Merge tag 'hwlock-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc...
[linux-2.6-block.git] / drivers / net / ppp / ppp_async.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * PPP async serial channel driver for Linux.
4  *
5  * Copyright 1999 Paul Mackerras.
6  *
7  * This driver provides the encapsulation and framing for sending
8  * and receiving PPP frames over async serial lines.  It relies on
9  * the generic PPP layer to give it frames to send and to process
10  * received frames.  It implements the PPP line discipline.
11  *
12  * Part of the code in this driver was inspired by the old async-only
13  * PPP driver, written by Michael Callahan and Al Longyear, and
14  * subsequently hacked by Paul Mackerras.
15  */
16
17 #include <linux/module.h>
18 #include <linux/kernel.h>
19 #include <linux/skbuff.h>
20 #include <linux/tty.h>
21 #include <linux/netdevice.h>
22 #include <linux/poll.h>
23 #include <linux/crc-ccitt.h>
24 #include <linux/ppp_defs.h>
25 #include <linux/ppp-ioctl.h>
26 #include <linux/ppp_channel.h>
27 #include <linux/spinlock.h>
28 #include <linux/init.h>
29 #include <linux/interrupt.h>
30 #include <linux/jiffies.h>
31 #include <linux/slab.h>
32 #include <asm/unaligned.h>
33 #include <linux/uaccess.h>
34 #include <asm/string.h>
35
36 #define PPP_VERSION     "2.4.2"
37
38 #define OBUFSIZE        4096
39
40 /* Structure for storing local state. */
41 struct asyncppp {
42         struct tty_struct *tty;
43         unsigned int    flags;
44         unsigned int    state;
45         unsigned int    rbits;
46         int             mru;
47         spinlock_t      xmit_lock;
48         spinlock_t      recv_lock;
49         unsigned long   xmit_flags;
50         u32             xaccm[8];
51         u32             raccm;
52         unsigned int    bytes_sent;
53         unsigned int    bytes_rcvd;
54
55         struct sk_buff  *tpkt;
56         int             tpkt_pos;
57         u16             tfcs;
58         unsigned char   *optr;
59         unsigned char   *olim;
60         unsigned long   last_xmit;
61
62         struct sk_buff  *rpkt;
63         int             lcp_fcs;
64         struct sk_buff_head rqueue;
65
66         struct tasklet_struct tsk;
67
68         refcount_t      refcnt;
69         struct completion dead;
70         struct ppp_channel chan;        /* interface to generic ppp layer */
71         unsigned char   obuf[OBUFSIZE];
72 };
73
74 /* Bit numbers in xmit_flags */
75 #define XMIT_WAKEUP     0
76 #define XMIT_FULL       1
77 #define XMIT_BUSY       2
78
79 /* State bits */
80 #define SC_TOSS         1
81 #define SC_ESCAPE       2
82 #define SC_PREV_ERROR   4
83
84 /* Bits in rbits */
85 #define SC_RCV_BITS     (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
86
87 static int flag_time = HZ;
88 module_param(flag_time, int, 0);
89 MODULE_PARM_DESC(flag_time, "ppp_async: interval between flagged packets (in clock ticks)");
90 MODULE_LICENSE("GPL");
91 MODULE_ALIAS_LDISC(N_PPP);
92
93 /*
94  * Prototypes.
95  */
96 static int ppp_async_encode(struct asyncppp *ap);
97 static int ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb);
98 static int ppp_async_push(struct asyncppp *ap);
99 static void ppp_async_flush_output(struct asyncppp *ap);
100 static void ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
101                             const u8 *flags, int count);
102 static int ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd,
103                            unsigned long arg);
104 static void ppp_async_process(struct tasklet_struct *t);
105
106 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
107                            int len, int inbound);
108
109 static const struct ppp_channel_ops async_ops = {
110         .start_xmit = ppp_async_send,
111         .ioctl      = ppp_async_ioctl,
112 };
113
114 /*
115  * Routines implementing the PPP line discipline.
116  */
117
118 /*
119  * We have a potential race on dereferencing tty->disc_data,
120  * because the tty layer provides no locking at all - thus one
121  * cpu could be running ppp_asynctty_receive while another
122  * calls ppp_asynctty_close, which zeroes tty->disc_data and
123  * frees the memory that ppp_asynctty_receive is using.  The best
124  * way to fix this is to use a rwlock in the tty struct, but for now
125  * we use a single global rwlock for all ttys in ppp line discipline.
126  *
127  * FIXME: this is no longer true. The _close path for the ldisc is
128  * now guaranteed to be sane.
129  */
130 static DEFINE_RWLOCK(disc_data_lock);
131
132 static struct asyncppp *ap_get(struct tty_struct *tty)
133 {
134         struct asyncppp *ap;
135
136         read_lock(&disc_data_lock);
137         ap = tty->disc_data;
138         if (ap != NULL)
139                 refcount_inc(&ap->refcnt);
140         read_unlock(&disc_data_lock);
141         return ap;
142 }
143
144 static void ap_put(struct asyncppp *ap)
145 {
146         if (refcount_dec_and_test(&ap->refcnt))
147                 complete(&ap->dead);
148 }
149
150 /*
151  * Called when a tty is put into PPP line discipline. Called in process
152  * context.
153  */
154 static int
155 ppp_asynctty_open(struct tty_struct *tty)
156 {
157         struct asyncppp *ap;
158         int err;
159         int speed;
160
161         if (tty->ops->write == NULL)
162                 return -EOPNOTSUPP;
163
164         err = -ENOMEM;
165         ap = kzalloc(sizeof(*ap), GFP_KERNEL);
166         if (!ap)
167                 goto out;
168
169         /* initialize the asyncppp structure */
170         ap->tty = tty;
171         ap->mru = PPP_MRU;
172         spin_lock_init(&ap->xmit_lock);
173         spin_lock_init(&ap->recv_lock);
174         ap->xaccm[0] = ~0U;
175         ap->xaccm[3] = 0x60000000U;
176         ap->raccm = ~0U;
177         ap->optr = ap->obuf;
178         ap->olim = ap->obuf;
179         ap->lcp_fcs = -1;
180
181         skb_queue_head_init(&ap->rqueue);
182         tasklet_setup(&ap->tsk, ppp_async_process);
183
184         refcount_set(&ap->refcnt, 1);
185         init_completion(&ap->dead);
186
187         ap->chan.private = ap;
188         ap->chan.ops = &async_ops;
189         ap->chan.mtu = PPP_MRU;
190         speed = tty_get_baud_rate(tty);
191         ap->chan.speed = speed;
192         err = ppp_register_channel(&ap->chan);
193         if (err)
194                 goto out_free;
195
196         tty->disc_data = ap;
197         tty->receive_room = 65536;
198         return 0;
199
200  out_free:
201         kfree(ap);
202  out:
203         return err;
204 }
205
206 /*
207  * Called when the tty is put into another line discipline
208  * or it hangs up.  We have to wait for any cpu currently
209  * executing in any of the other ppp_asynctty_* routines to
210  * finish before we can call ppp_unregister_channel and free
211  * the asyncppp struct.  This routine must be called from
212  * process context, not interrupt or softirq context.
213  */
214 static void
215 ppp_asynctty_close(struct tty_struct *tty)
216 {
217         struct asyncppp *ap;
218
219         write_lock_irq(&disc_data_lock);
220         ap = tty->disc_data;
221         tty->disc_data = NULL;
222         write_unlock_irq(&disc_data_lock);
223         if (!ap)
224                 return;
225
226         /*
227          * We have now ensured that nobody can start using ap from now
228          * on, but we have to wait for all existing users to finish.
229          * Note that ppp_unregister_channel ensures that no calls to
230          * our channel ops (i.e. ppp_async_send/ioctl) are in progress
231          * by the time it returns.
232          */
233         if (!refcount_dec_and_test(&ap->refcnt))
234                 wait_for_completion(&ap->dead);
235         tasklet_kill(&ap->tsk);
236
237         ppp_unregister_channel(&ap->chan);
238         kfree_skb(ap->rpkt);
239         skb_queue_purge(&ap->rqueue);
240         kfree_skb(ap->tpkt);
241         kfree(ap);
242 }
243
244 /*
245  * Called on tty hangup in process context.
246  *
247  * Wait for I/O to driver to complete and unregister PPP channel.
248  * This is already done by the close routine, so just call that.
249  */
250 static void ppp_asynctty_hangup(struct tty_struct *tty)
251 {
252         ppp_asynctty_close(tty);
253 }
254
255 /*
256  * Read does nothing - no data is ever available this way.
257  * Pppd reads and writes packets via /dev/ppp instead.
258  */
259 static ssize_t
260 ppp_asynctty_read(struct tty_struct *tty, struct file *file, u8 *buf,
261                   size_t count, void **cookie, unsigned long offset)
262 {
263         return -EAGAIN;
264 }
265
266 /*
267  * Write on the tty does nothing, the packets all come in
268  * from the ppp generic stuff.
269  */
270 static ssize_t
271 ppp_asynctty_write(struct tty_struct *tty, struct file *file, const u8 *buf,
272                    size_t count)
273 {
274         return -EAGAIN;
275 }
276
277 /*
278  * Called in process context only. May be re-entered by multiple
279  * ioctl calling threads.
280  */
281
282 static int
283 ppp_asynctty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
284 {
285         struct asyncppp *ap = ap_get(tty);
286         int err, val;
287         int __user *p = (int __user *)arg;
288
289         if (!ap)
290                 return -ENXIO;
291         err = -EFAULT;
292         switch (cmd) {
293         case PPPIOCGCHAN:
294                 err = -EFAULT;
295                 if (put_user(ppp_channel_index(&ap->chan), p))
296                         break;
297                 err = 0;
298                 break;
299
300         case PPPIOCGUNIT:
301                 err = -EFAULT;
302                 if (put_user(ppp_unit_number(&ap->chan), p))
303                         break;
304                 err = 0;
305                 break;
306
307         case TCFLSH:
308                 /* flush our buffers and the serial port's buffer */
309                 if (arg == TCIOFLUSH || arg == TCOFLUSH)
310                         ppp_async_flush_output(ap);
311                 err = n_tty_ioctl_helper(tty, cmd, arg);
312                 break;
313
314         case FIONREAD:
315                 val = 0;
316                 if (put_user(val, p))
317                         break;
318                 err = 0;
319                 break;
320
321         default:
322                 /* Try the various mode ioctls */
323                 err = tty_mode_ioctl(tty, cmd, arg);
324         }
325
326         ap_put(ap);
327         return err;
328 }
329
330 /* May sleep, don't call from interrupt level or with interrupts disabled */
331 static void
332 ppp_asynctty_receive(struct tty_struct *tty, const u8 *buf, const u8 *cflags,
333                      size_t count)
334 {
335         struct asyncppp *ap = ap_get(tty);
336         unsigned long flags;
337
338         if (!ap)
339                 return;
340         spin_lock_irqsave(&ap->recv_lock, flags);
341         ppp_async_input(ap, buf, cflags, count);
342         spin_unlock_irqrestore(&ap->recv_lock, flags);
343         if (!skb_queue_empty(&ap->rqueue))
344                 tasklet_schedule(&ap->tsk);
345         ap_put(ap);
346         tty_unthrottle(tty);
347 }
348
349 static void
350 ppp_asynctty_wakeup(struct tty_struct *tty)
351 {
352         struct asyncppp *ap = ap_get(tty);
353
354         clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
355         if (!ap)
356                 return;
357         set_bit(XMIT_WAKEUP, &ap->xmit_flags);
358         tasklet_schedule(&ap->tsk);
359         ap_put(ap);
360 }
361
362
363 static struct tty_ldisc_ops ppp_ldisc = {
364         .owner  = THIS_MODULE,
365         .num    = N_PPP,
366         .name   = "ppp",
367         .open   = ppp_asynctty_open,
368         .close  = ppp_asynctty_close,
369         .hangup = ppp_asynctty_hangup,
370         .read   = ppp_asynctty_read,
371         .write  = ppp_asynctty_write,
372         .ioctl  = ppp_asynctty_ioctl,
373         .receive_buf = ppp_asynctty_receive,
374         .write_wakeup = ppp_asynctty_wakeup,
375 };
376
377 static int __init
378 ppp_async_init(void)
379 {
380         int err;
381
382         err = tty_register_ldisc(&ppp_ldisc);
383         if (err != 0)
384                 printk(KERN_ERR "PPP_async: error %d registering line disc.\n",
385                        err);
386         return err;
387 }
388
389 /*
390  * The following routines provide the PPP channel interface.
391  */
392 static int
393 ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd, unsigned long arg)
394 {
395         struct asyncppp *ap = chan->private;
396         void __user *argp = (void __user *)arg;
397         int __user *p = argp;
398         int err, val;
399         u32 accm[8];
400
401         err = -EFAULT;
402         switch (cmd) {
403         case PPPIOCGFLAGS:
404                 val = ap->flags | ap->rbits;
405                 if (put_user(val, p))
406                         break;
407                 err = 0;
408                 break;
409         case PPPIOCSFLAGS:
410                 if (get_user(val, p))
411                         break;
412                 ap->flags = val & ~SC_RCV_BITS;
413                 spin_lock_irq(&ap->recv_lock);
414                 ap->rbits = val & SC_RCV_BITS;
415                 spin_unlock_irq(&ap->recv_lock);
416                 err = 0;
417                 break;
418
419         case PPPIOCGASYNCMAP:
420                 if (put_user(ap->xaccm[0], (u32 __user *)argp))
421                         break;
422                 err = 0;
423                 break;
424         case PPPIOCSASYNCMAP:
425                 if (get_user(ap->xaccm[0], (u32 __user *)argp))
426                         break;
427                 err = 0;
428                 break;
429
430         case PPPIOCGRASYNCMAP:
431                 if (put_user(ap->raccm, (u32 __user *)argp))
432                         break;
433                 err = 0;
434                 break;
435         case PPPIOCSRASYNCMAP:
436                 if (get_user(ap->raccm, (u32 __user *)argp))
437                         break;
438                 err = 0;
439                 break;
440
441         case PPPIOCGXASYNCMAP:
442                 if (copy_to_user(argp, ap->xaccm, sizeof(ap->xaccm)))
443                         break;
444                 err = 0;
445                 break;
446         case PPPIOCSXASYNCMAP:
447                 if (copy_from_user(accm, argp, sizeof(accm)))
448                         break;
449                 accm[2] &= ~0x40000000U;        /* can't escape 0x5e */
450                 accm[3] |= 0x60000000U;         /* must escape 0x7d, 0x7e */
451                 memcpy(ap->xaccm, accm, sizeof(ap->xaccm));
452                 err = 0;
453                 break;
454
455         case PPPIOCGMRU:
456                 if (put_user(ap->mru, p))
457                         break;
458                 err = 0;
459                 break;
460         case PPPIOCSMRU:
461                 if (get_user(val, p))
462                         break;
463                 if (val < PPP_MRU)
464                         val = PPP_MRU;
465                 ap->mru = val;
466                 err = 0;
467                 break;
468
469         default:
470                 err = -ENOTTY;
471         }
472
473         return err;
474 }
475
476 /*
477  * This is called at softirq level to deliver received packets
478  * to the ppp_generic code, and to tell the ppp_generic code
479  * if we can accept more output now.
480  */
481 static void ppp_async_process(struct tasklet_struct *t)
482 {
483         struct asyncppp *ap = from_tasklet(ap, t, tsk);
484         struct sk_buff *skb;
485
486         /* process received packets */
487         while ((skb = skb_dequeue(&ap->rqueue)) != NULL) {
488                 if (skb->cb[0])
489                         ppp_input_error(&ap->chan, 0);
490                 ppp_input(&ap->chan, skb);
491         }
492
493         /* try to push more stuff out */
494         if (test_bit(XMIT_WAKEUP, &ap->xmit_flags) && ppp_async_push(ap))
495                 ppp_output_wakeup(&ap->chan);
496 }
497
498 /*
499  * Procedures for encapsulation and framing.
500  */
501
502 /*
503  * Procedure to encode the data for async serial transmission.
504  * Does octet stuffing (escaping), puts the address/control bytes
505  * on if A/C compression is disabled, and does protocol compression.
506  * Assumes ap->tpkt != 0 on entry.
507  * Returns 1 if we finished the current frame, 0 otherwise.
508  */
509
510 #define PUT_BYTE(ap, buf, c, islcp)     do {            \
511         if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\
512                 *buf++ = PPP_ESCAPE;                    \
513                 *buf++ = c ^ PPP_TRANS;                 \
514         } else                                          \
515                 *buf++ = c;                             \
516 } while (0)
517
518 static int
519 ppp_async_encode(struct asyncppp *ap)
520 {
521         int fcs, i, count, c, proto;
522         unsigned char *buf, *buflim;
523         unsigned char *data;
524         int islcp;
525
526         buf = ap->obuf;
527         ap->olim = buf;
528         ap->optr = buf;
529         i = ap->tpkt_pos;
530         data = ap->tpkt->data;
531         count = ap->tpkt->len;
532         fcs = ap->tfcs;
533         proto = get_unaligned_be16(data);
534
535         /*
536          * LCP packets with code values between 1 (configure-request)
537          * and 7 (code-reject) must be sent as though no options
538          * had been negotiated.
539          */
540         islcp = proto == PPP_LCP && 1 <= data[2] && data[2] <= 7;
541
542         if (i == 0) {
543                 if (islcp)
544                         async_lcp_peek(ap, data, count, 0);
545
546                 /*
547                  * Start of a new packet - insert the leading FLAG
548                  * character if necessary.
549                  */
550                 if (islcp || flag_time == 0 ||
551                     time_after_eq(jiffies, ap->last_xmit + flag_time))
552                         *buf++ = PPP_FLAG;
553                 ap->last_xmit = jiffies;
554                 fcs = PPP_INITFCS;
555
556                 /*
557                  * Put in the address/control bytes if necessary
558                  */
559                 if ((ap->flags & SC_COMP_AC) == 0 || islcp) {
560                         PUT_BYTE(ap, buf, 0xff, islcp);
561                         fcs = PPP_FCS(fcs, 0xff);
562                         PUT_BYTE(ap, buf, 0x03, islcp);
563                         fcs = PPP_FCS(fcs, 0x03);
564                 }
565         }
566
567         /*
568          * Once we put in the last byte, we need to put in the FCS
569          * and closing flag, so make sure there is at least 7 bytes
570          * of free space in the output buffer.
571          */
572         buflim = ap->obuf + OBUFSIZE - 6;
573         while (i < count && buf < buflim) {
574                 c = data[i++];
575                 if (i == 1 && c == 0 && (ap->flags & SC_COMP_PROT))
576                         continue;       /* compress protocol field */
577                 fcs = PPP_FCS(fcs, c);
578                 PUT_BYTE(ap, buf, c, islcp);
579         }
580
581         if (i < count) {
582                 /*
583                  * Remember where we are up to in this packet.
584                  */
585                 ap->olim = buf;
586                 ap->tpkt_pos = i;
587                 ap->tfcs = fcs;
588                 return 0;
589         }
590
591         /*
592          * We have finished the packet.  Add the FCS and flag.
593          */
594         fcs = ~fcs;
595         c = fcs & 0xff;
596         PUT_BYTE(ap, buf, c, islcp);
597         c = (fcs >> 8) & 0xff;
598         PUT_BYTE(ap, buf, c, islcp);
599         *buf++ = PPP_FLAG;
600         ap->olim = buf;
601
602         consume_skb(ap->tpkt);
603         ap->tpkt = NULL;
604         return 1;
605 }
606
607 /*
608  * Transmit-side routines.
609  */
610
611 /*
612  * Send a packet to the peer over an async tty line.
613  * Returns 1 iff the packet was accepted.
614  * If the packet was not accepted, we will call ppp_output_wakeup
615  * at some later time.
616  */
617 static int
618 ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb)
619 {
620         struct asyncppp *ap = chan->private;
621
622         ppp_async_push(ap);
623
624         if (test_and_set_bit(XMIT_FULL, &ap->xmit_flags))
625                 return 0;       /* already full */
626         ap->tpkt = skb;
627         ap->tpkt_pos = 0;
628
629         ppp_async_push(ap);
630         return 1;
631 }
632
633 /*
634  * Push as much data as possible out to the tty.
635  */
636 static int
637 ppp_async_push(struct asyncppp *ap)
638 {
639         int avail, sent, done = 0;
640         struct tty_struct *tty = ap->tty;
641         int tty_stuffed = 0;
642
643         /*
644          * We can get called recursively here if the tty write
645          * function calls our wakeup function.  This can happen
646          * for example on a pty with both the master and slave
647          * set to PPP line discipline.
648          * We use the XMIT_BUSY bit to detect this and get out,
649          * leaving the XMIT_WAKEUP bit set to tell the other
650          * instance that it may now be able to write more now.
651          */
652         if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
653                 return 0;
654         spin_lock_bh(&ap->xmit_lock);
655         for (;;) {
656                 if (test_and_clear_bit(XMIT_WAKEUP, &ap->xmit_flags))
657                         tty_stuffed = 0;
658                 if (!tty_stuffed && ap->optr < ap->olim) {
659                         avail = ap->olim - ap->optr;
660                         set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
661                         sent = tty->ops->write(tty, ap->optr, avail);
662                         if (sent < 0)
663                                 goto flush;     /* error, e.g. loss of CD */
664                         ap->optr += sent;
665                         if (sent < avail)
666                                 tty_stuffed = 1;
667                         continue;
668                 }
669                 if (ap->optr >= ap->olim && ap->tpkt) {
670                         if (ppp_async_encode(ap)) {
671                                 /* finished processing ap->tpkt */
672                                 clear_bit(XMIT_FULL, &ap->xmit_flags);
673                                 done = 1;
674                         }
675                         continue;
676                 }
677                 /*
678                  * We haven't made any progress this time around.
679                  * Clear XMIT_BUSY to let other callers in, but
680                  * after doing so we have to check if anyone set
681                  * XMIT_WAKEUP since we last checked it.  If they
682                  * did, we should try again to set XMIT_BUSY and go
683                  * around again in case XMIT_BUSY was still set when
684                  * the other caller tried.
685                  */
686                 clear_bit(XMIT_BUSY, &ap->xmit_flags);
687                 /* any more work to do? if not, exit the loop */
688                 if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags) ||
689                       (!tty_stuffed && ap->tpkt)))
690                         break;
691                 /* more work to do, see if we can do it now */
692                 if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
693                         break;
694         }
695         spin_unlock_bh(&ap->xmit_lock);
696         return done;
697
698 flush:
699         clear_bit(XMIT_BUSY, &ap->xmit_flags);
700         if (ap->tpkt) {
701                 kfree_skb(ap->tpkt);
702                 ap->tpkt = NULL;
703                 clear_bit(XMIT_FULL, &ap->xmit_flags);
704                 done = 1;
705         }
706         ap->optr = ap->olim;
707         spin_unlock_bh(&ap->xmit_lock);
708         return done;
709 }
710
711 /*
712  * Flush output from our internal buffers.
713  * Called for the TCFLSH ioctl. Can be entered in parallel
714  * but this is covered by the xmit_lock.
715  */
716 static void
717 ppp_async_flush_output(struct asyncppp *ap)
718 {
719         int done = 0;
720
721         spin_lock_bh(&ap->xmit_lock);
722         ap->optr = ap->olim;
723         if (ap->tpkt != NULL) {
724                 kfree_skb(ap->tpkt);
725                 ap->tpkt = NULL;
726                 clear_bit(XMIT_FULL, &ap->xmit_flags);
727                 done = 1;
728         }
729         spin_unlock_bh(&ap->xmit_lock);
730         if (done)
731                 ppp_output_wakeup(&ap->chan);
732 }
733
734 /*
735  * Receive-side routines.
736  */
737
738 /* see how many ordinary chars there are at the start of buf */
739 static inline int
740 scan_ordinary(struct asyncppp *ap, const unsigned char *buf, int count)
741 {
742         int i, c;
743
744         for (i = 0; i < count; ++i) {
745                 c = buf[i];
746                 if (c == PPP_ESCAPE || c == PPP_FLAG ||
747                     (c < 0x20 && (ap->raccm & (1 << c)) != 0))
748                         break;
749         }
750         return i;
751 }
752
753 /* called when a flag is seen - do end-of-packet processing */
754 static void
755 process_input_packet(struct asyncppp *ap)
756 {
757         struct sk_buff *skb;
758         unsigned char *p;
759         unsigned int len, fcs;
760
761         skb = ap->rpkt;
762         if (ap->state & (SC_TOSS | SC_ESCAPE))
763                 goto err;
764
765         if (skb == NULL)
766                 return;         /* 0-length packet */
767
768         /* check the FCS */
769         p = skb->data;
770         len = skb->len;
771         if (len < 3)
772                 goto err;       /* too short */
773         fcs = PPP_INITFCS;
774         for (; len > 0; --len)
775                 fcs = PPP_FCS(fcs, *p++);
776         if (fcs != PPP_GOODFCS)
777                 goto err;       /* bad FCS */
778         skb_trim(skb, skb->len - 2);
779
780         /* check for address/control and protocol compression */
781         p = skb->data;
782         if (p[0] == PPP_ALLSTATIONS) {
783                 /* chop off address/control */
784                 if (p[1] != PPP_UI || skb->len < 3)
785                         goto err;
786                 p = skb_pull(skb, 2);
787         }
788
789         /* If protocol field is not compressed, it can be LCP packet */
790         if (!(p[0] & 0x01)) {
791                 unsigned int proto;
792
793                 if (skb->len < 2)
794                         goto err;
795                 proto = (p[0] << 8) + p[1];
796                 if (proto == PPP_LCP)
797                         async_lcp_peek(ap, p, skb->len, 1);
798         }
799
800         /* queue the frame to be processed */
801         skb->cb[0] = ap->state;
802         skb_queue_tail(&ap->rqueue, skb);
803         ap->rpkt = NULL;
804         ap->state = 0;
805         return;
806
807  err:
808         /* frame had an error, remember that, reset SC_TOSS & SC_ESCAPE */
809         ap->state = SC_PREV_ERROR;
810         if (skb) {
811                 /* make skb appear as freshly allocated */
812                 skb_trim(skb, 0);
813                 skb_reserve(skb, - skb_headroom(skb));
814         }
815 }
816
817 /* Called when the tty driver has data for us. Runs parallel with the
818    other ldisc functions but will not be re-entered */
819
820 static void
821 ppp_async_input(struct asyncppp *ap, const u8 *buf, const u8 *flags, int count)
822 {
823         struct sk_buff *skb;
824         int c, i, j, n, s, f;
825         unsigned char *sp;
826
827         /* update bits used for 8-bit cleanness detection */
828         if (~ap->rbits & SC_RCV_BITS) {
829                 s = 0;
830                 for (i = 0; i < count; ++i) {
831                         c = buf[i];
832                         if (flags && flags[i] != 0)
833                                 continue;
834                         s |= (c & 0x80)? SC_RCV_B7_1: SC_RCV_B7_0;
835                         c = ((c >> 4) ^ c) & 0xf;
836                         s |= (0x6996 & (1 << c))? SC_RCV_ODDP: SC_RCV_EVNP;
837                 }
838                 ap->rbits |= s;
839         }
840
841         while (count > 0) {
842                 /* scan through and see how many chars we can do in bulk */
843                 if ((ap->state & SC_ESCAPE) && buf[0] == PPP_ESCAPE)
844                         n = 1;
845                 else
846                         n = scan_ordinary(ap, buf, count);
847
848                 f = 0;
849                 if (flags && (ap->state & SC_TOSS) == 0) {
850                         /* check the flags to see if any char had an error */
851                         for (j = 0; j < n; ++j)
852                                 if ((f = flags[j]) != 0)
853                                         break;
854                 }
855                 if (f != 0) {
856                         /* start tossing */
857                         ap->state |= SC_TOSS;
858
859                 } else if (n > 0 && (ap->state & SC_TOSS) == 0) {
860                         /* stuff the chars in the skb */
861                         skb = ap->rpkt;
862                         if (!skb) {
863                                 skb = dev_alloc_skb(ap->mru + PPP_HDRLEN + 2);
864                                 if (!skb)
865                                         goto nomem;
866                                 ap->rpkt = skb;
867                         }
868                         if (skb->len == 0) {
869                                 /* Try to get the payload 4-byte aligned.
870                                  * This should match the
871                                  * PPP_ALLSTATIONS/PPP_UI/compressed tests in
872                                  * process_input_packet, but we do not have
873                                  * enough chars here to test buf[1] and buf[2].
874                                  */
875                                 if (buf[0] != PPP_ALLSTATIONS)
876                                         skb_reserve(skb, 2 + (buf[0] & 1));
877                         }
878                         if (n > skb_tailroom(skb)) {
879                                 /* packet overflowed MRU */
880                                 ap->state |= SC_TOSS;
881                         } else {
882                                 sp = skb_put_data(skb, buf, n);
883                                 if (ap->state & SC_ESCAPE) {
884                                         sp[0] ^= PPP_TRANS;
885                                         ap->state &= ~SC_ESCAPE;
886                                 }
887                         }
888                 }
889
890                 if (n >= count)
891                         break;
892
893                 c = buf[n];
894                 if (flags != NULL && flags[n] != 0) {
895                         ap->state |= SC_TOSS;
896                 } else if (c == PPP_FLAG) {
897                         process_input_packet(ap);
898                 } else if (c == PPP_ESCAPE) {
899                         ap->state |= SC_ESCAPE;
900                 } else if (I_IXON(ap->tty)) {
901                         if (c == START_CHAR(ap->tty))
902                                 start_tty(ap->tty);
903                         else if (c == STOP_CHAR(ap->tty))
904                                 stop_tty(ap->tty);
905                 }
906                 /* otherwise it's a char in the recv ACCM */
907                 ++n;
908
909                 buf += n;
910                 if (flags)
911                         flags += n;
912                 count -= n;
913         }
914         return;
915
916  nomem:
917         printk(KERN_ERR "PPPasync: no memory (input pkt)\n");
918         ap->state |= SC_TOSS;
919 }
920
921 /*
922  * We look at LCP frames going past so that we can notice
923  * and react to the LCP configure-ack from the peer.
924  * In the situation where the peer has been sent a configure-ack
925  * already, LCP is up once it has sent its configure-ack
926  * so the immediately following packet can be sent with the
927  * configured LCP options.  This allows us to process the following
928  * packet correctly without pppd needing to respond quickly.
929  *
930  * We only respond to the received configure-ack if we have just
931  * sent a configure-request, and the configure-ack contains the
932  * same data (this is checked using a 16-bit crc of the data).
933  */
934 #define CONFREQ         1       /* LCP code field values */
935 #define CONFACK         2
936 #define LCP_MRU         1       /* LCP option numbers */
937 #define LCP_ASYNCMAP    2
938
939 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
940                            int len, int inbound)
941 {
942         int dlen, fcs, i, code;
943         u32 val;
944
945         data += 2;              /* skip protocol bytes */
946         len -= 2;
947         if (len < 4)            /* 4 = code, ID, length */
948                 return;
949         code = data[0];
950         if (code != CONFACK && code != CONFREQ)
951                 return;
952         dlen = get_unaligned_be16(data + 2);
953         if (len < dlen)
954                 return;         /* packet got truncated or length is bogus */
955
956         if (code == (inbound? CONFACK: CONFREQ)) {
957                 /*
958                  * sent confreq or received confack:
959                  * calculate the crc of the data from the ID field on.
960                  */
961                 fcs = PPP_INITFCS;
962                 for (i = 1; i < dlen; ++i)
963                         fcs = PPP_FCS(fcs, data[i]);
964
965                 if (!inbound) {
966                         /* outbound confreq - remember the crc for later */
967                         ap->lcp_fcs = fcs;
968                         return;
969                 }
970
971                 /* received confack, check the crc */
972                 fcs ^= ap->lcp_fcs;
973                 ap->lcp_fcs = -1;
974                 if (fcs != 0)
975                         return;
976         } else if (inbound)
977                 return; /* not interested in received confreq */
978
979         /* process the options in the confack */
980         data += 4;
981         dlen -= 4;
982         /* data[0] is code, data[1] is length */
983         while (dlen >= 2 && dlen >= data[1] && data[1] >= 2) {
984                 switch (data[0]) {
985                 case LCP_MRU:
986                         val = get_unaligned_be16(data + 2);
987                         if (inbound)
988                                 ap->mru = val;
989                         else
990                                 ap->chan.mtu = val;
991                         break;
992                 case LCP_ASYNCMAP:
993                         val = get_unaligned_be32(data + 2);
994                         if (inbound)
995                                 ap->raccm = val;
996                         else
997                                 ap->xaccm[0] = val;
998                         break;
999                 }
1000                 dlen -= data[1];
1001                 data += data[1];
1002         }
1003 }
1004
1005 static void __exit ppp_async_cleanup(void)
1006 {
1007         tty_unregister_ldisc(&ppp_ldisc);
1008 }
1009
1010 module_init(ppp_async_init);
1011 module_exit(ppp_async_cleanup);