2 * drivers/net/ethernet/mellanox/mlxsw/reg.h
3 * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
4 * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
5 * Copyright (c) 2015 Elad Raz <eladr@mellanox.com>
6 * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
40 #include <linux/string.h>
41 #include <linux/bitops.h>
42 #include <linux/if_vlan.h>
47 struct mlxsw_reg_info {
52 #define MLXSW_REG(type) (&mlxsw_reg_##type)
53 #define MLXSW_REG_LEN(type) MLXSW_REG(type)->len
54 #define MLXSW_REG_ZERO(type, payload) memset(payload, 0, MLXSW_REG(type)->len)
56 /* SGCR - Switch General Configuration Register
57 * --------------------------------------------
58 * This register is used for configuration of the switch capabilities.
60 #define MLXSW_REG_SGCR_ID 0x2000
61 #define MLXSW_REG_SGCR_LEN 0x10
63 static const struct mlxsw_reg_info mlxsw_reg_sgcr = {
64 .id = MLXSW_REG_SGCR_ID,
65 .len = MLXSW_REG_SGCR_LEN,
69 * Link Local Broadcast (Default=0)
70 * When set, all Link Local packets (224.0.0.X) will be treated as broadcast
71 * packets and ignore the IGMP snooping entries.
74 MLXSW_ITEM32(reg, sgcr, llb, 0x04, 0, 1);
76 static inline void mlxsw_reg_sgcr_pack(char *payload, bool llb)
78 MLXSW_REG_ZERO(sgcr, payload);
79 mlxsw_reg_sgcr_llb_set(payload, !!llb);
82 /* SPAD - Switch Physical Address Register
83 * ---------------------------------------
84 * The SPAD register configures the switch physical MAC address.
86 #define MLXSW_REG_SPAD_ID 0x2002
87 #define MLXSW_REG_SPAD_LEN 0x10
89 static const struct mlxsw_reg_info mlxsw_reg_spad = {
90 .id = MLXSW_REG_SPAD_ID,
91 .len = MLXSW_REG_SPAD_LEN,
95 * Base MAC address for the switch partitions.
96 * Per switch partition MAC address is equal to:
100 MLXSW_ITEM_BUF(reg, spad, base_mac, 0x02, 6);
102 /* SMID - Switch Multicast ID
103 * --------------------------
104 * The MID record maps from a MID (Multicast ID), which is a unique identifier
105 * of the multicast group within the stacking domain, into a list of local
106 * ports into which the packet is replicated.
108 #define MLXSW_REG_SMID_ID 0x2007
109 #define MLXSW_REG_SMID_LEN 0x240
111 static const struct mlxsw_reg_info mlxsw_reg_smid = {
112 .id = MLXSW_REG_SMID_ID,
113 .len = MLXSW_REG_SMID_LEN,
117 * Switch partition ID.
120 MLXSW_ITEM32(reg, smid, swid, 0x00, 24, 8);
123 * Multicast identifier - global identifier that represents the multicast group
124 * across all devices.
127 MLXSW_ITEM32(reg, smid, mid, 0x00, 0, 16);
130 * Local port memebership (1 bit per port).
133 MLXSW_ITEM_BIT_ARRAY(reg, smid, port, 0x20, 0x20, 1);
135 /* reg_smid_port_mask
136 * Local port mask (1 bit per port).
139 MLXSW_ITEM_BIT_ARRAY(reg, smid, port_mask, 0x220, 0x20, 1);
141 static inline void mlxsw_reg_smid_pack(char *payload, u16 mid,
144 MLXSW_REG_ZERO(smid, payload);
145 mlxsw_reg_smid_swid_set(payload, 0);
146 mlxsw_reg_smid_mid_set(payload, mid);
147 mlxsw_reg_smid_port_set(payload, port, set);
148 mlxsw_reg_smid_port_mask_set(payload, port, 1);
151 /* SSPR - Switch System Port Record Register
152 * -----------------------------------------
153 * Configures the system port to local port mapping.
155 #define MLXSW_REG_SSPR_ID 0x2008
156 #define MLXSW_REG_SSPR_LEN 0x8
158 static const struct mlxsw_reg_info mlxsw_reg_sspr = {
159 .id = MLXSW_REG_SSPR_ID,
160 .len = MLXSW_REG_SSPR_LEN,
164 * Master - if set, then the record describes the master system port.
165 * This is needed in case a local port is mapped into several system ports
166 * (for multipathing). That number will be reported as the source system
167 * port when packets are forwarded to the CPU. Only one master port is allowed
170 * Note: Must be set for Spectrum.
173 MLXSW_ITEM32(reg, sspr, m, 0x00, 31, 1);
175 /* reg_sspr_local_port
180 MLXSW_ITEM32(reg, sspr, local_port, 0x00, 16, 8);
183 * Virtual port within the physical port.
184 * Should be set to 0 when virtual ports are not enabled on the port.
188 MLXSW_ITEM32(reg, sspr, sub_port, 0x00, 8, 8);
190 /* reg_sspr_system_port
191 * Unique identifier within the stacking domain that represents all the ports
192 * that are available in the system (external ports).
194 * Currently, only single-ASIC configurations are supported, so we default to
195 * 1:1 mapping between system ports and local ports.
198 MLXSW_ITEM32(reg, sspr, system_port, 0x04, 0, 16);
200 static inline void mlxsw_reg_sspr_pack(char *payload, u8 local_port)
202 MLXSW_REG_ZERO(sspr, payload);
203 mlxsw_reg_sspr_m_set(payload, 1);
204 mlxsw_reg_sspr_local_port_set(payload, local_port);
205 mlxsw_reg_sspr_sub_port_set(payload, 0);
206 mlxsw_reg_sspr_system_port_set(payload, local_port);
209 /* SFDAT - Switch Filtering Database Aging Time
210 * --------------------------------------------
211 * Controls the Switch aging time. Aging time is able to be set per Switch
214 #define MLXSW_REG_SFDAT_ID 0x2009
215 #define MLXSW_REG_SFDAT_LEN 0x8
217 static const struct mlxsw_reg_info mlxsw_reg_sfdat = {
218 .id = MLXSW_REG_SFDAT_ID,
219 .len = MLXSW_REG_SFDAT_LEN,
223 * Switch partition ID.
226 MLXSW_ITEM32(reg, sfdat, swid, 0x00, 24, 8);
228 /* reg_sfdat_age_time
229 * Aging time in seconds
231 * Max - 1,000,000 seconds
232 * Default is 300 seconds.
235 MLXSW_ITEM32(reg, sfdat, age_time, 0x04, 0, 20);
237 static inline void mlxsw_reg_sfdat_pack(char *payload, u32 age_time)
239 MLXSW_REG_ZERO(sfdat, payload);
240 mlxsw_reg_sfdat_swid_set(payload, 0);
241 mlxsw_reg_sfdat_age_time_set(payload, age_time);
244 /* SFD - Switch Filtering Database
245 * -------------------------------
246 * The following register defines the access to the filtering database.
247 * The register supports querying, adding, removing and modifying the database.
248 * The access is optimized for bulk updates in which case more than one
249 * FDB record is present in the same command.
251 #define MLXSW_REG_SFD_ID 0x200A
252 #define MLXSW_REG_SFD_BASE_LEN 0x10 /* base length, without records */
253 #define MLXSW_REG_SFD_REC_LEN 0x10 /* record length */
254 #define MLXSW_REG_SFD_REC_MAX_COUNT 64
255 #define MLXSW_REG_SFD_LEN (MLXSW_REG_SFD_BASE_LEN + \
256 MLXSW_REG_SFD_REC_LEN * MLXSW_REG_SFD_REC_MAX_COUNT)
258 static const struct mlxsw_reg_info mlxsw_reg_sfd = {
259 .id = MLXSW_REG_SFD_ID,
260 .len = MLXSW_REG_SFD_LEN,
264 * Switch partition ID for queries. Reserved on Write.
267 MLXSW_ITEM32(reg, sfd, swid, 0x00, 24, 8);
269 enum mlxsw_reg_sfd_op {
270 /* Dump entire FDB a (process according to record_locator) */
271 MLXSW_REG_SFD_OP_QUERY_DUMP = 0,
272 /* Query records by {MAC, VID/FID} value */
273 MLXSW_REG_SFD_OP_QUERY_QUERY = 1,
274 /* Query and clear activity. Query records by {MAC, VID/FID} value */
275 MLXSW_REG_SFD_OP_QUERY_QUERY_AND_CLEAR_ACTIVITY = 2,
276 /* Test. Response indicates if each of the records could be
279 MLXSW_REG_SFD_OP_WRITE_TEST = 0,
280 /* Add/modify. Aged-out records cannot be added. This command removes
281 * the learning notification of the {MAC, VID/FID}. Response includes
282 * the entries that were added to the FDB.
284 MLXSW_REG_SFD_OP_WRITE_EDIT = 1,
285 /* Remove record by {MAC, VID/FID}. This command also removes
286 * the learning notification and aged-out notifications
287 * of the {MAC, VID/FID}. The response provides current (pre-removal)
288 * entries as non-aged-out.
290 MLXSW_REG_SFD_OP_WRITE_REMOVE = 2,
291 /* Remove learned notification by {MAC, VID/FID}. The response provides
292 * the removed learning notification.
294 MLXSW_REG_SFD_OP_WRITE_REMOVE_NOTIFICATION = 2,
301 MLXSW_ITEM32(reg, sfd, op, 0x04, 30, 2);
303 /* reg_sfd_record_locator
304 * Used for querying the FDB. Use record_locator=0 to initiate the
305 * query. When a record is returned, a new record_locator is
306 * returned to be used in the subsequent query.
307 * Reserved for database update.
310 MLXSW_ITEM32(reg, sfd, record_locator, 0x04, 0, 30);
313 * Request: Number of records to read/add/modify/remove
314 * Response: Number of records read/added/replaced/removed
315 * See above description for more details.
319 MLXSW_ITEM32(reg, sfd, num_rec, 0x08, 0, 8);
321 static inline void mlxsw_reg_sfd_pack(char *payload, enum mlxsw_reg_sfd_op op,
324 MLXSW_REG_ZERO(sfd, payload);
325 mlxsw_reg_sfd_op_set(payload, op);
326 mlxsw_reg_sfd_record_locator_set(payload, record_locator);
330 * Switch partition ID.
333 MLXSW_ITEM32_INDEXED(reg, sfd, rec_swid, MLXSW_REG_SFD_BASE_LEN, 24, 8,
334 MLXSW_REG_SFD_REC_LEN, 0x00, false);
336 enum mlxsw_reg_sfd_rec_type {
337 MLXSW_REG_SFD_REC_TYPE_UNICAST = 0x0,
338 MLXSW_REG_SFD_REC_TYPE_UNICAST_LAG = 0x1,
339 MLXSW_REG_SFD_REC_TYPE_MULTICAST = 0x2,
346 MLXSW_ITEM32_INDEXED(reg, sfd, rec_type, MLXSW_REG_SFD_BASE_LEN, 20, 4,
347 MLXSW_REG_SFD_REC_LEN, 0x00, false);
349 enum mlxsw_reg_sfd_rec_policy {
350 /* Replacement disabled, aging disabled. */
351 MLXSW_REG_SFD_REC_POLICY_STATIC_ENTRY = 0,
352 /* (mlag remote): Replacement enabled, aging disabled,
353 * learning notification enabled on this port.
355 MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_MLAG = 1,
356 /* (ingress device): Replacement enabled, aging enabled. */
357 MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_INGRESS = 3,
360 /* reg_sfd_rec_policy
364 MLXSW_ITEM32_INDEXED(reg, sfd, rec_policy, MLXSW_REG_SFD_BASE_LEN, 18, 2,
365 MLXSW_REG_SFD_REC_LEN, 0x00, false);
368 * Activity. Set for new static entries. Set for static entries if a frame SMAC
369 * lookup hits on the entry.
370 * To clear the a bit, use "query and clear activity" op.
373 MLXSW_ITEM32_INDEXED(reg, sfd, rec_a, MLXSW_REG_SFD_BASE_LEN, 16, 1,
374 MLXSW_REG_SFD_REC_LEN, 0x00, false);
380 MLXSW_ITEM_BUF_INDEXED(reg, sfd, rec_mac, MLXSW_REG_SFD_BASE_LEN, 6,
381 MLXSW_REG_SFD_REC_LEN, 0x02);
383 enum mlxsw_reg_sfd_rec_action {
385 MLXSW_REG_SFD_REC_ACTION_NOP = 0,
386 /* forward and trap, trap_id is FDB_TRAP */
387 MLXSW_REG_SFD_REC_ACTION_MIRROR_TO_CPU = 1,
388 /* trap and do not forward, trap_id is FDB_TRAP */
389 MLXSW_REG_SFD_REC_ACTION_TRAP = 3,
390 MLXSW_REG_SFD_REC_ACTION_DISCARD_ERROR = 15,
393 /* reg_sfd_rec_action
394 * Action to apply on the packet.
395 * Note: Dynamic entries can only be configured with NOP action.
398 MLXSW_ITEM32_INDEXED(reg, sfd, rec_action, MLXSW_REG_SFD_BASE_LEN, 28, 4,
399 MLXSW_REG_SFD_REC_LEN, 0x0C, false);
401 /* reg_sfd_uc_sub_port
402 * VEPA channel on local port.
403 * Valid only if local port is a non-stacking port. Must be 0 if multichannel
404 * VEPA is not enabled.
407 MLXSW_ITEM32_INDEXED(reg, sfd, uc_sub_port, MLXSW_REG_SFD_BASE_LEN, 16, 8,
408 MLXSW_REG_SFD_REC_LEN, 0x08, false);
410 /* reg_sfd_uc_fid_vid
411 * Filtering ID or VLAN ID
412 * For SwitchX and SwitchX-2:
413 * - Dynamic entries (policy 2,3) use FID
414 * - Static entries (policy 0) use VID
415 * - When independent learning is configured, VID=FID
416 * For Spectrum: use FID for both Dynamic and Static entries.
417 * VID should not be used.
420 MLXSW_ITEM32_INDEXED(reg, sfd, uc_fid_vid, MLXSW_REG_SFD_BASE_LEN, 0, 16,
421 MLXSW_REG_SFD_REC_LEN, 0x08, false);
423 /* reg_sfd_uc_system_port
424 * Unique port identifier for the final destination of the packet.
427 MLXSW_ITEM32_INDEXED(reg, sfd, uc_system_port, MLXSW_REG_SFD_BASE_LEN, 0, 16,
428 MLXSW_REG_SFD_REC_LEN, 0x0C, false);
430 static inline void mlxsw_reg_sfd_rec_pack(char *payload, int rec_index,
431 enum mlxsw_reg_sfd_rec_type rec_type,
433 enum mlxsw_reg_sfd_rec_action action)
435 u8 num_rec = mlxsw_reg_sfd_num_rec_get(payload);
437 if (rec_index >= num_rec)
438 mlxsw_reg_sfd_num_rec_set(payload, rec_index + 1);
439 mlxsw_reg_sfd_rec_swid_set(payload, rec_index, 0);
440 mlxsw_reg_sfd_rec_type_set(payload, rec_index, rec_type);
441 mlxsw_reg_sfd_rec_mac_memcpy_to(payload, rec_index, mac);
442 mlxsw_reg_sfd_rec_action_set(payload, rec_index, action);
445 static inline void mlxsw_reg_sfd_uc_pack(char *payload, int rec_index,
446 enum mlxsw_reg_sfd_rec_policy policy,
447 const char *mac, u16 fid_vid,
448 enum mlxsw_reg_sfd_rec_action action,
451 mlxsw_reg_sfd_rec_pack(payload, rec_index,
452 MLXSW_REG_SFD_REC_TYPE_UNICAST, mac, action);
453 mlxsw_reg_sfd_rec_policy_set(payload, rec_index, policy);
454 mlxsw_reg_sfd_uc_sub_port_set(payload, rec_index, 0);
455 mlxsw_reg_sfd_uc_fid_vid_set(payload, rec_index, fid_vid);
456 mlxsw_reg_sfd_uc_system_port_set(payload, rec_index, local_port);
459 static inline void mlxsw_reg_sfd_uc_unpack(char *payload, int rec_index,
460 char *mac, u16 *p_fid_vid,
463 mlxsw_reg_sfd_rec_mac_memcpy_from(payload, rec_index, mac);
464 *p_fid_vid = mlxsw_reg_sfd_uc_fid_vid_get(payload, rec_index);
465 *p_local_port = mlxsw_reg_sfd_uc_system_port_get(payload, rec_index);
468 /* reg_sfd_uc_lag_sub_port
470 * Must be 0 if multichannel VEPA is not enabled.
473 MLXSW_ITEM32_INDEXED(reg, sfd, uc_lag_sub_port, MLXSW_REG_SFD_BASE_LEN, 16, 8,
474 MLXSW_REG_SFD_REC_LEN, 0x08, false);
476 /* reg_sfd_uc_lag_fid_vid
477 * Filtering ID or VLAN ID
478 * For SwitchX and SwitchX-2:
479 * - Dynamic entries (policy 2,3) use FID
480 * - Static entries (policy 0) use VID
481 * - When independent learning is configured, VID=FID
482 * For Spectrum: use FID for both Dynamic and Static entries.
483 * VID should not be used.
486 MLXSW_ITEM32_INDEXED(reg, sfd, uc_lag_fid_vid, MLXSW_REG_SFD_BASE_LEN, 0, 16,
487 MLXSW_REG_SFD_REC_LEN, 0x08, false);
489 /* reg_sfd_uc_lag_lag_vid
490 * Indicates VID in case of vFIDs. Reserved for FIDs.
493 MLXSW_ITEM32_INDEXED(reg, sfd, uc_lag_lag_vid, MLXSW_REG_SFD_BASE_LEN, 16, 12,
494 MLXSW_REG_SFD_REC_LEN, 0x0C, false);
496 /* reg_sfd_uc_lag_lag_id
497 * LAG Identifier - pointer into the LAG descriptor table.
500 MLXSW_ITEM32_INDEXED(reg, sfd, uc_lag_lag_id, MLXSW_REG_SFD_BASE_LEN, 0, 10,
501 MLXSW_REG_SFD_REC_LEN, 0x0C, false);
504 mlxsw_reg_sfd_uc_lag_pack(char *payload, int rec_index,
505 enum mlxsw_reg_sfd_rec_policy policy,
506 const char *mac, u16 fid_vid,
507 enum mlxsw_reg_sfd_rec_action action, u16 lag_vid,
510 mlxsw_reg_sfd_rec_pack(payload, rec_index,
511 MLXSW_REG_SFD_REC_TYPE_UNICAST_LAG,
513 mlxsw_reg_sfd_rec_policy_set(payload, rec_index, policy);
514 mlxsw_reg_sfd_uc_lag_sub_port_set(payload, rec_index, 0);
515 mlxsw_reg_sfd_uc_lag_fid_vid_set(payload, rec_index, fid_vid);
516 mlxsw_reg_sfd_uc_lag_lag_vid_set(payload, rec_index, lag_vid);
517 mlxsw_reg_sfd_uc_lag_lag_id_set(payload, rec_index, lag_id);
520 static inline void mlxsw_reg_sfd_uc_lag_unpack(char *payload, int rec_index,
521 char *mac, u16 *p_vid,
524 mlxsw_reg_sfd_rec_mac_memcpy_from(payload, rec_index, mac);
525 *p_vid = mlxsw_reg_sfd_uc_lag_fid_vid_get(payload, rec_index);
526 *p_lag_id = mlxsw_reg_sfd_uc_lag_lag_id_get(payload, rec_index);
531 * Multicast port group index - index into the port group table.
532 * Value 0x1FFF indicates the pgi should point to the MID entry.
533 * For Spectrum this value must be set to 0x1FFF
536 MLXSW_ITEM32_INDEXED(reg, sfd, mc_pgi, MLXSW_REG_SFD_BASE_LEN, 16, 13,
537 MLXSW_REG_SFD_REC_LEN, 0x08, false);
539 /* reg_sfd_mc_fid_vid
541 * Filtering ID or VLAN ID
544 MLXSW_ITEM32_INDEXED(reg, sfd, mc_fid_vid, MLXSW_REG_SFD_BASE_LEN, 0, 16,
545 MLXSW_REG_SFD_REC_LEN, 0x08, false);
549 * Multicast identifier - global identifier that represents the multicast
550 * group across all devices.
553 MLXSW_ITEM32_INDEXED(reg, sfd, mc_mid, MLXSW_REG_SFD_BASE_LEN, 0, 16,
554 MLXSW_REG_SFD_REC_LEN, 0x0C, false);
557 mlxsw_reg_sfd_mc_pack(char *payload, int rec_index,
558 const char *mac, u16 fid_vid,
559 enum mlxsw_reg_sfd_rec_action action, u16 mid)
561 mlxsw_reg_sfd_rec_pack(payload, rec_index,
562 MLXSW_REG_SFD_REC_TYPE_MULTICAST, mac, action);
563 mlxsw_reg_sfd_mc_pgi_set(payload, rec_index, 0x1FFF);
564 mlxsw_reg_sfd_mc_fid_vid_set(payload, rec_index, fid_vid);
565 mlxsw_reg_sfd_mc_mid_set(payload, rec_index, mid);
568 /* SFN - Switch FDB Notification Register
569 * -------------------------------------------
570 * The switch provides notifications on newly learned FDB entries and
571 * aged out entries. The notifications can be polled by software.
573 #define MLXSW_REG_SFN_ID 0x200B
574 #define MLXSW_REG_SFN_BASE_LEN 0x10 /* base length, without records */
575 #define MLXSW_REG_SFN_REC_LEN 0x10 /* record length */
576 #define MLXSW_REG_SFN_REC_MAX_COUNT 64
577 #define MLXSW_REG_SFN_LEN (MLXSW_REG_SFN_BASE_LEN + \
578 MLXSW_REG_SFN_REC_LEN * MLXSW_REG_SFN_REC_MAX_COUNT)
580 static const struct mlxsw_reg_info mlxsw_reg_sfn = {
581 .id = MLXSW_REG_SFN_ID,
582 .len = MLXSW_REG_SFN_LEN,
586 * Switch partition ID.
589 MLXSW_ITEM32(reg, sfn, swid, 0x00, 24, 8);
592 * Request: Number of learned notifications and aged-out notification
594 * Response: Number of notification records returned (must be smaller
595 * than or equal to the value requested)
599 MLXSW_ITEM32(reg, sfn, num_rec, 0x04, 0, 8);
601 static inline void mlxsw_reg_sfn_pack(char *payload)
603 MLXSW_REG_ZERO(sfn, payload);
604 mlxsw_reg_sfn_swid_set(payload, 0);
605 mlxsw_reg_sfn_num_rec_set(payload, MLXSW_REG_SFN_REC_MAX_COUNT);
609 * Switch partition ID.
612 MLXSW_ITEM32_INDEXED(reg, sfn, rec_swid, MLXSW_REG_SFN_BASE_LEN, 24, 8,
613 MLXSW_REG_SFN_REC_LEN, 0x00, false);
615 enum mlxsw_reg_sfn_rec_type {
616 /* MAC addresses learned on a regular port. */
617 MLXSW_REG_SFN_REC_TYPE_LEARNED_MAC = 0x5,
618 /* MAC addresses learned on a LAG port. */
619 MLXSW_REG_SFN_REC_TYPE_LEARNED_MAC_LAG = 0x6,
620 /* Aged-out MAC address on a regular port. */
621 MLXSW_REG_SFN_REC_TYPE_AGED_OUT_MAC = 0x7,
622 /* Aged-out MAC address on a LAG port. */
623 MLXSW_REG_SFN_REC_TYPE_AGED_OUT_MAC_LAG = 0x8,
627 * Notification record type.
630 MLXSW_ITEM32_INDEXED(reg, sfn, rec_type, MLXSW_REG_SFN_BASE_LEN, 20, 4,
631 MLXSW_REG_SFN_REC_LEN, 0x00, false);
637 MLXSW_ITEM_BUF_INDEXED(reg, sfn, rec_mac, MLXSW_REG_SFN_BASE_LEN, 6,
638 MLXSW_REG_SFN_REC_LEN, 0x02);
640 /* reg_sfn_mac_sub_port
641 * VEPA channel on the local port.
642 * 0 if multichannel VEPA is not enabled.
645 MLXSW_ITEM32_INDEXED(reg, sfn, mac_sub_port, MLXSW_REG_SFN_BASE_LEN, 16, 8,
646 MLXSW_REG_SFN_REC_LEN, 0x08, false);
649 * Filtering identifier.
652 MLXSW_ITEM32_INDEXED(reg, sfn, mac_fid, MLXSW_REG_SFN_BASE_LEN, 0, 16,
653 MLXSW_REG_SFN_REC_LEN, 0x08, false);
655 /* reg_sfn_mac_system_port
656 * Unique port identifier for the final destination of the packet.
659 MLXSW_ITEM32_INDEXED(reg, sfn, mac_system_port, MLXSW_REG_SFN_BASE_LEN, 0, 16,
660 MLXSW_REG_SFN_REC_LEN, 0x0C, false);
662 static inline void mlxsw_reg_sfn_mac_unpack(char *payload, int rec_index,
663 char *mac, u16 *p_vid,
666 mlxsw_reg_sfn_rec_mac_memcpy_from(payload, rec_index, mac);
667 *p_vid = mlxsw_reg_sfn_mac_fid_get(payload, rec_index);
668 *p_local_port = mlxsw_reg_sfn_mac_system_port_get(payload, rec_index);
671 /* reg_sfn_mac_lag_lag_id
672 * LAG ID (pointer into the LAG descriptor table).
675 MLXSW_ITEM32_INDEXED(reg, sfn, mac_lag_lag_id, MLXSW_REG_SFN_BASE_LEN, 0, 10,
676 MLXSW_REG_SFN_REC_LEN, 0x0C, false);
678 static inline void mlxsw_reg_sfn_mac_lag_unpack(char *payload, int rec_index,
679 char *mac, u16 *p_vid,
682 mlxsw_reg_sfn_rec_mac_memcpy_from(payload, rec_index, mac);
683 *p_vid = mlxsw_reg_sfn_mac_fid_get(payload, rec_index);
684 *p_lag_id = mlxsw_reg_sfn_mac_lag_lag_id_get(payload, rec_index);
687 /* SPMS - Switch Port MSTP/RSTP State Register
688 * -------------------------------------------
689 * Configures the spanning tree state of a physical port.
691 #define MLXSW_REG_SPMS_ID 0x200D
692 #define MLXSW_REG_SPMS_LEN 0x404
694 static const struct mlxsw_reg_info mlxsw_reg_spms = {
695 .id = MLXSW_REG_SPMS_ID,
696 .len = MLXSW_REG_SPMS_LEN,
699 /* reg_spms_local_port
703 MLXSW_ITEM32(reg, spms, local_port, 0x00, 16, 8);
705 enum mlxsw_reg_spms_state {
706 MLXSW_REG_SPMS_STATE_NO_CHANGE,
707 MLXSW_REG_SPMS_STATE_DISCARDING,
708 MLXSW_REG_SPMS_STATE_LEARNING,
709 MLXSW_REG_SPMS_STATE_FORWARDING,
713 * Spanning tree state of each VLAN ID (VID) of the local port.
714 * 0 - Do not change spanning tree state (used only when writing).
715 * 1 - Discarding. No learning or forwarding to/from this port (default).
716 * 2 - Learning. Port is learning, but not forwarding.
717 * 3 - Forwarding. Port is learning and forwarding.
720 MLXSW_ITEM_BIT_ARRAY(reg, spms, state, 0x04, 0x400, 2);
722 static inline void mlxsw_reg_spms_pack(char *payload, u8 local_port)
724 MLXSW_REG_ZERO(spms, payload);
725 mlxsw_reg_spms_local_port_set(payload, local_port);
728 static inline void mlxsw_reg_spms_vid_pack(char *payload, u16 vid,
729 enum mlxsw_reg_spms_state state)
731 mlxsw_reg_spms_state_set(payload, vid, state);
734 /* SPVID - Switch Port VID
735 * -----------------------
736 * The switch port VID configures the default VID for a port.
738 #define MLXSW_REG_SPVID_ID 0x200E
739 #define MLXSW_REG_SPVID_LEN 0x08
741 static const struct mlxsw_reg_info mlxsw_reg_spvid = {
742 .id = MLXSW_REG_SPVID_ID,
743 .len = MLXSW_REG_SPVID_LEN,
746 /* reg_spvid_local_port
750 MLXSW_ITEM32(reg, spvid, local_port, 0x00, 16, 8);
752 /* reg_spvid_sub_port
753 * Virtual port within the physical port.
754 * Should be set to 0 when virtual ports are not enabled on the port.
757 MLXSW_ITEM32(reg, spvid, sub_port, 0x00, 8, 8);
763 MLXSW_ITEM32(reg, spvid, pvid, 0x04, 0, 12);
765 static inline void mlxsw_reg_spvid_pack(char *payload, u8 local_port, u16 pvid)
767 MLXSW_REG_ZERO(spvid, payload);
768 mlxsw_reg_spvid_local_port_set(payload, local_port);
769 mlxsw_reg_spvid_pvid_set(payload, pvid);
772 /* SPVM - Switch Port VLAN Membership
773 * ----------------------------------
774 * The Switch Port VLAN Membership register configures the VLAN membership
775 * of a port in a VLAN denoted by VID. VLAN membership is managed per
776 * virtual port. The register can be used to add and remove VID(s) from a port.
778 #define MLXSW_REG_SPVM_ID 0x200F
779 #define MLXSW_REG_SPVM_BASE_LEN 0x04 /* base length, without records */
780 #define MLXSW_REG_SPVM_REC_LEN 0x04 /* record length */
781 #define MLXSW_REG_SPVM_REC_MAX_COUNT 256
782 #define MLXSW_REG_SPVM_LEN (MLXSW_REG_SPVM_BASE_LEN + \
783 MLXSW_REG_SPVM_REC_LEN * MLXSW_REG_SPVM_REC_MAX_COUNT)
785 static const struct mlxsw_reg_info mlxsw_reg_spvm = {
786 .id = MLXSW_REG_SPVM_ID,
787 .len = MLXSW_REG_SPVM_LEN,
791 * Priority tagged. If this bit is set, packets forwarded to the port with
792 * untagged VLAN membership (u bit is set) will be tagged with priority tag
796 MLXSW_ITEM32(reg, spvm, pt, 0x00, 31, 1);
799 * Priority Tagged Update Enable. On Write operations, if this bit is cleared,
800 * the pt bit will NOT be updated. To update the pt bit, pte must be set.
803 MLXSW_ITEM32(reg, spvm, pte, 0x00, 30, 1);
805 /* reg_spvm_local_port
809 MLXSW_ITEM32(reg, spvm, local_port, 0x00, 16, 8);
812 * Virtual port within the physical port.
813 * Should be set to 0 when virtual ports are not enabled on the port.
816 MLXSW_ITEM32(reg, spvm, sub_port, 0x00, 8, 8);
819 * Number of records to update. Each record contains: i, e, u, vid.
822 MLXSW_ITEM32(reg, spvm, num_rec, 0x00, 0, 8);
825 * Ingress membership in VLAN ID.
828 MLXSW_ITEM32_INDEXED(reg, spvm, rec_i,
829 MLXSW_REG_SPVM_BASE_LEN, 14, 1,
830 MLXSW_REG_SPVM_REC_LEN, 0, false);
833 * Egress membership in VLAN ID.
836 MLXSW_ITEM32_INDEXED(reg, spvm, rec_e,
837 MLXSW_REG_SPVM_BASE_LEN, 13, 1,
838 MLXSW_REG_SPVM_REC_LEN, 0, false);
841 * Untagged - port is an untagged member - egress transmission uses untagged
845 MLXSW_ITEM32_INDEXED(reg, spvm, rec_u,
846 MLXSW_REG_SPVM_BASE_LEN, 12, 1,
847 MLXSW_REG_SPVM_REC_LEN, 0, false);
850 * Egress membership in VLAN ID.
853 MLXSW_ITEM32_INDEXED(reg, spvm, rec_vid,
854 MLXSW_REG_SPVM_BASE_LEN, 0, 12,
855 MLXSW_REG_SPVM_REC_LEN, 0, false);
857 static inline void mlxsw_reg_spvm_pack(char *payload, u8 local_port,
858 u16 vid_begin, u16 vid_end,
859 bool is_member, bool untagged)
861 int size = vid_end - vid_begin + 1;
864 MLXSW_REG_ZERO(spvm, payload);
865 mlxsw_reg_spvm_local_port_set(payload, local_port);
866 mlxsw_reg_spvm_num_rec_set(payload, size);
868 for (i = 0; i < size; i++) {
869 mlxsw_reg_spvm_rec_i_set(payload, i, is_member);
870 mlxsw_reg_spvm_rec_e_set(payload, i, is_member);
871 mlxsw_reg_spvm_rec_u_set(payload, i, untagged);
872 mlxsw_reg_spvm_rec_vid_set(payload, i, vid_begin + i);
876 /* SFGC - Switch Flooding Group Configuration
877 * ------------------------------------------
878 * The following register controls the association of flooding tables and MIDs
879 * to packet types used for flooding.
881 #define MLXSW_REG_SFGC_ID 0x2011
882 #define MLXSW_REG_SFGC_LEN 0x10
884 static const struct mlxsw_reg_info mlxsw_reg_sfgc = {
885 .id = MLXSW_REG_SFGC_ID,
886 .len = MLXSW_REG_SFGC_LEN,
889 enum mlxsw_reg_sfgc_type {
890 MLXSW_REG_SFGC_TYPE_BROADCAST,
891 MLXSW_REG_SFGC_TYPE_UNKNOWN_UNICAST,
892 MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_IPV4,
893 MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_IPV6,
894 MLXSW_REG_SFGC_TYPE_RESERVED,
895 MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_NON_IP,
896 MLXSW_REG_SFGC_TYPE_IPV4_LINK_LOCAL,
897 MLXSW_REG_SFGC_TYPE_IPV6_ALL_HOST,
898 MLXSW_REG_SFGC_TYPE_MAX,
902 * The traffic type to reach the flooding table.
905 MLXSW_ITEM32(reg, sfgc, type, 0x00, 0, 4);
907 enum mlxsw_reg_sfgc_bridge_type {
908 MLXSW_REG_SFGC_BRIDGE_TYPE_1Q_FID = 0,
909 MLXSW_REG_SFGC_BRIDGE_TYPE_VFID = 1,
912 /* reg_sfgc_bridge_type
915 * Note: SwitchX-2 only supports 802.1Q mode.
917 MLXSW_ITEM32(reg, sfgc, bridge_type, 0x04, 24, 3);
919 enum mlxsw_flood_table_type {
920 MLXSW_REG_SFGC_TABLE_TYPE_VID = 1,
921 MLXSW_REG_SFGC_TABLE_TYPE_SINGLE = 2,
922 MLXSW_REG_SFGC_TABLE_TYPE_ANY = 0,
923 MLXSW_REG_SFGC_TABLE_TYPE_FID_OFFEST = 3,
924 MLXSW_REG_SFGC_TABLE_TYPE_FID = 4,
927 /* reg_sfgc_table_type
928 * See mlxsw_flood_table_type
931 * Note: FID offset and FID types are not supported in SwitchX-2.
933 MLXSW_ITEM32(reg, sfgc, table_type, 0x04, 16, 3);
935 /* reg_sfgc_flood_table
936 * Flooding table index to associate with the specific type on the specific
940 MLXSW_ITEM32(reg, sfgc, flood_table, 0x04, 0, 6);
943 * The multicast ID for the swid. Not supported for Spectrum
946 MLXSW_ITEM32(reg, sfgc, mid, 0x08, 0, 16);
948 /* reg_sfgc_counter_set_type
949 * Counter Set Type for flow counters.
952 MLXSW_ITEM32(reg, sfgc, counter_set_type, 0x0C, 24, 8);
954 /* reg_sfgc_counter_index
955 * Counter Index for flow counters.
958 MLXSW_ITEM32(reg, sfgc, counter_index, 0x0C, 0, 24);
961 mlxsw_reg_sfgc_pack(char *payload, enum mlxsw_reg_sfgc_type type,
962 enum mlxsw_reg_sfgc_bridge_type bridge_type,
963 enum mlxsw_flood_table_type table_type,
964 unsigned int flood_table)
966 MLXSW_REG_ZERO(sfgc, payload);
967 mlxsw_reg_sfgc_type_set(payload, type);
968 mlxsw_reg_sfgc_bridge_type_set(payload, bridge_type);
969 mlxsw_reg_sfgc_table_type_set(payload, table_type);
970 mlxsw_reg_sfgc_flood_table_set(payload, flood_table);
971 mlxsw_reg_sfgc_mid_set(payload, MLXSW_PORT_MID);
974 /* SFTR - Switch Flooding Table Register
975 * -------------------------------------
976 * The switch flooding table is used for flooding packet replication. The table
977 * defines a bit mask of ports for packet replication.
979 #define MLXSW_REG_SFTR_ID 0x2012
980 #define MLXSW_REG_SFTR_LEN 0x420
982 static const struct mlxsw_reg_info mlxsw_reg_sftr = {
983 .id = MLXSW_REG_SFTR_ID,
984 .len = MLXSW_REG_SFTR_LEN,
988 * Switch partition ID with which to associate the port.
991 MLXSW_ITEM32(reg, sftr, swid, 0x00, 24, 8);
993 /* reg_sftr_flood_table
994 * Flooding table index to associate with the specific type on the specific
998 MLXSW_ITEM32(reg, sftr, flood_table, 0x00, 16, 6);
1001 * Index. Used as an index into the Flooding Table in case the table is
1002 * configured to use VID / FID or FID Offset.
1005 MLXSW_ITEM32(reg, sftr, index, 0x00, 0, 16);
1007 /* reg_sftr_table_type
1008 * See mlxsw_flood_table_type
1011 MLXSW_ITEM32(reg, sftr, table_type, 0x04, 16, 3);
1014 * Range of entries to update
1017 MLXSW_ITEM32(reg, sftr, range, 0x04, 0, 16);
1020 * Local port membership (1 bit per port).
1023 MLXSW_ITEM_BIT_ARRAY(reg, sftr, port, 0x20, 0x20, 1);
1025 /* reg_sftr_cpu_port_mask
1026 * CPU port mask (1 bit per port).
1029 MLXSW_ITEM_BIT_ARRAY(reg, sftr, port_mask, 0x220, 0x20, 1);
1031 static inline void mlxsw_reg_sftr_pack(char *payload,
1032 unsigned int flood_table,
1034 enum mlxsw_flood_table_type table_type,
1035 unsigned int range, u8 port, bool set)
1037 MLXSW_REG_ZERO(sftr, payload);
1038 mlxsw_reg_sftr_swid_set(payload, 0);
1039 mlxsw_reg_sftr_flood_table_set(payload, flood_table);
1040 mlxsw_reg_sftr_index_set(payload, index);
1041 mlxsw_reg_sftr_table_type_set(payload, table_type);
1042 mlxsw_reg_sftr_range_set(payload, range);
1043 mlxsw_reg_sftr_port_set(payload, port, set);
1044 mlxsw_reg_sftr_port_mask_set(payload, port, 1);
1047 /* SFDF - Switch Filtering DB Flush
1048 * --------------------------------
1049 * The switch filtering DB flush register is used to flush the FDB.
1050 * Note that FDB notifications are flushed as well.
1052 #define MLXSW_REG_SFDF_ID 0x2013
1053 #define MLXSW_REG_SFDF_LEN 0x14
1055 static const struct mlxsw_reg_info mlxsw_reg_sfdf = {
1056 .id = MLXSW_REG_SFDF_ID,
1057 .len = MLXSW_REG_SFDF_LEN,
1061 * Switch partition ID.
1064 MLXSW_ITEM32(reg, sfdf, swid, 0x00, 24, 8);
1066 enum mlxsw_reg_sfdf_flush_type {
1067 MLXSW_REG_SFDF_FLUSH_PER_SWID,
1068 MLXSW_REG_SFDF_FLUSH_PER_FID,
1069 MLXSW_REG_SFDF_FLUSH_PER_PORT,
1070 MLXSW_REG_SFDF_FLUSH_PER_PORT_AND_FID,
1071 MLXSW_REG_SFDF_FLUSH_PER_LAG,
1072 MLXSW_REG_SFDF_FLUSH_PER_LAG_AND_FID,
1075 /* reg_sfdf_flush_type
1077 * 0 - All SWID dynamic entries are flushed.
1078 * 1 - All FID dynamic entries are flushed.
1079 * 2 - All dynamic entries pointing to port are flushed.
1080 * 3 - All FID dynamic entries pointing to port are flushed.
1081 * 4 - All dynamic entries pointing to LAG are flushed.
1082 * 5 - All FID dynamic entries pointing to LAG are flushed.
1085 MLXSW_ITEM32(reg, sfdf, flush_type, 0x04, 28, 4);
1087 /* reg_sfdf_flush_static
1089 * 0 - Flush only dynamic entries.
1090 * 1 - Flush both dynamic and static entries.
1093 MLXSW_ITEM32(reg, sfdf, flush_static, 0x04, 24, 1);
1095 static inline void mlxsw_reg_sfdf_pack(char *payload,
1096 enum mlxsw_reg_sfdf_flush_type type)
1098 MLXSW_REG_ZERO(sfdf, payload);
1099 mlxsw_reg_sfdf_flush_type_set(payload, type);
1100 mlxsw_reg_sfdf_flush_static_set(payload, true);
1107 MLXSW_ITEM32(reg, sfdf, fid, 0x0C, 0, 16);
1109 /* reg_sfdf_system_port
1113 MLXSW_ITEM32(reg, sfdf, system_port, 0x0C, 0, 16);
1115 /* reg_sfdf_port_fid_system_port
1116 * Port to flush, pointed to by FID.
1119 MLXSW_ITEM32(reg, sfdf, port_fid_system_port, 0x08, 0, 16);
1125 MLXSW_ITEM32(reg, sfdf, lag_id, 0x0C, 0, 10);
1127 /* reg_sfdf_lag_fid_lag_id
1128 * LAG ID to flush, pointed to by FID.
1131 MLXSW_ITEM32(reg, sfdf, lag_fid_lag_id, 0x08, 0, 10);
1133 /* SLDR - Switch LAG Descriptor Register
1134 * -----------------------------------------
1135 * The switch LAG descriptor register is populated by LAG descriptors.
1136 * Each LAG descriptor is indexed by lag_id. The LAG ID runs from 0 to
1139 #define MLXSW_REG_SLDR_ID 0x2014
1140 #define MLXSW_REG_SLDR_LEN 0x0C /* counting in only one port in list */
1142 static const struct mlxsw_reg_info mlxsw_reg_sldr = {
1143 .id = MLXSW_REG_SLDR_ID,
1144 .len = MLXSW_REG_SLDR_LEN,
1147 enum mlxsw_reg_sldr_op {
1148 /* Indicates a creation of a new LAG-ID, lag_id must be valid */
1149 MLXSW_REG_SLDR_OP_LAG_CREATE,
1150 MLXSW_REG_SLDR_OP_LAG_DESTROY,
1151 /* Ports that appear in the list have the Distributor enabled */
1152 MLXSW_REG_SLDR_OP_LAG_ADD_PORT_LIST,
1153 /* Removes ports from the disributor list */
1154 MLXSW_REG_SLDR_OP_LAG_REMOVE_PORT_LIST,
1161 MLXSW_ITEM32(reg, sldr, op, 0x00, 29, 3);
1164 * LAG identifier. The lag_id is the index into the LAG descriptor table.
1167 MLXSW_ITEM32(reg, sldr, lag_id, 0x00, 0, 10);
1169 static inline void mlxsw_reg_sldr_lag_create_pack(char *payload, u8 lag_id)
1171 MLXSW_REG_ZERO(sldr, payload);
1172 mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_CREATE);
1173 mlxsw_reg_sldr_lag_id_set(payload, lag_id);
1176 static inline void mlxsw_reg_sldr_lag_destroy_pack(char *payload, u8 lag_id)
1178 MLXSW_REG_ZERO(sldr, payload);
1179 mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_DESTROY);
1180 mlxsw_reg_sldr_lag_id_set(payload, lag_id);
1183 /* reg_sldr_num_ports
1184 * The number of member ports of the LAG.
1185 * Reserved for Create / Destroy operations
1186 * For Add / Remove operations - indicates the number of ports in the list.
1189 MLXSW_ITEM32(reg, sldr, num_ports, 0x04, 24, 8);
1191 /* reg_sldr_system_port
1195 MLXSW_ITEM32_INDEXED(reg, sldr, system_port, 0x08, 0, 16, 4, 0, false);
1197 static inline void mlxsw_reg_sldr_lag_add_port_pack(char *payload, u8 lag_id,
1200 MLXSW_REG_ZERO(sldr, payload);
1201 mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_ADD_PORT_LIST);
1202 mlxsw_reg_sldr_lag_id_set(payload, lag_id);
1203 mlxsw_reg_sldr_num_ports_set(payload, 1);
1204 mlxsw_reg_sldr_system_port_set(payload, 0, local_port);
1207 static inline void mlxsw_reg_sldr_lag_remove_port_pack(char *payload, u8 lag_id,
1210 MLXSW_REG_ZERO(sldr, payload);
1211 mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_REMOVE_PORT_LIST);
1212 mlxsw_reg_sldr_lag_id_set(payload, lag_id);
1213 mlxsw_reg_sldr_num_ports_set(payload, 1);
1214 mlxsw_reg_sldr_system_port_set(payload, 0, local_port);
1217 /* SLCR - Switch LAG Configuration 2 Register
1218 * -------------------------------------------
1219 * The Switch LAG Configuration register is used for configuring the
1220 * LAG properties of the switch.
1222 #define MLXSW_REG_SLCR_ID 0x2015
1223 #define MLXSW_REG_SLCR_LEN 0x10
1225 static const struct mlxsw_reg_info mlxsw_reg_slcr = {
1226 .id = MLXSW_REG_SLCR_ID,
1227 .len = MLXSW_REG_SLCR_LEN,
1230 enum mlxsw_reg_slcr_pp {
1231 /* Global Configuration (for all ports) */
1232 MLXSW_REG_SLCR_PP_GLOBAL,
1233 /* Per port configuration, based on local_port field */
1234 MLXSW_REG_SLCR_PP_PER_PORT,
1238 * Per Port Configuration
1239 * Note: Reading at Global mode results in reading port 1 configuration.
1242 MLXSW_ITEM32(reg, slcr, pp, 0x00, 24, 1);
1244 /* reg_slcr_local_port
1246 * Supported from CPU port
1247 * Not supported from router port
1248 * Reserved when pp = Global Configuration
1251 MLXSW_ITEM32(reg, slcr, local_port, 0x00, 16, 8);
1253 enum mlxsw_reg_slcr_type {
1254 MLXSW_REG_SLCR_TYPE_CRC, /* default */
1255 MLXSW_REG_SLCR_TYPE_XOR,
1256 MLXSW_REG_SLCR_TYPE_RANDOM,
1263 MLXSW_ITEM32(reg, slcr, type, 0x00, 0, 4);
1266 #define MLXSW_REG_SLCR_LAG_HASH_IN_PORT BIT(0)
1267 /* SMAC - for IPv4 and IPv6 packets */
1268 #define MLXSW_REG_SLCR_LAG_HASH_SMAC_IP BIT(1)
1269 /* SMAC - for non-IP packets */
1270 #define MLXSW_REG_SLCR_LAG_HASH_SMAC_NONIP BIT(2)
1271 #define MLXSW_REG_SLCR_LAG_HASH_SMAC \
1272 (MLXSW_REG_SLCR_LAG_HASH_SMAC_IP | \
1273 MLXSW_REG_SLCR_LAG_HASH_SMAC_NONIP)
1274 /* DMAC - for IPv4 and IPv6 packets */
1275 #define MLXSW_REG_SLCR_LAG_HASH_DMAC_IP BIT(3)
1276 /* DMAC - for non-IP packets */
1277 #define MLXSW_REG_SLCR_LAG_HASH_DMAC_NONIP BIT(4)
1278 #define MLXSW_REG_SLCR_LAG_HASH_DMAC \
1279 (MLXSW_REG_SLCR_LAG_HASH_DMAC_IP | \
1280 MLXSW_REG_SLCR_LAG_HASH_DMAC_NONIP)
1281 /* Ethertype - for IPv4 and IPv6 packets */
1282 #define MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_IP BIT(5)
1283 /* Ethertype - for non-IP packets */
1284 #define MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_NONIP BIT(6)
1285 #define MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE \
1286 (MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_IP | \
1287 MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_NONIP)
1288 /* VLAN ID - for IPv4 and IPv6 packets */
1289 #define MLXSW_REG_SLCR_LAG_HASH_VLANID_IP BIT(7)
1290 /* VLAN ID - for non-IP packets */
1291 #define MLXSW_REG_SLCR_LAG_HASH_VLANID_NONIP BIT(8)
1292 #define MLXSW_REG_SLCR_LAG_HASH_VLANID \
1293 (MLXSW_REG_SLCR_LAG_HASH_VLANID_IP | \
1294 MLXSW_REG_SLCR_LAG_HASH_VLANID_NONIP)
1295 /* Source IP address (can be IPv4 or IPv6) */
1296 #define MLXSW_REG_SLCR_LAG_HASH_SIP BIT(9)
1297 /* Destination IP address (can be IPv4 or IPv6) */
1298 #define MLXSW_REG_SLCR_LAG_HASH_DIP BIT(10)
1299 /* TCP/UDP source port */
1300 #define MLXSW_REG_SLCR_LAG_HASH_SPORT BIT(11)
1301 /* TCP/UDP destination port*/
1302 #define MLXSW_REG_SLCR_LAG_HASH_DPORT BIT(12)
1303 /* IPv4 Protocol/IPv6 Next Header */
1304 #define MLXSW_REG_SLCR_LAG_HASH_IPPROTO BIT(13)
1305 /* IPv6 Flow label */
1306 #define MLXSW_REG_SLCR_LAG_HASH_FLOWLABEL BIT(14)
1307 /* SID - FCoE source ID */
1308 #define MLXSW_REG_SLCR_LAG_HASH_FCOE_SID BIT(15)
1309 /* DID - FCoE destination ID */
1310 #define MLXSW_REG_SLCR_LAG_HASH_FCOE_DID BIT(16)
1311 /* OXID - FCoE originator exchange ID */
1312 #define MLXSW_REG_SLCR_LAG_HASH_FCOE_OXID BIT(17)
1313 /* Destination QP number - for RoCE packets */
1314 #define MLXSW_REG_SLCR_LAG_HASH_ROCE_DQP BIT(19)
1316 /* reg_slcr_lag_hash
1317 * LAG hashing configuration. This is a bitmask, in which each set
1318 * bit includes the corresponding item in the LAG hash calculation.
1319 * The default lag_hash contains SMAC, DMAC, VLANID and
1320 * Ethertype (for all packet types).
1323 MLXSW_ITEM32(reg, slcr, lag_hash, 0x04, 0, 20);
1325 static inline void mlxsw_reg_slcr_pack(char *payload, u16 lag_hash)
1327 MLXSW_REG_ZERO(slcr, payload);
1328 mlxsw_reg_slcr_pp_set(payload, MLXSW_REG_SLCR_PP_GLOBAL);
1329 mlxsw_reg_slcr_type_set(payload, MLXSW_REG_SLCR_TYPE_XOR);
1330 mlxsw_reg_slcr_lag_hash_set(payload, lag_hash);
1333 /* SLCOR - Switch LAG Collector Register
1334 * -------------------------------------
1335 * The Switch LAG Collector register controls the Local Port membership
1336 * in a LAG and enablement of the collector.
1338 #define MLXSW_REG_SLCOR_ID 0x2016
1339 #define MLXSW_REG_SLCOR_LEN 0x10
1341 static const struct mlxsw_reg_info mlxsw_reg_slcor = {
1342 .id = MLXSW_REG_SLCOR_ID,
1343 .len = MLXSW_REG_SLCOR_LEN,
1346 enum mlxsw_reg_slcor_col {
1347 /* Port is added with collector disabled */
1348 MLXSW_REG_SLCOR_COL_LAG_ADD_PORT,
1349 MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_ENABLED,
1350 MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_DISABLED,
1351 MLXSW_REG_SLCOR_COL_LAG_REMOVE_PORT,
1355 * Collector configuration
1358 MLXSW_ITEM32(reg, slcor, col, 0x00, 30, 2);
1360 /* reg_slcor_local_port
1362 * Not supported for CPU port
1365 MLXSW_ITEM32(reg, slcor, local_port, 0x00, 16, 8);
1368 * LAG Identifier. Index into the LAG descriptor table.
1371 MLXSW_ITEM32(reg, slcor, lag_id, 0x00, 0, 10);
1373 /* reg_slcor_port_index
1374 * Port index in the LAG list. Only valid on Add Port to LAG col.
1375 * Valid range is from 0 to cap_max_lag_members-1
1378 MLXSW_ITEM32(reg, slcor, port_index, 0x04, 0, 10);
1380 static inline void mlxsw_reg_slcor_pack(char *payload,
1381 u8 local_port, u16 lag_id,
1382 enum mlxsw_reg_slcor_col col)
1384 MLXSW_REG_ZERO(slcor, payload);
1385 mlxsw_reg_slcor_col_set(payload, col);
1386 mlxsw_reg_slcor_local_port_set(payload, local_port);
1387 mlxsw_reg_slcor_lag_id_set(payload, lag_id);
1390 static inline void mlxsw_reg_slcor_port_add_pack(char *payload,
1391 u8 local_port, u16 lag_id,
1394 mlxsw_reg_slcor_pack(payload, local_port, lag_id,
1395 MLXSW_REG_SLCOR_COL_LAG_ADD_PORT);
1396 mlxsw_reg_slcor_port_index_set(payload, port_index);
1399 static inline void mlxsw_reg_slcor_port_remove_pack(char *payload,
1400 u8 local_port, u16 lag_id)
1402 mlxsw_reg_slcor_pack(payload, local_port, lag_id,
1403 MLXSW_REG_SLCOR_COL_LAG_REMOVE_PORT);
1406 static inline void mlxsw_reg_slcor_col_enable_pack(char *payload,
1407 u8 local_port, u16 lag_id)
1409 mlxsw_reg_slcor_pack(payload, local_port, lag_id,
1410 MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_ENABLED);
1413 static inline void mlxsw_reg_slcor_col_disable_pack(char *payload,
1414 u8 local_port, u16 lag_id)
1416 mlxsw_reg_slcor_pack(payload, local_port, lag_id,
1417 MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_ENABLED);
1420 /* SPMLR - Switch Port MAC Learning Register
1421 * -----------------------------------------
1422 * Controls the Switch MAC learning policy per port.
1424 #define MLXSW_REG_SPMLR_ID 0x2018
1425 #define MLXSW_REG_SPMLR_LEN 0x8
1427 static const struct mlxsw_reg_info mlxsw_reg_spmlr = {
1428 .id = MLXSW_REG_SPMLR_ID,
1429 .len = MLXSW_REG_SPMLR_LEN,
1432 /* reg_spmlr_local_port
1433 * Local port number.
1436 MLXSW_ITEM32(reg, spmlr, local_port, 0x00, 16, 8);
1438 /* reg_spmlr_sub_port
1439 * Virtual port within the physical port.
1440 * Should be set to 0 when virtual ports are not enabled on the port.
1443 MLXSW_ITEM32(reg, spmlr, sub_port, 0x00, 8, 8);
1445 enum mlxsw_reg_spmlr_learn_mode {
1446 MLXSW_REG_SPMLR_LEARN_MODE_DISABLE = 0,
1447 MLXSW_REG_SPMLR_LEARN_MODE_ENABLE = 2,
1448 MLXSW_REG_SPMLR_LEARN_MODE_SEC = 3,
1451 /* reg_spmlr_learn_mode
1452 * Learning mode on the port.
1453 * 0 - Learning disabled.
1454 * 2 - Learning enabled.
1455 * 3 - Security mode.
1457 * In security mode the switch does not learn MACs on the port, but uses the
1458 * SMAC to see if it exists on another ingress port. If so, the packet is
1459 * classified as a bad packet and is discarded unless the software registers
1460 * to receive port security error packets usign HPKT.
1462 MLXSW_ITEM32(reg, spmlr, learn_mode, 0x04, 30, 2);
1464 static inline void mlxsw_reg_spmlr_pack(char *payload, u8 local_port,
1465 enum mlxsw_reg_spmlr_learn_mode mode)
1467 MLXSW_REG_ZERO(spmlr, payload);
1468 mlxsw_reg_spmlr_local_port_set(payload, local_port);
1469 mlxsw_reg_spmlr_sub_port_set(payload, 0);
1470 mlxsw_reg_spmlr_learn_mode_set(payload, mode);
1473 /* SVFA - Switch VID to FID Allocation Register
1474 * --------------------------------------------
1475 * Controls the VID to FID mapping and {Port, VID} to FID mapping for
1476 * virtualized ports.
1478 #define MLXSW_REG_SVFA_ID 0x201C
1479 #define MLXSW_REG_SVFA_LEN 0x10
1481 static const struct mlxsw_reg_info mlxsw_reg_svfa = {
1482 .id = MLXSW_REG_SVFA_ID,
1483 .len = MLXSW_REG_SVFA_LEN,
1487 * Switch partition ID.
1490 MLXSW_ITEM32(reg, svfa, swid, 0x00, 24, 8);
1492 /* reg_svfa_local_port
1493 * Local port number.
1496 * Note: Reserved for 802.1Q FIDs.
1498 MLXSW_ITEM32(reg, svfa, local_port, 0x00, 16, 8);
1500 enum mlxsw_reg_svfa_mt {
1501 MLXSW_REG_SVFA_MT_VID_TO_FID,
1502 MLXSW_REG_SVFA_MT_PORT_VID_TO_FID,
1505 /* reg_svfa_mapping_table
1508 * 1 - {Port, VID} to FID
1511 * Note: Reserved for SwitchX-2.
1513 MLXSW_ITEM32(reg, svfa, mapping_table, 0x00, 8, 3);
1520 * Note: Reserved for SwitchX-2.
1522 MLXSW_ITEM32(reg, svfa, v, 0x00, 0, 1);
1528 MLXSW_ITEM32(reg, svfa, fid, 0x04, 16, 16);
1534 MLXSW_ITEM32(reg, svfa, vid, 0x04, 0, 12);
1536 /* reg_svfa_counter_set_type
1537 * Counter set type for flow counters.
1540 * Note: Reserved for SwitchX-2.
1542 MLXSW_ITEM32(reg, svfa, counter_set_type, 0x08, 24, 8);
1544 /* reg_svfa_counter_index
1545 * Counter index for flow counters.
1548 * Note: Reserved for SwitchX-2.
1550 MLXSW_ITEM32(reg, svfa, counter_index, 0x08, 0, 24);
1552 static inline void mlxsw_reg_svfa_pack(char *payload, u8 local_port,
1553 enum mlxsw_reg_svfa_mt mt, bool valid,
1556 MLXSW_REG_ZERO(svfa, payload);
1557 local_port = mt == MLXSW_REG_SVFA_MT_VID_TO_FID ? 0 : local_port;
1558 mlxsw_reg_svfa_swid_set(payload, 0);
1559 mlxsw_reg_svfa_local_port_set(payload, local_port);
1560 mlxsw_reg_svfa_mapping_table_set(payload, mt);
1561 mlxsw_reg_svfa_v_set(payload, valid);
1562 mlxsw_reg_svfa_fid_set(payload, fid);
1563 mlxsw_reg_svfa_vid_set(payload, vid);
1566 /* SVPE - Switch Virtual-Port Enabling Register
1567 * --------------------------------------------
1568 * Enables port virtualization.
1570 #define MLXSW_REG_SVPE_ID 0x201E
1571 #define MLXSW_REG_SVPE_LEN 0x4
1573 static const struct mlxsw_reg_info mlxsw_reg_svpe = {
1574 .id = MLXSW_REG_SVPE_ID,
1575 .len = MLXSW_REG_SVPE_LEN,
1578 /* reg_svpe_local_port
1582 * Note: CPU port is not supported (uses VLAN mode only).
1584 MLXSW_ITEM32(reg, svpe, local_port, 0x00, 16, 8);
1587 * Virtual port enable.
1588 * 0 - Disable, VLAN mode (VID to FID).
1589 * 1 - Enable, Virtual port mode ({Port, VID} to FID).
1592 MLXSW_ITEM32(reg, svpe, vp_en, 0x00, 8, 1);
1594 static inline void mlxsw_reg_svpe_pack(char *payload, u8 local_port,
1597 MLXSW_REG_ZERO(svpe, payload);
1598 mlxsw_reg_svpe_local_port_set(payload, local_port);
1599 mlxsw_reg_svpe_vp_en_set(payload, enable);
1602 /* SFMR - Switch FID Management Register
1603 * -------------------------------------
1604 * Creates and configures FIDs.
1606 #define MLXSW_REG_SFMR_ID 0x201F
1607 #define MLXSW_REG_SFMR_LEN 0x18
1609 static const struct mlxsw_reg_info mlxsw_reg_sfmr = {
1610 .id = MLXSW_REG_SFMR_ID,
1611 .len = MLXSW_REG_SFMR_LEN,
1614 enum mlxsw_reg_sfmr_op {
1615 MLXSW_REG_SFMR_OP_CREATE_FID,
1616 MLXSW_REG_SFMR_OP_DESTROY_FID,
1621 * 0 - Create or edit FID.
1625 MLXSW_ITEM32(reg, sfmr, op, 0x00, 24, 4);
1631 MLXSW_ITEM32(reg, sfmr, fid, 0x00, 0, 16);
1633 /* reg_sfmr_fid_offset
1635 * Used to point into the flooding table selected by SFGC register if
1636 * the table is of type FID-Offset. Otherwise, this field is reserved.
1639 MLXSW_ITEM32(reg, sfmr, fid_offset, 0x08, 0, 16);
1642 * Valid Tunnel Flood Pointer.
1643 * If not set, then nve_tunnel_flood_ptr is reserved and considered NULL.
1646 * Note: Reserved for 802.1Q FIDs.
1648 MLXSW_ITEM32(reg, sfmr, vtfp, 0x0C, 31, 1);
1650 /* reg_sfmr_nve_tunnel_flood_ptr
1651 * Underlay Flooding and BC Pointer.
1652 * Used as a pointer to the first entry of the group based link lists of
1653 * flooding or BC entries (for NVE tunnels).
1656 MLXSW_ITEM32(reg, sfmr, nve_tunnel_flood_ptr, 0x0C, 0, 24);
1660 * If not set, then vni is reserved.
1663 * Note: Reserved for 802.1Q FIDs.
1665 MLXSW_ITEM32(reg, sfmr, vv, 0x10, 31, 1);
1668 * Virtual Network Identifier.
1671 * Note: A given VNI can only be assigned to one FID.
1673 MLXSW_ITEM32(reg, sfmr, vni, 0x10, 0, 24);
1675 static inline void mlxsw_reg_sfmr_pack(char *payload,
1676 enum mlxsw_reg_sfmr_op op, u16 fid,
1679 MLXSW_REG_ZERO(sfmr, payload);
1680 mlxsw_reg_sfmr_op_set(payload, op);
1681 mlxsw_reg_sfmr_fid_set(payload, fid);
1682 mlxsw_reg_sfmr_fid_offset_set(payload, fid_offset);
1683 mlxsw_reg_sfmr_vtfp_set(payload, false);
1684 mlxsw_reg_sfmr_vv_set(payload, false);
1687 /* SPVMLR - Switch Port VLAN MAC Learning Register
1688 * -----------------------------------------------
1689 * Controls the switch MAC learning policy per {Port, VID}.
1691 #define MLXSW_REG_SPVMLR_ID 0x2020
1692 #define MLXSW_REG_SPVMLR_BASE_LEN 0x04 /* base length, without records */
1693 #define MLXSW_REG_SPVMLR_REC_LEN 0x04 /* record length */
1694 #define MLXSW_REG_SPVMLR_REC_MAX_COUNT 256
1695 #define MLXSW_REG_SPVMLR_LEN (MLXSW_REG_SPVMLR_BASE_LEN + \
1696 MLXSW_REG_SPVMLR_REC_LEN * \
1697 MLXSW_REG_SPVMLR_REC_MAX_COUNT)
1699 static const struct mlxsw_reg_info mlxsw_reg_spvmlr = {
1700 .id = MLXSW_REG_SPVMLR_ID,
1701 .len = MLXSW_REG_SPVMLR_LEN,
1704 /* reg_spvmlr_local_port
1705 * Local ingress port.
1708 * Note: CPU port is not supported.
1710 MLXSW_ITEM32(reg, spvmlr, local_port, 0x00, 16, 8);
1712 /* reg_spvmlr_num_rec
1713 * Number of records to update.
1716 MLXSW_ITEM32(reg, spvmlr, num_rec, 0x00, 0, 8);
1718 /* reg_spvmlr_rec_learn_enable
1719 * 0 - Disable learning for {Port, VID}.
1720 * 1 - Enable learning for {Port, VID}.
1723 MLXSW_ITEM32_INDEXED(reg, spvmlr, rec_learn_enable, MLXSW_REG_SPVMLR_BASE_LEN,
1724 31, 1, MLXSW_REG_SPVMLR_REC_LEN, 0x00, false);
1726 /* reg_spvmlr_rec_vid
1727 * VLAN ID to be added/removed from port or for querying.
1730 MLXSW_ITEM32_INDEXED(reg, spvmlr, rec_vid, MLXSW_REG_SPVMLR_BASE_LEN, 0, 12,
1731 MLXSW_REG_SPVMLR_REC_LEN, 0x00, false);
1733 static inline void mlxsw_reg_spvmlr_pack(char *payload, u8 local_port,
1734 u16 vid_begin, u16 vid_end,
1737 int num_rec = vid_end - vid_begin + 1;
1740 WARN_ON(num_rec < 1 || num_rec > MLXSW_REG_SPVMLR_REC_MAX_COUNT);
1742 MLXSW_REG_ZERO(spvmlr, payload);
1743 mlxsw_reg_spvmlr_local_port_set(payload, local_port);
1744 mlxsw_reg_spvmlr_num_rec_set(payload, num_rec);
1746 for (i = 0; i < num_rec; i++) {
1747 mlxsw_reg_spvmlr_rec_learn_enable_set(payload, i, learn_enable);
1748 mlxsw_reg_spvmlr_rec_vid_set(payload, i, vid_begin + i);
1752 /* PMLP - Ports Module to Local Port Register
1753 * ------------------------------------------
1754 * Configures the assignment of modules to local ports.
1756 #define MLXSW_REG_PMLP_ID 0x5002
1757 #define MLXSW_REG_PMLP_LEN 0x40
1759 static const struct mlxsw_reg_info mlxsw_reg_pmlp = {
1760 .id = MLXSW_REG_PMLP_ID,
1761 .len = MLXSW_REG_PMLP_LEN,
1765 * 0 - Tx value is used for both Tx and Rx.
1766 * 1 - Rx value is taken from a separte field.
1769 MLXSW_ITEM32(reg, pmlp, rxtx, 0x00, 31, 1);
1771 /* reg_pmlp_local_port
1772 * Local port number.
1775 MLXSW_ITEM32(reg, pmlp, local_port, 0x00, 16, 8);
1778 * 0 - Unmap local port.
1779 * 1 - Lane 0 is used.
1780 * 2 - Lanes 0 and 1 are used.
1781 * 4 - Lanes 0, 1, 2 and 3 are used.
1784 MLXSW_ITEM32(reg, pmlp, width, 0x00, 0, 8);
1790 MLXSW_ITEM32_INDEXED(reg, pmlp, module, 0x04, 0, 8, 0x04, 0x00, false);
1793 * Tx Lane. When rxtx field is cleared, this field is used for Rx as well.
1796 MLXSW_ITEM32_INDEXED(reg, pmlp, tx_lane, 0x04, 16, 2, 0x04, 0x00, false);
1799 * Rx Lane. When rxtx field is cleared, this field is ignored and Rx lane is
1803 MLXSW_ITEM32_INDEXED(reg, pmlp, rx_lane, 0x04, 24, 2, 0x04, 0x00, false);
1805 static inline void mlxsw_reg_pmlp_pack(char *payload, u8 local_port)
1807 MLXSW_REG_ZERO(pmlp, payload);
1808 mlxsw_reg_pmlp_local_port_set(payload, local_port);
1811 /* PMTU - Port MTU Register
1812 * ------------------------
1813 * Configures and reports the port MTU.
1815 #define MLXSW_REG_PMTU_ID 0x5003
1816 #define MLXSW_REG_PMTU_LEN 0x10
1818 static const struct mlxsw_reg_info mlxsw_reg_pmtu = {
1819 .id = MLXSW_REG_PMTU_ID,
1820 .len = MLXSW_REG_PMTU_LEN,
1823 /* reg_pmtu_local_port
1824 * Local port number.
1827 MLXSW_ITEM32(reg, pmtu, local_port, 0x00, 16, 8);
1831 * When port type (e.g. Ethernet) is configured, the relevant MTU is
1832 * reported, otherwise the minimum between the max_mtu of the different
1833 * types is reported.
1836 MLXSW_ITEM32(reg, pmtu, max_mtu, 0x04, 16, 16);
1838 /* reg_pmtu_admin_mtu
1839 * MTU value to set port to. Must be smaller or equal to max_mtu.
1840 * Note: If port type is Infiniband, then port must be disabled, when its
1844 MLXSW_ITEM32(reg, pmtu, admin_mtu, 0x08, 16, 16);
1846 /* reg_pmtu_oper_mtu
1847 * The actual MTU configured on the port. Packets exceeding this size
1849 * Note: In Ethernet and FC oper_mtu == admin_mtu, however, in Infiniband
1850 * oper_mtu might be smaller than admin_mtu.
1853 MLXSW_ITEM32(reg, pmtu, oper_mtu, 0x0C, 16, 16);
1855 static inline void mlxsw_reg_pmtu_pack(char *payload, u8 local_port,
1858 MLXSW_REG_ZERO(pmtu, payload);
1859 mlxsw_reg_pmtu_local_port_set(payload, local_port);
1860 mlxsw_reg_pmtu_max_mtu_set(payload, 0);
1861 mlxsw_reg_pmtu_admin_mtu_set(payload, new_mtu);
1862 mlxsw_reg_pmtu_oper_mtu_set(payload, 0);
1865 /* PTYS - Port Type and Speed Register
1866 * -----------------------------------
1867 * Configures and reports the port speed type.
1869 * Note: When set while the link is up, the changes will not take effect
1870 * until the port transitions from down to up state.
1872 #define MLXSW_REG_PTYS_ID 0x5004
1873 #define MLXSW_REG_PTYS_LEN 0x40
1875 static const struct mlxsw_reg_info mlxsw_reg_ptys = {
1876 .id = MLXSW_REG_PTYS_ID,
1877 .len = MLXSW_REG_PTYS_LEN,
1880 /* reg_ptys_local_port
1881 * Local port number.
1884 MLXSW_ITEM32(reg, ptys, local_port, 0x00, 16, 8);
1886 #define MLXSW_REG_PTYS_PROTO_MASK_ETH BIT(2)
1888 /* reg_ptys_proto_mask
1889 * Protocol mask. Indicates which protocol is used.
1891 * 1 - Fibre Channel.
1895 MLXSW_ITEM32(reg, ptys, proto_mask, 0x00, 0, 3);
1897 #define MLXSW_REG_PTYS_ETH_SPEED_SGMII BIT(0)
1898 #define MLXSW_REG_PTYS_ETH_SPEED_1000BASE_KX BIT(1)
1899 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CX4 BIT(2)
1900 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KX4 BIT(3)
1901 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KR BIT(4)
1902 #define MLXSW_REG_PTYS_ETH_SPEED_20GBASE_KR2 BIT(5)
1903 #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4 BIT(6)
1904 #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_KR4 BIT(7)
1905 #define MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4 BIT(8)
1906 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CR BIT(12)
1907 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_SR BIT(13)
1908 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_ER_LR BIT(14)
1909 #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_SR4 BIT(15)
1910 #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_LR4_ER4 BIT(16)
1911 #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR4 BIT(19)
1912 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4 BIT(20)
1913 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4 BIT(21)
1914 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4 BIT(22)
1915 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4 BIT(23)
1916 #define MLXSW_REG_PTYS_ETH_SPEED_100BASE_TX BIT(24)
1917 #define MLXSW_REG_PTYS_ETH_SPEED_100BASE_T BIT(25)
1918 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_T BIT(26)
1919 #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_CR BIT(27)
1920 #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_KR BIT(28)
1921 #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_SR BIT(29)
1922 #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_CR2 BIT(30)
1923 #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR2 BIT(31)
1925 /* reg_ptys_eth_proto_cap
1926 * Ethernet port supported speeds and protocols.
1929 MLXSW_ITEM32(reg, ptys, eth_proto_cap, 0x0C, 0, 32);
1931 /* reg_ptys_eth_proto_admin
1932 * Speed and protocol to set port to.
1935 MLXSW_ITEM32(reg, ptys, eth_proto_admin, 0x18, 0, 32);
1937 /* reg_ptys_eth_proto_oper
1938 * The current speed and protocol configured for the port.
1941 MLXSW_ITEM32(reg, ptys, eth_proto_oper, 0x24, 0, 32);
1943 static inline void mlxsw_reg_ptys_pack(char *payload, u8 local_port,
1946 MLXSW_REG_ZERO(ptys, payload);
1947 mlxsw_reg_ptys_local_port_set(payload, local_port);
1948 mlxsw_reg_ptys_proto_mask_set(payload, MLXSW_REG_PTYS_PROTO_MASK_ETH);
1949 mlxsw_reg_ptys_eth_proto_admin_set(payload, proto_admin);
1952 static inline void mlxsw_reg_ptys_unpack(char *payload, u32 *p_eth_proto_cap,
1953 u32 *p_eth_proto_adm,
1954 u32 *p_eth_proto_oper)
1956 if (p_eth_proto_cap)
1957 *p_eth_proto_cap = mlxsw_reg_ptys_eth_proto_cap_get(payload);
1958 if (p_eth_proto_adm)
1959 *p_eth_proto_adm = mlxsw_reg_ptys_eth_proto_admin_get(payload);
1960 if (p_eth_proto_oper)
1961 *p_eth_proto_oper = mlxsw_reg_ptys_eth_proto_oper_get(payload);
1964 /* PPAD - Port Physical Address Register
1965 * -------------------------------------
1966 * The PPAD register configures the per port physical MAC address.
1968 #define MLXSW_REG_PPAD_ID 0x5005
1969 #define MLXSW_REG_PPAD_LEN 0x10
1971 static const struct mlxsw_reg_info mlxsw_reg_ppad = {
1972 .id = MLXSW_REG_PPAD_ID,
1973 .len = MLXSW_REG_PPAD_LEN,
1976 /* reg_ppad_single_base_mac
1977 * 0: base_mac, local port should be 0 and mac[7:0] is
1978 * reserved. HW will set incremental
1979 * 1: single_mac - mac of the local_port
1982 MLXSW_ITEM32(reg, ppad, single_base_mac, 0x00, 28, 1);
1984 /* reg_ppad_local_port
1985 * port number, if single_base_mac = 0 then local_port is reserved
1988 MLXSW_ITEM32(reg, ppad, local_port, 0x00, 16, 8);
1991 * If single_base_mac = 0 - base MAC address, mac[7:0] is reserved.
1992 * If single_base_mac = 1 - the per port MAC address
1995 MLXSW_ITEM_BUF(reg, ppad, mac, 0x02, 6);
1997 static inline void mlxsw_reg_ppad_pack(char *payload, bool single_base_mac,
2000 MLXSW_REG_ZERO(ppad, payload);
2001 mlxsw_reg_ppad_single_base_mac_set(payload, !!single_base_mac);
2002 mlxsw_reg_ppad_local_port_set(payload, local_port);
2005 /* PAOS - Ports Administrative and Operational Status Register
2006 * -----------------------------------------------------------
2007 * Configures and retrieves per port administrative and operational status.
2009 #define MLXSW_REG_PAOS_ID 0x5006
2010 #define MLXSW_REG_PAOS_LEN 0x10
2012 static const struct mlxsw_reg_info mlxsw_reg_paos = {
2013 .id = MLXSW_REG_PAOS_ID,
2014 .len = MLXSW_REG_PAOS_LEN,
2018 * Switch partition ID with which to associate the port.
2019 * Note: while external ports uses unique local port numbers (and thus swid is
2020 * redundant), router ports use the same local port number where swid is the
2021 * only indication for the relevant port.
2024 MLXSW_ITEM32(reg, paos, swid, 0x00, 24, 8);
2026 /* reg_paos_local_port
2027 * Local port number.
2030 MLXSW_ITEM32(reg, paos, local_port, 0x00, 16, 8);
2032 /* reg_paos_admin_status
2033 * Port administrative state (the desired state of the port):
2036 * 3 - Up once. This means that in case of link failure, the port won't go
2037 * into polling mode, but will wait to be re-enabled by software.
2038 * 4 - Disabled by system. Can only be set by hardware.
2041 MLXSW_ITEM32(reg, paos, admin_status, 0x00, 8, 4);
2043 /* reg_paos_oper_status
2044 * Port operational state (the current state):
2047 * 3 - Down by port failure. This means that the device will not let the
2048 * port up again until explicitly specified by software.
2051 MLXSW_ITEM32(reg, paos, oper_status, 0x00, 0, 4);
2054 * Admin state update enabled.
2057 MLXSW_ITEM32(reg, paos, ase, 0x04, 31, 1);
2060 * Event update enable. If this bit is set, event generation will be
2061 * updated based on the e field.
2064 MLXSW_ITEM32(reg, paos, ee, 0x04, 30, 1);
2067 * Event generation on operational state change:
2068 * 0 - Do not generate event.
2069 * 1 - Generate Event.
2070 * 2 - Generate Single Event.
2073 MLXSW_ITEM32(reg, paos, e, 0x04, 0, 2);
2075 static inline void mlxsw_reg_paos_pack(char *payload, u8 local_port,
2076 enum mlxsw_port_admin_status status)
2078 MLXSW_REG_ZERO(paos, payload);
2079 mlxsw_reg_paos_swid_set(payload, 0);
2080 mlxsw_reg_paos_local_port_set(payload, local_port);
2081 mlxsw_reg_paos_admin_status_set(payload, status);
2082 mlxsw_reg_paos_oper_status_set(payload, 0);
2083 mlxsw_reg_paos_ase_set(payload, 1);
2084 mlxsw_reg_paos_ee_set(payload, 1);
2085 mlxsw_reg_paos_e_set(payload, 1);
2088 /* PPCNT - Ports Performance Counters Register
2089 * -------------------------------------------
2090 * The PPCNT register retrieves per port performance counters.
2092 #define MLXSW_REG_PPCNT_ID 0x5008
2093 #define MLXSW_REG_PPCNT_LEN 0x100
2095 static const struct mlxsw_reg_info mlxsw_reg_ppcnt = {
2096 .id = MLXSW_REG_PPCNT_ID,
2097 .len = MLXSW_REG_PPCNT_LEN,
2101 * For HCA: must be always 0.
2102 * Switch partition ID to associate port with.
2103 * Switch partitions are numbered from 0 to 7 inclusively.
2104 * Switch partition 254 indicates stacking ports.
2105 * Switch partition 255 indicates all switch partitions.
2106 * Only valid on Set() operation with local_port=255.
2109 MLXSW_ITEM32(reg, ppcnt, swid, 0x00, 24, 8);
2111 /* reg_ppcnt_local_port
2112 * Local port number.
2113 * 255 indicates all ports on the device, and is only allowed
2114 * for Set() operation.
2117 MLXSW_ITEM32(reg, ppcnt, local_port, 0x00, 16, 8);
2120 * Port number access type:
2121 * 0 - Local port number
2122 * 1 - IB port number
2125 MLXSW_ITEM32(reg, ppcnt, pnat, 0x00, 14, 2);
2128 * Performance counter group.
2129 * Group 63 indicates all groups. Only valid on Set() operation with
2131 * 0x0: IEEE 802.3 Counters
2132 * 0x1: RFC 2863 Counters
2133 * 0x2: RFC 2819 Counters
2134 * 0x3: RFC 3635 Counters
2135 * 0x5: Ethernet Extended Counters
2136 * 0x8: Link Level Retransmission Counters
2137 * 0x10: Per Priority Counters
2138 * 0x11: Per Traffic Class Counters
2139 * 0x12: Physical Layer Counters
2142 MLXSW_ITEM32(reg, ppcnt, grp, 0x00, 0, 6);
2145 * Clear counters. Setting the clr bit will reset the counter value
2146 * for all counters in the counter group. This bit can be set
2147 * for both Set() and Get() operation.
2150 MLXSW_ITEM32(reg, ppcnt, clr, 0x04, 31, 1);
2152 /* reg_ppcnt_prio_tc
2153 * Priority for counter set that support per priority, valid values: 0-7.
2154 * Traffic class for counter set that support per traffic class,
2155 * valid values: 0- cap_max_tclass-1 .
2156 * For HCA: cap_max_tclass is always 8.
2157 * Otherwise must be 0.
2160 MLXSW_ITEM32(reg, ppcnt, prio_tc, 0x04, 0, 5);
2162 /* reg_ppcnt_a_frames_transmitted_ok
2165 MLXSW_ITEM64(reg, ppcnt, a_frames_transmitted_ok,
2166 0x08 + 0x00, 0, 64);
2168 /* reg_ppcnt_a_frames_received_ok
2171 MLXSW_ITEM64(reg, ppcnt, a_frames_received_ok,
2172 0x08 + 0x08, 0, 64);
2174 /* reg_ppcnt_a_frame_check_sequence_errors
2177 MLXSW_ITEM64(reg, ppcnt, a_frame_check_sequence_errors,
2178 0x08 + 0x10, 0, 64);
2180 /* reg_ppcnt_a_alignment_errors
2183 MLXSW_ITEM64(reg, ppcnt, a_alignment_errors,
2184 0x08 + 0x18, 0, 64);
2186 /* reg_ppcnt_a_octets_transmitted_ok
2189 MLXSW_ITEM64(reg, ppcnt, a_octets_transmitted_ok,
2190 0x08 + 0x20, 0, 64);
2192 /* reg_ppcnt_a_octets_received_ok
2195 MLXSW_ITEM64(reg, ppcnt, a_octets_received_ok,
2196 0x08 + 0x28, 0, 64);
2198 /* reg_ppcnt_a_multicast_frames_xmitted_ok
2201 MLXSW_ITEM64(reg, ppcnt, a_multicast_frames_xmitted_ok,
2202 0x08 + 0x30, 0, 64);
2204 /* reg_ppcnt_a_broadcast_frames_xmitted_ok
2207 MLXSW_ITEM64(reg, ppcnt, a_broadcast_frames_xmitted_ok,
2208 0x08 + 0x38, 0, 64);
2210 /* reg_ppcnt_a_multicast_frames_received_ok
2213 MLXSW_ITEM64(reg, ppcnt, a_multicast_frames_received_ok,
2214 0x08 + 0x40, 0, 64);
2216 /* reg_ppcnt_a_broadcast_frames_received_ok
2219 MLXSW_ITEM64(reg, ppcnt, a_broadcast_frames_received_ok,
2220 0x08 + 0x48, 0, 64);
2222 /* reg_ppcnt_a_in_range_length_errors
2225 MLXSW_ITEM64(reg, ppcnt, a_in_range_length_errors,
2226 0x08 + 0x50, 0, 64);
2228 /* reg_ppcnt_a_out_of_range_length_field
2231 MLXSW_ITEM64(reg, ppcnt, a_out_of_range_length_field,
2232 0x08 + 0x58, 0, 64);
2234 /* reg_ppcnt_a_frame_too_long_errors
2237 MLXSW_ITEM64(reg, ppcnt, a_frame_too_long_errors,
2238 0x08 + 0x60, 0, 64);
2240 /* reg_ppcnt_a_symbol_error_during_carrier
2243 MLXSW_ITEM64(reg, ppcnt, a_symbol_error_during_carrier,
2244 0x08 + 0x68, 0, 64);
2246 /* reg_ppcnt_a_mac_control_frames_transmitted
2249 MLXSW_ITEM64(reg, ppcnt, a_mac_control_frames_transmitted,
2250 0x08 + 0x70, 0, 64);
2252 /* reg_ppcnt_a_mac_control_frames_received
2255 MLXSW_ITEM64(reg, ppcnt, a_mac_control_frames_received,
2256 0x08 + 0x78, 0, 64);
2258 /* reg_ppcnt_a_unsupported_opcodes_received
2261 MLXSW_ITEM64(reg, ppcnt, a_unsupported_opcodes_received,
2262 0x08 + 0x80, 0, 64);
2264 /* reg_ppcnt_a_pause_mac_ctrl_frames_received
2267 MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_received,
2268 0x08 + 0x88, 0, 64);
2270 /* reg_ppcnt_a_pause_mac_ctrl_frames_transmitted
2273 MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_transmitted,
2274 0x08 + 0x90, 0, 64);
2276 static inline void mlxsw_reg_ppcnt_pack(char *payload, u8 local_port)
2278 MLXSW_REG_ZERO(ppcnt, payload);
2279 mlxsw_reg_ppcnt_swid_set(payload, 0);
2280 mlxsw_reg_ppcnt_local_port_set(payload, local_port);
2281 mlxsw_reg_ppcnt_pnat_set(payload, 0);
2282 mlxsw_reg_ppcnt_grp_set(payload, 0);
2283 mlxsw_reg_ppcnt_clr_set(payload, 0);
2284 mlxsw_reg_ppcnt_prio_tc_set(payload, 0);
2287 /* PBMC - Port Buffer Management Control Register
2288 * ----------------------------------------------
2289 * The PBMC register configures and retrieves the port packet buffer
2290 * allocation for different Prios, and the Pause threshold management.
2292 #define MLXSW_REG_PBMC_ID 0x500C
2293 #define MLXSW_REG_PBMC_LEN 0x68
2295 static const struct mlxsw_reg_info mlxsw_reg_pbmc = {
2296 .id = MLXSW_REG_PBMC_ID,
2297 .len = MLXSW_REG_PBMC_LEN,
2300 /* reg_pbmc_local_port
2301 * Local port number.
2304 MLXSW_ITEM32(reg, pbmc, local_port, 0x00, 16, 8);
2306 /* reg_pbmc_xoff_timer_value
2307 * When device generates a pause frame, it uses this value as the pause
2308 * timer (time for the peer port to pause in quota-512 bit time).
2311 MLXSW_ITEM32(reg, pbmc, xoff_timer_value, 0x04, 16, 16);
2313 /* reg_pbmc_xoff_refresh
2314 * The time before a new pause frame should be sent to refresh the pause RW
2315 * state. Using the same units as xoff_timer_value above (in quota-512 bit
2319 MLXSW_ITEM32(reg, pbmc, xoff_refresh, 0x04, 0, 16);
2321 /* reg_pbmc_buf_lossy
2322 * The field indicates if the buffer is lossy.
2327 MLXSW_ITEM32_INDEXED(reg, pbmc, buf_lossy, 0x0C, 25, 1, 0x08, 0x00, false);
2329 /* reg_pbmc_buf_epsb
2330 * Eligible for Port Shared buffer.
2331 * If epsb is set, packets assigned to buffer are allowed to insert the port
2333 * When buf_lossy is MLXSW_REG_PBMC_LOSSY_LOSSY this field is reserved.
2336 MLXSW_ITEM32_INDEXED(reg, pbmc, buf_epsb, 0x0C, 24, 1, 0x08, 0x00, false);
2338 /* reg_pbmc_buf_size
2339 * The part of the packet buffer array is allocated for the specific buffer.
2340 * Units are represented in cells.
2343 MLXSW_ITEM32_INDEXED(reg, pbmc, buf_size, 0x0C, 0, 16, 0x08, 0x00, false);
2345 static inline void mlxsw_reg_pbmc_pack(char *payload, u8 local_port,
2346 u16 xoff_timer_value, u16 xoff_refresh)
2348 MLXSW_REG_ZERO(pbmc, payload);
2349 mlxsw_reg_pbmc_local_port_set(payload, local_port);
2350 mlxsw_reg_pbmc_xoff_timer_value_set(payload, xoff_timer_value);
2351 mlxsw_reg_pbmc_xoff_refresh_set(payload, xoff_refresh);
2354 static inline void mlxsw_reg_pbmc_lossy_buffer_pack(char *payload,
2358 mlxsw_reg_pbmc_buf_lossy_set(payload, buf_index, 1);
2359 mlxsw_reg_pbmc_buf_epsb_set(payload, buf_index, 0);
2360 mlxsw_reg_pbmc_buf_size_set(payload, buf_index, size);
2363 /* PSPA - Port Switch Partition Allocation
2364 * ---------------------------------------
2365 * Controls the association of a port with a switch partition and enables
2366 * configuring ports as stacking ports.
2368 #define MLXSW_REG_PSPA_ID 0x500D
2369 #define MLXSW_REG_PSPA_LEN 0x8
2371 static const struct mlxsw_reg_info mlxsw_reg_pspa = {
2372 .id = MLXSW_REG_PSPA_ID,
2373 .len = MLXSW_REG_PSPA_LEN,
2377 * Switch partition ID.
2380 MLXSW_ITEM32(reg, pspa, swid, 0x00, 24, 8);
2382 /* reg_pspa_local_port
2383 * Local port number.
2386 MLXSW_ITEM32(reg, pspa, local_port, 0x00, 16, 8);
2388 /* reg_pspa_sub_port
2389 * Virtual port within the local port. Set to 0 when virtual ports are
2390 * disabled on the local port.
2393 MLXSW_ITEM32(reg, pspa, sub_port, 0x00, 8, 8);
2395 static inline void mlxsw_reg_pspa_pack(char *payload, u8 swid, u8 local_port)
2397 MLXSW_REG_ZERO(pspa, payload);
2398 mlxsw_reg_pspa_swid_set(payload, swid);
2399 mlxsw_reg_pspa_local_port_set(payload, local_port);
2400 mlxsw_reg_pspa_sub_port_set(payload, 0);
2403 /* HTGT - Host Trap Group Table
2404 * ----------------------------
2405 * Configures the properties for forwarding to CPU.
2407 #define MLXSW_REG_HTGT_ID 0x7002
2408 #define MLXSW_REG_HTGT_LEN 0x100
2410 static const struct mlxsw_reg_info mlxsw_reg_htgt = {
2411 .id = MLXSW_REG_HTGT_ID,
2412 .len = MLXSW_REG_HTGT_LEN,
2416 * Switch partition ID.
2419 MLXSW_ITEM32(reg, htgt, swid, 0x00, 24, 8);
2421 #define MLXSW_REG_HTGT_PATH_TYPE_LOCAL 0x0 /* For locally attached CPU */
2427 MLXSW_ITEM32(reg, htgt, type, 0x00, 8, 4);
2429 enum mlxsw_reg_htgt_trap_group {
2430 MLXSW_REG_HTGT_TRAP_GROUP_EMAD,
2431 MLXSW_REG_HTGT_TRAP_GROUP_RX,
2432 MLXSW_REG_HTGT_TRAP_GROUP_CTRL,
2435 /* reg_htgt_trap_group
2436 * Trap group number. User defined number specifying which trap groups
2437 * should be forwarded to the CPU. The mapping between trap IDs and trap
2438 * groups is configured using HPKT register.
2441 MLXSW_ITEM32(reg, htgt, trap_group, 0x00, 0, 8);
2444 MLXSW_REG_HTGT_POLICER_DISABLE,
2445 MLXSW_REG_HTGT_POLICER_ENABLE,
2449 * Enable policer ID specified using 'pid' field.
2452 MLXSW_ITEM32(reg, htgt, pide, 0x04, 15, 1);
2455 * Policer ID for the trap group.
2458 MLXSW_ITEM32(reg, htgt, pid, 0x04, 0, 8);
2460 #define MLXSW_REG_HTGT_TRAP_TO_CPU 0x0
2462 /* reg_htgt_mirror_action
2463 * Mirror action to use.
2465 * 1 - Trap to CPU and mirror to a mirroring agent.
2466 * 2 - Mirror to a mirroring agent and do not trap to CPU.
2469 * Note: Mirroring to a mirroring agent is only supported in Spectrum.
2471 MLXSW_ITEM32(reg, htgt, mirror_action, 0x08, 8, 2);
2473 /* reg_htgt_mirroring_agent
2477 MLXSW_ITEM32(reg, htgt, mirroring_agent, 0x08, 0, 3);
2479 /* reg_htgt_priority
2480 * Trap group priority.
2481 * In case a packet matches multiple classification rules, the packet will
2482 * only be trapped once, based on the trap ID associated with the group (via
2483 * register HPKT) with the highest priority.
2484 * Supported values are 0-7, with 7 represnting the highest priority.
2487 * Note: In SwitchX-2 this field is ignored and the priority value is replaced
2488 * by the 'trap_group' field.
2490 MLXSW_ITEM32(reg, htgt, priority, 0x0C, 0, 4);
2492 /* reg_htgt_local_path_cpu_tclass
2493 * CPU ingress traffic class for the trap group.
2496 MLXSW_ITEM32(reg, htgt, local_path_cpu_tclass, 0x10, 16, 6);
2498 #define MLXSW_REG_HTGT_LOCAL_PATH_RDQ_EMAD 0x15
2499 #define MLXSW_REG_HTGT_LOCAL_PATH_RDQ_RX 0x14
2500 #define MLXSW_REG_HTGT_LOCAL_PATH_RDQ_CTRL 0x13
2502 /* reg_htgt_local_path_rdq
2503 * Receive descriptor queue (RDQ) to use for the trap group.
2506 MLXSW_ITEM32(reg, htgt, local_path_rdq, 0x10, 0, 6);
2508 static inline void mlxsw_reg_htgt_pack(char *payload,
2509 enum mlxsw_reg_htgt_trap_group group)
2513 MLXSW_REG_ZERO(htgt, payload);
2515 case MLXSW_REG_HTGT_TRAP_GROUP_EMAD:
2516 swid = MLXSW_PORT_SWID_ALL_SWIDS;
2517 rdq = MLXSW_REG_HTGT_LOCAL_PATH_RDQ_EMAD;
2519 case MLXSW_REG_HTGT_TRAP_GROUP_RX:
2521 rdq = MLXSW_REG_HTGT_LOCAL_PATH_RDQ_RX;
2523 case MLXSW_REG_HTGT_TRAP_GROUP_CTRL:
2525 rdq = MLXSW_REG_HTGT_LOCAL_PATH_RDQ_CTRL;
2528 mlxsw_reg_htgt_swid_set(payload, swid);
2529 mlxsw_reg_htgt_type_set(payload, MLXSW_REG_HTGT_PATH_TYPE_LOCAL);
2530 mlxsw_reg_htgt_trap_group_set(payload, group);
2531 mlxsw_reg_htgt_pide_set(payload, MLXSW_REG_HTGT_POLICER_DISABLE);
2532 mlxsw_reg_htgt_pid_set(payload, 0);
2533 mlxsw_reg_htgt_mirror_action_set(payload, MLXSW_REG_HTGT_TRAP_TO_CPU);
2534 mlxsw_reg_htgt_mirroring_agent_set(payload, 0);
2535 mlxsw_reg_htgt_priority_set(payload, 0);
2536 mlxsw_reg_htgt_local_path_cpu_tclass_set(payload, 7);
2537 mlxsw_reg_htgt_local_path_rdq_set(payload, rdq);
2540 /* HPKT - Host Packet Trap
2541 * -----------------------
2542 * Configures trap IDs inside trap groups.
2544 #define MLXSW_REG_HPKT_ID 0x7003
2545 #define MLXSW_REG_HPKT_LEN 0x10
2547 static const struct mlxsw_reg_info mlxsw_reg_hpkt = {
2548 .id = MLXSW_REG_HPKT_ID,
2549 .len = MLXSW_REG_HPKT_LEN,
2553 MLXSW_REG_HPKT_ACK_NOT_REQUIRED,
2554 MLXSW_REG_HPKT_ACK_REQUIRED,
2558 * Require acknowledgements from the host for events.
2559 * If set, then the device will wait for the event it sent to be acknowledged
2560 * by the host. This option is only relevant for event trap IDs.
2563 * Note: Currently not supported by firmware.
2565 MLXSW_ITEM32(reg, hpkt, ack, 0x00, 24, 1);
2567 enum mlxsw_reg_hpkt_action {
2568 MLXSW_REG_HPKT_ACTION_FORWARD,
2569 MLXSW_REG_HPKT_ACTION_TRAP_TO_CPU,
2570 MLXSW_REG_HPKT_ACTION_MIRROR_TO_CPU,
2571 MLXSW_REG_HPKT_ACTION_DISCARD,
2572 MLXSW_REG_HPKT_ACTION_SOFT_DISCARD,
2573 MLXSW_REG_HPKT_ACTION_TRAP_AND_SOFT_DISCARD,
2577 * Action to perform on packet when trapped.
2578 * 0 - No action. Forward to CPU based on switching rules.
2579 * 1 - Trap to CPU (CPU receives sole copy).
2580 * 2 - Mirror to CPU (CPU receives a replica of the packet).
2582 * 4 - Soft discard (allow other traps to act on the packet).
2583 * 5 - Trap and soft discard (allow other traps to overwrite this trap).
2586 * Note: Must be set to 0 (forward) for event trap IDs, as they are already
2587 * addressed to the CPU.
2589 MLXSW_ITEM32(reg, hpkt, action, 0x00, 20, 3);
2591 /* reg_hpkt_trap_group
2592 * Trap group to associate the trap with.
2595 MLXSW_ITEM32(reg, hpkt, trap_group, 0x00, 12, 6);
2601 * Note: A trap ID can only be associated with a single trap group. The device
2602 * will associate the trap ID with the last trap group configured.
2604 MLXSW_ITEM32(reg, hpkt, trap_id, 0x00, 0, 9);
2607 MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT,
2608 MLXSW_REG_HPKT_CTRL_PACKET_NO_BUFFER,
2609 MLXSW_REG_HPKT_CTRL_PACKET_USE_BUFFER,
2613 * Configure dedicated buffer resources for control packets.
2614 * 0 - Keep factory defaults.
2615 * 1 - Do not use control buffer for this trap ID.
2616 * 2 - Use control buffer for this trap ID.
2619 MLXSW_ITEM32(reg, hpkt, ctrl, 0x04, 16, 2);
2621 static inline void mlxsw_reg_hpkt_pack(char *payload, u8 action, u16 trap_id)
2623 enum mlxsw_reg_htgt_trap_group trap_group;
2625 MLXSW_REG_ZERO(hpkt, payload);
2626 mlxsw_reg_hpkt_ack_set(payload, MLXSW_REG_HPKT_ACK_NOT_REQUIRED);
2627 mlxsw_reg_hpkt_action_set(payload, action);
2629 case MLXSW_TRAP_ID_ETHEMAD:
2630 case MLXSW_TRAP_ID_PUDE:
2631 trap_group = MLXSW_REG_HTGT_TRAP_GROUP_EMAD;
2634 trap_group = MLXSW_REG_HTGT_TRAP_GROUP_RX;
2637 mlxsw_reg_hpkt_trap_group_set(payload, trap_group);
2638 mlxsw_reg_hpkt_trap_id_set(payload, trap_id);
2639 mlxsw_reg_hpkt_ctrl_set(payload, MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT);
2642 /* MFCR - Management Fan Control Register
2643 * --------------------------------------
2644 * This register controls the settings of the Fan Speed PWM mechanism.
2646 #define MLXSW_REG_MFCR_ID 0x9001
2647 #define MLXSW_REG_MFCR_LEN 0x08
2649 static const struct mlxsw_reg_info mlxsw_reg_mfcr = {
2650 .id = MLXSW_REG_MFCR_ID,
2651 .len = MLXSW_REG_MFCR_LEN,
2654 enum mlxsw_reg_mfcr_pwm_frequency {
2655 MLXSW_REG_MFCR_PWM_FEQ_11HZ = 0x00,
2656 MLXSW_REG_MFCR_PWM_FEQ_14_7HZ = 0x01,
2657 MLXSW_REG_MFCR_PWM_FEQ_22_1HZ = 0x02,
2658 MLXSW_REG_MFCR_PWM_FEQ_1_4KHZ = 0x40,
2659 MLXSW_REG_MFCR_PWM_FEQ_5KHZ = 0x41,
2660 MLXSW_REG_MFCR_PWM_FEQ_20KHZ = 0x42,
2661 MLXSW_REG_MFCR_PWM_FEQ_22_5KHZ = 0x43,
2662 MLXSW_REG_MFCR_PWM_FEQ_25KHZ = 0x44,
2665 /* reg_mfcr_pwm_frequency
2666 * Controls the frequency of the PWM signal.
2669 MLXSW_ITEM32(reg, mfcr, pwm_frequency, 0x00, 0, 6);
2671 #define MLXSW_MFCR_TACHOS_MAX 10
2673 /* reg_mfcr_tacho_active
2674 * Indicates which of the tachometer is active (bit per tachometer).
2677 MLXSW_ITEM32(reg, mfcr, tacho_active, 0x04, 16, MLXSW_MFCR_TACHOS_MAX);
2679 #define MLXSW_MFCR_PWMS_MAX 5
2681 /* reg_mfcr_pwm_active
2682 * Indicates which of the PWM control is active (bit per PWM).
2685 MLXSW_ITEM32(reg, mfcr, pwm_active, 0x04, 0, MLXSW_MFCR_PWMS_MAX);
2688 mlxsw_reg_mfcr_pack(char *payload,
2689 enum mlxsw_reg_mfcr_pwm_frequency pwm_frequency)
2691 MLXSW_REG_ZERO(mfcr, payload);
2692 mlxsw_reg_mfcr_pwm_frequency_set(payload, pwm_frequency);
2696 mlxsw_reg_mfcr_unpack(char *payload,
2697 enum mlxsw_reg_mfcr_pwm_frequency *p_pwm_frequency,
2698 u16 *p_tacho_active, u8 *p_pwm_active)
2700 *p_pwm_frequency = mlxsw_reg_mfcr_pwm_frequency_get(payload);
2701 *p_tacho_active = mlxsw_reg_mfcr_tacho_active_get(payload);
2702 *p_pwm_active = mlxsw_reg_mfcr_pwm_active_get(payload);
2705 /* MFSC - Management Fan Speed Control Register
2706 * --------------------------------------------
2707 * This register controls the settings of the Fan Speed PWM mechanism.
2709 #define MLXSW_REG_MFSC_ID 0x9002
2710 #define MLXSW_REG_MFSC_LEN 0x08
2712 static const struct mlxsw_reg_info mlxsw_reg_mfsc = {
2713 .id = MLXSW_REG_MFSC_ID,
2714 .len = MLXSW_REG_MFSC_LEN,
2718 * Fan pwm to control / monitor.
2721 MLXSW_ITEM32(reg, mfsc, pwm, 0x00, 24, 3);
2723 /* reg_mfsc_pwm_duty_cycle
2724 * Controls the duty cycle of the PWM. Value range from 0..255 to
2725 * represent duty cycle of 0%...100%.
2728 MLXSW_ITEM32(reg, mfsc, pwm_duty_cycle, 0x04, 0, 8);
2730 static inline void mlxsw_reg_mfsc_pack(char *payload, u8 pwm,
2733 MLXSW_REG_ZERO(mfsc, payload);
2734 mlxsw_reg_mfsc_pwm_set(payload, pwm);
2735 mlxsw_reg_mfsc_pwm_duty_cycle_set(payload, pwm_duty_cycle);
2738 /* MFSM - Management Fan Speed Measurement
2739 * ---------------------------------------
2740 * This register controls the settings of the Tacho measurements and
2741 * enables reading the Tachometer measurements.
2743 #define MLXSW_REG_MFSM_ID 0x9003
2744 #define MLXSW_REG_MFSM_LEN 0x08
2746 static const struct mlxsw_reg_info mlxsw_reg_mfsm = {
2747 .id = MLXSW_REG_MFSM_ID,
2748 .len = MLXSW_REG_MFSM_LEN,
2752 * Fan tachometer index.
2755 MLXSW_ITEM32(reg, mfsm, tacho, 0x00, 24, 4);
2758 * Fan speed (round per minute).
2761 MLXSW_ITEM32(reg, mfsm, rpm, 0x04, 0, 16);
2763 static inline void mlxsw_reg_mfsm_pack(char *payload, u8 tacho)
2765 MLXSW_REG_ZERO(mfsm, payload);
2766 mlxsw_reg_mfsm_tacho_set(payload, tacho);
2769 /* MTCAP - Management Temperature Capabilities
2770 * -------------------------------------------
2771 * This register exposes the capabilities of the device and
2772 * system temperature sensing.
2774 #define MLXSW_REG_MTCAP_ID 0x9009
2775 #define MLXSW_REG_MTCAP_LEN 0x08
2777 static const struct mlxsw_reg_info mlxsw_reg_mtcap = {
2778 .id = MLXSW_REG_MTCAP_ID,
2779 .len = MLXSW_REG_MTCAP_LEN,
2782 /* reg_mtcap_sensor_count
2783 * Number of sensors supported by the device.
2784 * This includes the QSFP module sensors (if exists in the QSFP module).
2787 MLXSW_ITEM32(reg, mtcap, sensor_count, 0x00, 0, 7);
2789 /* MTMP - Management Temperature
2790 * -----------------------------
2791 * This register controls the settings of the temperature measurements
2792 * and enables reading the temperature measurements. Note that temperature
2793 * is in 0.125 degrees Celsius.
2795 #define MLXSW_REG_MTMP_ID 0x900A
2796 #define MLXSW_REG_MTMP_LEN 0x20
2798 static const struct mlxsw_reg_info mlxsw_reg_mtmp = {
2799 .id = MLXSW_REG_MTMP_ID,
2800 .len = MLXSW_REG_MTMP_LEN,
2803 /* reg_mtmp_sensor_index
2804 * Sensors index to access.
2805 * 64-127 of sensor_index are mapped to the SFP+/QSFP modules sequentially
2806 * (module 0 is mapped to sensor_index 64).
2809 MLXSW_ITEM32(reg, mtmp, sensor_index, 0x00, 0, 7);
2811 /* Convert to milli degrees Celsius */
2812 #define MLXSW_REG_MTMP_TEMP_TO_MC(val) (val * 125)
2814 /* reg_mtmp_temperature
2815 * Temperature reading from the sensor. Reading is in 0.125 Celsius
2819 MLXSW_ITEM32(reg, mtmp, temperature, 0x04, 0, 16);
2822 * Max Temperature Enable - enables measuring the max temperature on a sensor.
2825 MLXSW_ITEM32(reg, mtmp, mte, 0x08, 31, 1);
2828 * Max Temperature Reset - clears the value of the max temperature register.
2831 MLXSW_ITEM32(reg, mtmp, mtr, 0x08, 30, 1);
2833 /* reg_mtmp_max_temperature
2834 * The highest measured temperature from the sensor.
2835 * When the bit mte is cleared, the field max_temperature is reserved.
2838 MLXSW_ITEM32(reg, mtmp, max_temperature, 0x08, 0, 16);
2840 #define MLXSW_REG_MTMP_SENSOR_NAME_SIZE 8
2842 /* reg_mtmp_sensor_name
2846 MLXSW_ITEM_BUF(reg, mtmp, sensor_name, 0x18, MLXSW_REG_MTMP_SENSOR_NAME_SIZE);
2848 static inline void mlxsw_reg_mtmp_pack(char *payload, u8 sensor_index,
2849 bool max_temp_enable,
2850 bool max_temp_reset)
2852 MLXSW_REG_ZERO(mtmp, payload);
2853 mlxsw_reg_mtmp_sensor_index_set(payload, sensor_index);
2854 mlxsw_reg_mtmp_mte_set(payload, max_temp_enable);
2855 mlxsw_reg_mtmp_mtr_set(payload, max_temp_reset);
2858 static inline void mlxsw_reg_mtmp_unpack(char *payload, unsigned int *p_temp,
2859 unsigned int *p_max_temp,
2865 temp = mlxsw_reg_mtmp_temperature_get(payload);
2866 *p_temp = MLXSW_REG_MTMP_TEMP_TO_MC(temp);
2869 temp = mlxsw_reg_mtmp_max_temperature_get(payload);
2870 *p_max_temp = MLXSW_REG_MTMP_TEMP_TO_MC(temp);
2873 mlxsw_reg_mtmp_sensor_name_memcpy_from(payload, sensor_name);
2876 /* MLCR - Management LED Control Register
2877 * --------------------------------------
2878 * Controls the system LEDs.
2880 #define MLXSW_REG_MLCR_ID 0x902B
2881 #define MLXSW_REG_MLCR_LEN 0x0C
2883 static const struct mlxsw_reg_info mlxsw_reg_mlcr = {
2884 .id = MLXSW_REG_MLCR_ID,
2885 .len = MLXSW_REG_MLCR_LEN,
2888 /* reg_mlcr_local_port
2889 * Local port number.
2892 MLXSW_ITEM32(reg, mlcr, local_port, 0x00, 16, 8);
2894 #define MLXSW_REG_MLCR_DURATION_MAX 0xFFFF
2896 /* reg_mlcr_beacon_duration
2897 * Duration of the beacon to be active, in seconds.
2898 * 0x0 - Will turn off the beacon.
2899 * 0xFFFF - Will turn on the beacon until explicitly turned off.
2902 MLXSW_ITEM32(reg, mlcr, beacon_duration, 0x04, 0, 16);
2904 /* reg_mlcr_beacon_remain
2905 * Remaining duration of the beacon, in seconds.
2906 * 0xFFFF indicates an infinite amount of time.
2909 MLXSW_ITEM32(reg, mlcr, beacon_remain, 0x08, 0, 16);
2911 static inline void mlxsw_reg_mlcr_pack(char *payload, u8 local_port,
2914 MLXSW_REG_ZERO(mlcr, payload);
2915 mlxsw_reg_mlcr_local_port_set(payload, local_port);
2916 mlxsw_reg_mlcr_beacon_duration_set(payload, active ?
2917 MLXSW_REG_MLCR_DURATION_MAX : 0);
2920 /* SBPR - Shared Buffer Pools Register
2921 * -----------------------------------
2922 * The SBPR configures and retrieves the shared buffer pools and configuration.
2924 #define MLXSW_REG_SBPR_ID 0xB001
2925 #define MLXSW_REG_SBPR_LEN 0x14
2927 static const struct mlxsw_reg_info mlxsw_reg_sbpr = {
2928 .id = MLXSW_REG_SBPR_ID,
2929 .len = MLXSW_REG_SBPR_LEN,
2932 enum mlxsw_reg_sbpr_dir {
2933 MLXSW_REG_SBPR_DIR_INGRESS,
2934 MLXSW_REG_SBPR_DIR_EGRESS,
2941 MLXSW_ITEM32(reg, sbpr, dir, 0x00, 24, 2);
2947 MLXSW_ITEM32(reg, sbpr, pool, 0x00, 0, 4);
2950 * Pool size in buffer cells.
2953 MLXSW_ITEM32(reg, sbpr, size, 0x04, 0, 24);
2955 enum mlxsw_reg_sbpr_mode {
2956 MLXSW_REG_SBPR_MODE_STATIC,
2957 MLXSW_REG_SBPR_MODE_DYNAMIC,
2961 * Pool quota calculation mode.
2964 MLXSW_ITEM32(reg, sbpr, mode, 0x08, 0, 4);
2966 static inline void mlxsw_reg_sbpr_pack(char *payload, u8 pool,
2967 enum mlxsw_reg_sbpr_dir dir,
2968 enum mlxsw_reg_sbpr_mode mode, u32 size)
2970 MLXSW_REG_ZERO(sbpr, payload);
2971 mlxsw_reg_sbpr_pool_set(payload, pool);
2972 mlxsw_reg_sbpr_dir_set(payload, dir);
2973 mlxsw_reg_sbpr_mode_set(payload, mode);
2974 mlxsw_reg_sbpr_size_set(payload, size);
2977 /* SBCM - Shared Buffer Class Management Register
2978 * ----------------------------------------------
2979 * The SBCM register configures and retrieves the shared buffer allocation
2980 * and configuration according to Port-PG, including the binding to pool
2981 * and definition of the associated quota.
2983 #define MLXSW_REG_SBCM_ID 0xB002
2984 #define MLXSW_REG_SBCM_LEN 0x28
2986 static const struct mlxsw_reg_info mlxsw_reg_sbcm = {
2987 .id = MLXSW_REG_SBCM_ID,
2988 .len = MLXSW_REG_SBCM_LEN,
2991 /* reg_sbcm_local_port
2992 * Local port number.
2993 * For Ingress: excludes CPU port and Router port
2994 * For Egress: excludes IP Router
2997 MLXSW_ITEM32(reg, sbcm, local_port, 0x00, 16, 8);
3000 * PG buffer - Port PG (dir=ingress) / traffic class (dir=egress)
3001 * For PG buffer: range is 0..cap_max_pg_buffers - 1
3002 * For traffic class: range is 0..cap_max_tclass - 1
3003 * Note that when traffic class is in MC aware mode then the traffic
3004 * classes which are MC aware cannot be configured.
3007 MLXSW_ITEM32(reg, sbcm, pg_buff, 0x00, 8, 6);
3009 enum mlxsw_reg_sbcm_dir {
3010 MLXSW_REG_SBCM_DIR_INGRESS,
3011 MLXSW_REG_SBCM_DIR_EGRESS,
3018 MLXSW_ITEM32(reg, sbcm, dir, 0x00, 0, 2);
3020 /* reg_sbcm_min_buff
3021 * Minimum buffer size for the limiter, in cells.
3024 MLXSW_ITEM32(reg, sbcm, min_buff, 0x18, 0, 24);
3026 /* reg_sbcm_max_buff
3027 * When the pool associated to the port-pg/tclass is configured to
3028 * static, Maximum buffer size for the limiter configured in cells.
3029 * When the pool associated to the port-pg/tclass is configured to
3030 * dynamic, the max_buff holds the "alpha" parameter, supporting
3031 * the following values:
3033 * i: (1/128)*2^(i-1), for i=1..14
3037 MLXSW_ITEM32(reg, sbcm, max_buff, 0x1C, 0, 24);
3040 * Association of the port-priority to a pool.
3043 MLXSW_ITEM32(reg, sbcm, pool, 0x24, 0, 4);
3045 static inline void mlxsw_reg_sbcm_pack(char *payload, u8 local_port, u8 pg_buff,
3046 enum mlxsw_reg_sbcm_dir dir,
3047 u32 min_buff, u32 max_buff, u8 pool)
3049 MLXSW_REG_ZERO(sbcm, payload);
3050 mlxsw_reg_sbcm_local_port_set(payload, local_port);
3051 mlxsw_reg_sbcm_pg_buff_set(payload, pg_buff);
3052 mlxsw_reg_sbcm_dir_set(payload, dir);
3053 mlxsw_reg_sbcm_min_buff_set(payload, min_buff);
3054 mlxsw_reg_sbcm_max_buff_set(payload, max_buff);
3055 mlxsw_reg_sbcm_pool_set(payload, pool);
3058 /* SBPM - Shared Buffer Class Management Register
3059 * ----------------------------------------------
3060 * The SBPM register configures and retrieves the shared buffer allocation
3061 * and configuration according to Port-Pool, including the definition
3062 * of the associated quota.
3064 #define MLXSW_REG_SBPM_ID 0xB003
3065 #define MLXSW_REG_SBPM_LEN 0x28
3067 static const struct mlxsw_reg_info mlxsw_reg_sbpm = {
3068 .id = MLXSW_REG_SBPM_ID,
3069 .len = MLXSW_REG_SBPM_LEN,
3072 /* reg_sbpm_local_port
3073 * Local port number.
3074 * For Ingress: excludes CPU port and Router port
3075 * For Egress: excludes IP Router
3078 MLXSW_ITEM32(reg, sbpm, local_port, 0x00, 16, 8);
3081 * The pool associated to quota counting on the local_port.
3084 MLXSW_ITEM32(reg, sbpm, pool, 0x00, 8, 4);
3086 enum mlxsw_reg_sbpm_dir {
3087 MLXSW_REG_SBPM_DIR_INGRESS,
3088 MLXSW_REG_SBPM_DIR_EGRESS,
3095 MLXSW_ITEM32(reg, sbpm, dir, 0x00, 0, 2);
3097 /* reg_sbpm_min_buff
3098 * Minimum buffer size for the limiter, in cells.
3101 MLXSW_ITEM32(reg, sbpm, min_buff, 0x18, 0, 24);
3103 /* reg_sbpm_max_buff
3104 * When the pool associated to the port-pg/tclass is configured to
3105 * static, Maximum buffer size for the limiter configured in cells.
3106 * When the pool associated to the port-pg/tclass is configured to
3107 * dynamic, the max_buff holds the "alpha" parameter, supporting
3108 * the following values:
3110 * i: (1/128)*2^(i-1), for i=1..14
3114 MLXSW_ITEM32(reg, sbpm, max_buff, 0x1C, 0, 24);
3116 static inline void mlxsw_reg_sbpm_pack(char *payload, u8 local_port, u8 pool,
3117 enum mlxsw_reg_sbpm_dir dir,
3118 u32 min_buff, u32 max_buff)
3120 MLXSW_REG_ZERO(sbpm, payload);
3121 mlxsw_reg_sbpm_local_port_set(payload, local_port);
3122 mlxsw_reg_sbpm_pool_set(payload, pool);
3123 mlxsw_reg_sbpm_dir_set(payload, dir);
3124 mlxsw_reg_sbpm_min_buff_set(payload, min_buff);
3125 mlxsw_reg_sbpm_max_buff_set(payload, max_buff);
3128 /* SBMM - Shared Buffer Multicast Management Register
3129 * --------------------------------------------------
3130 * The SBMM register configures and retrieves the shared buffer allocation
3131 * and configuration for MC packets according to Switch-Priority, including
3132 * the binding to pool and definition of the associated quota.
3134 #define MLXSW_REG_SBMM_ID 0xB004
3135 #define MLXSW_REG_SBMM_LEN 0x28
3137 static const struct mlxsw_reg_info mlxsw_reg_sbmm = {
3138 .id = MLXSW_REG_SBMM_ID,
3139 .len = MLXSW_REG_SBMM_LEN,
3146 MLXSW_ITEM32(reg, sbmm, prio, 0x00, 8, 4);
3148 /* reg_sbmm_min_buff
3149 * Minimum buffer size for the limiter, in cells.
3152 MLXSW_ITEM32(reg, sbmm, min_buff, 0x18, 0, 24);
3154 /* reg_sbmm_max_buff
3155 * When the pool associated to the port-pg/tclass is configured to
3156 * static, Maximum buffer size for the limiter configured in cells.
3157 * When the pool associated to the port-pg/tclass is configured to
3158 * dynamic, the max_buff holds the "alpha" parameter, supporting
3159 * the following values:
3161 * i: (1/128)*2^(i-1), for i=1..14
3165 MLXSW_ITEM32(reg, sbmm, max_buff, 0x1C, 0, 24);
3168 * Association of the port-priority to a pool.
3171 MLXSW_ITEM32(reg, sbmm, pool, 0x24, 0, 4);
3173 static inline void mlxsw_reg_sbmm_pack(char *payload, u8 prio, u32 min_buff,
3174 u32 max_buff, u8 pool)
3176 MLXSW_REG_ZERO(sbmm, payload);
3177 mlxsw_reg_sbmm_prio_set(payload, prio);
3178 mlxsw_reg_sbmm_min_buff_set(payload, min_buff);
3179 mlxsw_reg_sbmm_max_buff_set(payload, max_buff);
3180 mlxsw_reg_sbmm_pool_set(payload, pool);
3183 static inline const char *mlxsw_reg_id_str(u16 reg_id)
3186 case MLXSW_REG_SGCR_ID:
3188 case MLXSW_REG_SPAD_ID:
3190 case MLXSW_REG_SMID_ID:
3192 case MLXSW_REG_SSPR_ID:
3194 case MLXSW_REG_SFDAT_ID:
3196 case MLXSW_REG_SFD_ID:
3198 case MLXSW_REG_SFN_ID:
3200 case MLXSW_REG_SPMS_ID:
3202 case MLXSW_REG_SPVID_ID:
3204 case MLXSW_REG_SPVM_ID:
3206 case MLXSW_REG_SFGC_ID:
3208 case MLXSW_REG_SFTR_ID:
3210 case MLXSW_REG_SFDF_ID:
3212 case MLXSW_REG_SLDR_ID:
3214 case MLXSW_REG_SLCR_ID:
3216 case MLXSW_REG_SLCOR_ID:
3218 case MLXSW_REG_SPMLR_ID:
3220 case MLXSW_REG_SVFA_ID:
3222 case MLXSW_REG_SVPE_ID:
3224 case MLXSW_REG_SFMR_ID:
3226 case MLXSW_REG_SPVMLR_ID:
3228 case MLXSW_REG_PMLP_ID:
3230 case MLXSW_REG_PMTU_ID:
3232 case MLXSW_REG_PTYS_ID:
3234 case MLXSW_REG_PPAD_ID:
3236 case MLXSW_REG_PAOS_ID:
3238 case MLXSW_REG_PPCNT_ID:
3240 case MLXSW_REG_PBMC_ID:
3242 case MLXSW_REG_PSPA_ID:
3244 case MLXSW_REG_HTGT_ID:
3246 case MLXSW_REG_HPKT_ID:
3248 case MLXSW_REG_MFCR_ID:
3250 case MLXSW_REG_MFSC_ID:
3252 case MLXSW_REG_MFSM_ID:
3254 case MLXSW_REG_MTCAP_ID:
3256 case MLXSW_REG_MTMP_ID:
3258 case MLXSW_REG_MLCR_ID:
3260 case MLXSW_REG_SBPR_ID:
3262 case MLXSW_REG_SBCM_ID:
3264 case MLXSW_REG_SBPM_ID:
3266 case MLXSW_REG_SBMM_ID:
3273 /* PUDE - Port Up / Down Event
3274 * ---------------------------
3275 * Reports the operational state change of a port.
3277 #define MLXSW_REG_PUDE_LEN 0x10
3280 * Switch partition ID with which to associate the port.
3283 MLXSW_ITEM32(reg, pude, swid, 0x00, 24, 8);
3285 /* reg_pude_local_port
3286 * Local port number.
3289 MLXSW_ITEM32(reg, pude, local_port, 0x00, 16, 8);
3291 /* reg_pude_admin_status
3292 * Port administrative state (the desired state).
3295 * 3 - Up once. This means that in case of link failure, the port won't go
3296 * into polling mode, but will wait to be re-enabled by software.
3297 * 4 - Disabled by system. Can only be set by hardware.
3300 MLXSW_ITEM32(reg, pude, admin_status, 0x00, 8, 4);
3302 /* reg_pude_oper_status
3303 * Port operatioanl state.
3306 * 3 - Down by port failure. This means that the device will not let the
3307 * port up again until explicitly specified by software.
3310 MLXSW_ITEM32(reg, pude, oper_status, 0x00, 0, 4);