Merge branch 'topic/midi20' into for-linus
[linux-block.git] / drivers / net / ethernet / smsc / smc91c92_cs.c
1 /*======================================================================
2
3     A PCMCIA ethernet driver for SMC91c92-based cards.
4
5     This driver supports Megahertz PCMCIA ethernet cards; and
6     Megahertz, Motorola, Ositech, and Psion Dacom ethernet/modem
7     multifunction cards.
8
9     Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
10
11     smc91c92_cs.c 1.122 2002/10/25 06:26:39
12
13     This driver contains code written by Donald Becker
14     (becker@scyld.com), Rowan Hughes (x-csrdh@jcu.edu.au),
15     David Hinds (dahinds@users.sourceforge.net), and Erik Stahlman
16     (erik@vt.edu).  Donald wrote the SMC 91c92 code using parts of
17     Erik's SMC 91c94 driver.  Rowan wrote a similar driver, and I've
18     incorporated some parts of his driver here.  I (Dave) wrote most
19     of the PCMCIA glue code, and the Ositech support code.  Kelly
20     Stephens (kstephen@holli.com) added support for the Motorola
21     Mariner, with help from Allen Brost.
22
23     This software may be used and distributed according to the terms of
24     the GNU General Public License, incorporated herein by reference.
25
26 ======================================================================*/
27
28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
29
30 #include <linux/module.h>
31 #include <linux/kernel.h>
32 #include <linux/slab.h>
33 #include <linux/string.h>
34 #include <linux/timer.h>
35 #include <linux/interrupt.h>
36 #include <linux/delay.h>
37 #include <linux/crc32.h>
38 #include <linux/netdevice.h>
39 #include <linux/etherdevice.h>
40 #include <linux/skbuff.h>
41 #include <linux/if_arp.h>
42 #include <linux/ioport.h>
43 #include <linux/ethtool.h>
44 #include <linux/mii.h>
45 #include <linux/jiffies.h>
46 #include <linux/firmware.h>
47
48 #include <pcmcia/cistpl.h>
49 #include <pcmcia/cisreg.h>
50 #include <pcmcia/ciscode.h>
51 #include <pcmcia/ds.h>
52 #include <pcmcia/ss.h>
53
54 #include <asm/io.h>
55 #include <linux/uaccess.h>
56
57 /*====================================================================*/
58
59 static const char *if_names[] = { "auto", "10baseT", "10base2"};
60
61 /* Firmware name */
62 #define FIRMWARE_NAME           "ositech/Xilinx7OD.bin"
63
64 /* Module parameters */
65
66 MODULE_DESCRIPTION("SMC 91c92 series PCMCIA ethernet driver");
67 MODULE_LICENSE("GPL");
68 MODULE_FIRMWARE(FIRMWARE_NAME);
69
70 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
71
72 /*
73   Transceiver/media type.
74    0 = auto
75    1 = 10baseT (and autoselect if #define AUTOSELECT),
76    2 = AUI/10base2,
77 */
78 INT_MODULE_PARM(if_port, 0);
79
80
81 #define DRV_NAME        "smc91c92_cs"
82 #define DRV_VERSION     "1.123"
83
84 /*====================================================================*/
85
86 /* Operational parameter that usually are not changed. */
87
88 /* Time in jiffies before concluding Tx hung */
89 #define TX_TIMEOUT              ((400*HZ)/1000)
90
91 /* Maximum events (Rx packets, etc.) to handle at each interrupt. */
92 #define INTR_WORK               4
93
94 /* Times to check the check the chip before concluding that it doesn't
95    currently have room for another Tx packet. */
96 #define MEMORY_WAIT_TIME        8
97
98 struct smc_private {
99         struct pcmcia_device    *p_dev;
100     spinlock_t                  lock;
101     u_short                     manfid;
102     u_short                     cardid;
103
104     struct sk_buff              *saved_skb;
105     int                         packets_waiting;
106     void                        __iomem *base;
107     u_short                     cfg;
108     struct timer_list           media;
109     int                         watchdog, tx_err;
110     u_short                     media_status;
111     u_short                     fast_poll;
112     u_short                     link_status;
113     struct mii_if_info          mii_if;
114     int                         duplex;
115     int                         rx_ovrn;
116     unsigned long               last_rx;
117 };
118
119 /* Special definitions for Megahertz multifunction cards */
120 #define MEGAHERTZ_ISR           0x0380
121
122 /* Special function registers for Motorola Mariner */
123 #define MOT_LAN                 0x0000
124 #define MOT_UART                0x0020
125 #define MOT_EEPROM              0x20
126
127 #define MOT_NORMAL \
128 (COR_LEVEL_REQ | COR_FUNC_ENA | COR_ADDR_DECODE | COR_IREQ_ENA)
129
130 /* Special function registers for Ositech cards */
131 #define OSITECH_AUI_CTL         0x0c
132 #define OSITECH_PWRDOWN         0x0d
133 #define OSITECH_RESET           0x0e
134 #define OSITECH_ISR             0x0f
135 #define OSITECH_AUI_PWR         0x0c
136 #define OSITECH_RESET_ISR       0x0e
137
138 #define OSI_AUI_PWR             0x40
139 #define OSI_LAN_PWRDOWN         0x02
140 #define OSI_MODEM_PWRDOWN       0x01
141 #define OSI_LAN_RESET           0x02
142 #define OSI_MODEM_RESET         0x01
143
144 /* Symbolic constants for the SMC91c9* series chips, from Erik Stahlman. */
145 #define BANK_SELECT             14              /* Window select register. */
146 #define SMC_SELECT_BANK(x)  { outw(x, ioaddr + BANK_SELECT); }
147
148 /* Bank 0 registers. */
149 #define TCR             0       /* transmit control register */
150 #define  TCR_CLEAR      0       /* do NOTHING */
151 #define  TCR_ENABLE     0x0001  /* if this is 1, we can transmit */
152 #define  TCR_PAD_EN     0x0080  /* pads short packets to 64 bytes */
153 #define  TCR_MONCSN     0x0400  /* Monitor Carrier. */
154 #define  TCR_FDUPLX     0x0800  /* Full duplex mode. */
155 #define  TCR_NORMAL TCR_ENABLE | TCR_PAD_EN
156
157 #define EPH             2       /* Ethernet Protocol Handler report. */
158 #define  EPH_TX_SUC     0x0001
159 #define  EPH_SNGLCOL    0x0002
160 #define  EPH_MULCOL     0x0004
161 #define  EPH_LTX_MULT   0x0008
162 #define  EPH_16COL      0x0010
163 #define  EPH_SQET       0x0020
164 #define  EPH_LTX_BRD    0x0040
165 #define  EPH_TX_DEFR    0x0080
166 #define  EPH_LAT_COL    0x0200
167 #define  EPH_LOST_CAR   0x0400
168 #define  EPH_EXC_DEF    0x0800
169 #define  EPH_CTR_ROL    0x1000
170 #define  EPH_RX_OVRN    0x2000
171 #define  EPH_LINK_OK    0x4000
172 #define  EPH_TX_UNRN    0x8000
173 #define MEMINFO         8       /* Memory Information Register */
174 #define MEMCFG          10      /* Memory Configuration Register */
175
176 /* Bank 1 registers. */
177 #define CONFIG                  0
178 #define  CFG_MII_SELECT         0x8000  /* 91C100 only */
179 #define  CFG_NO_WAIT            0x1000
180 #define  CFG_FULL_STEP          0x0400
181 #define  CFG_SET_SQLCH          0x0200
182 #define  CFG_AUI_SELECT         0x0100
183 #define  CFG_16BIT              0x0080
184 #define  CFG_DIS_LINK           0x0040
185 #define  CFG_STATIC             0x0030
186 #define  CFG_IRQ_SEL_1          0x0004
187 #define  CFG_IRQ_SEL_0          0x0002
188 #define BASE_ADDR               2
189 #define ADDR0                   4
190 #define GENERAL                 10
191 #define CONTROL                 12
192 #define  CTL_STORE              0x0001
193 #define  CTL_RELOAD             0x0002
194 #define  CTL_EE_SELECT          0x0004
195 #define  CTL_TE_ENABLE          0x0020
196 #define  CTL_CR_ENABLE          0x0040
197 #define  CTL_LE_ENABLE          0x0080
198 #define  CTL_AUTO_RELEASE       0x0800
199 #define  CTL_POWERDOWN          0x2000
200
201 /* Bank 2 registers. */
202 #define MMU_CMD         0
203 #define  MC_ALLOC       0x20    /* or with number of 256 byte packets */
204 #define  MC_RESET       0x40
205 #define  MC_RELEASE     0x80    /* remove and release the current rx packet */
206 #define  MC_FREEPKT     0xA0    /* Release packet in PNR register */
207 #define  MC_ENQUEUE     0xC0    /* Enqueue the packet for transmit */
208 #define PNR_ARR         2
209 #define FIFO_PORTS      4
210 #define  FP_RXEMPTY     0x8000
211 #define POINTER         6
212 #define  PTR_AUTO_INC   0x0040
213 #define  PTR_READ       0x2000
214 #define  PTR_AUTOINC    0x4000
215 #define  PTR_RCV        0x8000
216 #define DATA_1          8
217 #define INTERRUPT       12
218 #define  IM_RCV_INT             0x1
219 #define  IM_TX_INT              0x2
220 #define  IM_TX_EMPTY_INT        0x4
221 #define  IM_ALLOC_INT           0x8
222 #define  IM_RX_OVRN_INT         0x10
223 #define  IM_EPH_INT             0x20
224
225 #define RCR             4
226 enum RxCfg { RxAllMulti = 0x0004, RxPromisc = 0x0002,
227              RxEnable = 0x0100, RxStripCRC = 0x0200};
228 #define  RCR_SOFTRESET  0x8000  /* resets the chip */
229 #define  RCR_STRIP_CRC  0x200   /* strips CRC */
230 #define  RCR_ENABLE     0x100   /* IFF this is set, we can receive packets */
231 #define  RCR_ALMUL      0x4     /* receive all multicast packets */
232 #define  RCR_PROMISC    0x2     /* enable promiscuous mode */
233
234 /* the normal settings for the RCR register : */
235 #define  RCR_NORMAL     (RCR_STRIP_CRC | RCR_ENABLE)
236 #define  RCR_CLEAR      0x0             /* set it to a base state */
237 #define COUNTER         6
238
239 /* BANK 3 -- not the same values as in smc9194! */
240 #define MULTICAST0      0
241 #define MULTICAST2      2
242 #define MULTICAST4      4
243 #define MULTICAST6      6
244 #define MGMT            8
245 #define REVISION        0x0a
246
247 /* Transmit status bits. */
248 #define TS_SUCCESS 0x0001
249 #define TS_16COL   0x0010
250 #define TS_LATCOL  0x0200
251 #define TS_LOSTCAR 0x0400
252
253 /* Receive status bits. */
254 #define RS_ALGNERR      0x8000
255 #define RS_BADCRC       0x2000
256 #define RS_ODDFRAME     0x1000
257 #define RS_TOOLONG      0x0800
258 #define RS_TOOSHORT     0x0400
259 #define RS_MULTICAST    0x0001
260 #define RS_ERRORS       (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
261
262 #define set_bits(v, p) outw(inw(p)|(v), (p))
263 #define mask_bits(v, p) outw(inw(p)&(v), (p))
264
265 /*====================================================================*/
266
267 static void smc91c92_detach(struct pcmcia_device *p_dev);
268 static int smc91c92_config(struct pcmcia_device *link);
269 static void smc91c92_release(struct pcmcia_device *link);
270
271 static int smc_open(struct net_device *dev);
272 static int smc_close(struct net_device *dev);
273 static int smc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
274 static void smc_tx_timeout(struct net_device *dev, unsigned int txqueue);
275 static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
276                                         struct net_device *dev);
277 static irqreturn_t smc_interrupt(int irq, void *dev_id);
278 static void smc_rx(struct net_device *dev);
279 static void set_rx_mode(struct net_device *dev);
280 static int s9k_config(struct net_device *dev, struct ifmap *map);
281 static void smc_set_xcvr(struct net_device *dev, int if_port);
282 static void smc_reset(struct net_device *dev);
283 static void media_check(struct timer_list *t);
284 static void mdio_sync(unsigned int addr);
285 static int mdio_read(struct net_device *dev, int phy_id, int loc);
286 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value);
287 static int smc_link_ok(struct net_device *dev);
288 static const struct ethtool_ops ethtool_ops;
289
290 static const struct net_device_ops smc_netdev_ops = {
291         .ndo_open               = smc_open,
292         .ndo_stop               = smc_close,
293         .ndo_start_xmit         = smc_start_xmit,
294         .ndo_tx_timeout         = smc_tx_timeout,
295         .ndo_set_config         = s9k_config,
296         .ndo_set_rx_mode        = set_rx_mode,
297         .ndo_eth_ioctl          = smc_ioctl,
298         .ndo_set_mac_address    = eth_mac_addr,
299         .ndo_validate_addr      = eth_validate_addr,
300 };
301
302 static int smc91c92_probe(struct pcmcia_device *link)
303 {
304     struct smc_private *smc;
305     struct net_device *dev;
306
307     dev_dbg(&link->dev, "smc91c92_attach()\n");
308
309     /* Create new ethernet device */
310     dev = alloc_etherdev(sizeof(struct smc_private));
311     if (!dev)
312         return -ENOMEM;
313     smc = netdev_priv(dev);
314     smc->p_dev = link;
315     link->priv = dev;
316
317     spin_lock_init(&smc->lock);
318
319     /* The SMC91c92-specific entries in the device structure. */
320     dev->netdev_ops = &smc_netdev_ops;
321     dev->ethtool_ops = &ethtool_ops;
322     dev->watchdog_timeo = TX_TIMEOUT;
323
324     smc->mii_if.dev = dev;
325     smc->mii_if.mdio_read = mdio_read;
326     smc->mii_if.mdio_write = mdio_write;
327     smc->mii_if.phy_id_mask = 0x1f;
328     smc->mii_if.reg_num_mask = 0x1f;
329
330     return smc91c92_config(link);
331 } /* smc91c92_attach */
332
333 static void smc91c92_detach(struct pcmcia_device *link)
334 {
335     struct net_device *dev = link->priv;
336
337     dev_dbg(&link->dev, "smc91c92_detach\n");
338
339     unregister_netdev(dev);
340
341     smc91c92_release(link);
342
343     free_netdev(dev);
344 } /* smc91c92_detach */
345
346 /*====================================================================*/
347
348 static int cvt_ascii_address(struct net_device *dev, char *s)
349 {
350     u8 mac[ETH_ALEN];
351     int i, j, da, c;
352
353     if (strlen(s) != 12)
354         return -1;
355     for (i = 0; i < 6; i++) {
356         da = 0;
357         for (j = 0; j < 2; j++) {
358             c = *s++;
359             da <<= 4;
360             da += ((c >= '0') && (c <= '9')) ?
361                 (c - '0') : ((c & 0x0f) + 9);
362         }
363         mac[i] = da;
364     }
365     eth_hw_addr_set(dev, mac);
366     return 0;
367 }
368
369 /*====================================================================
370
371     Configuration stuff for Megahertz cards
372
373     mhz_3288_power() is used to power up a 3288's ethernet chip.
374     mhz_mfc_config() handles socket setup for multifunction (1144
375     and 3288) cards.  mhz_setup() gets a card's hardware ethernet
376     address.
377
378 ======================================================================*/
379
380 static int mhz_3288_power(struct pcmcia_device *link)
381 {
382     struct net_device *dev = link->priv;
383     struct smc_private *smc = netdev_priv(dev);
384     u_char tmp;
385
386     /* Read the ISR twice... */
387     readb(smc->base+MEGAHERTZ_ISR);
388     udelay(5);
389     readb(smc->base+MEGAHERTZ_ISR);
390
391     /* Pause 200ms... */
392     mdelay(200);
393
394     /* Now read and write the COR... */
395     tmp = readb(smc->base + link->config_base + CISREG_COR);
396     udelay(5);
397     writeb(tmp, smc->base + link->config_base + CISREG_COR);
398
399     return 0;
400 }
401
402 static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data)
403 {
404         int k;
405         p_dev->io_lines = 16;
406         p_dev->resource[1]->start = p_dev->resource[0]->start;
407         p_dev->resource[1]->end = 8;
408         p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
409         p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
410         p_dev->resource[0]->end = 16;
411         p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
412         p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
413         for (k = 0; k < 0x400; k += 0x10) {
414                 if (k & 0x80)
415                         continue;
416                 p_dev->resource[0]->start = k ^ 0x300;
417                 if (!pcmcia_request_io(p_dev))
418                         return 0;
419         }
420         return -ENODEV;
421 }
422
423 static int mhz_mfc_config(struct pcmcia_device *link)
424 {
425     struct net_device *dev = link->priv;
426     struct smc_private *smc = netdev_priv(dev);
427     unsigned int offset;
428     int i;
429
430     link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ |
431             CONF_AUTO_SET_IO;
432
433     /* The Megahertz combo cards have modem-like CIS entries, so
434        we have to explicitly try a bunch of port combinations. */
435     if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
436             return -ENODEV;
437
438     dev->base_addr = link->resource[0]->start;
439
440     /* Allocate a memory window, for accessing the ISR */
441     link->resource[2]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
442     link->resource[2]->start = link->resource[2]->end = 0;
443     i = pcmcia_request_window(link, link->resource[2], 0);
444     if (i != 0)
445             return -ENODEV;
446
447     smc->base = ioremap(link->resource[2]->start,
448                     resource_size(link->resource[2]));
449     offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0;
450     i = pcmcia_map_mem_page(link, link->resource[2], offset);
451     if ((i == 0) &&
452         (smc->manfid == MANFID_MEGAHERTZ) &&
453         (smc->cardid == PRODID_MEGAHERTZ_EM3288))
454             mhz_3288_power(link);
455
456     return 0;
457 }
458
459 static int pcmcia_get_versmac(struct pcmcia_device *p_dev,
460                               tuple_t *tuple,
461                               void *priv)
462 {
463         struct net_device *dev = priv;
464         cisparse_t parse;
465         u8 *buf;
466
467         if (pcmcia_parse_tuple(tuple, &parse))
468                 return -EINVAL;
469
470         buf = parse.version_1.str + parse.version_1.ofs[3];
471
472         if ((parse.version_1.ns > 3) && (cvt_ascii_address(dev, buf) == 0))
473                 return 0;
474
475         return -EINVAL;
476 };
477
478 static int mhz_setup(struct pcmcia_device *link)
479 {
480     struct net_device *dev = link->priv;
481     size_t len;
482     u8 *buf;
483     int rc;
484
485     /* Read the station address from the CIS.  It is stored as the last
486        (fourth) string in the Version 1 Version/ID tuple. */
487     if ((link->prod_id[3]) &&
488         (cvt_ascii_address(dev, link->prod_id[3]) == 0))
489             return 0;
490
491     /* Workarounds for broken cards start here. */
492     /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
493     if (!pcmcia_loop_tuple(link, CISTPL_VERS_1, pcmcia_get_versmac, dev))
494             return 0;
495
496     /* Another possibility: for the EM3288, in a special tuple */
497     rc = -1;
498     len = pcmcia_get_tuple(link, 0x81, &buf);
499     if (buf && len >= 13) {
500             buf[12] = '\0';
501             if (cvt_ascii_address(dev, buf) == 0)
502                     rc = 0;
503     }
504     kfree(buf);
505
506     return rc;
507 };
508
509 /*======================================================================
510
511     Configuration stuff for the Motorola Mariner
512
513     mot_config() writes directly to the Mariner configuration
514     registers because the CIS is just bogus.
515
516 ======================================================================*/
517
518 static void mot_config(struct pcmcia_device *link)
519 {
520     struct net_device *dev = link->priv;
521     struct smc_private *smc = netdev_priv(dev);
522     unsigned int ioaddr = dev->base_addr;
523     unsigned int iouart = link->resource[1]->start;
524
525     /* Set UART base address and force map with COR bit 1 */
526     writeb(iouart & 0xff,        smc->base + MOT_UART + CISREG_IOBASE_0);
527     writeb((iouart >> 8) & 0xff, smc->base + MOT_UART + CISREG_IOBASE_1);
528     writeb(MOT_NORMAL,           smc->base + MOT_UART + CISREG_COR);
529
530     /* Set SMC base address and force map with COR bit 1 */
531     writeb(ioaddr & 0xff,        smc->base + MOT_LAN + CISREG_IOBASE_0);
532     writeb((ioaddr >> 8) & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_1);
533     writeb(MOT_NORMAL,           smc->base + MOT_LAN + CISREG_COR);
534
535     /* Wait for things to settle down */
536     mdelay(100);
537 }
538
539 static int mot_setup(struct pcmcia_device *link)
540 {
541     struct net_device *dev = link->priv;
542     unsigned int ioaddr = dev->base_addr;
543     int i, wait, loop;
544     u8 mac[ETH_ALEN];
545     u_int addr;
546
547     /* Read Ethernet address from Serial EEPROM */
548
549     for (i = 0; i < 3; i++) {
550         SMC_SELECT_BANK(2);
551         outw(MOT_EEPROM + i, ioaddr + POINTER);
552         SMC_SELECT_BANK(1);
553         outw((CTL_RELOAD | CTL_EE_SELECT), ioaddr + CONTROL);
554
555         for (loop = wait = 0; loop < 200; loop++) {
556             udelay(10);
557             wait = ((CTL_RELOAD | CTL_STORE) & inw(ioaddr + CONTROL));
558             if (wait == 0) break;
559         }
560         
561         if (wait)
562             return -1;
563         
564         addr = inw(ioaddr + GENERAL);
565         mac[2*i]   = addr & 0xff;
566         mac[2*i+1] = (addr >> 8) & 0xff;
567     }
568     eth_hw_addr_set(dev, mac);
569
570     return 0;
571 }
572
573 /*====================================================================*/
574
575 static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data)
576 {
577         p_dev->resource[0]->end = 16;
578         p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
579         p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
580
581         return pcmcia_request_io(p_dev);
582 }
583
584 static int smc_config(struct pcmcia_device *link)
585 {
586     struct net_device *dev = link->priv;
587     int i;
588
589     link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
590
591     i = pcmcia_loop_config(link, smc_configcheck, NULL);
592     if (!i)
593             dev->base_addr = link->resource[0]->start;
594
595     return i;
596 }
597
598
599 static int smc_setup(struct pcmcia_device *link)
600 {
601     struct net_device *dev = link->priv;
602
603     /* Check for a LAN function extension tuple */
604     if (!pcmcia_get_mac_from_cis(link, dev))
605             return 0;
606
607     /* Try the third string in the Version 1 Version/ID tuple. */
608     if (link->prod_id[2]) {
609             if (cvt_ascii_address(dev, link->prod_id[2]) == 0)
610                     return 0;
611     }
612     return -1;
613 }
614
615 /*====================================================================*/
616
617 static int osi_config(struct pcmcia_device *link)
618 {
619     struct net_device *dev = link->priv;
620     static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
621     int i, j;
622
623     link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ;
624     link->resource[0]->end = 64;
625     link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
626     link->resource[1]->end = 8;
627
628     /* Enable Hard Decode, LAN, Modem */
629     link->io_lines = 16;
630     link->config_index = 0x23;
631
632     for (i = j = 0; j < 4; j++) {
633         link->resource[1]->start = com[j];
634         i = pcmcia_request_io(link);
635         if (i == 0)
636                 break;
637     }
638     if (i != 0) {
639         /* Fallback: turn off hard decode */
640         link->config_index = 0x03;
641         link->resource[1]->end = 0;
642         i = pcmcia_request_io(link);
643     }
644     dev->base_addr = link->resource[0]->start + 0x10;
645     return i;
646 }
647
648 static int osi_load_firmware(struct pcmcia_device *link)
649 {
650         const struct firmware *fw;
651         int i, err;
652
653         err = request_firmware(&fw, FIRMWARE_NAME, &link->dev);
654         if (err) {
655                 pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME);
656                 return err;
657         }
658
659         /* Download the Seven of Diamonds firmware */
660         for (i = 0; i < fw->size; i++) {
661             outb(fw->data[i], link->resource[0]->start + 2);
662             udelay(50);
663         }
664         release_firmware(fw);
665         return err;
666 }
667
668 static int pcmcia_osi_mac(struct pcmcia_device *p_dev,
669                           tuple_t *tuple,
670                           void *priv)
671 {
672         struct net_device *dev = priv;
673
674         if (tuple->TupleDataLen < 8)
675                 return -EINVAL;
676         if (tuple->TupleData[0] != 0x04)
677                 return -EINVAL;
678
679         eth_hw_addr_set(dev, &tuple->TupleData[2]);
680         return 0;
681 };
682
683
684 static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid)
685 {
686     struct net_device *dev = link->priv;
687     int rc;
688
689     /* Read the station address from tuple 0x90, subtuple 0x04 */
690     if (pcmcia_loop_tuple(link, 0x90, pcmcia_osi_mac, dev))
691             return -1;
692
693     if (((manfid == MANFID_OSITECH) &&
694          (cardid == PRODID_OSITECH_SEVEN)) ||
695         ((manfid == MANFID_PSION) &&
696          (cardid == PRODID_PSION_NET100))) {
697         rc = osi_load_firmware(link);
698         if (rc)
699                 return rc;
700     } else if (manfid == MANFID_OSITECH) {
701         /* Make sure both functions are powered up */
702         set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR);
703         /* Now, turn on the interrupt for both card functions */
704         set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR);
705         dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
706               inw(link->resource[0]->start + OSITECH_AUI_PWR),
707               inw(link->resource[0]->start + OSITECH_RESET_ISR));
708     }
709     return 0;
710 }
711
712 static int smc91c92_suspend(struct pcmcia_device *link)
713 {
714         struct net_device *dev = link->priv;
715
716         if (link->open)
717                 netif_device_detach(dev);
718
719         return 0;
720 }
721
722 static int smc91c92_resume(struct pcmcia_device *link)
723 {
724         struct net_device *dev = link->priv;
725         struct smc_private *smc = netdev_priv(dev);
726         int i;
727
728         if ((smc->manfid == MANFID_MEGAHERTZ) &&
729             (smc->cardid == PRODID_MEGAHERTZ_EM3288))
730                 mhz_3288_power(link);
731         if (smc->manfid == MANFID_MOTOROLA)
732                 mot_config(link);
733         if ((smc->manfid == MANFID_OSITECH) &&
734             (smc->cardid != PRODID_OSITECH_SEVEN)) {
735                 /* Power up the card and enable interrupts */
736                 set_bits(0x0300, dev->base_addr-0x10+OSITECH_AUI_PWR);
737                 set_bits(0x0300, dev->base_addr-0x10+OSITECH_RESET_ISR);
738         }
739         if (((smc->manfid == MANFID_OSITECH) &&
740              (smc->cardid == PRODID_OSITECH_SEVEN)) ||
741             ((smc->manfid == MANFID_PSION) &&
742              (smc->cardid == PRODID_PSION_NET100))) {
743                 i = osi_load_firmware(link);
744                 if (i) {
745                         netdev_err(dev, "Failed to load firmware\n");
746                         return i;
747                 }
748         }
749         if (link->open) {
750                 smc_reset(dev);
751                 netif_device_attach(dev);
752         }
753
754         return 0;
755 }
756
757
758 /*======================================================================
759
760     This verifies that the chip is some SMC91cXX variant, and returns
761     the revision code if successful.  Otherwise, it returns -ENODEV.
762
763 ======================================================================*/
764
765 static int check_sig(struct pcmcia_device *link)
766 {
767     struct net_device *dev = link->priv;
768     unsigned int ioaddr = dev->base_addr;
769     int width;
770     u_short s;
771
772     SMC_SELECT_BANK(1);
773     if (inw(ioaddr + BANK_SELECT) >> 8 != 0x33) {
774         /* Try powering up the chip */
775         outw(0, ioaddr + CONTROL);
776         mdelay(55);
777     }
778
779     /* Try setting bus width */
780     width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO);
781     s = inb(ioaddr + CONFIG);
782     if (width)
783         s |= CFG_16BIT;
784     else
785         s &= ~CFG_16BIT;
786     outb(s, ioaddr + CONFIG);
787
788     /* Check Base Address Register to make sure bus width is OK */
789     s = inw(ioaddr + BASE_ADDR);
790     if ((inw(ioaddr + BANK_SELECT) >> 8 == 0x33) &&
791         ((s >> 8) != (s & 0xff))) {
792         SMC_SELECT_BANK(3);
793         s = inw(ioaddr + REVISION);
794         return s & 0xff;
795     }
796
797     if (width) {
798             netdev_info(dev, "using 8-bit IO window\n");
799
800             smc91c92_suspend(link);
801             pcmcia_fixup_iowidth(link);
802             smc91c92_resume(link);
803             return check_sig(link);
804     }
805     return -ENODEV;
806 }
807
808 static int smc91c92_config(struct pcmcia_device *link)
809 {
810     struct net_device *dev = link->priv;
811     struct smc_private *smc = netdev_priv(dev);
812     char *name;
813     int i, rev, j = 0;
814     unsigned int ioaddr;
815     u_long mir;
816
817     dev_dbg(&link->dev, "smc91c92_config\n");
818
819     smc->manfid = link->manf_id;
820     smc->cardid = link->card_id;
821
822     if ((smc->manfid == MANFID_OSITECH) &&
823         (smc->cardid != PRODID_OSITECH_SEVEN)) {
824         i = osi_config(link);
825     } else if ((smc->manfid == MANFID_MOTOROLA) ||
826                ((smc->manfid == MANFID_MEGAHERTZ) &&
827                 ((smc->cardid == PRODID_MEGAHERTZ_VARIOUS) ||
828                  (smc->cardid == PRODID_MEGAHERTZ_EM3288)))) {
829         i = mhz_mfc_config(link);
830     } else {
831         i = smc_config(link);
832     }
833     if (i)
834             goto config_failed;
835
836     i = pcmcia_request_irq(link, smc_interrupt);
837     if (i)
838             goto config_failed;
839     i = pcmcia_enable_device(link);
840     if (i)
841             goto config_failed;
842
843     if (smc->manfid == MANFID_MOTOROLA)
844         mot_config(link);
845
846     dev->irq = link->irq;
847
848     if ((if_port >= 0) && (if_port <= 2))
849         dev->if_port = if_port;
850     else
851         dev_notice(&link->dev, "invalid if_port requested\n");
852
853     switch (smc->manfid) {
854     case MANFID_OSITECH:
855     case MANFID_PSION:
856         i = osi_setup(link, smc->manfid, smc->cardid); break;
857     case MANFID_SMC:
858     case MANFID_NEW_MEDIA:
859         i = smc_setup(link); break;
860     case 0x128: /* For broken Megahertz cards */
861     case MANFID_MEGAHERTZ:
862         i = mhz_setup(link); break;
863     case MANFID_MOTOROLA:
864     default: /* get the hw address from EEPROM */
865         i = mot_setup(link); break;
866     }
867
868     if (i != 0) {
869         dev_notice(&link->dev, "Unable to find hardware address.\n");
870         goto config_failed;
871     }
872
873     smc->duplex = 0;
874     smc->rx_ovrn = 0;
875
876     rev = check_sig(link);
877     name = "???";
878     if (rev > 0)
879         switch (rev >> 4) {
880         case 3: name = "92"; break;
881         case 4: name = ((rev & 15) >= 6) ? "96" : "94"; break;
882         case 5: name = "95"; break;
883         case 7: name = "100"; break;
884         case 8: name = "100-FD"; break;
885         case 9: name = "110"; break;
886         }
887
888     ioaddr = dev->base_addr;
889     if (rev > 0) {
890         u_long mcr;
891         SMC_SELECT_BANK(0);
892         mir = inw(ioaddr + MEMINFO) & 0xff;
893         if (mir == 0xff) mir++;
894         /* Get scale factor for memory size */
895         mcr = ((rev >> 4) > 3) ? inw(ioaddr + MEMCFG) : 0x0200;
896         mir *= 128 * (1<<((mcr >> 9) & 7));
897         SMC_SELECT_BANK(1);
898         smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT;
899         smc->cfg |= CFG_NO_WAIT | CFG_16BIT | CFG_STATIC;
900         if (smc->manfid == MANFID_OSITECH)
901             smc->cfg |= CFG_IRQ_SEL_1 | CFG_IRQ_SEL_0;
902         if ((rev >> 4) >= 7)
903             smc->cfg |= CFG_MII_SELECT;
904     } else
905         mir = 0;
906
907     if (smc->cfg & CFG_MII_SELECT) {
908         SMC_SELECT_BANK(3);
909
910         for (i = 0; i < 32; i++) {
911             j = mdio_read(dev, i, 1);
912             if ((j != 0) && (j != 0xffff)) break;
913         }
914         smc->mii_if.phy_id = (i < 32) ? i : -1;
915
916         SMC_SELECT_BANK(0);
917     }
918
919     SET_NETDEV_DEV(dev, &link->dev);
920
921     if (register_netdev(dev) != 0) {
922         dev_err(&link->dev, "register_netdev() failed\n");
923         goto config_undo;
924     }
925
926     netdev_info(dev, "smc91c%s rev %d: io %#3lx, irq %d, hw_addr %pM\n",
927                 name, (rev & 0x0f), dev->base_addr, dev->irq, dev->dev_addr);
928
929     if (rev > 0) {
930         if (mir & 0x3ff)
931             netdev_info(dev, "  %lu byte", mir);
932         else
933             netdev_info(dev, "  %lu kb", mir>>10);
934         pr_cont(" buffer, %s xcvr\n",
935                 (smc->cfg & CFG_MII_SELECT) ? "MII" : if_names[dev->if_port]);
936     }
937
938     if (smc->cfg & CFG_MII_SELECT) {
939         if (smc->mii_if.phy_id != -1) {
940             netdev_dbg(dev, "  MII transceiver at index %d, status %x\n",
941                        smc->mii_if.phy_id, j);
942         } else {
943             netdev_notice(dev, "  No MII transceivers found!\n");
944         }
945     }
946     return 0;
947
948 config_undo:
949     unregister_netdev(dev);
950 config_failed:
951     smc91c92_release(link);
952     free_netdev(dev);
953     return -ENODEV;
954 } /* smc91c92_config */
955
956 static void smc91c92_release(struct pcmcia_device *link)
957 {
958         dev_dbg(&link->dev, "smc91c92_release\n");
959         if (link->resource[2]->end) {
960                 struct net_device *dev = link->priv;
961                 struct smc_private *smc = netdev_priv(dev);
962                 iounmap(smc->base);
963         }
964         pcmcia_disable_device(link);
965 }
966
967 /*======================================================================
968
969     MII interface support for SMC91cXX based cards
970 ======================================================================*/
971
972 #define MDIO_SHIFT_CLK          0x04
973 #define MDIO_DATA_OUT           0x01
974 #define MDIO_DIR_WRITE          0x08
975 #define MDIO_DATA_WRITE0        (MDIO_DIR_WRITE)
976 #define MDIO_DATA_WRITE1        (MDIO_DIR_WRITE | MDIO_DATA_OUT)
977 #define MDIO_DATA_READ          0x02
978
979 static void mdio_sync(unsigned int addr)
980 {
981     int bits;
982     for (bits = 0; bits < 32; bits++) {
983         outb(MDIO_DATA_WRITE1, addr);
984         outb(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
985     }
986 }
987
988 static int mdio_read(struct net_device *dev, int phy_id, int loc)
989 {
990     unsigned int addr = dev->base_addr + MGMT;
991     u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
992     int i, retval = 0;
993
994     mdio_sync(addr);
995     for (i = 13; i >= 0; i--) {
996         int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
997         outb(dat, addr);
998         outb(dat | MDIO_SHIFT_CLK, addr);
999     }
1000     for (i = 19; i > 0; i--) {
1001         outb(0, addr);
1002         retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
1003         outb(MDIO_SHIFT_CLK, addr);
1004     }
1005     return (retval>>1) & 0xffff;
1006 }
1007
1008 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
1009 {
1010     unsigned int addr = dev->base_addr + MGMT;
1011     u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
1012     int i;
1013
1014     mdio_sync(addr);
1015     for (i = 31; i >= 0; i--) {
1016         int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
1017         outb(dat, addr);
1018         outb(dat | MDIO_SHIFT_CLK, addr);
1019     }
1020     for (i = 1; i >= 0; i--) {
1021         outb(0, addr);
1022         outb(MDIO_SHIFT_CLK, addr);
1023     }
1024 }
1025
1026 /*======================================================================
1027
1028     The driver core code, most of which should be common with a
1029     non-PCMCIA implementation.
1030
1031 ======================================================================*/
1032
1033 #ifdef PCMCIA_DEBUG
1034 static void smc_dump(struct net_device *dev)
1035 {
1036     unsigned int ioaddr = dev->base_addr;
1037     u_short i, w, save;
1038     save = inw(ioaddr + BANK_SELECT);
1039     for (w = 0; w < 4; w++) {
1040         SMC_SELECT_BANK(w);
1041         netdev_dbg(dev, "bank %d: ", w);
1042         for (i = 0; i < 14; i += 2)
1043             pr_cont(" %04x", inw(ioaddr + i));
1044         pr_cont("\n");
1045     }
1046     outw(save, ioaddr + BANK_SELECT);
1047 }
1048 #endif
1049
1050 static int smc_open(struct net_device *dev)
1051 {
1052     struct smc_private *smc = netdev_priv(dev);
1053     struct pcmcia_device *link = smc->p_dev;
1054
1055     dev_dbg(&link->dev, "%s: smc_open(%p), ID/Window %4.4x.\n",
1056           dev->name, dev, inw(dev->base_addr + BANK_SELECT));
1057 #ifdef PCMCIA_DEBUG
1058     smc_dump(dev);
1059 #endif
1060
1061     /* Check that the PCMCIA card is still here. */
1062     if (!pcmcia_dev_present(link))
1063         return -ENODEV;
1064     /* Physical device present signature. */
1065     if (check_sig(link) < 0) {
1066         netdev_info(dev, "Yikes!  Bad chip signature!\n");
1067         return -ENODEV;
1068     }
1069     link->open++;
1070
1071     netif_start_queue(dev);
1072     smc->saved_skb = NULL;
1073     smc->packets_waiting = 0;
1074
1075     smc_reset(dev);
1076     timer_setup(&smc->media, media_check, 0);
1077     mod_timer(&smc->media, jiffies + HZ);
1078
1079     return 0;
1080 } /* smc_open */
1081
1082 /*====================================================================*/
1083
1084 static int smc_close(struct net_device *dev)
1085 {
1086     struct smc_private *smc = netdev_priv(dev);
1087     struct pcmcia_device *link = smc->p_dev;
1088     unsigned int ioaddr = dev->base_addr;
1089
1090     dev_dbg(&link->dev, "%s: smc_close(), status %4.4x.\n",
1091           dev->name, inw(ioaddr + BANK_SELECT));
1092
1093     netif_stop_queue(dev);
1094
1095     /* Shut off all interrupts, and turn off the Tx and Rx sections.
1096        Don't bother to check for chip present. */
1097     SMC_SELECT_BANK(2); /* Nominally paranoia, but do no assume... */
1098     outw(0, ioaddr + INTERRUPT);
1099     SMC_SELECT_BANK(0);
1100     mask_bits(0xff00, ioaddr + RCR);
1101     mask_bits(0xff00, ioaddr + TCR);
1102
1103     /* Put the chip into power-down mode. */
1104     SMC_SELECT_BANK(1);
1105     outw(CTL_POWERDOWN, ioaddr + CONTROL );
1106
1107     link->open--;
1108     del_timer_sync(&smc->media);
1109
1110     return 0;
1111 } /* smc_close */
1112
1113 /*======================================================================
1114
1115    Transfer a packet to the hardware and trigger the packet send.
1116    This may be called at either from either the Tx queue code
1117    or the interrupt handler.
1118
1119 ======================================================================*/
1120
1121 static void smc_hardware_send_packet(struct net_device * dev)
1122 {
1123     struct smc_private *smc = netdev_priv(dev);
1124     struct sk_buff *skb = smc->saved_skb;
1125     unsigned int ioaddr = dev->base_addr;
1126     u_char packet_no;
1127
1128     if (!skb) {
1129         netdev_err(dev, "In XMIT with no packet to send\n");
1130         return;
1131     }
1132
1133     /* There should be a packet slot waiting. */
1134     packet_no = inw(ioaddr + PNR_ARR) >> 8;
1135     if (packet_no & 0x80) {
1136         /* If not, there is a hardware problem!  Likely an ejected card. */
1137         netdev_warn(dev, "hardware Tx buffer allocation failed, status %#2.2x\n",
1138                     packet_no);
1139         dev_kfree_skb_irq(skb);
1140         smc->saved_skb = NULL;
1141         netif_start_queue(dev);
1142         return;
1143     }
1144
1145     dev->stats.tx_bytes += skb->len;
1146     /* The card should use the just-allocated buffer. */
1147     outw(packet_no, ioaddr + PNR_ARR);
1148     /* point to the beginning of the packet */
1149     outw(PTR_AUTOINC , ioaddr + POINTER);
1150
1151     /* Send the packet length (+6 for status, length and ctl byte)
1152        and the status word (set to zeros). */
1153     {
1154         u_char *buf = skb->data;
1155         u_int length = skb->len; /* The chip will pad to ethernet min. */
1156
1157         netdev_dbg(dev, "Trying to xmit packet of length %d\n", length);
1158         
1159         /* send the packet length: +6 for status word, length, and ctl */
1160         outw(0, ioaddr + DATA_1);
1161         outw(length + 6, ioaddr + DATA_1);
1162         outsw(ioaddr + DATA_1, buf, length >> 1);
1163         
1164         /* The odd last byte, if there is one, goes in the control word. */
1165         outw((length & 1) ? 0x2000 | buf[length-1] : 0, ioaddr + DATA_1);
1166     }
1167
1168     /* Enable the Tx interrupts, both Tx (TxErr) and TxEmpty. */
1169     outw(((IM_TX_INT|IM_TX_EMPTY_INT)<<8) |
1170          (inw(ioaddr + INTERRUPT) & 0xff00),
1171          ioaddr + INTERRUPT);
1172
1173     /* The chip does the rest of the work. */
1174     outw(MC_ENQUEUE , ioaddr + MMU_CMD);
1175
1176     smc->saved_skb = NULL;
1177     dev_kfree_skb_irq(skb);
1178     netif_trans_update(dev);
1179     netif_start_queue(dev);
1180 }
1181
1182 /*====================================================================*/
1183
1184 static void smc_tx_timeout(struct net_device *dev, unsigned int txqueue)
1185 {
1186     struct smc_private *smc = netdev_priv(dev);
1187     unsigned int ioaddr = dev->base_addr;
1188
1189     netdev_notice(dev, "transmit timed out, Tx_status %2.2x status %4.4x.\n",
1190                   inw(ioaddr)&0xff, inw(ioaddr + 2));
1191     dev->stats.tx_errors++;
1192     smc_reset(dev);
1193     netif_trans_update(dev); /* prevent tx timeout */
1194     smc->saved_skb = NULL;
1195     netif_wake_queue(dev);
1196 }
1197
1198 static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
1199                                         struct net_device *dev)
1200 {
1201     struct smc_private *smc = netdev_priv(dev);
1202     unsigned int ioaddr = dev->base_addr;
1203     u_short num_pages;
1204     short time_out, ir;
1205     unsigned long flags;
1206
1207     netif_stop_queue(dev);
1208
1209     netdev_dbg(dev, "smc_start_xmit(length = %d) called, status %04x\n",
1210                skb->len, inw(ioaddr + 2));
1211
1212     if (smc->saved_skb) {
1213         /* THIS SHOULD NEVER HAPPEN. */
1214         dev->stats.tx_aborted_errors++;
1215         netdev_dbg(dev, "Internal error -- sent packet while busy\n");
1216         return NETDEV_TX_BUSY;
1217     }
1218     smc->saved_skb = skb;
1219
1220     num_pages = skb->len >> 8;
1221
1222     if (num_pages > 7) {
1223         netdev_err(dev, "Far too big packet error: %d pages\n", num_pages);
1224         dev_kfree_skb (skb);
1225         smc->saved_skb = NULL;
1226         dev->stats.tx_dropped++;
1227         return NETDEV_TX_OK;            /* Do not re-queue this packet. */
1228     }
1229     /* A packet is now waiting. */
1230     smc->packets_waiting++;
1231
1232     spin_lock_irqsave(&smc->lock, flags);
1233     SMC_SELECT_BANK(2); /* Paranoia, we should always be in window 2 */
1234
1235     /* need MC_RESET to keep the memory consistent. errata? */
1236     if (smc->rx_ovrn) {
1237         outw(MC_RESET, ioaddr + MMU_CMD);
1238         smc->rx_ovrn = 0;
1239     }
1240
1241     /* Allocate the memory; send the packet now if we win. */
1242     outw(MC_ALLOC | num_pages, ioaddr + MMU_CMD);
1243     for (time_out = MEMORY_WAIT_TIME; time_out >= 0; time_out--) {
1244         ir = inw(ioaddr+INTERRUPT);
1245         if (ir & IM_ALLOC_INT) {
1246             /* Acknowledge the interrupt, send the packet. */
1247             outw((ir&0xff00) | IM_ALLOC_INT, ioaddr + INTERRUPT);
1248             smc_hardware_send_packet(dev);      /* Send the packet now.. */
1249             spin_unlock_irqrestore(&smc->lock, flags);
1250             return NETDEV_TX_OK;
1251         }
1252     }
1253
1254     /* Otherwise defer until the Tx-space-allocated interrupt. */
1255     netdev_dbg(dev, "memory allocation deferred.\n");
1256     outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT);
1257     spin_unlock_irqrestore(&smc->lock, flags);
1258
1259     return NETDEV_TX_OK;
1260 }
1261
1262 /*======================================================================
1263
1264     Handle a Tx anomalous event.  Entered while in Window 2.
1265
1266 ======================================================================*/
1267
1268 static void smc_tx_err(struct net_device * dev)
1269 {
1270     struct smc_private *smc = netdev_priv(dev);
1271     unsigned int ioaddr = dev->base_addr;
1272     int saved_packet = inw(ioaddr + PNR_ARR) & 0xff;
1273     int packet_no = inw(ioaddr + FIFO_PORTS) & 0x7f;
1274     int tx_status;
1275
1276     /* select this as the packet to read from */
1277     outw(packet_no, ioaddr + PNR_ARR);
1278
1279     /* read the first word from this packet */
1280     outw(PTR_AUTOINC | PTR_READ | 0, ioaddr + POINTER);
1281
1282     tx_status = inw(ioaddr + DATA_1);
1283
1284     dev->stats.tx_errors++;
1285     if (tx_status & TS_LOSTCAR) dev->stats.tx_carrier_errors++;
1286     if (tx_status & TS_LATCOL)  dev->stats.tx_window_errors++;
1287     if (tx_status & TS_16COL) {
1288         dev->stats.tx_aborted_errors++;
1289         smc->tx_err++;
1290     }
1291
1292     if (tx_status & TS_SUCCESS) {
1293         netdev_notice(dev, "Successful packet caused error interrupt?\n");
1294     }
1295     /* re-enable transmit */
1296     SMC_SELECT_BANK(0);
1297     outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
1298     SMC_SELECT_BANK(2);
1299
1300     outw(MC_FREEPKT, ioaddr + MMU_CMD);         /* Free the packet memory. */
1301
1302     /* one less packet waiting for me */
1303     smc->packets_waiting--;
1304
1305     outw(saved_packet, ioaddr + PNR_ARR);
1306 }
1307
1308 /*====================================================================*/
1309
1310 static void smc_eph_irq(struct net_device *dev)
1311 {
1312     struct smc_private *smc = netdev_priv(dev);
1313     unsigned int ioaddr = dev->base_addr;
1314     u_short card_stats, ephs;
1315
1316     SMC_SELECT_BANK(0);
1317     ephs = inw(ioaddr + EPH);
1318     netdev_dbg(dev, "Ethernet protocol handler interrupt, status %4.4x.\n",
1319                ephs);
1320     /* Could be a counter roll-over warning: update stats. */
1321     card_stats = inw(ioaddr + COUNTER);
1322     /* single collisions */
1323     dev->stats.collisions += card_stats & 0xF;
1324     card_stats >>= 4;
1325     /* multiple collisions */
1326     dev->stats.collisions += card_stats & 0xF;
1327 #if 0           /* These are for when linux supports these statistics */
1328     card_stats >>= 4;                   /* deferred */
1329     card_stats >>= 4;                   /* excess deferred */
1330 #endif
1331     /* If we had a transmit error we must re-enable the transmitter. */
1332     outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
1333
1334     /* Clear a link error interrupt. */
1335     SMC_SELECT_BANK(1);
1336     outw(CTL_AUTO_RELEASE | 0x0000, ioaddr + CONTROL);
1337     outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
1338          ioaddr + CONTROL);
1339     SMC_SELECT_BANK(2);
1340 }
1341
1342 /*====================================================================*/
1343
1344 static irqreturn_t smc_interrupt(int irq, void *dev_id)
1345 {
1346     struct net_device *dev = dev_id;
1347     struct smc_private *smc = netdev_priv(dev);
1348     unsigned int ioaddr;
1349     u_short saved_bank, saved_pointer, mask, status;
1350     unsigned int handled = 1;
1351     char bogus_cnt = INTR_WORK;         /* Work we are willing to do. */
1352
1353     if (!netif_device_present(dev))
1354         return IRQ_NONE;
1355
1356     ioaddr = dev->base_addr;
1357
1358     netdev_dbg(dev, "SMC91c92 interrupt %d at %#x.\n",
1359                irq, ioaddr);
1360
1361     spin_lock(&smc->lock);
1362     smc->watchdog = 0;
1363     saved_bank = inw(ioaddr + BANK_SELECT);
1364     if ((saved_bank & 0xff00) != 0x3300) {
1365         /* The device does not exist -- the card could be off-line, or
1366            maybe it has been ejected. */
1367         netdev_dbg(dev, "SMC91c92 interrupt %d for non-existent/ejected device.\n",
1368                    irq);
1369         handled = 0;
1370         goto irq_done;
1371     }
1372
1373     SMC_SELECT_BANK(2);
1374     saved_pointer = inw(ioaddr + POINTER);
1375     mask = inw(ioaddr + INTERRUPT) >> 8;
1376     /* clear all interrupts */
1377     outw(0, ioaddr + INTERRUPT);
1378
1379     do { /* read the status flag, and mask it */
1380         status = inw(ioaddr + INTERRUPT) & 0xff;
1381         netdev_dbg(dev, "Status is %#2.2x (mask %#2.2x).\n",
1382                    status, mask);
1383         if ((status & mask) == 0) {
1384             if (bogus_cnt == INTR_WORK)
1385                 handled = 0;
1386             break;
1387         }
1388         if (status & IM_RCV_INT) {
1389             /* Got a packet(s). */
1390             smc_rx(dev);
1391         }
1392         if (status & IM_TX_INT) {
1393             smc_tx_err(dev);
1394             outw(IM_TX_INT, ioaddr + INTERRUPT);
1395         }
1396         status &= mask;
1397         if (status & IM_TX_EMPTY_INT) {
1398             outw(IM_TX_EMPTY_INT, ioaddr + INTERRUPT);
1399             mask &= ~IM_TX_EMPTY_INT;
1400             dev->stats.tx_packets += smc->packets_waiting;
1401             smc->packets_waiting = 0;
1402         }
1403         if (status & IM_ALLOC_INT) {
1404             /* Clear this interrupt so it doesn't happen again */
1405             mask &= ~IM_ALLOC_INT;
1406         
1407             smc_hardware_send_packet(dev);
1408         
1409             /* enable xmit interrupts based on this */
1410             mask |= (IM_TX_EMPTY_INT | IM_TX_INT);
1411         
1412             /* and let the card send more packets to me */
1413             netif_wake_queue(dev);
1414         }
1415         if (status & IM_RX_OVRN_INT) {
1416             dev->stats.rx_errors++;
1417             dev->stats.rx_fifo_errors++;
1418             if (smc->duplex)
1419                 smc->rx_ovrn = 1; /* need MC_RESET outside smc_interrupt */
1420             outw(IM_RX_OVRN_INT, ioaddr + INTERRUPT);
1421         }
1422         if (status & IM_EPH_INT)
1423             smc_eph_irq(dev);
1424     } while (--bogus_cnt);
1425
1426     netdev_dbg(dev, "  Restoring saved registers mask %2.2x bank %4.4x pointer %4.4x.\n",
1427                mask, saved_bank, saved_pointer);
1428
1429     /* restore state register */
1430     outw((mask<<8), ioaddr + INTERRUPT);
1431     outw(saved_pointer, ioaddr + POINTER);
1432     SMC_SELECT_BANK(saved_bank);
1433
1434     netdev_dbg(dev, "Exiting interrupt IRQ%d.\n", irq);
1435
1436 irq_done:
1437
1438     if ((smc->manfid == MANFID_OSITECH) &&
1439         (smc->cardid != PRODID_OSITECH_SEVEN)) {
1440         /* Retrigger interrupt if needed */
1441         mask_bits(0x00ff, ioaddr-0x10+OSITECH_RESET_ISR);
1442         set_bits(0x0300, ioaddr-0x10+OSITECH_RESET_ISR);
1443     }
1444     if (smc->manfid == MANFID_MOTOROLA) {
1445         u_char cor;
1446         cor = readb(smc->base + MOT_UART + CISREG_COR);
1447         writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_UART + CISREG_COR);
1448         writeb(cor, smc->base + MOT_UART + CISREG_COR);
1449         cor = readb(smc->base + MOT_LAN + CISREG_COR);
1450         writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR);
1451         writeb(cor, smc->base + MOT_LAN + CISREG_COR);
1452     }
1453
1454     if ((smc->base != NULL) &&  /* Megahertz MFC's */
1455         (smc->manfid == MANFID_MEGAHERTZ) &&
1456         (smc->cardid == PRODID_MEGAHERTZ_EM3288)) {
1457
1458         u_char tmp;
1459         tmp = readb(smc->base+MEGAHERTZ_ISR);
1460         tmp = readb(smc->base+MEGAHERTZ_ISR);
1461
1462         /* Retrigger interrupt if needed */
1463         writeb(tmp, smc->base + MEGAHERTZ_ISR);
1464         writeb(tmp, smc->base + MEGAHERTZ_ISR);
1465     }
1466
1467     spin_unlock(&smc->lock);
1468     return IRQ_RETVAL(handled);
1469 }
1470
1471 /*====================================================================*/
1472
1473 static void smc_rx(struct net_device *dev)
1474 {
1475     unsigned int ioaddr = dev->base_addr;
1476     int rx_status;
1477     int packet_length;  /* Caution: not frame length, rather words
1478                            to transfer from the chip. */
1479
1480     /* Assertion: we are in Window 2. */
1481
1482     if (inw(ioaddr + FIFO_PORTS) & FP_RXEMPTY) {
1483         netdev_err(dev, "smc_rx() with nothing on Rx FIFO\n");
1484         return;
1485     }
1486
1487     /*  Reset the read pointer, and read the status and packet length. */
1488     outw(PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER);
1489     rx_status = inw(ioaddr + DATA_1);
1490     packet_length = inw(ioaddr + DATA_1) & 0x07ff;
1491
1492     netdev_dbg(dev, "Receive status %4.4x length %d.\n",
1493                rx_status, packet_length);
1494
1495     if (!(rx_status & RS_ERRORS)) {
1496         /* do stuff to make a new packet */
1497         struct sk_buff *skb;
1498         struct smc_private *smc = netdev_priv(dev);
1499         
1500         /* Note: packet_length adds 5 or 6 extra bytes here! */
1501         skb = netdev_alloc_skb(dev, packet_length+2);
1502         
1503         if (skb == NULL) {
1504             netdev_dbg(dev, "Low memory, packet dropped.\n");
1505             dev->stats.rx_dropped++;
1506             outw(MC_RELEASE, ioaddr + MMU_CMD);
1507             return;
1508         }
1509         
1510         packet_length -= (rx_status & RS_ODDFRAME ? 5 : 6);
1511         skb_reserve(skb, 2);
1512         insw(ioaddr+DATA_1, skb_put(skb, packet_length),
1513              (packet_length+1)>>1);
1514         skb->protocol = eth_type_trans(skb, dev);
1515         
1516         netif_rx(skb);
1517         smc->last_rx = jiffies;
1518         dev->stats.rx_packets++;
1519         dev->stats.rx_bytes += packet_length;
1520         if (rx_status & RS_MULTICAST)
1521             dev->stats.multicast++;
1522     } else {
1523         /* error ... */
1524         dev->stats.rx_errors++;
1525         
1526         if (rx_status & RS_ALGNERR)  dev->stats.rx_frame_errors++;
1527         if (rx_status & (RS_TOOSHORT | RS_TOOLONG))
1528             dev->stats.rx_length_errors++;
1529         if (rx_status & RS_BADCRC)      dev->stats.rx_crc_errors++;
1530     }
1531     /* Let the MMU free the memory of this packet. */
1532     outw(MC_RELEASE, ioaddr + MMU_CMD);
1533 }
1534
1535 /*======================================================================
1536
1537     Set the receive mode.
1538
1539     This routine is used by both the protocol level to notify us of
1540     promiscuous/multicast mode changes, and by the open/reset code to
1541     initialize the Rx registers.  We always set the multicast list and
1542     leave the receiver running.
1543
1544 ======================================================================*/
1545
1546 static void set_rx_mode(struct net_device *dev)
1547 {
1548     unsigned int ioaddr = dev->base_addr;
1549     struct smc_private *smc = netdev_priv(dev);
1550     unsigned char multicast_table[8];
1551     unsigned long flags;
1552     u_short rx_cfg_setting;
1553     int i;
1554
1555     memset(multicast_table, 0, sizeof(multicast_table));
1556
1557     if (dev->flags & IFF_PROMISC) {
1558         rx_cfg_setting = RxStripCRC | RxEnable | RxPromisc | RxAllMulti;
1559     } else if (dev->flags & IFF_ALLMULTI)
1560         rx_cfg_setting = RxStripCRC | RxEnable | RxAllMulti;
1561     else {
1562         if (!netdev_mc_empty(dev)) {
1563             struct netdev_hw_addr *ha;
1564
1565             netdev_for_each_mc_addr(ha, dev) {
1566                 u_int position = ether_crc(6, ha->addr);
1567                 multicast_table[position >> 29] |= 1 << ((position >> 26) & 7);
1568             }
1569         }
1570         rx_cfg_setting = RxStripCRC | RxEnable;
1571     }
1572
1573     /* Load MC table and Rx setting into the chip without interrupts. */
1574     spin_lock_irqsave(&smc->lock, flags);
1575     SMC_SELECT_BANK(3);
1576     for (i = 0; i < 8; i++)
1577         outb(multicast_table[i], ioaddr + MULTICAST0 + i);
1578     SMC_SELECT_BANK(0);
1579     outw(rx_cfg_setting, ioaddr + RCR);
1580     SMC_SELECT_BANK(2);
1581     spin_unlock_irqrestore(&smc->lock, flags);
1582 }
1583
1584 /*======================================================================
1585
1586     Senses when a card's config changes. Here, it's coax or TP.
1587
1588 ======================================================================*/
1589
1590 static int s9k_config(struct net_device *dev, struct ifmap *map)
1591 {
1592     struct smc_private *smc = netdev_priv(dev);
1593     if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
1594         if (smc->cfg & CFG_MII_SELECT)
1595             return -EOPNOTSUPP;
1596         else if (map->port > 2)
1597             return -EINVAL;
1598         dev->if_port = map->port;
1599         netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
1600         smc_reset(dev);
1601     }
1602     return 0;
1603 }
1604
1605 /*======================================================================
1606
1607     Reset the chip, reloading every register that might be corrupted.
1608
1609 ======================================================================*/
1610
1611 /*
1612   Set transceiver type, perhaps to something other than what the user
1613   specified in dev->if_port.
1614 */
1615 static void smc_set_xcvr(struct net_device *dev, int if_port)
1616 {
1617     struct smc_private *smc = netdev_priv(dev);
1618     unsigned int ioaddr = dev->base_addr;
1619     u_short saved_bank;
1620
1621     saved_bank = inw(ioaddr + BANK_SELECT);
1622     SMC_SELECT_BANK(1);
1623     if (if_port == 2) {
1624         outw(smc->cfg | CFG_AUI_SELECT, ioaddr + CONFIG);
1625         if ((smc->manfid == MANFID_OSITECH) &&
1626             (smc->cardid != PRODID_OSITECH_SEVEN))
1627             set_bits(OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
1628         smc->media_status = ((dev->if_port == 0) ? 0x0001 : 0x0002);
1629     } else {
1630         outw(smc->cfg, ioaddr + CONFIG);
1631         if ((smc->manfid == MANFID_OSITECH) &&
1632             (smc->cardid != PRODID_OSITECH_SEVEN))
1633             mask_bits(~OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
1634         smc->media_status = ((dev->if_port == 0) ? 0x0012 : 0x4001);
1635     }
1636     SMC_SELECT_BANK(saved_bank);
1637 }
1638
1639 static void smc_reset(struct net_device *dev)
1640 {
1641     unsigned int ioaddr = dev->base_addr;
1642     struct smc_private *smc = netdev_priv(dev);
1643     int i;
1644
1645     netdev_dbg(dev, "smc91c92 reset called.\n");
1646
1647     /* The first interaction must be a write to bring the chip out
1648        of sleep mode. */
1649     SMC_SELECT_BANK(0);
1650     /* Reset the chip. */
1651     outw(RCR_SOFTRESET, ioaddr + RCR);
1652     udelay(10);
1653
1654     /* Clear the transmit and receive configuration registers. */
1655     outw(RCR_CLEAR, ioaddr + RCR);
1656     outw(TCR_CLEAR, ioaddr + TCR);
1657
1658     /* Set the Window 1 control, configuration and station addr registers.
1659        No point in writing the I/O base register ;-> */
1660     SMC_SELECT_BANK(1);
1661     /* Automatically release successfully transmitted packets,
1662        Accept link errors, counter and Tx error interrupts. */
1663     outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
1664          ioaddr + CONTROL);
1665     smc_set_xcvr(dev, dev->if_port);
1666     if ((smc->manfid == MANFID_OSITECH) &&
1667         (smc->cardid != PRODID_OSITECH_SEVEN))
1668         outw((dev->if_port == 2 ? OSI_AUI_PWR : 0) |
1669              (inw(ioaddr-0x10+OSITECH_AUI_PWR) & 0xff00),
1670              ioaddr - 0x10 + OSITECH_AUI_PWR);
1671
1672     /* Fill in the physical address.  The databook is wrong about the order! */
1673     for (i = 0; i < 6; i += 2)
1674         outw((dev->dev_addr[i+1]<<8)+dev->dev_addr[i],
1675              ioaddr + ADDR0 + i);
1676
1677     /* Reset the MMU */
1678     SMC_SELECT_BANK(2);
1679     outw(MC_RESET, ioaddr + MMU_CMD);
1680     outw(0, ioaddr + INTERRUPT);
1681
1682     /* Re-enable the chip. */
1683     SMC_SELECT_BANK(0);
1684     outw(((smc->cfg & CFG_MII_SELECT) ? 0 : TCR_MONCSN) |
1685          TCR_ENABLE | TCR_PAD_EN | smc->duplex, ioaddr + TCR);
1686     set_rx_mode(dev);
1687
1688     if (smc->cfg & CFG_MII_SELECT) {
1689         SMC_SELECT_BANK(3);
1690
1691         /* Reset MII */
1692         mdio_write(dev, smc->mii_if.phy_id, 0, 0x8000);
1693
1694         /* Advertise 100F, 100H, 10F, 10H */
1695         mdio_write(dev, smc->mii_if.phy_id, 4, 0x01e1);
1696
1697         /* Restart MII autonegotiation */
1698         mdio_write(dev, smc->mii_if.phy_id, 0, 0x0000);
1699         mdio_write(dev, smc->mii_if.phy_id, 0, 0x1200);
1700     }
1701
1702     /* Enable interrupts. */
1703     SMC_SELECT_BANK(2);
1704     outw((IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT) << 8,
1705          ioaddr + INTERRUPT);
1706 }
1707
1708 /*======================================================================
1709
1710     Media selection timer routine
1711
1712 ======================================================================*/
1713
1714 static void media_check(struct timer_list *t)
1715 {
1716     struct smc_private *smc = from_timer(smc, t, media);
1717     struct net_device *dev = smc->mii_if.dev;
1718     unsigned int ioaddr = dev->base_addr;
1719     u_short i, media, saved_bank;
1720     u_short link;
1721     unsigned long flags;
1722
1723     spin_lock_irqsave(&smc->lock, flags);
1724
1725     saved_bank = inw(ioaddr + BANK_SELECT);
1726
1727     if (!netif_device_present(dev))
1728         goto reschedule;
1729
1730     SMC_SELECT_BANK(2);
1731
1732     /* need MC_RESET to keep the memory consistent. errata? */
1733     if (smc->rx_ovrn) {
1734         outw(MC_RESET, ioaddr + MMU_CMD);
1735         smc->rx_ovrn = 0;
1736     }
1737     i = inw(ioaddr + INTERRUPT);
1738     SMC_SELECT_BANK(0);
1739     media = inw(ioaddr + EPH) & EPH_LINK_OK;
1740     SMC_SELECT_BANK(1);
1741     media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1;
1742
1743     SMC_SELECT_BANK(saved_bank);
1744     spin_unlock_irqrestore(&smc->lock, flags);
1745
1746     /* Check for pending interrupt with watchdog flag set: with
1747        this, we can limp along even if the interrupt is blocked */
1748     if (smc->watchdog++ && ((i>>8) & i)) {
1749         if (!smc->fast_poll)
1750             netdev_info(dev, "interrupt(s) dropped!\n");
1751         local_irq_save(flags);
1752         smc_interrupt(dev->irq, dev);
1753         local_irq_restore(flags);
1754         smc->fast_poll = HZ;
1755     }
1756     if (smc->fast_poll) {
1757         smc->fast_poll--;
1758         smc->media.expires = jiffies + HZ/100;
1759         add_timer(&smc->media);
1760         return;
1761     }
1762
1763     spin_lock_irqsave(&smc->lock, flags);
1764
1765     saved_bank = inw(ioaddr + BANK_SELECT);
1766
1767     if (smc->cfg & CFG_MII_SELECT) {
1768         if (smc->mii_if.phy_id < 0)
1769             goto reschedule;
1770
1771         SMC_SELECT_BANK(3);
1772         link = mdio_read(dev, smc->mii_if.phy_id, 1);
1773         if (!link || (link == 0xffff)) {
1774             netdev_info(dev, "MII is missing!\n");
1775             smc->mii_if.phy_id = -1;
1776             goto reschedule;
1777         }
1778
1779         link &= 0x0004;
1780         if (link != smc->link_status) {
1781             u_short p = mdio_read(dev, smc->mii_if.phy_id, 5);
1782             netdev_info(dev, "%s link beat\n", link ? "found" : "lost");
1783             smc->duplex = (((p & 0x0100) || ((p & 0x1c0) == 0x40))
1784                            ? TCR_FDUPLX : 0);
1785             if (link) {
1786                 netdev_info(dev, "autonegotiation complete: "
1787                             "%dbaseT-%cD selected\n",
1788                             (p & 0x0180) ? 100 : 10, smc->duplex ? 'F' : 'H');
1789             }
1790             SMC_SELECT_BANK(0);
1791             outw(inw(ioaddr + TCR) | smc->duplex, ioaddr + TCR);
1792             smc->link_status = link;
1793         }
1794         goto reschedule;
1795     }
1796
1797     /* Ignore collisions unless we've had no rx's recently */
1798     if (time_after(jiffies, smc->last_rx + HZ)) {
1799         if (smc->tx_err || (smc->media_status & EPH_16COL))
1800             media |= EPH_16COL;
1801     }
1802     smc->tx_err = 0;
1803
1804     if (media != smc->media_status) {
1805         if ((media & smc->media_status & 1) &&
1806             ((smc->media_status ^ media) & EPH_LINK_OK))
1807             netdev_info(dev, "%s link beat\n",
1808                         smc->media_status & EPH_LINK_OK ? "lost" : "found");
1809         else if ((media & smc->media_status & 2) &&
1810                  ((smc->media_status ^ media) & EPH_16COL))
1811             netdev_info(dev, "coax cable %s\n",
1812                         media & EPH_16COL ? "problem" : "ok");
1813         if (dev->if_port == 0) {
1814             if (media & 1) {
1815                 if (media & EPH_LINK_OK)
1816                     netdev_info(dev, "flipped to 10baseT\n");
1817                 else
1818                     smc_set_xcvr(dev, 2);
1819             } else {
1820                 if (media & EPH_16COL)
1821                     smc_set_xcvr(dev, 1);
1822                 else
1823                     netdev_info(dev, "flipped to 10base2\n");
1824             }
1825         }
1826         smc->media_status = media;
1827     }
1828
1829 reschedule:
1830     smc->media.expires = jiffies + HZ;
1831     add_timer(&smc->media);
1832     SMC_SELECT_BANK(saved_bank);
1833     spin_unlock_irqrestore(&smc->lock, flags);
1834 }
1835
1836 static int smc_link_ok(struct net_device *dev)
1837 {
1838     unsigned int ioaddr = dev->base_addr;
1839     struct smc_private *smc = netdev_priv(dev);
1840
1841     if (smc->cfg & CFG_MII_SELECT) {
1842         return mii_link_ok(&smc->mii_if);
1843     } else {
1844         SMC_SELECT_BANK(0);
1845         return inw(ioaddr + EPH) & EPH_LINK_OK;
1846     }
1847 }
1848
1849 static void smc_netdev_get_ecmd(struct net_device *dev,
1850                                 struct ethtool_link_ksettings *ecmd)
1851 {
1852         u16 tmp;
1853         unsigned int ioaddr = dev->base_addr;
1854         u32 supported;
1855
1856         supported = (SUPPORTED_TP | SUPPORTED_AUI |
1857                      SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full);
1858
1859         SMC_SELECT_BANK(1);
1860         tmp = inw(ioaddr + CONFIG);
1861         ecmd->base.port = (tmp & CFG_AUI_SELECT) ? PORT_AUI : PORT_TP;
1862         ecmd->base.speed = SPEED_10;
1863         ecmd->base.phy_address = ioaddr + MGMT;
1864
1865         SMC_SELECT_BANK(0);
1866         tmp = inw(ioaddr + TCR);
1867         ecmd->base.duplex = (tmp & TCR_FDUPLX) ? DUPLEX_FULL : DUPLEX_HALF;
1868
1869         ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
1870                                                 supported);
1871 }
1872
1873 static int smc_netdev_set_ecmd(struct net_device *dev,
1874                                const struct ethtool_link_ksettings *ecmd)
1875 {
1876         u16 tmp;
1877         unsigned int ioaddr = dev->base_addr;
1878
1879         if (ecmd->base.speed != SPEED_10)
1880                 return -EINVAL;
1881         if (ecmd->base.duplex != DUPLEX_HALF &&
1882             ecmd->base.duplex != DUPLEX_FULL)
1883                 return -EINVAL;
1884         if (ecmd->base.port != PORT_TP && ecmd->base.port != PORT_AUI)
1885                 return -EINVAL;
1886
1887         if (ecmd->base.port == PORT_AUI)
1888                 smc_set_xcvr(dev, 1);
1889         else
1890                 smc_set_xcvr(dev, 0);
1891
1892         SMC_SELECT_BANK(0);
1893         tmp = inw(ioaddr + TCR);
1894         if (ecmd->base.duplex == DUPLEX_FULL)
1895                 tmp |= TCR_FDUPLX;
1896         else
1897                 tmp &= ~TCR_FDUPLX;
1898         outw(tmp, ioaddr + TCR);
1899
1900         return 0;
1901 }
1902
1903 static int check_if_running(struct net_device *dev)
1904 {
1905         if (!netif_running(dev))
1906                 return -EINVAL;
1907         return 0;
1908 }
1909
1910 static void smc_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1911 {
1912         strscpy(info->driver, DRV_NAME, sizeof(info->driver));
1913         strscpy(info->version, DRV_VERSION, sizeof(info->version));
1914 }
1915
1916 static int smc_get_link_ksettings(struct net_device *dev,
1917                                   struct ethtool_link_ksettings *ecmd)
1918 {
1919         struct smc_private *smc = netdev_priv(dev);
1920         unsigned int ioaddr = dev->base_addr;
1921         u16 saved_bank = inw(ioaddr + BANK_SELECT);
1922         unsigned long flags;
1923
1924         spin_lock_irqsave(&smc->lock, flags);
1925         SMC_SELECT_BANK(3);
1926         if (smc->cfg & CFG_MII_SELECT)
1927                 mii_ethtool_get_link_ksettings(&smc->mii_if, ecmd);
1928         else
1929                 smc_netdev_get_ecmd(dev, ecmd);
1930         SMC_SELECT_BANK(saved_bank);
1931         spin_unlock_irqrestore(&smc->lock, flags);
1932         return 0;
1933 }
1934
1935 static int smc_set_link_ksettings(struct net_device *dev,
1936                                   const struct ethtool_link_ksettings *ecmd)
1937 {
1938         struct smc_private *smc = netdev_priv(dev);
1939         unsigned int ioaddr = dev->base_addr;
1940         u16 saved_bank = inw(ioaddr + BANK_SELECT);
1941         int ret;
1942         unsigned long flags;
1943
1944         spin_lock_irqsave(&smc->lock, flags);
1945         SMC_SELECT_BANK(3);
1946         if (smc->cfg & CFG_MII_SELECT)
1947                 ret = mii_ethtool_set_link_ksettings(&smc->mii_if, ecmd);
1948         else
1949                 ret = smc_netdev_set_ecmd(dev, ecmd);
1950         SMC_SELECT_BANK(saved_bank);
1951         spin_unlock_irqrestore(&smc->lock, flags);
1952         return ret;
1953 }
1954
1955 static u32 smc_get_link(struct net_device *dev)
1956 {
1957         struct smc_private *smc = netdev_priv(dev);
1958         unsigned int ioaddr = dev->base_addr;
1959         u16 saved_bank = inw(ioaddr + BANK_SELECT);
1960         u32 ret;
1961         unsigned long flags;
1962
1963         spin_lock_irqsave(&smc->lock, flags);
1964         SMC_SELECT_BANK(3);
1965         ret = smc_link_ok(dev);
1966         SMC_SELECT_BANK(saved_bank);
1967         spin_unlock_irqrestore(&smc->lock, flags);
1968         return ret;
1969 }
1970
1971 static int smc_nway_reset(struct net_device *dev)
1972 {
1973         struct smc_private *smc = netdev_priv(dev);
1974         if (smc->cfg & CFG_MII_SELECT) {
1975                 unsigned int ioaddr = dev->base_addr;
1976                 u16 saved_bank = inw(ioaddr + BANK_SELECT);
1977                 int res;
1978
1979                 SMC_SELECT_BANK(3);
1980                 res = mii_nway_restart(&smc->mii_if);
1981                 SMC_SELECT_BANK(saved_bank);
1982
1983                 return res;
1984         } else
1985                 return -EOPNOTSUPP;
1986 }
1987
1988 static const struct ethtool_ops ethtool_ops = {
1989         .begin = check_if_running,
1990         .get_drvinfo = smc_get_drvinfo,
1991         .get_link = smc_get_link,
1992         .nway_reset = smc_nway_reset,
1993         .get_link_ksettings = smc_get_link_ksettings,
1994         .set_link_ksettings = smc_set_link_ksettings,
1995 };
1996
1997 static int smc_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
1998 {
1999         struct smc_private *smc = netdev_priv(dev);
2000         struct mii_ioctl_data *mii = if_mii(rq);
2001         int rc = 0;
2002         u16 saved_bank;
2003         unsigned int ioaddr = dev->base_addr;
2004         unsigned long flags;
2005
2006         if (!netif_running(dev))
2007                 return -EINVAL;
2008
2009         spin_lock_irqsave(&smc->lock, flags);
2010         saved_bank = inw(ioaddr + BANK_SELECT);
2011         SMC_SELECT_BANK(3);
2012         rc = generic_mii_ioctl(&smc->mii_if, mii, cmd, NULL);
2013         SMC_SELECT_BANK(saved_bank);
2014         spin_unlock_irqrestore(&smc->lock, flags);
2015         return rc;
2016 }
2017
2018 static const struct pcmcia_device_id smc91c92_ids[] = {
2019         PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0109, 0x0501),
2020         PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0140, 0x000a),
2021         PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
2022         PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
2023         PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
2024         PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
2025         PCMCIA_PFC_DEVICE_PROD_ID12(0, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
2026         PCMCIA_PFC_DEVICE_PROD_ID12(0, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
2027         PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
2028         PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
2029         PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x016c, 0x0020),
2030         PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0023),
2031         PCMCIA_DEVICE_PROD_ID123("BASICS by New Media Corporation", "Ethernet", "SMC91C94", 0x23c78a9d, 0x00b2e941, 0xcef397fb),
2032         PCMCIA_DEVICE_PROD_ID12("ARGOSY", "Fast Ethernet PCCard", 0x78f308dc, 0xdcea68bc),
2033         PCMCIA_DEVICE_PROD_ID12("dit Co., Ltd.", "PC Card-10/100BTX", 0xe59365c8, 0x6a2161d1),
2034         PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L100C", 0x6a26d1cf, 0xc16ce9c5),
2035         PCMCIA_DEVICE_PROD_ID12("Farallon", "Farallon Enet", 0x58d93fc4, 0x244734e9),
2036         PCMCIA_DEVICE_PROD_ID12("Megahertz", "CC10BT/2", 0x33234748, 0x3c95b953),
2037         PCMCIA_DEVICE_PROD_ID12("MELCO/SMC", "LPC-TX", 0xa2cd8e6d, 0x42da662a),
2038         PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Four of Diamonds Ethernet", 0xc2f80cd, 0xb3466314),
2039         PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Seven of Diamonds Ethernet", 0xc2f80cd, 0x194b650a),
2040         PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast Ethernet PCCard", 0x281f1c5d, 0xdcea68bc),
2041         PCMCIA_DEVICE_PROD_ID12("Psion", "10Mb Ethernet", 0x4ef00b21, 0x844be9e9),
2042         PCMCIA_DEVICE_PROD_ID12("SMC", "EtherEZ Ethernet 8020", 0xc4f8b18b, 0x4a0eeb2d),
2043         /* These conflict with other cards! */
2044         /* PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0100), */
2045         /* PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab), */
2046         PCMCIA_DEVICE_NULL,
2047 };
2048 MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids);
2049
2050 static struct pcmcia_driver smc91c92_cs_driver = {
2051         .owner          = THIS_MODULE,
2052         .name           = "smc91c92_cs",
2053         .probe          = smc91c92_probe,
2054         .remove         = smc91c92_detach,
2055         .id_table       = smc91c92_ids,
2056         .suspend        = smc91c92_suspend,
2057         .resume         = smc91c92_resume,
2058 };
2059 module_pcmcia_driver(smc91c92_cs_driver);