  * lun that is OAS enabled for the vport/target
3256  * NOT_OAS_ENABLED_LUN when no oas enabled lun found.
3257  */
3258 static uint64_t
3259 lpfc_oas_lun_get_next(struct lpfc_hba *phba, uint8_t vpt_wwpn[],
3260                       uint8_t tgt_wwpn[], uint32_t *lun_status,
3261                       uint32_t *lun_pri)
3262 {
3263         uint64_t found_lun;
3264
3265         if (unlikely(!phba) || !vpt_wwpn || !tgt_wwpn)
3266                 return NOT_OAS_ENABLED_LUN;
3267         if (lpfc_find_next_oas_lun(phba, (struct lpfc_name *)
3268                                    phba->sli4_hba.oas_next_vpt_wwpn,
3269                                    (struct lpfc_name *)
3270                                    phba->sli4_hba.oas_next_tgt_wwpn,
3271                                    &phba->sli4_hba.oas_next_lun,
3272                                    (struct lpfc_name *)vpt_wwpn,
3273                                    (struct lpfc_name *)tgt_wwpn,
3274                                    &found_lun, lun_status, lun_pri))
3275                 return found_lun;
3276         else
3277                 return NOT_OAS_ENABLED_LUN;
3278 }
3279
3280 /**
3281  * lpfc_oas_lun_state_change - enable/disable a lun for OAS operations
3282  * @phba: lpfc_hba pointer.
3283  * @vpt_wwpn: vport wwpn by reference.
3284  * @tgt_wwpn: target wwpn by reference.
3285  * @lun: the fc lun for setting oas state.
3286  * @oas_state: the oas state to be set to the oas_lun.
3287  * @pri: priority
3288  *
3289  * This routine enables (OAS_LUN_ENABLE) or disables (OAS_LUN_DISABLE)
3290  * a lun for OAS operations.
3291  *
3292  * Return:
3293  * SUCCESS: 0
3294  * -ENOMEM: failed to enable an lun for OAS operations
3295  * -EPERM: OAS is not enabled
3296  */
3297 static ssize_t
3298 lpfc_oas_lun_state_change(struct lpfc_hba *phba, uint8_t vpt_wwpn[],
3299                           uint8_t tgt_wwpn[], uint64_t lun,
3300                           uint32_t oas_state, uint8_t pri)
3301 {
3302
3303         int rc;
3304
3305         rc = lpfc_oas_lun_state_set(phba, vpt_wwpn, tgt_wwpn, lun,
3306                                     oas_state, pri);
3307         return rc;
3308 }
3309
3310 /**
3311  * lpfc_oas_lun_show - Return oas enabled luns from a chosen target
3312  * @dev: class device that is converted into a Scsi_host.
3313  * @attr: device attribute, not used.
3314  * @buf: buffer for passing information.
3315  *
3316  * This routine returns a lun enabled for OAS each time the function
3317  * is called.
3318  *
3319  * Returns:
3320  * SUCCESS: size of formatted string.
3321  * -EFAULT: target or vport wwpn was not set properly.
3322  * -EPERM: oas is not enabled.
3323  **/
3324 static ssize_t
3325 lpfc_oas_lun_show(struct device *dev, struct device_attribute *attr,
3326                   char *buf)
3327 {
3328         struct Scsi_Host *shost = class_to_shost(dev);
3329         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
3330
3331         uint64_t oas_lun;
3332         int len = 0;
3333
3334         if (!phba->cfg_fof)
3335                 return -EPERM;
3336
3337         if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0)
3338                 if (!(phba->cfg_oas_flags & OAS_FIND_ANY_VPORT))
3339                         return -EFAULT;
3340
3341         if (wwn_to_u64(phba->cfg_oas_tgt_wwpn) == 0)
3342                 if (!(phba->cfg_oas_flags & OAS_FIND_ANY_TARGET))
3343                         return -EFAULT;
3344
3345         oas_lun = lpfc_oas_lun_get_next(phba, phba->cfg_oas_vpt_wwpn,
3346                                         phba->cfg_oas_tgt_wwpn,
3347                                         &phba->cfg_oas_lun_status,
3348                                         &phba->cfg_oas_priority);
3349         if (oas_lun != NOT_OAS_ENABLED_LUN)
3350                 phba->cfg_oas_flags |= OAS_LUN_VALID;
3351
3352         len += scnprintf(buf + len, PAGE_SIZE-len, "0x%llx", oas_lun);
3353
3354         return len;
3355 }
3356
3357 /**
3358  * lpfc_oas_lun_store - Sets the OAS state for lun
3359  * @dev: class device that is converted into a Scsi_host.
3360  * @attr: device attribute, not used.
3361  * @buf: buffer for passing information.
3362  * @count: size of the formatting string
3363  *
3364  * This function sets the OAS state for lun.  Before this function is called,
3365  * the vport wwpn, target wwpn, and oas state need to be set.
3366  *
3367  * Returns:
3368  * SUCCESS: size of formatted string.
3369  * -EFAULT: target or vport wwpn was not set properly.
3370  * -EPERM: oas is not enabled.
3371  * size of formatted string.
3372  **/
3373 static ssize_t
3374 lpfc_oas_lun_store(struct device *dev, struct device_attribute *attr,
3375                    const char *buf, size_t count)
3376 {
3377         struct Scsi_Host *shost = class_to_shost(dev);
3378         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
3379         uint64_t scsi_lun;
3380         uint32_t pri;
3381         ssize_t rc;
3382
3383         if (!phba->cfg_fof)
3384                 return -EPERM;
3385
3386         if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0)
3387                 return -EFAULT;
3388
3389         if (wwn_to_u64(phba->cfg_oas_tgt_wwpn) == 0)
3390                 return -EFAULT;
3391
3392         if (!isdigit(buf[0]))
3393                 return -EINVAL;
3394
3395         if (sscanf(buf, "0x%llx", &scsi_lun) != 1)
3396                 return -EINVAL;
3397
3398         pri = phba->cfg_oas_priority;
3399         if (pri == 0)
3400                 pri = phba->cfg_XLanePriority;
3401
3402         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
3403                         "3372 Try to set vport 0x%llx target 0x%llx lun:0x%llx "
3404                         "priority 0x%x with oas state %d\n",
3405                         wwn_to_u64(phba->cfg_oas_vpt_wwpn),
3406                         wwn_to_u64(phba->cfg_oas_tgt_wwpn), scsi_lun,
3407                         pri, phba->cfg_oas_lun_state);
3408
3409         rc = lpfc_oas_lun_state_change(phba, phba->cfg_oas_vpt_wwpn,
3410                                        phba->cfg_oas_tgt_wwpn, scsi_lun,
3411                                        phba->cfg_oas_lun_state, pri);
3412         if (rc)
3413                 return rc;
3414
3415         return count;
3416 }
3417 static DEVICE_ATTR(lpfc_xlane_lun, S_IRUGO | S_IWUSR,
3418                    lpfc_oas_lun_show, lpfc_oas_lun_store);
3419
3420 int lpfc_enable_nvmet_cnt;
3421 unsigned long long lpfc_enable_nvmet[LPFC_NVMET_MAX_PORTS] = {
3422         0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
3423         0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
3424 module_param_array(lpfc_enable_nvmet, ullong, &lpfc_enable_nvmet_cnt, 0444);
3425 MODULE_PARM_DESC(lpfc_enable_nvmet, "Enable HBA port(s) WWPN as a NVME Target");
3426
3427 static int lpfc_poll = 0;
3428 module_param(lpfc_poll, int, S_IRUGO);
3429 MODULE_PARM_DESC(lpfc_poll, "FCP ring polling mode control:"
3430                  " 0 - none,"
3431                  " 1 - poll with interrupts enabled"
3432                  " 3 - poll and disable FCP ring interrupts");
3433
3434 static DEVICE_ATTR_RW(lpfc_poll);
3435
3436 int lpfc_no_hba_reset_cnt;
3437 unsigned long lpfc_no_hba_reset[MAX_HBAS_NO_RESET] = {
3438         0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
3439 module_param_array(lpfc_no_hba_reset, ulong, &lpfc_no_hba_reset_cnt, 0444);
3440 MODULE_PARM_DESC(lpfc_no_hba_reset, "WWPN of HBAs that should not be reset");
3441
3442 LPFC_ATTR(sli_mode, 3, 3, 3,
3443         "SLI mode selector: 3 - select SLI-3");
3444
3445 LPFC_ATTR_R(enable_npiv, 1, 0, 1,
3446         "Enable NPIV functionality");
3447
3448 LPFC_ATTR_R(fcf_failover_policy, 1, 1, 2,
3449         "FCF Fast failover=1 Priority failover=2");
3450
3451 /*
3452  * lpfc_fcp_wait_abts_rsp: Modifies criteria for reporting completion of
3453  * aborted IO.
3454  * The range is [0,1]. Default value is 0
3455  *      0, IO completes after ABTS issued (default).
3456  *      1, IO completes after receipt of ABTS response or timeout.
3457  */
3458 LPFC_ATTR_R(fcp_wait_abts_rsp, 0, 0, 1, "Wait for FCP ABTS completion");
3459
3460 /*
3461 # lpfc_enable_rrq: Track XRI/OXID reuse after IO failures
3462 #       0x0 = disabled, XRI/OXID use not tracked.
3463 #       0x1 = XRI/OXID reuse is timed with ratov, RRQ sent.
3464 #       0x2 = XRI/OXID reuse is timed with ratov, No RRQ sent.
3465 */
3466 LPFC_ATTR_R(enable_rrq, 2, 0, 2,
3467         "Enable RRQ functionality");
3468
3469 /*
3470 # lpfc_suppress_link_up:  Bring link up at initialization
3471 #            0x0  = bring link up (issue MBX_INIT_LINK)
3472 #            0x1  = do NOT bring link up at initialization(MBX_INIT_LINK)
3473 #            0x2  = never bring up link
3474 # Default value is 0.
3475 */
3476 LPFC_ATTR_R(suppress_link_up, LPFC_INITIALIZE_LINK, LPFC_INITIALIZE_LINK,
3477                 LPFC_DELAY_INIT_LINK_INDEFINITELY,
3478                 "Suppress Link Up at initialization");
3479
3480 static ssize_t
3481 lpfc_pls_show(struct device *dev, struct device_attribute *attr, char *buf)
3482 {
3483         struct Scsi_Host  *shost = class_to_shost(dev);
3484         struct lpfc_hba   *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
3485
3486         return scnprintf(buf, PAGE_SIZE, "%d\n",
3487                          phba->sli4_hba.pc_sli4_params.pls);
3488 }
3489 static DEVICE_ATTR(pls, 0444,
3490                          lpfc_pls_show, NULL);
3491
3492 static ssize_t
3493 lpfc_pt_show(struct device *dev, struct device_attribute *attr, char *buf)
3494 {
3495         struct Scsi_Host  *shost = class_to_shost(dev);
3496         struct lpfc_hba   *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
3497
3498         return scnprintf(buf, PAGE_SIZE, "%d\n",
3499                          (phba->hba_flag & HBA_PERSISTENT_TOPO) ? 1 : 0);
3500 }
3501 static DEVICE_ATTR(pt, 0444,
3502                          lpfc_pt_show, NULL);
3503
3504 /*
3505 # lpfc_cnt: Number of IOCBs allocated for ELS, CT, and ABTS
3506 #       1 - (1024)
3507 #       2 - (2048)
3508 #       3 - (3072)
3509 #       4 - (4096)
3510 #       5 - (5120)
3511 */
3512 static ssize_t
3513 lpfc_iocb_hw_show(struct device *dev, struct device_attribute *attr, char *buf)
3514 {
3515         struct Scsi_Host  *shost = class_to_shost(dev);
3516         struct lpfc_hba   *phba = ((struct lpfc_vport *) shost->hostdata)->phba;
3517
3518         return scnprintf(buf, PAGE_SIZE, "%d\n", phba->iocb_max);
3519 }
3520
3521 static DEVICE_ATTR(iocb_hw, S_IRUGO,
3522                          lpfc_iocb_hw_show, NULL);
3523 static ssize_t
3524 lpfc_txq_hw_show(struct device *dev, struct device_attribute *attr, char *buf)
3525 {
3526         struct Scsi_Host  *shost = class_to_shost(dev);
3527         struct lpfc_hba   *phba = ((struct lpfc_vport *) shost->hostdata)->phba;
3528         struct lpfc_sli_ring *pring = lpfc_phba_elsring(phba);
3529
3530         return scnprintf(buf, PAGE_SIZE, "%d\n",
3531                         pring ? pring->txq_max : 0);
3532 }
3533
3534 static DEVICE_ATTR(txq_hw, S_IRUGO,
3535                          lpfc_txq_hw_show, NULL);
3536 static ssize_t
3537 lpfc_txcmplq_hw_show(struct device *dev, struct device_attribute *attr,
3538  char *buf)
3539 {
3540         struct Scsi_Host  *shost = class_to_shost(dev);
3541         struct lpfc_hba   *phba = ((struct lpfc_vport *) shost->hostdata)->phba;
3542         struct lpfc_sli_ring *pring = lpfc_phba_elsring(phba);
3543
3544         return scnprintf(buf, PAGE_SIZE, "%d\n",
3545                         pring ? pring->txcmplq_max : 0);
3546 }
3547
3548 static DEVICE_ATTR(txcmplq_hw, S_IRUGO,
3549                          lpfc_txcmplq_hw_show, NULL);
3550
3551 /*
3552 # lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear
3553 # until the timer expires. Value range is [0,255]. Default value is 30.
3554 */
3555 static int lpfc_nodev_tmo = LPFC_DEF_DEVLOSS_TMO;
3556 static int lpfc_devloss_tmo = LPFC_DEF_DEVLOSS_TMO;
3557 module_param(lpfc_nodev_tmo, int, 0);
3558 MODULE_PARM_DESC(lpfc_nodev_tmo,
3559                  "Seconds driver will hold I/O waiting "
3560                  "for a device to come back");
3561
3562 /**
3563  * lpfc_nodev_tmo_show - Return the hba dev loss timeout value
3564  * @dev: class converted to a Scsi_host structure.
3565  * @attr: device attribute, not used.
3566  * @buf: on return contains the dev loss timeout in decimal.
3567  *
3568  * Returns: size of formatted string.
3569  **/
3570 static ssize_t
3571 lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr,
3572                     char *buf)
3573 {
3574         struct Scsi_Host  *shost = class_to_shost(dev);
3575         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
3576
3577         return scnprintf(buf, PAGE_SIZE, "%d\n",        vport->cfg_devloss_tmo);
3578 }
3579
3580 /**
3581  * lpfc_nodev_tmo_init - Set the hba nodev timeout value
3582  * @vport: lpfc vport structure pointer.
3583  * @val: contains the nodev timeout value.
3584  *
3585  * Description:
3586  * If the devloss tmo is already set then nodev tmo is set to devloss tmo,
3587  * a kernel error message is printed and zero is returned.
3588  * Else if val is in range then nodev tmo and devloss tmo are set to val.
3589  * Otherwise nodev tmo is set to the default value.
3590  *
3591  * Returns:
3592  * zero if already set or if val is in range
3593  * -EINVAL val out of range
3594  **/
3595 static int
3596 lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val)
3597 {
3598         if (vport->cfg_devloss_tmo != LPFC_DEF_DEVLOSS_TMO) {
3599                 vport->cfg_nodev_tmo = vport->cfg_devloss_tmo;
3600                 if (val != LPFC_DEF_DEVLOSS_TMO)
3601                         lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
3602                                          "0407 Ignoring lpfc_nodev_tmo module "
3603                                          "parameter because lpfc_devloss_tmo "
3604                                          "is set.\n");
3605                 return 0;
3606         }
3607
3608         if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {
3609                 vport->cfg_nodev_tmo = val;
3610                 vport->cfg_devloss_tmo = val;
3611                 return 0;
3612         }
3613         lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
3614                          "0400 lpfc_nodev_tmo attribute cannot be set to"
3615                          " %d, allowed range is [%d, %d]\n",
3616                          val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);
3617         vport->cfg_nodev_tmo = LPFC_DEF_DEVLOSS_TMO;
3618         return -EINVAL;
3619 }
3620
3621 /**
3622  * lpfc_update_rport_devloss_tmo - Update dev loss tmo value
3623  * @vport: lpfc vport structure pointer.
3624  *
3625  * Description:
3626  * Update all the ndlp's dev loss tmo with the vport devloss tmo value.
3627  **/
3628 static void
3629 lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport)
3630 {
3631         struct Scsi_Host  *shost;
3632         struct lpfc_nodelist  *ndlp;
3633 #if (IS_ENABLED(CONFIG_NVME_FC))
3634         struct lpfc_nvme_rport *rport;
3635         struct nvme_fc_remote_port *remoteport = NULL;
3636 #endif
3637
3638         shost = lpfc_shost_from_vport(vport);
3639         spin_lock_irq(shost->host_lock);
3640         list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
3641                 if (ndlp->rport)
3642                         ndlp->rport->dev_loss_tmo = vport->cfg_devloss_tmo;
3643 #if (IS_ENABLED(CONFIG_NVME_FC))
3644                 spin_lock(&ndlp->lock);
3645                 rport = lpfc_ndlp_get_nrport(ndlp);
3646                 if (rport)
3647                         remoteport = rport->remoteport;
3648                 spin_unlock(&ndlp->lock);
3649                 if (rport && remoteport)
3650                         nvme_fc_set_remoteport_devloss(remoteport,
3651                                                        vport->cfg_devloss_tmo);
3652 #endif
3653         }
3654         spin_unlock_irq(shost->host_lock);
3655 }
3656
3657 /**
3658  * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values
3659  * @vport: lpfc vport structure pointer.
3660  * @val: contains the tmo value.
3661  *
3662  * Description:
3663  * If the devloss tmo is already set or the vport dev loss tmo has changed
3664  * then a kernel error message is printed and zero is returned.
3665  * Else if val is in range then nodev tmo and devloss tmo are set to val.
3666  * Otherwise nodev tmo is set to the default value.
3667  *
3668  * Returns:
3669  * zero if already set or if val is in range
3670  * -EINVAL val out of range
3671  **/
3672 static int
3673 lpfc_nodev_tmo_set(struct lpfc_vport *vport, int val)
3674 {
3675         if (vport->dev_loss_tmo_changed ||
3676             (lpfc_devloss_tmo != LPFC_DEF_DEVLOSS_TMO)) {
3677                 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
3678                                  "0401 Ignoring change to lpfc_nodev_tmo "
3679                                  "because lpfc_devloss_tmo is set.\n");
3680                 return 0;
3681         }
3682         if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {
3683                 vport->cfg_nodev_tmo = val;
3684                 vport->cfg_devloss_tmo = val;
3685                 /*
3686                  * For compat: set the fc_host dev loss so new rports
3687                  * will get the value.
3688                  */
3689                 fc_host_dev_loss_tmo(lpfc_shost_from_vport(vport)) = val;
3690                 lpfc_update_rport_devloss_tmo(vport);
3691                 return 0;
3692         }
3693         lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
3694                          "0403 lpfc_nodev_tmo attribute cannot be set to "
3695                          "%d, allowed range is [%d, %d]\n",
3696                          val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);
3697         return -EINVAL;
3698 }
3699
3700 lpfc_vport_param_store(nodev_tmo)
3701
3702 static DEVICE_ATTR_RW(lpfc_nodev_tmo);
3703
3704 /*
3705 # lpfc_devloss_tmo: If set, it will hold all I/O errors on devices that
3706 # disappear until the timer expires. Value range is [0,255]. Default
3707 # value is 30.
3708 */
3709 module_param(lpfc_devloss_tmo, int, S_IRUGO);
3710 MODULE_PARM_DESC(lpfc_devloss_tmo,
3711                  "Seconds driver will hold I/O waiting "
3712                  "for a device to come back");
3713 lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO,
3714                       LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO)
3715 lpfc_vport_param_show(devloss_tmo)
3716
3717 /**
3718  * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit
3719  * @vport: lpfc vport structure pointer.
3720  * @val: contains the tmo value.
3721  *
3722  * Description:
3723  * If val is in a valid range then set the vport nodev tmo,
3724  * devloss tmo, also set the vport dev loss tmo changed flag.
3725  * Else a kernel error message is printed.
3726  *
3727  * Returns:
3728  * zero if val is in range
3729  * -EINVAL val out of range
3730  **/
3731 static int
3732 lpfc_devloss_tmo_set(struct lpfc_vport *vport, int val)
3733 {
3734         if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {
3735                 vport->cfg_nodev_tmo = val;
3736                 vport->cfg_devloss_tmo = val;
3737                 vport->dev_loss_tmo_changed = 1;
3738                 fc_host_dev_loss_tmo(lpfc_shost_from_vport(vport)) = val;
3739                 lpfc_update_rport_devloss_tmo(vport);
3740                 return 0;
3741         }
3742
3743         lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
3744                          "0404 lpfc_devloss_tmo attribute cannot be set to "
3745                          "%d, allowed range is [%d, %d]\n",
3746                          val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);
3747         return -EINVAL;
3748 }
3749
3750 lpfc_vport_param_store(devloss_tmo)
3751 static DEVICE_ATTR_RW(lpfc_devloss_tmo);
3752
3753 /*
3754  * lpfc_suppress_rsp: Enable suppress rsp feature is firmware supports it
3755  * lpfc_suppress_rsp = 0  Disable
3756  * lpfc_suppress_rsp = 1  Enable (default)
3757  *
3758  */
3759 LPFC_ATTR_R(suppress_rsp, 1, 0, 1,
3760             "Enable suppress rsp feature is firmware supports it");
3761
3762 /*
3763  * lpfc_nvmet_mrq: Specify number of RQ pairs for processing NVMET cmds
3764  * lpfc_nvmet_mrq = 0  driver will calcualte optimal number of RQ pairs
3765  * lpfc_nvmet_mrq = 1  use a single RQ pair
3766  * lpfc_nvmet_mrq >= 2  use specified RQ pairs for MRQ
3767  *
3768  */
3769 LPFC_ATTR_R(nvmet_mrq,
3770             LPFC_NVMET_MRQ_AUTO, LPFC_NVMET_MRQ_AUTO, LPFC_NVMET_MRQ_MAX,
3771             "Specify number of RQ pairs for processing NVMET cmds");
3772
3773 /*
3774  * lpfc_nvmet_mrq_post: Specify number of RQ buffer to initially post
3775  * to each NVMET RQ. Range 64 to 2048, default is 512.
3776  */
3777 LPFC_ATTR_R(nvmet_mrq_post,
3778             LPFC_NVMET_RQE_DEF_POST, LPFC_NVMET_RQE_MIN_POST,
3779             LPFC_NVMET_RQE_DEF_COUNT,
3780             "Specify number of RQ buffers to initially post");
3781
3782 /*
3783  * lpfc_enable_fc4_type: Defines what FC4 types are supported.
3784  * Supported Values:  1 - register just FCP
3785  *                    3 - register both FCP and NVME
3786  * Supported values are [1,3]. Default value is 3
3787  */
3788 LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_BOTH,
3789             LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH,
3790             "Enable FC4 Protocol support - FCP / NVME");
3791
3792 /*
3793 # lpfc_log_verbose: Only turn this flag on if you are willing to risk being
3794 # deluged with LOTS of information.
3795 # You can set a bit mask to record specific types of verbose messages:
3796 # See lpfc_logmsh.h for definitions.
3797 */
3798 LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff,
3799                        "Verbose logging bit-mask");
3800
3801 /*
3802 # lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters
3803 # objects that have been registered with the nameserver after login.
3804 */
3805 LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1,
3806                   "Deregister nameserver objects before LOGO");
3807
3808 /*
3809 # lun_queue_depth:  This parameter is used to limit the number of outstanding
3810 # commands per FCP LUN.
3811 */
3812 LPFC_VPORT_ATTR_R(lun_queue_depth, 64, 1, 512,
3813                   "Max number of FCP commands we can queue to a specific LUN");
3814
3815 /*
3816 # tgt_queue_depth:  This parameter is used to limit the number of outstanding
3817 # commands per target port. Value range is [10,65535]. Default value is 65535.
3818 */
3819 static uint lpfc_tgt_queue_depth = LPFC_MAX_TGT_QDEPTH;
3820 module_param(lpfc_tgt_queue_depth, uint, 0444);
3821 MODULE_PARM_DESC(lpfc_tgt_queue_depth, "Set max Target queue depth");
3822 lpfc_vport_param_show(tgt_queue_depth);
3823 lpfc_vport_param_init(tgt_queue_depth, LPFC_MAX_TGT_QDEPTH,
3824                       LPFC_MIN_TGT_QDEPTH, LPFC_MAX_TGT_QDEPTH);
3825
3826 /**
3827  * lpfc_tgt_queue_depth_set: Sets an attribute value.
3828  * @vport: lpfc vport structure pointer.
3829  * @val: integer attribute value.
3830  *
3831  * Description: Sets the parameter to the new value.
3832  *
3833  * Returns:
3834  * zero on success
3835  * -EINVAL if val is invalid
3836  */
3837 static int
3838 lpfc_tgt_queue_depth_set(struct lpfc_vport *vport, uint val)
3839 {
3840         struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3841         struct lpfc_nodelist *ndlp;
3842
3843         if (!lpfc_rangecheck(val, LPFC_MIN_TGT_QDEPTH, LPFC_MAX_TGT_QDEPTH))
3844                 return -EINVAL;
3845
3846         if (val == vport->cfg_tgt_queue_depth)
3847                 return 0;
3848
3849         spin_lock_irq(shost->host_lock);
3850         vport->cfg_tgt_queue_depth = val;
3851
3852         /* Next loop thru nodelist and change cmd_qdepth */
3853         list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp)
3854                 ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth;
3855
3856         spin_unlock_irq(shost->host_lock);
3857         return 0;
3858 }
3859
3860 lpfc_vport_param_store(tgt_queue_depth);
3861 static DEVICE_ATTR_RW(lpfc_tgt_queue_depth);
3862
3863 /*
3864 # hba_queue_depth:  This parameter is used to limit the number of outstanding
3865 # commands per lpfc HBA. Value range is [32,8192]. If this parameter
3866 # value is greater than the maximum number of exchanges supported by the HBA,
3867 # then maximum number of exchanges supported by the HBA is used to determine
3868 # the hba_queue_depth.
3869 */
3870 LPFC_ATTR_R(hba_queue_depth, 8192, 32, 8192,
3871             "Max number of FCP commands we can queue to a lpfc HBA");
3872
3873 /*
3874 # peer_port_login:  This parameter allows/prevents logins
3875 # between peer ports hosted on the same physical port.
3876 # When this parameter is set 0 peer ports of same physical port
3877 # are not allowed to login to each other.
3878 # When this parameter is set 1 peer ports of same physical port
3879 # are allowed to login to each other.
3880 # Default value of this parameter is 0.
3881 */
3882 LPFC_VPORT_ATTR_R(peer_port_login, 0, 0, 1,
3883                   "Allow peer ports on the same physical port to login to each "
3884                   "other.");
3885
3886 /*
3887 # restrict_login:  This parameter allows/prevents logins
3888 # between Virtual Ports and remote initiators.
3889 # When this parameter is not set (0) Virtual Ports will accept PLOGIs from
3890 # other initiators and will attempt to PLOGI all remote ports.
3891 # When this parameter is set (1) Virtual Ports will reject PLOGIs from
3892 # remote ports and will not attempt to PLOGI to other initiators.
3893 # This parameter does not restrict to the physical port.
3894 # This parameter does not restrict logins to Fabric resident remote ports.
3895 # Default value of this parameter is 1.
3896 */
3897 static int lpfc_restrict_login = 1;
3898 module_param(lpfc_restrict_login, int, S_IRUGO);
3899 MODULE_PARM_DESC(lpfc_restrict_login,
3900                  "Restrict virtual ports login to remote initiators.");
3901 lpfc_vport_param_show(restrict_login);
3902
3903 /**
3904  * lpfc_restrict_login_init - Set the vport restrict login flag
3905  * @vport: lpfc vport structure pointer.
3906  * @val: contains the restrict login value.
3907  *
3908  * Description:
3909  * If val is not in a valid range then log a kernel error message and set
3910  * the vport restrict login to one.
3911  * If the port type is physical clear the restrict login flag and return.
3912  * Else set the restrict login flag to val.
3913  *
3914  * Returns:
3915  * zero if val is in range
3916  * -EINVAL val out of range
3917  **/
3918 static int
3919 lpfc_restrict_login_init(struct lpfc_vport *vport, int val)
3920 {
3921         if (val < 0 || val > 1) {
3922                 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
3923                                  "0422 lpfc_restrict_login attribute cannot "
3924                                  "be set to %d, allowed range is [0, 1]\n",
3925                                  val);
3926                 vport->cfg_restrict_login = 1;
3927                 return -EINVAL;
3928         }
3929         if (vport->port_type == LPFC_PHYSICAL_PORT) {
3930                 vport->cfg_restrict_login = 0;
3931                 return 0;
3932         }
3933         vport->cfg_restrict_login = val;
3934         return 0;
3935 }
3936
3937 /**
3938  * lpfc_restrict_login_set - Set the vport restrict login flag
3939  * @vport: lpfc vport structure pointer.
3940  * @val: contains the restrict login value.
3941  *
3942  * Description:
3943  * If val is not in a valid range then log a kernel error message and set
3944  * the vport restrict login to one.
3945  * If the port type is physical and the val is not zero log a kernel
3946  * error message, clear the restrict login flag and return zero.
3947  * Else set the restrict login flag to val.
3948  *
3949  * Returns:
3950  * zero if val is in range
3951  * -EINVAL val out of range
3952  **/
3953 static int
3954 lpfc_restrict_login_set(struct lpfc_vport *vport, int val)
3955 {
3956         if (val < 0 || val > 1) {
3957                 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
3958                                  "0425 lpfc_restrict_login attribute cannot "
3959                                  "be set to %d, allowed range is [0, 1]\n",
3960                                  val);
3961                 vport->cfg_restrict_login = 1;
3962                 return -EINVAL;
3963         }
3964         if (vport->port_type == LPFC_PHYSICAL_PORT && val != 0) {
3965                 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
3966                                  "0468 lpfc_restrict_login must be 0 for "
3967                                  "Physical ports.\n");
3968                 vport->cfg_restrict_login = 0;
3969                 return 0;
3970         }
3971         vport->cfg_restrict_login = val;
3972         return 0;
3973 }
3974 lpfc_vport_param_store(restrict_login);
3975 static DEVICE_ATTR_RW(lpfc_restrict_login);
3976
3977 /*
3978 # Some disk devices have a "select ID" or "select Target" capability.
3979 # From a protocol standpoint "select ID" usually means select the
3980 # Fibre channel "ALPA".  In the FC-AL Profile there is an "informative
3981 # annex" which contains a table that maps a "select ID" (a number
3982 # between 0 and 7F) to an ALPA.  By default, for compatibility with
3983 # older drivers, the lpfc driver scans this table from low ALPA to high
3984 # ALPA.
3985 #
3986 # Turning on the scan-down variable (on  = 1, off = 0) will
3987 # cause the lpfc driver to use an inverted table, effectively
3988 # scanning ALPAs from high to low. Value range is [0,1]. Default value is 1.
3989 #
3990 # (Note: This "select ID" functionality is a LOOP ONLY characteristic
3991 # and will not work across a fabric. Also this parameter will take
3992 # effect only in the case when ALPA map is not available.)
3993 */
3994 LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1,
3995                   "Start scanning for devices from highest ALPA to lowest");
3996
3997 /*
3998 # lpfc_topology:  link topology for init link
3999 #            0x0  = attempt loop mode then point-to-point
4000 #            0x01 = internal loopback mode
4001 #            0x02 = attempt point-to-point mode only
4002 #            0x04 = attempt loop mode only
4003 #            0x06 = attempt point-to-point mode then loop
4004 # Set point-to-point mode if you want to run as an N_Port.
4005 # Set loop mode if you want to run as an NL_Port. Value range is [0,0x6].
4006 # Default value is 0.
4007 */
4008 LPFC_ATTR(topology, 0, 0, 6,
4009         "Select Fibre Channel topology");
4010
4011 /**
4012  * lpfc_topology_store - Set the adapters topology field
4013  * @dev: class device that is converted into a scsi_host.
4014  * @attr:device attribute, not used.
4015  * @buf: buffer for passing information.
4016  * @count: size of the data buffer.
4017  *
4018  * Description:
4019  * If val is in a valid range then set the adapter's topology field and
4020  * issue a lip; if the lip fails reset the topology to the old value.
4021  *
4022  * If the value is not in range log a kernel error message and return an error.
4023  *
4024  * Returns:
4025  * zero if val is in range and lip okay
4026  * non-zero return value from lpfc_issue_lip()
4027  * -EINVAL val out of range
4028  **/
4029 static ssize_t
4030 lpfc_topology_store(struct device *dev, struct device_attribute *attr,
4031                         const char *buf, size_t count)
4032 {
4033         struct Scsi_Host  *shost = class_to_shost(dev);
4034         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4035         struct lpfc_hba   *phba = vport->phba;
4036         int val = 0;
4037         int nolip = 0;
4038         const char *val_buf = buf;
4039         int err;
4040         uint32_t prev_val;
4041         u8 sli_family, if_type;
4042
4043         if (!strncmp(buf, "nolip ", strlen("nolip "))) {
4044                 nolip = 1;
4045                 val_buf = &buf[strlen("nolip ")];
4046         }
4047
4048         if (!isdigit(val_buf[0]))
4049                 return -EINVAL;
4050         if (sscanf(val_buf, "%i", &val) != 1)
4051                 return -EINVAL;
4052
4053         if (val >= 0 && val <= 6) {
4054                 prev_val = phba->cfg_topology;
4055                 if (phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G &&
4056                         val == 4) {
4057                         lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
4058                                 "3113 Loop mode not supported at speed %d\n",
4059                                 val);
4060                         return -EINVAL;
4061                 }
4062                 /*
4063                  * The 'topology' is not a configurable parameter if :
4064                  *   - persistent topology enabled
4065                  *   - ASIC_GEN_NUM >= 0xC, with no private loop support
4066                  */
4067                 sli_family = bf_get(lpfc_sli_intf_sli_family,
4068                                     &phba->sli4_hba.sli_intf);
4069                 if_type = bf_get(lpfc_sli_intf_if_type,
4070                                  &phba->sli4_hba.sli_intf);
4071                 if ((phba->hba_flag & HBA_PERSISTENT_TOPO ||
4072                     (!phba->sli4_hba.pc_sli4_params.pls &&
4073                      (sli_family == LPFC_SLI_INTF_FAMILY_G6 ||
4074                       if_type == LPFC_SLI_INTF_IF_TYPE_6))) &&
4075                     val == 4) {
4076                         lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
4077                                 "3114 Loop mode not supported\n");
4078                         return -EINVAL;
4079                 }
4080                 phba->cfg_topology = val;
4081                 if (nolip)
4082                         return strlen(buf);
4083
4084                 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
4085                         "3054 lpfc_topology changed from %d to %d\n",
4086                         prev_val, val);
4087                 if (prev_val != val && phba->sli_rev == LPFC_SLI_REV4)
4088                         phba->fc_topology_changed = 1;
4089                 err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
4090                 if (err) {
4091                         phba->cfg_topology = prev_val;
4092                         return -EINVAL;
4093                 } else
4094                         return strlen(buf);
4095         }
4096         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4097                 "%d:0467 lpfc_topology attribute cannot be set to %d, "
4098                 "allowed range is [0, 6]\n",
4099                 phba->brd_no, val);
4100         return -EINVAL;
4101 }
4102
4103 lpfc_param_show(topology)
4104 static DEVICE_ATTR_RW(lpfc_topology);
4105
4106 /**
4107  * lpfc_static_vport_show: Read callback function for
4108  *   lpfc_static_vport sysfs file.
4109  * @dev: Pointer to class device object.
4110  * @attr: device attribute structure.
4111  * @buf: Data buffer.
4112  *
4113  * This function is the read call back function for
4114  * lpfc_static_vport sysfs file. The lpfc_static_vport
4115  * sysfs file report the mageability of the vport.
4116  **/
4117 static ssize_t
4118 lpfc_static_vport_show(struct device *dev, struct device_attribute *attr,
4119                          char *buf)
4120 {
4121         struct Scsi_Host  *shost = class_to_shost(dev);
4122         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4123         if (vport->vport_flag & STATIC_VPORT)
4124                 sprintf(buf, "1\n");
4125         else
4126                 sprintf(buf, "0\n");
4127
4128         return strlen(buf);
4129 }
4130
4131 /*
4132  * Sysfs attribute to control the statistical data collection.
4133  */
4134 static DEVICE_ATTR_RO(lpfc_static_vport);
4135
4136 /**
4137  * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file
4138  * @dev: Pointer to class device.
4139  * @attr: Unused.
4140  * @buf: Data buffer.
4141  * @count: Size of the data buffer.
4142  *
4143  * This function get called when a user write to the lpfc_stat_data_ctrl
4144  * sysfs file. This function parse the command written to the sysfs file
4145  * and take appropriate action. These commands are used for controlling
4146  * driver statistical data collection.
4147  * Following are the command this function handles.
4148  *
4149  *    setbucket <bucket_type> <base> <step>
4150  *                             = Set the latency buckets.
4151  *    destroybucket            = destroy all the buckets.
4152  *    start                    = start data collection
4153  *    stop                     = stop data collection
4154  *    reset                    = reset the collected data
4155  **/
4156 static ssize_t
4157 lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
4158                           const char *buf, size_t count)
4159 {
4160         struct Scsi_Host  *shost = class_to_shost(dev);
4161         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4162         struct lpfc_hba   *phba = vport->phba;
4163 #define LPFC_MAX_DATA_CTRL_LEN 1024
4164         static char bucket_data[LPFC_MAX_DATA_CTRL_LEN];
4165         unsigned long i;
4166         char *str_ptr, *token;
4167         struct lpfc_vport **vports;
4168         struct Scsi_Host *v_shost;
4169         char *bucket_type_str, *base_str, *step_str;
4170         unsigned long base, step, bucket_type;
4171
4172         if (!strncmp(buf, "setbucket", strlen("setbucket"))) {
4173                 if (strlen(buf) > (LPFC_MAX_DATA_CTRL_LEN - 1))
4174                         return -EINVAL;
4175
4176                 strncpy(bucket_data, buf, LPFC_MAX_DATA_CTRL_LEN);
4177                 str_ptr = &bucket_data[0];
4178                 /* Ignore this token - this is command token */
4179                 token = strsep(&str_ptr, "\t ");
4180                 if (!token)
4181                         return -EINVAL;
4182
4183                 bucket_type_str = strsep(&str_ptr, "\t ");
4184                 if (!bucket_type_str)
4185                         return -EINVAL;
4186
4187                 if (!strncmp(bucket_type_str, "linear", strlen("linear")))
4188                         bucket_type = LPFC_LINEAR_BUCKET;
4189                 else if (!strncmp(bucket_type_str, "power2", strlen("power2")))
4190                         bucket_type = LPFC_POWER2_BUCKET;
4191                 else
4192                         return -EINVAL;
4193
4194                 base_str = strsep(&str_ptr, "\t ");
4195                 if (!base_str)
4196                         return -EINVAL;
4197                 base = simple_strtoul(base_str, NULL, 0);
4198
4199                 step_str = strsep(&str_ptr, "\t ");
4200                 if (!step_str)
4201                         return -EINVAL;
4202                 step = simple_strtoul(step_str, NULL, 0);
4203                 if (!step)
4204                         return -EINVAL;
4205
4206                 /* Block the data collection for every vport */
4207                 vports = lpfc_create_vport_work_array(phba);
4208                 if (vports == NULL)
4209                         return -ENOMEM;
4210
4211                 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
4212                         v_shost = lpfc_shost_from_vport(vports[i]);
4213                         spin_lock_irq(v_shost->host_lock);
4214                         /* Block and reset data collection */
4215                         vports[i]->stat_data_blocked = 1;
4216                         if (vports[i]->stat_data_enabled)
4217                                 lpfc_vport_reset_stat_data(vports[i]);
4218                         spin_unlock_irq(v_shost->host_lock);
4219                 }
4220
4221                 /* Set the bucket attributes */
4222                 phba->bucket_type = bucket_type;
4223                 phba->bucket_base = base;
4224                 phba->bucket_step = step;
4225
4226                 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
4227                         v_shost = lpfc_shost_from_vport(vports[i]);
4228
4229                         /* Unblock data collection */
4230                         spin_lock_irq(v_shost->host_lock);
4231                         vports[i]->stat_data_blocked = 0;
4232                         spin_unlock_irq(v_shost->host_lock);
4233                 }
4234                 lpfc_destroy_vport_work_array(phba, vports);
4235                 return strlen(buf);
4236         }
4237
4238         if (!strncmp(buf, "destroybucket", strlen("destroybucket"))) {
4239                 vports = lpfc_create_vport_work_array(phba);
4240                 if (vports == NULL)
4241                         return -ENOMEM;
4242
4243                 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
4244                         v_shost = lpfc_shost_from_vport(vports[i]);
4245                         spin_lock_irq(shost->host_lock);
4246                         vports[i]->stat_data_blocked = 1;
4247                         lpfc_free_bucket(vport);
4248                         vport->stat_data_enabled = 0;
4249                         vports[i]->stat_data_blocked = 0;
4250                         spin_unlock_irq(shost->host_lock);
4251                 }
4252                 lpfc_destroy_vport_work_array(phba, vports);
4253                 phba->bucket_type = LPFC_NO_BUCKET;
4254                 phba->bucket_base = 0;
4255                 phba->bucket_step = 0;
4256                 return strlen(buf);
4257         }
4258
4259         if (!strncmp(buf, "start", strlen("start"))) {
4260                 /* If no buckets configured return error */
4261                 if (phba->bucket_type == LPFC_NO_BUCKET)
4262                         return -EINVAL;
4263                 spin_lock_irq(shost->host_lock);
4264                 if (vport->stat_data_enabled) {
4265                         spin_unlock_irq(shost->host_lock);
4266                         return strlen(buf);
4267                 }
4268                 lpfc_alloc_bucket(vport);
4269                 vport->stat_data_enabled = 1;
4270                 spin_unlock_irq(shost->host_lock);
4271                 return strlen(buf);
4272         }
4273
4274         if (!strncmp(buf, "stop", strlen("stop"))) {
4275                 spin_lock_irq(shost->host_lock);
4276                 if (vport->stat_data_enabled == 0) {
4277                         spin_unlock_irq(shost->host_lock);
4278                         return strlen(buf);
4279                 }
4280                 lpfc_free_bucket(vport);
4281                 vport->stat_data_enabled = 0;
4282                 spin_unlock_irq(shost->host_lock);
4283                 return strlen(buf);
4284         }
4285
4286         if (!strncmp(buf, "reset", strlen("reset"))) {
4287                 if ((phba->bucket_type == LPFC_NO_BUCKET)
4288                         || !vport->stat_data_enabled)
4289                         return strlen(buf);
4290                 spin_lock_irq(shost->host_lock);
4291                 vport->stat_data_blocked = 1;
4292                 lpfc_vport_reset_stat_data(vport);
4293                 vport->stat_data_blocked = 0;
4294                 spin_unlock_irq(shost->host_lock);
4295                 return strlen(buf);
4296         }
4297         return -EINVAL;
4298 }
4299
4300
4301 /**
4302  * lpfc_stat_data_ctrl_show - Read function for lpfc_stat_data_ctrl sysfs file
4303  * @dev: Pointer to class device.
4304  * @attr: Unused.
4305  * @buf: Data buffer.
4306  *
4307  * This function is the read call back function for
4308  * lpfc_stat_data_ctrl sysfs file. This function report the
4309  * current statistical data collection state.
4310  **/
4311 static ssize_t
4312 lpfc_stat_data_ctrl_show(struct device *dev, struct device_attribute *attr,
4313                          char *buf)
4314 {
4315         struct Scsi_Host  *shost = class_to_shost(dev);
4316         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4317         struct lpfc_hba   *phba = vport->phba;
4318         int index = 0;
4319         int i;
4320         char *bucket_type;
4321         unsigned long bucket_value;
4322
4323         switch (phba->bucket_type) {
4324         case LPFC_LINEAR_BUCKET:
4325                 bucket_type = "linear";
4326                 break;
4327         case LPFC_POWER2_BUCKET:
4328                 bucket_type = "power2";
4329                 break;
4330         default:
4331                 bucket_type = "No Bucket";
4332                 break;
4333         }
4334
4335         sprintf(&buf[index], "Statistical Data enabled :%d, "
4336                 "blocked :%d, Bucket type :%s, Bucket base :%d,"
4337                 " Bucket step :%d\nLatency Ranges :",
4338                 vport->stat_data_enabled, vport->stat_data_blocked,
4339                 bucket_type, phba->bucket_base, phba->bucket_step);
4340         index = strlen(buf);
4341         if (phba->bucket_type != LPFC_NO_BUCKET) {
4342                 for (i = 0; i < LPFC_MAX_BUCKET_COUNT; i++) {
4343                         if (phba->bucket_type == LPFC_LINEAR_BUCKET)
4344                                 bucket_value = phba->bucket_base +
4345                                         phba->bucket_step * i;
4346                         else
4347                                 bucket_value = phba->bucket_base +
4348                                 (1 << i) * phba->bucket_step;
4349
4350                         if (index + 10 > PAGE_SIZE)
4351                                 break;
4352                         sprintf(&buf[index], "%08ld ", bucket_value);
4353                         index = strlen(buf);
4354                 }
4355         }
4356         sprintf(&buf[index], "\n");
4357         return strlen(buf);
4358 }
4359
4360 /*
4361  * Sysfs attribute to control the statistical data collection.
4362  */
4363 static DEVICE_ATTR_RW(lpfc_stat_data_ctrl);
4364
4365 /*
4366  * lpfc_drvr_stat_data: sysfs attr to get driver statistical data.
4367  */
4368
4369 /*
4370  * Each Bucket takes 11 characters and 1 new line + 17 bytes WWN
4371  * for each target.
4372  */
4373 #define STAT_DATA_SIZE_PER_TARGET(NUM_BUCKETS) ((NUM_BUCKETS) * 11 + 18)
4374 #define MAX_STAT_DATA_SIZE_PER_TARGET \
4375         STAT_DATA_SIZE_PER_TARGET(LPFC_MAX_BUCKET_COUNT)
4376
4377
4378 /**
4379  * sysfs_drvr_stat_data_read - Read function for lpfc_drvr_stat_data attribute
4380  * @filp: sysfs file
4381  * @kobj: Pointer to the kernel object
4382  * @bin_attr: Attribute object
4383  * @buf: Buffer pointer
4384  * @off: File offset
4385  * @count: Buffer size
4386  *
4387  * This function is the read call back function for lpfc_drvr_stat_data
4388  * sysfs file. This function export the statistical data to user
4389  * applications.
4390  **/
4391 static ssize_t
4392 sysfs_drvr_stat_data_read(struct file *filp, struct kobject *kobj,
4393                 struct bin_attribute *bin_attr,
4394                 char *buf, loff_t off, size_t count)
4395 {
4396         struct device *dev = container_of(kobj, struct device,
4397                 kobj);
4398         struct Scsi_Host  *shost = class_to_shost(dev);
4399         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4400         struct lpfc_hba   *phba = vport->phba;
4401         int i = 0, index = 0;
4402         unsigned long nport_index;
4403         struct lpfc_nodelist *ndlp = NULL;
4404         nport_index = (unsigned long)off /
4405                 MAX_STAT_DATA_SIZE_PER_TARGET;
4406
4407         if (!vport->stat_data_enabled || vport->stat_data_blocked
4408                 || (phba->bucket_type == LPFC_NO_BUCKET))
4409                 return 0;
4410
4411         spin_lock_irq(shost->host_lock);
4412         list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
4413                 if (!ndlp->lat_data)
4414                         continue;
4415
4416                 if (nport_index > 0) {
4417                         nport_index--;
4418                         continue;
4419                 }
4420
4421                 if ((index + MAX_STAT_DATA_SIZE_PER_TARGET)
4422                         > count)
4423                         break;
4424
4425                 if (!ndlp->lat_data)
4426                         continue;
4427
4428                 /* Print the WWN */
4429                 sprintf(&buf[index], "%02x%02x%02x%02x%02x%02x%02x%02x:",
4430                         ndlp->nlp_portname.u.wwn[0],
4431                         ndlp->nlp_portname.u.wwn[1],
4432                         ndlp->nlp_portname.u.wwn[2],
4433                         ndlp->nlp_portname.u.wwn[3],
4434                         ndlp->nlp_portname.u.wwn[4],
4435                         ndlp->nlp_portname.u.wwn[5],
4436                         ndlp->nlp_portname.u.wwn[6],
4437                         ndlp->nlp_portname.u.wwn[7]);
4438
4439                 index = strlen(buf);
4440
4441                 for (i = 0; i < LPFC_MAX_BUCKET_COUNT; i++) {
4442                         sprintf(&buf[index], "%010u,",
4443                                 ndlp->lat_data[i].cmd_count);
4444                         index = strlen(buf);
4445                 }
4446                 sprintf(&buf[index], "\n");
4447                 index = strlen(buf);
4448         }
4449         spin_unlock_irq(shost->host_lock);
4450         return index;
4451 }
4452
4453 static struct bin_attribute sysfs_drvr_stat_data_attr = {
4454         .attr = {
4455                 .name = "lpfc_drvr_stat_data",
4456                 .mode = S_IRUSR,
4457         },
4458         .size = LPFC_MAX_TARGET * MAX_STAT_DATA_SIZE_PER_TARGET,
4459         .read = sysfs_drvr_stat_data_read,
4460         .write = NULL,
4461 };
4462
4463 /*
4464 # lpfc_link_speed: Link speed selection for initializing the Fibre Channel
4465 # connection.
4466 # Value range is [0,16]. Default value is 0.
4467 */
4468 /**
4469  * lpfc_link_speed_store - Set the adapters link speed
4470  * @dev: Pointer to class device.
4471  * @attr: Unused.
4472  * @buf: Data buffer.
4473  * @count: Size of the data buffer.
4474  *
4475  * Description:
4476  * If val is in a valid range then set the adapter's link speed field and
4477  * issue a lip; if the lip fails reset the link speed to the old value.
4478  *
4479  * Notes:
4480  * If the value is not in range log a kernel error message and return an error.
4481  *
4482  * Returns:
4483  * zero if val is in range and lip okay.
4484  * non-zero return value from lpfc_issue_lip()
4485  * -EINVAL val out of range
4486  **/
4487 static ssize_t
4488 lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
4489                 const char *buf, size_t count)
4490 {
4491         struct Scsi_Host  *shost = class_to_shost(dev);
4492         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4493         struct lpfc_hba   *phba = vport->phba;
4494         int val = LPFC_USER_LINK_SPEED_AUTO;
4495         int nolip = 0;
4496         const char *val_buf = buf;
4497         int err;
4498         uint32_t prev_val, if_type;
4499
4500         if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
4501         if (if_type >= LPFC_SLI_INTF_IF_TYPE_2 &&
4502             phba->hba_flag & HBA_FORCED_LINK_SPEED)
4503                 return -EPERM;
4504
4505         if (!strncmp(buf, "nolip ", strlen("nolip "))) {
4506                 nolip = 1;
4507                 val_buf = &buf[strlen("nolip ")];
4508         }
4509
4510         if (!isdigit(val_buf[0]))
4511                 return -EINVAL;
4512         if (sscanf(val_buf, "%i", &val) != 1)
4513                 return -EINVAL;
4514
4515         lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
4516                 "3055 lpfc_link_speed changed from %d to %d %s\n",
4517                 phba->cfg_link_speed, val, nolip ? "(nolip)" : "(lip)");
4518
4519         if (((val == LPFC_USER_LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
4520             ((val == LPFC_USER_LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
4521             ((val == LPFC_USER_LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
4522             ((val == LPFC_USER_LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) ||
4523             ((val == LPFC_USER_LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)) ||
4524             ((val == LPFC_USER_LINK_SPEED_16G) && !(phba->lmt & LMT_16Gb)) ||
4525             ((val == LPFC_USER_LINK_SPEED_32G) && !(phba->lmt & LMT_32Gb)) ||
4526             ((val == LPFC_USER_LINK_SPEED_64G) && !(phba->lmt & LMT_64Gb))) {
4527                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4528                                 "2879 lpfc_link_speed attribute cannot be set "
4529                                 "to %d. Speed is not supported by this port.\n",
4530                                 val);
4531                 return -EINVAL;
4532         }
4533         if (val >= LPFC_USER_LINK_SPEED_16G &&
4534             phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
4535                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4536                                 "3112 lpfc_link_speed attribute cannot be set "
4537                                 "to %d. Speed is not supported in loop mode.\n",
4538                                 val);
4539                 return -EINVAL;
4540         }
4541
4542         switch (val) {
4543         case LPFC_USER_LINK_SPEED_AUTO:
4544         case LPFC_USER_LINK_SPEED_1G:
4545         case LPFC_USER_LINK_SPEED_2G:
4546         case LPFC_USER_LINK_SPEED_4G:
4547         case LPFC_USER_LINK_SPEED_8G:
4548         case LPFC_USER_LINK_SPEED_16G:
4549         case LPFC_USER_LINK_SPEED_32G:
4550         case LPFC_USER_LINK_SPEED_64G:
4551                 prev_val = phba->cfg_link_speed;
4552                 phba->cfg_link_speed = val;
4553                 if (nolip)
4554                         return strlen(buf);
4555
4556                 err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
4557                 if (err) {
4558                         phba->cfg_link_speed = prev_val;
4559                         return -EINVAL;
4560                 }
4561                 return strlen(buf);
4562         default:
4563                 break;
4564         }
4565
4566         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4567                         "0469 lpfc_link_speed attribute cannot be set to %d, "
4568                         "allowed values are [%s]\n",
4569                         val, LPFC_LINK_SPEED_STRING);
4570         return -EINVAL;
4571
4572 }
4573
4574 static int lpfc_link_speed = 0;
4575 module_param(lpfc_link_speed, int, S_IRUGO);
4576 MODULE_PARM_DESC(lpfc_link_speed, "Select link speed");
4577 lpfc_param_show(link_speed)
4578
4579 /**
4580  * lpfc_link_speed_init - Set the adapters link speed
4581  * @phba: lpfc_hba pointer.
4582  * @val: link speed value.
4583  *
4584  * Description:
4585  * If val is in a valid range then set the adapter's link speed field.
4586  *
4587  * Notes:
4588  * If the value is not in range log a kernel error message, clear the link
4589  * speed and return an error.
4590  *
4591  * Returns:
4592  * zero if val saved.
4593  * -EINVAL val out of range
4594  **/
4595 static int
4596 lpfc_link_speed_init(struct lpfc_hba *phba, int val)
4597 {
4598         if (val >= LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) {
4599                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4600                         "3111 lpfc_link_speed of %d cannot "
4601                         "support loop mode, setting topology to default.\n",
4602                          val);
4603                 phba->cfg_topology = 0;
4604         }
4605
4606         switch (val) {
4607         case LPFC_USER_LINK_SPEED_AUTO:
4608         case LPFC_USER_LINK_SPEED_1G:
4609         case LPFC_USER_LINK_SPEED_2G:
4610         case LPFC_USER_LINK_SPEED_4G:
4611         case LPFC_USER_LINK_SPEED_8G:
4612         case LPFC_USER_LINK_SPEED_16G:
4613         case LPFC_USER_LINK_SPEED_32G:
4614         case LPFC_USER_LINK_SPEED_64G:
4615                 phba->cfg_link_speed = val;
4616                 return 0;
4617         default:
4618                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4619                                 "0405 lpfc_link_speed attribute cannot "
4620                                 "be set to %d, allowed values are "
4621                                 "["LPFC_LINK_SPEED_STRING"]\n", val);
4622                 phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;
4623                 return -EINVAL;
4624         }
4625 }
4626
4627 static DEVICE_ATTR_RW(lpfc_link_speed);
4628
4629 /*
4630 # lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER)
4631 #       0  = aer disabled or not supported
4632 #       1  = aer supported and enabled (default)
4633 # Value range is [0,1]. Default value is 1.
4634 */
4635 LPFC_ATTR(aer_support, 1, 0, 1,
4636         "Enable PCIe device AER support");
4637 lpfc_param_show(aer_support)
4638
4639 /**
4640  * lpfc_aer_support_store - Set the adapter for aer support
4641  *
4642  * @dev: class device that is converted into a Scsi_host.
4643  * @attr: device attribute, not used.
4644  * @buf: containing enable or disable aer flag.
4645  * @count: unused variable.
4646  *
4647  * Description:
4648  * If the val is 1 and currently the device's AER capability was not
4649  * enabled, invoke the kernel's enable AER helper routine, trying to
4650  * enable the device's AER capability. If the helper routine enabling
4651  * AER returns success, update the device's cfg_aer_support flag to
4652  * indicate AER is supported by the device; otherwise, if the device
4653  * AER capability is already enabled to support AER, then do nothing.
4654  *
4655  * If the val is 0 and currently the device's AER support was enabled,
4656  * invoke the kernel's disable AER helper routine. After that, update
4657  * the device's cfg_aer_support flag to indicate AER is not supported
4658  * by the device; otherwise, if the device AER capability is already
4659  * disabled from supporting AER, then do nothing.
4660  *
4661  * Returns:
4662  * length of the buf on success if val is in range the intended mode
4663  * is supported.
4664  * -EINVAL if val out of range or intended mode is not supported.
4665  **/
4666 static ssize_t
4667 lpfc_aer_support_store(struct device *dev, struct device_attribute *attr,
4668                        const char *buf, size_t count)
4669 {
4670         struct Scsi_Host *shost = class_to_shost(dev);
4671         struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
4672         struct lpfc_hba *phba = vport->phba;
4673         int val = 0, rc = -EINVAL;
4674
4675         if (!isdigit(buf[0]))
4676                 return -EINVAL;
4677         if (sscanf(buf, "%i", &val) != 1)
4678                 return -EINVAL;
4679
4680         switch (val) {
4681         case 0:
4682                 if (phba->hba_flag & HBA_AER_ENABLED) {
4683                         rc = pci_disable_pcie_error_reporting(phba->pcidev);
4684                         if (!rc) {
4685                                 spin_lock_irq(&phba->hbalock);
4686                                 phba->hba_flag &= ~HBA_AER_ENABLED;
4687                                 spin_unlock_irq(&phba->hbalock);
4688                                 phba->cfg_aer_support = 0;
4689                                 rc = strlen(buf);
4690                         } else
4691                                 rc = -EPERM;
4692                 } else {
4693                         phba->cfg_aer_support = 0;
4694                         rc = strlen(buf);
4695                 }
4696                 break;
4697         case 1:
4698                 if (!(phba->hba_flag & HBA_AER_ENABLED)) {
4699                         rc = pci_enable_pcie_error_reporting(phba->pcidev);
4700                         if (!rc) {
4701                                 spin_lock_irq(&phba->hbalock);
4702                                 phba->hba_flag |= HBA_AER_ENABLED;
4703                                 spin_unlock_irq(&phba->hbalock);
4704                                 phba->cfg_aer_support = 1;
4705                                 rc = strlen(buf);
4706                         } else
4707                                  rc = -EPERM;
4708                 } else {
4709                         phba->cfg_aer_support = 1;
4710                         rc = strlen(buf);
4711                 }
4712                 break;
4713         default:
4714                 rc = -EINVAL;
4715                 break;
4716         }
4717         return rc;
4718 }
4719
4720 static DEVICE_ATTR_RW(lpfc_aer_support);
4721
4722 /**
4723  * lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device
4724  * @dev: class device that is converted into a Scsi_host.
4725  * @attr: device attribute, not used.
4726  * @buf: containing flag 1 for aer cleanup state.
4727  * @count: unused variable.
4728  *
4729  * Description:
4730  * If the @buf contains 1 and the device currently has the AER support
4731  * enabled, then invokes the kernel AER helper routine
4732  * pci_aer_clear_nonfatal_status() to clean up the uncorrectable
4733  * error status register.
4734  *
4735  * Notes:
4736  *
4737  * Returns:
4738  * -EINVAL if the buf does not contain the 1 or the device is not currently
4739  * enabled with the AER support.
4740  **/
4741 static ssize_t
4742 lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr,
4743                        const char *buf, size_t count)
4744 {
4745         struct Scsi_Host  *shost = class_to_shost(dev);
4746         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4747         struct lpfc_hba   *phba = vport->phba;
4748         int val, rc = -1;
4749
4750         if (!isdigit(buf[0]))
4751                 return -EINVAL;
4752         if (sscanf(buf, "%i", &val) != 1)
4753                 return -EINVAL;
4754         if (val != 1)
4755                 return -EINVAL;
4756
4757         if (phba->hba_flag & HBA_AER_ENABLED)
4758                 rc = pci_aer_clear_nonfatal_status(phba->pcidev);
4759
4760         if (rc == 0)
4761                 return strlen(buf);
4762         else
4763                 return -EPERM;
4764 }
4765
4766 static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL,
4767                    lpfc_aer_cleanup_state);
4768
4769 /**
4770  * lpfc_sriov_nr_virtfn_store - Enable the adapter for sr-iov virtual functions
4771  *
4772  * @dev: class device that is converted into a Scsi_host.
4773  * @attr: device attribute, not used.
4774  * @buf: containing the string the number of vfs to be enabled.
4775  * @count: unused variable.
4776  *
4777  * Description:
4778  * When this api is called either through user sysfs, the driver shall
4779  * try to enable or disable SR-IOV virtual functions according to the
4780  * following:
4781  *
4782  * If zero virtual function has been enabled to the physical function,
4783  * the driver shall invoke the pci enable virtual function api trying
4784  * to enable the virtual functions. If the nr_vfn provided is greater
4785  * than the maximum supported, the maximum virtual function number will
4786  * be used for invoking the api; otherwise, the nr_vfn provided shall
4787  * be used for invoking the api. If the api call returned success, the
4788  * actual number of virtual functions enabled will be set to the driver
4789  * cfg_sriov_nr_virtfn; otherwise, -EINVAL shall be returned and driver
4790  * cfg_sriov_nr_virtfn remains zero.
4791  *
4792  * If none-zero virtual functions have already been enabled to the
4793  * physical function, as reflected by the driver's cfg_sriov_nr_virtfn,
4794  * -EINVAL will be returned and the driver does nothing;
4795  *
4796  * If the nr_vfn provided is zero and none-zero virtual functions have
4797  * been enabled, as indicated by the driver's cfg_sriov_nr_virtfn, the
4798  * disabling virtual function api shall be invoded to disable all the
4799  * virtual functions and driver's cfg_sriov_nr_virtfn shall be set to
4800  * zero. Otherwise, if zero virtual function has been enabled, do
4801  * nothing.
4802  *
4803  * Returns:
4804  * length of the buf on success if val is in range the intended mode
4805  * is supported.
4806  * -EINVAL if val out of range or intended mode is not supported.
4807  **/
4808 static ssize_t
4809 lpfc_sriov_nr_virtfn_store(struct device *dev, struct device_attribute *attr,
4810                          const char *buf, size_t count)
4811 {
4812         struct Scsi_Host *shost = class_to_shost(dev);
4813         struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
4814         struct lpfc_hba *phba = vport->phba;
4815         struct pci_dev *pdev = phba->pcidev;
4816         int val = 0, rc = -EINVAL;
4817
4818         /* Sanity check on user data */
4819         if (!isdigit(buf[0]))
4820                 return -EINVAL;
4821         if (sscanf(buf, "%i", &val) != 1)
4822                 return -EINVAL;
4823         if (val < 0)
4824                 return -EINVAL;
4825
4826         /* Request disabling virtual functions */
4827         if (val == 0) {
4828                 if (phba->cfg_sriov_nr_virtfn > 0) {
4829                         pci_disable_sriov(pdev);
4830                         phba->cfg_sriov_nr_virtfn = 0;
4831                 }
4832                 return strlen(buf);
4833         }
4834
4835         /* Request enabling virtual functions */
4836         if (phba->cfg_sriov_nr_virtfn > 0) {
4837                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4838                                 "3018 There are %d virtual functions "
4839                                 "enabled on physical function.\n",
4840                                 phba->cfg_sriov_nr_virtfn);
4841                 return -EEXIST;
4842         }
4843
4844         if (val <= LPFC_MAX_VFN_PER_PFN)
4845                 phba->cfg_sriov_nr_virtfn = val;
4846         else {
4847                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4848                                 "3019 Enabling %d virtual functions is not "
4849                                 "allowed.\n", val);
4850                 return -EINVAL;
4851         }
4852
4853         rc = lpfc_sli_probe_sriov_nr_virtfn(phba, phba->cfg_sriov_nr_virtfn);
4854         if (rc) {
4855                 phba->cfg_sriov_nr_virtfn = 0;
4856                 rc = -EPERM;
4857         } else
4858                 rc = strlen(buf);
4859
4860         return rc;
4861 }
4862
4863 LPFC_ATTR(sriov_nr_virtfn, LPFC_DEF_VFN_PER_PFN, 0, LPFC_MAX_VFN_PER_PFN,
4864         "Enable PCIe device SR-IOV virtual fn");
4865
4866 lpfc_param_show(sriov_nr_virtfn)
4867 static DEVICE_ATTR_RW(lpfc_sriov_nr_virtfn);
4868
4869 /**
4870  * lpfc_request_firmware_upgrade_store - Request for Linux generic firmware upgrade
4871  *
4872  * @dev: class device that is converted into a Scsi_host.
4873  * @attr: device attribute, not used.
4874  * @buf: containing the string the number of vfs to be enabled.
4875  * @count: unused variable.
4876  *
4877  * Description:
4878  *
4879  * Returns:
4880  * length of the buf on success if val is in range the intended mode
4881  * is supported.
4882  * -EINVAL if val out of range or intended mode is not supported.
4883  **/
4884 static ssize_t
4885 lpfc_request_firmware_upgrade_store(struct device *dev,
4886                                     struct device_attribute *attr,
4887                                     const char *buf, size_t count)
4888 {
4889         struct Scsi_Host *shost = class_to_shost(dev);
4890         struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
4891         struct lpfc_hba *phba = vport->phba;
4892         int val = 0, rc;
4893
4894         /* Sanity check on user data */
4895         if (!isdigit(buf[0]))
4896                 return -EINVAL;
4897         if (sscanf(buf, "%i", &val) != 1)
4898                 return -EINVAL;
4899         if (val != 1)
4900                 return -EINVAL;
4901
4902         rc = lpfc_sli4_request_firmware_update(phba, RUN_FW_UPGRADE);
4903         if (rc)
4904                 rc = -EPERM;
4905         else
4906                 rc = strlen(buf);
4907         return rc;
4908 }
4909
4910 static int lpfc_req_fw_upgrade;
4911 module_param(lpfc_req_fw_upgrade, int, S_IRUGO|S_IWUSR);
4912 MODULE_PARM_DESC(lpfc_req_fw_upgrade, "Enable Linux generic firmware upgrade");
4913 lpfc_param_show(request_firmware_upgrade)
4914
4915 /**
4916  * lpfc_request_firmware_upgrade_init - Enable initial linux generic fw upgrade
4917  * @phba: lpfc_hba pointer.
4918  * @val: 0 or 1.
4919  *
4920  * Description:
4921  * Set the initial Linux generic firmware upgrade enable or disable flag.
4922  *
4923  * Returns:
4924  * zero if val saved.
4925  * -EINVAL val out of range
4926  **/
4927 static int
4928 lpfc_request_firmware_upgrade_init(struct lpfc_hba *phba, int val)
4929 {
4930         if (val >= 0 && val <= 1) {
4931                 phba->cfg_request_firmware_upgrade = val;
4932                 return 0;
4933         }
4934         return -EINVAL;
4935 }
4936 static DEVICE_ATTR(lpfc_req_fw_upgrade, S_IRUGO | S_IWUSR,
4937                    lpfc_request_firmware_upgrade_show,
4938                    lpfc_request_firmware_upgrade_store);
4939
4940 /**
4941  * lpfc_force_rscn_store
4942  *
4943  * @dev: class device that is converted into a Scsi_host.
4944  * @attr: device attribute, not used.
4945  * @buf: unused string
4946  * @count: unused variable.
4947  *
4948  * Description:
4949  * Force the switch to send a RSCN to all other NPorts in our zone
4950  * If we are direct connect pt2pt, build the RSCN command ourself
4951  * and send to the other NPort. Not supported for private loop.
4952  *
4953  * Returns:
4954  * 0      - on success
4955  * -EIO   - if command is not sent
4956  **/
4957 static ssize_t
4958 lpfc_force_rscn_store(struct device *dev, struct device_attribute *attr,
4959                       const char *buf, size_t count)
4960 {
4961         struct Scsi_Host *shost = class_to_shost(dev);
4962         struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
4963         int i;
4964
4965         i = lpfc_issue_els_rscn(vport, 0);
4966         if (i)
4967                 return -EIO;
4968         return strlen(buf);
4969 }
4970
4971 /*
4972  * lpfc_force_rscn: Force an RSCN to be sent to all remote NPorts
4973  * connected to  the HBA.
4974  *
4975  * Value range is any ascii value
4976  */
4977 static int lpfc_force_rscn;
4978 module_param(lpfc_force_rscn, int, 0644);
4979 MODULE_PARM_DESC(lpfc_force_rscn,
4980                  "Force an RSCN to be sent to all remote NPorts");
4981 lpfc_param_show(force_rscn)
4982
4983 /**
4984  * lpfc_force_rscn_init - Force an RSCN to be sent to all remote NPorts
4985  * @phba: lpfc_hba pointer.
4986  * @val: unused value.
4987  *
4988  * Returns:
4989  * zero if val saved.
4990  **/
4991 static int
4992 lpfc_force_rscn_init(struct lpfc_hba *phba, int val)
4993 {
4994         return 0;
4995 }
4996 static DEVICE_ATTR_RW(lpfc_force_rscn);
4997
4998 /**
4999  * lpfc_fcp_imax_store
5000  *
5001  * @dev: class device that is converted into a Scsi_host.
5002  * @attr: device attribute, not used.
5003  * @buf: string with the number of fast-path FCP interrupts per second.
5004  * @count: unused variable.
5005  *
5006  * Description:
5007  * If val is in a valid range [636,651042], then set the adapter's
5008  * maximum number of fast-path FCP interrupts per second.
5009  *
5010  * Returns:
5011  * length of the buf on success if val is in range the intended mode
5012  * is supported.
5013  * -EINVAL if val out of range or intended mode is not supported.
5014  **/
5015 static ssize_t
5016 lpfc_fcp_imax_store(struct device *dev, struct device_attribute *attr,
5017                          const char *buf, size_t count)
5018 {
5019         struct Scsi_Host *shost = class_to_shost(dev);
5020         struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
5021         struct lpfc_hba *phba = vport->phba;
5022         struct lpfc_eq_intr_info *eqi;
5023         uint32_t usdelay;
5024         int val = 0, i;
5025
5026         /* fcp_imax is only valid for SLI4 */
5027         if (phba->sli_rev != LPFC_SLI_REV4)
5028                 return -EINVAL;
5029
5030         /* Sanity check on user data */
5031         if (!isdigit(buf[0]))
5032                 return -EINVAL;
5033         if (sscanf(buf, "%i", &val) != 1)
5034                 return -EINVAL;
5035
5036         /*
5037          * Value range for the HBA is [5000,5000000]
5038          * The value for each EQ depends on how many EQs are configured.
5039          * Allow value == 0
5040          */
5041         if (val && (val < LPFC_MIN_IMAX || val > LPFC_MAX_IMAX))
5042                 return -EINVAL;
5043
5044         phba->cfg_auto_imax = (val) ? 0 : 1;
5045         if (phba->cfg_fcp_imax && !val) {
5046                 queue_delayed_work(phba->wq, &phba->eq_delay_work,
5047                                    msecs_to_jiffies(LPFC_EQ_DELAY_MSECS));
5048
5049                 for_each_present_cpu(i) {
5050                         eqi = per_cpu_ptr(phba->sli4_hba.eq_info, i);
5051                         eqi->icnt = 0;
5052                 }
5053         }
5054
5055         phba->cfg_fcp_imax = (uint32_t)val;
5056
5057         if (phba->cfg_fcp_imax)
5058                 usdelay = LPFC_SEC_TO_USEC / phba->cfg_fcp_imax;
5059         else
5060                 usdelay = 0;
5061
5062         for (i = 0; i < phba->cfg_irq_chann; i += LPFC_MAX_EQ_DELAY_EQID_CNT)
5063                 lpfc_modify_hba_eq_delay(phba, i, LPFC_MAX_EQ_DELAY_EQID_CNT,
5064                                          usdelay);
5065
5066         return strlen(buf);
5067 }
5068
5069 /*
5070 # lpfc_fcp_imax: The maximum number of fast-path FCP interrupts per second
5071 # for the HBA.
5072 #
5073 # Value range is [5,000 to 5,000,000]. Default value is 50,000.
5074 */
5075 static int lpfc_fcp_imax = LPFC_DEF_IMAX;
5076 module_param(lpfc_fcp_imax, int, S_IRUGO|S_IWUSR);
5077 MODULE_PARM_DESC(lpfc_fcp_imax,
5078             "Set the maximum number of FCP interrupts per second per HBA");
5079 lpfc_param_show(fcp_imax)
5080
5081 /**
5082  * lpfc_fcp_imax_init - Set the initial sr-iov virtual function enable
5083  * @phba: lpfc_hba pointer.
5084  * @val: link speed value.
5085  *
5086  * Description:
5087  * If val is in a valid range [636,651042], then initialize the adapter's
5088  * maximum number of fast-path FCP interrupts per second.
5089  *
5090  * Returns:
5091  * zero if val saved.
5092  * -EINVAL val out of range
5093  **/
5094 static int
5095 lpfc_fcp_imax_init(struct lpfc_hba *phba, int val)
5096 {
5097         if (phba->sli_rev != LPFC_SLI_REV4) {
5098                 phba->cfg_fcp_imax = 0;
5099                 return 0;
5100         }
5101
5102         if ((val >= LPFC_MIN_IMAX && val <= LPFC_MAX_IMAX) ||
5103             (val == 0)) {
5104                 phba->cfg_fcp_imax = val;
5105                 return 0;
5106         }
5107
5108         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5109                         "3016 lpfc_fcp_imax: %d out of range, using default\n",
5110                         val);
5111         phba->cfg_fcp_imax = LPFC_DEF_IMAX;
5112
5113         return 0;
5114 }
5115
5116 static DEVICE_ATTR_RW(lpfc_fcp_imax);
5117
5118 /**
5119  * lpfc_cq_max_proc_limit_store
5120  *
5121  * @dev: class device that is converted into a Scsi_host.
5122  * @attr: device attribute, not used.
5123  * @buf: string with the cq max processing limit of cqes
5124  * @count: unused variable.
5125  *
5126  * Description:
5127  * If val is in a valid range, then set value on each cq
5128  *
5129  * Returns:
5130  * The length of the buf: if successful
5131  * -ERANGE: if val is not in the valid range
5132  * -EINVAL: if bad value format or intended mode is not supported.
5133  **/
5134 static ssize_t
5135 lpfc_cq_max_proc_limit_store(struct device *dev, struct device_attribute *attr,
5136                          const char *buf, size_t count)
5137 {
5138         struct Scsi_Host *shost = class_to_shost(dev);
5139         struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
5140         struct lpfc_hba *phba = vport->phba;
5141         struct lpfc_queue *eq, *cq;
5142         unsigned long val;
5143         int i;
5144
5145         /* cq_max_proc_limit is only valid for SLI4 */
5146         if (phba->sli_rev != LPFC_SLI_REV4)
5147                 return -EINVAL;
5148
5149         /* Sanity check on user data */
5150         if (!isdigit(buf[0]))
5151                 return -EINVAL;
5152         if (kstrtoul(buf, 0, &val))
5153                 return -EINVAL;
5154
5155         if (val < LPFC_CQ_MIN_PROC_LIMIT || val > LPFC_CQ_MAX_PROC_LIMIT)
5156                 return -ERANGE;
5157
5158         phba->cfg_cq_max_proc_limit = (uint32_t)val;
5159
5160         /* set the values on the cq's */
5161         for (i = 0; i < phba->cfg_irq_chann; i++) {
5162                 /* Get the EQ corresponding to the IRQ vector */
5163                 eq = phba->sli4_hba.hba_eq_hdl[i].eq;
5164                 if (!eq)
5165                         continue;
5166
5167                 list_for_each_entry(cq, &eq->child_list, list)
5168                         cq->max_proc_limit = min(phba->cfg_cq_max_proc_limit,
5169                                                  cq->entry_count);
5170         }
5171
5172         return strlen(buf);
5173 }
5174
5175 /*
5176  * lpfc_cq_max_proc_limit: The maximum number CQE entries processed in an
5177  *   itteration of CQ processing.
5178  */
5179 static int lpfc_cq_max_proc_limit = LPFC_CQ_DEF_MAX_PROC_LIMIT;
5180 module_param(lpfc_cq_max_proc_limit, int, 0644);
5181 MODULE_PARM_DESC(lpfc_cq_max_proc_limit,
5182             "Set the maximum number CQEs processed in an iteration of "
5183             "CQ processing");
5184 lpfc_param_show(cq_max_proc_limit)
5185
5186 /*
5187  * lpfc_cq_poll_threshold: Set the threshold of CQE completions in a
5188  *   single handler call which should request a polled completion rather
5189  *   than re-enabling interrupts.
5190  */
5191 LPFC_ATTR_RW(cq_poll_threshold, LPFC_CQ_DEF_THRESHOLD_TO_POLL,
5192              LPFC_CQ_MIN_THRESHOLD_TO_POLL,
5193              LPFC_CQ_MAX_THRESHOLD_TO_POLL,
5194              "CQE Processing Threshold to enable Polling");
5195
5196 /**
5197  * lpfc_cq_max_proc_limit_init - Set the initial cq max_proc_limit
5198  * @phba: lpfc_hba pointer.
5199  * @val: entry limit
5200  *
5201  * Description:
5202  * If val is in a valid range, then initialize the adapter's maximum
5203  * value.
5204  *
5205  * Returns:
5206  *  Always returns 0 for success, even if value not always set to
5207  *  requested value. If value out of range or not supported, will fall
5208  *  back to default.
5209  **/
5210 static int
5211 lpfc_cq_max_proc_limit_init(struct lpfc_hba *phba, int val)
5212 {
5213         phba->cfg_cq_max_proc_limit = LPFC_CQ_DEF_MAX_PROC_LIMIT;
5214
5215         if (phba->sli_rev != LPFC_SLI_REV4)
5216                 return 0;
5217
5218         if (val >= LPFC_CQ_MIN_PROC_LIMIT && val <= LPFC_CQ_MAX_PROC_LIMIT) {
5219                 phba->cfg_cq_max_proc_limit = val;
5220                 return 0;
5221         }
5222
5223         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5224                         "0371 lpfc_cq_max_proc_limit: %d out of range, using "
5225                         "default\n",
5226                         phba->cfg_cq_max_proc_limit);
5227
5228         return 0;
5229 }
5230
5231 static DEVICE_ATTR_RW(lpfc_cq_max_proc_limit);
5232
5233 /**
5234  * lpfc_fcp_cpu_map_show - Display current driver CPU affinity
5235  * @dev: class converted to a Scsi_host structure.
5236  * @attr: device attribute, not used.
5237  * @buf: on return contains text describing the state of the link.
5238  *
5239  * Returns: size of formatted string.
5240  **/
5241 static ssize_t
5242 lpfc_fcp_cpu_map_show(struct device *dev, struct device_attribute *attr,
5243                       char *buf)
5244 {
5245         struct Scsi_Host  *shost = class_to_shost(dev);
5246         struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
5247         struct lpfc_hba   *phba = vport->phba;
5248         struct lpfc_vector_map_info *cpup;
5249         int  len = 0;
5250
5251         if ((phba->sli_rev != LPFC_SLI_REV4) ||
5252             (phba->intr_type != MSIX))
5253                 return len;
5254
5255         switch (phba->cfg_fcp_cpu_map) {
5256         case 0:
5257                 len += scnprintf(buf + len, PAGE_SIZE-len,
5258                                 "fcp_cpu_map: No mapping (%d)\n",
5259                                 phba->cfg_fcp_cpu_map);
5260                 return len;
5261         case 1:
5262                 len += scnprintf(buf + len, PAGE_SIZE-len,
5263                                 "fcp_cpu_map: HBA centric mapping (%d): "
5264                                 "%d of %d CPUs online from %d possible CPUs\n",
5265                                 phba->cfg_fcp_cpu_map, num_online_cpus(),
5266                                 num_present_cpus(),
5267                                 phba->sli4_hba.num_possible_cpu);
5268                 break;
5269         }
5270
5271         while (phba->sli4_hba.curr_disp_cpu <
5272                phba->sli4_hba.num_possible_cpu) {
5273                 cpup = &phba->sli4_hba.cpu_map[phba->sli4_hba.curr_disp_cpu];
5274
5275                 if (!cpu_present(phba->sli4_hba.curr_disp_cpu))
5276                         len += scnprintf(buf + len, PAGE_SIZE - len,
5277                                         "CPU %02d not present\n",
5278                                         phba->sli4_hba.curr_disp_cpu);
5279                 else if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) {
5280                         if (cpup->hdwq == LPFC_VECTOR_MAP_EMPTY)
5281                                 len += scnprintf(
5282                                         buf + len, PAGE_SIZE - len,
5283                                         "CPU %02d hdwq None "
5284                                         "physid %d coreid %d ht %d ua %d\n",
5285                                         phba->sli4_hba.curr_disp_cpu,
5286                                         cpup->phys_id, cpup->core_id,
5287                                         (cpup->flag & LPFC_CPU_MAP_HYPER),
5288                                         (cpup->flag & LPFC_CPU_MAP_UNASSIGN));
5289                         else
5290                                 len += scnprintf(
5291                                         buf + len, PAGE_SIZE - len,
5292                                         "CPU %02d EQ None hdwq %04d "
5293                                         "physid %d coreid %d ht %d ua %d\n",
5294                                         phba->sli4_hba.curr_disp_cpu,
5295                                         cpup->hdwq, cpup->phys_id,
5296                                         cpup->core_id,
5297                                         (cpup->flag & LPFC_CPU_MAP_HYPER),
5298                                         (cpup->flag & LPFC_CPU_MAP_UNASSIGN));
5299                 } else {
5300                         if (cpup->hdwq == LPFC_VECTOR_MAP_EMPTY)
5301                                 len += scnprintf(
5302                                         buf + len, PAGE_SIZE - len,
5303                                         "CPU %02d hdwq None "
5304                                         "physid %d coreid %d ht %d ua %d IRQ %d\n",
5305                                         phba->sli4_hba.curr_disp_cpu,
5306                                         cpup->phys_id,
5307                                         cpup->core_id,
5308                                         (cpup->flag & LPFC_CPU_MAP_HYPER),
5309                                         (cpup->flag & LPFC_CPU_MAP_UNASSIGN),
5310                                         lpfc_get_irq(cpup->eq));
5311                         else
5312                                 len += scnprintf(
5313                                         buf + len, PAGE_SIZE - len,
5314                                         "CPU %02d EQ %04d hdwq %04d "
5315                                         "physid %d coreid %d ht %d ua %d IRQ %d\n",
5316                                         phba->sli4_hba.curr_disp_cpu,
5317                                         cpup->eq, cpup->hdwq, cpup->phys_id,
5318                                         cpup->core_id,
5319                                         (cpup->flag & LPFC_CPU_MAP_HYPER),
5320                                         (cpup->flag & LPFC_CPU_MAP_UNASSIGN),
5321                                         lpfc_get_irq(cpup->eq));
5322                 }
5323
5324                 phba->sli4_hba.curr_disp_cpu++;
5325
5326                 /* display max number of CPUs keeping some margin */
5327                 if (phba->sli4_hba.curr_disp_cpu <
5328                                 phba->sli4_hba.num_possible_cpu &&
5329                                 (len >= (PAGE_SIZE - 64))) {
5330                         len += scnprintf(buf + len,
5331                                         PAGE_SIZE - len, "more...\n");
5332                         break;
5333                 }
5334         }
5335
5336         if (phba->sli4_hba.curr_disp_cpu == phba->sli4_hba.num_possible_cpu)
5337                 phba->sli4_hba.curr_disp_cpu = 0;
5338
5339         return len;
5340 }
5341
5342 /**
5343  * lpfc_fcp_cpu_map_store - Change CPU affinity of driver vectors
5344  * @dev: class device that is converted into a Scsi_host.
5345  * @attr: device attribute, not used.
5346  * @buf: one or more lpfc_polling_flags values.
5347  * @count: not used.
5348  *
5349  * Returns:
5350  * -EINVAL  - Not implemented yet.
5351  **/
5352 static ssize_t
5353 lpfc_fcp_cpu_map_store(struct device *dev, struct device_attribute *attr,
5354                        const char *buf, size_t count)
5355 {
5356         return -EINVAL;
5357 }
5358
5359 /*
5360 # lpfc_fcp_cpu_map: Defines how to map CPUs to IRQ vectors
5361 # for the HBA.
5362 #
5363 # Value range is [0 to 1]. Default value is LPFC_HBA_CPU_MAP (1).
5364 #       0 - Do not affinitze IRQ vectors
5365 #       1 - Affintize HBA vectors with respect to each HBA
5366 #           (start with CPU0 for each HBA)
5367 # This also defines how Hardware Queues are mapped to specific CPUs.
5368 */
5369 static int lpfc_fcp_cpu_map = LPFC_HBA_CPU_MAP;
5370 module_param(lpfc_fcp_cpu_map, int, S_IRUGO|S_IWUSR);
5371 MODULE_PARM_DESC(lpfc_fcp_cpu_map,
5372                  "Defines how to map CPUs to IRQ vectors per HBA");
5373
5374 /**
5375  * lpfc_fcp_cpu_map_init - Set the initial sr-iov virtual function enable
5376  * @phba: lpfc_hba pointer.
5377  * @val: link speed value.
5378  *
5379  * Description:
5380  * If val is in a valid range [0-2], then affinitze the adapter's
5381  * MSIX vectors.
5382  *
5383  * Returns:
5384  * zero if val saved.
5385  * -EINVAL val out of range
5386  **/
5387 static int
5388 lpfc_fcp_cpu_map_init(struct lpfc_hba *phba, int val)
5389 {
5390         if (phba->sli_rev != LPFC_SLI_REV4) {
5391                 phba->cfg_fcp_cpu_map = 0;
5392                 return 0;
5393         }
5394
5395         if (val >= LPFC_MIN_CPU_MAP && val <= LPFC_MAX_CPU_MAP) {
5396                 phba->cfg_fcp_cpu_map = val;
5397                 return 0;
5398         }
5399
5400         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5401                         "3326 lpfc_fcp_cpu_map: %d out of range, using "
5402                         "default\n", val);
5403         phba->cfg_fcp_cpu_map = LPFC_HBA_CPU_MAP;
5404
5405         return 0;
5406 }
5407
5408 static DEVICE_ATTR_RW(lpfc_fcp_cpu_map);
5409
5410 /*
5411 # lpfc_fcp_class:  Determines FC class to use for the FCP protocol.
5412 # Value range is [2,3]. Default value is 3.
5413 */
5414 LPFC_VPORT_ATTR_R(fcp_class, 3, 2, 3,
5415                   "Select Fibre Channel class of service for FCP sequences");
5416
5417 /*
5418 # lpfc_use_adisc: Use ADISC for FCP rediscovery instead of PLOGI. Value range
5419 # is [0,1]. Default value is 1.
5420 */
5421 LPFC_VPORT_ATTR_RW(use_adisc, 1, 0, 1,
5422                    "Use ADISC on rediscovery to authenticate FCP devices");
5423
5424 /*
5425 # lpfc_first_burst_size: First burst size to use on the NPorts
5426 # that support first burst.
5427 # Value range is [0,65536]. Default value is 0.
5428 */
5429 LPFC_VPORT_ATTR_RW(first_burst_size, 0, 0, 65536,
5430                    "First burst size for Targets that support first burst");
5431
5432 /*
5433 * lpfc_nvmet_fb_size: NVME Target mode supported first burst size.
5434 * When the driver is configured as an NVME target, this value is
5435 * communicated to the NVME initiator in the PRLI response.  It is
5436 * used only when the lpfc_nvme_enable_fb and lpfc_nvmet_support
5437 * parameters are set and the target is sending the PRLI RSP.
5438 * Parameter supported on physical port only - no NPIV support.
5439 * Value range is [0,65536]. Default value is 0.
5440 */
5441 LPFC_ATTR_RW(nvmet_fb_size, 0, 0, 65536,
5442              "NVME Target mode first burst size in 512B increments.");
5443
5444 /*
5445  * lpfc_nvme_enable_fb: Enable NVME first burst on I and T functions.
5446  * For the Initiator (I), enabling this parameter means that an NVMET
5447  * PRLI response with FBA enabled and an FB_SIZE set to a nonzero value will be
5448  * processed by the initiator for subsequent NVME FCP IO.
5449  * Currently, this feature is not supported on the NVME target
5450  * Value range is [0,1]. Default value is 0 (disabled).
5451  */
5452 LPFC_ATTR_RW(nvme_enable_fb, 0, 0, 1,
5453              "Enable First Burst feature for NVME Initiator.");
5454
5455 /*
5456 # lpfc_max_scsicmpl_time: Use scsi command completion time to control I/O queue
5457 # depth. Default value is 0. When the value of this parameter is zero the
5458 # SCSI command completion time is not used for controlling I/O queue depth. When
5459 # the parameter is set to a non-zero value, the I/O queue depth is controlled
5460 # to limit the I/O completion time to the parameter value.
5461 # The value is set in milliseconds.
5462 */
5463 LPFC_VPORT_ATTR(max_scsicmpl_time, 0, 0, 60000,
5464         "Use command completion time to control queue depth");
5465
5466 lpfc_vport_param_show(max_scsicmpl_time);
5467 static int
5468 lpfc_max_scsicmpl_time_set(struct lpfc_vport *vport, int val)
5469 {
5470         struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
5471         struct lpfc_nodelist *ndlp, *next_ndlp;
5472
5473         if (val == vport->cfg_max_scsicmpl_time)
5474                 return 0;
5475         if ((val < 0) || (val > 60000))
5476                 return -EINVAL;
5477         vport->cfg_max_scsicmpl_time = val;
5478
5479         spin_lock_irq(shost->host_lock);
5480         list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
5481                 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
5482                         continue;
5483                 ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth;
5484         }
5485         spin_unlock_irq(shost->host_lock);
5486         return 0;
5487 }
5488 lpfc_vport_param_store(max_scsicmpl_time);
5489 static DEVICE_ATTR_RW(lpfc_max_scsicmpl_time);
5490
5491 /*
5492 # lpfc_ack0: Use ACK0, instead of ACK1 for class 2 acknowledgement. Value
5493 # range is [0,1]. Default value is 0.
5494 */
5495 LPFC_ATTR_R(ack0, 0, 0, 1, "Enable ACK0 support");
5496
5497 /*
5498 # lpfc_xri_rebalancing: enable or disable XRI rebalancing feature
5499 # range is [0,1]. Default value is 1.
5500 */
5501 LPFC_ATTR_R(xri_rebalancing, 1, 0, 1, "Enable/Disable XRI rebalancing");
5502
5503 /*
5504  * lpfc_io_sched: Determine scheduling algrithmn for issuing FCP cmds
5505  * range is [0,1]. Default value is 0.
5506  * For [0], FCP commands are issued to Work Queues based on upper layer
5507  * hardware queue index.
5508  * For [1], FCP commands are issued to a Work Queue associated with the
5509  *          current CPU.
5510  *
5511  * LPFC_FCP_SCHED_BY_HDWQ == 0
5512  * LPFC_FCP_SCHED_BY_CPU == 1
5513  *
5514  * The driver dynamically sets this to 1 (BY_CPU) if it's able to set up cpu
5515  * affinity for FCP/NVME I/Os through Work Queues associated with the current
5516  * CPU. Otherwise, the default 0 (Round Robin) scheduling of FCP/NVME I/Os
5517  * through WQs will be used.
5518  */
5519 LPFC_ATTR_RW(fcp_io_sched, LPFC_FCP_SCHED_BY_CPU,
5520              LPFC_FCP_SCHED_BY_HDWQ,
5521              LPFC_FCP_SCHED_BY_CPU,
5522              "Determine scheduling algorithm for "
5523              "issuing commands [0] - Hardware Queue, [1] - Current CPU");
5524
5525 /*
5526  * lpfc_ns_query: Determine algrithmn for NameServer queries after RSCN
5527  * range is [0,1]. Default value is 0.
5528  * For [0], GID_FT is used for NameServer queries after RSCN (default)
5529  * For [1], GID_PT is used for NameServer queries after RSCN
5530  *
5531  */
5532 LPFC_ATTR_RW(ns_query, LPFC_NS_QUERY_GID_FT,
5533              LPFC_NS_QUERY_GID_FT, LPFC_NS_QUERY_GID_PT,
5534              "Determine algorithm NameServer queries after RSCN "
5535              "[0] - GID_FT, [1] - GID_PT");
5536
5537 /*
5538 # lpfc_fcp2_no_tgt_reset: Determine bus reset behavior
5539 # range is [0,1]. Default value is 0.
5540 # For [0], bus reset issues target reset to ALL devices
5541 # For [1], bus reset issues target reset to non-FCP2 devices
5542 */
5543 LPFC_ATTR_RW(fcp2_no_tgt_reset, 0, 0, 1, "Determine bus reset behavior for "
5544              "FCP2 devices [0] - issue tgt reset, [1] - no tgt reset");
5545
5546
5547 /*
5548 # lpfc_cr_delay & lpfc_cr_count: Default values for I/O colaesing
5549 # cr_delay (msec) or cr_count outstanding commands. cr_delay can take
5550 # value [0,63]. cr_count can take value [1,255]. Default value of cr_delay
5551 # is 0. Default value of cr_count is 1. The cr_count feature is disabled if
5552 # cr_delay is set to 0.
5553 */
5554 LPFC_ATTR_RW(cr_delay, 0, 0, 63, "A count of milliseconds after which an "
5555                 "interrupt response is generated");
5556
5557 LPFC_ATTR_RW(cr_count, 1, 1, 255, "A count of I/O completions after which an "
5558                 "interrupt response is generated");
5559
5560 /*
5561 # lpfc_multi_ring_support:  Determines how many rings to spread available
5562 # cmd/rsp IOCB entries across.
5563 # Value range is [1,2]. Default value is 1.
5564 */
5565 LPFC_ATTR_R(multi_ring_support, 1, 1, 2, "Determines number of primary "
5566                 "SLI rings to spread IOCB entries across");
5567
5568 /*
5569 # lpfc_multi_ring_rctl:  If lpfc_multi_ring_support is enabled, this
5570 # identifies what rctl value to configure the additional ring for.
5571 # Value range is [1,0xff]. Default value is 4 (Unsolicated Data).
5572 */
5573 LPFC_ATTR_R(multi_ring_rctl, FC_RCTL_DD_UNSOL_DATA, 1,
5574              255, "Identifies RCTL for additional ring configuration");
5575
5576 /*
5577 # lpfc_multi_ring_type:  If lpfc_multi_ring_support is enabled, this
5578 # identifies what type value to configure the additional ring for.
5579 # Value range is [1,0xff]. Default value is 5 (LLC/SNAP).
5580 */
5581 LPFC_ATTR_R(multi_ring_type, FC_TYPE_IP, 1,
5582              255, "Identifies TYPE for additional ring configuration");
5583
5584 /*
5585 # lpfc_enable_SmartSAN: Sets up FDMI support for SmartSAN
5586 #       0  = SmartSAN functionality disabled (default)
5587 #       1  = SmartSAN functionality enabled
5588 # This parameter will override the value of lpfc_fdmi_on module parameter.
5589 # Value range is [0,1]. Default value is 0.
5590 */
5591 LPFC_ATTR_R(enable_SmartSAN, 0, 0, 1, "Enable SmartSAN functionality");
5592
5593 /*
5594 # lpfc_fdmi_on: Controls FDMI support.
5595 #       0       No FDMI support
5596 #       1       Traditional FDMI support (default)
5597 # Traditional FDMI support means the driver will assume FDMI-2 support;
5598 # however, if that fails, it will fallback to FDMI-1.
5599 # If lpfc_enable_SmartSAN is set to 1, the driver ignores lpfc_fdmi_on.
5600 # If lpfc_enable_SmartSAN is set 0, the driver uses the current value of
5601 # lpfc_fdmi_on.
5602 # Value range [0,1]. Default value is 1.
5603 */
5604 LPFC_ATTR_R(fdmi_on, 1, 0, 1, "Enable FDMI support");
5605
5606 /*
5607 # Specifies the maximum number of ELS cmds we can have outstanding (for
5608 # discovery). Value range is [1,64]. Default value = 32.
5609 */
5610 LPFC_VPORT_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands "
5611                  "during discovery");
5612
5613 /*
5614 # lpfc_max_luns: maximum allowed LUN ID. This is the highest LUN ID that
5615 #    will be scanned by the SCSI midlayer when sequential scanning is
5616 #    used; and is also the highest LUN ID allowed when the SCSI midlayer
5617 #    parses REPORT_LUN responses. The lpfc driver has no LUN count or
5618 #    LUN ID limit, but the SCSI midlayer requires this field for the uses
5619 #    above. The lpfc driver limits the default value to 255 for two reasons.
5620 #    As it bounds the sequential scan loop, scanning for thousands of luns
5621 #    on a target can take minutes of wall clock time.  Additionally,
5622 #    there are FC targets, such as JBODs, that only recognize 8-bits of
5623 #    LUN ID. When they receive a value greater than 8 bits, they chop off
5624 #    the high order bits. In other words, they see LUN IDs 0, 256, 512,
5625 #    and so on all as LUN ID 0. This causes the linux kernel, which sees
5626 #    valid responses at each of the LUN IDs, to believe there are multiple
5627 #    devices present, when in fact, there is only 1.
5628 #    A customer that is aware of their target behaviors, and the results as
5629 #    indicated above, is welcome to increase the lpfc_max_luns value.
5630 #    As mentioned, this value is not used by the lpfc driver, only the
5631 #    SCSI midlayer.
5632 # Value range is [0,65535]. Default value is 255.
5633 # NOTE: The SCSI layer might probe all allowed LUN on some old targets.
5634 */
5635 LPFC_VPORT_ULL_ATTR_R(max_luns, 255, 0, 65535, "Maximum allowed LUN ID");
5636
5637 /*
5638 # lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring.
5639 # Value range is [1,255], default value is 10.
5640 */
5641 LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
5642              "Milliseconds driver will wait between polling FCP ring");
5643
5644 /*
5645 # lpfc_task_mgmt_tmo: Maximum time to wait for task management commands
5646 # to complete in seconds. Value range is [5,180], default value is 60.
5647 */
5648 LPFC_ATTR_RW(task_mgmt_tmo, 60, 5, 180,
5649              "Maximum time to wait for task management commands to complete");
5650 /*
5651 # lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that
5652 #               support this feature
5653 #       0  = MSI disabled
5654 #       1  = MSI enabled
5655 #       2  = MSI-X enabled (default)
5656 # Value range is [0,2]. Default value is 2.
5657 */
5658 LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
5659             "MSI-X (2), if possible");
5660
5661 /*
5662  * lpfc_nvme_oas: Use the oas bit when sending NVME/NVMET IOs
5663  *
5664  *      0  = NVME OAS disabled
5665  *      1  = NVME OAS enabled
5666  *
5667  * Value range is [0,1]. Default value is 0.
5668  */
5669 LPFC_ATTR_RW(nvme_oas, 0, 0, 1,
5670              "Use OAS bit on NVME IOs");
5671
5672 /*
5673  * lpfc_nvme_embed_cmd: Use the oas bit when sending NVME/NVMET IOs
5674  *
5675  *      0  = Put NVME Command in SGL
5676  *      1  = Embed NVME Command in WQE (unless G7)
5677  *      2 =  Embed NVME Command in WQE (force)
5678  *
5679  * Value range is [0,2]. Default value is 1.
5680  */
5681 LPFC_ATTR_RW(nvme_embed_cmd, 1, 0, 2,
5682              "Embed NVME Command in WQE");
5683
5684 /*
5685  * lpfc_fcp_mq_threshold: Set the maximum number of Hardware Queues
5686  * the driver will advertise it supports to the SCSI layer.
5687  *
5688  *      0    = Set nr_hw_queues by the number of CPUs or HW queues.
5689  *      1,256 = Manually specify nr_hw_queue value to be advertised,
5690  *
5691  * Value range is [0,256]. Default value is 8.
5692  */
5693 LPFC_ATTR_R(fcp_mq_threshold, LPFC_FCP_MQ_THRESHOLD_DEF,
5694             LPFC_FCP_MQ_THRESHOLD_MIN, LPFC_FCP_MQ_THRESHOLD_MAX,
5695             "Set the number of SCSI Queues advertised");
5696
5697 /*
5698  * lpfc_hdw_queue: Set the number of Hardware Queues the driver
5699  * will advertise it supports to the NVME and  SCSI layers. This also
5700  * will map to the number of CQ/WQ pairs the driver will create.
5701  *
5702  * The NVME Layer will try to create this many, plus 1 administrative
5703  * hardware queue. The administrative queue will always map to WQ 0
5704  * A hardware IO queue maps (qidx) to a specific driver CQ/WQ.
5705  *
5706  *      0    = Configure the number of hdw queues to the number of active CPUs.
5707  *      1,256 = Manually specify how many hdw queues to use.
5708  *
5709  * Value range is [0,256]. Default value is 0.
5710  */
5711 LPFC_ATTR_R(hdw_queue,
5712             LPFC_HBA_HDWQ_DEF,
5713             LPFC_HBA_HDWQ_MIN, LPFC_HBA_HDWQ_MAX,
5714             "Set the number of I/O Hardware Queues");
5715
5716 #if IS_ENABLED(CONFIG_X86)
5717 /**
5718  * lpfc_cpumask_irq_mode_init - initalizes cpumask of phba based on
5719  *                              irq_chann_mode
5720  * @phba: Pointer to HBA context object.
5721  **/
5722 static void
5723 lpfc_cpumask_irq_mode_init(struct lpfc_hba *phba)
5724 {
5725         unsigned int cpu, first_cpu, numa_node = NUMA_NO_NODE;
5726         const struct cpumask *sibling_mask;
5727         struct cpumask *aff_mask = &phba->sli4_hba.irq_aff_mask;
5728
5729         cpumask_clear(aff_mask);
5730
5731         if (phba->irq_chann_mode == NUMA_MODE) {
5732                 /* Check if we're a NUMA architecture */
5733                 numa_node = dev_to_node(&phba->pcidev->dev);
5734                 if (numa_node == NUMA_NO_NODE) {
5735                         phba->irq_chann_mode = NORMAL_MODE;
5736                         return;
5737                 }
5738         }
5739
5740         for_each_possible_cpu(cpu) {
5741                 switch (phba->irq_chann_mode) {
5742                 case NUMA_MODE:
5743                         if (cpu_to_node(cpu) == numa_node)
5744                                 cpumask_set_cpu(cpu, aff_mask);
5745                         break;
5746                 case NHT_MODE:
5747                         sibling_mask = topology_sibling_cpumask(cpu);
5748                         first_cpu = cpumask_first(sibling_mask);
5749                         if (first_cpu < nr_cpu_ids)
5750                                 cpumask_set_cpu(first_cpu, aff_mask);
5751                         break;
5752                 default:
5753                         break;
5754                 }
5755         }
5756 }
5757 #endif
5758
5759 static void
5760 lpfc_assign_default_irq_chann(struct lpfc_hba *phba)
5761 {
5762 #if IS_ENABLED(CONFIG_X86)
5763         switch (boot_cpu_data.x86_vendor) {
5764         case X86_VENDOR_AMD:
5765                 /* If AMD architecture, then default is NUMA_MODE */
5766                 phba->irq_chann_mode = NUMA_MODE;
5767                 break;
5768         case X86_VENDOR_INTEL:
5769                 /* If Intel architecture, then default is no hyperthread mode */
5770                 phba->irq_chann_mode = NHT_MODE;
5771                 break;
5772         default:
5773                 phba->irq_chann_mode = NORMAL_MODE;
5774                 break;
5775         }
5776         lpfc_cpumask_irq_mode_init(phba);
5777 #else
5778         phba->irq_chann_mode = NORMAL_MODE;
5779 #endif
5780 }
5781
5782 /*
5783  * lpfc_irq_chann: Set the number of IRQ vectors that are available
5784  * for Hardware Queues to utilize.  This also will map to the number
5785  * of EQ / MSI-X vectors the driver will create. This should never be
5786  * more than the number of Hardware Queues
5787  *
5788  *      0               = Configure number of IRQ Channels to:
5789  *                        if AMD architecture, number of CPUs on HBA's NUMA node
5790  *                        if Intel architecture, number of physical CPUs.
5791  *                        otherwise, number of active CPUs.
5792  *      [1,256]         = Manually specify how many IRQ Channels to use.
5793  *
5794  * Value range is [0,256]. Default value is [0].
5795  */
5796 static uint lpfc_irq_chann = LPFC_IRQ_CHANN_DEF;
5797 module_param(lpfc_irq_chann, uint, 0444);
5798 MODULE_PARM_DESC(lpfc_irq_chann, "Set number of interrupt vectors to allocate");
5799
5800 /* lpfc_irq_chann_init - Set the hba irq_chann initial value
5801  * @phba: lpfc_hba pointer.
5802  * @val: contains the initial value
5803  *
5804  * Description:
5805  * Validates the initial value is within range and assigns it to the
5806  * adapter. If not in range, an error message is posted and the
5807  * default value is assigned.
5808  *
5809  * Returns:
5810  * zero if value is in range and is set
5811  * -EINVAL if value was out of range
5812  **/
5813 static int
5814 lpfc_irq_chann_init(struct lpfc_hba *phba, uint32_t val)
5815 {
5816         const struct cpumask *aff_mask;
5817
5818         if (phba->cfg_use_msi != 2) {
5819                 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5820                                 "8532 use_msi = %u ignoring cfg_irq_numa\n",
5821                                 phba->cfg_use_msi);
5822                 phba->irq_chann_mode = NORMAL_MODE;
5823                 phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF;
5824                 return 0;
5825         }
5826
5827         /* Check if default setting was passed */
5828         if (val == LPFC_IRQ_CHANN_DEF &&
5829             phba->cfg_hdw_queue == LPFC_HBA_HDWQ_DEF &&
5830             phba->sli_rev == LPFC_SLI_REV4)
5831                 lpfc_assign_default_irq_chann(phba);
5832
5833         if (phba->irq_chann_mode != NORMAL_MODE) {
5834                 aff_mask = &phba->sli4_hba.irq_aff_mask;
5835
5836                 if (cpumask_empty(aff_mask)) {
5837                         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5838                                         "8533 Could not identify CPUS for "
5839                                         "mode %d, ignoring\n",
5840                                         phba->irq_chann_mode);
5841                         phba->irq_chann_mode = NORMAL_MODE;
5842                         phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF;
5843                 } else {
5844                         phba->cfg_irq_chann = cpumask_weight(aff_mask);
5845
5846                         /* If no hyperthread mode, then set hdwq count to
5847                          * aff_mask weight as well
5848                          */
5849                         if (phba->irq_chann_mode == NHT_MODE)
5850                                 phba->cfg_hdw_queue = phba->cfg_irq_chann;
5851
5852                         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5853                                         "8543 lpfc_irq_chann set to %u "
5854                                         "(mode: %d)\n", phba->cfg_irq_chann,
5855                                         phba->irq_chann_mode);
5856                 }
5857         } else {
5858                 if (val > LPFC_IRQ_CHANN_MAX) {
5859                         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5860                                         "8545 lpfc_irq_chann attribute cannot "
5861                                         "be set to %u, allowed range is "
5862                                         "[%u,%u]\n",
5863                                         val,
5864                                         LPFC_IRQ_CHANN_MIN,
5865                                         LPFC_IRQ_CHANN_MAX);
5866                         phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF;
5867                         return -EINVAL;
5868                 }
5869                 if (phba->sli_rev == LPFC_SLI_REV4) {
5870                         phba->cfg_irq_chann = val;
5871                 } else {
5872                         phba->cfg_irq_chann = 2;
5873                         phba->cfg_hdw_queue = 1;
5874                 }
5875         }
5876
5877         return 0;
5878 }
5879
5880 /**
5881  * lpfc_irq_chann_show - Display value of irq_chann
5882  * @dev: class converted to a Scsi_host structure.
5883  * @attr: device attribute, not used.
5884  * @buf: on return contains a string with the list sizes
5885  *
5886  * Returns: size of formatted string.
5887  **/
5888 static ssize_t
5889 lpfc_irq_chann_show(struct device *dev, struct device_attribute *attr,
5890                     char *buf)
5891 {
5892         struct Scsi_Host *shost = class_to_shost(dev);
5893         struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
5894         struct lpfc_hba *phba = vport->phba;
5895
5896         return scnprintf(buf, PAGE_SIZE, "%u\n", phba->cfg_irq_chann);
5897 }
5898
5899 static DEVICE_ATTR_RO(lpfc_irq_chann);
5900
5901 /*
5902 # lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
5903 #       0  = HBA resets disabled
5904 #       1  = HBA resets enabled (default)
5905 #       2  = HBA reset via PCI bus reset enabled
5906 # Value range is [0,2]. Default value is 1.
5907 */
5908 LPFC_ATTR_RW(enable_hba_reset, 1, 0, 2, "Enable HBA resets from the driver.");
5909
5910 /*
5911 # lpfc_enable_hba_heartbeat: Disable HBA heartbeat timer..
5912 #       0  = HBA Heartbeat disabled
5913 #       1  = HBA Heartbeat enabled (default)
5914 # Value range is [0,1]. Default value is 1.
5915 */
5916 LPFC_ATTR_R(enable_hba_heartbeat, 0, 0, 1, "Enable HBA Heartbeat.");
5917
5918 /*
5919 # lpfc_EnableXLane: Enable Express Lane Feature
5920 #      0x0   Express Lane Feature disabled
5921 #      0x1   Express Lane Feature enabled
5922 # Value range is [0,1]. Default value is 0.
5923 */
5924 LPFC_ATTR_R(EnableXLane, 0, 0, 1, "Enable Express Lane Feature.");
5925
5926 /*
5927 # lpfc_XLanePriority:  Define CS_CTL priority for Express Lane Feature
5928 #       0x0 - 0x7f  = CS_CTL field in FC header (high 7 bits)
5929 # Value range is [0x0,0x7f]. Default value is 0
5930 */
5931 LPFC_ATTR_RW(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature.");
5932
5933 /*
5934 # lpfc_enable_bg: Enable BlockGuard (Emulex's Implementation of T10-DIF)
5935 #       0  = BlockGuard disabled (default)
5936 #       1  = BlockGuard enabled
5937 # Value range is [0,1]. Default value is 0.
5938 */
5939 LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");
5940
5941 /*
5942 # lpfc_prot_mask:
5943 #       - Bit mask of host protection capabilities used to register with the
5944 #         SCSI mid-layer
5945 #       - Only meaningful if BG is turned on (lpfc_enable_bg=1).
5946 #       - Allows you to ultimately specify which profiles to use
5947 #       - Default will result in registering capabilities for all profiles.
5948 #       - SHOST_DIF_TYPE1_PROTECTION    1
5949 #               HBA supports T10 DIF Type 1: HBA to Target Type 1 Protection
5950 #       - SHOST_DIX_TYPE0_PROTECTION    8
5951 #               HBA supports DIX Type 0: Host to HBA protection only
5952 #       - SHOST_DIX_TYPE1_PROTECTION    16
5953 #               HBA supports DIX Type 1: Host to HBA  Type 1 protection
5954 #
5955 */
5956 LPFC_ATTR(prot_mask,
5957         (SHOST_DIF_TYPE1_PROTECTION |
5958         SHOST_DIX_TYPE0_PROTECTION |
5959         SHOST_DIX_TYPE1_PROTECTION),
5960         0,
5961         (SHOST_DIF_TYPE1_PROTECTION |
5962         SHOST_DIX_TYPE0_PROTECTION |
5963         SHOST_DIX_TYPE1_PROTECTION),
5964         "T10-DIF host protection capabilities mask");
5965
5966 /*
5967 # lpfc_prot_guard:
5968 #       - Bit mask of protection guard types to register with the SCSI mid-layer
5969 #       - Guard types are currently either 1) T10-DIF CRC 2) IP checksum
5970 #       - Allows you to ultimately specify which profiles to use
5971 #       - Default will result in registering capabilities for all guard types
5972 #
5973 */
5974 LPFC_ATTR(prot_guard,
5975         SHOST_DIX_GUARD_IP, SHOST_DIX_GUARD_CRC, SHOST_DIX_GUARD_IP,
5976         "T10-DIF host protection guard type");
5977
5978 /*
5979  * Delay initial NPort discovery when Clean Address bit is cleared in
5980  * FLOGI/FDISC accept and FCID/Fabric name/Fabric portname is changed.
5981  * This parameter can have value 0 or 1.
5982  * When this parameter is set to 0, no delay is added to the initial
5983  * discovery.
5984  * When this parameter is set to non-zero value, initial Nport discovery is
5985  * delayed by ra_tov seconds when Clean Address bit is cleared in FLOGI/FDISC
5986  * accept and FCID/Fabric name/Fabric portname is changed.
5987  * Driver always delay Nport discovery for subsequent FLOGI/FDISC completion
5988  * when Clean Address bit is cleared in FLOGI/FDISC
5989  * accept and FCID/Fabric name/Fabric portname is changed.
5990  * Default value is 0.
5991  */
5992 LPFC_ATTR(delay_discovery, 0, 0, 1,
5993         "Delay NPort discovery when Clean Address bit is cleared.");
5994
5995 /*
5996  * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count
5997  * This value can be set to values between 64 and 4096. The default value
5998  * is 64, but may be increased to allow for larger Max I/O sizes. The scsi
5999  * and nvme layers will allow I/O sizes up to (MAX_SEG_COUNT * SEG_SIZE).
6000  * Because of the additional overhead involved in setting up T10-DIF,
6001  * this parameter will be limited to 128 if BlockGuard is enabled under SLI4
6002  * and will be limited to 512 if BlockGuard is enabled under SLI3.
6003  */
6004 static uint lpfc_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT;
6005 module_param(lpfc_sg_seg_cnt, uint, 0444);
6006 MODULE_PARM_DESC(lpfc_sg_seg_cnt, "Max Scatter Gather Segment Count");
6007
6008 /**
6009  * lpfc_sg_seg_cnt_show - Display the scatter/gather list sizes
6010  *    configured for the adapter
6011  * @dev: class converted to a Scsi_host structure.
6012  * @attr: device attribute, not used.
6013  * @buf: on return contains a string with the list sizes
6014  *
6015  * Returns: size of formatted string.
6016  **/
6017 static ssize_t
6018 lpfc_sg_seg_cnt_show(struct device *dev, struct device_attribute *attr,
6019                      char *buf)
6020 {
6021         struct Scsi_Host  *shost = class_to_shost(dev);
6022         struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
6023         struct lpfc_hba   *phba = vport->phba;
6024         int len;
6025
6026         len = scnprintf(buf, PAGE_SIZE, "SGL sz: %d  total SGEs: %d\n",
6027                        phba->cfg_sg_dma_buf_size, phba->cfg_total_seg_cnt);
6028
6029         len += scnprintf(buf + len, PAGE_SIZE, "Cfg: %d  SCSI: %d  NVME: %d\n",
6030                         phba->cfg_sg_seg_cnt, phba->cfg_scsi_seg_cnt,
6031                         phba->cfg_nvme_seg_cnt);
6032         return len;
6033 }
6034
6035 static DEVICE_ATTR_RO(lpfc_sg_seg_cnt);
6036
6037 /**
6038  * lpfc_sg_seg_cnt_init - Set the hba sg_seg_cnt initial value
6039  * @phba: lpfc_hba pointer.
6040  * @val: contains the initial value
6041  *
6042  * Description:
6043  * Validates the initial value is within range and assigns it to the
6044  * adapter. If not in range, an error message is posted and the
6045  * default value is assigned.
6046  *
6047  * Returns:
6048  * zero if value is in range and is set
6049  * -EINVAL if value was out of range
6050  **/
6051 static int
6052 lpfc_sg_seg_cnt_init(struct lpfc_hba *phba, int val)
6053 {
6054         if (val >= LPFC_MIN_SG_SEG_CNT && val <= LPFC_MAX_SG_SEG_CNT) {
6055                 phba->cfg_sg_seg_cnt = val;
6056                 return 0;
6057         }
6058         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
6059                         "0409 lpfc_sg_seg_cnt attribute cannot be set to %d, "
6060                         "allowed range is [%d, %d]\n",
6061                         val, LPFC_MIN_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT);
6062         phba->cfg_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT;
6063         return -EINVAL;
6064 }
6065
6066 /*
6067  * lpfc_enable_mds_diags: Enable MDS Diagnostics
6068  *       0  = MDS Diagnostics disabled (default)
6069  *       1  = MDS Diagnostics enabled
6070  * Value range is [0,1]. Default value is 0.
6071  */
6072 LPFC_ATTR_RW(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics");
6073
6074 /*
6075  * lpfc_ras_fwlog_buffsize: Firmware logging host buffer size
6076  *      0 = Disable firmware logging (default)
6077  *      [1-4] = Multiple of 1/4th Mb of host memory for FW logging
6078  * Value range [0..4]. Default value is 0
6079  */
6080 LPFC_ATTR(ras_fwlog_buffsize, 0, 0, 4, "Host memory for FW logging");
6081 lpfc_param_show(ras_fwlog_buffsize);
6082
6083 static ssize_t
6084 lpfc_ras_fwlog_buffsize_set(struct lpfc_hba  *phba, uint val)
6085 {
6086         int ret = 0;
6087         enum ras_state state;
6088
6089         if (!lpfc_rangecheck(val, 0, 4))
6090                 return -EINVAL;
6091
6092         if (phba->cfg_ras_fwlog_buffsize == val)
6093                 return 0;
6094
6095         if (phba->cfg_ras_fwlog_func != PCI_FUNC(phba->pcidev->devfn))
6096                 return -EINVAL;
6097
6098         spin_lock_irq(&phba->hbalock);
6099         state = phba->ras_fwlog.state;
6100         spin_unlock_irq(&phba->hbalock);
6101
6102         if (state == REG_INPROGRESS) {
6103                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "6147 RAS Logging "
6104                                 "registration is in progress\n");
6105                 return -EBUSY;
6106         }
6107
6108         /* For disable logging: stop the logs and free the DMA.
6109          * For ras_fwlog_buffsize size change we still need to free and
6110          * reallocate the DMA in lpfc_sli4_ras_fwlog_init.
6111          */
6112         phba->cfg_ras_fwlog_buffsize = val;
6113         if (state == ACTIVE) {
6114                 lpfc_ras_stop_fwlog(phba);
6115                 lpfc_sli4_ras_dma_free(phba);
6116         }
6117
6118         lpfc_sli4_ras_init(phba);
6119         if (phba->ras_fwlog.ras_enabled)
6120                 ret = lpfc_sli4_ras_fwlog_init(phba, phba->cfg_ras_fwlog_level,
6121                                                LPFC_RAS_ENABLE_LOGGING);
6122         return ret;
6123 }
6124
6125 lpfc_param_store(ras_fwlog_buffsize);
6126 static DEVICE_ATTR_RW(lpfc_ras_fwlog_buffsize);
6127
6128 /*
6129  * lpfc_ras_fwlog_level: Firmware logging verbosity level
6130  * Valid only if firmware logging is enabled
6131  * 0(Least Verbosity) 4 (most verbosity)
6132  * Value range is [0..4]. Default value is 0
6133  */
6134 LPFC_ATTR_RW(ras_fwlog_level, 0, 0, 4, "Firmware Logging Level");
6135
6136 /*
6137  * lpfc_ras_fwlog_func: Firmware logging enabled on function number
6138  * Default function which has RAS support : 0
6139  * Value Range is [0..7].
6140  * FW logging is a global action and enablement is via a specific
6141  * port.
6142  */
6143 LPFC_ATTR_RW(ras_fwlog_func, 0, 0, 7, "Firmware Logging Enabled on Function");
6144
6145 /*
6146  * lpfc_enable_bbcr: Enable BB Credit Recovery
6147  *       0  = BB Credit Recovery disabled
6148  *       1  = BB Credit Recovery enabled (default)
6149  * Value range is [0,1]. Default value is 1.
6150  */
6151 LPFC_BBCR_ATTR_RW(enable_bbcr, 1, 0, 1, "Enable BBC Recovery");
6152
6153 /* Signaling module parameters */
6154 int lpfc_fabric_cgn_frequency = 100; /* 100 ms default */
6155 module_param(lpfc_fabric_cgn_frequency, int, 0444);
6156 MODULE_PARM_DESC(lpfc_fabric_cgn_frequency, "Congestion signaling fabric freq");
6157
6158 int lpfc_acqe_cgn_frequency = 10; /* 10 sec default */
6159 module_param(lpfc_acqe_cgn_frequency, int, 0444);
6160 MODULE_PARM_DESC(lpfc_acqe_cgn_frequency, "Congestion signaling ACQE freq");
6161
6162 int lpfc_use_cgn_signal = 1; /* 0 - only use FPINs, 1 - Use signals if avail  */
6163 module_param(lpfc_use_cgn_signal, int, 0444);
6164 MODULE_PARM_DESC(lpfc_use_cgn_signal, "Use Congestion signaling if available");
6165
6166 /*
6167  * lpfc_enable_dpp: Enable DPP on G7
6168  *       0  = DPP on G7 disabled
6169  *       1  = DPP on G7 enabled (default)
6170  * Value range is [0,1]. Default value is 1.
6171  */
6172 LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push");
6173
6174 /*
6175  * lpfc_enable_mi: Enable FDMI MIB
6176  *       0  = disabled
6177  *       1  = enabled (default)
6178  * Value range is [0,1].
6179  */
6180 LPFC_ATTR_R(enable_mi, 1, 0, 1, "Enable MI");
6181
6182 /*
6183  * lpfc_max_vmid: Maximum number of VMs to be tagged. This is valid only if
6184  * either vmid_app_header or vmid_priority_tagging is enabled.
6185  *       4 - 255  = vmid support enabled for 4-255 VMs
6186  *       Value range is [4,255].
6187  */
6188 LPFC_ATTR_RW(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID,
6189              "Maximum number of VMs supported");
6190
6191 /*
6192  * lpfc_vmid_inactivity_timeout: Inactivity timeout duration in hours
6193  *       0  = Timeout is disabled
6194  * Value range is [0,24].
6195  */
6196 LPFC_ATTR_RW(vmid_inactivity_timeout, 4, 0, 24,
6197              "Inactivity timeout in hours");
6198
6199 /*
6200  * lpfc_vmid_app_header: Enable App Header VMID support
6201  *       0  = Support is disabled (default)
6202  *       1  = Support is enabled
6203  * Value range is [0,1].
6204  */
6205 LPFC_ATTR_RW(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE,
6206              LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_ENABLE,
6207              "Enable App Header VMID support");
6208
6209 /*
6210  * lpfc_vmid_priority_tagging: Enable Priority Tagging VMID support
6211  *       0  = Support is disabled (default)
6212  *       1  = Allow supported targets only
6213  *       2  = Allow all targets
6214  * Value range is [0,2].
6215  */
6216 LPFC_ATTR_RW(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE,
6217              LPFC_VMID_PRIO_TAG_DISABLE,
6218              LPFC_VMID_PRIO_TAG_ALL_TARGETS,
6219              "Enable Priority Tagging VMID support");
6220
6221 struct device_attribute *lpfc_hba_attrs[] = {
6222         &dev_attr_nvme_info,
6223         &dev_attr_scsi_stat,
6224         &dev_attr_bg_info,
6225         &dev_attr_bg_guard_err,
6226         &dev_attr_bg_apptag_err,
6227         &dev_attr_bg_reftag_err,
6228         &dev_attr_info,
6229         &dev_attr_serialnum,
6230         &dev_attr_modeldesc,
6231         &dev_attr_modelname,
6232         &dev_attr_programtype,
6233         &dev_attr_portnum,
6234         &dev_attr_fwrev,
6235         &dev_attr_hdw,
6236         &dev_attr_option_rom_version,
6237         &dev_attr_link_state,
6238         &dev_attr_num_discovered_ports,
6239         &dev_attr_menlo_mgmt_mode,
6240         &dev_attr_lpfc_drvr_version,
6241         &dev_attr_lpfc_enable_fip,
6242         &dev_attr_lpfc_temp_sensor,
6243         &dev_attr_lpfc_log_verbose,
6244         &dev_attr_lpfc_lun_queue_depth,
6245         &dev_attr_lpfc_tgt_queue_depth,
6246         &dev_attr_lpfc_hba_queue_depth,
6247         &dev_attr_lpfc_peer_port_login,
6248         &dev_attr_lpfc_nodev_tmo,
6249         &dev_attr_lpfc_devloss_tmo,
6250         &dev_attr_lpfc_enable_fc4_type,
6251         &dev_attr_lpfc_fcp_class,
6252         &dev_attr_lpfc_use_adisc,
6253         &dev_attr_lpfc_first_burst_size,
6254         &dev_attr_lpfc_ack0,
6255         &dev_attr_lpfc_xri_rebalancing,
6256         &dev_attr_lpfc_topology,
6257         &dev_attr_lpfc_scan_down,
6258         &dev_attr_lpfc_link_speed,
6259         &dev_attr_lpfc_fcp_io_sched,
6260         &dev_attr_lpfc_ns_query,
6261         &dev_attr_lpfc_fcp2_no_tgt_reset,
6262         &dev_attr_lpfc_cr_delay,
6263         &dev_attr_lpfc_cr_count,
6264         &dev_attr_lpfc_multi_ring_support,
6265         &dev_attr_lpfc_multi_ring_rctl,
6266         &dev_attr_lpfc_multi_ring_type,
6267         &dev_attr_lpfc_fdmi_on,
6268         &dev_attr_lpfc_enable_SmartSAN,
6269         &dev_attr_lpfc_max_luns,
6270         &dev_attr_lpfc_enable_npiv,
6271         &dev_attr_lpfc_fcf_failover_policy,
6272         &dev_attr_lpfc_enable_rrq,
6273         &dev_attr_lpfc_fcp_wait_abts_rsp,
6274         &dev_attr_nport_evt_cnt,
6275         &dev_attr_board_mode,
6276         &dev_attr_max_vpi,
6277         &dev_attr_used_vpi,
6278         &dev_attr_max_rpi,
6279         &dev_attr_used_rpi,
6280         &dev_attr_max_xri,
6281         &dev_attr_used_xri,
6282         &dev_attr_npiv_info,
6283         &dev_attr_issue_reset,
6284         &dev_attr_lpfc_poll,
6285         &dev_attr_lpfc_poll_tmo,
6286         &dev_attr_lpfc_task_mgmt_tmo,
6287         &dev_attr_lpfc_use_msi,
6288         &dev_attr_lpfc_nvme_oas,
6289         &dev_attr_lpfc_nvme_embed_cmd,
6290         &dev_attr_lpfc_fcp_imax,
6291         &dev_attr_lpfc_force_rscn,
6292         &dev_attr_lpfc_cq_poll_threshold,
6293         &dev_attr_lpfc_cq_max_proc_limit,
6294         &dev_attr_lpfc_fcp_cpu_map,
6295         &dev_attr_lpfc_fcp_mq_threshold,
6296         &dev_attr_lpfc_hdw_queue,
6297         &dev_attr_lpfc_irq_chann,
6298         &dev_attr_lpfc_suppress_rsp,
6299         &dev_attr_lpfc_nvmet_mrq,
6300         &dev_attr_lpfc_nvmet_mrq_post,
6301         &dev_attr_lpfc_nvme_enable_fb,
6302         &dev_attr_lpfc_nvmet_fb_size,
6303         &dev_attr_lpfc_enable_bg,
6304         &dev_attr_lpfc_soft_wwnn,
6305         &dev_attr_lpfc_soft_wwpn,
6306         &dev_attr_lpfc_soft_wwn_enable,
6307         &dev_attr_lpfc_enable_hba_reset,
6308         &dev_attr_lpfc_enable_hba_heartbeat,
6309         &dev_attr_lpfc_EnableXLane,
6310         &dev_attr_lpfc_XLanePriority,
6311         &dev_attr_lpfc_xlane_lun,
6312         &dev_attr_lpfc_xlane_tgt,
6313         &dev_attr_lpfc_xlane_vpt,
6314         &dev_attr_lpfc_xlane_lun_state,
6315         &dev_attr_lpfc_xlane_lun_status,
6316         &dev_attr_lpfc_xlane_priority,
6317         &dev_attr_lpfc_sg_seg_cnt,
6318         &dev_attr_lpfc_max_scsicmpl_time,
6319         &dev_attr_lpfc_stat_data_ctrl,
6320         &dev_attr_lpfc_aer_support,
6321         &dev_attr_lpfc_aer_state_cleanup,
6322         &dev_attr_lpfc_sriov_nr_virtfn,
6323         &dev_attr_lpfc_req_fw_upgrade,
6324         &dev_attr_lpfc_suppress_link_up,
6325         &dev_attr_iocb_hw,
6326         &dev_attr_pls,
6327         &dev_attr_pt,
6328         &dev_attr_txq_hw,
6329         &dev_attr_txcmplq_hw,
6330         &dev_attr_lpfc_sriov_hw_max_virtfn,
6331         &dev_attr_protocol,
6332         &dev_attr_lpfc_xlane_supported,
6333         &dev_attr_lpfc_enable_mds_diags,
6334         &dev_attr_lpfc_ras_fwlog_buffsize,
6335         &dev_attr_lpfc_ras_fwlog_level,
6336         &dev_attr_lpfc_ras_fwlog_func,
6337         &dev_attr_lpfc_enable_bbcr,
6338         &dev_attr_lpfc_enable_dpp,
6339         &dev_attr_lpfc_enable_mi,
6340         &dev_attr_lpfc_max_vmid,
6341         &dev_attr_lpfc_vmid_inactivity_timeout,
6342         &dev_attr_lpfc_vmid_app_header,
6343         &dev_attr_lpfc_vmid_priority_tagging,
6344         NULL,
6345 };
6346
6347 struct device_attribute *lpfc_vport_attrs[] = {
6348         &dev_attr_info,
6349         &dev_attr_link_state,
6350         &dev_attr_num_discovered_ports,
6351         &dev_attr_lpfc_drvr_version,
6352         &dev_attr_lpfc_log_verbose,
6353         &dev_attr_lpfc_lun_queue_depth,
6354         &dev_attr_lpfc_tgt_queue_depth,
6355         &dev_attr_lpfc_nodev_tmo,
6356         &dev_attr_lpfc_devloss_tmo,
6357         &dev_attr_lpfc_hba_queue_depth,
6358         &dev_attr_lpfc_peer_port_login,
6359         &dev_attr_lpfc_restrict_login,
6360         &dev_attr_lpfc_fcp_class,
6361         &dev_attr_lpfc_use_adisc,
6362         &dev_attr_lpfc_first_burst_size,
6363         &dev_attr_lpfc_max_luns,
6364         &dev_attr_nport_evt_cnt,
6365         &dev_attr_npiv_info,
6366         &dev_attr_lpfc_enable_da_id,
6367         &dev_attr_lpfc_max_scsicmpl_time,
6368         &dev_attr_lpfc_stat_data_ctrl,
6369         &dev_attr_lpfc_static_vport,
6370         NULL,
6371 };
6372
6373 /**
6374  * sysfs_ctlreg_write - Write method for writing to ctlreg
6375  * @filp: open sysfs file
6376  * @kobj: kernel kobject that contains the kernel class device.
6377  * @bin_attr: kernel attributes passed to us.
6378  * @buf: contains the data to be written to the adapter IOREG space.
6379  * @off: offset into buffer to beginning of data.
6380  * @count: bytes to transfer.
6381  *
6382  * Description:
6383  * Accessed via /sys/class/scsi_host/hostxxx/ctlreg.
6384  * Uses the adapter io control registers to send buf contents to the adapter.
6385  *
6386  * Returns:
6387  * -ERANGE off and count combo out of range
6388  * -EINVAL off, count or buff address invalid
6389  * -EPERM adapter is offline
6390  * value of count, buf contents written
6391  **/
6392 static ssize_t
6393 sysfs_ctlreg_write(struct file *filp, struct kobject *kobj,
6394                    struct bin_attribute *bin_attr,
6395                    char *buf, loff_t off, size_t count)
6396 {
6397         size_t buf_off;
6398         struct device *dev = container_of(kobj, struct device, kobj);
6399         struct Scsi_Host  *shost = class_to_shost(dev);
6400         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
6401         struct lpfc_hba   *phba = vport->phba;
6402
6403         if (phba->sli_rev >= LPFC_SLI_REV4)
6404                 return -EPERM;
6405
6406         if ((off + count) > FF_REG_AREA_SIZE)
6407                 return -ERANGE;
6408
6409         if (count <= LPFC_REG_WRITE_KEY_SIZE)
6410                 return 0;
6411
6412         if (off % 4 || count % 4 || (unsigned long)buf % 4)
6413                 return -EINVAL;
6414
6415         /* This is to protect HBA registers from accidental writes. */
6416         if (memcmp(buf, LPFC_REG_WRITE_KEY, LPFC_REG_WRITE_KEY_SIZE))
6417                 return -EINVAL;
6418
6419         if (!(vport->fc_flag & FC_OFFLINE_MODE))
6420                 return -EPERM;
6421
6422         spin_lock_irq(&phba->hbalock);
6423         for (buf_off = 0; buf_off < count - LPFC_REG_WRITE_KEY_SIZE;
6424                         buf_off += sizeof(uint32_t))
6425                 writel(*((uint32_t *)(buf + buf_off + LPFC_REG_WRITE_KEY_SIZE)),
6426                        phba->ctrl_regs_memmap_p + off + buf_off);
6427
6428         spin_unlock_irq(&phba->hbalock);
6429
6430         return count;
6431 }
6432
6433 /**
6434  * sysfs_ctlreg_read - Read method for reading from ctlreg
6435  * @filp: open sysfs file
6436  * @kobj: kernel kobject that contains the kernel class device.
6437  * @bin_attr: kernel attributes passed to us.
6438  * @buf: if successful contains the data from the adapter IOREG space.
6439  * @off: offset into buffer to beginning of data.
6440  * @count: bytes to transfer.
6441  *
6442  * Description:
6443  * Accessed via /sys/class/scsi_host/hostxxx/ctlreg.
6444  * Uses the adapter io control registers to read data into buf.
6445  *
6446  * Returns:
6447  * -ERANGE off and count combo out of range
6448  * -EINVAL off, count or buff address invalid
6449  * value of count, buf contents read
6450  **/
6451 static ssize_t
6452 sysfs_ctlreg_read(struct file *filp, struct kobject *kobj,
6453                   struct bin_attribute *bin_attr,
6454                   char *buf, loff_t off, size_t count)
6455 {
6456         size_t buf_off;
6457         uint32_t * tmp_ptr;
6458         struct device *dev = container_of(kobj, struct device, kobj);
6459         struct Scsi_Host  *shost = class_to_shost(dev);
6460         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
6461         struct lpfc_hba   *phba = vport->phba;
6462
6463         if (phba->sli_rev >= LPFC_SLI_REV4)
6464                 return -EPERM;
6465
6466         if (off > FF_REG_AREA_SIZE)
6467                 return -ERANGE;
6468
6469         if ((off + count) > FF_REG_AREA_SIZE)
6470                 count = FF_REG_AREA_SIZE - off;
6471
6472         if (count == 0) return 0;
6473
6474         if (off % 4 || count % 4 || (unsigned long)buf % 4)
6475                 return -EINVAL;
6476
6477         spin_lock_irq(&phba->hbalock);
6478
6479         for (buf_off = 0; buf_off < count; buf_off += sizeof(uint32_t)) {
6480                 tmp_ptr = (uint32_t *)(buf + buf_off);
6481                 *tmp_ptr = readl(phba->ctrl_regs_memmap_p + off + buf_off);
6482         }
6483
6484         spin_unlock_irq(&phba->hbalock);
6485
6486         return count;
6487 }
6488
6489 static struct bin_attribute sysfs_ctlreg_attr = {
6490         .attr = {
6491                 .name = "ctlreg",
6492                 .mode = S_IRUSR | S_IWUSR,
6493         },
6494         .size = 256,
6495         .read = sysfs_ctlreg_read,
6496         .write = sysfs_ctlreg_write,
6497 };
6498
6499 /**
6500  * sysfs_mbox_write - Write method for writing information via mbox
6501  * @filp: open sysfs file
6502  * @kobj: kernel kobject that contains the kernel class device.
6503  * @bin_attr: kernel attributes passed to us.
6504  * @buf: contains the data to be written to sysfs mbox.
6505  * @off: offset into buffer to beginning of data.
6506  * @count: bytes to transfer.
6507  *
6508  * Description:
6509  * Deprecated function. All mailbox access from user space is performed via the
6510  * bsg interface.
6511  *
6512  * Returns:
6513  * -EPERM operation not permitted
6514  **/
6515 static ssize_t
6516 sysfs_mbox_write(struct file *filp, struct kobject *kobj,
6517                  struct bin_attribute *bin_attr,
6518                  char *buf, loff_t off, size_t count)
6519 {
6520         return -EPERM;
6521 }
6522
6523 /**
6524  * sysfs_mbox_read - Read method for reading information via mbox
6525  * @filp: open sysfs file
6526  * @kobj: kernel kobject that contains the kernel class device.
6527  * @bin_attr: kernel attributes passed to us.
6528  * @buf: contains the data to be read from sysfs mbox.
6529  * @off: offset into buffer to beginning of data.
6530  * @count: bytes to transfer.
6531  *
6532  * Description:
6533  * Deprecated function. All mailbox access from user space is performed via the
6534  * bsg interface.
6535  *
6536  * Returns:
6537  * -EPERM operation not permitted
6538  **/
6539 static ssize_t
6540 sysfs_mbox_read(struct file *filp, struct kobject *kobj,
6541                 struct bin_attribute *bin_attr,
6542                 char *buf, loff_t off, size_t count)
6543 {
6544         return -EPERM;
6545 }
6546
6547 static struct bin_attribute sysfs_mbox_attr = {
6548         .attr = {
6549                 .name = "mbox",
6550                 .mode = S_IRUSR | S_IWUSR,
6551         },
6552         .size = MAILBOX_SYSFS_MAX,
6553         .read = sysfs_mbox_read,
6554         .write = sysfs_mbox_write,
6555 };
6556
6557 /**
6558  * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries
6559  * @vport: address of lpfc vport structure.
6560  *
6561  * Return codes:
6562  * zero on success
6563  * error return code from sysfs_create_bin_file()
6564  **/
6565 int
6566 lpfc_alloc_sysfs_attr(struct lpfc_vport *vport)
6567 {
6568         struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
6569         int error;
6570
6571         error = sysfs_create_bin_file(&shost->shost_dev.kobj,
6572                                       &sysfs_drvr_stat_data_attr);
6573
6574         /* Virtual ports do not need ctrl_reg and mbox */
6575         if (error || vport->port_type == LPFC_NPIV_PORT)
6576                 goto out;
6577
6578         error = sysfs_create_bin_file(&shost->shost_dev.kobj,
6579                                       &sysfs_ctlreg_attr);
6580         if (error)
6581                 goto out_remove_stat_attr;
6582
6583         error = sysfs_create_bin_file(&shost->shost_dev.kobj,
6584                                       &sysfs_mbox_attr);
6585         if (error)
6586                 goto out_remove_ctlreg_attr;
6587
6588         return 0;
6589 out_remove_ctlreg_attr:
6590         sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr);
6591 out_remove_stat_attr:
6592         sysfs_remove_bin_file(&shost->shost_dev.kobj,
6593                         &sysfs_drvr_stat_data_attr);
6594 out:
6595         return error;
6596 }
6597
6598 /**
6599  * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries
6600  * @vport: address of lpfc vport structure.
6601  **/
6602 void
6603 lpfc_free_sysfs_attr(struct lpfc_vport *vport)
6604 {
6605         struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
6606         sysfs_remove_bin_file(&shost->shost_dev.kobj,
6607                 &sysfs_drvr_stat_data_attr);
6608         /* Virtual ports do not need ctrl_reg and mbox */
6609         if (vport->port_type == LPFC_NPIV_PORT)
6610                 return;
6611         sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_mbox_attr);
6612         sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr);
6613 }
6614
6615 /*
6616  * Dynamic FC Host Attributes Support
6617  */
6618
6619 /**
6620  * lpfc_get_host_symbolic_name - Copy symbolic name into the scsi host
6621  * @shost: kernel scsi host pointer.
6622  **/
6623 static void
6624 lpfc_get_host_symbolic_name(struct Scsi_Host *shost)
6625 {
6626         struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
6627
6628         lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost),
6629                                       sizeof fc_host_symbolic_name(shost));
6630 }
6631
6632 /**
6633  * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id
6634  * @shost: kernel scsi host pointer.
6635  **/
6636 static void
6637 lpfc_get_host_port_id(struct Scsi_Host *shost)
6638 {
6639         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
6640
6641         /* note: fc_myDID already in cpu endianness */
6642         fc_host_port_id(shost) = vport->fc_myDID;
6643 }
6644
6645 /**
6646  * lpfc_get_host_port_type - Set the value of the scsi host port type
6647  * @shost: kernel scsi host pointer.
6648  **/
6649 static void
6650 lpfc_get_host_port_type(struct Scsi_Host *shost)
6651 {
6652         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
6653         struct lpfc_hba   *phba = vport->phba;
6654
6655         spin_lock_irq(shost->host_lock);
6656
6657         if (vport->port_type == LPFC_NPIV_PORT) {
6658                 fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
6659         } else if (lpfc_is_link_up(phba)) {
6660                 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
6661                         if (vport->fc_flag & FC_PUBLIC_LOOP)
6662                                 fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
6663                         else
6664                                 fc_host_port_type(shost) = FC_PORTTYPE_LPORT;
6665                 } else {
6666                         if (vport->fc_flag & FC_FABRIC)
6667                                 fc_host_port_type(shost) = FC_PORTTYPE_NPORT;
6668                         else
6669                                 fc_host_port_type(shost) = FC_PORTTYPE_PTP;
6670                 }
6671         } else
6672                 fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN;
6673
6674         spin_unlock_irq(shost->host_lock);
6675 }
6676
6677 /**
6678  * lpfc_get_host_port_state - Set the value of the scsi host port state
6679  * @shost: kernel scsi host pointer.
6680  **/
6681 static void
6682 lpfc_get_host_port_state(struct Scsi_Host *shost)
6683 {
6684         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
6685         struct lpfc_hba   *phba = vport->phba;
6686
6687         spin_lock_irq(shost->host_lock);
6688
6689         if (vport->fc_flag & FC_OFFLINE_MODE)
6690                 fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
6691         else {
6692                 switch (phba->link_state) {
6693                 case LPFC_LINK_UNKNOWN:
6694                 case LPFC_LINK_DOWN:
6695                         fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;
6696                         break;
6697                 case LPFC_LINK_UP:
6698                 case LPFC_CLEAR_LA:
6699                 case LPFC_HBA_READY:
6700                         /* Links up, reports port state accordingly */
6701                         if (vport->port_state < LPFC_VPORT_READY)
6702                                 fc_host_port_state(shost) =
6703                                                         FC_PORTSTATE_BYPASSED;
6704                         else
6705                                 fc_host_port_state(shost) =
6706                                                         FC_PORTSTATE_ONLINE;
6707                         break;
6708                 case LPFC_HBA_ERROR:
6709                         fc_host_port_state(shost) = FC_PORTSTATE_ERROR;
6710                         break;
6711                 default:
6712                         fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
6713                         break;
6714                 }
6715         }
6716
6717         spin_unlock_irq(shost->host_lock);
6718 }
6719
6720 /**
6721  * lpfc_get_host_speed - Set the value of the scsi host speed
6722  * @shost: kernel scsi host pointer.
6723  **/
6724 static void
6725 lpfc_get_host_speed(struct Scsi_Host *shost)
6726 {
6727         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
6728         struct lpfc_hba   *phba = vport->phba;
6729
6730         spin_lock_irq(shost->host_lock);
6731
6732         if ((lpfc_is_link_up(phba)) && (!(phba->hba_flag & HBA_FCOE_MODE))) {
6733                 switch(phba->fc_linkspeed) {
6734                 case LPFC_LINK_SPEED_1GHZ:
6735                         fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
6736                         break;
6737                 case LPFC_LINK_SPEED_2GHZ:
6738                         fc_host_speed(shost) = FC_PORTSPEED_2GBIT;
6739                         break;
6740                 case LPFC_LINK_SPEED_4GHZ:
6741                         fc_host_speed(shost) = FC_PORTSPEED_4GBIT;
6742                         break;
6743                 case LPFC_LINK_SPEED_8GHZ:
6744                         fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
6745                         break;
6746                 case LPFC_LINK_SPEED_10GHZ:
6747                         fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
6748                         break;
6749                 case LPFC_LINK_SPEED_16GHZ:
6750                         fc_host_speed(shost) = FC_PORTSPEED_16GBIT;
6751                         break;
6752                 case LPFC_LINK_SPEED_32GHZ:
6753                         fc_host_speed(shost) = FC_PORTSPEED_32GBIT;
6754                         break;
6755                 case LPFC_LINK_SPEED_64GHZ:
6756                         fc_host_speed(shost) = FC_PORTSPEED_64GBIT;
6757                         break;
6758                 case LPFC_LINK_SPEED_128GHZ:
6759                         fc_host_speed(shost) = FC_PORTSPEED_128GBIT;
6760                         break;
6761                 case LPFC_LINK_SPEED_256GHZ:
6762                         fc_host_speed(shost) = FC_PORTSPEED_256GBIT;
6763                         break;
6764                 default:
6765                         fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
6766                         break;
6767                 }
6768         } else if (lpfc_is_link_up(phba) && (phba->hba_flag & HBA_FCOE_MODE)) {
6769                 switch (phba->fc_linkspeed) {
6770                 case LPFC_ASYNC_LINK_SPEED_1GBPS:
6771                         fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
6772                         break;
6773                 case LPFC_ASYNC_LINK_SPEED_10GBPS:
6774                         fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
6775                         break;
6776                 case LPFC_ASYNC_LINK_SPEED_20GBPS:
6777                         fc_host_speed(shost) = FC_PORTSPEED_20GBIT;
6778                         break;
6779                 case LPFC_ASYNC_LINK_SPEED_25GBPS:
6780                         fc_host_speed(shost) = FC_PORTSPEED_25GBIT;
6781                         break;
6782                 case LPFC_ASYNC_LINK_SPEED_40GBPS:
6783                         fc_host_speed(shost) = FC_PORTSPEED_40GBIT;
6784                         break;
6785                 case LPFC_ASYNC_LINK_SPEED_100GBPS:
6786                         fc_host_speed(shost) = FC_PORTSPEED_100GBIT;
6787                         break;
6788                 default:
6789                         fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
6790                         break;
6791                 }
6792         } else
6793                 fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
6794
6795         spin_unlock_irq(shost->host_lock);
6796 }
6797
6798 /**
6799  * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name
6800  * @shost: kernel scsi host pointer.
6801  **/
6802 static void
6803 lpfc_get_host_fabric_name (struct Scsi_Host *shost)
6804 {
6805         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
6806         struct lpfc_hba   *phba = vport->phba;
6807         u64 node_name;
6808
6809         spin_lock_irq(shost->host_lock);
6810
6811         if ((vport->port_state > LPFC_FLOGI) &&
6812             ((vport->fc_flag & FC_FABRIC) ||
6813              ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
6814               (vport->fc_flag & FC_PUBLIC_LOOP))))
6815                 node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn);
6816         else
6817                 /* fabric is local port if there is no F/FL_Port */
6818                 node_name = 0;
6819
6820         spin_unlock_irq(shost->host_lock);
6821
6822         fc_host_fabric_name(shost) = node_name;
6823 }
6824
6825 /**
6826  * lpfc_get_stats - Return statistical information about the adapter
6827  * @shost: kernel scsi host pointer.
6828  *
6829  * Notes:
6830  * NULL on error for link down, no mbox pool, sli2 active,
6831  * management not allowed, memory allocation error, or mbox error.
6832  *
6833  * Returns:
6834  * NULL for error
6835  * address of the adapter host statistics
6836  **/
6837 static struct fc_host_statistics *
6838 lpfc_get_stats(struct Scsi_Host *shost)
6839 {
6840         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
6841         struct lpfc_hba   *phba = vport->phba;
6842         struct lpfc_sli   *psli = &phba->sli;
6843         struct fc_host_statistics *hs = &phba->link_stats;
6844         struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets;
6845         LPFC_MBOXQ_t *pmboxq;
6846         MAILBOX_t *pmb;
6847         int rc = 0;
6848
6849         /*
6850          * prevent udev from issuing mailbox commands until the port is
6851          * configured.
6852          */
6853         if (phba->link_state < LPFC_LINK_DOWN ||
6854             !phba->mbox_mem_pool ||
6855             (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
6856                 return NULL;
6857
6858         if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
6859                 return NULL;
6860
6861         pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
6862         if (!pmboxq)
6863                 return NULL;
6864         memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
6865
6866         pmb = &pmboxq->u.mb;
6867         pmb->mbxCommand = MBX_READ_STATUS;
6868         pmb->mbxOwner = OWN_HOST;
6869         pmboxq->ctx_buf = NULL;
6870         pmboxq->vport = vport;
6871
6872         if (vport->fc_flag & FC_OFFLINE_MODE) {
6873                 rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
6874                 if (rc != MBX_SUCCESS) {
6875                         mempool_free(pmboxq, phba->mbox_mem_pool);
6876                         return NULL;
6877                 }
6878         } else {
6879                 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
6880                 if (rc != MBX_SUCCESS) {
6881                         if (rc != MBX_TIMEOUT)
6882                                 mempool_free(pmboxq, phba->mbox_mem_pool);
6883                         return NULL;
6884                 }
6885         }
6886
6887         memset(hs, 0, sizeof (struct fc_host_statistics));
6888
6889         hs->tx_frames = pmb->un.varRdStatus.xmitFrameCnt;
6890         /*
6891          * The MBX_READ_STATUS returns tx_k_bytes which has to
6892          * converted to words
6893          */
6894         hs->tx_words = (uint64_t)
6895                         ((uint64_t)pmb->un.varRdStatus.xmitByteCnt
6896                         * (uint64_t)256);
6897         hs->rx_frames = pmb->un.varRdStatus.rcvFrameCnt;
6898         hs->rx_words = (uint64_t)
6899                         ((uint64_t)pmb->un.varRdStatus.rcvByteCnt
6900                          * (uint64_t)256);
6901
6902         memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
6903         pmb->mbxCommand = MBX_READ_LNK_STAT;
6904         pmb->mbxOwner = OWN_HOST;
6905         pmboxq->ctx_buf = NULL;
6906         pmboxq->vport = vport;
6907
6908         if (vport->fc_flag & FC_OFFLINE_MODE) {
6909                 rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
6910                 if (rc != MBX_SUCCESS) {
6911                         mempool_free(pmboxq, phba->mbox_mem_pool);
6912                         return NULL;
6913                 }
6914         } else {
6915                 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
6916                 if (rc != MBX_SUCCESS) {
6917                         if (rc != MBX_TIMEOUT)
6918                                 mempool_free(pmboxq, phba->mbox_mem_pool);
6919                         return NULL;
6920                 }
6921         }
6922
6923         hs->link_failure_count = pmb->un.varRdLnk.linkFailureCnt;
6924         hs->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt;
6925         hs->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt;
6926         hs->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt;
6927         hs->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord;
6928         hs->invalid_crc_count = pmb->un.varRdLnk.crcCnt;
6929         hs->error_frames = pmb->un.varRdLnk.crcCnt;
6930
6931         hs->cn_sig_warn = atomic64_read(&phba->cgn_acqe_stat.warn);
6932         hs->cn_sig_alarm = atomic64_read(&phba->cgn_acqe_stat.alarm);
6933
6934         hs->link_failure_count -= lso->link_failure_count;
6935         hs->loss_of_sync_count -= lso->loss_of_sync_count;
6936         hs->loss_of_signal_count -= lso->loss_of_signal_count;
6937         hs->prim_seq_protocol_err_count -= lso->prim_seq_protocol_err_count;
6938         hs->invalid_tx_word_count -= lso->invalid_tx_word_count;
6939         hs->invalid_crc_count -= lso->invalid_crc_count;
6940         hs->error_frames -= lso->error_frames;
6941
6942         if (phba->hba_flag & HBA_FCOE_MODE) {
6943                 hs->lip_count = -1;
6944                 hs->nos_count = (phba->link_events >> 1);
6945                 hs->nos_count -= lso->link_events;
6946         } else if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
6947                 hs->lip_count = (phba->fc_eventTag >> 1);
6948                 hs->lip_count -= lso->link_events;
6949                 hs->nos_count = -1;
6950         } else {
6951                 hs->lip_count = -1;
6952                 hs->nos_count = (phba->fc_eventTag >> 1);
6953                 hs->nos_count -= lso->link_events;
6954         }
6955
6956         hs->dumped_frames = -1;
6957
6958         hs->seconds_since_last_reset = ktime_get_seconds() - psli->stats_start;
6959
6960         mempool_free(pmboxq, phba->mbox_mem_pool);
6961
6962         return hs;
6963 }
6964
6965 /**
6966  * lpfc_reset_stats - Copy the adapter link stats information
6967  * @shost: kernel scsi host pointer.
6968  **/
6969 static void
6970 lpfc_reset_stats(struct Scsi_Host *shost)
6971 {
6972         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
6973         struct lpfc_hba   *phba = vport->phba;
6974         struct lpfc_sli   *psli = &phba->sli;
6975         struct lpfc_lnk_stat *lso = &psli->lnk_stat_offsets;
6976         LPFC_MBOXQ_t *pmboxq;
6977         MAILBOX_t *pmb;
6978         int rc = 0;
6979
6980         if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
6981                 return;
6982
6983         pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
6984         if (!pmboxq)
6985                 return;
6986         memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
6987
6988         pmb = &pmboxq->u.mb;
6989         pmb->mbxCommand = MBX_READ_STATUS;
6990         pmb->mbxOwner = OWN_HOST;
6991         pmb->un.varWords[0] = 0x1; /* reset request */
6992         pmboxq->ctx_buf = NULL;
6993         pmboxq->vport = vport;
6994
6995         if ((vport->fc_flag & FC_OFFLINE_MODE) ||
6996                 (!(psli->sli_flag & LPFC_SLI_ACTIVE))) {
6997                 rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
6998                 if (rc != MBX_SUCCESS) {
6999                         mempool_free(pmboxq, phba->mbox_mem_pool);
7000                         return;
7001                 }
7002         } else {
7003                 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
7004                 if (rc != MBX_SUCCESS) {
7005                         if (rc != MBX_TIMEOUT)
7006                                 mempool_free(pmboxq, phba->mbox_mem_pool);
7007                         return;
7008                 }
7009         }
7010
7011         memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
7012         pmb->mbxCommand = MBX_READ_LNK_STAT;
7013         pmb->mbxOwner = OWN_HOST;
7014         pmboxq->ctx_buf = NULL;
7015         pmboxq->vport = vport;
7016
7017         if ((vport->fc_flag & FC_OFFLINE_MODE) ||
7018             (!(psli->sli_flag & LPFC_SLI_ACTIVE))) {
7019                 rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
7020                 if (rc != MBX_SUCCESS) {
7021                         mempool_free(pmboxq, phba->mbox_mem_pool);
7022                         return;
7023                 }
7024         } else {
7025                 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
7026                 if (rc != MBX_SUCCESS) {
7027                         if (rc != MBX_TIMEOUT)
7028                                 mempool_free(pmboxq, phba->mbox_mem_pool);
7029                         return;
7030                 }
7031         }
7032
7033         lso->link_failure_count = pmb->un.varRdLnk.linkFailureCnt;
7034         lso->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt;
7035         lso->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt;
7036         lso->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt;
7037         lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord;
7038         lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt;
7039         lso->error_frames = pmb->un.varRdLnk.crcCnt;
7040         if (phba->hba_flag & HBA_FCOE_MODE)
7041                 lso->link_events = (phba->link_events >> 1);
7042         else
7043                 lso->link_events = (phba->fc_eventTag >> 1);
7044
7045         atomic64_set(&phba->cgn_acqe_stat.warn, 0);
7046         atomic64_set(&phba->cgn_acqe_stat.alarm, 0);
7047
7048         memset(&shost_to_fc_host(shost)->fpin_stats, 0,
7049                sizeof(shost_to_fc_host(shost)->fpin_stats));
7050
7051         psli->stats_start = ktime_get_seconds();
7052
7053         mempool_free(pmboxq, phba->mbox_mem_pool);
7054
7055         return;
7056 }
7057
7058 /*
7059  * The LPFC driver treats linkdown handling as target loss events so there
7060  * are no sysfs handlers for link_down_tmo.
7061  */
7062
7063 /**
7064  * lpfc_get_node_by_target - Return the nodelist for a target
7065  * @starget: kernel scsi target pointer.
7066  *
7067  * Returns:
7068  * address of the node list if found
7069  * NULL target not found
7070  **/
7071 static struct lpfc_nodelist *
7072 lpfc_get_node_by_target(struct scsi_target *starget)
7073 {
7074         struct Scsi_Host  *shost = dev_to_shost(starget->dev.parent);
7075         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
7076         struct lpfc_nodelist *ndlp;
7077
7078         spin_lock_irq(shost->host_lock);
7079         /* Search for this, mapped, target ID */
7080         list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
7081                 if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
7082                     starget->id == ndlp->nlp_sid) {
7083                         spin_unlock_irq(shost->host_lock);
7084                         return ndlp;
7085                 }
7086         }
7087         spin_unlock_irq(shost->host_lock);
7088         return NULL;
7089 }
7090
7091 /**
7092  * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1
7093  * @starget: kernel scsi target pointer.
7094  **/
7095 static void
7096 lpfc_get_starget_port_id(struct scsi_target *starget)
7097 {
7098         struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget);
7099
7100         fc_starget_port_id(starget) = ndlp ? ndlp->nlp_DID : -1;
7101 }
7102
7103 /**
7104  * lpfc_get_starget_node_name - Set the target node name
7105  * @starget: kernel scsi target pointer.
7106  *
7107  * Description: Set the target node name to the ndlp node name wwn or zero.
7108  **/
7109 static void
7110 lpfc_get_starget_node_name(struct scsi_target *starget)
7111 {
7112         struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget);
7113
7114         fc_starget_node_name(starget) =
7115                 ndlp ? wwn_to_u64(ndlp->nlp_nodename.u.wwn) : 0;
7116 }
7117
7118 /**
7119  * lpfc_get_starget_port_name - Set the target port name
7120  * @starget: kernel scsi target pointer.
7121  *
7122  * Description:  set the target port name to the ndlp port name wwn or zero.
7123  **/
7124 static void
7125 lpfc_get_starget_port_name(struct scsi_target *starget)
7126 {
7127         struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget);
7128
7129         fc_starget_port_name(starget) =
7130                 ndlp ? wwn_to_u64(ndlp->nlp_portname.u.wwn) : 0;
7131 }
7132
7133 /**
7134  * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo
7135  * @rport: fc rport address.
7136  * @timeout: new value for dev loss tmo.
7137  *
7138  * Description:
7139  * If timeout is non zero set the dev_loss_tmo to timeout, else set
7140  * dev_loss_tmo to one.
7141  **/
7142 static void
7143 lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
7144 {
7145         struct lpfc_rport_data *rdata = rport->dd_data;
7146         struct lpfc_nodelist *ndlp = rdata->pnode;
7147 #if (IS_ENABLED(CONFIG_NVME_FC))
7148         struct lpfc_nvme_rport *nrport = NULL;
7149 #endif
7150
7151         if (timeout)
7152                 rport->dev_loss_tmo = timeout;
7153         else
7154                 rport->dev_loss_tmo = 1;
7155
7156         if (!ndlp) {
7157                 dev_info(&rport->dev, "Cannot find remote node to "
7158                                       "set rport dev loss tmo, port_id x%x\n",
7159                                       rport->port_id);
7160                 return;
7161         }
7162
7163 #if (IS_ENABLED(CONFIG_NVME_FC))
7164         nrport = lpfc_ndlp_get_nrport(ndlp);
7165
7166         if (nrport && nrport->remoteport)
7167                 nvme_fc_set_remoteport_devloss(nrport->remoteport,
7168                                                rport->dev_loss_tmo);
7169 #endif
7170 }
7171
7172 /*
7173  * lpfc_rport_show_function - Return rport target information
7174  *
7175  * Description:
7176  * Macro that uses field to generate a function with the name lpfc_show_rport_
7177  *
7178  * lpfc_show_rport_##field: returns the bytes formatted in buf
7179  * @cdev: class converted to an fc_rport.
7180  * @buf: on return contains the target_field or zero.
7181  *
7182  * Returns: size of formatted string.
7183  **/
7184 #define lpfc_rport_show_function(field, format_string, sz, cast)        \
7185 static ssize_t                                                          \
7186 lpfc_show_rport_##field (struct device *dev,                            \
7187                          struct device_attribute *attr,                 \
7188                          char *buf)                                     \
7189 {                                                                       \
7190         struct fc_rport *rport = transport_class_to_rport(dev);         \
7191         struct lpfc_rport_data *rdata = rport->hostdata;                \
7192         return scnprintf(buf, sz, format_string,                        \
7193                 (rdata->target) ? cast rdata->target->field : 0);       \
7194 }
7195
7196 #define lpfc_rport_rd_attr(field, format_string, sz)                    \
7197         lpfc_rport_show_function(field, format_string, sz, )            \
7198 static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL)
7199
7200 /**
7201  * lpfc_set_vport_symbolic_name - Set the vport's symbolic name
7202  * @fc_vport: The fc_vport who's symbolic name has been changed.
7203  *
7204  * Description:
7205  * This function is called by the transport after the @fc_vport's symbolic name
7206  * has been changed. This function re-registers the symbolic name with the
7207  * switch to propagate the change into the fabric if the vport is active.
7208  **/
7209 static void
7210 lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
7211 {
7212         struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
7213
7214         if (vport->port_state == LPFC_VPORT_READY)
7215                 lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0);
7216 }
7217
7218 /**
7219  * lpfc_hba_log_verbose_init - Set hba's log verbose level
7220  * @phba: Pointer to lpfc_hba struct.
7221  * @verbose: Verbose level to set.
7222  *
7223  * This function is called by the lpfc_get_cfgparam() routine to set the
7224  * module lpfc_log_verbose into the @phba cfg_log_verbose for use with
7225  * log message according to the module's lpfc_log_verbose parameter setting
7226  * before hba port or vport created.
7227  **/
7228 static void
7229 lpfc_hba_log_verbose_init(struct lpfc_hba *phba, uint32_t verbose)
7230 {
7231         phba->cfg_log_verbose = verbose;
7232 }
7233
7234 struct fc_function_template lpfc_transport_functions = {
7235         /* fixed attributes the driver supports */
7236         .show_host_node_name = 1,
7237         .show_host_port_name = 1,
7238         .show_host_supported_classes = 1,
7239         .show_host_supported_fc4s = 1,
7240         .show_host_supported_speeds = 1,
7241         .show_host_maxframe_size = 1,
7242
7243         .get_host_symbolic_name = lpfc_get_host_symbolic_name,
7244         .show_host_symbolic_name = 1,
7245
7246         /* dynamic attributes the driver supports */
7247         .get_host_port_id = lpfc_get_host_port_id,
7248         .show_host_port_id = 1,
7249
7250         .get_host_port_type = lpfc_get_host_port_type,
7251         .show_host_port_type = 1,
7252
7253         .get_host_port_state = lpfc_get_host_port_state,
7254         .show_host_port_state = 1,
7255
7256         /* active_fc4s is shown but doesn't change (thus no get function) */
7257         .show_host_active_fc4s = 1,
7258
7259         .get_host_speed = lpfc_get_host_speed,
7260         .show_host_speed = 1,
7261
7262         .get_host_fabric_name = lpfc_get_host_fabric_name,
7263         .show_host_fabric_name = 1,
7264
7265         /*
7266          * The LPFC driver treats linkdown handling as target loss events
7267          * so there are no sysfs handlers for link_down_tmo.
7268          */
7269
7270         .get_fc_host_stats = lpfc_get_stats,
7271         .reset_fc_host_stats = lpfc_reset_stats,
7272
7273         .dd_fcrport_size = sizeof(struct lpfc_rport_data),
7274         .show_rport_maxframe_size = 1,
7275         .show_rport_supported_classes = 1,
7276
7277         .set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo,
7278         .show_rport_dev_loss_tmo = 1,
7279
7280         .get_starget_port_id  = lpfc_get_starget_port_id,
7281         .show_starget_port_id = 1,
7282
7283         .get_starget_node_name = lpfc_get_starget_node_name,
7284         .show_starget_node_name = 1,
7285
7286         .get_starget_port_name = lpfc_get_starget_port_name,
7287         .show_starget_port_name = 1,
7288
7289         .issue_fc_host_lip = lpfc_issue_lip,
7290         .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk,
7291         .terminate_rport_io = lpfc_terminate_rport_io,
7292
7293         .dd_fcvport_size = sizeof(struct lpfc_vport *),
7294
7295         .vport_disable = lpfc_vport_disable,
7296
7297         .set_vport_symbolic_name = lpfc_set_vport_symbolic_name,
7298
7299         .bsg_request = lpfc_bsg_request,
7300         .bsg_timeout = lpfc_bsg_timeout,
7301 };
7302
7303 struct fc_function_template lpfc_vport_transport_functions = {
7304         /* fixed attributes the driver supports */
7305         .show_host_node_name = 1,
7306         .show_host_port_name = 1,
7307         .show_host_supported_classes = 1,
7308         .show_host_supported_fc4s = 1,
7309         .show_host_supported_speeds = 1,
7310         .show_host_maxframe_size = 1,
7311
7312         .get_host_symbolic_name = lpfc_get_host_symbolic_name,
7313         .show_host_symbolic_name = 1,
7314
7315         /* dynamic attributes the driver supports */
7316         .get_host_port_id = lpfc_get_host_port_id,
7317         .show_host_port_id = 1,
7318
7319         .get_host_port_type = lpfc_get_host_port_type,
7320         .show_host_port_type = 1,
7321
7322         .get_host_port_state = lpfc_get_host_port_state,
7323         .show_host_port_state = 1,
7324
7325         /* active_fc4s is shown but doesn't change (thus no get function) */
7326         .show_host_active_fc4s = 1,
7327
7328         .get_host_speed = lpfc_get_host_speed,
7329         .show_host_speed = 1,
7330
7331         .get_host_fabric_name = lpfc_get_host_fabric_name,
7332         .show_host_fabric_name = 1,
7333
7334         /*
7335          * The LPFC driver treats linkdown handling as target loss events
7336          * so there are no sysfs handlers for link_down_tmo.
7337          */
7338
7339         .get_fc_host_stats = lpfc_get_stats,
7340         .reset_fc_host_stats = lpfc_reset_stats,
7341
7342         .dd_fcrport_size = sizeof(struct lpfc_rport_data),
7343         .show_rport_maxframe_size = 1,
7344         .show_rport_supported_classes = 1,
7345
7346         .set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo,
7347         .show_rport_dev_loss_tmo = 1,
7348
7349         .get_starget_port_id  = lpfc_get_starget_port_id,
7350         .show_starget_port_id = 1,
7351
7352         .get_starget_node_name = lpfc_get_starget_node_name,
7353         .show_starget_node_name = 1,
7354
7355         .get_starget_port_name = lpfc_get_starget_port_name,
7356         .show_starget_port_name = 1,
7357
7358         .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk,
7359         .terminate_rport_io = lpfc_terminate_rport_io,
7360
7361         .vport_disable = lpfc_vport_disable,
7362
7363         .set_vport_symbolic_name = lpfc_set_vport_symbolic_name,
7364 };
7365
7366 /**
7367  * lpfc_get_hba_function_mode - Used to determine the HBA function in FCoE
7368  * Mode
7369  * @phba: lpfc_hba pointer.
7370  **/
7371 static void
7372 lpfc_get_hba_function_mode(struct lpfc_hba *phba)
7373 {
7374         /* If the adapter supports FCoE mode */
7375         switch (phba->pcidev->device) {
7376         case PCI_DEVICE_ID_SKYHAWK:
7377         case PCI_DEVICE_ID_SKYHAWK_VF:
7378         case PCI_DEVICE_ID_LANCER_FCOE:
7379         case PCI_DEVICE_ID_LANCER_FCOE_VF:
7380         case PCI_DEVICE_ID_ZEPHYR_DCSP:
7381         case PCI_DEVICE_ID_HORNET:
7382         case PCI_DEVICE_ID_TIGERSHARK:
7383         case PCI_DEVICE_ID_TOMCAT:
7384                 phba->hba_flag |= HBA_FCOE_MODE;
7385                 break;
7386         default:
7387         /* for others, clear the flag */
7388                 phba->hba_flag &= ~HBA_FCOE_MODE;
7389         }
7390 }
7391
7392 /**
7393  * lpfc_get_cfgparam - Used during probe_one to init the adapter structure
7394  * @phba: lpfc_hba pointer.
7395  **/
7396 void
7397 lpfc_get_cfgparam(struct lpfc_hba *phba)
7398 {
7399         lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
7400         lpfc_fcp_io_sched_init(phba, lpfc_fcp_io_sched);
7401         lpfc_ns_query_init(phba, lpfc_ns_query);
7402         lpfc_fcp2_no_tgt_reset_init(phba, lpfc_fcp2_no_tgt_reset);
7403         lpfc_cr_delay_init(phba, lpfc_cr_delay);
7404         lpfc_cr_count_init(phba, lpfc_cr_count);
7405         lpfc_multi_ring_support_init(phba, lpfc_multi_ring_support);
7406         lpfc_multi_ring_rctl_init(phba, lpfc_multi_ring_rctl);
7407         lpfc_multi_ring_type_init(phba, lpfc_multi_ring_type);
7408         lpfc_ack0_init(phba, lpfc_ack0);
7409         lpfc_xri_rebalancing_init(phba, lpfc_xri_rebalancing);
7410         lpfc_topology_init(phba, lpfc_topology);
7411         lpfc_link_speed_init(phba, lpfc_link_speed);
7412         lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
7413         lpfc_task_mgmt_tmo_init(phba, lpfc_task_mgmt_tmo);
7414         lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
7415         lpfc_fcf_failover_policy_init(phba, lpfc_fcf_failover_policy);
7416         lpfc_enable_rrq_init(phba, lpfc_enable_rrq);
7417         lpfc_fcp_wait_abts_rsp_init(phba, lpfc_fcp_wait_abts_rsp);
7418         lpfc_fdmi_on_init(phba, lpfc_fdmi_on);
7419         lpfc_enable_SmartSAN_init(phba, lpfc_enable_SmartSAN);
7420         lpfc_use_msi_init(phba, lpfc_use_msi);
7421         lpfc_nvme_oas_init(phba, lpfc_nvme_oas);
7422         lpfc_nvme_embed_cmd_init(phba, lpfc_nvme_embed_cmd);
7423         lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
7424         lpfc_force_rscn_init(phba, lpfc_force_rscn);
7425         lpfc_cq_poll_threshold_init(phba, lpfc_cq_poll_threshold);
7426         lpfc_cq_max_proc_limit_init(phba, lpfc_cq_max_proc_limit);
7427         lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map);
7428         lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
7429         lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
7430
7431         lpfc_EnableXLane_init(phba, lpfc_EnableXLane);
7432         /* VMID Inits */
7433         lpfc_max_vmid_init(phba, lpfc_max_vmid);
7434         lpfc_vmid_inactivity_timeout_init(phba, lpfc_vmid_inactivity_timeout);
7435         lpfc_vmid_app_header_init(phba, lpfc_vmid_app_header);
7436         lpfc_vmid_priority_tagging_init(phba, lpfc_vmid_priority_tagging);
7437         if (phba->sli_rev != LPFC_SLI_REV4)
7438                 phba->cfg_EnableXLane = 0;
7439         lpfc_XLanePriority_init(phba, lpfc_XLanePriority);
7440
7441         memset(phba->cfg_oas_tgt_wwpn, 0, (8 * sizeof(uint8_t)));
7442         memset(phba->cfg_oas_vpt_wwpn, 0, (8 * sizeof(uint8_t)));
7443         phba->cfg_oas_lun_state = 0;
7444         phba->cfg_oas_lun_status = 0;
7445         phba->cfg_oas_flags = 0;
7446         phba->cfg_oas_priority = 0;
7447         lpfc_enable_bg_init(phba, lpfc_enable_bg);
7448         lpfc_prot_mask_init(phba, lpfc_prot_mask);
7449         lpfc_prot_guard_init(phba, lpfc_prot_guard);
7450         if (phba->sli_rev == LPFC_SLI_REV4)
7451                 phba->cfg_poll = 0;
7452         else
7453                 phba->cfg_poll = lpfc_poll;
7454
7455         /* Get the function mode */
7456         lpfc_get_hba_function_mode(phba);
7457
7458         /* BlockGuard allowed for FC only. */
7459         if (phba->cfg_enable_bg && phba->hba_flag & HBA_FCOE_MODE) {
7460                 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
7461                                 "0581 BlockGuard feature not supported\n");
7462                 /* If set, clear the BlockGuard support param */
7463                 phba->cfg_enable_bg = 0;
7464         } else if (phba->cfg_enable_bg) {
7465                 phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
7466         }
7467
7468         lpfc_suppress_rsp_init(phba, lpfc_suppress_rsp);
7469
7470         lpfc_enable_fc4_type_init(phba, lpfc_enable_fc4_type);
7471         lpfc_nvmet_mrq_init(phba, lpfc_nvmet_mrq);
7472         lpfc_nvmet_mrq_post_init(phba, lpfc_nvmet_mrq_post);
7473
7474         /* Initialize first burst. Target vs Initiator are different. */
7475         lpfc_nvme_enable_fb_init(phba, lpfc_nvme_enable_fb);
7476         lpfc_nvmet_fb_size_init(phba, lpfc_nvmet_fb_size);
7477         lpfc_fcp_mq_threshold_init(phba, lpfc_fcp_mq_threshold);
7478         lpfc_hdw_queue_init(phba, lpfc_hdw_queue);
7479         lpfc_irq_chann_init(phba, lpfc_irq_chann);
7480         lpfc_enable_bbcr_init(phba, lpfc_enable_bbcr);
7481         lpfc_enable_dpp_init(phba, lpfc_enable_dpp);
7482         lpfc_enable_mi_init(phba, lpfc_enable_mi);
7483
7484         phba->cmf_active_mode = LPFC_CFG_OFF;
7485         if (lpfc_fabric_cgn_frequency > EDC_CG_SIGFREQ_CNT_MAX ||
7486            lpfc_fabric_cgn_frequency < EDC_CG_SIGFREQ_CNT_MIN)
7487                 lpfc_fabric_cgn_frequency = 100; /* 100 ms default */
7488
7489         if (phba->sli_rev != LPFC_SLI_REV4) {
7490                 /* NVME only supported on SLI4 */
7491                 phba->nvmet_support = 0;
7492                 phba->cfg_nvmet_mrq = 0;
7493                 phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
7494                 phba->cfg_enable_bbcr = 0;
7495                 phba->cfg_xri_rebalancing = 0;
7496         } else {
7497                 /* We MUST have FCP support */
7498                 if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
7499                         phba->cfg_enable_fc4_type |= LPFC_ENABLE_FCP;
7500         }
7501
7502         phba->cfg_auto_imax = (phba->cfg_fcp_imax) ? 0 : 1;
7503
7504         phba->cfg_enable_pbde = 0;
7505
7506         /* A value of 0 means use the number of CPUs found in the system */
7507         if (phba->cfg_hdw_queue == 0)
7508                 phba->cfg_hdw_queue = phba->sli4_hba.num_present_cpu;
7509         if (phba->cfg_irq_chann == 0)
7510                 phba->cfg_irq_chann = phba->sli4_hba.num_present_cpu;
7511         if (phba->cfg_irq_chann > phba->cfg_hdw_queue &&
7512             phba->sli_rev == LPFC_SLI_REV4)
7513                 phba->cfg_irq_chann = phba->cfg_hdw_queue;
7514
7515         phba->cfg_soft_wwnn = 0L;
7516         phba->cfg_soft_wwpn = 0L;
7517         lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
7518         lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
7519         lpfc_aer_support_init(phba, lpfc_aer_support);
7520         lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn);
7521         lpfc_request_firmware_upgrade_init(phba, lpfc_req_fw_upgrade);
7522         lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);
7523         lpfc_delay_discovery_init(phba, lpfc_delay_discovery);
7524         lpfc_sli_mode_init(phba, lpfc_sli_mode);
7525         lpfc_enable_mds_diags_init(phba, lpfc_enable_mds_diags);
7526         lpfc_ras_fwlog_buffsize_init(phba, lpfc_ras_fwlog_buffsize);
7527         lpfc_ras_fwlog_level_init(phba, lpfc_ras_fwlog_level);
7528         lpfc_ras_fwlog_func_init(phba, lpfc_ras_fwlog_func);
7529
7530         return;
7531 }
7532
7533 /**
7534  * lpfc_nvme_mod_param_dep - Adjust module parameter value based on
7535  * dependencies between protocols and roles.
7536  * @phba: lpfc_hba pointer.
7537  **/
7538 void
7539 lpfc_nvme_mod_param_dep(struct lpfc_hba *phba)
7540 {
7541         int  logit = 0;
7542
7543         if (phba->cfg_hdw_queue > phba->sli4_hba.num_present_cpu) {
7544                 phba->cfg_hdw_queue = phba->sli4_hba.num_present_cpu;
7545                 logit = 1;
7546         }
7547         if (phba->cfg_irq_chann > phba->sli4_hba.num_present_cpu) {
7548                 phba->cfg_irq_chann = phba->sli4_hba.num_present_cpu;
7549                 logit = 1;
7550         }
7551         if (phba->cfg_irq_chann > phba->cfg_hdw_queue) {
7552                 phba->cfg_irq_chann = phba->cfg_hdw_queue;
7553                 logit = 1;
7554         }
7555         if (logit)
7556                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
7557                                 "2006 Reducing Queues - CPU limitation: "
7558                                 "IRQ %d HDWQ %d\n",
7559                                 phba->cfg_irq_chann,
7560                                 phba->cfg_hdw_queue);
7561
7562         if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME &&
7563             phba->nvmet_support) {
7564                 phba->cfg_enable_fc4_type &= ~LPFC_ENABLE_FCP;
7565
7566                 lpfc_printf_log(phba, KERN_INFO, LOG_NVME_DISC,
7567                                 "6013 %s x%x fb_size x%x, fb_max x%x\n",
7568                                 "NVME Target PRLI ACC enable_fb ",
7569                                 phba->cfg_nvme_enable_fb,
7570                                 phba->cfg_nvmet_fb_size,
7571                                 LPFC_NVMET_FB_SZ_MAX);
7572
7573                 if (phba->cfg_nvme_enable_fb == 0)
7574                         phba->cfg_nvmet_fb_size = 0;
7575                 else {
7576                         if (phba->cfg_nvmet_fb_size > LPFC_NVMET_FB_SZ_MAX)
7577                                 phba->cfg_nvmet_fb_size = LPFC_NVMET_FB_SZ_MAX;
7578                 }
7579
7580                 if (!phba->cfg_nvmet_mrq)
7581                         phba->cfg_nvmet_mrq = phba->cfg_hdw_queue;
7582
7583                 /* Adjust lpfc_nvmet_mrq to avoid running out of WQE slots */
7584                 if (phba->cfg_nvmet_mrq > phba->cfg_hdw_queue) {
7585                         phba->cfg_nvmet_mrq = phba->cfg_hdw_queue;
7586                         lpfc_printf_log(phba, KERN_ERR, LOG_NVME_DISC,
7587                                         "6018 Adjust lpfc_nvmet_mrq to %d\n",
7588                                         phba->cfg_nvmet_mrq);
7589                 }
7590                 if (phba->cfg_nvmet_mrq > LPFC_NVMET_MRQ_MAX)
7591                         phba->cfg_nvmet_mrq = LPFC_NVMET_MRQ_MAX;
7592
7593         } else {
7594                 /* Not NVME Target mode.  Turn off Target parameters. */
7595                 phba->nvmet_support = 0;
7596                 phba->cfg_nvmet_mrq = 0;
7597                 phba->cfg_nvmet_fb_size = 0;
7598         }
7599 }
7600
7601 /**
7602  * lpfc_get_vport_cfgparam - Used during port create, init the vport structure
7603  * @vport: lpfc_vport pointer.
7604  **/
7605 void
7606 lpfc_get_vport_cfgparam(struct lpfc_vport *vport)
7607 {
7608         lpfc_log_verbose_init(vport, lpfc_log_verbose);
7609         lpfc_lun_queue_depth_init(vport, lpfc_lun_queue_depth);
7610         lpfc_tgt_queue_depth_init(vport, lpfc_tgt_queue_depth);
7611         lpfc_devloss_tmo_init(vport, lpfc_devloss_tmo);
7612         lpfc_nodev_tmo_init(vport, lpfc_nodev_tmo);
7613         lpfc_peer_port_login_init(vport, lpfc_peer_port_login);
7614         lpfc_restrict_login_init(vport, lpfc_restrict_login);
7615         lpfc_fcp_class_init(vport, lpfc_fcp_class);
7616         lpfc_use_adisc_init(vport, lpfc_use_adisc);
7617         lpfc_first_burst_size_init(vport, lpfc_first_burst_size);
7618         lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time);
7619         lpfc_discovery_threads_init(vport, lpfc_discovery_threads);
7620         lpfc_max_luns_init(vport, lpfc_max_luns);
7621         lpfc_scan_down_init(vport, lpfc_scan_down);
7622         lpfc_enable_da_id_init(vport, lpfc_enable_da_id);
7623         return;
7624 }