1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
5 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. *
6 * Copyright (C) 2004-2016 Emulex. All rights reserved. *
7 * EMULEX and SLI are trademarks of Emulex. *
9 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
11 * This program is free software; you can redistribute it and/or *
12 * modify it under the terms of version 2 of the GNU General *
13 * Public License as published by the Free Software Foundation. *
14 * This program is distributed in the hope that it will be useful. *
15 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
16 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
17 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
18 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
19 * TO BE LEGALLY INVALID. See the GNU General Public License for *
20 * more details, a copy of which can be found in the file COPYING *
21 * included with this package. *
22 *******************************************************************/
24 #include <scsi/scsi_host.h>
25 #include <linux/ktime.h>
26 #include <linux/workqueue.h>
28 #if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_SCSI_LPFC_DEBUG_FS)
29 #define CONFIG_SCSI_LPFC_DEBUG_FS
32 struct lpfc_sli2_slim;
34 #define ELX_MODEL_NAME_SIZE 80
36 #define LPFC_PCI_DEV_LP 0x1
37 #define LPFC_PCI_DEV_OC 0x2
39 #define LPFC_SLI_REV2 2
40 #define LPFC_SLI_REV3 3
41 #define LPFC_SLI_REV4 4
43 #define LPFC_MAX_TARGET 4096 /* max number of targets supported */
44 #define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els
46 #define LPFC_MAX_NS_RETRY 3 /* Number of retry attempts to contact
47 the NameServer before giving up. */
48 #define LPFC_CMD_PER_LUN 3 /* max outstanding cmds per lun */
49 #define LPFC_DEFAULT_SG_SEG_CNT 64 /* sg element count per scsi cmnd */
50 #define LPFC_DEFAULT_MENLO_SG_SEG_CNT 128 /* sg element count per scsi
51 cmnd for menlo needs nearly twice as for firmware
52 downloads using bsg */
54 #define LPFC_MIN_SG_SLI4_BUF_SZ 0x800 /* based on LPFC_DEFAULT_SG_SEG_CNT */
55 #define LPFC_MAX_BG_SLI4_SEG_CNT_DIF 128 /* sg element count for BlockGuard */
56 #define LPFC_MAX_SG_SEG_CNT_DIF 512 /* sg element count per scsi cmnd */
57 #define LPFC_MAX_SG_SEG_CNT 4096 /* sg element count per scsi cmnd */
58 #define LPFC_MIN_SG_SEG_CNT 32 /* sg element count per scsi cmnd */
59 #define LPFC_MAX_SGL_SEG_CNT 512 /* SGL element count per scsi cmnd */
60 #define LPFC_MAX_BPL_SEG_CNT 4096 /* BPL element count per scsi cmnd */
61 #define LPFC_MAX_NVME_SEG_CNT 256 /* max SGL element cnt per NVME cmnd */
63 #define LPFC_MAX_SGE_SIZE 0x80000000 /* Maximum data allowed in a SGE */
64 #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */
65 #define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */
66 #define LPFC_VNAME_LEN 100 /* vport symbolic name length */
67 #define LPFC_TGTQ_RAMPUP_PCENT 5 /* Target queue rampup in percentage */
68 #define LPFC_MIN_TGT_QDEPTH 10
69 #define LPFC_MAX_TGT_QDEPTH 0xFFFF
71 #define LPFC_MAX_BUCKET_COUNT 20 /* Maximum no. of buckets for stat data
74 * Following time intervals are used of adjusting SCSI device
75 * queue depths when there are driver resource error or Firmware
79 #define QUEUE_RAMP_DOWN_INTERVAL (msecs_to_jiffies(1000 * 1))
81 /* Number of exchanges reserved for discovery to complete */
82 #define LPFC_DISC_IOCB_BUFF_COUNT 20
84 #define LPFC_HB_MBOX_INTERVAL 5 /* Heart beat interval in seconds. */
85 #define LPFC_HB_MBOX_TIMEOUT 30 /* Heart beat timeout in seconds. */
87 /* Error Attention event polling interval */
88 #define LPFC_ERATT_POLL_INTERVAL 5 /* EATT poll interval in seconds */
90 /* Define macros for 64 bit support */
91 #define putPaddrLow(addr) ((uint32_t) (0xffffffff & (u64)(addr)))
92 #define putPaddrHigh(addr) ((uint32_t) (0xffffffff & (((u64)(addr))>>32)))
93 #define getPaddr(high, low) ((dma_addr_t)( \
94 (( (u64)(high)<<16 ) << 16)|( (u64)(low))))
95 /* Provide maximum configuration definitions. */
96 #define LPFC_DRVR_TIMEOUT 16 /* driver iocb timeout value in sec */
97 #define FC_MAX_ADPTMSG 64
100 #define MAX_HBAS_NO_RESET 16
102 /* Number of MSI-X vectors the driver uses */
103 #define LPFC_MSIX_VECTORS 2
105 /* lpfc wait event data ready flag */
106 #define LPFC_DATA_READY 0 /* bit 0 */
108 /* queue dump line buffer size */
109 #define LPFC_LBUF_SZ 128
111 /* mailbox system shutdown options */
112 #define LPFC_MBX_NO_WAIT 0
113 #define LPFC_MBX_WAIT 1
115 enum lpfc_polling_flags {
116 ENABLE_FCP_RING_POLLING = 0x1,
117 DISABLE_FCP_RING_INT = 0x2
121 uint16_t cmd_cpu[40];
122 uint16_t rsp_cpu[40];
128 * Provide for FC4 TYPE x28 - NVME. The
129 * bit mask for FCP and NVME is 0x8 identically
130 * because they are 32 bit positions distance.
132 #define LPFC_FC4_TYPE_BITMASK 0x00000100
134 /* Provide DMA memory definitions the driver uses per port instance. */
136 struct list_head list;
137 void *virt; /* virtual address ptr */
138 dma_addr_t phys; /* mapped address */
139 uint32_t buffer_tag; /* used for tagged queue ring */
142 struct lpfc_nvmet_ctxbuf {
143 struct list_head list;
144 struct lpfc_nvmet_rcv_ctx *context;
145 struct lpfc_iocbq *iocbq;
146 struct lpfc_sglq *sglq;
147 struct work_struct defer_work;
150 struct lpfc_dma_pool {
151 struct lpfc_dmabuf *elements;
153 uint32_t current_count;
157 struct lpfc_dmabuf hbuf;
158 struct lpfc_dmabuf dbuf;
162 struct lpfc_cq_event cq_event;
163 unsigned long time_stamp;
168 struct lpfc_dmabuf hbuf;
169 struct lpfc_dmabuf dbuf;
173 struct lpfc_queue *hrq; /* ptr to associated Header RQ */
174 struct lpfc_queue *drq; /* ptr to associated Data RQ */
177 /* Priority bit. Set value to exceed low water mark in lpfc_mem. */
178 #define MEM_PRI 0x100
181 /****************************************************************************/
182 /* Device VPD save area */
183 /****************************************************************************/
184 typedef struct lpfc_vpd {
185 uint32_t status; /* vpd status value */
186 uint32_t length; /* number of bytes actually returned */
188 uint32_t rsvd1; /* Revision numbers */
196 uint8_t feaLevelHigh;
198 uint32_t postKernRev;
200 uint8_t opFwName[16];
202 uint8_t sli1FwName[16];
204 uint8_t sli2FwName[16];
207 #ifdef __BIG_ENDIAN_BITFIELD
208 uint32_t rsvd3 :19; /* Reserved */
209 uint32_t cdss : 1; /* Configure Data Security SLI */
210 uint32_t rsvd2 : 3; /* Reserved */
211 uint32_t cbg : 1; /* Configure BlockGuard */
212 uint32_t cmv : 1; /* Configure Max VPIs */
213 uint32_t ccrp : 1; /* Config Command Ring Polling */
214 uint32_t csah : 1; /* Configure Synchronous Abort Handling */
215 uint32_t chbs : 1; /* Cofigure Host Backing store */
216 uint32_t cinb : 1; /* Enable Interrupt Notification Block */
217 uint32_t cerbm : 1; /* Configure Enhanced Receive Buf Mgmt */
218 uint32_t cmx : 1; /* Configure Max XRIs */
219 uint32_t cmr : 1; /* Configure Max RPIs */
220 #else /* __LITTLE_ENDIAN */
221 uint32_t cmr : 1; /* Configure Max RPIs */
222 uint32_t cmx : 1; /* Configure Max XRIs */
223 uint32_t cerbm : 1; /* Configure Enhanced Receive Buf Mgmt */
224 uint32_t cinb : 1; /* Enable Interrupt Notification Block */
225 uint32_t chbs : 1; /* Cofigure Host Backing store */
226 uint32_t csah : 1; /* Configure Synchronous Abort Handling */
227 uint32_t ccrp : 1; /* Config Command Ring Polling */
228 uint32_t cmv : 1; /* Configure Max VPIs */
229 uint32_t cbg : 1; /* Configure BlockGuard */
230 uint32_t rsvd2 : 3; /* Reserved */
231 uint32_t cdss : 1; /* Configure Data Security SLI */
232 uint32_t rsvd3 :19; /* Reserved */
242 /* Statistics for ELS commands */
244 uint32_t elsRetryExceeded;
245 uint32_t elsXmitRetry;
246 uint32_t elsDelayRetry;
248 uint32_t elsRcvFrame;
252 uint32_t elsRcvFARPR;
253 uint32_t elsRcvFLOGI;
254 uint32_t elsRcvPLOGI;
255 uint32_t elsRcvADISC;
256 uint32_t elsRcvPDISC;
270 uint32_t elsXmitFLOGI;
271 uint32_t elsXmitFDISC;
272 uint32_t elsXmitPLOGI;
273 uint32_t elsXmitPRLI;
274 uint32_t elsXmitADISC;
275 uint32_t elsXmitLOGO;
277 uint32_t elsXmitRSCN;
278 uint32_t elsXmitRNID;
279 uint32_t elsXmitFARP;
280 uint32_t elsXmitFARPR;
282 uint32_t elsXmitLSRJT;
284 uint32_t frameRcvBcast;
285 uint32_t frameRcvMulti;
286 uint32_t strayXmitCmpl;
287 uint32_t frameXmitDelay;
292 uint32_t LinkMultiEvent;
297 uint32_t fcpRemoteStop;
299 uint32_t fcpPortBusy;
301 uint32_t fcpLocalErr;
307 enum discovery_state {
308 LPFC_VPORT_UNKNOWN = 0, /* vport state is unknown */
309 LPFC_VPORT_FAILED = 1, /* vport has failed */
310 LPFC_LOCAL_CFG_LINK = 6, /* local NPORT Id configured */
311 LPFC_FLOGI = 7, /* FLOGI sent to Fabric */
312 LPFC_FDISC = 8, /* FDISC sent for vport */
313 LPFC_FABRIC_CFG_LINK = 9, /* Fabric assigned NPORT Id
315 LPFC_NS_REG = 10, /* Register with NameServer */
316 LPFC_NS_QRY = 11, /* Query NameServer for NPort ID list */
317 LPFC_BUILD_DISC_LIST = 12, /* Build ADISC and PLOGI lists for
318 * device authentication / discovery */
319 LPFC_DISC_AUTH = 13, /* Processing ADISC list */
320 LPFC_VPORT_READY = 32,
324 LPFC_LINK_UNKNOWN = 0, /* HBA state is unknown */
325 LPFC_WARM_START = 1, /* HBA state after selective reset */
326 LPFC_INIT_START = 2, /* Initial state after board reset */
327 LPFC_INIT_MBX_CMDS = 3, /* Initialize HBA with mbox commands */
328 LPFC_LINK_DOWN = 4, /* HBA initialized, link is down */
329 LPFC_LINK_UP = 5, /* Link is up - issue READ_LA */
330 LPFC_CLEAR_LA = 6, /* authentication cmplt - issue
336 struct lpfc_trunk_link_state {
337 enum hba_state state;
341 struct lpfc_trunk_link {
342 struct lpfc_trunk_link_state link0,
349 struct lpfc_hba *phba;
350 struct list_head listentry;
352 #define LPFC_PHYSICAL_PORT 1
353 #define LPFC_NPIV_PORT 2
354 #define LPFC_FABRIC_PORT 3
355 enum discovery_state port_state;
360 #define LPFC_VPI_REGISTERED 0x1
362 uint32_t fc_flag; /* FC flags */
363 /* Several of these flags are HBA centric and should be moved to
364 * phba->link_flag (e.g. FC_PTP, FC_PUBLIC_LOOP)
366 #define FC_PT2PT 0x1 /* pt2pt with no fabric */
367 #define FC_PT2PT_PLOGI 0x2 /* pt2pt initiate PLOGI */
368 #define FC_DISC_TMO 0x4 /* Discovery timer running */
369 #define FC_PUBLIC_LOOP 0x8 /* Public loop */
370 #define FC_LBIT 0x10 /* LOGIN bit in loopinit set */
371 #define FC_RSCN_MODE 0x20 /* RSCN cmd rcv'ed */
372 #define FC_NLP_MORE 0x40 /* More node to process in node tbl */
373 #define FC_OFFLINE_MODE 0x80 /* Interface is offline for diag */
374 #define FC_FABRIC 0x100 /* We are fabric attached */
375 #define FC_VPORT_LOGO_RCVD 0x200 /* LOGO received on vport */
376 #define FC_RSCN_DISCOVERY 0x400 /* Auth all devices after RSCN */
377 #define FC_LOGO_RCVD_DID_CHNG 0x800 /* FDISC on phys port detect DID chng*/
378 #define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */
379 #define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */
380 #define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */
381 #define FC_BYPASSED_MODE 0x20000 /* NPort is in bypassed mode */
382 #define FC_VPORT_NEEDS_REG_VPI 0x80000 /* Needs to have its vpi registered */
383 #define FC_RSCN_DEFERRED 0x100000 /* A deferred RSCN being processed */
384 #define FC_VPORT_NEEDS_INIT_VPI 0x200000 /* Need to INIT_VPI before FDISC */
385 #define FC_VPORT_CVL_RCVD 0x400000 /* VLink failed due to CVL */
386 #define FC_VFI_REGISTERED 0x800000 /* VFI is registered */
387 #define FC_FDISC_COMPLETED 0x1000000/* FDISC completed */
388 #define FC_DISC_DELAYED 0x2000000/* Delay NPort discovery */
391 #define FC_CT_RFF_ID 0x1 /* RFF_ID accepted by switch */
392 #define FC_CT_RNN_ID 0x2 /* RNN_ID accepted by switch */
393 #define FC_CT_RSNN_NN 0x4 /* RSNN_NN accepted by switch */
394 #define FC_CT_RSPN_ID 0x8 /* RSPN_ID accepted by switch */
395 #define FC_CT_RFT_ID 0x10 /* RFT_ID accepted by switch */
397 struct list_head fc_nodes;
399 /* Keep counters for the number of entries in each list. */
400 uint16_t fc_plogi_cnt;
401 uint16_t fc_adisc_cnt;
402 uint16_t fc_reglogin_cnt;
403 uint16_t fc_prli_cnt;
404 uint16_t fc_unmap_cnt;
407 uint16_t fc_unused_cnt;
408 struct serv_parm fc_sparam; /* buffer for our service parameters */
410 uint32_t fc_myDID; /* fibre channel S_ID */
411 uint32_t fc_prevDID; /* previous fibre channel S_ID */
412 struct lpfc_name fabric_portname;
413 struct lpfc_name fabric_nodename;
415 int32_t stopped; /* HBA has not been restarted since last ERATT */
416 uint8_t fc_linkspeed; /* Link speed after last READ_LA */
418 uint32_t num_disc_nodes; /* in addition to hba_state */
419 uint32_t gidft_inp; /* cnt of outstanding GID_FTs */
421 uint32_t fc_nlp_cnt; /* outstanding NODELIST requests */
422 uint32_t fc_rscn_id_cnt; /* count of RSCNs payloads in list */
423 uint32_t fc_rscn_flush; /* flag use of fc_rscn_id_list */
424 struct lpfc_dmabuf *fc_rscn_id_list[FC_MAX_HOLD_RSCN];
425 struct lpfc_name fc_nodename; /* fc nodename */
426 struct lpfc_name fc_portname; /* fc portname */
428 struct lpfc_work_evt disc_timeout_evt;
430 struct timer_list fc_disctmo; /* Discovery rescue timer */
431 uint8_t fc_ns_retry; /* retries for fabric nameserver */
432 uint32_t fc_prli_sent; /* cntr for outstanding PRLIs */
434 spinlock_t work_port_lock;
435 uint32_t work_port_events; /* Timeout to be handled */
436 #define WORKER_DISC_TMO 0x1 /* vport: Discovery timeout */
437 #define WORKER_ELS_TMO 0x2 /* vport: ELS timeout */
438 #define WORKER_DELAYED_DISC_TMO 0x8 /* vport: delayed discovery */
440 #define WORKER_MBOX_TMO 0x100 /* hba: MBOX timeout */
441 #define WORKER_HB_TMO 0x200 /* hba: Heart beat timeout */
442 #define WORKER_FABRIC_BLOCK_TMO 0x400 /* hba: fabric block timeout */
443 #define WORKER_RAMP_DOWN_QUEUE 0x800 /* hba: Decrease Q depth */
444 #define WORKER_RAMP_UP_QUEUE 0x1000 /* hba: Increase Q depth */
445 #define WORKER_SERVICE_TXQ 0x2000 /* hba: IOCBs on the txq */
447 struct timer_list els_tmofunc;
448 struct timer_list delayed_disc_tmo;
453 #define FC_LOADING 0x1 /* HBA in process of loading drvr */
454 #define FC_UNLOADING 0x2 /* HBA in process of unloading drvr */
455 #define FC_ALLOW_FDMI 0x4 /* port is ready for FDMI requests */
456 /* Vport Config Parameters */
457 uint32_t cfg_scan_down;
458 uint32_t cfg_lun_queue_depth;
459 uint32_t cfg_nodev_tmo;
460 uint32_t cfg_devloss_tmo;
461 uint32_t cfg_restrict_login;
462 uint32_t cfg_peer_port_login;
463 uint32_t cfg_fcp_class;
464 uint32_t cfg_use_adisc;
465 uint32_t cfg_discovery_threads;
466 uint32_t cfg_log_verbose;
467 uint32_t cfg_enable_fc4_type;
468 uint32_t cfg_max_luns;
469 uint32_t cfg_enable_da_id;
470 uint32_t cfg_max_scsicmpl_time;
471 uint32_t cfg_tgt_queue_depth;
472 uint32_t cfg_first_burst_size;
473 uint32_t dev_loss_tmo_changed;
475 struct fc_vport *fc_vport;
477 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
478 struct dentry *debug_disc_trc;
479 struct dentry *debug_nodelist;
480 struct dentry *debug_nvmestat;
481 struct dentry *debug_scsistat;
482 struct dentry *debug_nvmektime;
483 struct dentry *debug_cpucheck;
484 struct dentry *vport_debugfs_root;
485 struct lpfc_debugfs_trc *disc_trc;
486 atomic_t disc_trc_cnt;
488 uint8_t stat_data_enabled;
489 uint8_t stat_data_blocked;
490 struct list_head rcv_buffer_list;
491 unsigned long rcv_buffer_time_stamp;
493 #define STATIC_VPORT 1
495 #define FAWWPN_PARAM_CHG 4
497 uint16_t fdmi_num_disc;
498 uint32_t fdmi_hba_mask;
499 uint32_t fdmi_port_mask;
501 /* There is a single nvme instance per vport. */
502 struct nvme_fc_local_port *localport;
503 uint8_t nvmei_support; /* driver supports NVME Initiator */
504 uint32_t last_fcp_wqidx;
505 uint32_t rcv_flogi_cnt; /* How many unsol FLOGIs ACK'd. */
509 uint16_t entry_count; /* Current number of HBQ slots */
510 uint16_t buffer_count; /* Current number of buffers posted */
511 uint32_t next_hbqPutIdx; /* Index to next HBQ slot to use */
512 uint32_t hbqPutIdx; /* HBQ slot to use */
513 uint32_t local_hbqGetIdx; /* Local copy of Get index from Port */
514 void *hbq_virt; /* Virtual ptr to this hbq */
515 struct list_head hbq_buffer_list; /* buffers assigned to this HBQ */
516 /* Callback for HBQ buffer allocation */
517 struct hbq_dmabuf *(*hbq_alloc_buffer) (struct lpfc_hba *);
518 /* Callback for HBQ buffer free */
519 void (*hbq_free_buffer) (struct lpfc_hba *,
520 struct hbq_dmabuf *);
523 /* this matches the position in the lpfc_hbq_defs array */
524 #define LPFC_ELS_HBQ 0
525 #define LPFC_MAX_HBQS 1
527 enum hba_temp_state {
539 #define LPFC_CT_CTX_MAX 64
540 struct unsol_rcv_ct_ctx {
544 #define UNSOL_INVALID 0
545 #define UNSOL_VALID 1
550 #define LPFC_USER_LINK_SPEED_AUTO 0 /* auto select (default)*/
551 #define LPFC_USER_LINK_SPEED_1G 1 /* 1 Gigabaud */
552 #define LPFC_USER_LINK_SPEED_2G 2 /* 2 Gigabaud */
553 #define LPFC_USER_LINK_SPEED_4G 4 /* 4 Gigabaud */
554 #define LPFC_USER_LINK_SPEED_8G 8 /* 8 Gigabaud */
555 #define LPFC_USER_LINK_SPEED_10G 10 /* 10 Gigabaud */
556 #define LPFC_USER_LINK_SPEED_16G 16 /* 16 Gigabaud */
557 #define LPFC_USER_LINK_SPEED_32G 32 /* 32 Gigabaud */
558 #define LPFC_USER_LINK_SPEED_64G 64 /* 64 Gigabaud */
559 #define LPFC_USER_LINK_SPEED_MAX LPFC_USER_LINK_SPEED_64G
561 #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16, 32, 64"
583 struct lpfc_mbox_ext_buf_ctx {
585 #define LPFC_BSG_MBOX_IDLE 0
586 #define LPFC_BSG_MBOX_HOST 1
587 #define LPFC_BSG_MBOX_PORT 2
588 #define LPFC_BSG_MBOX_DONE 3
589 #define LPFC_BSG_MBOX_ABTS 4
590 enum nemb_type nembType;
591 enum mbox_type mboxType;
595 struct lpfc_dmabuf *mbx_dmabuf;
596 struct list_head ext_dmabuf_list;
599 struct lpfc_epd_pool {
601 struct list_head list;
603 spinlock_t lock; /* lock for expedite pool */
606 struct lpfc_ras_fwlog {
608 uint32_t fw_buffcount; /* Buffer size posted to FW */
609 #define LPFC_RAS_BUFF_ENTERIES 16 /* Each entry can hold max of 64k */
610 #define LPFC_RAS_MAX_ENTRY_SIZE (64 * 1024)
611 #define LPFC_RAS_MIN_BUFF_POST_SIZE (256 * 1024)
612 #define LPFC_RAS_MAX_BUFF_POST_SIZE (1024 * 1024)
613 uint32_t fw_loglevel; /* Log level set */
614 struct lpfc_dmabuf lwpd;
615 struct list_head fwlog_buff_list;
617 /* RAS support status on adapter */
618 bool ras_hwsupport; /* RAS Support available on HW or not */
619 bool ras_enabled; /* Ras Enabled for the function */
620 #define LPFC_RAS_DISABLE_LOGGING 0x00
621 #define LPFC_RAS_ENABLE_LOGGING 0x01
622 bool ras_active; /* RAS logging running state */
626 /* SCSI interface function jump table entries */
627 struct lpfc_io_buf * (*lpfc_get_scsi_buf)
628 (struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
629 struct scsi_cmnd *cmnd);
630 int (*lpfc_scsi_prep_dma_buf)
631 (struct lpfc_hba *, struct lpfc_io_buf *);
632 void (*lpfc_scsi_unprep_dma_buf)
633 (struct lpfc_hba *, struct lpfc_io_buf *);
634 void (*lpfc_release_scsi_buf)
635 (struct lpfc_hba *, struct lpfc_io_buf *);
636 void (*lpfc_rampdown_queue_depth)
638 void (*lpfc_scsi_prep_cmnd)
639 (struct lpfc_vport *, struct lpfc_io_buf *,
640 struct lpfc_nodelist *);
642 /* IOCB interface function jump table entries */
643 int (*__lpfc_sli_issue_iocb)
644 (struct lpfc_hba *, uint32_t,
645 struct lpfc_iocbq *, uint32_t);
646 void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
647 struct lpfc_iocbq *);
648 int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
649 IOCB_t * (*lpfc_get_iocb_from_iocbq)
650 (struct lpfc_iocbq *);
651 void (*lpfc_scsi_cmd_iocb_cmpl)
652 (struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *);
654 /* MBOX interface function jump table entries */
655 int (*lpfc_sli_issue_mbox)
656 (struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
658 /* Slow-path IOCB process function jump table entries */
659 void (*lpfc_sli_handle_slow_ring_event)
660 (struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
663 /* INIT device interface function jump table entries */
664 int (*lpfc_sli_hbq_to_firmware)
665 (struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
666 int (*lpfc_sli_brdrestart)
668 int (*lpfc_sli_brdready)
669 (struct lpfc_hba *, uint32_t);
670 void (*lpfc_handle_eratt)
672 void (*lpfc_stop_port)
674 int (*lpfc_hba_init_link)
675 (struct lpfc_hba *, uint32_t);
676 int (*lpfc_hba_down_link)
677 (struct lpfc_hba *, uint32_t);
678 int (*lpfc_selective_reset)
681 int (*lpfc_bg_scsi_prep_dma_buf)
682 (struct lpfc_hba *, struct lpfc_io_buf *);
683 /* Add new entries here */
686 struct lpfc_epd_pool epd_pool;
688 /* SLI4 specific HBA data structure */
689 struct lpfc_sli4_hba sli4_hba;
691 struct workqueue_struct *wq;
692 struct delayed_work eq_delay_work;
695 uint8_t pci_dev_grp; /* lpfc PCI dev group: 0x0, 0x1, 0x2,... */
696 uint32_t sli_rev; /* SLI2, SLI3, or SLI4 */
697 uint32_t sli3_options; /* Mask of enabled SLI3 options */
698 #define LPFC_SLI3_HBQ_ENABLED 0x01
699 #define LPFC_SLI3_NPIV_ENABLED 0x02
700 #define LPFC_SLI3_VPORT_TEARDOWN 0x04
701 #define LPFC_SLI3_CRP_ENABLED 0x08
702 #define LPFC_SLI3_BG_ENABLED 0x20
703 #define LPFC_SLI3_DSS_ENABLED 0x40
704 #define LPFC_SLI4_PERFH_ENABLED 0x80
705 #define LPFC_SLI4_PHWQ_ENABLED 0x100
706 uint32_t iocb_cmd_size;
707 uint32_t iocb_rsp_size;
709 struct lpfc_trunk_link trunk_link;
710 enum hba_state link_state;
711 uint32_t link_flag; /* link state flags */
712 #define LS_LOOPBACK_MODE 0x1 /* NPort is in Loopback mode */
713 /* This flag is set while issuing */
714 /* INIT_LINK mailbox command */
715 #define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */
716 #define LS_IGNORE_ERATT 0x4 /* intr handler should ignore ERATT */
717 #define LS_MDS_LINK_DOWN 0x8 /* MDS Diagnostics Link Down */
718 #define LS_MDS_LOOPBACK 0x10 /* MDS Diagnostics Link Up (Loopback) */
720 uint32_t hba_flag; /* hba generic flags */
721 #define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
722 #define DEFER_ERATT 0x2 /* Deferred error attention in progress */
723 #define HBA_FCOE_MODE 0x4 /* HBA function in FCoE Mode */
724 #define HBA_SP_QUEUE_EVT 0x8 /* Slow-path qevt posted to worker thread*/
725 #define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
726 #define ELS_XRI_ABORT_EVENT 0x40
727 #define ASYNC_EVENT 0x80
728 #define LINK_DISABLED 0x100 /* Link disabled by user */
729 #define FCF_TS_INPROG 0x200 /* FCF table scan in progress */
730 #define FCF_RR_INPROG 0x400 /* FCF roundrobin flogi in progress */
731 #define HBA_FIP_SUPPORT 0x800 /* FIP support in HBA */
732 #define HBA_AER_ENABLED 0x1000 /* AER enabled with HBA */
733 #define HBA_DEVLOSS_TMO 0x2000 /* HBA in devloss timeout */
734 #define HBA_RRQ_ACTIVE 0x4000 /* process the rrq active list */
735 #define HBA_FCP_IOQ_FLUSH 0x8000 /* FCP I/O queues being flushed */
736 #define HBA_FW_DUMP_OP 0x10000 /* Skips fn reset before FW dump */
737 #define HBA_RECOVERABLE_UE 0x20000 /* Firmware supports recoverable UE */
738 #define HBA_FORCED_LINK_SPEED 0x40000 /*
739 * Firmware supports Forced Link Speed
742 #define HBA_NVME_IOQ_FLUSH 0x80000 /* NVME IO queues flushed. */
743 #define HBA_FLOGI_ISSUED 0x100000 /* FLOGI was issued */
745 uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
746 struct lpfc_dmabuf slim2p;
750 struct lpfc_mbox_ext_buf_ctx mbox_ext_buf_ctx;
755 struct lpfc_dmabuf hbqslimp;
757 uint16_t pci_cfg_value;
759 uint8_t fc_linkspeed; /* Link speed after last READ_LA */
761 uint32_t fc_eventTag; /* event tag for link attention */
762 uint32_t link_events;
764 /* These fields used to be binfo */
765 uint32_t fc_pref_DID; /* preferred D_ID */
766 uint8_t fc_pref_ALPA; /* preferred AL_PA */
767 uint32_t fc_edtovResol; /* E_D_TOV timer resolution */
768 uint32_t fc_edtov; /* E_D_TOV timer value */
769 uint32_t fc_arbtov; /* ARB_TOV timer value */
770 uint32_t fc_ratov; /* R_A_TOV timer value */
771 uint32_t fc_rttov; /* R_T_TOV timer value */
772 uint32_t fc_altov; /* AL_TOV timer value */
773 uint32_t fc_crtov; /* C_R_TOV timer value */
775 struct serv_parm fc_fabparam; /* fabric service parameters buffer */
776 uint8_t alpa_map[128]; /* AL_PA map from READ_LA */
780 uint32_t fc_topology; /* link topology, from LINK INIT */
781 uint32_t fc_topology_changed; /* link topology, from LINK INIT */
783 struct lpfc_stats fc_stat;
785 struct lpfc_nodelist fc_fcpnodev; /* nodelist entry for no device */
786 uint32_t nport_event_cnt; /* timestamp for nlplist entry */
790 uint32_t RandomData[7];
791 uint8_t fcp_embed_io;
792 uint8_t nvme_support; /* Firmware supports NVME */
793 uint8_t nvmet_support; /* driver supports NVMET */
794 #define LPFC_NVMET_MAX_PORTS 32
795 uint8_t mds_diags_support;
796 uint8_t bbcredit_support;
797 uint8_t enab_exp_wqcq_pages;
799 /* HBA Config Parameters */
801 uint32_t cfg_xri_rebalancing;
802 uint32_t cfg_enable_npiv;
803 uint32_t cfg_enable_rrq;
804 uint32_t cfg_topology;
805 uint32_t cfg_link_speed;
806 #define LPFC_FCF_FOV 1 /* Fast fcf failover */
807 #define LPFC_FCF_PRIORITY 2 /* Priority fcf failover */
808 uint32_t cfg_fcf_failover_policy;
809 uint32_t cfg_fcp_io_sched;
810 uint32_t cfg_ns_query;
811 uint32_t cfg_fcp2_no_tgt_reset;
812 uint32_t cfg_cr_delay;
813 uint32_t cfg_cr_count;
814 uint32_t cfg_multi_ring_support;
815 uint32_t cfg_multi_ring_rctl;
816 uint32_t cfg_multi_ring_type;
818 uint32_t cfg_poll_tmo;
819 uint32_t cfg_task_mgmt_tmo;
820 uint32_t cfg_use_msi;
821 uint32_t cfg_auto_imax;
822 uint32_t cfg_fcp_imax;
823 uint32_t cfg_force_rscn;
824 uint32_t cfg_cq_poll_threshold;
825 uint32_t cfg_cq_max_proc_limit;
826 uint32_t cfg_fcp_cpu_map;
827 uint32_t cfg_hdw_queue;
828 uint32_t cfg_irq_chann;
829 uint32_t cfg_suppress_rsp;
830 uint32_t cfg_nvme_oas;
831 uint32_t cfg_nvme_embed_cmd;
832 uint32_t cfg_nvmet_mrq_post;
833 uint32_t cfg_nvmet_mrq;
834 uint32_t cfg_enable_nvmet;
835 uint32_t cfg_nvme_enable_fb;
836 uint32_t cfg_nvmet_fb_size;
837 uint32_t cfg_total_seg_cnt;
838 uint32_t cfg_sg_seg_cnt;
839 uint32_t cfg_nvme_seg_cnt;
840 uint32_t cfg_scsi_seg_cnt;
841 uint32_t cfg_sg_dma_buf_size;
842 uint64_t cfg_soft_wwnn;
843 uint64_t cfg_soft_wwpn;
844 uint32_t cfg_hba_queue_depth;
845 uint32_t cfg_enable_hba_reset;
846 uint32_t cfg_enable_hba_heartbeat;
848 uint32_t cfg_EnableXLane;
849 uint8_t cfg_oas_tgt_wwpn[8];
850 uint8_t cfg_oas_vpt_wwpn[8];
851 uint32_t cfg_oas_lun_state;
852 #define OAS_LUN_ENABLE 1
853 #define OAS_LUN_DISABLE 0
854 uint32_t cfg_oas_lun_status;
855 #define OAS_LUN_STATUS_EXISTS 0x01
856 uint32_t cfg_oas_flags;
857 #define OAS_FIND_ANY_VPORT 0x01
858 #define OAS_FIND_ANY_TARGET 0x02
859 #define OAS_LUN_VALID 0x04
860 uint32_t cfg_oas_priority;
861 uint32_t cfg_XLanePriority;
862 uint32_t cfg_enable_bg;
863 uint32_t cfg_prot_mask;
864 uint32_t cfg_prot_guard;
865 uint32_t cfg_hostmem_hgp;
866 uint32_t cfg_log_verbose;
867 uint32_t cfg_enable_fc4_type;
868 uint32_t cfg_aer_support;
869 uint32_t cfg_sriov_nr_virtfn;
870 uint32_t cfg_request_firmware_upgrade;
871 uint32_t cfg_iocb_cnt;
872 uint32_t cfg_suppress_link_up;
873 uint32_t cfg_rrq_xri_bitmap_sz;
874 uint32_t cfg_delay_discovery;
875 uint32_t cfg_sli_mode;
876 #define LPFC_INITIALIZE_LINK 0 /* do normal init_link mbox */
877 #define LPFC_DELAY_INIT_LINK 1 /* layered driver hold off */
878 #define LPFC_DELAY_INIT_LINK_INDEFINITELY 2 /* wait, manual intervention */
879 uint32_t cfg_enable_dss;
880 uint32_t cfg_fdmi_on;
881 #define LPFC_FDMI_NO_SUPPORT 0 /* FDMI not supported */
882 #define LPFC_FDMI_SUPPORT 1 /* FDMI supported? */
883 uint32_t cfg_enable_SmartSAN;
884 uint32_t cfg_enable_mds_diags;
885 uint32_t cfg_ras_fwlog_level;
886 uint32_t cfg_ras_fwlog_buffsize;
887 uint32_t cfg_ras_fwlog_func;
888 uint32_t cfg_enable_bbcr; /* Enable BB Credit Recovery */
889 uint32_t cfg_enable_dpp; /* Enable Direct Packet Push */
890 #define LPFC_ENABLE_FCP 1
891 #define LPFC_ENABLE_NVME 2
892 #define LPFC_ENABLE_BOTH 3
893 uint32_t cfg_enable_pbde;
894 struct nvmet_fc_target_port *targetport;
895 lpfc_vpd_t vpd; /* vital product data */
897 struct pci_dev *pcidev;
898 struct list_head work_list;
899 uint32_t work_ha; /* Host Attention Bits for WT */
900 uint32_t work_ha_mask; /* HA Bits owned by WT */
901 uint32_t work_hs; /* HS stored in case of ERRAT */
902 uint32_t work_status[2]; /* Extra status from SLIM */
904 wait_queue_head_t work_waitq;
905 struct task_struct *worker_thread;
906 unsigned long data_flags;
908 uint32_t hbq_in_use; /* HBQs in use flag */
909 uint32_t hbq_count; /* Count of configured HBQs */
910 struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies */
912 atomic_t fcp_qidx; /* next FCP WQ (RR Policy) */
913 atomic_t nvme_qidx; /* next NVME WQ (RR Policy) */
915 phys_addr_t pci_bar0_map; /* Physical address for PCI BAR0 */
916 phys_addr_t pci_bar1_map; /* Physical address for PCI BAR1 */
917 phys_addr_t pci_bar2_map; /* Physical address for PCI BAR2 */
918 void __iomem *slim_memmap_p; /* Kernel memory mapped address for
920 void __iomem *ctrl_regs_memmap_p;/* Kernel memory mapped address for
923 void __iomem *pci_bar0_memmap_p; /* Kernel memory mapped address for
924 PCI BAR0 with dual-ULP support */
925 void __iomem *pci_bar2_memmap_p; /* Kernel memory mapped address for
926 PCI BAR2 with dual-ULP support */
927 void __iomem *pci_bar4_memmap_p; /* Kernel memory mapped address for
928 PCI BAR4 with dual-ULP support */
929 #define PCI_64BIT_BAR0 0
930 #define PCI_64BIT_BAR2 2
931 #define PCI_64BIT_BAR4 4
932 void __iomem *MBslimaddr; /* virtual address for mbox cmds */
933 void __iomem *HAregaddr; /* virtual address for host attn reg */
934 void __iomem *CAregaddr; /* virtual address for chip attn reg */
935 void __iomem *HSregaddr; /* virtual address for host status
937 void __iomem *HCregaddr; /* virtual address for host ctl reg */
939 struct lpfc_hgp __iomem *host_gp; /* Host side get/put pointers */
940 struct lpfc_pgp *port_gp;
941 uint32_t __iomem *hbq_put; /* Address in SLIM to HBQ put ptrs */
942 uint32_t *hbq_get; /* Host mem address of HBQ get ptrs */
944 int brd_no; /* FC board number */
945 char SerialNumber[32]; /* adapter Serial Number */
946 char OptionROMVersion[32]; /* adapter BIOS / Fcode version */
947 char BIOSVersion[16]; /* Boot BIOS version */
948 char ModelDesc[256]; /* Model Description */
949 char ModelName[80]; /* Model Name */
950 char ProgramType[256]; /* Program Type */
951 char Port[20]; /* Port No */
952 uint8_t vpd_flag; /* VPD data flag */
954 #define VPD_MODEL_DESC 0x1 /* valid vpd model description */
955 #define VPD_MODEL_NAME 0x2 /* valid vpd model name */
956 #define VPD_PROGRAM_TYPE 0x4 /* valid vpd program type */
957 #define VPD_PORT 0x8 /* valid vpd port data */
958 #define VPD_MASK 0xf /* mask for any vpd data */
960 uint8_t soft_wwn_enable;
962 struct timer_list fcp_poll_timer;
963 struct timer_list eratt_poll;
964 uint32_t eratt_poll_interval;
966 uint64_t bg_guard_err_cnt;
967 uint64_t bg_apptag_err_cnt;
968 uint64_t bg_reftag_err_cnt;
971 spinlock_t scsi_buf_list_get_lock; /* SCSI buf alloc list lock */
972 spinlock_t scsi_buf_list_put_lock; /* SCSI buf free list lock */
973 struct list_head lpfc_scsi_buf_list_get;
974 struct list_head lpfc_scsi_buf_list_put;
975 uint32_t total_scsi_bufs;
976 struct list_head lpfc_iocb_list;
977 uint32_t total_iocbq_bufs;
978 struct list_head active_rrq_list;
982 struct dma_pool *lpfc_sg_dma_buf_pool;
983 struct dma_pool *lpfc_mbuf_pool;
984 struct dma_pool *lpfc_hrb_pool; /* header receive buffer pool */
985 struct dma_pool *lpfc_drb_pool; /* data receive buffer pool */
986 struct dma_pool *lpfc_nvmet_drb_pool; /* data receive buffer pool */
987 struct dma_pool *lpfc_hbq_pool; /* SLI3 hbq buffer pool */
988 struct dma_pool *txrdy_payload_pool;
989 struct lpfc_dma_pool lpfc_mbuf_safety_pool;
991 mempool_t *mbox_mem_pool;
992 mempool_t *nlp_mem_pool;
994 mempool_t *active_rrq_pool;
996 struct fc_host_statistics link_stats;
997 enum intr_type_t intr_type;
999 #define LPFC_INTR_ERROR 0xFFFFFFFF
1000 struct list_head port_list;
1001 spinlock_t port_list_lock; /* lock for port_list mutations */
1002 struct lpfc_vport *pport; /* physical lpfc_vport pointer */
1003 uint16_t max_vpi; /* Maximum virtual nports */
1004 #define LPFC_MAX_VPI 0xFF /* Max number VPI supported 0 - 0xff */
1005 #define LPFC_MAX_VPORTS 0x100 /* Max vports per port, with pport */
1006 uint16_t max_vports; /*
1007 * For IOV HBAs max_vpi can change
1008 * after a reset. max_vports is max
1009 * number of vports present. This can
1010 * be greater than max_vpi.
1014 unsigned long *vpi_bmask; /* vpi allocation table */
1017 struct list_head lpfc_vpi_blk_list;
1019 /* Data structure used by fabric iocb scheduler */
1020 struct list_head fabric_iocb_list;
1021 atomic_t fabric_iocb_count;
1022 struct timer_list fabric_block_timer;
1023 unsigned long bit_flags;
1024 #define FABRIC_COMANDS_BLOCKED 0
1025 atomic_t num_rsrc_err;
1026 atomic_t num_cmd_success;
1027 unsigned long last_rsrc_error_time;
1028 unsigned long last_ramp_down_time;
1029 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1030 struct dentry *hba_debugfs_root;
1031 atomic_t debugfs_vport_count;
1032 struct dentry *debug_multixri_pools;
1033 struct dentry *debug_hbqinfo;
1034 struct dentry *debug_dumpHostSlim;
1035 struct dentry *debug_dumpHBASlim;
1036 struct dentry *debug_dumpData; /* BlockGuard BPL */
1037 struct dentry *debug_dumpDif; /* BlockGuard BPL */
1038 struct dentry *debug_InjErrLBA; /* LBA to inject errors at */
1039 struct dentry *debug_InjErrNPortID; /* NPortID to inject errors at */
1040 struct dentry *debug_InjErrWWPN; /* WWPN to inject errors at */
1041 struct dentry *debug_writeGuard; /* inject write guard_tag errors */
1042 struct dentry *debug_writeApp; /* inject write app_tag errors */
1043 struct dentry *debug_writeRef; /* inject write ref_tag errors */
1044 struct dentry *debug_readGuard; /* inject read guard_tag errors */
1045 struct dentry *debug_readApp; /* inject read app_tag errors */
1046 struct dentry *debug_readRef; /* inject read ref_tag errors */
1048 struct dentry *debug_nvmeio_trc;
1049 struct lpfc_debugfs_nvmeio_trc *nvmeio_trc;
1050 struct dentry *debug_hdwqinfo;
1051 #ifdef LPFC_HDWQ_LOCK_STAT
1052 struct dentry *debug_lockstat;
1054 atomic_t nvmeio_trc_cnt;
1055 uint32_t nvmeio_trc_size;
1056 uint32_t nvmeio_trc_output_idx;
1058 /* T10 DIF error injection */
1059 uint32_t lpfc_injerr_wgrd_cnt;
1060 uint32_t lpfc_injerr_wapp_cnt;
1061 uint32_t lpfc_injerr_wref_cnt;
1062 uint32_t lpfc_injerr_rgrd_cnt;
1063 uint32_t lpfc_injerr_rapp_cnt;
1064 uint32_t lpfc_injerr_rref_cnt;
1065 uint32_t lpfc_injerr_nportid;
1066 struct lpfc_name lpfc_injerr_wwpn;
1067 sector_t lpfc_injerr_lba;
1068 #define LPFC_INJERR_LBA_OFF (sector_t)(-1)
1070 struct dentry *debug_slow_ring_trc;
1071 struct lpfc_debugfs_trc *slow_ring_trc;
1072 atomic_t slow_ring_trc_cnt;
1073 /* iDiag debugfs sub-directory */
1074 struct dentry *idiag_root;
1075 struct dentry *idiag_pci_cfg;
1076 struct dentry *idiag_bar_acc;
1077 struct dentry *idiag_que_info;
1078 struct dentry *idiag_que_acc;
1079 struct dentry *idiag_drb_acc;
1080 struct dentry *idiag_ctl_acc;
1081 struct dentry *idiag_mbx_acc;
1082 struct dentry *idiag_ext_acc;
1083 uint8_t lpfc_idiag_last_eq;
1085 uint16_t nvmeio_trc_on;
1087 /* Used for deferred freeing of ELS data buffers */
1088 struct list_head elsbuf;
1090 int elsbuf_prev_cnt;
1092 uint8_t temp_sensor_support;
1093 /* Fields used for heart beat. */
1094 unsigned long last_completion_time;
1095 unsigned long skipped_hb;
1096 struct timer_list hb_tmofunc;
1097 uint8_t hb_outstanding;
1098 struct timer_list rrq_tmr;
1099 enum hba_temp_state over_temp_state;
1100 /* ndlp reference management */
1101 spinlock_t ndlp_lock;
1103 * Following bit will be set for all buffer tags which are not
1104 * associated with any HBQ.
1106 #define QUE_BUFTAG_BIT (1<<31)
1107 uint32_t buffer_tag_count;
1108 int wait_4_mlo_maint_flg;
1109 wait_queue_head_t wait_4_mlo_m_q;
1110 /* data structure used for latency data collection */
1111 #define LPFC_NO_BUCKET 0
1112 #define LPFC_LINEAR_BUCKET 1
1113 #define LPFC_POWER2_BUCKET 2
1114 uint8_t bucket_type;
1115 uint32_t bucket_base;
1116 uint32_t bucket_step;
1118 /* Maximum number of events that can be outstanding at any time*/
1119 #define LPFC_MAX_EVT_COUNT 512
1120 atomic_t fast_event_count;
1121 uint32_t fcoe_eventtag;
1122 uint32_t fcoe_eventtag_at_fcf_scan;
1123 uint32_t fcoe_cvl_eventtag;
1124 uint32_t fcoe_cvl_eventtag_attn;
1125 struct lpfc_fcf fcf;
1129 struct list_head fcf_conn_rec_list;
1131 bool defer_flogi_acc_flag;
1132 uint16_t defer_flogi_acc_rx_id;
1133 uint16_t defer_flogi_acc_ox_id;
1135 spinlock_t ct_ev_lock; /* synchronize access to ct_ev_waiters */
1136 struct list_head ct_ev_waiters;
1137 struct unsol_rcv_ct_ctx ct_ctx[LPFC_CT_CTX_MAX];
1141 struct lpfc_ras_fwlog ras_fwlog;
1143 uint8_t menlo_flag; /* menlo generic flags */
1144 #define HBA_MENLO_SUPPORT 0x1 /* HBA supports menlo commands */
1148 uint8_t fips_spec_rev;
1150 spinlock_t devicelock; /* lock for luns list */
1151 mempool_t *device_data_mem_pool;
1152 struct list_head luns;
1153 #define LPFC_TRANSGRESSION_HIGH_TEMPERATURE 0x0080
1154 #define LPFC_TRANSGRESSION_LOW_TEMPERATURE 0x0040
1155 #define LPFC_TRANSGRESSION_HIGH_VOLTAGE 0x0020
1156 #define LPFC_TRANSGRESSION_LOW_VOLTAGE 0x0010
1157 #define LPFC_TRANSGRESSION_HIGH_TXBIAS 0x0008
1158 #define LPFC_TRANSGRESSION_LOW_TXBIAS 0x0004
1159 #define LPFC_TRANSGRESSION_HIGH_TXPOWER 0x0002
1160 #define LPFC_TRANSGRESSION_LOW_TXPOWER 0x0001
1161 #define LPFC_TRANSGRESSION_HIGH_RXPOWER 0x8000
1162 #define LPFC_TRANSGRESSION_LOW_RXPOWER 0x4000
1164 uint16_t sfp_warning;
1166 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1167 uint16_t cpucheck_on;
1168 #define LPFC_CHECK_OFF 0
1169 #define LPFC_CHECK_NVME_IO 1
1170 #define LPFC_CHECK_NVMET_RCV 2
1171 #define LPFC_CHECK_NVMET_IO 4
1172 #define LPFC_CHECK_SCSI_IO 8
1174 uint64_t ktime_data_samples;
1175 uint64_t ktime_status_samples;
1176 uint64_t ktime_last_cmd;
1177 uint64_t ktime_seg1_total;
1178 uint64_t ktime_seg1_min;
1179 uint64_t ktime_seg1_max;
1180 uint64_t ktime_seg2_total;
1181 uint64_t ktime_seg2_min;
1182 uint64_t ktime_seg2_max;
1183 uint64_t ktime_seg3_total;
1184 uint64_t ktime_seg3_min;
1185 uint64_t ktime_seg3_max;
1186 uint64_t ktime_seg4_total;
1187 uint64_t ktime_seg4_min;
1188 uint64_t ktime_seg4_max;
1189 uint64_t ktime_seg5_total;
1190 uint64_t ktime_seg5_min;
1191 uint64_t ktime_seg5_max;
1192 uint64_t ktime_seg6_total;
1193 uint64_t ktime_seg6_min;
1194 uint64_t ktime_seg6_max;
1195 uint64_t ktime_seg7_total;
1196 uint64_t ktime_seg7_min;
1197 uint64_t ktime_seg7_max;
1198 uint64_t ktime_seg8_total;
1199 uint64_t ktime_seg8_min;
1200 uint64_t ktime_seg8_max;
1201 uint64_t ktime_seg9_total;
1202 uint64_t ktime_seg9_min;
1203 uint64_t ktime_seg9_max;
1204 uint64_t ktime_seg10_total;
1205 uint64_t ktime_seg10_min;
1206 uint64_t ktime_seg10_max;
1210 static inline struct Scsi_Host *
1211 lpfc_shost_from_vport(struct lpfc_vport *vport)
1213 return container_of((void *) vport, struct Scsi_Host, hostdata[0]);
1217 lpfc_set_loopback_flag(struct lpfc_hba *phba)
1219 if (phba->cfg_topology == FLAGS_LOCAL_LB)
1220 phba->link_flag |= LS_LOOPBACK_MODE;
1222 phba->link_flag &= ~LS_LOOPBACK_MODE;
1226 lpfc_is_link_up(struct lpfc_hba *phba)
1228 return phba->link_state == LPFC_LINK_UP ||
1229 phba->link_state == LPFC_CLEAR_LA ||
1230 phba->link_state == LPFC_HBA_READY;
1234 lpfc_worker_wake_up(struct lpfc_hba *phba)
1236 /* Set the lpfc data pending flag */
1237 set_bit(LPFC_DATA_READY, &phba->data_flags);
1239 /* Wake up worker thread */
1240 wake_up(&phba->work_waitq);
1245 lpfc_readl(void __iomem *addr, uint32_t *data)
1249 if (temp == 0xffffffff)
1256 lpfc_sli_read_hs(struct lpfc_hba *phba)
1259 * There was a link/board error. Read the status register to retrieve
1260 * the error event and process it.
1262 phba->sli.slistat.err_attn_event++;
1264 /* Save status info and check for unplug error */
1265 if (lpfc_readl(phba->HSregaddr, &phba->work_hs) ||
1266 lpfc_readl(phba->MBslimaddr + 0xa8, &phba->work_status[0]) ||
1267 lpfc_readl(phba->MBslimaddr + 0xac, &phba->work_status[1])) {
1271 /* Clear chip Host Attention error bit */
1272 writel(HA_ERATT, phba->HAregaddr);
1273 readl(phba->HAregaddr); /* flush */
1274 phba->pport->stopped = 1;
1279 static inline struct lpfc_sli_ring *
1280 lpfc_phba_elsring(struct lpfc_hba *phba)
1282 /* Return NULL if sli_rev has become invalid due to bad fw */
1283 if (phba->sli_rev != LPFC_SLI_REV4 &&
1284 phba->sli_rev != LPFC_SLI_REV3 &&
1285 phba->sli_rev != LPFC_SLI_REV2)
1288 if (phba->sli_rev == LPFC_SLI_REV4) {
1289 if (phba->sli4_hba.els_wq)
1290 return phba->sli4_hba.els_wq->pring;
1294 return &phba->sli.sli3_ring[LPFC_ELS_RING];
1298 * lpfc_sli4_mod_hba_eq_delay - update EQ delay
1299 * @phba: Pointer to HBA context object.
1300 * @q: The Event Queue to update.
1301 * @delay: The delay value (in us) to be written.
1305 lpfc_sli4_mod_hba_eq_delay(struct lpfc_hba *phba, struct lpfc_queue *eq,
1308 struct lpfc_register reg_data;
1311 bf_set(lpfc_sliport_eqdelay_id, ®_data, eq->queue_id);
1312 bf_set(lpfc_sliport_eqdelay_delay, ®_data, delay);
1313 writel(reg_data.word0, phba->sli4_hba.u.if_type2.EQDregaddr);