1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 2013 - 2018 Intel Corporation. */
4 /* ethtool support for i40e */
6 #include "i40e_devids.h"
8 #include "i40e_txrx_common.h"
9 #include "i40e_virtchnl_pf.h"
11 /* ethtool statistics helpers */
14 * struct i40e_stats - definition for an ethtool statistic
15 * @stat_string: statistic name to display in ethtool -S output
16 * @sizeof_stat: the sizeof() the stat, must be no greater than sizeof(u64)
17 * @stat_offset: offsetof() the stat from a base pointer
19 * This structure defines a statistic to be added to the ethtool stats buffer.
20 * It defines a statistic as offset from a common base pointer. Stats should
21 * be defined in constant arrays using the I40E_STAT macro, with every element
22 * of the array using the same _type for calculating the sizeof_stat and
25 * The @sizeof_stat is expected to be sizeof(u8), sizeof(u16), sizeof(u32) or
26 * sizeof(u64). Other sizes are not expected and will produce a WARN_ONCE from
27 * the i40e_add_ethtool_stat() helper function.
29 * The @stat_string is interpreted as a format string, allowing formatted
30 * values to be inserted while looping over multiple structures for a given
31 * statistics array. Thus, every statistic string in an array should have the
32 * same type and number of format specifiers, to be formatted by variadic
33 * arguments to the i40e_add_stat_string() helper function.
36 char stat_string[ETH_GSTRING_LEN];
41 /* Helper macro to define an i40e_stat structure with proper size and type.
42 * Use this when defining constant statistics arrays. Note that @_type expects
43 * only a type name and is used multiple times.
45 #define I40E_STAT(_type, _name, _stat) { \
46 .stat_string = _name, \
47 .sizeof_stat = sizeof_field(_type, _stat), \
48 .stat_offset = offsetof(_type, _stat) \
51 /* Helper macro for defining some statistics directly copied from the netdev
54 #define I40E_NETDEV_STAT(_net_stat) \
55 I40E_STAT(struct rtnl_link_stats64, #_net_stat, _net_stat)
57 /* Helper macro for defining some statistics related to queues */
58 #define I40E_QUEUE_STAT(_name, _stat) \
59 I40E_STAT(struct i40e_ring, _name, _stat)
61 /* Stats associated with a Tx or Rx ring */
62 static const struct i40e_stats i40e_gstrings_queue_stats[] = {
63 I40E_QUEUE_STAT("%s-%u.packets", stats.packets),
64 I40E_QUEUE_STAT("%s-%u.bytes", stats.bytes),
68 * i40e_add_one_ethtool_stat - copy the stat into the supplied buffer
69 * @data: location to store the stat value
70 * @pointer: basis for where to copy from
71 * @stat: the stat definition
73 * Copies the stat data defined by the pointer and stat structure pair into
74 * the memory supplied as data. Used to implement i40e_add_ethtool_stats and
75 * i40e_add_queue_stats. If the pointer is null, data will be zero'd.
78 i40e_add_one_ethtool_stat(u64 *data, void *pointer,
79 const struct i40e_stats *stat)
84 /* ensure that the ethtool data buffer is zero'd for any stats
85 * which don't have a valid pointer.
91 p = (char *)pointer + stat->stat_offset;
92 switch (stat->sizeof_stat) {
106 WARN_ONCE(1, "unexpected stat size for %s",
113 * __i40e_add_ethtool_stats - copy stats into the ethtool supplied buffer
114 * @data: ethtool stats buffer
115 * @pointer: location to copy stats from
116 * @stats: array of stats to copy
117 * @size: the size of the stats definition
119 * Copy the stats defined by the stats array using the pointer as a base into
120 * the data buffer supplied by ethtool. Updates the data pointer to point to
121 * the next empty location for successive calls to __i40e_add_ethtool_stats.
122 * If pointer is null, set the data values to zero and update the pointer to
126 __i40e_add_ethtool_stats(u64 **data, void *pointer,
127 const struct i40e_stats stats[],
128 const unsigned int size)
132 for (i = 0; i < size; i++)
133 i40e_add_one_ethtool_stat((*data)++, pointer, &stats[i]);
137 * i40e_add_ethtool_stats - copy stats into ethtool supplied buffer
138 * @data: ethtool stats buffer
139 * @pointer: location where stats are stored
140 * @stats: static const array of stat definitions
142 * Macro to ease the use of __i40e_add_ethtool_stats by taking a static
143 * constant stats array and passing the ARRAY_SIZE(). This avoids typos by
144 * ensuring that we pass the size associated with the given stats array.
146 * The parameter @stats is evaluated twice, so parameters with side effects
149 #define i40e_add_ethtool_stats(data, pointer, stats) \
150 __i40e_add_ethtool_stats(data, pointer, stats, ARRAY_SIZE(stats))
153 * i40e_add_queue_stats - copy queue statistics into supplied buffer
154 * @data: ethtool stats buffer
155 * @ring: the ring to copy
157 * Queue statistics must be copied while protected by
158 * u64_stats_fetch_begin, so we can't directly use i40e_add_ethtool_stats.
159 * Assumes that queue stats are defined in i40e_gstrings_queue_stats. If the
160 * ring pointer is null, zero out the queue stat values and update the data
161 * pointer. Otherwise safely copy the stats from the ring into the supplied
162 * buffer and update the data pointer when finished.
164 * This function expects to be called while under rcu_read_lock().
167 i40e_add_queue_stats(u64 **data, struct i40e_ring *ring)
169 const unsigned int size = ARRAY_SIZE(i40e_gstrings_queue_stats);
170 const struct i40e_stats *stats = i40e_gstrings_queue_stats;
174 /* To avoid invalid statistics values, ensure that we keep retrying
175 * the copy until we get a consistent value according to
176 * u64_stats_fetch_retry. But first, make sure our ring is
177 * non-null before attempting to access its syncp.
180 start = !ring ? 0 : u64_stats_fetch_begin(&ring->syncp);
181 for (i = 0; i < size; i++) {
182 i40e_add_one_ethtool_stat(&(*data)[i], ring,
185 } while (ring && u64_stats_fetch_retry(&ring->syncp, start));
187 /* Once we successfully copy the stats in, update the data pointer */
192 * __i40e_add_stat_strings - copy stat strings into ethtool buffer
193 * @p: ethtool supplied buffer
194 * @stats: stat definitions array
195 * @size: size of the stats array
197 * Format and copy the strings described by stats into the buffer pointed at
200 static void __i40e_add_stat_strings(u8 **p, const struct i40e_stats stats[],
201 const unsigned int size, ...)
205 for (i = 0; i < size; i++) {
208 va_start(args, size);
209 vsnprintf(*p, ETH_GSTRING_LEN, stats[i].stat_string, args);
210 *p += ETH_GSTRING_LEN;
216 * i40e_add_stat_strings - copy stat strings into ethtool buffer
217 * @p: ethtool supplied buffer
218 * @stats: stat definitions array
220 * Format and copy the strings described by the const static stats value into
221 * the buffer pointed at by p.
223 * The parameter @stats is evaluated twice, so parameters with side effects
224 * should be avoided. Additionally, stats must be an array such that
225 * ARRAY_SIZE can be called on it.
227 #define i40e_add_stat_strings(p, stats, ...) \
228 __i40e_add_stat_strings(p, stats, ARRAY_SIZE(stats), ## __VA_ARGS__)
230 #define I40E_PF_STAT(_name, _stat) \
231 I40E_STAT(struct i40e_pf, _name, _stat)
232 #define I40E_VSI_STAT(_name, _stat) \
233 I40E_STAT(struct i40e_vsi, _name, _stat)
234 #define I40E_VEB_STAT(_name, _stat) \
235 I40E_STAT(struct i40e_veb, _name, _stat)
236 #define I40E_VEB_TC_STAT(_name, _stat) \
237 I40E_STAT(struct i40e_cp_veb_tc_stats, _name, _stat)
238 #define I40E_PFC_STAT(_name, _stat) \
239 I40E_STAT(struct i40e_pfc_stats, _name, _stat)
241 static const struct i40e_stats i40e_gstrings_net_stats[] = {
242 I40E_NETDEV_STAT(rx_packets),
243 I40E_NETDEV_STAT(tx_packets),
244 I40E_NETDEV_STAT(rx_bytes),
245 I40E_NETDEV_STAT(tx_bytes),
246 I40E_NETDEV_STAT(rx_errors),
247 I40E_NETDEV_STAT(tx_errors),
248 I40E_NETDEV_STAT(rx_dropped),
249 I40E_NETDEV_STAT(rx_missed_errors),
250 I40E_NETDEV_STAT(tx_dropped),
251 I40E_NETDEV_STAT(collisions),
252 I40E_NETDEV_STAT(rx_length_errors),
253 I40E_NETDEV_STAT(rx_crc_errors),
256 static const struct i40e_stats i40e_gstrings_veb_stats[] = {
257 I40E_VEB_STAT("veb.rx_bytes", stats.rx_bytes),
258 I40E_VEB_STAT("veb.tx_bytes", stats.tx_bytes),
259 I40E_VEB_STAT("veb.rx_unicast", stats.rx_unicast),
260 I40E_VEB_STAT("veb.tx_unicast", stats.tx_unicast),
261 I40E_VEB_STAT("veb.rx_multicast", stats.rx_multicast),
262 I40E_VEB_STAT("veb.tx_multicast", stats.tx_multicast),
263 I40E_VEB_STAT("veb.rx_broadcast", stats.rx_broadcast),
264 I40E_VEB_STAT("veb.tx_broadcast", stats.tx_broadcast),
265 I40E_VEB_STAT("veb.rx_discards", stats.rx_discards),
266 I40E_VEB_STAT("veb.tx_discards", stats.tx_discards),
267 I40E_VEB_STAT("veb.tx_errors", stats.tx_errors),
268 I40E_VEB_STAT("veb.rx_unknown_protocol", stats.rx_unknown_protocol),
271 struct i40e_cp_veb_tc_stats {
278 static const struct i40e_stats i40e_gstrings_veb_tc_stats[] = {
279 I40E_VEB_TC_STAT("veb.tc_%u_tx_packets", tc_tx_packets),
280 I40E_VEB_TC_STAT("veb.tc_%u_tx_bytes", tc_tx_bytes),
281 I40E_VEB_TC_STAT("veb.tc_%u_rx_packets", tc_rx_packets),
282 I40E_VEB_TC_STAT("veb.tc_%u_rx_bytes", tc_rx_bytes),
285 static const struct i40e_stats i40e_gstrings_misc_stats[] = {
286 I40E_VSI_STAT("rx_unicast", eth_stats.rx_unicast),
287 I40E_VSI_STAT("tx_unicast", eth_stats.tx_unicast),
288 I40E_VSI_STAT("rx_multicast", eth_stats.rx_multicast),
289 I40E_VSI_STAT("tx_multicast", eth_stats.tx_multicast),
290 I40E_VSI_STAT("rx_broadcast", eth_stats.rx_broadcast),
291 I40E_VSI_STAT("tx_broadcast", eth_stats.tx_broadcast),
292 I40E_VSI_STAT("rx_unknown_protocol", eth_stats.rx_unknown_protocol),
293 I40E_VSI_STAT("tx_linearize", tx_linearize),
294 I40E_VSI_STAT("tx_force_wb", tx_force_wb),
295 I40E_VSI_STAT("tx_busy", tx_busy),
296 I40E_VSI_STAT("tx_stopped", tx_stopped),
297 I40E_VSI_STAT("rx_alloc_fail", rx_buf_failed),
298 I40E_VSI_STAT("rx_pg_alloc_fail", rx_page_failed),
299 I40E_VSI_STAT("rx_cache_reuse", rx_page_reuse),
300 I40E_VSI_STAT("rx_cache_alloc", rx_page_alloc),
301 I40E_VSI_STAT("rx_cache_waive", rx_page_waive),
302 I40E_VSI_STAT("rx_cache_busy", rx_page_busy),
303 I40E_VSI_STAT("tx_restart", tx_restart),
306 /* These PF_STATs might look like duplicates of some NETDEV_STATs,
307 * but they are separate. This device supports Virtualization, and
308 * as such might have several netdevs supporting VMDq and FCoE going
309 * through a single port. The NETDEV_STATs are for individual netdevs
310 * seen at the top of the stack, and the PF_STATs are for the physical
311 * function at the bottom of the stack hosting those netdevs.
313 * The PF_STATs are appended to the netdev stats only when ethtool -S
314 * is queried on the base PF netdev, not on the VMDq or FCoE netdev.
316 static const struct i40e_stats i40e_gstrings_stats[] = {
317 I40E_PF_STAT("port.rx_bytes", stats.eth.rx_bytes),
318 I40E_PF_STAT("port.tx_bytes", stats.eth.tx_bytes),
319 I40E_PF_STAT("port.rx_unicast", stats.eth.rx_unicast),
320 I40E_PF_STAT("port.tx_unicast", stats.eth.tx_unicast),
321 I40E_PF_STAT("port.rx_multicast", stats.eth.rx_multicast),
322 I40E_PF_STAT("port.tx_multicast", stats.eth.tx_multicast),
323 I40E_PF_STAT("port.rx_broadcast", stats.eth.rx_broadcast),
324 I40E_PF_STAT("port.tx_broadcast", stats.eth.tx_broadcast),
325 I40E_PF_STAT("port.tx_errors", stats.eth.tx_errors),
326 I40E_PF_STAT("port.rx_discards", stats.eth.rx_discards),
327 I40E_PF_STAT("port.tx_dropped_link_down", stats.tx_dropped_link_down),
328 I40E_PF_STAT("port.rx_crc_errors", stats.crc_errors),
329 I40E_PF_STAT("port.illegal_bytes", stats.illegal_bytes),
330 I40E_PF_STAT("port.mac_local_faults", stats.mac_local_faults),
331 I40E_PF_STAT("port.mac_remote_faults", stats.mac_remote_faults),
332 I40E_PF_STAT("port.tx_timeout", tx_timeout_count),
333 I40E_PF_STAT("port.rx_csum_bad", hw_csum_rx_error),
334 I40E_PF_STAT("port.rx_length_errors", stats.rx_length_errors),
335 I40E_PF_STAT("port.link_xon_rx", stats.link_xon_rx),
336 I40E_PF_STAT("port.link_xoff_rx", stats.link_xoff_rx),
337 I40E_PF_STAT("port.link_xon_tx", stats.link_xon_tx),
338 I40E_PF_STAT("port.link_xoff_tx", stats.link_xoff_tx),
339 I40E_PF_STAT("port.rx_size_64", stats.rx_size_64),
340 I40E_PF_STAT("port.rx_size_127", stats.rx_size_127),
341 I40E_PF_STAT("port.rx_size_255", stats.rx_size_255),
342 I40E_PF_STAT("port.rx_size_511", stats.rx_size_511),
343 I40E_PF_STAT("port.rx_size_1023", stats.rx_size_1023),
344 I40E_PF_STAT("port.rx_size_1522", stats.rx_size_1522),
345 I40E_PF_STAT("port.rx_size_big", stats.rx_size_big),
346 I40E_PF_STAT("port.tx_size_64", stats.tx_size_64),
347 I40E_PF_STAT("port.tx_size_127", stats.tx_size_127),
348 I40E_PF_STAT("port.tx_size_255", stats.tx_size_255),
349 I40E_PF_STAT("port.tx_size_511", stats.tx_size_511),
350 I40E_PF_STAT("port.tx_size_1023", stats.tx_size_1023),
351 I40E_PF_STAT("port.tx_size_1522", stats.tx_size_1522),
352 I40E_PF_STAT("port.tx_size_big", stats.tx_size_big),
353 I40E_PF_STAT("port.rx_undersize", stats.rx_undersize),
354 I40E_PF_STAT("port.rx_fragments", stats.rx_fragments),
355 I40E_PF_STAT("port.rx_oversize", stats.rx_oversize),
356 I40E_PF_STAT("port.rx_jabber", stats.rx_jabber),
357 I40E_PF_STAT("port.VF_admin_queue_requests", vf_aq_requests),
358 I40E_PF_STAT("port.arq_overflows", arq_overflows),
359 I40E_PF_STAT("port.tx_hwtstamp_timeouts", tx_hwtstamp_timeouts),
360 I40E_PF_STAT("port.rx_hwtstamp_cleared", rx_hwtstamp_cleared),
361 I40E_PF_STAT("port.tx_hwtstamp_skipped", tx_hwtstamp_skipped),
362 I40E_PF_STAT("port.fdir_flush_cnt", fd_flush_cnt),
363 I40E_PF_STAT("port.fdir_atr_match", stats.fd_atr_match),
364 I40E_PF_STAT("port.fdir_atr_tunnel_match", stats.fd_atr_tunnel_match),
365 I40E_PF_STAT("port.fdir_atr_status", stats.fd_atr_status),
366 I40E_PF_STAT("port.fdir_sb_match", stats.fd_sb_match),
367 I40E_PF_STAT("port.fdir_sb_status", stats.fd_sb_status),
370 I40E_PF_STAT("port.tx_lpi_status", stats.tx_lpi_status),
371 I40E_PF_STAT("port.rx_lpi_status", stats.rx_lpi_status),
372 I40E_PF_STAT("port.tx_lpi_count", stats.tx_lpi_count),
373 I40E_PF_STAT("port.rx_lpi_count", stats.rx_lpi_count),
376 struct i40e_pfc_stats {
378 u64 priority_xoff_rx;
380 u64 priority_xoff_tx;
381 u64 priority_xon_2_xoff;
384 static const struct i40e_stats i40e_gstrings_pfc_stats[] = {
385 I40E_PFC_STAT("port.tx_priority_%u_xon_tx", priority_xon_tx),
386 I40E_PFC_STAT("port.tx_priority_%u_xoff_tx", priority_xoff_tx),
387 I40E_PFC_STAT("port.rx_priority_%u_xon_rx", priority_xon_rx),
388 I40E_PFC_STAT("port.rx_priority_%u_xoff_rx", priority_xoff_rx),
389 I40E_PFC_STAT("port.rx_priority_%u_xon_2_xoff", priority_xon_2_xoff),
392 #define I40E_NETDEV_STATS_LEN ARRAY_SIZE(i40e_gstrings_net_stats)
394 #define I40E_MISC_STATS_LEN ARRAY_SIZE(i40e_gstrings_misc_stats)
396 #define I40E_VSI_STATS_LEN (I40E_NETDEV_STATS_LEN + I40E_MISC_STATS_LEN)
398 #define I40E_PFC_STATS_LEN (ARRAY_SIZE(i40e_gstrings_pfc_stats) * \
399 I40E_MAX_USER_PRIORITY)
401 #define I40E_VEB_STATS_LEN (ARRAY_SIZE(i40e_gstrings_veb_stats) + \
402 (ARRAY_SIZE(i40e_gstrings_veb_tc_stats) * \
403 I40E_MAX_TRAFFIC_CLASS))
405 #define I40E_GLOBAL_STATS_LEN ARRAY_SIZE(i40e_gstrings_stats)
407 #define I40E_PF_STATS_LEN (I40E_GLOBAL_STATS_LEN + \
408 I40E_PFC_STATS_LEN + \
409 I40E_VEB_STATS_LEN + \
412 /* Length of stats for a single queue */
413 #define I40E_QUEUE_STATS_LEN ARRAY_SIZE(i40e_gstrings_queue_stats)
415 enum i40e_ethtool_test_id {
416 I40E_ETH_TEST_REG = 0,
417 I40E_ETH_TEST_EEPROM,
422 static const char i40e_gstrings_test[][ETH_GSTRING_LEN] = {
423 "Register test (offline)",
424 "Eeprom test (offline)",
425 "Interrupt test (offline)",
426 "Link test (on/offline)"
429 #define I40E_TEST_LEN (sizeof(i40e_gstrings_test) / ETH_GSTRING_LEN)
431 struct i40e_priv_flags {
432 char flag_string[ETH_GSTRING_LEN];
437 #define I40E_PRIV_FLAG(_name, _bitno, _read_only) { \
438 .flag_string = _name, \
440 .read_only = _read_only, \
443 static const struct i40e_priv_flags i40e_gstrings_priv_flags[] = {
444 /* NOTE: MFP setting cannot be changed */
445 I40E_PRIV_FLAG("MFP", I40E_FLAG_MFP_ENA, 1),
446 I40E_PRIV_FLAG("total-port-shutdown",
447 I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENA, 1),
448 I40E_PRIV_FLAG("LinkPolling", I40E_FLAG_LINK_POLLING_ENA, 0),
449 I40E_PRIV_FLAG("flow-director-atr", I40E_FLAG_FD_ATR_ENA, 0),
450 I40E_PRIV_FLAG("veb-stats", I40E_FLAG_VEB_STATS_ENA, 0),
451 I40E_PRIV_FLAG("hw-atr-eviction", I40E_FLAG_HW_ATR_EVICT_ENA, 0),
452 I40E_PRIV_FLAG("link-down-on-close",
453 I40E_FLAG_LINK_DOWN_ON_CLOSE_ENA, 0),
454 I40E_PRIV_FLAG("legacy-rx", I40E_FLAG_LEGACY_RX_ENA, 0),
455 I40E_PRIV_FLAG("disable-source-pruning",
456 I40E_FLAG_SOURCE_PRUNING_DIS, 0),
457 I40E_PRIV_FLAG("disable-fw-lldp", I40E_FLAG_FW_LLDP_DIS, 0),
458 I40E_PRIV_FLAG("rs-fec", I40E_FLAG_RS_FEC, 0),
459 I40E_PRIV_FLAG("base-r-fec", I40E_FLAG_BASE_R_FEC, 0),
460 I40E_PRIV_FLAG("vf-vlan-pruning",
461 I40E_FLAG_VF_VLAN_PRUNING_ENA, 0),
464 #define I40E_PRIV_FLAGS_STR_LEN ARRAY_SIZE(i40e_gstrings_priv_flags)
466 /* Private flags with a global effect, restricted to PF 0 */
467 static const struct i40e_priv_flags i40e_gl_gstrings_priv_flags[] = {
468 I40E_PRIV_FLAG("vf-true-promisc-support",
469 I40E_FLAG_TRUE_PROMISC_ENA, 0),
472 #define I40E_GL_PRIV_FLAGS_STR_LEN ARRAY_SIZE(i40e_gl_gstrings_priv_flags)
475 * i40e_partition_setting_complaint - generic complaint for MFP restriction
478 static void i40e_partition_setting_complaint(struct i40e_pf *pf)
480 dev_info(&pf->pdev->dev,
481 "The link settings are allowed to be changed only from the first partition of a given port. Please switch to the first partition in order to change the setting.\n");
485 * i40e_phy_type_to_ethtool - convert the phy_types to ethtool link modes
486 * @pf: PF struct with phy_types
487 * @ks: ethtool link ksettings struct to fill out
490 static void i40e_phy_type_to_ethtool(struct i40e_pf *pf,
491 struct ethtool_link_ksettings *ks)
493 struct i40e_link_status *hw_link_info = &pf->hw.phy.link_info;
494 u64 phy_types = pf->hw.phy.phy_types;
496 ethtool_link_ksettings_zero_link_mode(ks, supported);
497 ethtool_link_ksettings_zero_link_mode(ks, advertising);
499 if (phy_types & I40E_CAP_PHY_TYPE_SGMII) {
500 ethtool_link_ksettings_add_link_mode(ks, supported,
502 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
503 ethtool_link_ksettings_add_link_mode(ks, advertising,
505 if (test_bit(I40E_HW_CAP_100M_SGMII, pf->hw.caps)) {
506 ethtool_link_ksettings_add_link_mode(ks, supported,
508 ethtool_link_ksettings_add_link_mode(ks, advertising,
512 if (phy_types & I40E_CAP_PHY_TYPE_XAUI ||
513 phy_types & I40E_CAP_PHY_TYPE_XFI ||
514 phy_types & I40E_CAP_PHY_TYPE_SFI ||
515 phy_types & I40E_CAP_PHY_TYPE_10GBASE_SFPP_CU ||
516 phy_types & I40E_CAP_PHY_TYPE_10GBASE_AOC) {
517 ethtool_link_ksettings_add_link_mode(ks, supported,
519 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
520 ethtool_link_ksettings_add_link_mode(ks, advertising,
523 if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_T) {
524 ethtool_link_ksettings_add_link_mode(ks, supported,
526 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
527 ethtool_link_ksettings_add_link_mode(ks, advertising,
530 if (phy_types & I40E_CAP_PHY_TYPE_2_5GBASE_T) {
531 ethtool_link_ksettings_add_link_mode(ks, supported,
533 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_2_5GB)
534 ethtool_link_ksettings_add_link_mode(ks, advertising,
537 if (phy_types & I40E_CAP_PHY_TYPE_5GBASE_T) {
538 ethtool_link_ksettings_add_link_mode(ks, supported,
540 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_5GB)
541 ethtool_link_ksettings_add_link_mode(ks, advertising,
544 if (phy_types & I40E_CAP_PHY_TYPE_XLAUI ||
545 phy_types & I40E_CAP_PHY_TYPE_XLPPI ||
546 phy_types & I40E_CAP_PHY_TYPE_40GBASE_AOC)
547 ethtool_link_ksettings_add_link_mode(ks, supported,
549 if (phy_types & I40E_CAP_PHY_TYPE_40GBASE_CR4_CU ||
550 phy_types & I40E_CAP_PHY_TYPE_40GBASE_CR4) {
551 ethtool_link_ksettings_add_link_mode(ks, supported,
553 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_40GB)
554 ethtool_link_ksettings_add_link_mode(ks, advertising,
557 if (phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) {
558 ethtool_link_ksettings_add_link_mode(ks, supported,
560 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
561 ethtool_link_ksettings_add_link_mode(ks, advertising,
564 if (phy_types & I40E_CAP_PHY_TYPE_1000BASE_T) {
565 ethtool_link_ksettings_add_link_mode(ks, supported,
567 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
568 ethtool_link_ksettings_add_link_mode(ks, advertising,
571 if (phy_types & I40E_CAP_PHY_TYPE_40GBASE_SR4) {
572 ethtool_link_ksettings_add_link_mode(ks, supported,
574 ethtool_link_ksettings_add_link_mode(ks, advertising,
577 if (phy_types & I40E_CAP_PHY_TYPE_40GBASE_LR4) {
578 ethtool_link_ksettings_add_link_mode(ks, supported,
580 ethtool_link_ksettings_add_link_mode(ks, advertising,
583 if (phy_types & I40E_CAP_PHY_TYPE_40GBASE_KR4) {
584 ethtool_link_ksettings_add_link_mode(ks, supported,
586 ethtool_link_ksettings_add_link_mode(ks, advertising,
589 if (phy_types & I40E_CAP_PHY_TYPE_20GBASE_KR2) {
590 ethtool_link_ksettings_add_link_mode(ks, supported,
592 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_20GB)
593 ethtool_link_ksettings_add_link_mode(ks, advertising,
596 if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_KX4) {
597 ethtool_link_ksettings_add_link_mode(ks, supported,
599 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
600 ethtool_link_ksettings_add_link_mode(ks, advertising,
603 if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_KR &&
604 !test_bit(I40E_HW_CAP_CRT_RETIMER, pf->hw.caps)) {
605 ethtool_link_ksettings_add_link_mode(ks, supported,
607 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
608 ethtool_link_ksettings_add_link_mode(ks, advertising,
611 if (phy_types & I40E_CAP_PHY_TYPE_1000BASE_KX &&
612 !test_bit(I40E_HW_CAP_CRT_RETIMER, pf->hw.caps)) {
613 ethtool_link_ksettings_add_link_mode(ks, supported,
615 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
616 ethtool_link_ksettings_add_link_mode(ks, advertising,
619 /* need to add 25G PHY types */
620 if (phy_types & I40E_CAP_PHY_TYPE_25GBASE_KR) {
621 ethtool_link_ksettings_add_link_mode(ks, supported,
623 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_25GB)
624 ethtool_link_ksettings_add_link_mode(ks, advertising,
627 if (phy_types & I40E_CAP_PHY_TYPE_25GBASE_CR) {
628 ethtool_link_ksettings_add_link_mode(ks, supported,
630 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_25GB)
631 ethtool_link_ksettings_add_link_mode(ks, advertising,
634 if (phy_types & I40E_CAP_PHY_TYPE_25GBASE_SR ||
635 phy_types & I40E_CAP_PHY_TYPE_25GBASE_LR) {
636 ethtool_link_ksettings_add_link_mode(ks, supported,
638 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_25GB)
639 ethtool_link_ksettings_add_link_mode(ks, advertising,
642 if (phy_types & I40E_CAP_PHY_TYPE_25GBASE_AOC ||
643 phy_types & I40E_CAP_PHY_TYPE_25GBASE_ACC) {
644 ethtool_link_ksettings_add_link_mode(ks, supported,
646 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_25GB)
647 ethtool_link_ksettings_add_link_mode(ks, advertising,
650 if (phy_types & I40E_CAP_PHY_TYPE_25GBASE_KR ||
651 phy_types & I40E_CAP_PHY_TYPE_25GBASE_CR ||
652 phy_types & I40E_CAP_PHY_TYPE_25GBASE_SR ||
653 phy_types & I40E_CAP_PHY_TYPE_25GBASE_LR ||
654 phy_types & I40E_CAP_PHY_TYPE_25GBASE_AOC ||
655 phy_types & I40E_CAP_PHY_TYPE_25GBASE_ACC) {
656 ethtool_link_ksettings_add_link_mode(ks, supported, FEC_NONE);
657 ethtool_link_ksettings_add_link_mode(ks, supported, FEC_RS);
658 ethtool_link_ksettings_add_link_mode(ks, supported, FEC_BASER);
659 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_25GB) {
660 ethtool_link_ksettings_add_link_mode(ks, advertising,
662 ethtool_link_ksettings_add_link_mode(ks, advertising,
664 ethtool_link_ksettings_add_link_mode(ks, advertising,
668 /* need to add new 10G PHY types */
669 if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_CR1 ||
670 phy_types & I40E_CAP_PHY_TYPE_10GBASE_CR1_CU) {
671 ethtool_link_ksettings_add_link_mode(ks, supported,
673 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
674 ethtool_link_ksettings_add_link_mode(ks, advertising,
677 if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_SR) {
678 ethtool_link_ksettings_add_link_mode(ks, supported,
680 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
681 ethtool_link_ksettings_add_link_mode(ks, advertising,
684 if (phy_types & I40E_CAP_PHY_TYPE_10GBASE_LR) {
685 ethtool_link_ksettings_add_link_mode(ks, supported,
687 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
688 ethtool_link_ksettings_add_link_mode(ks, advertising,
691 if (phy_types & I40E_CAP_PHY_TYPE_1000BASE_SX ||
692 phy_types & I40E_CAP_PHY_TYPE_1000BASE_LX ||
693 phy_types & I40E_CAP_PHY_TYPE_1000BASE_T_OPTICAL) {
694 ethtool_link_ksettings_add_link_mode(ks, supported,
696 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
697 ethtool_link_ksettings_add_link_mode(ks, advertising,
700 /* Autoneg PHY types */
701 if (phy_types & I40E_CAP_PHY_TYPE_SGMII ||
702 phy_types & I40E_CAP_PHY_TYPE_40GBASE_KR4 ||
703 phy_types & I40E_CAP_PHY_TYPE_40GBASE_CR4_CU ||
704 phy_types & I40E_CAP_PHY_TYPE_40GBASE_CR4 ||
705 phy_types & I40E_CAP_PHY_TYPE_25GBASE_SR ||
706 phy_types & I40E_CAP_PHY_TYPE_25GBASE_LR ||
707 phy_types & I40E_CAP_PHY_TYPE_25GBASE_KR ||
708 phy_types & I40E_CAP_PHY_TYPE_25GBASE_CR ||
709 phy_types & I40E_CAP_PHY_TYPE_20GBASE_KR2 ||
710 phy_types & I40E_CAP_PHY_TYPE_10GBASE_SR ||
711 phy_types & I40E_CAP_PHY_TYPE_10GBASE_LR ||
712 phy_types & I40E_CAP_PHY_TYPE_10GBASE_KX4 ||
713 phy_types & I40E_CAP_PHY_TYPE_10GBASE_KR ||
714 phy_types & I40E_CAP_PHY_TYPE_10GBASE_CR1_CU ||
715 phy_types & I40E_CAP_PHY_TYPE_10GBASE_CR1 ||
716 phy_types & I40E_CAP_PHY_TYPE_10GBASE_T ||
717 phy_types & I40E_CAP_PHY_TYPE_5GBASE_T ||
718 phy_types & I40E_CAP_PHY_TYPE_2_5GBASE_T ||
719 phy_types & I40E_CAP_PHY_TYPE_1000BASE_T_OPTICAL ||
720 phy_types & I40E_CAP_PHY_TYPE_1000BASE_T ||
721 phy_types & I40E_CAP_PHY_TYPE_1000BASE_SX ||
722 phy_types & I40E_CAP_PHY_TYPE_1000BASE_LX ||
723 phy_types & I40E_CAP_PHY_TYPE_1000BASE_KX ||
724 phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) {
725 ethtool_link_ksettings_add_link_mode(ks, supported,
727 ethtool_link_ksettings_add_link_mode(ks, advertising,
733 * i40e_get_settings_link_up_fec - Get the FEC mode encoding from mask
734 * @req_fec_info: mask request FEC info
735 * @ks: ethtool ksettings to fill in
737 static void i40e_get_settings_link_up_fec(u8 req_fec_info,
738 struct ethtool_link_ksettings *ks)
740 ethtool_link_ksettings_add_link_mode(ks, supported, FEC_NONE);
741 ethtool_link_ksettings_add_link_mode(ks, supported, FEC_RS);
742 ethtool_link_ksettings_add_link_mode(ks, supported, FEC_BASER);
744 if ((I40E_AQ_SET_FEC_REQUEST_RS & req_fec_info) &&
745 (I40E_AQ_SET_FEC_REQUEST_KR & req_fec_info)) {
746 ethtool_link_ksettings_add_link_mode(ks, advertising,
748 ethtool_link_ksettings_add_link_mode(ks, advertising,
750 ethtool_link_ksettings_add_link_mode(ks, advertising, FEC_RS);
751 } else if (I40E_AQ_SET_FEC_REQUEST_RS & req_fec_info) {
752 ethtool_link_ksettings_add_link_mode(ks, advertising, FEC_RS);
753 } else if (I40E_AQ_SET_FEC_REQUEST_KR & req_fec_info) {
754 ethtool_link_ksettings_add_link_mode(ks, advertising,
757 ethtool_link_ksettings_add_link_mode(ks, advertising,
763 * i40e_get_settings_link_up - Get the Link settings for when link is up
765 * @ks: ethtool ksettings to fill in
766 * @netdev: network interface device structure
767 * @pf: pointer to physical function struct
769 static void i40e_get_settings_link_up(struct i40e_hw *hw,
770 struct ethtool_link_ksettings *ks,
771 struct net_device *netdev,
774 struct i40e_link_status *hw_link_info = &hw->phy.link_info;
775 struct ethtool_link_ksettings cap_ksettings;
776 u32 link_speed = hw_link_info->link_speed;
778 /* Initialize supported and advertised settings based on phy settings */
779 switch (hw_link_info->phy_type) {
780 case I40E_PHY_TYPE_40GBASE_CR4:
781 case I40E_PHY_TYPE_40GBASE_CR4_CU:
782 ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
783 ethtool_link_ksettings_add_link_mode(ks, supported,
785 ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
786 ethtool_link_ksettings_add_link_mode(ks, advertising,
789 case I40E_PHY_TYPE_XLAUI:
790 case I40E_PHY_TYPE_XLPPI:
791 case I40E_PHY_TYPE_40GBASE_AOC:
792 ethtool_link_ksettings_add_link_mode(ks, supported,
794 ethtool_link_ksettings_add_link_mode(ks, advertising,
797 case I40E_PHY_TYPE_40GBASE_SR4:
798 ethtool_link_ksettings_add_link_mode(ks, supported,
800 ethtool_link_ksettings_add_link_mode(ks, advertising,
803 case I40E_PHY_TYPE_40GBASE_LR4:
804 ethtool_link_ksettings_add_link_mode(ks, supported,
806 ethtool_link_ksettings_add_link_mode(ks, advertising,
809 case I40E_PHY_TYPE_25GBASE_SR:
810 case I40E_PHY_TYPE_25GBASE_LR:
811 case I40E_PHY_TYPE_10GBASE_SR:
812 case I40E_PHY_TYPE_10GBASE_LR:
813 case I40E_PHY_TYPE_1000BASE_SX:
814 case I40E_PHY_TYPE_1000BASE_LX:
815 ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
816 ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
817 ethtool_link_ksettings_add_link_mode(ks, supported,
819 ethtool_link_ksettings_add_link_mode(ks, advertising,
821 i40e_get_settings_link_up_fec(hw_link_info->req_fec_info, ks);
822 ethtool_link_ksettings_add_link_mode(ks, supported,
824 ethtool_link_ksettings_add_link_mode(ks, advertising,
826 ethtool_link_ksettings_add_link_mode(ks, supported,
828 ethtool_link_ksettings_add_link_mode(ks, advertising,
830 ethtool_link_ksettings_add_link_mode(ks, supported,
832 ethtool_link_ksettings_add_link_mode(ks, advertising,
834 ethtool_link_ksettings_add_link_mode(ks, supported,
836 if (hw_link_info->module_type[2] &
837 I40E_MODULE_TYPE_1000BASE_SX ||
838 hw_link_info->module_type[2] &
839 I40E_MODULE_TYPE_1000BASE_LX) {
840 ethtool_link_ksettings_add_link_mode(ks, supported,
842 if (hw_link_info->requested_speeds &
844 ethtool_link_ksettings_add_link_mode(
845 ks, advertising, 1000baseT_Full);
847 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
848 ethtool_link_ksettings_add_link_mode(ks, advertising,
851 case I40E_PHY_TYPE_10GBASE_T:
852 case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS:
853 case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS:
854 case I40E_PHY_TYPE_1000BASE_T:
855 case I40E_PHY_TYPE_100BASE_TX:
856 ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
857 ethtool_link_ksettings_add_link_mode(ks, supported,
859 ethtool_link_ksettings_add_link_mode(ks, supported,
861 ethtool_link_ksettings_add_link_mode(ks, supported,
863 ethtool_link_ksettings_add_link_mode(ks, supported,
865 ethtool_link_ksettings_add_link_mode(ks, supported,
867 ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
868 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
869 ethtool_link_ksettings_add_link_mode(ks, advertising,
871 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_5GB)
872 ethtool_link_ksettings_add_link_mode(ks, advertising,
874 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_2_5GB)
875 ethtool_link_ksettings_add_link_mode(ks, advertising,
877 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
878 ethtool_link_ksettings_add_link_mode(ks, advertising,
880 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
881 ethtool_link_ksettings_add_link_mode(ks, advertising,
884 case I40E_PHY_TYPE_1000BASE_T_OPTICAL:
885 ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
886 ethtool_link_ksettings_add_link_mode(ks, supported,
888 ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
889 ethtool_link_ksettings_add_link_mode(ks, advertising,
892 case I40E_PHY_TYPE_10GBASE_CR1_CU:
893 case I40E_PHY_TYPE_10GBASE_CR1:
894 ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
895 ethtool_link_ksettings_add_link_mode(ks, supported,
897 ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
898 ethtool_link_ksettings_add_link_mode(ks, advertising,
901 case I40E_PHY_TYPE_XAUI:
902 case I40E_PHY_TYPE_XFI:
903 case I40E_PHY_TYPE_SFI:
904 case I40E_PHY_TYPE_10GBASE_SFPP_CU:
905 case I40E_PHY_TYPE_10GBASE_AOC:
906 ethtool_link_ksettings_add_link_mode(ks, supported,
908 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
909 ethtool_link_ksettings_add_link_mode(ks, advertising,
911 i40e_get_settings_link_up_fec(hw_link_info->req_fec_info, ks);
913 case I40E_PHY_TYPE_SGMII:
914 ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
915 ethtool_link_ksettings_add_link_mode(ks, supported,
917 if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
918 ethtool_link_ksettings_add_link_mode(ks, advertising,
920 if (test_bit(I40E_HW_CAP_100M_SGMII, pf->hw.caps)) {
921 ethtool_link_ksettings_add_link_mode(ks, supported,
923 if (hw_link_info->requested_speeds &
924 I40E_LINK_SPEED_100MB)
925 ethtool_link_ksettings_add_link_mode(
926 ks, advertising, 100baseT_Full);
929 case I40E_PHY_TYPE_40GBASE_KR4:
930 case I40E_PHY_TYPE_25GBASE_KR:
931 case I40E_PHY_TYPE_20GBASE_KR2:
932 case I40E_PHY_TYPE_10GBASE_KR:
933 case I40E_PHY_TYPE_10GBASE_KX4:
934 case I40E_PHY_TYPE_1000BASE_KX:
935 ethtool_link_ksettings_add_link_mode(ks, supported,
937 ethtool_link_ksettings_add_link_mode(ks, supported,
939 ethtool_link_ksettings_add_link_mode(ks, supported,
941 ethtool_link_ksettings_add_link_mode(ks, supported,
943 ethtool_link_ksettings_add_link_mode(ks, supported,
945 ethtool_link_ksettings_add_link_mode(ks, supported,
947 ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
948 ethtool_link_ksettings_add_link_mode(ks, advertising,
950 ethtool_link_ksettings_add_link_mode(ks, advertising,
952 i40e_get_settings_link_up_fec(hw_link_info->req_fec_info, ks);
953 ethtool_link_ksettings_add_link_mode(ks, advertising,
955 ethtool_link_ksettings_add_link_mode(ks, advertising,
957 ethtool_link_ksettings_add_link_mode(ks, advertising,
959 ethtool_link_ksettings_add_link_mode(ks, advertising,
961 ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
963 case I40E_PHY_TYPE_25GBASE_CR:
964 ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
965 ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
966 ethtool_link_ksettings_add_link_mode(ks, supported,
968 ethtool_link_ksettings_add_link_mode(ks, advertising,
970 i40e_get_settings_link_up_fec(hw_link_info->req_fec_info, ks);
973 case I40E_PHY_TYPE_25GBASE_AOC:
974 case I40E_PHY_TYPE_25GBASE_ACC:
975 ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
976 ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
977 ethtool_link_ksettings_add_link_mode(ks, supported,
979 ethtool_link_ksettings_add_link_mode(ks, advertising,
981 i40e_get_settings_link_up_fec(hw_link_info->req_fec_info, ks);
983 ethtool_link_ksettings_add_link_mode(ks, supported,
985 ethtool_link_ksettings_add_link_mode(ks, advertising,
989 /* if we got here and link is up something bad is afoot */
991 "WARNING: Link is up but PHY type 0x%x is not recognized, or incorrect cable is in use\n",
992 hw_link_info->phy_type);
995 /* Now that we've worked out everything that could be supported by the
996 * current PHY type, get what is supported by the NVM and intersect
997 * them to get what is truly supported
999 memset(&cap_ksettings, 0, sizeof(struct ethtool_link_ksettings));
1000 i40e_phy_type_to_ethtool(pf, &cap_ksettings);
1001 ethtool_intersect_link_masks(ks, &cap_ksettings);
1003 /* Set speed and duplex */
1004 switch (link_speed) {
1005 case I40E_LINK_SPEED_40GB:
1006 ks->base.speed = SPEED_40000;
1008 case I40E_LINK_SPEED_25GB:
1009 ks->base.speed = SPEED_25000;
1011 case I40E_LINK_SPEED_20GB:
1012 ks->base.speed = SPEED_20000;
1014 case I40E_LINK_SPEED_10GB:
1015 ks->base.speed = SPEED_10000;
1017 case I40E_LINK_SPEED_5GB:
1018 ks->base.speed = SPEED_5000;
1020 case I40E_LINK_SPEED_2_5GB:
1021 ks->base.speed = SPEED_2500;
1023 case I40E_LINK_SPEED_1GB:
1024 ks->base.speed = SPEED_1000;
1026 case I40E_LINK_SPEED_100MB:
1027 ks->base.speed = SPEED_100;
1030 ks->base.speed = SPEED_UNKNOWN;
1033 ks->base.duplex = DUPLEX_FULL;
1037 * i40e_get_settings_link_down - Get the Link settings for when link is down
1039 * @ks: ethtool ksettings to fill in
1040 * @pf: pointer to physical function struct
1042 * Reports link settings that can be determined when link is down
1044 static void i40e_get_settings_link_down(struct i40e_hw *hw,
1045 struct ethtool_link_ksettings *ks,
1048 /* link is down and the driver needs to fall back on
1049 * supported phy types to figure out what info to display
1051 i40e_phy_type_to_ethtool(pf, ks);
1053 /* With no link speed and duplex are unknown */
1054 ks->base.speed = SPEED_UNKNOWN;
1055 ks->base.duplex = DUPLEX_UNKNOWN;
1059 * i40e_get_link_ksettings - Get Link Speed and Duplex settings
1060 * @netdev: network interface device structure
1061 * @ks: ethtool ksettings
1063 * Reports speed/duplex settings based on media_type
1065 static int i40e_get_link_ksettings(struct net_device *netdev,
1066 struct ethtool_link_ksettings *ks)
1068 struct i40e_netdev_priv *np = netdev_priv(netdev);
1069 struct i40e_pf *pf = np->vsi->back;
1070 struct i40e_hw *hw = &pf->hw;
1071 struct i40e_link_status *hw_link_info = &hw->phy.link_info;
1072 bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
1074 ethtool_link_ksettings_zero_link_mode(ks, supported);
1075 ethtool_link_ksettings_zero_link_mode(ks, advertising);
1078 i40e_get_settings_link_up(hw, ks, netdev, pf);
1080 i40e_get_settings_link_down(hw, ks, pf);
1082 /* Now set the settings that don't rely on link being up/down */
1083 /* Set autoneg settings */
1084 ks->base.autoneg = ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
1085 AUTONEG_ENABLE : AUTONEG_DISABLE);
1087 /* Set media type settings */
1088 switch (hw->phy.media_type) {
1089 case I40E_MEDIA_TYPE_BACKPLANE:
1090 ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
1091 ethtool_link_ksettings_add_link_mode(ks, supported, Backplane);
1092 ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
1093 ethtool_link_ksettings_add_link_mode(ks, advertising,
1095 ks->base.port = PORT_NONE;
1097 case I40E_MEDIA_TYPE_BASET:
1098 ethtool_link_ksettings_add_link_mode(ks, supported, TP);
1099 ethtool_link_ksettings_add_link_mode(ks, advertising, TP);
1100 ks->base.port = PORT_TP;
1102 case I40E_MEDIA_TYPE_DA:
1103 case I40E_MEDIA_TYPE_CX4:
1104 ethtool_link_ksettings_add_link_mode(ks, supported, FIBRE);
1105 ethtool_link_ksettings_add_link_mode(ks, advertising, FIBRE);
1106 ks->base.port = PORT_DA;
1108 case I40E_MEDIA_TYPE_FIBER:
1109 ethtool_link_ksettings_add_link_mode(ks, supported, FIBRE);
1110 ethtool_link_ksettings_add_link_mode(ks, advertising, FIBRE);
1111 ks->base.port = PORT_FIBRE;
1113 case I40E_MEDIA_TYPE_UNKNOWN:
1115 ks->base.port = PORT_OTHER;
1119 /* Set flow control settings */
1120 ethtool_link_ksettings_add_link_mode(ks, supported, Pause);
1121 ethtool_link_ksettings_add_link_mode(ks, supported, Asym_Pause);
1123 switch (hw->fc.requested_mode) {
1125 ethtool_link_ksettings_add_link_mode(ks, advertising, Pause);
1127 case I40E_FC_TX_PAUSE:
1128 ethtool_link_ksettings_add_link_mode(ks, advertising,
1131 case I40E_FC_RX_PAUSE:
1132 ethtool_link_ksettings_add_link_mode(ks, advertising, Pause);
1133 ethtool_link_ksettings_add_link_mode(ks, advertising,
1137 ethtool_link_ksettings_del_link_mode(ks, advertising, Pause);
1138 ethtool_link_ksettings_del_link_mode(ks, advertising,
1146 #define I40E_LBIT_SIZE 8
1148 * i40e_speed_to_link_speed - Translate decimal speed to i40e_aq_link_speed
1149 * @speed: speed in decimal
1150 * @ks: ethtool ksettings
1152 * Return i40e_aq_link_speed based on speed
1154 static enum i40e_aq_link_speed
1155 i40e_speed_to_link_speed(__u32 speed, const struct ethtool_link_ksettings *ks)
1157 enum i40e_aq_link_speed link_speed = I40E_LINK_SPEED_UNKNOWN;
1158 bool speed_changed = false;
1161 static const struct {
1163 enum i40e_aq_link_speed link_speed;
1164 __u8 bit[I40E_LBIT_SIZE];
1165 } i40e_speed_lut[] = {
1166 #define I40E_LBIT(mode) ETHTOOL_LINK_MODE_ ## mode ##_Full_BIT
1167 {SPEED_100, I40E_LINK_SPEED_100MB, {I40E_LBIT(100baseT)} },
1168 {SPEED_1000, I40E_LINK_SPEED_1GB,
1169 {I40E_LBIT(1000baseT), I40E_LBIT(1000baseX),
1170 I40E_LBIT(1000baseKX)} },
1171 {SPEED_10000, I40E_LINK_SPEED_10GB,
1172 {I40E_LBIT(10000baseT), I40E_LBIT(10000baseKR),
1173 I40E_LBIT(10000baseLR), I40E_LBIT(10000baseCR),
1174 I40E_LBIT(10000baseSR), I40E_LBIT(10000baseKX4)} },
1176 {SPEED_25000, I40E_LINK_SPEED_25GB,
1177 {I40E_LBIT(25000baseCR), I40E_LBIT(25000baseKR),
1178 I40E_LBIT(25000baseSR)} },
1179 {SPEED_40000, I40E_LINK_SPEED_40GB,
1180 {I40E_LBIT(40000baseKR4), I40E_LBIT(40000baseCR4),
1181 I40E_LBIT(40000baseSR4), I40E_LBIT(40000baseLR4)} },
1182 {SPEED_20000, I40E_LINK_SPEED_20GB,
1183 {I40E_LBIT(20000baseKR2)} },
1184 {SPEED_2500, I40E_LINK_SPEED_2_5GB, {I40E_LBIT(2500baseT)} },
1185 {SPEED_5000, I40E_LINK_SPEED_5GB, {I40E_LBIT(2500baseT)} }
1189 for (i = 0; i < ARRAY_SIZE(i40e_speed_lut); i++) {
1190 if (i40e_speed_lut[i].speed == speed) {
1191 for (j = 0; j < I40E_LBIT_SIZE; j++) {
1192 if (test_bit(i40e_speed_lut[i].bit[j],
1193 ks->link_modes.supported)) {
1194 speed_changed = true;
1197 if (!i40e_speed_lut[i].bit[j])
1200 if (speed_changed) {
1201 link_speed = i40e_speed_lut[i].link_speed;
1209 #undef I40E_LBIT_SIZE
1212 * i40e_set_link_ksettings - Set Speed and Duplex
1213 * @netdev: network interface device structure
1214 * @ks: ethtool ksettings
1216 * Set speed/duplex per media_types advertised/forced
1218 static int i40e_set_link_ksettings(struct net_device *netdev,
1219 const struct ethtool_link_ksettings *ks)
1221 struct i40e_netdev_priv *np = netdev_priv(netdev);
1222 struct i40e_aq_get_phy_abilities_resp abilities;
1223 struct ethtool_link_ksettings safe_ks;
1224 struct ethtool_link_ksettings copy_ks;
1225 struct i40e_aq_set_phy_config config;
1226 struct i40e_pf *pf = np->vsi->back;
1227 enum i40e_aq_link_speed link_speed;
1228 struct i40e_vsi *vsi = np->vsi;
1229 struct i40e_hw *hw = &pf->hw;
1230 bool autoneg_changed = false;
1237 /* Changing port settings is not supported if this isn't the
1238 * port's controlling PF
1240 if (hw->partition_id != 1) {
1241 i40e_partition_setting_complaint(pf);
1244 if (vsi != pf->vsi[pf->lan_vsi])
1246 if (hw->phy.media_type != I40E_MEDIA_TYPE_BASET &&
1247 hw->phy.media_type != I40E_MEDIA_TYPE_FIBER &&
1248 hw->phy.media_type != I40E_MEDIA_TYPE_BACKPLANE &&
1249 hw->phy.media_type != I40E_MEDIA_TYPE_DA &&
1250 hw->phy.link_info.link_info & I40E_AQ_LINK_UP)
1252 if (hw->device_id == I40E_DEV_ID_KX_B ||
1253 hw->device_id == I40E_DEV_ID_KX_C ||
1254 hw->device_id == I40E_DEV_ID_20G_KR2 ||
1255 hw->device_id == I40E_DEV_ID_20G_KR2_A ||
1256 hw->device_id == I40E_DEV_ID_25G_B ||
1257 hw->device_id == I40E_DEV_ID_KX_X722) {
1258 netdev_info(netdev, "Changing settings is not supported on backplane.\n");
1262 /* copy the ksettings to copy_ks to avoid modifying the origin */
1263 memcpy(©_ks, ks, sizeof(struct ethtool_link_ksettings));
1265 /* save autoneg out of ksettings */
1266 autoneg = copy_ks.base.autoneg;
1267 speed = copy_ks.base.speed;
1269 /* get our own copy of the bits to check against */
1270 memset(&safe_ks, 0, sizeof(struct ethtool_link_ksettings));
1271 safe_ks.base.cmd = copy_ks.base.cmd;
1272 safe_ks.base.link_mode_masks_nwords =
1273 copy_ks.base.link_mode_masks_nwords;
1274 i40e_get_link_ksettings(netdev, &safe_ks);
1276 /* Get link modes supported by hardware and check against modes
1277 * requested by the user. Return an error if unsupported mode was set.
1279 if (!bitmap_subset(copy_ks.link_modes.advertising,
1280 safe_ks.link_modes.supported,
1281 __ETHTOOL_LINK_MODE_MASK_NBITS))
1284 /* set autoneg back to what it currently is */
1285 copy_ks.base.autoneg = safe_ks.base.autoneg;
1286 copy_ks.base.speed = safe_ks.base.speed;
1288 /* If copy_ks.base and safe_ks.base are not the same now, then they are
1289 * trying to set something that we do not support.
1291 if (memcmp(©_ks.base, &safe_ks.base,
1292 sizeof(struct ethtool_link_settings))) {
1293 netdev_err(netdev, "Only speed and autoneg are supported.\n");
1297 while (test_and_set_bit(__I40E_CONFIG_BUSY, pf->state)) {
1301 usleep_range(1000, 2000);
1304 /* Get the current phy config */
1305 status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
1312 /* Copy abilities to config in case autoneg is not
1315 memset(&config, 0, sizeof(struct i40e_aq_set_phy_config));
1316 config.abilities = abilities.abilities;
1319 if (autoneg == AUTONEG_ENABLE) {
1320 /* If autoneg was not already enabled */
1321 if (!(hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED)) {
1322 /* If autoneg is not supported, return error */
1323 if (!ethtool_link_ksettings_test_link_mode(&safe_ks,
1326 netdev_info(netdev, "Autoneg not supported on this phy\n");
1330 /* Autoneg is allowed to change */
1331 config.abilities = abilities.abilities |
1332 I40E_AQ_PHY_ENABLE_AN;
1333 autoneg_changed = true;
1336 /* If autoneg is currently enabled */
1337 if (hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED) {
1338 /* If autoneg is supported 10GBASE_T is the only PHY
1339 * that can disable it, so otherwise return error
1341 if (ethtool_link_ksettings_test_link_mode(&safe_ks,
1344 hw->phy.media_type != I40E_MEDIA_TYPE_BASET) {
1345 netdev_info(netdev, "Autoneg cannot be disabled on this phy\n");
1349 /* Autoneg is allowed to change */
1350 config.abilities = abilities.abilities &
1351 ~I40E_AQ_PHY_ENABLE_AN;
1352 autoneg_changed = true;
1356 if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1358 config.link_speed |= I40E_LINK_SPEED_100MB;
1359 if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1361 ethtool_link_ksettings_test_link_mode(ks, advertising,
1363 ethtool_link_ksettings_test_link_mode(ks, advertising,
1365 config.link_speed |= I40E_LINK_SPEED_1GB;
1366 if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1368 ethtool_link_ksettings_test_link_mode(ks, advertising,
1369 10000baseKX4_Full) ||
1370 ethtool_link_ksettings_test_link_mode(ks, advertising,
1371 10000baseKR_Full) ||
1372 ethtool_link_ksettings_test_link_mode(ks, advertising,
1373 10000baseCR_Full) ||
1374 ethtool_link_ksettings_test_link_mode(ks, advertising,
1375 10000baseSR_Full) ||
1376 ethtool_link_ksettings_test_link_mode(ks, advertising,
1378 config.link_speed |= I40E_LINK_SPEED_10GB;
1379 if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1381 config.link_speed |= I40E_LINK_SPEED_2_5GB;
1382 if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1384 config.link_speed |= I40E_LINK_SPEED_5GB;
1385 if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1387 config.link_speed |= I40E_LINK_SPEED_20GB;
1388 if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1389 25000baseCR_Full) ||
1390 ethtool_link_ksettings_test_link_mode(ks, advertising,
1391 25000baseKR_Full) ||
1392 ethtool_link_ksettings_test_link_mode(ks, advertising,
1394 config.link_speed |= I40E_LINK_SPEED_25GB;
1395 if (ethtool_link_ksettings_test_link_mode(ks, advertising,
1396 40000baseKR4_Full) ||
1397 ethtool_link_ksettings_test_link_mode(ks, advertising,
1398 40000baseCR4_Full) ||
1399 ethtool_link_ksettings_test_link_mode(ks, advertising,
1400 40000baseSR4_Full) ||
1401 ethtool_link_ksettings_test_link_mode(ks, advertising,
1403 config.link_speed |= I40E_LINK_SPEED_40GB;
1405 /* Autonegotiation must be disabled to change speed */
1406 if ((speed != SPEED_UNKNOWN && safe_ks.base.speed != speed) &&
1407 (autoneg == AUTONEG_DISABLE ||
1408 (safe_ks.base.autoneg == AUTONEG_DISABLE && !autoneg_changed))) {
1409 link_speed = i40e_speed_to_link_speed(speed, ks);
1410 if (link_speed == I40E_LINK_SPEED_UNKNOWN) {
1411 netdev_info(netdev, "Given speed is not supported\n");
1415 config.link_speed = link_speed;
1418 if (safe_ks.base.speed != speed) {
1420 "Unable to set speed, disable autoneg\n");
1426 /* If speed didn't get set, set it to what it currently is.
1427 * This is needed because if advertise is 0 (as it is when autoneg
1428 * is disabled) then speed won't get set.
1430 if (!config.link_speed)
1431 config.link_speed = abilities.link_speed;
1432 if (autoneg_changed || abilities.link_speed != config.link_speed) {
1433 /* copy over the rest of the abilities */
1434 config.phy_type = abilities.phy_type;
1435 config.phy_type_ext = abilities.phy_type_ext;
1436 config.eee_capability = abilities.eee_capability;
1437 config.eeer = abilities.eeer_val;
1438 config.low_power_ctrl = abilities.d3_lpan;
1439 config.fec_config = abilities.fec_cfg_curr_mod_ext_info &
1440 I40E_AQ_PHY_FEC_CONFIG_MASK;
1442 /* save the requested speeds */
1443 hw->phy.link_info.requested_speeds = config.link_speed;
1444 /* set link and auto negotiation so changes take effect */
1445 config.abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
1446 /* If link is up put link down */
1447 if (hw->phy.link_info.link_info & I40E_AQ_LINK_UP) {
1448 /* Tell the OS link is going down, the link will go
1449 * back up when fw says it is ready asynchronously
1451 i40e_print_link_message(vsi, false);
1452 netif_carrier_off(netdev);
1453 netif_tx_stop_all_queues(netdev);
1456 /* make the aq call */
1457 status = i40e_aq_set_phy_config(hw, &config, NULL);
1460 "Set phy config failed, err %pe aq_err %s\n",
1462 i40e_aq_str(hw, hw->aq.asq_last_status));
1467 status = i40e_update_link_info(hw);
1470 "Updating link info failed with err %pe aq_err %s\n",
1472 i40e_aq_str(hw, hw->aq.asq_last_status));
1475 netdev_info(netdev, "Nothing changed, exiting without setting anything.\n");
1479 clear_bit(__I40E_CONFIG_BUSY, pf->state);
1484 static int i40e_set_fec_cfg(struct net_device *netdev, u8 fec_cfg)
1486 struct i40e_netdev_priv *np = netdev_priv(netdev);
1487 struct i40e_aq_get_phy_abilities_resp abilities;
1488 struct i40e_pf *pf = np->vsi->back;
1489 struct i40e_hw *hw = &pf->hw;
1493 /* Get the current phy config */
1494 memset(&abilities, 0, sizeof(abilities));
1495 status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
1502 if (abilities.fec_cfg_curr_mod_ext_info != fec_cfg) {
1503 struct i40e_aq_set_phy_config config;
1505 memset(&config, 0, sizeof(config));
1506 config.phy_type = abilities.phy_type;
1507 config.abilities = abilities.abilities |
1508 I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
1509 config.phy_type_ext = abilities.phy_type_ext;
1510 config.link_speed = abilities.link_speed;
1511 config.eee_capability = abilities.eee_capability;
1512 config.eeer = abilities.eeer_val;
1513 config.low_power_ctrl = abilities.d3_lpan;
1514 config.fec_config = fec_cfg & I40E_AQ_PHY_FEC_CONFIG_MASK;
1515 status = i40e_aq_set_phy_config(hw, &config, NULL);
1518 "Set phy config failed, err %pe aq_err %s\n",
1520 i40e_aq_str(hw, hw->aq.asq_last_status));
1524 i40e_set_fec_in_flags(fec_cfg, pf->flags);
1525 status = i40e_update_link_info(hw);
1527 /* debug level message only due to relation to the link
1528 * itself rather than to the FEC settings
1529 * (e.g. no physical connection etc.)
1532 "Updating link info failed with err %pe aq_err %s\n",
1534 i40e_aq_str(hw, hw->aq.asq_last_status));
1541 static int i40e_get_fec_param(struct net_device *netdev,
1542 struct ethtool_fecparam *fecparam)
1544 struct i40e_netdev_priv *np = netdev_priv(netdev);
1545 struct i40e_aq_get_phy_abilities_resp abilities;
1546 struct i40e_pf *pf = np->vsi->back;
1547 struct i40e_hw *hw = &pf->hw;
1552 /* Get the current phy config */
1553 memset(&abilities, 0, sizeof(abilities));
1554 status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
1562 fec_cfg = abilities.fec_cfg_curr_mod_ext_info;
1563 if (fec_cfg & I40E_AQ_SET_FEC_AUTO)
1564 fecparam->fec |= ETHTOOL_FEC_AUTO;
1565 else if (fec_cfg & (I40E_AQ_SET_FEC_REQUEST_RS |
1566 I40E_AQ_SET_FEC_ABILITY_RS))
1567 fecparam->fec |= ETHTOOL_FEC_RS;
1568 else if (fec_cfg & (I40E_AQ_SET_FEC_REQUEST_KR |
1569 I40E_AQ_SET_FEC_ABILITY_KR))
1570 fecparam->fec |= ETHTOOL_FEC_BASER;
1572 fecparam->fec |= ETHTOOL_FEC_OFF;
1574 if (hw->phy.link_info.fec_info & I40E_AQ_CONFIG_FEC_KR_ENA)
1575 fecparam->active_fec = ETHTOOL_FEC_BASER;
1576 else if (hw->phy.link_info.fec_info & I40E_AQ_CONFIG_FEC_RS_ENA)
1577 fecparam->active_fec = ETHTOOL_FEC_RS;
1579 fecparam->active_fec = ETHTOOL_FEC_OFF;
1584 static int i40e_set_fec_param(struct net_device *netdev,
1585 struct ethtool_fecparam *fecparam)
1587 struct i40e_netdev_priv *np = netdev_priv(netdev);
1588 struct i40e_pf *pf = np->vsi->back;
1589 struct i40e_hw *hw = &pf->hw;
1592 if (hw->device_id != I40E_DEV_ID_25G_SFP28 &&
1593 hw->device_id != I40E_DEV_ID_25G_B &&
1594 hw->device_id != I40E_DEV_ID_KX_X722)
1597 if (hw->mac.type == I40E_MAC_X722 &&
1598 !test_bit(I40E_HW_CAP_X722_FEC_REQUEST, hw->caps)) {
1599 netdev_err(netdev, "Setting FEC encoding not supported by firmware. Please update the NVM image.\n");
1603 switch (fecparam->fec) {
1604 case ETHTOOL_FEC_AUTO:
1605 fec_cfg = I40E_AQ_SET_FEC_AUTO;
1607 case ETHTOOL_FEC_RS:
1608 fec_cfg = (I40E_AQ_SET_FEC_REQUEST_RS |
1609 I40E_AQ_SET_FEC_ABILITY_RS);
1611 case ETHTOOL_FEC_BASER:
1612 fec_cfg = (I40E_AQ_SET_FEC_REQUEST_KR |
1613 I40E_AQ_SET_FEC_ABILITY_KR);
1615 case ETHTOOL_FEC_OFF:
1616 case ETHTOOL_FEC_NONE:
1620 dev_warn(&pf->pdev->dev, "Unsupported FEC mode: %d",
1625 return i40e_set_fec_cfg(netdev, fec_cfg);
1628 static int i40e_nway_reset(struct net_device *netdev)
1630 /* restart autonegotiation */
1631 struct i40e_netdev_priv *np = netdev_priv(netdev);
1632 struct i40e_pf *pf = np->vsi->back;
1633 struct i40e_hw *hw = &pf->hw;
1634 bool link_up = hw->phy.link_info.link_info & I40E_AQ_LINK_UP;
1637 ret = i40e_aq_set_link_restart_an(hw, link_up, NULL);
1639 netdev_info(netdev, "link restart failed, err %pe aq_err %s\n",
1641 i40e_aq_str(hw, hw->aq.asq_last_status));
1649 * i40e_get_pauseparam - Get Flow Control status
1650 * @netdev: netdevice structure
1651 * @pause: buffer to return pause parameters
1653 * Return tx/rx-pause status
1655 static void i40e_get_pauseparam(struct net_device *netdev,
1656 struct ethtool_pauseparam *pause)
1658 struct i40e_netdev_priv *np = netdev_priv(netdev);
1659 struct i40e_pf *pf = np->vsi->back;
1660 struct i40e_hw *hw = &pf->hw;
1661 struct i40e_link_status *hw_link_info = &hw->phy.link_info;
1662 struct i40e_dcbx_config *dcbx_cfg = &hw->local_dcbx_config;
1665 ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
1666 AUTONEG_ENABLE : AUTONEG_DISABLE);
1668 /* PFC enabled so report LFC as off */
1669 if (dcbx_cfg->pfc.pfcenable) {
1670 pause->rx_pause = 0;
1671 pause->tx_pause = 0;
1675 if (hw->fc.current_mode == I40E_FC_RX_PAUSE) {
1676 pause->rx_pause = 1;
1677 } else if (hw->fc.current_mode == I40E_FC_TX_PAUSE) {
1678 pause->tx_pause = 1;
1679 } else if (hw->fc.current_mode == I40E_FC_FULL) {
1680 pause->rx_pause = 1;
1681 pause->tx_pause = 1;
1686 * i40e_set_pauseparam - Set Flow Control parameter
1687 * @netdev: network interface device structure
1688 * @pause: return tx/rx flow control status
1690 static int i40e_set_pauseparam(struct net_device *netdev,
1691 struct ethtool_pauseparam *pause)
1693 struct i40e_netdev_priv *np = netdev_priv(netdev);
1694 struct i40e_pf *pf = np->vsi->back;
1695 struct i40e_vsi *vsi = np->vsi;
1696 struct i40e_hw *hw = &pf->hw;
1697 struct i40e_link_status *hw_link_info = &hw->phy.link_info;
1698 struct i40e_dcbx_config *dcbx_cfg = &hw->local_dcbx_config;
1699 bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
1705 /* Changing the port's flow control is not supported if this isn't the
1706 * port's controlling PF
1708 if (hw->partition_id != 1) {
1709 i40e_partition_setting_complaint(pf);
1713 if (vsi != pf->vsi[pf->lan_vsi])
1716 is_an = hw_link_info->an_info & I40E_AQ_AN_COMPLETED;
1717 if (pause->autoneg != is_an) {
1718 netdev_info(netdev, "To change autoneg please use: ethtool -s <dev> autoneg <on|off>\n");
1722 /* If we have link and don't have autoneg */
1723 if (!test_bit(__I40E_DOWN, pf->state) && !is_an) {
1724 /* Send message that it might not necessarily work*/
1725 netdev_info(netdev, "Autoneg did not complete so changing settings may not result in an actual change.\n");
1728 if (dcbx_cfg->pfc.pfcenable) {
1730 "Priority flow control enabled. Cannot set link flow control.\n");
1734 if (pause->rx_pause && pause->tx_pause)
1735 hw->fc.requested_mode = I40E_FC_FULL;
1736 else if (pause->rx_pause && !pause->tx_pause)
1737 hw->fc.requested_mode = I40E_FC_RX_PAUSE;
1738 else if (!pause->rx_pause && pause->tx_pause)
1739 hw->fc.requested_mode = I40E_FC_TX_PAUSE;
1740 else if (!pause->rx_pause && !pause->tx_pause)
1741 hw->fc.requested_mode = I40E_FC_NONE;
1745 /* Tell the OS link is going down, the link will go back up when fw
1746 * says it is ready asynchronously
1748 i40e_print_link_message(vsi, false);
1749 netif_carrier_off(netdev);
1750 netif_tx_stop_all_queues(netdev);
1752 /* Set the fc mode and only restart an if link is up*/
1753 status = i40e_set_fc(hw, &aq_failures, link_up);
1755 if (aq_failures & I40E_SET_FC_AQ_FAIL_GET) {
1756 netdev_info(netdev, "Set fc failed on the get_phy_capabilities call with err %pe aq_err %s\n",
1758 i40e_aq_str(hw, hw->aq.asq_last_status));
1761 if (aq_failures & I40E_SET_FC_AQ_FAIL_SET) {
1762 netdev_info(netdev, "Set fc failed on the set_phy_config call with err %pe aq_err %s\n",
1764 i40e_aq_str(hw, hw->aq.asq_last_status));
1767 if (aq_failures & I40E_SET_FC_AQ_FAIL_UPDATE) {
1768 netdev_info(netdev, "Set fc failed on the get_link_info call with err %pe aq_err %s\n",
1770 i40e_aq_str(hw, hw->aq.asq_last_status));
1774 if (!test_bit(__I40E_DOWN, pf->state) && is_an) {
1775 /* Give it a little more time to try to come back */
1777 if (!test_bit(__I40E_DOWN, pf->state))
1778 return i40e_nway_reset(netdev);
1784 static u32 i40e_get_msglevel(struct net_device *netdev)
1786 struct i40e_netdev_priv *np = netdev_priv(netdev);
1787 struct i40e_pf *pf = np->vsi->back;
1788 u32 debug_mask = pf->hw.debug_mask;
1791 netdev_info(netdev, "i40e debug_mask: 0x%08X\n", debug_mask);
1793 return pf->msg_enable;
1796 static void i40e_set_msglevel(struct net_device *netdev, u32 data)
1798 struct i40e_netdev_priv *np = netdev_priv(netdev);
1799 struct i40e_pf *pf = np->vsi->back;
1801 if (I40E_DEBUG_USER & data)
1802 pf->hw.debug_mask = data;
1804 pf->msg_enable = data;
1807 static int i40e_get_regs_len(struct net_device *netdev)
1812 for (i = 0; i40e_reg_list[i].offset != 0; i++)
1813 reg_count += i40e_reg_list[i].elements;
1815 return reg_count * sizeof(u32);
1818 static void i40e_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
1821 struct i40e_netdev_priv *np = netdev_priv(netdev);
1822 struct i40e_pf *pf = np->vsi->back;
1823 struct i40e_hw *hw = &pf->hw;
1825 unsigned int i, j, ri;
1828 /* Tell ethtool which driver-version-specific regs output we have.
1830 * At some point, if we have ethtool doing special formatting of
1831 * this data, it will rely on this version number to know how to
1832 * interpret things. Hence, this needs to be updated if/when the
1833 * diags register table is changed.
1837 /* loop through the diags reg table for what to print */
1839 for (i = 0; i40e_reg_list[i].offset != 0; i++) {
1840 for (j = 0; j < i40e_reg_list[i].elements; j++) {
1841 reg = i40e_reg_list[i].offset
1842 + (j * i40e_reg_list[i].stride);
1843 reg_buf[ri++] = rd32(hw, reg);
1849 static int i40e_get_eeprom(struct net_device *netdev,
1850 struct ethtool_eeprom *eeprom, u8 *bytes)
1852 struct i40e_netdev_priv *np = netdev_priv(netdev);
1853 struct i40e_hw *hw = &np->vsi->back->hw;
1854 struct i40e_pf *pf = np->vsi->back;
1855 int ret_val = 0, len, offset;
1861 #define I40E_NVM_SECTOR_SIZE 4096
1862 if (eeprom->len == 0)
1865 /* check for NVMUpdate access method */
1866 magic = hw->vendor_id | (hw->device_id << 16);
1867 if (eeprom->magic && eeprom->magic != magic) {
1868 struct i40e_nvm_access *cmd = (struct i40e_nvm_access *)eeprom;
1871 /* make sure it is the right magic for NVMUpdate */
1872 if ((eeprom->magic >> 16) != hw->device_id)
1874 else if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
1875 test_bit(__I40E_RESET_INTR_RECEIVED, pf->state))
1878 ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno);
1880 if ((errno || ret_val) && (hw->debug_mask & I40E_DEBUG_NVM))
1881 dev_info(&pf->pdev->dev,
1882 "NVMUpdate read failed err=%d status=0x%x errno=%d module=%d offset=0x%x size=%d\n",
1883 ret_val, hw->aq.asq_last_status, errno,
1884 (u8)(cmd->config & I40E_NVM_MOD_PNT_MASK),
1885 cmd->offset, cmd->data_size);
1890 /* normal ethtool get_eeprom support */
1891 eeprom->magic = hw->vendor_id | (hw->device_id << 16);
1893 eeprom_buff = kzalloc(eeprom->len, GFP_KERNEL);
1897 ret_val = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
1899 dev_info(&pf->pdev->dev,
1900 "Failed Acquiring NVM resource for read err=%d status=0x%x\n",
1901 ret_val, hw->aq.asq_last_status);
1905 sectors = eeprom->len / I40E_NVM_SECTOR_SIZE;
1906 sectors += (eeprom->len % I40E_NVM_SECTOR_SIZE) ? 1 : 0;
1907 len = I40E_NVM_SECTOR_SIZE;
1909 for (i = 0; i < sectors; i++) {
1910 if (i == (sectors - 1)) {
1911 len = eeprom->len - (I40E_NVM_SECTOR_SIZE * i);
1914 offset = eeprom->offset + (I40E_NVM_SECTOR_SIZE * i);
1915 ret_val = i40e_aq_read_nvm(hw, 0x0, offset, len,
1916 (u8 *)eeprom_buff + (I40E_NVM_SECTOR_SIZE * i),
1918 if (ret_val && hw->aq.asq_last_status == I40E_AQ_RC_EPERM) {
1919 dev_info(&pf->pdev->dev,
1920 "read NVM failed, invalid offset 0x%x\n",
1923 } else if (ret_val &&
1924 hw->aq.asq_last_status == I40E_AQ_RC_EACCES) {
1925 dev_info(&pf->pdev->dev,
1926 "read NVM failed, access, offset 0x%x\n",
1929 } else if (ret_val) {
1930 dev_info(&pf->pdev->dev,
1931 "read NVM failed offset %d err=%d status=0x%x\n",
1932 offset, ret_val, hw->aq.asq_last_status);
1937 i40e_release_nvm(hw);
1938 memcpy(bytes, (u8 *)eeprom_buff, eeprom->len);
1944 static int i40e_get_eeprom_len(struct net_device *netdev)
1946 struct i40e_netdev_priv *np = netdev_priv(netdev);
1947 struct i40e_hw *hw = &np->vsi->back->hw;
1950 #define X722_EEPROM_SCOPE_LIMIT 0x5B9FFF
1951 if (hw->mac.type == I40E_MAC_X722) {
1952 val = X722_EEPROM_SCOPE_LIMIT + 1;
1955 val = FIELD_GET(I40E_GLPCI_LBARCTRL_FL_SIZE_MASK,
1956 rd32(hw, I40E_GLPCI_LBARCTRL));
1957 /* register returns value in power of 2, 64Kbyte chunks. */
1958 val = (64 * 1024) * BIT(val);
1962 static int i40e_set_eeprom(struct net_device *netdev,
1963 struct ethtool_eeprom *eeprom, u8 *bytes)
1965 struct i40e_netdev_priv *np = netdev_priv(netdev);
1966 struct i40e_hw *hw = &np->vsi->back->hw;
1967 struct i40e_pf *pf = np->vsi->back;
1968 struct i40e_nvm_access *cmd = (struct i40e_nvm_access *)eeprom;
1973 /* normal ethtool set_eeprom is not supported */
1974 magic = hw->vendor_id | (hw->device_id << 16);
1975 if (eeprom->magic == magic)
1976 errno = -EOPNOTSUPP;
1977 /* check for NVMUpdate access method */
1978 else if (!eeprom->magic || (eeprom->magic >> 16) != hw->device_id)
1980 else if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
1981 test_bit(__I40E_RESET_INTR_RECEIVED, pf->state))
1984 ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno);
1986 if ((errno || ret_val) && (hw->debug_mask & I40E_DEBUG_NVM))
1987 dev_info(&pf->pdev->dev,
1988 "NVMUpdate write failed err=%d status=0x%x errno=%d module=%d offset=0x%x size=%d\n",
1989 ret_val, hw->aq.asq_last_status, errno,
1990 (u8)(cmd->config & I40E_NVM_MOD_PNT_MASK),
1991 cmd->offset, cmd->data_size);
1996 static void i40e_get_drvinfo(struct net_device *netdev,
1997 struct ethtool_drvinfo *drvinfo)
1999 struct i40e_netdev_priv *np = netdev_priv(netdev);
2000 struct i40e_vsi *vsi = np->vsi;
2001 struct i40e_pf *pf = vsi->back;
2003 strscpy(drvinfo->driver, i40e_driver_name, sizeof(drvinfo->driver));
2004 i40e_nvm_version_str(&pf->hw, drvinfo->fw_version,
2005 sizeof(drvinfo->fw_version));
2006 strscpy(drvinfo->bus_info, pci_name(pf->pdev),
2007 sizeof(drvinfo->bus_info));
2008 drvinfo->n_priv_flags = I40E_PRIV_FLAGS_STR_LEN;
2009 if (pf->hw.pf_id == 0)
2010 drvinfo->n_priv_flags += I40E_GL_PRIV_FLAGS_STR_LEN;
2013 static u32 i40e_get_max_num_descriptors(struct i40e_pf *pf)
2015 struct i40e_hw *hw = &pf->hw;
2017 switch (hw->mac.type) {
2018 case I40E_MAC_XL710:
2019 return I40E_MAX_NUM_DESCRIPTORS_XL710;
2021 return I40E_MAX_NUM_DESCRIPTORS;
2025 static void i40e_get_ringparam(struct net_device *netdev,
2026 struct ethtool_ringparam *ring,
2027 struct kernel_ethtool_ringparam *kernel_ring,
2028 struct netlink_ext_ack *extack)
2030 struct i40e_netdev_priv *np = netdev_priv(netdev);
2031 struct i40e_pf *pf = np->vsi->back;
2032 struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
2034 ring->rx_max_pending = i40e_get_max_num_descriptors(pf);
2035 ring->tx_max_pending = i40e_get_max_num_descriptors(pf);
2036 ring->rx_mini_max_pending = 0;
2037 ring->rx_jumbo_max_pending = 0;
2038 ring->rx_pending = vsi->rx_rings[0]->count;
2039 ring->tx_pending = vsi->tx_rings[0]->count;
2040 ring->rx_mini_pending = 0;
2041 ring->rx_jumbo_pending = 0;
2044 static bool i40e_active_tx_ring_index(struct i40e_vsi *vsi, u16 index)
2046 if (i40e_enabled_xdp_vsi(vsi)) {
2047 return index < vsi->num_queue_pairs ||
2048 (index >= vsi->alloc_queue_pairs &&
2049 index < vsi->alloc_queue_pairs + vsi->num_queue_pairs);
2052 return index < vsi->num_queue_pairs;
2055 static int i40e_set_ringparam(struct net_device *netdev,
2056 struct ethtool_ringparam *ring,
2057 struct kernel_ethtool_ringparam *kernel_ring,
2058 struct netlink_ext_ack *extack)
2060 u32 new_rx_count, new_tx_count, max_num_descriptors;
2061 struct i40e_ring *tx_rings = NULL, *rx_rings = NULL;
2062 struct i40e_netdev_priv *np = netdev_priv(netdev);
2063 struct i40e_hw *hw = &np->vsi->back->hw;
2064 struct i40e_vsi *vsi = np->vsi;
2065 struct i40e_pf *pf = vsi->back;
2066 u16 tx_alloc_queue_pairs;
2070 if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
2073 max_num_descriptors = i40e_get_max_num_descriptors(pf);
2074 if (ring->tx_pending > max_num_descriptors ||
2075 ring->tx_pending < I40E_MIN_NUM_DESCRIPTORS ||
2076 ring->rx_pending > max_num_descriptors ||
2077 ring->rx_pending < I40E_MIN_NUM_DESCRIPTORS) {
2079 "Descriptors requested (Tx: %d / Rx: %d) out of range [%d-%d]\n",
2080 ring->tx_pending, ring->rx_pending,
2081 I40E_MIN_NUM_DESCRIPTORS, max_num_descriptors);
2085 new_tx_count = ALIGN(ring->tx_pending, I40E_REQ_DESCRIPTOR_MULTIPLE);
2086 new_rx_count = ALIGN(ring->rx_pending, I40E_REQ_DESCRIPTOR_MULTIPLE);
2088 /* if nothing to do return success */
2089 if ((new_tx_count == vsi->tx_rings[0]->count) &&
2090 (new_rx_count == vsi->rx_rings[0]->count))
2093 /* If there is a AF_XDP page pool attached to any of Rx rings,
2094 * disallow changing the number of descriptors -- regardless
2095 * if the netdev is running or not.
2097 if (i40e_xsk_any_rx_ring_enabled(vsi))
2100 while (test_and_set_bit(__I40E_CONFIG_BUSY, pf->state)) {
2104 usleep_range(1000, 2000);
2107 if (!netif_running(vsi->netdev)) {
2108 /* simple case - set for the next time the netdev is started */
2109 for (i = 0; i < vsi->num_queue_pairs; i++) {
2110 vsi->tx_rings[i]->count = new_tx_count;
2111 vsi->rx_rings[i]->count = new_rx_count;
2112 if (i40e_enabled_xdp_vsi(vsi))
2113 vsi->xdp_rings[i]->count = new_tx_count;
2115 vsi->num_tx_desc = new_tx_count;
2116 vsi->num_rx_desc = new_rx_count;
2120 /* We can't just free everything and then setup again,
2121 * because the ISRs in MSI-X mode get passed pointers
2122 * to the Tx and Rx ring structs.
2125 /* alloc updated Tx and XDP Tx resources */
2126 tx_alloc_queue_pairs = vsi->alloc_queue_pairs *
2127 (i40e_enabled_xdp_vsi(vsi) ? 2 : 1);
2128 if (new_tx_count != vsi->tx_rings[0]->count) {
2130 "Changing Tx descriptor count from %d to %d.\n",
2131 vsi->tx_rings[0]->count, new_tx_count);
2132 tx_rings = kcalloc(tx_alloc_queue_pairs,
2133 sizeof(struct i40e_ring), GFP_KERNEL);
2139 for (i = 0; i < tx_alloc_queue_pairs; i++) {
2140 if (!i40e_active_tx_ring_index(vsi, i))
2143 tx_rings[i] = *vsi->tx_rings[i];
2144 tx_rings[i].count = new_tx_count;
2145 /* the desc and bi pointers will be reallocated in the
2148 tx_rings[i].desc = NULL;
2149 tx_rings[i].rx_bi = NULL;
2150 err = i40e_setup_tx_descriptors(&tx_rings[i]);
2154 if (!i40e_active_tx_ring_index(vsi, i))
2156 i40e_free_tx_resources(&tx_rings[i]);
2166 /* alloc updated Rx resources */
2167 if (new_rx_count != vsi->rx_rings[0]->count) {
2169 "Changing Rx descriptor count from %d to %d\n",
2170 vsi->rx_rings[0]->count, new_rx_count);
2171 rx_rings = kcalloc(vsi->alloc_queue_pairs,
2172 sizeof(struct i40e_ring), GFP_KERNEL);
2178 for (i = 0; i < vsi->num_queue_pairs; i++) {
2181 /* clone ring and setup updated count */
2182 rx_rings[i] = *vsi->rx_rings[i];
2183 rx_rings[i].count = new_rx_count;
2184 /* the desc and bi pointers will be reallocated in the
2187 rx_rings[i].desc = NULL;
2188 rx_rings[i].rx_bi = NULL;
2189 /* Clear cloned XDP RX-queue info before setup call */
2190 memset(&rx_rings[i].xdp_rxq, 0, sizeof(rx_rings[i].xdp_rxq));
2191 /* this is to allow wr32 to have something to write to
2192 * during early allocation of Rx buffers
2194 rx_rings[i].tail = hw->hw_addr + I40E_PRTGEN_STATUS;
2195 err = i40e_setup_rx_descriptors(&rx_rings[i]);
2199 /* now allocate the Rx buffers to make sure the OS
2200 * has enough memory, any failure here means abort
2202 unused = I40E_DESC_UNUSED(&rx_rings[i]);
2203 err = i40e_alloc_rx_buffers(&rx_rings[i], unused);
2207 i40e_free_rx_resources(&rx_rings[i]);
2217 /* Bring interface down, copy in the new ring info,
2218 * then restore the interface
2223 for (i = 0; i < tx_alloc_queue_pairs; i++) {
2224 if (i40e_active_tx_ring_index(vsi, i)) {
2225 i40e_free_tx_resources(vsi->tx_rings[i]);
2226 *vsi->tx_rings[i] = tx_rings[i];
2234 for (i = 0; i < vsi->num_queue_pairs; i++) {
2235 i40e_free_rx_resources(vsi->rx_rings[i]);
2236 /* get the real tail offset */
2237 rx_rings[i].tail = vsi->rx_rings[i]->tail;
2238 /* this is to fake out the allocation routine
2239 * into thinking it has to realloc everything
2240 * but the recycling logic will let us re-use
2241 * the buffers allocated above
2243 rx_rings[i].next_to_use = 0;
2244 rx_rings[i].next_to_clean = 0;
2245 rx_rings[i].next_to_alloc = 0;
2246 /* do a struct copy */
2247 *vsi->rx_rings[i] = rx_rings[i];
2253 vsi->num_tx_desc = new_tx_count;
2254 vsi->num_rx_desc = new_rx_count;
2258 /* error cleanup if the Rx allocations failed after getting Tx */
2260 for (i = 0; i < tx_alloc_queue_pairs; i++) {
2261 if (i40e_active_tx_ring_index(vsi, i))
2262 i40e_free_tx_resources(vsi->tx_rings[i]);
2269 clear_bit(__I40E_CONFIG_BUSY, pf->state);
2275 * i40e_get_stats_count - return the stats count for a device
2276 * @netdev: the netdev to return the count for
2278 * Returns the total number of statistics for this netdev. Note that even
2279 * though this is a function, it is required that the count for a specific
2280 * netdev must never change. Basing the count on static values such as the
2281 * maximum number of queues or the device type is ok. However, the API for
2282 * obtaining stats is *not* safe against changes based on non-static
2283 * values such as the *current* number of queues, or runtime flags.
2285 * If a statistic is not always enabled, return it as part of the count
2286 * anyways, always return its string, and report its value as zero.
2288 static int i40e_get_stats_count(struct net_device *netdev)
2290 struct i40e_netdev_priv *np = netdev_priv(netdev);
2291 struct i40e_vsi *vsi = np->vsi;
2292 struct i40e_pf *pf = vsi->back;
2295 if (vsi == pf->vsi[pf->lan_vsi] && pf->hw.partition_id == 1)
2296 stats_len = I40E_PF_STATS_LEN;
2298 stats_len = I40E_VSI_STATS_LEN;
2300 /* The number of stats reported for a given net_device must remain
2301 * constant throughout the life of that device.
2303 * This is because the API for obtaining the size, strings, and stats
2304 * is spread out over three separate ethtool ioctls. There is no safe
2305 * way to lock the number of stats across these calls, so we must
2306 * assume that they will never change.
2308 * Due to this, we report the maximum number of queues, even if not
2309 * every queue is currently configured. Since we always allocate
2310 * queues in pairs, we'll just use netdev->num_tx_queues * 2. This
2311 * works because the num_tx_queues is set at device creation and never
2314 stats_len += I40E_QUEUE_STATS_LEN * 2 * netdev->num_tx_queues;
2319 static int i40e_get_sset_count(struct net_device *netdev, int sset)
2321 struct i40e_netdev_priv *np = netdev_priv(netdev);
2322 struct i40e_vsi *vsi = np->vsi;
2323 struct i40e_pf *pf = vsi->back;
2327 return I40E_TEST_LEN;
2329 return i40e_get_stats_count(netdev);
2330 case ETH_SS_PRIV_FLAGS:
2331 return I40E_PRIV_FLAGS_STR_LEN +
2332 (pf->hw.pf_id == 0 ? I40E_GL_PRIV_FLAGS_STR_LEN : 0);
2339 * i40e_get_veb_tc_stats - copy VEB TC statistics to formatted structure
2340 * @tc: the TC statistics in VEB structure (veb->tc_stats)
2341 * @i: the index of traffic class in (veb->tc_stats) structure to copy
2343 * Copy VEB TC statistics from structure of arrays (veb->tc_stats) to
2344 * one dimensional structure i40e_cp_veb_tc_stats.
2345 * Produce formatted i40e_cp_veb_tc_stats structure of the VEB TC
2346 * statistics for the given TC.
2348 static struct i40e_cp_veb_tc_stats
2349 i40e_get_veb_tc_stats(struct i40e_veb_tc_stats *tc, unsigned int i)
2351 struct i40e_cp_veb_tc_stats veb_tc = {
2352 .tc_rx_packets = tc->tc_rx_packets[i],
2353 .tc_rx_bytes = tc->tc_rx_bytes[i],
2354 .tc_tx_packets = tc->tc_tx_packets[i],
2355 .tc_tx_bytes = tc->tc_tx_bytes[i],
2362 * i40e_get_pfc_stats - copy HW PFC statistics to formatted structure
2363 * @pf: the PF device structure
2364 * @i: the priority value to copy
2366 * The PFC stats are found as arrays in pf->stats, which is not easy to pass
2367 * into i40e_add_ethtool_stats. Produce a formatted i40e_pfc_stats structure
2368 * of the PFC stats for the given priority.
2370 static inline struct i40e_pfc_stats
2371 i40e_get_pfc_stats(struct i40e_pf *pf, unsigned int i)
2373 #define I40E_GET_PFC_STAT(stat, priority) \
2374 .stat = pf->stats.stat[priority]
2376 struct i40e_pfc_stats pfc = {
2377 I40E_GET_PFC_STAT(priority_xon_rx, i),
2378 I40E_GET_PFC_STAT(priority_xoff_rx, i),
2379 I40E_GET_PFC_STAT(priority_xon_tx, i),
2380 I40E_GET_PFC_STAT(priority_xoff_tx, i),
2381 I40E_GET_PFC_STAT(priority_xon_2_xoff, i),
2387 * i40e_get_ethtool_stats - copy stat values into supplied buffer
2388 * @netdev: the netdev to collect stats for
2389 * @stats: ethtool stats command structure
2390 * @data: ethtool supplied buffer
2392 * Copy the stats values for this netdev into the buffer. Expects data to be
2393 * pre-allocated to the size returned by i40e_get_stats_count.. Note that all
2394 * statistics must be copied in a static order, and the count must not change
2395 * for a given netdev. See i40e_get_stats_count for more details.
2397 * If a statistic is not currently valid (such as a disabled queue), this
2398 * function reports its value as zero.
2400 static void i40e_get_ethtool_stats(struct net_device *netdev,
2401 struct ethtool_stats *stats, u64 *data)
2403 struct i40e_netdev_priv *np = netdev_priv(netdev);
2404 struct i40e_vsi *vsi = np->vsi;
2405 struct i40e_pf *pf = vsi->back;
2406 struct i40e_veb *veb = NULL;
2411 i40e_update_stats(vsi);
2413 i40e_add_ethtool_stats(&data, i40e_get_vsi_stats_struct(vsi),
2414 i40e_gstrings_net_stats);
2416 i40e_add_ethtool_stats(&data, vsi, i40e_gstrings_misc_stats);
2419 for (i = 0; i < netdev->num_tx_queues; i++) {
2420 i40e_add_queue_stats(&data, READ_ONCE(vsi->tx_rings[i]));
2421 i40e_add_queue_stats(&data, READ_ONCE(vsi->rx_rings[i]));
2425 if (vsi != pf->vsi[pf->lan_vsi] || pf->hw.partition_id != 1)
2426 goto check_data_pointer;
2428 veb_stats = ((pf->lan_veb != I40E_NO_VEB) &&
2429 (pf->lan_veb < I40E_MAX_VEB) &&
2430 test_bit(I40E_FLAG_VEB_STATS_ENA, pf->flags));
2433 veb = pf->veb[pf->lan_veb];
2434 i40e_update_veb_stats(veb);
2437 /* If veb stats aren't enabled, pass NULL instead of the veb so that
2438 * we initialize stats to zero and update the data pointer
2441 i40e_add_ethtool_stats(&data, veb_stats ? veb : NULL,
2442 i40e_gstrings_veb_stats);
2444 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
2446 struct i40e_cp_veb_tc_stats veb_tc =
2447 i40e_get_veb_tc_stats(&veb->tc_stats, i);
2449 i40e_add_ethtool_stats(&data, &veb_tc,
2450 i40e_gstrings_veb_tc_stats);
2452 i40e_add_ethtool_stats(&data, NULL,
2453 i40e_gstrings_veb_tc_stats);
2456 i40e_add_ethtool_stats(&data, pf, i40e_gstrings_stats);
2458 for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
2459 struct i40e_pfc_stats pfc = i40e_get_pfc_stats(pf, i);
2461 i40e_add_ethtool_stats(&data, &pfc, i40e_gstrings_pfc_stats);
2465 WARN_ONCE(data - p != i40e_get_stats_count(netdev),
2466 "ethtool stats count mismatch!");
2470 * i40e_get_stat_strings - copy stat strings into supplied buffer
2471 * @netdev: the netdev to collect strings for
2472 * @data: supplied buffer to copy strings into
2474 * Copy the strings related to stats for this netdev. Expects data to be
2475 * pre-allocated with the size reported by i40e_get_stats_count. Note that the
2476 * strings must be copied in a static order and the total count must not
2477 * change for a given netdev. See i40e_get_stats_count for more details.
2479 static void i40e_get_stat_strings(struct net_device *netdev, u8 *data)
2481 struct i40e_netdev_priv *np = netdev_priv(netdev);
2482 struct i40e_vsi *vsi = np->vsi;
2483 struct i40e_pf *pf = vsi->back;
2487 i40e_add_stat_strings(&data, i40e_gstrings_net_stats);
2489 i40e_add_stat_strings(&data, i40e_gstrings_misc_stats);
2491 for (i = 0; i < netdev->num_tx_queues; i++) {
2492 i40e_add_stat_strings(&data, i40e_gstrings_queue_stats,
2494 i40e_add_stat_strings(&data, i40e_gstrings_queue_stats,
2498 if (vsi != pf->vsi[pf->lan_vsi] || pf->hw.partition_id != 1)
2499 goto check_data_pointer;
2501 i40e_add_stat_strings(&data, i40e_gstrings_veb_stats);
2503 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
2504 i40e_add_stat_strings(&data, i40e_gstrings_veb_tc_stats, i);
2506 i40e_add_stat_strings(&data, i40e_gstrings_stats);
2508 for (i = 0; i < I40E_MAX_USER_PRIORITY; i++)
2509 i40e_add_stat_strings(&data, i40e_gstrings_pfc_stats, i);
2512 WARN_ONCE(data - p != i40e_get_stats_count(netdev) * ETH_GSTRING_LEN,
2513 "stat strings count mismatch!");
2516 static void i40e_get_priv_flag_strings(struct net_device *netdev, u8 *data)
2518 struct i40e_netdev_priv *np = netdev_priv(netdev);
2519 struct i40e_vsi *vsi = np->vsi;
2520 struct i40e_pf *pf = vsi->back;
2524 for (i = 0; i < I40E_PRIV_FLAGS_STR_LEN; i++)
2525 ethtool_puts(&p, i40e_gstrings_priv_flags[i].flag_string);
2526 if (pf->hw.pf_id != 0)
2528 for (i = 0; i < I40E_GL_PRIV_FLAGS_STR_LEN; i++)
2529 ethtool_puts(&p, i40e_gl_gstrings_priv_flags[i].flag_string);
2532 static void i40e_get_strings(struct net_device *netdev, u32 stringset,
2535 switch (stringset) {
2537 memcpy(data, i40e_gstrings_test,
2538 I40E_TEST_LEN * ETH_GSTRING_LEN);
2541 i40e_get_stat_strings(netdev, data);
2543 case ETH_SS_PRIV_FLAGS:
2544 i40e_get_priv_flag_strings(netdev, data);
2551 static int i40e_get_ts_info(struct net_device *dev,
2552 struct ethtool_ts_info *info)
2554 struct i40e_pf *pf = i40e_netdev_to_pf(dev);
2556 /* only report HW timestamping if PTP is enabled */
2557 if (!test_bit(I40E_FLAG_PTP_ENA, pf->flags))
2558 return ethtool_op_get_ts_info(dev, info);
2560 info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE |
2561 SOF_TIMESTAMPING_RX_SOFTWARE |
2562 SOF_TIMESTAMPING_SOFTWARE |
2563 SOF_TIMESTAMPING_TX_HARDWARE |
2564 SOF_TIMESTAMPING_RX_HARDWARE |
2565 SOF_TIMESTAMPING_RAW_HARDWARE;
2568 info->phc_index = ptp_clock_index(pf->ptp_clock);
2570 info->phc_index = -1;
2572 info->tx_types = BIT(HWTSTAMP_TX_OFF) | BIT(HWTSTAMP_TX_ON);
2574 info->rx_filters = BIT(HWTSTAMP_FILTER_NONE) |
2575 BIT(HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
2576 BIT(HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
2577 BIT(HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ);
2579 if (test_bit(I40E_HW_CAP_PTP_L4, pf->hw.caps))
2580 info->rx_filters |= BIT(HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
2581 BIT(HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
2582 BIT(HWTSTAMP_FILTER_PTP_V2_EVENT) |
2583 BIT(HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
2584 BIT(HWTSTAMP_FILTER_PTP_V2_SYNC) |
2585 BIT(HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
2586 BIT(HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) |
2587 BIT(HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ);
2592 static u64 i40e_link_test(struct net_device *netdev, u64 *data)
2594 struct i40e_netdev_priv *np = netdev_priv(netdev);
2595 struct i40e_pf *pf = np->vsi->back;
2596 bool link_up = false;
2599 netif_info(pf, hw, netdev, "link test\n");
2600 status = i40e_get_link_status(&pf->hw, &link_up);
2602 netif_err(pf, drv, netdev, "link query timed out, please retry test\n");
2615 static u64 i40e_reg_test(struct net_device *netdev, u64 *data)
2617 struct i40e_netdev_priv *np = netdev_priv(netdev);
2618 struct i40e_pf *pf = np->vsi->back;
2620 netif_info(pf, hw, netdev, "register test\n");
2621 *data = i40e_diag_reg_test(&pf->hw);
2626 static u64 i40e_eeprom_test(struct net_device *netdev, u64 *data)
2628 struct i40e_netdev_priv *np = netdev_priv(netdev);
2629 struct i40e_pf *pf = np->vsi->back;
2631 netif_info(pf, hw, netdev, "eeprom test\n");
2632 *data = i40e_diag_eeprom_test(&pf->hw);
2634 /* forcebly clear the NVM Update state machine */
2635 pf->hw.nvmupd_state = I40E_NVMUPD_STATE_INIT;
2640 static u64 i40e_intr_test(struct net_device *netdev, u64 *data)
2642 struct i40e_netdev_priv *np = netdev_priv(netdev);
2643 struct i40e_pf *pf = np->vsi->back;
2644 u16 swc_old = pf->sw_int_count;
2646 netif_info(pf, hw, netdev, "interrupt test\n");
2647 wr32(&pf->hw, I40E_PFINT_DYN_CTL0,
2648 (I40E_PFINT_DYN_CTL0_INTENA_MASK |
2649 I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK |
2650 I40E_PFINT_DYN_CTL0_ITR_INDX_MASK |
2651 I40E_PFINT_DYN_CTL0_SW_ITR_INDX_ENA_MASK |
2652 I40E_PFINT_DYN_CTL0_SW_ITR_INDX_MASK));
2653 usleep_range(1000, 2000);
2654 *data = (swc_old == pf->sw_int_count);
2659 static inline bool i40e_active_vfs(struct i40e_pf *pf)
2661 struct i40e_vf *vfs = pf->vf;
2664 for (i = 0; i < pf->num_alloc_vfs; i++)
2665 if (test_bit(I40E_VF_STATE_ACTIVE, &vfs[i].vf_states))
2670 static inline bool i40e_active_vmdqs(struct i40e_pf *pf)
2672 return !!i40e_find_vsi_by_type(pf, I40E_VSI_VMDQ2);
2675 static void i40e_diag_test(struct net_device *netdev,
2676 struct ethtool_test *eth_test, u64 *data)
2678 struct i40e_netdev_priv *np = netdev_priv(netdev);
2679 bool if_running = netif_running(netdev);
2680 struct i40e_pf *pf = np->vsi->back;
2682 if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
2684 netif_info(pf, drv, netdev, "offline testing starting\n");
2686 set_bit(__I40E_TESTING, pf->state);
2688 if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
2689 test_bit(__I40E_RESET_INTR_RECEIVED, pf->state)) {
2690 dev_warn(&pf->pdev->dev,
2691 "Cannot start offline testing when PF is in reset state.\n");
2695 if (i40e_active_vfs(pf) || i40e_active_vmdqs(pf)) {
2696 dev_warn(&pf->pdev->dev,
2697 "Please take active VFs and Netqueues offline and restart the adapter before running NIC diagnostics\n");
2701 /* If the device is online then take it offline */
2703 /* indicate we're in test mode */
2706 /* This reset does not affect link - if it is
2707 * changed to a type of reset that does affect
2708 * link then the following link test would have
2709 * to be moved to before the reset
2711 i40e_do_reset(pf, BIT(__I40E_PF_RESET_REQUESTED), true);
2713 if (i40e_link_test(netdev, &data[I40E_ETH_TEST_LINK]))
2714 eth_test->flags |= ETH_TEST_FL_FAILED;
2716 if (i40e_eeprom_test(netdev, &data[I40E_ETH_TEST_EEPROM]))
2717 eth_test->flags |= ETH_TEST_FL_FAILED;
2719 if (i40e_intr_test(netdev, &data[I40E_ETH_TEST_INTR]))
2720 eth_test->flags |= ETH_TEST_FL_FAILED;
2722 /* run reg test last, a reset is required after it */
2723 if (i40e_reg_test(netdev, &data[I40E_ETH_TEST_REG]))
2724 eth_test->flags |= ETH_TEST_FL_FAILED;
2726 clear_bit(__I40E_TESTING, pf->state);
2727 i40e_do_reset(pf, BIT(__I40E_PF_RESET_REQUESTED), true);
2733 netif_info(pf, drv, netdev, "online testing starting\n");
2735 if (i40e_link_test(netdev, &data[I40E_ETH_TEST_LINK]))
2736 eth_test->flags |= ETH_TEST_FL_FAILED;
2738 /* Offline only tests, not run in online; pass by default */
2739 data[I40E_ETH_TEST_REG] = 0;
2740 data[I40E_ETH_TEST_EEPROM] = 0;
2741 data[I40E_ETH_TEST_INTR] = 0;
2744 netif_info(pf, drv, netdev, "testing finished\n");
2748 data[I40E_ETH_TEST_REG] = 1;
2749 data[I40E_ETH_TEST_EEPROM] = 1;
2750 data[I40E_ETH_TEST_INTR] = 1;
2751 data[I40E_ETH_TEST_LINK] = 1;
2752 eth_test->flags |= ETH_TEST_FL_FAILED;
2753 clear_bit(__I40E_TESTING, pf->state);
2754 netif_info(pf, drv, netdev, "testing failed\n");
2757 static void i40e_get_wol(struct net_device *netdev,
2758 struct ethtool_wolinfo *wol)
2760 struct i40e_netdev_priv *np = netdev_priv(netdev);
2761 struct i40e_pf *pf = np->vsi->back;
2762 struct i40e_hw *hw = &pf->hw;
2765 /* NVM bit on means WoL disabled for the port */
2766 i40e_read_nvm_word(hw, I40E_SR_NVM_WAKE_ON_LAN, &wol_nvm_bits);
2767 if ((BIT(hw->port) & wol_nvm_bits) || (hw->partition_id != 1)) {
2771 wol->supported = WAKE_MAGIC;
2772 wol->wolopts = (pf->wol_en ? WAKE_MAGIC : 0);
2777 * i40e_set_wol - set the WakeOnLAN configuration
2778 * @netdev: the netdev in question
2779 * @wol: the ethtool WoL setting data
2781 static int i40e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
2783 struct i40e_netdev_priv *np = netdev_priv(netdev);
2784 struct i40e_pf *pf = np->vsi->back;
2785 struct i40e_vsi *vsi = np->vsi;
2786 struct i40e_hw *hw = &pf->hw;
2789 /* WoL not supported if this isn't the controlling PF on the port */
2790 if (hw->partition_id != 1) {
2791 i40e_partition_setting_complaint(pf);
2795 if (vsi != pf->vsi[pf->lan_vsi])
2798 /* NVM bit on means WoL disabled for the port */
2799 i40e_read_nvm_word(hw, I40E_SR_NVM_WAKE_ON_LAN, &wol_nvm_bits);
2800 if (BIT(hw->port) & wol_nvm_bits)
2803 /* only magic packet is supported */
2804 if (wol->wolopts & ~WAKE_MAGIC)
2807 /* is this a new value? */
2808 if (pf->wol_en != !!wol->wolopts) {
2809 pf->wol_en = !!wol->wolopts;
2810 device_set_wakeup_enable(&pf->pdev->dev, pf->wol_en);
2816 static int i40e_set_phys_id(struct net_device *netdev,
2817 enum ethtool_phys_id_state state)
2819 struct i40e_netdev_priv *np = netdev_priv(netdev);
2820 struct i40e_pf *pf = np->vsi->back;
2821 struct i40e_hw *hw = &pf->hw;
2827 case ETHTOOL_ID_ACTIVE:
2828 if (!test_bit(I40E_HW_CAP_PHY_CONTROLS_LEDS, pf->hw.caps)) {
2829 pf->led_status = i40e_led_get(hw);
2831 if (!test_bit(I40E_HW_CAP_AQ_PHY_ACCESS, hw->caps))
2832 i40e_aq_set_phy_debug(hw, I40E_PHY_DEBUG_ALL,
2834 ret = i40e_led_get_phy(hw, &temp_status,
2836 pf->led_status = temp_status;
2840 if (!test_bit(I40E_HW_CAP_PHY_CONTROLS_LEDS, pf->hw.caps))
2841 i40e_led_set(hw, 0xf, false);
2843 ret = i40e_led_set_phy(hw, true, pf->led_status, 0);
2845 case ETHTOOL_ID_OFF:
2846 if (!test_bit(I40E_HW_CAP_PHY_CONTROLS_LEDS, pf->hw.caps))
2847 i40e_led_set(hw, 0x0, false);
2849 ret = i40e_led_set_phy(hw, false, pf->led_status, 0);
2851 case ETHTOOL_ID_INACTIVE:
2852 if (!test_bit(I40E_HW_CAP_PHY_CONTROLS_LEDS, pf->hw.caps)) {
2853 i40e_led_set(hw, pf->led_status, false);
2855 ret = i40e_led_set_phy(hw, false, pf->led_status,
2857 I40E_PHY_LED_MODE_ORIG));
2858 if (!test_bit(I40E_HW_CAP_AQ_PHY_ACCESS, hw->caps))
2859 i40e_aq_set_phy_debug(hw, 0, NULL);
2871 /* NOTE: i40e hardware uses a conversion factor of 2 for Interrupt
2872 * Throttle Rate (ITR) ie. ITR(1) = 2us ITR(10) = 20 us, and also
2873 * 125us (8000 interrupts per second) == ITR(62)
2877 * __i40e_get_coalesce - get per-queue coalesce settings
2878 * @netdev: the netdev to check
2879 * @ec: ethtool coalesce data structure
2880 * @queue: which queue to pick
2882 * Gets the per-queue settings for coalescence. Specifically Rx and Tx usecs
2883 * are per queue. If queue is <0 then we default to queue 0 as the
2884 * representative value.
2886 static int __i40e_get_coalesce(struct net_device *netdev,
2887 struct ethtool_coalesce *ec,
2890 struct i40e_netdev_priv *np = netdev_priv(netdev);
2891 struct i40e_ring *rx_ring, *tx_ring;
2892 struct i40e_vsi *vsi = np->vsi;
2894 ec->tx_max_coalesced_frames_irq = vsi->work_limit;
2896 /* rx and tx usecs has per queue value. If user doesn't specify the
2897 * queue, return queue 0's value to represent.
2901 else if (queue >= vsi->num_queue_pairs)
2904 rx_ring = vsi->rx_rings[queue];
2905 tx_ring = vsi->tx_rings[queue];
2907 if (ITR_IS_DYNAMIC(rx_ring->itr_setting))
2908 ec->use_adaptive_rx_coalesce = 1;
2910 if (ITR_IS_DYNAMIC(tx_ring->itr_setting))
2911 ec->use_adaptive_tx_coalesce = 1;
2913 ec->rx_coalesce_usecs = rx_ring->itr_setting & ~I40E_ITR_DYNAMIC;
2914 ec->tx_coalesce_usecs = tx_ring->itr_setting & ~I40E_ITR_DYNAMIC;
2916 /* we use the _usecs_high to store/set the interrupt rate limit
2917 * that the hardware supports, that almost but not quite
2918 * fits the original intent of the ethtool variable,
2919 * the rx_coalesce_usecs_high limits total interrupts
2920 * per second from both tx/rx sources.
2922 ec->rx_coalesce_usecs_high = vsi->int_rate_limit;
2923 ec->tx_coalesce_usecs_high = vsi->int_rate_limit;
2929 * i40e_get_coalesce - get a netdev's coalesce settings
2930 * @netdev: the netdev to check
2931 * @ec: ethtool coalesce data structure
2932 * @kernel_coal: ethtool CQE mode setting structure
2933 * @extack: extack for reporting error messages
2935 * Gets the coalesce settings for a particular netdev. Note that if user has
2936 * modified per-queue settings, this only guarantees to represent queue 0. See
2937 * __i40e_get_coalesce for more details.
2939 static int i40e_get_coalesce(struct net_device *netdev,
2940 struct ethtool_coalesce *ec,
2941 struct kernel_ethtool_coalesce *kernel_coal,
2942 struct netlink_ext_ack *extack)
2944 return __i40e_get_coalesce(netdev, ec, -1);
2948 * i40e_get_per_queue_coalesce - gets coalesce settings for particular queue
2949 * @netdev: netdev structure
2950 * @ec: ethtool's coalesce settings
2951 * @queue: the particular queue to read
2953 * Will read a specific queue's coalesce settings
2955 static int i40e_get_per_queue_coalesce(struct net_device *netdev, u32 queue,
2956 struct ethtool_coalesce *ec)
2958 return __i40e_get_coalesce(netdev, ec, queue);
2962 * i40e_set_itr_per_queue - set ITR values for specific queue
2963 * @vsi: the VSI to set values for
2964 * @ec: coalesce settings from ethtool
2965 * @queue: the queue to modify
2967 * Change the ITR settings for a specific queue.
2969 static void i40e_set_itr_per_queue(struct i40e_vsi *vsi,
2970 struct ethtool_coalesce *ec,
2973 struct i40e_ring *rx_ring = vsi->rx_rings[queue];
2974 struct i40e_ring *tx_ring = vsi->tx_rings[queue];
2975 struct i40e_pf *pf = vsi->back;
2976 struct i40e_hw *hw = &pf->hw;
2977 struct i40e_q_vector *q_vector;
2980 intrl = i40e_intrl_usec_to_reg(vsi->int_rate_limit);
2982 rx_ring->itr_setting = ITR_REG_ALIGN(ec->rx_coalesce_usecs);
2983 tx_ring->itr_setting = ITR_REG_ALIGN(ec->tx_coalesce_usecs);
2985 if (ec->use_adaptive_rx_coalesce)
2986 rx_ring->itr_setting |= I40E_ITR_DYNAMIC;
2988 rx_ring->itr_setting &= ~I40E_ITR_DYNAMIC;
2990 if (ec->use_adaptive_tx_coalesce)
2991 tx_ring->itr_setting |= I40E_ITR_DYNAMIC;
2993 tx_ring->itr_setting &= ~I40E_ITR_DYNAMIC;
2995 q_vector = rx_ring->q_vector;
2996 q_vector->rx.target_itr = ITR_TO_REG(rx_ring->itr_setting);
2998 q_vector = tx_ring->q_vector;
2999 q_vector->tx.target_itr = ITR_TO_REG(tx_ring->itr_setting);
3001 /* The interrupt handler itself will take care of programming
3002 * the Tx and Rx ITR values based on the values we have entered
3003 * into the q_vector, no need to write the values now.
3006 wr32(hw, I40E_PFINT_RATEN(q_vector->reg_idx), intrl);
3011 * __i40e_set_coalesce - set coalesce settings for particular queue
3012 * @netdev: the netdev to change
3013 * @ec: ethtool coalesce settings
3014 * @queue: the queue to change
3016 * Sets the coalesce settings for a particular queue.
3018 static int __i40e_set_coalesce(struct net_device *netdev,
3019 struct ethtool_coalesce *ec,
3022 struct i40e_netdev_priv *np = netdev_priv(netdev);
3023 u16 intrl_reg, cur_rx_itr, cur_tx_itr;
3024 struct i40e_vsi *vsi = np->vsi;
3025 struct i40e_pf *pf = vsi->back;
3028 if (ec->tx_max_coalesced_frames_irq)
3029 vsi->work_limit = ec->tx_max_coalesced_frames_irq;
3032 cur_rx_itr = vsi->rx_rings[0]->itr_setting;
3033 cur_tx_itr = vsi->tx_rings[0]->itr_setting;
3034 } else if (queue < vsi->num_queue_pairs) {
3035 cur_rx_itr = vsi->rx_rings[queue]->itr_setting;
3036 cur_tx_itr = vsi->tx_rings[queue]->itr_setting;
3038 netif_info(pf, drv, netdev, "Invalid queue value, queue range is 0 - %d\n",
3039 vsi->num_queue_pairs - 1);
3043 cur_tx_itr &= ~I40E_ITR_DYNAMIC;
3044 cur_rx_itr &= ~I40E_ITR_DYNAMIC;
3046 /* tx_coalesce_usecs_high is ignored, use rx-usecs-high instead */
3047 if (ec->tx_coalesce_usecs_high != vsi->int_rate_limit) {
3048 netif_info(pf, drv, netdev, "tx-usecs-high is not used, please program rx-usecs-high\n");
3052 if (ec->rx_coalesce_usecs_high > INTRL_REG_TO_USEC(I40E_MAX_INTRL)) {
3053 netif_info(pf, drv, netdev, "Invalid value, rx-usecs-high range is 0-%lu\n",
3054 INTRL_REG_TO_USEC(I40E_MAX_INTRL));
3058 if (ec->rx_coalesce_usecs != cur_rx_itr &&
3059 ec->use_adaptive_rx_coalesce) {
3060 netif_info(pf, drv, netdev, "RX interrupt moderation cannot be changed if adaptive-rx is enabled.\n");
3064 if (ec->rx_coalesce_usecs > I40E_MAX_ITR) {
3065 netif_info(pf, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n");
3069 if (ec->tx_coalesce_usecs != cur_tx_itr &&
3070 ec->use_adaptive_tx_coalesce) {
3071 netif_info(pf, drv, netdev, "TX interrupt moderation cannot be changed if adaptive-tx is enabled.\n");
3075 if (ec->tx_coalesce_usecs > I40E_MAX_ITR) {
3076 netif_info(pf, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n");
3080 if (ec->use_adaptive_rx_coalesce && !cur_rx_itr)
3081 ec->rx_coalesce_usecs = I40E_MIN_ITR;
3083 if (ec->use_adaptive_tx_coalesce && !cur_tx_itr)
3084 ec->tx_coalesce_usecs = I40E_MIN_ITR;
3086 intrl_reg = i40e_intrl_usec_to_reg(ec->rx_coalesce_usecs_high);
3087 vsi->int_rate_limit = INTRL_REG_TO_USEC(intrl_reg);
3088 if (vsi->int_rate_limit != ec->rx_coalesce_usecs_high) {
3089 netif_info(pf, drv, netdev, "Interrupt rate limit rounded down to %d\n",
3090 vsi->int_rate_limit);
3093 /* rx and tx usecs has per queue value. If user doesn't specify the
3094 * queue, apply to all queues.
3097 for (i = 0; i < vsi->num_queue_pairs; i++)
3098 i40e_set_itr_per_queue(vsi, ec, i);
3100 i40e_set_itr_per_queue(vsi, ec, queue);
3107 * i40e_set_coalesce - set coalesce settings for every queue on the netdev
3108 * @netdev: the netdev to change
3109 * @ec: ethtool coalesce settings
3110 * @kernel_coal: ethtool CQE mode setting structure
3111 * @extack: extack for reporting error messages
3113 * This will set each queue to the same coalesce settings.
3115 static int i40e_set_coalesce(struct net_device *netdev,
3116 struct ethtool_coalesce *ec,
3117 struct kernel_ethtool_coalesce *kernel_coal,
3118 struct netlink_ext_ack *extack)
3120 return __i40e_set_coalesce(netdev, ec, -1);
3124 * i40e_set_per_queue_coalesce - set specific queue's coalesce settings
3125 * @netdev: the netdev to change
3126 * @ec: ethtool's coalesce settings
3127 * @queue: the queue to change
3129 * Sets the specified queue's coalesce settings.
3131 static int i40e_set_per_queue_coalesce(struct net_device *netdev, u32 queue,
3132 struct ethtool_coalesce *ec)
3134 return __i40e_set_coalesce(netdev, ec, queue);
3138 * i40e_get_rss_hash_opts - Get RSS hash Input Set for each flow type
3139 * @pf: pointer to the physical function struct
3140 * @cmd: ethtool rxnfc command
3142 * Returns Success if the flow is supported, else Invalid Input.
3144 static int i40e_get_rss_hash_opts(struct i40e_pf *pf, struct ethtool_rxnfc *cmd)
3146 struct i40e_hw *hw = &pf->hw;
3152 switch (cmd->flow_type) {
3154 flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
3157 flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV4_UDP;
3160 flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV6_TCP;
3163 flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV6_UDP;
3166 case AH_ESP_V4_FLOW:
3171 case AH_ESP_V6_FLOW:
3175 /* Default is src/dest for IP, no matter the L4 hashing */
3176 cmd->data |= RXH_IP_SRC | RXH_IP_DST;
3182 /* Read flow based hash input set register */
3184 i_set = (u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(0,
3186 ((u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(1,
3187 flow_pctype)) << 32);
3190 /* Process bits of hash input set */
3192 if (i_set & I40E_L4_SRC_MASK)
3193 cmd->data |= RXH_L4_B_0_1;
3194 if (i_set & I40E_L4_DST_MASK)
3195 cmd->data |= RXH_L4_B_2_3;
3197 if (cmd->flow_type == TCP_V4_FLOW ||
3198 cmd->flow_type == UDP_V4_FLOW) {
3199 if (hw->mac.type == I40E_MAC_X722) {
3200 if (i_set & I40E_X722_L3_SRC_MASK)
3201 cmd->data |= RXH_IP_SRC;
3202 if (i_set & I40E_X722_L3_DST_MASK)
3203 cmd->data |= RXH_IP_DST;
3205 if (i_set & I40E_L3_SRC_MASK)
3206 cmd->data |= RXH_IP_SRC;
3207 if (i_set & I40E_L3_DST_MASK)
3208 cmd->data |= RXH_IP_DST;
3210 } else if (cmd->flow_type == TCP_V6_FLOW ||
3211 cmd->flow_type == UDP_V6_FLOW) {
3212 if (i_set & I40E_L3_V6_SRC_MASK)
3213 cmd->data |= RXH_IP_SRC;
3214 if (i_set & I40E_L3_V6_DST_MASK)
3215 cmd->data |= RXH_IP_DST;
3223 * i40e_check_mask - Check whether a mask field is set
3224 * @mask: the full mask value
3225 * @field: mask of the field to check
3227 * If the given mask is fully set, return positive value. If the mask for the
3228 * field is fully unset, return zero. Otherwise return a negative error code.
3230 static int i40e_check_mask(u64 mask, u64 field)
3232 u64 value = mask & field;
3243 * i40e_parse_rx_flow_user_data - Deconstruct user-defined data
3244 * @fsp: pointer to rx flow specification
3245 * @data: pointer to userdef data structure for storage
3247 * Read the user-defined data and deconstruct the value into a structure. No
3248 * other code should read the user-defined data, so as to ensure that every
3249 * place consistently reads the value correctly.
3251 * The user-defined field is a 64bit Big Endian format value, which we
3252 * deconstruct by reading bits or bit fields from it. Single bit flags shall
3253 * be defined starting from the highest bits, while small bit field values
3254 * shall be defined starting from the lowest bits.
3256 * Returns 0 if the data is valid, and non-zero if the userdef data is invalid
3257 * and the filter should be rejected. The data structure will always be
3258 * modified even if FLOW_EXT is not set.
3261 static int i40e_parse_rx_flow_user_data(struct ethtool_rx_flow_spec *fsp,
3262 struct i40e_rx_flow_userdef *data)
3267 /* Zero memory first so it's always consistent. */
3268 memset(data, 0, sizeof(*data));
3270 if (!(fsp->flow_type & FLOW_EXT))
3273 value = be64_to_cpu(*((__be64 *)fsp->h_ext.data));
3274 mask = be64_to_cpu(*((__be64 *)fsp->m_ext.data));
3276 #define I40E_USERDEF_FLEX_WORD GENMASK_ULL(15, 0)
3277 #define I40E_USERDEF_FLEX_OFFSET GENMASK_ULL(31, 16)
3278 #define I40E_USERDEF_FLEX_FILTER GENMASK_ULL(31, 0)
3280 valid = i40e_check_mask(mask, I40E_USERDEF_FLEX_FILTER);
3284 data->flex_word = value & I40E_USERDEF_FLEX_WORD;
3286 FIELD_GET(I40E_USERDEF_FLEX_OFFSET, value);
3287 data->flex_filter = true;
3294 * i40e_fill_rx_flow_user_data - Fill in user-defined data field
3295 * @fsp: pointer to rx_flow specification
3296 * @data: pointer to return userdef data
3298 * Reads the userdef data structure and properly fills in the user defined
3299 * fields of the rx_flow_spec.
3301 static void i40e_fill_rx_flow_user_data(struct ethtool_rx_flow_spec *fsp,
3302 struct i40e_rx_flow_userdef *data)
3304 u64 value = 0, mask = 0;
3306 if (data->flex_filter) {
3307 value |= data->flex_word;
3308 value |= (u64)data->flex_offset << 16;
3309 mask |= I40E_USERDEF_FLEX_FILTER;
3313 fsp->flow_type |= FLOW_EXT;
3315 *((__be64 *)fsp->h_ext.data) = cpu_to_be64(value);
3316 *((__be64 *)fsp->m_ext.data) = cpu_to_be64(mask);
3320 * i40e_get_ethtool_fdir_all - Populates the rule count of a command
3321 * @pf: Pointer to the physical function struct
3322 * @cmd: The command to get or set Rx flow classification rules
3323 * @rule_locs: Array of used rule locations
3325 * This function populates both the total and actual rule count of
3326 * the ethtool flow classification command
3328 * Returns 0 on success or -EMSGSIZE if entry not found
3330 static int i40e_get_ethtool_fdir_all(struct i40e_pf *pf,
3331 struct ethtool_rxnfc *cmd,
3334 struct i40e_fdir_filter *rule;
3335 struct hlist_node *node2;
3338 /* report total rule count */
3339 cmd->data = i40e_get_fd_cnt_all(pf);
3341 hlist_for_each_entry_safe(rule, node2,
3342 &pf->fdir_filter_list, fdir_node) {
3343 if (cnt == cmd->rule_cnt)
3346 rule_locs[cnt] = rule->fd_id;
3350 cmd->rule_cnt = cnt;
3356 * i40e_get_ethtool_fdir_entry - Look up a filter based on Rx flow
3357 * @pf: Pointer to the physical function struct
3358 * @cmd: The command to get or set Rx flow classification rules
3360 * This function looks up a filter based on the Rx flow classification
3361 * command and fills the flow spec info for it if found
3363 * Returns 0 on success or -EINVAL if filter not found
3365 static int i40e_get_ethtool_fdir_entry(struct i40e_pf *pf,
3366 struct ethtool_rxnfc *cmd)
3368 struct ethtool_rx_flow_spec *fsp =
3369 (struct ethtool_rx_flow_spec *)&cmd->fs;
3370 struct i40e_rx_flow_userdef userdef = {0};
3371 struct i40e_fdir_filter *rule = NULL;
3372 struct hlist_node *node2;
3376 hlist_for_each_entry_safe(rule, node2,
3377 &pf->fdir_filter_list, fdir_node) {
3378 if (fsp->location <= rule->fd_id)
3382 if (!rule || fsp->location != rule->fd_id)
3385 fsp->flow_type = rule->flow_type;
3386 if (fsp->flow_type == IP_USER_FLOW) {
3387 fsp->h_u.usr_ip4_spec.ip_ver = ETH_RX_NFC_IP4;
3388 fsp->h_u.usr_ip4_spec.proto = 0;
3389 fsp->m_u.usr_ip4_spec.proto = 0;
3392 if (fsp->flow_type == IPV6_USER_FLOW ||
3393 fsp->flow_type == UDP_V6_FLOW ||
3394 fsp->flow_type == TCP_V6_FLOW ||
3395 fsp->flow_type == SCTP_V6_FLOW) {
3396 /* Reverse the src and dest notion, since the HW views them
3397 * from Tx perspective where as the user expects it from
3400 fsp->h_u.tcp_ip6_spec.psrc = rule->dst_port;
3401 fsp->h_u.tcp_ip6_spec.pdst = rule->src_port;
3402 memcpy(fsp->h_u.tcp_ip6_spec.ip6dst, rule->src_ip6,
3403 sizeof(__be32) * 4);
3404 memcpy(fsp->h_u.tcp_ip6_spec.ip6src, rule->dst_ip6,
3405 sizeof(__be32) * 4);
3407 /* Reverse the src and dest notion, since the HW views them
3408 * from Tx perspective where as the user expects it from
3411 fsp->h_u.tcp_ip4_spec.psrc = rule->dst_port;
3412 fsp->h_u.tcp_ip4_spec.pdst = rule->src_port;
3413 fsp->h_u.tcp_ip4_spec.ip4src = rule->dst_ip;
3414 fsp->h_u.tcp_ip4_spec.ip4dst = rule->src_ip;
3417 switch (rule->flow_type) {
3419 index = I40E_FILTER_PCTYPE_NONF_IPV4_SCTP;
3422 index = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
3425 index = I40E_FILTER_PCTYPE_NONF_IPV4_UDP;
3428 index = I40E_FILTER_PCTYPE_NONF_IPV6_SCTP;
3431 index = I40E_FILTER_PCTYPE_NONF_IPV6_TCP;
3434 index = I40E_FILTER_PCTYPE_NONF_IPV6_UDP;
3437 index = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER;
3439 case IPV6_USER_FLOW:
3440 index = I40E_FILTER_PCTYPE_NONF_IPV6_OTHER;
3443 /* If we have stored a filter with a flow type not listed here
3444 * it is almost certainly a driver bug. WARN(), and then
3445 * assign the input_set as if all fields are enabled to avoid
3446 * reading unassigned memory.
3448 WARN(1, "Missing input set index for flow_type %d\n",
3450 input_set = 0xFFFFFFFFFFFFFFFFULL;
3454 input_set = i40e_read_fd_input_set(pf, index);
3457 if (input_set & I40E_L3_V6_SRC_MASK) {
3458 fsp->m_u.tcp_ip6_spec.ip6src[0] = htonl(0xFFFFFFFF);
3459 fsp->m_u.tcp_ip6_spec.ip6src[1] = htonl(0xFFFFFFFF);
3460 fsp->m_u.tcp_ip6_spec.ip6src[2] = htonl(0xFFFFFFFF);
3461 fsp->m_u.tcp_ip6_spec.ip6src[3] = htonl(0xFFFFFFFF);
3464 if (input_set & I40E_L3_V6_DST_MASK) {
3465 fsp->m_u.tcp_ip6_spec.ip6dst[0] = htonl(0xFFFFFFFF);
3466 fsp->m_u.tcp_ip6_spec.ip6dst[1] = htonl(0xFFFFFFFF);
3467 fsp->m_u.tcp_ip6_spec.ip6dst[2] = htonl(0xFFFFFFFF);
3468 fsp->m_u.tcp_ip6_spec.ip6dst[3] = htonl(0xFFFFFFFF);
3471 if (input_set & I40E_L3_SRC_MASK)
3472 fsp->m_u.tcp_ip4_spec.ip4src = htonl(0xFFFFFFFF);
3474 if (input_set & I40E_L3_DST_MASK)
3475 fsp->m_u.tcp_ip4_spec.ip4dst = htonl(0xFFFFFFFF);
3477 if (input_set & I40E_L4_SRC_MASK)
3478 fsp->m_u.tcp_ip4_spec.psrc = htons(0xFFFF);
3480 if (input_set & I40E_L4_DST_MASK)
3481 fsp->m_u.tcp_ip4_spec.pdst = htons(0xFFFF);
3483 if (rule->dest_ctl == I40E_FILTER_PROGRAM_DESC_DEST_DROP_PACKET)
3484 fsp->ring_cookie = RX_CLS_FLOW_DISC;
3486 fsp->ring_cookie = rule->q_index;
3488 if (rule->vlan_tag) {
3489 fsp->h_ext.vlan_etype = rule->vlan_etype;
3490 fsp->m_ext.vlan_etype = htons(0xFFFF);
3491 fsp->h_ext.vlan_tci = rule->vlan_tag;
3492 fsp->m_ext.vlan_tci = htons(0xFFFF);
3493 fsp->flow_type |= FLOW_EXT;
3496 if (rule->dest_vsi != pf->vsi[pf->lan_vsi]->id) {
3497 struct i40e_vsi *vsi;
3499 vsi = i40e_find_vsi_from_id(pf, rule->dest_vsi);
3500 if (vsi && vsi->type == I40E_VSI_SRIOV) {
3501 /* VFs are zero-indexed by the driver, but ethtool
3502 * expects them to be one-indexed, so add one here
3504 u64 ring_vf = vsi->vf_id + 1;
3506 ring_vf <<= ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF;
3507 fsp->ring_cookie |= ring_vf;
3511 if (rule->flex_filter) {
3512 userdef.flex_filter = true;
3513 userdef.flex_word = be16_to_cpu(rule->flex_word);
3514 userdef.flex_offset = rule->flex_offset;
3517 i40e_fill_rx_flow_user_data(fsp, &userdef);
3523 * i40e_get_rxnfc - command to get RX flow classification rules
3524 * @netdev: network interface device structure
3525 * @cmd: ethtool rxnfc command
3526 * @rule_locs: pointer to store rule data
3528 * Returns Success if the command is supported.
3530 static int i40e_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
3533 struct i40e_netdev_priv *np = netdev_priv(netdev);
3534 struct i40e_vsi *vsi = np->vsi;
3535 struct i40e_pf *pf = vsi->back;
3536 int ret = -EOPNOTSUPP;
3539 case ETHTOOL_GRXRINGS:
3540 cmd->data = vsi->rss_size;
3544 ret = i40e_get_rss_hash_opts(pf, cmd);
3546 case ETHTOOL_GRXCLSRLCNT:
3547 cmd->rule_cnt = pf->fdir_pf_active_filters;
3548 /* report total rule count */
3549 cmd->data = i40e_get_fd_cnt_all(pf);
3552 case ETHTOOL_GRXCLSRULE:
3553 ret = i40e_get_ethtool_fdir_entry(pf, cmd);
3555 case ETHTOOL_GRXCLSRLALL:
3556 ret = i40e_get_ethtool_fdir_all(pf, cmd, rule_locs);
3566 * i40e_get_rss_hash_bits - Read RSS Hash bits from register
3568 * @nfc: pointer to user request
3569 * @i_setc: bits currently set
3571 * Returns value of bits to be set per user request
3573 static u64 i40e_get_rss_hash_bits(struct i40e_hw *hw,
3574 struct ethtool_rxnfc *nfc,
3578 u64 src_l3 = 0, dst_l3 = 0;
3580 if (nfc->data & RXH_L4_B_0_1)
3581 i_set |= I40E_L4_SRC_MASK;
3583 i_set &= ~I40E_L4_SRC_MASK;
3584 if (nfc->data & RXH_L4_B_2_3)
3585 i_set |= I40E_L4_DST_MASK;
3587 i_set &= ~I40E_L4_DST_MASK;
3589 if (nfc->flow_type == TCP_V6_FLOW || nfc->flow_type == UDP_V6_FLOW) {
3590 src_l3 = I40E_L3_V6_SRC_MASK;
3591 dst_l3 = I40E_L3_V6_DST_MASK;
3592 } else if (nfc->flow_type == TCP_V4_FLOW ||
3593 nfc->flow_type == UDP_V4_FLOW) {
3594 if (hw->mac.type == I40E_MAC_X722) {
3595 src_l3 = I40E_X722_L3_SRC_MASK;
3596 dst_l3 = I40E_X722_L3_DST_MASK;
3598 src_l3 = I40E_L3_SRC_MASK;
3599 dst_l3 = I40E_L3_DST_MASK;
3602 /* Any other flow type are not supported here */
3606 if (nfc->data & RXH_IP_SRC)
3610 if (nfc->data & RXH_IP_DST)
3618 #define FLOW_PCTYPES_SIZE 64
3620 * i40e_set_rss_hash_opt - Enable/Disable flow types for RSS hash
3621 * @pf: pointer to the physical function struct
3622 * @nfc: ethtool rxnfc command
3624 * Returns Success if the flow input set is supported.
3626 static int i40e_set_rss_hash_opt(struct i40e_pf *pf, struct ethtool_rxnfc *nfc)
3628 struct i40e_hw *hw = &pf->hw;
3629 u64 hena = (u64)i40e_read_rx_ctl(hw, I40E_PFQF_HENA(0)) |
3630 ((u64)i40e_read_rx_ctl(hw, I40E_PFQF_HENA(1)) << 32);
3631 DECLARE_BITMAP(flow_pctypes, FLOW_PCTYPES_SIZE);
3634 bitmap_zero(flow_pctypes, FLOW_PCTYPES_SIZE);
3636 if (test_bit(I40E_FLAG_MFP_ENA, pf->flags)) {
3637 dev_err(&pf->pdev->dev,
3638 "Change of RSS hash input set is not supported when MFP mode is enabled\n");
3642 /* RSS does not support anything other than hashing
3643 * to queues on src and dst IPs and ports
3645 if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST |
3646 RXH_L4_B_0_1 | RXH_L4_B_2_3))
3649 switch (nfc->flow_type) {
3651 set_bit(I40E_FILTER_PCTYPE_NONF_IPV4_TCP, flow_pctypes);
3652 if (test_bit(I40E_HW_CAP_MULTI_TCP_UDP_RSS_PCTYPE,
3654 set_bit(I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN_NO_ACK,
3658 set_bit(I40E_FILTER_PCTYPE_NONF_IPV6_TCP, flow_pctypes);
3659 if (test_bit(I40E_HW_CAP_MULTI_TCP_UDP_RSS_PCTYPE,
3661 set_bit(I40E_FILTER_PCTYPE_NONF_IPV6_TCP_SYN_NO_ACK,
3665 set_bit(I40E_FILTER_PCTYPE_NONF_IPV4_UDP, flow_pctypes);
3666 if (test_bit(I40E_HW_CAP_MULTI_TCP_UDP_RSS_PCTYPE,
3668 set_bit(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP,
3670 set_bit(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV4_UDP,
3673 hena |= BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV4);
3676 set_bit(I40E_FILTER_PCTYPE_NONF_IPV6_UDP, flow_pctypes);
3677 if (test_bit(I40E_HW_CAP_MULTI_TCP_UDP_RSS_PCTYPE,
3679 set_bit(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV6_UDP,
3681 set_bit(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV6_UDP,
3684 hena |= BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV6);
3686 case AH_ESP_V4_FLOW:
3690 if ((nfc->data & RXH_L4_B_0_1) ||
3691 (nfc->data & RXH_L4_B_2_3))
3693 hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_OTHER);
3695 case AH_ESP_V6_FLOW:
3699 if ((nfc->data & RXH_L4_B_0_1) ||
3700 (nfc->data & RXH_L4_B_2_3))
3702 hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_OTHER);
3705 hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_OTHER) |
3706 BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV4);
3709 hena |= BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_OTHER) |
3710 BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV6);
3716 if (bitmap_weight(flow_pctypes, FLOW_PCTYPES_SIZE)) {
3719 for_each_set_bit(flow_id, flow_pctypes, FLOW_PCTYPES_SIZE) {
3720 i_setc = (u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(0, flow_id)) |
3721 ((u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(1, flow_id)) << 32);
3722 i_set = i40e_get_rss_hash_bits(&pf->hw, nfc, i_setc);
3724 i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(0, flow_id),
3726 i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(1, flow_id),
3727 (u32)(i_set >> 32));
3728 hena |= BIT_ULL(flow_id);
3732 i40e_write_rx_ctl(hw, I40E_PFQF_HENA(0), (u32)hena);
3733 i40e_write_rx_ctl(hw, I40E_PFQF_HENA(1), (u32)(hena >> 32));
3740 * i40e_update_ethtool_fdir_entry - Updates the fdir filter entry
3741 * @vsi: Pointer to the targeted VSI
3742 * @input: The filter to update or NULL to indicate deletion
3743 * @sw_idx: Software index to the filter
3744 * @cmd: The command to get or set Rx flow classification rules
3746 * This function updates (or deletes) a Flow Director entry from
3747 * the hlist of the corresponding PF
3749 * Returns 0 on success
3751 static int i40e_update_ethtool_fdir_entry(struct i40e_vsi *vsi,
3752 struct i40e_fdir_filter *input,
3754 struct ethtool_rxnfc *cmd)
3756 struct i40e_fdir_filter *rule, *parent;
3757 struct i40e_pf *pf = vsi->back;
3758 struct hlist_node *node2;
3764 hlist_for_each_entry_safe(rule, node2,
3765 &pf->fdir_filter_list, fdir_node) {
3766 /* hash found, or no matching entry */
3767 if (rule->fd_id >= sw_idx)
3772 /* if there is an old rule occupying our place remove it */
3773 if (rule && (rule->fd_id == sw_idx)) {
3774 /* Remove this rule, since we're either deleting it, or
3777 err = i40e_add_del_fdir(vsi, rule, false);
3778 hlist_del(&rule->fdir_node);
3780 pf->fdir_pf_active_filters--;
3783 /* If we weren't given an input, this is a delete, so just return the
3784 * error code indicating if there was an entry at the requested slot
3789 /* Otherwise, install the new rule as requested */
3790 INIT_HLIST_NODE(&input->fdir_node);
3792 /* add filter to the list */
3794 hlist_add_behind(&input->fdir_node, &parent->fdir_node);
3796 hlist_add_head(&input->fdir_node,
3797 &pf->fdir_filter_list);
3800 pf->fdir_pf_active_filters++;
3806 * i40e_prune_flex_pit_list - Cleanup unused entries in FLX_PIT table
3807 * @pf: pointer to PF structure
3809 * This function searches the list of filters and determines which FLX_PIT
3810 * entries are still required. It will prune any entries which are no longer
3811 * in use after the deletion.
3813 static void i40e_prune_flex_pit_list(struct i40e_pf *pf)
3815 struct i40e_flex_pit *entry, *tmp;
3816 struct i40e_fdir_filter *rule;
3818 /* First, we'll check the l3 table */
3819 list_for_each_entry_safe(entry, tmp, &pf->l3_flex_pit_list, list) {
3822 hlist_for_each_entry(rule, &pf->fdir_filter_list, fdir_node) {
3823 if (rule->flow_type != IP_USER_FLOW)
3825 if (rule->flex_filter &&
3826 rule->flex_offset == entry->src_offset) {
3832 /* If we didn't find the filter, then we can prune this entry
3836 list_del(&entry->list);
3841 /* Followed by the L4 table */
3842 list_for_each_entry_safe(entry, tmp, &pf->l4_flex_pit_list, list) {
3845 hlist_for_each_entry(rule, &pf->fdir_filter_list, fdir_node) {
3846 /* Skip this filter if it's L3, since we already
3847 * checked those in the above loop
3849 if (rule->flow_type == IP_USER_FLOW)
3851 if (rule->flex_filter &&
3852 rule->flex_offset == entry->src_offset) {
3858 /* If we didn't find the filter, then we can prune this entry
3862 list_del(&entry->list);
3869 * i40e_del_fdir_entry - Deletes a Flow Director filter entry
3870 * @vsi: Pointer to the targeted VSI
3871 * @cmd: The command to get or set Rx flow classification rules
3873 * The function removes a Flow Director filter entry from the
3874 * hlist of the corresponding PF
3876 * Returns 0 on success
3878 static int i40e_del_fdir_entry(struct i40e_vsi *vsi,
3879 struct ethtool_rxnfc *cmd)
3881 struct ethtool_rx_flow_spec *fsp =
3882 (struct ethtool_rx_flow_spec *)&cmd->fs;
3883 struct i40e_pf *pf = vsi->back;
3886 if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
3887 test_bit(__I40E_RESET_INTR_RECEIVED, pf->state))
3890 if (test_bit(__I40E_FD_FLUSH_REQUESTED, pf->state))
3893 ret = i40e_update_ethtool_fdir_entry(vsi, NULL, fsp->location, cmd);
3895 i40e_prune_flex_pit_list(pf);
3897 i40e_fdir_check_and_reenable(pf);
3902 * i40e_unused_pit_index - Find an unused PIT index for given list
3903 * @pf: the PF data structure
3905 * Find the first unused flexible PIT index entry. We search both the L3 and
3906 * L4 flexible PIT lists so that the returned index is unique and unused by
3907 * either currently programmed L3 or L4 filters. We use a bit field as storage
3908 * to track which indexes are already used.
3910 static u8 i40e_unused_pit_index(struct i40e_pf *pf)
3912 unsigned long available_index = 0xFF;
3913 struct i40e_flex_pit *entry;
3915 /* We need to make sure that the new index isn't in use by either L3
3916 * or L4 filters so that IP_USER_FLOW filters can program both L3 and
3917 * L4 to use the same index.
3920 list_for_each_entry(entry, &pf->l4_flex_pit_list, list)
3921 clear_bit(entry->pit_index, &available_index);
3923 list_for_each_entry(entry, &pf->l3_flex_pit_list, list)
3924 clear_bit(entry->pit_index, &available_index);
3926 return find_first_bit(&available_index, 8);
3930 * i40e_find_flex_offset - Find an existing flex src_offset
3931 * @flex_pit_list: L3 or L4 flex PIT list
3932 * @src_offset: new src_offset to find
3934 * Searches the flex_pit_list for an existing offset. If no offset is
3935 * currently programmed, then this will return an ERR_PTR if there is no space
3936 * to add a new offset, otherwise it returns NULL.
3939 struct i40e_flex_pit *i40e_find_flex_offset(struct list_head *flex_pit_list,
3942 struct i40e_flex_pit *entry;
3945 /* Search for the src_offset first. If we find a matching entry
3946 * already programmed, we can simply re-use it.
3948 list_for_each_entry(entry, flex_pit_list, list) {
3950 if (entry->src_offset == src_offset)
3954 /* If we haven't found an entry yet, then the provided src offset has
3955 * not yet been programmed. We will program the src offset later on,
3956 * but we need to indicate whether there is enough space to do so
3957 * here. We'll make use of ERR_PTR for this purpose.
3959 if (size >= I40E_FLEX_PIT_TABLE_SIZE)
3960 return ERR_PTR(-ENOSPC);
3966 * i40e_add_flex_offset - Add src_offset to flex PIT table list
3967 * @flex_pit_list: L3 or L4 flex PIT list
3968 * @src_offset: new src_offset to add
3969 * @pit_index: the PIT index to program
3971 * This function programs the new src_offset to the list. It is expected that
3972 * i40e_find_flex_offset has already been tried and returned NULL, indicating
3973 * that this offset is not programmed, and that the list has enough space to
3974 * store another offset.
3976 * Returns 0 on success, and negative value on error.
3978 static int i40e_add_flex_offset(struct list_head *flex_pit_list,
3982 struct i40e_flex_pit *new_pit, *entry;
3984 new_pit = kzalloc(sizeof(*entry), GFP_KERNEL);
3988 new_pit->src_offset = src_offset;
3989 new_pit->pit_index = pit_index;
3991 /* We need to insert this item such that the list is sorted by
3992 * src_offset in ascending order.
3994 list_for_each_entry(entry, flex_pit_list, list) {
3995 if (new_pit->src_offset < entry->src_offset) {
3996 list_add_tail(&new_pit->list, &entry->list);
4000 /* If we found an entry with our offset already programmed we
4001 * can simply return here, after freeing the memory. However,
4002 * if the pit_index does not match we need to report an error.
4004 if (new_pit->src_offset == entry->src_offset) {
4007 /* If the PIT index is not the same we can't re-use
4008 * the entry, so we must report an error.
4010 if (new_pit->pit_index != entry->pit_index)
4018 /* If we reached here, then we haven't yet added the item. This means
4019 * that we should add the item at the end of the list.
4021 list_add_tail(&new_pit->list, flex_pit_list);
4026 * __i40e_reprogram_flex_pit - Re-program specific FLX_PIT table
4027 * @pf: Pointer to the PF structure
4028 * @flex_pit_list: list of flexible src offsets in use
4029 * @flex_pit_start: index to first entry for this section of the table
4031 * In order to handle flexible data, the hardware uses a table of values
4032 * called the FLX_PIT table. This table is used to indicate which sections of
4033 * the input correspond to what PIT index values. Unfortunately, hardware is
4034 * very restrictive about programming this table. Entries must be ordered by
4035 * src_offset in ascending order, without duplicates. Additionally, unused
4036 * entries must be set to the unused index value, and must have valid size and
4037 * length according to the src_offset ordering.
4039 * This function will reprogram the FLX_PIT register from a book-keeping
4040 * structure that we guarantee is already ordered correctly, and has no more
4043 * To make things easier, we only support flexible values of one word length,
4044 * rather than allowing variable length flexible values.
4046 static void __i40e_reprogram_flex_pit(struct i40e_pf *pf,
4047 struct list_head *flex_pit_list,
4050 struct i40e_flex_pit *entry = NULL;
4051 u16 last_offset = 0;
4054 /* First, loop over the list of flex PIT entries, and reprogram the
4057 list_for_each_entry(entry, flex_pit_list, list) {
4058 /* We have to be careful when programming values for the
4059 * largest SRC_OFFSET value. It is possible that adding
4060 * additional empty values at the end would overflow the space
4061 * for the SRC_OFFSET in the FLX_PIT register. To avoid this,
4062 * we check here and add the empty values prior to adding the
4065 * To determine this, we will use a loop from i+1 to 3, which
4066 * will determine whether the unused entries would have valid
4067 * SRC_OFFSET. Note that there cannot be extra entries past
4068 * this value, because the only valid values would have been
4069 * larger than I40E_MAX_FLEX_SRC_OFFSET, and thus would not
4070 * have been added to the list in the first place.
4072 for (j = i + 1; j < 3; j++) {
4073 u16 offset = entry->src_offset + j;
4074 int index = flex_pit_start + i;
4075 u32 value = I40E_FLEX_PREP_VAL(I40E_FLEX_DEST_UNUSED,
4079 if (offset > I40E_MAX_FLEX_SRC_OFFSET) {
4080 i40e_write_rx_ctl(&pf->hw,
4081 I40E_PRTQF_FLX_PIT(index),
4087 /* Now, we can program the actual value into the table */
4088 i40e_write_rx_ctl(&pf->hw,
4089 I40E_PRTQF_FLX_PIT(flex_pit_start + i),
4090 I40E_FLEX_PREP_VAL(entry->pit_index + 50,
4092 entry->src_offset));
4096 /* In order to program the last entries in the table, we need to
4097 * determine the valid offset. If the list is empty, we'll just start
4098 * with 0. Otherwise, we'll start with the last item offset and add 1.
4099 * This ensures that all entries have valid sizes. If we don't do this
4100 * correctly, the hardware will disable flexible field parsing.
4102 if (!list_empty(flex_pit_list))
4103 last_offset = list_prev_entry(entry, list)->src_offset + 1;
4105 for (; i < 3; i++, last_offset++) {
4106 i40e_write_rx_ctl(&pf->hw,
4107 I40E_PRTQF_FLX_PIT(flex_pit_start + i),
4108 I40E_FLEX_PREP_VAL(I40E_FLEX_DEST_UNUSED,
4115 * i40e_reprogram_flex_pit - Reprogram all FLX_PIT tables after input set change
4116 * @pf: pointer to the PF structure
4118 * This function reprograms both the L3 and L4 FLX_PIT tables. See the
4119 * internal helper function for implementation details.
4121 static void i40e_reprogram_flex_pit(struct i40e_pf *pf)
4123 __i40e_reprogram_flex_pit(pf, &pf->l3_flex_pit_list,
4124 I40E_FLEX_PIT_IDX_START_L3);
4126 __i40e_reprogram_flex_pit(pf, &pf->l4_flex_pit_list,
4127 I40E_FLEX_PIT_IDX_START_L4);
4129 /* We also need to program the L3 and L4 GLQF ORT register */
4130 i40e_write_rx_ctl(&pf->hw,
4131 I40E_GLQF_ORT(I40E_L3_GLQF_ORT_IDX),
4132 I40E_ORT_PREP_VAL(I40E_FLEX_PIT_IDX_START_L3,
4135 i40e_write_rx_ctl(&pf->hw,
4136 I40E_GLQF_ORT(I40E_L4_GLQF_ORT_IDX),
4137 I40E_ORT_PREP_VAL(I40E_FLEX_PIT_IDX_START_L4,
4142 * i40e_flow_str - Converts a flow_type into a human readable string
4143 * @fsp: the flow specification
4145 * Currently only flow types we support are included here, and the string
4146 * value attempts to match what ethtool would use to configure this flow type.
4148 static const char *i40e_flow_str(struct ethtool_rx_flow_spec *fsp)
4150 switch (fsp->flow_type & ~FLOW_EXT) {
4165 case IPV6_USER_FLOW:
4173 * i40e_pit_index_to_mask - Return the FLEX mask for a given PIT index
4174 * @pit_index: PIT index to convert
4176 * Returns the mask for a given PIT index. Will return 0 if the pit_index is
4179 static u64 i40e_pit_index_to_mask(int pit_index)
4181 switch (pit_index) {
4183 return I40E_FLEX_50_MASK;
4185 return I40E_FLEX_51_MASK;
4187 return I40E_FLEX_52_MASK;
4189 return I40E_FLEX_53_MASK;
4191 return I40E_FLEX_54_MASK;
4193 return I40E_FLEX_55_MASK;
4195 return I40E_FLEX_56_MASK;
4197 return I40E_FLEX_57_MASK;
4204 * i40e_print_input_set - Show changes between two input sets
4205 * @vsi: the vsi being configured
4206 * @old: the old input set
4207 * @new: the new input set
4209 * Print the difference between old and new input sets by showing which series
4210 * of words are toggled on or off. Only displays the bits we actually support
4213 static void i40e_print_input_set(struct i40e_vsi *vsi, u64 old, u64 new)
4215 struct i40e_pf *pf = vsi->back;
4216 bool old_value, new_value;
4219 old_value = !!(old & I40E_L3_SRC_MASK);
4220 new_value = !!(new & I40E_L3_SRC_MASK);
4221 if (old_value != new_value)
4222 netif_info(pf, drv, vsi->netdev, "L3 source address: %s -> %s\n",
4223 old_value ? "ON" : "OFF",
4224 new_value ? "ON" : "OFF");
4226 old_value = !!(old & I40E_L3_DST_MASK);
4227 new_value = !!(new & I40E_L3_DST_MASK);
4228 if (old_value != new_value)
4229 netif_info(pf, drv, vsi->netdev, "L3 destination address: %s -> %s\n",
4230 old_value ? "ON" : "OFF",
4231 new_value ? "ON" : "OFF");
4233 old_value = !!(old & I40E_L4_SRC_MASK);
4234 new_value = !!(new & I40E_L4_SRC_MASK);
4235 if (old_value != new_value)
4236 netif_info(pf, drv, vsi->netdev, "L4 source port: %s -> %s\n",
4237 old_value ? "ON" : "OFF",
4238 new_value ? "ON" : "OFF");
4240 old_value = !!(old & I40E_L4_DST_MASK);
4241 new_value = !!(new & I40E_L4_DST_MASK);
4242 if (old_value != new_value)
4243 netif_info(pf, drv, vsi->netdev, "L4 destination port: %s -> %s\n",
4244 old_value ? "ON" : "OFF",
4245 new_value ? "ON" : "OFF");
4247 old_value = !!(old & I40E_VERIFY_TAG_MASK);
4248 new_value = !!(new & I40E_VERIFY_TAG_MASK);
4249 if (old_value != new_value)
4250 netif_info(pf, drv, vsi->netdev, "SCTP verification tag: %s -> %s\n",
4251 old_value ? "ON" : "OFF",
4252 new_value ? "ON" : "OFF");
4254 /* Show change of flexible filter entries */
4255 for (i = 0; i < I40E_FLEX_INDEX_ENTRIES; i++) {
4256 u64 flex_mask = i40e_pit_index_to_mask(i);
4258 old_value = !!(old & flex_mask);
4259 new_value = !!(new & flex_mask);
4260 if (old_value != new_value)
4261 netif_info(pf, drv, vsi->netdev, "FLEX index %d: %s -> %s\n",
4263 old_value ? "ON" : "OFF",
4264 new_value ? "ON" : "OFF");
4267 netif_info(pf, drv, vsi->netdev, " Current input set: %0llx\n",
4269 netif_info(pf, drv, vsi->netdev, "Requested input set: %0llx\n",
4274 * i40e_check_fdir_input_set - Check that a given rx_flow_spec mask is valid
4275 * @vsi: pointer to the targeted VSI
4276 * @fsp: pointer to Rx flow specification
4277 * @userdef: userdefined data from flow specification
4279 * Ensures that a given ethtool_rx_flow_spec has a valid mask. Some support
4280 * for partial matches exists with a few limitations. First, hardware only
4281 * supports masking by word boundary (2 bytes) and not per individual bit.
4282 * Second, hardware is limited to using one mask for a flow type and cannot
4283 * use a separate mask for each filter.
4285 * To support these limitations, if we already have a configured filter for
4286 * the specified type, this function enforces that new filters of the type
4287 * match the configured input set. Otherwise, if we do not have a filter of
4288 * the specified type, we allow the input set to be updated to match the
4291 * To help ensure that administrators understand why filters weren't displayed
4292 * as supported, we print a diagnostic message displaying how the input set
4293 * would change and warning to delete the preexisting filters if required.
4295 * Returns 0 on successful input set match, and a negative return code on
4298 static int i40e_check_fdir_input_set(struct i40e_vsi *vsi,
4299 struct ethtool_rx_flow_spec *fsp,
4300 struct i40e_rx_flow_userdef *userdef)
4302 static const __be32 ipv6_full_mask[4] = {cpu_to_be32(0xffffffff),
4303 cpu_to_be32(0xffffffff), cpu_to_be32(0xffffffff),
4304 cpu_to_be32(0xffffffff)};
4305 struct ethtool_tcpip6_spec *tcp_ip6_spec;
4306 struct ethtool_usrip6_spec *usr_ip6_spec;
4307 struct ethtool_tcpip4_spec *tcp_ip4_spec;
4308 struct ethtool_usrip4_spec *usr_ip4_spec;
4309 struct i40e_pf *pf = vsi->back;
4310 u64 current_mask, new_mask;
4311 bool new_flex_offset = false;
4312 bool flex_l3 = false;
4313 u16 *fdir_filter_count;
4314 u16 index, src_offset = 0;
4318 switch (fsp->flow_type & ~FLOW_EXT) {
4320 index = I40E_FILTER_PCTYPE_NONF_IPV4_SCTP;
4321 fdir_filter_count = &pf->fd_sctp4_filter_cnt;
4324 index = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
4325 fdir_filter_count = &pf->fd_tcp4_filter_cnt;
4328 index = I40E_FILTER_PCTYPE_NONF_IPV4_UDP;
4329 fdir_filter_count = &pf->fd_udp4_filter_cnt;
4332 index = I40E_FILTER_PCTYPE_NONF_IPV6_SCTP;
4333 fdir_filter_count = &pf->fd_sctp6_filter_cnt;
4336 index = I40E_FILTER_PCTYPE_NONF_IPV6_TCP;
4337 fdir_filter_count = &pf->fd_tcp6_filter_cnt;
4340 index = I40E_FILTER_PCTYPE_NONF_IPV6_UDP;
4341 fdir_filter_count = &pf->fd_udp6_filter_cnt;
4344 index = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER;
4345 fdir_filter_count = &pf->fd_ip4_filter_cnt;
4348 case IPV6_USER_FLOW:
4349 index = I40E_FILTER_PCTYPE_NONF_IPV6_OTHER;
4350 fdir_filter_count = &pf->fd_ip6_filter_cnt;
4357 /* Read the current input set from register memory. */
4358 current_mask = i40e_read_fd_input_set(pf, index);
4359 new_mask = current_mask;
4361 /* Determine, if any, the required changes to the input set in order
4362 * to support the provided mask.
4364 * Hardware only supports masking at word (2 byte) granularity and does
4365 * not support full bitwise masking. This implementation simplifies
4366 * even further and only supports fully enabled or fully disabled
4367 * masks for each field, even though we could split the ip4src and
4370 switch (fsp->flow_type & ~FLOW_EXT) {
4372 new_mask &= ~I40E_VERIFY_TAG_MASK;
4376 tcp_ip4_spec = &fsp->m_u.tcp_ip4_spec;
4378 /* IPv4 source address */
4379 if (tcp_ip4_spec->ip4src == htonl(0xFFFFFFFF))
4380 new_mask |= I40E_L3_SRC_MASK;
4381 else if (!tcp_ip4_spec->ip4src)
4382 new_mask &= ~I40E_L3_SRC_MASK;
4386 /* IPv4 destination address */
4387 if (tcp_ip4_spec->ip4dst == htonl(0xFFFFFFFF))
4388 new_mask |= I40E_L3_DST_MASK;
4389 else if (!tcp_ip4_spec->ip4dst)
4390 new_mask &= ~I40E_L3_DST_MASK;
4394 /* L4 source port */
4395 if (tcp_ip4_spec->psrc == htons(0xFFFF))
4396 new_mask |= I40E_L4_SRC_MASK;
4397 else if (!tcp_ip4_spec->psrc)
4398 new_mask &= ~I40E_L4_SRC_MASK;
4402 /* L4 destination port */
4403 if (tcp_ip4_spec->pdst == htons(0xFFFF))
4404 new_mask |= I40E_L4_DST_MASK;
4405 else if (!tcp_ip4_spec->pdst)
4406 new_mask &= ~I40E_L4_DST_MASK;
4410 /* Filtering on Type of Service is not supported. */
4411 if (tcp_ip4_spec->tos)
4416 new_mask &= ~I40E_VERIFY_TAG_MASK;
4420 tcp_ip6_spec = &fsp->m_u.tcp_ip6_spec;
4422 /* Check if user provided IPv6 source address. */
4423 if (ipv6_addr_equal((struct in6_addr *)&tcp_ip6_spec->ip6src,
4424 (struct in6_addr *)&ipv6_full_mask))
4425 new_mask |= I40E_L3_V6_SRC_MASK;
4426 else if (ipv6_addr_any((struct in6_addr *)
4427 &tcp_ip6_spec->ip6src))
4428 new_mask &= ~I40E_L3_V6_SRC_MASK;
4432 /* Check if user provided destination address. */
4433 if (ipv6_addr_equal((struct in6_addr *)&tcp_ip6_spec->ip6dst,
4434 (struct in6_addr *)&ipv6_full_mask))
4435 new_mask |= I40E_L3_V6_DST_MASK;
4436 else if (ipv6_addr_any((struct in6_addr *)
4437 &tcp_ip6_spec->ip6dst))
4438 new_mask &= ~I40E_L3_V6_DST_MASK;
4442 /* L4 source port */
4443 if (tcp_ip6_spec->psrc == htons(0xFFFF))
4444 new_mask |= I40E_L4_SRC_MASK;
4445 else if (!tcp_ip6_spec->psrc)
4446 new_mask &= ~I40E_L4_SRC_MASK;
4450 /* L4 destination port */
4451 if (tcp_ip6_spec->pdst == htons(0xFFFF))
4452 new_mask |= I40E_L4_DST_MASK;
4453 else if (!tcp_ip6_spec->pdst)
4454 new_mask &= ~I40E_L4_DST_MASK;
4458 /* Filtering on Traffic Classes is not supported. */
4459 if (tcp_ip6_spec->tclass)
4463 usr_ip4_spec = &fsp->m_u.usr_ip4_spec;
4465 /* IPv4 source address */
4466 if (usr_ip4_spec->ip4src == htonl(0xFFFFFFFF))
4467 new_mask |= I40E_L3_SRC_MASK;
4468 else if (!usr_ip4_spec->ip4src)
4469 new_mask &= ~I40E_L3_SRC_MASK;
4473 /* IPv4 destination address */
4474 if (usr_ip4_spec->ip4dst == htonl(0xFFFFFFFF))
4475 new_mask |= I40E_L3_DST_MASK;
4476 else if (!usr_ip4_spec->ip4dst)
4477 new_mask &= ~I40E_L3_DST_MASK;
4481 /* First 4 bytes of L4 header */
4482 if (usr_ip4_spec->l4_4_bytes)
4485 /* Filtering on Type of Service is not supported. */
4486 if (usr_ip4_spec->tos)
4489 /* Filtering on IP version is not supported */
4490 if (usr_ip4_spec->ip_ver)
4493 /* Filtering on L4 protocol is not supported */
4494 if (usr_ip4_spec->proto)
4498 case IPV6_USER_FLOW:
4499 usr_ip6_spec = &fsp->m_u.usr_ip6_spec;
4501 /* Check if user provided IPv6 source address. */
4502 if (ipv6_addr_equal((struct in6_addr *)&usr_ip6_spec->ip6src,
4503 (struct in6_addr *)&ipv6_full_mask))
4504 new_mask |= I40E_L3_V6_SRC_MASK;
4505 else if (ipv6_addr_any((struct in6_addr *)
4506 &usr_ip6_spec->ip6src))
4507 new_mask &= ~I40E_L3_V6_SRC_MASK;
4511 /* Check if user provided destination address. */
4512 if (ipv6_addr_equal((struct in6_addr *)&usr_ip6_spec->ip6dst,
4513 (struct in6_addr *)&ipv6_full_mask))
4514 new_mask |= I40E_L3_V6_DST_MASK;
4515 else if (ipv6_addr_any((struct in6_addr *)
4516 &usr_ip6_spec->ip6dst))
4517 new_mask &= ~I40E_L3_V6_DST_MASK;
4521 if (usr_ip6_spec->l4_4_bytes)
4524 /* Filtering on Traffic class is not supported. */
4525 if (usr_ip6_spec->tclass)
4528 /* Filtering on L4 protocol is not supported */
4529 if (usr_ip6_spec->l4_proto)
4537 if (fsp->flow_type & FLOW_EXT) {
4538 /* Allow only 802.1Q and no etype defined, as
4539 * later it's modified to 0x8100
4541 if (fsp->h_ext.vlan_etype != htons(ETH_P_8021Q) &&
4542 fsp->h_ext.vlan_etype != 0)
4544 if (fsp->m_ext.vlan_tci == htons(0xFFFF))
4545 new_mask |= I40E_VLAN_SRC_MASK;
4547 new_mask &= ~I40E_VLAN_SRC_MASK;
4550 /* First, clear all flexible filter entries */
4551 new_mask &= ~I40E_FLEX_INPUT_MASK;
4553 /* If we have a flexible filter, try to add this offset to the correct
4554 * flexible filter PIT list. Once finished, we can update the mask.
4555 * If the src_offset changed, we will get a new mask value which will
4556 * trigger an input set change.
4558 if (userdef->flex_filter) {
4559 struct i40e_flex_pit *l3_flex_pit = NULL, *flex_pit = NULL;
4561 /* Flexible offset must be even, since the flexible payload
4562 * must be aligned on 2-byte boundary.
4564 if (userdef->flex_offset & 0x1) {
4565 dev_warn(&pf->pdev->dev,
4566 "Flexible data offset must be 2-byte aligned\n");
4570 src_offset = userdef->flex_offset >> 1;
4572 /* FLX_PIT source offset value is only so large */
4573 if (src_offset > I40E_MAX_FLEX_SRC_OFFSET) {
4574 dev_warn(&pf->pdev->dev,
4575 "Flexible data must reside within first 64 bytes of the packet payload\n");
4579 /* See if this offset has already been programmed. If we get
4580 * an ERR_PTR, then the filter is not safe to add. Otherwise,
4581 * if we get a NULL pointer, this means we will need to add
4584 flex_pit = i40e_find_flex_offset(&pf->l4_flex_pit_list,
4586 if (IS_ERR(flex_pit))
4587 return PTR_ERR(flex_pit);
4589 /* IP_USER_FLOW filters match both L4 (ICMP) and L3 (unknown)
4590 * packet types, and thus we need to program both L3 and L4
4591 * flexible values. These must have identical flexible index,
4592 * as otherwise we can't correctly program the input set. So
4593 * we'll find both an L3 and L4 index and make sure they are
4598 i40e_find_flex_offset(&pf->l3_flex_pit_list,
4600 if (IS_ERR(l3_flex_pit))
4601 return PTR_ERR(l3_flex_pit);
4604 /* If we already had a matching L4 entry, we
4605 * need to make sure that the L3 entry we
4606 * obtained uses the same index.
4609 if (l3_flex_pit->pit_index !=
4610 flex_pit->pit_index) {
4614 new_flex_offset = true;
4617 flex_pit = l3_flex_pit;
4621 /* If we didn't find an existing flex offset, we need to
4622 * program a new one. However, we don't immediately program it
4623 * here because we will wait to program until after we check
4624 * that it is safe to change the input set.
4627 new_flex_offset = true;
4628 pit_index = i40e_unused_pit_index(pf);
4630 pit_index = flex_pit->pit_index;
4633 /* Update the mask with the new offset */
4634 new_mask |= i40e_pit_index_to_mask(pit_index);
4637 /* If the mask and flexible filter offsets for this filter match the
4638 * currently programmed values we don't need any input set change, so
4639 * this filter is safe to install.
4641 if (new_mask == current_mask && !new_flex_offset)
4644 netif_info(pf, drv, vsi->netdev, "Input set change requested for %s flows:\n",
4645 i40e_flow_str(fsp));
4646 i40e_print_input_set(vsi, current_mask, new_mask);
4647 if (new_flex_offset) {
4648 netif_info(pf, drv, vsi->netdev, "FLEX index %d: Offset -> %d",
4649 pit_index, src_offset);
4652 /* Hardware input sets are global across multiple ports, so even the
4653 * main port cannot change them when in MFP mode as this would impact
4654 * any filters on the other ports.
4656 if (test_bit(I40E_FLAG_MFP_ENA, pf->flags)) {
4657 netif_err(pf, drv, vsi->netdev, "Cannot change Flow Director input sets while MFP is enabled\n");
4661 /* This filter requires us to update the input set. However, hardware
4662 * only supports one input set per flow type, and does not support
4663 * separate masks for each filter. This means that we can only support
4664 * a single mask for all filters of a specific type.
4666 * If we have preexisting filters, they obviously depend on the
4667 * current programmed input set. Display a diagnostic message in this
4668 * case explaining why the filter could not be accepted.
4670 if (*fdir_filter_count) {
4671 netif_err(pf, drv, vsi->netdev, "Cannot change input set for %s flows until %d preexisting filters are removed\n",
4673 *fdir_filter_count);
4677 i40e_write_fd_input_set(pf, index, new_mask);
4679 /* IP_USER_FLOW filters match both IPv4/Other and IPv4/Fragmented
4680 * frames. If we're programming the input set for IPv4/Other, we also
4681 * need to program the IPv4/Fragmented input set. Since we don't have
4682 * separate support, we'll always assume and enforce that the two flow
4683 * types must have matching input sets.
4685 if (index == I40E_FILTER_PCTYPE_NONF_IPV4_OTHER)
4686 i40e_write_fd_input_set(pf, I40E_FILTER_PCTYPE_FRAG_IPV4,
4689 /* Add the new offset and update table, if necessary */
4690 if (new_flex_offset) {
4691 err = i40e_add_flex_offset(&pf->l4_flex_pit_list, src_offset,
4697 err = i40e_add_flex_offset(&pf->l3_flex_pit_list,
4704 i40e_reprogram_flex_pit(pf);
4711 * i40e_match_fdir_filter - Return true of two filters match
4712 * @a: pointer to filter struct
4713 * @b: pointer to filter struct
4715 * Returns true if the two filters match exactly the same criteria. I.e. they
4716 * match the same flow type and have the same parameters. We don't need to
4717 * check any input-set since all filters of the same flow type must use the
4720 static bool i40e_match_fdir_filter(struct i40e_fdir_filter *a,
4721 struct i40e_fdir_filter *b)
4723 /* The filters do not much if any of these criteria differ. */
4724 if (a->dst_ip != b->dst_ip ||
4725 a->src_ip != b->src_ip ||
4726 a->dst_port != b->dst_port ||
4727 a->src_port != b->src_port ||
4728 a->flow_type != b->flow_type ||
4729 a->ipl4_proto != b->ipl4_proto ||
4730 a->vlan_tag != b->vlan_tag ||
4731 a->vlan_etype != b->vlan_etype)
4738 * i40e_disallow_matching_filters - Check that new filters differ
4739 * @vsi: pointer to the targeted VSI
4740 * @input: new filter to check
4742 * Due to hardware limitations, it is not possible for two filters that match
4743 * similar criteria to be programmed at the same time. This is true for a few
4746 * (a) all filters matching a particular flow type must use the same input
4747 * set, that is they must match the same criteria.
4748 * (b) different flow types will never match the same packet, as the flow type
4749 * is decided by hardware before checking which rules apply.
4750 * (c) hardware has no way to distinguish which order filters apply in.
4752 * Due to this, we can't really support using the location data to order
4753 * filters in the hardware parsing. It is technically possible for the user to
4754 * request two filters matching the same criteria but which select different
4755 * queues. In this case, rather than keep both filters in the list, we reject
4756 * the 2nd filter when the user requests adding it.
4758 * This avoids needing to track location for programming the filter to
4759 * hardware, and ensures that we avoid some strange scenarios involving
4760 * deleting filters which match the same criteria.
4762 static int i40e_disallow_matching_filters(struct i40e_vsi *vsi,
4763 struct i40e_fdir_filter *input)
4765 struct i40e_pf *pf = vsi->back;
4766 struct i40e_fdir_filter *rule;
4767 struct hlist_node *node2;
4769 /* Loop through every filter, and check that it doesn't match */
4770 hlist_for_each_entry_safe(rule, node2,
4771 &pf->fdir_filter_list, fdir_node) {
4772 /* Don't check the filters match if they share the same fd_id,
4773 * since the new filter is actually just updating the target
4774 * of the old filter.
4776 if (rule->fd_id == input->fd_id)
4779 /* If any filters match, then print a warning message to the
4780 * kernel message buffer and bail out.
4782 if (i40e_match_fdir_filter(rule, input)) {
4783 dev_warn(&pf->pdev->dev,
4784 "Existing user defined filter %d already matches this flow.\n",
4794 * i40e_add_fdir_ethtool - Add/Remove Flow Director filters
4795 * @vsi: pointer to the targeted VSI
4796 * @cmd: command to get or set RX flow classification rules
4798 * Add Flow Director filters for a specific flow spec based on their
4799 * protocol. Returns 0 if the filters were successfully added.
4801 static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
4802 struct ethtool_rxnfc *cmd)
4804 struct i40e_rx_flow_userdef userdef;
4805 struct ethtool_rx_flow_spec *fsp;
4806 struct i40e_fdir_filter *input;
4807 u16 dest_vsi = 0, q_index = 0;
4816 if (!test_bit(I40E_FLAG_FD_SB_ENA, pf->flags))
4819 if (test_bit(__I40E_FD_SB_AUTO_DISABLED, pf->state))
4822 if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
4823 test_bit(__I40E_RESET_INTR_RECEIVED, pf->state))
4826 if (test_bit(__I40E_FD_FLUSH_REQUESTED, pf->state))
4829 fsp = (struct ethtool_rx_flow_spec *)&cmd->fs;
4831 /* Parse the user-defined field */
4832 if (i40e_parse_rx_flow_user_data(fsp, &userdef))
4835 /* Extended MAC field is not supported */
4836 if (fsp->flow_type & FLOW_MAC_EXT)
4839 ret = i40e_check_fdir_input_set(vsi, fsp, &userdef);
4843 if (fsp->location >= (pf->hw.func_caps.fd_filters_best_effort +
4844 pf->hw.func_caps.fd_filters_guaranteed)) {
4848 /* ring_cookie is either the drop index, or is a mask of the queue
4849 * index and VF id we wish to target.
4851 if (fsp->ring_cookie == RX_CLS_FLOW_DISC) {
4852 dest_ctl = I40E_FILTER_PROGRAM_DESC_DEST_DROP_PACKET;
4854 u32 ring = ethtool_get_flow_spec_ring(fsp->ring_cookie);
4855 u8 vf = ethtool_get_flow_spec_ring_vf(fsp->ring_cookie);
4858 if (ring >= vsi->num_queue_pairs)
4862 /* VFs are zero-indexed, so we subtract one here */
4865 if (vf >= pf->num_alloc_vfs)
4867 if (ring >= pf->vf[vf].num_queue_pairs)
4869 dest_vsi = pf->vf[vf].lan_vsi_id;
4871 dest_ctl = I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX;
4875 input = kzalloc(sizeof(*input), GFP_KERNEL);
4880 input->fd_id = fsp->location;
4881 input->q_index = q_index;
4882 input->dest_vsi = dest_vsi;
4883 input->dest_ctl = dest_ctl;
4884 input->fd_status = I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID;
4885 input->cnt_index = I40E_FD_SB_STAT_IDX(pf->hw.pf_id);
4886 input->dst_ip = fsp->h_u.tcp_ip4_spec.ip4src;
4887 input->src_ip = fsp->h_u.tcp_ip4_spec.ip4dst;
4888 input->flow_type = fsp->flow_type & ~FLOW_EXT;
4890 input->vlan_etype = fsp->h_ext.vlan_etype;
4891 if (!fsp->m_ext.vlan_etype && fsp->h_ext.vlan_tci)
4892 input->vlan_etype = cpu_to_be16(ETH_P_8021Q);
4893 if (fsp->m_ext.vlan_tci && input->vlan_etype)
4894 input->vlan_tag = fsp->h_ext.vlan_tci;
4895 if (input->flow_type == IPV6_USER_FLOW ||
4896 input->flow_type == UDP_V6_FLOW ||
4897 input->flow_type == TCP_V6_FLOW ||
4898 input->flow_type == SCTP_V6_FLOW) {
4899 /* Reverse the src and dest notion, since the HW expects them
4900 * to be from Tx perspective where as the input from user is
4901 * from Rx filter view.
4903 input->ipl4_proto = fsp->h_u.usr_ip6_spec.l4_proto;
4904 input->dst_port = fsp->h_u.tcp_ip6_spec.psrc;
4905 input->src_port = fsp->h_u.tcp_ip6_spec.pdst;
4906 memcpy(input->dst_ip6, fsp->h_u.ah_ip6_spec.ip6src,
4907 sizeof(__be32) * 4);
4908 memcpy(input->src_ip6, fsp->h_u.ah_ip6_spec.ip6dst,
4909 sizeof(__be32) * 4);
4911 /* Reverse the src and dest notion, since the HW expects them
4912 * to be from Tx perspective where as the input from user is
4913 * from Rx filter view.
4915 input->ipl4_proto = fsp->h_u.usr_ip4_spec.proto;
4916 input->dst_port = fsp->h_u.tcp_ip4_spec.psrc;
4917 input->src_port = fsp->h_u.tcp_ip4_spec.pdst;
4918 input->dst_ip = fsp->h_u.tcp_ip4_spec.ip4src;
4919 input->src_ip = fsp->h_u.tcp_ip4_spec.ip4dst;
4922 if (userdef.flex_filter) {
4923 input->flex_filter = true;
4924 input->flex_word = cpu_to_be16(userdef.flex_word);
4925 input->flex_offset = userdef.flex_offset;
4928 /* Avoid programming two filters with identical match criteria. */
4929 ret = i40e_disallow_matching_filters(vsi, input);
4931 goto free_filter_memory;
4933 /* Add the input filter to the fdir_input_list, possibly replacing
4934 * a previous filter. Do not free the input structure after adding it
4935 * to the list as this would cause a use-after-free bug.
4937 i40e_update_ethtool_fdir_entry(vsi, input, fsp->location, NULL);
4938 ret = i40e_add_del_fdir(vsi, input, true);
4940 goto remove_sw_rule;
4944 hlist_del(&input->fdir_node);
4945 pf->fdir_pf_active_filters--;
4952 * i40e_set_rxnfc - command to set RX flow classification rules
4953 * @netdev: network interface device structure
4954 * @cmd: ethtool rxnfc command
4956 * Returns Success if the command is supported.
4958 static int i40e_set_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd)
4960 struct i40e_netdev_priv *np = netdev_priv(netdev);
4961 struct i40e_vsi *vsi = np->vsi;
4962 struct i40e_pf *pf = vsi->back;
4963 int ret = -EOPNOTSUPP;
4967 ret = i40e_set_rss_hash_opt(pf, cmd);
4969 case ETHTOOL_SRXCLSRLINS:
4970 ret = i40e_add_fdir_ethtool(vsi, cmd);
4972 case ETHTOOL_SRXCLSRLDEL:
4973 ret = i40e_del_fdir_entry(vsi, cmd);
4983 * i40e_max_channels - get Max number of combined channels supported
4986 static unsigned int i40e_max_channels(struct i40e_vsi *vsi)
4988 /* TODO: This code assumes DCB and FD is disabled for now. */
4989 return vsi->alloc_queue_pairs;
4993 * i40e_get_channels - Get the current channels enabled and max supported etc.
4994 * @dev: network interface device structure
4995 * @ch: ethtool channels structure
4997 * We don't support separate tx and rx queues as channels. The other count
4998 * represents how many queues are being used for control. max_combined counts
4999 * how many queue pairs we can support. They may not be mapped 1 to 1 with
5000 * q_vectors since we support a lot more queue pairs than q_vectors.
5002 static void i40e_get_channels(struct net_device *dev,
5003 struct ethtool_channels *ch)
5005 struct i40e_netdev_priv *np = netdev_priv(dev);
5006 struct i40e_vsi *vsi = np->vsi;
5007 struct i40e_pf *pf = vsi->back;
5009 /* report maximum channels */
5010 ch->max_combined = i40e_max_channels(vsi);
5012 /* report info for other vector */
5013 ch->other_count = test_bit(I40E_FLAG_FD_SB_ENA, pf->flags) ? 1 : 0;
5014 ch->max_other = ch->other_count;
5016 /* Note: This code assumes DCB is disabled for now. */
5017 ch->combined_count = vsi->num_queue_pairs;
5021 * i40e_set_channels - Set the new channels count.
5022 * @dev: network interface device structure
5023 * @ch: ethtool channels structure
5025 * The new channels count may not be the same as requested by the user
5026 * since it gets rounded down to a power of 2 value.
5028 static int i40e_set_channels(struct net_device *dev,
5029 struct ethtool_channels *ch)
5031 const u8 drop = I40E_FILTER_PROGRAM_DESC_DEST_DROP_PACKET;
5032 struct i40e_netdev_priv *np = netdev_priv(dev);
5033 unsigned int count = ch->combined_count;
5034 struct i40e_vsi *vsi = np->vsi;
5035 struct i40e_pf *pf = vsi->back;
5036 struct i40e_fdir_filter *rule;
5037 struct hlist_node *node2;
5041 /* We do not support setting channels for any other VSI at present */
5042 if (vsi->type != I40E_VSI_MAIN)
5045 /* We do not support setting channels via ethtool when TCs are
5046 * configured through mqprio
5048 if (i40e_is_tc_mqprio_enabled(pf))
5051 /* verify they are not requesting separate vectors */
5052 if (!count || ch->rx_count || ch->tx_count)
5055 /* verify other_count has not changed */
5056 if (ch->other_count != (test_bit(I40E_FLAG_FD_SB_ENA, pf->flags) ? 1 : 0))
5059 /* verify the number of channels does not exceed hardware limits */
5060 if (count > i40e_max_channels(vsi))
5063 /* verify that the number of channels does not invalidate any current
5064 * flow director rules
5066 hlist_for_each_entry_safe(rule, node2,
5067 &pf->fdir_filter_list, fdir_node) {
5068 if (rule->dest_ctl != drop && count <= rule->q_index) {
5069 dev_warn(&pf->pdev->dev,
5070 "Existing user defined filter %d assigns flow to queue %d\n",
5071 rule->fd_id, rule->q_index);
5077 dev_err(&pf->pdev->dev,
5078 "Existing filter rules must be deleted to reduce combined channel count to %d\n",
5083 /* update feature limits from largest to smallest supported values */
5084 /* TODO: Flow director limit, DCB etc */
5086 /* use rss_reconfig to rebuild with new queue count and update traffic
5087 * class queue mapping
5089 new_count = i40e_reconfig_rss_queues(pf, count);
5097 * i40e_get_rxfh_key_size - get the RSS hash key size
5098 * @netdev: network interface device structure
5100 * Returns the table size.
5102 static u32 i40e_get_rxfh_key_size(struct net_device *netdev)
5104 return I40E_HKEY_ARRAY_SIZE;
5108 * i40e_get_rxfh_indir_size - get the rx flow hash indirection table size
5109 * @netdev: network interface device structure
5111 * Returns the table size.
5113 static u32 i40e_get_rxfh_indir_size(struct net_device *netdev)
5115 return I40E_HLUT_ARRAY_SIZE;
5119 * i40e_get_rxfh - get the rx flow hash indirection table
5120 * @netdev: network interface device structure
5121 * @rxfh: pointer to param struct (indir, key, hfunc)
5123 * Reads the indirection table directly from the hardware. Returns 0 on
5126 static int i40e_get_rxfh(struct net_device *netdev,
5127 struct ethtool_rxfh_param *rxfh)
5129 struct i40e_netdev_priv *np = netdev_priv(netdev);
5130 struct i40e_vsi *vsi = np->vsi;
5131 u8 *lut, *seed = NULL;
5135 rxfh->hfunc = ETH_RSS_HASH_TOP;
5141 lut = kzalloc(I40E_HLUT_ARRAY_SIZE, GFP_KERNEL);
5144 ret = i40e_get_rss(vsi, seed, lut, I40E_HLUT_ARRAY_SIZE);
5147 for (i = 0; i < I40E_HLUT_ARRAY_SIZE; i++)
5148 rxfh->indir[i] = (u32)(lut[i]);
5157 * i40e_set_rxfh - set the rx flow hash indirection table
5158 * @netdev: network interface device structure
5159 * @rxfh: pointer to param struct (indir, key, hfunc)
5160 * @extack: extended ACK from the Netlink message
5162 * Returns -EINVAL if the table specifies an invalid queue id, otherwise
5163 * returns 0 after programming the table.
5165 static int i40e_set_rxfh(struct net_device *netdev,
5166 struct ethtool_rxfh_param *rxfh,
5167 struct netlink_ext_ack *extack)
5169 struct i40e_netdev_priv *np = netdev_priv(netdev);
5170 struct i40e_vsi *vsi = np->vsi;
5171 struct i40e_pf *pf = vsi->back;
5175 if (rxfh->hfunc != ETH_RSS_HASH_NO_CHANGE &&
5176 rxfh->hfunc != ETH_RSS_HASH_TOP)
5180 if (!vsi->rss_hkey_user) {
5181 vsi->rss_hkey_user = kzalloc(I40E_HKEY_ARRAY_SIZE,
5183 if (!vsi->rss_hkey_user)
5186 memcpy(vsi->rss_hkey_user, rxfh->key, I40E_HKEY_ARRAY_SIZE);
5187 seed = vsi->rss_hkey_user;
5189 if (!vsi->rss_lut_user) {
5190 vsi->rss_lut_user = kzalloc(I40E_HLUT_ARRAY_SIZE, GFP_KERNEL);
5191 if (!vsi->rss_lut_user)
5195 /* Each 32 bits pointed by 'indir' is stored with a lut entry */
5197 for (i = 0; i < I40E_HLUT_ARRAY_SIZE; i++)
5198 vsi->rss_lut_user[i] = (u8)(rxfh->indir[i]);
5200 i40e_fill_rss_lut(pf, vsi->rss_lut_user, I40E_HLUT_ARRAY_SIZE,
5203 return i40e_config_rss(vsi, seed, vsi->rss_lut_user,
5204 I40E_HLUT_ARRAY_SIZE);
5208 * i40e_get_priv_flags - report device private flags
5209 * @dev: network interface device structure
5211 * The get string set count and the string set should be matched for each
5212 * flag returned. Add new strings for each flag to the i40e_gstrings_priv_flags
5215 * Returns a u32 bitmap of flags.
5217 static u32 i40e_get_priv_flags(struct net_device *dev)
5219 struct i40e_netdev_priv *np = netdev_priv(dev);
5220 struct i40e_vsi *vsi = np->vsi;
5221 struct i40e_pf *pf = vsi->back;
5222 u32 i, j, ret_flags = 0;
5224 for (i = 0; i < I40E_PRIV_FLAGS_STR_LEN; i++) {
5225 const struct i40e_priv_flags *priv_flag;
5227 priv_flag = &i40e_gstrings_priv_flags[i];
5229 if (test_bit(priv_flag->bitno, pf->flags))
5230 ret_flags |= BIT(i);
5233 if (pf->hw.pf_id != 0)
5236 for (j = 0; j < I40E_GL_PRIV_FLAGS_STR_LEN; j++) {
5237 const struct i40e_priv_flags *priv_flag;
5239 priv_flag = &i40e_gl_gstrings_priv_flags[j];
5241 if (test_bit(priv_flag->bitno, pf->flags))
5242 ret_flags |= BIT(i + j);
5249 * i40e_set_priv_flags - set private flags
5250 * @dev: network interface device structure
5251 * @flags: bit flags to be set
5253 static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
5255 DECLARE_BITMAP(changed_flags, I40E_PF_FLAGS_NBITS);
5256 DECLARE_BITMAP(orig_flags, I40E_PF_FLAGS_NBITS);
5257 DECLARE_BITMAP(new_flags, I40E_PF_FLAGS_NBITS);
5258 struct i40e_netdev_priv *np = netdev_priv(dev);
5259 enum i40e_admin_queue_err adq_err;
5260 struct i40e_vsi *vsi = np->vsi;
5261 struct i40e_pf *pf = vsi->back;
5262 u32 reset_needed = 0;
5266 bitmap_copy(orig_flags, pf->flags, I40E_PF_FLAGS_NBITS);
5267 bitmap_copy(new_flags, pf->flags, I40E_PF_FLAGS_NBITS);
5269 for (i = 0; i < I40E_PRIV_FLAGS_STR_LEN; i++) {
5270 const struct i40e_priv_flags *priv_flag;
5273 priv_flag = &i40e_gstrings_priv_flags[i];
5274 new_val = (flags & BIT(i)) ? true : false;
5276 /* If this is a read-only flag, it can't be changed */
5277 if (priv_flag->read_only &&
5278 test_bit(priv_flag->bitno, orig_flags) != new_val)
5282 set_bit(priv_flag->bitno, new_flags);
5284 clear_bit(priv_flag->bitno, new_flags);
5287 if (pf->hw.pf_id != 0)
5288 goto flags_complete;
5290 for (j = 0; j < I40E_GL_PRIV_FLAGS_STR_LEN; j++) {
5291 const struct i40e_priv_flags *priv_flag;
5294 priv_flag = &i40e_gl_gstrings_priv_flags[j];
5295 new_val = (flags & BIT(i + j)) ? true : false;
5297 /* If this is a read-only flag, it can't be changed */
5298 if (priv_flag->read_only &&
5299 test_bit(priv_flag->bitno, orig_flags) != new_val)
5303 set_bit(priv_flag->bitno, new_flags);
5305 clear_bit(priv_flag->bitno, new_flags);
5309 bitmap_xor(changed_flags, pf->flags, orig_flags, I40E_PF_FLAGS_NBITS);
5311 if (test_bit(I40E_FLAG_FW_LLDP_DIS, changed_flags))
5312 reset_needed = I40E_PF_RESET_AND_REBUILD_FLAG;
5314 if (test_bit(I40E_FLAG_VEB_STATS_ENA, changed_flags) ||
5315 test_bit(I40E_FLAG_LEGACY_RX_ENA, changed_flags) ||
5316 test_bit(I40E_FLAG_SOURCE_PRUNING_DIS, changed_flags))
5317 reset_needed = BIT(__I40E_PF_RESET_REQUESTED);
5319 /* Before we finalize any flag changes, we need to perform some
5320 * checks to ensure that the changes are supported and safe.
5323 /* ATR eviction is not supported on all devices */
5324 if (test_bit(I40E_FLAG_HW_ATR_EVICT_ENA, new_flags) &&
5325 !test_bit(I40E_HW_CAP_ATR_EVICT, pf->hw.caps))
5328 /* If the driver detected FW LLDP was disabled on init, this flag could
5329 * be set, however we do not support _changing_ the flag:
5330 * - on XL710 if NPAR is enabled or FW API version < 1.7
5331 * - on X722 with FW API version < 1.6
5332 * There are situations where older FW versions/NPAR enabled PFs could
5333 * disable LLDP, however we _must_ not allow the user to enable/disable
5334 * LLDP with this flag on unsupported FW versions.
5336 if (test_bit(I40E_FLAG_FW_LLDP_DIS, changed_flags) &&
5337 !test_bit(I40E_HW_CAP_FW_LLDP_STOPPABLE, pf->hw.caps)) {
5338 dev_warn(&pf->pdev->dev,
5339 "Device does not support changing FW LLDP\n");
5343 if (test_bit(I40E_FLAG_RS_FEC, changed_flags) &&
5344 pf->hw.device_id != I40E_DEV_ID_25G_SFP28 &&
5345 pf->hw.device_id != I40E_DEV_ID_25G_B) {
5346 dev_warn(&pf->pdev->dev,
5347 "Device does not support changing FEC configuration\n");
5351 if (test_bit(I40E_FLAG_BASE_R_FEC, changed_flags) &&
5352 pf->hw.device_id != I40E_DEV_ID_25G_SFP28 &&
5353 pf->hw.device_id != I40E_DEV_ID_25G_B &&
5354 pf->hw.device_id != I40E_DEV_ID_KX_X722) {
5355 dev_warn(&pf->pdev->dev,
5356 "Device does not support changing FEC configuration\n");
5360 /* Process any additional changes needed as a result of flag changes.
5361 * The changed_flags value reflects the list of bits that were
5362 * changed in the code above.
5365 /* Flush current ATR settings if ATR was disabled */
5366 if (test_bit(I40E_FLAG_FD_ATR_ENA, changed_flags) &&
5367 !test_bit(I40E_FLAG_FD_ATR_ENA, new_flags)) {
5368 set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state);
5369 set_bit(__I40E_FD_FLUSH_REQUESTED, pf->state);
5372 if (test_bit(I40E_FLAG_TRUE_PROMISC_ENA, changed_flags)) {
5373 u16 sw_flags = 0, valid_flags = 0;
5376 if (!test_bit(I40E_FLAG_TRUE_PROMISC_ENA, new_flags))
5377 sw_flags = I40E_AQ_SET_SWITCH_CFG_PROMISC;
5378 valid_flags = I40E_AQ_SET_SWITCH_CFG_PROMISC;
5379 ret = i40e_aq_set_switch_config(&pf->hw, sw_flags, valid_flags,
5381 if (ret && pf->hw.aq.asq_last_status != I40E_AQ_RC_ESRCH) {
5382 dev_info(&pf->pdev->dev,
5383 "couldn't set switch config bits, err %pe aq_err %s\n",
5385 i40e_aq_str(&pf->hw,
5386 pf->hw.aq.asq_last_status));
5387 /* not a fatal problem, just keep going */
5391 if (test_bit(I40E_FLAG_RS_FEC, changed_flags) ||
5392 test_bit(I40E_FLAG_BASE_R_FEC, changed_flags)) {
5395 if (test_bit(I40E_FLAG_RS_FEC, new_flags) &&
5396 test_bit(I40E_FLAG_BASE_R_FEC, new_flags)) {
5397 fec_cfg = I40E_AQ_SET_FEC_AUTO;
5398 } else if (test_bit(I40E_FLAG_RS_FEC, new_flags)) {
5399 fec_cfg = (I40E_AQ_SET_FEC_REQUEST_RS |
5400 I40E_AQ_SET_FEC_ABILITY_RS);
5401 } else if (test_bit(I40E_FLAG_BASE_R_FEC, new_flags)) {
5402 fec_cfg = (I40E_AQ_SET_FEC_REQUEST_KR |
5403 I40E_AQ_SET_FEC_ABILITY_KR);
5405 if (i40e_set_fec_cfg(dev, fec_cfg))
5406 dev_warn(&pf->pdev->dev, "Cannot change FEC config\n");
5409 if (test_bit(I40E_FLAG_LINK_DOWN_ON_CLOSE_ENA, changed_flags) &&
5410 test_bit(I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENA, orig_flags)) {
5411 dev_err(&pf->pdev->dev,
5412 "Setting link-down-on-close not supported on this port (because total-port-shutdown is enabled)\n");
5416 if (test_bit(I40E_FLAG_VF_VLAN_PRUNING_ENA, changed_flags) &&
5417 pf->num_alloc_vfs) {
5418 dev_warn(&pf->pdev->dev,
5419 "Changing vf-vlan-pruning flag while VF(s) are active is not supported\n");
5423 if (test_bit(I40E_FLAG_LEGACY_RX_ENA, changed_flags) &&
5424 I40E_2K_TOO_SMALL_WITH_PADDING) {
5425 dev_warn(&pf->pdev->dev,
5426 "2k Rx buffer is too small to fit standard MTU and skb_shared_info\n");
5430 if (test_bit(I40E_FLAG_LINK_DOWN_ON_CLOSE_ENA, changed_flags) &&
5431 test_bit(I40E_FLAG_LINK_DOWN_ON_CLOSE_ENA, new_flags) &&
5432 test_bit(I40E_FLAG_MFP_ENA, new_flags))
5433 dev_warn(&pf->pdev->dev,
5434 "Turning on link-down-on-close flag may affect other partitions\n");
5436 if (test_bit(I40E_FLAG_FW_LLDP_DIS, changed_flags)) {
5437 if (test_bit(I40E_FLAG_FW_LLDP_DIS, new_flags)) {
5438 #ifdef CONFIG_I40E_DCB
5439 i40e_dcb_sw_default_config(pf);
5440 #endif /* CONFIG_I40E_DCB */
5441 i40e_aq_cfg_lldp_mib_change_event(&pf->hw, false, NULL);
5442 i40e_aq_stop_lldp(&pf->hw, true, false, NULL);
5444 status = i40e_aq_start_lldp(&pf->hw, false, NULL);
5446 adq_err = pf->hw.aq.asq_last_status;
5448 case I40E_AQ_RC_EEXIST:
5449 dev_warn(&pf->pdev->dev,
5450 "FW LLDP agent is already running\n");
5453 case I40E_AQ_RC_EPERM:
5454 dev_warn(&pf->pdev->dev,
5455 "Device configuration forbids SW from starting the LLDP agent.\n");
5457 case I40E_AQ_RC_EAGAIN:
5458 dev_warn(&pf->pdev->dev,
5459 "Stop FW LLDP agent command is still being processed, please try again in a second.\n");
5462 dev_warn(&pf->pdev->dev,
5463 "Starting FW LLDP agent failed: error: %pe, %s\n",
5465 i40e_aq_str(&pf->hw,
5473 /* Now that we've checked to ensure that the new flags are valid, load
5474 * them into place. Since we only modify flags either (a) during
5475 * initialization or (b) while holding the RTNL lock, we don't need
5476 * anything fancy here.
5478 bitmap_copy(pf->flags, new_flags, I40E_PF_FLAGS_NBITS);
5480 /* Issue reset to cause things to take effect, as additional bits
5481 * are added we will need to create a mask of bits requiring reset
5484 i40e_do_reset(pf, reset_needed, true);
5490 * i40e_get_module_info - get (Q)SFP+ module type info
5491 * @netdev: network interface device structure
5492 * @modinfo: module EEPROM size and layout information structure
5494 static int i40e_get_module_info(struct net_device *netdev,
5495 struct ethtool_modinfo *modinfo)
5497 struct i40e_netdev_priv *np = netdev_priv(netdev);
5498 struct i40e_vsi *vsi = np->vsi;
5499 struct i40e_pf *pf = vsi->back;
5500 struct i40e_hw *hw = &pf->hw;
5501 u32 sff8472_comp = 0;
5502 u32 sff8472_swap = 0;
5503 u32 sff8636_rev = 0;
5507 /* Check if firmware supports reading module EEPROM. */
5508 if (!test_bit(I40E_HW_CAP_AQ_PHY_ACCESS, hw->caps)) {
5509 netdev_err(vsi->netdev, "Module EEPROM memory read not supported. Please update the NVM image.\n");
5513 status = i40e_update_link_info(hw);
5517 if (hw->phy.link_info.phy_type == I40E_PHY_TYPE_EMPTY) {
5518 netdev_err(vsi->netdev, "Cannot read module EEPROM memory. No module connected.\n");
5522 type = hw->phy.link_info.module_type[0];
5525 case I40E_MODULE_TYPE_SFP:
5526 status = i40e_aq_get_phy_register(hw,
5527 I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
5528 I40E_I2C_EEPROM_DEV_ADDR, true,
5529 I40E_MODULE_SFF_8472_COMP,
5530 &sff8472_comp, NULL);
5534 status = i40e_aq_get_phy_register(hw,
5535 I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
5536 I40E_I2C_EEPROM_DEV_ADDR, true,
5537 I40E_MODULE_SFF_8472_SWAP,
5538 &sff8472_swap, NULL);
5542 /* Check if the module requires address swap to access
5543 * the other EEPROM memory page.
5545 if (sff8472_swap & I40E_MODULE_SFF_ADDR_MODE) {
5546 netdev_warn(vsi->netdev, "Module address swap to access page 0xA2 is not supported.\n");
5547 modinfo->type = ETH_MODULE_SFF_8079;
5548 modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
5549 } else if (sff8472_comp == 0x00) {
5550 /* Module is not SFF-8472 compliant */
5551 modinfo->type = ETH_MODULE_SFF_8079;
5552 modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
5553 } else if (!(sff8472_swap & I40E_MODULE_SFF_DDM_IMPLEMENTED)) {
5554 /* Module is SFF-8472 compliant but doesn't implement
5555 * Digital Diagnostic Monitoring (DDM).
5557 modinfo->type = ETH_MODULE_SFF_8079;
5558 modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
5560 modinfo->type = ETH_MODULE_SFF_8472;
5561 modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
5564 case I40E_MODULE_TYPE_QSFP_PLUS:
5565 /* Read from memory page 0. */
5566 status = i40e_aq_get_phy_register(hw,
5567 I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
5569 I40E_MODULE_REVISION_ADDR,
5570 &sff8636_rev, NULL);
5573 /* Determine revision compliance byte */
5574 if (sff8636_rev > 0x02) {
5575 /* Module is SFF-8636 compliant */
5576 modinfo->type = ETH_MODULE_SFF_8636;
5577 modinfo->eeprom_len = I40E_MODULE_QSFP_MAX_LEN;
5579 modinfo->type = ETH_MODULE_SFF_8436;
5580 modinfo->eeprom_len = I40E_MODULE_QSFP_MAX_LEN;
5583 case I40E_MODULE_TYPE_QSFP28:
5584 modinfo->type = ETH_MODULE_SFF_8636;
5585 modinfo->eeprom_len = I40E_MODULE_QSFP_MAX_LEN;
5588 netdev_dbg(vsi->netdev, "SFP module type unrecognized or no SFP connector used.\n");
5595 * i40e_get_module_eeprom - fills buffer with (Q)SFP+ module memory contents
5596 * @netdev: network interface device structure
5597 * @ee: EEPROM dump request structure
5598 * @data: buffer to be filled with EEPROM contents
5600 static int i40e_get_module_eeprom(struct net_device *netdev,
5601 struct ethtool_eeprom *ee,
5604 struct i40e_netdev_priv *np = netdev_priv(netdev);
5605 struct i40e_vsi *vsi = np->vsi;
5606 struct i40e_pf *pf = vsi->back;
5607 struct i40e_hw *hw = &pf->hw;
5608 bool is_sfp = false;
5613 if (!ee || !ee->len || !data)
5616 if (hw->phy.link_info.module_type[0] == I40E_MODULE_TYPE_SFP)
5619 for (i = 0; i < ee->len; i++) {
5620 u32 offset = i + ee->offset;
5621 u32 addr = is_sfp ? I40E_I2C_EEPROM_DEV_ADDR : 0;
5623 /* Check if we need to access the other memory page */
5625 if (offset >= ETH_MODULE_SFF_8079_LEN) {
5626 offset -= ETH_MODULE_SFF_8079_LEN;
5627 addr = I40E_I2C_EEPROM_DEV_ADDR2;
5630 while (offset >= ETH_MODULE_SFF_8436_LEN) {
5631 /* Compute memory page number and offset. */
5632 offset -= ETH_MODULE_SFF_8436_LEN / 2;
5637 status = i40e_aq_get_phy_register(hw,
5638 I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
5639 addr, true, offset, &value, NULL);
5647 static int i40e_get_eee(struct net_device *netdev, struct ethtool_keee *edata)
5649 struct i40e_netdev_priv *np = netdev_priv(netdev);
5650 struct i40e_aq_get_phy_abilities_resp phy_cfg;
5651 struct i40e_vsi *vsi = np->vsi;
5652 struct i40e_pf *pf = vsi->back;
5653 struct i40e_hw *hw = &pf->hw;
5656 /* Get initial PHY capabilities */
5657 status = i40e_aq_get_phy_capabilities(hw, false, true, &phy_cfg, NULL);
5661 /* Check whether NIC configuration is compatible with Energy Efficient
5662 * Ethernet (EEE) mode.
5664 if (phy_cfg.eee_capability == 0)
5667 edata->supported = SUPPORTED_Autoneg;
5668 edata->lp_advertised = edata->supported;
5670 /* Get current configuration */
5671 status = i40e_aq_get_phy_capabilities(hw, false, false, &phy_cfg, NULL);
5675 edata->advertised = phy_cfg.eee_capability ? SUPPORTED_Autoneg : 0U;
5676 edata->eee_enabled = !!edata->advertised;
5677 edata->tx_lpi_enabled = pf->stats.tx_lpi_status;
5679 edata->eee_active = pf->stats.tx_lpi_status && pf->stats.rx_lpi_status;
5684 static int i40e_is_eee_param_supported(struct net_device *netdev,
5685 struct ethtool_keee *edata)
5687 struct i40e_netdev_priv *np = netdev_priv(netdev);
5688 struct i40e_vsi *vsi = np->vsi;
5689 struct i40e_pf *pf = vsi->back;
5690 struct i40e_ethtool_not_used {
5694 {edata->advertised & ~SUPPORTED_Autoneg, "advertise"},
5695 {edata->tx_lpi_timer, "tx-timer"},
5696 {edata->tx_lpi_enabled != pf->stats.tx_lpi_status, "tx-lpi"}
5700 for (i = 0; i < ARRAY_SIZE(param); i++) {
5701 if (param[i].value) {
5703 "EEE setting %s not supported\n",
5712 static int i40e_set_eee(struct net_device *netdev, struct ethtool_keee *edata)
5714 struct i40e_netdev_priv *np = netdev_priv(netdev);
5715 struct i40e_aq_get_phy_abilities_resp abilities;
5716 struct i40e_aq_set_phy_config config;
5717 struct i40e_vsi *vsi = np->vsi;
5718 struct i40e_pf *pf = vsi->back;
5719 struct i40e_hw *hw = &pf->hw;
5720 __le16 eee_capability;
5723 /* Deny parameters we don't support */
5724 if (i40e_is_eee_param_supported(netdev, edata))
5727 /* Get initial PHY capabilities */
5728 status = i40e_aq_get_phy_capabilities(hw, false, true, &abilities,
5733 /* Check whether NIC configuration is compatible with Energy Efficient
5734 * Ethernet (EEE) mode.
5736 if (abilities.eee_capability == 0)
5739 /* Cache initial EEE capability */
5740 eee_capability = abilities.eee_capability;
5742 /* Get current PHY configuration */
5743 status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
5748 /* Cache current PHY configuration */
5749 config.phy_type = abilities.phy_type;
5750 config.phy_type_ext = abilities.phy_type_ext;
5751 config.link_speed = abilities.link_speed;
5752 config.abilities = abilities.abilities |
5753 I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
5754 config.eeer = abilities.eeer_val;
5755 config.low_power_ctrl = abilities.d3_lpan;
5756 config.fec_config = abilities.fec_cfg_curr_mod_ext_info &
5757 I40E_AQ_PHY_FEC_CONFIG_MASK;
5759 /* Set desired EEE state */
5760 if (edata->eee_enabled) {
5761 config.eee_capability = eee_capability;
5762 config.eeer |= cpu_to_le32(I40E_PRTPM_EEER_TX_LPI_EN_MASK);
5764 config.eee_capability = 0;
5765 config.eeer &= cpu_to_le32(~I40E_PRTPM_EEER_TX_LPI_EN_MASK);
5768 /* Apply modified PHY configuration */
5769 status = i40e_aq_set_phy_config(hw, &config, NULL);
5776 static const struct ethtool_ops i40e_ethtool_recovery_mode_ops = {
5777 .get_drvinfo = i40e_get_drvinfo,
5778 .set_eeprom = i40e_set_eeprom,
5779 .get_eeprom_len = i40e_get_eeprom_len,
5780 .get_eeprom = i40e_get_eeprom,
5783 static const struct ethtool_ops i40e_ethtool_ops = {
5784 .supported_coalesce_params = ETHTOOL_COALESCE_USECS |
5785 ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ |
5786 ETHTOOL_COALESCE_USE_ADAPTIVE |
5787 ETHTOOL_COALESCE_RX_USECS_HIGH |
5788 ETHTOOL_COALESCE_TX_USECS_HIGH,
5789 .get_drvinfo = i40e_get_drvinfo,
5790 .get_regs_len = i40e_get_regs_len,
5791 .get_regs = i40e_get_regs,
5792 .nway_reset = i40e_nway_reset,
5793 .get_link = ethtool_op_get_link,
5794 .get_wol = i40e_get_wol,
5795 .set_wol = i40e_set_wol,
5796 .set_eeprom = i40e_set_eeprom,
5797 .get_eeprom_len = i40e_get_eeprom_len,
5798 .get_eeprom = i40e_get_eeprom,
5799 .get_ringparam = i40e_get_ringparam,
5800 .set_ringparam = i40e_set_ringparam,
5801 .get_pauseparam = i40e_get_pauseparam,
5802 .set_pauseparam = i40e_set_pauseparam,
5803 .get_msglevel = i40e_get_msglevel,
5804 .set_msglevel = i40e_set_msglevel,
5805 .get_rxnfc = i40e_get_rxnfc,
5806 .set_rxnfc = i40e_set_rxnfc,
5807 .self_test = i40e_diag_test,
5808 .get_strings = i40e_get_strings,
5809 .get_eee = i40e_get_eee,
5810 .set_eee = i40e_set_eee,
5811 .set_phys_id = i40e_set_phys_id,
5812 .get_sset_count = i40e_get_sset_count,
5813 .get_ethtool_stats = i40e_get_ethtool_stats,
5814 .get_coalesce = i40e_get_coalesce,
5815 .set_coalesce = i40e_set_coalesce,
5816 .get_rxfh_key_size = i40e_get_rxfh_key_size,
5817 .get_rxfh_indir_size = i40e_get_rxfh_indir_size,
5818 .get_rxfh = i40e_get_rxfh,
5819 .set_rxfh = i40e_set_rxfh,
5820 .get_channels = i40e_get_channels,
5821 .set_channels = i40e_set_channels,
5822 .get_module_info = i40e_get_module_info,
5823 .get_module_eeprom = i40e_get_module_eeprom,
5824 .get_ts_info = i40e_get_ts_info,
5825 .get_priv_flags = i40e_get_priv_flags,
5826 .set_priv_flags = i40e_set_priv_flags,
5827 .get_per_queue_coalesce = i40e_get_per_queue_coalesce,
5828 .set_per_queue_coalesce = i40e_set_per_queue_coalesce,
5829 .get_link_ksettings = i40e_get_link_ksettings,
5830 .set_link_ksettings = i40e_set_link_ksettings,
5831 .get_fecparam = i40e_get_fec_param,
5832 .set_fecparam = i40e_set_fec_param,
5833 .flash_device = i40e_ddp_flash,
5836 void i40e_set_ethtool_ops(struct net_device *netdev)
5838 struct i40e_netdev_priv *np = netdev_priv(netdev);
5839 struct i40e_pf *pf = np->vsi->back;
5841 if (!test_bit(__I40E_RECOVERY_MODE, pf->state))
5842 netdev->ethtool_ops = &i40e_ethtool_ops;
5844 netdev->ethtool_ops = &i40e_ethtool_recovery_mode_ops;