1 /******************************************************************************
3 * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
29 #include <linux/kernel.h>
30 #include <linux/module.h>
31 #include <linux/init.h>
32 #include <linux/slab.h>
33 #include <linux/delay.h>
34 #include <linux/sched.h>
35 #include <linux/skbuff.h>
36 #include <linux/netdevice.h>
37 #include <linux/firmware.h>
38 #include <linux/etherdevice.h>
39 #include <linux/if_arp.h>
41 #include <net/mac80211.h>
43 #include <asm/div64.h>
45 #include "iwl-eeprom.h"
50 #include "iwl-agn-calib.h"
52 #include "iwl-shared.h"
54 #include "iwl-trans.h"
56 /******************************************************************************
60 ******************************************************************************/
63 * module name, copyright, version, etc.
65 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
67 #ifdef CONFIG_IWLWIFI_DEBUG
73 #define DRV_VERSION IWLWIFI_VERSION VD
76 MODULE_DESCRIPTION(DRV_DESCRIPTION);
77 MODULE_VERSION(DRV_VERSION);
78 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
79 MODULE_LICENSE("GPL");
80 MODULE_ALIAS("iwlagn");
82 void iwl_update_chain_flags(struct iwl_priv *priv)
84 struct iwl_rxon_context *ctx;
86 for_each_context(priv, ctx) {
87 iwlagn_set_rxon_chain(priv, ctx);
88 if (ctx->active.rx_chain != ctx->staging.rx_chain)
89 iwlagn_commit_rxon(priv, ctx);
93 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
94 static void iwl_set_beacon_tim(struct iwl_priv *priv,
95 struct iwl_tx_beacon_cmd *tx_beacon_cmd,
96 u8 *beacon, u32 frame_size)
99 struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
102 * The index is relative to frame start but we start looking at the
103 * variable-length part of the beacon.
105 tim_idx = mgmt->u.beacon.variable - beacon;
107 /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
108 while ((tim_idx < (frame_size - 2)) &&
109 (beacon[tim_idx] != WLAN_EID_TIM))
110 tim_idx += beacon[tim_idx+1] + 2;
112 /* If TIM field was found, set variables */
113 if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
114 tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
115 tx_beacon_cmd->tim_size = beacon[tim_idx+1];
117 IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
120 int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
122 struct iwl_tx_beacon_cmd *tx_beacon_cmd;
123 struct iwl_host_cmd cmd = {
124 .id = REPLY_TX_BEACON,
127 struct ieee80211_tx_info *info;
133 * We have to set up the TX command, the TX Beacon command, and the
137 lockdep_assert_held(&priv->shrd->mutex);
139 if (!priv->beacon_ctx) {
140 IWL_ERR(priv, "trying to build beacon w/o beacon context!\n");
144 if (WARN_ON(!priv->beacon_skb))
147 /* Allocate beacon command */
148 if (!priv->beacon_cmd)
149 priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL);
150 tx_beacon_cmd = priv->beacon_cmd;
154 frame_size = priv->beacon_skb->len;
156 /* Set up TX command fields */
157 tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
158 tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id;
159 tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
160 tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
161 TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
163 /* Set up TX beacon command fields */
164 iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data,
167 /* Set up packet rate and flags */
168 info = IEEE80211_SKB_CB(priv->beacon_skb);
171 * Let's set up the rate at least somewhat correctly;
172 * it will currently not actually be used by the uCode,
173 * it uses the broadcast station's rate instead.
175 if (info->control.rates[0].idx < 0 ||
176 info->control.rates[0].flags & IEEE80211_TX_RC_MCS)
179 rate = info->control.rates[0].idx;
181 priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
182 hw_params(priv).valid_tx_ant);
183 rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
185 /* In mac80211, rates for 5 GHz start at 0 */
186 if (info->band == IEEE80211_BAND_5GHZ)
187 rate += IWL_FIRST_OFDM_RATE;
188 else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE)
189 rate_flags |= RATE_MCS_CCK_MSK;
191 tx_beacon_cmd->tx.rate_n_flags =
192 iwl_hw_set_rate_n_flags(rate, rate_flags);
195 cmd.len[0] = sizeof(*tx_beacon_cmd);
196 cmd.data[0] = tx_beacon_cmd;
197 cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
198 cmd.len[1] = frame_size;
199 cmd.data[1] = priv->beacon_skb->data;
200 cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY;
202 return iwl_trans_send_cmd(trans(priv), &cmd);
205 static void iwl_bg_beacon_update(struct work_struct *work)
207 struct iwl_priv *priv =
208 container_of(work, struct iwl_priv, beacon_update);
209 struct sk_buff *beacon;
211 mutex_lock(&priv->shrd->mutex);
212 if (!priv->beacon_ctx) {
213 IWL_ERR(priv, "updating beacon w/o beacon context!\n");
217 if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) {
219 * The ucode will send beacon notifications even in
220 * IBSS mode, but we don't want to process them. But
221 * we need to defer the type check to here due to
222 * requiring locking around the beacon_ctx access.
227 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
228 beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif);
230 IWL_ERR(priv, "update beacon failed -- keeping old\n");
234 /* new beacon skb is allocated every time; dispose previous.*/
235 dev_kfree_skb(priv->beacon_skb);
237 priv->beacon_skb = beacon;
239 iwlagn_send_beacon_cmd(priv);
241 mutex_unlock(&priv->shrd->mutex);
244 static void iwl_bg_bt_runtime_config(struct work_struct *work)
246 struct iwl_priv *priv =
247 container_of(work, struct iwl_priv, bt_runtime_config);
249 if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
252 /* dont send host command if rf-kill is on */
253 if (!iwl_is_ready_rf(priv->shrd))
255 iwlagn_send_advance_bt_config(priv);
258 static void iwl_bg_bt_full_concurrency(struct work_struct *work)
260 struct iwl_priv *priv =
261 container_of(work, struct iwl_priv, bt_full_concurrency);
262 struct iwl_rxon_context *ctx;
264 mutex_lock(&priv->shrd->mutex);
266 if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
269 /* dont send host command if rf-kill is on */
270 if (!iwl_is_ready_rf(priv->shrd))
273 IWL_DEBUG_INFO(priv, "BT coex in %s mode\n",
274 priv->bt_full_concurrent ?
275 "full concurrency" : "3-wire");
278 * LQ & RXON updated cmds must be sent before BT Config cmd
279 * to avoid 3-wire collisions
281 for_each_context(priv, ctx) {
282 iwlagn_set_rxon_chain(priv, ctx);
283 iwlagn_commit_rxon(priv, ctx);
286 iwlagn_send_advance_bt_config(priv);
288 mutex_unlock(&priv->shrd->mutex);
292 * iwl_bg_statistics_periodic - Timer callback to queue statistics
294 * This callback is provided in order to send a statistics request.
296 * This timer function is continually reset to execute within
297 * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
298 * was received. We need to ensure we receive the statistics in order
299 * to update the temperature used for calibrating the TXPOWER.
301 static void iwl_bg_statistics_periodic(unsigned long data)
303 struct iwl_priv *priv = (struct iwl_priv *)data;
305 if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
308 /* dont send host command if rf-kill is on */
309 if (!iwl_is_ready_rf(priv->shrd))
312 iwl_send_statistics_request(priv, CMD_ASYNC, false);
316 static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
317 u32 start_idx, u32 num_events,
318 u32 capacity, u32 mode)
321 u32 ptr; /* SRAM byte address of log data */
322 u32 ev, time, data; /* event log data */
323 unsigned long reg_flags;
326 ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
328 ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
330 /* Make sure device is powered up for SRAM reads */
331 spin_lock_irqsave(&trans(priv)->reg_lock, reg_flags);
332 if (iwl_grab_nic_access(trans(priv))) {
333 spin_unlock_irqrestore(&trans(priv)->reg_lock, reg_flags);
337 /* Set starting address; reads will auto-increment */
338 iwl_write32(trans(priv), HBUS_TARG_MEM_RADDR, ptr);
342 * Refuse to read more than would have fit into the log from
343 * the current start_idx. This used to happen due to the race
344 * described below, but now WARN because the code below should
345 * prevent it from happening here.
347 if (WARN_ON(num_events > capacity - start_idx))
348 num_events = capacity - start_idx;
351 * "time" is actually "data" for mode 0 (no timestamp).
352 * place event id # at far right for easier visual parsing.
354 for (i = 0; i < num_events; i++) {
355 ev = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT);
356 time = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT);
358 trace_iwlwifi_dev_ucode_cont_event(priv, 0, time, ev);
360 data = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT);
361 trace_iwlwifi_dev_ucode_cont_event(priv, time,
365 /* Allow device to power down */
366 iwl_release_nic_access(trans(priv));
367 spin_unlock_irqrestore(&trans(priv)->reg_lock, reg_flags);
370 static void iwl_continuous_event_trace(struct iwl_priv *priv)
372 u32 capacity; /* event log capacity in # entries */
379 u32 base; /* SRAM byte address of event log header */
380 u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
381 u32 num_wraps; /* # times uCode wrapped to top of log */
382 u32 next_entry; /* index of next entry to be written by uCode */
384 base = priv->shrd->device_pointers.log_event_table;
385 if (iwlagn_hw_valid_rtc_data_addr(base)) {
386 iwl_read_targ_mem_words(trans(priv), base, &read, sizeof(read));
388 capacity = read.capacity;
390 num_wraps = read.wrap_counter;
391 next_entry = read.write_counter;
396 * Unfortunately, the uCode doesn't use temporary variables.
397 * Therefore, it can happen that we read next_entry == capacity,
398 * which really means next_entry == 0.
400 if (unlikely(next_entry == capacity))
403 * Additionally, the uCode increases the write pointer before
404 * the wraps counter, so if the write pointer is smaller than
405 * the old write pointer (wrap occurred) but we read that no
406 * wrap occurred, we actually read between the next_entry and
407 * num_wraps update (this does happen in practice!!) -- take
408 * that into account by increasing num_wraps.
410 if (unlikely(next_entry < priv->event_log.next_entry &&
411 num_wraps == priv->event_log.num_wraps))
414 if (num_wraps == priv->event_log.num_wraps) {
415 iwl_print_cont_event_trace(
416 priv, base, priv->event_log.next_entry,
417 next_entry - priv->event_log.next_entry,
420 priv->event_log.non_wraps_count++;
422 if (num_wraps - priv->event_log.num_wraps > 1)
423 priv->event_log.wraps_more_count++;
425 priv->event_log.wraps_once_count++;
427 trace_iwlwifi_dev_ucode_wrap_event(priv,
428 num_wraps - priv->event_log.num_wraps,
429 next_entry, priv->event_log.next_entry);
431 if (next_entry < priv->event_log.next_entry) {
432 iwl_print_cont_event_trace(
433 priv, base, priv->event_log.next_entry,
434 capacity - priv->event_log.next_entry,
437 iwl_print_cont_event_trace(
438 priv, base, 0, next_entry, capacity, mode);
440 iwl_print_cont_event_trace(
441 priv, base, next_entry,
442 capacity - next_entry,
445 iwl_print_cont_event_trace(
446 priv, base, 0, next_entry, capacity, mode);
450 priv->event_log.num_wraps = num_wraps;
451 priv->event_log.next_entry = next_entry;
455 * iwl_bg_ucode_trace - Timer callback to log ucode event
457 * The timer is continually set to execute every
458 * UCODE_TRACE_PERIOD milliseconds after the last timer expired
459 * this function is to perform continuous uCode event logging operation
462 static void iwl_bg_ucode_trace(unsigned long data)
464 struct iwl_priv *priv = (struct iwl_priv *)data;
466 if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
469 if (priv->event_log.ucode_trace) {
470 iwl_continuous_event_trace(priv);
471 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
472 mod_timer(&priv->ucode_trace,
473 jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
477 static void iwl_bg_tx_flush(struct work_struct *work)
479 struct iwl_priv *priv =
480 container_of(work, struct iwl_priv, tx_flush);
482 if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
485 /* do nothing if rf-kill is on */
486 if (!iwl_is_ready_rf(priv->shrd))
489 IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n");
490 iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
493 static void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags)
498 * The default context is always valid,
499 * the PAN context depends on uCode.
501 priv->shrd->valid_contexts = BIT(IWL_RXON_CTX_BSS);
502 if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN)
503 priv->shrd->valid_contexts |= BIT(IWL_RXON_CTX_PAN);
505 for (i = 0; i < NUM_IWL_RXON_CTX; i++)
506 priv->contexts[i].ctxid = i;
508 priv->contexts[IWL_RXON_CTX_BSS].always_active = true;
509 priv->contexts[IWL_RXON_CTX_BSS].is_active = true;
510 priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
511 priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
512 priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
513 priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
514 priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
515 priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
516 priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes =
517 BIT(NL80211_IFTYPE_ADHOC);
518 priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
519 BIT(NL80211_IFTYPE_STATION);
520 priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP;
521 priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
522 priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
523 priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
525 priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON;
526 priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd =
527 REPLY_WIPAN_RXON_TIMING;
528 priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd =
529 REPLY_WIPAN_RXON_ASSOC;
530 priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM;
531 priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN;
532 priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY;
533 priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID;
534 priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION;
535 priv->contexts[IWL_RXON_CTX_PAN].interface_modes =
536 BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP);
538 if (ucode_flags & IWL_UCODE_TLV_FLAGS_P2P)
539 priv->contexts[IWL_RXON_CTX_PAN].interface_modes |=
540 BIT(NL80211_IFTYPE_P2P_CLIENT) |
541 BIT(NL80211_IFTYPE_P2P_GO);
543 priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP;
544 priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA;
545 priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P;
547 BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
550 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
552 #define UCODE_EXPERIMENTAL_INDEX 100
553 #define UCODE_EXPERIMENTAL_TAG "exp"
555 static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
557 const char *name_pre = cfg(priv)->fw_name_pre;
561 #ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
562 priv->fw_index = UCODE_EXPERIMENTAL_INDEX;
563 strcpy(tag, UCODE_EXPERIMENTAL_TAG);
564 } else if (priv->fw_index == UCODE_EXPERIMENTAL_INDEX) {
566 priv->fw_index = cfg(priv)->ucode_api_max;
567 sprintf(tag, "%d", priv->fw_index);
570 sprintf(tag, "%d", priv->fw_index);
573 if (priv->fw_index < cfg(priv)->ucode_api_min) {
574 IWL_ERR(priv, "no suitable firmware found!\n");
578 sprintf(priv->firmware_name, "%s%s%s", name_pre, tag, ".ucode");
580 IWL_DEBUG_INFO(priv, "attempting to load firmware %s'%s'\n",
581 (priv->fw_index == UCODE_EXPERIMENTAL_INDEX)
582 ? "EXPERIMENTAL " : "",
583 priv->firmware_name);
585 return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
587 GFP_KERNEL, priv, iwl_ucode_callback);
590 struct iwlagn_firmware_pieces {
591 const void *inst, *data, *init, *init_data, *wowlan_inst, *wowlan_data;
592 size_t inst_size, data_size, init_size, init_data_size,
593 wowlan_inst_size, wowlan_data_size;
597 u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
598 u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
601 static int iwlagn_load_legacy_firmware(struct iwl_priv *priv,
602 const struct firmware *ucode_raw,
603 struct iwlagn_firmware_pieces *pieces)
605 struct iwl_ucode_header *ucode = (void *)ucode_raw->data;
606 u32 api_ver, hdr_size;
609 priv->ucode_ver = le32_to_cpu(ucode->ver);
610 api_ver = IWL_UCODE_API(priv->ucode_ver);
615 if (ucode_raw->size < hdr_size) {
616 IWL_ERR(priv, "File size too small!\n");
619 pieces->build = le32_to_cpu(ucode->u.v2.build);
620 pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size);
621 pieces->data_size = le32_to_cpu(ucode->u.v2.data_size);
622 pieces->init_size = le32_to_cpu(ucode->u.v2.init_size);
623 pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size);
624 src = ucode->u.v2.data;
630 if (ucode_raw->size < hdr_size) {
631 IWL_ERR(priv, "File size too small!\n");
635 pieces->inst_size = le32_to_cpu(ucode->u.v1.inst_size);
636 pieces->data_size = le32_to_cpu(ucode->u.v1.data_size);
637 pieces->init_size = le32_to_cpu(ucode->u.v1.init_size);
638 pieces->init_data_size = le32_to_cpu(ucode->u.v1.init_data_size);
639 src = ucode->u.v1.data;
643 /* Verify size of file vs. image size info in file's header */
644 if (ucode_raw->size != hdr_size + pieces->inst_size +
645 pieces->data_size + pieces->init_size +
646 pieces->init_data_size) {
649 "uCode file size %d does not match expected size\n",
650 (int)ucode_raw->size);
655 src += pieces->inst_size;
657 src += pieces->data_size;
659 src += pieces->init_size;
660 pieces->init_data = src;
661 src += pieces->init_data_size;
666 static int iwlagn_load_firmware(struct iwl_priv *priv,
667 const struct firmware *ucode_raw,
668 struct iwlagn_firmware_pieces *pieces,
669 struct iwlagn_ucode_capabilities *capa)
671 struct iwl_tlv_ucode_header *ucode = (void *)ucode_raw->data;
672 struct iwl_ucode_tlv *tlv;
673 size_t len = ucode_raw->size;
675 int wanted_alternative = iwlagn_mod_params.wanted_ucode_alternative;
679 enum iwl_ucode_tlv_type tlv_type;
682 if (len < sizeof(*ucode)) {
683 IWL_ERR(priv, "uCode has invalid length: %zd\n", len);
687 if (ucode->magic != cpu_to_le32(IWL_TLV_UCODE_MAGIC)) {
688 IWL_ERR(priv, "invalid uCode magic: 0X%x\n",
689 le32_to_cpu(ucode->magic));
694 * Check which alternatives are present, and "downgrade"
695 * when the chosen alternative is not present, warning
696 * the user when that happens. Some files may not have
697 * any alternatives, so don't warn in that case.
699 alternatives = le64_to_cpu(ucode->alternatives);
700 tmp = wanted_alternative;
701 if (wanted_alternative > 63)
702 wanted_alternative = 63;
703 while (wanted_alternative && !(alternatives & BIT(wanted_alternative)))
704 wanted_alternative--;
705 if (wanted_alternative && wanted_alternative != tmp)
707 "uCode alternative %d not available, choosing %d\n",
708 tmp, wanted_alternative);
710 priv->ucode_ver = le32_to_cpu(ucode->ver);
711 pieces->build = le32_to_cpu(ucode->build);
714 len -= sizeof(*ucode);
716 while (len >= sizeof(*tlv)) {
722 tlv_len = le32_to_cpu(tlv->length);
723 tlv_type = le16_to_cpu(tlv->type);
724 tlv_alt = le16_to_cpu(tlv->alternative);
725 tlv_data = tlv->data;
728 IWL_ERR(priv, "invalid TLV len: %zd/%u\n",
732 len -= ALIGN(tlv_len, 4);
733 data += sizeof(*tlv) + ALIGN(tlv_len, 4);
736 * Alternative 0 is always valid.
738 * Skip alternative TLVs that are not selected.
740 if (tlv_alt != 0 && tlv_alt != wanted_alternative)
744 case IWL_UCODE_TLV_INST:
745 pieces->inst = tlv_data;
746 pieces->inst_size = tlv_len;
748 case IWL_UCODE_TLV_DATA:
749 pieces->data = tlv_data;
750 pieces->data_size = tlv_len;
752 case IWL_UCODE_TLV_INIT:
753 pieces->init = tlv_data;
754 pieces->init_size = tlv_len;
756 case IWL_UCODE_TLV_INIT_DATA:
757 pieces->init_data = tlv_data;
758 pieces->init_data_size = tlv_len;
760 case IWL_UCODE_TLV_BOOT:
761 IWL_ERR(priv, "Found unexpected BOOT ucode\n");
763 case IWL_UCODE_TLV_PROBE_MAX_LEN:
764 if (tlv_len != sizeof(u32))
765 goto invalid_tlv_len;
766 capa->max_probe_length =
767 le32_to_cpup((__le32 *)tlv_data);
769 case IWL_UCODE_TLV_PAN:
771 goto invalid_tlv_len;
772 capa->flags |= IWL_UCODE_TLV_FLAGS_PAN;
774 case IWL_UCODE_TLV_FLAGS:
775 /* must be at least one u32 */
776 if (tlv_len < sizeof(u32))
777 goto invalid_tlv_len;
778 /* and a proper number of u32s */
779 if (tlv_len % sizeof(u32))
780 goto invalid_tlv_len;
782 * This driver only reads the first u32 as
783 * right now no more features are defined,
784 * if that changes then either the driver
785 * will not work with the new firmware, or
786 * it'll not take advantage of new features.
788 capa->flags = le32_to_cpup((__le32 *)tlv_data);
790 case IWL_UCODE_TLV_INIT_EVTLOG_PTR:
791 if (tlv_len != sizeof(u32))
792 goto invalid_tlv_len;
793 pieces->init_evtlog_ptr =
794 le32_to_cpup((__le32 *)tlv_data);
796 case IWL_UCODE_TLV_INIT_EVTLOG_SIZE:
797 if (tlv_len != sizeof(u32))
798 goto invalid_tlv_len;
799 pieces->init_evtlog_size =
800 le32_to_cpup((__le32 *)tlv_data);
802 case IWL_UCODE_TLV_INIT_ERRLOG_PTR:
803 if (tlv_len != sizeof(u32))
804 goto invalid_tlv_len;
805 pieces->init_errlog_ptr =
806 le32_to_cpup((__le32 *)tlv_data);
808 case IWL_UCODE_TLV_RUNT_EVTLOG_PTR:
809 if (tlv_len != sizeof(u32))
810 goto invalid_tlv_len;
811 pieces->inst_evtlog_ptr =
812 le32_to_cpup((__le32 *)tlv_data);
814 case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE:
815 if (tlv_len != sizeof(u32))
816 goto invalid_tlv_len;
817 pieces->inst_evtlog_size =
818 le32_to_cpup((__le32 *)tlv_data);
820 case IWL_UCODE_TLV_RUNT_ERRLOG_PTR:
821 if (tlv_len != sizeof(u32))
822 goto invalid_tlv_len;
823 pieces->inst_errlog_ptr =
824 le32_to_cpup((__le32 *)tlv_data);
826 case IWL_UCODE_TLV_ENHANCE_SENS_TBL:
828 goto invalid_tlv_len;
829 priv->enhance_sensitivity_table = true;
831 case IWL_UCODE_TLV_WOWLAN_INST:
832 pieces->wowlan_inst = tlv_data;
833 pieces->wowlan_inst_size = tlv_len;
835 case IWL_UCODE_TLV_WOWLAN_DATA:
836 pieces->wowlan_data = tlv_data;
837 pieces->wowlan_data_size = tlv_len;
839 case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE:
840 if (tlv_len != sizeof(u32))
841 goto invalid_tlv_len;
842 capa->standard_phy_calibration_size =
843 le32_to_cpup((__le32 *)tlv_data);
846 IWL_DEBUG_INFO(priv, "unknown TLV: %d\n", tlv_type);
852 IWL_ERR(priv, "invalid TLV after parsing: %zd\n", len);
853 iwl_print_hex_dump(priv, IWL_DL_FW, (u8 *)data, len);
860 IWL_ERR(priv, "TLV %d has invalid size: %u\n", tlv_type, tlv_len);
861 iwl_print_hex_dump(priv, IWL_DL_FW, tlv_data, tlv_len);
867 * iwl_ucode_callback - callback when firmware was loaded
869 * If loaded successfully, copies the firmware into buffers
870 * for the card to fetch (via DMA).
872 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
874 struct iwl_priv *priv = context;
875 struct iwl_ucode_header *ucode;
877 struct iwlagn_firmware_pieces pieces;
878 const unsigned int api_max = cfg(priv)->ucode_api_max;
879 unsigned int api_ok = cfg(priv)->ucode_api_ok;
880 const unsigned int api_min = cfg(priv)->ucode_api_min;
884 struct iwlagn_ucode_capabilities ucode_capa = {
885 .max_probe_length = 200,
886 .standard_phy_calibration_size =
887 IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE,
893 memset(&pieces, 0, sizeof(pieces));
896 if (priv->fw_index <= api_ok)
898 "request for firmware file '%s' failed.\n",
899 priv->firmware_name);
903 IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
904 priv->firmware_name, ucode_raw->size);
906 /* Make sure that we got at least the API version number */
907 if (ucode_raw->size < 4) {
908 IWL_ERR(priv, "File size way too small!\n");
912 /* Data from ucode file: header followed by uCode images */
913 ucode = (struct iwl_ucode_header *)ucode_raw->data;
916 err = iwlagn_load_legacy_firmware(priv, ucode_raw, &pieces);
918 err = iwlagn_load_firmware(priv, ucode_raw, &pieces,
924 api_ver = IWL_UCODE_API(priv->ucode_ver);
925 build = pieces.build;
928 * api_ver should match the api version forming part of the
929 * firmware filename ... but we don't check for that and only rely
930 * on the API version read from firmware header from here on forward
932 /* no api version check required for experimental uCode */
933 if (priv->fw_index != UCODE_EXPERIMENTAL_INDEX) {
934 if (api_ver < api_min || api_ver > api_max) {
936 "Driver unable to support your firmware API. "
937 "Driver supports v%u, firmware is v%u.\n",
942 if (api_ver < api_ok) {
943 if (api_ok != api_max)
944 IWL_ERR(priv, "Firmware has old API version, "
945 "expected v%u through v%u, got v%u.\n",
946 api_ok, api_max, api_ver);
948 IWL_ERR(priv, "Firmware has old API version, "
949 "expected v%u, got v%u.\n",
951 IWL_ERR(priv, "New firmware can be obtained from "
952 "http://www.intellinuxwireless.org/.\n");
957 sprintf(buildstr, " build %u%s", build,
958 (priv->fw_index == UCODE_EXPERIMENTAL_INDEX)
963 IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u%s\n",
964 IWL_UCODE_MAJOR(priv->ucode_ver),
965 IWL_UCODE_MINOR(priv->ucode_ver),
966 IWL_UCODE_API(priv->ucode_ver),
967 IWL_UCODE_SERIAL(priv->ucode_ver),
970 snprintf(priv->hw->wiphy->fw_version,
971 sizeof(priv->hw->wiphy->fw_version),
973 IWL_UCODE_MAJOR(priv->ucode_ver),
974 IWL_UCODE_MINOR(priv->ucode_ver),
975 IWL_UCODE_API(priv->ucode_ver),
976 IWL_UCODE_SERIAL(priv->ucode_ver),
980 * For any of the failures below (before allocating pci memory)
981 * we will try to load a version with a smaller API -- maybe the
982 * user just got a corrupted version of the latest API.
985 IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
987 IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %Zd\n",
989 IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %Zd\n",
991 IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %Zd\n",
993 IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %Zd\n",
994 pieces.init_data_size);
996 /* Verify that uCode images will fit in card's SRAM */
997 if (pieces.inst_size > hw_params(priv).max_inst_size) {
998 IWL_ERR(priv, "uCode instr len %Zd too large to fit in\n",
1003 if (pieces.data_size > hw_params(priv).max_data_size) {
1004 IWL_ERR(priv, "uCode data len %Zd too large to fit in\n",
1009 if (pieces.init_size > hw_params(priv).max_inst_size) {
1010 IWL_ERR(priv, "uCode init instr len %Zd too large to fit in\n",
1015 if (pieces.init_data_size > hw_params(priv).max_data_size) {
1016 IWL_ERR(priv, "uCode init data len %Zd too large to fit in\n",
1017 pieces.init_data_size);
1021 /* Allocate ucode buffers for card's bus-master loading ... */
1023 /* Runtime instructions and 2 copies of data:
1024 * 1) unmodified from disk
1025 * 2) backup cache for save/restore during power-downs */
1026 if (iwl_alloc_fw_desc(trans(priv), &trans(priv)->ucode_rt.code,
1027 pieces.inst, pieces.inst_size))
1029 if (iwl_alloc_fw_desc(trans(priv), &trans(priv)->ucode_rt.data,
1030 pieces.data, pieces.data_size))
1033 /* Initialization instructions and data */
1034 if (pieces.init_size && pieces.init_data_size) {
1035 if (iwl_alloc_fw_desc(trans(priv),
1036 &trans(priv)->ucode_init.code,
1037 pieces.init, pieces.init_size))
1039 if (iwl_alloc_fw_desc(trans(priv),
1040 &trans(priv)->ucode_init.data,
1041 pieces.init_data, pieces.init_data_size))
1045 /* WoWLAN instructions and data */
1046 if (pieces.wowlan_inst_size && pieces.wowlan_data_size) {
1047 if (iwl_alloc_fw_desc(trans(priv),
1048 &trans(priv)->ucode_wowlan.code,
1050 pieces.wowlan_inst_size))
1052 if (iwl_alloc_fw_desc(trans(priv),
1053 &trans(priv)->ucode_wowlan.data,
1055 pieces.wowlan_data_size))
1059 /* Now that we can no longer fail, copy information */
1062 * The (size - 16) / 12 formula is based on the information recorded
1063 * for each event, which is of mode 1 (including timestamp) for all
1064 * new microcodes that include this information.
1066 priv->init_evtlog_ptr = pieces.init_evtlog_ptr;
1067 if (pieces.init_evtlog_size)
1068 priv->init_evtlog_size = (pieces.init_evtlog_size - 16)/12;
1070 priv->init_evtlog_size =
1071 cfg(priv)->base_params->max_event_log_size;
1072 priv->init_errlog_ptr = pieces.init_errlog_ptr;
1073 priv->inst_evtlog_ptr = pieces.inst_evtlog_ptr;
1074 if (pieces.inst_evtlog_size)
1075 priv->inst_evtlog_size = (pieces.inst_evtlog_size - 16)/12;
1077 priv->inst_evtlog_size =
1078 cfg(priv)->base_params->max_event_log_size;
1079 priv->inst_errlog_ptr = pieces.inst_errlog_ptr;
1080 #ifndef CONFIG_IWLWIFI_P2P
1081 ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
1084 priv->new_scan_threshold_behaviour =
1085 !!(ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
1087 if (!(cfg(priv)->sku & EEPROM_SKU_CAP_IPAN_ENABLE))
1088 ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
1091 * if not PAN, then don't support P2P -- might be a uCode
1092 * packaging bug or due to the eeprom check above
1094 if (!(ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN))
1095 ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
1097 if (ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN) {
1098 priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
1099 priv->shrd->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
1101 priv->sta_key_max_num = STA_KEY_MAX_NUM;
1102 priv->shrd->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
1105 * figure out the offset of chain noise reset and gain commands
1106 * base on the size of standard phy calibration commands table size
1108 if (ucode_capa.standard_phy_calibration_size >
1109 IWL_MAX_PHY_CALIBRATE_TBL_SIZE)
1110 ucode_capa.standard_phy_calibration_size =
1111 IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE;
1113 priv->phy_calib_chain_noise_reset_cmd =
1114 ucode_capa.standard_phy_calibration_size;
1115 priv->phy_calib_chain_noise_gain_cmd =
1116 ucode_capa.standard_phy_calibration_size + 1;
1118 /* initialize all valid contexts */
1119 iwl_init_context(priv, ucode_capa.flags);
1121 /**************************************************
1122 * This is still part of probe() in a sense...
1124 * 9. Setup and register with mac80211 and debugfs
1125 **************************************************/
1126 err = iwlagn_mac_setup_register(priv, &ucode_capa);
1130 err = iwl_dbgfs_register(priv, DRV_NAME);
1132 IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
1134 /* We have our copies now, allow OS release its copies */
1135 release_firmware(ucode_raw);
1136 complete(&priv->firmware_loading_complete);
1140 /* try next, if any */
1141 if (iwl_request_firmware(priv, false))
1143 release_firmware(ucode_raw);
1147 IWL_ERR(priv, "failed to allocate pci memory\n");
1148 iwl_dealloc_ucode(trans(priv));
1150 complete(&priv->firmware_loading_complete);
1151 device_release_driver(trans(priv)->dev);
1152 release_firmware(ucode_raw);
1155 static void iwl_rf_kill_ct_config(struct iwl_priv *priv)
1157 struct iwl_ct_kill_config cmd;
1158 struct iwl_ct_kill_throttling_config adv_cmd;
1159 unsigned long flags;
1162 spin_lock_irqsave(&priv->shrd->lock, flags);
1163 iwl_write32(trans(priv), CSR_UCODE_DRV_GP1_CLR,
1164 CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
1165 spin_unlock_irqrestore(&priv->shrd->lock, flags);
1166 priv->thermal_throttle.ct_kill_toggle = false;
1168 if (cfg(priv)->base_params->support_ct_kill_exit) {
1169 adv_cmd.critical_temperature_enter =
1170 cpu_to_le32(hw_params(priv).ct_kill_threshold);
1171 adv_cmd.critical_temperature_exit =
1172 cpu_to_le32(hw_params(priv).ct_kill_exit_threshold);
1174 ret = iwl_trans_send_cmd_pdu(trans(priv),
1175 REPLY_CT_KILL_CONFIG_CMD,
1176 CMD_SYNC, sizeof(adv_cmd), &adv_cmd);
1178 IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1180 IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
1181 "succeeded, critical temperature enter is %d,"
1183 hw_params(priv).ct_kill_threshold,
1184 hw_params(priv).ct_kill_exit_threshold);
1186 cmd.critical_temperature_R =
1187 cpu_to_le32(hw_params(priv).ct_kill_threshold);
1189 ret = iwl_trans_send_cmd_pdu(trans(priv),
1190 REPLY_CT_KILL_CONFIG_CMD,
1191 CMD_SYNC, sizeof(cmd), &cmd);
1193 IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1195 IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
1197 "critical temperature is %d\n",
1198 hw_params(priv).ct_kill_threshold);
1202 static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg)
1204 struct iwl_calib_cfg_cmd calib_cfg_cmd;
1205 struct iwl_host_cmd cmd = {
1206 .id = CALIBRATION_CFG_CMD,
1207 .len = { sizeof(struct iwl_calib_cfg_cmd), },
1208 .data = { &calib_cfg_cmd, },
1211 memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
1212 calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_RT_CFG_ALL;
1213 calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg);
1215 return iwl_trans_send_cmd(trans(priv), &cmd);
1219 static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
1221 struct iwl_tx_ant_config_cmd tx_ant_cmd = {
1222 .valid = cpu_to_le32(valid_tx_ant),
1225 if (IWL_UCODE_API(priv->ucode_ver) > 1) {
1226 IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant);
1227 return iwl_trans_send_cmd_pdu(trans(priv),
1228 TX_ANT_CONFIGURATION_CMD,
1230 sizeof(struct iwl_tx_ant_config_cmd),
1233 IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n");
1239 * iwl_alive_start - called after REPLY_ALIVE notification received
1240 * from protocol/runtime uCode (initialization uCode's
1241 * Alive gets handled by iwl_init_alive_start()).
1243 int iwl_alive_start(struct iwl_priv *priv)
1246 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
1248 IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
1250 /* After the ALIVE response, we can send host commands to the uCode */
1251 set_bit(STATUS_ALIVE, &priv->shrd->status);
1253 /* Enable watchdog to monitor the driver tx queues */
1254 iwl_setup_watchdog(priv);
1256 if (iwl_is_rfkill(priv->shrd))
1259 if (priv->event_log.ucode_trace) {
1260 /* start collecting data now */
1261 mod_timer(&priv->ucode_trace, jiffies);
1264 /* download priority table before any calibration request */
1265 if (cfg(priv)->bt_params &&
1266 cfg(priv)->bt_params->advanced_bt_coexist) {
1267 /* Configure Bluetooth device coexistence support */
1268 if (cfg(priv)->bt_params->bt_sco_disable)
1269 priv->bt_enable_pspoll = false;
1271 priv->bt_enable_pspoll = true;
1273 priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
1274 priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
1275 priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
1276 iwlagn_send_advance_bt_config(priv);
1277 priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS;
1278 priv->cur_rssi_ctx = NULL;
1280 iwl_send_prio_tbl(trans(priv));
1282 /* FIXME: w/a to force change uCode BT state machine */
1283 ret = iwl_send_bt_env(trans(priv), IWL_BT_COEX_ENV_OPEN,
1284 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
1287 ret = iwl_send_bt_env(trans(priv), IWL_BT_COEX_ENV_CLOSE,
1288 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
1293 * default is 2-wire BT coexexistence support
1295 iwl_send_bt_config(priv);
1299 * Perform runtime calibrations, including DC calibration.
1301 iwlagn_send_calib_cfg_rt(priv, IWL_CALIB_CFG_DC_IDX);
1303 ieee80211_wake_queues(priv->hw);
1305 priv->active_rate = IWL_RATES_MASK;
1307 /* Configure Tx antenna selection based on H/W config */
1308 iwlagn_send_tx_ant_config(priv, cfg(priv)->valid_tx_ant);
1310 if (iwl_is_associated_ctx(ctx) && !priv->shrd->wowlan) {
1311 struct iwl_rxon_cmd *active_rxon =
1312 (struct iwl_rxon_cmd *)&ctx->active;
1313 /* apply any changes in staging */
1314 ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
1315 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1317 struct iwl_rxon_context *tmp;
1318 /* Initialize our rx_config data */
1319 for_each_context(priv, tmp)
1320 iwl_connection_init_rx_config(priv, tmp);
1322 iwlagn_set_rxon_chain(priv, ctx);
1325 if (!priv->shrd->wowlan) {
1326 /* WoWLAN ucode will not reply in the same way, skip it */
1327 iwl_reset_run_time_calib(priv);
1330 set_bit(STATUS_READY, &priv->shrd->status);
1332 /* Configure the adapter for unassociated operation */
1333 ret = iwlagn_commit_rxon(priv, ctx);
1337 /* At this point, the NIC is initialized and operational */
1338 iwl_rf_kill_ct_config(priv);
1340 IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
1342 return iwl_power_update_mode(priv, true);
1345 static void iwl_cancel_deferred_work(struct iwl_priv *priv);
1347 void __iwl_down(struct iwl_priv *priv)
1351 IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
1353 iwl_scan_cancel_timeout(priv, 200);
1356 * If active, scanning won't cancel it, so say it expired.
1357 * No race since we hold the mutex here and a new one
1358 * can't come in at this time.
1360 ieee80211_remain_on_channel_expired(priv->hw);
1363 test_and_set_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
1365 /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
1366 * to prevent rearm timer */
1367 del_timer_sync(&priv->watchdog);
1369 iwl_clear_ucode_stations(priv, NULL);
1370 iwl_dealloc_bcast_stations(priv);
1371 iwl_clear_driver_stations(priv);
1373 /* reset BT coex data */
1374 priv->bt_status = 0;
1375 priv->cur_rssi_ctx = NULL;
1376 priv->bt_is_sco = 0;
1377 if (cfg(priv)->bt_params)
1378 priv->bt_traffic_load =
1379 cfg(priv)->bt_params->bt_init_traffic_load;
1381 priv->bt_traffic_load = 0;
1382 priv->bt_full_concurrent = false;
1383 priv->bt_ci_compliance = 0;
1385 /* Wipe out the EXIT_PENDING status bit if we are not actually
1386 * exiting the module */
1388 clear_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
1390 if (priv->mac80211_registered)
1391 ieee80211_stop_queues(priv->hw);
1393 iwl_trans_stop_device(trans(priv));
1395 /* Clear out all status bits but a few that are stable across reset */
1396 priv->shrd->status &=
1397 test_bit(STATUS_RF_KILL_HW, &priv->shrd->status) <<
1399 test_bit(STATUS_GEO_CONFIGURED, &priv->shrd->status) <<
1400 STATUS_GEO_CONFIGURED |
1401 test_bit(STATUS_FW_ERROR, &priv->shrd->status) <<
1403 test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) <<
1404 STATUS_EXIT_PENDING;
1406 dev_kfree_skb(priv->beacon_skb);
1407 priv->beacon_skb = NULL;
1410 void iwl_down(struct iwl_priv *priv)
1412 mutex_lock(&priv->shrd->mutex);
1414 mutex_unlock(&priv->shrd->mutex);
1416 iwl_cancel_deferred_work(priv);
1419 /*****************************************************************************
1421 * Workqueue callbacks
1423 *****************************************************************************/
1425 static void iwl_bg_run_time_calib_work(struct work_struct *work)
1427 struct iwl_priv *priv = container_of(work, struct iwl_priv,
1428 run_time_calib_work);
1430 mutex_lock(&priv->shrd->mutex);
1432 if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) ||
1433 test_bit(STATUS_SCANNING, &priv->shrd->status)) {
1434 mutex_unlock(&priv->shrd->mutex);
1438 if (priv->start_calib) {
1439 iwl_chain_noise_calibration(priv);
1440 iwl_sensitivity_calibration(priv);
1443 mutex_unlock(&priv->shrd->mutex);
1446 void iwlagn_prepare_restart(struct iwl_priv *priv)
1448 struct iwl_rxon_context *ctx;
1449 bool bt_full_concurrent;
1450 u8 bt_ci_compliance;
1455 lockdep_assert_held(&priv->shrd->mutex);
1457 for_each_context(priv, ctx)
1462 * __iwl_down() will clear the BT status variables,
1463 * which is correct, but when we restart we really
1464 * want to keep them so restore them afterwards.
1466 * The restart process will later pick them up and
1467 * re-configure the hw when we reconfigure the BT
1470 bt_full_concurrent = priv->bt_full_concurrent;
1471 bt_ci_compliance = priv->bt_ci_compliance;
1472 bt_load = priv->bt_traffic_load;
1473 bt_status = priv->bt_status;
1474 bt_is_sco = priv->bt_is_sco;
1478 priv->bt_full_concurrent = bt_full_concurrent;
1479 priv->bt_ci_compliance = bt_ci_compliance;
1480 priv->bt_traffic_load = bt_load;
1481 priv->bt_status = bt_status;
1482 priv->bt_is_sco = bt_is_sco;
1485 static void iwl_bg_restart(struct work_struct *data)
1487 struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
1489 if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
1492 if (test_and_clear_bit(STATUS_FW_ERROR, &priv->shrd->status)) {
1493 mutex_lock(&priv->shrd->mutex);
1494 iwlagn_prepare_restart(priv);
1495 mutex_unlock(&priv->shrd->mutex);
1496 iwl_cancel_deferred_work(priv);
1497 ieee80211_restart_hw(priv->hw);
1506 void iwlagn_disable_roc(struct iwl_priv *priv)
1508 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN];
1510 lockdep_assert_held(&priv->shrd->mutex);
1512 if (!priv->hw_roc_setup)
1515 ctx->staging.dev_type = RXON_DEV_TYPE_P2P;
1516 ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1518 priv->hw_roc_channel = NULL;
1520 memset(ctx->staging.node_addr, 0, ETH_ALEN);
1522 iwlagn_commit_rxon(priv, ctx);
1524 ctx->is_active = false;
1525 priv->hw_roc_setup = false;
1528 static void iwlagn_disable_roc_work(struct work_struct *work)
1530 struct iwl_priv *priv = container_of(work, struct iwl_priv,
1531 hw_roc_disable_work.work);
1533 mutex_lock(&priv->shrd->mutex);
1534 iwlagn_disable_roc(priv);
1535 mutex_unlock(&priv->shrd->mutex);
1538 /*****************************************************************************
1540 * driver setup and teardown
1542 *****************************************************************************/
1544 static void iwl_setup_deferred_work(struct iwl_priv *priv)
1546 priv->shrd->workqueue = create_singlethread_workqueue(DRV_NAME);
1548 init_waitqueue_head(&priv->shrd->wait_command_queue);
1550 INIT_WORK(&priv->restart, iwl_bg_restart);
1551 INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
1552 INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
1553 INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
1554 INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency);
1555 INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config);
1556 INIT_DELAYED_WORK(&priv->hw_roc_disable_work,
1557 iwlagn_disable_roc_work);
1559 iwl_setup_scan_deferred_work(priv);
1561 if (cfg(priv)->lib->bt_setup_deferred_work)
1562 cfg(priv)->lib->bt_setup_deferred_work(priv);
1564 init_timer(&priv->statistics_periodic);
1565 priv->statistics_periodic.data = (unsigned long)priv;
1566 priv->statistics_periodic.function = iwl_bg_statistics_periodic;
1568 init_timer(&priv->ucode_trace);
1569 priv->ucode_trace.data = (unsigned long)priv;
1570 priv->ucode_trace.function = iwl_bg_ucode_trace;
1572 init_timer(&priv->watchdog);
1573 priv->watchdog.data = (unsigned long)priv;
1574 priv->watchdog.function = iwl_bg_watchdog;
1577 static void iwl_cancel_deferred_work(struct iwl_priv *priv)
1579 if (cfg(priv)->lib->cancel_deferred_work)
1580 cfg(priv)->lib->cancel_deferred_work(priv);
1582 cancel_work_sync(&priv->run_time_calib_work);
1583 cancel_work_sync(&priv->beacon_update);
1585 iwl_cancel_scan_deferred_work(priv);
1587 cancel_work_sync(&priv->bt_full_concurrency);
1588 cancel_work_sync(&priv->bt_runtime_config);
1589 cancel_delayed_work_sync(&priv->hw_roc_disable_work);
1591 del_timer_sync(&priv->statistics_periodic);
1592 del_timer_sync(&priv->ucode_trace);
1595 static void iwl_init_hw_rates(struct iwl_priv *priv,
1596 struct ieee80211_rate *rates)
1600 for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
1601 rates[i].bitrate = iwl_rates[i].ieee * 5;
1602 rates[i].hw_value = i; /* Rate scaling will work on indexes */
1603 rates[i].hw_value_short = i;
1605 if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
1607 * If CCK != 1M then set short preamble rate flag.
1610 (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
1611 0 : IEEE80211_RATE_SHORT_PREAMBLE;
1616 static int iwl_init_drv(struct iwl_priv *priv)
1620 spin_lock_init(&priv->shrd->sta_lock);
1622 mutex_init(&priv->shrd->mutex);
1624 INIT_LIST_HEAD(&trans(priv)->calib_results);
1626 priv->ieee_channels = NULL;
1627 priv->ieee_rates = NULL;
1628 priv->band = IEEE80211_BAND_2GHZ;
1630 priv->iw_mode = NL80211_IFTYPE_STATION;
1631 priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
1632 priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
1633 priv->agg_tids_count = 0;
1635 /* initialize force reset */
1636 priv->force_reset[IWL_RF_RESET].reset_duration =
1637 IWL_DELAY_NEXT_FORCE_RF_RESET;
1638 priv->force_reset[IWL_FW_RESET].reset_duration =
1639 IWL_DELAY_NEXT_FORCE_FW_RELOAD;
1641 priv->rx_statistics_jiffies = jiffies;
1643 /* Choose which receivers/antennas to use */
1644 iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
1646 iwl_init_scan_params(priv);
1649 if (cfg(priv)->bt_params &&
1650 cfg(priv)->bt_params->advanced_bt_coexist) {
1651 priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
1652 priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
1653 priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
1654 priv->bt_on_thresh = BT_ON_THRESHOLD_DEF;
1655 priv->bt_duration = BT_DURATION_LIMIT_DEF;
1656 priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
1659 ret = iwl_init_channel_map(priv);
1661 IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
1665 ret = iwl_init_geos(priv);
1667 IWL_ERR(priv, "initializing geos failed: %d\n", ret);
1668 goto err_free_channel_map;
1670 iwl_init_hw_rates(priv, priv->ieee_rates);
1674 err_free_channel_map:
1675 iwl_free_channel_map(priv);
1680 static void iwl_uninit_drv(struct iwl_priv *priv)
1682 iwl_free_geos(priv);
1683 iwl_free_channel_map(priv);
1684 if (priv->tx_cmd_pool)
1685 kmem_cache_destroy(priv->tx_cmd_pool);
1686 kfree(priv->scan_cmd);
1687 kfree(priv->beacon_cmd);
1688 kfree(rcu_dereference_raw(priv->noa_data));
1689 #ifdef CONFIG_IWLWIFI_DEBUGFS
1690 kfree(priv->wowlan_sram);
1696 static u32 iwl_hw_detect(struct iwl_priv *priv)
1698 return iwl_read32(trans(priv), CSR_HW_REV);
1701 /* Size of one Rx buffer in host DRAM */
1702 #define IWL_RX_BUF_SIZE_4K (4 * 1024)
1703 #define IWL_RX_BUF_SIZE_8K (8 * 1024)
1705 static int iwl_set_hw_params(struct iwl_priv *priv)
1707 if (iwlagn_mod_params.amsdu_size_8K)
1708 hw_params(priv).rx_page_order =
1709 get_order(IWL_RX_BUF_SIZE_8K);
1711 hw_params(priv).rx_page_order =
1712 get_order(IWL_RX_BUF_SIZE_4K);
1714 if (iwlagn_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
1715 cfg(priv)->sku &= ~EEPROM_SKU_CAP_11N_ENABLE;
1717 hw_params(priv).num_ampdu_queues =
1718 cfg(priv)->base_params->num_of_ampdu_queues;
1719 hw_params(priv).shadow_reg_enable =
1720 cfg(priv)->base_params->shadow_reg_enable;
1721 hw_params(priv).sku = cfg(priv)->sku;
1722 hw_params(priv).wd_timeout = cfg(priv)->base_params->wd_timeout;
1724 /* Device-specific setup */
1725 return cfg(priv)->lib->set_hw_params(priv);
1730 static void iwl_debug_config(struct iwl_priv *priv)
1732 dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEBUG "
1733 #ifdef CONFIG_IWLWIFI_DEBUG
1738 dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEBUGFS "
1739 #ifdef CONFIG_IWLWIFI_DEBUGFS
1744 dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEVICE_TRACING "
1745 #ifdef CONFIG_IWLWIFI_DEVICE_TRACING
1751 dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEVICE_TESTMODE "
1752 #ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
1757 dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_P2P "
1758 #ifdef CONFIG_IWLWIFI_P2P
1765 int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
1766 struct iwl_cfg *cfg)
1769 struct iwl_priv *priv;
1770 struct ieee80211_hw *hw;
1774 /************************
1775 * 1. Allocating HW data
1776 ************************/
1777 hw = iwl_alloc_all();
1779 pr_err("%s: Cannot allocate network device\n", cfg->name);
1785 priv->shrd = bus->shrd;
1786 priv->shrd->priv = priv;
1788 /* At this point both hw and priv are allocated. */
1790 SET_IEEE80211_DEV(hw, trans(priv)->dev);
1792 /* what debugging capabilities we have */
1793 iwl_debug_config(priv);
1795 IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
1798 /* is antenna coupling more than 35dB ? */
1799 priv->bt_ant_couple_ok =
1800 (iwlagn_mod_params.ant_coupling >
1801 IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
1804 /* enable/disable bt channel inhibition */
1805 priv->bt_ch_announce = iwlagn_mod_params.bt_ch_announce;
1806 IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n",
1807 (priv->bt_ch_announce) ? "On" : "Off");
1809 if (iwl_alloc_traffic_mem(priv))
1810 IWL_ERR(priv, "Not enough memory to generate traffic log\n");
1812 /* these spin locks will be used in apm_ops.init and EEPROM access
1813 * we should init now
1815 spin_lock_init(&trans(priv)->reg_lock);
1816 spin_lock_init(&priv->shrd->lock);
1819 * stop and reset the on-board processor just in case it is in a
1820 * strange state ... like being left stranded by a primary kernel
1821 * and this is now the kdump kernel trying to start up
1823 iwl_write32(trans(priv), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
1825 /***********************
1826 * 3. Read REV register
1827 ***********************/
1828 hw_rev = iwl_hw_detect(priv);
1829 IWL_INFO(priv, "Detected %s, REV=0x%X\n",
1830 cfg(priv)->name, hw_rev);
1832 err = iwl_trans_start_hw(trans(priv));
1834 goto out_free_traffic_mem;
1839 /* switch the NIC on before accessing the EEPROM */
1841 /* Read the EEPROM */
1842 err = iwl_eeprom_init(priv, hw_rev);
1843 /* Reset chip to save power until we load uCode during "up". */
1846 IWL_ERR(priv, "Unable to init EEPROM\n");
1847 goto out_free_traffic_mem;
1849 err = iwl_eeprom_check_version(priv);
1851 goto out_free_eeprom;
1853 err = iwl_eeprom_check_sku(priv);
1855 goto out_free_eeprom;
1857 /* extract MAC Address */
1858 iwl_eeprom_get_mac(priv->shrd, priv->addresses[0].addr);
1859 IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr);
1860 priv->hw->wiphy->addresses = priv->addresses;
1861 priv->hw->wiphy->n_addresses = 1;
1862 num_mac = iwl_eeprom_query16(priv->shrd, EEPROM_NUM_MAC_ADDRESS);
1864 memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
1866 priv->addresses[1].addr[5]++;
1867 priv->hw->wiphy->n_addresses++;
1870 /************************
1871 * 5. Setup HW constants
1872 ************************/
1873 if (iwl_set_hw_params(priv)) {
1875 IWL_ERR(priv, "failed to set hw parameters\n");
1876 goto out_free_eeprom;
1879 /*******************
1881 *******************/
1883 err = iwl_init_drv(priv);
1885 goto out_free_eeprom;
1886 /* At this point both hw and priv are initialized. */
1888 /********************
1890 ********************/
1891 iwl_setup_deferred_work(priv);
1892 iwl_setup_rx_handlers(priv);
1893 iwl_testmode_init(priv);
1895 /*********************************************
1896 * 8. Enable interrupts
1897 *********************************************/
1899 iwl_enable_rfkill_int(priv);
1901 /* If platform's RF_KILL switch is NOT set to KILL */
1902 if (iwl_read32(trans(priv),
1903 CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
1904 clear_bit(STATUS_RF_KILL_HW, &priv->shrd->status);
1906 set_bit(STATUS_RF_KILL_HW, &priv->shrd->status);
1908 wiphy_rfkill_set_hw_state(priv->hw->wiphy,
1909 test_bit(STATUS_RF_KILL_HW, &priv->shrd->status));
1911 iwl_power_initialize(priv);
1912 iwl_tt_initialize(priv);
1914 init_completion(&priv->firmware_loading_complete);
1916 err = iwl_request_firmware(priv, true);
1918 goto out_destroy_workqueue;
1922 out_destroy_workqueue:
1923 destroy_workqueue(priv->shrd->workqueue);
1924 priv->shrd->workqueue = NULL;
1925 iwl_uninit_drv(priv);
1927 iwl_eeprom_free(priv->shrd);
1928 out_free_traffic_mem:
1929 iwl_free_traffic_mem(priv);
1930 ieee80211_free_hw(priv->hw);
1935 void __devexit iwl_remove(struct iwl_priv * priv)
1937 wait_for_completion(&priv->firmware_loading_complete);
1939 IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
1941 iwl_dbgfs_unregister(priv);
1943 /* ieee80211_unregister_hw call wil cause iwlagn_mac_stop to
1944 * to be called and iwl_down since we are removing the device
1945 * we need to set STATUS_EXIT_PENDING bit.
1947 set_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
1949 iwl_testmode_cleanup(priv);
1950 iwlagn_mac_unregister(priv);
1954 /*This will stop the queues, move the device to low power state */
1955 iwl_trans_stop_device(trans(priv));
1957 iwl_dealloc_ucode(trans(priv));
1959 iwl_eeprom_free(priv->shrd);
1961 /*netif_stop_queue(dev); */
1962 flush_workqueue(priv->shrd->workqueue);
1964 /* ieee80211_unregister_hw calls iwlagn_mac_stop, which flushes
1965 * priv->shrd->workqueue... so we can't take down the workqueue
1967 destroy_workqueue(priv->shrd->workqueue);
1968 priv->shrd->workqueue = NULL;
1969 iwl_free_traffic_mem(priv);
1971 iwl_uninit_drv(priv);
1973 dev_kfree_skb(priv->beacon_skb);
1975 ieee80211_free_hw(priv->hw);
1979 /*****************************************************************************
1981 * driver and module entry point
1983 *****************************************************************************/
1984 static int __init iwl_init(void)
1988 pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
1989 pr_info(DRV_COPYRIGHT "\n");
1991 ret = iwlagn_rate_control_register();
1993 pr_err("Unable to register rate control algorithm: %d\n", ret);
1997 ret = iwl_pci_register_driver();
2000 goto error_register;
2004 iwlagn_rate_control_unregister();
2008 static void __exit iwl_exit(void)
2010 iwl_pci_unregister_driver();
2011 iwlagn_rate_control_unregister();
2014 module_exit(iwl_exit);
2015 module_init(iwl_init);
2017 #ifdef CONFIG_IWLWIFI_DEBUG
2018 module_param_named(debug, iwlagn_mod_params.debug_level, uint,
2020 MODULE_PARM_DESC(debug, "debug output mask");
2023 module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
2024 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
2025 module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
2026 MODULE_PARM_DESC(queues_num, "number of hw queues.");
2027 module_param_named(11n_disable, iwlagn_mod_params.disable_11n, uint, S_IRUGO);
2028 MODULE_PARM_DESC(11n_disable,
2029 "disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX");
2030 module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
2032 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
2033 module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
2034 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
2036 module_param_named(ucode_alternative,
2037 iwlagn_mod_params.wanted_ucode_alternative,
2039 MODULE_PARM_DESC(ucode_alternative,
2040 "specify ucode alternative to use from ucode file");
2042 module_param_named(antenna_coupling, iwlagn_mod_params.ant_coupling,
2044 MODULE_PARM_DESC(antenna_coupling,
2045 "specify antenna coupling in dB (defualt: 0 dB)");
2047 module_param_named(bt_ch_inhibition, iwlagn_mod_params.bt_ch_announce,
2049 MODULE_PARM_DESC(bt_ch_inhibition,
2050 "Enable BT channel inhibition (default: enable)");
2052 module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO);
2053 MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
2055 module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO);
2056 MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])");
2058 module_param_named(wd_disable, iwlagn_mod_params.wd_disable, int, S_IRUGO);
2059 MODULE_PARM_DESC(wd_disable,
2060 "Disable stuck queue watchdog timer 0=system default, "
2061 "1=disable, 2=enable (default: 0)");
2064 * set bt_coex_active to true, uCode will do kill/defer
2065 * every time the priority line is asserted (BT is sending signals on the
2066 * priority line in the PCIx).
2067 * set bt_coex_active to false, uCode will ignore the BT activity and
2068 * perform the normal operation
2070 * User might experience transmit issue on some platform due to WiFi/BT
2071 * co-exist problem. The possible behaviors are:
2072 * Able to scan and finding all the available AP
2073 * Not able to associate with any AP
2074 * On those platforms, WiFi communication can be restored by set
2075 * "bt_coex_active" module parameter to "false"
2077 * default: bt_coex_active = true (BT_COEX_ENABLE)
2079 module_param_named(bt_coex_active, iwlagn_mod_params.bt_coex_active,
2081 MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)");
2083 module_param_named(led_mode, iwlagn_mod_params.led_mode, int, S_IRUGO);
2084 MODULE_PARM_DESC(led_mode, "0=system default, "
2085 "1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0)");
2087 module_param_named(power_save, iwlagn_mod_params.power_save,
2089 MODULE_PARM_DESC(power_save,
2090 "enable WiFi power management (default: disable)");
2092 module_param_named(power_level, iwlagn_mod_params.power_level,
2094 MODULE_PARM_DESC(power_level,
2095 "default power save level (range from 1 - 5, default: 1)");
2097 module_param_named(auto_agg, iwlagn_mod_params.auto_agg,
2099 MODULE_PARM_DESC(auto_agg,
2100 "enable agg w/o check traffic load (default: enable)");
2103 * For now, keep using power level 1 instead of automatically
2106 module_param_named(no_sleep_autoadjust, iwlagn_mod_params.no_sleep_autoadjust,
2108 MODULE_PARM_DESC(no_sleep_autoadjust,
2109 "don't automatically adjust sleep level "
2110 "according to maximum network latency (default: true)");