drivers/net/wireless/ath/ath11k/hal_desc.h

   1 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
   2 /*
   3  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
   4  */
   5 #include "core.h"
   6
   7 #ifndef ATH11K_HAL_DESC_H
   8 #define ATH11K_HAL_DESC_H
   9
  10 #define BUFFER_ADDR_INFO0_ADDR         GENMASK(31, 0)
  11
  12 #define BUFFER_ADDR_INFO1_ADDR         GENMASK(7, 0)
  13 #define BUFFER_ADDR_INFO1_RET_BUF_MGR  GENMASK(10, 8)
  14 #define BUFFER_ADDR_INFO1_SW_COOKIE    GENMASK(31, 11)
  15
  16 struct ath11k_buffer_addr {
  17         u32 info0;
  18         u32 info1;
  19 } __packed;
  20
  21 /* ath11k_buffer_addr
  22  *
  23  * info0
  24  *              Address (lower 32 bits) of the msdu buffer or msdu extension
  25  *              descriptor or Link descriptor
  26  *
  27  * addr
  28  *              Address (upper 8 bits) of the msdu buffer or msdu extension
  29  *              descriptor or Link descriptor
  30  *
  31  * return_buffer_manager (RBM)
  32  *              Consumer: WBM
  33  *              Producer: SW/FW
  34  *              Indicates to which buffer manager the buffer or MSDU_EXTENSION
  35  *              descriptor or link descriptor that is being pointed to shall be
  36  *              returned after the frame has been processed. It is used by WBM
  37  *              for routing purposes.
  38  *
  39  *              Values are defined in enum %HAL_RX_BUF_RBM_
  40  *
  41  * sw_buffer_cookie
  42  *              Cookie field exclusively used by SW. HW ignores the contents,
  43  *              accept that it passes the programmed value on to other
  44  *              descriptors together with the physical address.
  45  *
  46  *              Field can be used by SW to for example associate the buffers
  47  *              physical address with the virtual address.
  48  */
  49
  50 enum hal_tlv_tag {
  51         HAL_MACTX_CBF_START                    =   0 /* 0x0 */,
  52         HAL_PHYRX_DATA                         =   1 /* 0x1 */,
  53         HAL_PHYRX_CBF_DATA_RESP                =   2 /* 0x2 */,
  54         HAL_PHYRX_ABORT_REQUEST                =   3 /* 0x3 */,
  55         HAL_PHYRX_USER_ABORT_NOTIFICATION      =   4 /* 0x4 */,
  56         HAL_MACTX_DATA_RESP                    =   5 /* 0x5 */,
  57         HAL_MACTX_CBF_DATA                     =   6 /* 0x6 */,
  58         HAL_MACTX_CBF_DONE                     =   7 /* 0x7 */,
  59         HAL_MACRX_CBF_READ_REQUEST             =   8 /* 0x8 */,
  60         HAL_MACRX_CBF_DATA_REQUEST             =   9 /* 0x9 */,
  61         HAL_MACRX_EXPECT_NDP_RECEPTION         =  10 /* 0xa */,
  62         HAL_MACRX_FREEZE_CAPTURE_CHANNEL       =  11 /* 0xb */,
  63         HAL_MACRX_NDP_TIMEOUT                  =  12 /* 0xc */,
  64         HAL_MACRX_ABORT_ACK                    =  13 /* 0xd */,
  65         HAL_MACRX_REQ_IMPLICIT_FB              =  14 /* 0xe */,
  66         HAL_MACRX_CHAIN_MASK                   =  15 /* 0xf */,
  67         HAL_MACRX_NAP_USER                     =  16 /* 0x10 */,
  68         HAL_MACRX_ABORT_REQUEST                =  17 /* 0x11 */,
  69         HAL_PHYTX_OTHER_TRANSMIT_INFO16        =  18 /* 0x12 */,
  70         HAL_PHYTX_ABORT_ACK                    =  19 /* 0x13 */,
  71         HAL_PHYTX_ABORT_REQUEST                =  20 /* 0x14 */,
  72         HAL_PHYTX_PKT_END                      =  21 /* 0x15 */,
  73         HAL_PHYTX_PPDU_HEADER_INFO_REQUEST     =  22 /* 0x16 */,
  74         HAL_PHYTX_REQUEST_CTRL_INFO            =  23 /* 0x17 */,
  75         HAL_PHYTX_DATA_REQUEST                 =  24 /* 0x18 */,
  76         HAL_PHYTX_BF_CV_LOADING_DONE           =  25 /* 0x19 */,
  77         HAL_PHYTX_NAP_ACK                      =  26 /* 0x1a */,
  78         HAL_PHYTX_NAP_DONE                     =  27 /* 0x1b */,
  79         HAL_PHYTX_OFF_ACK                      =  28 /* 0x1c */,
  80         HAL_PHYTX_ON_ACK                       =  29 /* 0x1d */,
  81         HAL_PHYTX_SYNTH_OFF_ACK                =  30 /* 0x1e */,
  82         HAL_PHYTX_DEBUG16                      =  31 /* 0x1f */,
  83         HAL_MACTX_ABORT_REQUEST                =  32 /* 0x20 */,
  84         HAL_MACTX_ABORT_ACK                    =  33 /* 0x21 */,
  85         HAL_MACTX_PKT_END                      =  34 /* 0x22 */,
  86         HAL_MACTX_PRE_PHY_DESC                 =  35 /* 0x23 */,
  87         HAL_MACTX_BF_PARAMS_COMMON             =  36 /* 0x24 */,
  88         HAL_MACTX_BF_PARAMS_PER_USER           =  37 /* 0x25 */,
  89         HAL_MACTX_PREFETCH_CV                  =  38 /* 0x26 */,
  90         HAL_MACTX_USER_DESC_COMMON             =  39 /* 0x27 */,
  91         HAL_MACTX_USER_DESC_PER_USER           =  40 /* 0x28 */,
  92         HAL_EXAMPLE_USER_TLV_16                =  41 /* 0x29 */,
  93         HAL_EXAMPLE_TLV_16                     =  42 /* 0x2a */,
  94         HAL_MACTX_PHY_OFF                      =  43 /* 0x2b */,
  95         HAL_MACTX_PHY_ON                       =  44 /* 0x2c */,
  96         HAL_MACTX_SYNTH_OFF                    =  45 /* 0x2d */,
  97         HAL_MACTX_EXPECT_CBF_COMMON            =  46 /* 0x2e */,
  98         HAL_MACTX_EXPECT_CBF_PER_USER          =  47 /* 0x2f */,
  99         HAL_MACTX_PHY_DESC                     =  48 /* 0x30 */,
 100         HAL_MACTX_L_SIG_A                      =  49 /* 0x31 */,
 101         HAL_MACTX_L_SIG_B                      =  50 /* 0x32 */,
 102         HAL_MACTX_HT_SIG                       =  51 /* 0x33 */,
 103         HAL_MACTX_VHT_SIG_A                    =  52 /* 0x34 */,
 104         HAL_MACTX_VHT_SIG_B_SU20               =  53 /* 0x35 */,
 105         HAL_MACTX_VHT_SIG_B_SU40               =  54 /* 0x36 */,
 106         HAL_MACTX_VHT_SIG_B_SU80               =  55 /* 0x37 */,
 107         HAL_MACTX_VHT_SIG_B_SU160              =  56 /* 0x38 */,
 108         HAL_MACTX_VHT_SIG_B_MU20               =  57 /* 0x39 */,
 109         HAL_MACTX_VHT_SIG_B_MU40               =  58 /* 0x3a */,
 110         HAL_MACTX_VHT_SIG_B_MU80               =  59 /* 0x3b */,
 111         HAL_MACTX_VHT_SIG_B_MU160              =  60 /* 0x3c */,
 112         HAL_MACTX_SERVICE                      =  61 /* 0x3d */,
 113         HAL_MACTX_HE_SIG_A_SU                  =  62 /* 0x3e */,
 114         HAL_MACTX_HE_SIG_A_MU_DL               =  63 /* 0x3f */,
 115         HAL_MACTX_HE_SIG_A_MU_UL               =  64 /* 0x40 */,
 116         HAL_MACTX_HE_SIG_B1_MU                 =  65 /* 0x41 */,
 117         HAL_MACTX_HE_SIG_B2_MU                 =  66 /* 0x42 */,
 118         HAL_MACTX_HE_SIG_B2_OFDMA              =  67 /* 0x43 */,
 119         HAL_MACTX_DELETE_CV                    =  68 /* 0x44 */,
 120         HAL_MACTX_MU_UPLINK_COMMON             =  69 /* 0x45 */,
 121         HAL_MACTX_MU_UPLINK_USER_SETUP         =  70 /* 0x46 */,
 122         HAL_MACTX_OTHER_TRANSMIT_INFO          =  71 /* 0x47 */,
 123         HAL_MACTX_PHY_NAP                      =  72 /* 0x48 */,
 124         HAL_MACTX_DEBUG                        =  73 /* 0x49 */,
 125         HAL_PHYRX_ABORT_ACK                    =  74 /* 0x4a */,
 126         HAL_PHYRX_GENERATED_CBF_DETAILS        =  75 /* 0x4b */,
 127         HAL_PHYRX_RSSI_LEGACY                  =  76 /* 0x4c */,
 128         HAL_PHYRX_RSSI_HT                      =  77 /* 0x4d */,
 129         HAL_PHYRX_USER_INFO                    =  78 /* 0x4e */,
 130         HAL_PHYRX_PKT_END                      =  79 /* 0x4f */,
 131         HAL_PHYRX_DEBUG                        =  80 /* 0x50 */,
 132         HAL_PHYRX_CBF_TRANSFER_DONE            =  81 /* 0x51 */,
 133         HAL_PHYRX_CBF_TRANSFER_ABORT           =  82 /* 0x52 */,
 134         HAL_PHYRX_L_SIG_A                      =  83 /* 0x53 */,
 135         HAL_PHYRX_L_SIG_B                      =  84 /* 0x54 */,
 136         HAL_PHYRX_HT_SIG                       =  85 /* 0x55 */,
 137         HAL_PHYRX_VHT_SIG_A                    =  86 /* 0x56 */,
 138         HAL_PHYRX_VHT_SIG_B_SU20               =  87 /* 0x57 */,
 139         HAL_PHYRX_VHT_SIG_B_SU40               =  88 /* 0x58 */,
 140         HAL_PHYRX_VHT_SIG_B_SU80               =  89 /* 0x59 */,
 141         HAL_PHYRX_VHT_SIG_B_SU160              =  90 /* 0x5a */,
 142         HAL_PHYRX_VHT_SIG_B_MU20               =  91 /* 0x5b */,
 143         HAL_PHYRX_VHT_SIG_B_MU40               =  92 /* 0x5c */,
 144         HAL_PHYRX_VHT_SIG_B_MU80               =  93 /* 0x5d */,
 145         HAL_PHYRX_VHT_SIG_B_MU160              =  94 /* 0x5e */,
 146         HAL_PHYRX_HE_SIG_A_SU                  =  95 /* 0x5f */,
 147         HAL_PHYRX_HE_SIG_A_MU_DL               =  96 /* 0x60 */,
 148         HAL_PHYRX_HE_SIG_A_MU_UL               =  97 /* 0x61 */,
 149         HAL_PHYRX_HE_SIG_B1_MU                 =  98 /* 0x62 */,
 150         HAL_PHYRX_HE_SIG_B2_MU                 =  99 /* 0x63 */,
 151         HAL_PHYRX_HE_SIG_B2_OFDMA              = 100 /* 0x64 */,
 152         HAL_PHYRX_OTHER_RECEIVE_INFO           = 101 /* 0x65 */,
 153         HAL_PHYRX_COMMON_USER_INFO             = 102 /* 0x66 */,
 154         HAL_PHYRX_DATA_DONE                    = 103 /* 0x67 */,
 155         HAL_RECEIVE_RSSI_INFO                  = 104 /* 0x68 */,
 156         HAL_RECEIVE_USER_INFO                  = 105 /* 0x69 */,
 157         HAL_MIMO_CONTROL_INFO                  = 106 /* 0x6a */,
 158         HAL_RX_LOCATION_INFO                   = 107 /* 0x6b */,
 159         HAL_COEX_TX_REQ                        = 108 /* 0x6c */,
 160         HAL_DUMMY                              = 109 /* 0x6d */,
 161         HAL_RX_TIMING_OFFSET_INFO              = 110 /* 0x6e */,
 162         HAL_EXAMPLE_TLV_32_NAME                = 111 /* 0x6f */,
 163         HAL_MPDU_LIMIT                         = 112 /* 0x70 */,
 164         HAL_NA_LENGTH_END                      = 113 /* 0x71 */,
 165         HAL_OLE_BUF_STATUS                     = 114 /* 0x72 */,
 166         HAL_PCU_PPDU_SETUP_DONE                = 115 /* 0x73 */,
 167         HAL_PCU_PPDU_SETUP_END                 = 116 /* 0x74 */,
 168         HAL_PCU_PPDU_SETUP_INIT                = 117 /* 0x75 */,
 169         HAL_PCU_PPDU_SETUP_START               = 118 /* 0x76 */,
 170         HAL_PDG_FES_SETUP                      = 119 /* 0x77 */,
 171         HAL_PDG_RESPONSE                       = 120 /* 0x78 */,
 172         HAL_PDG_TX_REQ                         = 121 /* 0x79 */,
 173         HAL_SCH_WAIT_INSTR                     = 122 /* 0x7a */,
 174         HAL_SCHEDULER_TLV                      = 123 /* 0x7b */,
 175         HAL_TQM_FLOW_EMPTY_STATUS              = 124 /* 0x7c */,
 176         HAL_TQM_FLOW_NOT_EMPTY_STATUS          = 125 /* 0x7d */,
 177         HAL_TQM_GEN_MPDU_LENGTH_LIST           = 126 /* 0x7e */,
 178         HAL_TQM_GEN_MPDU_LENGTH_LIST_STATUS    = 127 /* 0x7f */,
 179         HAL_TQM_GEN_MPDUS                      = 128 /* 0x80 */,
 180         HAL_TQM_GEN_MPDUS_STATUS               = 129 /* 0x81 */,
 181         HAL_TQM_REMOVE_MPDU                    = 130 /* 0x82 */,
 182         HAL_TQM_REMOVE_MPDU_STATUS             = 131 /* 0x83 */,
 183         HAL_TQM_REMOVE_MSDU                    = 132 /* 0x84 */,
 184         HAL_TQM_REMOVE_MSDU_STATUS             = 133 /* 0x85 */,
 185         HAL_TQM_UPDATE_TX_MPDU_COUNT           = 134 /* 0x86 */,
 186         HAL_TQM_WRITE_CMD                      = 135 /* 0x87 */,
 187         HAL_OFDMA_TRIGGER_DETAILS              = 136 /* 0x88 */,
 188         HAL_TX_DATA                            = 137 /* 0x89 */,
 189         HAL_TX_FES_SETUP                       = 138 /* 0x8a */,
 190         HAL_RX_PACKET                          = 139 /* 0x8b */,
 191         HAL_EXPECTED_RESPONSE                  = 140 /* 0x8c */,
 192         HAL_TX_MPDU_END                        = 141 /* 0x8d */,
 193         HAL_TX_MPDU_START                      = 142 /* 0x8e */,
 194         HAL_TX_MSDU_END                        = 143 /* 0x8f */,
 195         HAL_TX_MSDU_START                      = 144 /* 0x90 */,
 196         HAL_TX_SW_MODE_SETUP                   = 145 /* 0x91 */,
 197         HAL_TXPCU_BUFFER_STATUS                = 146 /* 0x92 */,
 198         HAL_TXPCU_USER_BUFFER_STATUS           = 147 /* 0x93 */,
 199         HAL_DATA_TO_TIME_CONFIG                = 148 /* 0x94 */,
 200         HAL_EXAMPLE_USER_TLV_32                = 149 /* 0x95 */,
 201         HAL_MPDU_INFO                          = 150 /* 0x96 */,
 202         HAL_PDG_USER_SETUP                     = 151 /* 0x97 */,
 203         HAL_TX_11AH_SETUP                      = 152 /* 0x98 */,
 204         HAL_REO_UPDATE_RX_REO_QUEUE_STATUS     = 153 /* 0x99 */,
 205         HAL_TX_PEER_ENTRY                      = 154 /* 0x9a */,
 206         HAL_TX_RAW_OR_NATIVE_FRAME_SETUP       = 155 /* 0x9b */,
 207         HAL_EXAMPLE_STRUCT_NAME                = 156 /* 0x9c */,
 208         HAL_PCU_PPDU_SETUP_END_INFO            = 157 /* 0x9d */,
 209         HAL_PPDU_RATE_SETTING                  = 158 /* 0x9e */,
 210         HAL_PROT_RATE_SETTING                  = 159 /* 0x9f */,
 211         HAL_RX_MPDU_DETAILS                    = 160 /* 0xa0 */,
 212         HAL_EXAMPLE_USER_TLV_42                = 161 /* 0xa1 */,
 213         HAL_RX_MSDU_LINK                       = 162 /* 0xa2 */,
 214         HAL_RX_REO_QUEUE                       = 163 /* 0xa3 */,
 215         HAL_ADDR_SEARCH_ENTRY                  = 164 /* 0xa4 */,
 216         HAL_SCHEDULER_CMD                      = 165 /* 0xa5 */,
 217         HAL_TX_FLUSH                           = 166 /* 0xa6 */,
 218         HAL_TQM_ENTRANCE_RING                  = 167 /* 0xa7 */,
 219         HAL_TX_DATA_WORD                       = 168 /* 0xa8 */,
 220         HAL_TX_MPDU_DETAILS                    = 169 /* 0xa9 */,
 221         HAL_TX_MPDU_LINK                       = 170 /* 0xaa */,
 222         HAL_TX_MPDU_LINK_PTR                   = 171 /* 0xab */,
 223         HAL_TX_MPDU_QUEUE_HEAD                 = 172 /* 0xac */,
 224         HAL_TX_MPDU_QUEUE_EXT                  = 173 /* 0xad */,
 225         HAL_TX_MPDU_QUEUE_EXT_PTR              = 174 /* 0xae */,
 226         HAL_TX_MSDU_DETAILS                    = 175 /* 0xaf */,
 227         HAL_TX_MSDU_EXTENSION                  = 176 /* 0xb0 */,
 228         HAL_TX_MSDU_FLOW                       = 177 /* 0xb1 */,
 229         HAL_TX_MSDU_LINK                       = 178 /* 0xb2 */,
 230         HAL_TX_MSDU_LINK_ENTRY_PTR             = 179 /* 0xb3 */,
 231         HAL_RESPONSE_RATE_SETTING              = 180 /* 0xb4 */,
 232         HAL_TXPCU_BUFFER_BASICS                = 181 /* 0xb5 */,
 233         HAL_UNIFORM_DESCRIPTOR_HEADER          = 182 /* 0xb6 */,
 234         HAL_UNIFORM_TQM_CMD_HEADER             = 183 /* 0xb7 */,
 235         HAL_UNIFORM_TQM_STATUS_HEADER          = 184 /* 0xb8 */,
 236         HAL_USER_RATE_SETTING                  = 185 /* 0xb9 */,
 237         HAL_WBM_BUFFER_RING                    = 186 /* 0xba */,
 238         HAL_WBM_LINK_DESCRIPTOR_RING           = 187 /* 0xbb */,
 239         HAL_WBM_RELEASE_RING                   = 188 /* 0xbc */,
 240         HAL_TX_FLUSH_REQ                       = 189 /* 0xbd */,
 241         HAL_RX_MSDU_DETAILS                    = 190 /* 0xbe */,
 242         HAL_TQM_WRITE_CMD_STATUS               = 191 /* 0xbf */,
 243         HAL_TQM_GET_MPDU_QUEUE_STATS           = 192 /* 0xc0 */,
 244         HAL_TQM_GET_MSDU_FLOW_STATS            = 193 /* 0xc1 */,
 245         HAL_EXAMPLE_USER_CTLV_32               = 194 /* 0xc2 */,
 246         HAL_TX_FES_STATUS_START                = 195 /* 0xc3 */,
 247         HAL_TX_FES_STATUS_USER_PPDU            = 196 /* 0xc4 */,
 248         HAL_TX_FES_STATUS_USER_RESPONSE        = 197 /* 0xc5 */,
 249         HAL_TX_FES_STATUS_END                  = 198 /* 0xc6 */,
 250         HAL_RX_TRIG_INFO                       = 199 /* 0xc7 */,
 251         HAL_RXPCU_TX_SETUP_CLEAR               = 200 /* 0xc8 */,
 252         HAL_RX_FRAME_BITMAP_REQ                = 201 /* 0xc9 */,
 253         HAL_RX_FRAME_BITMAP_ACK                = 202 /* 0xca */,
 254         HAL_COEX_RX_STATUS                     = 203 /* 0xcb */,
 255         HAL_RX_START_PARAM                     = 204 /* 0xcc */,
 256         HAL_RX_PPDU_START                      = 205 /* 0xcd */,
 257         HAL_RX_PPDU_END                        = 206 /* 0xce */,
 258         HAL_RX_MPDU_START                      = 207 /* 0xcf */,
 259         HAL_RX_MPDU_END                        = 208 /* 0xd0 */,
 260         HAL_RX_MSDU_START                      = 209 /* 0xd1 */,
 261         HAL_RX_MSDU_END                        = 210 /* 0xd2 */,
 262         HAL_RX_ATTENTION                       = 211 /* 0xd3 */,
 263         HAL_RECEIVED_RESPONSE_INFO             = 212 /* 0xd4 */,
 264         HAL_RX_PHY_SLEEP                       = 213 /* 0xd5 */,
 265         HAL_RX_HEADER                          = 214 /* 0xd6 */,
 266         HAL_RX_PEER_ENTRY                      = 215 /* 0xd7 */,
 267         HAL_RX_FLUSH                           = 216 /* 0xd8 */,
 268         HAL_RX_RESPONSE_REQUIRED_INFO          = 217 /* 0xd9 */,
 269         HAL_RX_FRAMELESS_BAR_DETAILS           = 218 /* 0xda */,
 270         HAL_TQM_GET_MPDU_QUEUE_STATS_STATUS    = 219 /* 0xdb */,
 271         HAL_TQM_GET_MSDU_FLOW_STATS_STATUS     = 220 /* 0xdc */,
 272         HAL_TX_CBF_INFO                        = 221 /* 0xdd */,
 273         HAL_PCU_PPDU_SETUP_USER                = 222 /* 0xde */,
 274         HAL_RX_MPDU_PCU_START                  = 223 /* 0xdf */,
 275         HAL_RX_PM_INFO                         = 224 /* 0xe0 */,
 276         HAL_RX_USER_PPDU_END                   = 225 /* 0xe1 */,
 277         HAL_RX_PRE_PPDU_START                  = 226 /* 0xe2 */,
 278         HAL_RX_PREAMBLE                        = 227 /* 0xe3 */,
 279         HAL_TX_FES_SETUP_COMPLETE              = 228 /* 0xe4 */,
 280         HAL_TX_LAST_MPDU_FETCHED               = 229 /* 0xe5 */,
 281         HAL_TXDMA_STOP_REQUEST                 = 230 /* 0xe6 */,
 282         HAL_RXPCU_SETUP                        = 231 /* 0xe7 */,
 283         HAL_RXPCU_USER_SETUP                   = 232 /* 0xe8 */,
 284         HAL_TX_FES_STATUS_ACK_OR_BA            = 233 /* 0xe9 */,
 285         HAL_TQM_ACKED_MPDU                     = 234 /* 0xea */,
 286         HAL_COEX_TX_RESP                       = 235 /* 0xeb */,
 287         HAL_COEX_TX_STATUS                     = 236 /* 0xec */,
 288         HAL_MACTX_COEX_PHY_CTRL                = 237 /* 0xed */,
 289         HAL_COEX_STATUS_BROADCAST              = 238 /* 0xee */,
 290         HAL_RESPONSE_START_STATUS              = 239 /* 0xef */,
 291         HAL_RESPONSE_END_STATUS                = 240 /* 0xf0 */,
 292         HAL_CRYPTO_STATUS                      = 241 /* 0xf1 */,
 293         HAL_RECEIVED_TRIGGER_INFO              = 242 /* 0xf2 */,
 294         HAL_REO_ENTRANCE_RING                  = 243 /* 0xf3 */,
 295         HAL_RX_MPDU_LINK                       = 244 /* 0xf4 */,
 296         HAL_COEX_TX_STOP_CTRL                  = 245 /* 0xf5 */,
 297         HAL_RX_PPDU_ACK_REPORT                 = 246 /* 0xf6 */,
 298         HAL_RX_PPDU_NO_ACK_REPORT              = 247 /* 0xf7 */,
 299         HAL_SCH_COEX_STATUS                    = 248 /* 0xf8 */,
 300         HAL_SCHEDULER_COMMAND_STATUS           = 249 /* 0xf9 */,
 301         HAL_SCHEDULER_RX_PPDU_NO_RESPONSE_STATUS = 250 /* 0xfa */,
 302         HAL_TX_FES_STATUS_PROT                 = 251 /* 0xfb */,
 303         HAL_TX_FES_STATUS_START_PPDU           = 252 /* 0xfc */,
 304         HAL_TX_FES_STATUS_START_PROT           = 253 /* 0xfd */,
 305         HAL_TXPCU_PHYTX_DEBUG32                = 254 /* 0xfe */,
 306         HAL_TXPCU_PHYTX_OTHER_TRANSMIT_INFO32  = 255 /* 0xff */,
 307         HAL_TX_MPDU_COUNT_TRANSFER_END         = 256 /* 0x100 */,
 308         HAL_WHO_ANCHOR_OFFSET                  = 257 /* 0x101 */,
 309         HAL_WHO_ANCHOR_VALUE                   = 258 /* 0x102 */,
 310         HAL_WHO_CCE_INFO                       = 259 /* 0x103 */,
 311         HAL_WHO_COMMIT                         = 260 /* 0x104 */,
 312         HAL_WHO_COMMIT_DONE                    = 261 /* 0x105 */,
 313         HAL_WHO_FLUSH                          = 262 /* 0x106 */,
 314         HAL_WHO_L2_LLC                         = 263 /* 0x107 */,
 315         HAL_WHO_L2_PAYLOAD                     = 264 /* 0x108 */,
 316         HAL_WHO_L3_CHECKSUM                    = 265 /* 0x109 */,
 317         HAL_WHO_L3_INFO                        = 266 /* 0x10a */,
 318         HAL_WHO_L4_CHECKSUM                    = 267 /* 0x10b */,
 319         HAL_WHO_L4_INFO                        = 268 /* 0x10c */,
 320         HAL_WHO_MSDU                           = 269 /* 0x10d */,
 321         HAL_WHO_MSDU_MISC                      = 270 /* 0x10e */,
 322         HAL_WHO_PACKET_DATA                    = 271 /* 0x10f */,
 323         HAL_WHO_PACKET_HDR                     = 272 /* 0x110 */,
 324         HAL_WHO_PPDU_END                       = 273 /* 0x111 */,
 325         HAL_WHO_PPDU_START                     = 274 /* 0x112 */,
 326         HAL_WHO_TSO                            = 275 /* 0x113 */,
 327         HAL_WHO_WMAC_HEADER_PV0                = 276 /* 0x114 */,
 328         HAL_WHO_WMAC_HEADER_PV1                = 277 /* 0x115 */,
 329         HAL_WHO_WMAC_IV                        = 278 /* 0x116 */,
 330         HAL_MPDU_INFO_END                      = 279 /* 0x117 */,
 331         HAL_MPDU_INFO_BITMAP                   = 280 /* 0x118 */,
 332         HAL_TX_QUEUE_EXTENSION                 = 281 /* 0x119 */,
 333         HAL_RX_PEER_ENTRY_DETAILS              = 282 /* 0x11a */,
 334         HAL_RX_REO_QUEUE_REFERENCE             = 283 /* 0x11b */,
 335         HAL_RX_REO_QUEUE_EXT                   = 284 /* 0x11c */,
 336         HAL_SCHEDULER_SELFGEN_RESPONSE_STATUS  = 285 /* 0x11d */,
 337         HAL_TQM_UPDATE_TX_MPDU_COUNT_STATUS    = 286 /* 0x11e */,
 338         HAL_TQM_ACKED_MPDU_STATUS              = 287 /* 0x11f */,
 339         HAL_TQM_ADD_MSDU_STATUS                = 288 /* 0x120 */,
 340         HAL_RX_MPDU_LINK_PTR                   = 289 /* 0x121 */,
 341         HAL_REO_DESTINATION_RING               = 290 /* 0x122 */,
 342         HAL_TQM_LIST_GEN_DONE                  = 291 /* 0x123 */,
 343         HAL_WHO_TERMINATE                      = 292 /* 0x124 */,
 344         HAL_TX_LAST_MPDU_END                   = 293 /* 0x125 */,
 345         HAL_TX_CV_DATA                         = 294 /* 0x126 */,
 346         HAL_TCL_ENTRANCE_FROM_PPE_RING         = 295 /* 0x127 */,
 347         HAL_PPDU_TX_END                        = 296 /* 0x128 */,
 348         HAL_PROT_TX_END                        = 297 /* 0x129 */,
 349         HAL_PDG_RESPONSE_RATE_SETTING          = 298 /* 0x12a */,
 350         HAL_MPDU_INFO_GLOBAL_END               = 299 /* 0x12b */,
 351         HAL_TQM_SCH_INSTR_GLOBAL_END           = 300 /* 0x12c */,
 352         HAL_RX_PPDU_END_USER_STATS             = 301 /* 0x12d */,
 353         HAL_RX_PPDU_END_USER_STATS_EXT         = 302 /* 0x12e */,
 354         HAL_NO_ACK_REPORT                      = 303 /* 0x12f */,
 355         HAL_ACK_REPORT                         = 304 /* 0x130 */,
 356         HAL_UNIFORM_REO_CMD_HEADER             = 305 /* 0x131 */,
 357         HAL_REO_GET_QUEUE_STATS                = 306 /* 0x132 */,
 358         HAL_REO_FLUSH_QUEUE                    = 307 /* 0x133 */,
 359         HAL_REO_FLUSH_CACHE                    = 308 /* 0x134 */,
 360         HAL_REO_UNBLOCK_CACHE                  = 309 /* 0x135 */,
 361         HAL_UNIFORM_REO_STATUS_HEADER          = 310 /* 0x136 */,
 362         HAL_REO_GET_QUEUE_STATS_STATUS         = 311 /* 0x137 */,
 363         HAL_REO_FLUSH_QUEUE_STATUS             = 312 /* 0x138 */,
 364         HAL_REO_FLUSH_CACHE_STATUS             = 313 /* 0x139 */,
 365         HAL_REO_UNBLOCK_CACHE_STATUS           = 314 /* 0x13a */,
 366         HAL_TQM_FLUSH_CACHE                    = 315 /* 0x13b */,
 367         HAL_TQM_UNBLOCK_CACHE                  = 316 /* 0x13c */,
 368         HAL_TQM_FLUSH_CACHE_STATUS             = 317 /* 0x13d */,
 369         HAL_TQM_UNBLOCK_CACHE_STATUS           = 318 /* 0x13e */,
 370         HAL_RX_PPDU_END_STATUS_DONE            = 319 /* 0x13f */,
 371         HAL_RX_STATUS_BUFFER_DONE              = 320 /* 0x140 */,
 372         HAL_BUFFER_ADDR_INFO                   = 321 /* 0x141 */,
 373         HAL_RX_MSDU_DESC_INFO                  = 322 /* 0x142 */,
 374         HAL_RX_MPDU_DESC_INFO                  = 323 /* 0x143 */,
 375         HAL_TCL_DATA_CMD                       = 324 /* 0x144 */,
 376         HAL_TCL_GSE_CMD                        = 325 /* 0x145 */,
 377         HAL_TCL_EXIT_BASE                      = 326 /* 0x146 */,
 378         HAL_TCL_COMPACT_EXIT_RING              = 327 /* 0x147 */,
 379         HAL_TCL_REGULAR_EXIT_RING              = 328 /* 0x148 */,
 380         HAL_TCL_EXTENDED_EXIT_RING             = 329 /* 0x149 */,
 381         HAL_UPLINK_COMMON_INFO                 = 330 /* 0x14a */,
 382         HAL_UPLINK_USER_SETUP_INFO             = 331 /* 0x14b */,
 383         HAL_TX_DATA_SYNC                       = 332 /* 0x14c */,
 384         HAL_PHYRX_CBF_READ_REQUEST_ACK         = 333 /* 0x14d */,
 385         HAL_TCL_STATUS_RING                    = 334 /* 0x14e */,
 386         HAL_TQM_GET_MPDU_HEAD_INFO             = 335 /* 0x14f */,
 387         HAL_TQM_SYNC_CMD                       = 336 /* 0x150 */,
 388         HAL_TQM_GET_MPDU_HEAD_INFO_STATUS      = 337 /* 0x151 */,
 389         HAL_TQM_SYNC_CMD_STATUS                = 338 /* 0x152 */,
 390         HAL_TQM_THRESHOLD_DROP_NOTIFICATION_STATUS = 339 /* 0x153 */,
 391         HAL_TQM_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 340 /* 0x154 */,
 392         HAL_REO_FLUSH_TIMEOUT_LIST             = 341 /* 0x155 */,
 393         HAL_REO_FLUSH_TIMEOUT_LIST_STATUS      = 342 /* 0x156 */,
 394         HAL_REO_TO_PPE_RING                    = 343 /* 0x157 */,
 395         HAL_RX_MPDU_INFO                       = 344 /* 0x158 */,
 396         HAL_REO_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 345 /* 0x159 */,
 397         HAL_SCHEDULER_RX_SIFS_RESPONSE_TRIGGER_STATUS = 346 /* 0x15a */,
 398         HAL_EXAMPLE_USER_TLV_32_NAME           = 347 /* 0x15b */,
 399         HAL_RX_PPDU_START_USER_INFO            = 348 /* 0x15c */,
 400         HAL_RX_RXPCU_CLASSIFICATION_OVERVIEW   = 349 /* 0x15d */,
 401         HAL_RX_RING_MASK                       = 350 /* 0x15e */,
 402         HAL_WHO_CLASSIFY_INFO                  = 351 /* 0x15f */,
 403         HAL_TXPT_CLASSIFY_INFO                 = 352 /* 0x160 */,
 404         HAL_RXPT_CLASSIFY_INFO                 = 353 /* 0x161 */,
 405         HAL_TX_FLOW_SEARCH_ENTRY               = 354 /* 0x162 */,
 406         HAL_RX_FLOW_SEARCH_ENTRY               = 355 /* 0x163 */,
 407         HAL_RECEIVED_TRIGGER_INFO_DETAILS      = 356 /* 0x164 */,
 408         HAL_COEX_MAC_NAP                       = 357 /* 0x165 */,
 409         HAL_MACRX_ABORT_REQUEST_INFO           = 358 /* 0x166 */,
 410         HAL_MACTX_ABORT_REQUEST_INFO           = 359 /* 0x167 */,
 411         HAL_PHYRX_ABORT_REQUEST_INFO           = 360 /* 0x168 */,
 412         HAL_PHYTX_ABORT_REQUEST_INFO           = 361 /* 0x169 */,
 413         HAL_RXPCU_PPDU_END_INFO                = 362 /* 0x16a */,
 414         HAL_WHO_MESH_CONTROL                   = 363 /* 0x16b */,
 415         HAL_L_SIG_A_INFO                       = 364 /* 0x16c */,
 416         HAL_L_SIG_B_INFO                       = 365 /* 0x16d */,
 417         HAL_HT_SIG_INFO                        = 366 /* 0x16e */,
 418         HAL_VHT_SIG_A_INFO                     = 367 /* 0x16f */,
 419         HAL_VHT_SIG_B_SU20_INFO                = 368 /* 0x170 */,
 420         HAL_VHT_SIG_B_SU40_INFO                = 369 /* 0x171 */,
 421         HAL_VHT_SIG_B_SU80_INFO                = 370 /* 0x172 */,
 422         HAL_VHT_SIG_B_SU160_INFO               = 371 /* 0x173 */,
 423         HAL_VHT_SIG_B_MU20_INFO                = 372 /* 0x174 */,
 424         HAL_VHT_SIG_B_MU40_INFO                = 373 /* 0x175 */,
 425         HAL_VHT_SIG_B_MU80_INFO                = 374 /* 0x176 */,
 426         HAL_VHT_SIG_B_MU160_INFO               = 375 /* 0x177 */,
 427         HAL_SERVICE_INFO                       = 376 /* 0x178 */,
 428         HAL_HE_SIG_A_SU_INFO                   = 377 /* 0x179 */,
 429         HAL_HE_SIG_A_MU_DL_INFO                = 378 /* 0x17a */,
 430         HAL_HE_SIG_A_MU_UL_INFO                = 379 /* 0x17b */,
 431         HAL_HE_SIG_B1_MU_INFO                  = 380 /* 0x17c */,
 432         HAL_HE_SIG_B2_MU_INFO                  = 381 /* 0x17d */,
 433         HAL_HE_SIG_B2_OFDMA_INFO               = 382 /* 0x17e */,
 434         HAL_PDG_SW_MODE_BW_START               = 383 /* 0x17f */,
 435         HAL_PDG_SW_MODE_BW_END                 = 384 /* 0x180 */,
 436         HAL_PDG_WAIT_FOR_MAC_REQUEST           = 385 /* 0x181 */,
 437         HAL_PDG_WAIT_FOR_PHY_REQUEST           = 386 /* 0x182 */,
 438         HAL_SCHEDULER_END                      = 387 /* 0x183 */,
 439         HAL_PEER_TABLE_ENTRY                   = 388 /* 0x184 */,
 440         HAL_SW_PEER_INFO                       = 389 /* 0x185 */,
 441         HAL_RXOLE_CCE_CLASSIFY_INFO            = 390 /* 0x186 */,
 442         HAL_TCL_CCE_CLASSIFY_INFO              = 391 /* 0x187 */,
 443         HAL_RXOLE_CCE_INFO                     = 392 /* 0x188 */,
 444         HAL_TCL_CCE_INFO                       = 393 /* 0x189 */,
 445         HAL_TCL_CCE_SUPERRULE                  = 394 /* 0x18a */,
 446         HAL_CCE_RULE                           = 395 /* 0x18b */,
 447         HAL_RX_PPDU_START_DROPPED              = 396 /* 0x18c */,
 448         HAL_RX_PPDU_END_DROPPED                = 397 /* 0x18d */,
 449         HAL_RX_PPDU_END_STATUS_DONE_DROPPED    = 398 /* 0x18e */,
 450         HAL_RX_MPDU_START_DROPPED              = 399 /* 0x18f */,
 451         HAL_RX_MSDU_START_DROPPED              = 400 /* 0x190 */,
 452         HAL_RX_MSDU_END_DROPPED                = 401 /* 0x191 */,
 453         HAL_RX_MPDU_END_DROPPED                = 402 /* 0x192 */,
 454         HAL_RX_ATTENTION_DROPPED               = 403 /* 0x193 */,
 455         HAL_TXPCU_USER_SETUP                   = 404 /* 0x194 */,
 456         HAL_RXPCU_USER_SETUP_EXT               = 405 /* 0x195 */,
 457         HAL_CE_SRC_DESC                        = 406 /* 0x196 */,
 458         HAL_CE_STAT_DESC                       = 407 /* 0x197 */,
 459         HAL_RXOLE_CCE_SUPERRULE                = 408 /* 0x198 */,
 460         HAL_TX_RATE_STATS_INFO                 = 409 /* 0x199 */,
 461         HAL_CMD_PART_0_END                     = 410 /* 0x19a */,
 462         HAL_MACTX_SYNTH_ON                     = 411 /* 0x19b */,
 463         HAL_SCH_CRITICAL_TLV_REFERENCE         = 412 /* 0x19c */,
 464         HAL_TQM_MPDU_GLOBAL_START              = 413 /* 0x19d */,
 465         HAL_EXAMPLE_TLV_32                     = 414 /* 0x19e */,
 466         HAL_TQM_UPDATE_TX_MSDU_FLOW            = 415 /* 0x19f */,
 467         HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD      = 416 /* 0x1a0 */,
 468         HAL_TQM_UPDATE_TX_MSDU_FLOW_STATUS     = 417 /* 0x1a1 */,
 469         HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD_STATUS = 418 /* 0x1a2 */,
 470         HAL_REO_UPDATE_RX_REO_QUEUE            = 419 /* 0x1a3 */,
 471         HAL_CE_DST_DESC                        = 420 /* 0x1a4 */,
 472         HAL_TLV_BASE                           = 511 /* 0x1ff */,
 473 };
 474
 475 #define HAL_TLV_HDR_TAG         GENMASK(9, 1)
 476 #define HAL_TLV_HDR_LEN         GENMASK(25, 10)
 477 #define HAL_TLV_USR_ID          GENMASK(31, 26)
 478
 479 #define HAL_TLV_ALIGN   4
 480
 481 struct hal_tlv_hdr {
 482         u32 tl;
 483         u8 value[];
 484 } __packed;
 485
 486 #define RX_MPDU_DESC_INFO0_MSDU_COUNT           GENMASK(7, 0)
 487 #define RX_MPDU_DESC_INFO0_SEQ_NUM              GENMASK(19, 8)
 488 #define RX_MPDU_DESC_INFO0_FRAG_FLAG            BIT(20)
 489 #define RX_MPDU_DESC_INFO0_MPDU_RETRY           BIT(21)
 490 #define RX_MPDU_DESC_INFO0_AMPDU_FLAG           BIT(22)
 491 #define RX_MPDU_DESC_INFO0_BAR_FRAME            BIT(23)
 492 #define RX_MPDU_DESC_INFO0_VALID_PN             BIT(24)
 493 #define RX_MPDU_DESC_INFO0_VALID_SA             BIT(25)
 494 #define RX_MPDU_DESC_INFO0_SA_IDX_TIMEOUT       BIT(26)
 495 #define RX_MPDU_DESC_INFO0_VALID_DA             BIT(27)
 496 #define RX_MPDU_DESC_INFO0_DA_MCBC              BIT(28)
 497 #define RX_MPDU_DESC_INFO0_DA_IDX_TIMEOUT       BIT(29)
 498 #define RX_MPDU_DESC_INFO0_RAW_MPDU             BIT(30)
 499
 500 #define RX_MPDU_DESC_META_DATA_PEER_ID          GENMASK(15, 0)
 501
 502 struct rx_mpdu_desc {
 503         u32 info0; /* %RX_MPDU_DESC_INFO */
 504         u32 meta_data;
 505 } __packed;
 506
 507 /* rx_mpdu_desc
 508  *              Producer: RXDMA
 509  *              Consumer: REO/SW/FW
 510  *
 511  * msdu_count
 512  *              The number of MSDUs within the MPDU
 513  *
 514  * mpdu_sequence_number
 515  *              The field can have two different meanings based on the setting
 516  *              of field 'bar_frame'. If 'bar_frame' is set, it means the MPDU
 517  *              start sequence number from the BAR frame otherwise it means
 518  *              the MPDU sequence number of the received frame.
 519  *
 520  * fragment_flag
 521  *              When set, this MPDU is a fragment and REO should forward this
 522  *              fragment MPDU to the REO destination ring without any reorder
 523  *              checks, pn checks or bitmap update. This implies that REO is
 524  *              forwarding the pointer to the MSDU link descriptor.
 525  *
 526  * mpdu_retry_bit
 527  *              The retry bit setting from the MPDU header of the received frame
 528  *
 529  * ampdu_flag
 530  *              Indicates the MPDU was received as part of an A-MPDU.
 531  *
 532  * bar_frame
 533  *              Indicates the received frame is a BAR frame. After processing,
 534  *              this frame shall be pushed to SW or deleted.
 535  *
 536  * valid_pn
 537  *              When not set, REO will not perform a PN sequence number check.
 538  *
 539  * valid_sa
 540  *              Indicates OLE found a valid SA entry for all MSDUs in this MPDU.
 541  *
 542  * sa_idx_timeout
 543  *              Indicates, at least 1 MSDU within the MPDU has an unsuccessful
 544  *              MAC source address search due to the expiration of search timer.
 545  *
 546  * valid_da
 547  *              When set, OLE found a valid DA entry for all MSDUs in this MPDU.
 548  *
 549  * da_mcbc
 550  *              Field Only valid if valid_da is set. Indicates at least one of
 551  *              the DA addresses is a Multicast or Broadcast address.
 552  *
 553  * da_idx_timeout
 554  *              Indicates, at least 1 MSDU within the MPDU has an unsuccessful
 555  *              MAC destination address search due to the expiration of search
 556  *              timer.
 557  *
 558  * raw_mpdu
 559  *              Field only valid when first_msdu_in_mpdu_flag is set. Indicates
 560  *              the contents in the MSDU buffer contains a 'RAW' MPDU.
 561  */
 562
 563 enum hal_rx_msdu_desc_reo_dest_ind {
 564         HAL_RX_MSDU_DESC_REO_DEST_IND_TCL,
 565         HAL_RX_MSDU_DESC_REO_DEST_IND_SW1,
 566         HAL_RX_MSDU_DESC_REO_DEST_IND_SW2,
 567         HAL_RX_MSDU_DESC_REO_DEST_IND_SW3,
 568         HAL_RX_MSDU_DESC_REO_DEST_IND_SW4,
 569         HAL_RX_MSDU_DESC_REO_DEST_IND_RELEASE,
 570         HAL_RX_MSDU_DESC_REO_DEST_IND_FW,
 571 };
 572
 573 #define RX_MSDU_DESC_INFO0_FIRST_MSDU_IN_MPDU   BIT(0)
 574 #define RX_MSDU_DESC_INFO0_LAST_MSDU_IN_MPDU    BIT(1)
 575 #define RX_MSDU_DESC_INFO0_MSDU_CONTINUATION    BIT(2)
 576 #define RX_MSDU_DESC_INFO0_MSDU_LENGTH          GENMASK(16, 3)
 577 #define RX_MSDU_DESC_INFO0_REO_DEST_IND         GENMASK(21, 17)
 578 #define RX_MSDU_DESC_INFO0_MSDU_DROP            BIT(22)
 579 #define RX_MSDU_DESC_INFO0_VALID_SA             BIT(23)
 580 #define RX_MSDU_DESC_INFO0_SA_IDX_TIMEOUT       BIT(24)
 581 #define RX_MSDU_DESC_INFO0_VALID_DA             BIT(25)
 582 #define RX_MSDU_DESC_INFO0_DA_MCBC              BIT(26)
 583 #define RX_MSDU_DESC_INFO0_DA_IDX_TIMEOUT       BIT(27)
 584
 585 #define HAL_RX_MSDU_PKT_LENGTH_GET(val)         \
 586         (FIELD_GET(RX_MSDU_DESC_INFO0_MSDU_LENGTH, (val)))
 587
 588 struct rx_msdu_desc {
 589         u32 info0;
 590         u32 rsvd0;
 591 } __packed;
 592
 593 /* rx_msdu_desc
 594  *
 595  * first_msdu_in_mpdu
 596  *              Indicates first msdu in mpdu.
 597  *
 598  * last_msdu_in_mpdu
 599  *              Indicates last msdu in mpdu. This flag can be true only when
 600  *              'Msdu_continuation' set to 0. This implies that when an msdu
 601  *              is spread out over multiple buffers and thus msdu_continuation
 602  *              is set, only for the very last buffer of the msdu, can the
 603  *              'last_msdu_in_mpdu' be set.
 604  *
 605  *              When both first_msdu_in_mpdu and last_msdu_in_mpdu are set,
 606  *              the MPDU that this MSDU belongs to only contains a single MSDU.
 607  *
 608  * msdu_continuation
 609  *              When set, this MSDU buffer was not able to hold the entire MSDU.
 610  *              The next buffer will therefore contain additional information
 611  *              related to this MSDU.
 612  *
 613  * msdu_length
 614  *              Field is only valid in combination with the 'first_msdu_in_mpdu'
 615  *              being set. Full MSDU length in bytes after decapsulation. This
 616  *              field is still valid for MPDU frames without A-MSDU. It still
 617  *              represents MSDU length after decapsulation Or in case of RAW
 618  *              MPDUs, it indicates the length of the entire MPDU (without FCS
 619  *              field).
 620  *
 621  * reo_destination_indication
 622  *              The id of the reo exit ring where the msdu frame shall push
 623  *              after (MPDU level) reordering has finished. Values are defined
 624  *              in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_.
 625  *
 626  * msdu_drop
 627  *              Indicates that REO shall drop this MSDU and not forward it to
 628  *              any other ring.
 629  *
 630  * valid_sa
 631  *              Indicates OLE found a valid SA entry for this MSDU.
 632  *
 633  * sa_idx_timeout
 634  *              Indicates, an unsuccessful MAC source address search due to
 635  *              the expiration of search timer for this MSDU.
 636  *
 637  * valid_da
 638  *              When set, OLE found a valid DA entry for this MSDU.
 639  *
 640  * da_mcbc
 641  *              Field Only valid if valid_da is set. Indicates the DA address
 642  *              is a Multicast or Broadcast address for this MSDU.
 643  *
 644  * da_idx_timeout
 645  *              Indicates, an unsuccessful MAC destination address search due
 646  *              to the expiration of search timer for this MSDU.
 647  */
 648
 649 enum hal_reo_dest_ring_buffer_type {
 650         HAL_REO_DEST_RING_BUFFER_TYPE_MSDU,
 651         HAL_REO_DEST_RING_BUFFER_TYPE_LINK_DESC,
 652 };
 653
 654 enum hal_reo_dest_ring_push_reason {
 655         HAL_REO_DEST_RING_PUSH_REASON_ERR_DETECTED,
 656         HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION,
 657 };
 658
 659 enum hal_reo_dest_ring_error_code {
 660         HAL_REO_DEST_RING_ERROR_CODE_DESC_ADDR_ZERO,
 661         HAL_REO_DEST_RING_ERROR_CODE_DESC_INVALID,
 662         HAL_REO_DEST_RING_ERROR_CODE_AMPDU_IN_NON_BA,
 663         HAL_REO_DEST_RING_ERROR_CODE_NON_BA_DUPLICATE,
 664         HAL_REO_DEST_RING_ERROR_CODE_BA_DUPLICATE,
 665         HAL_REO_DEST_RING_ERROR_CODE_FRAME_2K_JUMP,
 666         HAL_REO_DEST_RING_ERROR_CODE_BAR_2K_JUMP,
 667         HAL_REO_DEST_RING_ERROR_CODE_FRAME_OOR,
 668         HAL_REO_DEST_RING_ERROR_CODE_BAR_OOR,
 669         HAL_REO_DEST_RING_ERROR_CODE_NO_BA_SESSION,
 670         HAL_REO_DEST_RING_ERROR_CODE_FRAME_SN_EQUALS_SSN,
 671         HAL_REO_DEST_RING_ERROR_CODE_PN_CHECK_FAILED,
 672         HAL_REO_DEST_RING_ERROR_CODE_2K_ERR_FLAG_SET,
 673         HAL_REO_DEST_RING_ERROR_CODE_PN_ERR_FLAG_SET,
 674         HAL_REO_DEST_RING_ERROR_CODE_DESC_BLOCKED,
 675         HAL_REO_DEST_RING_ERROR_CODE_MAX,
 676 };
 677
 678 #define HAL_REO_DEST_RING_INFO0_QUEUE_ADDR_HI           GENMASK(7, 0)
 679 #define HAL_REO_DEST_RING_INFO0_BUFFER_TYPE             BIT(8)
 680 #define HAL_REO_DEST_RING_INFO0_PUSH_REASON             GENMASK(10, 9)
 681 #define HAL_REO_DEST_RING_INFO0_ERROR_CODE              GENMASK(15, 11)
 682 #define HAL_REO_DEST_RING_INFO0_RX_QUEUE_NUM            GENMASK(31, 16)
 683
 684 #define HAL_REO_DEST_RING_INFO1_REORDER_INFO_VALID      BIT(0)
 685 #define HAL_REO_DEST_RING_INFO1_REORDER_OPCODE          GENMASK(4, 1)
 686 #define HAL_REO_DEST_RING_INFO1_REORDER_SLOT_IDX        GENMASK(12, 5)
 687
 688 #define HAL_REO_DEST_RING_INFO2_RING_ID                 GENMASK(27, 20)
 689 #define HAL_REO_DEST_RING_INFO2_LOOPING_COUNT           GENMASK(31, 28)
 690
 691 struct hal_reo_dest_ring {
 692         struct ath11k_buffer_addr buf_addr_info;
 693         struct rx_mpdu_desc rx_mpdu_info;
 694         struct rx_msdu_desc rx_msdu_info;
 695         u32 queue_addr_lo;
 696         u32 info0; /* %HAL_REO_DEST_RING_INFO0_ */
 697         u32 info1; /* %HAL_REO_DEST_RING_INFO1_ */
 698         u32 rsvd0;
 699         u32 rsvd1;
 700         u32 rsvd2;
 701         u32 rsvd3;
 702         u32 rsvd4;
 703         u32 rsvd5;
 704         u32 info2; /* %HAL_REO_DEST_RING_INFO2_ */
 705 } __packed;
 706
 707 /* hal_reo_dest_ring
 708  *
 709  *              Producer: RXDMA
 710  *              Consumer: REO/SW/FW
 711  *
 712  * buf_addr_info
 713  *              Details of the physical address of a buffer or MSDU
 714  *              link descriptor.
 715  *
 716  * rx_mpdu_info
 717  *              General information related to the MPDU that is passed
 718  *              on from REO entrance ring to the REO destination ring.
 719  *
 720  * rx_msdu_info
 721  *              General information related to the MSDU that is passed
 722  *              on from RXDMA all the way to the REO destination ring.
 723  *
 724  * queue_addr_lo
 725  *              Address (lower 32 bits) of the REO queue descriptor.
 726  *
 727  * queue_addr_hi
 728  *              Address (upper 8 bits) of the REO queue descriptor.
 729  *
 730  * buffer_type
 731  *              Indicates the type of address provided in the buf_addr_info.
 732  *              Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_.
 733  *
 734  * push_reason
 735  *              Reason for pushing this frame to this exit ring. Values are
 736  *              defined in enum %HAL_REO_DEST_RING_PUSH_REASON_.
 737  *
 738  * error_code
 739  *              Valid only when 'push_reason' is set. All error codes are
 740  *              defined in enum %HAL_REO_DEST_RING_ERROR_CODE_.
 741  *
 742  * rx_queue_num
 743  *              Indicates the REO MPDU reorder queue id from which this frame
 744  *              originated.
 745  *
 746  * reorder_info_valid
 747  *              When set, REO has been instructed to not perform the actual
 748  *              re-ordering of frames for this queue, but just to insert
 749  *              the reorder opcodes.
 750  *
 751  * reorder_opcode
 752  *              Field is valid when 'reorder_info_valid' is set. This field is
 753  *              always valid for debug purpose as well.
 754  *
 755  * reorder_slot_idx
 756  *              Valid only when 'reorder_info_valid' is set.
 757  *
 758  * ring_id
 759  *              The buffer pointer ring id.
 760  *              0 - Idle ring
 761  *              1 - N refers to other rings.
 762  *
 763  * looping_count
 764  *              Indicates the number of times the producer of entries into
 765  *              this ring has looped around the ring.
 766  */
 767
 768 enum hal_reo_entr_rxdma_ecode {
 769         HAL_REO_ENTR_RING_RXDMA_ECODE_OVERFLOW_ERR,
 770         HAL_REO_ENTR_RING_RXDMA_ECODE_MPDU_LEN_ERR,
 771         HAL_REO_ENTR_RING_RXDMA_ECODE_FCS_ERR,
 772         HAL_REO_ENTR_RING_RXDMA_ECODE_DECRYPT_ERR,
 773         HAL_REO_ENTR_RING_RXDMA_ECODE_TKIP_MIC_ERR,
 774         HAL_REO_ENTR_RING_RXDMA_ECODE_UNECRYPTED_ERR,
 775         HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LEN_ERR,
 776         HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LIMIT_ERR,
 777         HAL_REO_ENTR_RING_RXDMA_ECODE_WIFI_PARSE_ERR,
 778         HAL_REO_ENTR_RING_RXDMA_ECODE_AMSDU_PARSE_ERR,
 779         HAL_REO_ENTR_RING_RXDMA_ECODE_SA_TIMEOUT_ERR,
 780         HAL_REO_ENTR_RING_RXDMA_ECODE_DA_TIMEOUT_ERR,
 781         HAL_REO_ENTR_RING_RXDMA_ECODE_FLOW_TIMEOUT_ERR,
 782         HAL_REO_ENTR_RING_RXDMA_ECODE_FLUSH_REQUEST_ERR,
 783         HAL_REO_ENTR_RING_RXDMA_ECODE_MAX,
 784 };
 785
 786 #define HAL_REO_ENTR_RING_INFO0_QUEUE_ADDR_HI           GENMASK(7, 0)
 787 #define HAL_REO_ENTR_RING_INFO0_MPDU_BYTE_COUNT         GENMASK(21, 8)
 788 #define HAL_REO_ENTR_RING_INFO0_DEST_IND                GENMASK(26, 22)
 789 #define HAL_REO_ENTR_RING_INFO0_FRAMELESS_BAR           BIT(27)
 790
 791 #define HAL_REO_ENTR_RING_INFO1_RXDMA_PUSH_REASON       GENMASK(1, 0)
 792 #define HAL_REO_ENTR_RING_INFO1_RXDMA_ERROR_CODE        GENMASK(6, 2)
 793
 794 struct hal_reo_entrance_ring {
 795         struct ath11k_buffer_addr buf_addr_info;
 796         struct rx_mpdu_desc rx_mpdu_info;
 797         u32 queue_addr_lo;
 798         u32 info0; /* %HAL_REO_ENTR_RING_INFO0_ */
 799         u32 info1; /* %HAL_REO_ENTR_RING_INFO1_ */
 800         u32 info2; /* %HAL_REO_DEST_RING_INFO2_ */
 801
 802 } __packed;
 803
 804 /* hal_reo_entrance_ring
 805  *
 806  *              Producer: RXDMA
 807  *              Consumer: REO
 808  *
 809  * buf_addr_info
 810  *              Details of the physical address of a buffer or MSDU
 811  *              link descriptor.
 812  *
 813  * rx_mpdu_info
 814  *              General information related to the MPDU that is passed
 815  *              on from REO entrance ring to the REO destination ring.
 816  *
 817  * queue_addr_lo
 818  *              Address (lower 32 bits) of the REO queue descriptor.
 819  *
 820  * queue_addr_hi
 821  *              Address (upper 8 bits) of the REO queue descriptor.
 822  *
 823  * mpdu_byte_count
 824  *              An approximation of the number of bytes received in this MPDU.
 825  *              Used to keeps stats on the amount of data flowing
 826  *              through a queue.
 827  *
 828  * reo_destination_indication
 829  *              The id of the reo exit ring where the msdu frame shall push
 830  *              after (MPDU level) reordering has finished. Values are defined
 831  *              in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_.
 832  *
 833  * frameless_bar
 834  *              Indicates that this REO entrance ring struct contains BAR info
 835  *              from a multi TID BAR frame. The original multi TID BAR frame
 836  *              itself contained all the REO info for the first TID, but all
 837  *              the subsequent TID info and their linkage to the REO descriptors
 838  *              is passed down as 'frameless' BAR info.
 839  *
 840  *              The only fields valid in this descriptor when this bit is set
 841  *              are queue_addr_lo, queue_addr_hi, mpdu_sequence_number,
 842  *              bar_frame and peer_meta_data.
 843  *
 844  * rxdma_push_reason
 845  *              Reason for pushing this frame to this exit ring. Values are
 846  *              defined in enum %HAL_REO_DEST_RING_PUSH_REASON_.
 847  *
 848  * rxdma_error_code
 849  *              Valid only when 'push_reason' is set. All error codes are
 850  *              defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_.
 851  *
 852  * ring_id
 853  *              The buffer pointer ring id.
 854  *              0 - Idle ring
 855  *              1 - N refers to other rings.
 856  *
 857  * looping_count
 858  *              Indicates the number of times the producer of entries into
 859  *              this ring has looped around the ring.
 860  */
 861
 862 #define HAL_SW_MON_RING_INFO0_RXDMA_PUSH_REASON GENMASK(1, 0)
 863 #define HAL_SW_MON_RING_INFO0_RXDMA_ERROR_CODE  GENMASK(6, 2)
 864 #define HAL_SW_MON_RING_INFO0_MPDU_FRAG_NUMBER  GENMASK(10, 7)
 865 #define HAL_SW_MON_RING_INFO0_FRAMELESS_BAR     BIT(11)
 866 #define HAL_SW_MON_RING_INFO0_STATUS_BUF_CNT    GENMASK(15, 12)
 867 #define HAL_SW_MON_RING_INFO0_END_OF_PPDU       BIT(16)
 868
 869 #define HAL_SW_MON_RING_INFO1_PHY_PPDU_ID       GENMASK(15, 0)
 870 #define HAL_SW_MON_RING_INFO1_RING_ID           GENMASK(27, 20)
 871 #define HAL_SW_MON_RING_INFO1_LOOPING_COUNT     GENMASK(31, 28)
 872
 873 struct hal_sw_monitor_ring {
 874         struct ath11k_buffer_addr buf_addr_info;
 875         struct rx_mpdu_desc rx_mpdu_info;
 876         struct ath11k_buffer_addr status_buf_addr_info;
 877         u32 info0;
 878         u32 info1;
 879 } __packed;
 880
 881 #define HAL_REO_CMD_HDR_INFO0_CMD_NUMBER        GENMASK(15, 0)
 882 #define HAL_REO_CMD_HDR_INFO0_STATUS_REQUIRED   BIT(16)
 883
 884 struct hal_reo_cmd_hdr {
 885         u32 info0;
 886 } __packed;
 887
 888 #define HAL_REO_GET_QUEUE_STATS_INFO0_QUEUE_ADDR_HI     GENMASK(7, 0)
 889 #define HAL_REO_GET_QUEUE_STATS_INFO0_CLEAR_STATS       BIT(8)
 890
 891 struct hal_reo_get_queue_stats {
 892         struct hal_reo_cmd_hdr cmd;
 893         u32 queue_addr_lo;
 894         u32 info0;
 895         u32 rsvd0[6];
 896 } __packed;
 897
 898 /* hal_reo_get_queue_stats
 899  *              Producer: SW
 900  *              Consumer: REO
 901  *
 902  * cmd
 903  *              Details for command execution tracking purposes.
 904  *
 905  * queue_addr_lo
 906  *              Address (lower 32 bits) of the REO queue descriptor.
 907  *
 908  * queue_addr_hi
 909  *              Address (upper 8 bits) of the REO queue descriptor.
 910  *
 911  * clear_stats
 912  *              Clear stats settings. When set, Clear the stats after
 913  *              generating the status.
 914  *
 915  *              Following stats will be cleared.
 916  *              Timeout_count
 917  *              Forward_due_to_bar_count
 918  *              Duplicate_count
 919  *              Frames_in_order_count
 920  *              BAR_received_count
 921  *              MPDU_Frames_processed_count
 922  *              MSDU_Frames_processed_count
 923  *              Total_processed_byte_count
 924  *              Late_receive_MPDU_count
 925  *              window_jump_2k
 926  *              Hole_count
 927  */
 928
 929 #define HAL_REO_FLUSH_QUEUE_INFO0_DESC_ADDR_HI          GENMASK(7, 0)
 930 #define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_DESC_ADDR       BIT(8)
 931 #define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_RESRC_IDX       GENMASK(10, 9)
 932
 933 struct hal_reo_flush_queue {
 934         struct hal_reo_cmd_hdr cmd;
 935         u32 desc_addr_lo;
 936         u32 info0;
 937         u32 rsvd0[6];
 938 } __packed;
 939
 940 #define HAL_REO_FLUSH_CACHE_INFO0_CACHE_ADDR_HI         GENMASK(7, 0)
 941 #define HAL_REO_FLUSH_CACHE_INFO0_FWD_ALL_MPDUS         BIT(8)
 942 #define HAL_REO_FLUSH_CACHE_INFO0_RELEASE_BLOCK_IDX     BIT(9)
 943 #define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_RESRC_IDX       GENMASK(11, 10)
 944 #define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_WO_INVALIDATE   BIT(12)
 945 #define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_CACHE_USAGE     BIT(13)
 946 #define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_ALL             BIT(14)
 947
 948 struct hal_reo_flush_cache {
 949         struct hal_reo_cmd_hdr cmd;
 950         u32 cache_addr_lo;
 951         u32 info0;
 952         u32 rsvd0[6];
 953 } __packed;
 954
 955 #define HAL_TCL_DATA_CMD_INFO0_DESC_TYPE        BIT(0)
 956 #define HAL_TCL_DATA_CMD_INFO0_EPD              BIT(1)
 957 #define HAL_TCL_DATA_CMD_INFO0_ENCAP_TYPE       GENMASK(3, 2)
 958 #define HAL_TCL_DATA_CMD_INFO0_ENCRYPT_TYPE     GENMASK(7, 4)
 959 #define HAL_TCL_DATA_CMD_INFO0_SRC_BUF_SWAP     BIT(8)
 960 #define HAL_TCL_DATA_CMD_INFO0_LNK_META_SWAP    BIT(9)
 961 #define HAL_TCL_DATA_CMD_INFO0_SEARCH_TYPE      GENMASK(13, 12)
 962 #define HAL_TCL_DATA_CMD_INFO0_ADDR_EN          GENMASK(15, 14)
 963 #define HAL_TCL_DATA_CMD_INFO0_CMD_NUM          GENMASK(31, 16)
 964
 965 #define HAL_TCL_DATA_CMD_INFO1_DATA_LEN         GENMASK(15, 0)
 966 #define HAL_TCL_DATA_CMD_INFO1_IP4_CKSUM_EN     BIT(16)
 967 #define HAL_TCL_DATA_CMD_INFO1_UDP4_CKSUM_EN    BIT(17)
 968 #define HAL_TCL_DATA_CMD_INFO1_UDP6_CKSUM_EN    BIT(18)
 969 #define HAL_TCL_DATA_CMD_INFO1_TCP4_CKSUM_EN    BIT(19)
 970 #define HAL_TCL_DATA_CMD_INFO1_TCP6_CKSUM_EN    BIT(20)
 971 #define HAL_TCL_DATA_CMD_INFO1_TO_FW            BIT(21)
 972 #define HAL_TCL_DATA_CMD_INFO1_PKT_OFFSET       GENMASK(31, 23)
 973
 974 #define HAL_TCL_DATA_CMD_INFO2_BUF_TIMESTAMP            GENMASK(18, 0)
 975 #define HAL_TCL_DATA_CMD_INFO2_BUF_T_VALID              BIT(19)
 976 #define HAL_IPQ8074_TCL_DATA_CMD_INFO2_MESH_ENABLE      BIT(20)
 977 #define HAL_TCL_DATA_CMD_INFO2_TID_OVERWRITE            BIT(21)
 978 #define HAL_TCL_DATA_CMD_INFO2_TID                      GENMASK(25, 22)
 979 #define HAL_TCL_DATA_CMD_INFO2_LMAC_ID                  GENMASK(27, 26)
 980
 981 #define HAL_TCL_DATA_CMD_INFO3_DSCP_TID_TABLE_IDX       GENMASK(5, 0)
 982 #define HAL_TCL_DATA_CMD_INFO3_SEARCH_INDEX             GENMASK(25, 6)
 983 #define HAL_TCL_DATA_CMD_INFO3_CACHE_SET_NUM            GENMASK(29, 26)
 984 #define HAL_QCN9074_TCL_DATA_CMD_INFO3_MESH_ENABLE      GENMASK(31, 30)
 985
 986 #define HAL_TCL_DATA_CMD_INFO4_RING_ID                  GENMASK(27, 20)
 987 #define HAL_TCL_DATA_CMD_INFO4_LOOPING_COUNT            GENMASK(31, 28)
 988
 989 enum hal_encrypt_type {
 990         HAL_ENCRYPT_TYPE_WEP_40,
 991         HAL_ENCRYPT_TYPE_WEP_104,
 992         HAL_ENCRYPT_TYPE_TKIP_NO_MIC,
 993         HAL_ENCRYPT_TYPE_WEP_128,
 994         HAL_ENCRYPT_TYPE_TKIP_MIC,
 995         HAL_ENCRYPT_TYPE_WAPI,
 996         HAL_ENCRYPT_TYPE_CCMP_128,
 997         HAL_ENCRYPT_TYPE_OPEN,
 998         HAL_ENCRYPT_TYPE_CCMP_256,
 999         HAL_ENCRYPT_TYPE_GCMP_128,
1000         HAL_ENCRYPT_TYPE_AES_GCMP_256,
1001         HAL_ENCRYPT_TYPE_WAPI_GCM_SM4,
1002 };
1003
1004 enum hal_tcl_encap_type {
1005         HAL_TCL_ENCAP_TYPE_RAW,
1006         HAL_TCL_ENCAP_TYPE_NATIVE_WIFI,
1007         HAL_TCL_ENCAP_TYPE_ETHERNET,
1008         HAL_TCL_ENCAP_TYPE_802_3 = 3,
1009 };
1010
1011 enum hal_tcl_desc_type {
1012         HAL_TCL_DESC_TYPE_BUFFER,
1013         HAL_TCL_DESC_TYPE_EXT_DESC,
1014 };
1015
1016 enum hal_wbm_htt_tx_comp_status {
1017         HAL_WBM_REL_HTT_TX_COMP_STATUS_OK,
1018         HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP,
1019         HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL,
1020         HAL_WBM_REL_HTT_TX_COMP_STATUS_REINJ,
1021         HAL_WBM_REL_HTT_TX_COMP_STATUS_INSPECT,
1022         HAL_WBM_REL_HTT_TX_COMP_STATUS_MEC_NOTIFY,
1023 };
1024
1025 struct hal_tcl_data_cmd {
1026         struct ath11k_buffer_addr buf_addr_info;
1027         u32 info0;
1028         u32 info1;
1029         u32 info2;
1030         u32 info3;
1031         u32 info4;
1032 } __packed;
1033
1034 /* hal_tcl_data_cmd
1035  *
1036  * buf_addr_info
1037  *              Details of the physical address of a buffer or MSDU
1038  *              link descriptor.
1039  *
1040  * desc_type
1041  *              Indicates the type of address provided in the buf_addr_info.
1042  *              Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_.
1043  *
1044  * epd
1045  *              When this bit is set then input packet is an EPD type.
1046  *
1047  * encap_type
1048  *              Indicates the encapsulation that HW will perform. Values are
1049  *              defined in enum %HAL_TCL_ENCAP_TYPE_.
1050  *
1051  * encrypt_type
1052  *              Field only valid for encap_type: RAW
1053  *              Values are defined in enum %HAL_ENCRYPT_TYPE_.
1054  *
1055  * src_buffer_swap
1056  *              Treats source memory (packet buffer) organization as big-endian.
1057  *              1'b0: Source memory is little endian
1058  *              1'b1: Source memory is big endian
1059  *
1060  * link_meta_swap
1061  *              Treats link descriptor and Metadata as big-endian.
1062  *              1'b0: memory is little endian
1063  *              1'b1: memory is big endian
1064  *
1065  * search_type
1066  *              Search type select
1067  *              0 - Normal search, 1 - Index based address search,
1068  *              2 - Index based flow search
1069  *
1070  * addrx_en
1071  * addry_en
1072  *              Address X/Y search enable in ASE correspondingly.
1073  *              1'b0: Search disable
1074  *              1'b1: Search Enable
1075  *
1076  * cmd_num
1077  *              This number can be used to match against status.
1078  *
1079  * data_length
1080  *              MSDU length in case of direct descriptor. Length of link
1081  *              extension descriptor in case of Link extension descriptor.
1082  *
1083  * *_checksum_en
1084  *              Enable checksum replacement for ipv4, udp_over_ipv4, ipv6,
1085  *              udp_over_ipv6, tcp_over_ipv4 and tcp_over_ipv6.
1086  *
1087  * to_fw
1088  *              Forward packet to FW along with classification result. The
1089  *              packet will not be forward to TQM when this bit is set.
1090  *              1'b0: Use classification result to forward the packet.
1091  *              1'b1: Override classification result & forward packet only to fw
1092  *
1093  * packet_offset
1094  *              Packet offset from Metadata in case of direct buffer descriptor.
1095  *
1096  * buffer_timestamp
1097  * buffer_timestamp_valid
1098  *              Frame system entrance timestamp. It shall be filled by first
1099  *              module (SW, TCL or TQM) that sees the frames first.
1100  *
1101  * mesh_enable
1102  *              For raw WiFi frames, this indicates transmission to a mesh STA,
1103  *              enabling the interpretation of the 'Mesh Control Present' bit
1104  *              (bit 8) of QoS Control.
1105  *              For native WiFi frames, this indicates that a 'Mesh Control'
1106  *              field is present between the header and the LLC.
1107  *
1108  * hlos_tid_overwrite
1109  *
1110  *              When set, TCL shall ignore the IP DSCP and VLAN PCP
1111  *              fields and use HLOS_TID as the final TID. Otherwise TCL
1112  *              shall consider the DSCP and PCP fields as well as HLOS_TID
1113  *              and choose a final TID based on the configured priority
1114  *
1115  * hlos_tid
1116  *              HLOS MSDU priority
1117  *              Field is used when HLOS_TID_overwrite is set.
1118  *
1119  * lmac_id
1120  *              TCL uses this LMAC_ID in address search, i.e, while
1121  *              finding matching entry for the packet in AST corresponding
1122  *              to given LMAC_ID
1123  *
1124  *              If LMAC ID is all 1s (=> value 3), it indicates wildcard
1125  *              match for any MAC
1126  *
1127  * dscp_tid_table_num
1128  *              DSCP to TID mapping table number that need to be used
1129  *              for the MSDU.
1130  *
1131  * search_index
1132  *              The index that will be used for index based address or
1133  *              flow search. The field is valid when 'search_type' is  1 or 2.
1134  *
1135  * cache_set_num
1136  *
1137  *              Cache set number that should be used to cache the index
1138  *              based search results, for address and flow search. This
1139  *              value should be equal to LSB four bits of the hash value of
1140  *              match data, in case of search index points to an entry which
1141  *              may be used in content based search also. The value can be
1142  *              anything when the entry pointed by search index will not be
1143  *              used for content based search.
1144  *
1145  * ring_id
1146  *              The buffer pointer ring ID.
1147  *              0 refers to the IDLE ring
1148  *              1 - N refers to other rings
1149  *
1150  * looping_count
1151  *
1152  *              A count value that indicates the number of times the
1153  *              producer of entries into the Ring has looped around the
1154  *              ring.
1155  *
1156  *              At initialization time, this value is set to 0. On the
1157  *              first loop, this value is set to 1. After the max value is
1158  *              reached allowed by the number of bits for this field, the
1159  *              count value continues with 0 again.
1160  *
1161  *              In case SW is the consumer of the ring entries, it can
1162  *              use this field to figure out up to where the producer of
1163  *              entries has created new entries. This eliminates the need to
1164  *              check where the head pointer' of the ring is located once
1165  *              the SW starts processing an interrupt indicating that new
1166  *              entries have been put into this ring...
1167  *
1168  *              Also note that SW if it wants only needs to look at the
1169  *              LSB bit of this count value.
1170  */
1171
1172 #define HAL_TCL_DESC_LEN sizeof(struct hal_tcl_data_cmd)
1173
1174 enum hal_tcl_gse_ctrl {
1175         HAL_TCL_GSE_CTRL_RD_STAT,
1176         HAL_TCL_GSE_CTRL_SRCH_DIS,
1177         HAL_TCL_GSE_CTRL_WR_BK_SINGLE,
1178         HAL_TCL_GSE_CTRL_WR_BK_ALL,
1179         HAL_TCL_GSE_CTRL_INVAL_SINGLE,
1180         HAL_TCL_GSE_CTRL_INVAL_ALL,
1181         HAL_TCL_GSE_CTRL_WR_BK_INVAL_SINGLE,
1182         HAL_TCL_GSE_CTRL_WR_BK_INVAL_ALL,
1183         HAL_TCL_GSE_CTRL_CLR_STAT_SINGLE,
1184 };
1185
1186 /* hal_tcl_gse_ctrl
1187  *
1188  * rd_stat
1189  *              Report or Read statistics
1190  * srch_dis
1191  *              Search disable. Report only Hash.
1192  * wr_bk_single
1193  *              Write Back single entry
1194  * wr_bk_all
1195  *              Write Back entire cache entry
1196  * inval_single
1197  *              Invalidate single cache entry
1198  * inval_all
1199  *              Invalidate entire cache
1200  * wr_bk_inval_single
1201  *              Write back and invalidate single entry in cache
1202  * wr_bk_inval_all
1203  *              Write back and invalidate entire cache
1204  * clr_stat_single
1205  *              Clear statistics for single entry
1206  */
1207
1208 #define HAL_TCL_GSE_CMD_INFO0_CTRL_BUF_ADDR_HI          GENMASK(7, 0)
1209 #define HAL_TCL_GSE_CMD_INFO0_GSE_CTRL                  GENMASK(11, 8)
1210 #define HAL_TCL_GSE_CMD_INFO0_GSE_SEL                   BIT(12)
1211 #define HAL_TCL_GSE_CMD_INFO0_STATUS_DEST_RING_ID       BIT(13)
1212 #define HAL_TCL_GSE_CMD_INFO0_SWAP                      BIT(14)
1213
1214 #define HAL_TCL_GSE_CMD_INFO1_RING_ID                   GENMASK(27, 20)
1215 #define HAL_TCL_GSE_CMD_INFO1_LOOPING_COUNT             GENMASK(31, 28)
1216
1217 struct hal_tcl_gse_cmd {
1218         u32 ctrl_buf_addr_lo;
1219         u32 info0;
1220         u32 meta_data[2];
1221         u32 rsvd0[2];
1222         u32 info1;
1223 } __packed;
1224
1225 /* hal_tcl_gse_cmd
1226  *
1227  * ctrl_buf_addr_lo, ctrl_buf_addr_hi
1228  *              Address of a control buffer containing additional info needed
1229  *              for this command execution.
1230  *
1231  * gse_ctrl
1232  *              GSE control operations. This includes cache operations and table
1233  *              entry statistics read/clear operation. Values are defined in
1234  *              enum %HAL_TCL_GSE_CTRL.
1235  *
1236  * gse_sel
1237  *              To select the ASE/FSE to do the operation mention by GSE_ctrl.
1238  *              0: FSE select 1: ASE select
1239  *
1240  * status_destination_ring_id
1241  *              TCL status ring to which the GSE status needs to be send.
1242  *
1243  * swap
1244  *              Bit to enable byte swapping of contents of buffer.
1245  *
1246  * meta_data
1247  *              Meta data to be returned in the status descriptor
1248  */
1249
1250 enum hal_tcl_cache_op_res {
1251         HAL_TCL_CACHE_OP_RES_DONE,
1252         HAL_TCL_CACHE_OP_RES_NOT_FOUND,
1253         HAL_TCL_CACHE_OP_RES_TIMEOUT,
1254 };
1255
1256 #define HAL_TCL_STATUS_RING_INFO0_GSE_CTRL              GENMASK(3, 0)
1257 #define HAL_TCL_STATUS_RING_INFO0_GSE_SEL               BIT(4)
1258 #define HAL_TCL_STATUS_RING_INFO0_CACHE_OP_RES          GENMASK(6, 5)
1259 #define HAL_TCL_STATUS_RING_INFO0_MSDU_CNT              GENMASK(31, 8)
1260
1261 #define HAL_TCL_STATUS_RING_INFO1_HASH_IDX              GENMASK(19, 0)
1262
1263 #define HAL_TCL_STATUS_RING_INFO2_RING_ID               GENMASK(27, 20)
1264 #define HAL_TCL_STATUS_RING_INFO2_LOOPING_COUNT         GENMASK(31, 28)
1265
1266 struct hal_tcl_status_ring {
1267         u32 info0;
1268         u32 msdu_byte_count;
1269         u32 msdu_timestamp;
1270         u32 meta_data[2];
1271         u32 info1;
1272         u32 rsvd0;
1273         u32 info2;
1274 } __packed;
1275
1276 /* hal_tcl_status_ring
1277  *
1278  * gse_ctrl
1279  *              GSE control operations. This includes cache operations and table
1280  *              entry statistics read/clear operation. Values are defined in
1281  *              enum %HAL_TCL_GSE_CTRL.
1282  *
1283  * gse_sel
1284  *              To select the ASE/FSE to do the operation mention by GSE_ctrl.
1285  *              0: FSE select 1: ASE select
1286  *
1287  * cache_op_res
1288  *              Cache operation result. Values are defined in enum
1289  *              %HAL_TCL_CACHE_OP_RES_.
1290  *
1291  * msdu_cnt
1292  * msdu_byte_count
1293  *              MSDU count of Entry and MSDU byte count for entry 1.
1294  *
1295  * hash_indx
1296  *              Hash value of the entry in case of search failed or disabled.
1297  */
1298
1299 #define HAL_CE_SRC_DESC_ADDR_INFO_ADDR_HI       GENMASK(7, 0)
1300 #define HAL_CE_SRC_DESC_ADDR_INFO_HASH_EN       BIT(8)
1301 #define HAL_CE_SRC_DESC_ADDR_INFO_BYTE_SWAP     BIT(9)
1302 #define HAL_CE_SRC_DESC_ADDR_INFO_DEST_SWAP     BIT(10)
1303 #define HAL_CE_SRC_DESC_ADDR_INFO_GATHER        BIT(11)
1304 #define HAL_CE_SRC_DESC_ADDR_INFO_LEN           GENMASK(31, 16)
1305
1306 #define HAL_CE_SRC_DESC_META_INFO_DATA          GENMASK(15, 0)
1307
1308 #define HAL_CE_SRC_DESC_FLAGS_RING_ID           GENMASK(27, 20)
1309 #define HAL_CE_SRC_DESC_FLAGS_LOOP_CNT          HAL_SRNG_DESC_LOOP_CNT
1310
1311 struct hal_ce_srng_src_desc {
1312         u32 buffer_addr_low;
1313         u32 buffer_addr_info; /* %HAL_CE_SRC_DESC_ADDR_INFO_ */
1314         u32 meta_info; /* %HAL_CE_SRC_DESC_META_INFO_ */
1315         u32 flags; /* %HAL_CE_SRC_DESC_FLAGS_ */
1316 } __packed;
1317
1318 /*
1319  * hal_ce_srng_src_desc
1320  *
1321  * buffer_addr_lo
1322  *              LSB 32 bits of the 40 Bit Pointer to the source buffer
1323  *
1324  * buffer_addr_hi
1325  *              MSB 8 bits of the 40 Bit Pointer to the source buffer
1326  *
1327  * toeplitz_en
1328  *              Enable generation of 32-bit Toeplitz-LFSR hash for
1329  *              data transfer. In case of gather field in first source
1330  *              ring entry of the gather copy cycle in taken into account.
1331  *
1332  * src_swap
1333  *              Treats source memory organization as big-endian. For
1334  *              each dword read (4 bytes), the byte 0 is swapped with byte 3
1335  *              and byte 1 is swapped with byte 2.
1336  *              In case of gather field in first source ring entry of
1337  *              the gather copy cycle in taken into account.
1338  *
1339  * dest_swap
1340  *              Treats destination memory organization as big-endian.
1341  *              For each dword write (4 bytes), the byte 0 is swapped with
1342  *              byte 3 and byte 1 is swapped with byte 2.
1343  *              In case of gather field in first source ring entry of
1344  *              the gather copy cycle in taken into account.
1345  *
1346  * gather
1347  *              Enables gather of multiple copy engine source
1348  *              descriptors to one destination.
1349  *
1350  * ce_res_0
1351  *              Reserved
1352  *
1353  *
1354  * length
1355  *              Length of the buffer in units of octets of the current
1356  *              descriptor
1357  *
1358  * fw_metadata
1359  *              Meta data used by FW.
1360  *              In case of gather field in first source ring entry of
1361  *              the gather copy cycle in taken into account.
1362  *
1363  * ce_res_1
1364  *              Reserved
1365  *
1366  * ce_res_2
1367  *              Reserved
1368  *
1369  * ring_id
1370  *              The buffer pointer ring ID.
1371  *              0 refers to the IDLE ring
1372  *              1 - N refers to other rings
1373  *              Helps with debugging when dumping ring contents.
1374  *
1375  * looping_count
1376  *              A count value that indicates the number of times the
1377  *              producer of entries into the Ring has looped around the
1378  *              ring.
1379  *
1380  *              At initialization time, this value is set to 0. On the
1381  *              first loop, this value is set to 1. After the max value is
1382  *              reached allowed by the number of bits for this field, the
1383  *              count value continues with 0 again.
1384  *
1385  *              In case SW is the consumer of the ring entries, it can
1386  *              use this field to figure out up to where the producer of
1387  *              entries has created new entries. This eliminates the need to
1388  *              check where the head pointer' of the ring is located once
1389  *              the SW starts processing an interrupt indicating that new
1390  *              entries have been put into this ring...
1391  *
1392  *              Also note that SW if it wants only needs to look at the
1393  *              LSB bit of this count value.
1394  */
1395
1396 #define HAL_CE_DEST_DESC_ADDR_INFO_ADDR_HI              GENMASK(7, 0)
1397 #define HAL_CE_DEST_DESC_ADDR_INFO_RING_ID              GENMASK(27, 20)
1398 #define HAL_CE_DEST_DESC_ADDR_INFO_LOOP_CNT             HAL_SRNG_DESC_LOOP_CNT
1399
1400 struct hal_ce_srng_dest_desc {
1401         u32 buffer_addr_low;
1402         u32 buffer_addr_info; /* %HAL_CE_DEST_DESC_ADDR_INFO_ */
1403 } __packed;
1404
1405 /* hal_ce_srng_dest_desc
1406  *
1407  * dst_buffer_low
1408  *              LSB 32 bits of the 40 Bit Pointer to the Destination
1409  *              buffer
1410  *
1411  * dst_buffer_high
1412  *              MSB 8 bits of the 40 Bit Pointer to the Destination
1413  *              buffer
1414  *
1415  * ce_res_4
1416  *              Reserved
1417  *
1418  * ring_id
1419  *              The buffer pointer ring ID.
1420  *              0 refers to the IDLE ring
1421  *              1 - N refers to other rings
1422  *              Helps with debugging when dumping ring contents.
1423  *
1424  * looping_count
1425  *              A count value that indicates the number of times the
1426  *              producer of entries into the Ring has looped around the
1427  *              ring.
1428  *
1429  *              At initialization time, this value is set to 0. On the
1430  *              first loop, this value is set to 1. After the max value is
1431  *              reached allowed by the number of bits for this field, the
1432  *              count value continues with 0 again.
1433  *
1434  *              In case SW is the consumer of the ring entries, it can
1435  *              use this field to figure out up to where the producer of
1436  *              entries has created new entries. This eliminates the need to
1437  *              check where the head pointer' of the ring is located once
1438  *              the SW starts processing an interrupt indicating that new
1439  *              entries have been put into this ring...
1440  *
1441  *              Also note that SW if it wants only needs to look at the
1442  *              LSB bit of this count value.
1443  */
1444
1445 #define HAL_CE_DST_STATUS_DESC_FLAGS_HASH_EN            BIT(8)
1446 #define HAL_CE_DST_STATUS_DESC_FLAGS_BYTE_SWAP          BIT(9)
1447 #define HAL_CE_DST_STATUS_DESC_FLAGS_DEST_SWAP          BIT(10)
1448 #define HAL_CE_DST_STATUS_DESC_FLAGS_GATHER             BIT(11)
1449 #define HAL_CE_DST_STATUS_DESC_FLAGS_LEN                GENMASK(31, 16)
1450
1451 #define HAL_CE_DST_STATUS_DESC_META_INFO_DATA           GENMASK(15, 0)
1452 #define HAL_CE_DST_STATUS_DESC_META_INFO_RING_ID        GENMASK(27, 20)
1453 #define HAL_CE_DST_STATUS_DESC_META_INFO_LOOP_CNT       HAL_SRNG_DESC_LOOP_CNT
1454
1455 struct hal_ce_srng_dst_status_desc {
1456         u32 flags; /* %HAL_CE_DST_STATUS_DESC_FLAGS_ */
1457         u32 toeplitz_hash0;
1458         u32 toeplitz_hash1;
1459         u32 meta_info; /* HAL_CE_DST_STATUS_DESC_META_INFO_ */
1460 } __packed;
1461
1462 /* hal_ce_srng_dst_status_desc
1463  *
1464  * ce_res_5
1465  *              Reserved
1466  *
1467  * toeplitz_en
1468  *
1469  * src_swap
1470  *              Source memory buffer swapped
1471  *
1472  * dest_swap
1473  *              Destination  memory buffer swapped
1474  *
1475  * gather
1476  *              Gather of multiple copy engine source descriptors to one
1477  *              destination enabled
1478  *
1479  * ce_res_6
1480  *              Reserved
1481  *
1482  * length
1483  *              Sum of all the Lengths of the source descriptor in the
1484  *              gather chain
1485  *
1486  * toeplitz_hash_0
1487  *              32 LS bits of 64 bit Toeplitz LFSR hash result
1488  *
1489  * toeplitz_hash_1
1490  *              32 MS bits of 64 bit Toeplitz LFSR hash result
1491  *
1492  * fw_metadata
1493  *              Meta data used by FW
1494  *              In case of gather field in first source ring entry of
1495  *              the gather copy cycle in taken into account.
1496  *
1497  * ce_res_7
1498  *              Reserved
1499  *
1500  * ring_id
1501  *              The buffer pointer ring ID.
1502  *              0 refers to the IDLE ring
1503  *              1 - N refers to other rings
1504  *              Helps with debugging when dumping ring contents.
1505  *
1506  * looping_count
1507  *              A count value that indicates the number of times the
1508  *              producer of entries into the Ring has looped around the
1509  *              ring.
1510  *
1511  *              At initialization time, this value is set to 0. On the
1512  *              first loop, this value is set to 1. After the max value is
1513  *              reached allowed by the number of bits for this field, the
1514  *              count value continues with 0 again.
1515  *
1516  *              In case SW is the consumer of the ring entries, it can
1517  *              use this field to figure out up to where the producer of
1518  *              entries has created new entries. This eliminates the need to
1519  *              check where the head pointer' of the ring is located once
1520  *              the SW starts processing an interrupt indicating that new
1521  *              entries have been put into this ring...
1522  *
1523  *              Also note that SW if it wants only needs to look at the
1524  *                      LSB bit of this count value.
1525  */
1526
1527 #define HAL_TX_RATE_STATS_INFO0_VALID           BIT(0)
1528 #define HAL_TX_RATE_STATS_INFO0_BW              GENMASK(2, 1)
1529 #define HAL_TX_RATE_STATS_INFO0_PKT_TYPE        GENMASK(6, 3)
1530 #define HAL_TX_RATE_STATS_INFO0_STBC            BIT(7)
1531 #define HAL_TX_RATE_STATS_INFO0_LDPC            BIT(8)
1532 #define HAL_TX_RATE_STATS_INFO0_SGI             GENMASK(10, 9)
1533 #define HAL_TX_RATE_STATS_INFO0_MCS             GENMASK(14, 11)
1534 #define HAL_TX_RATE_STATS_INFO0_OFDMA_TX        BIT(15)
1535 #define HAL_TX_RATE_STATS_INFO0_TONES_IN_RU     GENMASK(27, 16)
1536
1537 enum hal_tx_rate_stats_bw {
1538         HAL_TX_RATE_STATS_BW_20,
1539         HAL_TX_RATE_STATS_BW_40,
1540         HAL_TX_RATE_STATS_BW_80,
1541         HAL_TX_RATE_STATS_BW_160,
1542 };
1543
1544 enum hal_tx_rate_stats_pkt_type {
1545         HAL_TX_RATE_STATS_PKT_TYPE_11A,
1546         HAL_TX_RATE_STATS_PKT_TYPE_11B,
1547         HAL_TX_RATE_STATS_PKT_TYPE_11N,
1548         HAL_TX_RATE_STATS_PKT_TYPE_11AC,
1549         HAL_TX_RATE_STATS_PKT_TYPE_11AX,
1550 };
1551
1552 enum hal_tx_rate_stats_sgi {
1553         HAL_TX_RATE_STATS_SGI_08US,
1554         HAL_TX_RATE_STATS_SGI_04US,
1555         HAL_TX_RATE_STATS_SGI_16US,
1556         HAL_TX_RATE_STATS_SGI_32US,
1557 };
1558
1559 struct hal_tx_rate_stats {
1560         u32 info0;
1561         u32 tsf;
1562 } __packed;
1563
1564 struct hal_wbm_link_desc {
1565         struct ath11k_buffer_addr buf_addr_info;
1566 } __packed;
1567
1568 /* hal_wbm_link_desc
1569  *
1570  *      Producer: WBM
1571  *      Consumer: WBM
1572  *
1573  * buf_addr_info
1574  *              Details of the physical address of a buffer or MSDU
1575  *              link descriptor.
1576  */
1577
1578 enum hal_wbm_rel_src_module {
1579         HAL_WBM_REL_SRC_MODULE_TQM,
1580         HAL_WBM_REL_SRC_MODULE_RXDMA,
1581         HAL_WBM_REL_SRC_MODULE_REO,
1582         HAL_WBM_REL_SRC_MODULE_FW,
1583         HAL_WBM_REL_SRC_MODULE_SW,
1584 };
1585
1586 enum hal_wbm_rel_desc_type {
1587         HAL_WBM_REL_DESC_TYPE_REL_MSDU,
1588         HAL_WBM_REL_DESC_TYPE_MSDU_LINK,
1589         HAL_WBM_REL_DESC_TYPE_MPDU_LINK,
1590         HAL_WBM_REL_DESC_TYPE_MSDU_EXT,
1591         HAL_WBM_REL_DESC_TYPE_QUEUE_EXT,
1592 };
1593
1594 /* hal_wbm_rel_desc_type
1595  *
1596  * msdu_buffer
1597  *      The address points to an MSDU buffer
1598  *
1599  * msdu_link_descriptor
1600  *      The address points to an Tx MSDU link descriptor
1601  *
1602  * mpdu_link_descriptor
1603  *      The address points to an MPDU link descriptor
1604  *
1605  * msdu_ext_descriptor
1606  *      The address points to an MSDU extension descriptor
1607  *
1608  * queue_ext_descriptor
1609  *      The address points to an TQM queue extension descriptor. WBM should
1610  *      treat this is the same way as a link descriptor.
1611  */
1612
1613 enum hal_wbm_rel_bm_act {
1614         HAL_WBM_REL_BM_ACT_PUT_IN_IDLE,
1615         HAL_WBM_REL_BM_ACT_REL_MSDU,
1616 };
1617
1618 /* hal_wbm_rel_bm_act
1619  *
1620  * put_in_idle_list
1621  *      Put the buffer or descriptor back in the idle list. In case of MSDU or
1622  *      MDPU link descriptor, BM does not need to check to release any
1623  *      individual MSDU buffers.
1624  *
1625  * release_msdu_list
1626  *      This BM action can only be used in combination with desc_type being
1627  *      msdu_link_descriptor. Field first_msdu_index points out which MSDU
1628  *      pointer in the MSDU link descriptor is the first of an MPDU that is
1629  *      released. BM shall release all the MSDU buffers linked to this first
1630  *      MSDU buffer pointer. All related MSDU buffer pointer entries shall be
1631  *      set to value 0, which represents the 'NULL' pointer. When all MSDU
1632  *      buffer pointers in the MSDU link descriptor are 'NULL', the MSDU link
1633  *      descriptor itself shall also be released.
1634  */
1635
1636 #define HAL_WBM_RELEASE_INFO0_REL_SRC_MODULE            GENMASK(2, 0)
1637 #define HAL_WBM_RELEASE_INFO0_BM_ACTION                 GENMASK(5, 3)
1638 #define HAL_WBM_RELEASE_INFO0_DESC_TYPE                 GENMASK(8, 6)
1639 #define HAL_WBM_RELEASE_INFO0_FIRST_MSDU_IDX            GENMASK(12, 9)
1640 #define HAL_WBM_RELEASE_INFO0_TQM_RELEASE_REASON        GENMASK(16, 13)
1641 #define HAL_WBM_RELEASE_INFO0_RXDMA_PUSH_REASON         GENMASK(18, 17)
1642 #define HAL_WBM_RELEASE_INFO0_RXDMA_ERROR_CODE          GENMASK(23, 19)
1643 #define HAL_WBM_RELEASE_INFO0_REO_PUSH_REASON           GENMASK(25, 24)
1644 #define HAL_WBM_RELEASE_INFO0_REO_ERROR_CODE            GENMASK(30, 26)
1645 #define HAL_WBM_RELEASE_INFO0_WBM_INTERNAL_ERROR        BIT(31)
1646
1647 #define HAL_WBM_RELEASE_INFO1_TQM_STATUS_NUMBER         GENMASK(23, 0)
1648 #define HAL_WBM_RELEASE_INFO1_TRANSMIT_COUNT            GENMASK(30, 24)
1649
1650 #define HAL_WBM_RELEASE_INFO2_ACK_FRAME_RSSI            GENMASK(7, 0)
1651 #define HAL_WBM_RELEASE_INFO2_SW_REL_DETAILS_VALID      BIT(8)
1652 #define HAL_WBM_RELEASE_INFO2_FIRST_MSDU                BIT(9)
1653 #define HAL_WBM_RELEASE_INFO2_LAST_MSDU                 BIT(10)
1654 #define HAL_WBM_RELEASE_INFO2_MSDU_IN_AMSDU             BIT(11)
1655 #define HAL_WBM_RELEASE_INFO2_FW_TX_NOTIF_FRAME         BIT(12)
1656 #define HAL_WBM_RELEASE_INFO2_BUFFER_TIMESTAMP          GENMASK(31, 13)
1657
1658 #define HAL_WBM_RELEASE_INFO3_PEER_ID                   GENMASK(15, 0)
1659 #define HAL_WBM_RELEASE_INFO3_TID                       GENMASK(19, 16)
1660 #define HAL_WBM_RELEASE_INFO3_RING_ID                   GENMASK(27, 20)
1661 #define HAL_WBM_RELEASE_INFO3_LOOPING_COUNT             GENMASK(31, 28)
1662
1663 #define HAL_WBM_REL_HTT_TX_COMP_INFO0_STATUS            GENMASK(12, 9)
1664 #define HAL_WBM_REL_HTT_TX_COMP_INFO0_REINJ_REASON      GENMASK(16, 13)
1665 #define HAL_WBM_REL_HTT_TX_COMP_INFO0_EXP_FRAME         BIT(17)
1666
1667 struct hal_wbm_release_ring {
1668         struct ath11k_buffer_addr buf_addr_info;
1669         u32 info0;
1670         u32 info1;
1671         u32 info2;
1672         struct hal_tx_rate_stats rate_stats;
1673         u32 info3;
1674 } __packed;
1675
1676 /* hal_wbm_release_ring
1677  *
1678  *      Producer: SW/TQM/RXDMA/REO/SWITCH
1679  *      Consumer: WBM/SW/FW
1680  *
1681  * HTT tx status is overlaid on wbm_release ring on 4-byte words 2, 3, 4 and 5
1682  * for software based completions.
1683  *
1684  * buf_addr_info
1685  *      Details of the physical address of the buffer or link descriptor.
1686  *
1687  * release_source_module
1688  *      Indicates which module initiated the release of this buffer/descriptor.
1689  *      Values are defined in enum %HAL_WBM_REL_SRC_MODULE_.
1690  *
1691  * bm_action
1692  *      Field only valid when the field return_buffer_manager in
1693  *      Released_buff_or_desc_addr_info indicates:
1694  *              WBM_IDLE_BUF_LIST / WBM_IDLE_DESC_LIST
1695  *      Values are defined in enum %HAL_WBM_REL_BM_ACT_.
1696  *
1697  * buffer_or_desc_type
1698  *      Field only valid when WBM is marked as the return_buffer_manager in
1699  *      the Released_Buffer_address_info. Indicates that type of buffer or
1700  *      descriptor is being released. Values are in enum %HAL_WBM_REL_DESC_TYPE.
1701  *
1702  * first_msdu_index
1703  *      Field only valid for the bm_action release_msdu_list. The index of the
1704  *      first MSDU in an MSDU link descriptor all belonging to the same MPDU.
1705  *
1706  * tqm_release_reason
1707  *      Field only valid when Release_source_module is set to release_source_TQM
1708  *      Release reasons are defined in enum %HAL_WBM_TQM_REL_REASON_.
1709  *
1710  * rxdma_push_reason
1711  * reo_push_reason
1712  *      Indicates why rxdma/reo pushed the frame to this ring and values are
1713  *      defined in enum %HAL_REO_DEST_RING_PUSH_REASON_.
1714  *
1715  * rxdma_error_code
1716  *      Field only valid when 'rxdma_push_reason' set to 'error_detected'.
1717  *      Values are defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_.
1718  *
1719  * reo_error_code
1720  *      Field only valid when 'reo_push_reason' set to 'error_detected'. Values
1721  *      are defined in enum %HAL_REO_DEST_RING_ERROR_CODE_.
1722  *
1723  * wbm_internal_error
1724  *      Is set when WBM got a buffer pointer but the action was to push it to
1725  *      the idle link descriptor ring or do link related activity OR
1726  *      Is set when WBM got a link buffer pointer but the action was to push it
1727  *      to the buffer descriptor ring.
1728  *
1729  * tqm_status_number
1730  *      The value in this field is equal to tqm_cmd_number in TQM command. It is
1731  *      used to correlate the statu with TQM commands. Only valid when
1732  *      release_source_module is TQM.
1733  *
1734  * transmit_count
1735  *      The number of times the frame has been transmitted, valid only when
1736  *      release source in TQM.
1737  *
1738  * ack_frame_rssi
1739  *      This field is only valid when the source is TQM. If this frame is
1740  *      removed as the result of the reception of an ACK or BA, this field
1741  *      indicates the RSSI of the received ACK or BA frame.
1742  *
1743  * sw_release_details_valid
1744  *      This is set when WMB got a 'release_msdu_list' command from TQM and
1745  *      return buffer manager is not WMB. WBM will then de-aggregate all MSDUs
1746  *      and pass them one at a time on to the 'buffer owner'.
1747  *
1748  * first_msdu
1749  *      Field only valid when SW_release_details_valid is set.
1750  *      When set, this MSDU is the first MSDU pointed to in the
1751  *      'release_msdu_list' command.
1752  *
1753  * last_msdu
1754  *      Field only valid when SW_release_details_valid is set.
1755  *      When set, this MSDU is the last MSDU pointed to in the
1756  *      'release_msdu_list' command.
1757  *
1758  * msdu_part_of_amsdu
1759  *      Field only valid when SW_release_details_valid is set.
1760  *      When set, this MSDU was part of an A-MSDU in MPDU
1761  *
1762  * fw_tx_notify_frame
1763  *      Field only valid when SW_release_details_valid is set.
1764  *
1765  * buffer_timestamp
1766  *      Field only valid when SW_release_details_valid is set.
1767  *      This is the Buffer_timestamp field from the
1768  *      Timestamp in units of 1024 us
1769  *
1770  * struct hal_tx_rate_stats rate_stats
1771  *      Details for command execution tracking purposes.
1772  *
1773  * sw_peer_id
1774  * tid
1775  *      Field only valid when Release_source_module is set to
1776  *      release_source_TQM
1777  *
1778  *      1) Release of msdu buffer due to drop_frame = 1. Flow is
1779  *      not fetched and hence sw_peer_id and tid = 0
1780  *
1781  *      buffer_or_desc_type = e_num 0
1782  *      MSDU_rel_buffertqm_release_reason = e_num 1
1783  *      tqm_rr_rem_cmd_rem
1784  *
1785  *      2) Release of msdu buffer due to Flow is not fetched and
1786  *      hence sw_peer_id and tid = 0
1787  *
1788  *      buffer_or_desc_type = e_num 0
1789  *      MSDU_rel_buffertqm_release_reason = e_num 1
1790  *      tqm_rr_rem_cmd_rem
1791  *
1792  *      3) Release of msdu link due to remove_mpdu or acked_mpdu
1793  *      command.
1794  *
1795  *      buffer_or_desc_type = e_num1
1796  *      msdu_link_descriptortqm_release_reason can be:e_num 1
1797  *      tqm_rr_rem_cmd_reme_num 2 tqm_rr_rem_cmd_tx
1798  *      e_num 3 tqm_rr_rem_cmd_notxe_num 4 tqm_rr_rem_cmd_aged
1799  *
1800  *      This field represents the TID from the TX_MSDU_FLOW
1801  *      descriptor or TX_MPDU_QUEUE descriptor
1802  *
1803  * rind_id
1804  *      For debugging.
1805  *      This field is filled in by the SRNG module.
1806  *      It help to identify the ring that is being looked
1807  *
1808  * looping_count
1809  *      A count value that indicates the number of times the
1810  *      producer of entries into the Buffer Manager Ring has looped
1811  *      around the ring.
1812  *
1813  *      At initialization time, this value is set to 0. On the
1814  *      first loop, this value is set to 1. After the max value is
1815  *      reached allowed by the number of bits for this field, the
1816  *      count value continues with 0 again.
1817  *
1818  *      In case SW is the consumer of the ring entries, it can
1819  *      use this field to figure out up to where the producer of
1820  *      entries has created new entries. This eliminates the need to
1821  *      check where the head pointer' of the ring is located once
1822  *      the SW starts processing an interrupt indicating that new
1823  *      entries have been put into this ring...
1824  *
1825  *      Also note that SW if it wants only needs to look at the
1826  *      LSB bit of this count value.
1827  */
1828
1829 /**
1830  * enum hal_wbm_tqm_rel_reason - TQM release reason code
1831  * @HAL_WBM_TQM_REL_REASON_FRAME_ACKED: ACK or BACK received for the frame
1832  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU: Command remove_mpdus initiated by SW
1833  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX: Command remove transmitted_mpdus
1834  *      initiated by sw.
1835  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX: Command remove untransmitted_mpdus
1836  *      initiated by sw.
1837  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES: Command remove aged msdus or
1838  *      mpdus.
1839  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1: Remove command initiated by
1840  *      fw with fw_reason1.
1841  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2: Remove command initiated by
1842  *      fw with fw_reason2.
1843  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3: Remove command initiated by
1844  *      fw with fw_reason3.
1845  */
1846 enum hal_wbm_tqm_rel_reason {
1847         HAL_WBM_TQM_REL_REASON_FRAME_ACKED,
1848         HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU,
1849         HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX,
1850         HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX,
1851         HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES,
1852         HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1,
1853         HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2,
1854         HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3,
1855 };
1856
1857 struct hal_wbm_buffer_ring {
1858         struct ath11k_buffer_addr buf_addr_info;
1859 };
1860
1861 enum hal_desc_owner {
1862         HAL_DESC_OWNER_WBM,
1863         HAL_DESC_OWNER_SW,
1864         HAL_DESC_OWNER_TQM,
1865         HAL_DESC_OWNER_RXDMA,
1866         HAL_DESC_OWNER_REO,
1867         HAL_DESC_OWNER_SWITCH,
1868 };
1869
1870 enum hal_desc_buf_type {
1871         HAL_DESC_BUF_TYPE_TX_MSDU_LINK,
1872         HAL_DESC_BUF_TYPE_TX_MPDU_LINK,
1873         HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_HEAD,
1874         HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_EXT,
1875         HAL_DESC_BUF_TYPE_TX_FLOW,
1876         HAL_DESC_BUF_TYPE_TX_BUFFER,
1877         HAL_DESC_BUF_TYPE_RX_MSDU_LINK,
1878         HAL_DESC_BUF_TYPE_RX_MPDU_LINK,
1879         HAL_DESC_BUF_TYPE_RX_REO_QUEUE,
1880         HAL_DESC_BUF_TYPE_RX_REO_QUEUE_EXT,
1881         HAL_DESC_BUF_TYPE_RX_BUFFER,
1882         HAL_DESC_BUF_TYPE_IDLE_LINK,
1883 };
1884
1885 #define HAL_DESC_REO_OWNED              4
1886 #define HAL_DESC_REO_QUEUE_DESC         8
1887 #define HAL_DESC_REO_QUEUE_EXT_DESC     9
1888 #define HAL_DESC_REO_NON_QOS_TID        16
1889
1890 #define HAL_DESC_HDR_INFO0_OWNER        GENMASK(3, 0)
1891 #define HAL_DESC_HDR_INFO0_BUF_TYPE     GENMASK(7, 4)
1892 #define HAL_DESC_HDR_INFO0_DBG_RESERVED GENMASK(31, 8)
1893
1894 struct hal_desc_header {
1895         u32 info0;
1896 } __packed;
1897
1898 struct hal_rx_mpdu_link_ptr {
1899         struct ath11k_buffer_addr addr_info;
1900 } __packed;
1901
1902 struct hal_rx_msdu_details {
1903         struct ath11k_buffer_addr buf_addr_info;
1904         struct rx_msdu_desc rx_msdu_info;
1905 } __packed;
1906
1907 #define HAL_RX_MSDU_LNK_INFO0_RX_QUEUE_NUMBER           GENMASK(15, 0)
1908 #define HAL_RX_MSDU_LNK_INFO0_FIRST_MSDU_LNK            BIT(16)
1909
1910 struct hal_rx_msdu_link {
1911         struct hal_desc_header desc_hdr;
1912         struct ath11k_buffer_addr buf_addr_info;
1913         u32 info0;
1914         u32 pn[4];
1915         struct hal_rx_msdu_details msdu_link[6];
1916 } __packed;
1917
1918 struct hal_rx_reo_queue_ext {
1919         struct hal_desc_header desc_hdr;
1920         u32 rsvd;
1921         struct hal_rx_mpdu_link_ptr mpdu_link[15];
1922 } __packed;
1923
1924 /* hal_rx_reo_queue_ext
1925  *      Consumer: REO
1926  *      Producer: REO
1927  *
1928  * descriptor_header
1929  *      Details about which module owns this struct.
1930  *
1931  * mpdu_link
1932  *      Pointer to the next MPDU_link descriptor in the MPDU queue.
1933  */
1934
1935 enum hal_rx_reo_queue_pn_size {
1936         HAL_RX_REO_QUEUE_PN_SIZE_24,
1937         HAL_RX_REO_QUEUE_PN_SIZE_48,
1938         HAL_RX_REO_QUEUE_PN_SIZE_128,
1939 };
1940
1941 #define HAL_RX_REO_QUEUE_RX_QUEUE_NUMBER                GENMASK(15, 0)
1942
1943 #define HAL_RX_REO_QUEUE_INFO0_VLD                      BIT(0)
1944 #define HAL_RX_REO_QUEUE_INFO0_ASSOC_LNK_DESC_COUNTER   GENMASK(2, 1)
1945 #define HAL_RX_REO_QUEUE_INFO0_DIS_DUP_DETECTION        BIT(3)
1946 #define HAL_RX_REO_QUEUE_INFO0_SOFT_REORDER_EN          BIT(4)
1947 #define HAL_RX_REO_QUEUE_INFO0_AC                       GENMASK(6, 5)
1948 #define HAL_RX_REO_QUEUE_INFO0_BAR                      BIT(7)
1949 #define HAL_RX_REO_QUEUE_INFO0_RETRY                    BIT(8)
1950 #define HAL_RX_REO_QUEUE_INFO0_CHECK_2K_MODE            BIT(9)
1951 #define HAL_RX_REO_QUEUE_INFO0_OOR_MODE                 BIT(10)
1952 #define HAL_RX_REO_QUEUE_INFO0_BA_WINDOW_SIZE           GENMASK(18, 11)
1953 #define HAL_RX_REO_QUEUE_INFO0_PN_CHECK                 BIT(19)
1954 #define HAL_RX_REO_QUEUE_INFO0_EVEN_PN                  BIT(20)
1955 #define HAL_RX_REO_QUEUE_INFO0_UNEVEN_PN                BIT(21)
1956 #define HAL_RX_REO_QUEUE_INFO0_PN_HANDLE_ENABLE         BIT(22)
1957 #define HAL_RX_REO_QUEUE_INFO0_PN_SIZE                  GENMASK(24, 23)
1958 #define HAL_RX_REO_QUEUE_INFO0_IGNORE_AMPDU_FLG         BIT(25)
1959
1960 #define HAL_RX_REO_QUEUE_INFO1_SVLD                     BIT(0)
1961 #define HAL_RX_REO_QUEUE_INFO1_SSN                      GENMASK(12, 1)
1962 #define HAL_RX_REO_QUEUE_INFO1_CURRENT_IDX              GENMASK(20, 13)
1963 #define HAL_RX_REO_QUEUE_INFO1_SEQ_2K_ERR               BIT(21)
1964 #define HAL_RX_REO_QUEUE_INFO1_PN_ERR                   BIT(22)
1965 #define HAL_RX_REO_QUEUE_INFO1_PN_VALID                 BIT(31)
1966
1967 #define HAL_RX_REO_QUEUE_INFO2_MPDU_COUNT               GENMASK(6, 0)
1968 #define HAL_RX_REO_QUEUE_INFO2_MSDU_COUNT               (31, 7)
1969
1970 #define HAL_RX_REO_QUEUE_INFO3_TIMEOUT_COUNT            GENMASK(9, 4)
1971 #define HAL_RX_REO_QUEUE_INFO3_FWD_DUE_TO_BAR_CNT       GENMASK(15, 10)
1972 #define HAL_RX_REO_QUEUE_INFO3_DUPLICATE_COUNT          GENMASK(31, 16)
1973
1974 #define HAL_RX_REO_QUEUE_INFO4_FRAME_IN_ORD_COUNT       GENMASK(23, 0)
1975 #define HAL_RX_REO_QUEUE_INFO4_BAR_RECVD_COUNT          GENMASK(31, 24)
1976
1977 #define HAL_RX_REO_QUEUE_INFO5_LATE_RX_MPDU_COUNT       GENMASK(11, 0)
1978 #define HAL_RX_REO_QUEUE_INFO5_WINDOW_JUMP_2K           GENMASK(15, 12)
1979 #define HAL_RX_REO_QUEUE_INFO5_HOLE_COUNT               GENMASK(31, 16)
1980
1981 struct hal_rx_reo_queue {
1982         struct hal_desc_header desc_hdr;
1983         u32 rx_queue_num;
1984         u32 info0;
1985         u32 info1;
1986         u32 pn[4];
1987         u32 last_rx_enqueue_timestamp;
1988         u32 last_rx_dequeue_timestamp;
1989         u32 next_aging_queue[2];
1990         u32 prev_aging_queue[2];
1991         u32 rx_bitmap[8];
1992         u32 info2;
1993         u32 info3;
1994         u32 info4;
1995         u32 processed_mpdus;
1996         u32 processed_msdus;
1997         u32 processed_total_bytes;
1998         u32 info5;
1999         u32 rsvd[3];
2000         struct hal_rx_reo_queue_ext ext_desc[];
2001 } __packed;
2002
2003 /* hal_rx_reo_queue
2004  *
2005  * descriptor_header
2006  *      Details about which module owns this struct. Note that sub field
2007  *      Buffer_type shall be set to receive_reo_queue_descriptor.
2008  *
2009  * receive_queue_number
2010  *      Indicates the MPDU queue ID to which this MPDU link descriptor belongs.
2011  *
2012  * vld
2013  *      Valid bit indicating a session is established and the queue descriptor
2014  *      is valid.
2015  * associated_link_descriptor_counter
2016  *      Indicates which of the 3 link descriptor counters shall be incremented
2017  *      or decremented when link descriptors are added or removed from this
2018  *      flow queue.
2019  * disable_duplicate_detection
2020  *      When set, do not perform any duplicate detection.
2021  * soft_reorder_enable
2022  *      When set, REO has been instructed to not perform the actual re-ordering
2023  *      of frames for this queue, but just to insert the reorder opcodes.
2024  * ac
2025  *      Indicates the access category of the queue descriptor.
2026  * bar
2027  *      Indicates if BAR has been received.
2028  * retry
2029  *      Retry bit is checked if this bit is set.
2030  * chk_2k_mode
2031  *      Indicates what type of operation is expected from Reo when the received
2032  *      frame SN falls within the 2K window.
2033  * oor_mode
2034  *      Indicates what type of operation is expected when the received frame
2035  *      falls within the OOR window.
2036  * ba_window_size
2037  *      Indicates the negotiated (window size + 1). Max of 256 bits.
2038  *
2039  *      A value 255 means 256 bitmap, 63 means 64 bitmap, 0 (means non-BA
2040  *      session, with window size of 0). The 3 values here are the main values
2041  *      validated, but other values should work as well.
2042  *
2043  *      A BA window size of 0 (=> one frame entry bitmat), means that there is
2044  *      no additional rx_reo_queue_ext desc. following rx_reo_queue in memory.
2045  *      A BA window size of 1 - 105, means that there is 1 rx_reo_queue_ext.
2046  *      A BA window size of 106 - 210, means that there are 2 rx_reo_queue_ext.
2047  *      A BA window size of 211 - 256, means that there are 3 rx_reo_queue_ext.
2048  * pn_check_needed, pn_shall_be_even, pn_shall_be_uneven, pn_handling_enable,
2049  * pn_size
2050  *      REO shall perform the PN increment check, even number check, uneven
2051  *      number check, PN error check and size of the PN field check.
2052  * ignore_ampdu_flag
2053  *      REO shall ignore the ampdu_flag on entrance descriptor for this queue.
2054  *
2055  * svld
2056  *      Sequence number in next field is valid one.
2057  * ssn
2058  *       Starting Sequence number of the session.
2059  * current_index
2060  *      Points to last forwarded packet
2061  * seq_2k_error_detected_flag
2062  *      REO has detected a 2k error jump in the sequence number and from that
2063  *      moment forward, all new frames are forwarded directly to FW, without
2064  *      duplicate detect, reordering, etc.
2065  * pn_error_detected_flag
2066  *      REO has detected a PN error.
2067  */
2068
2069 #define HAL_REO_UPD_RX_QUEUE_INFO0_QUEUE_ADDR_HI                GENMASK(7, 0)
2070 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RX_QUEUE_NUM             BIT(8)
2071 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_VLD                      BIT(9)
2072 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_ASSOC_LNK_DESC_CNT       BIT(10)
2073 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_DIS_DUP_DETECTION        BIT(11)
2074 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SOFT_REORDER_EN          BIT(12)
2075 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_AC                       BIT(13)
2076 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BAR                      BIT(14)
2077 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RETRY                    BIT(15)
2078 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_CHECK_2K_MODE            BIT(16)
2079 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_OOR_MODE                 BIT(17)
2080 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BA_WINDOW_SIZE           BIT(18)
2081 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_CHECK                 BIT(19)
2082 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_EVEN_PN                  BIT(20)
2083 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_UNEVEN_PN                BIT(21)
2084 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_HANDLE_ENABLE         BIT(22)
2085 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_SIZE                  BIT(23)
2086 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_IGNORE_AMPDU_FLG         BIT(24)
2087 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SVLD                     BIT(25)
2088 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SSN                      BIT(26)
2089 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SEQ_2K_ERR               BIT(27)
2090 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_ERR                   BIT(28)
2091 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_VALID                 BIT(29)
2092 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN                       BIT(30)
2093
2094 #define HAL_REO_UPD_RX_QUEUE_INFO1_RX_QUEUE_NUMBER              GENMASK(15, 0)
2095 #define HAL_REO_UPD_RX_QUEUE_INFO1_VLD                          BIT(16)
2096 #define HAL_REO_UPD_RX_QUEUE_INFO1_ASSOC_LNK_DESC_COUNTER       GENMASK(18, 17)
2097 #define HAL_REO_UPD_RX_QUEUE_INFO1_DIS_DUP_DETECTION            BIT(19)
2098 #define HAL_REO_UPD_RX_QUEUE_INFO1_SOFT_REORDER_EN              BIT(20)
2099 #define HAL_REO_UPD_RX_QUEUE_INFO1_AC                           GENMASK(22, 21)
2100 #define HAL_REO_UPD_RX_QUEUE_INFO1_BAR                          BIT(23)
2101 #define HAL_REO_UPD_RX_QUEUE_INFO1_RETRY                        BIT(24)
2102 #define HAL_REO_UPD_RX_QUEUE_INFO1_CHECK_2K_MODE                BIT(25)
2103 #define HAL_REO_UPD_RX_QUEUE_INFO1_OOR_MODE                     BIT(26)
2104 #define HAL_REO_UPD_RX_QUEUE_INFO1_PN_CHECK                     BIT(27)
2105 #define HAL_REO_UPD_RX_QUEUE_INFO1_EVEN_PN                      BIT(28)
2106 #define HAL_REO_UPD_RX_QUEUE_INFO1_UNEVEN_PN                    BIT(29)
2107 #define HAL_REO_UPD_RX_QUEUE_INFO1_PN_HANDLE_ENABLE             BIT(30)
2108 #define HAL_REO_UPD_RX_QUEUE_INFO1_IGNORE_AMPDU_FLG             BIT(31)
2109
2110 #define HAL_REO_UPD_RX_QUEUE_INFO2_BA_WINDOW_SIZE               GENMASK(7, 0)
2111 #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_SIZE                      GENMASK(9, 8)
2112 #define HAL_REO_UPD_RX_QUEUE_INFO2_SVLD                         BIT(10)
2113 #define HAL_REO_UPD_RX_QUEUE_INFO2_SSN                          GENMASK(22, 11)
2114 #define HAL_REO_UPD_RX_QUEUE_INFO2_SEQ_2K_ERR                   BIT(23)
2115 #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_ERR                       BIT(24)
2116 #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_VALID                     BIT(25)
2117
2118 struct hal_reo_update_rx_queue {
2119         struct hal_reo_cmd_hdr cmd;
2120         u32 queue_addr_lo;
2121         u32 info0;
2122         u32 info1;
2123         u32 info2;
2124         u32 pn[4];
2125 } __packed;
2126
2127 #define HAL_REO_UNBLOCK_CACHE_INFO0_UNBLK_CACHE         BIT(0)
2128 #define HAL_REO_UNBLOCK_CACHE_INFO0_RESOURCE_IDX        GENMASK(2, 1)
2129
2130 struct hal_reo_unblock_cache {
2131         struct hal_reo_cmd_hdr cmd;
2132         u32 info0;
2133         u32 rsvd[7];
2134 } __packed;
2135
2136 enum hal_reo_exec_status {
2137         HAL_REO_EXEC_STATUS_SUCCESS,
2138         HAL_REO_EXEC_STATUS_BLOCKED,
2139         HAL_REO_EXEC_STATUS_FAILED,
2140         HAL_REO_EXEC_STATUS_RESOURCE_BLOCKED,
2141 };
2142
2143 #define HAL_REO_STATUS_HDR_INFO0_STATUS_NUM     GENMASK(15, 0)
2144 #define HAL_REO_STATUS_HDR_INFO0_EXEC_TIME      GENMASK(25, 16)
2145 #define HAL_REO_STATUS_HDR_INFO0_EXEC_STATUS    GENMASK(27, 26)
2146
2147 struct hal_reo_status_hdr {
2148         u32 info0;
2149         u32 timestamp;
2150 } __packed;
2151
2152 /* hal_reo_status_hdr
2153  *              Producer: REO
2154  *              Consumer: SW
2155  *
2156  * status_num
2157  *              The value in this field is equal to value of the reo command
2158  *              number. This field helps to correlate the statuses with the REO
2159  *              commands.
2160  *
2161  * execution_time (in us)
2162  *              The amount of time REO took to execute the command. Note that
2163  *              this time does not include the duration of the command waiting
2164  *              in the command ring, before the execution started.
2165  *
2166  * execution_status
2167  *              Execution status of the command. Values are defined in
2168  *              enum %HAL_REO_EXEC_STATUS_.
2169  */
2170 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_SSN                GENMASK(11, 0)
2171 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_CUR_IDX            GENMASK(19, 12)
2172
2173 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MPDU_COUNT         GENMASK(6, 0)
2174 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MSDU_COUNT         GENMASK(31, 7)
2175
2176 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_TIMEOUT_COUNT      GENMASK(9, 4)
2177 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_FDTB_COUNT         GENMASK(15, 10)
2178 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_DUPLICATE_COUNT    GENMASK(31, 16)
2179
2180 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_FIO_COUNT          GENMASK(23, 0)
2181 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_BAR_RCVD_CNT       GENMASK(31, 24)
2182
2183 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_LATE_RX_MPDU       GENMASK(11, 0)
2184 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_WINDOW_JMP2K       GENMASK(15, 12)
2185 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_HOLE_COUNT         GENMASK(31, 16)
2186
2187 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO5_LOOPING_CNT        GENMASK(31, 28)
2188
2189 struct hal_reo_get_queue_stats_status {
2190         struct hal_reo_status_hdr hdr;
2191         u32 info0;
2192         u32 pn[4];
2193         u32 last_rx_enqueue_timestamp;
2194         u32 last_rx_dequeue_timestamp;
2195         u32 rx_bitmap[8];
2196         u32 info1;
2197         u32 info2;
2198         u32 info3;
2199         u32 num_mpdu_frames;
2200         u32 num_msdu_frames;
2201         u32 total_bytes;
2202         u32 info4;
2203         u32 info5;
2204 } __packed;
2205
2206 /* hal_reo_get_queue_stats_status
2207  *              Producer: REO
2208  *              Consumer: SW
2209  *
2210  * status_hdr
2211  *              Details that can link this status with the original command. It
2212  *              also contains info on how long REO took to execute this command.
2213  *
2214  * ssn
2215  *              Starting Sequence number of the session, this changes whenever
2216  *              window moves (can be filled by SW then maintained by REO).
2217  *
2218  * current_index
2219  *              Points to last forwarded packet.
2220  *
2221  * pn
2222  *              Bits of the PN number.
2223  *
2224  * last_rx_enqueue_timestamp
2225  * last_rx_dequeue_timestamp
2226  *              Timestamp of arrival of the last MPDU for this queue and
2227  *              Timestamp of forwarding an MPDU accordingly.
2228  *
2229  * rx_bitmap
2230  *              When a bit is set, the corresponding frame is currently held
2231  *              in the re-order queue. The bitmap  is Fully managed by HW.
2232  *
2233  * current_mpdu_count
2234  * current_msdu_count
2235  *              The number of MPDUs and MSDUs in the queue.
2236  *
2237  * timeout_count
2238  *              The number of times REO started forwarding frames even though
2239  *              there is a hole in the bitmap. Forwarding reason is timeout.
2240  *
2241  * forward_due_to_bar_count
2242  *              The number of times REO started forwarding frames even though
2243  *              there is a hole in the bitmap. Fwd reason is reception of BAR.
2244  *
2245  * duplicate_count
2246  *              The number of duplicate frames that have been detected.
2247  *
2248  * frames_in_order_count
2249  *              The number of frames that have been received in order (without
2250  *              a hole that prevented them from being forwarded immediately).
2251  *
2252  * bar_received_count
2253  *              The number of times a BAR frame is received.
2254  *
2255  * mpdu_frames_processed_count
2256  * msdu_frames_processed_count
2257  *              The total number of MPDU/MSDU frames that have been processed.
2258  *
2259  * total_bytes
2260  *              An approximation of the number of bytes received for this queue.
2261  *
2262  * late_receive_mpdu_count
2263  *              The number of MPDUs received after the window had already moved
2264  *              on. The 'late' sequence window is defined as
2265  *              (Window SSN - 256) - (Window SSN - 1).
2266  *
2267  * window_jump_2k
2268  *              The number of times the window moved more than 2K
2269  *
2270  * hole_count
2271  *              The number of times a hole was created in the receive bitmap.
2272  *
2273  * looping_count
2274  *              A count value that indicates the number of times the producer of
2275  *              entries into this Ring has looped around the ring.
2276  */
2277
2278 #define HAL_REO_STATUS_LOOP_CNT                 GENMASK(31, 28)
2279
2280 #define HAL_REO_FLUSH_QUEUE_INFO0_ERR_DETECTED  BIT(0)
2281 #define HAL_REO_FLUSH_QUEUE_INFO0_RSVD          GENMASK(31, 1)
2282 #define HAL_REO_FLUSH_QUEUE_INFO1_RSVD          GENMASK(27, 0)
2283
2284 struct hal_reo_flush_queue_status {
2285         struct hal_reo_status_hdr hdr;
2286         u32 info0;
2287         u32 rsvd0[21];
2288         u32 info1;
2289 } __packed;
2290
2291 /* hal_reo_flush_queue_status
2292  *              Producer: REO
2293  *              Consumer: SW
2294  *
2295  * status_hdr
2296  *              Details that can link this status with the original command. It
2297  *              also contains info on how long REO took to execute this command.
2298  *
2299  * error_detected
2300  *              Status of blocking resource
2301  *
2302  *              0 - No error has been detected while executing this command
2303  *              1 - Error detected. The resource to be used for blocking was
2304  *                  already in use.
2305  *
2306  * looping_count
2307  *              A count value that indicates the number of times the producer of
2308  *              entries into this Ring has looped around the ring.
2309  */
2310
2311 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_IS_ERR                 BIT(0)
2312 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_BLOCK_ERR_CODE         GENMASK(2, 1)
2313 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_STATUS_HIT       BIT(8)
2314 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_DESC_TYPE        GENMASK(11, 9)
2315 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_CLIENT_ID        GENMASK(15, 12)
2316 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_ERR              GENMASK(17, 16)
2317 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_COUNT            GENMASK(25, 18)
2318
2319 struct hal_reo_flush_cache_status {
2320         struct hal_reo_status_hdr hdr;
2321         u32 info0;
2322         u32 rsvd0[21];
2323         u32 info1;
2324 } __packed;
2325
2326 /* hal_reo_flush_cache_status
2327  *              Producer: REO
2328  *              Consumer: SW
2329  *
2330  * status_hdr
2331  *              Details that can link this status with the original command. It
2332  *              also contains info on how long REO took to execute this command.
2333  *
2334  * error_detected
2335  *              Status for blocking resource handling
2336  *
2337  *              0 - No error has been detected while executing this command
2338  *              1 - An error in the blocking resource management was detected
2339  *
2340  * block_error_details
2341  *              only valid when error_detected is set
2342  *
2343  *              0 - No blocking related errors found
2344  *              1 - Blocking resource is already in use
2345  *              2 - Resource requested to be unblocked, was not blocked
2346  *
2347  * cache_controller_flush_status_hit
2348  *              The status that the cache controller returned on executing the
2349  *              flush command.
2350  *
2351  *              0 - miss; 1 - hit
2352  *
2353  * cache_controller_flush_status_desc_type
2354  *              Flush descriptor type
2355  *
2356  * cache_controller_flush_status_client_id
2357  *              Module who made the flush request
2358  *
2359  *              In REO, this is always 0
2360  *
2361  * cache_controller_flush_status_error
2362  *              Error condition
2363  *
2364  *              0 - No error found
2365  *              1 - HW interface is still busy
2366  *              2 - Line currently locked. Used for one line flush command
2367  *              3 - At least one line is still locked.
2368  *                  Used for cache flush command.
2369  *
2370  * cache_controller_flush_count
2371  *              The number of lines that were actually flushed out
2372  *
2373  * looping_count
2374  *              A count value that indicates the number of times the producer of
2375  *              entries into this Ring has looped around the ring.
2376  */
2377
2378 #define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_IS_ERR       BIT(0)
2379 #define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_TYPE         BIT(1)
2380
2381 struct hal_reo_unblock_cache_status {
2382         struct hal_reo_status_hdr hdr;
2383         u32 info0;
2384         u32 rsvd0[21];
2385         u32 info1;
2386 } __packed;
2387
2388 /* hal_reo_unblock_cache_status
2389  *              Producer: REO
2390  *              Consumer: SW
2391  *
2392  * status_hdr
2393  *              Details that can link this status with the original command. It
2394  *              also contains info on how long REO took to execute this command.
2395  *
2396  * error_detected
2397  *              0 - No error has been detected while executing this command
2398  *              1 - The blocking resource was not in use, and therefore it could
2399  *                  not be unblocked.
2400  *
2401  * unblock_type
2402  *              Reference to the type of unblock command
2403  *              0 - Unblock a blocking resource
2404  *              1 - The entire cache usage is unblock
2405  *
2406  * looping_count
2407  *              A count value that indicates the number of times the producer of
2408  *              entries into this Ring has looped around the ring.
2409  */
2410
2411 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_IS_ERR               BIT(0)
2412 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_LIST_EMPTY           BIT(1)
2413
2414 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_REL_DESC_COUNT       GENMASK(15, 0)
2415 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_FWD_BUF_COUNT        GENMASK(31, 16)
2416
2417 struct hal_reo_flush_timeout_list_status {
2418         struct hal_reo_status_hdr hdr;
2419         u32 info0;
2420         u32 info1;
2421         u32 rsvd0[20];
2422         u32 info2;
2423 } __packed;
2424
2425 /* hal_reo_flush_timeout_list_status
2426  *              Producer: REO
2427  *              Consumer: SW
2428  *
2429  * status_hdr
2430  *              Details that can link this status with the original command. It
2431  *              also contains info on how long REO took to execute this command.
2432  *
2433  * error_detected
2434  *              0 - No error has been detected while executing this command
2435  *              1 - Command not properly executed and returned with error
2436  *
2437  * timeout_list_empty
2438  *              When set, REO has depleted the timeout list and all entries are
2439  *              gone.
2440  *
2441  * release_desc_count
2442  *              Producer: SW; Consumer: REO
2443  *              The number of link descriptor released
2444  *
2445  * forward_buf_count
2446  *              Producer: SW; Consumer: REO
2447  *              The number of buffers forwarded to the REO destination rings
2448  *
2449  * looping_count
2450  *              A count value that indicates the number of times the producer of
2451  *              entries into this Ring has looped around the ring.
2452  */
2453
2454 #define HAL_REO_DESC_THRESH_STATUS_INFO0_THRESH_INDEX           GENMASK(1, 0)
2455 #define HAL_REO_DESC_THRESH_STATUS_INFO1_LINK_DESC_COUNTER0     GENMASK(23, 0)
2456 #define HAL_REO_DESC_THRESH_STATUS_INFO2_LINK_DESC_COUNTER1     GENMASK(23, 0)
2457 #define HAL_REO_DESC_THRESH_STATUS_INFO3_LINK_DESC_COUNTER2     GENMASK(23, 0)
2458 #define HAL_REO_DESC_THRESH_STATUS_INFO4_LINK_DESC_COUNTER_SUM  GENMASK(25, 0)
2459
2460 struct hal_reo_desc_thresh_reached_status {
2461         struct hal_reo_status_hdr hdr;
2462         u32 info0;
2463         u32 info1;
2464         u32 info2;
2465         u32 info3;
2466         u32 info4;
2467         u32 rsvd0[17];
2468         u32 info5;
2469 } __packed;
2470
2471 /* hal_reo_desc_thresh_reached_status
2472  *              Producer: REO
2473  *              Consumer: SW
2474  *
2475  * status_hdr
2476  *              Details that can link this status with the original command. It
2477  *              also contains info on how long REO took to execute this command.
2478  *
2479  * threshold_index
2480  *              The index of the threshold register whose value got reached
2481  *
2482  * link_descriptor_counter0
2483  * link_descriptor_counter1
2484  * link_descriptor_counter2
2485  * link_descriptor_counter_sum
2486  *              Value of the respective counters at generation of this message
2487  *
2488  * looping_count
2489  *              A count value that indicates the number of times the producer of
2490  *              entries into this Ring has looped around the ring.
2491  */
2492
2493 #endif /* ATH11K_HAL_DESC_H */