1 // SPDX-License-Identifier: GPL-2.0
3 * Implement cfg80211 ("iw") support.
5 * Copyright (C) 2009 M&N Solutions GmbH, 61191 Rosbach, Germany
6 * Holger Schurig <hs4233@mail.mn-solutions.de>
10 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
12 #include <linux/hardirq.h>
13 #include <linux/sched.h>
14 #include <linux/wait.h>
15 #include <linux/slab.h>
16 #include <linux/ieee80211.h>
17 #include <net/cfg80211.h>
18 #include <asm/unaligned.h>
26 #define CHAN2G(_channel, _freq, _flags) { \
27 .band = NL80211_BAND_2GHZ, \
28 .center_freq = (_freq), \
29 .hw_value = (_channel), \
31 .max_antenna_gain = 0, \
35 static struct ieee80211_channel lbs_2ghz_channels[] = {
52 #define RATETAB_ENT(_rate, _hw_value, _flags) { \
54 .hw_value = (_hw_value), \
59 /* Table 6 in section 3.2.1.1 */
60 static struct ieee80211_rate lbs_rates[] = {
61 RATETAB_ENT(10, 0, 0),
62 RATETAB_ENT(20, 1, 0),
63 RATETAB_ENT(55, 2, 0),
64 RATETAB_ENT(110, 3, 0),
65 RATETAB_ENT(60, 9, 0),
66 RATETAB_ENT(90, 6, 0),
67 RATETAB_ENT(120, 7, 0),
68 RATETAB_ENT(180, 8, 0),
69 RATETAB_ENT(240, 9, 0),
70 RATETAB_ENT(360, 10, 0),
71 RATETAB_ENT(480, 11, 0),
72 RATETAB_ENT(540, 12, 0),
75 static struct ieee80211_supported_band lbs_band_2ghz = {
76 .channels = lbs_2ghz_channels,
77 .n_channels = ARRAY_SIZE(lbs_2ghz_channels),
78 .bitrates = lbs_rates,
79 .n_bitrates = ARRAY_SIZE(lbs_rates),
83 static const u32 cipher_suites[] = {
84 WLAN_CIPHER_SUITE_WEP40,
85 WLAN_CIPHER_SUITE_WEP104,
86 WLAN_CIPHER_SUITE_TKIP,
87 WLAN_CIPHER_SUITE_CCMP,
90 /* Time to stay on the channel */
91 #define LBS_DWELL_PASSIVE 100
92 #define LBS_DWELL_ACTIVE 40
95 /***************************************************************************
96 * Misc utility functions
98 * TLVs are Marvell specific. They are very similar to IEs, they have the
99 * same structure: type, length, data*. The only difference: for IEs, the
100 * type and length are u8, but for TLVs they're __le16.
104 * Convert NL80211's auth_type to the one from Libertas, see chapter 5.9.1
105 * in the firmware spec
107 static int lbs_auth_to_authtype(enum nl80211_auth_type auth_type)
112 case NL80211_AUTHTYPE_OPEN_SYSTEM:
113 case NL80211_AUTHTYPE_SHARED_KEY:
116 case NL80211_AUTHTYPE_AUTOMATIC:
117 ret = NL80211_AUTHTYPE_OPEN_SYSTEM;
119 case NL80211_AUTHTYPE_NETWORK_EAP:
123 /* silence compiler */
131 * Various firmware commands need the list of supported rates, but with
132 * the hight-bit set for basic rates
134 static int lbs_add_rates(u8 *rates)
138 for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) {
139 u8 rate = lbs_rates[i].bitrate / 5;
140 if (rate == 0x02 || rate == 0x04 ||
141 rate == 0x0b || rate == 0x16)
145 return ARRAY_SIZE(lbs_rates);
149 /***************************************************************************
150 * TLV utility functions
152 * TLVs are Marvell specific. They are very similar to IEs, they have the
153 * same structure: type, length, data*. The only difference: for IEs, the
154 * type and length are u8, but for TLVs they're __le16.
161 #define LBS_MAX_SSID_TLV_SIZE \
162 (sizeof(struct mrvl_ie_header) \
163 + IEEE80211_MAX_SSID_LEN)
165 static int lbs_add_ssid_tlv(u8 *tlv, const u8 *ssid, int ssid_len)
167 struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv;
172 * ssid 4d 4e 54 45 53 54
174 ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID);
175 ssid_tlv->header.len = cpu_to_le16(ssid_len);
176 memcpy(ssid_tlv->ssid, ssid, ssid_len);
177 return sizeof(ssid_tlv->header) + ssid_len;
182 * Add channel list TLV (section 8.4.2)
184 * Actual channel data comes from priv->wdev->wiphy->channels.
186 #define LBS_MAX_CHANNEL_LIST_TLV_SIZE \
187 (sizeof(struct mrvl_ie_header) \
188 + (LBS_SCAN_BEFORE_NAP * sizeof(struct chanscanparamset)))
190 static int lbs_add_channel_list_tlv(struct lbs_private *priv, u8 *tlv,
191 int last_channel, int active_scan)
193 int chanscanparamsize = sizeof(struct chanscanparamset) *
194 (last_channel - priv->scan_channel);
196 struct mrvl_ie_header *header = (void *) tlv;
199 * TLV-ID CHANLIST 01 01
201 * channel 00 01 00 00 00 64 00
205 * min scan time 00 00
206 * max scan time 64 00
207 * channel 2 00 02 00 00 00 64 00
211 header->type = cpu_to_le16(TLV_TYPE_CHANLIST);
212 header->len = cpu_to_le16(chanscanparamsize);
213 tlv += sizeof(struct mrvl_ie_header);
215 /* lbs_deb_scan("scan: channels %d to %d\n", priv->scan_channel,
217 memset(tlv, 0, chanscanparamsize);
219 while (priv->scan_channel < last_channel) {
220 struct chanscanparamset *param = (void *) tlv;
222 param->radiotype = CMD_SCAN_RADIO_TYPE_BG;
224 priv->scan_req->channels[priv->scan_channel]->hw_value;
226 param->maxscantime = cpu_to_le16(LBS_DWELL_ACTIVE);
228 param->chanscanmode.passivescan = 1;
229 param->maxscantime = cpu_to_le16(LBS_DWELL_PASSIVE);
231 tlv += sizeof(struct chanscanparamset);
232 priv->scan_channel++;
234 return sizeof(struct mrvl_ie_header) + chanscanparamsize;
241 * The rates are in lbs_bg_rates[], but for the 802.11b
242 * rates the high bit is set. We add this TLV only because
243 * there's a firmware which otherwise doesn't report all
246 #define LBS_MAX_RATES_TLV_SIZE \
247 (sizeof(struct mrvl_ie_header) \
248 + (ARRAY_SIZE(lbs_rates)))
250 /* Adds a TLV with all rates the hardware supports */
251 static int lbs_add_supported_rates_tlv(u8 *tlv)
254 struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv;
259 * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c
261 rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES);
262 tlv += sizeof(rate_tlv->header);
263 i = lbs_add_rates(tlv);
265 rate_tlv->header.len = cpu_to_le16(i);
266 return sizeof(rate_tlv->header) + i;
269 /* Add common rates from a TLV and return the new end of the TLV */
271 add_ie_rates(u8 *tlv, const u8 *ie, int *nrates)
273 int hw, ap, ap_max = ie[1];
276 /* Advance past IE header */
279 lbs_deb_hex(LBS_DEB_ASSOC, "AP IE Rates", (u8 *) ie, ap_max);
281 for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) {
282 hw_rate = lbs_rates[hw].bitrate / 5;
283 for (ap = 0; ap < ap_max; ap++) {
284 if (hw_rate == (ie[ap] & 0x7f)) {
286 *nrates = *nrates + 1;
294 * Adds a TLV with all rates the hardware *and* BSS supports.
296 static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss)
298 struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv;
299 const u8 *rates_eid, *ext_rates_eid;
303 rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES);
304 ext_rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_EXT_SUPP_RATES);
307 * 01 00 TLV_TYPE_RATES
311 rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES);
312 tlv += sizeof(rate_tlv->header);
314 /* Add basic rates */
316 tlv = add_ie_rates(tlv, rates_eid, &n);
318 /* Add extended rates, if any */
320 tlv = add_ie_rates(tlv, ext_rates_eid, &n);
322 lbs_deb_assoc("assoc: bss had no basic rate IE\n");
323 /* Fallback: add basic 802.11b rates */
332 rate_tlv->header.len = cpu_to_le16(n);
333 return sizeof(rate_tlv->header) + n;
340 * This is only needed for newer firmware (V9 and up).
342 #define LBS_MAX_AUTH_TYPE_TLV_SIZE \
343 sizeof(struct mrvl_ie_auth_type)
345 static int lbs_add_auth_type_tlv(u8 *tlv, enum nl80211_auth_type auth_type)
347 struct mrvl_ie_auth_type *auth = (void *) tlv;
350 * 1f 01 TLV_TYPE_AUTH_TYPE
354 auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE);
355 auth->header.len = cpu_to_le16(sizeof(*auth)-sizeof(auth->header));
356 auth->auth = cpu_to_le16(lbs_auth_to_authtype(auth_type));
357 return sizeof(*auth);
362 * Add channel (phy ds) TLV
364 #define LBS_MAX_CHANNEL_TLV_SIZE \
365 sizeof(struct mrvl_ie_header)
367 static int lbs_add_channel_tlv(u8 *tlv, u8 channel)
369 struct mrvl_ie_ds_param_set *ds = (void *) tlv;
372 * 03 00 TLV_TYPE_PHY_DS
376 ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS);
377 ds->header.len = cpu_to_le16(sizeof(*ds)-sizeof(ds->header));
378 ds->channel = channel;
384 * Add (empty) CF param TLV of the form:
386 #define LBS_MAX_CF_PARAM_TLV_SIZE \
387 sizeof(struct mrvl_ie_header)
389 static int lbs_add_cf_param_tlv(u8 *tlv)
391 struct mrvl_ie_cf_param_set *cf = (void *)tlv;
398 * 00 00 cfpmaxduration
399 * 00 00 cfpdurationremaining
401 cf->header.type = cpu_to_le16(TLV_TYPE_CF);
402 cf->header.len = cpu_to_le16(sizeof(*cf)-sizeof(cf->header));
409 #define LBS_MAX_WPA_TLV_SIZE \
410 (sizeof(struct mrvl_ie_header) \
411 + 128 /* TODO: I guessed the size */)
413 static int lbs_add_wpa_tlv(u8 *tlv, const u8 *ie, u8 ie_len)
418 * We need just convert an IE to an TLV. IEs use u8 for the header,
422 * but TLVs use __le16 instead:
429 tlv_len = *tlv++ = *ie++;
433 /* the TLV is two bytes larger than the IE */
441 static int lbs_cfg_set_monitor_channel(struct wiphy *wiphy,
442 struct cfg80211_chan_def *chandef)
444 struct lbs_private *priv = wiphy_priv(wiphy);
447 if (cfg80211_get_chandef_type(chandef) != NL80211_CHAN_NO_HT)
450 ret = lbs_set_channel(priv, chandef->chan->hw_value);
456 static int lbs_cfg_set_mesh_channel(struct wiphy *wiphy,
457 struct net_device *netdev,
458 struct ieee80211_channel *channel)
460 struct lbs_private *priv = wiphy_priv(wiphy);
463 if (netdev != priv->mesh_dev)
466 ret = lbs_mesh_set_channel(priv, channel->hw_value);
479 * When scanning, the firmware doesn't send a nul packet with the power-safe
480 * bit to the AP. So we cannot stay away from our current channel too long,
481 * otherwise we loose data. So take a "nap" while scanning every other
484 #define LBS_SCAN_BEFORE_NAP 4
488 * When the firmware reports back a scan-result, it gives us an "u8 rssi",
489 * which isn't really an RSSI, as it becomes larger when moving away from
490 * the AP. Anyway, we need to convert that into mBm.
492 #define LBS_SCAN_RSSI_TO_MBM(rssi) \
493 ((-(int)rssi + 3)*100)
495 static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy,
496 struct cmd_header *resp)
498 struct cfg80211_bss *bss;
499 struct cmd_ds_802_11_scan_rsp *scanresp = (void *)resp;
507 bsssize = get_unaligned_le16(&scanresp->bssdescriptsize);
509 lbs_deb_scan("scan response: %d BSSs (%d bytes); resp size %d bytes\n",
510 scanresp->nr_sets, bsssize, le16_to_cpu(resp->size));
512 if (scanresp->nr_sets == 0) {
518 * The general layout of the scan response is described in chapter
519 * 5.7.1. Basically we have a common part, then any number of BSS
520 * descriptor sections. Finally we have section with the same number
523 * cmd_ds_802_11_scan_rsp
536 * MrvlIEtypes_TsfFimestamp_t
542 pos = scanresp->bssdesc_and_tlvbuffer;
544 lbs_deb_hex(LBS_DEB_SCAN, "SCAN_RSP", scanresp->bssdesc_and_tlvbuffer,
545 scanresp->bssdescriptsize);
547 tsfdesc = pos + bsssize;
548 tsfsize = 4 + 8 * scanresp->nr_sets;
549 lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TSF", (u8 *) tsfdesc, tsfsize);
551 /* Validity check: we expect a Marvell-Local TLV */
552 i = get_unaligned_le16(tsfdesc);
554 if (i != TLV_TYPE_TSFTIMESTAMP) {
555 lbs_deb_scan("scan response: invalid TSF Timestamp %d\n", i);
560 * Validity check: the TLV holds TSF values with 8 bytes each, so
561 * the size in the TLV must match the nr_sets value
563 i = get_unaligned_le16(tsfdesc);
565 if (i / 8 != scanresp->nr_sets) {
566 lbs_deb_scan("scan response: invalid number of TSF timestamp "
567 "sets (expected %d got %d)\n", scanresp->nr_sets,
572 for (i = 0; i < scanresp->nr_sets; i++) {
581 const u8 *ssid = NULL;
584 int len = get_unaligned_le16(pos);
592 /* Packet time stamp */
594 /* Beacon interval */
595 intvl = get_unaligned_le16(pos);
598 capa = get_unaligned_le16(pos);
601 /* To find out the channel, we must parse the IEs */
604 * 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon
605 * interval, capabilities
607 ielen = left = len - (6 + 1 + 8 + 2 + 2);
614 lbs_deb_scan("scan response: invalid IE fmt\n");
618 if (id == WLAN_EID_DS_PARAMS)
620 if (id == WLAN_EID_SSID) {
628 /* No channel, no luck */
630 struct wiphy *wiphy = priv->wdev->wiphy;
631 int freq = ieee80211_channel_to_frequency(chan_no,
633 struct ieee80211_channel *channel =
634 ieee80211_get_channel(wiphy, freq);
636 lbs_deb_scan("scan: %pM, capa %04x, chan %2d, %*pE, %d dBm\n",
637 bssid, capa, chan_no, ssid_len, ssid,
638 LBS_SCAN_RSSI_TO_MBM(rssi)/100);
641 !(channel->flags & IEEE80211_CHAN_DISABLED)) {
642 bss = cfg80211_inform_bss(wiphy, channel,
643 CFG80211_BSS_FTYPE_UNKNOWN,
644 bssid, get_unaligned_le64(tsfdesc),
645 capa, intvl, ie, ielen,
646 LBS_SCAN_RSSI_TO_MBM(rssi),
648 cfg80211_put_bss(wiphy, bss);
651 lbs_deb_scan("scan response: missing BSS channel IE\n");
663 * Our scan command contains a TLV, consting of a SSID TLV, a channel list
664 * TLV and a rates TLV. Determine the maximum size of them:
666 #define LBS_SCAN_MAX_CMD_SIZE \
667 (sizeof(struct cmd_ds_802_11_scan) \
668 + LBS_MAX_SSID_TLV_SIZE \
669 + LBS_MAX_CHANNEL_LIST_TLV_SIZE \
670 + LBS_MAX_RATES_TLV_SIZE)
673 * Assumes priv->scan_req is initialized and valid
674 * Assumes priv->scan_channel is initialized
676 static void lbs_scan_worker(struct work_struct *work)
678 struct lbs_private *priv =
679 container_of(work, struct lbs_private, scan_work.work);
680 struct cmd_ds_802_11_scan *scan_cmd;
681 u8 *tlv; /* pointer into our current, growing TLV storage area */
683 int running, carrier;
685 scan_cmd = kzalloc(LBS_SCAN_MAX_CMD_SIZE, GFP_KERNEL);
686 if (scan_cmd == NULL)
689 /* prepare fixed part of scan command */
690 scan_cmd->bsstype = CMD_BSS_TYPE_ANY;
692 /* stop network while we're away from our main channel */
693 running = !netif_queue_stopped(priv->dev);
694 carrier = netif_carrier_ok(priv->dev);
696 netif_stop_queue(priv->dev);
698 netif_carrier_off(priv->dev);
700 /* prepare fixed part of scan command */
701 tlv = scan_cmd->tlvbuffer;
704 if (priv->scan_req->n_ssids && priv->scan_req->ssids[0].ssid_len > 0)
705 tlv += lbs_add_ssid_tlv(tlv,
706 priv->scan_req->ssids[0].ssid,
707 priv->scan_req->ssids[0].ssid_len);
709 /* add channel TLVs */
710 last_channel = priv->scan_channel + LBS_SCAN_BEFORE_NAP;
711 if (last_channel > priv->scan_req->n_channels)
712 last_channel = priv->scan_req->n_channels;
713 tlv += lbs_add_channel_list_tlv(priv, tlv, last_channel,
714 priv->scan_req->n_ssids);
717 tlv += lbs_add_supported_rates_tlv(tlv);
719 if (priv->scan_channel < priv->scan_req->n_channels) {
720 cancel_delayed_work(&priv->scan_work);
721 if (netif_running(priv->dev))
722 queue_delayed_work(priv->work_thread, &priv->scan_work,
723 msecs_to_jiffies(300));
726 /* This is the final data we are about to send */
727 scan_cmd->hdr.size = cpu_to_le16(tlv - (u8 *)scan_cmd);
728 lbs_deb_hex(LBS_DEB_SCAN, "SCAN_CMD", (void *)scan_cmd,
730 lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TLV", scan_cmd->tlvbuffer,
731 tlv - scan_cmd->tlvbuffer);
733 __lbs_cmd(priv, CMD_802_11_SCAN, &scan_cmd->hdr,
734 le16_to_cpu(scan_cmd->hdr.size),
737 if (priv->scan_channel >= priv->scan_req->n_channels) {
739 cancel_delayed_work(&priv->scan_work);
743 /* Restart network */
745 netif_carrier_on(priv->dev);
746 if (running && !priv->tx_pending_len)
747 netif_wake_queue(priv->dev);
751 /* Wake up anything waiting on scan completion */
752 if (priv->scan_req == NULL) {
753 lbs_deb_scan("scan: waking up waiters\n");
754 wake_up_all(&priv->scan_q);
758 static void _internal_start_scan(struct lbs_private *priv, bool internal,
759 struct cfg80211_scan_request *request)
761 lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n",
762 request->n_ssids, request->n_channels, request->ie_len);
764 priv->scan_channel = 0;
765 priv->scan_req = request;
766 priv->internal_scan = internal;
768 queue_delayed_work(priv->work_thread, &priv->scan_work,
769 msecs_to_jiffies(50));
773 * Clean up priv->scan_req. Should be used to handle the allocation details.
775 void lbs_scan_done(struct lbs_private *priv)
777 WARN_ON(!priv->scan_req);
779 if (priv->internal_scan) {
780 kfree(priv->scan_req);
782 struct cfg80211_scan_info info = {
786 cfg80211_scan_done(priv->scan_req, &info);
789 priv->scan_req = NULL;
792 static int lbs_cfg_scan(struct wiphy *wiphy,
793 struct cfg80211_scan_request *request)
795 struct lbs_private *priv = wiphy_priv(wiphy);
798 if (priv->scan_req || delayed_work_pending(&priv->scan_work)) {
799 /* old scan request not yet processed */
804 _internal_start_scan(priv, false, request);
806 if (priv->surpriseremoved)
820 void lbs_send_disconnect_notification(struct lbs_private *priv,
821 bool locally_generated)
823 cfg80211_disconnected(priv->dev, 0, NULL, 0, locally_generated,
827 void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event)
829 cfg80211_michael_mic_failure(priv->dev,
831 event == MACREG_INT_CODE_MIC_ERR_MULTICAST ?
832 NL80211_KEYTYPE_GROUP :
833 NL80211_KEYTYPE_PAIRWISE,
848 * This removes all WEP keys
850 static int lbs_remove_wep_keys(struct lbs_private *priv)
852 struct cmd_ds_802_11_set_wep cmd;
855 memset(&cmd, 0, sizeof(cmd));
856 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
857 cmd.keyindex = cpu_to_le16(priv->wep_tx_key);
858 cmd.action = cpu_to_le16(CMD_ACT_REMOVE);
860 ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd);
868 static int lbs_set_wep_keys(struct lbs_private *priv)
870 struct cmd_ds_802_11_set_wep cmd;
879 * action 02 00 ACT_ADD
881 * type for key 1 01 WEP40
885 * key 1 39 39 39 39 39 00 00 00
886 * 00 00 00 00 00 00 00 00
887 * key 2 00 00 00 00 00 00 00 00
888 * 00 00 00 00 00 00 00 00
889 * key 3 00 00 00 00 00 00 00 00
890 * 00 00 00 00 00 00 00 00
891 * key 4 00 00 00 00 00 00 00 00
893 if (priv->wep_key_len[0] || priv->wep_key_len[1] ||
894 priv->wep_key_len[2] || priv->wep_key_len[3]) {
895 /* Only set wep keys if we have at least one of them */
896 memset(&cmd, 0, sizeof(cmd));
897 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
898 cmd.keyindex = cpu_to_le16(priv->wep_tx_key);
899 cmd.action = cpu_to_le16(CMD_ACT_ADD);
901 for (i = 0; i < 4; i++) {
902 switch (priv->wep_key_len[i]) {
903 case WLAN_KEY_LEN_WEP40:
904 cmd.keytype[i] = CMD_TYPE_WEP_40_BIT;
906 case WLAN_KEY_LEN_WEP104:
907 cmd.keytype[i] = CMD_TYPE_WEP_104_BIT;
913 memcpy(cmd.keymaterial[i], priv->wep_key[i],
914 priv->wep_key_len[i]);
917 ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd);
919 /* Otherwise remove all wep keys */
920 ret = lbs_remove_wep_keys(priv);
928 * Enable/Disable RSN status
930 static int lbs_enable_rsn(struct lbs_private *priv, int enable)
932 struct cmd_ds_802_11_enable_rsn cmd;
940 * action 01 00 ACT_SET
943 memset(&cmd, 0, sizeof(cmd));
944 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
945 cmd.action = cpu_to_le16(CMD_ACT_SET);
946 cmd.enable = cpu_to_le16(enable);
948 ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd);
955 * Set WPA/WPA key material
959 * like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we
960 * get rid of WEXT, this should go into host.h
963 struct cmd_key_material {
964 struct cmd_header hdr;
967 struct MrvlIEtype_keyParamSet param;
970 static int lbs_set_key_material(struct lbs_private *priv,
971 int key_type, int key_info,
972 const u8 *key, u16 key_len)
974 struct cmd_key_material cmd;
978 * Example for WPA (TKIP):
985 * TLV type 00 01 key param
987 * key type 01 00 TKIP
988 * key info 06 00 UNICAST | ENABLED
992 memset(&cmd, 0, sizeof(cmd));
993 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
994 cmd.action = cpu_to_le16(CMD_ACT_SET);
995 cmd.param.type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL);
996 cmd.param.length = cpu_to_le16(sizeof(cmd.param) - 4);
997 cmd.param.keytypeid = cpu_to_le16(key_type);
998 cmd.param.keyinfo = cpu_to_le16(key_info);
999 cmd.param.keylen = cpu_to_le16(key_len);
1001 memcpy(cmd.param.key, key, key_len);
1003 ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd);
1010 * Sets the auth type (open, shared, etc) in the firmware. That
1011 * we use CMD_802_11_AUTHENTICATE is misleading, this firmware
1012 * command doesn't send an authentication frame at all, it just
1013 * stores the auth_type.
1015 static int lbs_set_authtype(struct lbs_private *priv,
1016 struct cfg80211_connect_params *sme)
1018 struct cmd_ds_802_11_authenticate cmd;
1026 * BSS id 00 13 19 80 da 30
1028 * reserved 00 00 00 00 00 00 00 00 00 00
1030 memset(&cmd, 0, sizeof(cmd));
1031 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1033 memcpy(cmd.bssid, sme->bssid, ETH_ALEN);
1034 /* convert auth_type */
1035 ret = lbs_auth_to_authtype(sme->auth_type);
1040 ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd);
1048 * Create association request
1050 #define LBS_ASSOC_MAX_CMD_SIZE \
1051 (sizeof(struct cmd_ds_802_11_associate) \
1052 - 512 /* cmd_ds_802_11_associate.iebuf */ \
1053 + LBS_MAX_SSID_TLV_SIZE \
1054 + LBS_MAX_CHANNEL_TLV_SIZE \
1055 + LBS_MAX_CF_PARAM_TLV_SIZE \
1056 + LBS_MAX_AUTH_TYPE_TLV_SIZE \
1057 + LBS_MAX_WPA_TLV_SIZE)
1059 static int lbs_associate(struct lbs_private *priv,
1060 struct cfg80211_bss *bss,
1061 struct cfg80211_connect_params *sme)
1063 struct cmd_ds_802_11_associate_response *resp;
1064 struct cmd_ds_802_11_associate *cmd = kzalloc(LBS_ASSOC_MAX_CMD_SIZE,
1067 size_t len, resp_ie_len;
1077 pos = &cmd->iebuf[0];
1084 * BSS id 00 13 19 80 da 30
1085 * capabilities 11 00
1086 * listen interval 0a 00
1087 * beacon interval 00 00
1089 * TLVs xx (up to 512 bytes)
1091 cmd->hdr.command = cpu_to_le16(CMD_802_11_ASSOCIATE);
1093 /* Fill in static fields */
1094 memcpy(cmd->bssid, bss->bssid, ETH_ALEN);
1095 cmd->listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL);
1096 cmd->capability = cpu_to_le16(bss->capability);
1100 ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID);
1102 pos += lbs_add_ssid_tlv(pos, ssid_eid + 2, ssid_eid[1]);
1104 lbs_deb_assoc("no SSID\n");
1107 /* add DS param TLV */
1109 pos += lbs_add_channel_tlv(pos, bss->channel->hw_value);
1111 lbs_deb_assoc("no channel\n");
1113 /* add (empty) CF param TLV */
1114 pos += lbs_add_cf_param_tlv(pos);
1117 tmp = pos + 4; /* skip Marvell IE header */
1118 pos += lbs_add_common_rates_tlv(pos, bss);
1119 lbs_deb_hex(LBS_DEB_ASSOC, "Common Rates", tmp, pos - tmp);
1121 /* add auth type TLV */
1122 if (MRVL_FW_MAJOR_REV(priv->fwrelease) >= 9)
1123 pos += lbs_add_auth_type_tlv(pos, sme->auth_type);
1125 /* add WPA/WPA2 TLV */
1126 if (sme->ie && sme->ie_len)
1127 pos += lbs_add_wpa_tlv(pos, sme->ie, sme->ie_len);
1129 len = (sizeof(*cmd) - sizeof(cmd->iebuf)) +
1130 (u16)(pos - (u8 *) &cmd->iebuf);
1131 cmd->hdr.size = cpu_to_le16(len);
1133 lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_CMD", (u8 *) cmd,
1134 le16_to_cpu(cmd->hdr.size));
1136 /* store for later use */
1137 memcpy(priv->assoc_bss, bss->bssid, ETH_ALEN);
1139 ret = lbs_cmd_with_response(priv, CMD_802_11_ASSOCIATE, cmd);
1143 /* generate connect message to cfg80211 */
1145 resp = (void *) cmd; /* recast for easier field access */
1146 status = le16_to_cpu(resp->statuscode);
1148 /* Older FW versions map the IEEE 802.11 Status Code in the association
1149 * response to the following values returned in resp->statuscode:
1151 * IEEE Status Code Marvell Status Code
1152 * 0 -> 0x0000 ASSOC_RESULT_SUCCESS
1153 * 13 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED
1154 * 14 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED
1155 * 15 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED
1156 * 16 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED
1157 * others -> 0x0003 ASSOC_RESULT_REFUSED
1159 * Other response codes:
1160 * 0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused)
1161 * 0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for
1162 * association response from the AP)
1164 if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) {
1169 lbs_deb_assoc("invalid association parameters\n");
1170 status = WLAN_STATUS_CAPS_UNSUPPORTED;
1173 lbs_deb_assoc("timer expired while waiting for AP\n");
1174 status = WLAN_STATUS_AUTH_TIMEOUT;
1177 lbs_deb_assoc("association refused by AP\n");
1178 status = WLAN_STATUS_ASSOC_DENIED_UNSPEC;
1181 lbs_deb_assoc("authentication refused by AP\n");
1182 status = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION;
1185 lbs_deb_assoc("association failure %d\n", status);
1186 /* v5 OLPC firmware does return the AP status code if
1187 * it's not one of the values above. Let that through.
1193 lbs_deb_assoc("status %d, statuscode 0x%04x, capability 0x%04x, "
1194 "aid 0x%04x\n", status, le16_to_cpu(resp->statuscode),
1195 le16_to_cpu(resp->capability), le16_to_cpu(resp->aid));
1197 resp_ie_len = le16_to_cpu(resp->hdr.size)
1200 cfg80211_connect_result(priv->dev,
1202 sme->ie, sme->ie_len,
1203 resp->iebuf, resp_ie_len,
1208 /* TODO: get rid of priv->connect_status */
1209 priv->connect_status = LBS_CONNECTED;
1210 netif_carrier_on(priv->dev);
1211 if (!priv->tx_pending_len)
1212 netif_tx_wake_all_queues(priv->dev);
1220 static struct cfg80211_scan_request *
1221 _new_connect_scan_req(struct wiphy *wiphy, struct cfg80211_connect_params *sme)
1223 struct cfg80211_scan_request *creq = NULL;
1224 int i, n_channels = ieee80211_get_num_supported_channels(wiphy);
1225 enum nl80211_band band;
1227 creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) +
1228 n_channels * sizeof(void *),
1233 /* SSIDs come after channels */
1234 creq->ssids = (void *)&creq->channels[n_channels];
1235 creq->n_channels = n_channels;
1238 /* Scan all available channels */
1240 for (band = 0; band < NUM_NL80211_BANDS; band++) {
1243 if (!wiphy->bands[band])
1246 for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
1247 /* ignore disabled channels */
1248 if (wiphy->bands[band]->channels[j].flags &
1249 IEEE80211_CHAN_DISABLED)
1252 creq->channels[i] = &wiphy->bands[band]->channels[j];
1257 /* Set real number of channels specified in creq->channels[] */
1258 creq->n_channels = i;
1260 /* Scan for the SSID we're going to connect to */
1261 memcpy(creq->ssids[0].ssid, sme->ssid, sme->ssid_len);
1262 creq->ssids[0].ssid_len = sme->ssid_len;
1264 /* No channels found... */
1272 static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
1273 struct cfg80211_connect_params *sme)
1275 struct lbs_private *priv = wiphy_priv(wiphy);
1276 struct cfg80211_bss *bss = NULL;
1278 u8 preamble = RADIO_PREAMBLE_SHORT;
1280 if (dev == priv->mesh_dev)
1284 struct cfg80211_scan_request *creq;
1287 * Scan for the requested network after waiting for existing
1290 lbs_deb_assoc("assoc: waiting for existing scans\n");
1291 wait_event_interruptible_timeout(priv->scan_q,
1292 (priv->scan_req == NULL),
1295 creq = _new_connect_scan_req(wiphy, sme);
1301 lbs_deb_assoc("assoc: scanning for compatible AP\n");
1302 _internal_start_scan(priv, true, creq);
1304 lbs_deb_assoc("assoc: waiting for scan to complete\n");
1305 wait_event_interruptible_timeout(priv->scan_q,
1306 (priv->scan_req == NULL),
1308 lbs_deb_assoc("assoc: scanning completed\n");
1311 /* Find the BSS we want using available scan results */
1312 bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
1313 sme->ssid, sme->ssid_len, IEEE80211_BSS_TYPE_ESS,
1314 IEEE80211_PRIVACY_ANY);
1316 wiphy_err(wiphy, "assoc: bss %pM not in scan results\n",
1321 lbs_deb_assoc("trying %pM\n", bss->bssid);
1322 lbs_deb_assoc("cipher 0x%x, key index %d, key len %d\n",
1323 sme->crypto.cipher_group,
1324 sme->key_idx, sme->key_len);
1326 /* As this is a new connection, clear locally stored WEP keys */
1327 priv->wep_tx_key = 0;
1328 memset(priv->wep_key, 0, sizeof(priv->wep_key));
1329 memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len));
1331 /* set/remove WEP keys */
1332 switch (sme->crypto.cipher_group) {
1333 case WLAN_CIPHER_SUITE_WEP40:
1334 case WLAN_CIPHER_SUITE_WEP104:
1335 /* Store provided WEP keys in priv-> */
1336 priv->wep_tx_key = sme->key_idx;
1337 priv->wep_key_len[sme->key_idx] = sme->key_len;
1338 memcpy(priv->wep_key[sme->key_idx], sme->key, sme->key_len);
1339 /* Set WEP keys and WEP mode */
1340 lbs_set_wep_keys(priv);
1341 priv->mac_control |= CMD_ACT_MAC_WEP_ENABLE;
1342 lbs_set_mac_control(priv);
1343 /* No RSN mode for WEP */
1344 lbs_enable_rsn(priv, 0);
1346 case 0: /* there's no WLAN_CIPHER_SUITE_NONE definition */
1348 * If we don't have no WEP, no WPA and no WPA2,
1349 * we remove all keys like in the WPA/WPA2 setup,
1350 * we just don't set RSN.
1352 * Therefore: fall-through
1354 case WLAN_CIPHER_SUITE_TKIP:
1355 case WLAN_CIPHER_SUITE_CCMP:
1356 /* Remove WEP keys and WEP mode */
1357 lbs_remove_wep_keys(priv);
1358 priv->mac_control &= ~CMD_ACT_MAC_WEP_ENABLE;
1359 lbs_set_mac_control(priv);
1361 /* clear the WPA/WPA2 keys */
1362 lbs_set_key_material(priv,
1363 KEY_TYPE_ID_WEP, /* doesn't matter */
1364 KEY_INFO_WPA_UNICAST,
1366 lbs_set_key_material(priv,
1367 KEY_TYPE_ID_WEP, /* doesn't matter */
1370 /* RSN mode for WPA/WPA2 */
1371 lbs_enable_rsn(priv, sme->crypto.cipher_group != 0);
1374 wiphy_err(wiphy, "unsupported cipher group 0x%x\n",
1375 sme->crypto.cipher_group);
1380 ret = lbs_set_authtype(priv, sme);
1381 if (ret == -ENOTSUPP) {
1382 wiphy_err(wiphy, "unsupported authtype 0x%x\n", sme->auth_type);
1386 lbs_set_radio(priv, preamble, 1);
1388 /* Do the actual association */
1389 ret = lbs_associate(priv, bss, sme);
1393 cfg80211_put_bss(wiphy, bss);
1397 int lbs_disconnect(struct lbs_private *priv, u16 reason)
1399 struct cmd_ds_802_11_deauthenticate cmd;
1402 memset(&cmd, 0, sizeof(cmd));
1403 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1404 /* Mildly ugly to use a locally store my own BSSID ... */
1405 memcpy(cmd.macaddr, &priv->assoc_bss, ETH_ALEN);
1406 cmd.reasoncode = cpu_to_le16(reason);
1408 ret = lbs_cmd_with_response(priv, CMD_802_11_DEAUTHENTICATE, &cmd);
1412 cfg80211_disconnected(priv->dev,
1416 priv->connect_status = LBS_DISCONNECTED;
1421 static int lbs_cfg_disconnect(struct wiphy *wiphy, struct net_device *dev,
1424 struct lbs_private *priv = wiphy_priv(wiphy);
1426 if (dev == priv->mesh_dev)
1429 /* store for lbs_cfg_ret_disconnect() */
1430 priv->disassoc_reason = reason_code;
1432 return lbs_disconnect(priv, reason_code);
1435 static int lbs_cfg_set_default_key(struct wiphy *wiphy,
1436 struct net_device *netdev,
1437 u8 key_index, bool unicast,
1440 struct lbs_private *priv = wiphy_priv(wiphy);
1442 if (netdev == priv->mesh_dev)
1445 if (key_index != priv->wep_tx_key) {
1446 lbs_deb_assoc("set_default_key: to %d\n", key_index);
1447 priv->wep_tx_key = key_index;
1448 lbs_set_wep_keys(priv);
1455 static int lbs_cfg_add_key(struct wiphy *wiphy, struct net_device *netdev,
1456 u8 idx, bool pairwise, const u8 *mac_addr,
1457 struct key_params *params)
1459 struct lbs_private *priv = wiphy_priv(wiphy);
1464 if (netdev == priv->mesh_dev)
1467 lbs_deb_assoc("add_key: cipher 0x%x, mac_addr %pM\n",
1468 params->cipher, mac_addr);
1469 lbs_deb_assoc("add_key: key index %d, key len %d\n",
1470 idx, params->key_len);
1471 if (params->key_len)
1472 lbs_deb_hex(LBS_DEB_CFG80211, "KEY",
1473 params->key, params->key_len);
1475 lbs_deb_assoc("add_key: seq len %d\n", params->seq_len);
1476 if (params->seq_len)
1477 lbs_deb_hex(LBS_DEB_CFG80211, "SEQ",
1478 params->seq, params->seq_len);
1480 switch (params->cipher) {
1481 case WLAN_CIPHER_SUITE_WEP40:
1482 case WLAN_CIPHER_SUITE_WEP104:
1483 /* actually compare if something has changed ... */
1484 if ((priv->wep_key_len[idx] != params->key_len) ||
1485 memcmp(priv->wep_key[idx],
1486 params->key, params->key_len) != 0) {
1487 priv->wep_key_len[idx] = params->key_len;
1488 memcpy(priv->wep_key[idx],
1489 params->key, params->key_len);
1490 lbs_set_wep_keys(priv);
1493 case WLAN_CIPHER_SUITE_TKIP:
1494 case WLAN_CIPHER_SUITE_CCMP:
1495 key_info = KEY_INFO_WPA_ENABLED | ((idx == 0)
1496 ? KEY_INFO_WPA_UNICAST
1497 : KEY_INFO_WPA_MCAST);
1498 key_type = (params->cipher == WLAN_CIPHER_SUITE_TKIP)
1501 lbs_set_key_material(priv,
1504 params->key, params->key_len);
1507 wiphy_err(wiphy, "unhandled cipher 0x%x\n", params->cipher);
1516 static int lbs_cfg_del_key(struct wiphy *wiphy, struct net_device *netdev,
1517 u8 key_index, bool pairwise, const u8 *mac_addr)
1520 lbs_deb_assoc("del_key: key_idx %d, mac_addr %pM\n",
1521 key_index, mac_addr);
1524 struct lbs_private *priv = wiphy_priv(wiphy);
1526 * I think can keep this a NO-OP, because:
1528 * - we clear all keys whenever we do lbs_cfg_connect() anyway
1529 * - neither "iw" nor "wpa_supplicant" won't call this during
1530 * an ongoing connection
1531 * - TODO: but I have to check if this is still true when
1532 * I set the AP to periodic re-keying
1533 * - we've not kzallec() something when we've added a key at
1534 * lbs_cfg_connect() or lbs_cfg_add_key().
1536 * This causes lbs_cfg_del_key() only called at disconnect time,
1537 * where we'd just waste time deleting a key that is not going
1538 * to be used anyway.
1540 if (key_index < 3 && priv->wep_key_len[key_index]) {
1541 priv->wep_key_len[key_index] = 0;
1542 lbs_set_wep_keys(priv);
1554 static int lbs_cfg_get_station(struct wiphy *wiphy, struct net_device *dev,
1555 const u8 *mac, struct station_info *sinfo)
1557 struct lbs_private *priv = wiphy_priv(wiphy);
1562 sinfo->filled |= BIT(NL80211_STA_INFO_TX_BYTES) |
1563 BIT(NL80211_STA_INFO_TX_PACKETS) |
1564 BIT(NL80211_STA_INFO_RX_BYTES) |
1565 BIT(NL80211_STA_INFO_RX_PACKETS);
1566 sinfo->tx_bytes = priv->dev->stats.tx_bytes;
1567 sinfo->tx_packets = priv->dev->stats.tx_packets;
1568 sinfo->rx_bytes = priv->dev->stats.rx_bytes;
1569 sinfo->rx_packets = priv->dev->stats.rx_packets;
1571 /* Get current RSSI */
1572 ret = lbs_get_rssi(priv, &signal, &noise);
1574 sinfo->signal = signal;
1575 sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL);
1578 /* Convert priv->cur_rate from hw_value to NL80211 value */
1579 for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) {
1580 if (priv->cur_rate == lbs_rates[i].hw_value) {
1581 sinfo->txrate.legacy = lbs_rates[i].bitrate;
1582 sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE);
1597 static int lbs_change_intf(struct wiphy *wiphy, struct net_device *dev,
1598 enum nl80211_iftype type,
1599 struct vif_params *params)
1601 struct lbs_private *priv = wiphy_priv(wiphy);
1604 if (dev == priv->mesh_dev)
1608 case NL80211_IFTYPE_MONITOR:
1609 case NL80211_IFTYPE_STATION:
1610 case NL80211_IFTYPE_ADHOC:
1616 if (priv->iface_running)
1617 ret = lbs_set_iface_type(priv, type);
1620 priv->wdev->iftype = type;
1632 * The firmware needs the following bits masked out of the beacon-derived
1633 * capability field when associating/joining to a BSS:
1634 * 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused)
1636 #define CAPINFO_MASK (~(0xda00))
1639 static void lbs_join_post(struct lbs_private *priv,
1640 struct cfg80211_ibss_params *params,
1641 u8 *bssid, u16 capability)
1643 u8 fake_ie[2 + IEEE80211_MAX_SSID_LEN + /* ssid */
1644 2 + 4 + /* basic rates */
1645 2 + 1 + /* DS parameter */
1647 2 + 8]; /* extended rates */
1649 struct cfg80211_bss *bss;
1652 * For cfg80211_inform_bss, we'll need a fake IE, as we can't get
1653 * the real IE from the firmware. So we fabricate a fake IE based on
1654 * what the firmware actually sends (sniffed with wireshark).
1657 *fake++ = WLAN_EID_SSID;
1658 *fake++ = params->ssid_len;
1659 memcpy(fake, params->ssid, params->ssid_len);
1660 fake += params->ssid_len;
1661 /* Fake supported basic rates IE */
1662 *fake++ = WLAN_EID_SUPP_RATES;
1668 /* Fake DS channel IE */
1669 *fake++ = WLAN_EID_DS_PARAMS;
1671 *fake++ = params->chandef.chan->hw_value;
1672 /* Fake IBSS params IE */
1673 *fake++ = WLAN_EID_IBSS_PARAMS;
1675 *fake++ = 0; /* ATIM=0 */
1677 /* Fake extended rates IE, TODO: don't add this for 802.11b only,
1678 * but I don't know how this could be checked */
1679 *fake++ = WLAN_EID_EXT_SUPP_RATES;
1689 lbs_deb_hex(LBS_DEB_CFG80211, "IE", fake_ie, fake - fake_ie);
1691 bss = cfg80211_inform_bss(priv->wdev->wiphy,
1692 params->chandef.chan,
1693 CFG80211_BSS_FTYPE_UNKNOWN,
1697 params->beacon_interval,
1698 fake_ie, fake - fake_ie,
1700 cfg80211_put_bss(priv->wdev->wiphy, bss);
1702 memcpy(priv->wdev->ssid, params->ssid, params->ssid_len);
1703 priv->wdev->ssid_len = params->ssid_len;
1705 cfg80211_ibss_joined(priv->dev, bssid, params->chandef.chan,
1708 /* TODO: consider doing this at MACREG_INT_CODE_LINK_SENSED time */
1709 priv->connect_status = LBS_CONNECTED;
1710 netif_carrier_on(priv->dev);
1711 if (!priv->tx_pending_len)
1712 netif_wake_queue(priv->dev);
1715 static int lbs_ibss_join_existing(struct lbs_private *priv,
1716 struct cfg80211_ibss_params *params,
1717 struct cfg80211_bss *bss)
1719 const u8 *rates_eid;
1720 struct cmd_ds_802_11_ad_hoc_join cmd;
1721 u8 preamble = RADIO_PREAMBLE_SHORT;
1724 /* TODO: set preamble based on scan result */
1725 ret = lbs_set_radio(priv, preamble, 1);
1730 * Example CMD_802_11_AD_HOC_JOIN command:
1732 * command 2c 00 CMD_802_11_AD_HOC_JOIN
1736 * bssid 02 27 27 97 2f 96
1737 * ssid 49 42 53 53 00 00 00 00
1738 * 00 00 00 00 00 00 00 00
1739 * 00 00 00 00 00 00 00 00
1740 * 00 00 00 00 00 00 00 00
1741 * type 02 CMD_BSS_TYPE_IBSS
1742 * beacon period 64 00
1744 * timestamp 00 00 00 00 00 00 00 00
1745 * localtime 00 00 00 00 00 00 00 00
1749 * reserveed 00 00 00 00
1752 * IE IBSS atim 00 00
1753 * reserved 00 00 00 00
1755 * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c 00
1756 * fail timeout ff 00
1759 memset(&cmd, 0, sizeof(cmd));
1760 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1762 memcpy(cmd.bss.bssid, bss->bssid, ETH_ALEN);
1763 memcpy(cmd.bss.ssid, params->ssid, params->ssid_len);
1764 cmd.bss.type = CMD_BSS_TYPE_IBSS;
1765 cmd.bss.beaconperiod = cpu_to_le16(params->beacon_interval);
1766 cmd.bss.ds.header.id = WLAN_EID_DS_PARAMS;
1767 cmd.bss.ds.header.len = 1;
1768 cmd.bss.ds.channel = params->chandef.chan->hw_value;
1769 cmd.bss.ibss.header.id = WLAN_EID_IBSS_PARAMS;
1770 cmd.bss.ibss.header.len = 2;
1771 cmd.bss.ibss.atimwindow = 0;
1772 cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK);
1774 /* set rates to the intersection of our rates and the rates in the
1777 rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES);
1779 lbs_add_rates(cmd.bss.rates);
1782 u8 rates_max = rates_eid[1];
1783 u8 *rates = cmd.bss.rates;
1784 for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) {
1785 u8 hw_rate = lbs_rates[hw].bitrate / 5;
1786 for (i = 0; i < rates_max; i++) {
1787 if (hw_rate == (rates_eid[i+2] & 0x7f)) {
1788 u8 rate = rates_eid[i+2];
1789 if (rate == 0x02 || rate == 0x04 ||
1790 rate == 0x0b || rate == 0x16)
1799 /* Only v8 and below support setting this */
1800 if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) {
1801 cmd.failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT);
1802 cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME);
1804 ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd);
1809 * This is a sample response to CMD_802_11_AD_HOC_JOIN:
1817 lbs_join_post(priv, params, bss->bssid, bss->capability);
1825 static int lbs_ibss_start_new(struct lbs_private *priv,
1826 struct cfg80211_ibss_params *params)
1828 struct cmd_ds_802_11_ad_hoc_start cmd;
1829 struct cmd_ds_802_11_ad_hoc_result *resp =
1830 (struct cmd_ds_802_11_ad_hoc_result *) &cmd;
1831 u8 preamble = RADIO_PREAMBLE_SHORT;
1835 ret = lbs_set_radio(priv, preamble, 1);
1840 * Example CMD_802_11_AD_HOC_START command:
1842 * command 2b 00 CMD_802_11_AD_HOC_START
1846 * ssid 54 45 53 54 00 00 00 00
1847 * 00 00 00 00 00 00 00 00
1848 * 00 00 00 00 00 00 00 00
1849 * 00 00 00 00 00 00 00 00
1851 * beacon period 64 00
1855 * IE IBSS atim 00 00
1856 * reserved 00 00 00 00
1860 * reserved 00 00 00 00
1863 * rates 82 84 8b 96 (basic rates with have bit 7 set)
1864 * 0c 12 18 24 30 48 60 6c
1867 memset(&cmd, 0, sizeof(cmd));
1868 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1869 memcpy(cmd.ssid, params->ssid, params->ssid_len);
1870 cmd.bsstype = CMD_BSS_TYPE_IBSS;
1871 cmd.beaconperiod = cpu_to_le16(params->beacon_interval);
1872 cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS;
1873 cmd.ibss.header.len = 2;
1874 cmd.ibss.atimwindow = 0;
1875 cmd.ds.header.id = WLAN_EID_DS_PARAMS;
1876 cmd.ds.header.len = 1;
1877 cmd.ds.channel = params->chandef.chan->hw_value;
1878 /* Only v8 and below support setting probe delay */
1879 if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8)
1880 cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME);
1881 /* TODO: mix in WLAN_CAPABILITY_PRIVACY */
1882 capability = WLAN_CAPABILITY_IBSS;
1883 cmd.capability = cpu_to_le16(capability);
1884 lbs_add_rates(cmd.rates);
1887 ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd);
1892 * This is a sample response to CMD_802_11_AD_HOC_JOIN:
1899 * bssid 02 2b 7b 0f 86 0e
1901 lbs_join_post(priv, params, resp->bssid, capability);
1908 static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev,
1909 struct cfg80211_ibss_params *params)
1911 struct lbs_private *priv = wiphy_priv(wiphy);
1913 struct cfg80211_bss *bss;
1915 if (dev == priv->mesh_dev)
1918 if (!params->chandef.chan) {
1923 ret = lbs_set_channel(priv, params->chandef.chan->hw_value);
1927 /* Search if someone is beaconing. This assumes that the
1928 * bss list is populated already */
1929 bss = cfg80211_get_bss(wiphy, params->chandef.chan, params->bssid,
1930 params->ssid, params->ssid_len,
1931 IEEE80211_BSS_TYPE_IBSS, IEEE80211_PRIVACY_ANY);
1934 ret = lbs_ibss_join_existing(priv, params, bss);
1935 cfg80211_put_bss(wiphy, bss);
1937 ret = lbs_ibss_start_new(priv, params);
1945 static int lbs_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
1947 struct lbs_private *priv = wiphy_priv(wiphy);
1948 struct cmd_ds_802_11_ad_hoc_stop cmd;
1951 if (dev == priv->mesh_dev)
1954 memset(&cmd, 0, sizeof(cmd));
1955 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1956 ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_STOP, &cmd);
1958 /* TODO: consider doing this at MACREG_INT_CODE_ADHOC_BCN_LOST time */
1959 lbs_mac_event_disconnected(priv, true);
1966 static int lbs_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
1967 bool enabled, int timeout)
1969 struct lbs_private *priv = wiphy_priv(wiphy);
1971 if (!(priv->fwcapinfo & FW_CAPINFO_PS)) {
1977 /* firmware does not work well with too long latency with power saving
1978 * enabled, so do not enable it if there is only polling, no
1979 * interrupts (like in some sdio hosts which can only
1980 * poll for sdio irqs)
1982 if (priv->is_polling) {
1989 priv->psmode = LBS802_11POWERMODECAM;
1990 if (priv->psstate != PS_STATE_FULL_POWER)
1991 lbs_set_ps_mode(priv,
1992 PS_MODE_ACTION_EXIT_PS,
1996 if (priv->psmode != LBS802_11POWERMODECAM)
1998 priv->psmode = LBS802_11POWERMODEMAX_PSP;
1999 if (priv->connect_status == LBS_CONNECTED)
2000 lbs_set_ps_mode(priv, PS_MODE_ACTION_ENTER_PS, true);
2008 static const struct cfg80211_ops lbs_cfg80211_ops = {
2009 .set_monitor_channel = lbs_cfg_set_monitor_channel,
2010 .libertas_set_mesh_channel = lbs_cfg_set_mesh_channel,
2011 .scan = lbs_cfg_scan,
2012 .connect = lbs_cfg_connect,
2013 .disconnect = lbs_cfg_disconnect,
2014 .add_key = lbs_cfg_add_key,
2015 .del_key = lbs_cfg_del_key,
2016 .set_default_key = lbs_cfg_set_default_key,
2017 .get_station = lbs_cfg_get_station,
2018 .change_virtual_intf = lbs_change_intf,
2019 .join_ibss = lbs_join_ibss,
2020 .leave_ibss = lbs_leave_ibss,
2021 .set_power_mgmt = lbs_set_power_mgmt,
2026 * At this time lbs_private *priv doesn't even exist, so we just allocate
2027 * memory and don't initialize the wiphy further. This is postponed until we
2028 * can talk to the firmware and happens at registration time in
2029 * lbs_cfg_wiphy_register().
2031 struct wireless_dev *lbs_cfg_alloc(struct device *dev)
2034 struct wireless_dev *wdev;
2036 wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
2038 return ERR_PTR(-ENOMEM);
2040 wdev->wiphy = wiphy_new(&lbs_cfg80211_ops, sizeof(struct lbs_private));
2042 dev_err(dev, "cannot allocate wiphy\n");
2051 return ERR_PTR(ret);
2055 static void lbs_cfg_set_regulatory_hint(struct lbs_private *priv)
2057 struct region_code_mapping {
2062 /* Section 5.17.2 */
2063 static const struct region_code_mapping regmap[] = {
2064 {"US ", 0x10}, /* US FCC */
2065 {"CA ", 0x20}, /* Canada */
2066 {"EU ", 0x30}, /* ETSI */
2067 {"ES ", 0x31}, /* Spain */
2068 {"FR ", 0x32}, /* France */
2069 {"JP ", 0x40}, /* Japan */
2073 for (i = 0; i < ARRAY_SIZE(regmap); i++)
2074 if (regmap[i].code == priv->regioncode) {
2075 regulatory_hint(priv->wdev->wiphy, regmap[i].cn);
2080 static void lbs_reg_notifier(struct wiphy *wiphy,
2081 struct regulatory_request *request)
2083 struct lbs_private *priv = wiphy_priv(wiphy);
2085 memcpy(priv->country_code, request->alpha2, sizeof(request->alpha2));
2086 if (lbs_iface_active(priv))
2087 lbs_set_11d_domain_info(priv);
2091 * This function get's called after lbs_setup_firmware() determined the
2092 * firmware capabities. So we can setup the wiphy according to our
2093 * hardware/firmware.
2095 int lbs_cfg_register(struct lbs_private *priv)
2097 struct wireless_dev *wdev = priv->wdev;
2100 wdev->wiphy->max_scan_ssids = 1;
2101 wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
2103 wdev->wiphy->interface_modes =
2104 BIT(NL80211_IFTYPE_STATION) |
2105 BIT(NL80211_IFTYPE_ADHOC);
2106 if (lbs_rtap_supported(priv))
2107 wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
2108 if (lbs_mesh_activated(priv))
2109 wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MESH_POINT);
2111 wdev->wiphy->bands[NL80211_BAND_2GHZ] = &lbs_band_2ghz;
2114 * We could check priv->fwcapinfo && FW_CAPINFO_WPA, but I have
2115 * never seen a firmware without WPA
2117 wdev->wiphy->cipher_suites = cipher_suites;
2118 wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
2119 wdev->wiphy->reg_notifier = lbs_reg_notifier;
2121 ret = wiphy_register(wdev->wiphy);
2123 pr_err("cannot register wiphy device\n");
2125 priv->wiphy_registered = true;
2127 ret = register_netdev(priv->dev);
2129 pr_err("cannot register network device\n");
2131 INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker);
2133 lbs_cfg_set_regulatory_hint(priv);
2138 void lbs_scan_deinit(struct lbs_private *priv)
2140 cancel_delayed_work_sync(&priv->scan_work);
2144 void lbs_cfg_free(struct lbs_private *priv)
2146 struct wireless_dev *wdev = priv->wdev;
2151 if (priv->wiphy_registered)
2152 wiphy_unregister(wdev->wiphy);
2155 wiphy_free(wdev->wiphy);