Merge tag 'for-6.2-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave...
[linux-block.git] / drivers / net / ppp / ppp_async.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * PPP async serial channel driver for Linux.
4  *
5  * Copyright 1999 Paul Mackerras.
6  *
7  * This driver provides the encapsulation and framing for sending
8  * and receiving PPP frames over async serial lines.  It relies on
9  * the generic PPP layer to give it frames to send and to process
10  * received frames.  It implements the PPP line discipline.
11  *
12  * Part of the code in this driver was inspired by the old async-only
13  * PPP driver, written by Michael Callahan and Al Longyear, and
14  * subsequently hacked by Paul Mackerras.
15  */
16
17 #include <linux/module.h>
18 #include <linux/kernel.h>
19 #include <linux/skbuff.h>
20 #include <linux/tty.h>
21 #include <linux/netdevice.h>
22 #include <linux/poll.h>
23 #include <linux/crc-ccitt.h>
24 #include <linux/ppp_defs.h>
25 #include <linux/ppp-ioctl.h>
26 #include <linux/ppp_channel.h>
27 #include <linux/spinlock.h>
28 #include <linux/init.h>
29 #include <linux/interrupt.h>
30 #include <linux/jiffies.h>
31 #include <linux/slab.h>
32 #include <asm/unaligned.h>
33 #include <linux/uaccess.h>
34 #include <asm/string.h>
35
36 #define PPP_VERSION     "2.4.2"
37
38 #define OBUFSIZE        4096
39
40 /* Structure for storing local state. */
41 struct asyncppp {
42         struct tty_struct *tty;
43         unsigned int    flags;
44         unsigned int    state;
45         unsigned int    rbits;
46         int             mru;
47         spinlock_t      xmit_lock;
48         spinlock_t      recv_lock;
49         unsigned long   xmit_flags;
50         u32             xaccm[8];
51         u32             raccm;
52         unsigned int    bytes_sent;
53         unsigned int    bytes_rcvd;
54
55         struct sk_buff  *tpkt;
56         int             tpkt_pos;
57         u16             tfcs;
58         unsigned char   *optr;
59         unsigned char   *olim;
60         unsigned long   last_xmit;
61
62         struct sk_buff  *rpkt;
63         int             lcp_fcs;
64         struct sk_buff_head rqueue;
65
66         struct tasklet_struct tsk;
67
68         refcount_t      refcnt;
69         struct completion dead;
70         struct ppp_channel chan;        /* interface to generic ppp layer */
71         unsigned char   obuf[OBUFSIZE];
72 };
73
74 /* Bit numbers in xmit_flags */
75 #define XMIT_WAKEUP     0
76 #define XMIT_FULL       1
77 #define XMIT_BUSY       2
78
79 /* State bits */
80 #define SC_TOSS         1
81 #define SC_ESCAPE       2
82 #define SC_PREV_ERROR   4
83
84 /* Bits in rbits */
85 #define SC_RCV_BITS     (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
86
87 static int flag_time = HZ;
88 module_param(flag_time, int, 0);
89 MODULE_PARM_DESC(flag_time, "ppp_async: interval between flagged packets (in clock ticks)");
90 MODULE_LICENSE("GPL");
91 MODULE_ALIAS_LDISC(N_PPP);
92
93 /*
94  * Prototypes.
95  */
96 static int ppp_async_encode(struct asyncppp *ap);
97 static int ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb);
98 static int ppp_async_push(struct asyncppp *ap);
99 static void ppp_async_flush_output(struct asyncppp *ap);
100 static void ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
101                             const char *flags, int count);
102 static int ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd,
103                            unsigned long arg);
104 static void ppp_async_process(struct tasklet_struct *t);
105
106 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
107                            int len, int inbound);
108
109 static const struct ppp_channel_ops async_ops = {
110         .start_xmit = ppp_async_send,
111         .ioctl      = ppp_async_ioctl,
112 };
113
114 /*
115  * Routines implementing the PPP line discipline.
116  */
117
118 /*
119  * We have a potential race on dereferencing tty->disc_data,
120  * because the tty layer provides no locking at all - thus one
121  * cpu could be running ppp_asynctty_receive while another
122  * calls ppp_asynctty_close, which zeroes tty->disc_data and
123  * frees the memory that ppp_asynctty_receive is using.  The best
124  * way to fix this is to use a rwlock in the tty struct, but for now
125  * we use a single global rwlock for all ttys in ppp line discipline.
126  *
127  * FIXME: this is no longer true. The _close path for the ldisc is
128  * now guaranteed to be sane.
129  */
130 static DEFINE_RWLOCK(disc_data_lock);
131
132 static struct asyncppp *ap_get(struct tty_struct *tty)
133 {
134         struct asyncppp *ap;
135
136         read_lock(&disc_data_lock);
137         ap = tty->disc_data;
138         if (ap != NULL)
139                 refcount_inc(&ap->refcnt);
140         read_unlock(&disc_data_lock);
141         return ap;
142 }
143
144 static void ap_put(struct asyncppp *ap)
145 {
146         if (refcount_dec_and_test(&ap->refcnt))
147                 complete(&ap->dead);
148 }
149
150 /*
151  * Called when a tty is put into PPP line discipline. Called in process
152  * context.
153  */
154 static int
155 ppp_asynctty_open(struct tty_struct *tty)
156 {
157         struct asyncppp *ap;
158         int err;
159         int speed;
160
161         if (tty->ops->write == NULL)
162                 return -EOPNOTSUPP;
163
164         err = -ENOMEM;
165         ap = kzalloc(sizeof(*ap), GFP_KERNEL);
166         if (!ap)
167                 goto out;
168
169         /* initialize the asyncppp structure */
170         ap->tty = tty;
171         ap->mru = PPP_MRU;
172         spin_lock_init(&ap->xmit_lock);
173         spin_lock_init(&ap->recv_lock);
174         ap->xaccm[0] = ~0U;
175         ap->xaccm[3] = 0x60000000U;
176         ap->raccm = ~0U;
177         ap->optr = ap->obuf;
178         ap->olim = ap->obuf;
179         ap->lcp_fcs = -1;
180
181         skb_queue_head_init(&ap->rqueue);
182         tasklet_setup(&ap->tsk, ppp_async_process);
183
184         refcount_set(&ap->refcnt, 1);
185         init_completion(&ap->dead);
186
187         ap->chan.private = ap;
188         ap->chan.ops = &async_ops;
189         ap->chan.mtu = PPP_MRU;
190         speed = tty_get_baud_rate(tty);
191         ap->chan.speed = speed;
192         err = ppp_register_channel(&ap->chan);
193         if (err)
194                 goto out_free;
195
196         tty->disc_data = ap;
197         tty->receive_room = 65536;
198         return 0;
199
200  out_free:
201         kfree(ap);
202  out:
203         return err;
204 }
205
206 /*
207  * Called when the tty is put into another line discipline
208  * or it hangs up.  We have to wait for any cpu currently
209  * executing in any of the other ppp_asynctty_* routines to
210  * finish before we can call ppp_unregister_channel and free
211  * the asyncppp struct.  This routine must be called from
212  * process context, not interrupt or softirq context.
213  */
214 static void
215 ppp_asynctty_close(struct tty_struct *tty)
216 {
217         struct asyncppp *ap;
218
219         write_lock_irq(&disc_data_lock);
220         ap = tty->disc_data;
221         tty->disc_data = NULL;
222         write_unlock_irq(&disc_data_lock);
223         if (!ap)
224                 return;
225
226         /*
227          * We have now ensured that nobody can start using ap from now
228          * on, but we have to wait for all existing users to finish.
229          * Note that ppp_unregister_channel ensures that no calls to
230          * our channel ops (i.e. ppp_async_send/ioctl) are in progress
231          * by the time it returns.
232          */
233         if (!refcount_dec_and_test(&ap->refcnt))
234                 wait_for_completion(&ap->dead);
235         tasklet_kill(&ap->tsk);
236
237         ppp_unregister_channel(&ap->chan);
238         kfree_skb(ap->rpkt);
239         skb_queue_purge(&ap->rqueue);
240         kfree_skb(ap->tpkt);
241         kfree(ap);
242 }
243
244 /*
245  * Called on tty hangup in process context.
246  *
247  * Wait for I/O to driver to complete and unregister PPP channel.
248  * This is already done by the close routine, so just call that.
249  */
250 static void ppp_asynctty_hangup(struct tty_struct *tty)
251 {
252         ppp_asynctty_close(tty);
253 }
254
255 /*
256  * Read does nothing - no data is ever available this way.
257  * Pppd reads and writes packets via /dev/ppp instead.
258  */
259 static ssize_t
260 ppp_asynctty_read(struct tty_struct *tty, struct file *file,
261                   unsigned char *buf, size_t count,
262                   void **cookie, unsigned long offset)
263 {
264         return -EAGAIN;
265 }
266
267 /*
268  * Write on the tty does nothing, the packets all come in
269  * from the ppp generic stuff.
270  */
271 static ssize_t
272 ppp_asynctty_write(struct tty_struct *tty, struct file *file,
273                    const unsigned char *buf, size_t count)
274 {
275         return -EAGAIN;
276 }
277
278 /*
279  * Called in process context only. May be re-entered by multiple
280  * ioctl calling threads.
281  */
282
283 static int
284 ppp_asynctty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
285 {
286         struct asyncppp *ap = ap_get(tty);
287         int err, val;
288         int __user *p = (int __user *)arg;
289
290         if (!ap)
291                 return -ENXIO;
292         err = -EFAULT;
293         switch (cmd) {
294         case PPPIOCGCHAN:
295                 err = -EFAULT;
296                 if (put_user(ppp_channel_index(&ap->chan), p))
297                         break;
298                 err = 0;
299                 break;
300
301         case PPPIOCGUNIT:
302                 err = -EFAULT;
303                 if (put_user(ppp_unit_number(&ap->chan), p))
304                         break;
305                 err = 0;
306                 break;
307
308         case TCFLSH:
309                 /* flush our buffers and the serial port's buffer */
310                 if (arg == TCIOFLUSH || arg == TCOFLUSH)
311                         ppp_async_flush_output(ap);
312                 err = n_tty_ioctl_helper(tty, cmd, arg);
313                 break;
314
315         case FIONREAD:
316                 val = 0;
317                 if (put_user(val, p))
318                         break;
319                 err = 0;
320                 break;
321
322         default:
323                 /* Try the various mode ioctls */
324                 err = tty_mode_ioctl(tty, cmd, arg);
325         }
326
327         ap_put(ap);
328         return err;
329 }
330
331 /* No kernel lock - fine */
332 static __poll_t
333 ppp_asynctty_poll(struct tty_struct *tty, struct file *file, poll_table *wait)
334 {
335         return 0;
336 }
337
338 /* May sleep, don't call from interrupt level or with interrupts disabled */
339 static void
340 ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf,
341                   const char *cflags, int count)
342 {
343         struct asyncppp *ap = ap_get(tty);
344         unsigned long flags;
345
346         if (!ap)
347                 return;
348         spin_lock_irqsave(&ap->recv_lock, flags);
349         ppp_async_input(ap, buf, cflags, count);
350         spin_unlock_irqrestore(&ap->recv_lock, flags);
351         if (!skb_queue_empty(&ap->rqueue))
352                 tasklet_schedule(&ap->tsk);
353         ap_put(ap);
354         tty_unthrottle(tty);
355 }
356
357 static void
358 ppp_asynctty_wakeup(struct tty_struct *tty)
359 {
360         struct asyncppp *ap = ap_get(tty);
361
362         clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
363         if (!ap)
364                 return;
365         set_bit(XMIT_WAKEUP, &ap->xmit_flags);
366         tasklet_schedule(&ap->tsk);
367         ap_put(ap);
368 }
369
370
371 static struct tty_ldisc_ops ppp_ldisc = {
372         .owner  = THIS_MODULE,
373         .num    = N_PPP,
374         .name   = "ppp",
375         .open   = ppp_asynctty_open,
376         .close  = ppp_asynctty_close,
377         .hangup = ppp_asynctty_hangup,
378         .read   = ppp_asynctty_read,
379         .write  = ppp_asynctty_write,
380         .ioctl  = ppp_asynctty_ioctl,
381         .poll   = ppp_asynctty_poll,
382         .receive_buf = ppp_asynctty_receive,
383         .write_wakeup = ppp_asynctty_wakeup,
384 };
385
386 static int __init
387 ppp_async_init(void)
388 {
389         int err;
390
391         err = tty_register_ldisc(&ppp_ldisc);
392         if (err != 0)
393                 printk(KERN_ERR "PPP_async: error %d registering line disc.\n",
394                        err);
395         return err;
396 }
397
398 /*
399  * The following routines provide the PPP channel interface.
400  */
401 static int
402 ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd, unsigned long arg)
403 {
404         struct asyncppp *ap = chan->private;
405         void __user *argp = (void __user *)arg;
406         int __user *p = argp;
407         int err, val;
408         u32 accm[8];
409
410         err = -EFAULT;
411         switch (cmd) {
412         case PPPIOCGFLAGS:
413                 val = ap->flags | ap->rbits;
414                 if (put_user(val, p))
415                         break;
416                 err = 0;
417                 break;
418         case PPPIOCSFLAGS:
419                 if (get_user(val, p))
420                         break;
421                 ap->flags = val & ~SC_RCV_BITS;
422                 spin_lock_irq(&ap->recv_lock);
423                 ap->rbits = val & SC_RCV_BITS;
424                 spin_unlock_irq(&ap->recv_lock);
425                 err = 0;
426                 break;
427
428         case PPPIOCGASYNCMAP:
429                 if (put_user(ap->xaccm[0], (u32 __user *)argp))
430                         break;
431                 err = 0;
432                 break;
433         case PPPIOCSASYNCMAP:
434                 if (get_user(ap->xaccm[0], (u32 __user *)argp))
435                         break;
436                 err = 0;
437                 break;
438
439         case PPPIOCGRASYNCMAP:
440                 if (put_user(ap->raccm, (u32 __user *)argp))
441                         break;
442                 err = 0;
443                 break;
444         case PPPIOCSRASYNCMAP:
445                 if (get_user(ap->raccm, (u32 __user *)argp))
446                         break;
447                 err = 0;
448                 break;
449
450         case PPPIOCGXASYNCMAP:
451                 if (copy_to_user(argp, ap->xaccm, sizeof(ap->xaccm)))
452                         break;
453                 err = 0;
454                 break;
455         case PPPIOCSXASYNCMAP:
456                 if (copy_from_user(accm, argp, sizeof(accm)))
457                         break;
458                 accm[2] &= ~0x40000000U;        /* can't escape 0x5e */
459                 accm[3] |= 0x60000000U;         /* must escape 0x7d, 0x7e */
460                 memcpy(ap->xaccm, accm, sizeof(ap->xaccm));
461                 err = 0;
462                 break;
463
464         case PPPIOCGMRU:
465                 if (put_user(ap->mru, p))
466                         break;
467                 err = 0;
468                 break;
469         case PPPIOCSMRU:
470                 if (get_user(val, p))
471                         break;
472                 if (val < PPP_MRU)
473                         val = PPP_MRU;
474                 ap->mru = val;
475                 err = 0;
476                 break;
477
478         default:
479                 err = -ENOTTY;
480         }
481
482         return err;
483 }
484
485 /*
486  * This is called at softirq level to deliver received packets
487  * to the ppp_generic code, and to tell the ppp_generic code
488  * if we can accept more output now.
489  */
490 static void ppp_async_process(struct tasklet_struct *t)
491 {
492         struct asyncppp *ap = from_tasklet(ap, t, tsk);
493         struct sk_buff *skb;
494
495         /* process received packets */
496         while ((skb = skb_dequeue(&ap->rqueue)) != NULL) {
497                 if (skb->cb[0])
498                         ppp_input_error(&ap->chan, 0);
499                 ppp_input(&ap->chan, skb);
500         }
501
502         /* try to push more stuff out */
503         if (test_bit(XMIT_WAKEUP, &ap->xmit_flags) && ppp_async_push(ap))
504                 ppp_output_wakeup(&ap->chan);
505 }
506
507 /*
508  * Procedures for encapsulation and framing.
509  */
510
511 /*
512  * Procedure to encode the data for async serial transmission.
513  * Does octet stuffing (escaping), puts the address/control bytes
514  * on if A/C compression is disabled, and does protocol compression.
515  * Assumes ap->tpkt != 0 on entry.
516  * Returns 1 if we finished the current frame, 0 otherwise.
517  */
518
519 #define PUT_BYTE(ap, buf, c, islcp)     do {            \
520         if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\
521                 *buf++ = PPP_ESCAPE;                    \
522                 *buf++ = c ^ PPP_TRANS;                 \
523         } else                                          \
524                 *buf++ = c;                             \
525 } while (0)
526
527 static int
528 ppp_async_encode(struct asyncppp *ap)
529 {
530         int fcs, i, count, c, proto;
531         unsigned char *buf, *buflim;
532         unsigned char *data;
533         int islcp;
534
535         buf = ap->obuf;
536         ap->olim = buf;
537         ap->optr = buf;
538         i = ap->tpkt_pos;
539         data = ap->tpkt->data;
540         count = ap->tpkt->len;
541         fcs = ap->tfcs;
542         proto = get_unaligned_be16(data);
543
544         /*
545          * LCP packets with code values between 1 (configure-reqest)
546          * and 7 (code-reject) must be sent as though no options
547          * had been negotiated.
548          */
549         islcp = proto == PPP_LCP && 1 <= data[2] && data[2] <= 7;
550
551         if (i == 0) {
552                 if (islcp)
553                         async_lcp_peek(ap, data, count, 0);
554
555                 /*
556                  * Start of a new packet - insert the leading FLAG
557                  * character if necessary.
558                  */
559                 if (islcp || flag_time == 0 ||
560                     time_after_eq(jiffies, ap->last_xmit + flag_time))
561                         *buf++ = PPP_FLAG;
562                 ap->last_xmit = jiffies;
563                 fcs = PPP_INITFCS;
564
565                 /*
566                  * Put in the address/control bytes if necessary
567                  */
568                 if ((ap->flags & SC_COMP_AC) == 0 || islcp) {
569                         PUT_BYTE(ap, buf, 0xff, islcp);
570                         fcs = PPP_FCS(fcs, 0xff);
571                         PUT_BYTE(ap, buf, 0x03, islcp);
572                         fcs = PPP_FCS(fcs, 0x03);
573                 }
574         }
575
576         /*
577          * Once we put in the last byte, we need to put in the FCS
578          * and closing flag, so make sure there is at least 7 bytes
579          * of free space in the output buffer.
580          */
581         buflim = ap->obuf + OBUFSIZE - 6;
582         while (i < count && buf < buflim) {
583                 c = data[i++];
584                 if (i == 1 && c == 0 && (ap->flags & SC_COMP_PROT))
585                         continue;       /* compress protocol field */
586                 fcs = PPP_FCS(fcs, c);
587                 PUT_BYTE(ap, buf, c, islcp);
588         }
589
590         if (i < count) {
591                 /*
592                  * Remember where we are up to in this packet.
593                  */
594                 ap->olim = buf;
595                 ap->tpkt_pos = i;
596                 ap->tfcs = fcs;
597                 return 0;
598         }
599
600         /*
601          * We have finished the packet.  Add the FCS and flag.
602          */
603         fcs = ~fcs;
604         c = fcs & 0xff;
605         PUT_BYTE(ap, buf, c, islcp);
606         c = (fcs >> 8) & 0xff;
607         PUT_BYTE(ap, buf, c, islcp);
608         *buf++ = PPP_FLAG;
609         ap->olim = buf;
610
611         consume_skb(ap->tpkt);
612         ap->tpkt = NULL;
613         return 1;
614 }
615
616 /*
617  * Transmit-side routines.
618  */
619
620 /*
621  * Send a packet to the peer over an async tty line.
622  * Returns 1 iff the packet was accepted.
623  * If the packet was not accepted, we will call ppp_output_wakeup
624  * at some later time.
625  */
626 static int
627 ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb)
628 {
629         struct asyncppp *ap = chan->private;
630
631         ppp_async_push(ap);
632
633         if (test_and_set_bit(XMIT_FULL, &ap->xmit_flags))
634                 return 0;       /* already full */
635         ap->tpkt = skb;
636         ap->tpkt_pos = 0;
637
638         ppp_async_push(ap);
639         return 1;
640 }
641
642 /*
643  * Push as much data as possible out to the tty.
644  */
645 static int
646 ppp_async_push(struct asyncppp *ap)
647 {
648         int avail, sent, done = 0;
649         struct tty_struct *tty = ap->tty;
650         int tty_stuffed = 0;
651
652         /*
653          * We can get called recursively here if the tty write
654          * function calls our wakeup function.  This can happen
655          * for example on a pty with both the master and slave
656          * set to PPP line discipline.
657          * We use the XMIT_BUSY bit to detect this and get out,
658          * leaving the XMIT_WAKEUP bit set to tell the other
659          * instance that it may now be able to write more now.
660          */
661         if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
662                 return 0;
663         spin_lock_bh(&ap->xmit_lock);
664         for (;;) {
665                 if (test_and_clear_bit(XMIT_WAKEUP, &ap->xmit_flags))
666                         tty_stuffed = 0;
667                 if (!tty_stuffed && ap->optr < ap->olim) {
668                         avail = ap->olim - ap->optr;
669                         set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
670                         sent = tty->ops->write(tty, ap->optr, avail);
671                         if (sent < 0)
672                                 goto flush;     /* error, e.g. loss of CD */
673                         ap->optr += sent;
674                         if (sent < avail)
675                                 tty_stuffed = 1;
676                         continue;
677                 }
678                 if (ap->optr >= ap->olim && ap->tpkt) {
679                         if (ppp_async_encode(ap)) {
680                                 /* finished processing ap->tpkt */
681                                 clear_bit(XMIT_FULL, &ap->xmit_flags);
682                                 done = 1;
683                         }
684                         continue;
685                 }
686                 /*
687                  * We haven't made any progress this time around.
688                  * Clear XMIT_BUSY to let other callers in, but
689                  * after doing so we have to check if anyone set
690                  * XMIT_WAKEUP since we last checked it.  If they
691                  * did, we should try again to set XMIT_BUSY and go
692                  * around again in case XMIT_BUSY was still set when
693                  * the other caller tried.
694                  */
695                 clear_bit(XMIT_BUSY, &ap->xmit_flags);
696                 /* any more work to do? if not, exit the loop */
697                 if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags) ||
698                       (!tty_stuffed && ap->tpkt)))
699                         break;
700                 /* more work to do, see if we can do it now */
701                 if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
702                         break;
703         }
704         spin_unlock_bh(&ap->xmit_lock);
705         return done;
706
707 flush:
708         clear_bit(XMIT_BUSY, &ap->xmit_flags);
709         if (ap->tpkt) {
710                 kfree_skb(ap->tpkt);
711                 ap->tpkt = NULL;
712                 clear_bit(XMIT_FULL, &ap->xmit_flags);
713                 done = 1;
714         }
715         ap->optr = ap->olim;
716         spin_unlock_bh(&ap->xmit_lock);
717         return done;
718 }
719
720 /*
721  * Flush output from our internal buffers.
722  * Called for the TCFLSH ioctl. Can be entered in parallel
723  * but this is covered by the xmit_lock.
724  */
725 static void
726 ppp_async_flush_output(struct asyncppp *ap)
727 {
728         int done = 0;
729
730         spin_lock_bh(&ap->xmit_lock);
731         ap->optr = ap->olim;
732         if (ap->tpkt != NULL) {
733                 kfree_skb(ap->tpkt);
734                 ap->tpkt = NULL;
735                 clear_bit(XMIT_FULL, &ap->xmit_flags);
736                 done = 1;
737         }
738         spin_unlock_bh(&ap->xmit_lock);
739         if (done)
740                 ppp_output_wakeup(&ap->chan);
741 }
742
743 /*
744  * Receive-side routines.
745  */
746
747 /* see how many ordinary chars there are at the start of buf */
748 static inline int
749 scan_ordinary(struct asyncppp *ap, const unsigned char *buf, int count)
750 {
751         int i, c;
752
753         for (i = 0; i < count; ++i) {
754                 c = buf[i];
755                 if (c == PPP_ESCAPE || c == PPP_FLAG ||
756                     (c < 0x20 && (ap->raccm & (1 << c)) != 0))
757                         break;
758         }
759         return i;
760 }
761
762 /* called when a flag is seen - do end-of-packet processing */
763 static void
764 process_input_packet(struct asyncppp *ap)
765 {
766         struct sk_buff *skb;
767         unsigned char *p;
768         unsigned int len, fcs;
769
770         skb = ap->rpkt;
771         if (ap->state & (SC_TOSS | SC_ESCAPE))
772                 goto err;
773
774         if (skb == NULL)
775                 return;         /* 0-length packet */
776
777         /* check the FCS */
778         p = skb->data;
779         len = skb->len;
780         if (len < 3)
781                 goto err;       /* too short */
782         fcs = PPP_INITFCS;
783         for (; len > 0; --len)
784                 fcs = PPP_FCS(fcs, *p++);
785         if (fcs != PPP_GOODFCS)
786                 goto err;       /* bad FCS */
787         skb_trim(skb, skb->len - 2);
788
789         /* check for address/control and protocol compression */
790         p = skb->data;
791         if (p[0] == PPP_ALLSTATIONS) {
792                 /* chop off address/control */
793                 if (p[1] != PPP_UI || skb->len < 3)
794                         goto err;
795                 p = skb_pull(skb, 2);
796         }
797
798         /* If protocol field is not compressed, it can be LCP packet */
799         if (!(p[0] & 0x01)) {
800                 unsigned int proto;
801
802                 if (skb->len < 2)
803                         goto err;
804                 proto = (p[0] << 8) + p[1];
805                 if (proto == PPP_LCP)
806                         async_lcp_peek(ap, p, skb->len, 1);
807         }
808
809         /* queue the frame to be processed */
810         skb->cb[0] = ap->state;
811         skb_queue_tail(&ap->rqueue, skb);
812         ap->rpkt = NULL;
813         ap->state = 0;
814         return;
815
816  err:
817         /* frame had an error, remember that, reset SC_TOSS & SC_ESCAPE */
818         ap->state = SC_PREV_ERROR;
819         if (skb) {
820                 /* make skb appear as freshly allocated */
821                 skb_trim(skb, 0);
822                 skb_reserve(skb, - skb_headroom(skb));
823         }
824 }
825
826 /* Called when the tty driver has data for us. Runs parallel with the
827    other ldisc functions but will not be re-entered */
828
829 static void
830 ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
831                 const char *flags, int count)
832 {
833         struct sk_buff *skb;
834         int c, i, j, n, s, f;
835         unsigned char *sp;
836
837         /* update bits used for 8-bit cleanness detection */
838         if (~ap->rbits & SC_RCV_BITS) {
839                 s = 0;
840                 for (i = 0; i < count; ++i) {
841                         c = buf[i];
842                         if (flags && flags[i] != 0)
843                                 continue;
844                         s |= (c & 0x80)? SC_RCV_B7_1: SC_RCV_B7_0;
845                         c = ((c >> 4) ^ c) & 0xf;
846                         s |= (0x6996 & (1 << c))? SC_RCV_ODDP: SC_RCV_EVNP;
847                 }
848                 ap->rbits |= s;
849         }
850
851         while (count > 0) {
852                 /* scan through and see how many chars we can do in bulk */
853                 if ((ap->state & SC_ESCAPE) && buf[0] == PPP_ESCAPE)
854                         n = 1;
855                 else
856                         n = scan_ordinary(ap, buf, count);
857
858                 f = 0;
859                 if (flags && (ap->state & SC_TOSS) == 0) {
860                         /* check the flags to see if any char had an error */
861                         for (j = 0; j < n; ++j)
862                                 if ((f = flags[j]) != 0)
863                                         break;
864                 }
865                 if (f != 0) {
866                         /* start tossing */
867                         ap->state |= SC_TOSS;
868
869                 } else if (n > 0 && (ap->state & SC_TOSS) == 0) {
870                         /* stuff the chars in the skb */
871                         skb = ap->rpkt;
872                         if (!skb) {
873                                 skb = dev_alloc_skb(ap->mru + PPP_HDRLEN + 2);
874                                 if (!skb)
875                                         goto nomem;
876                                 ap->rpkt = skb;
877                         }
878                         if (skb->len == 0) {
879                                 /* Try to get the payload 4-byte aligned.
880                                  * This should match the
881                                  * PPP_ALLSTATIONS/PPP_UI/compressed tests in
882                                  * process_input_packet, but we do not have
883                                  * enough chars here to test buf[1] and buf[2].
884                                  */
885                                 if (buf[0] != PPP_ALLSTATIONS)
886                                         skb_reserve(skb, 2 + (buf[0] & 1));
887                         }
888                         if (n > skb_tailroom(skb)) {
889                                 /* packet overflowed MRU */
890                                 ap->state |= SC_TOSS;
891                         } else {
892                                 sp = skb_put_data(skb, buf, n);
893                                 if (ap->state & SC_ESCAPE) {
894                                         sp[0] ^= PPP_TRANS;
895                                         ap->state &= ~SC_ESCAPE;
896                                 }
897                         }
898                 }
899
900                 if (n >= count)
901                         break;
902
903                 c = buf[n];
904                 if (flags != NULL && flags[n] != 0) {
905                         ap->state |= SC_TOSS;
906                 } else if (c == PPP_FLAG) {
907                         process_input_packet(ap);
908                 } else if (c == PPP_ESCAPE) {
909                         ap->state |= SC_ESCAPE;
910                 } else if (I_IXON(ap->tty)) {
911                         if (c == START_CHAR(ap->tty))
912                                 start_tty(ap->tty);
913                         else if (c == STOP_CHAR(ap->tty))
914                                 stop_tty(ap->tty);
915                 }
916                 /* otherwise it's a char in the recv ACCM */
917                 ++n;
918
919                 buf += n;
920                 if (flags)
921                         flags += n;
922                 count -= n;
923         }
924         return;
925
926  nomem:
927         printk(KERN_ERR "PPPasync: no memory (input pkt)\n");
928         ap->state |= SC_TOSS;
929 }
930
931 /*
932  * We look at LCP frames going past so that we can notice
933  * and react to the LCP configure-ack from the peer.
934  * In the situation where the peer has been sent a configure-ack
935  * already, LCP is up once it has sent its configure-ack
936  * so the immediately following packet can be sent with the
937  * configured LCP options.  This allows us to process the following
938  * packet correctly without pppd needing to respond quickly.
939  *
940  * We only respond to the received configure-ack if we have just
941  * sent a configure-request, and the configure-ack contains the
942  * same data (this is checked using a 16-bit crc of the data).
943  */
944 #define CONFREQ         1       /* LCP code field values */
945 #define CONFACK         2
946 #define LCP_MRU         1       /* LCP option numbers */
947 #define LCP_ASYNCMAP    2
948
949 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
950                            int len, int inbound)
951 {
952         int dlen, fcs, i, code;
953         u32 val;
954
955         data += 2;              /* skip protocol bytes */
956         len -= 2;
957         if (len < 4)            /* 4 = code, ID, length */
958                 return;
959         code = data[0];
960         if (code != CONFACK && code != CONFREQ)
961                 return;
962         dlen = get_unaligned_be16(data + 2);
963         if (len < dlen)
964                 return;         /* packet got truncated or length is bogus */
965
966         if (code == (inbound? CONFACK: CONFREQ)) {
967                 /*
968                  * sent confreq or received confack:
969                  * calculate the crc of the data from the ID field on.
970                  */
971                 fcs = PPP_INITFCS;
972                 for (i = 1; i < dlen; ++i)
973                         fcs = PPP_FCS(fcs, data[i]);
974
975                 if (!inbound) {
976                         /* outbound confreq - remember the crc for later */
977                         ap->lcp_fcs = fcs;
978                         return;
979                 }
980
981                 /* received confack, check the crc */
982                 fcs ^= ap->lcp_fcs;
983                 ap->lcp_fcs = -1;
984                 if (fcs != 0)
985                         return;
986         } else if (inbound)
987                 return; /* not interested in received confreq */
988
989         /* process the options in the confack */
990         data += 4;
991         dlen -= 4;
992         /* data[0] is code, data[1] is length */
993         while (dlen >= 2 && dlen >= data[1] && data[1] >= 2) {
994                 switch (data[0]) {
995                 case LCP_MRU:
996                         val = get_unaligned_be16(data + 2);
997                         if (inbound)
998                                 ap->mru = val;
999                         else
1000                                 ap->chan.mtu = val;
1001                         break;
1002                 case LCP_ASYNCMAP:
1003                         val = get_unaligned_be32(data + 2);
1004                         if (inbound)
1005                                 ap->raccm = val;
1006                         else
1007                                 ap->xaccm[0] = val;
1008                         break;
1009                 }
1010                 dlen -= data[1];
1011                 data += data[1];
1012         }
1013 }
1014
1015 static void __exit ppp_async_cleanup(void)
1016 {
1017         tty_unregister_ldisc(&ppp_ldisc);
1018 }
1019
1020 module_init(ppp_async_init);
1021 module_exit(ppp_async_cleanup);