2 * Copyright (c) 2005-2011 Atheros Communications Inc.
3 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
5 * Permission to use, copy, modify, and/or distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
21 #include <linux/types.h>
22 #include <net/mac80211.h>
25 * This file specifies the WMI interface for the Unified Software
28 * It includes definitions of all the commands and events. Commands are
29 * messages from the host to the target. Events and Replies are messages
30 * from the target to the host.
32 * Ownership of correctness in regards to WMI commands belongs to the host
33 * driver and the target is not required to validate parameters for value,
34 * proper range, or any other checking.
36 * Guidelines for extending this interface are below.
38 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
40 * 2. Use ONLY u32 type for defining member variables within WMI
41 * command/event structures. Do not use u8, u16, bool or
42 * enum types within these structures.
44 * 3. DO NOT define bit fields within structures. Implement bit fields
45 * using masks if necessary. Do not use the programming language's bit
48 * 4. Define macros for encode/decode of u8, u16 fields within
49 * the u32 variables. Use these macros for set/get of these fields.
50 * Try to use this to optimize the structure without bloating it with
51 * u32 variables for every lower sized field.
53 * 5. Do not use PACK/UNPACK attributes for the structures as each member
54 * variable is already 4-byte aligned by virtue of being a u32
57 * 6. Comment each parameter part of the WMI command/event structure by
58 * using the 2 stars at the begining of C comment instead of one star to
59 * enable HTML document generation using Doxygen.
68 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF
69 #define WMI_CMD_HDR_CMD_ID_LSB 0
70 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
71 #define WMI_CMD_HDR_PLT_PRIV_LSB 24
73 #define HTC_PROTOCOL_VERSION 0x0002
74 #define WMI_PROTOCOL_VERSION 0x0002
77 * There is no signed version of __le32, so for a temporary solution come
78 * up with our own version. The idea is from fs/ntfs/types.h.
80 * Use a_ prefix so that it doesn't conflict if we get proper support to
83 typedef __s32 __bitwise a_sle32;
85 static inline a_sle32 a_cpu_to_sle32(s32 val)
87 return (__force a_sle32)cpu_to_le32(val);
90 static inline s32 a_sle32_to_cpu(a_sle32 val)
92 return le32_to_cpu((__force __le32)val);
96 WMI_SERVICE_BEACON_OFFLOAD = 0,
97 WMI_SERVICE_SCAN_OFFLOAD,
98 WMI_SERVICE_ROAM_OFFLOAD,
99 WMI_SERVICE_BCN_MISS_OFFLOAD,
100 WMI_SERVICE_STA_PWRSAVE,
101 WMI_SERVICE_STA_ADVANCED_PWRSAVE,
102 WMI_SERVICE_AP_UAPSD,
105 WMI_SERVICE_BLOCKACK,
107 WMI_SERVICE_BCN_FILTER,
109 WMI_SERVICE_RATECTRL,
111 WMI_SERVICE_RATECTRL_CACHE,
112 WMI_SERVICE_IRAM_TIDS,
113 WMI_SERVICE_ARPNS_OFFLOAD,
115 WMI_SERVICE_GTK_OFFLOAD,
116 WMI_SERVICE_SCAN_SCH,
117 WMI_SERVICE_CSA_OFFLOAD,
119 WMI_SERVICE_COEX_FREQAVOID,
120 WMI_SERVICE_PACKET_POWER_SAVE,
121 WMI_SERVICE_FORCE_FW_HANG,
123 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
124 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
125 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
126 WMI_SERVICE_STA_KEEP_ALIVE,
127 WMI_SERVICE_TX_ENCAP,
129 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
130 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
131 WMI_SERVICE_ROAM_SCAN_OFFLOAD,
132 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
133 WMI_SERVICE_EARLY_RX,
134 WMI_SERVICE_STA_SMPS,
136 WMI_SERVICE_STA_WMMAC,
138 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
139 WMI_SERVICE_ADAPTIVE_OCS,
140 WMI_SERVICE_BA_SSN_SUPPORT,
141 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
143 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
144 WMI_SERVICE_BATCH_SCAN,
147 WMI_SERVICE_THERMAL_MGMT,
149 WMI_SERVICE_MHF_OFFLOAD,
150 WMI_SERVICE_COEX_SAR,
151 WMI_SERVICE_BCN_TXRATE_OVERRIDE,
153 WMI_SERVICE_L1SS_STAT,
154 WMI_SERVICE_ESTIMATE_LINKSPEED,
155 WMI_SERVICE_OBSS_SCAN,
156 WMI_SERVICE_TDLS_OFFCHAN,
157 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
158 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
159 WMI_SERVICE_IBSS_PWRSAVE,
163 WMI_SERVICE_HSOFFLOAD,
164 WMI_SERVICE_ROAM_HO_OFFLOAD,
165 WMI_SERVICE_RX_FULL_REORDER,
166 WMI_SERVICE_DHCP_OFFLOAD,
167 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
168 WMI_SERVICE_MDNS_OFFLOAD,
169 WMI_SERVICE_SAP_AUTH_OFFLOAD,
171 WMI_SERVICE_COEX_GPIO,
172 WMI_SERVICE_ENHANCED_PROXY_STA,
174 WMI_SERVICE_PEER_CACHING,
175 WMI_SERVICE_AUX_SPECTRAL_INTF,
176 WMI_SERVICE_AUX_CHAN_LOAD_INTF,
177 WMI_SERVICE_BSS_CHANNEL_INFO_64,
178 WMI_SERVICE_EXT_RES_CFG_SUPPORT,
179 WMI_SERVICE_MESH_11S,
180 WMI_SERVICE_MESH_NON_11S,
181 WMI_SERVICE_PEER_STATS,
182 WMI_SERVICE_RESTRT_CHNL_SUPPORT,
188 enum wmi_10x_service {
189 WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
190 WMI_10X_SERVICE_SCAN_OFFLOAD,
191 WMI_10X_SERVICE_ROAM_OFFLOAD,
192 WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
193 WMI_10X_SERVICE_STA_PWRSAVE,
194 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
195 WMI_10X_SERVICE_AP_UAPSD,
196 WMI_10X_SERVICE_AP_DFS,
197 WMI_10X_SERVICE_11AC,
198 WMI_10X_SERVICE_BLOCKACK,
199 WMI_10X_SERVICE_PHYERR,
200 WMI_10X_SERVICE_BCN_FILTER,
202 WMI_10X_SERVICE_RATECTRL,
204 WMI_10X_SERVICE_RATECTRL_CACHE,
205 WMI_10X_SERVICE_IRAM_TIDS,
206 WMI_10X_SERVICE_BURST,
208 /* introduced in 10.2 */
209 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
210 WMI_10X_SERVICE_FORCE_FW_HANG,
211 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
213 WMI_10X_SERVICE_COEX_GPIO,
214 WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
215 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
216 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
217 WMI_10X_SERVICE_MESH,
218 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
219 WMI_10X_SERVICE_PEER_STATS,
222 enum wmi_main_service {
223 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
224 WMI_MAIN_SERVICE_SCAN_OFFLOAD,
225 WMI_MAIN_SERVICE_ROAM_OFFLOAD,
226 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
227 WMI_MAIN_SERVICE_STA_PWRSAVE,
228 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
229 WMI_MAIN_SERVICE_AP_UAPSD,
230 WMI_MAIN_SERVICE_AP_DFS,
231 WMI_MAIN_SERVICE_11AC,
232 WMI_MAIN_SERVICE_BLOCKACK,
233 WMI_MAIN_SERVICE_PHYERR,
234 WMI_MAIN_SERVICE_BCN_FILTER,
235 WMI_MAIN_SERVICE_RTT,
236 WMI_MAIN_SERVICE_RATECTRL,
237 WMI_MAIN_SERVICE_WOW,
238 WMI_MAIN_SERVICE_RATECTRL_CACHE,
239 WMI_MAIN_SERVICE_IRAM_TIDS,
240 WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
241 WMI_MAIN_SERVICE_NLO,
242 WMI_MAIN_SERVICE_GTK_OFFLOAD,
243 WMI_MAIN_SERVICE_SCAN_SCH,
244 WMI_MAIN_SERVICE_CSA_OFFLOAD,
245 WMI_MAIN_SERVICE_CHATTER,
246 WMI_MAIN_SERVICE_COEX_FREQAVOID,
247 WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
248 WMI_MAIN_SERVICE_FORCE_FW_HANG,
249 WMI_MAIN_SERVICE_GPIO,
250 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
251 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
252 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
253 WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
254 WMI_MAIN_SERVICE_TX_ENCAP,
257 enum wmi_10_4_service {
258 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
259 WMI_10_4_SERVICE_SCAN_OFFLOAD,
260 WMI_10_4_SERVICE_ROAM_OFFLOAD,
261 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
262 WMI_10_4_SERVICE_STA_PWRSAVE,
263 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
264 WMI_10_4_SERVICE_AP_UAPSD,
265 WMI_10_4_SERVICE_AP_DFS,
266 WMI_10_4_SERVICE_11AC,
267 WMI_10_4_SERVICE_BLOCKACK,
268 WMI_10_4_SERVICE_PHYERR,
269 WMI_10_4_SERVICE_BCN_FILTER,
270 WMI_10_4_SERVICE_RTT,
271 WMI_10_4_SERVICE_RATECTRL,
272 WMI_10_4_SERVICE_WOW,
273 WMI_10_4_SERVICE_RATECTRL_CACHE,
274 WMI_10_4_SERVICE_IRAM_TIDS,
275 WMI_10_4_SERVICE_BURST,
276 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
277 WMI_10_4_SERVICE_GTK_OFFLOAD,
278 WMI_10_4_SERVICE_SCAN_SCH,
279 WMI_10_4_SERVICE_CSA_OFFLOAD,
280 WMI_10_4_SERVICE_CHATTER,
281 WMI_10_4_SERVICE_COEX_FREQAVOID,
282 WMI_10_4_SERVICE_PACKET_POWER_SAVE,
283 WMI_10_4_SERVICE_FORCE_FW_HANG,
284 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
285 WMI_10_4_SERVICE_GPIO,
286 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
287 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
288 WMI_10_4_SERVICE_STA_KEEP_ALIVE,
289 WMI_10_4_SERVICE_TX_ENCAP,
290 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
291 WMI_10_4_SERVICE_EARLY_RX,
292 WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
294 WMI_10_4_SERVICE_ATF,
295 WMI_10_4_SERVICE_PEER_CACHING,
296 WMI_10_4_SERVICE_COEX_GPIO,
297 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
298 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
299 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
300 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
301 WMI_10_4_SERVICE_MESH_NON_11S,
302 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
303 WMI_10_4_SERVICE_PEER_STATS,
304 WMI_10_4_SERVICE_MESH_11S,
307 static inline char *wmi_service_name(int service_id)
309 #define SVCSTR(x) case x: return #x
311 switch (service_id) {
312 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
313 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
314 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
315 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
316 SVCSTR(WMI_SERVICE_STA_PWRSAVE);
317 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
318 SVCSTR(WMI_SERVICE_AP_UAPSD);
319 SVCSTR(WMI_SERVICE_AP_DFS);
320 SVCSTR(WMI_SERVICE_11AC);
321 SVCSTR(WMI_SERVICE_BLOCKACK);
322 SVCSTR(WMI_SERVICE_PHYERR);
323 SVCSTR(WMI_SERVICE_BCN_FILTER);
324 SVCSTR(WMI_SERVICE_RTT);
325 SVCSTR(WMI_SERVICE_RATECTRL);
326 SVCSTR(WMI_SERVICE_WOW);
327 SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
328 SVCSTR(WMI_SERVICE_IRAM_TIDS);
329 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
330 SVCSTR(WMI_SERVICE_NLO);
331 SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
332 SVCSTR(WMI_SERVICE_SCAN_SCH);
333 SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
334 SVCSTR(WMI_SERVICE_CHATTER);
335 SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
336 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
337 SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
338 SVCSTR(WMI_SERVICE_GPIO);
339 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
340 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
341 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
342 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
343 SVCSTR(WMI_SERVICE_TX_ENCAP);
344 SVCSTR(WMI_SERVICE_BURST);
345 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
346 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
347 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
348 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
349 SVCSTR(WMI_SERVICE_EARLY_RX);
350 SVCSTR(WMI_SERVICE_STA_SMPS);
351 SVCSTR(WMI_SERVICE_FWTEST);
352 SVCSTR(WMI_SERVICE_STA_WMMAC);
353 SVCSTR(WMI_SERVICE_TDLS);
354 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
355 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
356 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
357 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
358 SVCSTR(WMI_SERVICE_WLAN_HB);
359 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
360 SVCSTR(WMI_SERVICE_BATCH_SCAN);
361 SVCSTR(WMI_SERVICE_QPOWER);
362 SVCSTR(WMI_SERVICE_PLMREQ);
363 SVCSTR(WMI_SERVICE_THERMAL_MGMT);
364 SVCSTR(WMI_SERVICE_RMC);
365 SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
366 SVCSTR(WMI_SERVICE_COEX_SAR);
367 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
368 SVCSTR(WMI_SERVICE_NAN);
369 SVCSTR(WMI_SERVICE_L1SS_STAT);
370 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
371 SVCSTR(WMI_SERVICE_OBSS_SCAN);
372 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
373 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
374 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
375 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
376 SVCSTR(WMI_SERVICE_LPASS);
377 SVCSTR(WMI_SERVICE_EXTSCAN);
378 SVCSTR(WMI_SERVICE_D0WOW);
379 SVCSTR(WMI_SERVICE_HSOFFLOAD);
380 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
381 SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
382 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
383 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
384 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
385 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
386 SVCSTR(WMI_SERVICE_ATF);
387 SVCSTR(WMI_SERVICE_COEX_GPIO);
388 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
389 SVCSTR(WMI_SERVICE_TT);
390 SVCSTR(WMI_SERVICE_PEER_CACHING);
391 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
392 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
393 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
394 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
395 SVCSTR(WMI_SERVICE_MESH_11S);
396 SVCSTR(WMI_SERVICE_MESH_NON_11S);
397 SVCSTR(WMI_SERVICE_PEER_STATS);
398 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
406 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
407 ((svc_id) < (len) && \
408 __le32_to_cpu((wmi_svc_bmap)[(svc_id)/(sizeof(u32))]) & \
409 BIT((svc_id)%(sizeof(u32))))
411 #define SVCMAP(x, y, len) \
413 if (WMI_SERVICE_IS_ENABLED((in), (x), (len))) \
417 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
420 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
421 WMI_SERVICE_BEACON_OFFLOAD, len);
422 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
423 WMI_SERVICE_SCAN_OFFLOAD, len);
424 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
425 WMI_SERVICE_ROAM_OFFLOAD, len);
426 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
427 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
428 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
429 WMI_SERVICE_STA_PWRSAVE, len);
430 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
431 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
432 SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
433 WMI_SERVICE_AP_UAPSD, len);
434 SVCMAP(WMI_10X_SERVICE_AP_DFS,
435 WMI_SERVICE_AP_DFS, len);
436 SVCMAP(WMI_10X_SERVICE_11AC,
437 WMI_SERVICE_11AC, len);
438 SVCMAP(WMI_10X_SERVICE_BLOCKACK,
439 WMI_SERVICE_BLOCKACK, len);
440 SVCMAP(WMI_10X_SERVICE_PHYERR,
441 WMI_SERVICE_PHYERR, len);
442 SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
443 WMI_SERVICE_BCN_FILTER, len);
444 SVCMAP(WMI_10X_SERVICE_RTT,
445 WMI_SERVICE_RTT, len);
446 SVCMAP(WMI_10X_SERVICE_RATECTRL,
447 WMI_SERVICE_RATECTRL, len);
448 SVCMAP(WMI_10X_SERVICE_WOW,
449 WMI_SERVICE_WOW, len);
450 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
451 WMI_SERVICE_RATECTRL_CACHE, len);
452 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
453 WMI_SERVICE_IRAM_TIDS, len);
454 SVCMAP(WMI_10X_SERVICE_BURST,
455 WMI_SERVICE_BURST, len);
456 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
457 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
458 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
459 WMI_SERVICE_FORCE_FW_HANG, len);
460 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
461 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
462 SVCMAP(WMI_10X_SERVICE_ATF,
463 WMI_SERVICE_ATF, len);
464 SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
465 WMI_SERVICE_COEX_GPIO, len);
466 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
467 WMI_SERVICE_AUX_SPECTRAL_INTF, len);
468 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
469 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
470 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
471 WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
472 SVCMAP(WMI_10X_SERVICE_MESH,
473 WMI_SERVICE_MESH_11S, len);
474 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
475 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
476 SVCMAP(WMI_10X_SERVICE_PEER_STATS,
477 WMI_SERVICE_PEER_STATS, len);
480 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
483 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
484 WMI_SERVICE_BEACON_OFFLOAD, len);
485 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
486 WMI_SERVICE_SCAN_OFFLOAD, len);
487 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
488 WMI_SERVICE_ROAM_OFFLOAD, len);
489 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
490 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
491 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
492 WMI_SERVICE_STA_PWRSAVE, len);
493 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
494 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
495 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
496 WMI_SERVICE_AP_UAPSD, len);
497 SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
498 WMI_SERVICE_AP_DFS, len);
499 SVCMAP(WMI_MAIN_SERVICE_11AC,
500 WMI_SERVICE_11AC, len);
501 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
502 WMI_SERVICE_BLOCKACK, len);
503 SVCMAP(WMI_MAIN_SERVICE_PHYERR,
504 WMI_SERVICE_PHYERR, len);
505 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
506 WMI_SERVICE_BCN_FILTER, len);
507 SVCMAP(WMI_MAIN_SERVICE_RTT,
508 WMI_SERVICE_RTT, len);
509 SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
510 WMI_SERVICE_RATECTRL, len);
511 SVCMAP(WMI_MAIN_SERVICE_WOW,
512 WMI_SERVICE_WOW, len);
513 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
514 WMI_SERVICE_RATECTRL_CACHE, len);
515 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
516 WMI_SERVICE_IRAM_TIDS, len);
517 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
518 WMI_SERVICE_ARPNS_OFFLOAD, len);
519 SVCMAP(WMI_MAIN_SERVICE_NLO,
520 WMI_SERVICE_NLO, len);
521 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
522 WMI_SERVICE_GTK_OFFLOAD, len);
523 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
524 WMI_SERVICE_SCAN_SCH, len);
525 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
526 WMI_SERVICE_CSA_OFFLOAD, len);
527 SVCMAP(WMI_MAIN_SERVICE_CHATTER,
528 WMI_SERVICE_CHATTER, len);
529 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
530 WMI_SERVICE_COEX_FREQAVOID, len);
531 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
532 WMI_SERVICE_PACKET_POWER_SAVE, len);
533 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
534 WMI_SERVICE_FORCE_FW_HANG, len);
535 SVCMAP(WMI_MAIN_SERVICE_GPIO,
536 WMI_SERVICE_GPIO, len);
537 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
538 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
539 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
540 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
541 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
542 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
543 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
544 WMI_SERVICE_STA_KEEP_ALIVE, len);
545 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
546 WMI_SERVICE_TX_ENCAP, len);
549 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
552 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
553 WMI_SERVICE_BEACON_OFFLOAD, len);
554 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
555 WMI_SERVICE_SCAN_OFFLOAD, len);
556 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
557 WMI_SERVICE_ROAM_OFFLOAD, len);
558 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
559 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
560 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
561 WMI_SERVICE_STA_PWRSAVE, len);
562 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
563 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
564 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
565 WMI_SERVICE_AP_UAPSD, len);
566 SVCMAP(WMI_10_4_SERVICE_AP_DFS,
567 WMI_SERVICE_AP_DFS, len);
568 SVCMAP(WMI_10_4_SERVICE_11AC,
569 WMI_SERVICE_11AC, len);
570 SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
571 WMI_SERVICE_BLOCKACK, len);
572 SVCMAP(WMI_10_4_SERVICE_PHYERR,
573 WMI_SERVICE_PHYERR, len);
574 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
575 WMI_SERVICE_BCN_FILTER, len);
576 SVCMAP(WMI_10_4_SERVICE_RTT,
577 WMI_SERVICE_RTT, len);
578 SVCMAP(WMI_10_4_SERVICE_RATECTRL,
579 WMI_SERVICE_RATECTRL, len);
580 SVCMAP(WMI_10_4_SERVICE_WOW,
581 WMI_SERVICE_WOW, len);
582 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
583 WMI_SERVICE_RATECTRL_CACHE, len);
584 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
585 WMI_SERVICE_IRAM_TIDS, len);
586 SVCMAP(WMI_10_4_SERVICE_BURST,
587 WMI_SERVICE_BURST, len);
588 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
589 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
590 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
591 WMI_SERVICE_GTK_OFFLOAD, len);
592 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
593 WMI_SERVICE_SCAN_SCH, len);
594 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
595 WMI_SERVICE_CSA_OFFLOAD, len);
596 SVCMAP(WMI_10_4_SERVICE_CHATTER,
597 WMI_SERVICE_CHATTER, len);
598 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
599 WMI_SERVICE_COEX_FREQAVOID, len);
600 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
601 WMI_SERVICE_PACKET_POWER_SAVE, len);
602 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
603 WMI_SERVICE_FORCE_FW_HANG, len);
604 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
605 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
606 SVCMAP(WMI_10_4_SERVICE_GPIO,
607 WMI_SERVICE_GPIO, len);
608 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
609 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
610 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
611 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
612 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
613 WMI_SERVICE_STA_KEEP_ALIVE, len);
614 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
615 WMI_SERVICE_TX_ENCAP, len);
616 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
617 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
618 SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
619 WMI_SERVICE_EARLY_RX, len);
620 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
621 WMI_SERVICE_ENHANCED_PROXY_STA, len);
622 SVCMAP(WMI_10_4_SERVICE_TT,
623 WMI_SERVICE_TT, len);
624 SVCMAP(WMI_10_4_SERVICE_ATF,
625 WMI_SERVICE_ATF, len);
626 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
627 WMI_SERVICE_PEER_CACHING, len);
628 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
629 WMI_SERVICE_COEX_GPIO, len);
630 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
631 WMI_SERVICE_AUX_SPECTRAL_INTF, len);
632 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
633 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
634 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
635 WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
636 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
637 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
638 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
639 WMI_SERVICE_MESH_NON_11S, len);
640 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
641 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
642 SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
643 WMI_SERVICE_PEER_STATS, len);
644 SVCMAP(WMI_10_4_SERVICE_MESH_11S,
645 WMI_SERVICE_MESH_11S, len);
650 /* 2 word representation of MAC addr */
651 struct wmi_mac_addr {
663 u32 start_scan_cmdid;
665 u32 scan_chan_list_cmdid;
666 u32 scan_sch_prio_tbl_cmdid;
667 u32 pdev_set_regdomain_cmdid;
668 u32 pdev_set_channel_cmdid;
669 u32 pdev_set_param_cmdid;
670 u32 pdev_pktlog_enable_cmdid;
671 u32 pdev_pktlog_disable_cmdid;
672 u32 pdev_set_wmm_params_cmdid;
673 u32 pdev_set_ht_cap_ie_cmdid;
674 u32 pdev_set_vht_cap_ie_cmdid;
675 u32 pdev_set_dscp_tid_map_cmdid;
676 u32 pdev_set_quiet_mode_cmdid;
677 u32 pdev_green_ap_ps_enable_cmdid;
678 u32 pdev_get_tpc_config_cmdid;
679 u32 pdev_set_base_macaddr_cmdid;
680 u32 vdev_create_cmdid;
681 u32 vdev_delete_cmdid;
682 u32 vdev_start_request_cmdid;
683 u32 vdev_restart_request_cmdid;
687 u32 vdev_set_param_cmdid;
688 u32 vdev_install_key_cmdid;
689 u32 peer_create_cmdid;
690 u32 peer_delete_cmdid;
691 u32 peer_flush_tids_cmdid;
692 u32 peer_set_param_cmdid;
693 u32 peer_assoc_cmdid;
694 u32 peer_add_wds_entry_cmdid;
695 u32 peer_remove_wds_entry_cmdid;
696 u32 peer_mcast_group_cmdid;
698 u32 pdev_send_bcn_cmdid;
700 u32 bcn_filter_rx_cmdid;
701 u32 prb_req_filter_rx_cmdid;
704 u32 addba_clear_resp_cmdid;
705 u32 addba_send_cmdid;
706 u32 addba_status_cmdid;
707 u32 delba_send_cmdid;
708 u32 addba_set_resp_cmdid;
709 u32 send_singleamsdu_cmdid;
710 u32 sta_powersave_mode_cmdid;
711 u32 sta_powersave_param_cmdid;
712 u32 sta_mimo_ps_mode_cmdid;
713 u32 pdev_dfs_enable_cmdid;
714 u32 pdev_dfs_disable_cmdid;
716 u32 roam_scan_rssi_threshold;
717 u32 roam_scan_period;
718 u32 roam_scan_rssi_change_threshold;
720 u32 ofl_scan_add_ap_profile;
721 u32 ofl_scan_remove_ap_profile;
723 u32 p2p_dev_set_device_info;
724 u32 p2p_dev_set_discoverability;
725 u32 p2p_go_set_beacon_ie;
726 u32 p2p_go_set_probe_resp_ie;
727 u32 p2p_set_vendor_ie_data_cmdid;
728 u32 ap_ps_peer_param_cmdid;
729 u32 ap_ps_peer_uapsd_coex_cmdid;
730 u32 peer_rate_retry_sched_cmdid;
731 u32 wlan_profile_trigger_cmdid;
732 u32 wlan_profile_set_hist_intvl_cmdid;
733 u32 wlan_profile_get_profile_data_cmdid;
734 u32 wlan_profile_enable_profile_id_cmdid;
735 u32 wlan_profile_list_profile_id_cmdid;
736 u32 pdev_suspend_cmdid;
737 u32 pdev_resume_cmdid;
738 u32 add_bcn_filter_cmdid;
739 u32 rmv_bcn_filter_cmdid;
740 u32 wow_add_wake_pattern_cmdid;
741 u32 wow_del_wake_pattern_cmdid;
742 u32 wow_enable_disable_wake_event_cmdid;
743 u32 wow_enable_cmdid;
744 u32 wow_hostwakeup_from_sleep_cmdid;
745 u32 rtt_measreq_cmdid;
747 u32 vdev_spectral_scan_configure_cmdid;
748 u32 vdev_spectral_scan_enable_cmdid;
749 u32 request_stats_cmdid;
750 u32 set_arp_ns_offload_cmdid;
751 u32 network_list_offload_config_cmdid;
752 u32 gtk_offload_cmdid;
753 u32 csa_offload_enable_cmdid;
754 u32 csa_offload_chanswitch_cmdid;
755 u32 chatter_set_mode_cmdid;
756 u32 peer_tid_addba_cmdid;
757 u32 peer_tid_delba_cmdid;
758 u32 sta_dtim_ps_method_cmdid;
759 u32 sta_uapsd_auto_trig_cmdid;
760 u32 sta_keepalive_cmd;
763 u32 dbglog_cfg_cmdid;
765 u32 pdev_ftm_intg_cmdid;
766 u32 vdev_set_keepalive_cmdid;
767 u32 vdev_get_keepalive_cmdid;
768 u32 force_fw_hang_cmdid;
769 u32 gpio_config_cmdid;
770 u32 gpio_output_cmdid;
771 u32 pdev_get_temperature_cmdid;
772 u32 vdev_set_wmm_params_cmdid;
773 u32 tdls_set_state_cmdid;
774 u32 tdls_peer_update_cmdid;
775 u32 adaptive_qcs_cmdid;
776 u32 scan_update_request_cmdid;
777 u32 vdev_standby_response_cmdid;
778 u32 vdev_resume_response_cmdid;
779 u32 wlan_peer_caching_add_peer_cmdid;
780 u32 wlan_peer_caching_evict_peer_cmdid;
781 u32 wlan_peer_caching_restore_peer_cmdid;
782 u32 wlan_peer_caching_print_all_peers_info_cmdid;
783 u32 peer_update_wds_entry_cmdid;
784 u32 peer_add_proxy_sta_entry_cmdid;
785 u32 rtt_keepalive_cmdid;
788 u32 vdev_ratemask_cmdid;
789 u32 qboost_cfg_cmdid;
790 u32 pdev_smart_ant_enable_cmdid;
791 u32 pdev_smart_ant_set_rx_antenna_cmdid;
792 u32 peer_smart_ant_set_tx_antenna_cmdid;
793 u32 peer_smart_ant_set_train_info_cmdid;
794 u32 peer_smart_ant_set_node_config_ops_cmdid;
795 u32 pdev_set_antenna_switch_table_cmdid;
796 u32 pdev_set_ctl_table_cmdid;
797 u32 pdev_set_mimogain_table_cmdid;
798 u32 pdev_ratepwr_table_cmdid;
799 u32 pdev_ratepwr_chainmsk_table_cmdid;
801 u32 tt_set_conf_cmdid;
803 u32 vdev_atf_request_cmdid;
804 u32 peer_atf_request_cmdid;
805 u32 pdev_get_ani_cck_config_cmdid;
806 u32 pdev_get_ani_ofdm_config_cmdid;
807 u32 pdev_reserve_ast_entry_cmdid;
808 u32 pdev_get_nfcal_power_cmdid;
809 u32 pdev_get_tpc_cmdid;
810 u32 pdev_get_ast_info_cmdid;
811 u32 vdev_set_dscp_tid_map_cmdid;
812 u32 pdev_get_info_cmdid;
813 u32 vdev_get_info_cmdid;
814 u32 vdev_filter_neighbor_rx_packets_cmdid;
815 u32 mu_cal_start_cmdid;
816 u32 set_cca_params_cmdid;
817 u32 pdev_bss_chan_info_request_cmdid;
818 u32 pdev_enable_adaptive_cca_cmdid;
822 * wmi command groups.
825 /* 0 to 2 are reserved */
827 WMI_GRP_SCAN = WMI_GRP_START,
857 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
858 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
860 #define WMI_CMD_UNSUPPORTED 0
862 /* Command IDs and command events for MAIN FW. */
864 WMI_INIT_CMDID = 0x1,
866 /* Scan specific commands */
867 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
869 WMI_SCAN_CHAN_LIST_CMDID,
870 WMI_SCAN_SCH_PRIO_TBL_CMDID,
872 /* PDEV (physical device) specific commands */
873 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
874 WMI_PDEV_SET_CHANNEL_CMDID,
875 WMI_PDEV_SET_PARAM_CMDID,
876 WMI_PDEV_PKTLOG_ENABLE_CMDID,
877 WMI_PDEV_PKTLOG_DISABLE_CMDID,
878 WMI_PDEV_SET_WMM_PARAMS_CMDID,
879 WMI_PDEV_SET_HT_CAP_IE_CMDID,
880 WMI_PDEV_SET_VHT_CAP_IE_CMDID,
881 WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
882 WMI_PDEV_SET_QUIET_MODE_CMDID,
883 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
884 WMI_PDEV_GET_TPC_CONFIG_CMDID,
885 WMI_PDEV_SET_BASE_MACADDR_CMDID,
887 /* VDEV (virtual device) specific commands */
888 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
889 WMI_VDEV_DELETE_CMDID,
890 WMI_VDEV_START_REQUEST_CMDID,
891 WMI_VDEV_RESTART_REQUEST_CMDID,
895 WMI_VDEV_SET_PARAM_CMDID,
896 WMI_VDEV_INSTALL_KEY_CMDID,
898 /* peer specific commands */
899 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
900 WMI_PEER_DELETE_CMDID,
901 WMI_PEER_FLUSH_TIDS_CMDID,
902 WMI_PEER_SET_PARAM_CMDID,
903 WMI_PEER_ASSOC_CMDID,
904 WMI_PEER_ADD_WDS_ENTRY_CMDID,
905 WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
906 WMI_PEER_MCAST_GROUP_CMDID,
908 /* beacon/management specific commands */
909 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
910 WMI_PDEV_SEND_BCN_CMDID,
912 WMI_BCN_FILTER_RX_CMDID,
913 WMI_PRB_REQ_FILTER_RX_CMDID,
917 /* commands to directly control BA negotiation directly from host. */
918 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
919 WMI_ADDBA_SEND_CMDID,
920 WMI_ADDBA_STATUS_CMDID,
921 WMI_DELBA_SEND_CMDID,
922 WMI_ADDBA_SET_RESP_CMDID,
923 WMI_SEND_SINGLEAMSDU_CMDID,
925 /* Station power save specific config */
926 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
927 WMI_STA_POWERSAVE_PARAM_CMDID,
928 WMI_STA_MIMO_PS_MODE_CMDID,
930 /** DFS-specific commands */
931 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
932 WMI_PDEV_DFS_DISABLE_CMDID,
934 /* Roaming specific commands */
935 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
936 WMI_ROAM_SCAN_RSSI_THRESHOLD,
937 WMI_ROAM_SCAN_PERIOD,
938 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
941 /* offload scan specific commands */
942 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
943 WMI_OFL_SCAN_REMOVE_AP_PROFILE,
946 /* P2P specific commands */
947 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
948 WMI_P2P_DEV_SET_DISCOVERABILITY,
949 WMI_P2P_GO_SET_BEACON_IE,
950 WMI_P2P_GO_SET_PROBE_RESP_IE,
951 WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
953 /* AP power save specific config */
954 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
955 WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
957 /* Rate-control specific commands */
958 WMI_PEER_RATE_RETRY_SCHED_CMDID =
959 WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
961 /* WLAN Profiling commands. */
962 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
963 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
964 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
965 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
966 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
968 /* Suspend resume command Ids */
969 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
970 WMI_PDEV_RESUME_CMDID,
972 /* Beacon filter commands */
973 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
974 WMI_RMV_BCN_FILTER_CMDID,
976 /* WOW Specific WMI commands*/
977 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
978 WMI_WOW_DEL_WAKE_PATTERN_CMDID,
979 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
980 WMI_WOW_ENABLE_CMDID,
981 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
983 /* RTT measurement related cmd */
984 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
987 /* spectral scan commands */
988 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
989 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
992 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
994 /* ARP OFFLOAD REQUEST*/
995 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
997 /* NS offload confid*/
998 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
1000 /* GTK offload Specific WMI commands*/
1001 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1003 /* CSA offload Specific WMI commands*/
1004 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1005 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1007 /* Chatter commands*/
1008 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1010 /* addba specific commands */
1011 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1012 WMI_PEER_TID_DELBA_CMDID,
1014 /* set station mimo powersave method */
1015 WMI_STA_DTIM_PS_METHOD_CMDID,
1016 /* Configure the Station UAPSD AC Auto Trigger Parameters */
1017 WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1019 /* STA Keep alive parameter configuration,
1020 Requires WMI_SERVICE_STA_KEEP_ALIVE */
1021 WMI_STA_KEEPALIVE_CMD,
1023 /* misc command group */
1024 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1026 WMI_DBGLOG_CFG_CMDID,
1027 WMI_PDEV_QVIT_CMDID,
1028 WMI_PDEV_FTM_INTG_CMDID,
1029 WMI_VDEV_SET_KEEPALIVE_CMDID,
1030 WMI_VDEV_GET_KEEPALIVE_CMDID,
1031 WMI_FORCE_FW_HANG_CMDID,
1033 /* GPIO Configuration */
1034 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1035 WMI_GPIO_OUTPUT_CMDID,
1039 WMI_SERVICE_READY_EVENTID = 0x1,
1042 /* Scan specific events */
1043 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1045 /* PDEV specific events */
1046 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1047 WMI_CHAN_INFO_EVENTID,
1050 /* VDEV specific events */
1051 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1052 WMI_VDEV_STOPPED_EVENTID,
1053 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1055 /* peer specific events */
1056 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1058 /* beacon/mgmt specific events */
1059 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1060 WMI_HOST_SWBA_EVENTID,
1061 WMI_TBTTOFFSET_UPDATE_EVENTID,
1063 /* ADDBA Related WMI Events*/
1064 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1065 WMI_TX_ADDBA_COMPLETE_EVENTID,
1067 /* Roam event to trigger roaming on host */
1068 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1072 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1075 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1076 WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1077 WMI_RTT_ERROR_REPORT_EVENTID,
1080 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1081 WMI_GTK_REKEY_FAIL_EVENTID,
1083 /* CSA IE received event */
1084 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1087 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1088 WMI_PDEV_UTF_EVENTID,
1089 WMI_DEBUG_MESG_EVENTID,
1090 WMI_UPDATE_STATS_EVENTID,
1091 WMI_DEBUG_PRINT_EVENTID,
1092 WMI_DCS_INTERFERENCE_EVENTID,
1093 WMI_PDEV_QVIT_EVENTID,
1094 WMI_WLAN_PROFILE_DATA_EVENTID,
1095 WMI_PDEV_FTM_INTG_EVENTID,
1096 WMI_WLAN_FREQ_AVOID_EVENTID,
1097 WMI_VDEV_GET_KEEPALIVE_EVENTID,
1100 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1103 /* Command IDs and command events for 10.X firmware */
1104 enum wmi_10x_cmd_id {
1105 WMI_10X_START_CMDID = 0x9000,
1106 WMI_10X_END_CMDID = 0x9FFF,
1108 /* initialize the wlan sub system */
1111 /* Scan specific commands */
1113 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1114 WMI_10X_STOP_SCAN_CMDID,
1115 WMI_10X_SCAN_CHAN_LIST_CMDID,
1118 /* PDEV(physical device) specific commands */
1119 WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1120 WMI_10X_PDEV_SET_CHANNEL_CMDID,
1121 WMI_10X_PDEV_SET_PARAM_CMDID,
1122 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1123 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1124 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1125 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1126 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1127 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1128 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1129 WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1130 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1131 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1133 /* VDEV(virtual device) specific commands */
1134 WMI_10X_VDEV_CREATE_CMDID,
1135 WMI_10X_VDEV_DELETE_CMDID,
1136 WMI_10X_VDEV_START_REQUEST_CMDID,
1137 WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1138 WMI_10X_VDEV_UP_CMDID,
1139 WMI_10X_VDEV_STOP_CMDID,
1140 WMI_10X_VDEV_DOWN_CMDID,
1141 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1142 WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1143 WMI_10X_VDEV_SET_PARAM_CMDID,
1144 WMI_10X_VDEV_INSTALL_KEY_CMDID,
1146 /* peer specific commands */
1147 WMI_10X_PEER_CREATE_CMDID,
1148 WMI_10X_PEER_DELETE_CMDID,
1149 WMI_10X_PEER_FLUSH_TIDS_CMDID,
1150 WMI_10X_PEER_SET_PARAM_CMDID,
1151 WMI_10X_PEER_ASSOC_CMDID,
1152 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1153 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1154 WMI_10X_PEER_MCAST_GROUP_CMDID,
1156 /* beacon/management specific commands */
1158 WMI_10X_BCN_TX_CMDID,
1159 WMI_10X_BCN_PRB_TMPL_CMDID,
1160 WMI_10X_BCN_FILTER_RX_CMDID,
1161 WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1162 WMI_10X_MGMT_TX_CMDID,
1164 /* commands to directly control ba negotiation directly from host. */
1165 WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1166 WMI_10X_ADDBA_SEND_CMDID,
1167 WMI_10X_ADDBA_STATUS_CMDID,
1168 WMI_10X_DELBA_SEND_CMDID,
1169 WMI_10X_ADDBA_SET_RESP_CMDID,
1170 WMI_10X_SEND_SINGLEAMSDU_CMDID,
1172 /* Station power save specific config */
1173 WMI_10X_STA_POWERSAVE_MODE_CMDID,
1174 WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1175 WMI_10X_STA_MIMO_PS_MODE_CMDID,
1177 /* set debug log config */
1178 WMI_10X_DBGLOG_CFG_CMDID,
1180 /* DFS-specific commands */
1181 WMI_10X_PDEV_DFS_ENABLE_CMDID,
1182 WMI_10X_PDEV_DFS_DISABLE_CMDID,
1184 /* QVIT specific command id */
1185 WMI_10X_PDEV_QVIT_CMDID,
1187 /* Offload Scan and Roaming related commands */
1188 WMI_10X_ROAM_SCAN_MODE,
1189 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1190 WMI_10X_ROAM_SCAN_PERIOD,
1191 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1192 WMI_10X_ROAM_AP_PROFILE,
1193 WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1194 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1195 WMI_10X_OFL_SCAN_PERIOD,
1197 /* P2P specific commands */
1198 WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1199 WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1200 WMI_10X_P2P_GO_SET_BEACON_IE,
1201 WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1203 /* AP power save specific config */
1204 WMI_10X_AP_PS_PEER_PARAM_CMDID,
1205 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1207 /* Rate-control specific commands */
1208 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1210 /* WLAN Profiling commands. */
1211 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1212 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1213 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1214 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1215 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1217 /* Suspend resume command Ids */
1218 WMI_10X_PDEV_SUSPEND_CMDID,
1219 WMI_10X_PDEV_RESUME_CMDID,
1221 /* Beacon filter commands */
1222 WMI_10X_ADD_BCN_FILTER_CMDID,
1223 WMI_10X_RMV_BCN_FILTER_CMDID,
1225 /* WOW Specific WMI commands*/
1226 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1227 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1228 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1229 WMI_10X_WOW_ENABLE_CMDID,
1230 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1232 /* RTT measurement related cmd */
1233 WMI_10X_RTT_MEASREQ_CMDID,
1234 WMI_10X_RTT_TSF_CMDID,
1236 /* transmit beacon by value */
1237 WMI_10X_PDEV_SEND_BCN_CMDID,
1240 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1241 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1242 WMI_10X_REQUEST_STATS_CMDID,
1244 /* GPIO Configuration */
1245 WMI_10X_GPIO_CONFIG_CMDID,
1246 WMI_10X_GPIO_OUTPUT_CMDID,
1248 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1251 enum wmi_10x_event_id {
1252 WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1253 WMI_10X_READY_EVENTID,
1254 WMI_10X_START_EVENTID = 0x9000,
1255 WMI_10X_END_EVENTID = 0x9FFF,
1257 /* Scan specific events */
1258 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1259 WMI_10X_ECHO_EVENTID,
1260 WMI_10X_DEBUG_MESG_EVENTID,
1261 WMI_10X_UPDATE_STATS_EVENTID,
1263 /* Instantaneous RSSI event */
1264 WMI_10X_INST_RSSI_STATS_EVENTID,
1266 /* VDEV specific events */
1267 WMI_10X_VDEV_START_RESP_EVENTID,
1268 WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1269 WMI_10X_VDEV_RESUME_REQ_EVENTID,
1270 WMI_10X_VDEV_STOPPED_EVENTID,
1272 /* peer specific events */
1273 WMI_10X_PEER_STA_KICKOUT_EVENTID,
1275 /* beacon/mgmt specific events */
1276 WMI_10X_HOST_SWBA_EVENTID,
1277 WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1278 WMI_10X_MGMT_RX_EVENTID,
1280 /* Channel stats event */
1281 WMI_10X_CHAN_INFO_EVENTID,
1283 /* PHY Error specific WMI event */
1284 WMI_10X_PHYERR_EVENTID,
1286 /* Roam event to trigger roaming on host */
1287 WMI_10X_ROAM_EVENTID,
1289 /* matching AP found from list of profiles */
1290 WMI_10X_PROFILE_MATCH,
1292 /* debug print message used for tracing FW code while debugging */
1293 WMI_10X_DEBUG_PRINT_EVENTID,
1294 /* VI spoecific event */
1295 WMI_10X_PDEV_QVIT_EVENTID,
1296 /* FW code profile data in response to profile request */
1297 WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1299 /*RTT related event ID*/
1300 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1301 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1302 WMI_10X_RTT_ERROR_REPORT_EVENTID,
1304 WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1305 WMI_10X_DCS_INTERFERENCE_EVENTID,
1307 /* TPC config for the current operating channel */
1308 WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1310 WMI_10X_GPIO_INPUT_EVENTID,
1311 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID-1,
1314 enum wmi_10_2_cmd_id {
1315 WMI_10_2_START_CMDID = 0x9000,
1316 WMI_10_2_END_CMDID = 0x9FFF,
1317 WMI_10_2_INIT_CMDID,
1318 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1319 WMI_10_2_STOP_SCAN_CMDID,
1320 WMI_10_2_SCAN_CHAN_LIST_CMDID,
1321 WMI_10_2_ECHO_CMDID,
1322 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1323 WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1324 WMI_10_2_PDEV_SET_PARAM_CMDID,
1325 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1326 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1327 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1328 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1329 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1330 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1331 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1332 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1333 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1334 WMI_10_2_VDEV_CREATE_CMDID,
1335 WMI_10_2_VDEV_DELETE_CMDID,
1336 WMI_10_2_VDEV_START_REQUEST_CMDID,
1337 WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1338 WMI_10_2_VDEV_UP_CMDID,
1339 WMI_10_2_VDEV_STOP_CMDID,
1340 WMI_10_2_VDEV_DOWN_CMDID,
1341 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1342 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1343 WMI_10_2_VDEV_SET_PARAM_CMDID,
1344 WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1345 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1346 WMI_10_2_PEER_CREATE_CMDID,
1347 WMI_10_2_PEER_DELETE_CMDID,
1348 WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1349 WMI_10_2_PEER_SET_PARAM_CMDID,
1350 WMI_10_2_PEER_ASSOC_CMDID,
1351 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1352 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1353 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1354 WMI_10_2_PEER_MCAST_GROUP_CMDID,
1355 WMI_10_2_BCN_TX_CMDID,
1356 WMI_10_2_BCN_PRB_TMPL_CMDID,
1357 WMI_10_2_BCN_FILTER_RX_CMDID,
1358 WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1359 WMI_10_2_MGMT_TX_CMDID,
1360 WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1361 WMI_10_2_ADDBA_SEND_CMDID,
1362 WMI_10_2_ADDBA_STATUS_CMDID,
1363 WMI_10_2_DELBA_SEND_CMDID,
1364 WMI_10_2_ADDBA_SET_RESP_CMDID,
1365 WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1366 WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1367 WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1368 WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1369 WMI_10_2_DBGLOG_CFG_CMDID,
1370 WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1371 WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1372 WMI_10_2_PDEV_QVIT_CMDID,
1373 WMI_10_2_ROAM_SCAN_MODE,
1374 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1375 WMI_10_2_ROAM_SCAN_PERIOD,
1376 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1377 WMI_10_2_ROAM_AP_PROFILE,
1378 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1379 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1380 WMI_10_2_OFL_SCAN_PERIOD,
1381 WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1382 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1383 WMI_10_2_P2P_GO_SET_BEACON_IE,
1384 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1385 WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1386 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1387 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1388 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1389 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1390 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1391 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1392 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1393 WMI_10_2_PDEV_SUSPEND_CMDID,
1394 WMI_10_2_PDEV_RESUME_CMDID,
1395 WMI_10_2_ADD_BCN_FILTER_CMDID,
1396 WMI_10_2_RMV_BCN_FILTER_CMDID,
1397 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1398 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1399 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1400 WMI_10_2_WOW_ENABLE_CMDID,
1401 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1402 WMI_10_2_RTT_MEASREQ_CMDID,
1403 WMI_10_2_RTT_TSF_CMDID,
1404 WMI_10_2_RTT_KEEPALIVE_CMDID,
1405 WMI_10_2_PDEV_SEND_BCN_CMDID,
1406 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1407 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1408 WMI_10_2_REQUEST_STATS_CMDID,
1409 WMI_10_2_GPIO_CONFIG_CMDID,
1410 WMI_10_2_GPIO_OUTPUT_CMDID,
1411 WMI_10_2_VDEV_RATEMASK_CMDID,
1412 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1413 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1414 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1415 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1416 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1417 WMI_10_2_FORCE_FW_HANG_CMDID,
1418 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1419 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1420 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1421 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1422 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1423 WMI_10_2_PDEV_GET_INFO,
1424 WMI_10_2_VDEV_GET_INFO,
1425 WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1426 WMI_10_2_PEER_ATF_REQUEST_CMDID,
1427 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1428 WMI_10_2_MU_CAL_START_CMDID,
1429 WMI_10_2_SET_LTEU_CONFIG_CMDID,
1430 WMI_10_2_SET_CCA_PARAMS,
1431 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1434 enum wmi_10_2_event_id {
1435 WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1436 WMI_10_2_READY_EVENTID,
1437 WMI_10_2_DEBUG_MESG_EVENTID,
1438 WMI_10_2_START_EVENTID = 0x9000,
1439 WMI_10_2_END_EVENTID = 0x9FFF,
1440 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1441 WMI_10_2_ECHO_EVENTID,
1442 WMI_10_2_UPDATE_STATS_EVENTID,
1443 WMI_10_2_INST_RSSI_STATS_EVENTID,
1444 WMI_10_2_VDEV_START_RESP_EVENTID,
1445 WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1446 WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1447 WMI_10_2_VDEV_STOPPED_EVENTID,
1448 WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1449 WMI_10_2_HOST_SWBA_EVENTID,
1450 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1451 WMI_10_2_MGMT_RX_EVENTID,
1452 WMI_10_2_CHAN_INFO_EVENTID,
1453 WMI_10_2_PHYERR_EVENTID,
1454 WMI_10_2_ROAM_EVENTID,
1455 WMI_10_2_PROFILE_MATCH,
1456 WMI_10_2_DEBUG_PRINT_EVENTID,
1457 WMI_10_2_PDEV_QVIT_EVENTID,
1458 WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1459 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1460 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1461 WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1462 WMI_10_2_RTT_KEEPALIVE_EVENTID,
1463 WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1464 WMI_10_2_DCS_INTERFERENCE_EVENTID,
1465 WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1466 WMI_10_2_GPIO_INPUT_EVENTID,
1467 WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1468 WMI_10_2_GENERIC_BUFFER_EVENTID,
1469 WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1470 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1471 WMI_10_2_WDS_PEER_EVENTID,
1472 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1473 WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1474 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1477 enum wmi_10_4_cmd_id {
1478 WMI_10_4_START_CMDID = 0x9000,
1479 WMI_10_4_END_CMDID = 0x9FFF,
1480 WMI_10_4_INIT_CMDID,
1481 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1482 WMI_10_4_STOP_SCAN_CMDID,
1483 WMI_10_4_SCAN_CHAN_LIST_CMDID,
1484 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1485 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1486 WMI_10_4_ECHO_CMDID,
1487 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1488 WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1489 WMI_10_4_PDEV_SET_PARAM_CMDID,
1490 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1491 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1492 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1493 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1494 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1495 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1496 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1497 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1498 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1499 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1500 WMI_10_4_VDEV_CREATE_CMDID,
1501 WMI_10_4_VDEV_DELETE_CMDID,
1502 WMI_10_4_VDEV_START_REQUEST_CMDID,
1503 WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1504 WMI_10_4_VDEV_UP_CMDID,
1505 WMI_10_4_VDEV_STOP_CMDID,
1506 WMI_10_4_VDEV_DOWN_CMDID,
1507 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1508 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1509 WMI_10_4_VDEV_SET_PARAM_CMDID,
1510 WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1511 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1512 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1513 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1514 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1515 WMI_10_4_PEER_CREATE_CMDID,
1516 WMI_10_4_PEER_DELETE_CMDID,
1517 WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1518 WMI_10_4_PEER_SET_PARAM_CMDID,
1519 WMI_10_4_PEER_ASSOC_CMDID,
1520 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1521 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1522 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1523 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1524 WMI_10_4_PEER_MCAST_GROUP_CMDID,
1525 WMI_10_4_BCN_TX_CMDID,
1526 WMI_10_4_PDEV_SEND_BCN_CMDID,
1527 WMI_10_4_BCN_PRB_TMPL_CMDID,
1528 WMI_10_4_BCN_FILTER_RX_CMDID,
1529 WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1530 WMI_10_4_MGMT_TX_CMDID,
1531 WMI_10_4_PRB_TMPL_CMDID,
1532 WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1533 WMI_10_4_ADDBA_SEND_CMDID,
1534 WMI_10_4_ADDBA_STATUS_CMDID,
1535 WMI_10_4_DELBA_SEND_CMDID,
1536 WMI_10_4_ADDBA_SET_RESP_CMDID,
1537 WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1538 WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1539 WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1540 WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1541 WMI_10_4_DBGLOG_CFG_CMDID,
1542 WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1543 WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1544 WMI_10_4_PDEV_QVIT_CMDID,
1545 WMI_10_4_ROAM_SCAN_MODE,
1546 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1547 WMI_10_4_ROAM_SCAN_PERIOD,
1548 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1549 WMI_10_4_ROAM_AP_PROFILE,
1550 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1551 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1552 WMI_10_4_OFL_SCAN_PERIOD,
1553 WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1554 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1555 WMI_10_4_P2P_GO_SET_BEACON_IE,
1556 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1557 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1558 WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1559 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1560 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1561 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1562 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1563 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1564 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1565 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1566 WMI_10_4_PDEV_SUSPEND_CMDID,
1567 WMI_10_4_PDEV_RESUME_CMDID,
1568 WMI_10_4_ADD_BCN_FILTER_CMDID,
1569 WMI_10_4_RMV_BCN_FILTER_CMDID,
1570 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1571 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1572 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1573 WMI_10_4_WOW_ENABLE_CMDID,
1574 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1575 WMI_10_4_RTT_MEASREQ_CMDID,
1576 WMI_10_4_RTT_TSF_CMDID,
1577 WMI_10_4_RTT_KEEPALIVE_CMDID,
1578 WMI_10_4_OEM_REQ_CMDID,
1580 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1581 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1582 WMI_10_4_REQUEST_STATS_CMDID,
1583 WMI_10_4_GPIO_CONFIG_CMDID,
1584 WMI_10_4_GPIO_OUTPUT_CMDID,
1585 WMI_10_4_VDEV_RATEMASK_CMDID,
1586 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1587 WMI_10_4_GTK_OFFLOAD_CMDID,
1588 WMI_10_4_QBOOST_CFG_CMDID,
1589 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1590 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1591 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1592 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1593 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1594 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1595 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1596 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1597 WMI_10_4_FORCE_FW_HANG_CMDID,
1598 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1599 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1600 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1601 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1602 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1603 WMI_10_4_PDEV_FIPS_CMDID,
1604 WMI_10_4_TT_SET_CONF_CMDID,
1605 WMI_10_4_FWTEST_CMDID,
1606 WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1607 WMI_10_4_PEER_ATF_REQUEST_CMDID,
1608 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1609 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1610 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1611 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1612 WMI_10_4_PDEV_GET_TPC_CMDID,
1613 WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1614 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1615 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1616 WMI_10_4_PDEV_GET_INFO_CMDID,
1617 WMI_10_4_VDEV_GET_INFO_CMDID,
1618 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1619 WMI_10_4_MU_CAL_START_CMDID,
1620 WMI_10_4_SET_CCA_PARAMS_CMDID,
1621 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1622 WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1623 WMI_10_4_VDEV_SET_IE_CMDID,
1624 WMI_10_4_SET_LTEU_CONFIG_CMDID,
1625 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1628 enum wmi_10_4_event_id {
1629 WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1630 WMI_10_4_READY_EVENTID,
1631 WMI_10_4_DEBUG_MESG_EVENTID,
1632 WMI_10_4_START_EVENTID = 0x9000,
1633 WMI_10_4_END_EVENTID = 0x9FFF,
1634 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1635 WMI_10_4_ECHO_EVENTID,
1636 WMI_10_4_UPDATE_STATS_EVENTID,
1637 WMI_10_4_INST_RSSI_STATS_EVENTID,
1638 WMI_10_4_VDEV_START_RESP_EVENTID,
1639 WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1640 WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1641 WMI_10_4_VDEV_STOPPED_EVENTID,
1642 WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1643 WMI_10_4_HOST_SWBA_EVENTID,
1644 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1645 WMI_10_4_MGMT_RX_EVENTID,
1646 WMI_10_4_CHAN_INFO_EVENTID,
1647 WMI_10_4_PHYERR_EVENTID,
1648 WMI_10_4_ROAM_EVENTID,
1649 WMI_10_4_PROFILE_MATCH,
1650 WMI_10_4_DEBUG_PRINT_EVENTID,
1651 WMI_10_4_PDEV_QVIT_EVENTID,
1652 WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1653 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1654 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1655 WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1656 WMI_10_4_RTT_KEEPALIVE_EVENTID,
1657 WMI_10_4_OEM_CAPABILITY_EVENTID,
1658 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1659 WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1660 WMI_10_4_NAN_EVENTID,
1661 WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1662 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1663 WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1664 WMI_10_4_DCS_INTERFERENCE_EVENTID,
1665 WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1666 WMI_10_4_CSA_HANDLING_EVENTID,
1667 WMI_10_4_GPIO_INPUT_EVENTID,
1668 WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1669 WMI_10_4_GENERIC_BUFFER_EVENTID,
1670 WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1671 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1672 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1673 WMI_10_4_WDS_PEER_EVENTID,
1674 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1675 WMI_10_4_PDEV_FIPS_EVENTID,
1676 WMI_10_4_TT_STATS_EVENTID,
1677 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1678 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1679 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1680 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1681 WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1682 WMI_10_4_PDEV_TPC_EVENTID,
1683 WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1684 WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1685 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1686 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1687 WMI_10_4_MU_REPORT_EVENTID,
1688 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1692 MODE_11A = 0, /* 11a Mode */
1693 MODE_11G = 1, /* 11b/g Mode */
1694 MODE_11B = 2, /* 11b Mode */
1695 MODE_11GONLY = 3, /* 11g only Mode */
1696 MODE_11NA_HT20 = 4, /* 11a HT20 mode */
1697 MODE_11NG_HT20 = 5, /* 11g HT20 mode */
1698 MODE_11NA_HT40 = 6, /* 11a HT40 mode */
1699 MODE_11NG_HT40 = 7, /* 11g HT40 mode */
1700 MODE_11AC_VHT20 = 8,
1701 MODE_11AC_VHT40 = 9,
1702 MODE_11AC_VHT80 = 10,
1703 /* MODE_11AC_VHT160 = 11, */
1704 MODE_11AC_VHT20_2G = 11,
1705 MODE_11AC_VHT40_2G = 12,
1706 MODE_11AC_VHT80_2G = 13,
1711 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1722 case MODE_11NA_HT20:
1724 case MODE_11NG_HT20:
1726 case MODE_11NA_HT40:
1728 case MODE_11NG_HT40:
1730 case MODE_11AC_VHT20:
1731 return "11ac-vht20";
1732 case MODE_11AC_VHT40:
1733 return "11ac-vht40";
1734 case MODE_11AC_VHT80:
1735 return "11ac-vht80";
1736 case MODE_11AC_VHT20_2G:
1737 return "11ac-vht20-2g";
1738 case MODE_11AC_VHT40_2G:
1739 return "11ac-vht40-2g";
1740 case MODE_11AC_VHT80_2G:
1741 return "11ac-vht80-2g";
1746 /* no default handler to allow compiler to check that the
1747 * enum is fully handled */
1753 #define WMI_CHAN_LIST_TAG 0x1
1754 #define WMI_SSID_LIST_TAG 0x2
1755 #define WMI_BSSID_LIST_TAG 0x3
1756 #define WMI_IE_TAG 0x4
1758 struct wmi_channel {
1760 __le32 band_center_freq1;
1761 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
1763 __le32 flags; /* WMI_CHAN_FLAG_ */
1765 u8 mode; /* only 6 LSBs */
1771 /* note: power unit is 0.5 dBm */
1786 struct wmi_channel_arg {
1788 u32 band_center_freq1;
1795 /* note: power unit is 0.5 dBm */
1799 u32 max_antenna_gain;
1801 enum wmi_phy_mode mode;
1804 enum wmi_channel_change_cause {
1805 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
1806 WMI_CHANNEL_CHANGE_CAUSE_CSA,
1809 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6)
1810 #define WMI_CHAN_FLAG_PASSIVE (1 << 7)
1811 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8)
1812 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9)
1813 #define WMI_CHAN_FLAG_DFS (1 << 10)
1814 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11)
1815 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12)
1817 /* Indicate reason for channel switch */
1818 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
1820 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */
1822 /* HT Capabilities*/
1823 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */
1824 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */
1825 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */
1826 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */
1827 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3
1828 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */
1829 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4
1830 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */
1831 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */
1832 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */
1833 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
1834 #define WMI_HT_CAP_HT40_SGI 0x0800
1836 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \
1837 WMI_HT_CAP_HT20_SGI | \
1838 WMI_HT_CAP_HT40_SGI | \
1839 WMI_HT_CAP_TX_STBC | \
1840 WMI_HT_CAP_RX_STBC | \
1844 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
1845 * field. The fields not defined here are not supported, or reserved.
1846 * Do not change these masks and if you have to add new one follow the
1847 * bitmask as specified by 802.11ac draft.
1850 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003
1851 #define WMI_VHT_CAP_RX_LDPC 0x00000010
1852 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020
1853 #define WMI_VHT_CAP_TX_STBC 0x00000080
1854 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300
1855 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8
1856 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000
1857 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23
1858 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000
1859 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000
1861 /* The following also refer for max HT AMSDU */
1862 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000
1863 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001
1864 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002
1866 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \
1867 WMI_VHT_CAP_RX_LDPC | \
1868 WMI_VHT_CAP_SGI_80MHZ | \
1869 WMI_VHT_CAP_TX_STBC | \
1870 WMI_VHT_CAP_RX_STBC_MASK | \
1871 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \
1872 WMI_VHT_CAP_RX_FIXED_ANT | \
1873 WMI_VHT_CAP_TX_FIXED_ANT)
1876 * Interested readers refer to Rx/Tx MCS Map definition as defined in
1879 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1))
1880 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000
1881 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16
1884 REGDMN_MODE_11A = 0x00001, /* 11a channels */
1885 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */
1886 REGDMN_MODE_11B = 0x00004, /* 11b channels */
1887 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */
1888 REGDMN_MODE_11G = 0x00008, /* XXX historical */
1889 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */
1890 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */
1891 REGDMN_MODE_XR = 0x00100, /* XR channels */
1892 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */
1893 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
1894 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */
1895 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */
1896 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */
1897 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */
1898 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */
1899 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */
1900 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */
1901 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */
1902 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */
1903 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */
1904 REGDMN_MODE_ALL = 0xffffffff
1907 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001
1908 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002
1909 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004
1911 /* regulatory capabilities */
1912 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040
1913 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080
1914 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100
1915 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200
1916 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400
1917 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800
1919 struct hal_reg_capabilities {
1920 /* regdomain value specified in EEPROM */
1923 __le32 eeprom_rd_ext;
1924 /* CAP1 capabilities bit map. */
1926 /* REGDMN EEPROM CAP. */
1929 __le32 wireless_modes;
1930 __le32 low_2ghz_chan;
1931 __le32 high_2ghz_chan;
1932 __le32 low_5ghz_chan;
1933 __le32 high_5ghz_chan;
1936 enum wlan_mode_capability {
1937 WHAL_WLAN_11A_CAPABILITY = 0x1,
1938 WHAL_WLAN_11G_CAPABILITY = 0x2,
1939 WHAL_WLAN_11AG_CAPABILITY = 0x3,
1942 /* structure used by FW for requesting host memory */
1943 struct wlan_host_mem_req {
1944 /* ID of the request */
1946 /* size of the of each unit */
1948 /* flags to indicate that
1949 * the number units is dependent
1950 * on number of resources(num vdevs num peers .. etc)
1952 __le32 num_unit_info;
1954 * actual number of units to allocate . if flags in the num_unit_info
1955 * indicate that number of units is tied to number of a particular
1956 * resource to allocate then num_units filed is set to 0 and host
1957 * will derive the number units from number of the resources it is
1964 * The following struct holds optional payload for
1965 * wmi_service_ready_event,e.g., 11ac pass some of the
1966 * device capability to the host.
1968 struct wmi_service_ready_event {
1970 __le32 sw_version_1;
1972 /* WMI_PHY_CAPABILITY */
1973 __le32 phy_capability;
1974 /* Maximum number of frag table entries that SW will populate less 1 */
1975 __le32 max_frag_entry;
1976 __le32 wmi_service_bitmap[16];
1977 __le32 num_rf_chains;
1979 * The following field is only valid for service type
1982 __le32 ht_cap_info; /* WMI HT Capability */
1983 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
1984 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
1985 __le32 hw_min_tx_power;
1986 __le32 hw_max_tx_power;
1987 struct hal_reg_capabilities hal_reg_capabilities;
1988 __le32 sys_cap_info;
1989 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
1991 * Max beacon and Probe Response IE offload size
1992 * (includes optional P2P IEs)
1994 __le32 max_bcn_ie_size;
1996 * request to host to allocate a chuck of memory and pss it down to FW
1997 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
1998 * data structures. Only valid for low latency interfaces like PCIE
1999 * where FW can access this memory directly (or) by DMA.
2001 __le32 num_mem_reqs;
2002 struct wlan_host_mem_req mem_reqs[0];
2005 /* This is the definition from 10.X firmware branch */
2006 struct wmi_10x_service_ready_event {
2010 /* WMI_PHY_CAPABILITY */
2011 __le32 phy_capability;
2013 /* Maximum number of frag table entries that SW will populate less 1 */
2014 __le32 max_frag_entry;
2015 __le32 wmi_service_bitmap[16];
2016 __le32 num_rf_chains;
2019 * The following field is only valid for service type
2022 __le32 ht_cap_info; /* WMI HT Capability */
2023 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2024 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2025 __le32 hw_min_tx_power;
2026 __le32 hw_max_tx_power;
2028 struct hal_reg_capabilities hal_reg_capabilities;
2030 __le32 sys_cap_info;
2031 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2034 * request to host to allocate a chuck of memory and pss it down to FW
2035 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2036 * data structures. Only valid for low latency interfaces like PCIE
2037 * where FW can access this memory directly (or) by DMA.
2039 __le32 num_mem_reqs;
2041 struct wlan_host_mem_req mem_reqs[0];
2044 #define WMI_SERVICE_READY_TIMEOUT_HZ (5*HZ)
2045 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5*HZ)
2047 struct wmi_ready_event {
2050 struct wmi_mac_addr mac_addr;
2054 struct wmi_resource_config {
2055 /* number of virtual devices (VAPs) to support */
2058 /* number of peer nodes to support */
2062 * In offload mode target supports features like WOW, chatter and
2063 * other protocol offloads. In order to support them some
2064 * functionalities like reorder buffering, PN checking need to be
2065 * done in target. This determines maximum number of peers suported
2066 * by target in offload mode
2068 __le32 num_offload_peers;
2070 /* For target-based RX reordering */
2071 __le32 num_offload_reorder_bufs;
2073 /* number of keys per peer */
2074 __le32 num_peer_keys;
2076 /* total number of TX/RX data TIDs */
2080 * max skid for resolving hash collisions
2082 * The address search table is sparse, so that if two MAC addresses
2083 * result in the same hash value, the second of these conflicting
2084 * entries can slide to the next index in the address search table,
2085 * and use it, if it is unoccupied. This ast_skid_limit parameter
2086 * specifies the upper bound on how many subsequent indices to search
2087 * over to find an unoccupied space.
2089 __le32 ast_skid_limit;
2092 * the nominal chain mask for transmit
2094 * The chain mask may be modified dynamically, e.g. to operate AP
2095 * tx with a reduced number of chains if no clients are associated.
2096 * This configuration parameter specifies the nominal chain-mask that
2097 * should be used when not operating with a reduced set of tx chains.
2099 __le32 tx_chain_mask;
2102 * the nominal chain mask for receive
2104 * The chain mask may be modified dynamically, e.g. for a client
2105 * to use a reduced number of chains for receive if the traffic to
2106 * the client is low enough that it doesn't require downlink MIMO
2107 * or antenna diversity.
2108 * This configuration parameter specifies the nominal chain-mask that
2109 * should be used when not operating with a reduced set of rx chains.
2111 __le32 rx_chain_mask;
2114 * what rx reorder timeout (ms) to use for the AC
2116 * Each WMM access class (voice, video, best-effort, background) will
2117 * have its own timeout value to dictate how long to wait for missing
2118 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2119 * already been received.
2120 * This parameter specifies the timeout in milliseconds for each
2123 __le32 rx_timeout_pri_vi;
2124 __le32 rx_timeout_pri_vo;
2125 __le32 rx_timeout_pri_be;
2126 __le32 rx_timeout_pri_bk;
2129 * what mode the rx should decap packets to
2131 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2132 * THis setting also determines the default TX behavior, however TX
2133 * behavior can be modified on a per VAP basis during VAP init
2135 __le32 rx_decap_mode;
2137 /* what is the maximum number of scan requests that can be queued */
2138 __le32 scan_max_pending_reqs;
2140 /* maximum VDEV that could use BMISS offload */
2141 __le32 bmiss_offload_max_vdev;
2143 /* maximum VDEV that could use offload roaming */
2144 __le32 roam_offload_max_vdev;
2146 /* maximum AP profiles that would push to offload roaming */
2147 __le32 roam_offload_max_ap_profiles;
2150 * how many groups to use for mcast->ucast conversion
2152 * The target's WAL maintains a table to hold information regarding
2153 * which peers belong to a given multicast group, so that if
2154 * multicast->unicast conversion is enabled, the target can convert
2155 * multicast tx frames to a series of unicast tx frames, to each
2156 * peer within the multicast group.
2157 This num_mcast_groups configuration parameter tells the target how
2158 * many multicast groups to provide storage for within its multicast
2159 * group membership table.
2161 __le32 num_mcast_groups;
2164 * size to alloc for the mcast membership table
2166 * This num_mcast_table_elems configuration parameter tells the
2167 * target how many peer elements it needs to provide storage for in
2168 * its multicast group membership table.
2169 * These multicast group membership table elements are shared by the
2170 * multicast groups stored within the table.
2172 __le32 num_mcast_table_elems;
2175 * whether/how to do multicast->unicast conversion
2177 * This configuration parameter specifies whether the target should
2178 * perform multicast --> unicast conversion on transmit, and if so,
2179 * what to do if it finds no entries in its multicast group
2180 * membership table for the multicast IP address in the tx frame.
2181 * Configuration value:
2182 * 0 -> Do not perform multicast to unicast conversion.
2183 * 1 -> Convert multicast frames to unicast, if the IP multicast
2184 * address from the tx frame is found in the multicast group
2185 * membership table. If the IP multicast address is not found,
2187 * 2 -> Convert multicast frames to unicast, if the IP multicast
2188 * address from the tx frame is found in the multicast group
2189 * membership table. If the IP multicast address is not found,
2190 * transmit the frame as multicast.
2192 __le32 mcast2ucast_mode;
2195 * how much memory to allocate for a tx PPDU dbg log
2197 * This parameter controls how much memory the target will allocate
2198 * to store a log of tx PPDU meta-information (how large the PPDU
2199 * was, when it was sent, whether it was successful, etc.)
2201 __le32 tx_dbg_log_size;
2203 /* how many AST entries to be allocated for WDS */
2204 __le32 num_wds_entries;
2207 * MAC DMA burst size, e.g., For target PCI limit can be
2208 * 0 -default, 1 256B
2210 __le32 dma_burst_size;
2213 * Fixed delimiters to be inserted after every MPDU to
2214 * account for interface latency to avoid underrun.
2216 __le32 mac_aggr_delim;
2219 * determine whether target is responsible for detecting duplicate
2220 * non-aggregate MPDU and timing out stale fragments.
2222 * A-MPDU reordering is always performed on the target.
2224 * 0: target responsible for frag timeout and dup checking
2225 * 1: host responsible for frag timeout and dup checking
2227 __le32 rx_skip_defrag_timeout_dup_detection_check;
2230 * Configuration for VoW :
2231 * No of Video Nodes to be supported
2232 * and Max no of descriptors for each Video link (node).
2236 /* maximum VDEV that could use GTK offload */
2237 __le32 gtk_offload_max_vdev;
2239 /* Number of msdu descriptors target should use */
2240 __le32 num_msdu_desc;
2243 * Max. number of Tx fragments per MSDU
2244 * This parameter controls the max number of Tx fragments per MSDU.
2245 * This is sent by the target as part of the WMI_SERVICE_READY event
2246 * and is overriden by the OS shim as required.
2248 __le32 max_frag_entries;
2251 struct wmi_resource_config_10x {
2252 /* number of virtual devices (VAPs) to support */
2255 /* number of peer nodes to support */
2258 /* number of keys per peer */
2259 __le32 num_peer_keys;
2261 /* total number of TX/RX data TIDs */
2265 * max skid for resolving hash collisions
2267 * The address search table is sparse, so that if two MAC addresses
2268 * result in the same hash value, the second of these conflicting
2269 * entries can slide to the next index in the address search table,
2270 * and use it, if it is unoccupied. This ast_skid_limit parameter
2271 * specifies the upper bound on how many subsequent indices to search
2272 * over to find an unoccupied space.
2274 __le32 ast_skid_limit;
2277 * the nominal chain mask for transmit
2279 * The chain mask may be modified dynamically, e.g. to operate AP
2280 * tx with a reduced number of chains if no clients are associated.
2281 * This configuration parameter specifies the nominal chain-mask that
2282 * should be used when not operating with a reduced set of tx chains.
2284 __le32 tx_chain_mask;
2287 * the nominal chain mask for receive
2289 * The chain mask may be modified dynamically, e.g. for a client
2290 * to use a reduced number of chains for receive if the traffic to
2291 * the client is low enough that it doesn't require downlink MIMO
2292 * or antenna diversity.
2293 * This configuration parameter specifies the nominal chain-mask that
2294 * should be used when not operating with a reduced set of rx chains.
2296 __le32 rx_chain_mask;
2299 * what rx reorder timeout (ms) to use for the AC
2301 * Each WMM access class (voice, video, best-effort, background) will
2302 * have its own timeout value to dictate how long to wait for missing
2303 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2304 * already been received.
2305 * This parameter specifies the timeout in milliseconds for each
2308 __le32 rx_timeout_pri_vi;
2309 __le32 rx_timeout_pri_vo;
2310 __le32 rx_timeout_pri_be;
2311 __le32 rx_timeout_pri_bk;
2314 * what mode the rx should decap packets to
2316 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2317 * THis setting also determines the default TX behavior, however TX
2318 * behavior can be modified on a per VAP basis during VAP init
2320 __le32 rx_decap_mode;
2322 /* what is the maximum number of scan requests that can be queued */
2323 __le32 scan_max_pending_reqs;
2325 /* maximum VDEV that could use BMISS offload */
2326 __le32 bmiss_offload_max_vdev;
2328 /* maximum VDEV that could use offload roaming */
2329 __le32 roam_offload_max_vdev;
2331 /* maximum AP profiles that would push to offload roaming */
2332 __le32 roam_offload_max_ap_profiles;
2335 * how many groups to use for mcast->ucast conversion
2337 * The target's WAL maintains a table to hold information regarding
2338 * which peers belong to a given multicast group, so that if
2339 * multicast->unicast conversion is enabled, the target can convert
2340 * multicast tx frames to a series of unicast tx frames, to each
2341 * peer within the multicast group.
2342 This num_mcast_groups configuration parameter tells the target how
2343 * many multicast groups to provide storage for within its multicast
2344 * group membership table.
2346 __le32 num_mcast_groups;
2349 * size to alloc for the mcast membership table
2351 * This num_mcast_table_elems configuration parameter tells the
2352 * target how many peer elements it needs to provide storage for in
2353 * its multicast group membership table.
2354 * These multicast group membership table elements are shared by the
2355 * multicast groups stored within the table.
2357 __le32 num_mcast_table_elems;
2360 * whether/how to do multicast->unicast conversion
2362 * This configuration parameter specifies whether the target should
2363 * perform multicast --> unicast conversion on transmit, and if so,
2364 * what to do if it finds no entries in its multicast group
2365 * membership table for the multicast IP address in the tx frame.
2366 * Configuration value:
2367 * 0 -> Do not perform multicast to unicast conversion.
2368 * 1 -> Convert multicast frames to unicast, if the IP multicast
2369 * address from the tx frame is found in the multicast group
2370 * membership table. If the IP multicast address is not found,
2372 * 2 -> Convert multicast frames to unicast, if the IP multicast
2373 * address from the tx frame is found in the multicast group
2374 * membership table. If the IP multicast address is not found,
2375 * transmit the frame as multicast.
2377 __le32 mcast2ucast_mode;
2380 * how much memory to allocate for a tx PPDU dbg log
2382 * This parameter controls how much memory the target will allocate
2383 * to store a log of tx PPDU meta-information (how large the PPDU
2384 * was, when it was sent, whether it was successful, etc.)
2386 __le32 tx_dbg_log_size;
2388 /* how many AST entries to be allocated for WDS */
2389 __le32 num_wds_entries;
2392 * MAC DMA burst size, e.g., For target PCI limit can be
2393 * 0 -default, 1 256B
2395 __le32 dma_burst_size;
2398 * Fixed delimiters to be inserted after every MPDU to
2399 * account for interface latency to avoid underrun.
2401 __le32 mac_aggr_delim;
2404 * determine whether target is responsible for detecting duplicate
2405 * non-aggregate MPDU and timing out stale fragments.
2407 * A-MPDU reordering is always performed on the target.
2409 * 0: target responsible for frag timeout and dup checking
2410 * 1: host responsible for frag timeout and dup checking
2412 __le32 rx_skip_defrag_timeout_dup_detection_check;
2415 * Configuration for VoW :
2416 * No of Video Nodes to be supported
2417 * and Max no of descriptors for each Video link (node).
2421 /* Number of msdu descriptors target should use */
2422 __le32 num_msdu_desc;
2425 * Max. number of Tx fragments per MSDU
2426 * This parameter controls the max number of Tx fragments per MSDU.
2427 * This is sent by the target as part of the WMI_SERVICE_READY event
2428 * and is overriden by the OS shim as required.
2430 __le32 max_frag_entries;
2433 enum wmi_10_2_feature_mask {
2434 WMI_10_2_RX_BATCH_MODE = BIT(0),
2435 WMI_10_2_ATF_CONFIG = BIT(1),
2436 WMI_10_2_COEX_GPIO = BIT(3),
2437 WMI_10_2_PEER_STATS = BIT(7),
2440 struct wmi_resource_config_10_2 {
2441 struct wmi_resource_config_10x common;
2442 __le32 max_peer_ext_stats;
2443 __le32 smart_ant_cap; /* 0-disable, 1-enable */
2448 __le32 feature_mask;
2451 #define NUM_UNITS_IS_NUM_VDEVS BIT(0)
2452 #define NUM_UNITS_IS_NUM_PEERS BIT(1)
2453 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2)
2455 struct wmi_resource_config_10_4 {
2456 /* Number of virtual devices (VAPs) to support */
2459 /* Number of peer nodes to support */
2462 /* Number of active peer nodes to support */
2463 __le32 num_active_peers;
2465 /* In offload mode, target supports features like WOW, chatter and other
2466 * protocol offloads. In order to support them some functionalities like
2467 * reorder buffering, PN checking need to be done in target.
2468 * This determines maximum number of peers supported by target in
2471 __le32 num_offload_peers;
2473 /* Number of reorder buffers available for doing target based reorder
2474 * Rx reorder buffering
2476 __le32 num_offload_reorder_buffs;
2478 /* Number of keys per peer */
2479 __le32 num_peer_keys;
2481 /* Total number of TX/RX data TIDs */
2484 /* Max skid for resolving hash collisions.
2485 * The address search table is sparse, so that if two MAC addresses
2486 * result in the same hash value, the second of these conflicting
2487 * entries can slide to the next index in the address search table,
2488 * and use it, if it is unoccupied. This ast_skid_limit parameter
2489 * specifies the upper bound on how many subsequent indices to search
2490 * over to find an unoccupied space.
2492 __le32 ast_skid_limit;
2494 /* The nominal chain mask for transmit.
2495 * The chain mask may be modified dynamically, e.g. to operate AP tx
2496 * with a reduced number of chains if no clients are associated.
2497 * This configuration parameter specifies the nominal chain-mask that
2498 * should be used when not operating with a reduced set of tx chains.
2500 __le32 tx_chain_mask;
2502 /* The nominal chain mask for receive.
2503 * The chain mask may be modified dynamically, e.g. for a client to use
2504 * a reduced number of chains for receive if the traffic to the client
2505 * is low enough that it doesn't require downlink MIMO or antenna
2506 * diversity. This configuration parameter specifies the nominal
2507 * chain-mask that should be used when not operating with a reduced
2510 __le32 rx_chain_mask;
2512 /* What rx reorder timeout (ms) to use for the AC.
2513 * Each WMM access class (voice, video, best-effort, background) will
2514 * have its own timeout value to dictate how long to wait for missing
2515 * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2516 * been received. This parameter specifies the timeout in milliseconds
2519 __le32 rx_timeout_pri[4];
2521 /* What mode the rx should decap packets to.
2522 * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2523 * This setting also determines the default TX behavior, however TX
2524 * behavior can be modified on a per VAP basis during VAP init
2526 __le32 rx_decap_mode;
2528 __le32 scan_max_pending_req;
2530 __le32 bmiss_offload_max_vdev;
2532 __le32 roam_offload_max_vdev;
2534 __le32 roam_offload_max_ap_profiles;
2536 /* How many groups to use for mcast->ucast conversion.
2537 * The target's WAL maintains a table to hold information regarding
2538 * which peers belong to a given multicast group, so that if
2539 * multicast->unicast conversion is enabled, the target can convert
2540 * multicast tx frames to a series of unicast tx frames, to each peer
2541 * within the multicast group. This num_mcast_groups configuration
2542 * parameter tells the target how many multicast groups to provide
2543 * storage for within its multicast group membership table.
2545 __le32 num_mcast_groups;
2547 /* Size to alloc for the mcast membership table.
2548 * This num_mcast_table_elems configuration parameter tells the target
2549 * how many peer elements it needs to provide storage for in its
2550 * multicast group membership table. These multicast group membership
2551 * table elements are shared by the multicast groups stored within
2554 __le32 num_mcast_table_elems;
2556 /* Whether/how to do multicast->unicast conversion.
2557 * This configuration parameter specifies whether the target should
2558 * perform multicast --> unicast conversion on transmit, and if so,
2559 * what to do if it finds no entries in its multicast group membership
2560 * table for the multicast IP address in the tx frame.
2561 * Configuration value:
2562 * 0 -> Do not perform multicast to unicast conversion.
2563 * 1 -> Convert multicast frames to unicast, if the IP multicast address
2564 * from the tx frame is found in the multicast group membership
2565 * table. If the IP multicast address is not found, drop the frame
2566 * 2 -> Convert multicast frames to unicast, if the IP multicast address
2567 * from the tx frame is found in the multicast group membership
2568 * table. If the IP multicast address is not found, transmit the
2569 * frame as multicast.
2571 __le32 mcast2ucast_mode;
2573 /* How much memory to allocate for a tx PPDU dbg log.
2574 * This parameter controls how much memory the target will allocate to
2575 * store a log of tx PPDU meta-information (how large the PPDU was,
2576 * when it was sent, whether it was successful, etc.)
2578 __le32 tx_dbg_log_size;
2580 /* How many AST entries to be allocated for WDS */
2581 __le32 num_wds_entries;
2583 /* MAC DMA burst size. 0 -default, 1 -256B */
2584 __le32 dma_burst_size;
2586 /* Fixed delimiters to be inserted after every MPDU to account for
2587 * interface latency to avoid underrun.
2589 __le32 mac_aggr_delim;
2591 /* Determine whether target is responsible for detecting duplicate
2592 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2593 * is always performed on the target.
2595 * 0: target responsible for frag timeout and dup checking
2596 * 1: host responsible for frag timeout and dup checking
2598 __le32 rx_skip_defrag_timeout_dup_detection_check;
2600 /* Configuration for VoW : No of Video nodes to be supported and max
2601 * no of descriptors for each video link (node).
2605 /* Maximum vdev that could use gtk offload */
2606 __le32 gtk_offload_max_vdev;
2608 /* Number of msdu descriptors target should use */
2609 __le32 num_msdu_desc;
2611 /* Max number of tx fragments per MSDU.
2612 * This parameter controls the max number of tx fragments per MSDU.
2613 * This will passed by target as part of the WMI_SERVICE_READY event
2614 * and is overridden by the OS shim as required.
2616 __le32 max_frag_entries;
2618 /* Max number of extended peer stats.
2619 * This parameter controls the max number of peers for which extended
2620 * statistics are supported by target
2622 __le32 max_peer_ext_stats;
2624 /* Smart antenna capabilities information.
2625 * 1 - Smart antenna is enabled
2626 * 0 - Smart antenna is disabled
2627 * In future this can contain smart antenna specific capabilities.
2629 __le32 smart_ant_cap;
2631 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2639 /* Rx batch mode capability.
2640 * 1 - Rx batch mode enabled
2641 * 0 - Rx batch mode disabled
2643 __le32 rx_batchmode;
2645 /* Thermal throttling capability.
2646 * 1 - Capable of thermal throttling
2647 * 0 - Not capable of thermal throttling
2651 /* ATF configuration.
2657 /* Configure padding to manage IP header un-alignment
2658 * 1 - Enable padding
2659 * 0 - Disable padding
2661 __le32 iphdr_pad_config;
2663 /* qwrap configuration
2664 * 1 - This is qwrap configuration
2665 * 0 - This is not qwrap
2667 __le32 qwrap_config;
2670 /* strucutre describing host memory chunk. */
2671 struct host_memory_chunk {
2672 /* id of the request that is passed up in service ready */
2674 /* the physical address the memory chunk */
2676 /* size of the chunk */
2680 struct wmi_host_mem_chunks {
2682 /* some fw revisions require at least 1 chunk regardless of count */
2683 struct host_memory_chunk items[1];
2686 struct wmi_init_cmd {
2687 struct wmi_resource_config resource_config;
2688 struct wmi_host_mem_chunks mem_chunks;
2691 /* _10x stucture is from 10.X FW API */
2692 struct wmi_init_cmd_10x {
2693 struct wmi_resource_config_10x resource_config;
2694 struct wmi_host_mem_chunks mem_chunks;
2697 struct wmi_init_cmd_10_2 {
2698 struct wmi_resource_config_10_2 resource_config;
2699 struct wmi_host_mem_chunks mem_chunks;
2702 struct wmi_init_cmd_10_4 {
2703 struct wmi_resource_config_10_4 resource_config;
2704 struct wmi_host_mem_chunks mem_chunks;
2707 struct wmi_chan_list_entry {
2709 u8 phy_mode; /* valid for 10.2 only */
2713 /* TLV for channel list */
2714 struct wmi_chan_list {
2715 __le32 tag; /* WMI_CHAN_LIST_TAG */
2717 struct wmi_chan_list_entry channel_list[0];
2720 struct wmi_bssid_list {
2721 __le32 tag; /* WMI_BSSID_LIST_TAG */
2723 struct wmi_mac_addr bssid_list[0];
2726 struct wmi_ie_data {
2727 __le32 tag; /* WMI_IE_TAG */
2737 struct wmi_ssid_list {
2738 __le32 tag; /* WMI_SSID_LIST_TAG */
2740 struct wmi_ssid ssids[0];
2743 /* prefix used by scan requestor ids on the host */
2744 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
2746 /* prefix used by scan request ids generated on the host */
2747 /* host cycles through the lower 12 bits to generate ids */
2748 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
2750 #define WLAN_SCAN_PARAMS_MAX_SSID 16
2751 #define WLAN_SCAN_PARAMS_MAX_BSSID 4
2752 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256
2754 /* Values lower than this may be refused by some firmware revisions with a scan
2755 * completion with a timedout reason.
2757 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
2759 /* Scan priority numbers must be sequential, starting with 0 */
2760 enum wmi_scan_priority {
2761 WMI_SCAN_PRIORITY_VERY_LOW = 0,
2762 WMI_SCAN_PRIORITY_LOW,
2763 WMI_SCAN_PRIORITY_MEDIUM,
2764 WMI_SCAN_PRIORITY_HIGH,
2765 WMI_SCAN_PRIORITY_VERY_HIGH,
2766 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */
2769 struct wmi_start_scan_common {
2772 /* Scan requestor ID */
2774 /* VDEV id(interface) that is requesting scan */
2776 /* Scan Priority, input to scan scheduler */
2777 __le32 scan_priority;
2778 /* Scan events subscription */
2779 __le32 notify_scan_events;
2780 /* dwell time in msec on active channels */
2781 __le32 dwell_time_active;
2782 /* dwell time in msec on passive channels */
2783 __le32 dwell_time_passive;
2785 * min time in msec on the BSS channel,only valid if atleast one
2788 __le32 min_rest_time;
2790 * max rest time in msec on the BSS channel,only valid if at least
2791 * one VDEV is active
2794 * the scanner will rest on the bss channel at least min_rest_time
2795 * after min_rest_time the scanner will start checking for tx/rx
2796 * activity on all VDEVs. if there is no activity the scanner will
2797 * switch to off channel. if there is activity the scanner will let
2798 * the radio on the bss channel until max_rest_time expires.at
2799 * max_rest_time scanner will switch to off channel irrespective of
2800 * activity. activity is determined by the idle_time parameter.
2802 __le32 max_rest_time;
2804 * time before sending next set of probe requests.
2805 * The scanner keeps repeating probe requests transmission with
2806 * period specified by repeat_probe_time.
2807 * The number of probe requests specified depends on the ssid_list
2810 __le32 repeat_probe_time;
2811 /* time in msec between 2 consequetive probe requests with in a set. */
2812 __le32 probe_spacing_time;
2814 * data inactivity time in msec on bss channel that will be used by
2815 * scanner for measuring the inactivity.
2818 /* maximum time in msec allowed for scan */
2819 __le32 max_scan_time;
2821 * delay in msec before sending first probe request after switching
2825 /* Scan control flags */
2826 __le32 scan_ctrl_flags;
2829 struct wmi_start_scan_tlvs {
2830 /* TLV parameters. These includes channel list, ssid list, bssid list,
2836 struct wmi_start_scan_cmd {
2837 struct wmi_start_scan_common common;
2838 __le32 burst_duration_ms;
2839 struct wmi_start_scan_tlvs tlvs;
2842 /* This is the definition from 10.X firmware branch */
2843 struct wmi_10x_start_scan_cmd {
2844 struct wmi_start_scan_common common;
2845 struct wmi_start_scan_tlvs tlvs;
2848 struct wmi_ssid_arg {
2853 struct wmi_bssid_arg {
2857 struct wmi_start_scan_arg {
2862 u32 notify_scan_events;
2863 u32 dwell_time_active;
2864 u32 dwell_time_passive;
2867 u32 repeat_probe_time;
2868 u32 probe_spacing_time;
2872 u32 scan_ctrl_flags;
2873 u32 burst_duration_ms;
2880 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
2882 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
2883 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
2886 /* scan control flags */
2888 /* passively scan all channels including active channels */
2889 #define WMI_SCAN_FLAG_PASSIVE 0x1
2890 /* add wild card ssid probe request even though ssid_list is specified. */
2891 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
2892 /* add cck rates to rates/xrate ie for the generated probe request */
2893 #define WMI_SCAN_ADD_CCK_RATES 0x4
2894 /* add ofdm rates to rates/xrate ie for the generated probe request */
2895 #define WMI_SCAN_ADD_OFDM_RATES 0x8
2896 /* To enable indication of Chan load and Noise floor to host */
2897 #define WMI_SCAN_CHAN_STAT_EVENT 0x10
2898 /* Filter Probe request frames */
2899 #define WMI_SCAN_FILTER_PROBE_REQ 0x20
2900 /* When set, DFS channels will not be scanned */
2901 #define WMI_SCAN_BYPASS_DFS_CHN 0x40
2902 /* Different FW scan engine may choose to bail out on errors.
2903 * Allow the driver to have influence over that. */
2904 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
2906 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
2907 #define WMI_SCAN_CLASS_MASK 0xFF000000
2909 enum wmi_stop_scan_type {
2910 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */
2911 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */
2912 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */
2915 struct wmi_stop_scan_cmd {
2922 struct wmi_stop_scan_arg {
2924 enum wmi_stop_scan_type req_type;
2931 struct wmi_scan_chan_list_cmd {
2932 __le32 num_scan_chans;
2933 struct wmi_channel chan_info[0];
2936 struct wmi_scan_chan_list_arg {
2938 struct wmi_channel_arg *channels;
2941 enum wmi_bss_filter {
2942 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */
2943 WMI_BSS_FILTER_ALL, /* all beacons forwarded */
2944 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */
2945 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
2946 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */
2947 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */
2948 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */
2949 WMI_BSS_FILTER_LAST_BSS, /* marker only */
2952 enum wmi_scan_event_type {
2953 WMI_SCAN_EVENT_STARTED = BIT(0),
2954 WMI_SCAN_EVENT_COMPLETED = BIT(1),
2955 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2),
2956 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3),
2957 WMI_SCAN_EVENT_DEQUEUED = BIT(4),
2958 /* possibly by high-prio scan */
2959 WMI_SCAN_EVENT_PREEMPTED = BIT(5),
2960 WMI_SCAN_EVENT_START_FAILED = BIT(6),
2961 WMI_SCAN_EVENT_RESTARTED = BIT(7),
2962 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
2963 WMI_SCAN_EVENT_MAX = BIT(15),
2966 enum wmi_scan_completion_reason {
2967 WMI_SCAN_REASON_COMPLETED,
2968 WMI_SCAN_REASON_CANCELLED,
2969 WMI_SCAN_REASON_PREEMPTED,
2970 WMI_SCAN_REASON_TIMEDOUT,
2971 WMI_SCAN_REASON_INTERNAL_FAILURE,
2972 WMI_SCAN_REASON_MAX,
2975 struct wmi_scan_event {
2976 __le32 event_type; /* %WMI_SCAN_EVENT_ */
2977 __le32 reason; /* %WMI_SCAN_REASON_ */
2978 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
2985 * This defines how much headroom is kept in the
2986 * receive frame between the descriptor and the
2987 * payload, in order for the WMI PHY error and
2988 * management handler to insert header contents.
2992 #define WMI_MGMT_RX_HDR_HEADROOM 52
2995 * This event will be used for sending scan results
2996 * as well as rx mgmt frames to the host. The rx buffer
2997 * will be sent as part of this WMI event. It would be a
2998 * good idea to pass all the fields in the RX status
2999 * descriptor up to the host.
3001 struct wmi_mgmt_rx_hdr_v1 {
3007 __le32 status; /* %WMI_RX_STATUS_ */
3010 struct wmi_mgmt_rx_hdr_v2 {
3011 struct wmi_mgmt_rx_hdr_v1 v1;
3015 struct wmi_mgmt_rx_event_v1 {
3016 struct wmi_mgmt_rx_hdr_v1 hdr;
3020 struct wmi_mgmt_rx_event_v2 {
3021 struct wmi_mgmt_rx_hdr_v2 hdr;
3025 struct wmi_10_4_mgmt_rx_hdr {
3035 struct wmi_10_4_mgmt_rx_event {
3036 struct wmi_10_4_mgmt_rx_hdr hdr;
3040 #define WMI_RX_STATUS_OK 0x00
3041 #define WMI_RX_STATUS_ERR_CRC 0x01
3042 #define WMI_RX_STATUS_ERR_DECRYPT 0x08
3043 #define WMI_RX_STATUS_ERR_MIC 0x10
3044 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20
3046 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26
3047 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24
3048 #define PHY_ERROR_GEN_RADAR 0x05
3050 #define PHY_ERROR_10_4_RADAR_MASK 0x4
3051 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000
3055 PHY_ERROR_SPECTRAL_SCAN,
3056 PHY_ERROR_FALSE_RADAR_EXT,
3061 __le32 tsf_timestamp;
3068 __le32 rssi_chains[4];
3069 __le16 nf_chains[4];
3074 struct wmi_phyerr_event {
3078 struct wmi_phyerr phyerrs[0];
3081 struct wmi_10_4_phyerr_event {
3090 __le32 rssi_chains[4];
3091 __le16 nf_chains[4];
3092 __le32 phy_err_mask[2];
3093 __le32 tsf_timestamp;
3098 #define PHYERR_TLV_SIG 0xBB
3099 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB
3100 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8
3101 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9
3103 struct phyerr_radar_report {
3104 __le32 reg0; /* RADAR_REPORT_REG0_* */
3105 __le32 reg1; /* REDAR_REPORT_REG1_* */
3108 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000
3109 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31
3111 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000
3112 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30
3114 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000
3115 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20
3117 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000
3118 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16
3120 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00
3121 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10
3123 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF
3124 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0
3126 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000
3127 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31
3129 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000
3130 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24
3132 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000
3133 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16
3135 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00
3136 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8
3138 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF
3139 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0
3141 struct phyerr_fft_report {
3142 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3143 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3146 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000
3147 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23
3149 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000
3150 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14
3152 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000
3153 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12
3155 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF
3156 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0
3158 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000
3159 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26
3161 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000
3162 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18
3164 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00
3165 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8
3167 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF
3168 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0
3176 #define DFS_RSSI_POSSIBLY_FALSE 50
3177 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40
3179 struct wmi_mgmt_tx_hdr {
3181 struct wmi_mac_addr peer_macaddr;
3187 struct wmi_mgmt_tx_cmd {
3188 struct wmi_mgmt_tx_hdr hdr;
3192 struct wmi_echo_event {
3196 struct wmi_echo_cmd {
3200 struct wmi_pdev_set_regdomain_cmd {
3202 __le32 reg_domain_2G;
3203 __le32 reg_domain_5G;
3204 __le32 conformance_test_limit_2G;
3205 __le32 conformance_test_limit_5G;
3208 enum wmi_dfs_region {
3209 /* Uninitialized dfs domain */
3210 WMI_UNINIT_DFS_DOMAIN = 0,
3212 /* FCC3 dfs domain */
3213 WMI_FCC_DFS_DOMAIN = 1,
3215 /* ETSI dfs domain */
3216 WMI_ETSI_DFS_DOMAIN = 2,
3218 /*Japan dfs domain */
3219 WMI_MKK4_DFS_DOMAIN = 3,
3222 struct wmi_pdev_set_regdomain_cmd_10x {
3224 __le32 reg_domain_2G;
3225 __le32 reg_domain_5G;
3226 __le32 conformance_test_limit_2G;
3227 __le32 conformance_test_limit_5G;
3229 /* dfs domain from wmi_dfs_region */
3233 /* Command to set/unset chip in quiet mode */
3234 struct wmi_pdev_set_quiet_cmd {
3238 /* duration in TUs */
3244 /* enable/disable */
3249 * 802.11g protection mode.
3251 enum ath10k_protmode {
3252 ATH10K_PROT_NONE = 0, /* no protection */
3253 ATH10K_PROT_CTSONLY = 1, /* CTS to self */
3254 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */
3257 enum wmi_rtscts_profile {
3258 WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3259 WMI_RTSCTS_FOR_SECOND_RATESERIES,
3260 WMI_RTSCTS_ACROSS_SW_RETRIES
3263 #define WMI_RTSCTS_ENABLED 1
3264 #define WMI_RTSCTS_SET_MASK 0x0f
3265 #define WMI_RTSCTS_SET_LSB 0
3267 #define WMI_RTSCTS_PROFILE_MASK 0xf0
3268 #define WMI_RTSCTS_PROFILE_LSB 4
3270 enum wmi_beacon_gen_mode {
3271 WMI_BEACON_STAGGERED_MODE = 0,
3272 WMI_BEACON_BURST_MODE = 1
3275 enum wmi_csa_event_ies_present_flag {
3276 WMI_CSA_IE_PRESENT = 0x00000001,
3277 WMI_XCSA_IE_PRESENT = 0x00000002,
3278 WMI_WBW_IE_PRESENT = 0x00000004,
3279 WMI_CSWARP_IE_PRESENT = 0x00000008,
3282 /* wmi CSA receive event from beacon frame */
3283 struct wmi_csa_event {
3286 /* Bit 16-31: DUR */
3287 struct wmi_mac_addr i_addr1;
3288 struct wmi_mac_addr i_addr2;
3293 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3296 /* the definition of different PDEV parameters */
3297 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3298 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3299 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
3301 struct wmi_pdev_param_map {
3304 u32 txpower_limit2g;
3305 u32 txpower_limit5g;
3307 u32 beacon_gen_mode;
3309 u32 resmgr_offchan_mode;
3310 u32 protection_mode;
3312 u32 non_agg_sw_retry_th;
3313 u32 agg_sw_retry_th;
3315 u32 ac_aggrsize_scaling;
3317 u32 ltr_ac_latency_be;
3318 u32 ltr_ac_latency_bk;
3319 u32 ltr_ac_latency_vi;
3320 u32 ltr_ac_latency_vo;
3321 u32 ltr_ac_latency_timeout;
3322 u32 ltr_sleep_override;
3323 u32 ltr_rx_override;
3324 u32 ltr_tx_activity_timeout;
3327 u32 pcielp_txbuf_flush;
3328 u32 pcielp_txbuf_watermark;
3329 u32 pcielp_txbuf_tmo_en;
3330 u32 pcielp_txbuf_tmo_value;
3331 u32 pdev_stats_update_period;
3332 u32 vdev_stats_update_period;
3333 u32 peer_stats_update_period;
3334 u32 bcnflt_stats_update_period;
3336 u32 arp_ac_override;
3339 u32 ani_poll_period;
3340 u32 ani_listen_period;
3346 u32 power_gating_sleep;
3347 u32 fast_channel_reset;
3353 u32 smart_antenna_default_antenna;
3354 u32 igmpmld_override;
3358 u32 set_mcast_to_ucast_tid;
3360 u32 set_mcast2ucast_mode;
3361 u32 set_mcast2ucast_buffer;
3362 u32 remove_mcast2ucast_buffer;
3363 u32 peer_sta_ps_statechg_enable;
3364 u32 igmpmld_ac_override;
3366 u32 set_disable_reset_cmdid;
3367 u32 set_msdu_ttl_cmdid;
3368 u32 set_ppdu_duration_cmdid;
3369 u32 txbf_sound_period_cmdid;
3370 u32 set_promisc_mode_cmdid;
3371 u32 set_burst_mode_cmdid;
3373 u32 mu_group_policy;
3374 u32 noise_detection;
3375 u32 noise_threshold;
3377 u32 set_mcast_bcast_echo;
3379 u32 atf_sched_duration;
3381 u32 mgmt_retry_limit;
3382 u32 sensitivity_level;
3383 u32 signed_txpower_2g;
3384 u32 signed_txpower_5g;
3385 u32 enable_per_tid_amsdu;
3386 u32 enable_per_tid_ampdu;
3390 u32 wapi_mbssid_offset;
3395 #define WMI_PDEV_PARAM_UNSUPPORTED 0
3397 enum wmi_pdev_param {
3399 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3401 WMI_PDEV_PARAM_RX_CHAIN_MASK,
3402 /* TX power limit for 2G Radio */
3403 WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3404 /* TX power limit for 5G Radio */
3405 WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3406 /* TX power scale */
3407 WMI_PDEV_PARAM_TXPOWER_SCALE,
3408 /* Beacon generation mode . 0: host, 1: target */
3409 WMI_PDEV_PARAM_BEACON_GEN_MODE,
3410 /* Beacon generation mode . 0: staggered 1: bursted */
3411 WMI_PDEV_PARAM_BEACON_TX_MODE,
3413 * Resource manager off chan mode .
3414 * 0: turn off off chan mode. 1: turn on offchan mode
3416 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3419 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3421 WMI_PDEV_PARAM_PROTECTION_MODE,
3423 * Dynamic bandwidth - 0: disable, 1: enable
3425 * When enabled HW rate control tries different bandwidths when
3426 * retransmitting frames.
3428 WMI_PDEV_PARAM_DYNAMIC_BW,
3429 /* Non aggregrate/ 11g sw retry threshold.0-disable */
3430 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3431 /* aggregrate sw retry threshold. 0-disable*/
3432 WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3433 /* Station kickout threshold (non of consecutive failures).0-disable */
3434 WMI_PDEV_PARAM_STA_KICKOUT_TH,
3435 /* Aggerate size scaling configuration per AC */
3436 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3438 WMI_PDEV_PARAM_LTR_ENABLE,
3439 /* LTR latency for BE, in us */
3440 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3441 /* LTR latency for BK, in us */
3442 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3443 /* LTR latency for VI, in us */
3444 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3445 /* LTR latency for VO, in us */
3446 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3447 /* LTR AC latency timeout, in ms */
3448 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3449 /* LTR platform latency override, in us */
3450 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3451 /* LTR-RX override, in us */
3452 WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3453 /* Tx activity timeout for LTR, in us */
3454 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3455 /* L1SS state machine enable */
3456 WMI_PDEV_PARAM_L1SS_ENABLE,
3457 /* Deep sleep state machine enable */
3458 WMI_PDEV_PARAM_DSLEEP_ENABLE,
3459 /* RX buffering flush enable */
3460 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3461 /* RX buffering matermark */
3462 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3463 /* RX buffering timeout enable */
3464 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3465 /* RX buffering timeout value */
3466 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3467 /* pdev level stats update period in ms */
3468 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3469 /* vdev level stats update period in ms */
3470 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3471 /* peer level stats update period in ms */
3472 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3473 /* beacon filter status update period */
3474 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3475 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3476 WMI_PDEV_PARAM_PMF_QOS,
3477 /* Access category on which ARP frames are sent */
3478 WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3479 /* DCS configuration */
3481 /* Enable/Disable ANI on target */
3482 WMI_PDEV_PARAM_ANI_ENABLE,
3483 /* configure the ANI polling period */
3484 WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3485 /* configure the ANI listening period */
3486 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3487 /* configure OFDM immunity level */
3488 WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3489 /* configure CCK immunity level */
3490 WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3491 /* Enable/Disable CDD for 1x1 STAs in rate control module */
3492 WMI_PDEV_PARAM_DYNTXCHAIN,
3493 /* Enable/Disable proxy STA */
3494 WMI_PDEV_PARAM_PROXY_STA,
3495 /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3496 WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3497 /* Enable/Disable power gating sleep */
3498 WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3501 enum wmi_10x_pdev_param {
3503 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3505 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3506 /* TX power limit for 2G Radio */
3507 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3508 /* TX power limit for 5G Radio */
3509 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3510 /* TX power scale */
3511 WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3512 /* Beacon generation mode . 0: host, 1: target */
3513 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3514 /* Beacon generation mode . 0: staggered 1: bursted */
3515 WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3517 * Resource manager off chan mode .
3518 * 0: turn off off chan mode. 1: turn on offchan mode
3520 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3523 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3525 WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3526 /* Dynamic bandwidth 0: disable 1: enable */
3527 WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3528 /* Non aggregrate/ 11g sw retry threshold.0-disable */
3529 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3530 /* aggregrate sw retry threshold. 0-disable*/
3531 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3532 /* Station kickout threshold (non of consecutive failures).0-disable */
3533 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3534 /* Aggerate size scaling configuration per AC */
3535 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3537 WMI_10X_PDEV_PARAM_LTR_ENABLE,
3538 /* LTR latency for BE, in us */
3539 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3540 /* LTR latency for BK, in us */
3541 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3542 /* LTR latency for VI, in us */
3543 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3544 /* LTR latency for VO, in us */
3545 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3546 /* LTR AC latency timeout, in ms */
3547 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3548 /* LTR platform latency override, in us */
3549 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3550 /* LTR-RX override, in us */
3551 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3552 /* Tx activity timeout for LTR, in us */
3553 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3554 /* L1SS state machine enable */
3555 WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3556 /* Deep sleep state machine enable */
3557 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3558 /* pdev level stats update period in ms */
3559 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3560 /* vdev level stats update period in ms */
3561 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3562 /* peer level stats update period in ms */
3563 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3564 /* beacon filter status update period */
3565 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3566 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3567 WMI_10X_PDEV_PARAM_PMF_QOS,
3568 /* Access category on which ARP and DHCP frames are sent */
3569 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3570 /* DCS configuration */
3571 WMI_10X_PDEV_PARAM_DCS,
3572 /* Enable/Disable ANI on target */
3573 WMI_10X_PDEV_PARAM_ANI_ENABLE,
3574 /* configure the ANI polling period */
3575 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
3576 /* configure the ANI listening period */
3577 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
3578 /* configure OFDM immunity level */
3579 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
3580 /* configure CCK immunity level */
3581 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
3582 /* Enable/Disable CDD for 1x1 STAs in rate control module */
3583 WMI_10X_PDEV_PARAM_DYNTXCHAIN,
3584 /* Enable/Disable Fast channel reset*/
3585 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
3586 /* Set Bursting DUR */
3587 WMI_10X_PDEV_PARAM_BURST_DUR,
3588 /* Set Bursting Enable*/
3589 WMI_10X_PDEV_PARAM_BURST_ENABLE,
3591 /* following are available as of firmware 10.2 */
3592 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
3593 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
3594 WMI_10X_PDEV_PARAM_IGMPMLD_TID,
3595 WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
3596 WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
3597 WMI_10X_PDEV_PARAM_RX_FILTER,
3598 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
3599 WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
3600 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
3601 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
3602 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
3603 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
3604 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
3605 WMI_10X_PDEV_PARAM_CAL_PERIOD
3608 enum wmi_10_4_pdev_param {
3609 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3610 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
3611 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
3612 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
3613 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
3614 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
3615 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
3616 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3617 WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
3618 WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
3619 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3620 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
3621 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
3622 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3623 WMI_10_4_PDEV_PARAM_LTR_ENABLE,
3624 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
3625 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
3626 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
3627 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
3628 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3629 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3630 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
3631 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3632 WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
3633 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
3634 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3635 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3636 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3637 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3638 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3639 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3640 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3641 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3642 WMI_10_4_PDEV_PARAM_PMF_QOS,
3643 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
3644 WMI_10_4_PDEV_PARAM_DCS,
3645 WMI_10_4_PDEV_PARAM_ANI_ENABLE,
3646 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
3647 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
3648 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
3649 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
3650 WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
3651 WMI_10_4_PDEV_PARAM_PROXY_STA,
3652 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
3653 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
3654 WMI_10_4_PDEV_PARAM_AGGR_BURST,
3655 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
3656 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
3657 WMI_10_4_PDEV_PARAM_BURST_DUR,
3658 WMI_10_4_PDEV_PARAM_BURST_ENABLE,
3659 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
3660 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
3661 WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
3662 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
3663 WMI_10_4_PDEV_PARAM_RX_FILTER,
3664 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
3665 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
3666 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
3667 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
3668 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
3669 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
3670 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
3671 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
3672 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
3673 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
3674 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
3675 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
3676 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
3677 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
3678 WMI_10_4_PDEV_PARAM_EN_STATS,
3679 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
3680 WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
3681 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
3682 WMI_10_4_PDEV_PARAM_DPD_ENABLE,
3683 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
3684 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
3685 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
3686 WMI_10_4_PDEV_PARAM_ANT_PLZN,
3687 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
3688 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
3689 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
3690 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
3691 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
3692 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
3693 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
3694 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
3695 WMI_10_4_PDEV_PARAM_CAL_PERIOD,
3696 WMI_10_4_PDEV_PARAM_PDEV_RESET,
3697 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
3698 WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
3699 WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
3700 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
3701 WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
3702 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
3703 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
3704 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
3705 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
3708 struct wmi_pdev_set_param_cmd {
3713 /* valid period is 1 ~ 60000ms, unit in millisecond */
3714 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
3716 struct wmi_pdev_get_tpc_config_cmd {
3721 #define WMI_TPC_CONFIG_PARAM 1
3722 #define WMI_TPC_RATE_MAX 160
3723 #define WMI_TPC_TX_N_CHAIN 4
3724 #define WMI_TPC_PREAM_TABLE_MAX 10
3725 #define WMI_TPC_FLAG 3
3726 #define WMI_TPC_BUF_SIZE 10
3728 enum wmi_tpc_table_type {
3729 WMI_TPC_TABLE_TYPE_CDD = 0,
3730 WMI_TPC_TABLE_TYPE_STBC = 1,
3731 WMI_TPC_TABLE_TYPE_TXBF = 2,
3734 enum wmi_tpc_config_event_flag {
3735 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1,
3736 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2,
3737 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4,
3740 struct wmi_pdev_tpc_config_event {
3744 __le32 twice_antenna_reduction;
3745 __le32 twice_max_rd_power;
3746 a_sle32 twice_antenna_gain;
3749 __le32 num_tx_chain;
3752 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
3753 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
3754 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
3755 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
3756 u8 rates_array[WMI_TPC_RATE_MAX];
3759 /* Transmit power scale factor. */
3761 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */
3762 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */
3763 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */
3764 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */
3765 WMI_TP_SCALE_MIN = 4, /* min, but still on */
3766 WMI_TP_SCALE_SIZE = 5, /* max num of enum */
3769 struct wmi_pdev_chanlist_update_event {
3770 /* number of channels */
3772 /* array of channels */
3773 struct wmi_channel channel_list[1];
3776 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
3778 struct wmi_debug_mesg_event {
3779 /* message buffer, NULL terminated */
3780 char bufp[WMI_MAX_DEBUG_MESG];
3785 VDEV_SUBTYPE_P2PDEV = 0,
3787 VDEV_SUBTYPE_P2PCLI,
3794 struct wmi_pdev_set_channel_cmd {
3795 /* idnore power , only use flags , mode and freq */
3796 struct wmi_channel chan;
3799 struct wmi_pdev_pktlog_enable_cmd {
3803 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
3804 #define WMI_DSCP_MAP_MAX (64)
3805 struct wmi_pdev_set_dscp_tid_map_cmd {
3806 /* map indicating DSCP to TID conversion */
3807 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
3810 enum mcast_bcast_rate_id {
3815 struct mcast_bcast_rate {
3816 enum mcast_bcast_rate_id rate_id;
3820 struct wmi_wmm_params {
3829 struct wmi_pdev_set_wmm_params {
3830 struct wmi_wmm_params ac_be;
3831 struct wmi_wmm_params ac_bk;
3832 struct wmi_wmm_params ac_vi;
3833 struct wmi_wmm_params ac_vo;
3836 struct wmi_wmm_params_arg {
3845 struct wmi_wmm_params_all_arg {
3846 struct wmi_wmm_params_arg ac_be;
3847 struct wmi_wmm_params_arg ac_bk;
3848 struct wmi_wmm_params_arg ac_vi;
3849 struct wmi_wmm_params_arg ac_vo;
3852 struct wmi_pdev_stats_tx {
3853 /* Num HTT cookies queued to dispatch list */
3856 /* Num HTT cookies dispatched */
3857 __le32 comp_delivered;
3859 /* Num MSDU queued to WAL */
3862 /* Num MPDU queue to WAL */
3865 /* Num MSDUs dropped by WMM limit */
3868 /* Num Local frames queued */
3869 __le32 local_enqued;
3871 /* Num Local frames done */
3874 /* Num queued to HW */
3877 /* Num PPDU reaped from HW */
3883 /* Num PPDUs cleaned up in TX abort */
3886 /* Num MPDUs requed by SW */
3887 __le32 mpdus_requed;
3889 /* excessive retries */
3892 /* data hw rate code */
3895 /* Scheduler self triggers */
3896 __le32 self_triggers;
3898 /* frames dropped due to excessive sw retries */
3899 __le32 sw_retry_failure;
3901 /* illegal rate phy errors */
3902 __le32 illgl_rate_phy_err;
3904 /* wal pdev continous xretry */
3905 __le32 pdev_cont_xretry;
3907 /* wal pdev continous xretry */
3908 __le32 pdev_tx_timeout;
3910 /* wal pdev resets */
3913 /* frames dropped due to non-availability of stateless TIDs */
3914 __le32 stateless_tid_alloc_failure;
3916 __le32 phy_underrun;
3918 /* MPDU is more than txop limit */
3922 struct wmi_10_4_pdev_stats_tx {
3923 /* Num HTT cookies queued to dispatch list */
3926 /* Num HTT cookies dispatched */
3927 __le32 comp_delivered;
3929 /* Num MSDU queued to WAL */
3932 /* Num MPDU queue to WAL */
3935 /* Num MSDUs dropped by WMM limit */
3938 /* Num Local frames queued */
3939 __le32 local_enqued;
3941 /* Num Local frames done */
3944 /* Num queued to HW */
3947 /* Num PPDU reaped from HW */
3956 /* Num PPDUs cleaned up in TX abort */
3959 /* Num MPDUs requed by SW */
3960 __le32 mpdus_requed;
3962 /* excessive retries */
3965 /* data hw rate code */
3968 /* Scheduler self triggers */
3969 __le32 self_triggers;
3971 /* frames dropped due to excessive sw retries */
3972 __le32 sw_retry_failure;
3974 /* illegal rate phy errors */
3975 __le32 illgl_rate_phy_err;
3977 /* wal pdev continuous xretry */
3978 __le32 pdev_cont_xretry;
3980 /* wal pdev tx timeouts */
3981 __le32 pdev_tx_timeout;
3983 /* wal pdev resets */
3986 /* frames dropped due to non-availability of stateless TIDs */
3987 __le32 stateless_tid_alloc_failure;
3989 __le32 phy_underrun;
3991 /* MPDU is more than txop limit */
3994 /* Number of Sequences posted */
3997 /* Number of Sequences failed queueing */
3998 __le32 seq_failed_queueing;
4000 /* Number of Sequences completed */
4001 __le32 seq_completed;
4003 /* Number of Sequences restarted */
4004 __le32 seq_restarted;
4006 /* Number of MU Sequences posted */
4007 __le32 mu_seq_posted;
4009 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4010 __le32 mpdus_sw_flush;
4012 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4013 __le32 mpdus_hw_filter;
4015 /* Num MPDUs truncated by PDG
4016 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4018 __le32 mpdus_truncated;
4020 /* Num MPDUs that was tried but didn't receive ACK or BA */
4021 __le32 mpdus_ack_failed;
4023 /* Num MPDUs that was dropped due to expiry. */
4024 __le32 mpdus_expired;
4027 struct wmi_pdev_stats_rx {
4028 /* Cnts any change in ring routing mid-ppdu */
4029 __le32 mid_ppdu_route_change;
4031 /* Total number of statuses processed */
4034 /* Extra frags on rings 0-3 */
4040 /* MSDUs / MPDUs delivered to HTT */
4044 /* MSDUs / MPDUs delivered to local stack */
4048 /* AMSDUs that have more MSDUs than the status ring size */
4049 __le32 oversize_amsdu;
4051 /* Number of PHY errors */
4054 /* Number of PHY errors drops */
4055 __le32 phy_err_drop;
4057 /* Number of mpdu errors - FCS, MIC, ENC etc. */
4061 struct wmi_pdev_stats_peer {
4062 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4067 WMI_STAT_PEER = BIT(0),
4068 WMI_STAT_AP = BIT(1),
4069 WMI_STAT_PDEV = BIT(2),
4070 WMI_STAT_VDEV = BIT(3),
4071 WMI_STAT_BCNFLT = BIT(4),
4072 WMI_STAT_VDEV_RATE = BIT(5),
4075 struct wlan_inst_rssi_args {
4076 __le16 cfg_retry_count;
4080 struct wmi_request_stats_cmd {
4085 /* peer MAC address */
4086 struct wmi_mac_addr peer_macaddr;
4088 /* Instantaneous RSSI arguments */
4089 struct wlan_inst_rssi_args inst_rssi_args;
4092 /* Suspend option */
4097 /* suspend and disable all interrupts */
4098 WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4101 struct wmi_pdev_suspend_cmd {
4102 /* suspend option sent to target */
4106 struct wmi_stats_event {
4107 __le32 stats_id; /* WMI_STAT_ */
4109 * number of pdev stats event structures
4110 * (wmi_pdev_stats) 0 or 1
4112 __le32 num_pdev_stats;
4114 * number of vdev stats event structures
4115 * (wmi_vdev_stats) 0 or max vdevs
4117 __le32 num_vdev_stats;
4119 * number of peer stats event structures
4120 * (wmi_peer_stats) 0 or max peers
4122 __le32 num_peer_stats;
4123 __le32 num_bcnflt_stats;
4126 * num_pdev_stats * size of(struct wmi_pdev_stats)
4127 * num_vdev_stats * size of(struct wmi_vdev_stats)
4128 * num_peer_stats * size of(struct wmi_peer_stats)
4130 * By having a zero sized array, the pointer to data area
4131 * becomes available without increasing the struct size
4136 struct wmi_10_2_stats_event {
4137 __le32 stats_id; /* %WMI_REQUEST_ */
4138 __le32 num_pdev_stats;
4139 __le32 num_pdev_ext_stats;
4140 __le32 num_vdev_stats;
4141 __le32 num_peer_stats;
4142 __le32 num_bcnflt_stats;
4148 * TODO: add all PDEV stats here
4150 struct wmi_pdev_stats_base {
4152 __le32 tx_frame_count;
4153 __le32 rx_frame_count;
4154 __le32 rx_clear_count;
4156 __le32 phy_err_count;
4160 struct wmi_pdev_stats {
4161 struct wmi_pdev_stats_base base;
4162 struct wmi_pdev_stats_tx tx;
4163 struct wmi_pdev_stats_rx rx;
4164 struct wmi_pdev_stats_peer peer;
4167 struct wmi_pdev_stats_extra {
4173 __le32 mib_int_count;
4176 struct wmi_10x_pdev_stats {
4177 struct wmi_pdev_stats_base base;
4178 struct wmi_pdev_stats_tx tx;
4179 struct wmi_pdev_stats_rx rx;
4180 struct wmi_pdev_stats_peer peer;
4181 struct wmi_pdev_stats_extra extra;
4184 struct wmi_pdev_stats_mem {
4189 struct wmi_10_2_pdev_stats {
4190 struct wmi_pdev_stats_base base;
4191 struct wmi_pdev_stats_tx tx;
4193 struct wmi_pdev_stats_rx rx;
4194 __le32 pdev_rx_timeout;
4195 struct wmi_pdev_stats_mem mem;
4196 struct wmi_pdev_stats_peer peer;
4197 struct wmi_pdev_stats_extra extra;
4200 struct wmi_10_4_pdev_stats {
4201 struct wmi_pdev_stats_base base;
4202 struct wmi_10_4_pdev_stats_tx tx;
4203 struct wmi_pdev_stats_rx rx;
4204 __le32 rx_ovfl_errs;
4205 struct wmi_pdev_stats_mem mem;
4206 __le32 sram_free_size;
4207 struct wmi_pdev_stats_extra extra;
4212 * TODO: add all VDEV stats here
4214 struct wmi_vdev_stats {
4220 * TODO: add more stats
4222 struct wmi_peer_stats {
4223 struct wmi_mac_addr peer_macaddr;
4225 __le32 peer_tx_rate;
4228 struct wmi_10x_peer_stats {
4229 struct wmi_peer_stats old;
4230 __le32 peer_rx_rate;
4233 struct wmi_10_2_peer_stats {
4234 struct wmi_peer_stats old;
4235 __le32 peer_rx_rate;
4238 __le32 tx_rate_count;
4239 __le32 max_4ms_frame_len;
4240 __le32 total_sub_frames;
4242 __le32 num_pkt_loss_overflow[4];
4243 __le32 num_pkt_loss_excess_retry[4];
4246 struct wmi_10_2_4_peer_stats {
4247 struct wmi_10_2_peer_stats common;
4248 __le32 peer_rssi_changed;
4251 struct wmi_10_2_4_ext_peer_stats {
4252 struct wmi_10_2_peer_stats common;
4253 __le32 peer_rssi_changed;
4257 struct wmi_10_4_peer_stats {
4258 struct wmi_mac_addr peer_macaddr;
4260 __le32 peer_rssi_seq_num;
4261 __le32 peer_tx_rate;
4262 __le32 peer_rx_rate;
4265 __le32 tx_rate_count;
4266 __le32 max_4ms_frame_len;
4267 __le32 total_sub_frames;
4269 __le32 num_pkt_loss_overflow[4];
4270 __le32 num_pkt_loss_excess_retry[4];
4271 __le32 peer_rssi_changed;
4274 struct wmi_10_2_pdev_ext_stats {
4275 __le32 rx_rssi_comb;
4282 struct wmi_vdev_create_cmd {
4285 __le32 vdev_subtype;
4286 struct wmi_mac_addr vdev_macaddr;
4289 enum wmi_vdev_type {
4290 WMI_VDEV_TYPE_AP = 1,
4291 WMI_VDEV_TYPE_STA = 2,
4292 WMI_VDEV_TYPE_IBSS = 3,
4293 WMI_VDEV_TYPE_MONITOR = 4,
4296 enum wmi_vdev_subtype {
4297 WMI_VDEV_SUBTYPE_NONE,
4298 WMI_VDEV_SUBTYPE_P2P_DEVICE,
4299 WMI_VDEV_SUBTYPE_P2P_CLIENT,
4300 WMI_VDEV_SUBTYPE_P2P_GO,
4301 WMI_VDEV_SUBTYPE_PROXY_STA,
4302 WMI_VDEV_SUBTYPE_MESH_11S,
4303 WMI_VDEV_SUBTYPE_MESH_NON_11S,
4306 enum wmi_vdev_subtype_legacy {
4307 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0,
4308 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1,
4309 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2,
4310 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3,
4311 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
4314 enum wmi_vdev_subtype_10_2_4 {
4315 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0,
4316 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1,
4317 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2,
4318 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3,
4319 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
4320 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5,
4323 enum wmi_vdev_subtype_10_4 {
4324 WMI_VDEV_SUBTYPE_10_4_NONE = 0,
4325 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1,
4326 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2,
4327 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3,
4328 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4,
4329 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
4330 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6,
4333 /* values for vdev_subtype */
4335 /* values for vdev_start_request flags */
4337 * Indicates that AP VDEV uses hidden ssid. only valid for
4339 #define WMI_VDEV_START_HIDDEN_SSID (1<<0)
4341 * Indicates if robust management frame/management frame
4342 * protection is enabled. For GO/AP vdevs, it indicates that
4343 * it may support station/client associations with RMF enabled.
4344 * For STA/client vdevs, it indicates that sta will
4345 * associate with AP with RMF enabled. */
4346 #define WMI_VDEV_START_PMF_ENABLED (1<<1)
4348 struct wmi_p2p_noa_descriptor {
4349 __le32 type_count; /* 255: continuous schedule, 0: reserved */
4350 __le32 duration; /* Absent period duration in micro seconds */
4351 __le32 interval; /* Absent period interval in micro seconds */
4352 __le32 start_time; /* 32 bit tsf time when in starts */
4355 struct wmi_vdev_start_request_cmd {
4357 struct wmi_channel chan;
4358 /* unique id identifying the VDEV, generated by the caller */
4360 /* requestor id identifying the caller module */
4361 __le32 requestor_id;
4362 /* beacon interval from received beacon */
4363 __le32 beacon_interval;
4364 /* DTIM Period from the received beacon */
4368 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4369 struct wmi_ssid ssid;
4370 /* beacon/probe reponse xmit rate. Applicable for SoftAP. */
4372 /* beacon/probe reponse xmit power. Applicable for SoftAP. */
4373 __le32 bcn_tx_power;
4374 /* number of p2p NOA descriptor(s) from scan entry */
4375 __le32 num_noa_descriptors;
4377 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4378 * During CAC, Our HW shouldn't ack ditected frames
4380 __le32 disable_hw_ack;
4381 /* actual p2p NOA descriptor from scan entry */
4382 struct wmi_p2p_noa_descriptor noa_descriptors[2];
4385 struct wmi_vdev_restart_request_cmd {
4386 struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4389 struct wmi_vdev_start_request_arg {
4391 struct wmi_channel_arg channel;
4398 bool disable_hw_ack;
4403 struct wmi_vdev_delete_cmd {
4404 /* unique id identifying the VDEV, generated by the caller */
4408 struct wmi_vdev_up_cmd {
4410 __le32 vdev_assoc_id;
4411 struct wmi_mac_addr vdev_bssid;
4414 struct wmi_vdev_stop_cmd {
4418 struct wmi_vdev_down_cmd {
4422 struct wmi_vdev_standby_response_cmd {
4423 /* unique id identifying the VDEV, generated by the caller */
4427 struct wmi_vdev_resume_response_cmd {
4428 /* unique id identifying the VDEV, generated by the caller */
4432 struct wmi_vdev_set_param_cmd {
4438 #define WMI_MAX_KEY_INDEX 3
4439 #define WMI_MAX_KEY_LEN 32
4441 #define WMI_KEY_PAIRWISE 0x00
4442 #define WMI_KEY_GROUP 0x01
4443 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
4445 struct wmi_key_seq_counter {
4446 __le32 key_seq_counter_l;
4447 __le32 key_seq_counter_h;
4450 #define WMI_CIPHER_NONE 0x0 /* clear key */
4451 #define WMI_CIPHER_WEP 0x1
4452 #define WMI_CIPHER_TKIP 0x2
4453 #define WMI_CIPHER_AES_OCB 0x3
4454 #define WMI_CIPHER_AES_CCM 0x4
4455 #define WMI_CIPHER_WAPI 0x5
4456 #define WMI_CIPHER_CKIP 0x6
4457 #define WMI_CIPHER_AES_CMAC 0x7
4459 struct wmi_vdev_install_key_cmd {
4461 struct wmi_mac_addr peer_macaddr;
4464 __le32 key_cipher; /* %WMI_CIPHER_ */
4465 struct wmi_key_seq_counter key_rsc_counter;
4466 struct wmi_key_seq_counter key_global_rsc_counter;
4467 struct wmi_key_seq_counter key_tsc_counter;
4468 u8 wpi_key_rsc_counter[16];
4469 u8 wpi_key_tsc_counter[16];
4471 __le32 key_txmic_len;
4472 __le32 key_rxmic_len;
4474 /* contains key followed by tx mic followed by rx mic */
4478 struct wmi_vdev_install_key_arg {
4487 const void *key_data;
4491 * vdev fixed rate format:
4492 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
4493 * - nss - b5:b4 - ss number (0 mean 1ss)
4494 * - rate_mcs - b3:b0 - as below
4495 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
4496 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
4497 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
4498 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
4502 /* Preamble types to be used with VDEV fixed rate configuration */
4503 enum wmi_rate_preamble {
4504 WMI_RATE_PREAMBLE_OFDM,
4505 WMI_RATE_PREAMBLE_CCK,
4506 WMI_RATE_PREAMBLE_HT,
4507 WMI_RATE_PREAMBLE_VHT,
4510 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3))
4511 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3)
4512 #define ATH10K_HW_RATECODE(rate, nss, preamble) \
4513 (((preamble) << 6) | ((nss) << 4) | (rate))
4515 /* Value to disable fixed rate setting */
4516 #define WMI_FIXED_RATE_NONE (0xff)
4518 struct wmi_vdev_param_map {
4520 u32 fragmentation_threshold;
4521 u32 beacon_interval;
4522 u32 listen_interval;
4528 u32 wmi_vdev_stats_update_period;
4529 u32 wmi_vdev_pwrsave_ageout_time;
4530 u32 wmi_vdev_host_swba_interval;
4532 u32 wmi_vdev_oc_scheduler_air_time_limit;
4535 u32 bmiss_count_max;
4536 u32 bmiss_first_bcnt;
4537 u32 bmiss_final_bcnt;
4541 u32 disable_htprotection;
4542 u32 sta_quickkickout;
4544 u32 protection_mode;
4553 u32 bcast_data_rate;
4554 u32 mcast_data_rate;
4557 u32 unknown_dest_indicate;
4558 u32 ap_keepalive_min_idle_inactive_time_secs;
4559 u32 ap_keepalive_max_idle_inactive_time_secs;
4560 u32 ap_keepalive_max_unresponsive_time_secs;
4561 u32 ap_enable_nawds;
4562 u32 mcast2ucast_set;
4565 u32 packet_powersave;
4568 u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
4575 u32 early_rx_adjust_enable;
4576 u32 early_rx_tgt_bmiss_num;
4577 u32 early_rx_bmiss_sample_cycle;
4578 u32 early_rx_slop_step;
4579 u32 early_rx_init_slop;
4580 u32 early_rx_adjust_pause;
4584 u32 bw_nss_ratemask;
4587 #define WMI_VDEV_PARAM_UNSUPPORTED 0
4589 /* the definition of different VDEV parameters */
4590 enum wmi_vdev_param {
4592 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
4593 /* Fragmentation threshold */
4594 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
4595 /* beacon interval in TUs */
4596 WMI_VDEV_PARAM_BEACON_INTERVAL,
4597 /* Listen interval in TUs */
4598 WMI_VDEV_PARAM_LISTEN_INTERVAL,
4599 /* muticast rate in Mbps */
4600 WMI_VDEV_PARAM_MULTICAST_RATE,
4601 /* management frame rate in Mbps */
4602 WMI_VDEV_PARAM_MGMT_TX_RATE,
4603 /* slot time (long vs short) */
4604 WMI_VDEV_PARAM_SLOT_TIME,
4605 /* preamble (long vs short) */
4606 WMI_VDEV_PARAM_PREAMBLE,
4607 /* SWBA time (time before tbtt in msec) */
4608 WMI_VDEV_PARAM_SWBA_TIME,
4609 /* time period for updating VDEV stats */
4610 WMI_VDEV_STATS_UPDATE_PERIOD,
4611 /* age out time in msec for frames queued for station in power save */
4612 WMI_VDEV_PWRSAVE_AGEOUT_TIME,
4614 * Host SWBA interval (time in msec before tbtt for SWBA event
4617 WMI_VDEV_HOST_SWBA_INTERVAL,
4618 /* DTIM period (specified in units of num beacon intervals) */
4619 WMI_VDEV_PARAM_DTIM_PERIOD,
4621 * scheduler air time limit for this VDEV. used by off chan
4624 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
4625 /* enable/dsiable WDS for this VDEV */
4628 WMI_VDEV_PARAM_ATIM_WINDOW,
4630 WMI_VDEV_PARAM_BMISS_COUNT_MAX,
4631 /* BMISS first time */
4632 WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
4633 /* BMISS final time */
4634 WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
4635 /* WMM enables/disabled */
4636 WMI_VDEV_PARAM_FEATURE_WMM,
4638 WMI_VDEV_PARAM_CHWIDTH,
4639 /* Channel Offset */
4640 WMI_VDEV_PARAM_CHEXTOFFSET,
4641 /* Disable HT Protection */
4642 WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
4643 /* Quick STA Kickout */
4644 WMI_VDEV_PARAM_STA_QUICKKICKOUT,
4645 /* Rate to be used with Management frames */
4646 WMI_VDEV_PARAM_MGMT_RATE,
4647 /* Protection Mode */
4648 WMI_VDEV_PARAM_PROTECTION_MODE,
4649 /* Fixed rate setting */
4650 WMI_VDEV_PARAM_FIXED_RATE,
4651 /* Short GI Enable/Disable */
4654 WMI_VDEV_PARAM_LDPC,
4655 /* Enable Tx STBC */
4656 WMI_VDEV_PARAM_TX_STBC,
4657 /* Enable Rx STBC */
4658 WMI_VDEV_PARAM_RX_STBC,
4659 /* Intra BSS forwarding */
4660 WMI_VDEV_PARAM_INTRA_BSS_FWD,
4661 /* Setting Default xmit key for Vdev */
4662 WMI_VDEV_PARAM_DEF_KEYID,
4665 /* Set the custom rate for the broadcast data frames */
4666 WMI_VDEV_PARAM_BCAST_DATA_RATE,
4667 /* Set the custom rate (rate-code) for multicast data frames */
4668 WMI_VDEV_PARAM_MCAST_DATA_RATE,
4669 /* Tx multicast packet indicate Enable/Disable */
4670 WMI_VDEV_PARAM_MCAST_INDICATE,
4671 /* Tx DHCP packet indicate Enable/Disable */
4672 WMI_VDEV_PARAM_DHCP_INDICATE,
4673 /* Enable host inspection of Tx unicast packet to unknown destination */
4674 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
4676 /* The minimum amount of time AP begins to consider STA inactive */
4677 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
4680 * An associated STA is considered inactive when there is no recent
4681 * TX/RX activity and no downlink frames are buffered for it. Once a
4682 * STA exceeds the maximum idle inactive time, the AP will send an
4683 * 802.11 data-null as a keep alive to verify the STA is still
4684 * associated. If the STA does ACK the data-null, or if the data-null
4685 * is buffered and the STA does not retrieve it, the STA will be
4686 * considered unresponsive
4687 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
4689 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
4692 * An associated STA is considered unresponsive if there is no recent
4693 * TX/RX activity and downlink frames are buffered for it. Once a STA
4694 * exceeds the maximum unresponsive time, the AP will send a
4695 * WMI_STA_KICKOUT event to the host so the STA can be deleted. */
4696 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
4698 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
4699 WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
4700 /* Enable/Disable RTS-CTS */
4701 WMI_VDEV_PARAM_ENABLE_RTSCTS,
4702 /* Enable TXBFee/er */
4703 WMI_VDEV_PARAM_TXBF,
4705 /* Set packet power save */
4706 WMI_VDEV_PARAM_PACKET_POWERSAVE,
4709 * Drops un-encrypted packets if eceived in an encrypted connection
4710 * otherwise forwards to host.
4712 WMI_VDEV_PARAM_DROP_UNENCRY,
4715 * Set the encapsulation type for frames.
4717 WMI_VDEV_PARAM_TX_ENCAP_TYPE,
4720 /* the definition of different VDEV parameters */
4721 enum wmi_10x_vdev_param {
4723 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
4724 /* Fragmentation threshold */
4725 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
4726 /* beacon interval in TUs */
4727 WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
4728 /* Listen interval in TUs */
4729 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
4730 /* muticast rate in Mbps */
4731 WMI_10X_VDEV_PARAM_MULTICAST_RATE,
4732 /* management frame rate in Mbps */
4733 WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
4734 /* slot time (long vs short) */
4735 WMI_10X_VDEV_PARAM_SLOT_TIME,
4736 /* preamble (long vs short) */
4737 WMI_10X_VDEV_PARAM_PREAMBLE,
4738 /* SWBA time (time before tbtt in msec) */
4739 WMI_10X_VDEV_PARAM_SWBA_TIME,
4740 /* time period for updating VDEV stats */
4741 WMI_10X_VDEV_STATS_UPDATE_PERIOD,
4742 /* age out time in msec for frames queued for station in power save */
4743 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
4745 * Host SWBA interval (time in msec before tbtt for SWBA event
4748 WMI_10X_VDEV_HOST_SWBA_INTERVAL,
4749 /* DTIM period (specified in units of num beacon intervals) */
4750 WMI_10X_VDEV_PARAM_DTIM_PERIOD,
4752 * scheduler air time limit for this VDEV. used by off chan
4755 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
4756 /* enable/dsiable WDS for this VDEV */
4757 WMI_10X_VDEV_PARAM_WDS,
4759 WMI_10X_VDEV_PARAM_ATIM_WINDOW,
4761 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
4762 /* WMM enables/disabled */
4763 WMI_10X_VDEV_PARAM_FEATURE_WMM,
4765 WMI_10X_VDEV_PARAM_CHWIDTH,
4766 /* Channel Offset */
4767 WMI_10X_VDEV_PARAM_CHEXTOFFSET,
4768 /* Disable HT Protection */
4769 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
4770 /* Quick STA Kickout */
4771 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
4772 /* Rate to be used with Management frames */
4773 WMI_10X_VDEV_PARAM_MGMT_RATE,
4774 /* Protection Mode */
4775 WMI_10X_VDEV_PARAM_PROTECTION_MODE,
4776 /* Fixed rate setting */
4777 WMI_10X_VDEV_PARAM_FIXED_RATE,
4778 /* Short GI Enable/Disable */
4779 WMI_10X_VDEV_PARAM_SGI,
4781 WMI_10X_VDEV_PARAM_LDPC,
4782 /* Enable Tx STBC */
4783 WMI_10X_VDEV_PARAM_TX_STBC,
4784 /* Enable Rx STBC */
4785 WMI_10X_VDEV_PARAM_RX_STBC,
4786 /* Intra BSS forwarding */
4787 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
4788 /* Setting Default xmit key for Vdev */
4789 WMI_10X_VDEV_PARAM_DEF_KEYID,
4791 WMI_10X_VDEV_PARAM_NSS,
4792 /* Set the custom rate for the broadcast data frames */
4793 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
4794 /* Set the custom rate (rate-code) for multicast data frames */
4795 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
4796 /* Tx multicast packet indicate Enable/Disable */
4797 WMI_10X_VDEV_PARAM_MCAST_INDICATE,
4798 /* Tx DHCP packet indicate Enable/Disable */
4799 WMI_10X_VDEV_PARAM_DHCP_INDICATE,
4800 /* Enable host inspection of Tx unicast packet to unknown destination */
4801 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
4803 /* The minimum amount of time AP begins to consider STA inactive */
4804 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
4807 * An associated STA is considered inactive when there is no recent
4808 * TX/RX activity and no downlink frames are buffered for it. Once a
4809 * STA exceeds the maximum idle inactive time, the AP will send an
4810 * 802.11 data-null as a keep alive to verify the STA is still
4811 * associated. If the STA does ACK the data-null, or if the data-null
4812 * is buffered and the STA does not retrieve it, the STA will be
4813 * considered unresponsive
4814 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
4816 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
4819 * An associated STA is considered unresponsive if there is no recent
4820 * TX/RX activity and downlink frames are buffered for it. Once a STA
4821 * exceeds the maximum unresponsive time, the AP will send a
4822 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. */
4823 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
4825 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
4826 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
4828 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
4829 /* Enable/Disable RTS-CTS */
4830 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
4832 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
4834 /* following are available as of firmware 10.2 */
4835 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
4836 WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
4837 WMI_10X_VDEV_PARAM_MFPTEST_SET,
4838 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
4839 WMI_10X_VDEV_PARAM_VHT_SGIMASK,
4840 WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
4843 enum wmi_10_4_vdev_param {
4844 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
4845 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
4846 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
4847 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
4848 WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
4849 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
4850 WMI_10_4_VDEV_PARAM_SLOT_TIME,
4851 WMI_10_4_VDEV_PARAM_PREAMBLE,
4852 WMI_10_4_VDEV_PARAM_SWBA_TIME,
4853 WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
4854 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
4855 WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
4856 WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
4857 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
4858 WMI_10_4_VDEV_PARAM_WDS,
4859 WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
4860 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
4861 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
4862 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
4863 WMI_10_4_VDEV_PARAM_FEATURE_WMM,
4864 WMI_10_4_VDEV_PARAM_CHWIDTH,
4865 WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
4866 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
4867 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
4868 WMI_10_4_VDEV_PARAM_MGMT_RATE,
4869 WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
4870 WMI_10_4_VDEV_PARAM_FIXED_RATE,
4871 WMI_10_4_VDEV_PARAM_SGI,
4872 WMI_10_4_VDEV_PARAM_LDPC,
4873 WMI_10_4_VDEV_PARAM_TX_STBC,
4874 WMI_10_4_VDEV_PARAM_RX_STBC,
4875 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
4876 WMI_10_4_VDEV_PARAM_DEF_KEYID,
4877 WMI_10_4_VDEV_PARAM_NSS,
4878 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
4879 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
4880 WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
4881 WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
4882 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
4883 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
4884 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
4885 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
4886 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
4887 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
4888 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
4889 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
4890 WMI_10_4_VDEV_PARAM_TXBF,
4891 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
4892 WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
4893 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
4894 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
4895 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
4896 WMI_10_4_VDEV_PARAM_MFPTEST_SET,
4897 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
4898 WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
4899 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
4900 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
4901 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
4902 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
4903 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
4904 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
4905 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
4906 WMI_10_4_VDEV_PARAM_PROXY_STA,
4907 WMI_10_4_VDEV_PARAM_MERU_VC,
4908 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
4909 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
4912 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
4913 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
4914 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
4915 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
4917 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4
4918 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0xf0
4919 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8
4920 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00
4922 /* slot time long */
4923 #define WMI_VDEV_SLOT_TIME_LONG 0x1
4924 /* slot time short */
4925 #define WMI_VDEV_SLOT_TIME_SHORT 0x2
4927 #define WMI_VDEV_PREAMBLE_LONG 0x1
4928 /* preablbe short */
4929 #define WMI_VDEV_PREAMBLE_SHORT 0x2
4931 enum wmi_start_event_param {
4932 WMI_VDEV_RESP_START_EVENT = 0,
4933 WMI_VDEV_RESP_RESTART_EVENT,
4936 struct wmi_vdev_start_response_event {
4939 __le32 resp_type; /* %WMI_VDEV_RESP_ */
4943 struct wmi_vdev_standby_req_event {
4944 /* unique id identifying the VDEV, generated by the caller */
4948 struct wmi_vdev_resume_req_event {
4949 /* unique id identifying the VDEV, generated by the caller */
4953 struct wmi_vdev_stopped_event {
4954 /* unique id identifying the VDEV, generated by the caller */
4959 * common structure used for simple events
4960 * (stopped, resume_req, standby response)
4962 struct wmi_vdev_simple_event {
4963 /* unique id identifying the VDEV, generated by the caller */
4967 /* VDEV start response status codes */
4968 /* VDEV succesfully started */
4969 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0
4971 /* requested VDEV not found */
4972 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1
4974 /* unsupported VDEV combination */
4975 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2
4977 /* TODO: please add more comments if you have in-depth information */
4978 struct wmi_vdev_spectral_conf_cmd {
4981 /* number of fft samples to send (0 for infinite) */
4984 __le32 scan_priority;
4986 /* number of bins in the FFT: 2^(fft_size - bin_scale) */
4987 __le32 scan_fft_size;
4989 __le32 scan_restart_ena;
4990 __le32 scan_noise_floor_ref;
4991 __le32 scan_init_delay;
4992 __le32 scan_nb_tone_thr;
4993 __le32 scan_str_bin_thr;
4994 __le32 scan_wb_rpt_mode;
4995 __le32 scan_rssi_rpt_mode;
4996 __le32 scan_rssi_thr;
4997 __le32 scan_pwr_format;
4999 /* rpt_mode: Format of FFT report to software for spectral scan
5001 * 0: No FFT report (only spectral scan summary report)
5002 * 1: 2-dword summary of metrics for each completed FFT + spectral
5003 * scan summary report
5004 * 2: 2-dword summary of metrics for each completed FFT +
5005 * 1x- oversampled bins(in-band) per FFT + spectral scan summary
5007 * 3: 2-dword summary of metrics for each completed FFT +
5008 * 2x- oversampled bins (all) per FFT + spectral scan summary
5010 __le32 scan_rpt_mode;
5011 __le32 scan_bin_scale;
5012 __le32 scan_dbm_adj;
5013 __le32 scan_chn_mask;
5016 struct wmi_vdev_spectral_conf_arg {
5023 u32 scan_restart_ena;
5024 u32 scan_noise_floor_ref;
5025 u32 scan_init_delay;
5026 u32 scan_nb_tone_thr;
5027 u32 scan_str_bin_thr;
5028 u32 scan_wb_rpt_mode;
5029 u32 scan_rssi_rpt_mode;
5031 u32 scan_pwr_format;
5038 #define WMI_SPECTRAL_ENABLE_DEFAULT 0
5039 #define WMI_SPECTRAL_COUNT_DEFAULT 0
5040 #define WMI_SPECTRAL_PERIOD_DEFAULT 35
5041 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1
5042 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7
5043 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1
5044 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0
5045 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96
5046 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80
5047 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12
5048 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8
5049 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0
5050 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0
5051 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0
5052 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0
5053 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2
5054 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1
5055 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1
5056 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1
5058 struct wmi_vdev_spectral_enable_cmd {
5064 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1
5065 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2
5066 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1
5067 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2
5069 /* Beacon processing related command and event structures */
5070 struct wmi_bcn_tx_hdr {
5077 struct wmi_bcn_tx_cmd {
5078 struct wmi_bcn_tx_hdr hdr;
5082 struct wmi_bcn_tx_arg {
5090 enum wmi_bcn_tx_ref_flags {
5091 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5092 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5095 /* TODO: It is unclear why "no antenna" works while any other seemingly valid
5096 * chainmask yields no beacons on the air at all.
5098 #define WMI_BCN_TX_REF_DEF_ANTENNA 0
5100 struct wmi_bcn_tx_ref_cmd {
5103 /* physical address of the frame - dma pointer */
5105 /* id for host to track */
5107 /* frame ctrl to setup PPDU desc */
5108 __le32 frame_control;
5109 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5111 /* introduced in 10.2 */
5112 __le32 antenna_mask;
5116 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */
5117 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */
5118 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */
5119 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5120 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */
5122 struct wmi_bcn_filter_rx_cmd {
5124 __le32 bcn_filter_id;
5125 /* Filter type - wmi_bcn_filter */
5128 __le32 bcn_filter_len;
5129 /* Filter info (threshold, BSSID, RSSI) */
5133 /* Capabilities and IEs to be passed to firmware */
5134 struct wmi_bcn_prb_info {
5139 /* Advanced capabilities */
5140 /* HT capabilities */
5150 struct wmi_bcn_tmpl_cmd {
5151 /* unique id identifying the VDEV, generated by the caller */
5153 /* TIM IE offset from the beginning of the template. */
5154 __le32 tim_ie_offset;
5155 /* beacon probe capabilities and IEs */
5156 struct wmi_bcn_prb_info bcn_prb_info;
5157 /* beacon buffer length */
5159 /* variable length data */
5163 struct wmi_prb_tmpl_cmd {
5164 /* unique id identifying the VDEV, generated by the caller */
5166 /* beacon probe capabilities and IEs */
5167 struct wmi_bcn_prb_info bcn_prb_info;
5168 /* beacon buffer length */
5170 /* Variable length data */
5174 enum wmi_sta_ps_mode {
5175 /* enable power save for the given STA VDEV */
5176 WMI_STA_PS_MODE_DISABLED = 0,
5177 /* disable power save for a given STA VDEV */
5178 WMI_STA_PS_MODE_ENABLED = 1,
5181 struct wmi_sta_powersave_mode_cmd {
5182 /* unique id identifying the VDEV, generated by the caller */
5187 * (see enum wmi_sta_ps_mode)
5192 enum wmi_csa_offload_en {
5193 WMI_CSA_OFFLOAD_DISABLE = 0,
5194 WMI_CSA_OFFLOAD_ENABLE = 1,
5197 struct wmi_csa_offload_enable_cmd {
5199 __le32 csa_offload_enable;
5202 struct wmi_csa_offload_chanswitch_cmd {
5204 struct wmi_channel chan;
5208 * This parameter controls the policy for retrieving frames from AP while the
5209 * STA is in sleep state.
5211 * Only takes affect if the sta_ps_mode is enabled
5213 enum wmi_sta_ps_param_rx_wake_policy {
5215 * Wake up when ever there is an RX activity on the VDEV. In this mode
5216 * the Power save SM(state machine) will come out of sleep by either
5217 * sending null frame (or) a data frame (with PS==0) in response to TIM
5218 * bit set in the received beacon frame from AP.
5220 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5223 * Here the power save state machine will not wakeup in response to TIM
5224 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5225 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all
5226 * access categories are delivery-enabled, the station will send a
5227 * UAPSD trigger frame, otherwise it will send a PS-Poll.
5229 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5233 * Number of tx frames/beacon that cause the power save SM to wake up.
5235 * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5236 * meaning, It will cause the SM to never wake up. This is useful if you want
5237 * to keep the system to sleep all the time for some kind of test mode . host
5238 * can change this parameter any time. It will affect at the next tx frame.
5240 enum wmi_sta_ps_param_tx_wake_threshold {
5241 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5242 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5245 * Values greater than one indicate that many TX attempts per beacon
5246 * interval before the STA will wake up
5251 * The maximum number of PS-Poll frames the FW will send in response to
5252 * traffic advertised in TIM before waking up (by sending a null frame with PS
5253 * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5254 * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5255 * parameter is used when the RX wake policy is
5256 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5257 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5259 enum wmi_sta_ps_param_pspoll_count {
5260 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5262 * Values greater than 0 indicate the maximum numer of PS-Poll frames
5263 * FW will send before waking up.
5266 /* When u-APSD is enabled the firmware will be very reluctant to exit
5267 * STA PS. This could result in very poor Rx performance with STA doing
5268 * PS-Poll for each and every buffered frame. This value is a bit
5271 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5275 * This will include the delivery and trigger enabled state for every AC.
5276 * This is the negotiated state with AP. The host MLME needs to set this based
5277 * on AP capability and the state Set in the association request by the
5278 * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5280 #define WMI_UAPSD_AC_TYPE_DELI 0
5281 #define WMI_UAPSD_AC_TYPE_TRIG 1
5283 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5284 ((type == WMI_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) : (1<<((ac<<1)+1)))
5286 enum wmi_sta_ps_param_uapsd {
5287 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5288 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
5289 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5290 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
5291 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5292 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
5293 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5294 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
5297 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5299 struct wmi_sta_uapsd_auto_trig_param {
5301 __le32 user_priority;
5302 __le32 service_interval;
5303 __le32 suspend_interval;
5304 __le32 delay_interval;
5307 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5309 struct wmi_mac_addr peer_macaddr;
5313 struct wmi_sta_uapsd_auto_trig_arg {
5316 u32 service_interval;
5317 u32 suspend_interval;
5321 enum wmi_sta_powersave_param {
5323 * Controls how frames are retrievd from AP while STA is sleeping
5325 * (see enum wmi_sta_ps_param_rx_wake_policy)
5327 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5330 * The STA will go active after this many TX
5332 * (see enum wmi_sta_ps_param_tx_wake_threshold)
5334 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5337 * Number of PS-Poll to send before STA wakes up
5339 * (see enum wmi_sta_ps_param_pspoll_count)
5342 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5345 * TX/RX inactivity time in msec before going to sleep.
5347 * The power save SM will monitor tx/rx activity on the VDEV, if no
5348 * activity for the specified msec of the parameter the Power save
5349 * SM will go to sleep.
5351 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
5354 * Set uapsd configuration.
5356 * (see enum wmi_sta_ps_param_uapsd)
5358 WMI_STA_PS_PARAM_UAPSD = 4,
5361 struct wmi_sta_powersave_param_cmd {
5363 __le32 param_id; /* %WMI_STA_PS_PARAM_ */
5367 /* No MIMO power save */
5368 #define WMI_STA_MIMO_PS_MODE_DISABLE
5369 /* mimo powersave mode static*/
5370 #define WMI_STA_MIMO_PS_MODE_STATIC
5371 /* mimo powersave mode dynamic */
5372 #define WMI_STA_MIMO_PS_MODE_DYNAMIC
5374 struct wmi_sta_mimo_ps_mode_cmd {
5375 /* unique id identifying the VDEV, generated by the caller */
5377 /* mimo powersave mode as defined above */
5378 __le32 mimo_pwrsave_mode;
5381 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */
5382 enum wmi_ap_ps_param_uapsd {
5383 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5384 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
5385 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5386 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
5387 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5388 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
5389 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5390 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
5393 /* U-APSD maximum service period of peer station */
5394 enum wmi_ap_ps_peer_param_max_sp {
5395 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
5396 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
5397 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
5398 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
5399 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
5403 * AP power save parameter
5404 * Set a power save specific parameter for a peer station
5406 enum wmi_ap_ps_peer_param {
5407 /* Set uapsd configuration for a given peer.
5409 * Include the delivery and trigger enabled state for every AC.
5410 * The host MLME needs to set this based on AP capability and stations
5411 * request Set in the association request received from the station.
5413 * Lower 8 bits of the value specify the UAPSD configuration.
5415 * (see enum wmi_ap_ps_param_uapsd)
5416 * The default value is 0.
5418 WMI_AP_PS_PEER_PARAM_UAPSD = 0,
5421 * Set the service period for a UAPSD capable station
5423 * The service period from wme ie in the (re)assoc request frame.
5425 * (see enum wmi_ap_ps_peer_param_max_sp)
5427 WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
5429 /* Time in seconds for aging out buffered frames for STA in PS */
5430 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
5433 struct wmi_ap_ps_peer_cmd {
5434 /* unique id identifying the VDEV, generated by the caller */
5437 /* peer MAC address */
5438 struct wmi_mac_addr peer_macaddr;
5440 /* AP powersave param (see enum wmi_ap_ps_peer_param) */
5443 /* AP powersave param value */
5447 /* 128 clients = 4 words */
5448 #define WMI_TIM_BITMAP_ARRAY_SIZE 4
5450 struct wmi_tim_info {
5453 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
5455 __le32 tim_num_ps_pending;
5458 struct wmi_tim_info_arg {
5461 const __le32 *tim_bitmap;
5463 __le32 tim_num_ps_pending;
5466 /* Maximum number of NOA Descriptors supported */
5467 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4
5468 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0)
5469 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1
5470 #define WMI_P2P_NOA_CHANGED_BIT BIT(0)
5472 struct wmi_p2p_noa_info {
5473 /* Bit 0 - Flag to indicate an update in NOA schedule
5474 Bits 7-1 - Reserved */
5478 /* Bit 0 - Opp PS state of the AP
5479 Bits 1-7 - Ctwindow in TUs */
5481 /* Number of NOA descriptors */
5484 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
5487 struct wmi_bcn_info {
5488 struct wmi_tim_info tim_info;
5489 struct wmi_p2p_noa_info p2p_noa_info;
5492 struct wmi_host_swba_event {
5494 struct wmi_bcn_info bcn_info[0];
5497 struct wmi_10_2_4_bcn_info {
5498 struct wmi_tim_info tim_info;
5499 /* The 10.2.4 FW doesn't have p2p NOA info */
5502 struct wmi_10_2_4_host_swba_event {
5504 struct wmi_10_2_4_bcn_info bcn_info[0];
5507 /* 16 words = 512 client + 1 word = for guard */
5508 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
5510 struct wmi_10_4_tim_info {
5513 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
5515 __le32 tim_num_ps_pending;
5518 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
5520 struct wmi_10_4_p2p_noa_info {
5521 /* Bit 0 - Flag to indicate an update in NOA schedule
5522 * Bits 7-1 - Reserved
5527 /* Bit 0 - Opp PS state of the AP
5528 * Bits 1-7 - Ctwindow in TUs
5531 /* Number of NOA descriptors */
5534 struct wmi_p2p_noa_descriptor
5535 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
5538 struct wmi_10_4_bcn_info {
5539 struct wmi_10_4_tim_info tim_info;
5540 struct wmi_10_4_p2p_noa_info p2p_noa_info;
5543 struct wmi_10_4_host_swba_event {
5545 struct wmi_10_4_bcn_info bcn_info[0];
5548 #define WMI_MAX_AP_VDEV 16
5550 struct wmi_tbtt_offset_event {
5552 __le32 tbttoffset_list[WMI_MAX_AP_VDEV];
5555 struct wmi_peer_create_cmd {
5557 struct wmi_mac_addr peer_macaddr;
5560 enum wmi_peer_type {
5561 WMI_PEER_TYPE_DEFAULT = 0,
5562 WMI_PEER_TYPE_BSS = 1,
5563 WMI_PEER_TYPE_TDLS = 2,
5566 struct wmi_peer_delete_cmd {
5568 struct wmi_mac_addr peer_macaddr;
5571 struct wmi_peer_flush_tids_cmd {
5573 struct wmi_mac_addr peer_macaddr;
5574 __le32 peer_tid_bitmap;
5577 struct wmi_fixed_rate {
5579 * rate mode . 0: disable fixed rate (auto rate)
5580 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps
5581 * 2: ht20 11n rate specified as mcs index
5582 * 3: ht40 11n rate specified as mcs index
5586 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
5587 * and series 3 is stored at byte 3 (MSB)
5591 * 4 retry counts for 4 rate series. retry count for rate 0 is stored
5592 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
5595 __le32 rate_retries;
5598 struct wmi_peer_fixed_rate_cmd {
5599 /* unique id identifying the VDEV, generated by the caller */
5601 /* peer MAC address */
5602 struct wmi_mac_addr peer_macaddr;
5604 struct wmi_fixed_rate peer_fixed_rate;
5607 #define WMI_MGMT_TID 17
5609 struct wmi_addba_clear_resp_cmd {
5610 /* unique id identifying the VDEV, generated by the caller */
5612 /* peer MAC address */
5613 struct wmi_mac_addr peer_macaddr;
5616 struct wmi_addba_send_cmd {
5617 /* unique id identifying the VDEV, generated by the caller */
5619 /* peer MAC address */
5620 struct wmi_mac_addr peer_macaddr;
5623 /* Buffer/Window size*/
5627 struct wmi_delba_send_cmd {
5628 /* unique id identifying the VDEV, generated by the caller */
5630 /* peer MAC address */
5631 struct wmi_mac_addr peer_macaddr;
5640 struct wmi_addba_setresponse_cmd {
5641 /* unique id identifying the vdev, generated by the caller */
5643 /* peer mac address */
5644 struct wmi_mac_addr peer_macaddr;
5651 struct wmi_send_singleamsdu_cmd {
5652 /* unique id identifying the vdev, generated by the caller */
5654 /* peer mac address */
5655 struct wmi_mac_addr peer_macaddr;
5660 enum wmi_peer_smps_state {
5661 WMI_PEER_SMPS_PS_NONE = 0x0,
5662 WMI_PEER_SMPS_STATIC = 0x1,
5663 WMI_PEER_SMPS_DYNAMIC = 0x2
5666 enum wmi_peer_chwidth {
5667 WMI_PEER_CHWIDTH_20MHZ = 0,
5668 WMI_PEER_CHWIDTH_40MHZ = 1,
5669 WMI_PEER_CHWIDTH_80MHZ = 2,
5672 enum wmi_peer_param {
5673 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
5674 WMI_PEER_AMPDU = 0x2,
5675 WMI_PEER_AUTHORIZE = 0x3,
5676 WMI_PEER_CHAN_WIDTH = 0x4,
5678 WMI_PEER_USE_4ADDR = 0x6,
5679 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */
5682 struct wmi_peer_set_param_cmd {
5684 struct wmi_mac_addr peer_macaddr;
5689 #define MAX_SUPPORTED_RATES 128
5691 struct wmi_rate_set {
5692 /* total number of rates */
5695 * rates (each 8bit value) packed into a 32 bit word.
5696 * the rates are filled from least significant byte to most
5699 __le32 rates[(MAX_SUPPORTED_RATES/4)+1];
5702 struct wmi_rate_set_arg {
5703 unsigned int num_rates;
5704 u8 rates[MAX_SUPPORTED_RATES];
5708 * NOTE: It would bea good idea to represent the Tx MCS
5709 * info in one word and Rx in another word. This is split
5710 * into multiple words for convenience
5712 struct wmi_vht_rate_set {
5713 __le32 rx_max_rate; /* Max Rx data rate */
5714 __le32 rx_mcs_set; /* Negotiated RX VHT rates */
5715 __le32 tx_max_rate; /* Max Tx data rate */
5716 __le32 tx_mcs_set; /* Negotiated TX VHT rates */
5719 struct wmi_vht_rate_set_arg {
5726 struct wmi_peer_set_rates_cmd {
5727 /* peer MAC address */
5728 struct wmi_mac_addr peer_macaddr;
5729 /* legacy rate set */
5730 struct wmi_rate_set peer_legacy_rates;
5732 struct wmi_rate_set peer_ht_rates;
5735 struct wmi_peer_set_q_empty_callback_cmd {
5736 /* unique id identifying the VDEV, generated by the caller */
5738 /* peer MAC address */
5739 struct wmi_mac_addr peer_macaddr;
5740 __le32 callback_enable;
5743 struct wmi_peer_flags_map {
5762 enum wmi_peer_flags {
5763 WMI_PEER_AUTH = 0x00000001,
5764 WMI_PEER_QOS = 0x00000002,
5765 WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
5766 WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
5767 WMI_PEER_APSD = 0x00000800,
5768 WMI_PEER_HT = 0x00001000,
5769 WMI_PEER_40MHZ = 0x00002000,
5770 WMI_PEER_STBC = 0x00008000,
5771 WMI_PEER_LDPC = 0x00010000,
5772 WMI_PEER_DYN_MIMOPS = 0x00020000,
5773 WMI_PEER_STATIC_MIMOPS = 0x00040000,
5774 WMI_PEER_SPATIAL_MUX = 0x00200000,
5775 WMI_PEER_VHT = 0x02000000,
5776 WMI_PEER_80MHZ = 0x04000000,
5777 WMI_PEER_VHT_2G = 0x08000000,
5778 WMI_PEER_PMF = 0x10000000,
5781 enum wmi_10x_peer_flags {
5782 WMI_10X_PEER_AUTH = 0x00000001,
5783 WMI_10X_PEER_QOS = 0x00000002,
5784 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
5785 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
5786 WMI_10X_PEER_APSD = 0x00000800,
5787 WMI_10X_PEER_HT = 0x00001000,
5788 WMI_10X_PEER_40MHZ = 0x00002000,
5789 WMI_10X_PEER_STBC = 0x00008000,
5790 WMI_10X_PEER_LDPC = 0x00010000,
5791 WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
5792 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
5793 WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
5794 WMI_10X_PEER_VHT = 0x02000000,
5795 WMI_10X_PEER_80MHZ = 0x04000000,
5798 enum wmi_10_2_peer_flags {
5799 WMI_10_2_PEER_AUTH = 0x00000001,
5800 WMI_10_2_PEER_QOS = 0x00000002,
5801 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
5802 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
5803 WMI_10_2_PEER_APSD = 0x00000800,
5804 WMI_10_2_PEER_HT = 0x00001000,
5805 WMI_10_2_PEER_40MHZ = 0x00002000,
5806 WMI_10_2_PEER_STBC = 0x00008000,
5807 WMI_10_2_PEER_LDPC = 0x00010000,
5808 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
5809 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
5810 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
5811 WMI_10_2_PEER_VHT = 0x02000000,
5812 WMI_10_2_PEER_80MHZ = 0x04000000,
5813 WMI_10_2_PEER_VHT_2G = 0x08000000,
5814 WMI_10_2_PEER_PMF = 0x10000000,
5818 * Peer rate capabilities.
5820 * This is of interest to the ratecontrol
5821 * module which resides in the firmware. The bit definitions are
5822 * consistent with that defined in if_athrate.c.
5824 #define WMI_RC_DS_FLAG 0x01
5825 #define WMI_RC_CW40_FLAG 0x02
5826 #define WMI_RC_SGI_FLAG 0x04
5827 #define WMI_RC_HT_FLAG 0x08
5828 #define WMI_RC_RTSCTS_FLAG 0x10
5829 #define WMI_RC_TX_STBC_FLAG 0x20
5830 #define WMI_RC_RX_STBC_FLAG 0xC0
5831 #define WMI_RC_RX_STBC_FLAG_S 6
5832 #define WMI_RC_WEP_TKIP_FLAG 0x100
5833 #define WMI_RC_TS_FLAG 0x200
5834 #define WMI_RC_UAPSD_FLAG 0x400
5836 /* Maximum listen interval supported by hw in units of beacon interval */
5837 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5
5839 struct wmi_common_peer_assoc_complete_cmd {
5840 struct wmi_mac_addr peer_macaddr;
5842 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
5843 __le32 peer_associd; /* 16 LSBs */
5845 __le32 peer_caps; /* 16 LSBs */
5846 __le32 peer_listen_intval;
5847 __le32 peer_ht_caps;
5848 __le32 peer_max_mpdu;
5849 __le32 peer_mpdu_density; /* 0..16 */
5850 __le32 peer_rate_caps;
5851 struct wmi_rate_set peer_legacy_rates;
5852 struct wmi_rate_set peer_ht_rates;
5853 __le32 peer_nss; /* num of spatial streams */
5854 __le32 peer_vht_caps;
5855 __le32 peer_phymode;
5856 struct wmi_vht_rate_set peer_vht_rates;
5859 struct wmi_main_peer_assoc_complete_cmd {
5860 struct wmi_common_peer_assoc_complete_cmd cmd;
5862 /* HT Operation Element of the peer. Five bytes packed in 2
5863 * INT32 array and filled from lsb to msb. */
5864 __le32 peer_ht_info[2];
5867 struct wmi_10_1_peer_assoc_complete_cmd {
5868 struct wmi_common_peer_assoc_complete_cmd cmd;
5871 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
5872 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
5873 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
5874 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
5876 struct wmi_10_2_peer_assoc_complete_cmd {
5877 struct wmi_common_peer_assoc_complete_cmd cmd;
5878 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
5881 struct wmi_10_4_peer_assoc_complete_cmd {
5882 struct wmi_10_2_peer_assoc_complete_cmd cmd;
5883 __le32 peer_bw_rxnss_override;
5886 struct wmi_peer_assoc_complete_arg {
5891 u32 peer_flags; /* see %WMI_PEER_ */
5893 u32 peer_listen_intval;
5896 u32 peer_mpdu_density; /* 0..16 */
5897 u32 peer_rate_caps; /* see %WMI_RC_ */
5898 struct wmi_rate_set_arg peer_legacy_rates;
5899 struct wmi_rate_set_arg peer_ht_rates;
5900 u32 peer_num_spatial_streams;
5902 enum wmi_phy_mode peer_phymode;
5903 struct wmi_vht_rate_set_arg peer_vht_rates;
5906 struct wmi_peer_add_wds_entry_cmd {
5907 /* peer MAC address */
5908 struct wmi_mac_addr peer_macaddr;
5910 struct wmi_mac_addr wds_macaddr;
5913 struct wmi_peer_remove_wds_entry_cmd {
5915 struct wmi_mac_addr wds_macaddr;
5918 struct wmi_peer_q_empty_callback_event {
5919 /* peer MAC address */
5920 struct wmi_mac_addr peer_macaddr;
5924 * Channel info WMI event
5926 struct wmi_chan_info_event {
5931 __le32 rx_clear_count;
5935 struct wmi_10_4_chan_info_event {
5940 __le32 rx_clear_count;
5942 __le32 chan_tx_pwr_range;
5943 __le32 chan_tx_pwr_tp;
5944 __le32 rx_frame_count;
5947 struct wmi_peer_sta_kickout_event {
5948 struct wmi_mac_addr peer_macaddr;
5951 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
5952 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
5954 /* Beacon filter wmi command info */
5955 #define BCN_FLT_MAX_SUPPORTED_IES 256
5956 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32)
5958 struct bss_bcn_stats {
5960 __le32 bss_bcnsdropped;
5961 __le32 bss_bcnsdelivered;
5964 struct bcn_filter_stats {
5965 __le32 bcns_dropped;
5966 __le32 bcns_delivered;
5967 __le32 activefilters;
5968 struct bss_bcn_stats bss_stats;
5971 struct wmi_add_bcn_filter_cmd {
5973 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
5976 enum wmi_sta_keepalive_method {
5977 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
5978 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
5981 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
5983 /* Firmware crashes if keepalive interval exceeds this limit */
5984 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
5986 /* note: ip4 addresses are in network byte order, i.e. big endian */
5987 struct wmi_sta_keepalive_arp_resp {
5988 __be32 src_ip4_addr;
5989 __be32 dest_ip4_addr;
5990 struct wmi_mac_addr dest_mac_addr;
5993 struct wmi_sta_keepalive_cmd {
5996 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
5997 __le32 interval; /* in seconds */
5998 struct wmi_sta_keepalive_arp_resp arp_resp;
6001 struct wmi_sta_keepalive_arg {
6006 __be32 src_ip4_addr;
6007 __be32 dest_ip4_addr;
6008 const u8 dest_mac_addr[ETH_ALEN];
6011 enum wmi_force_fw_hang_type {
6012 WMI_FORCE_FW_HANG_ASSERT = 1,
6013 WMI_FORCE_FW_HANG_NO_DETECT,
6014 WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6015 WMI_FORCE_FW_HANG_EMPTY_POINT,
6016 WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6017 WMI_FORCE_FW_HANG_INFINITE_LOOP,
6020 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6022 struct wmi_force_fw_hang_cmd {
6027 enum ath10k_dbglog_level {
6028 ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
6029 ATH10K_DBGLOG_LEVEL_INFO = 1,
6030 ATH10K_DBGLOG_LEVEL_WARN = 2,
6031 ATH10K_DBGLOG_LEVEL_ERR = 3,
6034 /* VAP ids to enable dbglog */
6035 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0
6036 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff
6038 /* to enable dbglog in the firmware */
6039 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16
6040 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
6042 /* timestamp resolution */
6043 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17
6044 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000
6046 /* number of queued messages before sending them to the host */
6047 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20
6048 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000
6051 * Log levels to enable. This defines the minimum level to enable, this is
6052 * not a bitmask. See enum ath10k_dbglog_level for the values.
6054 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28
6055 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000
6058 * Note: this is a cleaned up version of a struct firmware uses. For
6059 * example, config_valid was hidden inside an array.
6061 struct wmi_dbglog_cfg_cmd {
6062 /* bitmask to hold mod id config*/
6063 __le32 module_enable;
6065 /* see ATH10K_DBGLOG_CFG_ */
6066 __le32 config_enable;
6068 /* mask of module id bits to be changed */
6069 __le32 module_valid;
6071 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6072 __le32 config_valid;
6075 enum wmi_roam_reason {
6076 WMI_ROAM_REASON_BETTER_AP = 1,
6077 WMI_ROAM_REASON_BEACON_MISS = 2,
6078 WMI_ROAM_REASON_LOW_RSSI = 3,
6079 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
6080 WMI_ROAM_REASON_HO_FAILED = 5,
6083 WMI_ROAM_REASON_MAX,
6086 struct wmi_roam_ev {
6091 #define ATH10K_FRAGMT_THRESHOLD_MIN 540
6092 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346
6094 #define WMI_MAX_EVENT 0x1000
6095 /* Maximum number of pending TXed WMI packets */
6096 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6098 /* By default disable power save for IBSS */
6099 #define ATH10K_DEFAULT_ATIM 0
6101 #define WMI_MAX_MEM_REQS 16
6103 struct wmi_scan_ev_arg {
6104 __le32 event_type; /* %WMI_SCAN_EVENT_ */
6105 __le32 reason; /* %WMI_SCAN_REASON_ */
6106 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
6112 struct wmi_mgmt_rx_ev_arg {
6118 __le32 status; /* %WMI_RX_STATUS_ */
6121 struct wmi_ch_info_ev_arg {
6126 __le32 rx_clear_count;
6128 __le32 chan_tx_pwr_range;
6129 __le32 chan_tx_pwr_tp;
6130 __le32 rx_frame_count;
6133 struct wmi_vdev_start_ev_arg {
6136 __le32 resp_type; /* %WMI_VDEV_RESP_ */
6140 struct wmi_peer_kick_ev_arg {
6144 struct wmi_swba_ev_arg {
6146 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
6147 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
6150 struct wmi_phyerr_ev_arg {
6163 struct wmi_phyerr_hdr_arg {
6168 const void *phyerrs;
6171 struct wmi_svc_rdy_ev_arg {
6172 __le32 min_tx_power;
6173 __le32 max_tx_power;
6180 __le32 num_rf_chains;
6182 __le32 num_mem_reqs;
6183 const __le32 *service_map;
6184 size_t service_map_len;
6185 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6188 struct wmi_rdy_ev_arg {
6195 struct wmi_roam_ev_arg {
6201 struct wmi_pdev_temperature_event {
6202 /* temperature value in Celcius degree */
6206 /* WOW structures */
6207 enum wmi_wow_wakeup_event {
6208 WOW_BMISS_EVENT = 0,
6209 WOW_BETTER_AP_EVENT,
6210 WOW_DEAUTH_RECVD_EVENT,
6211 WOW_MAGIC_PKT_RECVD_EVENT,
6213 WOW_FOURWAY_HSHAKE_EVENT,
6214 WOW_EAPOL_RECVD_EVENT,
6215 WOW_NLO_DETECTED_EVENT,
6216 WOW_DISASSOC_RECVD_EVENT,
6217 WOW_PATTERN_MATCH_EVENT,
6219 WOW_PROBE_REQ_WPS_IE_EVENT,
6221 WOW_ASSOC_REQ_EVENT,
6224 WOW_HOST_AUTO_SHUTDOWN_EVENT,
6225 WOW_IOAC_MAGIC_EVENT,
6226 WOW_IOAC_SHORT_EVENT,
6227 WOW_IOAC_EXTEND_EVENT,
6228 WOW_IOAC_TIMER_EVENT,
6229 WOW_DFS_PHYERR_RADAR_EVENT,
6231 WOW_CLIENT_KICKOUT_EVENT,
6235 #define C2S(x) case x: return #x
6237 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
6240 C2S(WOW_BMISS_EVENT);
6241 C2S(WOW_BETTER_AP_EVENT);
6242 C2S(WOW_DEAUTH_RECVD_EVENT);
6243 C2S(WOW_MAGIC_PKT_RECVD_EVENT);
6244 C2S(WOW_GTK_ERR_EVENT);
6245 C2S(WOW_FOURWAY_HSHAKE_EVENT);
6246 C2S(WOW_EAPOL_RECVD_EVENT);
6247 C2S(WOW_NLO_DETECTED_EVENT);
6248 C2S(WOW_DISASSOC_RECVD_EVENT);
6249 C2S(WOW_PATTERN_MATCH_EVENT);
6250 C2S(WOW_CSA_IE_EVENT);
6251 C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
6252 C2S(WOW_AUTH_REQ_EVENT);
6253 C2S(WOW_ASSOC_REQ_EVENT);
6255 C2S(WOW_RA_MATCH_EVENT);
6256 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
6257 C2S(WOW_IOAC_MAGIC_EVENT);
6258 C2S(WOW_IOAC_SHORT_EVENT);
6259 C2S(WOW_IOAC_EXTEND_EVENT);
6260 C2S(WOW_IOAC_TIMER_EVENT);
6261 C2S(WOW_DFS_PHYERR_RADAR_EVENT);
6262 C2S(WOW_BEACON_EVENT);
6263 C2S(WOW_CLIENT_KICKOUT_EVENT);
6270 enum wmi_wow_wake_reason {
6271 WOW_REASON_UNSPECIFIED = -1,
6272 WOW_REASON_NLOD = 0,
6273 WOW_REASON_AP_ASSOC_LOST,
6274 WOW_REASON_LOW_RSSI,
6275 WOW_REASON_DEAUTH_RECVD,
6276 WOW_REASON_DISASSOC_RECVD,
6277 WOW_REASON_GTK_HS_ERR,
6279 WOW_REASON_FOURWAY_HS_RECV,
6280 WOW_REASON_TIMER_INTR_RECV,
6281 WOW_REASON_PATTERN_MATCH_FOUND,
6282 WOW_REASON_RECV_MAGIC_PATTERN,
6283 WOW_REASON_P2P_DISC,
6285 WOW_REASON_CSA_EVENT,
6286 WOW_REASON_PROBE_REQ_WPS_IE_RECV,
6287 WOW_REASON_AUTH_REQ_RECV,
6288 WOW_REASON_ASSOC_REQ_RECV,
6289 WOW_REASON_HTT_EVENT,
6290 WOW_REASON_RA_MATCH,
6291 WOW_REASON_HOST_AUTO_SHUTDOWN,
6292 WOW_REASON_IOAC_MAGIC_EVENT,
6293 WOW_REASON_IOAC_SHORT_EVENT,
6294 WOW_REASON_IOAC_EXTEND_EVENT,
6295 WOW_REASON_IOAC_TIMER_EVENT,
6297 WOW_REASON_DFS_PHYERR_RADADR_EVENT,
6298 WOW_REASON_BEACON_RECV,
6299 WOW_REASON_CLIENT_KICKOUT_EVENT,
6300 WOW_REASON_DEBUG_TEST = 0xFF,
6303 static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
6306 C2S(WOW_REASON_UNSPECIFIED);
6307 C2S(WOW_REASON_NLOD);
6308 C2S(WOW_REASON_AP_ASSOC_LOST);
6309 C2S(WOW_REASON_LOW_RSSI);
6310 C2S(WOW_REASON_DEAUTH_RECVD);
6311 C2S(WOW_REASON_DISASSOC_RECVD);
6312 C2S(WOW_REASON_GTK_HS_ERR);
6313 C2S(WOW_REASON_EAP_REQ);
6314 C2S(WOW_REASON_FOURWAY_HS_RECV);
6315 C2S(WOW_REASON_TIMER_INTR_RECV);
6316 C2S(WOW_REASON_PATTERN_MATCH_FOUND);
6317 C2S(WOW_REASON_RECV_MAGIC_PATTERN);
6318 C2S(WOW_REASON_P2P_DISC);
6319 C2S(WOW_REASON_WLAN_HB);
6320 C2S(WOW_REASON_CSA_EVENT);
6321 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
6322 C2S(WOW_REASON_AUTH_REQ_RECV);
6323 C2S(WOW_REASON_ASSOC_REQ_RECV);
6324 C2S(WOW_REASON_HTT_EVENT);
6325 C2S(WOW_REASON_RA_MATCH);
6326 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
6327 C2S(WOW_REASON_IOAC_MAGIC_EVENT);
6328 C2S(WOW_REASON_IOAC_SHORT_EVENT);
6329 C2S(WOW_REASON_IOAC_EXTEND_EVENT);
6330 C2S(WOW_REASON_IOAC_TIMER_EVENT);
6331 C2S(WOW_REASON_ROAM_HO);
6332 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
6333 C2S(WOW_REASON_BEACON_RECV);
6334 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
6335 C2S(WOW_REASON_DEBUG_TEST);
6343 struct wmi_wow_ev_arg {
6346 enum wmi_wow_wake_reason wake_reason;
6350 #define WOW_MIN_PATTERN_SIZE 1
6351 #define WOW_MAX_PATTERN_SIZE 148
6352 #define WOW_MAX_PKT_OFFSET 128
6354 enum wmi_tdls_state {
6356 WMI_TDLS_ENABLE_PASSIVE,
6357 WMI_TDLS_ENABLE_ACTIVE,
6360 enum wmi_tdls_peer_state {
6361 WMI_TDLS_PEER_STATE_PEERING,
6362 WMI_TDLS_PEER_STATE_CONNECTED,
6363 WMI_TDLS_PEER_STATE_TEARDOWN,
6366 struct wmi_tdls_peer_update_cmd_arg {
6368 enum wmi_tdls_peer_state peer_state;
6372 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
6374 struct wmi_tdls_peer_capab_arg {
6375 u8 peer_uapsd_queues;
6377 u32 buff_sta_support;
6378 u32 off_chan_support;
6379 u32 peer_curr_operclass;
6380 u32 self_curr_operclass;
6382 u32 peer_operclass_len;
6383 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
6384 u32 is_peer_responder;
6385 u32 pref_offchan_num;
6386 u32 pref_offchan_bw;
6389 enum wmi_txbf_conf {
6390 WMI_TXBF_CONF_UNSUPPORTED,
6391 WMI_TXBF_CONF_BEFORE_ASSOC,
6392 WMI_TXBF_CONF_AFTER_ASSOC,
6395 #define WMI_CCA_DETECT_LEVEL_AUTO 0
6396 #define WMI_CCA_DETECT_MARGIN_AUTO 0
6398 struct wmi_pdev_set_adaptive_cca_params {
6400 __le32 cca_detect_level;
6401 __le32 cca_detect_margin;
6406 struct ath10k_fw_stats_pdev;
6407 struct ath10k_fw_stats_peer;
6408 struct ath10k_fw_stats;
6410 int ath10k_wmi_attach(struct ath10k *ar);
6411 void ath10k_wmi_detach(struct ath10k *ar);
6412 void ath10k_wmi_free_host_mem(struct ath10k *ar);
6413 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
6414 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
6416 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
6417 int ath10k_wmi_connect(struct ath10k *ar);
6419 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
6420 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
6421 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
6423 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *);
6425 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
6426 struct ath10k_fw_stats_pdev *dst);
6427 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
6428 struct ath10k_fw_stats_pdev *dst);
6429 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
6430 struct ath10k_fw_stats_pdev *dst);
6431 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
6432 struct ath10k_fw_stats_pdev *dst);
6433 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
6434 struct ath10k_fw_stats_peer *dst);
6435 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
6436 struct wmi_host_mem_chunks *chunks);
6437 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
6438 const struct wmi_start_scan_arg *arg);
6439 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
6440 const struct wmi_wmm_params_arg *arg);
6441 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
6442 const struct wmi_channel_arg *arg);
6443 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
6445 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
6446 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
6447 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
6448 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
6449 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
6450 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
6451 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
6452 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
6453 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
6454 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
6455 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
6456 void ath10k_wmi_event_dfs(struct ath10k *ar,
6457 struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
6458 void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
6459 struct wmi_phyerr_ev_arg *phyerr,
6461 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
6462 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
6463 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
6464 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
6465 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
6466 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
6467 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
6468 struct sk_buff *skb);
6469 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
6470 struct sk_buff *skb);
6471 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
6472 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
6473 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
6474 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
6475 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
6476 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
6477 struct sk_buff *skb);
6478 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
6479 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
6480 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
6481 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
6482 struct sk_buff *skb);
6483 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
6484 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
6485 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
6486 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
6487 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
6488 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
6489 int left_len, struct wmi_phyerr_ev_arg *arg);
6490 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
6491 struct ath10k_fw_stats *fw_stats,
6493 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
6494 struct ath10k_fw_stats *fw_stats,
6496 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
6497 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
6498 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
6499 struct ath10k_fw_stats *fw_stats,
6501 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
6502 enum wmi_vdev_subtype subtype);
6504 #endif /* _WMI_H_ */