drivers/net/wireless/iwlwifi/iwl-1000.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  *  Intel Linux Wireless <ilw@linux.intel.com>
  23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  24  *
  25  *****************************************************************************/
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/delay.h>
  31 #include <linux/skbuff.h>
  32 #include <linux/netdevice.h>
  33 #include <net/mac80211.h>
  34 #include <linux/etherdevice.h>
  35 #include <asm/unaligned.h>
  36 #include <linux/stringify.h>
  37
  38 #include "iwl-eeprom.h"
  39 #include "iwl-dev.h"
  40 #include "iwl-core.h"
  41 #include "iwl-io.h"
  42 #include "iwl-agn.h"
  43 #include "iwl-agn-hw.h"
  44 #include "iwl-shared.h"
  45 #include "iwl-cfg.h"
  46 #include "iwl-prph.h"
  47
  48 /* Highest firmware API version supported */
  49 #define IWL1000_UCODE_API_MAX 5
  50 #define IWL100_UCODE_API_MAX 5
  51
  52 /* Oldest version we won't warn about */
  53 #define IWL1000_UCODE_API_OK 5
  54 #define IWL100_UCODE_API_OK 5
  55
  56 /* Lowest firmware API version supported */
  57 #define IWL1000_UCODE_API_MIN 1
  58 #define IWL100_UCODE_API_MIN 5
  59
  60 #define IWL1000_FW_PRE "iwlwifi-1000-"
  61 #define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE __stringify(api) ".ucode"
  62
  63 #define IWL100_FW_PRE "iwlwifi-100-"
  64 #define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE __stringify(api) ".ucode"
  65
  66
  67 /*
  68  * For 1000, use advance thermal throttling critical temperature threshold,
  69  * but legacy thermal management implementation for now.
  70  * This is for the reason of 1000 uCode using advance thermal throttling API
  71  * but not implement ct_kill_exit based on ct_kill exit temperature
  72  * so the thermal throttling will still based on legacy thermal throttling
  73  * management.
  74  * The code here need to be modified once 1000 uCode has the advanced thermal
  75  * throttling algorithm in place
  76  */
  77 static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
  78 {
  79         /* want Celsius */
  80         hw_params(priv).ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
  81         hw_params(priv).ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
  82 }
  83
  84 /* NIC configuration for 1000 series */
  85 static void iwl1000_nic_config(struct iwl_priv *priv)
  86 {
  87         /* set CSR_HW_CONFIG_REG for uCode use */
  88         iwl_set_bit(trans(priv), CSR_HW_IF_CONFIG_REG,
  89                     CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
  90                     CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
  91
  92         /* Setting digital SVR for 1000 card to 1.32V */
  93         /* locking is acquired in iwl_set_bits_mask_prph() function */
  94         iwl_set_bits_mask_prph(trans(priv), APMG_DIGITAL_SVR_REG,
  95                                 APMG_SVR_DIGITAL_VOLTAGE_1_32,
  96                                 ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
  97 }
  98
  99 static const struct iwl_sensitivity_ranges iwl1000_sensitivity = {
 100         .min_nrg_cck = 95,
 101         .auto_corr_min_ofdm = 90,
 102         .auto_corr_min_ofdm_mrc = 170,
 103         .auto_corr_min_ofdm_x1 = 120,
 104         .auto_corr_min_ofdm_mrc_x1 = 240,
 105
 106         .auto_corr_max_ofdm = 120,
 107         .auto_corr_max_ofdm_mrc = 210,
 108         .auto_corr_max_ofdm_x1 = 155,
 109         .auto_corr_max_ofdm_mrc_x1 = 290,
 110
 111         .auto_corr_min_cck = 125,
 112         .auto_corr_max_cck = 200,
 113         .auto_corr_min_cck_mrc = 170,
 114         .auto_corr_max_cck_mrc = 400,
 115         .nrg_th_cck = 95,
 116         .nrg_th_ofdm = 95,
 117
 118         .barker_corr_th_min = 190,
 119         .barker_corr_th_min_mrc = 390,
 120         .nrg_th_cca = 62,
 121 };
 122
 123 static void iwl1000_hw_set_hw_params(struct iwl_priv *priv)
 124 {
 125         hw_params(priv).ht40_channel =  BIT(IEEE80211_BAND_2GHZ);
 126
 127         hw_params(priv).tx_chains_num =
 128                 num_of_ant(hw_params(priv).valid_tx_ant);
 129         if (cfg(priv)->rx_with_siso_diversity)
 130                 hw_params(priv).rx_chains_num = 1;
 131         else
 132                 hw_params(priv).rx_chains_num =
 133                         num_of_ant(hw_params(priv).valid_rx_ant);
 134
 135         iwl1000_set_ct_threshold(priv);
 136
 137         /* Set initial sensitivity parameters */
 138         hw_params(priv).sens = &iwl1000_sensitivity;
 139 }
 140
 141 static struct iwl_lib_ops iwl1000_lib = {
 142         .set_hw_params = iwl1000_hw_set_hw_params,
 143         .nic_config = iwl1000_nic_config,
 144         .eeprom_ops = {
 145                 .regulatory_bands = {
 146                         EEPROM_REG_BAND_1_CHANNELS,
 147                         EEPROM_REG_BAND_2_CHANNELS,
 148                         EEPROM_REG_BAND_3_CHANNELS,
 149                         EEPROM_REG_BAND_4_CHANNELS,
 150                         EEPROM_REG_BAND_5_CHANNELS,
 151                         EEPROM_REG_BAND_24_HT40_CHANNELS,
 152                         EEPROM_REGULATORY_BAND_NO_HT40,
 153                 },
 154         },
 155         .temperature = iwlagn_temperature,
 156 };
 157
 158 static const struct iwl_base_params iwl1000_base_params = {
 159         .num_of_queues = IWLAGN_NUM_QUEUES,
 160         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 161         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 162         .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
 163         .max_ll_items = OTP_MAX_LL_ITEMS_1000,
 164         .shadow_ram_support = false,
 165         .led_compensation = 51,
 166         .support_ct_kill_exit = true,
 167         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF,
 168         .chain_noise_scale = 1000,
 169         .wd_timeout = IWL_DEF_WD_TIMEOUT,
 170         .max_event_log_size = 128,
 171         .wd_disable = true,
 172 };
 173
 174 static const struct iwl_ht_params iwl1000_ht_params = {
 175         .ht_greenfield_support = true,
 176         .use_rts_for_aggregation = true, /* use rts/cts protection */
 177         .smps_mode = IEEE80211_SMPS_DYNAMIC,
 178 };
 179
 180 #define IWL_DEVICE_1000                                         \
 181         .fw_name_pre = IWL1000_FW_PRE,                          \
 182         .ucode_api_max = IWL1000_UCODE_API_MAX,                 \
 183         .ucode_api_ok = IWL1000_UCODE_API_OK,                   \
 184         .ucode_api_min = IWL1000_UCODE_API_MIN,                 \
 185         .max_inst_size = IWLAGN_RTC_INST_SIZE,                  \
 186         .max_data_size = IWLAGN_RTC_DATA_SIZE,                  \
 187         .eeprom_ver = EEPROM_1000_EEPROM_VERSION,               \
 188         .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,       \
 189         .lib = &iwl1000_lib,                                    \
 190         .base_params = &iwl1000_base_params,                    \
 191         .led_mode = IWL_LED_BLINK
 192
 193 const struct iwl_cfg iwl1000_bgn_cfg = {
 194         .name = "Intel(R) Centrino(R) Wireless-N 1000 BGN",
 195         IWL_DEVICE_1000,
 196         .ht_params = &iwl1000_ht_params,
 197 };
 198
 199 const struct iwl_cfg iwl1000_bg_cfg = {
 200         .name = "Intel(R) Centrino(R) Wireless-N 1000 BG",
 201         IWL_DEVICE_1000,
 202 };
 203
 204 #define IWL_DEVICE_100                                          \
 205         .fw_name_pre = IWL100_FW_PRE,                           \
 206         .ucode_api_max = IWL100_UCODE_API_MAX,                  \
 207         .ucode_api_ok = IWL100_UCODE_API_OK,                    \
 208         .ucode_api_min = IWL100_UCODE_API_MIN,                  \
 209         .max_inst_size = IWLAGN_RTC_INST_SIZE,                  \
 210         .max_data_size = IWLAGN_RTC_DATA_SIZE,                  \
 211         .eeprom_ver = EEPROM_1000_EEPROM_VERSION,               \
 212         .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,       \
 213         .lib = &iwl1000_lib,                                    \
 214         .base_params = &iwl1000_base_params,                    \
 215         .led_mode = IWL_LED_RF_STATE,                           \
 216         .rx_with_siso_diversity = true
 217
 218 const struct iwl_cfg iwl100_bgn_cfg = {
 219         .name = "Intel(R) Centrino(R) Wireless-N 100 BGN",
 220         IWL_DEVICE_100,
 221         .ht_params = &iwl1000_ht_params,
 222 };
 223
 224 const struct iwl_cfg iwl100_bg_cfg = {
 225         .name = "Intel(R) Centrino(R) Wireless-N 100 BG",
 226         IWL_DEVICE_100,
 227 };
 228
 229 MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_OK));
 230 MODULE_FIRMWARE(IWL100_MODULE_FIRMWARE(IWL100_UCODE_API_OK));