12 This framework is designed to provide a generic interface for PHY
13 devices present in the kernel. This layer will have the generic
14 API by which phy drivers can create PHY using the phy framework and
15 phy users can obtain reference to the PHY. All the users of this
16 framework should select this config.
18 config PHY_BERLIN_SATA
19 tristate "Marvell Berlin SATA PHY driver"
20 depends on ARCH_BERLIN && HAS_IOMEM && OF
23 Enable this to support the SATA PHY on Marvell Berlin SoCs.
25 config PHY_EXYNOS_MIPI_VIDEO
26 tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
28 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
30 default y if ARCH_S5PV210 || ARCH_EXYNOS
32 Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
37 depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
42 tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
44 depends on GENERIC_PHY
48 Enable this to support the miphy transceiver (for SATA/PCIE)
49 that is part of STMicroelectronics STiH41x SoC series.
51 config OMAP_CONTROL_PHY
52 tristate "OMAP CONTROL PHY Driver"
53 depends on ARCH_OMAP2PLUS || COMPILE_TEST
55 Enable this to add support for the PHY part present in the control
56 module. This driver has API to power on the USB2 PHY and to write to
57 the mailbox. The mailbox is present only in omap4 and the register to
58 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
59 additional register to power on USB3 PHY/SATA PHY/PCIE PHY
63 tristate "OMAP USB2 PHY Driver"
64 depends on ARCH_OMAP2PLUS
67 select OMAP_CONTROL_PHY
68 depends on OMAP_OCP2SCP
70 Enable this to support the transceiver that is part of SOC. This
71 driver takes care of all the PHY functionality apart from comparator.
72 The USB OTG controller communicates with the comparator using this
76 tristate "TI PIPE3 PHY Driver"
77 depends on ARCH_OMAP2PLUS || COMPILE_TEST
79 select OMAP_CONTROL_PHY
80 depends on OMAP_OCP2SCP
82 Enable this to support the PIPE3 PHY that is part of TI SOCs. This
83 driver takes care of all the PHY functionality apart from comparator.
84 This driver interacts with the "OMAP Control PHY Driver" to power
88 tristate "TWL4030 USB Transceiver Driver"
89 depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
93 Enable this to support the USB OTG transceiver on TWL4030
94 family chips (including the TWL5030 and TPS659x0 devices).
95 This transceiver supports high and full speed devices plus,
96 in host mode, low speed.
98 config PHY_EXYNOS_DP_VIDEO
99 tristate "EXYNOS SoC series Display Port PHY driver"
101 depends on ARCH_EXYNOS || COMPILE_TEST
105 Support for Display Port PHY found on Samsung EXYNOS SoCs.
107 config BCM_KONA_USB2_PHY
108 tristate "Broadcom Kona USB2 PHY Driver"
112 Enable this to support the Broadcom Kona USB 2.0 PHY.
114 config PHY_EXYNOS5250_SATA
115 tristate "Exynos5250 Sata SerDes/PHY driver"
116 depends on SOC_EXYNOS5250
124 Enable this to support SATA SerDes/Phy found on Samsung's
125 Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
126 SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
127 port to accept one SATA device.
129 config PHY_HIX5HD2_SATA
130 tristate "HIX5HD2 SATA PHY Driver"
131 depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
135 Support for SATA PHY on Hisilicon hix5hd2 Soc.
138 tristate "Allwinner sunxi SoC USB PHY driver"
139 depends on ARCH_SUNXI && HAS_IOMEM && OF
140 depends on RESET_CONTROLLER
143 Enable this to support the transceiver that is part of Allwinner
146 This driver controls the entire USB PHY block, both the USB OTG
147 parts, as well as the 2 regular USB 2 host PHYs.
149 config PHY_SAMSUNG_USB2
150 tristate "Samsung USB 2.0 PHY driver"
152 depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
157 Enable this to support the Samsung USB 2.0 PHY driver for Samsung
158 SoCs. This driver provides the interface for USB 2.0 PHY. Support
159 for particular PHYs will be enabled based on the SoC type in addition
162 config PHY_S5PV210_USB2
163 bool "Support for S5PV210"
164 depends on PHY_SAMSUNG_USB2
165 depends on ARCH_S5PV210
167 Enable USB PHY support for S5PV210. This option requires that Samsung
168 USB 2.0 PHY driver is enabled and means that support for this
169 particular SoC is compiled in the driver. In case of S5PV210 two phys
170 are available - device and host.
172 config PHY_EXYNOS4210_USB2
174 depends on PHY_SAMSUNG_USB2
175 default CPU_EXYNOS4210
177 config PHY_EXYNOS4X12_USB2
179 depends on PHY_SAMSUNG_USB2
180 default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
182 config PHY_EXYNOS5250_USB2
184 depends on PHY_SAMSUNG_USB2
185 default SOC_EXYNOS5250 || SOC_EXYNOS5420
187 config PHY_EXYNOS5_USBDRD
188 tristate "Exynos5 SoC series USB DRD PHY driver"
189 depends on ARCH_EXYNOS5 && OF
191 depends on USB_DWC3_EXYNOS
196 Enable USB DRD PHY support for Exynos 5 SoC series.
197 This driver provides PHY interface for USB 3.0 DRD controller
198 present on Exynos5 SoC series.
200 config PHY_QCOM_APQ8064_SATA
201 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
207 config PHY_QCOM_IPQ806X_SATA
208 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
214 config PHY_ST_SPEAR1310_MIPHY
215 tristate "ST SPEAR1310-MIPHY driver"
218 Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
220 config PHY_ST_SPEAR1340_MIPHY
221 tristate "ST SPEAR1340-MIPHY driver"
224 Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
227 tristate "APM X-Gene 15Gbps PHY support"
228 depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
231 This option enables support for APM X-Gene SoC multi-purpose PHY.