1 /* bnx2x_main.c: QLogic Everest network driver.
3 * Copyright (c) 2007-2013 Broadcom Corporation
4 * Copyright (c) 2014 QLogic Corporation
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation.
11 * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
12 * Written by: Eliezer Tamir
13 * Based on code from Michael Chan's bnx2 driver
14 * UDP CSUM errata workaround by Arik Gendelman
15 * Slowpath and fastpath rework by Vladislav Zolotarov
16 * Statistics and Link management by Yitchak Gertner
20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
22 #include <linux/module.h>
23 #include <linux/moduleparam.h>
24 #include <linux/kernel.h>
25 #include <linux/device.h> /* for dev_info() */
26 #include <linux/timer.h>
27 #include <linux/errno.h>
28 #include <linux/ioport.h>
29 #include <linux/slab.h>
30 #include <linux/interrupt.h>
31 #include <linux/pci.h>
32 #include <linux/aer.h>
33 #include <linux/init.h>
34 #include <linux/netdevice.h>
35 #include <linux/etherdevice.h>
36 #include <linux/skbuff.h>
37 #include <linux/dma-mapping.h>
38 #include <linux/bitops.h>
39 #include <linux/irq.h>
40 #include <linux/delay.h>
41 #include <asm/byteorder.h>
42 #include <linux/time.h>
43 #include <linux/ethtool.h>
44 #include <linux/mii.h>
45 #include <linux/if_vlan.h>
46 #include <linux/crash_dump.h>
50 #include <net/vxlan.h>
51 #include <net/checksum.h>
52 #include <net/ip6_checksum.h>
53 #include <linux/workqueue.h>
54 #include <linux/crc32.h>
55 #include <linux/crc32c.h>
56 #include <linux/prefetch.h>
57 #include <linux/zlib.h>
59 #include <linux/semaphore.h>
60 #include <linux/stringify.h>
61 #include <linux/vmalloc.h>
62 #if IS_ENABLED(CONFIG_BNX2X_GENEVE)
63 #include <net/geneve.h>
66 #include "bnx2x_init.h"
67 #include "bnx2x_init_ops.h"
68 #include "bnx2x_cmn.h"
69 #include "bnx2x_vfpf.h"
70 #include "bnx2x_dcb.h"
72 #include <linux/firmware.h>
73 #include "bnx2x_fw_file_hdr.h"
75 #define FW_FILE_VERSION \
76 __stringify(BCM_5710_FW_MAJOR_VERSION) "." \
77 __stringify(BCM_5710_FW_MINOR_VERSION) "." \
78 __stringify(BCM_5710_FW_REVISION_VERSION) "." \
79 __stringify(BCM_5710_FW_ENGINEERING_VERSION)
80 #define FW_FILE_NAME_E1 "bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw"
81 #define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw"
82 #define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw"
84 /* Time in jiffies before concluding the transmitter is hung */
85 #define TX_TIMEOUT (5*HZ)
87 static char version[] =
88 "QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver "
89 DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
91 MODULE_AUTHOR("Eliezer Tamir");
92 MODULE_DESCRIPTION("QLogic "
93 "BCM57710/57711/57711E/"
94 "57712/57712_MF/57800/57800_MF/57810/57810_MF/"
95 "57840/57840_MF Driver");
96 MODULE_LICENSE("GPL");
97 MODULE_VERSION(DRV_MODULE_VERSION);
98 MODULE_FIRMWARE(FW_FILE_NAME_E1);
99 MODULE_FIRMWARE(FW_FILE_NAME_E1H);
100 MODULE_FIRMWARE(FW_FILE_NAME_E2);
102 int bnx2x_num_queues;
103 module_param_named(num_queues, bnx2x_num_queues, int, S_IRUGO);
104 MODULE_PARM_DESC(num_queues,
105 " Set number of queues (default is as a number of CPUs)");
107 static int disable_tpa;
108 module_param(disable_tpa, int, S_IRUGO);
109 MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature");
112 module_param(int_mode, int, S_IRUGO);
113 MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X "
116 static int dropless_fc;
117 module_param(dropless_fc, int, S_IRUGO);
118 MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
120 static int mrrs = -1;
121 module_param(mrrs, int, S_IRUGO);
122 MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
125 module_param(debug, int, S_IRUGO);
126 MODULE_PARM_DESC(debug, " Default debug msglevel");
128 static struct workqueue_struct *bnx2x_wq;
129 struct workqueue_struct *bnx2x_iov_wq;
131 struct bnx2x_mac_vals {
142 enum bnx2x_board_type {
166 /* indexed by board_type, above */
170 [BCM57710] = { "QLogic BCM57710 10 Gigabit PCIe [Everest]" },
171 [BCM57711] = { "QLogic BCM57711 10 Gigabit PCIe" },
172 [BCM57711E] = { "QLogic BCM57711E 10 Gigabit PCIe" },
173 [BCM57712] = { "QLogic BCM57712 10 Gigabit Ethernet" },
174 [BCM57712_MF] = { "QLogic BCM57712 10 Gigabit Ethernet Multi Function" },
175 [BCM57712_VF] = { "QLogic BCM57712 10 Gigabit Ethernet Virtual Function" },
176 [BCM57800] = { "QLogic BCM57800 10 Gigabit Ethernet" },
177 [BCM57800_MF] = { "QLogic BCM57800 10 Gigabit Ethernet Multi Function" },
178 [BCM57800_VF] = { "QLogic BCM57800 10 Gigabit Ethernet Virtual Function" },
179 [BCM57810] = { "QLogic BCM57810 10 Gigabit Ethernet" },
180 [BCM57810_MF] = { "QLogic BCM57810 10 Gigabit Ethernet Multi Function" },
181 [BCM57810_VF] = { "QLogic BCM57810 10 Gigabit Ethernet Virtual Function" },
182 [BCM57840_4_10] = { "QLogic BCM57840 10 Gigabit Ethernet" },
183 [BCM57840_2_20] = { "QLogic BCM57840 20 Gigabit Ethernet" },
184 [BCM57840_MF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" },
185 [BCM57840_VF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" },
186 [BCM57811] = { "QLogic BCM57811 10 Gigabit Ethernet" },
187 [BCM57811_MF] = { "QLogic BCM57811 10 Gigabit Ethernet Multi Function" },
188 [BCM57840_O] = { "QLogic BCM57840 10/20 Gigabit Ethernet" },
189 [BCM57840_MFO] = { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" },
190 [BCM57811_VF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" }
193 #ifndef PCI_DEVICE_ID_NX2_57710
194 #define PCI_DEVICE_ID_NX2_57710 CHIP_NUM_57710
196 #ifndef PCI_DEVICE_ID_NX2_57711
197 #define PCI_DEVICE_ID_NX2_57711 CHIP_NUM_57711
199 #ifndef PCI_DEVICE_ID_NX2_57711E
200 #define PCI_DEVICE_ID_NX2_57711E CHIP_NUM_57711E
202 #ifndef PCI_DEVICE_ID_NX2_57712
203 #define PCI_DEVICE_ID_NX2_57712 CHIP_NUM_57712
205 #ifndef PCI_DEVICE_ID_NX2_57712_MF
206 #define PCI_DEVICE_ID_NX2_57712_MF CHIP_NUM_57712_MF
208 #ifndef PCI_DEVICE_ID_NX2_57712_VF
209 #define PCI_DEVICE_ID_NX2_57712_VF CHIP_NUM_57712_VF
211 #ifndef PCI_DEVICE_ID_NX2_57800
212 #define PCI_DEVICE_ID_NX2_57800 CHIP_NUM_57800
214 #ifndef PCI_DEVICE_ID_NX2_57800_MF
215 #define PCI_DEVICE_ID_NX2_57800_MF CHIP_NUM_57800_MF
217 #ifndef PCI_DEVICE_ID_NX2_57800_VF
218 #define PCI_DEVICE_ID_NX2_57800_VF CHIP_NUM_57800_VF
220 #ifndef PCI_DEVICE_ID_NX2_57810
221 #define PCI_DEVICE_ID_NX2_57810 CHIP_NUM_57810
223 #ifndef PCI_DEVICE_ID_NX2_57810_MF
224 #define PCI_DEVICE_ID_NX2_57810_MF CHIP_NUM_57810_MF
226 #ifndef PCI_DEVICE_ID_NX2_57840_O
227 #define PCI_DEVICE_ID_NX2_57840_O CHIP_NUM_57840_OBSOLETE
229 #ifndef PCI_DEVICE_ID_NX2_57810_VF
230 #define PCI_DEVICE_ID_NX2_57810_VF CHIP_NUM_57810_VF
232 #ifndef PCI_DEVICE_ID_NX2_57840_4_10
233 #define PCI_DEVICE_ID_NX2_57840_4_10 CHIP_NUM_57840_4_10
235 #ifndef PCI_DEVICE_ID_NX2_57840_2_20
236 #define PCI_DEVICE_ID_NX2_57840_2_20 CHIP_NUM_57840_2_20
238 #ifndef PCI_DEVICE_ID_NX2_57840_MFO
239 #define PCI_DEVICE_ID_NX2_57840_MFO CHIP_NUM_57840_MF_OBSOLETE
241 #ifndef PCI_DEVICE_ID_NX2_57840_MF
242 #define PCI_DEVICE_ID_NX2_57840_MF CHIP_NUM_57840_MF
244 #ifndef PCI_DEVICE_ID_NX2_57840_VF
245 #define PCI_DEVICE_ID_NX2_57840_VF CHIP_NUM_57840_VF
247 #ifndef PCI_DEVICE_ID_NX2_57811
248 #define PCI_DEVICE_ID_NX2_57811 CHIP_NUM_57811
250 #ifndef PCI_DEVICE_ID_NX2_57811_MF
251 #define PCI_DEVICE_ID_NX2_57811_MF CHIP_NUM_57811_MF
253 #ifndef PCI_DEVICE_ID_NX2_57811_VF
254 #define PCI_DEVICE_ID_NX2_57811_VF CHIP_NUM_57811_VF
257 static const struct pci_device_id bnx2x_pci_tbl[] = {
258 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 },
259 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 },
260 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E },
261 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712), BCM57712 },
262 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_MF), BCM57712_MF },
263 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_VF), BCM57712_VF },
264 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800), BCM57800 },
265 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_MF), BCM57800_MF },
266 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_VF), BCM57800_VF },
267 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810), BCM57810 },
268 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_MF), BCM57810_MF },
269 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_O), BCM57840_O },
270 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_4_10), BCM57840_4_10 },
271 { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_NX2_57840_4_10), BCM57840_4_10 },
272 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_2_20), BCM57840_2_20 },
273 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_VF), BCM57810_VF },
274 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MFO), BCM57840_MFO },
275 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF },
276 { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF },
277 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_VF), BCM57840_VF },
278 { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_NX2_57840_VF), BCM57840_VF },
279 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811), BCM57811 },
280 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_MF), BCM57811_MF },
281 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_VF), BCM57811_VF },
285 MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl);
287 /* Global resources for unloading a previously loaded device */
288 #define BNX2X_PREV_WAIT_NEEDED 1
289 static DEFINE_SEMAPHORE(bnx2x_prev_sem);
290 static LIST_HEAD(bnx2x_prev_list);
292 /* Forward declaration */
293 static struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev);
294 static u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp);
295 static int bnx2x_set_storm_rx_mode(struct bnx2x *bp);
297 /****************************************************************************
298 * General service functions
299 ****************************************************************************/
301 static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr);
303 static void __storm_memset_dma_mapping(struct bnx2x *bp,
304 u32 addr, dma_addr_t mapping)
306 REG_WR(bp, addr, U64_LO(mapping));
307 REG_WR(bp, addr + 4, U64_HI(mapping));
310 static void storm_memset_spq_addr(struct bnx2x *bp,
311 dma_addr_t mapping, u16 abs_fid)
313 u32 addr = XSEM_REG_FAST_MEMORY +
314 XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid);
316 __storm_memset_dma_mapping(bp, addr, mapping);
319 static void storm_memset_vf_to_pf(struct bnx2x *bp, u16 abs_fid,
322 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid),
324 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid),
326 REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid),
328 REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid),
332 static void storm_memset_func_en(struct bnx2x *bp, u16 abs_fid,
335 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid),
337 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid),
339 REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid),
341 REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid),
345 static void storm_memset_eq_data(struct bnx2x *bp,
346 struct event_ring_data *eq_data,
349 size_t size = sizeof(struct event_ring_data);
351 u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid);
353 __storm_memset_struct(bp, addr, size, (u32 *)eq_data);
356 static void storm_memset_eq_prod(struct bnx2x *bp, u16 eq_prod,
359 u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_PROD_OFFSET(pfid);
360 REG_WR16(bp, addr, eq_prod);
364 * locking is done by mcp
366 static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val)
368 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
369 pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val);
370 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
371 PCICFG_VENDOR_ID_OFFSET);
374 static u32 bnx2x_reg_rd_ind(struct bnx2x *bp, u32 addr)
378 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
379 pci_read_config_dword(bp->pdev, PCICFG_GRC_DATA, &val);
380 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
381 PCICFG_VENDOR_ID_OFFSET);
386 #define DMAE_DP_SRC_GRC "grc src_addr [%08x]"
387 #define DMAE_DP_SRC_PCI "pci src_addr [%x:%08x]"
388 #define DMAE_DP_DST_GRC "grc dst_addr [%08x]"
389 #define DMAE_DP_DST_PCI "pci dst_addr [%x:%08x]"
390 #define DMAE_DP_DST_NONE "dst_addr [none]"
392 static void bnx2x_dp_dmae(struct bnx2x *bp,
393 struct dmae_command *dmae, int msglvl)
395 u32 src_type = dmae->opcode & DMAE_COMMAND_SRC;
398 switch (dmae->opcode & DMAE_COMMAND_DST) {
399 case DMAE_CMD_DST_PCI:
400 if (src_type == DMAE_CMD_SRC_PCI)
401 DP(msglvl, "DMAE: opcode 0x%08x\n"
402 "src [%x:%08x], len [%d*4], dst [%x:%08x]\n"
403 "comp_addr [%x:%08x], comp_val 0x%08x\n",
404 dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
405 dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo,
406 dmae->comp_addr_hi, dmae->comp_addr_lo,
409 DP(msglvl, "DMAE: opcode 0x%08x\n"
410 "src [%08x], len [%d*4], dst [%x:%08x]\n"
411 "comp_addr [%x:%08x], comp_val 0x%08x\n",
412 dmae->opcode, dmae->src_addr_lo >> 2,
413 dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo,
414 dmae->comp_addr_hi, dmae->comp_addr_lo,
417 case DMAE_CMD_DST_GRC:
418 if (src_type == DMAE_CMD_SRC_PCI)
419 DP(msglvl, "DMAE: opcode 0x%08x\n"
420 "src [%x:%08x], len [%d*4], dst_addr [%08x]\n"
421 "comp_addr [%x:%08x], comp_val 0x%08x\n",
422 dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
423 dmae->len, dmae->dst_addr_lo >> 2,
424 dmae->comp_addr_hi, dmae->comp_addr_lo,
427 DP(msglvl, "DMAE: opcode 0x%08x\n"
428 "src [%08x], len [%d*4], dst [%08x]\n"
429 "comp_addr [%x:%08x], comp_val 0x%08x\n",
430 dmae->opcode, dmae->src_addr_lo >> 2,
431 dmae->len, dmae->dst_addr_lo >> 2,
432 dmae->comp_addr_hi, dmae->comp_addr_lo,
436 if (src_type == DMAE_CMD_SRC_PCI)
437 DP(msglvl, "DMAE: opcode 0x%08x\n"
438 "src_addr [%x:%08x] len [%d * 4] dst_addr [none]\n"
439 "comp_addr [%x:%08x] comp_val 0x%08x\n",
440 dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
441 dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo,
444 DP(msglvl, "DMAE: opcode 0x%08x\n"
445 "src_addr [%08x] len [%d * 4] dst_addr [none]\n"
446 "comp_addr [%x:%08x] comp_val 0x%08x\n",
447 dmae->opcode, dmae->src_addr_lo >> 2,
448 dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo,
453 for (i = 0; i < (sizeof(struct dmae_command)/4); i++)
454 DP(msglvl, "DMAE RAW [%02d]: 0x%08x\n",
455 i, *(((u32 *)dmae) + i));
458 /* copy command into DMAE command memory and set DMAE command go */
459 void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx)
464 cmd_offset = (DMAE_REG_CMD_MEM + sizeof(struct dmae_command) * idx);
465 for (i = 0; i < (sizeof(struct dmae_command)/4); i++) {
466 REG_WR(bp, cmd_offset + i*4, *(((u32 *)dmae) + i));
468 REG_WR(bp, dmae_reg_go_c[idx], 1);
471 u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type)
473 return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) |
477 u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode)
479 return opcode & ~DMAE_CMD_SRC_RESET;
482 u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type,
483 bool with_comp, u8 comp_type)
487 opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) |
488 (dst_type << DMAE_COMMAND_DST_SHIFT));
490 opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET);
492 opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
493 opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) |
494 (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT));
495 opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
498 opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP;
500 opcode |= DMAE_CMD_ENDIANITY_DW_SWAP;
503 opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type);
507 void bnx2x_prep_dmae_with_comp(struct bnx2x *bp,
508 struct dmae_command *dmae,
509 u8 src_type, u8 dst_type)
511 memset(dmae, 0, sizeof(struct dmae_command));
514 dmae->opcode = bnx2x_dmae_opcode(bp, src_type, dst_type,
515 true, DMAE_COMP_PCI);
517 /* fill in the completion parameters */
518 dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp));
519 dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp));
520 dmae->comp_val = DMAE_COMP_VAL;
523 /* issue a dmae command over the init-channel and wait for completion */
524 int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
527 int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000;
530 bnx2x_dp_dmae(bp, dmae, BNX2X_MSG_DMAE);
532 /* Lock the dmae channel. Disable BHs to prevent a dead-lock
533 * as long as this code is called both from syscall context and
534 * from ndo_set_rx_mode() flow that may be called from BH.
537 spin_lock_bh(&bp->dmae_lock);
539 /* reset completion */
542 /* post the command on the channel used for initializations */
543 bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp));
545 /* wait for completion */
547 while ((*comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
550 (bp->recovery_state != BNX2X_RECOVERY_DONE &&
551 bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) {
552 BNX2X_ERR("DMAE timeout!\n");
559 if (*comp & DMAE_PCI_ERR_FLAG) {
560 BNX2X_ERR("DMAE PCI error!\n");
566 spin_unlock_bh(&bp->dmae_lock);
571 void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
575 struct dmae_command dmae;
577 if (!bp->dmae_ready) {
578 u32 *data = bnx2x_sp(bp, wb_data[0]);
581 bnx2x_init_ind_wr(bp, dst_addr, data, len32);
583 bnx2x_init_str_wr(bp, dst_addr, data, len32);
587 /* set opcode and fixed command fields */
588 bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC);
590 /* fill in addresses and len */
591 dmae.src_addr_lo = U64_LO(dma_addr);
592 dmae.src_addr_hi = U64_HI(dma_addr);
593 dmae.dst_addr_lo = dst_addr >> 2;
594 dmae.dst_addr_hi = 0;
597 /* issue the command and wait for completion */
598 rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp));
600 BNX2X_ERR("DMAE returned failure %d\n", rc);
601 #ifdef BNX2X_STOP_ON_ERROR
607 void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
610 struct dmae_command dmae;
612 if (!bp->dmae_ready) {
613 u32 *data = bnx2x_sp(bp, wb_data[0]);
617 for (i = 0; i < len32; i++)
618 data[i] = bnx2x_reg_rd_ind(bp, src_addr + i*4);
620 for (i = 0; i < len32; i++)
621 data[i] = REG_RD(bp, src_addr + i*4);
626 /* set opcode and fixed command fields */
627 bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI);
629 /* fill in addresses and len */
630 dmae.src_addr_lo = src_addr >> 2;
631 dmae.src_addr_hi = 0;
632 dmae.dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_data));
633 dmae.dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_data));
636 /* issue the command and wait for completion */
637 rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp));
639 BNX2X_ERR("DMAE returned failure %d\n", rc);
640 #ifdef BNX2X_STOP_ON_ERROR
646 static void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
649 int dmae_wr_max = DMAE_LEN32_WR_MAX(bp);
652 while (len > dmae_wr_max) {
653 bnx2x_write_dmae(bp, phys_addr + offset,
654 addr + offset, dmae_wr_max);
655 offset += dmae_wr_max * 4;
659 bnx2x_write_dmae(bp, phys_addr + offset, addr + offset, len);
671 #define REGS_IN_ENTRY 4
673 static inline int bnx2x_get_assert_list_entry(struct bnx2x *bp,
679 return XSTORM_ASSERT_LIST_OFFSET(entry);
681 return TSTORM_ASSERT_LIST_OFFSET(entry);
683 return CSTORM_ASSERT_LIST_OFFSET(entry);
685 return USTORM_ASSERT_LIST_OFFSET(entry);
688 BNX2X_ERR("unknown storm\n");
693 static int bnx2x_mc_assert(struct bnx2x *bp)
698 u32 regs[REGS_IN_ENTRY];
699 u32 bar_storm_intmem[STORMS_NUM] = {
705 u32 storm_assert_list_index[STORMS_NUM] = {
706 XSTORM_ASSERT_LIST_INDEX_OFFSET,
707 TSTORM_ASSERT_LIST_INDEX_OFFSET,
708 CSTORM_ASSERT_LIST_INDEX_OFFSET,
709 USTORM_ASSERT_LIST_INDEX_OFFSET
711 char *storms_string[STORMS_NUM] = {
718 for (storm = XSTORM; storm < MAX_STORMS; storm++) {
719 last_idx = REG_RD8(bp, bar_storm_intmem[storm] +
720 storm_assert_list_index[storm]);
722 BNX2X_ERR("%s_ASSERT_LIST_INDEX 0x%x\n",
723 storms_string[storm], last_idx);
725 /* print the asserts */
726 for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
727 /* read a single assert entry */
728 for (j = 0; j < REGS_IN_ENTRY; j++)
729 regs[j] = REG_RD(bp, bar_storm_intmem[storm] +
730 bnx2x_get_assert_list_entry(bp,
735 /* log entry if it contains a valid assert */
736 if (regs[0] != COMMON_ASM_INVALID_ASSERT_OPCODE) {
737 BNX2X_ERR("%s_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
738 storms_string[storm], i, regs[3],
739 regs[2], regs[1], regs[0]);
747 BNX2X_ERR("Chip Revision: %s, FW Version: %d_%d_%d\n",
748 CHIP_IS_E1(bp) ? "everest1" :
749 CHIP_IS_E1H(bp) ? "everest1h" :
750 CHIP_IS_E2(bp) ? "everest2" : "everest3",
751 BCM_5710_FW_MAJOR_VERSION,
752 BCM_5710_FW_MINOR_VERSION,
753 BCM_5710_FW_REVISION_VERSION);
758 #define MCPR_TRACE_BUFFER_SIZE (0x800)
759 #define SCRATCH_BUFFER_SIZE(bp) \
760 (CHIP_IS_E1(bp) ? 0x10000 : (CHIP_IS_E1H(bp) ? 0x20000 : 0x28000))
762 void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl)
768 u32 trace_shmem_base;
770 BNX2X_ERR("NO MCP - can not dump\n");
773 netdev_printk(lvl, bp->dev, "bc %d.%d.%d\n",
774 (bp->common.bc_ver & 0xff0000) >> 16,
775 (bp->common.bc_ver & 0xff00) >> 8,
776 (bp->common.bc_ver & 0xff));
778 val = REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER);
779 if (val == REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER))
780 BNX2X_ERR("%s" "MCP PC at 0x%x\n", lvl, val);
782 if (BP_PATH(bp) == 0)
783 trace_shmem_base = bp->common.shmem_base;
785 trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr);
788 if (trace_shmem_base < MCPR_SCRATCH_BASE(bp) + MCPR_TRACE_BUFFER_SIZE ||
789 trace_shmem_base >= MCPR_SCRATCH_BASE(bp) +
790 SCRATCH_BUFFER_SIZE(bp)) {
791 BNX2X_ERR("Unable to dump trace buffer (mark %x)\n",
796 addr = trace_shmem_base - MCPR_TRACE_BUFFER_SIZE;
798 /* validate TRCB signature */
799 mark = REG_RD(bp, addr);
800 if (mark != MFW_TRACE_SIGNATURE) {
801 BNX2X_ERR("Trace buffer signature is missing.");
805 /* read cyclic buffer pointer */
807 mark = REG_RD(bp, addr);
808 mark = MCPR_SCRATCH_BASE(bp) + ((mark + 0x3) & ~0x3) - 0x08000000;
809 if (mark >= trace_shmem_base || mark < addr + 4) {
810 BNX2X_ERR("Mark doesn't fall inside Trace Buffer\n");
813 printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark);
817 /* dump buffer after the mark */
818 for (offset = mark; offset < trace_shmem_base; offset += 0x8*4) {
819 for (word = 0; word < 8; word++)
820 data[word] = htonl(REG_RD(bp, offset + 4*word));
822 pr_cont("%s", (char *)data);
825 /* dump buffer before the mark */
826 for (offset = addr + 4; offset <= mark; offset += 0x8*4) {
827 for (word = 0; word < 8; word++)
828 data[word] = htonl(REG_RD(bp, offset + 4*word));
830 pr_cont("%s", (char *)data);
832 printk("%s" "end of fw dump\n", lvl);
835 static void bnx2x_fw_dump(struct bnx2x *bp)
837 bnx2x_fw_dump_lvl(bp, KERN_ERR);
840 static void bnx2x_hc_int_disable(struct bnx2x *bp)
842 int port = BP_PORT(bp);
843 u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
844 u32 val = REG_RD(bp, addr);
846 /* in E1 we must use only PCI configuration space to disable
847 * MSI/MSIX capability
848 * It's forbidden to disable IGU_PF_CONF_MSI_MSIX_EN in HC block
850 if (CHIP_IS_E1(bp)) {
851 /* Since IGU_PF_CONF_MSI_MSIX_EN still always on
852 * Use mask register to prevent from HC sending interrupts
853 * after we exit the function
855 REG_WR(bp, HC_REG_INT_MASK + port*4, 0);
857 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
858 HC_CONFIG_0_REG_INT_LINE_EN_0 |
859 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
861 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
862 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
863 HC_CONFIG_0_REG_INT_LINE_EN_0 |
864 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
867 "write %x to HC %d (addr 0x%x)\n",
870 /* flush all outstanding writes */
873 REG_WR(bp, addr, val);
874 if (REG_RD(bp, addr) != val)
875 BNX2X_ERR("BUG! Proper val not read from IGU!\n");
878 static void bnx2x_igu_int_disable(struct bnx2x *bp)
880 u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
882 val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
883 IGU_PF_CONF_INT_LINE_EN |
884 IGU_PF_CONF_ATTN_BIT_EN);
886 DP(NETIF_MSG_IFDOWN, "write %x to IGU\n", val);
888 /* flush all outstanding writes */
891 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
892 if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val)
893 BNX2X_ERR("BUG! Proper val not read from IGU!\n");
896 static void bnx2x_int_disable(struct bnx2x *bp)
898 if (bp->common.int_block == INT_BLOCK_HC)
899 bnx2x_hc_int_disable(bp);
901 bnx2x_igu_int_disable(bp);
904 void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int)
908 struct hc_sp_status_block_data sp_sb_data;
909 int func = BP_FUNC(bp);
910 #ifdef BNX2X_STOP_ON_ERROR
911 u16 start = 0, end = 0;
914 if (IS_PF(bp) && disable_int)
915 bnx2x_int_disable(bp);
917 bp->stats_state = STATS_STATE_DISABLED;
918 bp->eth_stats.unrecoverable_error++;
919 DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
921 BNX2X_ERR("begin crash dump -----------------\n");
926 struct host_sp_status_block *def_sb = bp->def_status_blk;
927 int data_size, cstorm_offset;
929 BNX2X_ERR("def_idx(0x%x) def_att_idx(0x%x) attn_state(0x%x) spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n",
930 bp->def_idx, bp->def_att_idx, bp->attn_state,
931 bp->spq_prod_idx, bp->stats_counter);
932 BNX2X_ERR("DSB: attn bits(0x%x) ack(0x%x) id(0x%x) idx(0x%x)\n",
933 def_sb->atten_status_block.attn_bits,
934 def_sb->atten_status_block.attn_bits_ack,
935 def_sb->atten_status_block.status_block_id,
936 def_sb->atten_status_block.attn_bits_index);
938 for (i = 0; i < HC_SP_SB_MAX_INDICES; i++)
940 def_sb->sp_sb.index_values[i],
941 (i == HC_SP_SB_MAX_INDICES - 1) ? ") " : " ");
943 data_size = sizeof(struct hc_sp_status_block_data) /
945 cstorm_offset = CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func);
946 for (i = 0; i < data_size; i++)
947 *((u32 *)&sp_sb_data + i) =
948 REG_RD(bp, BAR_CSTRORM_INTMEM + cstorm_offset +
951 pr_cont("igu_sb_id(0x%x) igu_seg_id(0x%x) pf_id(0x%x) vnic_id(0x%x) vf_id(0x%x) vf_valid (0x%x) state(0x%x)\n",
952 sp_sb_data.igu_sb_id,
953 sp_sb_data.igu_seg_id,
954 sp_sb_data.p_func.pf_id,
955 sp_sb_data.p_func.vnic_id,
956 sp_sb_data.p_func.vf_id,
957 sp_sb_data.p_func.vf_valid,
961 for_each_eth_queue(bp, i) {
962 struct bnx2x_fastpath *fp = &bp->fp[i];
964 struct hc_status_block_data_e2 sb_data_e2;
965 struct hc_status_block_data_e1x sb_data_e1x;
966 struct hc_status_block_sm *hc_sm_p =
968 sb_data_e1x.common.state_machine :
969 sb_data_e2.common.state_machine;
970 struct hc_index_data *hc_index_p =
972 sb_data_e1x.index_data :
973 sb_data_e2.index_data;
976 struct bnx2x_fp_txdata txdata;
985 BNX2X_ERR("fp%d: rx_bd_prod(0x%x) rx_bd_cons(0x%x) rx_comp_prod(0x%x) rx_comp_cons(0x%x) *rx_cons_sb(0x%x)\n",
986 i, fp->rx_bd_prod, fp->rx_bd_cons,
988 fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb));
989 BNX2X_ERR(" rx_sge_prod(0x%x) last_max_sge(0x%x) fp_hc_idx(0x%x)\n",
990 fp->rx_sge_prod, fp->last_max_sge,
991 le16_to_cpu(fp->fp_hc_idx));
994 for_each_cos_in_tx_queue(fp, cos)
996 if (!fp->txdata_ptr[cos])
999 txdata = *fp->txdata_ptr[cos];
1001 if (!txdata.tx_cons_sb)
1004 BNX2X_ERR("fp%d: tx_pkt_prod(0x%x) tx_pkt_cons(0x%x) tx_bd_prod(0x%x) tx_bd_cons(0x%x) *tx_cons_sb(0x%x)\n",
1005 i, txdata.tx_pkt_prod,
1006 txdata.tx_pkt_cons, txdata.tx_bd_prod,
1008 le16_to_cpu(*txdata.tx_cons_sb));
1011 loop = CHIP_IS_E1x(bp) ?
1012 HC_SB_MAX_INDICES_E1X : HC_SB_MAX_INDICES_E2;
1019 BNX2X_ERR(" run indexes (");
1020 for (j = 0; j < HC_SB_MAX_SM; j++)
1022 fp->sb_running_index[j],
1023 (j == HC_SB_MAX_SM - 1) ? ")" : " ");
1025 BNX2X_ERR(" indexes (");
1026 for (j = 0; j < loop; j++)
1028 fp->sb_index_values[j],
1029 (j == loop - 1) ? ")" : " ");
1031 /* VF cannot access FW refelection for status block */
1036 data_size = CHIP_IS_E1x(bp) ?
1037 sizeof(struct hc_status_block_data_e1x) :
1038 sizeof(struct hc_status_block_data_e2);
1039 data_size /= sizeof(u32);
1040 sb_data_p = CHIP_IS_E1x(bp) ?
1041 (u32 *)&sb_data_e1x :
1043 /* copy sb data in here */
1044 for (j = 0; j < data_size; j++)
1045 *(sb_data_p + j) = REG_RD(bp, BAR_CSTRORM_INTMEM +
1046 CSTORM_STATUS_BLOCK_DATA_OFFSET(fp->fw_sb_id) +
1049 if (!CHIP_IS_E1x(bp)) {
1050 pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n",
1051 sb_data_e2.common.p_func.pf_id,
1052 sb_data_e2.common.p_func.vf_id,
1053 sb_data_e2.common.p_func.vf_valid,
1054 sb_data_e2.common.p_func.vnic_id,
1055 sb_data_e2.common.same_igu_sb_1b,
1056 sb_data_e2.common.state);
1058 pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n",
1059 sb_data_e1x.common.p_func.pf_id,
1060 sb_data_e1x.common.p_func.vf_id,
1061 sb_data_e1x.common.p_func.vf_valid,
1062 sb_data_e1x.common.p_func.vnic_id,
1063 sb_data_e1x.common.same_igu_sb_1b,
1064 sb_data_e1x.common.state);
1068 for (j = 0; j < HC_SB_MAX_SM; j++) {
1069 pr_cont("SM[%d] __flags (0x%x) igu_sb_id (0x%x) igu_seg_id(0x%x) time_to_expire (0x%x) timer_value(0x%x)\n",
1070 j, hc_sm_p[j].__flags,
1071 hc_sm_p[j].igu_sb_id,
1072 hc_sm_p[j].igu_seg_id,
1073 hc_sm_p[j].time_to_expire,
1074 hc_sm_p[j].timer_value);
1078 for (j = 0; j < loop; j++) {
1079 pr_cont("INDEX[%d] flags (0x%x) timeout (0x%x)\n", j,
1080 hc_index_p[j].flags,
1081 hc_index_p[j].timeout);
1085 #ifdef BNX2X_STOP_ON_ERROR
1088 BNX2X_ERR("eq cons %x prod %x\n", bp->eq_cons, bp->eq_prod);
1089 for (i = 0; i < NUM_EQ_DESC; i++) {
1090 u32 *data = (u32 *)&bp->eq_ring[i].message.data;
1092 BNX2X_ERR("event queue [%d]: header: opcode %d, error %d\n",
1093 i, bp->eq_ring[i].message.opcode,
1094 bp->eq_ring[i].message.error);
1095 BNX2X_ERR("data: %x %x %x\n",
1096 data[0], data[1], data[2]);
1102 for_each_valid_rx_queue(bp, i) {
1103 struct bnx2x_fastpath *fp = &bp->fp[i];
1108 if (!fp->rx_cons_sb)
1111 start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10);
1112 end = RX_BD(le16_to_cpu(*fp->rx_cons_sb) + 503);
1113 for (j = start; j != end; j = RX_BD(j + 1)) {
1114 u32 *rx_bd = (u32 *)&fp->rx_desc_ring[j];
1115 struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j];
1117 BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x] sw_bd=[%p]\n",
1118 i, j, rx_bd[1], rx_bd[0], sw_bd->data);
1121 start = RX_SGE(fp->rx_sge_prod);
1122 end = RX_SGE(fp->last_max_sge);
1123 for (j = start; j != end; j = RX_SGE(j + 1)) {
1124 u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j];
1125 struct sw_rx_page *sw_page = &fp->rx_page_ring[j];
1127 BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x] sw_page=[%p]\n",
1128 i, j, rx_sge[1], rx_sge[0], sw_page->page);
1131 start = RCQ_BD(fp->rx_comp_cons - 10);
1132 end = RCQ_BD(fp->rx_comp_cons + 503);
1133 for (j = start; j != end; j = RCQ_BD(j + 1)) {
1134 u32 *cqe = (u32 *)&fp->rx_comp_ring[j];
1136 BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n",
1137 i, j, cqe[0], cqe[1], cqe[2], cqe[3]);
1142 for_each_valid_tx_queue(bp, i) {
1143 struct bnx2x_fastpath *fp = &bp->fp[i];
1148 for_each_cos_in_tx_queue(fp, cos) {
1149 struct bnx2x_fp_txdata *txdata = fp->txdata_ptr[cos];
1151 if (!fp->txdata_ptr[cos])
1154 if (!txdata->tx_cons_sb)
1157 start = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) - 10);
1158 end = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) + 245);
1159 for (j = start; j != end; j = TX_BD(j + 1)) {
1160 struct sw_tx_bd *sw_bd =
1161 &txdata->tx_buf_ring[j];
1163 BNX2X_ERR("fp%d: txdata %d, packet[%x]=[%p,%x]\n",
1164 i, cos, j, sw_bd->skb,
1168 start = TX_BD(txdata->tx_bd_cons - 10);
1169 end = TX_BD(txdata->tx_bd_cons + 254);
1170 for (j = start; j != end; j = TX_BD(j + 1)) {
1171 u32 *tx_bd = (u32 *)&txdata->tx_desc_ring[j];
1173 BNX2X_ERR("fp%d: txdata %d, tx_bd[%x]=[%x:%x:%x:%x]\n",
1174 i, cos, j, tx_bd[0], tx_bd[1],
1175 tx_bd[2], tx_bd[3]);
1182 bnx2x_mc_assert(bp);
1184 BNX2X_ERR("end crash dump -----------------\n");
1188 * FLR Support for E2
1190 * bnx2x_pf_flr_clnup() is called during nic_load in the per function HW
1193 #define FLR_WAIT_USEC 10000 /* 10 milliseconds */
1194 #define FLR_WAIT_INTERVAL 50 /* usec */
1195 #define FLR_POLL_CNT (FLR_WAIT_USEC/FLR_WAIT_INTERVAL) /* 200 */
1197 struct pbf_pN_buf_regs {
1204 struct pbf_pN_cmd_regs {
1210 static void bnx2x_pbf_pN_buf_flushed(struct bnx2x *bp,
1211 struct pbf_pN_buf_regs *regs,
1214 u32 init_crd, crd, crd_start, crd_freed, crd_freed_start;
1215 u32 cur_cnt = poll_count;
1217 crd_freed = crd_freed_start = REG_RD(bp, regs->crd_freed);
1218 crd = crd_start = REG_RD(bp, regs->crd);
1219 init_crd = REG_RD(bp, regs->init_crd);
1221 DP(BNX2X_MSG_SP, "INIT CREDIT[%d] : %x\n", regs->pN, init_crd);
1222 DP(BNX2X_MSG_SP, "CREDIT[%d] : s:%x\n", regs->pN, crd);
1223 DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: s:%x\n", regs->pN, crd_freed);
1225 while ((crd != init_crd) && ((u32)SUB_S32(crd_freed, crd_freed_start) <
1226 (init_crd - crd_start))) {
1228 udelay(FLR_WAIT_INTERVAL);
1229 crd = REG_RD(bp, regs->crd);
1230 crd_freed = REG_RD(bp, regs->crd_freed);
1232 DP(BNX2X_MSG_SP, "PBF tx buffer[%d] timed out\n",
1234 DP(BNX2X_MSG_SP, "CREDIT[%d] : c:%x\n",
1236 DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: c:%x\n",
1237 regs->pN, crd_freed);
1241 DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF tx buffer[%d]\n",
1242 poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN);
1245 static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x *bp,
1246 struct pbf_pN_cmd_regs *regs,
1249 u32 occup, to_free, freed, freed_start;
1250 u32 cur_cnt = poll_count;
1252 occup = to_free = REG_RD(bp, regs->lines_occup);
1253 freed = freed_start = REG_RD(bp, regs->lines_freed);
1255 DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n", regs->pN, occup);
1256 DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", regs->pN, freed);
1258 while (occup && ((u32)SUB_S32(freed, freed_start) < to_free)) {
1260 udelay(FLR_WAIT_INTERVAL);
1261 occup = REG_RD(bp, regs->lines_occup);
1262 freed = REG_RD(bp, regs->lines_freed);
1264 DP(BNX2X_MSG_SP, "PBF cmd queue[%d] timed out\n",
1266 DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n",
1268 DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n",
1273 DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF cmd queue[%d]\n",
1274 poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN);
1277 static u32 bnx2x_flr_clnup_reg_poll(struct bnx2x *bp, u32 reg,
1278 u32 expected, u32 poll_count)
1280 u32 cur_cnt = poll_count;
1283 while ((val = REG_RD(bp, reg)) != expected && cur_cnt--)
1284 udelay(FLR_WAIT_INTERVAL);
1289 int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg,
1290 char *msg, u32 poll_cnt)
1292 u32 val = bnx2x_flr_clnup_reg_poll(bp, reg, 0, poll_cnt);
1294 BNX2X_ERR("%s usage count=%d\n", msg, val);
1300 /* Common routines with VF FLR cleanup */
1301 u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp)
1303 /* adjust polling timeout */
1304 if (CHIP_REV_IS_EMUL(bp))
1305 return FLR_POLL_CNT * 2000;
1307 if (CHIP_REV_IS_FPGA(bp))
1308 return FLR_POLL_CNT * 120;
1310 return FLR_POLL_CNT;
1313 void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count)
1315 struct pbf_pN_cmd_regs cmd_regs[] = {
1316 {0, (CHIP_IS_E3B0(bp)) ?
1317 PBF_REG_TQ_OCCUPANCY_Q0 :
1318 PBF_REG_P0_TQ_OCCUPANCY,
1319 (CHIP_IS_E3B0(bp)) ?
1320 PBF_REG_TQ_LINES_FREED_CNT_Q0 :
1321 PBF_REG_P0_TQ_LINES_FREED_CNT},
1322 {1, (CHIP_IS_E3B0(bp)) ?
1323 PBF_REG_TQ_OCCUPANCY_Q1 :
1324 PBF_REG_P1_TQ_OCCUPANCY,
1325 (CHIP_IS_E3B0(bp)) ?
1326 PBF_REG_TQ_LINES_FREED_CNT_Q1 :
1327 PBF_REG_P1_TQ_LINES_FREED_CNT},
1328 {4, (CHIP_IS_E3B0(bp)) ?
1329 PBF_REG_TQ_OCCUPANCY_LB_Q :
1330 PBF_REG_P4_TQ_OCCUPANCY,
1331 (CHIP_IS_E3B0(bp)) ?
1332 PBF_REG_TQ_LINES_FREED_CNT_LB_Q :
1333 PBF_REG_P4_TQ_LINES_FREED_CNT}
1336 struct pbf_pN_buf_regs buf_regs[] = {
1337 {0, (CHIP_IS_E3B0(bp)) ?
1338 PBF_REG_INIT_CRD_Q0 :
1339 PBF_REG_P0_INIT_CRD ,
1340 (CHIP_IS_E3B0(bp)) ?
1343 (CHIP_IS_E3B0(bp)) ?
1344 PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 :
1345 PBF_REG_P0_INTERNAL_CRD_FREED_CNT},
1346 {1, (CHIP_IS_E3B0(bp)) ?
1347 PBF_REG_INIT_CRD_Q1 :
1348 PBF_REG_P1_INIT_CRD,
1349 (CHIP_IS_E3B0(bp)) ?
1352 (CHIP_IS_E3B0(bp)) ?
1353 PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 :
1354 PBF_REG_P1_INTERNAL_CRD_FREED_CNT},
1355 {4, (CHIP_IS_E3B0(bp)) ?
1356 PBF_REG_INIT_CRD_LB_Q :
1357 PBF_REG_P4_INIT_CRD,
1358 (CHIP_IS_E3B0(bp)) ?
1359 PBF_REG_CREDIT_LB_Q :
1361 (CHIP_IS_E3B0(bp)) ?
1362 PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q :
1363 PBF_REG_P4_INTERNAL_CRD_FREED_CNT},
1368 /* Verify the command queues are flushed P0, P1, P4 */
1369 for (i = 0; i < ARRAY_SIZE(cmd_regs); i++)
1370 bnx2x_pbf_pN_cmd_flushed(bp, &cmd_regs[i], poll_count);
1372 /* Verify the transmission buffers are flushed P0, P1, P4 */
1373 for (i = 0; i < ARRAY_SIZE(buf_regs); i++)
1374 bnx2x_pbf_pN_buf_flushed(bp, &buf_regs[i], poll_count);
1377 #define OP_GEN_PARAM(param) \
1378 (((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
1380 #define OP_GEN_TYPE(type) \
1381 (((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
1383 #define OP_GEN_AGG_VECT(index) \
1384 (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)
1386 int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt)
1388 u32 op_gen_command = 0;
1389 u32 comp_addr = BAR_CSTRORM_INTMEM +
1390 CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func);
1393 if (REG_RD(bp, comp_addr)) {
1394 BNX2X_ERR("Cleanup complete was not 0 before sending\n");
1398 op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX);
1399 op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE);
1400 op_gen_command |= OP_GEN_AGG_VECT(clnup_func);
1401 op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT;
1403 DP(BNX2X_MSG_SP, "sending FW Final cleanup\n");
1404 REG_WR(bp, XSDM_REG_OPERATION_GEN, op_gen_command);
1406 if (bnx2x_flr_clnup_reg_poll(bp, comp_addr, 1, poll_cnt) != 1) {
1407 BNX2X_ERR("FW final cleanup did not succeed\n");
1408 DP(BNX2X_MSG_SP, "At timeout completion address contained %x\n",
1409 (REG_RD(bp, comp_addr)));
1413 /* Zero completion for next FLR */
1414 REG_WR(bp, comp_addr, 0);
1419 u8 bnx2x_is_pcie_pending(struct pci_dev *dev)
1423 pcie_capability_read_word(dev, PCI_EXP_DEVSTA, &status);
1424 return status & PCI_EXP_DEVSTA_TRPND;
1427 /* PF FLR specific routines
1429 static int bnx2x_poll_hw_usage_counters(struct bnx2x *bp, u32 poll_cnt)
1431 /* wait for CFC PF usage-counter to zero (includes all the VFs) */
1432 if (bnx2x_flr_clnup_poll_hw_counter(bp,
1433 CFC_REG_NUM_LCIDS_INSIDE_PF,
1434 "CFC PF usage counter timed out",
1438 /* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
1439 if (bnx2x_flr_clnup_poll_hw_counter(bp,
1440 DORQ_REG_PF_USAGE_CNT,
1441 "DQ PF usage counter timed out",
1445 /* Wait for QM PF usage-counter to zero (until DQ cleanup) */
1446 if (bnx2x_flr_clnup_poll_hw_counter(bp,
1447 QM_REG_PF_USG_CNT_0 + 4*BP_FUNC(bp),
1448 "QM PF usage counter timed out",
1452 /* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
1453 if (bnx2x_flr_clnup_poll_hw_counter(bp,
1454 TM_REG_LIN0_VNIC_UC + 4*BP_PORT(bp),
1455 "Timers VNIC usage counter timed out",
1458 if (bnx2x_flr_clnup_poll_hw_counter(bp,
1459 TM_REG_LIN0_NUM_SCANS + 4*BP_PORT(bp),
1460 "Timers NUM_SCANS usage counter timed out",
1464 /* Wait DMAE PF usage counter to zero */
1465 if (bnx2x_flr_clnup_poll_hw_counter(bp,
1466 dmae_reg_go_c[INIT_DMAE_C(bp)],
1467 "DMAE command register timed out",
1474 static void bnx2x_hw_enable_status(struct bnx2x *bp)
1478 val = REG_RD(bp, CFC_REG_WEAK_ENABLE_PF);
1479 DP(BNX2X_MSG_SP, "CFC_REG_WEAK_ENABLE_PF is 0x%x\n", val);
1481 val = REG_RD(bp, PBF_REG_DISABLE_PF);
1482 DP(BNX2X_MSG_SP, "PBF_REG_DISABLE_PF is 0x%x\n", val);
1484 val = REG_RD(bp, IGU_REG_PCI_PF_MSI_EN);
1485 DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSI_EN is 0x%x\n", val);
1487 val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_EN);
1488 DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_EN is 0x%x\n", val);
1490 val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_FUNC_MASK);
1491 DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x\n", val);
1493 val = REG_RD(bp, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR);
1494 DP(BNX2X_MSG_SP, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x\n", val);
1496 val = REG_RD(bp, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR);
1497 DP(BNX2X_MSG_SP, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x\n", val);
1499 val = REG_RD(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER);
1500 DP(BNX2X_MSG_SP, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x\n",
1504 static int bnx2x_pf_flr_clnup(struct bnx2x *bp)
1506 u32 poll_cnt = bnx2x_flr_clnup_poll_count(bp);
1508 DP(BNX2X_MSG_SP, "Cleanup after FLR PF[%d]\n", BP_ABS_FUNC(bp));
1510 /* Re-enable PF target read access */
1511 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
1513 /* Poll HW usage counters */
1514 DP(BNX2X_MSG_SP, "Polling usage counters\n");
1515 if (bnx2x_poll_hw_usage_counters(bp, poll_cnt))
1518 /* Zero the igu 'trailing edge' and 'leading edge' */
1520 /* Send the FW cleanup command */
1521 if (bnx2x_send_final_clnup(bp, (u8)BP_FUNC(bp), poll_cnt))
1526 /* Verify TX hw is flushed */
1527 bnx2x_tx_hw_flushed(bp, poll_cnt);
1529 /* Wait 100ms (not adjusted according to platform) */
1532 /* Verify no pending pci transactions */
1533 if (bnx2x_is_pcie_pending(bp->pdev))
1534 BNX2X_ERR("PCIE Transactions still pending\n");
1537 bnx2x_hw_enable_status(bp);
1540 * Master enable - Due to WB DMAE writes performed before this
1541 * register is re-initialized as part of the regular function init
1543 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
1548 static void bnx2x_hc_int_enable(struct bnx2x *bp)
1550 int port = BP_PORT(bp);
1551 u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
1552 u32 val = REG_RD(bp, addr);
1553 bool msix = (bp->flags & USING_MSIX_FLAG) ? true : false;
1554 bool single_msix = (bp->flags & USING_SINGLE_MSIX_FLAG) ? true : false;
1555 bool msi = (bp->flags & USING_MSI_FLAG) ? true : false;
1558 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
1559 HC_CONFIG_0_REG_INT_LINE_EN_0);
1560 val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
1561 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
1563 val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0;
1565 val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
1566 val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
1567 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
1568 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
1570 val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
1571 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
1572 HC_CONFIG_0_REG_INT_LINE_EN_0 |
1573 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
1575 if (!CHIP_IS_E1(bp)) {
1577 "write %x to HC %d (addr 0x%x)\n", val, port, addr);
1579 REG_WR(bp, addr, val);
1581 val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
1586 REG_WR(bp, HC_REG_INT_MASK + port*4, 0x1FFFF);
1589 "write %x to HC %d (addr 0x%x) mode %s\n", val, port, addr,
1590 (msix ? "MSI-X" : (msi ? "MSI" : "INTx")));
1592 REG_WR(bp, addr, val);
1594 * Ensure that HC_CONFIG is written before leading/trailing edge config
1599 if (!CHIP_IS_E1(bp)) {
1600 /* init leading/trailing edge */
1602 val = (0xee0f | (1 << (BP_VN(bp) + 4)));
1604 /* enable nig and gpio3 attention */
1609 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
1610 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
1613 /* Make sure that interrupts are indeed enabled from here on */
1617 static void bnx2x_igu_int_enable(struct bnx2x *bp)
1620 bool msix = (bp->flags & USING_MSIX_FLAG) ? true : false;
1621 bool single_msix = (bp->flags & USING_SINGLE_MSIX_FLAG) ? true : false;
1622 bool msi = (bp->flags & USING_MSI_FLAG) ? true : false;
1624 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
1627 val &= ~(IGU_PF_CONF_INT_LINE_EN |
1628 IGU_PF_CONF_SINGLE_ISR_EN);
1629 val |= (IGU_PF_CONF_MSI_MSIX_EN |
1630 IGU_PF_CONF_ATTN_BIT_EN);
1633 val |= IGU_PF_CONF_SINGLE_ISR_EN;
1635 val &= ~IGU_PF_CONF_INT_LINE_EN;
1636 val |= (IGU_PF_CONF_MSI_MSIX_EN |
1637 IGU_PF_CONF_ATTN_BIT_EN |
1638 IGU_PF_CONF_SINGLE_ISR_EN);
1640 val &= ~IGU_PF_CONF_MSI_MSIX_EN;
1641 val |= (IGU_PF_CONF_INT_LINE_EN |
1642 IGU_PF_CONF_ATTN_BIT_EN |
1643 IGU_PF_CONF_SINGLE_ISR_EN);
1646 /* Clean previous status - need to configure igu prior to ack*/
1647 if ((!msix) || single_msix) {
1648 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
1652 val |= IGU_PF_CONF_FUNC_EN;
1654 DP(NETIF_MSG_IFUP, "write 0x%x to IGU mode %s\n",
1655 val, (msix ? "MSI-X" : (msi ? "MSI" : "INTx")));
1657 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
1659 if (val & IGU_PF_CONF_INT_LINE_EN)
1660 pci_intx(bp->pdev, true);
1664 /* init leading/trailing edge */
1666 val = (0xee0f | (1 << (BP_VN(bp) + 4)));
1668 /* enable nig and gpio3 attention */
1673 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val);
1674 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val);
1676 /* Make sure that interrupts are indeed enabled from here on */
1680 void bnx2x_int_enable(struct bnx2x *bp)
1682 if (bp->common.int_block == INT_BLOCK_HC)
1683 bnx2x_hc_int_enable(bp);
1685 bnx2x_igu_int_enable(bp);
1688 void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw)
1690 int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
1694 /* prevent the HW from sending interrupts */
1695 bnx2x_int_disable(bp);
1697 /* make sure all ISRs are done */
1699 synchronize_irq(bp->msix_table[0].vector);
1701 if (CNIC_SUPPORT(bp))
1703 for_each_eth_queue(bp, i)
1704 synchronize_irq(bp->msix_table[offset++].vector);
1706 synchronize_irq(bp->pdev->irq);
1708 /* make sure sp_task is not running */
1709 cancel_delayed_work(&bp->sp_task);
1710 cancel_delayed_work(&bp->period_task);
1711 flush_workqueue(bnx2x_wq);
1717 * General service functions
1720 /* Return true if succeeded to acquire the lock */
1721 static bool bnx2x_trylock_hw_lock(struct bnx2x *bp, u32 resource)
1724 u32 resource_bit = (1 << resource);
1725 int func = BP_FUNC(bp);
1726 u32 hw_lock_control_reg;
1728 DP(NETIF_MSG_HW | NETIF_MSG_IFUP,
1729 "Trying to take a lock on resource %d\n", resource);
1731 /* Validating that the resource is within range */
1732 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
1733 DP(NETIF_MSG_HW | NETIF_MSG_IFUP,
1734 "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
1735 resource, HW_LOCK_MAX_RESOURCE_VALUE);
1740 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
1742 hw_lock_control_reg =
1743 (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
1745 /* Try to acquire the lock */
1746 REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
1747 lock_status = REG_RD(bp, hw_lock_control_reg);
1748 if (lock_status & resource_bit)
1751 DP(NETIF_MSG_HW | NETIF_MSG_IFUP,
1752 "Failed to get a lock on resource %d\n", resource);
1757 * bnx2x_get_leader_lock_resource - get the recovery leader resource id
1759 * @bp: driver handle
1761 * Returns the recovery leader resource id according to the engine this function
1762 * belongs to. Currently only only 2 engines is supported.
1764 static int bnx2x_get_leader_lock_resource(struct bnx2x *bp)
1767 return HW_LOCK_RESOURCE_RECOVERY_LEADER_1;
1769 return HW_LOCK_RESOURCE_RECOVERY_LEADER_0;
1773 * bnx2x_trylock_leader_lock- try to acquire a leader lock.
1775 * @bp: driver handle
1777 * Tries to acquire a leader lock for current engine.
1779 static bool bnx2x_trylock_leader_lock(struct bnx2x *bp)
1781 return bnx2x_trylock_hw_lock(bp, bnx2x_get_leader_lock_resource(bp));
1784 static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err);
1786 /* schedule the sp task and mark that interrupt occurred (runs from ISR) */
1787 static int bnx2x_schedule_sp_task(struct bnx2x *bp)
1789 /* Set the interrupt occurred bit for the sp-task to recognize it
1790 * must ack the interrupt and transition according to the IGU
1793 atomic_set(&bp->interrupt_occurred, 1);
1795 /* The sp_task must execute only after this bit
1796 * is set, otherwise we will get out of sync and miss all
1797 * further interrupts. Hence, the barrier.
1801 /* schedule sp_task to workqueue */
1802 return queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
1805 void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe)
1807 struct bnx2x *bp = fp->bp;
1808 int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
1809 int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
1810 enum bnx2x_queue_cmd drv_cmd = BNX2X_Q_CMD_MAX;
1811 struct bnx2x_queue_sp_obj *q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
1814 "fp %d cid %d got ramrod #%d state is %x type is %d\n",
1815 fp->index, cid, command, bp->state,
1816 rr_cqe->ramrod_cqe.ramrod_type);
1818 /* If cid is within VF range, replace the slowpath object with the
1819 * one corresponding to this VF
1821 if (cid >= BNX2X_FIRST_VF_CID &&
1822 cid < BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS)
1823 bnx2x_iov_set_queue_sp_obj(bp, cid, &q_obj);
1826 case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE):
1827 DP(BNX2X_MSG_SP, "got UPDATE ramrod. CID %d\n", cid);
1828 drv_cmd = BNX2X_Q_CMD_UPDATE;
1831 case (RAMROD_CMD_ID_ETH_CLIENT_SETUP):
1832 DP(BNX2X_MSG_SP, "got MULTI[%d] setup ramrod\n", cid);
1833 drv_cmd = BNX2X_Q_CMD_SETUP;
1836 case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP):
1837 DP(BNX2X_MSG_SP, "got MULTI[%d] tx-only setup ramrod\n", cid);
1838 drv_cmd = BNX2X_Q_CMD_SETUP_TX_ONLY;
1841 case (RAMROD_CMD_ID_ETH_HALT):
1842 DP(BNX2X_MSG_SP, "got MULTI[%d] halt ramrod\n", cid);
1843 drv_cmd = BNX2X_Q_CMD_HALT;
1846 case (RAMROD_CMD_ID_ETH_TERMINATE):
1847 DP(BNX2X_MSG_SP, "got MULTI[%d] terminate ramrod\n", cid);
1848 drv_cmd = BNX2X_Q_CMD_TERMINATE;
1851 case (RAMROD_CMD_ID_ETH_EMPTY):
1852 DP(BNX2X_MSG_SP, "got MULTI[%d] empty ramrod\n", cid);
1853 drv_cmd = BNX2X_Q_CMD_EMPTY;
1856 case (RAMROD_CMD_ID_ETH_TPA_UPDATE):
1857 DP(BNX2X_MSG_SP, "got tpa update ramrod CID=%d\n", cid);
1858 drv_cmd = BNX2X_Q_CMD_UPDATE_TPA;
1862 BNX2X_ERR("unexpected MC reply (%d) on fp[%d]\n",
1863 command, fp->index);
1867 if ((drv_cmd != BNX2X_Q_CMD_MAX) &&
1868 q_obj->complete_cmd(bp, q_obj, drv_cmd))
1869 /* q_obj->complete_cmd() failure means that this was
1870 * an unexpected completion.
1872 * In this case we don't want to increase the bp->spq_left
1873 * because apparently we haven't sent this command the first
1876 #ifdef BNX2X_STOP_ON_ERROR
1882 smp_mb__before_atomic();
1883 atomic_inc(&bp->cq_spq_left);
1884 /* push the change in bp->spq_left and towards the memory */
1885 smp_mb__after_atomic();
1887 DP(BNX2X_MSG_SP, "bp->cq_spq_left %x\n", atomic_read(&bp->cq_spq_left));
1889 if ((drv_cmd == BNX2X_Q_CMD_UPDATE) && (IS_FCOE_FP(fp)) &&
1890 (!!test_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state))) {
1891 /* if Q update ramrod is completed for last Q in AFEX vif set
1892 * flow, then ACK MCP at the end
1894 * mark pending ACK to MCP bit.
1895 * prevent case that both bits are cleared.
1896 * At the end of load/unload driver checks that
1897 * sp_state is cleared, and this order prevents
1900 smp_mb__before_atomic();
1901 set_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK, &bp->sp_state);
1903 clear_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state);
1904 smp_mb__after_atomic();
1906 /* schedule the sp task as mcp ack is required */
1907 bnx2x_schedule_sp_task(bp);
1913 irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
1915 struct bnx2x *bp = netdev_priv(dev_instance);
1916 u16 status = bnx2x_ack_int(bp);
1921 /* Return here if interrupt is shared and it's not for us */
1922 if (unlikely(status == 0)) {
1923 DP(NETIF_MSG_INTR, "not our interrupt!\n");
1926 DP(NETIF_MSG_INTR, "got an interrupt status 0x%x\n", status);
1928 #ifdef BNX2X_STOP_ON_ERROR
1929 if (unlikely(bp->panic))
1933 for_each_eth_queue(bp, i) {
1934 struct bnx2x_fastpath *fp = &bp->fp[i];
1936 mask = 0x2 << (fp->index + CNIC_SUPPORT(bp));
1937 if (status & mask) {
1938 /* Handle Rx or Tx according to SB id */
1939 for_each_cos_in_tx_queue(fp, cos)
1940 prefetch(fp->txdata_ptr[cos]->tx_cons_sb);
1941 prefetch(&fp->sb_running_index[SM_RX_ID]);
1942 napi_schedule_irqoff(&bnx2x_fp(bp, fp->index, napi));
1947 if (CNIC_SUPPORT(bp)) {
1949 if (status & (mask | 0x1)) {
1950 struct cnic_ops *c_ops = NULL;
1953 c_ops = rcu_dereference(bp->cnic_ops);
1954 if (c_ops && (bp->cnic_eth_dev.drv_state &
1955 CNIC_DRV_STATE_HANDLES_IRQ))
1956 c_ops->cnic_handler(bp->cnic_data, NULL);
1963 if (unlikely(status & 0x1)) {
1965 /* schedule sp task to perform default status block work, ack
1966 * attentions and enable interrupts.
1968 bnx2x_schedule_sp_task(bp);
1975 if (unlikely(status))
1976 DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n",
1985 * General service functions
1988 int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource)
1991 u32 resource_bit = (1 << resource);
1992 int func = BP_FUNC(bp);
1993 u32 hw_lock_control_reg;
1996 /* Validating that the resource is within range */
1997 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
1998 BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
1999 resource, HW_LOCK_MAX_RESOURCE_VALUE);
2004 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
2006 hw_lock_control_reg =
2007 (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
2010 /* Validating that the resource is not already taken */
2011 lock_status = REG_RD(bp, hw_lock_control_reg);
2012 if (lock_status & resource_bit) {
2013 BNX2X_ERR("lock_status 0x%x resource_bit 0x%x\n",
2014 lock_status, resource_bit);
2018 /* Try for 5 second every 5ms */
2019 for (cnt = 0; cnt < 1000; cnt++) {
2020 /* Try to acquire the lock */
2021 REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
2022 lock_status = REG_RD(bp, hw_lock_control_reg);
2023 if (lock_status & resource_bit)
2026 usleep_range(5000, 10000);
2028 BNX2X_ERR("Timeout\n");
2032 int bnx2x_release_leader_lock(struct bnx2x *bp)
2034 return bnx2x_release_hw_lock(bp, bnx2x_get_leader_lock_resource(bp));
2037 int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource)
2040 u32 resource_bit = (1 << resource);
2041 int func = BP_FUNC(bp);
2042 u32 hw_lock_control_reg;
2044 /* Validating that the resource is within range */
2045 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
2046 BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
2047 resource, HW_LOCK_MAX_RESOURCE_VALUE);
2052 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
2054 hw_lock_control_reg =
2055 (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
2058 /* Validating that the resource is currently taken */
2059 lock_status = REG_RD(bp, hw_lock_control_reg);
2060 if (!(lock_status & resource_bit)) {
2061 BNX2X_ERR("lock_status 0x%x resource_bit 0x%x. Unlock was called but lock wasn't taken!\n",
2062 lock_status, resource_bit);
2066 REG_WR(bp, hw_lock_control_reg, resource_bit);
2070 int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port)
2072 /* The GPIO should be swapped if swap register is set and active */
2073 int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
2074 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
2075 int gpio_shift = gpio_num +
2076 (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
2077 u32 gpio_mask = (1 << gpio_shift);
2081 if (gpio_num > MISC_REGISTERS_GPIO_3) {
2082 BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
2086 /* read GPIO value */
2087 gpio_reg = REG_RD(bp, MISC_REG_GPIO);
2089 /* get the requested pin value */
2090 if ((gpio_reg & gpio_mask) == gpio_mask)
2098 int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
2100 /* The GPIO should be swapped if swap register is set and active */
2101 int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
2102 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
2103 int gpio_shift = gpio_num +
2104 (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
2105 u32 gpio_mask = (1 << gpio_shift);
2108 if (gpio_num > MISC_REGISTERS_GPIO_3) {
2109 BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
2113 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2114 /* read GPIO and mask except the float bits */
2115 gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
2118 case MISC_REGISTERS_GPIO_OUTPUT_LOW:
2120 "Set GPIO %d (shift %d) -> output low\n",
2121 gpio_num, gpio_shift);
2122 /* clear FLOAT and set CLR */
2123 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
2124 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
2127 case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
2129 "Set GPIO %d (shift %d) -> output high\n",
2130 gpio_num, gpio_shift);
2131 /* clear FLOAT and set SET */
2132 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
2133 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
2136 case MISC_REGISTERS_GPIO_INPUT_HI_Z:
2138 "Set GPIO %d (shift %d) -> input\n",
2139 gpio_num, gpio_shift);
2141 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
2148 REG_WR(bp, MISC_REG_GPIO, gpio_reg);
2149 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2154 int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode)
2159 /* Any port swapping should be handled by caller. */
2161 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2162 /* read GPIO and mask except the float bits */
2163 gpio_reg = REG_RD(bp, MISC_REG_GPIO);
2164 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS);
2165 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS);
2166 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS);
2169 case MISC_REGISTERS_GPIO_OUTPUT_LOW:
2170 DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output low\n", pins);
2172 gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS);
2175 case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
2176 DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output high\n", pins);
2178 gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS);
2181 case MISC_REGISTERS_GPIO_INPUT_HI_Z:
2182 DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> input\n", pins);
2184 gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS);
2188 BNX2X_ERR("Invalid GPIO mode assignment %d\n", mode);
2194 REG_WR(bp, MISC_REG_GPIO, gpio_reg);
2196 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2201 int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
2203 /* The GPIO should be swapped if swap register is set and active */
2204 int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
2205 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
2206 int gpio_shift = gpio_num +
2207 (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
2208 u32 gpio_mask = (1 << gpio_shift);
2211 if (gpio_num > MISC_REGISTERS_GPIO_3) {
2212 BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
2216 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2218 gpio_reg = REG_RD(bp, MISC_REG_GPIO_INT);
2221 case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
2223 "Clear GPIO INT %d (shift %d) -> output low\n",
2224 gpio_num, gpio_shift);
2225 /* clear SET and set CLR */
2226 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
2227 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
2230 case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
2232 "Set GPIO INT %d (shift %d) -> output high\n",
2233 gpio_num, gpio_shift);
2234 /* clear CLR and set SET */
2235 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
2236 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
2243 REG_WR(bp, MISC_REG_GPIO_INT, gpio_reg);
2244 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2249 static int bnx2x_set_spio(struct bnx2x *bp, int spio, u32 mode)
2253 /* Only 2 SPIOs are configurable */
2254 if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) {
2255 BNX2X_ERR("Invalid SPIO 0x%x\n", spio);
2259 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
2260 /* read SPIO and mask except the float bits */
2261 spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_SPIO_FLOAT);
2264 case MISC_SPIO_OUTPUT_LOW:
2265 DP(NETIF_MSG_HW, "Set SPIO 0x%x -> output low\n", spio);
2266 /* clear FLOAT and set CLR */
2267 spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
2268 spio_reg |= (spio << MISC_SPIO_CLR_POS);
2271 case MISC_SPIO_OUTPUT_HIGH:
2272 DP(NETIF_MSG_HW, "Set SPIO 0x%x -> output high\n", spio);
2273 /* clear FLOAT and set SET */
2274 spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
2275 spio_reg |= (spio << MISC_SPIO_SET_POS);
2278 case MISC_SPIO_INPUT_HI_Z:
2279 DP(NETIF_MSG_HW, "Set SPIO 0x%x -> input\n", spio);
2281 spio_reg |= (spio << MISC_SPIO_FLOAT_POS);
2288 REG_WR(bp, MISC_REG_SPIO, spio_reg);
2289 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
2294 void bnx2x_calc_fc_adv(struct bnx2x *bp)
2296 u8 cfg_idx = bnx2x_get_link_cfg_idx(bp);
2298 bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
2300 switch (bp->link_vars.ieee_fc &
2301 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
2302 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
2303 bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
2307 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
2308 bp->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause;
2316 static void bnx2x_set_requested_fc(struct bnx2x *bp)
2318 /* Initialize link parameters structure variables
2319 * It is recommended to turn off RX FC for jumbo frames
2320 * for better performance
2322 if (CHIP_IS_E1x(bp) && (bp->dev->mtu > 5000))
2323 bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX;
2325 bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
2328 static void bnx2x_init_dropless_fc(struct bnx2x *bp)
2330 u32 pause_enabled = 0;
2332 if (!CHIP_IS_E1(bp) && bp->dropless_fc && bp->link_vars.link_up) {
2333 if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
2336 REG_WR(bp, BAR_USTRORM_INTMEM +
2337 USTORM_ETH_PAUSE_ENABLED_OFFSET(BP_PORT(bp)),
2341 DP(NETIF_MSG_IFUP | NETIF_MSG_LINK, "dropless_fc is %s\n",
2342 pause_enabled ? "enabled" : "disabled");
2345 int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
2347 int rc, cfx_idx = bnx2x_get_link_cfg_idx(bp);
2348 u16 req_line_speed = bp->link_params.req_line_speed[cfx_idx];
2350 if (!BP_NOMCP(bp)) {
2351 bnx2x_set_requested_fc(bp);
2352 bnx2x_acquire_phy_lock(bp);
2354 if (load_mode == LOAD_DIAG) {
2355 struct link_params *lp = &bp->link_params;
2356 lp->loopback_mode = LOOPBACK_XGXS;
2357 /* Prefer doing PHY loopback at highest speed */
2358 if (lp->req_line_speed[cfx_idx] < SPEED_20000) {
2359 if (lp->speed_cap_mask[cfx_idx] &
2360 PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)
2361 lp->req_line_speed[cfx_idx] =
2363 else if (lp->speed_cap_mask[cfx_idx] &
2364 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
2365 lp->req_line_speed[cfx_idx] =
2368 lp->req_line_speed[cfx_idx] =
2373 if (load_mode == LOAD_LOOPBACK_EXT) {
2374 struct link_params *lp = &bp->link_params;
2375 lp->loopback_mode = LOOPBACK_EXT;
2378 rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
2380 bnx2x_release_phy_lock(bp);
2382 bnx2x_init_dropless_fc(bp);
2384 bnx2x_calc_fc_adv(bp);
2386 if (bp->link_vars.link_up) {
2387 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
2388 bnx2x_link_report(bp);
2390 queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
2391 bp->link_params.req_line_speed[cfx_idx] = req_line_speed;
2394 BNX2X_ERR("Bootcode is missing - can not initialize link\n");
2398 void bnx2x_link_set(struct bnx2x *bp)
2400 if (!BP_NOMCP(bp)) {
2401 bnx2x_acquire_phy_lock(bp);
2402 bnx2x_phy_init(&bp->link_params, &bp->link_vars);
2403 bnx2x_release_phy_lock(bp);
2405 bnx2x_init_dropless_fc(bp);
2407 bnx2x_calc_fc_adv(bp);
2409 BNX2X_ERR("Bootcode is missing - can not set link\n");
2412 static void bnx2x__link_reset(struct bnx2x *bp)
2414 if (!BP_NOMCP(bp)) {
2415 bnx2x_acquire_phy_lock(bp);
2416 bnx2x_lfa_reset(&bp->link_params, &bp->link_vars);
2417 bnx2x_release_phy_lock(bp);
2419 BNX2X_ERR("Bootcode is missing - can not reset link\n");
2422 void bnx2x_force_link_reset(struct bnx2x *bp)
2424 bnx2x_acquire_phy_lock(bp);
2425 bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1);
2426 bnx2x_release_phy_lock(bp);
2429 u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes)
2433 if (!BP_NOMCP(bp)) {
2434 bnx2x_acquire_phy_lock(bp);
2435 rc = bnx2x_test_link(&bp->link_params, &bp->link_vars,
2437 bnx2x_release_phy_lock(bp);
2439 BNX2X_ERR("Bootcode is missing - can not test link\n");
2444 /* Calculates the sum of vn_min_rates.
2445 It's needed for further normalizing of the min_rates.
2447 sum of vn_min_rates.
2449 0 - if all the min_rates are 0.
2450 In the later case fairness algorithm should be deactivated.
2451 If not all min_rates are zero then those that are zeroes will be set to 1.
2453 static void bnx2x_calc_vn_min(struct bnx2x *bp,
2454 struct cmng_init_input *input)
2459 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
2460 u32 vn_cfg = bp->mf_config[vn];
2461 u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
2462 FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
2464 /* Skip hidden vns */
2465 if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE)
2467 /* If min rate is zero - set it to 1 */
2468 else if (!vn_min_rate)
2469 vn_min_rate = DEF_MIN_RATE;
2473 input->vnic_min_rate[vn] = vn_min_rate;
2476 /* if ETS or all min rates are zeros - disable fairness */
2477 if (BNX2X_IS_ETS_ENABLED(bp)) {
2478 input->flags.cmng_enables &=
2479 ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
2480 DP(NETIF_MSG_IFUP, "Fairness will be disabled due to ETS\n");
2481 } else if (all_zero) {
2482 input->flags.cmng_enables &=
2483 ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
2485 "All MIN values are zeroes fairness will be disabled\n");
2487 input->flags.cmng_enables |=
2488 CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
2491 static void bnx2x_calc_vn_max(struct bnx2x *bp, int vn,
2492 struct cmng_init_input *input)
2495 u32 vn_cfg = bp->mf_config[vn];
2497 if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE)
2500 u32 maxCfg = bnx2x_extract_max_cfg(bp, vn_cfg);
2502 if (IS_MF_PERCENT_BW(bp)) {
2503 /* maxCfg in percents of linkspeed */
2504 vn_max_rate = (bp->link_vars.line_speed * maxCfg) / 100;
2505 } else /* SD modes */
2506 /* maxCfg is absolute in 100Mb units */
2507 vn_max_rate = maxCfg * 100;
2510 DP(NETIF_MSG_IFUP, "vn %d: vn_max_rate %d\n", vn, vn_max_rate);
2512 input->vnic_max_rate[vn] = vn_max_rate;
2515 static int bnx2x_get_cmng_fns_mode(struct bnx2x *bp)
2517 if (CHIP_REV_IS_SLOW(bp))
2518 return CMNG_FNS_NONE;
2520 return CMNG_FNS_MINMAX;
2522 return CMNG_FNS_NONE;
2525 void bnx2x_read_mf_cfg(struct bnx2x *bp)
2527 int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1);
2530 return; /* what should be the default value in this case */
2532 /* For 2 port configuration the absolute function number formula
2534 * abs_func = 2 * vn + BP_PORT + BP_PATH
2536 * and there are 4 functions per port
2538 * For 4 port configuration it is
2539 * abs_func = 4 * vn + 2 * BP_PORT + BP_PATH
2541 * and there are 2 functions per port
2543 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
2544 int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp);
2546 if (func >= E1H_FUNC_MAX)
2550 MF_CFG_RD(bp, func_mf_config[func].config);
2552 if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) {
2553 DP(NETIF_MSG_IFUP, "mf_cfg function disabled\n");
2554 bp->flags |= MF_FUNC_DIS;
2556 DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n");
2557 bp->flags &= ~MF_FUNC_DIS;
2561 static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type)
2563 struct cmng_init_input input;
2564 memset(&input, 0, sizeof(struct cmng_init_input));
2566 input.port_rate = bp->link_vars.line_speed;
2568 if (cmng_type == CMNG_FNS_MINMAX && input.port_rate) {
2571 /* read mf conf from shmem */
2573 bnx2x_read_mf_cfg(bp);
2575 /* vn_weight_sum and enable fairness if not 0 */
2576 bnx2x_calc_vn_min(bp, &input);
2578 /* calculate and set min-max rate for each vn */
2580 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++)
2581 bnx2x_calc_vn_max(bp, vn, &input);
2583 /* always enable rate shaping and fairness */
2584 input.flags.cmng_enables |=
2585 CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
2587 bnx2x_init_cmng(&input, &bp->cmng);
2591 /* rate shaping and fairness are disabled */
2593 "rate shaping and fairness are disabled\n");
2596 static void storm_memset_cmng(struct bnx2x *bp,
2597 struct cmng_init *cmng,
2601 size_t size = sizeof(struct cmng_struct_per_port);
2603 u32 addr = BAR_XSTRORM_INTMEM +
2604 XSTORM_CMNG_PER_PORT_VARS_OFFSET(port);
2606 __storm_memset_struct(bp, addr, size, (u32 *)&cmng->port);
2608 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
2609 int func = func_by_vn(bp, vn);
2611 addr = BAR_XSTRORM_INTMEM +
2612 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func);
2613 size = sizeof(struct rate_shaping_vars_per_vn);
2614 __storm_memset_struct(bp, addr, size,
2615 (u32 *)&cmng->vnic.vnic_max_rate[vn]);
2617 addr = BAR_XSTRORM_INTMEM +
2618 XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func);
2619 size = sizeof(struct fairness_vars_per_vn);
2620 __storm_memset_struct(bp, addr, size,
2621 (u32 *)&cmng->vnic.vnic_min_rate[vn]);
2625 /* init cmng mode in HW according to local configuration */
2626 void bnx2x_set_local_cmng(struct bnx2x *bp)
2628 int cmng_fns = bnx2x_get_cmng_fns_mode(bp);
2630 if (cmng_fns != CMNG_FNS_NONE) {
2631 bnx2x_cmng_fns_init(bp, false, cmng_fns);
2632 storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
2634 /* rate shaping and fairness are disabled */
2636 "single function mode without fairness\n");
2640 /* This function is called upon link interrupt */
2641 static void bnx2x_link_attn(struct bnx2x *bp)
2643 /* Make sure that we are synced with the current statistics */
2644 bnx2x_stats_handle(bp, STATS_EVENT_STOP);
2646 bnx2x_link_update(&bp->link_params, &bp->link_vars);
2648 bnx2x_init_dropless_fc(bp);
2650 if (bp->link_vars.link_up) {
2652 if (bp->link_vars.mac_type != MAC_TYPE_EMAC) {
2653 struct host_port_stats *pstats;
2655 pstats = bnx2x_sp(bp, port_stats);
2656 /* reset old mac stats */
2657 memset(&(pstats->mac_stx[0]), 0,
2658 sizeof(struct mac_stx));
2660 if (bp->state == BNX2X_STATE_OPEN)
2661 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
2664 if (bp->link_vars.link_up && bp->link_vars.line_speed)
2665 bnx2x_set_local_cmng(bp);
2667 __bnx2x_link_report(bp);
2670 bnx2x_link_sync_notify(bp);
2673 void bnx2x__link_status_update(struct bnx2x *bp)
2675 if (bp->state != BNX2X_STATE_OPEN)
2678 /* read updated dcb configuration */
2680 bnx2x_dcbx_pmf_update(bp);
2681 bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
2682 if (bp->link_vars.link_up)
2683 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
2685 bnx2x_stats_handle(bp, STATS_EVENT_STOP);
2686 /* indicate link status */
2687 bnx2x_link_report(bp);
2690 bp->port.supported[0] |= (SUPPORTED_10baseT_Half |
2691 SUPPORTED_10baseT_Full |
2692 SUPPORTED_100baseT_Half |
2693 SUPPORTED_100baseT_Full |
2694 SUPPORTED_1000baseT_Full |
2695 SUPPORTED_2500baseX_Full |
2696 SUPPORTED_10000baseT_Full |
2701 SUPPORTED_Asym_Pause);
2702 bp->port.advertising[0] = bp->port.supported[0];
2704 bp->link_params.bp = bp;
2705 bp->link_params.port = BP_PORT(bp);
2706 bp->link_params.req_duplex[0] = DUPLEX_FULL;
2707 bp->link_params.req_flow_ctrl[0] = BNX2X_FLOW_CTRL_NONE;
2708 bp->link_params.req_line_speed[0] = SPEED_10000;
2709 bp->link_params.speed_cap_mask[0] = 0x7f0000;
2710 bp->link_params.switch_cfg = SWITCH_CFG_10G;
2711 bp->link_vars.mac_type = MAC_TYPE_BMAC;
2712 bp->link_vars.line_speed = SPEED_10000;
2713 bp->link_vars.link_status =
2714 (LINK_STATUS_LINK_UP |
2715 LINK_STATUS_SPEED_AND_DUPLEX_10GTFD);
2716 bp->link_vars.link_up = 1;
2717 bp->link_vars.duplex = DUPLEX_FULL;
2718 bp->link_vars.flow_ctrl = BNX2X_FLOW_CTRL_NONE;
2719 __bnx2x_link_report(bp);
2721 bnx2x_sample_bulletin(bp);
2723 /* if bulletin board did not have an update for link status
2724 * __bnx2x_link_report will report current status
2725 * but it will NOT duplicate report in case of already reported
2726 * during sampling bulletin board.
2728 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
2732 static int bnx2x_afex_func_update(struct bnx2x *bp, u16 vifid,
2733 u16 vlan_val, u8 allowed_prio)
2735 struct bnx2x_func_state_params func_params = {NULL};
2736 struct bnx2x_func_afex_update_params *f_update_params =
2737 &func_params.params.afex_update;
2739 func_params.f_obj = &bp->func_obj;
2740 func_params.cmd = BNX2X_F_CMD_AFEX_UPDATE;
2742 /* no need to wait for RAMROD completion, so don't
2743 * set RAMROD_COMP_WAIT flag
2746 f_update_params->vif_id = vifid;
2747 f_update_params->afex_default_vlan = vlan_val;
2748 f_update_params->allowed_priorities = allowed_prio;
2750 /* if ramrod can not be sent, response to MCP immediately */
2751 if (bnx2x_func_state_change(bp, &func_params) < 0)
2752 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0);
2757 static int bnx2x_afex_handle_vif_list_cmd(struct bnx2x *bp, u8 cmd_type,
2758 u16 vif_index, u8 func_bit_map)
2760 struct bnx2x_func_state_params func_params = {NULL};
2761 struct bnx2x_func_afex_viflists_params *update_params =
2762 &func_params.params.afex_viflists;
2766 /* validate only LIST_SET and LIST_GET are received from switch */
2767 if ((cmd_type != VIF_LIST_RULE_GET) && (cmd_type != VIF_LIST_RULE_SET))
2768 BNX2X_ERR("BUG! afex_handle_vif_list_cmd invalid type 0x%x\n",
2771 func_params.f_obj = &bp->func_obj;
2772 func_params.cmd = BNX2X_F_CMD_AFEX_VIFLISTS;
2774 /* set parameters according to cmd_type */
2775 update_params->afex_vif_list_command = cmd_type;
2776 update_params->vif_list_index = vif_index;
2777 update_params->func_bit_map =
2778 (cmd_type == VIF_LIST_RULE_GET) ? 0 : func_bit_map;
2779 update_params->func_to_clear = 0;
2781 (cmd_type == VIF_LIST_RULE_GET) ?
2782 DRV_MSG_CODE_AFEX_LISTGET_ACK :
2783 DRV_MSG_CODE_AFEX_LISTSET_ACK;
2785 /* if ramrod can not be sent, respond to MCP immediately for
2786 * SET and GET requests (other are not triggered from MCP)
2788 rc = bnx2x_func_state_change(bp, &func_params);
2790 bnx2x_fw_command(bp, drv_msg_code, 0);
2795 static void bnx2x_handle_afex_cmd(struct bnx2x *bp, u32 cmd)
2797 struct afex_stats afex_stats;
2798 u32 func = BP_ABS_FUNC(bp);
2805 u32 addr_to_write, vifid, addrs, stats_type, i;
2807 if (cmd & DRV_STATUS_AFEX_LISTGET_REQ) {
2808 vifid = SHMEM2_RD(bp, afex_param1_to_driver[BP_FW_MB_IDX(bp)]);
2810 "afex: got MCP req LISTGET_REQ for vifid 0x%x\n", vifid);
2811 bnx2x_afex_handle_vif_list_cmd(bp, VIF_LIST_RULE_GET, vifid, 0);
2814 if (cmd & DRV_STATUS_AFEX_LISTSET_REQ) {
2815 vifid = SHMEM2_RD(bp, afex_param1_to_driver[BP_FW_MB_IDX(bp)]);
2816 addrs = SHMEM2_RD(bp, afex_param2_to_driver[BP_FW_MB_IDX(bp)]);
2818 "afex: got MCP req LISTSET_REQ for vifid 0x%x addrs 0x%x\n",
2820 bnx2x_afex_handle_vif_list_cmd(bp, VIF_LIST_RULE_SET, vifid,
2824 if (cmd & DRV_STATUS_AFEX_STATSGET_REQ) {
2825 addr_to_write = SHMEM2_RD(bp,
2826 afex_scratchpad_addr_to_write[BP_FW_MB_IDX(bp)]);
2827 stats_type = SHMEM2_RD(bp,
2828 afex_param1_to_driver[BP_FW_MB_IDX(bp)]);
2831 "afex: got MCP req STATSGET_REQ, write to addr 0x%x\n",
2834 bnx2x_afex_collect_stats(bp, (void *)&afex_stats, stats_type);
2836 /* write response to scratchpad, for MCP */
2837 for (i = 0; i < (sizeof(struct afex_stats)/sizeof(u32)); i++)
2838 REG_WR(bp, addr_to_write + i*sizeof(u32),
2839 *(((u32 *)(&afex_stats))+i));
2841 /* send ack message to MCP */
2842 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_STATSGET_ACK, 0);
2845 if (cmd & DRV_STATUS_AFEX_VIFSET_REQ) {
2846 mf_config = MF_CFG_RD(bp, func_mf_config[func].config);
2847 bp->mf_config[BP_VN(bp)] = mf_config;
2849 "afex: got MCP req VIFSET_REQ, mf_config 0x%x\n",
2852 /* if VIF_SET is "enabled" */
2853 if (!(mf_config & FUNC_MF_CFG_FUNC_DISABLED)) {
2854 /* set rate limit directly to internal RAM */
2855 struct cmng_init_input cmng_input;
2856 struct rate_shaping_vars_per_vn m_rs_vn;
2857 size_t size = sizeof(struct rate_shaping_vars_per_vn);
2858 u32 addr = BAR_XSTRORM_INTMEM +
2859 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(BP_FUNC(bp));
2861 bp->mf_config[BP_VN(bp)] = mf_config;
2863 bnx2x_calc_vn_max(bp, BP_VN(bp), &cmng_input);
2864 m_rs_vn.vn_counter.rate =
2865 cmng_input.vnic_max_rate[BP_VN(bp)];
2866 m_rs_vn.vn_counter.quota =
2867 (m_rs_vn.vn_counter.rate *
2868 RS_PERIODIC_TIMEOUT_USEC) / 8;
2870 __storm_memset_struct(bp, addr, size, (u32 *)&m_rs_vn);
2872 /* read relevant values from mf_cfg struct in shmem */
2874 (MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) &
2875 FUNC_MF_CFG_E1HOV_TAG_MASK) >>
2876 FUNC_MF_CFG_E1HOV_TAG_SHIFT;
2878 (MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) &
2879 FUNC_MF_CFG_AFEX_VLAN_MASK) >>
2880 FUNC_MF_CFG_AFEX_VLAN_SHIFT;
2881 vlan_prio = (mf_config &
2882 FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >>
2883 FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT;
2884 vlan_val |= (vlan_prio << VLAN_PRIO_SHIFT);
2887 func_mf_config[func].afex_config) &
2888 FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >>
2889 FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT;
2892 func_mf_config[func].afex_config) &
2893 FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >>
2894 FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT;
2896 /* send ramrod to FW, return in case of failure */
2897 if (bnx2x_afex_func_update(bp, vif_id, vlan_val,
2901 bp->afex_def_vlan_tag = vlan_val;
2902 bp->afex_vlan_mode = vlan_mode;
2904 /* notify link down because BP->flags is disabled */
2905 bnx2x_link_report(bp);
2907 /* send INVALID VIF ramrod to FW */
2908 bnx2x_afex_func_update(bp, 0xFFFF, 0, 0);
2910 /* Reset the default afex VLAN */
2911 bp->afex_def_vlan_tag = -1;
2916 static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp)
2918 struct bnx2x_func_switch_update_params *switch_update_params;
2919 struct bnx2x_func_state_params func_params;
2921 memset(&func_params, 0, sizeof(struct bnx2x_func_state_params));
2922 switch_update_params = &func_params.params.switch_update;
2923 func_params.f_obj = &bp->func_obj;
2924 func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE;
2926 if (IS_MF_UFP(bp) || IS_MF_BD(bp)) {
2927 int func = BP_ABS_FUNC(bp);
2930 /* Re-learn the S-tag from shmem */
2931 val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) &
2932 FUNC_MF_CFG_E1HOV_TAG_MASK;
2933 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
2936 BNX2X_ERR("Got an SVID event, but no tag is configured in shmem\n");
2940 /* Configure new S-tag in LLH */
2941 REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + BP_PORT(bp) * 8,
2944 /* Send Ramrod to update FW of change */
2945 __set_bit(BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG,
2946 &switch_update_params->changes);
2947 switch_update_params->vlan = bp->mf_ov;
2949 if (bnx2x_func_state_change(bp, &func_params) < 0) {
2950 BNX2X_ERR("Failed to configure FW of S-tag Change to %02x\n",
2954 DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n",
2961 bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0);
2964 bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE, 0);
2967 static void bnx2x_pmf_update(struct bnx2x *bp)
2969 int port = BP_PORT(bp);
2973 DP(BNX2X_MSG_MCP, "pmf %d\n", bp->port.pmf);
2976 * We need the mb() to ensure the ordering between the writing to
2977 * bp->port.pmf here and reading it from the bnx2x_periodic_task().
2981 /* queue a periodic task */
2982 queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
2984 bnx2x_dcbx_pmf_update(bp);
2986 /* enable nig attention */
2987 val = (0xff0f | (1 << (BP_VN(bp) + 4)));
2988 if (bp->common.int_block == INT_BLOCK_HC) {
2989 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
2990 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
2991 } else if (!CHIP_IS_E1x(bp)) {
2992 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val);
2993 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val);
2996 bnx2x_stats_handle(bp, STATS_EVENT_PMF);
3004 * General service functions
3007 /* send the MCP a request, block until there is a reply */
3008 u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param)
3010 int mb_idx = BP_FW_MB_IDX(bp);
3014 u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
3016 mutex_lock(&bp->fw_mb_mutex);
3018 SHMEM_WR(bp, func_mb[mb_idx].drv_mb_param, param);
3019 SHMEM_WR(bp, func_mb[mb_idx].drv_mb_header, (command | seq));
3021 DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB param 0x%08x\n",
3022 (command | seq), param);
3025 /* let the FW do it's magic ... */
3028 rc = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_header);
3030 /* Give the FW up to 5 second (500*10ms) */
3031 } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
3033 DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
3034 cnt*delay, rc, seq);
3036 /* is this a reply to our command? */
3037 if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK))
3038 rc &= FW_MSG_CODE_MASK;
3041 BNX2X_ERR("FW failed to respond!\n");
3045 mutex_unlock(&bp->fw_mb_mutex);
3050 static void storm_memset_func_cfg(struct bnx2x *bp,
3051 struct tstorm_eth_function_common_config *tcfg,
3054 size_t size = sizeof(struct tstorm_eth_function_common_config);
3056 u32 addr = BAR_TSTRORM_INTMEM +
3057 TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid);
3059 __storm_memset_struct(bp, addr, size, (u32 *)tcfg);
3062 void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p)
3064 if (CHIP_IS_E1x(bp)) {
3065 struct tstorm_eth_function_common_config tcfg = {0};
3067 storm_memset_func_cfg(bp, &tcfg, p->func_id);
3070 /* Enable the function in the FW */
3071 storm_memset_vf_to_pf(bp, p->func_id, p->pf_id);
3072 storm_memset_func_en(bp, p->func_id, 1);
3075 if (p->spq_active) {
3076 storm_memset_spq_addr(bp, p->spq_map, p->func_id);
3077 REG_WR(bp, XSEM_REG_FAST_MEMORY +
3078 XSTORM_SPQ_PROD_OFFSET(p->func_id), p->spq_prod);
3083 * bnx2x_get_common_flags - Return common flags
3087 * @zero_stats TRUE if statistics zeroing is needed
3089 * Return the flags that are common for the Tx-only and not normal connections.
3091 static unsigned long bnx2x_get_common_flags(struct bnx2x *bp,
3092 struct bnx2x_fastpath *fp,
3095 unsigned long flags = 0;
3097 /* PF driver will always initialize the Queue to an ACTIVE state */
3098 __set_bit(BNX2X_Q_FLG_ACTIVE, &flags);
3100 /* tx only connections collect statistics (on the same index as the
3101 * parent connection). The statistics are zeroed when the parent
3102 * connection is initialized.
3105 __set_bit(BNX2X_Q_FLG_STATS, &flags);
3107 __set_bit(BNX2X_Q_FLG_ZERO_STATS, &flags);
3109 if (bp->flags & TX_SWITCHING)
3110 __set_bit(BNX2X_Q_FLG_TX_SWITCH, &flags);
3112 __set_bit(BNX2X_Q_FLG_PCSUM_ON_PKT, &flags);
3113 __set_bit(BNX2X_Q_FLG_TUN_INC_INNER_IP_ID, &flags);
3115 #ifdef BNX2X_STOP_ON_ERROR
3116 __set_bit(BNX2X_Q_FLG_TX_SEC, &flags);
3122 static unsigned long bnx2x_get_q_flags(struct bnx2x *bp,
3123 struct bnx2x_fastpath *fp,
3126 unsigned long flags = 0;
3128 /* calculate other queue flags */
3130 __set_bit(BNX2X_Q_FLG_OV, &flags);
3132 if (IS_FCOE_FP(fp)) {
3133 __set_bit(BNX2X_Q_FLG_FCOE, &flags);
3134 /* For FCoE - force usage of default priority (for afex) */
3135 __set_bit(BNX2X_Q_FLG_FORCE_DEFAULT_PRI, &flags);
3138 if (fp->mode != TPA_MODE_DISABLED) {
3139 __set_bit(BNX2X_Q_FLG_TPA, &flags);
3140 __set_bit(BNX2X_Q_FLG_TPA_IPV6, &flags);
3141 if (fp->mode == TPA_MODE_GRO)
3142 __set_bit(BNX2X_Q_FLG_TPA_GRO, &flags);
3146 __set_bit(BNX2X_Q_FLG_LEADING_RSS, &flags);
3147 __set_bit(BNX2X_Q_FLG_MCAST, &flags);
3150 /* Always set HW VLAN stripping */
3151 __set_bit(BNX2X_Q_FLG_VLAN, &flags);
3153 /* configure silent vlan removal */
3155 __set_bit(BNX2X_Q_FLG_SILENT_VLAN_REM, &flags);
3157 return flags | bnx2x_get_common_flags(bp, fp, true);
3160 static void bnx2x_pf_q_prep_general(struct bnx2x *bp,
3161 struct bnx2x_fastpath *fp, struct bnx2x_general_setup_params *gen_init,
3164 gen_init->stat_id = bnx2x_stats_id(fp);
3165 gen_init->spcl_id = fp->cl_id;
3167 /* Always use mini-jumbo MTU for FCoE L2 ring */
3169 gen_init->mtu = BNX2X_FCOE_MINI_JUMBO_MTU;
3171 gen_init->mtu = bp->dev->mtu;
3173 gen_init->cos = cos;
3175 gen_init->fp_hsi = ETH_FP_HSI_VERSION;
3178 static void bnx2x_pf_rx_q_prep(struct bnx2x *bp,
3179 struct bnx2x_fastpath *fp, struct rxq_pause_params *pause,
3180 struct bnx2x_rxq_setup_params *rxq_init)
3184 u16 tpa_agg_size = 0;
3186 if (fp->mode != TPA_MODE_DISABLED) {
3187 pause->sge_th_lo = SGE_TH_LO(bp);
3188 pause->sge_th_hi = SGE_TH_HI(bp);
3190 /* validate SGE ring has enough to cross high threshold */
3191 WARN_ON(bp->dropless_fc &&
3192 pause->sge_th_hi + FW_PREFETCH_CNT >
3193 MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES);
3195 tpa_agg_size = TPA_AGG_SIZE;
3196 max_sge = SGE_PAGE_ALIGN(bp->dev->mtu) >>
3198 max_sge = ((max_sge + PAGES_PER_SGE - 1) &
3199 (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT;
3200 sge_sz = (u16)min_t(u32, SGE_PAGES, 0xffff);
3203 /* pause - not for e1 */
3204 if (!CHIP_IS_E1(bp)) {
3205 pause->bd_th_lo = BD_TH_LO(bp);
3206 pause->bd_th_hi = BD_TH_HI(bp);
3208 pause->rcq_th_lo = RCQ_TH_LO(bp);
3209 pause->rcq_th_hi = RCQ_TH_HI(bp);
3211 * validate that rings have enough entries to cross
3214 WARN_ON(bp->dropless_fc &&
3215 pause->bd_th_hi + FW_PREFETCH_CNT >
3217 WARN_ON(bp->dropless_fc &&
3218 pause->rcq_th_hi + FW_PREFETCH_CNT >
3219 NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT);
3225 rxq_init->dscr_map = fp->rx_desc_mapping;
3226 rxq_init->sge_map = fp->rx_sge_mapping;
3227 rxq_init->rcq_map = fp->rx_comp_mapping;
3228 rxq_init->rcq_np_map = fp->rx_comp_mapping + BCM_PAGE_SIZE;
3230 /* This should be a maximum number of data bytes that may be
3231 * placed on the BD (not including paddings).
3233 rxq_init->buf_sz = fp->rx_buf_size - BNX2X_FW_RX_ALIGN_START -
3234 BNX2X_FW_RX_ALIGN_END - IP_HEADER_ALIGNMENT_PADDING;
3236 rxq_init->cl_qzone_id = fp->cl_qzone_id;
3237 rxq_init->tpa_agg_sz = tpa_agg_size;
3238 rxq_init->sge_buf_sz = sge_sz;
3239 rxq_init->max_sges_pkt = max_sge;
3240 rxq_init->rss_engine_id = BP_FUNC(bp);
3241 rxq_init->mcast_engine_id = BP_FUNC(bp);
3243 /* Maximum number or simultaneous TPA aggregation for this Queue.
3245 * For PF Clients it should be the maximum available number.
3246 * VF driver(s) may want to define it to a smaller value.
3248 rxq_init->max_tpa_queues = MAX_AGG_QS(bp);
3250 rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
3251 rxq_init->fw_sb_id = fp->fw_sb_id;
3254 rxq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS;
3256 rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
3257 /* configure silent vlan removal
3258 * if multi function mode is afex, then mask default vlan
3260 if (IS_MF_AFEX(bp)) {
3261 rxq_init->silent_removal_value = bp->afex_def_vlan_tag;
3262 rxq_init->silent_removal_mask = VLAN_VID_MASK;
3266 static void bnx2x_pf_tx_q_prep(struct bnx2x *bp,
3267 struct bnx2x_fastpath *fp, struct bnx2x_txq_setup_params *txq_init,
3270 txq_init->dscr_map = fp->txdata_ptr[cos]->tx_desc_mapping;
3271 txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos;
3272 txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW;
3273 txq_init->fw_sb_id = fp->fw_sb_id;
3276 * set the tss leading client id for TX classification ==
3277 * leading RSS client id
3279 txq_init->tss_leading_cl_id = bnx2x_fp(bp, 0, cl_id);
3281 if (IS_FCOE_FP(fp)) {
3282 txq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS;
3283 txq_init->traffic_type = LLFC_TRAFFIC_TYPE_FCOE;
3287 static void bnx2x_pf_init(struct bnx2x *bp)
3289 struct bnx2x_func_init_params func_init = {0};
3290 struct event_ring_data eq_data = { {0} };
3292 if (!CHIP_IS_E1x(bp)) {
3293 /* reset IGU PF statistics: MSIX + ATTN */
3295 REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
3296 BNX2X_IGU_STAS_MSG_VF_CNT*4 +
3297 (CHIP_MODE_IS_4_PORT(bp) ?
3298 BP_FUNC(bp) : BP_VN(bp))*4, 0);
3300 REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
3301 BNX2X_IGU_STAS_MSG_VF_CNT*4 +
3302 BNX2X_IGU_STAS_MSG_PF_CNT*4 +
3303 (CHIP_MODE_IS_4_PORT(bp) ?
3304 BP_FUNC(bp) : BP_VN(bp))*4, 0);
3307 func_init.spq_active = true;
3308 func_init.pf_id = BP_FUNC(bp);
3309 func_init.func_id = BP_FUNC(bp);
3310 func_init.spq_map = bp->spq_mapping;
3311 func_init.spq_prod = bp->spq_prod_idx;
3313 bnx2x_func_init(bp, &func_init);
3315 memset(&(bp->cmng), 0, sizeof(struct cmng_struct_per_port));
3318 * Congestion management values depend on the link rate
3319 * There is no active link so initial link rate is set to 10 Gbps.
3320 * When the link comes up The congestion management values are
3321 * re-calculated according to the actual link rate.
3323 bp->link_vars.line_speed = SPEED_10000;
3324 bnx2x_cmng_fns_init(bp, true, bnx2x_get_cmng_fns_mode(bp));
3326 /* Only the PMF sets the HW */
3328 storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
3330 /* init Event Queue - PCI bus guarantees correct endianity*/
3331 eq_data.base_addr.hi = U64_HI(bp->eq_mapping);
3332 eq_data.base_addr.lo = U64_LO(bp->eq_mapping);
3333 eq_data.producer = bp->eq_prod;
3334 eq_data.index_id = HC_SP_INDEX_EQ_CONS;
3335 eq_data.sb_id = DEF_SB_ID;
3336 storm_memset_eq_data(bp, &eq_data, BP_FUNC(bp));
3339 static void bnx2x_e1h_disable(struct bnx2x *bp)
3341 int port = BP_PORT(bp);
3343 bnx2x_tx_disable(bp);
3345 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
3348 static void bnx2x_e1h_enable(struct bnx2x *bp)
3350 int port = BP_PORT(bp);
3352 if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)))
3353 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
3355 /* Tx queue should be only re-enabled */
3356 netif_tx_wake_all_queues(bp->dev);
3359 * Should not call netif_carrier_on since it will be called if the link
3360 * is up when checking for link state
3364 #define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3
3366 static void bnx2x_drv_info_ether_stat(struct bnx2x *bp)
3368 struct eth_stats_info *ether_stat =
3369 &bp->slowpath->drv_info_to_mcp.ether_stat;
3370 struct bnx2x_vlan_mac_obj *mac_obj =
3371 &bp->sp_objs->mac_obj;
3374 strlcpy(ether_stat->version, DRV_MODULE_VERSION,
3375 ETH_STAT_INFO_VERSION_LEN);
3377 /* get DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED macs, placing them in the
3378 * mac_local field in ether_stat struct. The base address is offset by 2
3379 * bytes to account for the field being 8 bytes but a mac address is
3380 * only 6 bytes. Likewise, the stride for the get_n_elements function is
3381 * 2 bytes to compensate from the 6 bytes of a mac to the 8 bytes
3382 * allocated by the ether_stat struct, so the macs will land in their
3385 for (i = 0; i < DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED; i++)
3386 memset(ether_stat->mac_local + i, 0,
3387 sizeof(ether_stat->mac_local[0]));
3388 mac_obj->get_n_elements(bp, &bp->sp_objs[0].mac_obj,
3389 DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED,
3390 ether_stat->mac_local + MAC_PAD, MAC_PAD,
3392 ether_stat->mtu_size = bp->dev->mtu;
3393 if (bp->dev->features & NETIF_F_RXCSUM)
3394 ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK;
3395 if (bp->dev->features & NETIF_F_TSO)
3396 ether_stat->feature_flags |= FEATURE_ETH_LSO_MASK;
3397 ether_stat->feature_flags |= bp->common.boot_mode;
3399 ether_stat->promiscuous_mode = (bp->dev->flags & IFF_PROMISC) ? 1 : 0;
3401 ether_stat->txq_size = bp->tx_ring_size;
3402 ether_stat->rxq_size = bp->rx_ring_size;
3404 #ifdef CONFIG_BNX2X_SRIOV
3405 ether_stat->vf_cnt = IS_SRIOV(bp) ? bp->vfdb->sriov.nr_virtfn : 0;
3409 static void bnx2x_drv_info_fcoe_stat(struct bnx2x *bp)
3411 struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app;
3412 struct fcoe_stats_info *fcoe_stat =
3413 &bp->slowpath->drv_info_to_mcp.fcoe_stat;
3415 if (!CNIC_LOADED(bp))
3418 memcpy(fcoe_stat->mac_local + MAC_PAD, bp->fip_mac, ETH_ALEN);
3420 fcoe_stat->qos_priority =
3421 app->traffic_type_priority[LLFC_TRAFFIC_TYPE_FCOE];
3423 /* insert FCoE stats from ramrod response */
3425 struct tstorm_per_queue_stats *fcoe_q_tstorm_stats =
3426 &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)].
3427 tstorm_queue_statistics;
3429 struct xstorm_per_queue_stats *fcoe_q_xstorm_stats =
3430 &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)].
3431 xstorm_queue_statistics;
3433 struct fcoe_statistics_params *fw_fcoe_stat =
3434 &bp->fw_stats_data->fcoe;
3436 ADD_64_LE(fcoe_stat->rx_bytes_hi, LE32_0,
3437 fcoe_stat->rx_bytes_lo,
3438 fw_fcoe_stat->rx_stat0.fcoe_rx_byte_cnt);
3440 ADD_64_LE(fcoe_stat->rx_bytes_hi,
3441 fcoe_q_tstorm_stats->rcv_ucast_bytes.hi,
3442 fcoe_stat->rx_bytes_lo,
3443 fcoe_q_tstorm_stats->rcv_ucast_bytes.lo);
3445 ADD_64_LE(fcoe_stat->rx_bytes_hi,
3446 fcoe_q_tstorm_stats->rcv_bcast_bytes.hi,
3447 fcoe_stat->rx_bytes_lo,
3448 fcoe_q_tstorm_stats->rcv_bcast_bytes.lo);
3450 ADD_64_LE(fcoe_stat->rx_bytes_hi,
3451 fcoe_q_tstorm_stats->rcv_mcast_bytes.hi,
3452 fcoe_stat->rx_bytes_lo,
3453 fcoe_q_tstorm_stats->rcv_mcast_bytes.lo);
3455 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0,
3456 fcoe_stat->rx_frames_lo,
3457 fw_fcoe_stat->rx_stat0.fcoe_rx_pkt_cnt);
3459 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0,
3460 fcoe_stat->rx_frames_lo,
3461 fcoe_q_tstorm_stats->rcv_ucast_pkts);
3463 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0,
3464 fcoe_stat->rx_frames_lo,
3465 fcoe_q_tstorm_stats->rcv_bcast_pkts);
3467 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0,
3468 fcoe_stat->rx_frames_lo,
3469 fcoe_q_tstorm_stats->rcv_mcast_pkts);
3471 ADD_64_LE(fcoe_stat->tx_bytes_hi, LE32_0,
3472 fcoe_stat->tx_bytes_lo,
3473 fw_fcoe_stat->tx_stat.fcoe_tx_byte_cnt);
3475 ADD_64_LE(fcoe_stat->tx_bytes_hi,
3476 fcoe_q_xstorm_stats->ucast_bytes_sent.hi,
3477 fcoe_stat->tx_bytes_lo,
3478 fcoe_q_xstorm_stats->ucast_bytes_sent.lo);
3480 ADD_64_LE(fcoe_stat->tx_bytes_hi,
3481 fcoe_q_xstorm_stats->bcast_bytes_sent.hi,
3482 fcoe_stat->tx_bytes_lo,
3483 fcoe_q_xstorm_stats->bcast_bytes_sent.lo);
3485 ADD_64_LE(fcoe_stat->tx_bytes_hi,
3486 fcoe_q_xstorm_stats->mcast_bytes_sent.hi,
3487 fcoe_stat->tx_bytes_lo,
3488 fcoe_q_xstorm_stats->mcast_bytes_sent.lo);
3490 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0,
3491 fcoe_stat->tx_frames_lo,
3492 fw_fcoe_stat->tx_stat.fcoe_tx_pkt_cnt);
3494 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0,
3495 fcoe_stat->tx_frames_lo,
3496 fcoe_q_xstorm_stats->ucast_pkts_sent);
3498 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0,
3499 fcoe_stat->tx_frames_lo,
3500 fcoe_q_xstorm_stats->bcast_pkts_sent);
3502 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0,
3503 fcoe_stat->tx_frames_lo,
3504 fcoe_q_xstorm_stats->mcast_pkts_sent);
3507 /* ask L5 driver to add data to the struct */
3508 bnx2x_cnic_notify(bp, CNIC_CTL_FCOE_STATS_GET_CMD);
3511 static void bnx2x_drv_info_iscsi_stat(struct bnx2x *bp)
3513 struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app;
3514 struct iscsi_stats_info *iscsi_stat =
3515 &bp->slowpath->drv_info_to_mcp.iscsi_stat;
3517 if (!CNIC_LOADED(bp))
3520 memcpy(iscsi_stat->mac_local + MAC_PAD, bp->cnic_eth_dev.iscsi_mac,
3523 iscsi_stat->qos_priority =
3524 app->traffic_type_priority[LLFC_TRAFFIC_TYPE_ISCSI];
3526 /* ask L5 driver to add data to the struct */
3527 bnx2x_cnic_notify(bp, CNIC_CTL_ISCSI_STATS_GET_CMD);
3530 /* called due to MCP event (on pmf):
3531 * reread new bandwidth configuration
3533 * notify others function about the change
3535 static void bnx2x_config_mf_bw(struct bnx2x *bp)
3537 if (bp->link_vars.link_up) {
3538 bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX);
3539 bnx2x_link_sync_notify(bp);
3541 storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
3544 static void bnx2x_set_mf_bw(struct bnx2x *bp)
3546 bnx2x_config_mf_bw(bp);
3547 bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW_ACK, 0);
3550 static void bnx2x_handle_eee_event(struct bnx2x *bp)
3552 DP(BNX2X_MSG_MCP, "EEE - LLDP event\n");
3553 bnx2x_fw_command(bp, DRV_MSG_CODE_EEE_RESULTS_ACK, 0);
3556 #define BNX2X_UPDATE_DRV_INFO_IND_LENGTH (20)
3557 #define BNX2X_UPDATE_DRV_INFO_IND_COUNT (25)
3559 static void bnx2x_handle_drv_info_req(struct bnx2x *bp)
3561 enum drv_info_opcode op_code;
3562 u32 drv_info_ctl = SHMEM2_RD(bp, drv_info_control);
3563 bool release = false;
3566 /* if drv_info version supported by MFW doesn't match - send NACK */
3567 if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) {
3568 bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0);
3572 op_code = (drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >>
3573 DRV_INFO_CONTROL_OP_CODE_SHIFT;
3575 /* Must prevent other flows from accessing drv_info_to_mcp */
3576 mutex_lock(&bp->drv_info_mutex);
3578 memset(&bp->slowpath->drv_info_to_mcp, 0,
3579 sizeof(union drv_info_to_mcp));
3582 case ETH_STATS_OPCODE:
3583 bnx2x_drv_info_ether_stat(bp);
3585 case FCOE_STATS_OPCODE:
3586 bnx2x_drv_info_fcoe_stat(bp);
3588 case ISCSI_STATS_OPCODE:
3589 bnx2x_drv_info_iscsi_stat(bp);
3592 /* if op code isn't supported - send NACK */
3593 bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0);
3597 /* if we got drv_info attn from MFW then these fields are defined in
3600 SHMEM2_WR(bp, drv_info_host_addr_lo,
3601 U64_LO(bnx2x_sp_mapping(bp, drv_info_to_mcp)));
3602 SHMEM2_WR(bp, drv_info_host_addr_hi,
3603 U64_HI(bnx2x_sp_mapping(bp, drv_info_to_mcp)));
3605 bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_ACK, 0);
3607 /* Since possible management wants both this and get_driver_version
3608 * need to wait until management notifies us it finished utilizing
3611 if (!SHMEM2_HAS(bp, mfw_drv_indication)) {
3612 DP(BNX2X_MSG_MCP, "Management does not support indication\n");
3613 } else if (!bp->drv_info_mng_owner) {
3614 u32 bit = MFW_DRV_IND_READ_DONE_OFFSET((BP_ABS_FUNC(bp) >> 1));
3616 for (wait = 0; wait < BNX2X_UPDATE_DRV_INFO_IND_COUNT; wait++) {
3617 u32 indication = SHMEM2_RD(bp, mfw_drv_indication);
3619 /* Management is done; need to clear indication */
3620 if (indication & bit) {
3621 SHMEM2_WR(bp, mfw_drv_indication,
3627 msleep(BNX2X_UPDATE_DRV_INFO_IND_LENGTH);
3631 DP(BNX2X_MSG_MCP, "Management did not release indication\n");
3632 bp->drv_info_mng_owner = true;
3636 mutex_unlock(&bp->drv_info_mutex);
3639 static u32 bnx2x_update_mng_version_utility(u8 *version, bool bnx2x_format)
3645 i = sscanf(version, "1.%c%hhd.%hhd.%hhd",
3646 &vals[0], &vals[1], &vals[2], &vals[3]);
3650 i = sscanf(version, "%hhd.%hhd.%hhd.%hhd",
3651 &vals[0], &vals[1], &vals[2], &vals[3]);
3657 return (vals[0] << 24) | (vals[1] << 16) | (vals[2] << 8) | vals[3];
3660 void bnx2x_update_mng_version(struct bnx2x *bp)
3662 u32 iscsiver = DRV_VER_NOT_LOADED;
3663 u32 fcoever = DRV_VER_NOT_LOADED;
3664 u32 ethver = DRV_VER_NOT_LOADED;
3665 int idx = BP_FW_MB_IDX(bp);
3668 if (!SHMEM2_HAS(bp, func_os_drv_ver))
3671 mutex_lock(&bp->drv_info_mutex);
3672 /* Must not proceed when `bnx2x_handle_drv_info_req' is feasible */
3673 if (bp->drv_info_mng_owner)
3676 if (bp->state != BNX2X_STATE_OPEN)
3679 /* Parse ethernet driver version */
3680 ethver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true);
3681 if (!CNIC_LOADED(bp))
3684 /* Try getting storage driver version via cnic */
3685 memset(&bp->slowpath->drv_info_to_mcp, 0,
3686 sizeof(union drv_info_to_mcp));
3687 bnx2x_drv_info_iscsi_stat(bp);
3688 version = bp->slowpath->drv_info_to_mcp.iscsi_stat.version;
3689 iscsiver = bnx2x_update_mng_version_utility(version, false);
3691 memset(&bp->slowpath->drv_info_to_mcp, 0,
3692 sizeof(union drv_info_to_mcp));
3693 bnx2x_drv_info_fcoe_stat(bp);
3694 version = bp->slowpath->drv_info_to_mcp.fcoe_stat.version;
3695 fcoever = bnx2x_update_mng_version_utility(version, false);
3698 SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ETHERNET], ethver);
3699 SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ISCSI], iscsiver);
3700 SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_FCOE], fcoever);
3702 mutex_unlock(&bp->drv_info_mutex);
3704 DP(BNX2X_MSG_MCP, "Setting driver version: ETH [%08x] iSCSI [%08x] FCoE [%08x]\n",
3705 ethver, iscsiver, fcoever);
3708 void bnx2x_update_mfw_dump(struct bnx2x *bp)
3713 if (!SHMEM2_HAS(bp, drv_info))
3716 /* Update Driver load time, possibly broken in y2038 */
3717 SHMEM2_WR(bp, drv_info.epoc, (u32)ktime_get_real_seconds());
3719 drv_ver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true);
3720 SHMEM2_WR(bp, drv_info.drv_ver, drv_ver);
3722 SHMEM2_WR(bp, drv_info.fw_ver, REG_RD(bp, XSEM_REG_PRAM));
3724 /* Check & notify On-Chip dump. */
3725 valid_dump = SHMEM2_RD(bp, drv_info.valid_dump);
3727 if (valid_dump & FIRST_DUMP_VALID)
3728 DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 1st partition\n");
3730 if (valid_dump & SECOND_DUMP_VALID)
3731 DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 2nd partition\n");
3734 static void bnx2x_oem_event(struct bnx2x *bp, u32 event)
3736 u32 cmd_ok, cmd_fail;
3739 if (event & DRV_STATUS_DCC_EVENT_MASK &&
3740 event & DRV_STATUS_OEM_EVENT_MASK) {
3741 BNX2X_ERR("Received simultaneous events %08x\n", event);
3745 if (event & DRV_STATUS_DCC_EVENT_MASK) {
3746 cmd_fail = DRV_MSG_CODE_DCC_FAILURE;
3747 cmd_ok = DRV_MSG_CODE_DCC_OK;
3748 } else /* if (event & DRV_STATUS_OEM_EVENT_MASK) */ {
3749 cmd_fail = DRV_MSG_CODE_OEM_FAILURE;
3750 cmd_ok = DRV_MSG_CODE_OEM_OK;
3753 DP(BNX2X_MSG_MCP, "oem_event 0x%x\n", event);
3755 if (event & (DRV_STATUS_DCC_DISABLE_ENABLE_PF |
3756 DRV_STATUS_OEM_DISABLE_ENABLE_PF)) {
3757 /* This is the only place besides the function initialization
3758 * where the bp->flags can change so it is done without any
3761 if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) {
3762 DP(BNX2X_MSG_MCP, "mf_cfg function disabled\n");
3763 bp->flags |= MF_FUNC_DIS;
3765 bnx2x_e1h_disable(bp);
3767 DP(BNX2X_MSG_MCP, "mf_cfg function enabled\n");
3768 bp->flags &= ~MF_FUNC_DIS;
3770 bnx2x_e1h_enable(bp);
3772 event &= ~(DRV_STATUS_DCC_DISABLE_ENABLE_PF |
3773 DRV_STATUS_OEM_DISABLE_ENABLE_PF);
3776 if (event & (DRV_STATUS_DCC_BANDWIDTH_ALLOCATION |
3777 DRV_STATUS_OEM_BANDWIDTH_ALLOCATION)) {
3778 bnx2x_config_mf_bw(bp);
3779 event &= ~(DRV_STATUS_DCC_BANDWIDTH_ALLOCATION |
3780 DRV_STATUS_OEM_BANDWIDTH_ALLOCATION);
3783 /* Report results to MCP */
3785 bnx2x_fw_command(bp, cmd_fail, 0);
3787 bnx2x_fw_command(bp, cmd_ok, 0);
3790 /* must be called under the spq lock */
3791 static struct eth_spe *bnx2x_sp_get_next(struct bnx2x *bp)
3793 struct eth_spe *next_spe = bp->spq_prod_bd;
3795 if (bp->spq_prod_bd == bp->spq_last_bd) {
3796 bp->spq_prod_bd = bp->spq;
3797 bp->spq_prod_idx = 0;
3798 DP(BNX2X_MSG_SP, "end of spq\n");
3806 /* must be called under the spq lock */
3807 static void bnx2x_sp_prod_update(struct bnx2x *bp)
3809 int func = BP_FUNC(bp);
3812 * Make sure that BD data is updated before writing the producer:
3813 * BD data is written to the memory, the producer is read from the
3814 * memory, thus we need a full memory barrier to ensure the ordering.
3818 REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
3824 * bnx2x_is_contextless_ramrod - check if the current command ends on EQ
3826 * @cmd: command to check
3827 * @cmd_type: command type
3829 static bool bnx2x_is_contextless_ramrod(int cmd, int cmd_type)
3831 if ((cmd_type == NONE_CONNECTION_TYPE) ||
3832 (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) ||
3833 (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) ||
3834 (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) ||
3835 (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) ||
3836 (cmd == RAMROD_CMD_ID_ETH_SET_MAC) ||
3837 (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE))
3844 * bnx2x_sp_post - place a single command on an SP ring
3846 * @bp: driver handle
3847 * @command: command to place (e.g. SETUP, FILTER_RULES, etc.)
3848 * @cid: SW CID the command is related to
3849 * @data_hi: command private data address (high 32 bits)
3850 * @data_lo: command private data address (low 32 bits)
3851 * @cmd_type: command type (e.g. NONE, ETH)
3853 * SP data is handled as if it's always an address pair, thus data fields are
3854 * not swapped to little endian in upper functions. Instead this function swaps
3855 * data as if it's two u32 fields.
3857 int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
3858 u32 data_hi, u32 data_lo, int cmd_type)
3860 struct eth_spe *spe;
3862 bool common = bnx2x_is_contextless_ramrod(command, cmd_type);
3864 #ifdef BNX2X_STOP_ON_ERROR
3865 if (unlikely(bp->panic)) {
3866 BNX2X_ERR("Can't post SP when there is panic\n");
3871 spin_lock_bh(&bp->spq_lock);
3874 if (!atomic_read(&bp->eq_spq_left)) {
3875 BNX2X_ERR("BUG! EQ ring full!\n");
3876 spin_unlock_bh(&bp->spq_lock);
3880 } else if (!atomic_read(&bp->cq_spq_left)) {
3881 BNX2X_ERR("BUG! SPQ ring full!\n");
3882 spin_unlock_bh(&bp->spq_lock);
3887 spe = bnx2x_sp_get_next(bp);
3889 /* CID needs port number to be encoded int it */
3890 spe->hdr.conn_and_cmd_data =
3891 cpu_to_le32((command << SPE_HDR_CMD_ID_SHIFT) |
3894 /* In some cases, type may already contain the func-id
3895 * mainly in SRIOV related use cases, so we add it here only
3896 * if it's not already set.
3898 if (!(cmd_type & SPE_HDR_FUNCTION_ID)) {
3899 type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) &
3901 type |= ((BP_FUNC(bp) << SPE_HDR_FUNCTION_ID_SHIFT) &
3902 SPE_HDR_FUNCTION_ID);
3907 spe->hdr.type = cpu_to_le16(type);
3909 spe->data.update_data_addr.hi = cpu_to_le32(data_hi);
3910 spe->data.update_data_addr.lo = cpu_to_le32(data_lo);
3913 * It's ok if the actual decrement is issued towards the memory
3914 * somewhere between the spin_lock and spin_unlock. Thus no
3915 * more explicit memory barrier is needed.
3918 atomic_dec(&bp->eq_spq_left);
3920 atomic_dec(&bp->cq_spq_left);
3923 "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x data (%x:%x) type(0x%x) left (CQ, EQ) (%x,%x)\n",
3924 bp->spq_prod_idx, (u32)U64_HI(bp->spq_mapping),
3925 (u32)(U64_LO(bp->spq_mapping) +
3926 (void *)bp->spq_prod_bd - (void *)bp->spq), command, common,
3927 HW_CID(bp, cid), data_hi, data_lo, type,
3928 atomic_read(&bp->cq_spq_left), atomic_read(&bp->eq_spq_left));
3930 bnx2x_sp_prod_update(bp);
3931 spin_unlock_bh(&bp->spq_lock);
3935 /* acquire split MCP access lock register */
3936 static int bnx2x_acquire_alr(struct bnx2x *bp)
3942 for (j = 0; j < 1000; j++) {
3943 REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, MCPR_ACCESS_LOCK_LOCK);
3944 val = REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK);
3945 if (val & MCPR_ACCESS_LOCK_LOCK)
3948 usleep_range(5000, 10000);
3950 if (!(val & MCPR_ACCESS_LOCK_LOCK)) {
3951 BNX2X_ERR("Cannot acquire MCP access lock register\n");
3958 /* release split MCP access lock register */
3959 static void bnx2x_release_alr(struct bnx2x *bp)
3961 REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, 0);
3964 #define BNX2X_DEF_SB_ATT_IDX 0x0001
3965 #define BNX2X_DEF_SB_IDX 0x0002
3967 static u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
3969 struct host_sp_status_block *def_sb = bp->def_status_blk;
3972 barrier(); /* status block is written to by the chip */
3973 if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
3974 bp->def_att_idx = def_sb->atten_status_block.attn_bits_index;
3975 rc |= BNX2X_DEF_SB_ATT_IDX;
3978 if (bp->def_idx != def_sb->sp_sb.running_index) {
3979 bp->def_idx = def_sb->sp_sb.running_index;
3980 rc |= BNX2X_DEF_SB_IDX;
3983 /* Do not reorder: indices reading should complete before handling */
3989 * slow path service functions
3992 static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
3994 int port = BP_PORT(bp);
3995 u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
3996 MISC_REG_AEU_MASK_ATTN_FUNC_0;
3997 u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
3998 NIG_REG_MASK_INTERRUPT_PORT0;
4003 if (bp->attn_state & asserted)
4004 BNX2X_ERR("IGU ERROR\n");
4006 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
4007 aeu_mask = REG_RD(bp, aeu_addr);
4009 DP(NETIF_MSG_HW, "aeu_mask %x newly asserted %x\n",
4010 aeu_mask, asserted);
4011 aeu_mask &= ~(asserted & 0x3ff);
4012 DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
4014 REG_WR(bp, aeu_addr, aeu_mask);
4015 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
4017 DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
4018 bp->attn_state |= asserted;
4019 DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
4021 if (asserted & ATTN_HARD_WIRED_MASK) {
4022 if (asserted & ATTN_NIG_FOR_FUNC) {
4024 bnx2x_acquire_phy_lock(bp);
4026 /* save nig interrupt mask */
4027 nig_mask = REG_RD(bp, nig_int_mask_addr);
4029 /* If nig_mask is not set, no need to call the update
4033 REG_WR(bp, nig_int_mask_addr, 0);
4035 bnx2x_link_attn(bp);
4038 /* handle unicore attn? */
4040 if (asserted & ATTN_SW_TIMER_4_FUNC)
4041 DP(NETIF_MSG_HW, "ATTN_SW_TIMER_4_FUNC!\n");
4043 if (asserted & GPIO_2_FUNC)
4044 DP(NETIF_MSG_HW, "GPIO_2_FUNC!\n");
4046 if (asserted & GPIO_3_FUNC)
4047 DP(NETIF_MSG_HW, "GPIO_3_FUNC!\n");
4049 if (asserted & GPIO_4_FUNC)
4050 DP(NETIF_MSG_HW, "GPIO_4_FUNC!\n");
4053 if (asserted & ATTN_GENERAL_ATTN_1) {
4054 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_1!\n");
4055 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
4057 if (asserted & ATTN_GENERAL_ATTN_2) {
4058 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_2!\n");
4059 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
4061 if (asserted & ATTN_GENERAL_ATTN_3) {
4062 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_3!\n");
4063 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
4066 if (asserted & ATTN_GENERAL_ATTN_4) {
4067 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_4!\n");
4068 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
4070 if (asserted & ATTN_GENERAL_ATTN_5) {
4071 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_5!\n");
4072 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
4074 if (asserted & ATTN_GENERAL_ATTN_6) {
4075 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_6!\n");
4076 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
4080 } /* if hardwired */
4082 if (bp->common.int_block == INT_BLOCK_HC)
4083 reg_addr = (HC_REG_COMMAND_REG + port*32 +
4084 COMMAND_REG_ATTN_BITS_SET);
4086 reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER*8);
4088 DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", asserted,
4089 (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr);
4090 REG_WR(bp, reg_addr, asserted);
4092 /* now set back the mask */
4093 if (asserted & ATTN_NIG_FOR_FUNC) {
4094 /* Verify that IGU ack through BAR was written before restoring
4095 * NIG mask. This loop should exit after 2-3 iterations max.
4097 if (bp->common.int_block != INT_BLOCK_HC) {
4098 u32 cnt = 0, igu_acked;
4100 igu_acked = REG_RD(bp,
4101 IGU_REG_ATTENTION_ACK_BITS);
4102 } while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0) &&
4103 (++cnt < MAX_IGU_ATTN_ACK_TO));
4106 "Failed to verify IGU ack on time\n");
4109 REG_WR(bp, nig_int_mask_addr, nig_mask);
4110 bnx2x_release_phy_lock(bp);
4114 static void bnx2x_fan_failure(struct bnx2x *bp)
4116 int port = BP_PORT(bp);
4118 /* mark the failure */
4121 dev_info.port_hw_config[port].external_phy_config);
4123 ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
4124 ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
4125 SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config,
4128 /* log the failure */
4129 netdev_err(bp->dev, "Fan Failure on Network Controller has caused the driver to shutdown the card to prevent permanent damage.\n"
4130 "Please contact OEM Support for assistance\n");
4132 /* Schedule device reset (unload)
4133 * This is due to some boards consuming sufficient power when driver is
4134 * up to overheat if fan fails.
4136 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_FAN_FAILURE, 0);
4139 static void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
4141 int port = BP_PORT(bp);
4145 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
4146 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
4148 if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
4150 val = REG_RD(bp, reg_offset);
4151 val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
4152 REG_WR(bp, reg_offset, val);
4154 BNX2X_ERR("SPIO5 hw attention\n");
4156 /* Fan failure attention */
4157 bnx2x_hw_reset_phy(&bp->link_params);
4158 bnx2x_fan_failure(bp);
4161 if ((attn & bp->link_vars.aeu_int_mask) && bp->port.pmf) {
4162 bnx2x_acquire_phy_lock(bp);
4163 bnx2x_handle_module_detect_int(&bp->link_params);
4164 bnx2x_release_phy_lock(bp);
4167 if (attn & HW_INTERRUT_ASSERT_SET_0) {
4169 val = REG_RD(bp, reg_offset);
4170 val &= ~(attn & HW_INTERRUT_ASSERT_SET_0);
4171 REG_WR(bp, reg_offset, val);
4173 BNX2X_ERR("FATAL HW block attention set0 0x%x\n",
4174 (u32)(attn & HW_INTERRUT_ASSERT_SET_0));
4179 static void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn)
4183 if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
4185 val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR);
4186 BNX2X_ERR("DB hw attention 0x%x\n", val);
4187 /* DORQ discard attention */
4189 BNX2X_ERR("FATAL error from DORQ\n");
4192 if (attn & HW_INTERRUT_ASSERT_SET_1) {
4194 int port = BP_PORT(bp);
4197 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
4198 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1);
4200 val = REG_RD(bp, reg_offset);
4201 val &= ~(attn & HW_INTERRUT_ASSERT_SET_1);
4202 REG_WR(bp, reg_offset, val);
4204 BNX2X_ERR("FATAL HW block attention set1 0x%x\n",
4205 (u32)(attn & HW_INTERRUT_ASSERT_SET_1));
4210 static void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn)
4214 if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
4216 val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR);
4217 BNX2X_ERR("CFC hw attention 0x%x\n", val);
4218 /* CFC error attention */
4220 BNX2X_ERR("FATAL error from CFC\n");
4223 if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
4224 val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0);
4225 BNX2X_ERR("PXP hw attention-0 0x%x\n", val);
4226 /* RQ_USDMDP_FIFO_OVERFLOW */
4228 BNX2X_ERR("FATAL error from PXP\n");
4230 if (!CHIP_IS_E1x(bp)) {
4231 val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_1);
4232 BNX2X_ERR("PXP hw attention-1 0x%x\n", val);
4236 if (attn & HW_INTERRUT_ASSERT_SET_2) {
4238 int port = BP_PORT(bp);
4241 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
4242 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2);
4244 val = REG_RD(bp, reg_offset);
4245 val &= ~(attn & HW_INTERRUT_ASSERT_SET_2);
4246 REG_WR(bp, reg_offset, val);
4248 BNX2X_ERR("FATAL HW block attention set2 0x%x\n",
4249 (u32)(attn & HW_INTERRUT_ASSERT_SET_2));
4254 static void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
4258 if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
4260 if (attn & BNX2X_PMF_LINK_ASSERT) {
4261 int func = BP_FUNC(bp);
4263 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
4264 bnx2x_read_mf_cfg(bp);
4265 bp->mf_config[BP_VN(bp)] = MF_CFG_RD(bp,
4266 func_mf_config[BP_ABS_FUNC(bp)].config);
4268 func_mb[BP_FW_MB_IDX(bp)].drv_status);
4270 if (val & (DRV_STATUS_DCC_EVENT_MASK |
4271 DRV_STATUS_OEM_EVENT_MASK))
4273 (val & (DRV_STATUS_DCC_EVENT_MASK |
4274 DRV_STATUS_OEM_EVENT_MASK)));
4276 if (val & DRV_STATUS_SET_MF_BW)
4277 bnx2x_set_mf_bw(bp);
4279 if (val & DRV_STATUS_DRV_INFO_REQ)
4280 bnx2x_handle_drv_info_req(bp);
4282 if (val & DRV_STATUS_VF_DISABLED)
4283 bnx2x_schedule_iov_task(bp,
4284 BNX2X_IOV_HANDLE_FLR);
4286 if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF))
4287 bnx2x_pmf_update(bp);
4290 (val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) &&
4291 bp->dcbx_enabled > 0)
4292 /* start dcbx state machine */
4293 bnx2x_dcbx_set_params(bp,
4294 BNX2X_DCBX_STATE_NEG_RECEIVED);
4295 if (val & DRV_STATUS_AFEX_EVENT_MASK)
4296 bnx2x_handle_afex_cmd(bp,
4297 val & DRV_STATUS_AFEX_EVENT_MASK);
4298 if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS)
4299 bnx2x_handle_eee_event(bp);
4301 if (val & DRV_STATUS_OEM_UPDATE_SVID)
4302 bnx2x_handle_update_svid_cmd(bp);
4304 if (bp->link_vars.periodic_flags &
4305 PERIODIC_FLAGS_LINK_EVENT) {
4306 /* sync with link */
4307 bnx2x_acquire_phy_lock(bp);
4308 bp->link_vars.periodic_flags &=
4309 ~PERIODIC_FLAGS_LINK_EVENT;
4310 bnx2x_release_phy_lock(bp);
4312 bnx2x_link_sync_notify(bp);
4313 bnx2x_link_report(bp);
4315 /* Always call it here: bnx2x_link_report() will
4316 * prevent the link indication duplication.
4318 bnx2x__link_status_update(bp);
4319 } else if (attn & BNX2X_MC_ASSERT_BITS) {
4321 BNX2X_ERR("MC assert!\n");
4322 bnx2x_mc_assert(bp);
4323 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0);
4324 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0);
4325 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0);
4326 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0);
4329 } else if (attn & BNX2X_MCP_ASSERT) {
4331 BNX2X_ERR("MCP assert!\n");
4332 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0);
4336 BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn);
4339 if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
4340 BNX2X_ERR("LATCHED attention 0x%08x (masked)\n", attn);
4341 if (attn & BNX2X_GRC_TIMEOUT) {
4342 val = CHIP_IS_E1(bp) ? 0 :
4343 REG_RD(bp, MISC_REG_GRC_TIMEOUT_ATTN);
4344 BNX2X_ERR("GRC time-out 0x%08x\n", val);
4346 if (attn & BNX2X_GRC_RSV) {
4347 val = CHIP_IS_E1(bp) ? 0 :
4348 REG_RD(bp, MISC_REG_GRC_RSV_ATTN);
4349 BNX2X_ERR("GRC reserved 0x%08x\n", val);
4351 REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
4357 * 0-7 - Engine0 load counter.
4358 * 8-15 - Engine1 load counter.
4359 * 16 - Engine0 RESET_IN_PROGRESS bit.
4360 * 17 - Engine1 RESET_IN_PROGRESS bit.
4361 * 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active function
4363 * 19 - Engine1 ONE_IS_LOADED.
4364 * 20 - Chip reset flow bit. When set none-leader must wait for both engines
4365 * leader to complete (check for both RESET_IN_PROGRESS bits and not for
4366 * just the one belonging to its engine).
4369 #define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1
4371 #define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff
4372 #define BNX2X_PATH0_LOAD_CNT_SHIFT 0
4373 #define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00
4374 #define BNX2X_PATH1_LOAD_CNT_SHIFT 8
4375 #define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000
4376 #define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000
4377 #define BNX2X_GLOBAL_RESET_BIT 0x00040000
4380 * Set the GLOBAL_RESET bit.
4382 * Should be run under rtnl lock
4384 void bnx2x_set_reset_global(struct bnx2x *bp)
4387 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4388 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4389 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT);
4390 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4394 * Clear the GLOBAL_RESET bit.
4396 * Should be run under rtnl lock
4398 static void bnx2x_clear_reset_global(struct bnx2x *bp)
4401 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4402 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4403 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT));
4404 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4408 * Checks the GLOBAL_RESET bit.
4410 * should be run under rtnl lock
4412 static bool bnx2x_reset_is_global(struct bnx2x *bp)
4414 u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4416 DP(NETIF_MSG_HW, "GEN_REG_VAL=0x%08x\n", val);
4417 return (val & BNX2X_GLOBAL_RESET_BIT) ? true : false;
4421 * Clear RESET_IN_PROGRESS bit for the current engine.
4423 * Should be run under rtnl lock
4425 static void bnx2x_set_reset_done(struct bnx2x *bp)
4428 u32 bit = BP_PATH(bp) ?
4429 BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT;
4430 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4431 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4435 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
4437 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4441 * Set RESET_IN_PROGRESS for the current engine.
4443 * should be run under rtnl lock
4445 void bnx2x_set_reset_in_progress(struct bnx2x *bp)
4448 u32 bit = BP_PATH(bp) ?
4449 BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT;
4450 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4451 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4455 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
4456 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4460 * Checks the RESET_IN_PROGRESS bit for the given engine.
4461 * should be run under rtnl lock
4463 bool bnx2x_reset_is_done(struct bnx2x *bp, int engine)
4465 u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4467 BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT;
4469 /* return false if bit is set */
4470 return (val & bit) ? false : true;
4474 * set pf load for the current pf.
4476 * should be run under rtnl lock
4478 void bnx2x_set_pf_load(struct bnx2x *bp)
4481 u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK :
4482 BNX2X_PATH0_LOAD_CNT_MASK;
4483 u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
4484 BNX2X_PATH0_LOAD_CNT_SHIFT;
4486 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4487 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4489 DP(NETIF_MSG_IFUP, "Old GEN_REG_VAL=0x%08x\n", val);
4491 /* get the current counter value */
4492 val1 = (val & mask) >> shift;
4494 /* set bit of that PF */
4495 val1 |= (1 << bp->pf_num);
4497 /* clear the old value */
4500 /* set the new one */
4501 val |= ((val1 << shift) & mask);
4503 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
4504 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4508 * bnx2x_clear_pf_load - clear pf load mark
4510 * @bp: driver handle
4512 * Should be run under rtnl lock.
4513 * Decrements the load counter for the current engine. Returns
4514 * whether other functions are still loaded
4516 bool bnx2x_clear_pf_load(struct bnx2x *bp)
4519 u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK :
4520 BNX2X_PATH0_LOAD_CNT_MASK;
4521 u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
4522 BNX2X_PATH0_LOAD_CNT_SHIFT;
4524 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4525 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4526 DP(NETIF_MSG_IFDOWN, "Old GEN_REG_VAL=0x%08x\n", val);
4528 /* get the current counter value */
4529 val1 = (val & mask) >> shift;
4531 /* clear bit of that PF */
4532 val1 &= ~(1 << bp->pf_num);
4534 /* clear the old value */
4537 /* set the new one */
4538 val |= ((val1 << shift) & mask);
4540 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
4541 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4546 * Read the load status for the current engine.
4548 * should be run under rtnl lock
4550 static bool bnx2x_get_load_status(struct bnx2x *bp, int engine)
4552 u32 mask = (engine ? BNX2X_PATH1_LOAD_CNT_MASK :
4553 BNX2X_PATH0_LOAD_CNT_MASK);
4554 u32 shift = (engine ? BNX2X_PATH1_LOAD_CNT_SHIFT :
4555 BNX2X_PATH0_LOAD_CNT_SHIFT);
4556 u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4558 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "GLOB_REG=0x%08x\n", val);
4560 val = (val & mask) >> shift;
4562 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "load mask for engine %d = 0x%x\n",
4568 static void _print_parity(struct bnx2x *bp, u32 reg)
4570 pr_cont(" [0x%08x] ", REG_RD(bp, reg));
4573 static void _print_next_block(int idx, const char *blk)
4575 pr_cont("%s%s", idx ? ", " : "", blk);
4578 static bool bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig,
4579 int *par_num, bool print)
4587 for (i = 0; sig; i++) {
4588 cur_bit = (0x1UL << i);
4589 if (sig & cur_bit) {
4590 res |= true; /* Each bit is real error! */
4594 case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
4595 _print_next_block((*par_num)++, "BRB");
4597 BRB1_REG_BRB1_PRTY_STS);
4599 case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
4600 _print_next_block((*par_num)++,
4602 _print_parity(bp, PRS_REG_PRS_PRTY_STS);
4604 case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
4605 _print_next_block((*par_num)++, "TSDM");
4607 TSDM_REG_TSDM_PRTY_STS);
4609 case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
4610 _print_next_block((*par_num)++,
4612 _print_parity(bp, SRC_REG_SRC_PRTY_STS);
4614 case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
4615 _print_next_block((*par_num)++, "TCM");
4616 _print_parity(bp, TCM_REG_TCM_PRTY_STS);
4618 case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
4619 _print_next_block((*par_num)++,
4622 TSEM_REG_TSEM_PRTY_STS_0);
4624 TSEM_REG_TSEM_PRTY_STS_1);
4626 case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
4627 _print_next_block((*par_num)++, "XPB");
4628 _print_parity(bp, GRCBASE_XPB +
4629 PB_REG_PB_PRTY_STS);
4642 static bool bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig,
4643 int *par_num, bool *global,
4652 for (i = 0; sig; i++) {
4653 cur_bit = (0x1UL << i);
4654 if (sig & cur_bit) {
4655 res |= true; /* Each bit is real error! */
4657 case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR:
4659 _print_next_block((*par_num)++, "PBF");
4660 _print_parity(bp, PBF_REG_PBF_PRTY_STS);
4663 case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
4665 _print_next_block((*par_num)++, "QM");
4666 _print_parity(bp, QM_REG_QM_PRTY_STS);
4669 case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR:
4671 _print_next_block((*par_num)++, "TM");
4672 _print_parity(bp, TM_REG_TM_PRTY_STS);
4675 case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
4677 _print_next_block((*par_num)++, "XSDM");
4679 XSDM_REG_XSDM_PRTY_STS);
4682 case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR:
4684 _print_next_block((*par_num)++, "XCM");
4685 _print_parity(bp, XCM_REG_XCM_PRTY_STS);
4688 case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
4690 _print_next_block((*par_num)++,
4693 XSEM_REG_XSEM_PRTY_STS_0);
4695 XSEM_REG_XSEM_PRTY_STS_1);
4698 case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
4700 _print_next_block((*par_num)++,
4703 DORQ_REG_DORQ_PRTY_STS);
4706 case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR:
4708 _print_next_block((*par_num)++, "NIG");
4709 if (CHIP_IS_E1x(bp)) {
4711 NIG_REG_NIG_PRTY_STS);
4714 NIG_REG_NIG_PRTY_STS_0);
4716 NIG_REG_NIG_PRTY_STS_1);
4720 case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
4722 _print_next_block((*par_num)++,
4726 case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
4728 _print_next_block((*par_num)++,
4730 _print_parity(bp, DBG_REG_DBG_PRTY_STS);
4733 case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
4735 _print_next_block((*par_num)++, "USDM");
4737 USDM_REG_USDM_PRTY_STS);
4740 case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR:
4742 _print_next_block((*par_num)++, "UCM");
4743 _print_parity(bp, UCM_REG_UCM_PRTY_STS);
4746 case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
4748 _print_next_block((*par_num)++,
4751 USEM_REG_USEM_PRTY_STS_0);
4753 USEM_REG_USEM_PRTY_STS_1);
4756 case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
4758 _print_next_block((*par_num)++, "UPB");
4759 _print_parity(bp, GRCBASE_UPB +
4760 PB_REG_PB_PRTY_STS);
4763 case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
4765 _print_next_block((*par_num)++, "CSDM");
4767 CSDM_REG_CSDM_PRTY_STS);
4770 case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR:
4772 _print_next_block((*par_num)++, "CCM");
4773 _print_parity(bp, CCM_REG_CCM_PRTY_STS);
4786 static bool bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig,
4787 int *par_num, bool print)
4795 for (i = 0; sig; i++) {
4796 cur_bit = (0x1UL << i);
4797 if (sig & cur_bit) {
4798 res = true; /* Each bit is real error! */
4801 case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
4802 _print_next_block((*par_num)++,
4805 CSEM_REG_CSEM_PRTY_STS_0);
4807 CSEM_REG_CSEM_PRTY_STS_1);
4809 case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
4810 _print_next_block((*par_num)++, "PXP");
4811 _print_parity(bp, PXP_REG_PXP_PRTY_STS);
4813 PXP2_REG_PXP2_PRTY_STS_0);
4815 PXP2_REG_PXP2_PRTY_STS_1);
4817 case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
4818 _print_next_block((*par_num)++,
4819 "PXPPCICLOCKCLIENT");
4821 case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
4822 _print_next_block((*par_num)++, "CFC");
4824 CFC_REG_CFC_PRTY_STS);
4826 case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
4827 _print_next_block((*par_num)++, "CDU");
4828 _print_parity(bp, CDU_REG_CDU_PRTY_STS);
4830 case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
4831 _print_next_block((*par_num)++, "DMAE");
4833 DMAE_REG_DMAE_PRTY_STS);
4835 case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
4836 _print_next_block((*par_num)++, "IGU");
4837 if (CHIP_IS_E1x(bp))
4839 HC_REG_HC_PRTY_STS);
4842 IGU_REG_IGU_PRTY_STS);
4844 case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
4845 _print_next_block((*par_num)++, "MISC");
4847 MISC_REG_MISC_PRTY_STS);
4860 static bool bnx2x_check_blocks_with_parity3(struct bnx2x *bp, u32 sig,
4861 int *par_num, bool *global,
4868 for (i = 0; sig; i++) {
4869 cur_bit = (0x1UL << i);
4870 if (sig & cur_bit) {
4872 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
4874 _print_next_block((*par_num)++,
4879 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
4881 _print_next_block((*par_num)++,
4886 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
4888 _print_next_block((*par_num)++,
4893 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
4895 /* clear latched SCPAD PATIRY from MCP */
4896 REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL,
4909 static bool bnx2x_check_blocks_with_parity4(struct bnx2x *bp, u32 sig,
4910 int *par_num, bool print)
4918 for (i = 0; sig; i++) {
4919 cur_bit = (0x1UL << i);
4920 if (sig & cur_bit) {
4921 res = true; /* Each bit is real error! */
4924 case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
4925 _print_next_block((*par_num)++,
4928 PGLUE_B_REG_PGLUE_B_PRTY_STS);
4930 case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
4931 _print_next_block((*par_num)++, "ATC");
4933 ATC_REG_ATC_PRTY_STS);
4945 static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print,
4950 if ((sig[0] & HW_PRTY_ASSERT_SET_0) ||
4951 (sig[1] & HW_PRTY_ASSERT_SET_1) ||
4952 (sig[2] & HW_PRTY_ASSERT_SET_2) ||
4953 (sig[3] & HW_PRTY_ASSERT_SET_3) ||
4954 (sig[4] & HW_PRTY_ASSERT_SET_4)) {
4957 DP(NETIF_MSG_HW, "Was parity error: HW block parity attention:\n"
4958 "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x\n",
4959 sig[0] & HW_PRTY_ASSERT_SET_0,
4960 sig[1] & HW_PRTY_ASSERT_SET_1,
4961 sig[2] & HW_PRTY_ASSERT_SET_2,
4962 sig[3] & HW_PRTY_ASSERT_SET_3,
4963 sig[4] & HW_PRTY_ASSERT_SET_4);
4965 if (((sig[0] & HW_PRTY_ASSERT_SET_0) ||
4966 (sig[1] & HW_PRTY_ASSERT_SET_1) ||
4967 (sig[2] & HW_PRTY_ASSERT_SET_2) ||
4968 (sig[4] & HW_PRTY_ASSERT_SET_4)) ||
4969 (sig[3] & HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD)) {
4971 "Parity errors detected in blocks: ");
4976 res |= bnx2x_check_blocks_with_parity0(bp,
4977 sig[0] & HW_PRTY_ASSERT_SET_0, &par_num, print);
4978 res |= bnx2x_check_blocks_with_parity1(bp,
4979 sig[1] & HW_PRTY_ASSERT_SET_1, &par_num, global, print);
4980 res |= bnx2x_check_blocks_with_parity2(bp,
4981 sig[2] & HW_PRTY_ASSERT_SET_2, &par_num, print);
4982 res |= bnx2x_check_blocks_with_parity3(bp,
4983 sig[3] & HW_PRTY_ASSERT_SET_3, &par_num, global, print);
4984 res |= bnx2x_check_blocks_with_parity4(bp,
4985 sig[4] & HW_PRTY_ASSERT_SET_4, &par_num, print);
4995 * bnx2x_chk_parity_attn - checks for parity attentions.
4997 * @bp: driver handle
4998 * @global: true if there was a global attention
4999 * @print: show parity attention in syslog
5001 bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print)
5003 struct attn_route attn = { {0} };
5004 int port = BP_PORT(bp);
5006 attn.sig[0] = REG_RD(bp,
5007 MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 +
5009 attn.sig[1] = REG_RD(bp,
5010 MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 +
5012 attn.sig[2] = REG_RD(bp,
5013 MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 +
5015 attn.sig[3] = REG_RD(bp,
5016 MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 +
5018 /* Since MCP attentions can't be disabled inside the block, we need to
5019 * read AEU registers to see whether they're currently disabled
5021 attn.sig[3] &= ((REG_RD(bp,
5022 !port ? MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0
5023 : MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0) &
5024 MISC_AEU_ENABLE_MCP_PRTY_BITS) |
5025 ~MISC_AEU_ENABLE_MCP_PRTY_BITS);
5027 if (!CHIP_IS_E1x(bp))
5028 attn.sig[4] = REG_RD(bp,
5029 MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 +
5032 return bnx2x_parity_attn(bp, global, print, attn.sig);
5035 static void bnx2x_attn_int_deasserted4(struct bnx2x *bp, u32 attn)
5038 if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) {
5040 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS_CLR);
5041 BNX2X_ERR("PGLUE hw attention 0x%x\n", val);
5042 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR)
5043 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR\n");
5044 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR)
5045 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR\n");
5046 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN)
5047 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN\n");
5048 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN)
5049 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN\n");
5051 PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN)
5052 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN\n");
5054 PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN)
5055 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN\n");
5056 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN)
5057 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN\n");
5058 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN)
5059 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN\n");
5060 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW)
5061 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW\n");
5063 if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) {
5064 val = REG_RD(bp, ATC_REG_ATC_INT_STS_CLR);
5065 BNX2X_ERR("ATC hw attention 0x%x\n", val);
5066 if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR)
5067 BNX2X_ERR("ATC_ATC_INT_STS_REG_ADDRESS_ERROR\n");
5068 if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND)
5069 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND\n");
5070 if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS)
5071 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS\n");
5072 if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT)
5073 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT\n");
5074 if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR)
5075 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR\n");
5076 if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU)
5077 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU\n");
5080 if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
5081 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) {
5082 BNX2X_ERR("FATAL parity attention set4 0x%x\n",
5083 (u32)(attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
5084 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)));
5088 static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
5090 struct attn_route attn, *group_mask;
5091 int port = BP_PORT(bp);
5096 bool global = false;
5098 /* need to take HW lock because MCP or other port might also
5099 try to handle this event */
5100 bnx2x_acquire_alr(bp);
5102 if (bnx2x_chk_parity_attn(bp, &global, true)) {
5103 #ifndef BNX2X_STOP_ON_ERROR
5104 bp->recovery_state = BNX2X_RECOVERY_INIT;
5105 schedule_delayed_work(&bp->sp_rtnl_task, 0);
5106 /* Disable HW interrupts */
5107 bnx2x_int_disable(bp);
5108 /* In case of parity errors don't handle attentions so that
5109 * other function would "see" parity errors.
5114 bnx2x_release_alr(bp);
5118 attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4);
5119 attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4);
5120 attn.sig[2] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port*4);
5121 attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4);
5122 if (!CHIP_IS_E1x(bp))
5124 REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port*4);
5128 DP(NETIF_MSG_HW, "attn: %08x %08x %08x %08x %08x\n",
5129 attn.sig[0], attn.sig[1], attn.sig[2], attn.sig[3], attn.sig[4]);
5131 for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
5132 if (deasserted & (1 << index)) {
5133 group_mask = &bp->attn_group[index];
5135 DP(NETIF_MSG_HW, "group[%d]: %08x %08x %08x %08x %08x\n",
5137 group_mask->sig[0], group_mask->sig[1],
5138 group_mask->sig[2], group_mask->sig[3],
5139 group_mask->sig[4]);
5141 bnx2x_attn_int_deasserted4(bp,
5142 attn.sig[4] & group_mask->sig[4]);
5143 bnx2x_attn_int_deasserted3(bp,
5144 attn.sig[3] & group_mask->sig[3]);
5145 bnx2x_attn_int_deasserted1(bp,
5146 attn.sig[1] & group_mask->sig[1]);
5147 bnx2x_attn_int_deasserted2(bp,
5148 attn.sig[2] & group_mask->sig[2]);
5149 bnx2x_attn_int_deasserted0(bp,
5150 attn.sig[0] & group_mask->sig[0]);
5154 bnx2x_release_alr(bp);
5156 if (bp->common.int_block == INT_BLOCK_HC)
5157 reg_addr = (HC_REG_COMMAND_REG + port*32 +
5158 COMMAND_REG_ATTN_BITS_CLR);
5160 reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER*8);
5163 DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", val,
5164 (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr);
5165 REG_WR(bp, reg_addr, val);
5167 if (~bp->attn_state & deasserted)
5168 BNX2X_ERR("IGU ERROR\n");
5170 reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
5171 MISC_REG_AEU_MASK_ATTN_FUNC_0;
5173 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
5174 aeu_mask = REG_RD(bp, reg_addr);
5176 DP(NETIF_MSG_HW, "aeu_mask %x newly deasserted %x\n",
5177 aeu_mask, deasserted);
5178 aeu_mask |= (deasserted & 0x3ff);
5179 DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
5181 REG_WR(bp, reg_addr, aeu_mask);
5182 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
5184 DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
5185 bp->attn_state &= ~deasserted;
5186 DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
5189 static void bnx2x_attn_int(struct bnx2x *bp)
5191 /* read local copy of bits */
5192 u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block.
5194 u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block.
5196 u32 attn_state = bp->attn_state;
5198 /* look for changed bits */
5199 u32 asserted = attn_bits & ~attn_ack & ~attn_state;
5200 u32 deasserted = ~attn_bits & attn_ack & attn_state;
5203 "attn_bits %x attn_ack %x asserted %x deasserted %x\n",
5204 attn_bits, attn_ack, asserted, deasserted);
5206 if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state))
5207 BNX2X_ERR("BAD attention state\n");
5209 /* handle bits that were raised */
5211 bnx2x_attn_int_asserted(bp, asserted);
5214 bnx2x_attn_int_deasserted(bp, deasserted);
5217 void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment,
5218 u16 index, u8 op, u8 update)
5220 u32 igu_addr = bp->igu_base_addr;
5221 igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8;
5222 bnx2x_igu_ack_sb_gen(bp, igu_sb_id, segment, index, op, update,
5226 static void bnx2x_update_eq_prod(struct bnx2x *bp, u16 prod)
5228 /* No memory barriers */
5229 storm_memset_eq_prod(bp, prod, BP_FUNC(bp));
5230 mmiowb(); /* keep prod updates ordered */
5233 static int bnx2x_cnic_handle_cfc_del(struct bnx2x *bp, u32 cid,
5234 union event_ring_elem *elem)
5236 u8 err = elem->message.error;
5238 if (!bp->cnic_eth_dev.starting_cid ||
5239 (cid < bp->cnic_eth_dev.starting_cid &&
5240 cid != bp->cnic_eth_dev.iscsi_l2_cid))
5243 DP(BNX2X_MSG_SP, "got delete ramrod for CNIC CID %d\n", cid);
5245 if (unlikely(err)) {
5247 BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n",
5249 bnx2x_panic_dump(bp, false);
5251 bnx2x_cnic_cfc_comp(bp, cid, err);
5255 static void bnx2x_handle_mcast_eqe(struct bnx2x *bp)
5257 struct bnx2x_mcast_ramrod_params rparam;
5260 memset(&rparam, 0, sizeof(rparam));
5262 rparam.mcast_obj = &bp->mcast_obj;
5264 netif_addr_lock_bh(bp->dev);
5266 /* Clear pending state for the last command */
5267 bp->mcast_obj.raw.clear_pending(&bp->mcast_obj.raw);
5269 /* If there are pending mcast commands - send them */
5270 if (bp->mcast_obj.check_pending(&bp->mcast_obj)) {
5271 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT);
5273 BNX2X_ERR("Failed to send pending mcast commands: %d\n",
5277 netif_addr_unlock_bh(bp->dev);
5280 static void bnx2x_handle_classification_eqe(struct bnx2x *bp,
5281 union event_ring_elem *elem)
5283 unsigned long ramrod_flags = 0;
5285 u32 echo = le32_to_cpu(elem->message.data.eth_event.echo);
5286 u32 cid = echo & BNX2X_SWCID_MASK;
5287 struct bnx2x_vlan_mac_obj *vlan_mac_obj;
5289 /* Always push next commands out, don't wait here */
5290 __set_bit(RAMROD_CONT, &ramrod_flags);
5292 switch (echo >> BNX2X_SWCID_SHIFT) {
5293 case BNX2X_FILTER_MAC_PENDING:
5294 DP(BNX2X_MSG_SP, "Got SETUP_MAC completions\n");
5295 if (CNIC_LOADED(bp) && (cid == BNX2X_ISCSI_ETH_CID(bp)))
5296 vlan_mac_obj = &bp->iscsi_l2_mac_obj;
5298 vlan_mac_obj = &bp->sp_objs[cid].mac_obj;
5301 case BNX2X_FILTER_VLAN_PENDING:
5302 DP(BNX2X_MSG_SP, "Got SETUP_VLAN completions\n");
5303 vlan_mac_obj = &bp->sp_objs[cid].vlan_obj;
5305 case BNX2X_FILTER_MCAST_PENDING:
5306 DP(BNX2X_MSG_SP, "Got SETUP_MCAST completions\n");
5307 /* This is only relevant for 57710 where multicast MACs are
5308 * configured as unicast MACs using the same ramrod.
5310 bnx2x_handle_mcast_eqe(bp);
5313 BNX2X_ERR("Unsupported classification command: 0x%x\n", echo);
5317 rc = vlan_mac_obj->complete(bp, vlan_mac_obj, elem, &ramrod_flags);
5320 BNX2X_ERR("Failed to schedule new commands: %d\n", rc);
5322 DP(BNX2X_MSG_SP, "Scheduled next pending commands...\n");
5325 static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start);
5327 static void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp)
5329 netif_addr_lock_bh(bp->dev);
5331 clear_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state);
5333 /* Send rx_mode command again if was requested */
5334 if (test_and_clear_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state))
5335 bnx2x_set_storm_rx_mode(bp);
5336 else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED,
5338 bnx2x_set_iscsi_eth_rx_mode(bp, true);
5339 else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED,
5341 bnx2x_set_iscsi_eth_rx_mode(bp, false);
5343 netif_addr_unlock_bh(bp->dev);
5346 static void bnx2x_after_afex_vif_lists(struct bnx2x *bp,
5347 union event_ring_elem *elem)
5349 if (elem->message.data.vif_list_event.echo == VIF_LIST_RULE_GET) {
5351 "afex: ramrod completed VIF LIST_GET, addrs 0x%x\n",
5352 elem->message.data.vif_list_event.func_bit_map);
5353 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_LISTGET_ACK,
5354 elem->message.data.vif_list_event.func_bit_map);
5355 } else if (elem->message.data.vif_list_event.echo ==
5356 VIF_LIST_RULE_SET) {
5357 DP(BNX2X_MSG_SP, "afex: ramrod completed VIF LIST_SET\n");
5358 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_LISTSET_ACK, 0);
5362 /* called with rtnl_lock */
5363 static void bnx2x_after_function_update(struct bnx2x *bp)
5366 struct bnx2x_fastpath *fp;
5367 struct bnx2x_queue_state_params queue_params = {NULL};
5368 struct bnx2x_queue_update_params *q_update_params =
5369 &queue_params.params.update;
5371 /* Send Q update command with afex vlan removal values for all Qs */
5372 queue_params.cmd = BNX2X_Q_CMD_UPDATE;
5374 /* set silent vlan removal values according to vlan mode */
5375 __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
5376 &q_update_params->update_flags);
5377 __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
5378 &q_update_params->update_flags);
5379 __set_bit(RAMROD_COMP_WAIT, &queue_params.ramrod_flags);
5381 /* in access mode mark mask and value are 0 to strip all vlans */
5382 if (bp->afex_vlan_mode == FUNC_MF_CFG_AFEX_VLAN_ACCESS_MODE) {
5383 q_update_params->silent_removal_value = 0;
5384 q_update_params->silent_removal_mask = 0;
5386 q_update_params->silent_removal_value =
5387 (bp->afex_def_vlan_tag & VLAN_VID_MASK);
5388 q_update_params->silent_removal_mask = VLAN_VID_MASK;
5391 for_each_eth_queue(bp, q) {
5392 /* Set the appropriate Queue object */
5394 queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
5396 /* send the ramrod */
5397 rc = bnx2x_queue_state_change(bp, &queue_params);
5399 BNX2X_ERR("Failed to config silent vlan rem for Q %d\n",
5403 if (!NO_FCOE(bp) && CNIC_ENABLED(bp)) {
5404 fp = &bp->fp[FCOE_IDX(bp)];
5405 queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
5407 /* clear pending completion bit */
5408 __clear_bit(RAMROD_COMP_WAIT, &queue_params.ramrod_flags);
5410 /* mark latest Q bit */
5411 smp_mb__before_atomic();
5412 set_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state);
5413 smp_mb__after_atomic();
5415 /* send Q update ramrod for FCoE Q */
5416 rc = bnx2x_queue_state_change(bp, &queue_params);
5418 BNX2X_ERR("Failed to config silent vlan rem for Q %d\n",
5421 /* If no FCoE ring - ACK MCP now */
5422 bnx2x_link_report(bp);
5423 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0);
5427 static struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj(
5428 struct bnx2x *bp, u32 cid)
5430 DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid);
5432 if (CNIC_LOADED(bp) && (cid == BNX2X_FCOE_ETH_CID(bp)))
5433 return &bnx2x_fcoe_sp_obj(bp, q_obj);
5435 return &bp->sp_objs[CID_TO_FP(cid, bp)].q_obj;
5438 static void bnx2x_eq_int(struct bnx2x *bp)
5440 u16 hw_cons, sw_cons, sw_prod;
5441 union event_ring_elem *elem;
5445 int rc, spqe_cnt = 0;
5446 struct bnx2x_queue_sp_obj *q_obj;
5447 struct bnx2x_func_sp_obj *f_obj = &bp->func_obj;
5448 struct bnx2x_raw_obj *rss_raw = &bp->rss_conf_obj.raw;
5450 hw_cons = le16_to_cpu(*bp->eq_cons_sb);
5452 /* The hw_cos range is 1-255, 257 - the sw_cons range is 0-254, 256.
5453 * when we get the next-page we need to adjust so the loop
5454 * condition below will be met. The next element is the size of a
5455 * regular element and hence incrementing by 1
5457 if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE)
5460 /* This function may never run in parallel with itself for a
5461 * specific bp, thus there is no need in "paired" read memory
5464 sw_cons = bp->eq_cons;
5465 sw_prod = bp->eq_prod;
5467 DP(BNX2X_MSG_SP, "EQ: hw_cons %u sw_cons %u bp->eq_spq_left %x\n",
5468 hw_cons, sw_cons, atomic_read(&bp->eq_spq_left));
5470 for (; sw_cons != hw_cons;
5471 sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) {
5473 elem = &bp->eq_ring[EQ_DESC(sw_cons)];
5475 rc = bnx2x_iov_eq_sp_event(bp, elem);
5477 DP(BNX2X_MSG_IOV, "bnx2x_iov_eq_sp_event returned %d\n",
5482 opcode = elem->message.opcode;
5484 /* handle eq element */
5486 case EVENT_RING_OPCODE_VF_PF_CHANNEL:
5487 bnx2x_vf_mbx_schedule(bp,
5488 &elem->message.data.vf_pf_event);
5491 case EVENT_RING_OPCODE_STAT_QUERY:
5492 DP_AND((BNX2X_MSG_SP | BNX2X_MSG_STATS),
5493 "got statistics comp event %d\n",
5495 /* nothing to do with stats comp */
5498 case EVENT_RING_OPCODE_CFC_DEL:
5499 /* handle according to cid range */
5501 * we may want to verify here that the bp state is
5505 /* elem CID originates from FW; actually LE */
5506 cid = SW_CID(elem->message.data.cfc_del_event.cid);
5509 "got delete ramrod for MULTI[%d]\n", cid);
5511 if (CNIC_LOADED(bp) &&
5512 !bnx2x_cnic_handle_cfc_del(bp, cid, elem))
5515 q_obj = bnx2x_cid_to_q_obj(bp, cid);
5517 if (q_obj->complete_cmd(bp, q_obj, BNX2X_Q_CMD_CFC_DEL))
5522 case EVENT_RING_OPCODE_STOP_TRAFFIC:
5523 DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got STOP TRAFFIC\n");
5524 bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED);
5525 if (f_obj->complete_cmd(bp, f_obj,
5526 BNX2X_F_CMD_TX_STOP))
5530 case EVENT_RING_OPCODE_START_TRAFFIC:
5531 DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got START TRAFFIC\n");
5532 bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED);
5533 if (f_obj->complete_cmd(bp, f_obj,
5534 BNX2X_F_CMD_TX_START))
5538 case EVENT_RING_OPCODE_FUNCTION_UPDATE:
5539 echo = elem->message.data.function_update_event.echo;
5540 if (echo == SWITCH_UPDATE) {
5541 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP,
5542 "got FUNC_SWITCH_UPDATE ramrod\n");
5543 if (f_obj->complete_cmd(
5544 bp, f_obj, BNX2X_F_CMD_SWITCH_UPDATE))
5548 int cmd = BNX2X_SP_RTNL_AFEX_F_UPDATE;
5550 DP(BNX2X_MSG_SP | BNX2X_MSG_MCP,
5551 "AFEX: ramrod completed FUNCTION_UPDATE\n");
5552 f_obj->complete_cmd(bp, f_obj,
5553 BNX2X_F_CMD_AFEX_UPDATE);
5555 /* We will perform the Queues update from
5556 * sp_rtnl task as all Queue SP operations
5557 * should run under rtnl_lock.
5559 bnx2x_schedule_sp_rtnl(bp, cmd, 0);
5564 case EVENT_RING_OPCODE_AFEX_VIF_LISTS:
5565 f_obj->complete_cmd(bp, f_obj,
5566 BNX2X_F_CMD_AFEX_VIFLISTS);
5567 bnx2x_after_afex_vif_lists(bp, elem);
5569 case EVENT_RING_OPCODE_FUNCTION_START:
5570 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP,
5571 "got FUNC_START ramrod\n");
5572 if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_START))
5577 case EVENT_RING_OPCODE_FUNCTION_STOP:
5578 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP,
5579 "got FUNC_STOP ramrod\n");
5580 if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_STOP))
5585 case EVENT_RING_OPCODE_SET_TIMESYNC:
5586 DP(BNX2X_MSG_SP | BNX2X_MSG_PTP,
5587 "got set_timesync ramrod completion\n");
5588 if (f_obj->complete_cmd(bp, f_obj,
5589 BNX2X_F_CMD_SET_TIMESYNC))
5594 switch (opcode | bp->state) {
5595 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
5597 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
5598 BNX2X_STATE_OPENING_WAIT4_PORT):
5599 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
5600 BNX2X_STATE_CLOSING_WAIT4_HALT):
5601 DP(BNX2X_MSG_SP, "got RSS_UPDATE ramrod. CID %d\n",
5602 SW_CID(elem->message.data.eth_event.echo));
5603 rss_raw->clear_pending(rss_raw);
5606 case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN):
5607 case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG):
5608 case (EVENT_RING_OPCODE_SET_MAC |
5609 BNX2X_STATE_CLOSING_WAIT4_HALT):
5610 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES |
5612 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES |
5614 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES |
5615 BNX2X_STATE_CLOSING_WAIT4_HALT):
5616 DP(BNX2X_MSG_SP, "got (un)set vlan/mac ramrod\n");
5617 bnx2x_handle_classification_eqe(bp, elem);
5620 case (EVENT_RING_OPCODE_MULTICAST_RULES |
5622 case (EVENT_RING_OPCODE_MULTICAST_RULES |
5624 case (EVENT_RING_OPCODE_MULTICAST_RULES |
5625 BNX2X_STATE_CLOSING_WAIT4_HALT):
5626 DP(BNX2X_MSG_SP, "got mcast ramrod\n");
5627 bnx2x_handle_mcast_eqe(bp);
5630 case (EVENT_RING_OPCODE_FILTERS_RULES |
5632 case (EVENT_RING_OPCODE_FILTERS_RULES |
5634 case (EVENT_RING_OPCODE_FILTERS_RULES |
5635 BNX2X_STATE_CLOSING_WAIT4_HALT):
5636 DP(BNX2X_MSG_SP, "got rx_mode ramrod\n");
5637 bnx2x_handle_rx_mode_eqe(bp);
5640 /* unknown event log error and continue */
5641 BNX2X_ERR("Unknown EQ event %d, bp->state 0x%x\n",
5642 elem->message.opcode, bp->state);
5648 smp_mb__before_atomic();
5649 atomic_add(spqe_cnt, &bp->eq_spq_left);
5651 bp->eq_cons = sw_cons;
5652 bp->eq_prod = sw_prod;
5653 /* Make sure that above mem writes were issued towards the memory */
5656 /* update producer */
5657 bnx2x_update_eq_prod(bp, bp->eq_prod);
5660 static void bnx2x_sp_task(struct work_struct *work)
5662 struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work);
5664 DP(BNX2X_MSG_SP, "sp task invoked\n");
5666 /* make sure the atomic interrupt_occurred has been written */
5668 if (atomic_read(&bp->interrupt_occurred)) {
5670 /* what work needs to be performed? */
5671 u16 status = bnx2x_update_dsb_idx(bp);
5673 DP(BNX2X_MSG_SP, "status %x\n", status);
5674 DP(BNX2X_MSG_SP, "setting interrupt_occurred to 0\n");
5675 atomic_set(&bp->interrupt_occurred, 0);
5678 if (status & BNX2X_DEF_SB_ATT_IDX) {
5680 status &= ~BNX2X_DEF_SB_ATT_IDX;
5683 /* SP events: STAT_QUERY and others */
5684 if (status & BNX2X_DEF_SB_IDX) {
5685 struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp);
5687 if (FCOE_INIT(bp) &&
5688 (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
5689 /* Prevent local bottom-halves from running as
5690 * we are going to change the local NAPI list.
5693 napi_schedule(&bnx2x_fcoe(bp, napi));
5697 /* Handle EQ completions */
5699 bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID,
5700 le16_to_cpu(bp->def_idx), IGU_INT_NOP, 1);
5702 status &= ~BNX2X_DEF_SB_IDX;
5705 /* if status is non zero then perhaps something went wrong */
5706 if (unlikely(status))
5708 "got an unknown interrupt! (status 0x%x)\n", status);
5710 /* ack status block only if something was actually handled */
5711 bnx2x_ack_sb(bp, bp->igu_dsb_id, ATTENTION_ID,
5712 le16_to_cpu(bp->def_att_idx), IGU_INT_ENABLE, 1);
5715 /* afex - poll to check if VIFSET_ACK should be sent to MFW */
5716 if (test_and_clear_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK,
5718 bnx2x_link_report(bp);
5719 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0);
5723 irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
5725 struct net_device *dev = dev_instance;
5726 struct bnx2x *bp = netdev_priv(dev);
5728 bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0,
5729 IGU_INT_DISABLE, 0);
5731 #ifdef BNX2X_STOP_ON_ERROR
5732 if (unlikely(bp->panic))
5736 if (CNIC_LOADED(bp)) {
5737 struct cnic_ops *c_ops;
5740 c_ops = rcu_dereference(bp->cnic_ops);
5742 c_ops->cnic_handler(bp->cnic_data, NULL);
5746 /* schedule sp task to perform default status block work, ack
5747 * attentions and enable interrupts.
5749 bnx2x_schedule_sp_task(bp);
5754 /* end of slow path */
5756 void bnx2x_drv_pulse(struct bnx2x *bp)
5758 SHMEM_WR(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb,
5759 bp->fw_drv_pulse_wr_seq);
5762 static void bnx2x_timer(unsigned long data)
5764 struct bnx2x *bp = (struct bnx2x *) data;
5766 if (!netif_running(bp->dev))
5771 int mb_idx = BP_FW_MB_IDX(bp);
5775 ++bp->fw_drv_pulse_wr_seq;
5776 bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
5777 drv_pulse = bp->fw_drv_pulse_wr_seq;
5778 bnx2x_drv_pulse(bp);
5780 mcp_pulse = (SHMEM_RD(bp, func_mb[mb_idx].mcp_pulse_mb) &
5781 MCP_PULSE_SEQ_MASK);
5782 /* The delta between driver pulse and mcp response
5783 * should not get too big. If the MFW is more than 5 pulses
5784 * behind, we should worry about it enough to generate an error
5787 if (((drv_pulse - mcp_pulse) & MCP_PULSE_SEQ_MASK) > 5)
5788 BNX2X_ERR("MFW seems hanged: drv_pulse (0x%x) != mcp_pulse (0x%x)\n",
5789 drv_pulse, mcp_pulse);
5792 if (bp->state == BNX2X_STATE_OPEN)
5793 bnx2x_stats_handle(bp, STATS_EVENT_UPDATE);
5795 /* sample pf vf bulletin board for new posts from pf */
5797 bnx2x_timer_sriov(bp);
5799 mod_timer(&bp->timer, jiffies + bp->current_interval);
5802 /* end of Statistics */
5807 * nic init service functions
5810 static void bnx2x_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
5813 if (!(len%4) && !(addr%4))
5814 for (i = 0; i < len; i += 4)
5815 REG_WR(bp, addr + i, fill);
5817 for (i = 0; i < len; i++)
5818 REG_WR8(bp, addr + i, fill);
5821 /* helper: writes FP SP data to FW - data_size in dwords */
5822 static void bnx2x_wr_fp_sb_data(struct bnx2x *bp,
5828 for (index = 0; index < data_size; index++)
5829 REG_WR(bp, BAR_CSTRORM_INTMEM +
5830 CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) +
5832 *(sb_data_p + index));
5835 static void bnx2x_zero_fp_sb(struct bnx2x *bp, int fw_sb_id)
5839 struct hc_status_block_data_e2 sb_data_e2;
5840 struct hc_status_block_data_e1x sb_data_e1x;
5842 /* disable the function first */
5843 if (!CHIP_IS_E1x(bp)) {
5844 memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
5845 sb_data_e2.common.state = SB_DISABLED;
5846 sb_data_e2.common.p_func.vf_valid = false;
5847 sb_data_p = (u32 *)&sb_data_e2;
5848 data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
5850 memset(&sb_data_e1x, 0,
5851 sizeof(struct hc_status_block_data_e1x));
5852 sb_data_e1x.common.state = SB_DISABLED;
5853 sb_data_e1x.common.p_func.vf_valid = false;
5854 sb_data_p = (u32 *)&sb_data_e1x;
5855 data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
5857 bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size);
5859 bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
5860 CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id), 0,
5861 CSTORM_STATUS_BLOCK_SIZE);
5862 bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
5863 CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id), 0,
5864 CSTORM_SYNC_BLOCK_SIZE);
5867 /* helper: writes SP SB data to FW */
5868 static void bnx2x_wr_sp_sb_data(struct bnx2x *bp,
5869 struct hc_sp_status_block_data *sp_sb_data)
5871 int func = BP_FUNC(bp);
5873 for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++)
5874 REG_WR(bp, BAR_CSTRORM_INTMEM +
5875 CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) +
5877 *((u32 *)sp_sb_data + i));
5880 static void bnx2x_zero_sp_sb(struct bnx2x *bp)
5882 int func = BP_FUNC(bp);
5883 struct hc_sp_status_block_data sp_sb_data;
5884 memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
5886 sp_sb_data.state = SB_DISABLED;
5887 sp_sb_data.p_func.vf_valid = false;
5889 bnx2x_wr_sp_sb_data(bp, &sp_sb_data);
5891 bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
5892 CSTORM_SP_STATUS_BLOCK_OFFSET(func), 0,
5893 CSTORM_SP_STATUS_BLOCK_SIZE);
5894 bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
5895 CSTORM_SP_SYNC_BLOCK_OFFSET(func), 0,
5896 CSTORM_SP_SYNC_BLOCK_SIZE);
5899 static void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm,
5900 int igu_sb_id, int igu_seg_id)
5902 hc_sm->igu_sb_id = igu_sb_id;
5903 hc_sm->igu_seg_id = igu_seg_id;
5904 hc_sm->timer_value = 0xFF;
5905 hc_sm->time_to_expire = 0xFFFFFFFF;
5908 /* allocates state machine ids. */
5909 static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data)
5911 /* zero out state machine indices */
5913 index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
5916 index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
5917 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
5918 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
5919 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;
5923 index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
5924 SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5927 index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
5928 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5929 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
5930 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5931 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
5932 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5933 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
5934 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5937 void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
5938 u8 vf_valid, int fw_sb_id, int igu_sb_id)
5942 struct hc_status_block_data_e2 sb_data_e2;
5943 struct hc_status_block_data_e1x sb_data_e1x;
5944 struct hc_status_block_sm *hc_sm_p;
5948 if (CHIP_INT_MODE_IS_BC(bp))
5949 igu_seg_id = HC_SEG_ACCESS_NORM;
5951 igu_seg_id = IGU_SEG_ACCESS_NORM;
5953 bnx2x_zero_fp_sb(bp, fw_sb_id);
5955 if (!CHIP_IS_E1x(bp)) {
5956 memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
5957 sb_data_e2.common.state = SB_ENABLED;
5958 sb_data_e2.common.p_func.pf_id = BP_FUNC(bp);
5959 sb_data_e2.common.p_func.vf_id = vfid;
5960 sb_data_e2.common.p_func.vf_valid = vf_valid;
5961 sb_data_e2.common.p_func.vnic_id = BP_VN(bp);
5962 sb_data_e2.common.same_igu_sb_1b = true;
5963 sb_data_e2.common.host_sb_addr.hi = U64_HI(mapping);
5964 sb_data_e2.common.host_sb_addr.lo = U64_LO(mapping);
5965 hc_sm_p = sb_data_e2.common.state_machine;
5966 sb_data_p = (u32 *)&sb_data_e2;
5967 data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
5968 bnx2x_map_sb_state_machines(sb_data_e2.index_data);
5970 memset(&sb_data_e1x, 0,
5971 sizeof(struct hc_status_block_data_e1x));
5972 sb_data_e1x.common.state = SB_ENABLED;
5973 sb_data_e1x.common.p_func.pf_id = BP_FUNC(bp);
5974 sb_data_e1x.common.p_func.vf_id = 0xff;
5975 sb_data_e1x.common.p_func.vf_valid = false;
5976 sb_data_e1x.common.p_func.vnic_id = BP_VN(bp);
5977 sb_data_e1x.common.same_igu_sb_1b = true;
5978 sb_data_e1x.common.host_sb_addr.hi = U64_HI(mapping);
5979 sb_data_e1x.common.host_sb_addr.lo = U64_LO(mapping);
5980 hc_sm_p = sb_data_e1x.common.state_machine;
5981 sb_data_p = (u32 *)&sb_data_e1x;
5982 data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
5983 bnx2x_map_sb_state_machines(sb_data_e1x.index_data);
5986 bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID],
5987 igu_sb_id, igu_seg_id);
5988 bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID],
5989 igu_sb_id, igu_seg_id);
5991 DP(NETIF_MSG_IFUP, "Init FW SB %d\n", fw_sb_id);
5993 /* write indices to HW - PCI guarantees endianity of regpairs */
5994 bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size);
5997 static void bnx2x_update_coalesce_sb(struct bnx2x *bp, u8 fw_sb_id,
5998 u16 tx_usec, u16 rx_usec)
6000 bnx2x_update_coalesce_sb_index(bp, fw_sb_id, HC_INDEX_ETH_RX_CQ_CONS,
6002 bnx2x_update_coalesce_sb_index(bp, fw_sb_id,
6003 HC_INDEX_ETH_TX_CQ_CONS_COS0, false,
6005 bnx2x_update_coalesce_sb_index(bp, fw_sb_id,
6006 HC_INDEX_ETH_TX_CQ_CONS_COS1, false,
6008 bnx2x_update_coalesce_sb_index(bp, fw_sb_id,
6009 HC_INDEX_ETH_TX_CQ_CONS_COS2, false,
6013 static void bnx2x_init_def_sb(struct bnx2x *bp)
6015 struct host_sp_status_block *def_sb = bp->def_status_blk;
6016 dma_addr_t mapping = bp->def_status_blk_mapping;
6017 int igu_sp_sb_index;
6019 int port = BP_PORT(bp);
6020 int func = BP_FUNC(bp);
6021 int reg_offset, reg_offset_en5;
6024 struct hc_sp_status_block_data sp_sb_data;
6025 memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
6027 if (CHIP_INT_MODE_IS_BC(bp)) {
6028 igu_sp_sb_index = DEF_SB_IGU_ID;
6029 igu_seg_id = HC_SEG_ACCESS_DEF;
6031 igu_sp_sb_index = bp->igu_dsb_id;
6032 igu_seg_id = IGU_SEG_ACCESS_DEF;
6036 section = ((u64)mapping) + offsetof(struct host_sp_status_block,
6037 atten_status_block);
6038 def_sb->atten_status_block.status_block_id = igu_sp_sb_index;
6042 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
6043 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
6044 reg_offset_en5 = (port ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
6045 MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0);
6046 for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
6048 /* take care of sig[0]..sig[4] */
6049 for (sindex = 0; sindex < 4; sindex++)
6050 bp->attn_group[index].sig[sindex] =
6051 REG_RD(bp, reg_offset + sindex*0x4 + 0x10*index);
6053 if (!CHIP_IS_E1x(bp))
6055 * enable5 is separate from the rest of the registers,
6056 * and therefore the address skip is 4
6057 * and not 16 between the different groups
6059 bp->attn_group[index].sig[4] = REG_RD(bp,
6060 reg_offset_en5 + 0x4*index);
6062 bp->attn_group[index].sig[4] = 0;
6065 if (bp->common.int_block == INT_BLOCK_HC) {
6066 reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L :
6067 HC_REG_ATTN_MSG0_ADDR_L);
6069 REG_WR(bp, reg_offset, U64_LO(section));
6070 REG_WR(bp, reg_offset + 4, U64_HI(section));
6071 } else if (!CHIP_IS_E1x(bp)) {
6072 REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section));
6073 REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section));
6076 section = ((u64)mapping) + offsetof(struct host_sp_status_block,
6079 bnx2x_zero_sp_sb(bp);
6081 /* PCI guarantees endianity of regpairs */
6082 sp_sb_data.state = SB_ENABLED;
6083 sp_sb_data.host_sb_addr.lo = U64_LO(section);
6084 sp_sb_data.host_sb_addr.hi = U64_HI(section);
6085 sp_sb_data.igu_sb_id = igu_sp_sb_index;
6086 sp_sb_data.igu_seg_id = igu_seg_id;
6087 sp_sb_data.p_func.pf_id = func;
6088 sp_sb_data.p_func.vnic_id = BP_VN(bp);
6089 sp_sb_data.p_func.vf_id = 0xff;
6091 bnx2x_wr_sp_sb_data(bp, &sp_sb_data);
6093 bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
6096 void bnx2x_update_coalesce(struct bnx2x *bp)
6100 for_each_eth_queue(bp, i)
6101 bnx2x_update_coalesce_sb(bp, bp->fp[i].fw_sb_id,
6102 bp->tx_ticks, bp->rx_ticks);
6105 static void bnx2x_init_sp_ring(struct bnx2x *bp)
6107 spin_lock_init(&bp->spq_lock);
6108 atomic_set(&bp->cq_spq_left, MAX_SPQ_PENDING);
6110 bp->spq_prod_idx = 0;
6111 bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX;
6112 bp->spq_prod_bd = bp->spq;
6113 bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT;
6116 static void bnx2x_init_eq_ring(struct bnx2x *bp)
6119 for (i = 1; i <= NUM_EQ_PAGES; i++) {
6120 union event_ring_elem *elem =
6121 &bp->eq_ring[EQ_DESC_CNT_PAGE * i - 1];
6123 elem->next_page.addr.hi =
6124 cpu_to_le32(U64_HI(bp->eq_mapping +
6125 BCM_PAGE_SIZE * (i % NUM_EQ_PAGES)));
6126 elem->next_page.addr.lo =
6127 cpu_to_le32(U64_LO(bp->eq_mapping +
6128 BCM_PAGE_SIZE*(i % NUM_EQ_PAGES)));
6131 bp->eq_prod = NUM_EQ_DESC;
6132 bp->eq_cons_sb = BNX2X_EQ_INDEX;
6133 /* we want a warning message before it gets wrought... */
6134 atomic_set(&bp->eq_spq_left,
6135 min_t(int, MAX_SP_DESC_CNT - MAX_SPQ_PENDING, NUM_EQ_DESC) - 1);
6138 /* called with netif_addr_lock_bh() */
6139 static int bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id,
6140 unsigned long rx_mode_flags,
6141 unsigned long rx_accept_flags,
6142 unsigned long tx_accept_flags,
6143 unsigned long ramrod_flags)
6145 struct bnx2x_rx_mode_ramrod_params ramrod_param;
6148 memset(&ramrod_param, 0, sizeof(ramrod_param));
6150 /* Prepare ramrod parameters */
6151 ramrod_param.cid = 0;
6152 ramrod_param.cl_id = cl_id;
6153 ramrod_param.rx_mode_obj = &bp->rx_mode_obj;
6154 ramrod_param.func_id = BP_FUNC(bp);
6156 ramrod_param.pstate = &bp->sp_state;
6157 ramrod_param.state = BNX2X_FILTER_RX_MODE_PENDING;
6159 ramrod_param.rdata = bnx2x_sp(bp, rx_mode_rdata);
6160 ramrod_param.rdata_mapping = bnx2x_sp_mapping(bp, rx_mode_rdata);
6162 set_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state);
6164 ramrod_param.ramrod_flags = ramrod_flags;
6165 ramrod_param.rx_mode_flags = rx_mode_flags;
6167 ramrod_param.rx_accept_flags = rx_accept_flags;
6168 ramrod_param.tx_accept_flags = tx_accept_flags;
6170 rc = bnx2x_config_rx_mode(bp, &ramrod_param);
6172 BNX2X_ERR("Set rx_mode %d failed\n", bp->rx_mode);
6179 static int bnx2x_fill_accept_flags(struct bnx2x *bp, u32 rx_mode,
6180 unsigned long *rx_accept_flags,
6181 unsigned long *tx_accept_flags)
6183 /* Clear the flags first */
6184 *rx_accept_flags = 0;
6185 *tx_accept_flags = 0;
6188 case BNX2X_RX_MODE_NONE:
6190 * 'drop all' supersedes any accept flags that may have been
6191 * passed to the function.
6194 case BNX2X_RX_MODE_NORMAL:
6195 __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags);
6196 __set_bit(BNX2X_ACCEPT_MULTICAST, rx_accept_flags);
6197 __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags);
6199 /* internal switching mode */
6200 __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags);
6201 __set_bit(BNX2X_ACCEPT_MULTICAST, tx_accept_flags);
6202 __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags);
6204 if (bp->accept_any_vlan) {
6205 __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags);
6206 __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags);
6210 case BNX2X_RX_MODE_ALLMULTI:
6211 __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags);
6212 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags);
6213 __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags);
6215 /* internal switching mode */
6216 __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags);
6217 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags);
6218 __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags);
6220 if (bp->accept_any_vlan) {
6221 __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags);
6222 __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags);
6226 case BNX2X_RX_MODE_PROMISC:
6227 /* According to definition of SI mode, iface in promisc mode
6228 * should receive matched and unmatched (in resolution of port)
6231 __set_bit(BNX2X_ACCEPT_UNMATCHED, rx_accept_flags);
6232 __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags);
6233 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags);
6234 __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags);
6236 /* internal switching mode */
6237 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags);
6238 __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags);
6241 __set_bit(BNX2X_ACCEPT_ALL_UNICAST, tx_accept_flags);
6243 __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags);
6245 __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags);
6246 __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags);
6250 BNX2X_ERR("Unknown rx_mode: %d\n", rx_mode);
6257 /* called with netif_addr_lock_bh() */
6258 static int bnx2x_set_storm_rx_mode(struct bnx2x *bp)
6260 unsigned long rx_mode_flags = 0, ramrod_flags = 0;
6261 unsigned long rx_accept_flags = 0, tx_accept_flags = 0;
6265 /* Configure rx_mode of FCoE Queue */
6266 __set_bit(BNX2X_RX_MODE_FCOE_ETH, &rx_mode_flags);
6268 rc = bnx2x_fill_accept_flags(bp, bp->rx_mode, &rx_accept_flags,
6273 __set_bit(RAMROD_RX, &ramrod_flags);
6274 __set_bit(RAMROD_TX, &ramrod_flags);
6276 return bnx2x_set_q_rx_mode(bp, bp->fp->cl_id, rx_mode_flags,
6277 rx_accept_flags, tx_accept_flags,
6281 static void bnx2x_init_internal_common(struct bnx2x *bp)
6285 /* Zero this manually as its initialization is
6286 currently missing in the initTool */
6287 for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
6288 REG_WR(bp, BAR_USTRORM_INTMEM +
6289 USTORM_AGG_DATA_OFFSET + i * 4, 0);
6290 if (!CHIP_IS_E1x(bp)) {
6291 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET,
6292 CHIP_INT_MODE_IS_BC(bp) ?
6293 HC_IGU_BC_MODE : HC_IGU_NBC_MODE);
6297 static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code)
6299 switch (load_code) {
6300 case FW_MSG_CODE_DRV_LOAD_COMMON:
6301 case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
6302 bnx2x_init_internal_common(bp);
6305 case FW_MSG_CODE_DRV_LOAD_PORT:
6309 case FW_MSG_CODE_DRV_LOAD_FUNCTION:
6310 /* internal memory per function is
6311 initialized inside bnx2x_pf_init */
6315 BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code);
6320 static inline u8 bnx2x_fp_igu_sb_id(struct bnx2x_fastpath *fp)
6322 return fp->bp->igu_base_sb + fp->index + CNIC_SUPPORT(fp->bp);
6325 static inline u8 bnx2x_fp_fw_sb_id(struct bnx2x_fastpath *fp)
6327 return fp->bp->base_fw_ndsb + fp->index + CNIC_SUPPORT(fp->bp);
6330 static u8 bnx2x_fp_cl_id(struct bnx2x_fastpath *fp)
6332 if (CHIP_IS_E1x(fp->bp))
6333 return BP_L_ID(fp->bp) + fp->index;
6334 else /* We want Client ID to be the same as IGU SB ID for 57712 */
6335 return bnx2x_fp_igu_sb_id(fp);
6338 static void bnx2x_init_eth_fp(struct bnx2x *bp, int fp_idx)
6340 struct bnx2x_fastpath *fp = &bp->fp[fp_idx];
6342 unsigned long q_type = 0;
6343 u32 cids[BNX2X_MULTI_TX_COS] = { 0 };
6344 fp->rx_queue = fp_idx;
6346 fp->cl_id = bnx2x_fp_cl_id(fp);
6347 fp->fw_sb_id = bnx2x_fp_fw_sb_id(fp);
6348 fp->igu_sb_id = bnx2x_fp_igu_sb_id(fp);
6349 /* qZone id equals to FW (per path) client id */
6350 fp->cl_qzone_id = bnx2x_fp_qzone_id(fp);
6353 fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(fp);
6355 /* Setup SB indices */
6356 fp->rx_cons_sb = BNX2X_RX_SB_INDEX;
6358 /* Configure Queue State object */
6359 __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type);
6360 __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type);
6362 BUG_ON(fp->max_cos > BNX2X_MULTI_TX_COS);
6365 for_each_cos_in_tx_queue(fp, cos) {
6366 bnx2x_init_txdata(bp, fp->txdata_ptr[cos],
6367 CID_COS_TO_TX_ONLY_CID(fp->cid, cos, bp),
6368 FP_COS_TO_TXQ(fp, cos, bp),
6369 BNX2X_TX_SB_INDEX_BASE + cos, fp);
6370 cids[cos] = fp->txdata_ptr[cos]->cid;
6373 /* nothing more for vf to do here */
6377 bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false,
6378 fp->fw_sb_id, fp->igu_sb_id);
6379 bnx2x_update_fpsb_idx(fp);
6380 bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id, cids,
6381 fp->max_cos, BP_FUNC(bp), bnx2x_sp(bp, q_rdata),
6382 bnx2x_sp_mapping(bp, q_rdata), q_type);
6385 * Configure classification DBs: Always enable Tx switching
6387 bnx2x_init_vlan_mac_fp_objs(fp, BNX2X_OBJ_TYPE_RX_TX);
6390 "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n",
6391 fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id,
6395 static void bnx2x_init_tx_ring_one(struct bnx2x_fp_txdata *txdata)
6399 for (i = 1; i <= NUM_TX_RINGS; i++) {
6400 struct eth_tx_next_bd *tx_next_bd =
6401 &txdata->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd;
6403 tx_next_bd->addr_hi =
6404 cpu_to_le32(U64_HI(txdata->tx_desc_mapping +
6405 BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
6406 tx_next_bd->addr_lo =
6407 cpu_to_le32(U64_LO(txdata->tx_desc_mapping +
6408 BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
6411 *txdata->tx_cons_sb = cpu_to_le16(0);
6413 SET_FLAG(txdata->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1);
6414 txdata->tx_db.data.zero_fill1 = 0;
6415 txdata->tx_db.data.prod = 0;
6417 txdata->tx_pkt_prod = 0;
6418 txdata->tx_pkt_cons = 0;
6419 txdata->tx_bd_prod = 0;
6420 txdata->tx_bd_cons = 0;
6424 static void bnx2x_init_tx_rings_cnic(struct bnx2x *bp)
6428 for_each_tx_queue_cnic(bp, i)
6429 bnx2x_init_tx_ring_one(bp->fp[i].txdata_ptr[0]);
6432 static void bnx2x_init_tx_rings(struct bnx2x *bp)
6437 for_each_eth_queue(bp, i)
6438 for_each_cos_in_tx_queue(&bp->fp[i], cos)
6439 bnx2x_init_tx_ring_one(bp->fp[i].txdata_ptr[cos]);
6442 static void bnx2x_init_fcoe_fp(struct bnx2x *bp)
6444 struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp);
6445 unsigned long q_type = 0;
6447 bnx2x_fcoe(bp, rx_queue) = BNX2X_NUM_ETH_QUEUES(bp);
6448 bnx2x_fcoe(bp, cl_id) = bnx2x_cnic_eth_cl_id(bp,
6449 BNX2X_FCOE_ETH_CL_ID_IDX);
6450 bnx2x_fcoe(bp, cid) = BNX2X_FCOE_ETH_CID(bp);
6451 bnx2x_fcoe(bp, fw_sb_id) = DEF_SB_ID;
6452 bnx2x_fcoe(bp, igu_sb_id) = bp->igu_dsb_id;
6453 bnx2x_fcoe(bp, rx_cons_sb) = BNX2X_FCOE_L2_RX_INDEX;
6454 bnx2x_init_txdata(bp, bnx2x_fcoe(bp, txdata_ptr[0]),
6455 fp->cid, FCOE_TXQ_IDX(bp), BNX2X_FCOE_L2_TX_INDEX,
6458 DP(NETIF_MSG_IFUP, "created fcoe tx data (fp index %d)\n", fp->index);
6460 /* qZone id equals to FW (per path) client id */
6461 bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fp_qzone_id(fp);
6463 bnx2x_fcoe(bp, ustorm_rx_prods_offset) =
6464 bnx2x_rx_ustorm_prods_offset(fp);
6466 /* Configure Queue State object */
6467 __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type);
6468 __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type);
6470 /* No multi-CoS for FCoE L2 client */
6471 BUG_ON(fp->max_cos != 1);
6473 bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id,
6474 &fp->cid, 1, BP_FUNC(bp), bnx2x_sp(bp, q_rdata),
6475 bnx2x_sp_mapping(bp, q_rdata), q_type);
6478 "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n",
6479 fp->index, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id,
6483 void bnx2x_nic_init_cnic(struct bnx2x *bp)
6486 bnx2x_init_fcoe_fp(bp);
6488 bnx2x_init_sb(bp, bp->cnic_sb_mapping,
6489 BNX2X_VF_ID_INVALID, false,
6490 bnx2x_cnic_fw_sb_id(bp), bnx2x_cnic_igu_sb_id(bp));
6492 /* ensure status block indices were read */
6494 bnx2x_init_rx_rings_cnic(bp);
6495 bnx2x_init_tx_rings_cnic(bp);
6502 void bnx2x_pre_irq_nic_init(struct bnx2x *bp)
6506 /* Setup NIC internals and enable interrupts */
6507 for_each_eth_queue(bp, i)
6508 bnx2x_init_eth_fp(bp, i);
6510 /* ensure status block indices were read */
6512 bnx2x_init_rx_rings(bp);
6513 bnx2x_init_tx_rings(bp);
6516 /* Initialize MOD_ABS interrupts */
6517 bnx2x_init_mod_abs_int(bp, &bp->link_vars, bp->common.chip_id,
6518 bp->common.shmem_base,
6519 bp->common.shmem2_base, BP_PORT(bp));
6521 /* initialize the default status block and sp ring */
6522 bnx2x_init_def_sb(bp);
6523 bnx2x_update_dsb_idx(bp);
6524 bnx2x_init_sp_ring(bp);
6526 bnx2x_memset_stats(bp);
6530 void bnx2x_post_irq_nic_init(struct bnx2x *bp, u32 load_code)
6532 bnx2x_init_eq_ring(bp);
6533 bnx2x_init_internal(bp, load_code);
6535 bnx2x_stats_init(bp);
6537 /* flush all before enabling interrupts */
6541 bnx2x_int_enable(bp);
6543 /* Check for SPIO5 */
6544 bnx2x_attn_int_deasserted0(bp,
6545 REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + BP_PORT(bp)*4) &
6546 AEU_INPUTS_ATTN_BITS_SPIO5);
6549 /* gzip service functions */
6550 static int bnx2x_gunzip_init(struct bnx2x *bp)
6552 bp->gunzip_buf = dma_alloc_coherent(&bp->pdev->dev, FW_BUF_SIZE,
6553 &bp->gunzip_mapping, GFP_KERNEL);
6554 if (bp->gunzip_buf == NULL)
6557 bp->strm = kmalloc(sizeof(*bp->strm), GFP_KERNEL);
6558 if (bp->strm == NULL)
6561 bp->strm->workspace = vmalloc(zlib_inflate_workspacesize());
6562 if (bp->strm->workspace == NULL)
6572 dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf,
6573 bp->gunzip_mapping);
6574 bp->gunzip_buf = NULL;
6577 BNX2X_ERR("Cannot allocate firmware buffer for un-compression\n");
6581 static void bnx2x_gunzip_end(struct bnx2x *bp)
6584 vfree(bp->strm->workspace);
6589 if (bp->gunzip_buf) {
6590 dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf,
6591 bp->gunzip_mapping);
6592 bp->gunzip_buf = NULL;
6596 static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)
6600 /* check gzip header */
6601 if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) {
6602 BNX2X_ERR("Bad gzip header\n");
6610 if (zbuf[3] & FNAME)
6611 while ((zbuf[n++] != 0) && (n < len));
6613 bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n;
6614 bp->strm->avail_in = len - n;
6615 bp->strm->next_out = bp->gunzip_buf;
6616 bp->strm->avail_out = FW_BUF_SIZE;
6618 rc = zlib_inflateInit2(bp->strm, -MAX_WBITS);
6622 rc = zlib_inflate(bp->strm, Z_FINISH);
6623 if ((rc != Z_OK) && (rc != Z_STREAM_END))
6624 netdev_err(bp->dev, "Firmware decompression error: %s\n",
6627 bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out);
6628 if (bp->gunzip_outlen & 0x3)
6630 "Firmware decompression error: gunzip_outlen (%d) not aligned\n",
6632 bp->gunzip_outlen >>= 2;
6634 zlib_inflateEnd(bp->strm);
6636 if (rc == Z_STREAM_END)
6642 /* nic load/unload */
6645 * General service functions
6648 /* send a NIG loopback debug packet */
6649 static void bnx2x_lb_pckt(struct bnx2x *bp)
6653 /* Ethernet source and destination addresses */
6654 wb_write[0] = 0x55555555;
6655 wb_write[1] = 0x55555555;
6656 wb_write[2] = 0x20; /* SOP */
6657 REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
6659 /* NON-IP protocol */
6660 wb_write[0] = 0x09000000;
6661 wb_write[1] = 0x55555555;
6662 wb_write[2] = 0x10; /* EOP, eop_bvalid = 0 */
6663 REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
6666 /* some of the internal memories
6667 * are not directly readable from the driver
6668 * to test them we send debug packets
6670 static int bnx2x_int_mem_test(struct bnx2x *bp)
6676 if (CHIP_REV_IS_FPGA(bp))
6678 else if (CHIP_REV_IS_EMUL(bp))
6683 /* Disable inputs of parser neighbor blocks */
6684 REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
6685 REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
6686 REG_WR(bp, CFC_REG_DEBUG0, 0x1);
6687 REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
6689 /* Write 0 to parser credits for CFC search request */
6690 REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
6692 /* send Ethernet packet */
6695 /* TODO do i reset NIG statistic? */
6696 /* Wait until NIG register shows 1 packet of size 0x10 */
6697 count = 1000 * factor;
6700 bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
6701 val = *bnx2x_sp(bp, wb_data[0]);
6705 usleep_range(10000, 20000);
6709 BNX2X_ERR("NIG timeout val = 0x%x\n", val);
6713 /* Wait until PRS register shows 1 packet */
6714 count = 1000 * factor;
6716 val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
6720 usleep_range(10000, 20000);
6724 BNX2X_ERR("PRS timeout val = 0x%x\n", val);
6728 /* Reset and init BRB, PRS */
6729 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
6731 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
6733 bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON);
6734 bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON);
6736 DP(NETIF_MSG_HW, "part2\n");
6738 /* Disable inputs of parser neighbor blocks */
6739 REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
6740 REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
6741 REG_WR(bp, CFC_REG_DEBUG0, 0x1);
6742 REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
6744 /* Write 0 to parser credits for CFC search request */
6745 REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
6747 /* send 10 Ethernet packets */
6748 for (i = 0; i < 10; i++)
6751 /* Wait until NIG register shows 10 + 1
6752 packets of size 11*0x10 = 0xb0 */
6753 count = 1000 * factor;
6756 bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
6757 val = *bnx2x_sp(bp, wb_data[0]);
6761 usleep_range(10000, 20000);
6765 BNX2X_ERR("NIG timeout val = 0x%x\n", val);
6769 /* Wait until PRS register shows 2 packets */
6770 val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
6772 BNX2X_ERR("PRS timeout val = 0x%x\n", val);
6774 /* Write 1 to parser credits for CFC search request */
6775 REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x1);
6777 /* Wait until PRS register shows 3 packets */
6778 msleep(10 * factor);
6779 /* Wait until NIG register shows 1 packet of size 0x10 */
6780 val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
6782 BNX2X_ERR("PRS timeout val = 0x%x\n", val);
6784 /* clear NIG EOP FIFO */
6785 for (i = 0; i < 11; i++)
6786 REG_RD(bp, NIG_REG_INGRESS_EOP_LB_FIFO);
6787 val = REG_RD(bp, NIG_REG_INGRESS_EOP_LB_EMPTY);
6789 BNX2X_ERR("clear of NIG failed\n");
6793 /* Reset and init BRB, PRS, NIG */
6794 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
6796 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
6798 bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON);
6799 bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON);
6800 if (!CNIC_SUPPORT(bp))
6802 REG_WR(bp, PRS_REG_NIC_MODE, 1);
6804 /* Enable inputs of parser neighbor blocks */
6805 REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff);
6806 REG_WR(bp, TCM_REG_PRS_IFEN, 0x1);
6807 REG_WR(bp, CFC_REG_DEBUG0, 0x0);
6808 REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1);
6810 DP(NETIF_MSG_HW, "done\n");
6815 static void bnx2x_enable_blocks_attention(struct bnx2x *bp)
6819 REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
6820 if (!CHIP_IS_E1x(bp))
6821 REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0x40);
6823 REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0);
6824 REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
6825 REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
6827 * mask read length error interrupts in brb for parser
6828 * (parsing unit and 'checksum and crc' unit)
6829 * these errors are legal (PU reads fixed length and CAC can cause
6830 * read length error on truncated packets)
6832 REG_WR(bp, BRB1_REG_BRB1_INT_MASK, 0xFC00);
6833 REG_WR(bp, QM_REG_QM_INT_MASK, 0);
6834 REG_WR(bp, TM_REG_TM_INT_MASK, 0);
6835 REG_WR(bp, XSDM_REG_XSDM_INT_MASK_0, 0);
6836 REG_WR(bp, XSDM_REG_XSDM_INT_MASK_1, 0);
6837 REG_WR(bp, XCM_REG_XCM_INT_MASK, 0);
6838 /* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_0, 0); */
6839 /* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_1, 0); */
6840 REG_WR(bp, USDM_REG_USDM_INT_MASK_0, 0);
6841 REG_WR(bp, USDM_REG_USDM_INT_MASK_1, 0);
6842 REG_WR(bp, UCM_REG_UCM_INT_MASK, 0);
6843 /* REG_WR(bp, USEM_REG_USEM_INT_MASK_0, 0); */
6844 /* REG_WR(bp, USEM_REG_USEM_INT_MASK_1, 0); */
6845 REG_WR(bp, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
6846 REG_WR(bp, CSDM_REG_CSDM_INT_MASK_0, 0);
6847 REG_WR(bp, CSDM_REG_CSDM_INT_MASK_1, 0);
6848 REG_WR(bp, CCM_REG_CCM_INT_MASK, 0);
6849 /* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */
6850 /* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */
6852 val = PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT |
6853 PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF |
6854 PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN;
6855 if (!CHIP_IS_E1x(bp))
6856 val |= PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED |
6857 PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED;
6858 REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, val);
6860 REG_WR(bp, TSDM_REG_TSDM_INT_MASK_0, 0);
6861 REG_WR(bp, TSDM_REG_TSDM_INT_MASK_1, 0);
6862 REG_WR(bp, TCM_REG_TCM_INT_MASK, 0);
6863 /* REG_WR(bp, TSEM_REG_TSEM_INT_MASK_0, 0); */
6865 if (!CHIP_IS_E1x(bp))
6866 /* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
6867 REG_WR(bp, TSEM_REG_TSEM_INT_MASK_1, 0x07ff);
6869 REG_WR(bp, CDU_REG_CDU_INT_MASK, 0);
6870 REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0);
6871 /* REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */
6872 REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */
6875 static void bnx2x_reset_common(struct bnx2x *bp)
6880 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
6883 if (CHIP_IS_E3(bp)) {
6884 val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
6885 val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
6888 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, val);
6891 static void bnx2x_setup_dmae(struct bnx2x *bp)
6894 spin_lock_init(&bp->dmae_lock);
6897 static void bnx2x_init_pxp(struct bnx2x *bp)
6900 int r_order, w_order;
6902 pcie_capability_read_word(bp->pdev, PCI_EXP_DEVCTL, &devctl);
6903 DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
6904 w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
6906 r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
6908 DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
6912 bnx2x_init_pxp_arb(bp, r_order, w_order);
6915 static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp)
6925 val = SHMEM_RD(bp, dev_info.shared_hw_config.config2) &
6926 SHARED_HW_CFG_FAN_FAILURE_MASK;
6928 if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED)
6932 * The fan failure mechanism is usually related to the PHY type since
6933 * the power consumption of the board is affected by the PHY. Currently,
6934 * fan is required for most designs with SFX7101, BCM8727 and BCM8481.
6936 else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE)
6937 for (port = PORT_0; port < PORT_MAX; port++) {
6939 bnx2x_fan_failure_det_req(
6941 bp->common.shmem_base,
6942 bp->common.shmem2_base,
6946 DP(NETIF_MSG_HW, "fan detection setting: %d\n", is_required);
6948 if (is_required == 0)
6951 /* Fan failure is indicated by SPIO 5 */
6952 bnx2x_set_spio(bp, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z);
6954 /* set to active low mode */
6955 val = REG_RD(bp, MISC_REG_SPIO_INT);
6956 val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS);
6957 REG_WR(bp, MISC_REG_SPIO_INT, val);
6959 /* enable interrupt to signal the IGU */
6960 val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
6961 val |= MISC_SPIO_SPIO5;
6962 REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
6965 void bnx2x_pf_disable(struct bnx2x *bp)
6967 u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
6968 val &= ~IGU_PF_CONF_FUNC_EN;
6970 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
6971 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
6972 REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 0);
6975 static void bnx2x__common_init_phy(struct bnx2x *bp)
6977 u32 shmem_base[2], shmem2_base[2];
6978 /* Avoid common init in case MFW supports LFA */
6979 if (SHMEM2_RD(bp, size) >
6980 (u32)offsetof(struct shmem2_region, lfa_host_addr[BP_PORT(bp)]))
6982 shmem_base[0] = bp->common.shmem_base;
6983 shmem2_base[0] = bp->common.shmem2_base;
6984 if (!CHIP_IS_E1x(bp)) {
6986 SHMEM2_RD(bp, other_shmem_base_addr);
6988 SHMEM2_RD(bp, other_shmem2_base_addr);
6990 bnx2x_acquire_phy_lock(bp);
6991 bnx2x_common_init_phy(bp, shmem_base, shmem2_base,
6992 bp->common.chip_id);
6993 bnx2x_release_phy_lock(bp);
6996 static void bnx2x_config_endianity(struct bnx2x *bp, u32 val)
6998 REG_WR(bp, PXP2_REG_RQ_QM_ENDIAN_M, val);
6999 REG_WR(bp, PXP2_REG_RQ_TM_ENDIAN_M, val);
7000 REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, val);
7001 REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, val);
7002 REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, val);
7004 /* make sure this value is 0 */
7005 REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 0);
7007 REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, val);
7008 REG_WR(bp, PXP2_REG_RD_TM_SWAP_MODE, val);
7009 REG_WR(bp, PXP2_REG_RD_SRC_SWAP_MODE, val);
7010 REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, val);
7013 static void bnx2x_set_endianity(struct bnx2x *bp)
7016 bnx2x_config_endianity(bp, 1);
7018 bnx2x_config_endianity(bp, 0);
7022 static void bnx2x_reset_endianity(struct bnx2x *bp)
7024 bnx2x_config_endianity(bp, 0);
7028 * bnx2x_init_hw_common - initialize the HW at the COMMON phase.
7030 * @bp: driver handle
7032 static int bnx2x_init_hw_common(struct bnx2x *bp)
7036 DP(NETIF_MSG_HW, "starting common init func %d\n", BP_ABS_FUNC(bp));
7039 * take the RESET lock to protect undi_unload flow from accessing
7040 * registers while we're resetting the chip
7042 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
7044 bnx2x_reset_common(bp);
7045 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
7048 if (CHIP_IS_E3(bp)) {
7049 val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
7050 val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
7052 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val);
7054 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
7056 bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON);
7058 if (!CHIP_IS_E1x(bp)) {
7062 * 4-port mode or 2-port mode we need to turn of master-enable
7063 * for everyone, after that, turn it back on for self.
7064 * so, we disregard multi-function or not, and always disable
7065 * for all functions on the given path, this means 0,2,4,6 for
7066 * path 0 and 1,3,5,7 for path 1
7068 for (abs_func_id = BP_PATH(bp);
7069 abs_func_id < E2_FUNC_MAX*2; abs_func_id += 2) {
7070 if (abs_func_id == BP_ABS_FUNC(bp)) {
7072 PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER,
7077 bnx2x_pretend_func(bp, abs_func_id);
7078 /* clear pf enable */
7079 bnx2x_pf_disable(bp);
7080 bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
7084 bnx2x_init_block(bp, BLOCK_PXP, PHASE_COMMON);
7085 if (CHIP_IS_E1(bp)) {
7086 /* enable HW interrupt from PXP on USDM overflow
7087 bit 16 on INT_MASK_0 */
7088 REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
7091 bnx2x_init_block(bp, BLOCK_PXP2, PHASE_COMMON);
7093 bnx2x_set_endianity(bp);
7094 bnx2x_ilt_init_page_size(bp, INITOP_SET);
7096 if (CHIP_REV_IS_FPGA(bp) && CHIP_IS_E1H(bp))
7097 REG_WR(bp, PXP2_REG_PGL_TAGS_LIMIT, 0x1);
7099 /* let the HW do it's magic ... */
7101 /* finish PXP init */
7102 val = REG_RD(bp, PXP2_REG_RQ_CFG_DONE);
7104 BNX2X_ERR("PXP2 CFG failed\n");
7107 val = REG_RD(bp, PXP2_REG_RD_INIT_DONE);
7109 BNX2X_ERR("PXP2 RD_INIT failed\n");
7113 /* Timers bug workaround E2 only. We need to set the entire ILT to
7114 * have entries with value "0" and valid bit on.
7115 * This needs to be done by the first PF that is loaded in a path
7116 * (i.e. common phase)
7118 if (!CHIP_IS_E1x(bp)) {
7119 /* In E2 there is a bug in the timers block that can cause function 6 / 7
7120 * (i.e. vnic3) to start even if it is marked as "scan-off".
7121 * This occurs when a different function (func2,3) is being marked
7122 * as "scan-off". Real-life scenario for example: if a driver is being
7123 * load-unloaded while func6,7 are down. This will cause the timer to access
7124 * the ilt, translate to a logical address and send a request to read/write.
7125 * Since the ilt for the function that is down is not valid, this will cause
7126 * a translation error which is unrecoverable.
7127 * The Workaround is intended to make sure that when this happens nothing fatal
7128 * will occur. The workaround:
7129 * 1. First PF driver which loads on a path will:
7130 * a. After taking the chip out of reset, by using pretend,
7131 * it will write "0" to the following registers of
7133 * REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
7134 * REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
7135 * REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
7136 * And for itself it will write '1' to
7137 * PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
7138 * dmae-operations (writing to pram for example.)
7139 * note: can be done for only function 6,7 but cleaner this
7141 * b. Write zero+valid to the entire ILT.
7142 * c. Init the first_timers_ilt_entry, last_timers_ilt_entry of
7143 * VNIC3 (of that port). The range allocated will be the
7144 * entire ILT. This is needed to prevent ILT range error.
7145 * 2. Any PF driver load flow:
7146 * a. ILT update with the physical addresses of the allocated
7148 * b. Wait 20msec. - note that this timeout is needed to make
7149 * sure there are no requests in one of the PXP internal
7150 * queues with "old" ILT addresses.
7151 * c. PF enable in the PGLC.
7152 * d. Clear the was_error of the PF in the PGLC. (could have
7153 * occurred while driver was down)
7154 * e. PF enable in the CFC (WEAK + STRONG)
7155 * f. Timers scan enable
7156 * 3. PF driver unload flow:
7157 * a. Clear the Timers scan_en.
7158 * b. Polling for scan_on=0 for that PF.
7159 * c. Clear the PF enable bit in the PXP.
7160 * d. Clear the PF enable in the CFC (WEAK + STRONG)
7161 * e. Write zero+valid to all ILT entries (The valid bit must
7163 * f. If this is VNIC 3 of a port then also init
7164 * first_timers_ilt_entry to zero and last_timers_ilt_entry
7165 * to the last entry in the ILT.
7168 * Currently the PF error in the PGLC is non recoverable.
7169 * In the future the there will be a recovery routine for this error.
7170 * Currently attention is masked.
7171 * Having an MCP lock on the load/unload process does not guarantee that
7172 * there is no Timer disable during Func6/7 enable. This is because the
7173 * Timers scan is currently being cleared by the MCP on FLR.
7174 * Step 2.d can be done only for PF6/7 and the driver can also check if
7175 * there is error before clearing it. But the flow above is simpler and
7177 * All ILT entries are written by zero+valid and not just PF6/7
7178 * ILT entries since in the future the ILT entries allocation for
7179 * PF-s might be dynamic.
7181 struct ilt_client_info ilt_cli;
7182 struct bnx2x_ilt ilt;
7183 memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
7184 memset(&ilt, 0, sizeof(struct bnx2x_ilt));
7186 /* initialize dummy TM client */
7188 ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
7189 ilt_cli.client_num = ILT_CLIENT_TM;
7191 /* Step 1: set zeroes to all ilt page entries with valid bit on
7192 * Step 2: set the timers first/last ilt entry to point
7193 * to the entire range to prevent ILT range error for 3rd/4th
7194 * vnic (this code assumes existence of the vnic)
7196 * both steps performed by call to bnx2x_ilt_client_init_op()
7197 * with dummy TM client
7199 * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
7200 * and his brother are split registers
7202 bnx2x_pretend_func(bp, (BP_PATH(bp) + 6));
7203 bnx2x_ilt_client_init_op_ilt(bp, &ilt, &ilt_cli, INITOP_CLEAR);
7204 bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
7206 REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN);
7207 REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN);
7208 REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1);
7211 REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0);
7212 REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0);
7214 if (!CHIP_IS_E1x(bp)) {
7215 int factor = CHIP_REV_IS_EMUL(bp) ? 1000 :
7216 (CHIP_REV_IS_FPGA(bp) ? 400 : 0);
7217 bnx2x_init_block(bp, BLOCK_PGLUE_B, PHASE_COMMON);
7219 bnx2x_init_block(bp, BLOCK_ATC, PHASE_COMMON);
7221 /* let the HW do it's magic ... */
7224 val = REG_RD(bp, ATC_REG_ATC_INIT_DONE);
7225 } while (factor-- && (val != 1));
7228 BNX2X_ERR("ATC_INIT failed\n");
7233 bnx2x_init_block(bp, BLOCK_DMAE, PHASE_COMMON);
7235 bnx2x_iov_init_dmae(bp);
7237 /* clean the DMAE memory */
7239 bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8, 1);
7241 bnx2x_init_block(bp, BLOCK_TCM, PHASE_COMMON);
7243 bnx2x_init_block(bp, BLOCK_UCM, PHASE_COMMON);
7245 bnx2x_init_block(bp, BLOCK_CCM, PHASE_COMMON);
7247 bnx2x_init_block(bp, BLOCK_XCM, PHASE_COMMON);
7249 bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3);
7250 bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3);
7251 bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3);
7252 bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3);
7254 bnx2x_init_block(bp, BLOCK_QM, PHASE_COMMON);
7256 /* QM queues pointers table */
7257 bnx2x_qm_init_ptr_table(bp, bp->qm_cid_count, INITOP_SET);
7259 /* soft reset pulse */
7260 REG_WR(bp, QM_REG_SOFT_RESET, 1);
7261 REG_WR(bp, QM_REG_SOFT_RESET, 0);
7263 if (CNIC_SUPPORT(bp))
7264 bnx2x_init_block(bp, BLOCK_TM, PHASE_COMMON);
7266 bnx2x_init_block(bp, BLOCK_DORQ, PHASE_COMMON);
7268 if (!CHIP_REV_IS_SLOW(bp))
7269 /* enable hw interrupt from doorbell Q */
7270 REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
7272 bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON);
7274 bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON);
7275 REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
7277 if (!CHIP_IS_E1(bp))
7278 REG_WR(bp, PRS_REG_E1HOV_MODE, bp->path_has_ovlan);
7280 if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3B0(bp)) {
7281 if (IS_MF_AFEX(bp)) {
7282 /* configure that VNTag and VLAN headers must be
7283 * received in afex mode
7285 REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC, 0xE);
7286 REG_WR(bp, PRS_REG_MUST_HAVE_HDRS, 0xA);
7287 REG_WR(bp, PRS_REG_HDRS_AFTER_TAG_0, 0x6);
7288 REG_WR(bp, PRS_REG_TAG_ETHERTYPE_0, 0x8926);
7289 REG_WR(bp, PRS_REG_TAG_LEN_0, 0x4);
7291 /* Bit-map indicating which L2 hdrs may appear
7292 * after the basic Ethernet header
7294 REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC,
7295 bp->path_has_ovlan ? 7 : 6);
7299 bnx2x_init_block(bp, BLOCK_TSDM, PHASE_COMMON);
7300 bnx2x_init_block(bp, BLOCK_CSDM, PHASE_COMMON);
7301 bnx2x_init_block(bp, BLOCK_USDM, PHASE_COMMON);
7302 bnx2x_init_block(bp, BLOCK_XSDM, PHASE_COMMON);
7304 if (!CHIP_IS_E1x(bp)) {
7305 /* reset VFC memories */
7306 REG_WR(bp, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
7307 VFC_MEMORIES_RST_REG_CAM_RST |
7308 VFC_MEMORIES_RST_REG_RAM_RST);
7309 REG_WR(bp, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
7310 VFC_MEMORIES_RST_REG_CAM_RST |
7311 VFC_MEMORIES_RST_REG_RAM_RST);
7316 bnx2x_init_block(bp, BLOCK_TSEM, PHASE_COMMON);
7317 bnx2x_init_block(bp, BLOCK_USEM, PHASE_COMMON);
7318 bnx2x_init_block(bp, BLOCK_CSEM, PHASE_COMMON);
7319 bnx2x_init_block(bp, BLOCK_XSEM, PHASE_COMMON);
7322 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
7324 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
7327 bnx2x_init_block(bp, BLOCK_UPB, PHASE_COMMON);
7328 bnx2x_init_block(bp, BLOCK_XPB, PHASE_COMMON);
7329 bnx2x_init_block(bp, BLOCK_PBF, PHASE_COMMON);
7331 if (!CHIP_IS_E1x(bp)) {
7332 if (IS_MF_AFEX(bp)) {
7333 /* configure that VNTag and VLAN headers must be
7336 REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC, 0xE);
7337 REG_WR(bp, PBF_REG_MUST_HAVE_HDRS, 0xA);
7338 REG_WR(bp, PBF_REG_HDRS_AFTER_TAG_0, 0x6);
7339 REG_WR(bp, PBF_REG_TAG_ETHERTYPE_0, 0x8926);
7340 REG_WR(bp, PBF_REG_TAG_LEN_0, 0x4);
7342 REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC,
7343 bp->path_has_ovlan ? 7 : 6);
7347 REG_WR(bp, SRC_REG_SOFT_RST, 1);
7349 bnx2x_init_block(bp, BLOCK_SRC, PHASE_COMMON);
7351 if (CNIC_SUPPORT(bp)) {
7352 REG_WR(bp, SRC_REG_KEYSEARCH_0, 0x63285672);
7353 REG_WR(bp, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
7354 REG_WR(bp, SRC_REG_KEYSEARCH_2, 0x223aef9b);
7355 REG_WR(bp, SRC_REG_KEYSEARCH_3, 0x26001e3a);
7356 REG_WR(bp, SRC_REG_KEYSEARCH_4, 0x7ae91116);
7357 REG_WR(bp, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
7358 REG_WR(bp, SRC_REG_KEYSEARCH_6, 0x298d8adf);
7359 REG_WR(bp, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
7360 REG_WR(bp, SRC_REG_KEYSEARCH_8, 0x1830f82f);
7361 REG_WR(bp, SRC_REG_KEYSEARCH_9, 0x01e46be7);
7363 REG_WR(bp, SRC_REG_SOFT_RST, 0);
7365 if (sizeof(union cdu_context) != 1024)
7366 /* we currently assume that a context is 1024 bytes */
7367 dev_alert(&bp->pdev->dev,
7368 "please adjust the size of cdu_context(%ld)\n",
7369 (long)sizeof(union cdu_context));
7371 bnx2x_init_block(bp, BLOCK_CDU, PHASE_COMMON);
7372 val = (4 << 24) + (0 << 12) + 1024;
7373 REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val);
7375 bnx2x_init_block(bp, BLOCK_CFC, PHASE_COMMON);
7376 REG_WR(bp, CFC_REG_INIT_REG, 0x7FF);
7377 /* enable context validation interrupt from CFC */
7378 REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
7380 /* set the thresholds to prevent CFC/CDU race */
7381 REG_WR(bp, CFC_REG_DEBUG0, 0x20020000);
7383 bnx2x_init_block(bp, BLOCK_HC, PHASE_COMMON);
7385 if (!CHIP_IS_E1x(bp) && BP_NOMCP(bp))
7386 REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x36);
7388 bnx2x_init_block(bp, BLOCK_IGU, PHASE_COMMON);
7389 bnx2x_init_block(bp, BLOCK_MISC_AEU, PHASE_COMMON);
7391 /* Reset PCIE errors for debug */
7392 REG_WR(bp, 0x2814, 0xffffffff);
7393 REG_WR(bp, 0x3820, 0xffffffff);
7395 if (!CHIP_IS_E1x(bp)) {
7396 REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_CONTROL_5,
7397 (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 |
7398 PXPCS_TL_CONTROL_5_ERR_UNSPPORT));
7399 REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT,
7400 (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 |
7401 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 |
7402 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2));
7403 REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT,
7404 (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 |
7405 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 |
7406 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5));
7409 bnx2x_init_block(bp, BLOCK_NIG, PHASE_COMMON);
7410 if (!CHIP_IS_E1(bp)) {
7411 /* in E3 this done in per-port section */
7412 if (!CHIP_IS_E3(bp))
7413 REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_MF(bp));
7415 if (CHIP_IS_E1H(bp))
7416 /* not applicable for E2 (and above ...) */
7417 REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(bp));
7419 if (CHIP_REV_IS_SLOW(bp))
7422 /* finish CFC init */
7423 val = reg_poll(bp, CFC_REG_LL_INIT_DONE, 1, 100, 10);
7425 BNX2X_ERR("CFC LL_INIT failed\n");
7428 val = reg_poll(bp, CFC_REG_AC_INIT_DONE, 1, 100, 10);
7430 BNX2X_ERR("CFC AC_INIT failed\n");
7433 val = reg_poll(bp, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
7435 BNX2X_ERR("CFC CAM_INIT failed\n");
7438 REG_WR(bp, CFC_REG_DEBUG0, 0);
7440 if (CHIP_IS_E1(bp)) {
7441 /* read NIG statistic
7442 to see if this is our first up since powerup */
7443 bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
7444 val = *bnx2x_sp(bp, wb_data[0]);
7446 /* do internal memory self test */
7447 if ((val == 0) && bnx2x_int_mem_test(bp)) {
7448 BNX2X_ERR("internal mem self test failed\n");
7453 bnx2x_setup_fan_failure_detection(bp);
7455 /* clear PXP2 attentions */
7456 REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0);
7458 bnx2x_enable_blocks_attention(bp);
7459 bnx2x_enable_blocks_parity(bp);
7461 if (!BP_NOMCP(bp)) {
7462 if (CHIP_IS_E1x(bp))
7463 bnx2x__common_init_phy(bp);
7465 BNX2X_ERR("Bootcode is missing - can not initialize link\n");
7467 if (SHMEM2_HAS(bp, netproc_fw_ver))
7468 SHMEM2_WR(bp, netproc_fw_ver, REG_RD(bp, XSEM_REG_PRAM));
7474 * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase.
7476 * @bp: driver handle
7478 static int bnx2x_init_hw_common_chip(struct bnx2x *bp)
7480 int rc = bnx2x_init_hw_common(bp);
7485 /* In E2 2-PORT mode, same ext phy is used for the two paths */
7487 bnx2x__common_init_phy(bp);
7492 static int bnx2x_init_hw_port(struct bnx2x *bp)
7494 int port = BP_PORT(bp);
7495 int init_phase = port ? PHASE_PORT1 : PHASE_PORT0;
7499 DP(NETIF_MSG_HW, "starting port init port %d\n", port);
7501 REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
7503 bnx2x_init_block(bp, BLOCK_MISC, init_phase);
7504 bnx2x_init_block(bp, BLOCK_PXP, init_phase);
7505 bnx2x_init_block(bp, BLOCK_PXP2, init_phase);
7507 /* Timers bug workaround: disables the pf_master bit in pglue at
7508 * common phase, we need to enable it here before any dmae access are
7509 * attempted. Therefore we manually added the enable-master to the
7510 * port phase (it also happens in the function phase)
7512 if (!CHIP_IS_E1x(bp))
7513 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
7515 bnx2x_init_block(bp, BLOCK_ATC, init_phase);
7516 bnx2x_init_block(bp, BLOCK_DMAE, init_phase);
7517 bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase);
7518 bnx2x_init_block(bp, BLOCK_QM, init_phase);
7520 bnx2x_init_block(bp, BLOCK_TCM, init_phase);
7521 bnx2x_init_block(bp, BLOCK_UCM, init_phase);
7522 bnx2x_init_block(bp, BLOCK_CCM, init_phase);
7523 bnx2x_init_block(bp, BLOCK_XCM, init_phase);
7525 /* QM cid (connection) count */
7526 bnx2x_qm_init_cid_count(bp, bp->qm_cid_count, INITOP_SET);
7528 if (CNIC_SUPPORT(bp)) {
7529 bnx2x_init_block(bp, BLOCK_TM, init_phase);
7530 REG_WR(bp, TM_REG_LIN0_SCAN_TIME + port*4, 20);
7531 REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31);
7534 bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
7536 bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
7538 if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) {
7541 low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246);
7542 else if (bp->dev->mtu > 4096) {
7543 if (bp->flags & ONE_PORT_FLAG)
7547 /* (24*1024 + val*4)/256 */
7548 low = 96 + (val/64) +
7549 ((val % 64) ? 1 : 0);
7552 low = ((bp->flags & ONE_PORT_FLAG) ? 80 : 160);
7553 high = low + 56; /* 14*1024/256 */
7554 REG_WR(bp, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port*4, low);
7555 REG_WR(bp, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port*4, high);
7558 if (CHIP_MODE_IS_4_PORT(bp))
7559 REG_WR(bp, (BP_PORT(bp) ?
7560 BRB1_REG_MAC_GUARANTIED_1 :
7561 BRB1_REG_MAC_GUARANTIED_0), 40);
7563 bnx2x_init_block(bp, BLOCK_PRS, init_phase);
7564 if (CHIP_IS_E3B0(bp)) {
7565 if (IS_MF_AFEX(bp)) {
7566 /* configure headers for AFEX mode */
7567 REG_WR(bp, BP_PORT(bp) ?
7568 PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
7569 PRS_REG_HDRS_AFTER_BASIC_PORT_0, 0xE);
7570 REG_WR(bp, BP_PORT(bp) ?
7571 PRS_REG_HDRS_AFTER_TAG_0_PORT_1 :
7572 PRS_REG_HDRS_AFTER_TAG_0_PORT_0, 0x6);
7573 REG_WR(bp, BP_PORT(bp) ?
7574 PRS_REG_MUST_HAVE_HDRS_PORT_1 :
7575 PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA);
7577 /* Ovlan exists only if we are in multi-function +
7578 * switch-dependent mode, in switch-independent there
7579 * is no ovlan headers
7581 REG_WR(bp, BP_PORT(bp) ?
7582 PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
7583 PRS_REG_HDRS_AFTER_BASIC_PORT_0,
7584 (bp->path_has_ovlan ? 7 : 6));
7588 bnx2x_init_block(bp, BLOCK_TSDM, init_phase);
7589 bnx2x_init_block(bp, BLOCK_CSDM, init_phase);
7590 bnx2x_init_block(bp, BLOCK_USDM, init_phase);
7591 bnx2x_init_block(bp, BLOCK_XSDM, init_phase);
7593 bnx2x_init_block(bp, BLOCK_TSEM, init_phase);
7594 bnx2x_init_block(bp, BLOCK_USEM, init_phase);
7595 bnx2x_init_block(bp, BLOCK_CSEM, init_phase);
7596 bnx2x_init_block(bp, BLOCK_XSEM, init_phase);
7598 bnx2x_init_block(bp, BLOCK_UPB, init_phase);
7599 bnx2x_init_block(bp, BLOCK_XPB, init_phase);
7601 bnx2x_init_block(bp, BLOCK_PBF, init_phase);
7603 if (CHIP_IS_E1x(bp)) {
7604 /* configure PBF to work without PAUSE mtu 9000 */
7605 REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
7607 /* update threshold */
7608 REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, (9040/16));
7609 /* update init credit */
7610 REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, (9040/16) + 553 - 22);
7613 REG_WR(bp, PBF_REG_INIT_P0 + port*4, 1);
7615 REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0);
7618 if (CNIC_SUPPORT(bp))
7619 bnx2x_init_block(bp, BLOCK_SRC, init_phase);
7621 bnx2x_init_block(bp, BLOCK_CDU, init_phase);
7622 bnx2x_init_block(bp, BLOCK_CFC, init_phase);
7624 if (CHIP_IS_E1(bp)) {
7625 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
7626 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
7628 bnx2x_init_block(bp, BLOCK_HC, init_phase);
7630 bnx2x_init_block(bp, BLOCK_IGU, init_phase);
7632 bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase);
7633 /* init aeu_mask_attn_func_0/1:
7634 * - SF mode: bits 3-7 are masked. Only bits 0-2 are in use
7635 * - MF mode: bit 3 is masked. Bits 0-2 are in use as in SF
7636 * bits 4-7 are used for "per vn group attention" */
7637 val = IS_MF(bp) ? 0xF7 : 0x7;
7638 /* Enable DCBX attention for all but E1 */
7639 val |= CHIP_IS_E1(bp) ? 0 : 0x10;
7640 REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val);
7642 /* SCPAD_PARITY should NOT trigger close the gates */
7643 reg = port ? MISC_REG_AEU_ENABLE4_NIG_1 : MISC_REG_AEU_ENABLE4_NIG_0;
7646 ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY);
7648 reg = port ? MISC_REG_AEU_ENABLE4_PXP_1 : MISC_REG_AEU_ENABLE4_PXP_0;
7651 ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY);
7653 bnx2x_init_block(bp, BLOCK_NIG, init_phase);
7655 if (!CHIP_IS_E1x(bp)) {
7656 /* Bit-map indicating which L2 hdrs may appear after the
7657 * basic Ethernet header
7660 REG_WR(bp, BP_PORT(bp) ?
7661 NIG_REG_P1_HDRS_AFTER_BASIC :
7662 NIG_REG_P0_HDRS_AFTER_BASIC, 0xE);
7664 REG_WR(bp, BP_PORT(bp) ?
7665 NIG_REG_P1_HDRS_AFTER_BASIC :
7666 NIG_REG_P0_HDRS_AFTER_BASIC,
7667 IS_MF_SD(bp) ? 7 : 6);
7670 REG_WR(bp, BP_PORT(bp) ?
7671 NIG_REG_LLH1_MF_MODE :
7672 NIG_REG_LLH_MF_MODE, IS_MF(bp));
7674 if (!CHIP_IS_E3(bp))
7675 REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
7677 if (!CHIP_IS_E1(bp)) {
7678 /* 0x2 disable mf_ov, 0x1 enable */
7679 REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4,
7680 (IS_MF_SD(bp) ? 0x1 : 0x2));
7682 if (!CHIP_IS_E1x(bp)) {
7684 switch (bp->mf_mode) {
7685 case MULTI_FUNCTION_SD:
7688 case MULTI_FUNCTION_SI:
7689 case MULTI_FUNCTION_AFEX:
7694 REG_WR(bp, (BP_PORT(bp) ? NIG_REG_LLH1_CLS_TYPE :
7695 NIG_REG_LLH0_CLS_TYPE), val);
7698 REG_WR(bp, NIG_REG_LLFC_ENABLE_0 + port*4, 0);
7699 REG_WR(bp, NIG_REG_LLFC_OUT_EN_0 + port*4, 0);
7700 REG_WR(bp, NIG_REG_PAUSE_ENABLE_0 + port*4, 1);
7704 /* If SPIO5 is set to generate interrupts, enable it for this port */
7705 val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
7706 if (val & MISC_SPIO_SPIO5) {
7707 u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
7708 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
7709 val = REG_RD(bp, reg_addr);
7710 val |= AEU_INPUTS_ATTN_BITS_SPIO5;
7711 REG_WR(bp, reg_addr, val);
7717 static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr)
7723 reg = PXP2_REG_RQ_ONCHIP_AT + index*8;
7725 reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index*8;
7727 wb_write[0] = ONCHIP_ADDR1(addr);
7728 wb_write[1] = ONCHIP_ADDR2(addr);
7729 REG_WR_DMAE(bp, reg, wb_write, 2);
7732 void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, bool is_pf)
7734 u32 data, ctl, cnt = 100;
7735 u32 igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA;
7736 u32 igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL;
7737 u32 igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP + (idu_sb_id/32)*4;
7738 u32 sb_bit = 1 << (idu_sb_id%32);
7739 u32 func_encode = func | (is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT;
7740 u32 addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id;
7742 /* Not supported in BC mode */
7743 if (CHIP_INT_MODE_IS_BC(bp))
7746 data = (IGU_USE_REGISTER_cstorm_type_0_sb_cleanup
7747 << IGU_REGULAR_CLEANUP_TYPE_SHIFT) |
7748 IGU_REGULAR_CLEANUP_SET |
7749 IGU_REGULAR_BCLEANUP;
7751 ctl = addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT |
7752 func_encode << IGU_CTRL_REG_FID_SHIFT |
7753 IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT;
7755 DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
7756 data, igu_addr_data);
7757 REG_WR(bp, igu_addr_data, data);
7760 DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
7762 REG_WR(bp, igu_addr_ctl, ctl);
7766 /* wait for clean up to finish */
7767 while (!(REG_RD(bp, igu_addr_ack) & sb_bit) && --cnt)
7770 if (!(REG_RD(bp, igu_addr_ack) & sb_bit)) {
7772 "Unable to finish IGU cleanup: idu_sb_id %d offset %d bit %d (cnt %d)\n",
7773 idu_sb_id, idu_sb_id/32, idu_sb_id%32, cnt);
7777 static void bnx2x_igu_clear_sb(struct bnx2x *bp, u8 idu_sb_id)
7779 bnx2x_igu_clear_sb_gen(bp, BP_FUNC(bp), idu_sb_id, true /*PF*/);
7782 static void bnx2x_clear_func_ilt(struct bnx2x *bp, u32 func)
7784 u32 i, base = FUNC_ILT_BASE(func);
7785 for (i = base; i < base + ILT_PER_FUNC; i++)
7786 bnx2x_ilt_wr(bp, i, 0);
7789 static void bnx2x_init_searcher(struct bnx2x *bp)
7791 int port = BP_PORT(bp);
7792 bnx2x_src_init_t2(bp, bp->t2, bp->t2_mapping, SRC_CONN_NUM);
7793 /* T1 hash bits value determines the T1 number of entries */
7794 REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + port*4, SRC_HASH_BITS);
7797 static inline int bnx2x_func_switch_update(struct bnx2x *bp, int suspend)
7800 struct bnx2x_func_state_params func_params = {NULL};
7801 struct bnx2x_func_switch_update_params *switch_update_params =
7802 &func_params.params.switch_update;
7804 /* Prepare parameters for function state transitions */
7805 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
7806 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags);
7808 func_params.f_obj = &bp->func_obj;
7809 func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE;
7811 /* Function parameters */
7812 __set_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND_CHNG,
7813 &switch_update_params->changes);
7815 __set_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND,
7816 &switch_update_params->changes);
7818 rc = bnx2x_func_state_change(bp, &func_params);
7823 static int bnx2x_reset_nic_mode(struct bnx2x *bp)
7825 int rc, i, port = BP_PORT(bp);
7826 int vlan_en = 0, mac_en[NUM_MACS];
7828 /* Close input from network */
7829 if (bp->mf_mode == SINGLE_FUNCTION) {
7830 bnx2x_set_rx_filter(&bp->link_params, 0);
7832 vlan_en = REG_RD(bp, port ? NIG_REG_LLH1_FUNC_EN :
7833 NIG_REG_LLH0_FUNC_EN);
7834 REG_WR(bp, port ? NIG_REG_LLH1_FUNC_EN :
7835 NIG_REG_LLH0_FUNC_EN, 0);
7836 for (i = 0; i < NUM_MACS; i++) {
7837 mac_en[i] = REG_RD(bp, port ?
7838 (NIG_REG_LLH1_FUNC_MEM_ENABLE +
7840 (NIG_REG_LLH0_FUNC_MEM_ENABLE +
7842 REG_WR(bp, port ? (NIG_REG_LLH1_FUNC_MEM_ENABLE +
7844 (NIG_REG_LLH0_FUNC_MEM_ENABLE + 4 * i), 0);
7848 /* Close BMC to host */
7849 REG_WR(bp, port ? NIG_REG_P0_TX_MNG_HOST_ENABLE :
7850 NIG_REG_P1_TX_MNG_HOST_ENABLE, 0);
7852 /* Suspend Tx switching to the PF. Completion of this ramrod
7853 * further guarantees that all the packets of that PF / child
7854 * VFs in BRB were processed by the Parser, so it is safe to
7855 * change the NIC_MODE register.
7857 rc = bnx2x_func_switch_update(bp, 1);
7859 BNX2X_ERR("Can't suspend tx-switching!\n");
7863 /* Change NIC_MODE register */
7864 REG_WR(bp, PRS_REG_NIC_MODE, 0);
7866 /* Open input from network */
7867 if (bp->mf_mode == SINGLE_FUNCTION) {
7868 bnx2x_set_rx_filter(&bp->link_params, 1);
7870 REG_WR(bp, port ? NIG_REG_LLH1_FUNC_EN :
7871 NIG_REG_LLH0_FUNC_EN, vlan_en);
7872 for (i = 0; i < NUM_MACS; i++) {
7873 REG_WR(bp, port ? (NIG_REG_LLH1_FUNC_MEM_ENABLE +
7875 (NIG_REG_LLH0_FUNC_MEM_ENABLE + 4 * i),
7880 /* Enable BMC to host */
7881 REG_WR(bp, port ? NIG_REG_P0_TX_MNG_HOST_ENABLE :
7882 NIG_REG_P1_TX_MNG_HOST_ENABLE, 1);
7884 /* Resume Tx switching to the PF */
7885 rc = bnx2x_func_switch_update(bp, 0);
7887 BNX2X_ERR("Can't resume tx-switching!\n");
7891 DP(NETIF_MSG_IFUP, "NIC MODE disabled\n");
7895 int bnx2x_init_hw_func_cnic(struct bnx2x *bp)
7899 bnx2x_ilt_init_op_cnic(bp, INITOP_SET);
7901 if (CONFIGURE_NIC_MODE(bp)) {
7902 /* Configure searcher as part of function hw init */
7903 bnx2x_init_searcher(bp);
7905 /* Reset NIC mode */
7906 rc = bnx2x_reset_nic_mode(bp);
7908 BNX2X_ERR("Can't change NIC mode!\n");
7915 /* previous driver DMAE transaction may have occurred when pre-boot stage ended
7916 * and boot began, or when kdump kernel was loaded. Either case would invalidate
7917 * the addresses of the transaction, resulting in was-error bit set in the pci
7918 * causing all hw-to-host pcie transactions to timeout. If this happened we want
7919 * to clear the interrupt which detected this from the pglueb and the was done
7922 static void bnx2x_clean_pglue_errors(struct bnx2x *bp)
7924 if (!CHIP_IS_E1x(bp))
7925 REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
7926 1 << BP_ABS_FUNC(bp));
7929 static int bnx2x_init_hw_func(struct bnx2x *bp)
7931 int port = BP_PORT(bp);
7932 int func = BP_FUNC(bp);
7933 int init_phase = PHASE_PF0 + func;
7934 struct bnx2x_ilt *ilt = BP_ILT(bp);
7937 u32 main_mem_base, main_mem_size, main_mem_prty_clr;
7938 int i, main_mem_width, rc;
7940 DP(NETIF_MSG_HW, "starting func init func %d\n", func);
7942 /* FLR cleanup - hmmm */
7943 if (!CHIP_IS_E1x(bp)) {
7944 rc = bnx2x_pf_flr_clnup(bp);
7951 /* set MSI reconfigure capability */
7952 if (bp->common.int_block == INT_BLOCK_HC) {
7953 addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
7954 val = REG_RD(bp, addr);
7955 val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
7956 REG_WR(bp, addr, val);
7959 bnx2x_init_block(bp, BLOCK_PXP, init_phase);
7960 bnx2x_init_block(bp, BLOCK_PXP2, init_phase);
7963 cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
7966 cdu_ilt_start += BNX2X_FIRST_VF_CID/ILT_PAGE_CIDS;
7967 cdu_ilt_start = bnx2x_iov_init_ilt(bp, cdu_ilt_start);
7969 /* since BNX2X_FIRST_VF_CID > 0 the PF L2 cids precedes
7970 * those of the VFs, so start line should be reset
7972 cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
7973 for (i = 0; i < L2_ILT_LINES(bp); i++) {
7974 ilt->lines[cdu_ilt_start + i].page = bp->context[i].vcxt;
7975 ilt->lines[cdu_ilt_start + i].page_mapping =
7976 bp->context[i].cxt_mapping;
7977 ilt->lines[cdu_ilt_start + i].size = bp->context[i].size;
7980 bnx2x_ilt_init_op(bp, INITOP_SET);
7982 if (!CONFIGURE_NIC_MODE(bp)) {
7983 bnx2x_init_searcher(bp);
7984 REG_WR(bp, PRS_REG_NIC_MODE, 0);
7985 DP(NETIF_MSG_IFUP, "NIC MODE disabled\n");
7988 REG_WR(bp, PRS_REG_NIC_MODE, 1);
7989 DP(NETIF_MSG_IFUP, "NIC MODE configured\n");
7992 if (!CHIP_IS_E1x(bp)) {
7993 u32 pf_conf = IGU_PF_CONF_FUNC_EN;
7995 /* Turn on a single ISR mode in IGU if driver is going to use
7998 if (!(bp->flags & USING_MSIX_FLAG))
7999 pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN;
8001 * Timers workaround bug: function init part.
8002 * Need to wait 20msec after initializing ILT,
8003 * needed to make sure there are no requests in
8004 * one of the PXP internal queues with "old" ILT addresses
8008 * Master enable - Due to WB DMAE writes performed before this
8009 * register is re-initialized as part of the regular function
8012 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
8013 /* Enable the function in IGU */
8014 REG_WR(bp, IGU_REG_PF_CONFIGURATION, pf_conf);
8019 bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase);
8021 bnx2x_clean_pglue_errors(bp);
8023 bnx2x_init_block(bp, BLOCK_ATC, init_phase);
8024 bnx2x_init_block(bp, BLOCK_DMAE, init_phase);
8025 bnx2x_init_block(bp, BLOCK_NIG, init_phase);
8026 bnx2x_init_block(bp, BLOCK_SRC, init_phase);
8027 bnx2x_init_block(bp, BLOCK_MISC, init_phase);
8028 bnx2x_init_block(bp, BLOCK_TCM, init_phase);
8029 bnx2x_init_block(bp, BLOCK_UCM, init_phase);
8030 bnx2x_init_block(bp, BLOCK_CCM, init_phase);
8031 bnx2x_init_block(bp, BLOCK_XCM, init_phase);
8032 bnx2x_init_block(bp, BLOCK_TSEM, init_phase);
8033 bnx2x_init_block(bp, BLOCK_USEM, init_phase);
8034 bnx2x_init_block(bp, BLOCK_CSEM, init_phase);
8035 bnx2x_init_block(bp, BLOCK_XSEM, init_phase);
8037 if (!CHIP_IS_E1x(bp))
8038 REG_WR(bp, QM_REG_PF_EN, 1);
8040 if (!CHIP_IS_E1x(bp)) {
8041 REG_WR(bp, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
8042 REG_WR(bp, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
8043 REG_WR(bp, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
8044 REG_WR(bp, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
8046 bnx2x_init_block(bp, BLOCK_QM, init_phase);
8048 bnx2x_init_block(bp, BLOCK_TM, init_phase);
8049 bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
8050 REG_WR(bp, DORQ_REG_MODE_ACT, 1); /* no dpm */
8052 bnx2x_iov_init_dq(bp);
8054 bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
8055 bnx2x_init_block(bp, BLOCK_PRS, init_phase);
8056 bnx2x_init_block(bp, BLOCK_TSDM, init_phase);
8057 bnx2x_init_block(bp, BLOCK_CSDM, init_phase);
8058 bnx2x_init_block(bp, BLOCK_USDM, init_phase);
8059 bnx2x_init_block(bp, BLOCK_XSDM, init_phase);
8060 bnx2x_init_block(bp, BLOCK_UPB, init_phase);
8061 bnx2x_init_block(bp, BLOCK_XPB, init_phase);
8062 bnx2x_init_block(bp, BLOCK_PBF, init_phase);
8063 if (!CHIP_IS_E1x(bp))
8064 REG_WR(bp, PBF_REG_DISABLE_PF, 0);
8066 bnx2x_init_block(bp, BLOCK_CDU, init_phase);
8068 bnx2x_init_block(bp, BLOCK_CFC, init_phase);
8070 if (!CHIP_IS_E1x(bp))
8071 REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 1);
8074 if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) {
8075 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
8076 REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8,
8081 bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase);
8083 /* HC init per function */
8084 if (bp->common.int_block == INT_BLOCK_HC) {
8085 if (CHIP_IS_E1H(bp)) {
8086 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
8088 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
8089 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
8091 bnx2x_init_block(bp, BLOCK_HC, init_phase);
8094 int num_segs, sb_idx, prod_offset;
8096 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
8098 if (!CHIP_IS_E1x(bp)) {
8099 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0);
8100 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0);
8103 bnx2x_init_block(bp, BLOCK_IGU, init_phase);
8105 if (!CHIP_IS_E1x(bp)) {
8109 * E2 mode: address 0-135 match to the mapping memory;
8110 * 136 - PF0 default prod; 137 - PF1 default prod;
8111 * 138 - PF2 default prod; 139 - PF3 default prod;
8112 * 140 - PF0 attn prod; 141 - PF1 attn prod;
8113 * 142 - PF2 attn prod; 143 - PF3 attn prod;
8116 * E1.5 mode - In backward compatible mode;
8117 * for non default SB; each even line in the memory
8118 * holds the U producer and each odd line hold
8119 * the C producer. The first 128 producers are for
8120 * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
8121 * producers are for the DSB for each PF.
8122 * Each PF has five segments: (the order inside each
8123 * segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
8124 * 132-135 C prods; 136-139 X prods; 140-143 T prods;
8125 * 144-147 attn prods;
8127 /* non-default-status-blocks */
8128 num_segs = CHIP_INT_MODE_IS_BC(bp) ?
8129 IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS;
8130 for (sb_idx = 0; sb_idx < bp->igu_sb_cnt; sb_idx++) {
8131 prod_offset = (bp->igu_base_sb + sb_idx) *
8134 for (i = 0; i < num_segs; i++) {
8135 addr = IGU_REG_PROD_CONS_MEMORY +
8136 (prod_offset + i) * 4;
8137 REG_WR(bp, addr, 0);
8139 /* send consumer update with value 0 */
8140 bnx2x_ack_sb(bp, bp->igu_base_sb + sb_idx,
8141 USTORM_ID, 0, IGU_INT_NOP, 1);
8142 bnx2x_igu_clear_sb(bp,
8143 bp->igu_base_sb + sb_idx);
8146 /* default-status-blocks */
8147 num_segs = CHIP_INT_MODE_IS_BC(bp) ?
8148 IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS;
8150 if (CHIP_MODE_IS_4_PORT(bp))
8151 dsb_idx = BP_FUNC(bp);
8153 dsb_idx = BP_VN(bp);
8155 prod_offset = (CHIP_INT_MODE_IS_BC(bp) ?
8156 IGU_BC_BASE_DSB_PROD + dsb_idx :
8157 IGU_NORM_BASE_DSB_PROD + dsb_idx);
8160 * igu prods come in chunks of E1HVN_MAX (4) -
8161 * does not matters what is the current chip mode
8163 for (i = 0; i < (num_segs * E1HVN_MAX);
8165 addr = IGU_REG_PROD_CONS_MEMORY +
8166 (prod_offset + i)*4;
8167 REG_WR(bp, addr, 0);
8169 /* send consumer update with 0 */
8170 if (CHIP_INT_MODE_IS_BC(bp)) {
8171 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8172 USTORM_ID, 0, IGU_INT_NOP, 1);
8173 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8174 CSTORM_ID, 0, IGU_INT_NOP, 1);
8175 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8176 XSTORM_ID, 0, IGU_INT_NOP, 1);
8177 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8178 TSTORM_ID, 0, IGU_INT_NOP, 1);
8179 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8180 ATTENTION_ID, 0, IGU_INT_NOP, 1);
8182 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8183 USTORM_ID, 0, IGU_INT_NOP, 1);
8184 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8185 ATTENTION_ID, 0, IGU_INT_NOP, 1);
8187 bnx2x_igu_clear_sb(bp, bp->igu_dsb_id);
8189 /* !!! These should become driver const once
8190 rf-tool supports split-68 const */
8191 REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0);
8192 REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0);
8193 REG_WR(bp, IGU_REG_SB_MASK_LSB, 0);
8194 REG_WR(bp, IGU_REG_SB_MASK_MSB, 0);
8195 REG_WR(bp, IGU_REG_PBA_STATUS_LSB, 0);
8196 REG_WR(bp, IGU_REG_PBA_STATUS_MSB, 0);
8200 /* Reset PCIE errors for debug */
8201 REG_WR(bp, 0x2114, 0xffffffff);
8202 REG_WR(bp, 0x2120, 0xffffffff);
8204 if (CHIP_IS_E1x(bp)) {
8205 main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords*/
8206 main_mem_base = HC_REG_MAIN_MEMORY +
8207 BP_PORT(bp) * (main_mem_size * 4);
8208 main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR;
8211 val = REG_RD(bp, main_mem_prty_clr);
8214 "Hmmm... Parity errors in HC block during function init (0x%x)!\n",
8217 /* Clear "false" parity errors in MSI-X table */
8218 for (i = main_mem_base;
8219 i < main_mem_base + main_mem_size * 4;
8220 i += main_mem_width) {
8221 bnx2x_read_dmae(bp, i, main_mem_width / 4);
8222 bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data),
8223 i, main_mem_width / 4);
8225 /* Clear HC parity attention */
8226 REG_RD(bp, main_mem_prty_clr);
8229 #ifdef BNX2X_STOP_ON_ERROR
8230 /* Enable STORMs SP logging */
8231 REG_WR8(bp, BAR_USTRORM_INTMEM +
8232 USTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
8233 REG_WR8(bp, BAR_TSTRORM_INTMEM +
8234 TSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
8235 REG_WR8(bp, BAR_CSTRORM_INTMEM +
8236 CSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
8237 REG_WR8(bp, BAR_XSTRORM_INTMEM +
8238 XSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
8241 bnx2x_phy_probe(&bp->link_params);
8246 void bnx2x_free_mem_cnic(struct bnx2x *bp)
8248 bnx2x_ilt_mem_op_cnic(bp, ILT_MEMOP_FREE);
8250 if (!CHIP_IS_E1x(bp))
8251 BNX2X_PCI_FREE(bp->cnic_sb.e2_sb, bp->cnic_sb_mapping,
8252 sizeof(struct host_hc_status_block_e2));
8254 BNX2X_PCI_FREE(bp->cnic_sb.e1x_sb, bp->cnic_sb_mapping,
8255 sizeof(struct host_hc_status_block_e1x));
8257 BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ);
8260 void bnx2x_free_mem(struct bnx2x *bp)
8264 BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping,
8265 bp->fw_stats_data_sz + bp->fw_stats_req_sz);
8270 BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping,
8271 sizeof(struct host_sp_status_block));
8273 BNX2X_PCI_FREE(bp->slowpath, bp->slowpath_mapping,
8274 sizeof(struct bnx2x_slowpath));
8276 for (i = 0; i < L2_ILT_LINES(bp); i++)
8277 BNX2X_PCI_FREE(bp->context[i].vcxt, bp->context[i].cxt_mapping,
8278 bp->context[i].size);
8279 bnx2x_ilt_mem_op(bp, ILT_MEMOP_FREE);
8281 BNX2X_FREE(bp->ilt->lines);
8283 BNX2X_PCI_FREE(bp->spq, bp->spq_mapping, BCM_PAGE_SIZE);
8285 BNX2X_PCI_FREE(bp->eq_ring, bp->eq_mapping,
8286 BCM_PAGE_SIZE * NUM_EQ_PAGES);
8288 BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ);
8290 bnx2x_iov_free_mem(bp);
8293 int bnx2x_alloc_mem_cnic(struct bnx2x *bp)
8295 if (!CHIP_IS_E1x(bp)) {
8296 /* size = the status block + ramrod buffers */
8297 bp->cnic_sb.e2_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping,
8298 sizeof(struct host_hc_status_block_e2));
8299 if (!bp->cnic_sb.e2_sb)
8302 bp->cnic_sb.e1x_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping,
8303 sizeof(struct host_hc_status_block_e1x));
8304 if (!bp->cnic_sb.e1x_sb)
8308 if (CONFIGURE_NIC_MODE(bp) && !bp->t2) {
8309 /* allocate searcher T2 table, as it wasn't allocated before */
8310 bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ);
8315 /* write address to which L5 should insert its values */
8316 bp->cnic_eth_dev.addr_drv_info_to_mcp =
8317 &bp->slowpath->drv_info_to_mcp;
8319 if (bnx2x_ilt_mem_op_cnic(bp, ILT_MEMOP_ALLOC))
8325 bnx2x_free_mem_cnic(bp);
8326 BNX2X_ERR("Can't allocate memory\n");
8330 int bnx2x_alloc_mem(struct bnx2x *bp)
8332 int i, allocated, context_size;
8334 if (!CONFIGURE_NIC_MODE(bp) && !bp->t2) {
8335 /* allocate searcher T2 table */
8336 bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ);
8341 bp->def_status_blk = BNX2X_PCI_ALLOC(&bp->def_status_blk_mapping,
8342 sizeof(struct host_sp_status_block));
8343 if (!bp->def_status_blk)
8346 bp->slowpath = BNX2X_PCI_ALLOC(&bp->slowpath_mapping,
8347 sizeof(struct bnx2x_slowpath));
8351 /* Allocate memory for CDU context:
8352 * This memory is allocated separately and not in the generic ILT
8353 * functions because CDU differs in few aspects:
8354 * 1. There are multiple entities allocating memory for context -
8355 * 'regular' driver, CNIC and SRIOV driver. Each separately controls
8356 * its own ILT lines.
8357 * 2. Since CDU page-size is not a single 4KB page (which is the case
8358 * for the other ILT clients), to be efficient we want to support
8359 * allocation of sub-page-size in the last entry.
8360 * 3. Context pointers are used by the driver to pass to FW / update
8361 * the context (for the other ILT clients the pointers are used just to
8362 * free the memory during unload).
8364 context_size = sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(bp);
8366 for (i = 0, allocated = 0; allocated < context_size; i++) {
8367 bp->context[i].size = min(CDU_ILT_PAGE_SZ,
8368 (context_size - allocated));
8369 bp->context[i].vcxt = BNX2X_PCI_ALLOC(&bp->context[i].cxt_mapping,
8370 bp->context[i].size);
8371 if (!bp->context[i].vcxt)
8373 allocated += bp->context[i].size;
8375 bp->ilt->lines = kcalloc(ILT_MAX_LINES, sizeof(struct ilt_line),
8377 if (!bp->ilt->lines)
8380 if (bnx2x_ilt_mem_op(bp, ILT_MEMOP_ALLOC))
8383 if (bnx2x_iov_alloc_mem(bp))
8386 /* Slow path ring */
8387 bp->spq = BNX2X_PCI_ALLOC(&bp->spq_mapping, BCM_PAGE_SIZE);
8392 bp->eq_ring = BNX2X_PCI_ALLOC(&bp->eq_mapping,
8393 BCM_PAGE_SIZE * NUM_EQ_PAGES);
8401 BNX2X_ERR("Can't allocate memory\n");
8406 * Init service functions
8409 int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac,
8410 struct bnx2x_vlan_mac_obj *obj, bool set,
8411 int mac_type, unsigned long *ramrod_flags)
8414 struct bnx2x_vlan_mac_ramrod_params ramrod_param;
8416 memset(&ramrod_param, 0, sizeof(ramrod_param));
8418 /* Fill general parameters */
8419 ramrod_param.vlan_mac_obj = obj;
8420 ramrod_param.ramrod_flags = *ramrod_flags;
8422 /* Fill a user request section if needed */
8423 if (!test_bit(RAMROD_CONT, ramrod_flags)) {
8424 memcpy(ramrod_param.user_req.u.mac.mac, mac, ETH_ALEN);
8426 __set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags);
8428 /* Set the command: ADD or DEL */
8430 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
8432 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL;
8435 rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
8437 if (rc == -EEXIST) {
8438 DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc);
8439 /* do not treat adding same MAC as error */
8442 BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del"));
8447 int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan,
8448 struct bnx2x_vlan_mac_obj *obj, bool set,
8449 unsigned long *ramrod_flags)
8452 struct bnx2x_vlan_mac_ramrod_params ramrod_param;
8454 memset(&ramrod_param, 0, sizeof(ramrod_param));
8456 /* Fill general parameters */
8457 ramrod_param.vlan_mac_obj = obj;
8458 ramrod_param.ramrod_flags = *ramrod_flags;
8460 /* Fill a user request section if needed */
8461 if (!test_bit(RAMROD_CONT, ramrod_flags)) {
8462 ramrod_param.user_req.u.vlan.vlan = vlan;
8463 /* Set the command: ADD or DEL */
8465 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
8467 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL;
8470 rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
8472 if (rc == -EEXIST) {
8473 /* Do not treat adding same vlan as error. */
8474 DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc);
8476 } else if (rc < 0) {
8477 BNX2X_ERR("%s VLAN failed\n", (set ? "Set" : "Del"));
8483 int bnx2x_del_all_macs(struct bnx2x *bp,
8484 struct bnx2x_vlan_mac_obj *mac_obj,
8485 int mac_type, bool wait_for_comp)
8488 unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
8490 /* Wait for completion of requested */
8492 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
8494 /* Set the mac type of addresses we want to clear */
8495 __set_bit(mac_type, &vlan_mac_flags);
8497 rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags, &ramrod_flags);
8499 BNX2X_ERR("Failed to delete MACs: %d\n", rc);
8504 int bnx2x_set_eth_mac(struct bnx2x *bp, bool set)
8507 unsigned long ramrod_flags = 0;
8509 DP(NETIF_MSG_IFUP, "Adding Eth MAC\n");
8510 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
8511 return bnx2x_set_mac_one(bp, bp->dev->dev_addr,
8512 &bp->sp_objs->mac_obj, set,
8513 BNX2X_ETH_MAC, &ramrod_flags);
8515 return bnx2x_vfpf_config_mac(bp, bp->dev->dev_addr,
8516 bp->fp->index, set);
8520 int bnx2x_setup_leading(struct bnx2x *bp)
8523 return bnx2x_setup_queue(bp, &bp->fp[0], true);
8525 return bnx2x_vfpf_setup_q(bp, &bp->fp[0], true);
8529 * bnx2x_set_int_mode - configure interrupt mode
8531 * @bp: driver handle
8533 * In case of MSI-X it will also try to enable MSI-X.
8535 int bnx2x_set_int_mode(struct bnx2x *bp)
8539 if (IS_VF(bp) && int_mode != BNX2X_INT_MODE_MSIX) {
8540 BNX2X_ERR("VF not loaded since interrupt mode not msix\n");
8545 case BNX2X_INT_MODE_MSIX:
8546 /* attempt to enable msix */
8547 rc = bnx2x_enable_msix(bp);
8553 /* vfs use only msix */
8554 if (rc && IS_VF(bp))
8557 /* failed to enable multiple MSI-X */
8558 BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n",
8560 1 + bp->num_cnic_queues);
8562 /* falling through... */
8563 case BNX2X_INT_MODE_MSI:
8564 bnx2x_enable_msi(bp);
8566 /* falling through... */
8567 case BNX2X_INT_MODE_INTX:
8568 bp->num_ethernet_queues = 1;
8569 bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
8570 BNX2X_DEV_INFO("set number of queues to 1\n");
8573 BNX2X_DEV_INFO("unknown value in int_mode module parameter\n");
8579 /* must be called prior to any HW initializations */
8580 static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp)
8583 return (BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS)/ILT_PAGE_CIDS;
8584 return L2_ILT_LINES(bp);
8587 void bnx2x_ilt_set_info(struct bnx2x *bp)
8589 struct ilt_client_info *ilt_client;
8590 struct bnx2x_ilt *ilt = BP_ILT(bp);
8593 ilt->start_line = FUNC_ILT_BASE(BP_FUNC(bp));
8594 DP(BNX2X_MSG_SP, "ilt starts at line %d\n", ilt->start_line);
8597 ilt_client = &ilt->clients[ILT_CLIENT_CDU];
8598 ilt_client->client_num = ILT_CLIENT_CDU;
8599 ilt_client->page_size = CDU_ILT_PAGE_SZ;
8600 ilt_client->flags = ILT_CLIENT_SKIP_MEM;
8601 ilt_client->start = line;
8602 line += bnx2x_cid_ilt_lines(bp);
8604 if (CNIC_SUPPORT(bp))
8605 line += CNIC_ILT_LINES;
8606 ilt_client->end = line - 1;
8608 DP(NETIF_MSG_IFUP, "ilt client[CDU]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8611 ilt_client->page_size,
8613 ilog2(ilt_client->page_size >> 12));
8616 if (QM_INIT(bp->qm_cid_count)) {
8617 ilt_client = &ilt->clients[ILT_CLIENT_QM];
8618 ilt_client->client_num = ILT_CLIENT_QM;
8619 ilt_client->page_size = QM_ILT_PAGE_SZ;
8620 ilt_client->flags = 0;
8621 ilt_client->start = line;
8623 /* 4 bytes for each cid */
8624 line += DIV_ROUND_UP(bp->qm_cid_count * QM_QUEUES_PER_FUNC * 4,
8627 ilt_client->end = line - 1;
8630 "ilt client[QM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8633 ilt_client->page_size,
8635 ilog2(ilt_client->page_size >> 12));
8638 if (CNIC_SUPPORT(bp)) {
8640 ilt_client = &ilt->clients[ILT_CLIENT_SRC];
8641 ilt_client->client_num = ILT_CLIENT_SRC;
8642 ilt_client->page_size = SRC_ILT_PAGE_SZ;
8643 ilt_client->flags = 0;
8644 ilt_client->start = line;
8645 line += SRC_ILT_LINES;
8646 ilt_client->end = line - 1;
8649 "ilt client[SRC]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8652 ilt_client->page_size,
8654 ilog2(ilt_client->page_size >> 12));
8657 ilt_client = &ilt->clients[ILT_CLIENT_TM];
8658 ilt_client->client_num = ILT_CLIENT_TM;
8659 ilt_client->page_size = TM_ILT_PAGE_SZ;
8660 ilt_client->flags = 0;
8661 ilt_client->start = line;
8662 line += TM_ILT_LINES;
8663 ilt_client->end = line - 1;
8666 "ilt client[TM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8669 ilt_client->page_size,
8671 ilog2(ilt_client->page_size >> 12));
8674 BUG_ON(line > ILT_MAX_LINES);
8678 * bnx2x_pf_q_prep_init - prepare INIT transition parameters
8680 * @bp: driver handle
8681 * @fp: pointer to fastpath
8682 * @init_params: pointer to parameters structure
8684 * parameters configured:
8685 * - HC configuration
8686 * - Queue's CDU context
8688 static void bnx2x_pf_q_prep_init(struct bnx2x *bp,
8689 struct bnx2x_fastpath *fp, struct bnx2x_queue_init_params *init_params)
8692 int cxt_index, cxt_offset;
8694 /* FCoE Queue uses Default SB, thus has no HC capabilities */
8695 if (!IS_FCOE_FP(fp)) {
8696 __set_bit(BNX2X_Q_FLG_HC, &init_params->rx.flags);
8697 __set_bit(BNX2X_Q_FLG_HC, &init_params->tx.flags);
8699 /* If HC is supported, enable host coalescing in the transition
8702 __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->rx.flags);
8703 __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->tx.flags);
8706 init_params->rx.hc_rate = bp->rx_ticks ?
8707 (1000000 / bp->rx_ticks) : 0;
8708 init_params->tx.hc_rate = bp->tx_ticks ?
8709 (1000000 / bp->tx_ticks) : 0;
8712 init_params->rx.fw_sb_id = init_params->tx.fw_sb_id =
8716 * CQ index among the SB indices: FCoE clients uses the default
8717 * SB, therefore it's different.
8719 init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
8720 init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS;
8723 /* set maximum number of COSs supported by this queue */
8724 init_params->max_cos = fp->max_cos;
8726 DP(NETIF_MSG_IFUP, "fp: %d setting queue params max cos to: %d\n",
8727 fp->index, init_params->max_cos);
8729 /* set the context pointers queue object */
8730 for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) {
8731 cxt_index = fp->txdata_ptr[cos]->cid / ILT_PAGE_CIDS;
8732 cxt_offset = fp->txdata_ptr[cos]->cid - (cxt_index *
8734 init_params->cxts[cos] =
8735 &bp->context[cxt_index].vcxt[cxt_offset].eth;
8739 static int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp,
8740 struct bnx2x_queue_state_params *q_params,
8741 struct bnx2x_queue_setup_tx_only_params *tx_only_params,
8742 int tx_index, bool leading)
8744 memset(tx_only_params, 0, sizeof(*tx_only_params));
8746 /* Set the command */
8747 q_params->cmd = BNX2X_Q_CMD_SETUP_TX_ONLY;
8749 /* Set tx-only QUEUE flags: don't zero statistics */
8750 tx_only_params->flags = bnx2x_get_common_flags(bp, fp, false);
8752 /* choose the index of the cid to send the slow path on */
8753 tx_only_params->cid_index = tx_index;
8755 /* Set general TX_ONLY_SETUP parameters */
8756 bnx2x_pf_q_prep_general(bp, fp, &tx_only_params->gen_params, tx_index);
8758 /* Set Tx TX_ONLY_SETUP parameters */
8759 bnx2x_pf_tx_q_prep(bp, fp, &tx_only_params->txq_params, tx_index);
8762 "preparing to send tx-only ramrod for connection: cos %d, primary cid %d, cid %d, client id %d, sp-client id %d, flags %lx\n",
8763 tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX],
8764 q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id,
8765 tx_only_params->gen_params.spcl_id, tx_only_params->flags);
8767 /* send the ramrod */
8768 return bnx2x_queue_state_change(bp, q_params);
8772 * bnx2x_setup_queue - setup queue
8774 * @bp: driver handle
8775 * @fp: pointer to fastpath
8776 * @leading: is leading
8778 * This function performs 2 steps in a Queue state machine
8779 * actually: 1) RESET->INIT 2) INIT->SETUP
8782 int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
8785 struct bnx2x_queue_state_params q_params = {NULL};
8786 struct bnx2x_queue_setup_params *setup_params =
8787 &q_params.params.setup;
8788 struct bnx2x_queue_setup_tx_only_params *tx_only_params =
8789 &q_params.params.tx_only;
8793 DP(NETIF_MSG_IFUP, "setting up queue %d\n", fp->index);
8795 /* reset IGU state skip FCoE L2 queue */
8796 if (!IS_FCOE_FP(fp))
8797 bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0,
8800 q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
8801 /* We want to wait for completion in this context */
8802 __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
8804 /* Prepare the INIT parameters */
8805 bnx2x_pf_q_prep_init(bp, fp, &q_params.params.init);
8807 /* Set the command */
8808 q_params.cmd = BNX2X_Q_CMD_INIT;
8810 /* Change the state to INIT */
8811 rc = bnx2x_queue_state_change(bp, &q_params);
8813 BNX2X_ERR("Queue(%d) INIT failed\n", fp->index);
8817 DP(NETIF_MSG_IFUP, "init complete\n");
8819 /* Now move the Queue to the SETUP state... */
8820 memset(setup_params, 0, sizeof(*setup_params));
8822 /* Set QUEUE flags */
8823 setup_params->flags = bnx2x_get_q_flags(bp, fp, leading);
8825 /* Set general SETUP parameters */
8826 bnx2x_pf_q_prep_general(bp, fp, &setup_params->gen_params,
8827 FIRST_TX_COS_INDEX);
8829 bnx2x_pf_rx_q_prep(bp, fp, &setup_params->pause_params,
8830 &setup_params->rxq_params);
8832 bnx2x_pf_tx_q_prep(bp, fp, &setup_params->txq_params,
8833 FIRST_TX_COS_INDEX);
8835 /* Set the command */
8836 q_params.cmd = BNX2X_Q_CMD_SETUP;
8839 bp->fcoe_init = true;
8841 /* Change the state to SETUP */
8842 rc = bnx2x_queue_state_change(bp, &q_params);
8844 BNX2X_ERR("Queue(%d) SETUP failed\n", fp->index);
8848 /* loop through the relevant tx-only indices */
8849 for (tx_index = FIRST_TX_ONLY_COS_INDEX;
8850 tx_index < fp->max_cos;
8853 /* prepare and send tx-only ramrod*/
8854 rc = bnx2x_setup_tx_only(bp, fp, &q_params,
8855 tx_only_params, tx_index, leading);
8857 BNX2X_ERR("Queue(%d.%d) TX_ONLY_SETUP failed\n",
8858 fp->index, tx_index);
8866 static int bnx2x_stop_queue(struct bnx2x *bp, int index)
8868 struct bnx2x_fastpath *fp = &bp->fp[index];
8869 struct bnx2x_fp_txdata *txdata;
8870 struct bnx2x_queue_state_params q_params = {NULL};
8873 DP(NETIF_MSG_IFDOWN, "stopping queue %d cid %d\n", index, fp->cid);
8875 q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
8876 /* We want to wait for completion in this context */
8877 __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
8879 /* close tx-only connections */
8880 for (tx_index = FIRST_TX_ONLY_COS_INDEX;
8881 tx_index < fp->max_cos;
8884 /* ascertain this is a normal queue*/
8885 txdata = fp->txdata_ptr[tx_index];
8887 DP(NETIF_MSG_IFDOWN, "stopping tx-only queue %d\n",
8890 /* send halt terminate on tx-only connection */
8891 q_params.cmd = BNX2X_Q_CMD_TERMINATE;
8892 memset(&q_params.params.terminate, 0,
8893 sizeof(q_params.params.terminate));
8894 q_params.params.terminate.cid_index = tx_index;
8896 rc = bnx2x_queue_state_change(bp, &q_params);
8900 /* send halt terminate on tx-only connection */
8901 q_params.cmd = BNX2X_Q_CMD_CFC_DEL;
8902 memset(&q_params.params.cfc_del, 0,
8903 sizeof(q_params.params.cfc_del));
8904 q_params.params.cfc_del.cid_index = tx_index;
8905 rc = bnx2x_queue_state_change(bp, &q_params);
8909 /* Stop the primary connection: */
8910 /* ...halt the connection */
8911 q_params.cmd = BNX2X_Q_CMD_HALT;
8912 rc = bnx2x_queue_state_change(bp, &q_params);
8916 /* ...terminate the connection */
8917 q_params.cmd = BNX2X_Q_CMD_TERMINATE;
8918 memset(&q_params.params.terminate, 0,
8919 sizeof(q_params.params.terminate));
8920 q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX;
8921 rc = bnx2x_queue_state_change(bp, &q_params);
8924 /* ...delete cfc entry */
8925 q_params.cmd = BNX2X_Q_CMD_CFC_DEL;
8926 memset(&q_params.params.cfc_del, 0,
8927 sizeof(q_params.params.cfc_del));
8928 q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX;
8929 return bnx2x_queue_state_change(bp, &q_params);
8932 static void bnx2x_reset_func(struct bnx2x *bp)
8934 int port = BP_PORT(bp);
8935 int func = BP_FUNC(bp);
8938 /* Disable the function in the FW */
8939 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0);
8940 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0);
8941 REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0);
8942 REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0);
8945 for_each_eth_queue(bp, i) {
8946 struct bnx2x_fastpath *fp = &bp->fp[i];
8947 REG_WR8(bp, BAR_CSTRORM_INTMEM +
8948 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id),
8952 if (CNIC_LOADED(bp))
8954 REG_WR8(bp, BAR_CSTRORM_INTMEM +
8955 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET
8956 (bnx2x_cnic_fw_sb_id(bp)), SB_DISABLED);
8959 REG_WR8(bp, BAR_CSTRORM_INTMEM +
8960 CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func),
8963 for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++)
8964 REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func),
8968 if (bp->common.int_block == INT_BLOCK_HC) {
8969 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
8970 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
8972 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0);
8973 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0);
8976 if (CNIC_LOADED(bp)) {
8977 /* Disable Timer scan */
8978 REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0);
8980 * Wait for at least 10ms and up to 2 second for the timers
8983 for (i = 0; i < 200; i++) {
8984 usleep_range(10000, 20000);
8985 if (!REG_RD(bp, TM_REG_LIN0_SCAN_ON + port*4))
8990 bnx2x_clear_func_ilt(bp, func);
8992 /* Timers workaround bug for E2: if this is vnic-3,
8993 * we need to set the entire ilt range for this timers.
8995 if (!CHIP_IS_E1x(bp) && BP_VN(bp) == 3) {
8996 struct ilt_client_info ilt_cli;
8997 /* use dummy TM client */
8998 memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
9000 ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
9001 ilt_cli.client_num = ILT_CLIENT_TM;
9003 bnx2x_ilt_boundry_init_op(bp, &ilt_cli, 0, INITOP_CLEAR);
9006 /* this assumes that reset_port() called before reset_func()*/
9007 if (!CHIP_IS_E1x(bp))
9008 bnx2x_pf_disable(bp);
9013 static void bnx2x_reset_port(struct bnx2x *bp)
9015 int port = BP_PORT(bp);
9018 /* Reset physical Link */
9019 bnx2x__link_reset(bp);
9021 REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
9023 /* Do not rcv packets to BRB */
9024 REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK + port*4, 0x0);
9025 /* Do not direct rcv packets that are not for MCP to the BRB */
9026 REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
9027 NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
9030 REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, 0);
9033 /* Check for BRB port occupancy */
9034 val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4);
9036 DP(NETIF_MSG_IFDOWN,
9037 "BRB1 is not empty %d blocks are occupied\n", val);
9039 /* TODO: Close Doorbell port? */
9042 static int bnx2x_reset_hw(struct bnx2x *bp, u32 load_code)
9044 struct bnx2x_func_state_params func_params = {NULL};
9046 /* Prepare parameters for function state transitions */
9047 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
9049 func_params.f_obj = &bp->func_obj;
9050 func_params.cmd = BNX2X_F_CMD_HW_RESET;
9052 func_params.params.hw_init.load_phase = load_code;
9054 return bnx2x_func_state_change(bp, &func_params);
9057 static int bnx2x_func_stop(struct bnx2x *bp)
9059 struct bnx2x_func_state_params func_params = {NULL};
9062 /* Prepare parameters for function state transitions */
9063 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
9064 func_params.f_obj = &bp->func_obj;
9065 func_params.cmd = BNX2X_F_CMD_STOP;
9068 * Try to stop the function the 'good way'. If fails (in case
9069 * of a parity error during bnx2x_chip_cleanup()) and we are
9070 * not in a debug mode, perform a state transaction in order to
9071 * enable further HW_RESET transaction.
9073 rc = bnx2x_func_state_change(bp, &func_params);
9075 #ifdef BNX2X_STOP_ON_ERROR
9078 BNX2X_ERR("FUNC_STOP ramrod failed. Running a dry transaction\n");
9079 __set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
9080 return bnx2x_func_state_change(bp, &func_params);
9088 * bnx2x_send_unload_req - request unload mode from the MCP.
9090 * @bp: driver handle
9091 * @unload_mode: requested function's unload mode
9093 * Return unload mode returned by the MCP: COMMON, PORT or FUNC.
9095 u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode)
9098 int port = BP_PORT(bp);
9100 /* Select the UNLOAD request mode */
9101 if (unload_mode == UNLOAD_NORMAL)
9102 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
9104 else if (bp->flags & NO_WOL_FLAG)
9105 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
9108 u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
9109 u8 *mac_addr = bp->dev->dev_addr;
9110 struct pci_dev *pdev = bp->pdev;
9114 /* The mac address is written to entries 1-4 to
9115 * preserve entry 0 which is used by the PMF
9117 u8 entry = (BP_VN(bp) + 1)*8;
9119 val = (mac_addr[0] << 8) | mac_addr[1];
9120 EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
9122 val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
9123 (mac_addr[4] << 8) | mac_addr[5];
9124 EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
9126 /* Enable the PME and clear the status */
9127 pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &pmc);
9128 pmc |= PCI_PM_CTRL_PME_ENABLE | PCI_PM_CTRL_PME_STATUS;
9129 pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, pmc);
9131 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
9134 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
9136 /* Send the request to the MCP */
9138 reset_code = bnx2x_fw_command(bp, reset_code, 0);
9140 int path = BP_PATH(bp);
9142 DP(NETIF_MSG_IFDOWN, "NO MCP - load counts[%d] %d, %d, %d\n",
9143 path, bnx2x_load_count[path][0], bnx2x_load_count[path][1],
9144 bnx2x_load_count[path][2]);
9145 bnx2x_load_count[path][0]--;
9146 bnx2x_load_count[path][1 + port]--;
9147 DP(NETIF_MSG_IFDOWN, "NO MCP - new load counts[%d] %d, %d, %d\n",
9148 path, bnx2x_load_count[path][0], bnx2x_load_count[path][1],
9149 bnx2x_load_count[path][2]);
9150 if (bnx2x_load_count[path][0] == 0)
9151 reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
9152 else if (bnx2x_load_count[path][1 + port] == 0)
9153 reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT;
9155 reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
9162 * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP.
9164 * @bp: driver handle
9165 * @keep_link: true iff link should be kept up
9167 void bnx2x_send_unload_done(struct bnx2x *bp, bool keep_link)
9169 u32 reset_param = keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0;
9171 /* Report UNLOAD_DONE to MCP */
9173 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, reset_param);
9176 static int bnx2x_func_wait_started(struct bnx2x *bp)
9179 int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
9185 * (assumption: No Attention from MCP at this stage)
9186 * PMF probably in the middle of TX disable/enable transaction
9187 * 1. Sync IRS for default SB
9188 * 2. Sync SP queue - this guarantees us that attention handling started
9189 * 3. Wait, that TX disable/enable transaction completes
9191 * 1+2 guarantee that if DCBx attention was scheduled it already changed
9192 * pending bit of transaction from STARTED-->TX_STOPPED, if we already
9193 * received completion for the transaction the state is TX_STOPPED.
9194 * State will return to STARTED after completion of TX_STOPPED-->STARTED
9198 /* make sure default SB ISR is done */
9200 synchronize_irq(bp->msix_table[0].vector);
9202 synchronize_irq(bp->pdev->irq);
9204 flush_workqueue(bnx2x_wq);
9205 flush_workqueue(bnx2x_iov_wq);
9207 while (bnx2x_func_get_state(bp, &bp->func_obj) !=
9208 BNX2X_F_STATE_STARTED && tout--)
9211 if (bnx2x_func_get_state(bp, &bp->func_obj) !=
9212 BNX2X_F_STATE_STARTED) {
9213 #ifdef BNX2X_STOP_ON_ERROR
9214 BNX2X_ERR("Wrong function state\n");
9218 * Failed to complete the transaction in a "good way"
9219 * Force both transactions with CLR bit
9221 struct bnx2x_func_state_params func_params = {NULL};
9223 DP(NETIF_MSG_IFDOWN,
9224 "Hmmm... Unexpected function state! Forcing STARTED-->TX_STOPPED-->STARTED\n");
9226 func_params.f_obj = &bp->func_obj;
9227 __set_bit(RAMROD_DRV_CLR_ONLY,
9228 &func_params.ramrod_flags);
9230 /* STARTED-->TX_ST0PPED */
9231 func_params.cmd = BNX2X_F_CMD_TX_STOP;
9232 bnx2x_func_state_change(bp, &func_params);
9234 /* TX_ST0PPED-->STARTED */
9235 func_params.cmd = BNX2X_F_CMD_TX_START;
9236 return bnx2x_func_state_change(bp, &func_params);
9243 static void bnx2x_disable_ptp(struct bnx2x *bp)
9245 int port = BP_PORT(bp);
9247 /* Disable sending PTP packets to host */
9248 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST :
9249 NIG_REG_P0_LLH_PTP_TO_HOST, 0x0);
9251 /* Reset PTP event detection rules */
9252 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK :
9253 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF);
9254 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK :
9255 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF);
9256 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK :
9257 NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF);
9258 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK :
9259 NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF);
9261 /* Disable the PTP feature */
9262 REG_WR(bp, port ? NIG_REG_P1_PTP_EN :
9263 NIG_REG_P0_PTP_EN, 0x0);
9266 /* Called during unload, to stop PTP-related stuff */
9267 static void bnx2x_stop_ptp(struct bnx2x *bp)
9269 /* Cancel PTP work queue. Should be done after the Tx queues are
9270 * drained to prevent additional scheduling.
9272 cancel_work_sync(&bp->ptp_task);
9274 if (bp->ptp_tx_skb) {
9275 dev_kfree_skb_any(bp->ptp_tx_skb);
9276 bp->ptp_tx_skb = NULL;
9279 /* Disable PTP in HW */
9280 bnx2x_disable_ptp(bp);
9282 DP(BNX2X_MSG_PTP, "PTP stop ended successfully\n");
9285 void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link)
9287 int port = BP_PORT(bp);
9290 struct bnx2x_mcast_ramrod_params rparam = {NULL};
9293 /* Wait until tx fastpath tasks complete */
9294 for_each_tx_queue(bp, i) {
9295 struct bnx2x_fastpath *fp = &bp->fp[i];
9297 for_each_cos_in_tx_queue(fp, cos)
9298 rc = bnx2x_clean_tx_queue(bp, fp->txdata_ptr[cos]);
9299 #ifdef BNX2X_STOP_ON_ERROR
9305 /* Give HW time to discard old tx messages */
9306 usleep_range(1000, 2000);
9308 /* Clean all ETH MACs */
9309 rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_ETH_MAC,
9312 BNX2X_ERR("Failed to delete all ETH macs: %d\n", rc);
9314 /* Clean up UC list */
9315 rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_UC_LIST_MAC,
9318 BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n",
9322 if (!CHIP_IS_E1(bp))
9323 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
9325 /* Set "drop all" (stop Rx).
9326 * We need to take a netif_addr_lock() here in order to prevent
9327 * a race between the completion code and this code.
9329 netif_addr_lock_bh(bp->dev);
9330 /* Schedule the rx_mode command */
9331 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state))
9332 set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state);
9334 bnx2x_set_storm_rx_mode(bp);
9336 /* Cleanup multicast configuration */
9337 rparam.mcast_obj = &bp->mcast_obj;
9338 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
9340 BNX2X_ERR("Failed to send DEL multicast command: %d\n", rc);
9342 netif_addr_unlock_bh(bp->dev);
9344 bnx2x_iov_chip_cleanup(bp);
9347 * Send the UNLOAD_REQUEST to the MCP. This will return if
9348 * this function should perform FUNC, PORT or COMMON HW
9351 reset_code = bnx2x_send_unload_req(bp, unload_mode);
9354 * (assumption: No Attention from MCP at this stage)
9355 * PMF probably in the middle of TX disable/enable transaction
9357 rc = bnx2x_func_wait_started(bp);
9359 BNX2X_ERR("bnx2x_func_wait_started failed\n");
9360 #ifdef BNX2X_STOP_ON_ERROR
9365 /* Close multi and leading connections
9366 * Completions for ramrods are collected in a synchronous way
9368 for_each_eth_queue(bp, i)
9369 if (bnx2x_stop_queue(bp, i))
9370 #ifdef BNX2X_STOP_ON_ERROR
9376 if (CNIC_LOADED(bp)) {
9377 for_each_cnic_queue(bp, i)
9378 if (bnx2x_stop_queue(bp, i))
9379 #ifdef BNX2X_STOP_ON_ERROR
9386 /* If SP settings didn't get completed so far - something
9387 * very wrong has happen.
9389 if (!bnx2x_wait_sp_comp(bp, ~0x0UL))
9390 BNX2X_ERR("Hmmm... Common slow path ramrods got stuck!\n");
9392 #ifndef BNX2X_STOP_ON_ERROR
9395 rc = bnx2x_func_stop(bp);
9397 BNX2X_ERR("Function stop failed!\n");
9398 #ifdef BNX2X_STOP_ON_ERROR
9403 /* stop_ptp should be after the Tx queues are drained to prevent
9404 * scheduling to the cancelled PTP work queue. It should also be after
9405 * function stop ramrod is sent, since as part of this ramrod FW access
9408 if (bp->flags & PTP_SUPPORTED)
9411 /* Disable HW interrupts, NAPI */
9412 bnx2x_netif_stop(bp, 1);
9413 /* Delete all NAPI objects */
9414 bnx2x_del_all_napi(bp);
9415 if (CNIC_LOADED(bp))
9416 bnx2x_del_all_napi_cnic(bp);
9421 /* Reset the chip */
9422 rc = bnx2x_reset_hw(bp, reset_code);
9424 BNX2X_ERR("HW_RESET failed\n");
9426 /* Report UNLOAD_DONE to MCP */
9427 bnx2x_send_unload_done(bp, keep_link);
9430 void bnx2x_disable_close_the_gate(struct bnx2x *bp)
9434 DP(NETIF_MSG_IFDOWN, "Disabling \"close the gates\"\n");
9436 if (CHIP_IS_E1(bp)) {
9437 int port = BP_PORT(bp);
9438 u32 addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
9439 MISC_REG_AEU_MASK_ATTN_FUNC_0;
9441 val = REG_RD(bp, addr);
9443 REG_WR(bp, addr, val);
9445 val = REG_RD(bp, MISC_REG_AEU_GENERAL_MASK);
9446 val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK |
9447 MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK);
9448 REG_WR(bp, MISC_REG_AEU_GENERAL_MASK, val);
9452 /* Close gates #2, #3 and #4: */
9453 static void bnx2x_set_234_gates(struct bnx2x *bp, bool close)
9457 /* Gates #2 and #4a are closed/opened for "not E1" only */
9458 if (!CHIP_IS_E1(bp)) {
9460 REG_WR(bp, PXP_REG_HST_DISCARD_DOORBELLS, !!close);
9462 REG_WR(bp, PXP_REG_HST_DISCARD_INTERNAL_WRITES, !!close);
9466 if (CHIP_IS_E1x(bp)) {
9467 /* Prevent interrupts from HC on both ports */
9468 val = REG_RD(bp, HC_REG_CONFIG_1);
9469 REG_WR(bp, HC_REG_CONFIG_1,
9470 (!close) ? (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1) :
9471 (val & ~(u32)HC_CONFIG_1_REG_BLOCK_DISABLE_1));
9473 val = REG_RD(bp, HC_REG_CONFIG_0);
9474 REG_WR(bp, HC_REG_CONFIG_0,
9475 (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) :
9476 (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0));
9478 /* Prevent incoming interrupts in IGU */
9479 val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
9481 REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION,
9483 (val | IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE) :
9484 (val & ~(u32)IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
9487 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "%s gates #2, #3 and #4\n",
9488 close ? "closing" : "opening");
9492 #define SHARED_MF_CLP_MAGIC 0x80000000 /* `magic' bit */
9494 static void bnx2x_clp_reset_prep(struct bnx2x *bp, u32 *magic_val)
9496 /* Do some magic... */
9497 u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb);
9498 *magic_val = val & SHARED_MF_CLP_MAGIC;
9499 MF_CFG_WR(bp, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
9503 * bnx2x_clp_reset_done - restore the value of the `magic' bit.
9505 * @bp: driver handle
9506 * @magic_val: old value of the `magic' bit.
9508 static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val)
9510 /* Restore the `magic' bit value... */
9511 u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb);
9512 MF_CFG_WR(bp, shared_mf_config.clp_mb,
9513 (val & (~SHARED_MF_CLP_MAGIC)) | magic_val);
9517 * bnx2x_reset_mcp_prep - prepare for MCP reset.
9519 * @bp: driver handle
9520 * @magic_val: old value of 'magic' bit.
9522 * Takes care of CLP configurations.
9524 static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val)
9527 u32 validity_offset;
9529 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "Starting\n");
9531 /* Set `magic' bit in order to save MF config */
9532 if (!CHIP_IS_E1(bp))
9533 bnx2x_clp_reset_prep(bp, magic_val);
9535 /* Get shmem offset */
9536 shmem = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
9538 offsetof(struct shmem_region, validity_map[BP_PORT(bp)]);
9540 /* Clear validity map flags */
9542 REG_WR(bp, shmem + validity_offset, 0);
9545 #define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */
9546 #define MCP_ONE_TIMEOUT 100 /* 100 ms */
9549 * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT
9551 * @bp: driver handle
9553 static void bnx2x_mcp_wait_one(struct bnx2x *bp)
9555 /* special handling for emulation and FPGA,
9556 wait 10 times longer */
9557 if (CHIP_REV_IS_SLOW(bp))
9558 msleep(MCP_ONE_TIMEOUT*10);
9560 msleep(MCP_ONE_TIMEOUT);
9564 * initializes bp->common.shmem_base and waits for validity signature to appear
9566 static int bnx2x_init_shmem(struct bnx2x *bp)
9572 bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
9573 if (bp->common.shmem_base) {
9574 val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]);
9575 if (val & SHR_MEM_VALIDITY_MB)
9579 bnx2x_mcp_wait_one(bp);
9581 } while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT));
9583 BNX2X_ERR("BAD MCP validity signature\n");
9588 static int bnx2x_reset_mcp_comp(struct bnx2x *bp, u32 magic_val)
9590 int rc = bnx2x_init_shmem(bp);
9592 /* Restore the `magic' bit value */
9593 if (!CHIP_IS_E1(bp))
9594 bnx2x_clp_reset_done(bp, magic_val);
9599 static void bnx2x_pxp_prep(struct bnx2x *bp)
9601 if (!CHIP_IS_E1(bp)) {
9602 REG_WR(bp, PXP2_REG_RD_START_INIT, 0);
9603 REG_WR(bp, PXP2_REG_RQ_RBC_DONE, 0);
9609 * Reset the whole chip except for:
9611 * - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by
9614 * - MISC (including AEU)
9618 static void bnx2x_process_kill_chip_reset(struct bnx2x *bp, bool global)
9620 u32 not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2;
9621 u32 global_bits2, stay_reset2;
9624 * Bits that have to be set in reset_mask2 if we want to reset 'global'
9625 * (per chip) blocks.
9628 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU |
9629 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE;
9631 /* Don't reset the following blocks.
9632 * Important: per port blocks (such as EMAC, BMAC, UMAC) can't be
9633 * reset, as in 4 port device they might still be owned
9634 * by the MCP (there is only one leader per path).
9637 MISC_REGISTERS_RESET_REG_1_RST_HC |
9638 MISC_REGISTERS_RESET_REG_1_RST_PXPV |
9639 MISC_REGISTERS_RESET_REG_1_RST_PXP;
9642 MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO |
9643 MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE |
9644 MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE |
9645 MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE |
9646 MISC_REGISTERS_RESET_REG_2_RST_RBCN |
9647 MISC_REGISTERS_RESET_REG_2_RST_GRC |
9648 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE |
9649 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B |
9650 MISC_REGISTERS_RESET_REG_2_RST_ATC |
9651 MISC_REGISTERS_RESET_REG_2_PGLC |
9652 MISC_REGISTERS_RESET_REG_2_RST_BMAC0 |
9653 MISC_REGISTERS_RESET_REG_2_RST_BMAC1 |
9654 MISC_REGISTERS_RESET_REG_2_RST_EMAC0 |
9655 MISC_REGISTERS_RESET_REG_2_RST_EMAC1 |
9656 MISC_REGISTERS_RESET_REG_2_UMAC0 |
9657 MISC_REGISTERS_RESET_REG_2_UMAC1;
9660 * Keep the following blocks in reset:
9661 * - all xxMACs are handled by the bnx2x_link code.
9664 MISC_REGISTERS_RESET_REG_2_XMAC |
9665 MISC_REGISTERS_RESET_REG_2_XMAC_SOFT;
9667 /* Full reset masks according to the chip */
9668 reset_mask1 = 0xffffffff;
9671 reset_mask2 = 0xffff;
9672 else if (CHIP_IS_E1H(bp))
9673 reset_mask2 = 0x1ffff;
9674 else if (CHIP_IS_E2(bp))
9675 reset_mask2 = 0xfffff;
9676 else /* CHIP_IS_E3 */
9677 reset_mask2 = 0x3ffffff;
9679 /* Don't reset global blocks unless we need to */
9681 reset_mask2 &= ~global_bits2;
9684 * In case of attention in the QM, we need to reset PXP
9685 * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
9686 * because otherwise QM reset would release 'close the gates' shortly
9687 * before resetting the PXP, then the PSWRQ would send a write
9688 * request to PGLUE. Then when PXP is reset, PGLUE would try to
9689 * read the payload data from PSWWR, but PSWWR would not
9690 * respond. The write queue in PGLUE would stuck, dmae commands
9691 * would not return. Therefore it's important to reset the second
9692 * reset register (containing the
9693 * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
9694 * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
9697 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
9698 reset_mask2 & (~not_reset_mask2));
9700 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
9701 reset_mask1 & (~not_reset_mask1));
9706 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
9707 reset_mask2 & (~stay_reset2));
9712 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
9717 * bnx2x_er_poll_igu_vq - poll for pending writes bit.
9718 * It should get cleared in no more than 1s.
9720 * @bp: driver handle
9722 * It should get cleared in no more than 1s. Returns 0 if
9723 * pending writes bit gets cleared.
9725 static int bnx2x_er_poll_igu_vq(struct bnx2x *bp)
9731 pend_bits = REG_RD(bp, IGU_REG_PENDING_BITS_STATUS);
9736 usleep_range(1000, 2000);
9737 } while (cnt-- > 0);
9740 BNX2X_ERR("Still pending IGU requests pend_bits=%x!\n",
9748 static int bnx2x_process_kill(struct bnx2x *bp, bool global)
9752 u32 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2;
9755 /* Empty the Tetris buffer, wait for 1s */
9757 sr_cnt = REG_RD(bp, PXP2_REG_RD_SR_CNT);
9758 blk_cnt = REG_RD(bp, PXP2_REG_RD_BLK_CNT);
9759 port_is_idle_0 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_0);
9760 port_is_idle_1 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_1);
9761 pgl_exp_rom2 = REG_RD(bp, PXP2_REG_PGL_EXP_ROM2);
9763 tags_63_32 = REG_RD(bp, PGLUE_B_REG_TAGS_63_32);
9765 if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) &&
9766 ((port_is_idle_0 & 0x1) == 0x1) &&
9767 ((port_is_idle_1 & 0x1) == 0x1) &&
9768 (pgl_exp_rom2 == 0xffffffff) &&
9769 (!CHIP_IS_E3(bp) || (tags_63_32 == 0xffffffff)))
9771 usleep_range(1000, 2000);
9772 } while (cnt-- > 0);
9775 BNX2X_ERR("Tetris buffer didn't get empty or there are still outstanding read requests after 1s!\n");
9776 BNX2X_ERR("sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n",
9777 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1,
9784 /* Close gates #2, #3 and #4 */
9785 bnx2x_set_234_gates(bp, true);
9787 /* Poll for IGU VQs for 57712 and newer chips */
9788 if (!CHIP_IS_E1x(bp) && bnx2x_er_poll_igu_vq(bp))
9791 /* TBD: Indicate that "process kill" is in progress to MCP */
9793 /* Clear "unprepared" bit */
9794 REG_WR(bp, MISC_REG_UNPREPARED, 0);
9797 /* Make sure all is written to the chip before the reset */
9800 /* Wait for 1ms to empty GLUE and PCI-E core queues,
9801 * PSWHST, GRC and PSWRD Tetris buffer.
9803 usleep_range(1000, 2000);
9805 /* Prepare to chip reset: */
9808 bnx2x_reset_mcp_prep(bp, &val);
9814 /* reset the chip */
9815 bnx2x_process_kill_chip_reset(bp, global);
9818 /* clear errors in PGB */
9819 if (!CHIP_IS_E1x(bp))
9820 REG_WR(bp, PGLUE_B_REG_LATCHED_ERRORS_CLR, 0x7f);
9822 /* Recover after reset: */
9824 if (global && bnx2x_reset_mcp_comp(bp, val))
9827 /* TBD: Add resetting the NO_MCP mode DB here */
9829 /* Open the gates #2, #3 and #4 */
9830 bnx2x_set_234_gates(bp, false);
9832 /* TBD: IGU/AEU preparation bring back the AEU/IGU to a
9833 * reset state, re-enable attentions. */
9838 static int bnx2x_leader_reset(struct bnx2x *bp)
9841 bool global = bnx2x_reset_is_global(bp);
9844 /* if not going to reset MCP - load "fake" driver to reset HW while
9845 * driver is owner of the HW
9847 if (!global && !BP_NOMCP(bp)) {
9848 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ,
9849 DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
9851 BNX2X_ERR("MCP response failure, aborting\n");
9853 goto exit_leader_reset;
9855 if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
9856 (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
9857 BNX2X_ERR("MCP unexpected resp, aborting\n");
9859 goto exit_leader_reset2;
9861 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
9863 BNX2X_ERR("MCP response failure, aborting\n");
9865 goto exit_leader_reset2;
9869 /* Try to recover after the failure */
9870 if (bnx2x_process_kill(bp, global)) {
9871 BNX2X_ERR("Something bad had happen on engine %d! Aii!\n",
9874 goto exit_leader_reset2;
9878 * Clear RESET_IN_PROGRES and RESET_GLOBAL bits and update the driver
9881 bnx2x_set_reset_done(bp);
9883 bnx2x_clear_reset_global(bp);
9886 /* unload "fake driver" if it was loaded */
9887 if (!global && !BP_NOMCP(bp)) {
9888 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
9889 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
9893 bnx2x_release_leader_lock(bp);
9898 static void bnx2x_recovery_failed(struct bnx2x *bp)
9900 netdev_err(bp->dev, "Recovery has failed. Power cycle is needed.\n");
9902 /* Disconnect this device */
9903 netif_device_detach(bp->dev);
9906 * Block ifup for all function on this engine until "process kill"
9909 bnx2x_set_reset_in_progress(bp);
9911 /* Shut down the power */
9912 bnx2x_set_power_state(bp, PCI_D3hot);
9914 bp->recovery_state = BNX2X_RECOVERY_FAILED;
9920 * Assumption: runs under rtnl lock. This together with the fact
9921 * that it's called only from bnx2x_sp_rtnl() ensure that it
9922 * will never be called when netif_running(bp->dev) is false.
9924 static void bnx2x_parity_recover(struct bnx2x *bp)
9926 bool global = false;
9927 u32 error_recovered, error_unrecovered;
9930 DP(NETIF_MSG_HW, "Handling parity\n");
9932 switch (bp->recovery_state) {
9933 case BNX2X_RECOVERY_INIT:
9934 DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_INIT\n");
9935 is_parity = bnx2x_chk_parity_attn(bp, &global, false);
9936 WARN_ON(!is_parity);
9938 /* Try to get a LEADER_LOCK HW lock */
9939 if (bnx2x_trylock_leader_lock(bp)) {
9940 bnx2x_set_reset_in_progress(bp);
9942 * Check if there is a global attention and if
9943 * there was a global attention, set the global
9948 bnx2x_set_reset_global(bp);
9953 /* Stop the driver */
9954 /* If interface has been removed - break */
9955 if (bnx2x_nic_unload(bp, UNLOAD_RECOVERY, false))
9958 bp->recovery_state = BNX2X_RECOVERY_WAIT;
9960 /* Ensure "is_leader", MCP command sequence and
9961 * "recovery_state" update values are seen on other
9967 case BNX2X_RECOVERY_WAIT:
9968 DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_WAIT\n");
9969 if (bp->is_leader) {
9970 int other_engine = BP_PATH(bp) ? 0 : 1;
9971 bool other_load_status =
9972 bnx2x_get_load_status(bp, other_engine);
9974 bnx2x_get_load_status(bp, BP_PATH(bp));
9975 global = bnx2x_reset_is_global(bp);
9978 * In case of a parity in a global block, let
9979 * the first leader that performs a
9980 * leader_reset() reset the global blocks in
9981 * order to clear global attentions. Otherwise
9982 * the gates will remain closed for that
9986 (global && other_load_status)) {
9987 /* Wait until all other functions get
9990 schedule_delayed_work(&bp->sp_rtnl_task,
9994 /* If all other functions got down -
9995 * try to bring the chip back to
9996 * normal. In any case it's an exit
9997 * point for a leader.
9999 if (bnx2x_leader_reset(bp)) {
10000 bnx2x_recovery_failed(bp);
10004 /* If we are here, means that the
10005 * leader has succeeded and doesn't
10006 * want to be a leader any more. Try
10007 * to continue as a none-leader.
10011 } else { /* non-leader */
10012 if (!bnx2x_reset_is_done(bp, BP_PATH(bp))) {
10013 /* Try to get a LEADER_LOCK HW lock as
10014 * long as a former leader may have
10015 * been unloaded by the user or
10016 * released a leadership by another
10019 if (bnx2x_trylock_leader_lock(bp)) {
10020 /* I'm a leader now! Restart a
10027 schedule_delayed_work(&bp->sp_rtnl_task,
10033 * If there was a global attention, wait
10034 * for it to be cleared.
10036 if (bnx2x_reset_is_global(bp)) {
10037 schedule_delayed_work(
10044 bp->eth_stats.recoverable_error;
10045 error_unrecovered =
10046 bp->eth_stats.unrecoverable_error;
10047 bp->recovery_state =
10048 BNX2X_RECOVERY_NIC_LOADING;
10049 if (bnx2x_nic_load(bp, LOAD_NORMAL)) {
10050 error_unrecovered++;
10051 netdev_err(bp->dev,
10052 "Recovery failed. Power cycle needed\n");
10053 /* Disconnect this device */
10054 netif_device_detach(bp->dev);
10055 /* Shut down the power */
10056 bnx2x_set_power_state(
10060 bp->recovery_state =
10061 BNX2X_RECOVERY_DONE;
10065 bp->eth_stats.recoverable_error =
10067 bp->eth_stats.unrecoverable_error =
10079 #if defined(CONFIG_BNX2X_VXLAN) || IS_ENABLED(CONFIG_BNX2X_GENEVE)
10080 static int bnx2x_udp_port_update(struct bnx2x *bp)
10082 struct bnx2x_func_switch_update_params *switch_update_params;
10083 struct bnx2x_func_state_params func_params = {NULL};
10084 struct bnx2x_udp_tunnel *udp_tunnel;
10085 u16 vxlan_port = 0, geneve_port = 0;
10088 switch_update_params = &func_params.params.switch_update;
10090 /* Prepare parameters for function state transitions */
10091 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
10092 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags);
10094 func_params.f_obj = &bp->func_obj;
10095 func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE;
10097 /* Function parameters */
10098 __set_bit(BNX2X_F_UPDATE_TUNNEL_CFG_CHNG,
10099 &switch_update_params->changes);
10101 if (bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE].count) {
10102 udp_tunnel = &bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE];
10103 geneve_port = udp_tunnel->dst_port;
10104 switch_update_params->geneve_dst_port = geneve_port;
10107 if (bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN].count) {
10108 udp_tunnel = &bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN];
10109 vxlan_port = udp_tunnel->dst_port;
10110 switch_update_params->vxlan_dst_port = vxlan_port;
10113 /* Re-enable inner-rss for the offloaded UDP tunnels */
10114 __set_bit(BNX2X_F_UPDATE_TUNNEL_INNER_RSS,
10115 &switch_update_params->changes);
10117 rc = bnx2x_func_state_change(bp, &func_params);
10119 BNX2X_ERR("failed to set UDP dst port to %04x %04x (rc = 0x%x)\n",
10120 vxlan_port, geneve_port, rc);
10123 "Configured UDP ports: Vxlan [%04x] Geneve [%04x]\n",
10124 vxlan_port, geneve_port);
10129 static void __bnx2x_add_udp_port(struct bnx2x *bp, u16 port,
10130 enum bnx2x_udp_port_type type)
10132 struct bnx2x_udp_tunnel *udp_port = &bp->udp_tunnel_ports[type];
10134 if (!netif_running(bp->dev) || !IS_PF(bp))
10137 if (udp_port->count && udp_port->dst_port == port) {
10142 if (udp_port->count) {
10144 "UDP tunnel [%d] - destination port limit reached\n",
10149 udp_port->dst_port = port;
10150 udp_port->count = 1;
10151 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_CHANGE_UDP_PORT, 0);
10154 static void __bnx2x_del_udp_port(struct bnx2x *bp, u16 port,
10155 enum bnx2x_udp_port_type type)
10157 struct bnx2x_udp_tunnel *udp_port = &bp->udp_tunnel_ports[type];
10162 if (!udp_port->count || udp_port->dst_port != port) {
10163 DP(BNX2X_MSG_SP, "Invalid UDP tunnel [%d] port\n",
10168 /* Remove reference, and make certain it's no longer in use */
10170 if (udp_port->count)
10172 udp_port->dst_port = 0;
10174 if (netif_running(bp->dev))
10175 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_CHANGE_UDP_PORT, 0);
10177 DP(BNX2X_MSG_SP, "Deleted UDP tunnel [%d] port %d\n",
10182 #ifdef CONFIG_BNX2X_VXLAN
10183 static void bnx2x_add_vxlan_port(struct net_device *netdev,
10184 sa_family_t sa_family, __be16 port)
10186 struct bnx2x *bp = netdev_priv(netdev);
10187 u16 t_port = ntohs(port);
10189 __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN);
10192 static void bnx2x_del_vxlan_port(struct net_device *netdev,
10193 sa_family_t sa_family, __be16 port)
10195 struct bnx2x *bp = netdev_priv(netdev);
10196 u16 t_port = ntohs(port);
10198 __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN);
10202 #if IS_ENABLED(CONFIG_BNX2X_GENEVE)
10203 static void bnx2x_add_geneve_port(struct net_device *netdev,
10204 sa_family_t sa_family, __be16 port)
10206 struct bnx2x *bp = netdev_priv(netdev);
10207 u16 t_port = ntohs(port);
10209 __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE);
10212 static void bnx2x_del_geneve_port(struct net_device *netdev,
10213 sa_family_t sa_family, __be16 port)
10215 struct bnx2x *bp = netdev_priv(netdev);
10216 u16 t_port = ntohs(port);
10218 __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE);
10222 static int bnx2x_close(struct net_device *dev);
10224 /* bnx2x_nic_unload() flushes the bnx2x_wq, thus reset task is
10225 * scheduled on a general queue in order to prevent a dead lock.
10227 static void bnx2x_sp_rtnl_task(struct work_struct *work)
10229 struct bnx2x *bp = container_of(work, struct bnx2x, sp_rtnl_task.work);
10233 if (!netif_running(bp->dev)) {
10238 if (unlikely(bp->recovery_state != BNX2X_RECOVERY_DONE)) {
10239 #ifdef BNX2X_STOP_ON_ERROR
10240 BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n"
10241 "you will need to reboot when done\n");
10242 goto sp_rtnl_not_reset;
10245 * Clear all pending SP commands as we are going to reset the
10248 bp->sp_rtnl_state = 0;
10251 bnx2x_parity_recover(bp);
10257 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state)) {
10258 #ifdef BNX2X_STOP_ON_ERROR
10259 BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n"
10260 "you will need to reboot when done\n");
10261 goto sp_rtnl_not_reset;
10265 * Clear all pending SP commands as we are going to reset the
10268 bp->sp_rtnl_state = 0;
10271 bnx2x_nic_unload(bp, UNLOAD_NORMAL, true);
10272 bnx2x_nic_load(bp, LOAD_NORMAL);
10277 #ifdef BNX2X_STOP_ON_ERROR
10280 if (test_and_clear_bit(BNX2X_SP_RTNL_SETUP_TC, &bp->sp_rtnl_state))
10281 bnx2x_setup_tc(bp->dev, bp->dcbx_port_params.ets.num_of_cos);
10282 if (test_and_clear_bit(BNX2X_SP_RTNL_AFEX_F_UPDATE, &bp->sp_rtnl_state))
10283 bnx2x_after_function_update(bp);
10285 * in case of fan failure we need to reset id if the "stop on error"
10286 * debug flag is set, since we trying to prevent permanent overheating
10289 if (test_and_clear_bit(BNX2X_SP_RTNL_FAN_FAILURE, &bp->sp_rtnl_state)) {
10290 DP(NETIF_MSG_HW, "fan failure detected. Unloading driver\n");
10291 netif_device_detach(bp->dev);
10292 bnx2x_close(bp->dev);
10297 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_MCAST, &bp->sp_rtnl_state)) {
10299 "sending set mcast vf pf channel message from rtnl sp-task\n");
10300 bnx2x_vfpf_set_mcast(bp->dev);
10302 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN,
10303 &bp->sp_rtnl_state)){
10304 if (!test_bit(__LINK_STATE_NOCARRIER, &bp->dev->state)) {
10305 bnx2x_tx_disable(bp);
10306 BNX2X_ERR("PF indicated channel is not servicable anymore. This means this VF device is no longer operational\n");
10310 if (test_and_clear_bit(BNX2X_SP_RTNL_RX_MODE, &bp->sp_rtnl_state)) {
10311 DP(BNX2X_MSG_SP, "Handling Rx Mode setting\n");
10312 bnx2x_set_rx_mode_inner(bp);
10315 if (test_and_clear_bit(BNX2X_SP_RTNL_HYPERVISOR_VLAN,
10316 &bp->sp_rtnl_state))
10317 bnx2x_pf_set_vfs_vlan(bp);
10319 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_STOP, &bp->sp_rtnl_state)) {
10320 bnx2x_dcbx_stop_hw_tx(bp);
10321 bnx2x_dcbx_resume_hw_tx(bp);
10324 if (test_and_clear_bit(BNX2X_SP_RTNL_GET_DRV_VERSION,
10325 &bp->sp_rtnl_state))
10326 bnx2x_update_mng_version(bp);
10328 #if defined(CONFIG_BNX2X_VXLAN) || IS_ENABLED(CONFIG_BNX2X_GENEVE)
10329 if (test_and_clear_bit(BNX2X_SP_RTNL_CHANGE_UDP_PORT,
10330 &bp->sp_rtnl_state)) {
10331 if (bnx2x_udp_port_update(bp)) {
10332 /* On error, forget configuration */
10333 memset(bp->udp_tunnel_ports, 0,
10334 sizeof(struct bnx2x_udp_tunnel) *
10335 BNX2X_UDP_PORT_MAX);
10337 /* Since we don't store additional port information,
10338 * if no port is configured for any feature ask for
10339 * information about currently configured ports.
10341 #ifdef CONFIG_BNX2X_VXLAN
10342 if (!bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN].count)
10343 vxlan_get_rx_port(bp->dev);
10345 #if IS_ENABLED(CONFIG_BNX2X_GENEVE)
10346 if (!bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE].count)
10347 geneve_get_rx_port(bp->dev);
10353 /* work which needs rtnl lock not-taken (as it takes the lock itself and
10354 * can be called from other contexts as well)
10358 /* enable SR-IOV if applicable */
10359 if (IS_SRIOV(bp) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV,
10360 &bp->sp_rtnl_state)) {
10361 bnx2x_disable_sriov(bp);
10362 bnx2x_enable_sriov(bp);
10366 static void bnx2x_period_task(struct work_struct *work)
10368 struct bnx2x *bp = container_of(work, struct bnx2x, period_task.work);
10370 if (!netif_running(bp->dev))
10371 goto period_task_exit;
10373 if (CHIP_REV_IS_SLOW(bp)) {
10374 BNX2X_ERR("period task called on emulation, ignoring\n");
10375 goto period_task_exit;
10378 bnx2x_acquire_phy_lock(bp);
10380 * The barrier is needed to ensure the ordering between the writing to
10381 * the bp->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and
10382 * the reading here.
10385 if (bp->port.pmf) {
10386 bnx2x_period_func(&bp->link_params, &bp->link_vars);
10388 /* Re-queue task in 1 sec */
10389 queue_delayed_work(bnx2x_wq, &bp->period_task, 1*HZ);
10392 bnx2x_release_phy_lock(bp);
10398 * Init service functions
10401 static u32 bnx2x_get_pretend_reg(struct bnx2x *bp)
10403 u32 base = PXP2_REG_PGL_PRETEND_FUNC_F0;
10404 u32 stride = PXP2_REG_PGL_PRETEND_FUNC_F1 - base;
10405 return base + (BP_ABS_FUNC(bp)) * stride;
10408 static bool bnx2x_prev_unload_close_umac(struct bnx2x *bp,
10409 u8 port, u32 reset_reg,
10410 struct bnx2x_mac_vals *vals)
10412 u32 mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
10415 if (!(mask & reset_reg))
10418 BNX2X_DEV_INFO("Disable umac Rx %02x\n", port);
10419 base_addr = port ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
10420 vals->umac_addr[port] = base_addr + UMAC_REG_COMMAND_CONFIG;
10421 vals->umac_val[port] = REG_RD(bp, vals->umac_addr[port]);
10422 REG_WR(bp, vals->umac_addr[port], 0);
10427 static void bnx2x_prev_unload_close_mac(struct bnx2x *bp,
10428 struct bnx2x_mac_vals *vals)
10430 u32 val, base_addr, offset, mask, reset_reg;
10431 bool mac_stopped = false;
10432 u8 port = BP_PORT(bp);
10434 /* reset addresses as they also mark which values were changed */
10435 memset(vals, 0, sizeof(*vals));
10437 reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2);
10439 if (!CHIP_IS_E3(bp)) {
10440 val = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);
10441 mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port;
10442 if ((mask & reset_reg) && val) {
10444 BNX2X_DEV_INFO("Disable bmac Rx\n");
10445 base_addr = BP_PORT(bp) ? NIG_REG_INGRESS_BMAC1_MEM
10446 : NIG_REG_INGRESS_BMAC0_MEM;
10447 offset = CHIP_IS_E2(bp) ? BIGMAC2_REGISTER_BMAC_CONTROL
10448 : BIGMAC_REGISTER_BMAC_CONTROL;
10451 * use rd/wr since we cannot use dmae. This is safe
10452 * since MCP won't access the bus due to the request
10453 * to unload, and no function on the path can be
10454 * loaded at this time.
10456 wb_data[0] = REG_RD(bp, base_addr + offset);
10457 wb_data[1] = REG_RD(bp, base_addr + offset + 0x4);
10458 vals->bmac_addr = base_addr + offset;
10459 vals->bmac_val[0] = wb_data[0];
10460 vals->bmac_val[1] = wb_data[1];
10461 wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE;
10462 REG_WR(bp, vals->bmac_addr, wb_data[0]);
10463 REG_WR(bp, vals->bmac_addr + 0x4, wb_data[1]);
10465 BNX2X_DEV_INFO("Disable emac Rx\n");
10466 vals->emac_addr = NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4;
10467 vals->emac_val = REG_RD(bp, vals->emac_addr);
10468 REG_WR(bp, vals->emac_addr, 0);
10469 mac_stopped = true;
10471 if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) {
10472 BNX2X_DEV_INFO("Disable xmac Rx\n");
10473 base_addr = BP_PORT(bp) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
10474 val = REG_RD(bp, base_addr + XMAC_REG_PFC_CTRL_HI);
10475 REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI,
10477 REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI,
10479 vals->xmac_addr = base_addr + XMAC_REG_CTRL;
10480 vals->xmac_val = REG_RD(bp, vals->xmac_addr);
10481 REG_WR(bp, vals->xmac_addr, 0);
10482 mac_stopped = true;
10485 mac_stopped |= bnx2x_prev_unload_close_umac(bp, 0,
10487 mac_stopped |= bnx2x_prev_unload_close_umac(bp, 1,
10495 #define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
10496 #define BNX2X_PREV_UNDI_PROD_ADDR_H(f) (BAR_TSTRORM_INTMEM + \
10497 0x1848 + ((f) << 4))
10498 #define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff)
10499 #define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
10500 #define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
10502 #define BCM_5710_UNDI_FW_MF_MAJOR (0x07)
10503 #define BCM_5710_UNDI_FW_MF_MINOR (0x08)
10504 #define BCM_5710_UNDI_FW_MF_VERS (0x05)
10506 static bool bnx2x_prev_is_after_undi(struct bnx2x *bp)
10508 /* UNDI marks its presence in DORQ -
10509 * it initializes CID offset for normal bell to 0x7
10511 if (!(REG_RD(bp, MISC_REG_RESET_REG_1) &
10512 MISC_REGISTERS_RESET_REG_1_RST_DORQ))
10515 if (REG_RD(bp, DORQ_REG_NORM_CID_OFST) == 0x7) {
10516 BNX2X_DEV_INFO("UNDI previously loaded\n");
10523 static void bnx2x_prev_unload_undi_inc(struct bnx2x *bp, u8 inc)
10528 if (BP_FUNC(bp) < 2)
10529 addr = BNX2X_PREV_UNDI_PROD_ADDR(BP_PORT(bp));
10531 addr = BNX2X_PREV_UNDI_PROD_ADDR_H(BP_FUNC(bp) - 2);
10533 tmp_reg = REG_RD(bp, addr);
10534 rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc;
10535 bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc;
10537 tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd);
10538 REG_WR(bp, addr, tmp_reg);
10540 BNX2X_DEV_INFO("UNDI producer [%d/%d][%08x] rings bd -> 0x%04x, rcq -> 0x%04x\n",
10541 BP_PORT(bp), BP_FUNC(bp), addr, bd, rcq);
10544 static int bnx2x_prev_mcp_done(struct bnx2x *bp)
10546 u32 rc = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE,
10547 DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET);
10549 BNX2X_ERR("MCP response failure, aborting\n");
10556 static struct bnx2x_prev_path_list *
10557 bnx2x_prev_path_get_entry(struct bnx2x *bp)
10559 struct bnx2x_prev_path_list *tmp_list;
10561 list_for_each_entry(tmp_list, &bnx2x_prev_list, list)
10562 if (PCI_SLOT(bp->pdev->devfn) == tmp_list->slot &&
10563 bp->pdev->bus->number == tmp_list->bus &&
10564 BP_PATH(bp) == tmp_list->path)
10570 static int bnx2x_prev_path_mark_eeh(struct bnx2x *bp)
10572 struct bnx2x_prev_path_list *tmp_list;
10575 rc = down_interruptible(&bnx2x_prev_sem);
10577 BNX2X_ERR("Received %d when tried to take lock\n", rc);
10581 tmp_list = bnx2x_prev_path_get_entry(bp);
10586 BNX2X_ERR("path %d: Entry does not exist for eeh; Flow occurs before initial insmod is over ?\n",
10590 up(&bnx2x_prev_sem);
10595 static bool bnx2x_prev_is_path_marked(struct bnx2x *bp)
10597 struct bnx2x_prev_path_list *tmp_list;
10600 if (down_trylock(&bnx2x_prev_sem))
10603 tmp_list = bnx2x_prev_path_get_entry(bp);
10605 if (tmp_list->aer) {
10606 DP(NETIF_MSG_HW, "Path %d was marked by AER\n",
10610 BNX2X_DEV_INFO("Path %d was already cleaned from previous drivers\n",
10615 up(&bnx2x_prev_sem);
10620 bool bnx2x_port_after_undi(struct bnx2x *bp)
10622 struct bnx2x_prev_path_list *entry;
10625 down(&bnx2x_prev_sem);
10627 entry = bnx2x_prev_path_get_entry(bp);
10628 val = !!(entry && (entry->undi & (1 << BP_PORT(bp))));
10630 up(&bnx2x_prev_sem);
10635 static int bnx2x_prev_mark_path(struct bnx2x *bp, bool after_undi)
10637 struct bnx2x_prev_path_list *tmp_list;
10640 rc = down_interruptible(&bnx2x_prev_sem);
10642 BNX2X_ERR("Received %d when tried to take lock\n", rc);
10646 /* Check whether the entry for this path already exists */
10647 tmp_list = bnx2x_prev_path_get_entry(bp);
10649 if (!tmp_list->aer) {
10650 BNX2X_ERR("Re-Marking the path.\n");
10652 DP(NETIF_MSG_HW, "Removing AER indication from path %d\n",
10656 up(&bnx2x_prev_sem);
10659 up(&bnx2x_prev_sem);
10661 /* Create an entry for this path and add it */
10662 tmp_list = kmalloc(sizeof(struct bnx2x_prev_path_list), GFP_KERNEL);
10664 BNX2X_ERR("Failed to allocate 'bnx2x_prev_path_list'\n");
10668 tmp_list->bus = bp->pdev->bus->number;
10669 tmp_list->slot = PCI_SLOT(bp->pdev->devfn);
10670 tmp_list->path = BP_PATH(bp);
10672 tmp_list->undi = after_undi ? (1 << BP_PORT(bp)) : 0;
10674 rc = down_interruptible(&bnx2x_prev_sem);
10676 BNX2X_ERR("Received %d when tried to take lock\n", rc);
10679 DP(NETIF_MSG_HW, "Marked path [%d] - finished previous unload\n",
10681 list_add(&tmp_list->list, &bnx2x_prev_list);
10682 up(&bnx2x_prev_sem);
10688 static int bnx2x_do_flr(struct bnx2x *bp)
10690 struct pci_dev *dev = bp->pdev;
10692 if (CHIP_IS_E1x(bp)) {
10693 BNX2X_DEV_INFO("FLR not supported in E1/E1H\n");
10697 /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */
10698 if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) {
10699 BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n",
10700 bp->common.bc_ver);
10704 if (!pci_wait_for_pending_transaction(dev))
10705 dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
10707 BNX2X_DEV_INFO("Initiating FLR\n");
10708 bnx2x_fw_command(bp, DRV_MSG_CODE_INITIATE_FLR, 0);
10713 static int bnx2x_prev_unload_uncommon(struct bnx2x *bp)
10717 BNX2X_DEV_INFO("Uncommon unload Flow\n");
10719 /* Test if previous unload process was already finished for this path */
10720 if (bnx2x_prev_is_path_marked(bp))
10721 return bnx2x_prev_mcp_done(bp);
10723 BNX2X_DEV_INFO("Path is unmarked\n");
10725 /* Cannot proceed with FLR if UNDI is loaded, since FW does not match */
10726 if (bnx2x_prev_is_after_undi(bp))
10729 /* If function has FLR capabilities, and existing FW version matches
10730 * the one required, then FLR will be sufficient to clean any residue
10731 * left by previous driver
10733 rc = bnx2x_compare_fw_ver(bp, FW_MSG_CODE_DRV_LOAD_FUNCTION, false);
10736 /* fw version is good */
10737 BNX2X_DEV_INFO("FW version matches our own. Attempting FLR\n");
10738 rc = bnx2x_do_flr(bp);
10742 /* FLR was performed */
10743 BNX2X_DEV_INFO("FLR successful\n");
10747 BNX2X_DEV_INFO("Could not FLR\n");
10750 /* Close the MCP request, return failure*/
10751 rc = bnx2x_prev_mcp_done(bp);
10753 rc = BNX2X_PREV_WAIT_NEEDED;
10758 static int bnx2x_prev_unload_common(struct bnx2x *bp)
10760 u32 reset_reg, tmp_reg = 0, rc;
10761 bool prev_undi = false;
10762 struct bnx2x_mac_vals mac_vals;
10764 /* It is possible a previous function received 'common' answer,
10765 * but hasn't loaded yet, therefore creating a scenario of
10766 * multiple functions receiving 'common' on the same path.
10768 BNX2X_DEV_INFO("Common unload Flow\n");
10770 memset(&mac_vals, 0, sizeof(mac_vals));
10772 if (bnx2x_prev_is_path_marked(bp))
10773 return bnx2x_prev_mcp_done(bp);
10775 reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1);
10777 /* Reset should be performed after BRB is emptied */
10778 if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) {
10779 u32 timer_count = 1000;
10781 /* Close the MAC Rx to prevent BRB from filling up */
10782 bnx2x_prev_unload_close_mac(bp, &mac_vals);
10784 /* close LLH filters for both ports towards the BRB */
10785 bnx2x_set_rx_filter(&bp->link_params, 0);
10786 bp->link_params.port ^= 1;
10787 bnx2x_set_rx_filter(&bp->link_params, 0);
10788 bp->link_params.port ^= 1;
10790 /* Check if the UNDI driver was previously loaded */
10791 if (bnx2x_prev_is_after_undi(bp)) {
10793 /* clear the UNDI indication */
10794 REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
10795 /* clear possible idle check errors */
10796 REG_RD(bp, NIG_REG_NIG_INT_STS_CLR_0);
10798 if (!CHIP_IS_E1x(bp))
10799 /* block FW from writing to host */
10800 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
10802 /* wait until BRB is empty */
10803 tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS);
10804 while (timer_count) {
10805 u32 prev_brb = tmp_reg;
10807 tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS);
10811 BNX2X_DEV_INFO("BRB still has 0x%08x\n", tmp_reg);
10813 /* reset timer as long as BRB actually gets emptied */
10814 if (prev_brb > tmp_reg)
10815 timer_count = 1000;
10819 /* If UNDI resides in memory, manually increment it */
10821 bnx2x_prev_unload_undi_inc(bp, 1);
10827 BNX2X_ERR("Failed to empty BRB, hope for the best\n");
10830 /* No packets are in the pipeline, path is ready for reset */
10831 bnx2x_reset_common(bp);
10833 if (mac_vals.xmac_addr)
10834 REG_WR(bp, mac_vals.xmac_addr, mac_vals.xmac_val);
10835 if (mac_vals.umac_addr[0])
10836 REG_WR(bp, mac_vals.umac_addr[0], mac_vals.umac_val[0]);
10837 if (mac_vals.umac_addr[1])
10838 REG_WR(bp, mac_vals.umac_addr[1], mac_vals.umac_val[1]);
10839 if (mac_vals.emac_addr)
10840 REG_WR(bp, mac_vals.emac_addr, mac_vals.emac_val);
10841 if (mac_vals.bmac_addr) {
10842 REG_WR(bp, mac_vals.bmac_addr, mac_vals.bmac_val[0]);
10843 REG_WR(bp, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]);
10846 rc = bnx2x_prev_mark_path(bp, prev_undi);
10848 bnx2x_prev_mcp_done(bp);
10852 return bnx2x_prev_mcp_done(bp);
10855 static int bnx2x_prev_unload(struct bnx2x *bp)
10857 int time_counter = 10;
10858 u32 rc, fw, hw_lock_reg, hw_lock_val;
10859 BNX2X_DEV_INFO("Entering Previous Unload Flow\n");
10861 /* clear hw from errors which may have resulted from an interrupted
10862 * dmae transaction.
10864 bnx2x_clean_pglue_errors(bp);
10866 /* Release previously held locks */
10867 hw_lock_reg = (BP_FUNC(bp) <= 5) ?
10868 (MISC_REG_DRIVER_CONTROL_1 + BP_FUNC(bp) * 8) :
10869 (MISC_REG_DRIVER_CONTROL_7 + (BP_FUNC(bp) - 6) * 8);
10871 hw_lock_val = REG_RD(bp, hw_lock_reg);
10873 if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) {
10874 BNX2X_DEV_INFO("Release Previously held NVRAM lock\n");
10875 REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB,
10876 (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << BP_PORT(bp)));
10879 BNX2X_DEV_INFO("Release Previously held hw lock\n");
10880 REG_WR(bp, hw_lock_reg, 0xffffffff);
10882 BNX2X_DEV_INFO("No need to release hw/nvram locks\n");
10884 if (MCPR_ACCESS_LOCK_LOCK & REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK)) {
10885 BNX2X_DEV_INFO("Release previously held alr\n");
10886 bnx2x_release_alr(bp);
10891 /* Lock MCP using an unload request */
10892 fw = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0);
10894 BNX2X_ERR("MCP response failure, aborting\n");
10899 rc = down_interruptible(&bnx2x_prev_sem);
10901 BNX2X_ERR("Cannot check for AER; Received %d when tried to take lock\n",
10904 /* If Path is marked by EEH, ignore unload status */
10905 aer = !!(bnx2x_prev_path_get_entry(bp) &&
10906 bnx2x_prev_path_get_entry(bp)->aer);
10907 up(&bnx2x_prev_sem);
10910 if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON || aer) {
10911 rc = bnx2x_prev_unload_common(bp);
10915 /* non-common reply from MCP might require looping */
10916 rc = bnx2x_prev_unload_uncommon(bp);
10917 if (rc != BNX2X_PREV_WAIT_NEEDED)
10921 } while (--time_counter);
10923 if (!time_counter || rc) {
10924 BNX2X_DEV_INFO("Unloading previous driver did not occur, Possibly due to MF UNDI\n");
10925 rc = -EPROBE_DEFER;
10928 /* Mark function if its port was used to boot from SAN */
10929 if (bnx2x_port_after_undi(bp))
10930 bp->link_params.feature_config_flags |=
10931 FEATURE_CONFIG_BOOT_FROM_SAN;
10933 BNX2X_DEV_INFO("Finished Previous Unload Flow [%d]\n", rc);
10938 static void bnx2x_get_common_hwinfo(struct bnx2x *bp)
10940 u32 val, val2, val3, val4, id, boot_mode;
10943 /* Get the chip revision id and number. */
10944 /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
10945 val = REG_RD(bp, MISC_REG_CHIP_NUM);
10946 id = ((val & 0xffff) << 16);
10947 val = REG_RD(bp, MISC_REG_CHIP_REV);
10948 id |= ((val & 0xf) << 12);
10950 /* Metal is read from PCI regs, but we can't access >=0x400 from
10951 * the configuration space (so we need to reg_rd)
10953 val = REG_RD(bp, PCICFG_OFFSET + PCI_ID_VAL3);
10954 id |= (((val >> 24) & 0xf) << 4);
10955 val = REG_RD(bp, MISC_REG_BOND_ID);
10957 bp->common.chip_id = id;
10959 /* force 57811 according to MISC register */
10960 if (REG_RD(bp, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) {
10961 if (CHIP_IS_57810(bp))
10962 bp->common.chip_id = (CHIP_NUM_57811 << 16) |
10963 (bp->common.chip_id & 0x0000FFFF);
10964 else if (CHIP_IS_57810_MF(bp))
10965 bp->common.chip_id = (CHIP_NUM_57811_MF << 16) |
10966 (bp->common.chip_id & 0x0000FFFF);
10967 bp->common.chip_id |= 0x1;
10970 /* Set doorbell size */
10971 bp->db_size = (1 << BNX2X_DB_SHIFT);
10973 if (!CHIP_IS_E1x(bp)) {
10974 val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR);
10975 if ((val & 1) == 0)
10976 val = REG_RD(bp, MISC_REG_PORT4MODE_EN);
10978 val = (val >> 1) & 1;
10979 BNX2X_DEV_INFO("chip is in %s\n", val ? "4_PORT_MODE" :
10981 bp->common.chip_port_mode = val ? CHIP_4_PORT_MODE :
10984 if (CHIP_MODE_IS_4_PORT(bp))
10985 bp->pfid = (bp->pf_num >> 1); /* 0..3 */
10987 bp->pfid = (bp->pf_num & 0x6); /* 0, 2, 4, 6 */
10989 bp->common.chip_port_mode = CHIP_PORT_MODE_NONE; /* N/A */
10990 bp->pfid = bp->pf_num; /* 0..7 */
10993 BNX2X_DEV_INFO("pf_id: %x", bp->pfid);
10995 bp->link_params.chip_id = bp->common.chip_id;
10996 BNX2X_DEV_INFO("chip ID is 0x%x\n", id);
10998 val = (REG_RD(bp, 0x2874) & 0x55);
10999 if ((bp->common.chip_id & 0x1) ||
11000 (CHIP_IS_E1(bp) && val) || (CHIP_IS_E1H(bp) && (val == 0x55))) {
11001 bp->flags |= ONE_PORT_FLAG;
11002 BNX2X_DEV_INFO("single port device\n");
11005 val = REG_RD(bp, MCP_REG_MCPR_NVM_CFG4);
11006 bp->common.flash_size = (BNX2X_NVRAM_1MB_SIZE <<
11007 (val & MCPR_NVM_CFG4_FLASH_SIZE));
11008 BNX2X_DEV_INFO("flash_size 0x%x (%d)\n",
11009 bp->common.flash_size, bp->common.flash_size);
11011 bnx2x_init_shmem(bp);
11013 bp->common.shmem2_base = REG_RD(bp, (BP_PATH(bp) ?
11014 MISC_REG_GENERIC_CR_1 :
11015 MISC_REG_GENERIC_CR_0));
11017 bp->link_params.shmem_base = bp->common.shmem_base;
11018 bp->link_params.shmem2_base = bp->common.shmem2_base;
11019 if (SHMEM2_RD(bp, size) >
11020 (u32)offsetof(struct shmem2_region, lfa_host_addr[BP_PORT(bp)]))
11021 bp->link_params.lfa_base =
11022 REG_RD(bp, bp->common.shmem2_base +
11023 (u32)offsetof(struct shmem2_region,
11024 lfa_host_addr[BP_PORT(bp)]));
11026 bp->link_params.lfa_base = 0;
11027 BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n",
11028 bp->common.shmem_base, bp->common.shmem2_base);
11030 if (!bp->common.shmem_base) {
11031 BNX2X_DEV_INFO("MCP not active\n");
11032 bp->flags |= NO_MCP_FLAG;
11036 bp->common.hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
11037 BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config);
11039 bp->link_params.hw_led_mode = ((bp->common.hw_config &
11040 SHARED_HW_CFG_LED_MODE_MASK) >>
11041 SHARED_HW_CFG_LED_MODE_SHIFT);
11043 bp->link_params.feature_config_flags = 0;
11044 val = SHMEM_RD(bp, dev_info.shared_feature_config.config);
11045 if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED)
11046 bp->link_params.feature_config_flags |=
11047 FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
11049 bp->link_params.feature_config_flags &=
11050 ~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
11052 val = SHMEM_RD(bp, dev_info.bc_rev) >> 8;
11053 bp->common.bc_ver = val;
11054 BNX2X_DEV_INFO("bc_ver %X\n", val);
11055 if (val < BNX2X_BC_VER) {
11056 /* for now only warn
11057 * later we might need to enforce this */
11058 BNX2X_ERR("This driver needs bc_ver %X but found %X, please upgrade BC\n",
11059 BNX2X_BC_VER, val);
11061 bp->link_params.feature_config_flags |=
11062 (val >= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL) ?
11063 FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0;
11065 bp->link_params.feature_config_flags |=
11066 (val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ?
11067 FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0;
11068 bp->link_params.feature_config_flags |=
11069 (val >= REQ_BC_VER_4_VRFY_AFEX_SUPPORTED) ?
11070 FEATURE_CONFIG_BC_SUPPORTS_AFEX : 0;
11071 bp->link_params.feature_config_flags |=
11072 (val >= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED) ?
11073 FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED : 0;
11075 bp->link_params.feature_config_flags |=
11076 (val >= REQ_BC_VER_4_MT_SUPPORTED) ?
11077 FEATURE_CONFIG_MT_SUPPORT : 0;
11079 bp->flags |= (val >= REQ_BC_VER_4_PFC_STATS_SUPPORTED) ?
11080 BC_SUPPORTS_PFC_STATS : 0;
11082 bp->flags |= (val >= REQ_BC_VER_4_FCOE_FEATURES) ?
11083 BC_SUPPORTS_FCOE_FEATURES : 0;
11085 bp->flags |= (val >= REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF) ?
11086 BC_SUPPORTS_DCBX_MSG_NON_PMF : 0;
11088 bp->flags |= (val >= REQ_BC_VER_4_RMMOD_CMD) ?
11089 BC_SUPPORTS_RMMOD_CMD : 0;
11091 boot_mode = SHMEM_RD(bp,
11092 dev_info.port_feature_config[BP_PORT(bp)].mba_config) &
11093 PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK;
11094 switch (boot_mode) {
11095 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE:
11096 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_PXE;
11098 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_ISCSIB:
11099 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_ISCSI;
11101 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_FCOE_BOOT:
11102 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_FCOE;
11104 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_NONE:
11105 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_NONE;
11109 pci_read_config_word(bp->pdev, bp->pdev->pm_cap + PCI_PM_PMC, &pmc);
11110 bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
11112 BNX2X_DEV_INFO("%sWoL capable\n",
11113 (bp->flags & NO_WOL_FLAG) ? "not " : "");
11115 val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num);
11116 val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]);
11117 val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]);
11118 val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]);
11120 dev_info(&bp->pdev->dev, "part number %X-%X-%X-%X\n",
11121 val, val2, val3, val4);
11124 #define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
11125 #define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)
11127 static int bnx2x_get_igu_cam_info(struct bnx2x *bp)
11129 int pfid = BP_FUNC(bp);
11132 u8 fid, igu_sb_cnt = 0;
11134 bp->igu_base_sb = 0xff;
11135 if (CHIP_INT_MODE_IS_BC(bp)) {
11136 int vn = BP_VN(bp);
11137 igu_sb_cnt = bp->igu_sb_cnt;
11138 bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) *
11141 bp->igu_dsb_id = E1HVN_MAX * FP_SB_MAX_E1x +
11142 (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn);
11147 /* IGU in normal mode - read CAM */
11148 for (igu_sb_id = 0; igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE;
11150 val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4);
11151 if (!(val & IGU_REG_MAPPING_MEMORY_VALID))
11153 fid = IGU_FID(val);
11154 if ((fid & IGU_FID_ENCODE_IS_PF)) {
11155 if ((fid & IGU_FID_PF_NUM_MASK) != pfid)
11157 if (IGU_VEC(val) == 0)
11158 /* default status block */
11159 bp->igu_dsb_id = igu_sb_id;
11161 if (bp->igu_base_sb == 0xff)
11162 bp->igu_base_sb = igu_sb_id;
11168 #ifdef CONFIG_PCI_MSI
11169 /* Due to new PF resource allocation by MFW T7.4 and above, it's
11170 * optional that number of CAM entries will not be equal to the value
11171 * advertised in PCI.
11172 * Driver should use the minimal value of both as the actual status
11175 bp->igu_sb_cnt = min_t(int, bp->igu_sb_cnt, igu_sb_cnt);
11178 if (igu_sb_cnt == 0) {
11179 BNX2X_ERR("CAM configuration error\n");
11186 static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
11188 int cfg_size = 0, idx, port = BP_PORT(bp);
11190 /* Aggregation of supported attributes of all external phys */
11191 bp->port.supported[0] = 0;
11192 bp->port.supported[1] = 0;
11193 switch (bp->link_params.num_phys) {
11195 bp->port.supported[0] = bp->link_params.phy[INT_PHY].supported;
11199 bp->port.supported[0] = bp->link_params.phy[EXT_PHY1].supported;
11203 if (bp->link_params.multi_phy_config &
11204 PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
11205 bp->port.supported[1] =
11206 bp->link_params.phy[EXT_PHY1].supported;
11207 bp->port.supported[0] =
11208 bp->link_params.phy[EXT_PHY2].supported;
11210 bp->port.supported[0] =
11211 bp->link_params.phy[EXT_PHY1].supported;
11212 bp->port.supported[1] =
11213 bp->link_params.phy[EXT_PHY2].supported;
11219 if (!(bp->port.supported[0] || bp->port.supported[1])) {
11220 BNX2X_ERR("NVRAM config error. BAD phy config. PHY1 config 0x%x, PHY2 config 0x%x\n",
11222 dev_info.port_hw_config[port].external_phy_config),
11224 dev_info.port_hw_config[port].external_phy_config2));
11228 if (CHIP_IS_E3(bp))
11229 bp->port.phy_addr = REG_RD(bp, MISC_REG_WC0_CTRL_PHY_ADDR);
11231 switch (switch_cfg) {
11232 case SWITCH_CFG_1G:
11233 bp->port.phy_addr = REG_RD(
11234 bp, NIG_REG_SERDES0_CTRL_PHY_ADDR + port*0x10);
11236 case SWITCH_CFG_10G:
11237 bp->port.phy_addr = REG_RD(
11238 bp, NIG_REG_XGXS0_CTRL_PHY_ADDR + port*0x18);
11241 BNX2X_ERR("BAD switch_cfg link_config 0x%x\n",
11242 bp->port.link_config[0]);
11246 BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr);
11247 /* mask what we support according to speed_cap_mask per configuration */
11248 for (idx = 0; idx < cfg_size; idx++) {
11249 if (!(bp->link_params.speed_cap_mask[idx] &
11250 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF))
11251 bp->port.supported[idx] &= ~SUPPORTED_10baseT_Half;
11253 if (!(bp->link_params.speed_cap_mask[idx] &
11254 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL))
11255 bp->port.supported[idx] &= ~SUPPORTED_10baseT_Full;
11257 if (!(bp->link_params.speed_cap_mask[idx] &
11258 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))
11259 bp->port.supported[idx] &= ~SUPPORTED_100baseT_Half;
11261 if (!(bp->link_params.speed_cap_mask[idx] &
11262 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL))
11263 bp->port.supported[idx] &= ~SUPPORTED_100baseT_Full;
11265 if (!(bp->link_params.speed_cap_mask[idx] &
11266 PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))
11267 bp->port.supported[idx] &= ~(SUPPORTED_1000baseT_Half |
11268 SUPPORTED_1000baseT_Full);
11270 if (!(bp->link_params.speed_cap_mask[idx] &
11271 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
11272 bp->port.supported[idx] &= ~SUPPORTED_2500baseX_Full;
11274 if (!(bp->link_params.speed_cap_mask[idx] &
11275 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
11276 bp->port.supported[idx] &= ~SUPPORTED_10000baseT_Full;
11278 if (!(bp->link_params.speed_cap_mask[idx] &
11279 PORT_HW_CFG_SPEED_CAPABILITY_D0_20G))
11280 bp->port.supported[idx] &= ~SUPPORTED_20000baseKR2_Full;
11283 BNX2X_DEV_INFO("supported 0x%x 0x%x\n", bp->port.supported[0],
11284 bp->port.supported[1]);
11287 static void bnx2x_link_settings_requested(struct bnx2x *bp)
11289 u32 link_config, idx, cfg_size = 0;
11290 bp->port.advertising[0] = 0;
11291 bp->port.advertising[1] = 0;
11292 switch (bp->link_params.num_phys) {
11301 for (idx = 0; idx < cfg_size; idx++) {
11302 bp->link_params.req_duplex[idx] = DUPLEX_FULL;
11303 link_config = bp->port.link_config[idx];
11304 switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
11305 case PORT_FEATURE_LINK_SPEED_AUTO:
11306 if (bp->port.supported[idx] & SUPPORTED_Autoneg) {
11307 bp->link_params.req_line_speed[idx] =
11309 bp->port.advertising[idx] |=
11310 bp->port.supported[idx];
11311 if (bp->link_params.phy[EXT_PHY1].type ==
11312 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
11313 bp->port.advertising[idx] |=
11314 (SUPPORTED_100baseT_Half |
11315 SUPPORTED_100baseT_Full);
11317 /* force 10G, no AN */
11318 bp->link_params.req_line_speed[idx] =
11320 bp->port.advertising[idx] |=
11321 (ADVERTISED_10000baseT_Full |
11327 case PORT_FEATURE_LINK_SPEED_10M_FULL:
11328 if (bp->port.supported[idx] & SUPPORTED_10baseT_Full) {
11329 bp->link_params.req_line_speed[idx] =
11331 bp->port.advertising[idx] |=
11332 (ADVERTISED_10baseT_Full |
11335 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11337 bp->link_params.speed_cap_mask[idx]);
11342 case PORT_FEATURE_LINK_SPEED_10M_HALF:
11343 if (bp->port.supported[idx] & SUPPORTED_10baseT_Half) {
11344 bp->link_params.req_line_speed[idx] =
11346 bp->link_params.req_duplex[idx] =
11348 bp->port.advertising[idx] |=
11349 (ADVERTISED_10baseT_Half |
11352 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11354 bp->link_params.speed_cap_mask[idx]);
11359 case PORT_FEATURE_LINK_SPEED_100M_FULL:
11360 if (bp->port.supported[idx] &
11361 SUPPORTED_100baseT_Full) {
11362 bp->link_params.req_line_speed[idx] =
11364 bp->port.advertising[idx] |=
11365 (ADVERTISED_100baseT_Full |
11368 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11370 bp->link_params.speed_cap_mask[idx]);
11375 case PORT_FEATURE_LINK_SPEED_100M_HALF:
11376 if (bp->port.supported[idx] &
11377 SUPPORTED_100baseT_Half) {
11378 bp->link_params.req_line_speed[idx] =
11380 bp->link_params.req_duplex[idx] =
11382 bp->port.advertising[idx] |=
11383 (ADVERTISED_100baseT_Half |
11386 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11388 bp->link_params.speed_cap_mask[idx]);
11393 case PORT_FEATURE_LINK_SPEED_1G:
11394 if (bp->port.supported[idx] &
11395 SUPPORTED_1000baseT_Full) {
11396 bp->link_params.req_line_speed[idx] =
11398 bp->port.advertising[idx] |=
11399 (ADVERTISED_1000baseT_Full |
11401 } else if (bp->port.supported[idx] &
11402 SUPPORTED_1000baseKX_Full) {
11403 bp->link_params.req_line_speed[idx] =
11405 bp->port.advertising[idx] |=
11406 ADVERTISED_1000baseKX_Full;
11408 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11410 bp->link_params.speed_cap_mask[idx]);
11415 case PORT_FEATURE_LINK_SPEED_2_5G:
11416 if (bp->port.supported[idx] &
11417 SUPPORTED_2500baseX_Full) {
11418 bp->link_params.req_line_speed[idx] =
11420 bp->port.advertising[idx] |=
11421 (ADVERTISED_2500baseX_Full |
11424 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11426 bp->link_params.speed_cap_mask[idx]);
11431 case PORT_FEATURE_LINK_SPEED_10G_CX4:
11432 if (bp->port.supported[idx] &
11433 SUPPORTED_10000baseT_Full) {
11434 bp->link_params.req_line_speed[idx] =
11436 bp->port.advertising[idx] |=
11437 (ADVERTISED_10000baseT_Full |
11439 } else if (bp->port.supported[idx] &
11440 SUPPORTED_10000baseKR_Full) {
11441 bp->link_params.req_line_speed[idx] =
11443 bp->port.advertising[idx] |=
11444 (ADVERTISED_10000baseKR_Full |
11447 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11449 bp->link_params.speed_cap_mask[idx]);
11453 case PORT_FEATURE_LINK_SPEED_20G:
11454 bp->link_params.req_line_speed[idx] = SPEED_20000;
11458 BNX2X_ERR("NVRAM config error. BAD link speed link_config 0x%x\n",
11460 bp->link_params.req_line_speed[idx] =
11462 bp->port.advertising[idx] =
11463 bp->port.supported[idx];
11467 bp->link_params.req_flow_ctrl[idx] = (link_config &
11468 PORT_FEATURE_FLOW_CONTROL_MASK);
11469 if (bp->link_params.req_flow_ctrl[idx] ==
11470 BNX2X_FLOW_CTRL_AUTO) {
11471 if (!(bp->port.supported[idx] & SUPPORTED_Autoneg))
11472 bp->link_params.req_flow_ctrl[idx] =
11473 BNX2X_FLOW_CTRL_NONE;
11475 bnx2x_set_requested_fc(bp);
11478 BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x advertising 0x%x\n",
11479 bp->link_params.req_line_speed[idx],
11480 bp->link_params.req_duplex[idx],
11481 bp->link_params.req_flow_ctrl[idx],
11482 bp->port.advertising[idx]);
11486 static void bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi)
11488 __be16 mac_hi_be = cpu_to_be16(mac_hi);
11489 __be32 mac_lo_be = cpu_to_be32(mac_lo);
11490 memcpy(mac_buf, &mac_hi_be, sizeof(mac_hi_be));
11491 memcpy(mac_buf + sizeof(mac_hi_be), &mac_lo_be, sizeof(mac_lo_be));
11494 static void bnx2x_get_port_hwinfo(struct bnx2x *bp)
11496 int port = BP_PORT(bp);
11498 u32 ext_phy_type, ext_phy_config, eee_mode;
11500 bp->link_params.bp = bp;
11501 bp->link_params.port = port;
11503 bp->link_params.lane_config =
11504 SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
11506 bp->link_params.speed_cap_mask[0] =
11508 dev_info.port_hw_config[port].speed_capability_mask) &
11509 PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
11510 bp->link_params.speed_cap_mask[1] =
11512 dev_info.port_hw_config[port].speed_capability_mask2) &
11513 PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
11514 bp->port.link_config[0] =
11515 SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
11517 bp->port.link_config[1] =
11518 SHMEM_RD(bp, dev_info.port_feature_config[port].link_config2);
11520 bp->link_params.multi_phy_config =
11521 SHMEM_RD(bp, dev_info.port_hw_config[port].multi_phy_config);
11522 /* If the device is capable of WoL, set the default state according
11525 config = SHMEM_RD(bp, dev_info.port_feature_config[port].config);
11526 bp->wol = (!(bp->flags & NO_WOL_FLAG) &&
11527 (config & PORT_FEATURE_WOL_ENABLED));
11529 if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) ==
11530 PORT_FEAT_CFG_STORAGE_PERSONALITY_FCOE && !IS_MF(bp))
11531 bp->flags |= NO_ISCSI_FLAG;
11532 if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) ==
11533 PORT_FEAT_CFG_STORAGE_PERSONALITY_ISCSI && !(IS_MF(bp)))
11534 bp->flags |= NO_FCOE_FLAG;
11536 BNX2X_DEV_INFO("lane_config 0x%08x speed_cap_mask0 0x%08x link_config0 0x%08x\n",
11537 bp->link_params.lane_config,
11538 bp->link_params.speed_cap_mask[0],
11539 bp->port.link_config[0]);
11541 bp->link_params.switch_cfg = (bp->port.link_config[0] &
11542 PORT_FEATURE_CONNECTED_SWITCH_MASK);
11543 bnx2x_phy_probe(&bp->link_params);
11544 bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg);
11546 bnx2x_link_settings_requested(bp);
11549 * If connected directly, work with the internal PHY, otherwise, work
11550 * with the external PHY
11554 dev_info.port_hw_config[port].external_phy_config);
11555 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
11556 if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
11557 bp->mdio.prtad = bp->port.phy_addr;
11559 else if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
11560 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN))
11562 XGXS_EXT_PHY_ADDR(ext_phy_config);
11564 /* Configure link feature according to nvram value */
11565 eee_mode = (((SHMEM_RD(bp, dev_info.
11566 port_feature_config[port].eee_power_mode)) &
11567 PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >>
11568 PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT);
11569 if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) {
11570 bp->link_params.eee_mode = EEE_MODE_ADV_LPI |
11571 EEE_MODE_ENABLE_LPI |
11572 EEE_MODE_OUTPUT_TIME;
11574 bp->link_params.eee_mode = 0;
11578 void bnx2x_get_iscsi_info(struct bnx2x *bp)
11580 u32 no_flags = NO_ISCSI_FLAG;
11581 int port = BP_PORT(bp);
11582 u32 max_iscsi_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp,
11583 drv_lic_key[port].max_iscsi_conn);
11585 if (!CNIC_SUPPORT(bp)) {
11586 bp->flags |= no_flags;
11590 /* Get the number of maximum allowed iSCSI connections */
11591 bp->cnic_eth_dev.max_iscsi_conn =
11592 (max_iscsi_conn & BNX2X_MAX_ISCSI_INIT_CONN_MASK) >>
11593 BNX2X_MAX_ISCSI_INIT_CONN_SHIFT;
11595 BNX2X_DEV_INFO("max_iscsi_conn 0x%x\n",
11596 bp->cnic_eth_dev.max_iscsi_conn);
11599 * If maximum allowed number of connections is zero -
11600 * disable the feature.
11602 if (!bp->cnic_eth_dev.max_iscsi_conn)
11603 bp->flags |= no_flags;
11606 static void bnx2x_get_ext_wwn_info(struct bnx2x *bp, int func)
11609 bp->cnic_eth_dev.fcoe_wwn_port_name_hi =
11610 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_port_name_upper);
11611 bp->cnic_eth_dev.fcoe_wwn_port_name_lo =
11612 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_port_name_lower);
11615 bp->cnic_eth_dev.fcoe_wwn_node_name_hi =
11616 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_node_name_upper);
11617 bp->cnic_eth_dev.fcoe_wwn_node_name_lo =
11618 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_node_name_lower);
11621 static int bnx2x_shared_fcoe_funcs(struct bnx2x *bp)
11628 /* iterate over absolute function ids for this path: */
11629 for (fid = BP_PATH(bp); fid < E2_FUNC_MAX * 2; fid += 2) {
11630 if (IS_MF_SD(bp)) {
11631 u32 cfg = MF_CFG_RD(bp,
11632 func_mf_config[fid].config);
11634 if (!(cfg & FUNC_MF_CFG_FUNC_HIDE) &&
11635 ((cfg & FUNC_MF_CFG_PROTOCOL_MASK) ==
11636 FUNC_MF_CFG_PROTOCOL_FCOE))
11639 u32 cfg = MF_CFG_RD(bp,
11640 func_ext_config[fid].
11643 if ((cfg & MACP_FUNC_CFG_FLAGS_ENABLED) &&
11644 (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD))
11649 int port, port_cnt = CHIP_MODE_IS_4_PORT(bp) ? 2 : 1;
11651 for (port = 0; port < port_cnt; port++) {
11652 u32 lic = SHMEM_RD(bp,
11653 drv_lic_key[port].max_fcoe_conn) ^
11654 FW_ENCODE_32BIT_PATTERN;
11663 static void bnx2x_get_fcoe_info(struct bnx2x *bp)
11665 int port = BP_PORT(bp);
11666 int func = BP_ABS_FUNC(bp);
11667 u32 max_fcoe_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp,
11668 drv_lic_key[port].max_fcoe_conn);
11669 u8 num_fcoe_func = bnx2x_shared_fcoe_funcs(bp);
11671 if (!CNIC_SUPPORT(bp)) {
11672 bp->flags |= NO_FCOE_FLAG;
11676 /* Get the number of maximum allowed FCoE connections */
11677 bp->cnic_eth_dev.max_fcoe_conn =
11678 (max_fcoe_conn & BNX2X_MAX_FCOE_INIT_CONN_MASK) >>
11679 BNX2X_MAX_FCOE_INIT_CONN_SHIFT;
11681 /* Calculate the number of maximum allowed FCoE tasks */
11682 bp->cnic_eth_dev.max_fcoe_exchanges = MAX_NUM_FCOE_TASKS_PER_ENGINE;
11684 /* check if FCoE resources must be shared between different functions */
11686 bp->cnic_eth_dev.max_fcoe_exchanges /= num_fcoe_func;
11688 /* Read the WWN: */
11691 bp->cnic_eth_dev.fcoe_wwn_port_name_hi =
11693 dev_info.port_hw_config[port].
11694 fcoe_wwn_port_name_upper);
11695 bp->cnic_eth_dev.fcoe_wwn_port_name_lo =
11697 dev_info.port_hw_config[port].
11698 fcoe_wwn_port_name_lower);
11701 bp->cnic_eth_dev.fcoe_wwn_node_name_hi =
11703 dev_info.port_hw_config[port].
11704 fcoe_wwn_node_name_upper);
11705 bp->cnic_eth_dev.fcoe_wwn_node_name_lo =
11707 dev_info.port_hw_config[port].
11708 fcoe_wwn_node_name_lower);
11709 } else if (!IS_MF_SD(bp)) {
11710 /* Read the WWN info only if the FCoE feature is enabled for
11713 if (BNX2X_HAS_MF_EXT_PROTOCOL_FCOE(bp))
11714 bnx2x_get_ext_wwn_info(bp, func);
11716 if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp) && !CHIP_IS_E1x(bp))
11717 bnx2x_get_ext_wwn_info(bp, func);
11720 BNX2X_DEV_INFO("max_fcoe_conn 0x%x\n", bp->cnic_eth_dev.max_fcoe_conn);
11723 * If maximum allowed number of connections is zero -
11724 * disable the feature.
11726 if (!bp->cnic_eth_dev.max_fcoe_conn)
11727 bp->flags |= NO_FCOE_FLAG;
11730 static void bnx2x_get_cnic_info(struct bnx2x *bp)
11733 * iSCSI may be dynamically disabled but reading
11734 * info here we will decrease memory usage by driver
11735 * if the feature is disabled for good
11737 bnx2x_get_iscsi_info(bp);
11738 bnx2x_get_fcoe_info(bp);
11741 static void bnx2x_get_cnic_mac_hwinfo(struct bnx2x *bp)
11744 int func = BP_ABS_FUNC(bp);
11745 int port = BP_PORT(bp);
11746 u8 *iscsi_mac = bp->cnic_eth_dev.iscsi_mac;
11747 u8 *fip_mac = bp->fip_mac;
11750 /* iSCSI and FCoE NPAR MACs: if there is no either iSCSI or
11751 * FCoE MAC then the appropriate feature should be disabled.
11752 * In non SD mode features configuration comes from struct
11755 if (!IS_MF_SD(bp)) {
11756 u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg);
11757 if (cfg & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) {
11758 val2 = MF_CFG_RD(bp, func_ext_config[func].
11759 iscsi_mac_addr_upper);
11760 val = MF_CFG_RD(bp, func_ext_config[func].
11761 iscsi_mac_addr_lower);
11762 bnx2x_set_mac_buf(iscsi_mac, val, val2);
11764 ("Read iSCSI MAC: %pM\n", iscsi_mac);
11766 bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
11769 if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
11770 val2 = MF_CFG_RD(bp, func_ext_config[func].
11771 fcoe_mac_addr_upper);
11772 val = MF_CFG_RD(bp, func_ext_config[func].
11773 fcoe_mac_addr_lower);
11774 bnx2x_set_mac_buf(fip_mac, val, val2);
11776 ("Read FCoE L2 MAC: %pM\n", fip_mac);
11778 bp->flags |= NO_FCOE_FLAG;
11781 bp->mf_ext_config = cfg;
11783 } else { /* SD MODE */
11784 if (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp)) {
11785 /* use primary mac as iscsi mac */
11786 memcpy(iscsi_mac, bp->dev->dev_addr, ETH_ALEN);
11788 BNX2X_DEV_INFO("SD ISCSI MODE\n");
11790 ("Read iSCSI MAC: %pM\n", iscsi_mac);
11791 } else if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) {
11792 /* use primary mac as fip mac */
11793 memcpy(fip_mac, bp->dev->dev_addr, ETH_ALEN);
11794 BNX2X_DEV_INFO("SD FCoE MODE\n");
11796 ("Read FIP MAC: %pM\n", fip_mac);
11800 /* If this is a storage-only interface, use SAN mac as
11801 * primary MAC. Notice that for SD this is already the case,
11802 * as the SAN mac was copied from the primary MAC.
11804 if (IS_MF_FCOE_AFEX(bp))
11805 memcpy(bp->dev->dev_addr, fip_mac, ETH_ALEN);
11807 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].
11809 val = SHMEM_RD(bp, dev_info.port_hw_config[port].
11811 bnx2x_set_mac_buf(iscsi_mac, val, val2);
11813 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].
11814 fcoe_fip_mac_upper);
11815 val = SHMEM_RD(bp, dev_info.port_hw_config[port].
11816 fcoe_fip_mac_lower);
11817 bnx2x_set_mac_buf(fip_mac, val, val2);
11820 /* Disable iSCSI OOO if MAC configuration is invalid. */
11821 if (!is_valid_ether_addr(iscsi_mac)) {
11822 bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
11823 eth_zero_addr(iscsi_mac);
11826 /* Disable FCoE if MAC configuration is invalid. */
11827 if (!is_valid_ether_addr(fip_mac)) {
11828 bp->flags |= NO_FCOE_FLAG;
11829 eth_zero_addr(bp->fip_mac);
11833 static void bnx2x_get_mac_hwinfo(struct bnx2x *bp)
11836 int func = BP_ABS_FUNC(bp);
11837 int port = BP_PORT(bp);
11839 /* Zero primary MAC configuration */
11840 eth_zero_addr(bp->dev->dev_addr);
11842 if (BP_NOMCP(bp)) {
11843 BNX2X_ERROR("warning: random MAC workaround active\n");
11844 eth_hw_addr_random(bp->dev);
11845 } else if (IS_MF(bp)) {
11846 val2 = MF_CFG_RD(bp, func_mf_config[func].mac_upper);
11847 val = MF_CFG_RD(bp, func_mf_config[func].mac_lower);
11848 if ((val2 != FUNC_MF_CFG_UPPERMAC_DEFAULT) &&
11849 (val != FUNC_MF_CFG_LOWERMAC_DEFAULT))
11850 bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
11852 if (CNIC_SUPPORT(bp))
11853 bnx2x_get_cnic_mac_hwinfo(bp);
11855 /* in SF read MACs from port configuration */
11856 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
11857 val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
11858 bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
11860 if (CNIC_SUPPORT(bp))
11861 bnx2x_get_cnic_mac_hwinfo(bp);
11864 if (!BP_NOMCP(bp)) {
11865 /* Read physical port identifier from shmem */
11866 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
11867 val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
11868 bnx2x_set_mac_buf(bp->phys_port_id, val, val2);
11869 bp->flags |= HAS_PHYS_PORT_ID;
11872 memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN);
11874 if (!is_valid_ether_addr(bp->dev->dev_addr))
11875 dev_err(&bp->pdev->dev,
11876 "bad Ethernet MAC address configuration: %pM\n"
11877 "change it manually before bringing up the appropriate network interface\n",
11878 bp->dev->dev_addr);
11881 static bool bnx2x_get_dropless_info(struct bnx2x *bp)
11889 if (IS_MF(bp) && !CHIP_IS_E1x(bp)) {
11890 /* Take function: tmp = func */
11891 tmp = BP_ABS_FUNC(bp);
11892 cfg = MF_CFG_RD(bp, func_ext_config[tmp].func_cfg);
11893 cfg = !!(cfg & MACP_FUNC_CFG_PAUSE_ON_HOST_RING);
11895 /* Take port: tmp = port */
11898 dev_info.port_hw_config[tmp].generic_features);
11899 cfg = !!(cfg & PORT_HW_CFG_PAUSE_ON_HOST_RING_ENABLED);
11904 static void validate_set_si_mode(struct bnx2x *bp)
11906 u8 func = BP_ABS_FUNC(bp);
11909 val = MF_CFG_RD(bp, func_mf_config[func].mac_upper);
11911 /* check for legal mac (upper bytes) */
11912 if (val != 0xffff) {
11913 bp->mf_mode = MULTI_FUNCTION_SI;
11914 bp->mf_config[BP_VN(bp)] =
11915 MF_CFG_RD(bp, func_mf_config[func].config);
11917 BNX2X_DEV_INFO("illegal MAC address for SI\n");
11920 static int bnx2x_get_hwinfo(struct bnx2x *bp)
11922 int /*abs*/func = BP_ABS_FUNC(bp);
11924 u32 val = 0, val2 = 0;
11927 /* Validate that chip access is feasible */
11928 if (REG_RD(bp, MISC_REG_CHIP_NUM) == 0xffffffff) {
11929 dev_err(&bp->pdev->dev,
11930 "Chip read returns all Fs. Preventing probe from continuing\n");
11934 bnx2x_get_common_hwinfo(bp);
11937 * initialize IGU parameters
11939 if (CHIP_IS_E1x(bp)) {
11940 bp->common.int_block = INT_BLOCK_HC;
11942 bp->igu_dsb_id = DEF_SB_IGU_ID;
11943 bp->igu_base_sb = 0;
11945 bp->common.int_block = INT_BLOCK_IGU;
11947 /* do not allow device reset during IGU info processing */
11948 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
11950 val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
11952 if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
11955 BNX2X_DEV_INFO("FORCING Normal Mode\n");
11957 val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN);
11958 REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, val);
11959 REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x7f);
11961 while (tout && REG_RD(bp, IGU_REG_RESET_MEMORIES)) {
11963 usleep_range(1000, 2000);
11966 if (REG_RD(bp, IGU_REG_RESET_MEMORIES)) {
11967 dev_err(&bp->pdev->dev,
11968 "FORCING Normal Mode failed!!!\n");
11969 bnx2x_release_hw_lock(bp,
11970 HW_LOCK_RESOURCE_RESET);
11975 if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
11976 BNX2X_DEV_INFO("IGU Backward Compatible Mode\n");
11977 bp->common.int_block |= INT_BLOCK_MODE_BW_COMP;
11979 BNX2X_DEV_INFO("IGU Normal Mode\n");
11981 rc = bnx2x_get_igu_cam_info(bp);
11982 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
11988 * set base FW non-default (fast path) status block id, this value is
11989 * used to initialize the fw_sb_id saved on the fp/queue structure to
11990 * determine the id used by the FW.
11992 if (CHIP_IS_E1x(bp))
11993 bp->base_fw_ndsb = BP_PORT(bp) * FP_SB_MAX_E1x + BP_L_ID(bp);
11995 * 57712 - we currently use one FW SB per IGU SB (Rx and Tx of
11996 * the same queue are indicated on the same IGU SB). So we prefer
11997 * FW and IGU SBs to be the same value.
11999 bp->base_fw_ndsb = bp->igu_base_sb;
12001 BNX2X_DEV_INFO("igu_dsb_id %d igu_base_sb %d igu_sb_cnt %d\n"
12002 "base_fw_ndsb %d\n", bp->igu_dsb_id, bp->igu_base_sb,
12003 bp->igu_sb_cnt, bp->base_fw_ndsb);
12006 * Initialize MF configuration
12011 bp->mf_sub_mode = 0;
12013 mfw_vn = BP_FW_MB_IDX(bp);
12015 if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
12016 BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
12017 bp->common.shmem2_base, SHMEM2_RD(bp, size),
12018 (u32)offsetof(struct shmem2_region, mf_cfg_addr));
12020 if (SHMEM2_HAS(bp, mf_cfg_addr))
12021 bp->common.mf_cfg_base = SHMEM2_RD(bp, mf_cfg_addr);
12023 bp->common.mf_cfg_base = bp->common.shmem_base +
12024 offsetof(struct shmem_region, func_mb) +
12025 E1H_FUNC_MAX * sizeof(struct drv_func_mb);
12027 * get mf configuration:
12028 * 1. Existence of MF configuration
12029 * 2. MAC address must be legal (check only upper bytes)
12030 * for Switch-Independent mode;
12031 * OVLAN must be legal for Switch-Dependent mode
12032 * 3. SF_MODE configures specific MF mode
12034 if (bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) {
12035 /* get mf configuration */
12037 dev_info.shared_feature_config.config);
12038 val &= SHARED_FEAT_CFG_FORCE_SF_MODE_MASK;
12041 case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:
12042 validate_set_si_mode(bp);
12044 case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE:
12045 if ((!CHIP_IS_E1x(bp)) &&
12046 (MF_CFG_RD(bp, func_mf_config[func].
12047 mac_upper) != 0xffff) &&
12049 afex_driver_support))) {
12050 bp->mf_mode = MULTI_FUNCTION_AFEX;
12051 bp->mf_config[vn] = MF_CFG_RD(bp,
12052 func_mf_config[func].config);
12054 BNX2X_DEV_INFO("can not configure afex mode\n");
12057 case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED:
12058 /* get OV configuration */
12059 val = MF_CFG_RD(bp,
12060 func_mf_config[FUNC_0].e1hov_tag);
12061 val &= FUNC_MF_CFG_E1HOV_TAG_MASK;
12063 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
12064 bp->mf_mode = MULTI_FUNCTION_SD;
12065 bp->mf_config[vn] = MF_CFG_RD(bp,
12066 func_mf_config[func].config);
12068 BNX2X_DEV_INFO("illegal OV for SD\n");
12070 case SHARED_FEAT_CFG_FORCE_SF_MODE_BD_MODE:
12071 bp->mf_mode = MULTI_FUNCTION_SD;
12072 bp->mf_sub_mode = SUB_MF_MODE_BD;
12073 bp->mf_config[vn] =
12075 func_mf_config[func].config);
12077 if (SHMEM2_HAS(bp, mtu_size)) {
12078 int mtu_idx = BP_FW_MB_IDX(bp);
12082 mtu = SHMEM2_RD(bp, mtu_size[mtu_idx]);
12083 mtu_size = (u16)mtu;
12084 DP(NETIF_MSG_IFUP, "Read MTU size %04x [%08x]\n",
12087 /* if valid: update device mtu */
12088 if (((mtu_size + ETH_HLEN) >=
12089 ETH_MIN_PACKET_SIZE) &&
12091 ETH_MAX_JUMBO_PACKET_SIZE))
12092 bp->dev->mtu = mtu_size;
12095 case SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE:
12096 bp->mf_mode = MULTI_FUNCTION_SD;
12097 bp->mf_sub_mode = SUB_MF_MODE_UFP;
12098 bp->mf_config[vn] =
12100 func_mf_config[func].config);
12102 case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF:
12103 bp->mf_config[vn] = 0;
12105 case SHARED_FEAT_CFG_FORCE_SF_MODE_EXTENDED_MODE:
12106 val2 = SHMEM_RD(bp,
12107 dev_info.shared_hw_config.config_3);
12108 val2 &= SHARED_HW_CFG_EXTENDED_MF_MODE_MASK;
12110 case SHARED_HW_CFG_EXTENDED_MF_MODE_NPAR1_DOT_5:
12111 validate_set_si_mode(bp);
12113 SUB_MF_MODE_NPAR1_DOT_5;
12116 /* Unknown configuration */
12117 bp->mf_config[vn] = 0;
12118 BNX2X_DEV_INFO("unknown extended MF mode 0x%x\n",
12123 /* Unknown configuration: reset mf_config */
12124 bp->mf_config[vn] = 0;
12125 BNX2X_DEV_INFO("unknown MF mode 0x%x\n", val);
12129 BNX2X_DEV_INFO("%s function mode\n",
12130 IS_MF(bp) ? "multi" : "single");
12132 switch (bp->mf_mode) {
12133 case MULTI_FUNCTION_SD:
12134 val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) &
12135 FUNC_MF_CFG_E1HOV_TAG_MASK;
12136 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
12138 bp->path_has_ovlan = true;
12140 BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n",
12141 func, bp->mf_ov, bp->mf_ov);
12142 } else if ((bp->mf_sub_mode == SUB_MF_MODE_UFP) ||
12143 (bp->mf_sub_mode == SUB_MF_MODE_BD)) {
12144 dev_err(&bp->pdev->dev,
12145 "Unexpected - no valid MF OV for func %d in UFP/BD mode\n",
12147 bp->path_has_ovlan = true;
12149 dev_err(&bp->pdev->dev,
12150 "No valid MF OV for func %d, aborting\n",
12155 case MULTI_FUNCTION_AFEX:
12156 BNX2X_DEV_INFO("func %d is in MF afex mode\n", func);
12158 case MULTI_FUNCTION_SI:
12159 BNX2X_DEV_INFO("func %d is in MF switch-independent mode\n",
12164 dev_err(&bp->pdev->dev,
12165 "VN %d is in a single function mode, aborting\n",
12172 /* check if other port on the path needs ovlan:
12173 * Since MF configuration is shared between ports
12174 * Possible mixed modes are only
12175 * {SF, SI} {SF, SD} {SD, SF} {SI, SF}
12177 if (CHIP_MODE_IS_4_PORT(bp) &&
12178 !bp->path_has_ovlan &&
12180 bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) {
12181 u8 other_port = !BP_PORT(bp);
12182 u8 other_func = BP_PATH(bp) + 2*other_port;
12183 val = MF_CFG_RD(bp,
12184 func_mf_config[other_func].e1hov_tag);
12185 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT)
12186 bp->path_has_ovlan = true;
12190 /* adjust igu_sb_cnt to MF for E1H */
12191 if (CHIP_IS_E1H(bp) && IS_MF(bp))
12192 bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt, E1H_MAX_MF_SB_COUNT);
12195 bnx2x_get_port_hwinfo(bp);
12197 /* Get MAC addresses */
12198 bnx2x_get_mac_hwinfo(bp);
12200 bnx2x_get_cnic_info(bp);
12205 static void bnx2x_read_fwinfo(struct bnx2x *bp)
12207 int cnt, i, block_end, rodi;
12208 char vpd_start[BNX2X_VPD_LEN+1];
12209 char str_id_reg[VENDOR_ID_LEN+1];
12210 char str_id_cap[VENDOR_ID_LEN+1];
12212 char *vpd_extended_data = NULL;
12215 cnt = pci_read_vpd(bp->pdev, 0, BNX2X_VPD_LEN, vpd_start);
12216 memset(bp->fw_ver, 0, sizeof(bp->fw_ver));
12218 if (cnt < BNX2X_VPD_LEN)
12219 goto out_not_found;
12221 /* VPD RO tag should be first tag after identifier string, hence
12222 * we should be able to find it in first BNX2X_VPD_LEN chars
12224 i = pci_vpd_find_tag(vpd_start, 0, BNX2X_VPD_LEN,
12225 PCI_VPD_LRDT_RO_DATA);
12227 goto out_not_found;
12229 block_end = i + PCI_VPD_LRDT_TAG_SIZE +
12230 pci_vpd_lrdt_size(&vpd_start[i]);
12232 i += PCI_VPD_LRDT_TAG_SIZE;
12234 if (block_end > BNX2X_VPD_LEN) {
12235 vpd_extended_data = kmalloc(block_end, GFP_KERNEL);
12236 if (vpd_extended_data == NULL)
12237 goto out_not_found;
12239 /* read rest of vpd image into vpd_extended_data */
12240 memcpy(vpd_extended_data, vpd_start, BNX2X_VPD_LEN);
12241 cnt = pci_read_vpd(bp->pdev, BNX2X_VPD_LEN,
12242 block_end - BNX2X_VPD_LEN,
12243 vpd_extended_data + BNX2X_VPD_LEN);
12244 if (cnt < (block_end - BNX2X_VPD_LEN))
12245 goto out_not_found;
12246 vpd_data = vpd_extended_data;
12248 vpd_data = vpd_start;
12250 /* now vpd_data holds full vpd content in both cases */
12252 rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end,
12253 PCI_VPD_RO_KEYWORD_MFR_ID);
12255 goto out_not_found;
12257 len = pci_vpd_info_field_size(&vpd_data[rodi]);
12259 if (len != VENDOR_ID_LEN)
12260 goto out_not_found;
12262 rodi += PCI_VPD_INFO_FLD_HDR_SIZE;
12264 /* vendor specific info */
12265 snprintf(str_id_reg, VENDOR_ID_LEN + 1, "%04x", PCI_VENDOR_ID_DELL);
12266 snprintf(str_id_cap, VENDOR_ID_LEN + 1, "%04X", PCI_VENDOR_ID_DELL);
12267 if (!strncmp(str_id_reg, &vpd_data[rodi], VENDOR_ID_LEN) ||
12268 !strncmp(str_id_cap, &vpd_data[rodi], VENDOR_ID_LEN)) {
12270 rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end,
12271 PCI_VPD_RO_KEYWORD_VENDOR0);
12273 len = pci_vpd_info_field_size(&vpd_data[rodi]);
12275 rodi += PCI_VPD_INFO_FLD_HDR_SIZE;
12277 if (len < 32 && (len + rodi) <= BNX2X_VPD_LEN) {
12278 memcpy(bp->fw_ver, &vpd_data[rodi], len);
12279 bp->fw_ver[len] = ' ';
12282 kfree(vpd_extended_data);
12286 kfree(vpd_extended_data);
12290 static void bnx2x_set_modes_bitmap(struct bnx2x *bp)
12294 if (CHIP_REV_IS_FPGA(bp))
12295 SET_FLAGS(flags, MODE_FPGA);
12296 else if (CHIP_REV_IS_EMUL(bp))
12297 SET_FLAGS(flags, MODE_EMUL);
12299 SET_FLAGS(flags, MODE_ASIC);
12301 if (CHIP_MODE_IS_4_PORT(bp))
12302 SET_FLAGS(flags, MODE_PORT4);
12304 SET_FLAGS(flags, MODE_PORT2);
12306 if (CHIP_IS_E2(bp))
12307 SET_FLAGS(flags, MODE_E2);
12308 else if (CHIP_IS_E3(bp)) {
12309 SET_FLAGS(flags, MODE_E3);
12310 if (CHIP_REV(bp) == CHIP_REV_Ax)
12311 SET_FLAGS(flags, MODE_E3_A0);
12312 else /*if (CHIP_REV(bp) == CHIP_REV_Bx)*/
12313 SET_FLAGS(flags, MODE_E3_B0 | MODE_COS3);
12317 SET_FLAGS(flags, MODE_MF);
12318 switch (bp->mf_mode) {
12319 case MULTI_FUNCTION_SD:
12320 SET_FLAGS(flags, MODE_MF_SD);
12322 case MULTI_FUNCTION_SI:
12323 SET_FLAGS(flags, MODE_MF_SI);
12325 case MULTI_FUNCTION_AFEX:
12326 SET_FLAGS(flags, MODE_MF_AFEX);
12330 SET_FLAGS(flags, MODE_SF);
12332 #if defined(__LITTLE_ENDIAN)
12333 SET_FLAGS(flags, MODE_LITTLE_ENDIAN);
12334 #else /*(__BIG_ENDIAN)*/
12335 SET_FLAGS(flags, MODE_BIG_ENDIAN);
12337 INIT_MODE_FLAGS(bp) = flags;
12340 static int bnx2x_init_bp(struct bnx2x *bp)
12345 mutex_init(&bp->port.phy_mutex);
12346 mutex_init(&bp->fw_mb_mutex);
12347 mutex_init(&bp->drv_info_mutex);
12348 sema_init(&bp->stats_lock, 1);
12349 bp->drv_info_mng_owner = false;
12350 INIT_LIST_HEAD(&bp->vlan_reg);
12352 INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
12353 INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task);
12354 INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task);
12355 INIT_DELAYED_WORK(&bp->iov_task, bnx2x_iov_task);
12357 rc = bnx2x_get_hwinfo(bp);
12361 eth_zero_addr(bp->dev->dev_addr);
12364 bnx2x_set_modes_bitmap(bp);
12366 rc = bnx2x_alloc_mem_bp(bp);
12370 bnx2x_read_fwinfo(bp);
12372 func = BP_FUNC(bp);
12374 /* need to reset chip if undi was active */
12375 if (IS_PF(bp) && !BP_NOMCP(bp)) {
12378 SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
12379 DRV_MSG_SEQ_NUMBER_MASK;
12380 BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
12382 rc = bnx2x_prev_unload(bp);
12384 bnx2x_free_mem_bp(bp);
12389 if (CHIP_REV_IS_FPGA(bp))
12390 dev_err(&bp->pdev->dev, "FPGA detected\n");
12392 if (BP_NOMCP(bp) && (func == 0))
12393 dev_err(&bp->pdev->dev, "MCP disabled, must load devices in order!\n");
12395 bp->disable_tpa = disable_tpa;
12396 bp->disable_tpa |= !!IS_MF_STORAGE_ONLY(bp);
12397 /* Reduce memory usage in kdump environment by disabling TPA */
12398 bp->disable_tpa |= is_kdump_kernel();
12400 /* Set TPA flags */
12401 if (bp->disable_tpa) {
12402 bp->dev->hw_features &= ~NETIF_F_LRO;
12403 bp->dev->features &= ~NETIF_F_LRO;
12406 if (CHIP_IS_E1(bp))
12407 bp->dropless_fc = 0;
12409 bp->dropless_fc = dropless_fc | bnx2x_get_dropless_info(bp);
12413 bp->tx_ring_size = IS_MF_STORAGE_ONLY(bp) ? 0 : MAX_TX_AVAIL;
12415 bp->rx_ring_size = MAX_RX_AVAIL;
12417 /* make sure that the numbers are in the right granularity */
12418 bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
12419 bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR;
12421 bp->current_interval = CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ;
12423 init_timer(&bp->timer);
12424 bp->timer.expires = jiffies + bp->current_interval;
12425 bp->timer.data = (unsigned long) bp;
12426 bp->timer.function = bnx2x_timer;
12428 if (SHMEM2_HAS(bp, dcbx_lldp_params_offset) &&
12429 SHMEM2_HAS(bp, dcbx_lldp_dcbx_stat_offset) &&
12430 SHMEM2_HAS(bp, dcbx_en) &&
12431 SHMEM2_RD(bp, dcbx_lldp_params_offset) &&
12432 SHMEM2_RD(bp, dcbx_lldp_dcbx_stat_offset) &&
12433 SHMEM2_RD(bp, dcbx_en[BP_PORT(bp)])) {
12434 bnx2x_dcbx_set_state(bp, true, BNX2X_DCBX_ENABLED_ON_NEG_ON);
12435 bnx2x_dcbx_init_params(bp);
12437 bnx2x_dcbx_set_state(bp, false, BNX2X_DCBX_ENABLED_OFF);
12440 if (CHIP_IS_E1x(bp))
12441 bp->cnic_base_cl_id = FP_SB_MAX_E1x;
12443 bp->cnic_base_cl_id = FP_SB_MAX_E2;
12445 /* multiple tx priority */
12448 else if (CHIP_IS_E1x(bp))
12449 bp->max_cos = BNX2X_MULTI_TX_COS_E1X;
12450 else if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp))
12451 bp->max_cos = BNX2X_MULTI_TX_COS_E2_E3A0;
12452 else if (CHIP_IS_E3B0(bp))
12453 bp->max_cos = BNX2X_MULTI_TX_COS_E3B0;
12455 BNX2X_ERR("unknown chip %x revision %x\n",
12456 CHIP_NUM(bp), CHIP_REV(bp));
12457 BNX2X_DEV_INFO("set bp->max_cos to %d\n", bp->max_cos);
12459 /* We need at least one default status block for slow-path events,
12460 * second status block for the L2 queue, and a third status block for
12461 * CNIC if supported.
12464 bp->min_msix_vec_cnt = 1;
12465 else if (CNIC_SUPPORT(bp))
12466 bp->min_msix_vec_cnt = 3;
12467 else /* PF w/o cnic */
12468 bp->min_msix_vec_cnt = 2;
12469 BNX2X_DEV_INFO("bp->min_msix_vec_cnt %d", bp->min_msix_vec_cnt);
12471 bp->dump_preset_idx = 1;
12473 if (CHIP_IS_E3B0(bp))
12474 bp->flags |= PTP_SUPPORTED;
12479 /****************************************************************************
12480 * General service functions
12481 ****************************************************************************/
12484 * net_device service functions
12487 /* called with rtnl_lock */
12488 static int bnx2x_open(struct net_device *dev)
12490 struct bnx2x *bp = netdev_priv(dev);
12493 bp->stats_init = true;
12495 netif_carrier_off(dev);
12497 bnx2x_set_power_state(bp, PCI_D0);
12499 /* If parity had happen during the unload, then attentions
12500 * and/or RECOVERY_IN_PROGRES may still be set. In this case we
12501 * want the first function loaded on the current engine to
12502 * complete the recovery.
12503 * Parity recovery is only relevant for PF driver.
12506 int other_engine = BP_PATH(bp) ? 0 : 1;
12507 bool other_load_status, load_status;
12508 bool global = false;
12510 other_load_status = bnx2x_get_load_status(bp, other_engine);
12511 load_status = bnx2x_get_load_status(bp, BP_PATH(bp));
12512 if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) ||
12513 bnx2x_chk_parity_attn(bp, &global, true)) {
12515 /* If there are attentions and they are in a
12516 * global blocks, set the GLOBAL_RESET bit
12517 * regardless whether it will be this function
12518 * that will complete the recovery or not.
12521 bnx2x_set_reset_global(bp);
12523 /* Only the first function on the current
12524 * engine should try to recover in open. In case
12525 * of attentions in global blocks only the first
12526 * in the chip should try to recover.
12528 if ((!load_status &&
12529 (!global || !other_load_status)) &&
12530 bnx2x_trylock_leader_lock(bp) &&
12531 !bnx2x_leader_reset(bp)) {
12532 netdev_info(bp->dev,
12533 "Recovered in open\n");
12537 /* recovery has failed... */
12538 bnx2x_set_power_state(bp, PCI_D3hot);
12539 bp->recovery_state = BNX2X_RECOVERY_FAILED;
12541 BNX2X_ERR("Recovery flow hasn't been properly completed yet. Try again later.\n"
12542 "If you still see this message after a few retries then power cycle is required.\n");
12549 bp->recovery_state = BNX2X_RECOVERY_DONE;
12550 rc = bnx2x_nic_load(bp, LOAD_OPEN);
12554 #ifdef CONFIG_BNX2X_VXLAN
12556 vxlan_get_rx_port(dev);
12558 #if IS_ENABLED(CONFIG_BNX2X_GENEVE)
12560 geneve_get_rx_port(dev);
12566 /* called with rtnl_lock */
12567 static int bnx2x_close(struct net_device *dev)
12569 struct bnx2x *bp = netdev_priv(dev);
12571 /* Unload the driver, release IRQs */
12572 bnx2x_nic_unload(bp, UNLOAD_CLOSE, false);
12577 static int bnx2x_init_mcast_macs_list(struct bnx2x *bp,
12578 struct bnx2x_mcast_ramrod_params *p)
12580 int mc_count = netdev_mc_count(bp->dev);
12581 struct bnx2x_mcast_list_elem *mc_mac =
12582 kcalloc(mc_count, sizeof(*mc_mac), GFP_ATOMIC);
12583 struct netdev_hw_addr *ha;
12588 INIT_LIST_HEAD(&p->mcast_list);
12590 netdev_for_each_mc_addr(ha, bp->dev) {
12591 mc_mac->mac = bnx2x_mc_addr(ha);
12592 list_add_tail(&mc_mac->link, &p->mcast_list);
12596 p->mcast_list_len = mc_count;
12601 static void bnx2x_free_mcast_macs_list(
12602 struct bnx2x_mcast_ramrod_params *p)
12604 struct bnx2x_mcast_list_elem *mc_mac =
12605 list_first_entry(&p->mcast_list, struct bnx2x_mcast_list_elem,
12613 * bnx2x_set_uc_list - configure a new unicast MACs list.
12615 * @bp: driver handle
12617 * We will use zero (0) as a MAC type for these MACs.
12619 static int bnx2x_set_uc_list(struct bnx2x *bp)
12622 struct net_device *dev = bp->dev;
12623 struct netdev_hw_addr *ha;
12624 struct bnx2x_vlan_mac_obj *mac_obj = &bp->sp_objs->mac_obj;
12625 unsigned long ramrod_flags = 0;
12627 /* First schedule a cleanup up of old configuration */
12628 rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, false);
12630 BNX2X_ERR("Failed to schedule DELETE operations: %d\n", rc);
12634 netdev_for_each_uc_addr(ha, dev) {
12635 rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true,
12636 BNX2X_UC_LIST_MAC, &ramrod_flags);
12637 if (rc == -EEXIST) {
12639 "Failed to schedule ADD operations: %d\n", rc);
12640 /* do not treat adding same MAC as error */
12643 } else if (rc < 0) {
12645 BNX2X_ERR("Failed to schedule ADD operations: %d\n",
12651 /* Execute the pending commands */
12652 __set_bit(RAMROD_CONT, &ramrod_flags);
12653 return bnx2x_set_mac_one(bp, NULL, mac_obj, false /* don't care */,
12654 BNX2X_UC_LIST_MAC, &ramrod_flags);
12657 static int bnx2x_set_mc_list(struct bnx2x *bp)
12659 struct net_device *dev = bp->dev;
12660 struct bnx2x_mcast_ramrod_params rparam = {NULL};
12663 rparam.mcast_obj = &bp->mcast_obj;
12665 /* first, clear all configured multicast MACs */
12666 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
12668 BNX2X_ERR("Failed to clear multicast configuration: %d\n", rc);
12672 /* then, configure a new MACs list */
12673 if (netdev_mc_count(dev)) {
12674 rc = bnx2x_init_mcast_macs_list(bp, &rparam);
12676 BNX2X_ERR("Failed to create multicast MACs list: %d\n",
12681 /* Now add the new MACs */
12682 rc = bnx2x_config_mcast(bp, &rparam,
12683 BNX2X_MCAST_CMD_ADD);
12685 BNX2X_ERR("Failed to set a new multicast configuration: %d\n",
12688 bnx2x_free_mcast_macs_list(&rparam);
12694 /* If bp->state is OPEN, should be called with netif_addr_lock_bh() */
12695 static void bnx2x_set_rx_mode(struct net_device *dev)
12697 struct bnx2x *bp = netdev_priv(dev);
12699 if (bp->state != BNX2X_STATE_OPEN) {
12700 DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state);
12703 /* Schedule an SP task to handle rest of change */
12704 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_RX_MODE,
12709 void bnx2x_set_rx_mode_inner(struct bnx2x *bp)
12711 u32 rx_mode = BNX2X_RX_MODE_NORMAL;
12713 DP(NETIF_MSG_IFUP, "dev->flags = %x\n", bp->dev->flags);
12715 netif_addr_lock_bh(bp->dev);
12717 if (bp->dev->flags & IFF_PROMISC) {
12718 rx_mode = BNX2X_RX_MODE_PROMISC;
12719 } else if ((bp->dev->flags & IFF_ALLMULTI) ||
12720 ((netdev_mc_count(bp->dev) > BNX2X_MAX_MULTICAST) &&
12722 rx_mode = BNX2X_RX_MODE_ALLMULTI;
12725 /* some multicasts */
12726 if (bnx2x_set_mc_list(bp) < 0)
12727 rx_mode = BNX2X_RX_MODE_ALLMULTI;
12729 /* release bh lock, as bnx2x_set_uc_list might sleep */
12730 netif_addr_unlock_bh(bp->dev);
12731 if (bnx2x_set_uc_list(bp) < 0)
12732 rx_mode = BNX2X_RX_MODE_PROMISC;
12733 netif_addr_lock_bh(bp->dev);
12735 /* configuring mcast to a vf involves sleeping (when we
12736 * wait for the pf's response).
12738 bnx2x_schedule_sp_rtnl(bp,
12739 BNX2X_SP_RTNL_VFPF_MCAST, 0);
12743 bp->rx_mode = rx_mode;
12744 /* handle ISCSI SD mode */
12745 if (IS_MF_ISCSI_ONLY(bp))
12746 bp->rx_mode = BNX2X_RX_MODE_NONE;
12748 /* Schedule the rx_mode command */
12749 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) {
12750 set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state);
12751 netif_addr_unlock_bh(bp->dev);
12756 bnx2x_set_storm_rx_mode(bp);
12757 netif_addr_unlock_bh(bp->dev);
12759 /* VF will need to request the PF to make this change, and so
12760 * the VF needs to release the bottom-half lock prior to the
12761 * request (as it will likely require sleep on the VF side)
12763 netif_addr_unlock_bh(bp->dev);
12764 bnx2x_vfpf_storm_rx_mode(bp);
12768 /* called with rtnl_lock */
12769 static int bnx2x_mdio_read(struct net_device *netdev, int prtad,
12770 int devad, u16 addr)
12772 struct bnx2x *bp = netdev_priv(netdev);
12776 DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n",
12777 prtad, devad, addr);
12779 /* The HW expects different devad if CL22 is used */
12780 devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
12782 bnx2x_acquire_phy_lock(bp);
12783 rc = bnx2x_phy_read(&bp->link_params, prtad, devad, addr, &value);
12784 bnx2x_release_phy_lock(bp);
12785 DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc);
12792 /* called with rtnl_lock */
12793 static int bnx2x_mdio_write(struct net_device *netdev, int prtad, int devad,
12794 u16 addr, u16 value)
12796 struct bnx2x *bp = netdev_priv(netdev);
12800 "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x, value 0x%x\n",
12801 prtad, devad, addr, value);
12803 /* The HW expects different devad if CL22 is used */
12804 devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
12806 bnx2x_acquire_phy_lock(bp);
12807 rc = bnx2x_phy_write(&bp->link_params, prtad, devad, addr, value);
12808 bnx2x_release_phy_lock(bp);
12812 /* called with rtnl_lock */
12813 static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
12815 struct bnx2x *bp = netdev_priv(dev);
12816 struct mii_ioctl_data *mdio = if_mii(ifr);
12818 if (!netif_running(dev))
12822 case SIOCSHWTSTAMP:
12823 return bnx2x_hwtstamp_ioctl(bp, ifr);
12825 DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n",
12826 mdio->phy_id, mdio->reg_num, mdio->val_in);
12827 return mdio_mii_ioctl(&bp->mdio, mdio, cmd);
12831 #ifdef CONFIG_NET_POLL_CONTROLLER
12832 static void poll_bnx2x(struct net_device *dev)
12834 struct bnx2x *bp = netdev_priv(dev);
12837 for_each_eth_queue(bp, i) {
12838 struct bnx2x_fastpath *fp = &bp->fp[i];
12839 napi_schedule(&bnx2x_fp(bp, fp->index, napi));
12844 static int bnx2x_validate_addr(struct net_device *dev)
12846 struct bnx2x *bp = netdev_priv(dev);
12848 /* query the bulletin board for mac address configured by the PF */
12850 bnx2x_sample_bulletin(bp);
12852 if (!is_valid_ether_addr(dev->dev_addr)) {
12853 BNX2X_ERR("Non-valid Ethernet address\n");
12854 return -EADDRNOTAVAIL;
12859 static int bnx2x_get_phys_port_id(struct net_device *netdev,
12860 struct netdev_phys_item_id *ppid)
12862 struct bnx2x *bp = netdev_priv(netdev);
12864 if (!(bp->flags & HAS_PHYS_PORT_ID))
12865 return -EOPNOTSUPP;
12867 ppid->id_len = sizeof(bp->phys_port_id);
12868 memcpy(ppid->id, bp->phys_port_id, ppid->id_len);
12873 static netdev_features_t bnx2x_features_check(struct sk_buff *skb,
12874 struct net_device *dev,
12875 netdev_features_t features)
12877 features = vlan_features_check(skb, features);
12878 return vxlan_features_check(skb, features);
12881 static int __bnx2x_vlan_configure_vid(struct bnx2x *bp, u16 vid, bool add)
12886 unsigned long ramrod_flags = 0;
12888 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
12889 rc = bnx2x_set_vlan_one(bp, vid, &bp->sp_objs->vlan_obj,
12890 add, &ramrod_flags);
12892 rc = bnx2x_vfpf_update_vlan(bp, vid, bp->fp->index, add);
12898 int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp)
12900 struct bnx2x_vlan_entry *vlan;
12903 if (!bp->vlan_cnt) {
12904 DP(NETIF_MSG_IFUP, "No need to re-configure vlan filters\n");
12908 list_for_each_entry(vlan, &bp->vlan_reg, link) {
12909 /* Prepare for cleanup in case of errors */
12918 DP(NETIF_MSG_IFUP, "Re-configuring vlan 0x%04x\n", vlan->vid);
12920 rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true);
12922 BNX2X_ERR("Unable to configure VLAN %d\n", vlan->vid);
12932 static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
12934 struct bnx2x *bp = netdev_priv(dev);
12935 struct bnx2x_vlan_entry *vlan;
12939 if (!netif_running(bp->dev)) {
12941 "Ignoring VLAN configuration the interface is down\n");
12945 DP(NETIF_MSG_IFUP, "Adding VLAN %d\n", vid);
12947 vlan = kmalloc(sizeof(*vlan), GFP_KERNEL);
12952 if (bp->vlan_cnt > bp->vlan_credit && !bp->accept_any_vlan) {
12953 DP(NETIF_MSG_IFUP, "Accept all VLAN raised\n");
12954 bp->accept_any_vlan = true;
12956 bnx2x_set_rx_mode_inner(bp);
12958 bnx2x_vfpf_storm_rx_mode(bp);
12959 } else if (bp->vlan_cnt <= bp->vlan_credit) {
12960 rc = __bnx2x_vlan_configure_vid(bp, vid, true);
12968 list_add(&vlan->link, &bp->vlan_reg);
12974 DP(NETIF_MSG_IFUP, "Adding VLAN result %d\n", rc);
12979 static int bnx2x_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
12981 struct bnx2x *bp = netdev_priv(dev);
12982 struct bnx2x_vlan_entry *vlan;
12985 if (!netif_running(bp->dev)) {
12987 "Ignoring VLAN configuration the interface is down\n");
12991 DP(NETIF_MSG_IFUP, "Removing VLAN %d\n", vid);
12993 if (!bp->vlan_cnt) {
12994 BNX2X_ERR("Unable to kill VLAN %d\n", vid);
12998 list_for_each_entry(vlan, &bp->vlan_reg, link)
12999 if (vlan->vid == vid)
13002 if (vlan->vid != vid) {
13003 BNX2X_ERR("Unable to kill VLAN %d - not found\n", vid);
13008 rc = __bnx2x_vlan_configure_vid(bp, vid, false);
13010 list_del(&vlan->link);
13015 if (bp->vlan_cnt <= bp->vlan_credit && bp->accept_any_vlan) {
13016 /* Configure all non-configured entries */
13017 list_for_each_entry(vlan, &bp->vlan_reg, link) {
13021 rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true);
13023 BNX2X_ERR("Unable to config VLAN %d\n",
13027 DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n",
13031 DP(NETIF_MSG_IFUP, "Accept all VLAN Removed\n");
13032 bp->accept_any_vlan = false;
13034 bnx2x_set_rx_mode_inner(bp);
13036 bnx2x_vfpf_storm_rx_mode(bp);
13039 DP(NETIF_MSG_IFUP, "Removing VLAN result %d\n", rc);
13044 static const struct net_device_ops bnx2x_netdev_ops = {
13045 .ndo_open = bnx2x_open,
13046 .ndo_stop = bnx2x_close,
13047 .ndo_start_xmit = bnx2x_start_xmit,
13048 .ndo_select_queue = bnx2x_select_queue,
13049 .ndo_set_rx_mode = bnx2x_set_rx_mode,
13050 .ndo_set_mac_address = bnx2x_change_mac_addr,
13051 .ndo_validate_addr = bnx2x_validate_addr,
13052 .ndo_do_ioctl = bnx2x_ioctl,
13053 .ndo_change_mtu = bnx2x_change_mtu,
13054 .ndo_fix_features = bnx2x_fix_features,
13055 .ndo_set_features = bnx2x_set_features,
13056 .ndo_tx_timeout = bnx2x_tx_timeout,
13057 .ndo_vlan_rx_add_vid = bnx2x_vlan_rx_add_vid,
13058 .ndo_vlan_rx_kill_vid = bnx2x_vlan_rx_kill_vid,
13059 #ifdef CONFIG_NET_POLL_CONTROLLER
13060 .ndo_poll_controller = poll_bnx2x,
13062 .ndo_setup_tc = __bnx2x_setup_tc,
13063 #ifdef CONFIG_BNX2X_SRIOV
13064 .ndo_set_vf_mac = bnx2x_set_vf_mac,
13065 .ndo_set_vf_vlan = bnx2x_set_vf_vlan,
13066 .ndo_get_vf_config = bnx2x_get_vf_config,
13068 #ifdef NETDEV_FCOE_WWNN
13069 .ndo_fcoe_get_wwn = bnx2x_fcoe_get_wwn,
13072 .ndo_get_phys_port_id = bnx2x_get_phys_port_id,
13073 .ndo_set_vf_link_state = bnx2x_set_vf_link_state,
13074 .ndo_features_check = bnx2x_features_check,
13075 #ifdef CONFIG_BNX2X_VXLAN
13076 .ndo_add_vxlan_port = bnx2x_add_vxlan_port,
13077 .ndo_del_vxlan_port = bnx2x_del_vxlan_port,
13079 #if IS_ENABLED(CONFIG_BNX2X_GENEVE)
13080 .ndo_add_geneve_port = bnx2x_add_geneve_port,
13081 .ndo_del_geneve_port = bnx2x_del_geneve_port,
13085 static int bnx2x_set_coherency_mask(struct bnx2x *bp)
13087 struct device *dev = &bp->pdev->dev;
13089 if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)) != 0 &&
13090 dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)) != 0) {
13091 dev_err(dev, "System does not support DMA, aborting\n");
13098 static void bnx2x_disable_pcie_error_reporting(struct bnx2x *bp)
13100 if (bp->flags & AER_ENABLED) {
13101 pci_disable_pcie_error_reporting(bp->pdev);
13102 bp->flags &= ~AER_ENABLED;
13106 static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev,
13107 struct net_device *dev, unsigned long board_type)
13111 bool chip_is_e1x = (board_type == BCM57710 ||
13112 board_type == BCM57711 ||
13113 board_type == BCM57711E);
13115 SET_NETDEV_DEV(dev, &pdev->dev);
13120 rc = pci_enable_device(pdev);
13122 dev_err(&bp->pdev->dev,
13123 "Cannot enable PCI device, aborting\n");
13127 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
13128 dev_err(&bp->pdev->dev,
13129 "Cannot find PCI device base address, aborting\n");
13131 goto err_out_disable;
13134 if (IS_PF(bp) && !(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
13135 dev_err(&bp->pdev->dev, "Cannot find second PCI device base address, aborting\n");
13137 goto err_out_disable;
13140 pci_read_config_dword(pdev, PCICFG_REVISION_ID_OFFSET, &pci_cfg_dword);
13141 if ((pci_cfg_dword & PCICFG_REVESION_ID_MASK) ==
13142 PCICFG_REVESION_ID_ERROR_VAL) {
13143 pr_err("PCI device error, probably due to fan failure, aborting\n");
13145 goto err_out_disable;
13148 if (atomic_read(&pdev->enable_cnt) == 1) {
13149 rc = pci_request_regions(pdev, DRV_MODULE_NAME);
13151 dev_err(&bp->pdev->dev,
13152 "Cannot obtain PCI resources, aborting\n");
13153 goto err_out_disable;
13156 pci_set_master(pdev);
13157 pci_save_state(pdev);
13161 if (!pdev->pm_cap) {
13162 dev_err(&bp->pdev->dev,
13163 "Cannot find power management capability, aborting\n");
13165 goto err_out_release;
13169 if (!pci_is_pcie(pdev)) {
13170 dev_err(&bp->pdev->dev, "Not PCI Express, aborting\n");
13172 goto err_out_release;
13175 rc = bnx2x_set_coherency_mask(bp);
13177 goto err_out_release;
13179 dev->mem_start = pci_resource_start(pdev, 0);
13180 dev->base_addr = dev->mem_start;
13181 dev->mem_end = pci_resource_end(pdev, 0);
13183 dev->irq = pdev->irq;
13185 bp->regview = pci_ioremap_bar(pdev, 0);
13186 if (!bp->regview) {
13187 dev_err(&bp->pdev->dev,
13188 "Cannot map register space, aborting\n");
13190 goto err_out_release;
13193 /* In E1/E1H use pci device function given by kernel.
13194 * In E2/E3 read physical function from ME register since these chips
13195 * support Physical Device Assignment where kernel BDF maybe arbitrary
13196 * (depending on hypervisor).
13199 bp->pf_num = PCI_FUNC(pdev->devfn);
13202 pci_read_config_dword(bp->pdev,
13203 PCICFG_ME_REGISTER, &pci_cfg_dword);
13204 bp->pf_num = (u8)((pci_cfg_dword & ME_REG_ABS_PF_NUM) >>
13205 ME_REG_ABS_PF_NUM_SHIFT);
13207 BNX2X_DEV_INFO("me reg PF num: %d\n", bp->pf_num);
13209 /* clean indirect addresses */
13210 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
13211 PCICFG_VENDOR_ID_OFFSET);
13213 /* Set PCIe reset type to fundamental for EEH recovery */
13214 pdev->needs_freset = 1;
13216 /* AER (Advanced Error reporting) configuration */
13217 rc = pci_enable_pcie_error_reporting(pdev);
13219 bp->flags |= AER_ENABLED;
13221 BNX2X_DEV_INFO("Failed To configure PCIe AER [%d]\n", rc);
13224 * Clean the following indirect addresses for all functions since it
13225 * is not used by the driver.
13228 REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0);
13229 REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0);
13230 REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0);
13231 REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0);
13234 REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
13235 REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
13236 REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
13237 REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
13240 /* Enable internal target-read (in case we are probed after PF
13241 * FLR). Must be done prior to any BAR read access. Only for
13246 PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
13249 dev->watchdog_timeo = TX_TIMEOUT;
13251 dev->netdev_ops = &bnx2x_netdev_ops;
13252 bnx2x_set_ethtool_ops(bp, dev);
13254 dev->priv_flags |= IFF_UNICAST_FLT;
13256 dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
13257 NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
13258 NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO |
13259 NETIF_F_RXHASH | NETIF_F_HW_VLAN_CTAG_TX;
13260 if (!chip_is_e1x) {
13261 dev->hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL |
13262 NETIF_F_GSO_IPXIP4;
13263 dev->hw_enc_features =
13264 NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_SG |
13265 NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
13266 NETIF_F_GSO_IPXIP4 |
13267 NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL;
13270 dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
13271 NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
13273 /* VF with OLD Hypervisor or old PF do not support filtering */
13276 bp->accept_any_vlan = true;
13278 dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
13279 #ifdef CONFIG_BNX2X_SRIOV
13280 } else if (bp->acquire_resp.pfdev_info.pf_cap & PFVF_CAP_VLAN_FILTER) {
13281 dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
13285 dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX;
13286 dev->features |= NETIF_F_HIGHDMA;
13288 /* Add Loopback capability to the device */
13289 dev->hw_features |= NETIF_F_LOOPBACK;
13292 dev->dcbnl_ops = &bnx2x_dcbnl_ops;
13295 /* get_port_hwinfo() will set prtad and mmds properly */
13296 bp->mdio.prtad = MDIO_PRTAD_NONE;
13298 bp->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
13299 bp->mdio.dev = dev;
13300 bp->mdio.mdio_read = bnx2x_mdio_read;
13301 bp->mdio.mdio_write = bnx2x_mdio_write;
13306 if (atomic_read(&pdev->enable_cnt) == 1)
13307 pci_release_regions(pdev);
13310 pci_disable_device(pdev);
13316 static int bnx2x_check_firmware(struct bnx2x *bp)
13318 const struct firmware *firmware = bp->firmware;
13319 struct bnx2x_fw_file_hdr *fw_hdr;
13320 struct bnx2x_fw_file_section *sections;
13321 u32 offset, len, num_ops;
13322 __be16 *ops_offsets;
13326 if (firmware->size < sizeof(struct bnx2x_fw_file_hdr)) {
13327 BNX2X_ERR("Wrong FW size\n");
13331 fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data;
13332 sections = (struct bnx2x_fw_file_section *)fw_hdr;
13334 /* Make sure none of the offsets and sizes make us read beyond
13335 * the end of the firmware data */
13336 for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) {
13337 offset = be32_to_cpu(sections[i].offset);
13338 len = be32_to_cpu(sections[i].len);
13339 if (offset + len > firmware->size) {
13340 BNX2X_ERR("Section %d length is out of bounds\n", i);
13345 /* Likewise for the init_ops offsets */
13346 offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset);
13347 ops_offsets = (__force __be16 *)(firmware->data + offset);
13348 num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op);
13350 for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
13351 if (be16_to_cpu(ops_offsets[i]) > num_ops) {
13352 BNX2X_ERR("Section offset %d is out of bounds\n", i);
13357 /* Check FW version */
13358 offset = be32_to_cpu(fw_hdr->fw_version.offset);
13359 fw_ver = firmware->data + offset;
13360 if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) ||
13361 (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
13362 (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
13363 (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
13364 BNX2X_ERR("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n",
13365 fw_ver[0], fw_ver[1], fw_ver[2], fw_ver[3],
13366 BCM_5710_FW_MAJOR_VERSION,
13367 BCM_5710_FW_MINOR_VERSION,
13368 BCM_5710_FW_REVISION_VERSION,
13369 BCM_5710_FW_ENGINEERING_VERSION);
13376 static void be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
13378 const __be32 *source = (const __be32 *)_source;
13379 u32 *target = (u32 *)_target;
13382 for (i = 0; i < n/4; i++)
13383 target[i] = be32_to_cpu(source[i]);
13387 Ops array is stored in the following format:
13388 {op(8bit), offset(24bit, big endian), data(32bit, big endian)}
13390 static void bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n)
13392 const __be32 *source = (const __be32 *)_source;
13393 struct raw_op *target = (struct raw_op *)_target;
13396 for (i = 0, j = 0; i < n/8; i++, j += 2) {
13397 tmp = be32_to_cpu(source[j]);
13398 target[i].op = (tmp >> 24) & 0xff;
13399 target[i].offset = tmp & 0xffffff;
13400 target[i].raw_data = be32_to_cpu(source[j + 1]);
13404 /* IRO array is stored in the following format:
13405 * {base(24bit), m1(16bit), m2(16bit), m3(16bit), size(16bit) }
13407 static void bnx2x_prep_iro(const u8 *_source, u8 *_target, u32 n)
13409 const __be32 *source = (const __be32 *)_source;
13410 struct iro *target = (struct iro *)_target;
13413 for (i = 0, j = 0; i < n/sizeof(struct iro); i++) {
13414 target[i].base = be32_to_cpu(source[j]);
13416 tmp = be32_to_cpu(source[j]);
13417 target[i].m1 = (tmp >> 16) & 0xffff;
13418 target[i].m2 = tmp & 0xffff;
13420 tmp = be32_to_cpu(source[j]);
13421 target[i].m3 = (tmp >> 16) & 0xffff;
13422 target[i].size = tmp & 0xffff;
13427 static void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
13429 const __be16 *source = (const __be16 *)_source;
13430 u16 *target = (u16 *)_target;
13433 for (i = 0; i < n/2; i++)
13434 target[i] = be16_to_cpu(source[i]);
13437 #define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
13439 u32 len = be32_to_cpu(fw_hdr->arr.len); \
13440 bp->arr = kmalloc(len, GFP_KERNEL); \
13443 func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \
13444 (u8 *)bp->arr, len); \
13447 static int bnx2x_init_firmware(struct bnx2x *bp)
13449 const char *fw_file_name;
13450 struct bnx2x_fw_file_hdr *fw_hdr;
13456 if (CHIP_IS_E1(bp))
13457 fw_file_name = FW_FILE_NAME_E1;
13458 else if (CHIP_IS_E1H(bp))
13459 fw_file_name = FW_FILE_NAME_E1H;
13460 else if (!CHIP_IS_E1x(bp))
13461 fw_file_name = FW_FILE_NAME_E2;
13463 BNX2X_ERR("Unsupported chip revision\n");
13466 BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
13468 rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev);
13470 BNX2X_ERR("Can't load firmware file %s\n",
13472 goto request_firmware_exit;
13475 rc = bnx2x_check_firmware(bp);
13477 BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
13478 goto request_firmware_exit;
13481 fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
13483 /* Initialize the pointers to the init arrays */
13485 BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n);
13488 BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops);
13491 BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err,
13494 /* STORMs firmware */
13495 INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
13496 be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
13497 INIT_TSEM_PRAM_DATA(bp) = bp->firmware->data +
13498 be32_to_cpu(fw_hdr->tsem_pram_data.offset);
13499 INIT_USEM_INT_TABLE_DATA(bp) = bp->firmware->data +
13500 be32_to_cpu(fw_hdr->usem_int_table_data.offset);
13501 INIT_USEM_PRAM_DATA(bp) = bp->firmware->data +
13502 be32_to_cpu(fw_hdr->usem_pram_data.offset);
13503 INIT_XSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
13504 be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
13505 INIT_XSEM_PRAM_DATA(bp) = bp->firmware->data +
13506 be32_to_cpu(fw_hdr->xsem_pram_data.offset);
13507 INIT_CSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
13508 be32_to_cpu(fw_hdr->csem_int_table_data.offset);
13509 INIT_CSEM_PRAM_DATA(bp) = bp->firmware->data +
13510 be32_to_cpu(fw_hdr->csem_pram_data.offset);
13512 BNX2X_ALLOC_AND_SET(iro_arr, iro_alloc_err, bnx2x_prep_iro);
13517 kfree(bp->init_ops_offsets);
13518 init_offsets_alloc_err:
13519 kfree(bp->init_ops);
13520 init_ops_alloc_err:
13521 kfree(bp->init_data);
13522 request_firmware_exit:
13523 release_firmware(bp->firmware);
13524 bp->firmware = NULL;
13529 static void bnx2x_release_firmware(struct bnx2x *bp)
13531 kfree(bp->init_ops_offsets);
13532 kfree(bp->init_ops);
13533 kfree(bp->init_data);
13534 release_firmware(bp->firmware);
13535 bp->firmware = NULL;
13538 static struct bnx2x_func_sp_drv_ops bnx2x_func_sp_drv = {
13539 .init_hw_cmn_chip = bnx2x_init_hw_common_chip,
13540 .init_hw_cmn = bnx2x_init_hw_common,
13541 .init_hw_port = bnx2x_init_hw_port,
13542 .init_hw_func = bnx2x_init_hw_func,
13544 .reset_hw_cmn = bnx2x_reset_common,
13545 .reset_hw_port = bnx2x_reset_port,
13546 .reset_hw_func = bnx2x_reset_func,
13548 .gunzip_init = bnx2x_gunzip_init,
13549 .gunzip_end = bnx2x_gunzip_end,
13551 .init_fw = bnx2x_init_firmware,
13552 .release_fw = bnx2x_release_firmware,
13555 void bnx2x__init_func_obj(struct bnx2x *bp)
13557 /* Prepare DMAE related driver resources */
13558 bnx2x_setup_dmae(bp);
13560 bnx2x_init_func_obj(bp, &bp->func_obj,
13561 bnx2x_sp(bp, func_rdata),
13562 bnx2x_sp_mapping(bp, func_rdata),
13563 bnx2x_sp(bp, func_afex_rdata),
13564 bnx2x_sp_mapping(bp, func_afex_rdata),
13565 &bnx2x_func_sp_drv);
13568 /* must be called after sriov-enable */
13569 static int bnx2x_set_qm_cid_count(struct bnx2x *bp)
13571 int cid_count = BNX2X_L2_MAX_CID(bp);
13574 cid_count += BNX2X_VF_CIDS;
13576 if (CNIC_SUPPORT(bp))
13577 cid_count += CNIC_CID_MAX;
13579 return roundup(cid_count, QM_CID_ROUND);
13583 * bnx2x_get_num_none_def_sbs - return the number of none default SBs
13588 static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev, int cnic_cnt)
13594 * If MSI-X is not supported - return number of SBs needed to support
13595 * one fast path queue: one FP queue + SB for CNIC
13597 if (!pdev->msix_cap) {
13598 dev_info(&pdev->dev, "no msix capability found\n");
13599 return 1 + cnic_cnt;
13601 dev_info(&pdev->dev, "msix capability found\n");
13604 * The value in the PCI configuration space is the index of the last
13605 * entry, namely one less than the actual size of the table, which is
13606 * exactly what we want to return from this function: number of all SBs
13607 * without the default SB.
13608 * For VFs there is no default SB, then we return (index+1).
13610 pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &control);
13612 index = control & PCI_MSIX_FLAGS_QSIZE;
13617 static int set_max_cos_est(int chip_id)
13623 return BNX2X_MULTI_TX_COS_E1X;
13626 return BNX2X_MULTI_TX_COS_E2_E3A0;
13631 case BCM57840_4_10:
13632 case BCM57840_2_20:
13638 return BNX2X_MULTI_TX_COS_E3B0;
13646 pr_err("Unknown board_type (%d), aborting\n", chip_id);
13651 static int set_is_vf(int chip_id)
13665 /* nig_tsgen registers relative address */
13666 #define tsgen_ctrl 0x0
13667 #define tsgen_freecount 0x10
13668 #define tsgen_synctime_t0 0x20
13669 #define tsgen_offset_t0 0x28
13670 #define tsgen_drift_t0 0x30
13671 #define tsgen_synctime_t1 0x58
13672 #define tsgen_offset_t1 0x60
13673 #define tsgen_drift_t1 0x68
13675 /* FW workaround for setting drift */
13676 static int bnx2x_send_update_drift_ramrod(struct bnx2x *bp, int drift_dir,
13677 int best_val, int best_period)
13679 struct bnx2x_func_state_params func_params = {NULL};
13680 struct bnx2x_func_set_timesync_params *set_timesync_params =
13681 &func_params.params.set_timesync;
13683 /* Prepare parameters for function state transitions */
13684 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
13685 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags);
13687 func_params.f_obj = &bp->func_obj;
13688 func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC;
13690 /* Function parameters */
13691 set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_SET;
13692 set_timesync_params->offset_cmd = TS_OFFSET_KEEP;
13693 set_timesync_params->add_sub_drift_adjust_value =
13694 drift_dir ? TS_ADD_VALUE : TS_SUB_VALUE;
13695 set_timesync_params->drift_adjust_value = best_val;
13696 set_timesync_params->drift_adjust_period = best_period;
13698 return bnx2x_func_state_change(bp, &func_params);
13701 static int bnx2x_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
13703 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info);
13706 int val, period, period1, period2, dif, dif1, dif2;
13707 int best_dif = BNX2X_MAX_PHC_DRIFT, best_period = 0, best_val = 0;
13709 DP(BNX2X_MSG_PTP, "PTP adjfreq called, ppb = %d\n", ppb);
13711 if (!netif_running(bp->dev)) {
13713 "PTP adjfreq called while the interface is down\n");
13724 best_period = 0x1FFFFFF;
13725 } else if (ppb >= BNX2X_MAX_PHC_DRIFT) {
13729 /* Changed not to allow val = 8, 16, 24 as these values
13730 * are not supported in workaround.
13732 for (val = 0; val <= 31; val++) {
13733 if ((val & 0x7) == 0)
13735 period1 = val * 1000000 / ppb;
13736 period2 = period1 + 1;
13738 dif1 = ppb - (val * 1000000 / period1);
13740 dif1 = BNX2X_MAX_PHC_DRIFT;
13743 dif2 = ppb - (val * 1000000 / period2);
13746 dif = (dif1 < dif2) ? dif1 : dif2;
13747 period = (dif1 < dif2) ? period1 : period2;
13748 if (dif < best_dif) {
13751 best_period = period;
13756 rc = bnx2x_send_update_drift_ramrod(bp, drift_dir, best_val,
13759 BNX2X_ERR("Failed to set drift\n");
13763 DP(BNX2X_MSG_PTP, "Configured val = %d, period = %d\n", best_val,
13769 static int bnx2x_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
13771 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info);
13773 DP(BNX2X_MSG_PTP, "PTP adjtime called, delta = %llx\n", delta);
13775 timecounter_adjtime(&bp->timecounter, delta);
13780 static int bnx2x_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
13782 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info);
13785 ns = timecounter_read(&bp->timecounter);
13787 DP(BNX2X_MSG_PTP, "PTP gettime called, ns = %llu\n", ns);
13789 *ts = ns_to_timespec64(ns);
13794 static int bnx2x_ptp_settime(struct ptp_clock_info *ptp,
13795 const struct timespec64 *ts)
13797 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info);
13800 ns = timespec64_to_ns(ts);
13802 DP(BNX2X_MSG_PTP, "PTP settime called, ns = %llu\n", ns);
13804 /* Re-init the timecounter */
13805 timecounter_init(&bp->timecounter, &bp->cyclecounter, ns);
13810 /* Enable (or disable) ancillary features of the phc subsystem */
13811 static int bnx2x_ptp_enable(struct ptp_clock_info *ptp,
13812 struct ptp_clock_request *rq, int on)
13814 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info);
13816 BNX2X_ERR("PHC ancillary features are not supported\n");
13820 static void bnx2x_register_phc(struct bnx2x *bp)
13822 /* Fill the ptp_clock_info struct and register PTP clock*/
13823 bp->ptp_clock_info.owner = THIS_MODULE;
13824 snprintf(bp->ptp_clock_info.name, 16, "%s", bp->dev->name);
13825 bp->ptp_clock_info.max_adj = BNX2X_MAX_PHC_DRIFT; /* In PPB */
13826 bp->ptp_clock_info.n_alarm = 0;
13827 bp->ptp_clock_info.n_ext_ts = 0;
13828 bp->ptp_clock_info.n_per_out = 0;
13829 bp->ptp_clock_info.pps = 0;
13830 bp->ptp_clock_info.adjfreq = bnx2x_ptp_adjfreq;
13831 bp->ptp_clock_info.adjtime = bnx2x_ptp_adjtime;
13832 bp->ptp_clock_info.gettime64 = bnx2x_ptp_gettime;
13833 bp->ptp_clock_info.settime64 = bnx2x_ptp_settime;
13834 bp->ptp_clock_info.enable = bnx2x_ptp_enable;
13836 bp->ptp_clock = ptp_clock_register(&bp->ptp_clock_info, &bp->pdev->dev);
13837 if (IS_ERR(bp->ptp_clock)) {
13838 bp->ptp_clock = NULL;
13839 BNX2X_ERR("PTP clock registeration failed\n");
13843 static int bnx2x_init_one(struct pci_dev *pdev,
13844 const struct pci_device_id *ent)
13846 struct net_device *dev = NULL;
13848 enum pcie_link_width pcie_width;
13849 enum pci_bus_speed pcie_speed;
13850 int rc, max_non_def_sbs;
13851 int rx_count, tx_count, rss_count, doorbell_size;
13856 /* Management FW 'remembers' living interfaces. Allow it some time
13857 * to forget previously living interfaces, allowing a proper re-load.
13859 if (is_kdump_kernel()) {
13860 ktime_t now = ktime_get_boottime();
13861 ktime_t fw_ready_time = ktime_set(5, 0);
13863 if (ktime_before(now, fw_ready_time))
13864 msleep(ktime_ms_delta(fw_ready_time, now));
13867 /* An estimated maximum supported CoS number according to the chip
13869 * We will try to roughly estimate the maximum number of CoSes this chip
13870 * may support in order to minimize the memory allocated for Tx
13871 * netdev_queue's. This number will be accurately calculated during the
13872 * initialization of bp->max_cos based on the chip versions AND chip
13873 * revision in the bnx2x_init_bp().
13875 max_cos_est = set_max_cos_est(ent->driver_data);
13876 if (max_cos_est < 0)
13877 return max_cos_est;
13878 is_vf = set_is_vf(ent->driver_data);
13879 cnic_cnt = is_vf ? 0 : 1;
13881 max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev, cnic_cnt);
13883 /* add another SB for VF as it has no default SB */
13884 max_non_def_sbs += is_vf ? 1 : 0;
13886 /* Maximum number of RSS queues: one IGU SB goes to CNIC */
13887 rss_count = max_non_def_sbs - cnic_cnt;
13892 /* Maximum number of netdev Rx queues: RSS + FCoE L2 */
13893 rx_count = rss_count + cnic_cnt;
13895 /* Maximum number of netdev Tx queues:
13896 * Maximum TSS queues * Maximum supported number of CoS + FCoE L2
13898 tx_count = rss_count * max_cos_est + cnic_cnt;
13900 /* dev zeroed in init_etherdev */
13901 dev = alloc_etherdev_mqs(sizeof(*bp), tx_count, rx_count);
13905 bp = netdev_priv(dev);
13909 bp->flags |= IS_VF_FLAG;
13911 bp->igu_sb_cnt = max_non_def_sbs;
13912 bp->igu_base_addr = IS_VF(bp) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM;
13913 bp->msg_enable = debug;
13914 bp->cnic_support = cnic_cnt;
13915 bp->cnic_probe = bnx2x_cnic_probe;
13917 pci_set_drvdata(pdev, dev);
13919 rc = bnx2x_init_dev(bp, pdev, dev, ent->driver_data);
13925 BNX2X_DEV_INFO("This is a %s function\n",
13926 IS_PF(bp) ? "physical" : "virtual");
13927 BNX2X_DEV_INFO("Cnic support is %s\n", CNIC_SUPPORT(bp) ? "on" : "off");
13928 BNX2X_DEV_INFO("Max num of status blocks %d\n", max_non_def_sbs);
13929 BNX2X_DEV_INFO("Allocated netdev with %d tx and %d rx queues\n",
13930 tx_count, rx_count);
13932 rc = bnx2x_init_bp(bp);
13934 goto init_one_exit;
13936 /* Map doorbells here as we need the real value of bp->max_cos which
13937 * is initialized in bnx2x_init_bp() to determine the number of
13941 bp->doorbells = bnx2x_vf_doorbells(bp);
13942 rc = bnx2x_vf_pci_alloc(bp);
13944 goto init_one_exit;
13946 doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT);
13947 if (doorbell_size > pci_resource_len(pdev, 2)) {
13948 dev_err(&bp->pdev->dev,
13949 "Cannot map doorbells, bar size too small, aborting\n");
13951 goto init_one_exit;
13953 bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2),
13956 if (!bp->doorbells) {
13957 dev_err(&bp->pdev->dev,
13958 "Cannot map doorbell space, aborting\n");
13960 goto init_one_exit;
13964 rc = bnx2x_vfpf_acquire(bp, tx_count, rx_count);
13966 goto init_one_exit;
13969 /* Enable SRIOV if capability found in configuration space */
13970 rc = bnx2x_iov_init_one(bp, int_mode, BNX2X_MAX_NUM_OF_VFS);
13972 goto init_one_exit;
13974 /* calc qm_cid_count */
13975 bp->qm_cid_count = bnx2x_set_qm_cid_count(bp);
13976 BNX2X_DEV_INFO("qm_cid_count %d\n", bp->qm_cid_count);
13978 /* disable FCOE L2 queue for E1x*/
13979 if (CHIP_IS_E1x(bp))
13980 bp->flags |= NO_FCOE_FLAG;
13982 /* Set bp->num_queues for MSI-X mode*/
13983 bnx2x_set_num_queues(bp);
13985 /* Configure interrupt mode: try to enable MSI-X/MSI if
13988 rc = bnx2x_set_int_mode(bp);
13990 dev_err(&pdev->dev, "Cannot set interrupts\n");
13991 goto init_one_exit;
13993 BNX2X_DEV_INFO("set interrupts successfully\n");
13995 /* register the net device */
13996 rc = register_netdev(dev);
13998 dev_err(&pdev->dev, "Cannot register net device\n");
13999 goto init_one_exit;
14001 BNX2X_DEV_INFO("device name after netdev register %s\n", dev->name);
14003 if (!NO_FCOE(bp)) {
14004 /* Add storage MAC address */
14006 dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
14009 if (pcie_get_minimum_link(bp->pdev, &pcie_speed, &pcie_width) ||
14010 pcie_speed == PCI_SPEED_UNKNOWN ||
14011 pcie_width == PCIE_LNK_WIDTH_UNKNOWN)
14012 BNX2X_DEV_INFO("Failed to determine PCI Express Bandwidth\n");
14015 "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
14016 board_info[ent->driver_data].name,
14017 (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
14019 pcie_speed == PCIE_SPEED_2_5GT ? "2.5GHz" :
14020 pcie_speed == PCIE_SPEED_5_0GT ? "5.0GHz" :
14021 pcie_speed == PCIE_SPEED_8_0GT ? "8.0GHz" :
14023 dev->base_addr, bp->pdev->irq, dev->dev_addr);
14025 bnx2x_register_phc(bp);
14027 if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
14028 bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED);
14033 bnx2x_disable_pcie_error_reporting(bp);
14036 iounmap(bp->regview);
14038 if (IS_PF(bp) && bp->doorbells)
14039 iounmap(bp->doorbells);
14043 if (atomic_read(&pdev->enable_cnt) == 1)
14044 pci_release_regions(pdev);
14046 pci_disable_device(pdev);
14051 static void __bnx2x_remove(struct pci_dev *pdev,
14052 struct net_device *dev,
14054 bool remove_netdev)
14056 if (bp->ptp_clock) {
14057 ptp_clock_unregister(bp->ptp_clock);
14058 bp->ptp_clock = NULL;
14061 /* Delete storage MAC address */
14062 if (!NO_FCOE(bp)) {
14064 dev_addr_del(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
14069 /* Delete app tlvs from dcbnl */
14070 bnx2x_dcbnl_update_applist(bp, true);
14075 (bp->flags & BC_SUPPORTS_RMMOD_CMD))
14076 bnx2x_fw_command(bp, DRV_MSG_CODE_RMMOD, 0);
14078 /* Close the interface - either directly or implicitly */
14079 if (remove_netdev) {
14080 unregister_netdev(dev);
14087 bnx2x_iov_remove_one(bp);
14089 /* Power on: we can't let PCI layer write to us while we are in D3 */
14091 bnx2x_set_power_state(bp, PCI_D0);
14092 bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_NOT_LOADED);
14094 /* Set endianity registers to reset values in case next driver
14095 * boots in different endianty environment.
14097 bnx2x_reset_endianity(bp);
14100 /* Disable MSI/MSI-X */
14101 bnx2x_disable_msi(bp);
14105 bnx2x_set_power_state(bp, PCI_D3hot);
14107 /* Make sure RESET task is not scheduled before continuing */
14108 cancel_delayed_work_sync(&bp->sp_rtnl_task);
14110 /* send message via vfpf channel to release the resources of this vf */
14112 bnx2x_vfpf_release(bp);
14114 /* Assumes no further PCIe PM changes will occur */
14115 if (system_state == SYSTEM_POWER_OFF) {
14116 pci_wake_from_d3(pdev, bp->wol);
14117 pci_set_power_state(pdev, PCI_D3hot);
14120 bnx2x_disable_pcie_error_reporting(bp);
14121 if (remove_netdev) {
14123 iounmap(bp->regview);
14125 /* For vfs, doorbells are part of the regview and were unmapped
14126 * along with it. FW is only loaded by PF.
14130 iounmap(bp->doorbells);
14132 bnx2x_release_firmware(bp);
14134 bnx2x_vf_pci_dealloc(bp);
14136 bnx2x_free_mem_bp(bp);
14140 if (atomic_read(&pdev->enable_cnt) == 1)
14141 pci_release_regions(pdev);
14143 pci_disable_device(pdev);
14147 static void bnx2x_remove_one(struct pci_dev *pdev)
14149 struct net_device *dev = pci_get_drvdata(pdev);
14153 dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
14156 bp = netdev_priv(dev);
14158 __bnx2x_remove(pdev, dev, bp, true);
14161 static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
14163 bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
14165 bp->rx_mode = BNX2X_RX_MODE_NONE;
14167 if (CNIC_LOADED(bp))
14168 bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD);
14171 bnx2x_tx_disable(bp);
14172 /* Delete all NAPI objects */
14173 bnx2x_del_all_napi(bp);
14174 if (CNIC_LOADED(bp))
14175 bnx2x_del_all_napi_cnic(bp);
14176 netdev_reset_tc(bp->dev);
14178 del_timer_sync(&bp->timer);
14179 cancel_delayed_work_sync(&bp->sp_task);
14180 cancel_delayed_work_sync(&bp->period_task);
14182 if (!down_timeout(&bp->stats_lock, HZ / 10)) {
14183 bp->stats_state = STATS_STATE_DISABLED;
14184 up(&bp->stats_lock);
14187 bnx2x_save_statistics(bp);
14189 netif_carrier_off(bp->dev);
14195 * bnx2x_io_error_detected - called when PCI error is detected
14196 * @pdev: Pointer to PCI device
14197 * @state: The current pci connection state
14199 * This function is called after a PCI bus error affecting
14200 * this device has been detected.
14202 static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev,
14203 pci_channel_state_t state)
14205 struct net_device *dev = pci_get_drvdata(pdev);
14206 struct bnx2x *bp = netdev_priv(dev);
14210 BNX2X_ERR("IO error detected\n");
14212 netif_device_detach(dev);
14214 if (state == pci_channel_io_perm_failure) {
14216 return PCI_ERS_RESULT_DISCONNECT;
14219 if (netif_running(dev))
14220 bnx2x_eeh_nic_unload(bp);
14222 bnx2x_prev_path_mark_eeh(bp);
14224 pci_disable_device(pdev);
14228 /* Request a slot reset */
14229 return PCI_ERS_RESULT_NEED_RESET;
14233 * bnx2x_io_slot_reset - called after the PCI bus has been reset
14234 * @pdev: Pointer to PCI device
14236 * Restart the card from scratch, as if from a cold-boot.
14238 static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
14240 struct net_device *dev = pci_get_drvdata(pdev);
14241 struct bnx2x *bp = netdev_priv(dev);
14245 BNX2X_ERR("IO slot reset initializing...\n");
14246 if (pci_enable_device(pdev)) {
14247 dev_err(&pdev->dev,
14248 "Cannot re-enable PCI device after reset\n");
14250 return PCI_ERS_RESULT_DISCONNECT;
14253 pci_set_master(pdev);
14254 pci_restore_state(pdev);
14255 pci_save_state(pdev);
14257 if (netif_running(dev))
14258 bnx2x_set_power_state(bp, PCI_D0);
14260 if (netif_running(dev)) {
14261 BNX2X_ERR("IO slot reset --> driver unload\n");
14263 /* MCP should have been reset; Need to wait for validity */
14264 bnx2x_init_shmem(bp);
14266 if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) {
14270 drv_capabilities_flag[BP_FW_MB_IDX(bp)]);
14271 SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)],
14272 v & ~DRV_FLAGS_CAPABILITIES_LOADED_L2);
14274 bnx2x_drain_tx_queues(bp);
14275 bnx2x_send_unload_req(bp, UNLOAD_RECOVERY);
14276 bnx2x_netif_stop(bp, 1);
14277 bnx2x_free_irq(bp);
14279 /* Report UNLOAD_DONE to MCP */
14280 bnx2x_send_unload_done(bp, true);
14285 bnx2x_prev_unload(bp);
14287 /* We should have reseted the engine, so It's fair to
14288 * assume the FW will no longer write to the bnx2x driver.
14290 bnx2x_squeeze_objects(bp);
14291 bnx2x_free_skbs(bp);
14292 for_each_rx_queue(bp, i)
14293 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
14294 bnx2x_free_fp_mem(bp);
14295 bnx2x_free_mem(bp);
14297 bp->state = BNX2X_STATE_CLOSED;
14302 /* If AER, perform cleanup of the PCIe registers */
14303 if (bp->flags & AER_ENABLED) {
14304 if (pci_cleanup_aer_uncorrect_error_status(pdev))
14305 BNX2X_ERR("pci_cleanup_aer_uncorrect_error_status failed\n");
14307 DP(NETIF_MSG_HW, "pci_cleanup_aer_uncorrect_error_status succeeded\n");
14310 return PCI_ERS_RESULT_RECOVERED;
14314 * bnx2x_io_resume - called when traffic can start flowing again
14315 * @pdev: Pointer to PCI device
14317 * This callback is called when the error recovery driver tells us that
14318 * its OK to resume normal operation.
14320 static void bnx2x_io_resume(struct pci_dev *pdev)
14322 struct net_device *dev = pci_get_drvdata(pdev);
14323 struct bnx2x *bp = netdev_priv(dev);
14325 if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
14326 netdev_err(bp->dev, "Handling parity error recovery. Try again later\n");
14332 bp->fw_seq = SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
14333 DRV_MSG_SEQ_NUMBER_MASK;
14335 if (netif_running(dev))
14336 bnx2x_nic_load(bp, LOAD_NORMAL);
14338 netif_device_attach(dev);
14343 static const struct pci_error_handlers bnx2x_err_handler = {
14344 .error_detected = bnx2x_io_error_detected,
14345 .slot_reset = bnx2x_io_slot_reset,
14346 .resume = bnx2x_io_resume,
14349 static void bnx2x_shutdown(struct pci_dev *pdev)
14351 struct net_device *dev = pci_get_drvdata(pdev);
14357 bp = netdev_priv(dev);
14362 netif_device_detach(dev);
14365 /* Don't remove the netdevice, as there are scenarios which will cause
14366 * the kernel to hang, e.g., when trying to remove bnx2i while the
14367 * rootfs is mounted from SAN.
14369 __bnx2x_remove(pdev, dev, bp, false);
14372 static struct pci_driver bnx2x_pci_driver = {
14373 .name = DRV_MODULE_NAME,
14374 .id_table = bnx2x_pci_tbl,
14375 .probe = bnx2x_init_one,
14376 .remove = bnx2x_remove_one,
14377 .suspend = bnx2x_suspend,
14378 .resume = bnx2x_resume,
14379 .err_handler = &bnx2x_err_handler,
14380 #ifdef CONFIG_BNX2X_SRIOV
14381 .sriov_configure = bnx2x_sriov_configure,
14383 .shutdown = bnx2x_shutdown,
14386 static int __init bnx2x_init(void)
14390 pr_info("%s", version);
14392 bnx2x_wq = create_singlethread_workqueue("bnx2x");
14393 if (bnx2x_wq == NULL) {
14394 pr_err("Cannot create workqueue\n");
14397 bnx2x_iov_wq = create_singlethread_workqueue("bnx2x_iov");
14398 if (!bnx2x_iov_wq) {
14399 pr_err("Cannot create iov workqueue\n");
14400 destroy_workqueue(bnx2x_wq);
14404 ret = pci_register_driver(&bnx2x_pci_driver);
14406 pr_err("Cannot register driver\n");
14407 destroy_workqueue(bnx2x_wq);
14408 destroy_workqueue(bnx2x_iov_wq);
14413 static void __exit bnx2x_cleanup(void)
14415 struct list_head *pos, *q;
14417 pci_unregister_driver(&bnx2x_pci_driver);
14419 destroy_workqueue(bnx2x_wq);
14420 destroy_workqueue(bnx2x_iov_wq);
14422 /* Free globally allocated resources */
14423 list_for_each_safe(pos, q, &bnx2x_prev_list) {
14424 struct bnx2x_prev_path_list *tmp =
14425 list_entry(pos, struct bnx2x_prev_path_list, list);
14431 void bnx2x_notify_link_changed(struct bnx2x *bp)
14433 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + BP_FUNC(bp)*sizeof(u32), 1);
14436 module_init(bnx2x_init);
14437 module_exit(bnx2x_cleanup);
14440 * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s).
14442 * @bp: driver handle
14443 * @set: set or clear the CAM entry
14445 * This function will wait until the ramrod completion returns.
14446 * Return 0 if success, -ENODEV if ramrod doesn't return.
14448 static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp)
14450 unsigned long ramrod_flags = 0;
14452 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
14453 return bnx2x_set_mac_one(bp, bp->cnic_eth_dev.iscsi_mac,
14454 &bp->iscsi_l2_mac_obj, true,
14455 BNX2X_ISCSI_ETH_MAC, &ramrod_flags);
14458 /* count denotes the number of new completions we have seen */
14459 static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count)
14461 struct eth_spe *spe;
14462 int cxt_index, cxt_offset;
14464 #ifdef BNX2X_STOP_ON_ERROR
14465 if (unlikely(bp->panic))
14469 spin_lock_bh(&bp->spq_lock);
14470 BUG_ON(bp->cnic_spq_pending < count);
14471 bp->cnic_spq_pending -= count;
14473 for (; bp->cnic_kwq_pending; bp->cnic_kwq_pending--) {
14474 u16 type = (le16_to_cpu(bp->cnic_kwq_cons->hdr.type)
14475 & SPE_HDR_CONN_TYPE) >>
14476 SPE_HDR_CONN_TYPE_SHIFT;
14477 u8 cmd = (le32_to_cpu(bp->cnic_kwq_cons->hdr.conn_and_cmd_data)
14478 >> SPE_HDR_CMD_ID_SHIFT) & 0xff;
14480 /* Set validation for iSCSI L2 client before sending SETUP
14483 if (type == ETH_CONNECTION_TYPE) {
14484 if (cmd == RAMROD_CMD_ID_ETH_CLIENT_SETUP) {
14485 cxt_index = BNX2X_ISCSI_ETH_CID(bp) /
14487 cxt_offset = BNX2X_ISCSI_ETH_CID(bp) -
14488 (cxt_index * ILT_PAGE_CIDS);
14489 bnx2x_set_ctx_validation(bp,
14490 &bp->context[cxt_index].
14491 vcxt[cxt_offset].eth,
14492 BNX2X_ISCSI_ETH_CID(bp));
14497 * There may be not more than 8 L2, not more than 8 L5 SPEs
14498 * and in the air. We also check that number of outstanding
14499 * COMMON ramrods is not more than the EQ and SPQ can
14502 if (type == ETH_CONNECTION_TYPE) {
14503 if (!atomic_read(&bp->cq_spq_left))
14506 atomic_dec(&bp->cq_spq_left);
14507 } else if (type == NONE_CONNECTION_TYPE) {
14508 if (!atomic_read(&bp->eq_spq_left))
14511 atomic_dec(&bp->eq_spq_left);
14512 } else if ((type == ISCSI_CONNECTION_TYPE) ||
14513 (type == FCOE_CONNECTION_TYPE)) {
14514 if (bp->cnic_spq_pending >=
14515 bp->cnic_eth_dev.max_kwqe_pending)
14518 bp->cnic_spq_pending++;
14520 BNX2X_ERR("Unknown SPE type: %d\n", type);
14525 spe = bnx2x_sp_get_next(bp);
14526 *spe = *bp->cnic_kwq_cons;
14528 DP(BNX2X_MSG_SP, "pending on SPQ %d, on KWQ %d count %d\n",
14529 bp->cnic_spq_pending, bp->cnic_kwq_pending, count);
14531 if (bp->cnic_kwq_cons == bp->cnic_kwq_last)
14532 bp->cnic_kwq_cons = bp->cnic_kwq;
14534 bp->cnic_kwq_cons++;
14536 bnx2x_sp_prod_update(bp);
14537 spin_unlock_bh(&bp->spq_lock);
14540 static int bnx2x_cnic_sp_queue(struct net_device *dev,
14541 struct kwqe_16 *kwqes[], u32 count)
14543 struct bnx2x *bp = netdev_priv(dev);
14546 #ifdef BNX2X_STOP_ON_ERROR
14547 if (unlikely(bp->panic)) {
14548 BNX2X_ERR("Can't post to SP queue while panic\n");
14553 if ((bp->recovery_state != BNX2X_RECOVERY_DONE) &&
14554 (bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) {
14555 BNX2X_ERR("Handling parity error recovery. Try again later\n");
14559 spin_lock_bh(&bp->spq_lock);
14561 for (i = 0; i < count; i++) {
14562 struct eth_spe *spe = (struct eth_spe *)kwqes[i];
14564 if (bp->cnic_kwq_pending == MAX_SP_DESC_CNT)
14567 *bp->cnic_kwq_prod = *spe;
14569 bp->cnic_kwq_pending++;
14571 DP(BNX2X_MSG_SP, "L5 SPQE %x %x %x:%x pos %d\n",
14572 spe->hdr.conn_and_cmd_data, spe->hdr.type,
14573 spe->data.update_data_addr.hi,
14574 spe->data.update_data_addr.lo,
14575 bp->cnic_kwq_pending);
14577 if (bp->cnic_kwq_prod == bp->cnic_kwq_last)
14578 bp->cnic_kwq_prod = bp->cnic_kwq;
14580 bp->cnic_kwq_prod++;
14583 spin_unlock_bh(&bp->spq_lock);
14585 if (bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending)
14586 bnx2x_cnic_sp_post(bp, 0);
14591 static int bnx2x_cnic_ctl_send(struct bnx2x *bp, struct cnic_ctl_info *ctl)
14593 struct cnic_ops *c_ops;
14596 mutex_lock(&bp->cnic_mutex);
14597 c_ops = rcu_dereference_protected(bp->cnic_ops,
14598 lockdep_is_held(&bp->cnic_mutex));
14600 rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
14601 mutex_unlock(&bp->cnic_mutex);
14606 static int bnx2x_cnic_ctl_send_bh(struct bnx2x *bp, struct cnic_ctl_info *ctl)
14608 struct cnic_ops *c_ops;
14612 c_ops = rcu_dereference(bp->cnic_ops);
14614 rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
14621 * for commands that have no data
14623 int bnx2x_cnic_notify(struct bnx2x *bp, int cmd)
14625 struct cnic_ctl_info ctl = {0};
14629 return bnx2x_cnic_ctl_send(bp, &ctl);
14632 static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err)
14634 struct cnic_ctl_info ctl = {0};
14636 /* first we tell CNIC and only then we count this as a completion */
14637 ctl.cmd = CNIC_CTL_COMPLETION_CMD;
14638 ctl.data.comp.cid = cid;
14639 ctl.data.comp.error = err;
14641 bnx2x_cnic_ctl_send_bh(bp, &ctl);
14642 bnx2x_cnic_sp_post(bp, 0);
14645 /* Called with netif_addr_lock_bh() taken.
14646 * Sets an rx_mode config for an iSCSI ETH client.
14648 * Completion should be checked outside.
14650 static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start)
14652 unsigned long accept_flags = 0, ramrod_flags = 0;
14653 u8 cl_id = bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX);
14654 int sched_state = BNX2X_FILTER_ISCSI_ETH_STOP_SCHED;
14657 /* Start accepting on iSCSI L2 ring. Accept all multicasts
14658 * because it's the only way for UIO Queue to accept
14659 * multicasts (in non-promiscuous mode only one Queue per
14660 * function will receive multicast packets (leading in our
14663 __set_bit(BNX2X_ACCEPT_UNICAST, &accept_flags);
14664 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept_flags);
14665 __set_bit(BNX2X_ACCEPT_BROADCAST, &accept_flags);
14666 __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags);
14668 /* Clear STOP_PENDING bit if START is requested */
14669 clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &bp->sp_state);
14671 sched_state = BNX2X_FILTER_ISCSI_ETH_START_SCHED;
14673 /* Clear START_PENDING bit if STOP is requested */
14674 clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &bp->sp_state);
14676 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state))
14677 set_bit(sched_state, &bp->sp_state);
14679 __set_bit(RAMROD_RX, &ramrod_flags);
14680 bnx2x_set_q_rx_mode(bp, cl_id, 0, accept_flags, 0,
14685 static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl)
14687 struct bnx2x *bp = netdev_priv(dev);
14690 switch (ctl->cmd) {
14691 case DRV_CTL_CTXTBL_WR_CMD: {
14692 u32 index = ctl->data.io.offset;
14693 dma_addr_t addr = ctl->data.io.dma_addr;
14695 bnx2x_ilt_wr(bp, index, addr);
14699 case DRV_CTL_RET_L5_SPQ_CREDIT_CMD: {
14700 int count = ctl->data.credit.credit_count;
14702 bnx2x_cnic_sp_post(bp, count);
14706 /* rtnl_lock is held. */
14707 case DRV_CTL_START_L2_CMD: {
14708 struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
14709 unsigned long sp_bits = 0;
14711 /* Configure the iSCSI classification object */
14712 bnx2x_init_mac_obj(bp, &bp->iscsi_l2_mac_obj,
14713 cp->iscsi_l2_client_id,
14714 cp->iscsi_l2_cid, BP_FUNC(bp),
14715 bnx2x_sp(bp, mac_rdata),
14716 bnx2x_sp_mapping(bp, mac_rdata),
14717 BNX2X_FILTER_MAC_PENDING,
14718 &bp->sp_state, BNX2X_OBJ_TYPE_RX,
14721 /* Set iSCSI MAC address */
14722 rc = bnx2x_set_iscsi_eth_mac_addr(bp);
14729 /* Start accepting on iSCSI L2 ring */
14731 netif_addr_lock_bh(dev);
14732 bnx2x_set_iscsi_eth_rx_mode(bp, true);
14733 netif_addr_unlock_bh(dev);
14735 /* bits to wait on */
14736 __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits);
14737 __set_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &sp_bits);
14739 if (!bnx2x_wait_sp_comp(bp, sp_bits))
14740 BNX2X_ERR("rx_mode completion timed out!\n");
14745 /* rtnl_lock is held. */
14746 case DRV_CTL_STOP_L2_CMD: {
14747 unsigned long sp_bits = 0;
14749 /* Stop accepting on iSCSI L2 ring */
14750 netif_addr_lock_bh(dev);
14751 bnx2x_set_iscsi_eth_rx_mode(bp, false);
14752 netif_addr_unlock_bh(dev);
14754 /* bits to wait on */
14755 __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits);
14756 __set_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &sp_bits);
14758 if (!bnx2x_wait_sp_comp(bp, sp_bits))
14759 BNX2X_ERR("rx_mode completion timed out!\n");
14764 /* Unset iSCSI L2 MAC */
14765 rc = bnx2x_del_all_macs(bp, &bp->iscsi_l2_mac_obj,
14766 BNX2X_ISCSI_ETH_MAC, true);
14769 case DRV_CTL_RET_L2_SPQ_CREDIT_CMD: {
14770 int count = ctl->data.credit.credit_count;
14772 smp_mb__before_atomic();
14773 atomic_add(count, &bp->cq_spq_left);
14774 smp_mb__after_atomic();
14777 case DRV_CTL_ULP_REGISTER_CMD: {
14778 int ulp_type = ctl->data.register_data.ulp_type;
14780 if (CHIP_IS_E3(bp)) {
14781 int idx = BP_FW_MB_IDX(bp);
14782 u32 cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]);
14783 int path = BP_PATH(bp);
14784 int port = BP_PORT(bp);
14786 u32 scratch_offset;
14789 /* first write capability to shmem2 */
14790 if (ulp_type == CNIC_ULP_ISCSI)
14791 cap |= DRV_FLAGS_CAPABILITIES_LOADED_ISCSI;
14792 else if (ulp_type == CNIC_ULP_FCOE)
14793 cap |= DRV_FLAGS_CAPABILITIES_LOADED_FCOE;
14794 SHMEM2_WR(bp, drv_capabilities_flag[idx], cap);
14796 if ((ulp_type != CNIC_ULP_FCOE) ||
14797 (!SHMEM2_HAS(bp, ncsi_oem_data_addr)) ||
14798 (!(bp->flags & BC_SUPPORTS_FCOE_FEATURES)))
14801 /* if reached here - should write fcoe capabilities */
14802 scratch_offset = SHMEM2_RD(bp, ncsi_oem_data_addr);
14803 if (!scratch_offset)
14805 scratch_offset += offsetof(struct glob_ncsi_oem_data,
14806 fcoe_features[path][port]);
14807 host_addr = (u32 *) &(ctl->data.register_data.
14809 for (i = 0; i < sizeof(struct fcoe_capabilities);
14811 REG_WR(bp, scratch_offset + i,
14812 *(host_addr + i/4));
14814 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0);
14818 case DRV_CTL_ULP_UNREGISTER_CMD: {
14819 int ulp_type = ctl->data.ulp_type;
14821 if (CHIP_IS_E3(bp)) {
14822 int idx = BP_FW_MB_IDX(bp);
14825 cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]);
14826 if (ulp_type == CNIC_ULP_ISCSI)
14827 cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_ISCSI;
14828 else if (ulp_type == CNIC_ULP_FCOE)
14829 cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_FCOE;
14830 SHMEM2_WR(bp, drv_capabilities_flag[idx], cap);
14832 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0);
14837 BNX2X_ERR("unknown command %x\n", ctl->cmd);
14841 /* For storage-only interfaces, change driver state */
14842 if (IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp)) {
14843 switch (ctl->drv_state) {
14847 bnx2x_set_os_driver_state(bp,
14848 OS_DRIVER_STATE_ACTIVE);
14851 bnx2x_set_os_driver_state(bp,
14852 OS_DRIVER_STATE_DISABLED);
14855 bnx2x_set_os_driver_state(bp,
14856 OS_DRIVER_STATE_NOT_LOADED);
14859 BNX2X_ERR("Unknown cnic driver state: %d\n", ctl->drv_state);
14866 static int bnx2x_get_fc_npiv(struct net_device *dev,
14867 struct cnic_fc_npiv_tbl *cnic_tbl)
14869 struct bnx2x *bp = netdev_priv(dev);
14870 struct bdn_fc_npiv_tbl *tbl = NULL;
14871 u32 offset, entries;
14875 if (!SHMEM2_HAS(bp, fc_npiv_nvram_tbl_addr[0]))
14878 DP(BNX2X_MSG_MCP, "About to read the FC-NPIV table\n");
14880 tbl = kmalloc(sizeof(*tbl), GFP_KERNEL);
14882 BNX2X_ERR("Failed to allocate fc_npiv table\n");
14886 offset = SHMEM2_RD(bp, fc_npiv_nvram_tbl_addr[BP_PORT(bp)]);
14888 DP(BNX2X_MSG_MCP, "No FC-NPIV in NVRAM\n");
14891 DP(BNX2X_MSG_MCP, "Offset of FC-NPIV in NVRAM: %08x\n", offset);
14893 /* Read the table contents from nvram */
14894 if (bnx2x_nvram_read(bp, offset, (u8 *)tbl, sizeof(*tbl))) {
14895 BNX2X_ERR("Failed to read FC-NPIV table\n");
14899 /* Since bnx2x_nvram_read() returns data in be32, we need to convert
14900 * the number of entries back to cpu endianness.
14902 entries = tbl->fc_npiv_cfg.num_of_npiv;
14903 entries = (__force u32)be32_to_cpu((__force __be32)entries);
14904 tbl->fc_npiv_cfg.num_of_npiv = entries;
14906 if (!tbl->fc_npiv_cfg.num_of_npiv) {
14908 "No FC-NPIV table [valid, simply not present]\n");
14910 } else if (tbl->fc_npiv_cfg.num_of_npiv > MAX_NUMBER_NPIV) {
14911 BNX2X_ERR("FC-NPIV table with bad length 0x%08x\n",
14912 tbl->fc_npiv_cfg.num_of_npiv);
14915 DP(BNX2X_MSG_MCP, "Read 0x%08x entries from NVRAM\n",
14916 tbl->fc_npiv_cfg.num_of_npiv);
14919 /* Copy the data into cnic-provided struct */
14920 cnic_tbl->count = tbl->fc_npiv_cfg.num_of_npiv;
14921 for (i = 0; i < cnic_tbl->count; i++) {
14922 memcpy(cnic_tbl->wwpn[i], tbl->settings[i].npiv_wwpn, 8);
14923 memcpy(cnic_tbl->wwnn[i], tbl->settings[i].npiv_wwnn, 8);
14932 void bnx2x_setup_cnic_irq_info(struct bnx2x *bp)
14934 struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
14936 if (bp->flags & USING_MSIX_FLAG) {
14937 cp->drv_state |= CNIC_DRV_STATE_USING_MSIX;
14938 cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX;
14939 cp->irq_arr[0].vector = bp->msix_table[1].vector;
14941 cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX;
14942 cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX;
14944 if (!CHIP_IS_E1x(bp))
14945 cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e2_sb;
14947 cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e1x_sb;
14949 cp->irq_arr[0].status_blk_num = bnx2x_cnic_fw_sb_id(bp);
14950 cp->irq_arr[0].status_blk_num2 = bnx2x_cnic_igu_sb_id(bp);
14951 cp->irq_arr[1].status_blk = bp->def_status_blk;
14952 cp->irq_arr[1].status_blk_num = DEF_SB_ID;
14953 cp->irq_arr[1].status_blk_num2 = DEF_SB_IGU_ID;
14958 void bnx2x_setup_cnic_info(struct bnx2x *bp)
14960 struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
14962 cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) +
14963 bnx2x_cid_ilt_lines(bp);
14964 cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS;
14965 cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp);
14966 cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp);
14968 DP(NETIF_MSG_IFUP, "BNX2X_1st_NON_L2_ETH_CID(bp) %x, cp->starting_cid %x, cp->fcoe_init_cid %x, cp->iscsi_l2_cid %x\n",
14969 BNX2X_1st_NON_L2_ETH_CID(bp), cp->starting_cid, cp->fcoe_init_cid,
14972 if (NO_ISCSI_OOO(bp))
14973 cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO;
14976 static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops,
14979 struct bnx2x *bp = netdev_priv(dev);
14980 struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
14983 DP(NETIF_MSG_IFUP, "Register_cnic called\n");
14986 BNX2X_ERR("NULL ops received\n");
14990 if (!CNIC_SUPPORT(bp)) {
14991 BNX2X_ERR("Can't register CNIC when not supported\n");
14992 return -EOPNOTSUPP;
14995 if (!CNIC_LOADED(bp)) {
14996 rc = bnx2x_load_cnic(bp);
14998 BNX2X_ERR("CNIC-related load failed\n");
15003 bp->cnic_enabled = true;
15005 bp->cnic_kwq = kzalloc(PAGE_SIZE, GFP_KERNEL);
15009 bp->cnic_kwq_cons = bp->cnic_kwq;
15010 bp->cnic_kwq_prod = bp->cnic_kwq;
15011 bp->cnic_kwq_last = bp->cnic_kwq + MAX_SP_DESC_CNT;
15013 bp->cnic_spq_pending = 0;
15014 bp->cnic_kwq_pending = 0;
15016 bp->cnic_data = data;
15019 cp->drv_state |= CNIC_DRV_STATE_REGD;
15020 cp->iro_arr = bp->iro_arr;
15022 bnx2x_setup_cnic_irq_info(bp);
15024 rcu_assign_pointer(bp->cnic_ops, ops);
15026 /* Schedule driver to read CNIC driver versions */
15027 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0);
15032 static int bnx2x_unregister_cnic(struct net_device *dev)
15034 struct bnx2x *bp = netdev_priv(dev);
15035 struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
15037 mutex_lock(&bp->cnic_mutex);
15039 RCU_INIT_POINTER(bp->cnic_ops, NULL);
15040 mutex_unlock(&bp->cnic_mutex);
15042 bp->cnic_enabled = false;
15043 kfree(bp->cnic_kwq);
15044 bp->cnic_kwq = NULL;
15049 static struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev)
15051 struct bnx2x *bp = netdev_priv(dev);
15052 struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
15054 /* If both iSCSI and FCoE are disabled - return NULL in
15055 * order to indicate CNIC that it should not try to work
15056 * with this device.
15058 if (NO_ISCSI(bp) && NO_FCOE(bp))
15061 cp->drv_owner = THIS_MODULE;
15062 cp->chip_id = CHIP_ID(bp);
15063 cp->pdev = bp->pdev;
15064 cp->io_base = bp->regview;
15065 cp->io_base2 = bp->doorbells;
15066 cp->max_kwqe_pending = 8;
15067 cp->ctx_blk_size = CDU_ILT_PAGE_SZ;
15068 cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) +
15069 bnx2x_cid_ilt_lines(bp);
15070 cp->ctx_tbl_len = CNIC_ILT_LINES;
15071 cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS;
15072 cp->drv_submit_kwqes_16 = bnx2x_cnic_sp_queue;
15073 cp->drv_ctl = bnx2x_drv_ctl;
15074 cp->drv_get_fc_npiv_tbl = bnx2x_get_fc_npiv;
15075 cp->drv_register_cnic = bnx2x_register_cnic;
15076 cp->drv_unregister_cnic = bnx2x_unregister_cnic;
15077 cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp);
15078 cp->iscsi_l2_client_id =
15079 bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX);
15080 cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp);
15082 if (NO_ISCSI_OOO(bp))
15083 cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO;
15086 cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI;
15089 cp->drv_state |= CNIC_DRV_STATE_NO_FCOE;
15092 "page_size %d, tbl_offset %d, tbl_lines %d, starting cid %d\n",
15094 cp->ctx_tbl_offset,
15100 static u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp)
15102 struct bnx2x *bp = fp->bp;
15103 u32 offset = BAR_USTRORM_INTMEM;
15106 return bnx2x_vf_ustorm_prods_offset(bp, fp);
15107 else if (!CHIP_IS_E1x(bp))
15108 offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id);
15110 offset += USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), fp->cl_id);
15115 /* called only on E1H or E2.
15116 * When pretending to be PF, the pretend value is the function number 0...7
15117 * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID
15120 int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val)
15124 if (CHIP_IS_E1H(bp) && pretend_func_val >= E1H_FUNC_MAX)
15127 /* get my own pretend register */
15128 pretend_reg = bnx2x_get_pretend_reg(bp);
15129 REG_WR(bp, pretend_reg, pretend_func_val);
15130 REG_RD(bp, pretend_reg);
15134 static void bnx2x_ptp_task(struct work_struct *work)
15136 struct bnx2x *bp = container_of(work, struct bnx2x, ptp_task);
15137 int port = BP_PORT(bp);
15140 struct skb_shared_hwtstamps shhwtstamps;
15142 /* Read Tx timestamp registers */
15143 val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
15144 NIG_REG_P0_TLLH_PTP_BUF_SEQID);
15145 if (val_seq & 0x10000) {
15146 /* There is a valid timestamp value */
15147 timestamp = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_MSB :
15148 NIG_REG_P0_TLLH_PTP_BUF_TS_MSB);
15150 timestamp |= REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_LSB :
15151 NIG_REG_P0_TLLH_PTP_BUF_TS_LSB);
15152 /* Reset timestamp register to allow new timestamp */
15153 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
15154 NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000);
15155 ns = timecounter_cyc2time(&bp->timecounter, timestamp);
15157 memset(&shhwtstamps, 0, sizeof(shhwtstamps));
15158 shhwtstamps.hwtstamp = ns_to_ktime(ns);
15159 skb_tstamp_tx(bp->ptp_tx_skb, &shhwtstamps);
15160 dev_kfree_skb_any(bp->ptp_tx_skb);
15161 bp->ptp_tx_skb = NULL;
15163 DP(BNX2X_MSG_PTP, "Tx timestamp, timestamp cycles = %llu, ns = %llu\n",
15166 DP(BNX2X_MSG_PTP, "There is no valid Tx timestamp yet\n");
15167 /* Reschedule to keep checking for a valid timestamp value */
15168 schedule_work(&bp->ptp_task);
15172 void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb)
15174 int port = BP_PORT(bp);
15177 timestamp = REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB :
15178 NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB);
15180 timestamp |= REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB :
15181 NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB);
15183 /* Reset timestamp register to allow new timestamp */
15184 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID :
15185 NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000);
15187 ns = timecounter_cyc2time(&bp->timecounter, timestamp);
15189 skb_hwtstamps(skb)->hwtstamp = ns_to_ktime(ns);
15191 DP(BNX2X_MSG_PTP, "Rx timestamp, timestamp cycles = %llu, ns = %llu\n",
15196 static cycle_t bnx2x_cyclecounter_read(const struct cyclecounter *cc)
15198 struct bnx2x *bp = container_of(cc, struct bnx2x, cyclecounter);
15199 int port = BP_PORT(bp);
15203 REG_RD_DMAE(bp, port ? NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t1 :
15204 NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t0, wb_data, 2);
15205 phc_cycles = wb_data[1];
15206 phc_cycles = (phc_cycles << 32) + wb_data[0];
15208 DP(BNX2X_MSG_PTP, "PHC read cycles = %llu\n", phc_cycles);
15213 static void bnx2x_init_cyclecounter(struct bnx2x *bp)
15215 memset(&bp->cyclecounter, 0, sizeof(bp->cyclecounter));
15216 bp->cyclecounter.read = bnx2x_cyclecounter_read;
15217 bp->cyclecounter.mask = CYCLECOUNTER_MASK(64);
15218 bp->cyclecounter.shift = 1;
15219 bp->cyclecounter.mult = 1;
15222 static int bnx2x_send_reset_timesync_ramrod(struct bnx2x *bp)
15224 struct bnx2x_func_state_params func_params = {NULL};
15225 struct bnx2x_func_set_timesync_params *set_timesync_params =
15226 &func_params.params.set_timesync;
15228 /* Prepare parameters for function state transitions */
15229 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
15230 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags);
15232 func_params.f_obj = &bp->func_obj;
15233 func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC;
15235 /* Function parameters */
15236 set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_RESET;
15237 set_timesync_params->offset_cmd = TS_OFFSET_KEEP;
15239 return bnx2x_func_state_change(bp, &func_params);
15242 static int bnx2x_enable_ptp_packets(struct bnx2x *bp)
15244 struct bnx2x_queue_state_params q_params;
15247 /* send queue update ramrod to enable PTP packets */
15248 memset(&q_params, 0, sizeof(q_params));
15249 __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
15250 q_params.cmd = BNX2X_Q_CMD_UPDATE;
15251 __set_bit(BNX2X_Q_UPDATE_PTP_PKTS_CHNG,
15252 &q_params.params.update.update_flags);
15253 __set_bit(BNX2X_Q_UPDATE_PTP_PKTS,
15254 &q_params.params.update.update_flags);
15256 /* send the ramrod on all the queues of the PF */
15257 for_each_eth_queue(bp, i) {
15258 struct bnx2x_fastpath *fp = &bp->fp[i];
15260 /* Set the appropriate Queue object */
15261 q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
15263 /* Update the Queue state */
15264 rc = bnx2x_queue_state_change(bp, &q_params);
15266 BNX2X_ERR("Failed to enable PTP packets\n");
15274 int bnx2x_configure_ptp_filters(struct bnx2x *bp)
15276 int port = BP_PORT(bp);
15279 if (!bp->hwtstamp_ioctl_called)
15282 switch (bp->tx_type) {
15283 case HWTSTAMP_TX_ON:
15284 bp->flags |= TX_TIMESTAMPING_EN;
15285 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK :
15286 NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x6AA);
15287 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK :
15288 NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3EEE);
15290 case HWTSTAMP_TX_ONESTEP_SYNC:
15291 BNX2X_ERR("One-step timestamping is not supported\n");
15295 switch (bp->rx_filter) {
15296 case HWTSTAMP_FILTER_NONE:
15298 case HWTSTAMP_FILTER_ALL:
15299 case HWTSTAMP_FILTER_SOME:
15300 bp->rx_filter = HWTSTAMP_FILTER_NONE;
15302 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
15303 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
15304 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
15305 bp->rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
15306 /* Initialize PTP detection for UDP/IPv4 events */
15307 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK :
15308 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7EE);
15309 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK :
15310 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFE);
15312 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
15313 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
15314 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
15315 bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
15316 /* Initialize PTP detection for UDP/IPv4 or UDP/IPv6 events */
15317 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK :
15318 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7EA);
15319 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK :
15320 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FEE);
15322 case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
15323 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
15324 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
15325 bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
15326 /* Initialize PTP detection L2 events */
15327 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK :
15328 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x6BF);
15329 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK :
15330 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3EFF);
15333 case HWTSTAMP_FILTER_PTP_V2_EVENT:
15334 case HWTSTAMP_FILTER_PTP_V2_SYNC:
15335 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
15336 bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
15337 /* Initialize PTP detection L2, UDP/IPv4 or UDP/IPv6 events */
15338 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK :
15339 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x6AA);
15340 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK :
15341 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3EEE);
15345 /* Indicate to FW that this PF expects recorded PTP packets */
15346 rc = bnx2x_enable_ptp_packets(bp);
15350 /* Enable sending PTP packets to host */
15351 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST :
15352 NIG_REG_P0_LLH_PTP_TO_HOST, 0x1);
15357 static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr)
15359 struct hwtstamp_config config;
15362 DP(BNX2X_MSG_PTP, "HWTSTAMP IOCTL called\n");
15364 if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
15367 DP(BNX2X_MSG_PTP, "Requested tx_type: %d, requested rx_filters = %d\n",
15368 config.tx_type, config.rx_filter);
15370 if (config.flags) {
15371 BNX2X_ERR("config.flags is reserved for future use\n");
15375 bp->hwtstamp_ioctl_called = 1;
15376 bp->tx_type = config.tx_type;
15377 bp->rx_filter = config.rx_filter;
15379 rc = bnx2x_configure_ptp_filters(bp);
15383 config.rx_filter = bp->rx_filter;
15385 return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
15389 /* Configures HW for PTP */
15390 static int bnx2x_configure_ptp(struct bnx2x *bp)
15392 int rc, port = BP_PORT(bp);
15395 /* Reset PTP event detection rules - will be configured in the IOCTL */
15396 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK :
15397 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF);
15398 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK :
15399 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF);
15400 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK :
15401 NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF);
15402 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK :
15403 NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF);
15405 /* Disable PTP packets to host - will be configured in the IOCTL*/
15406 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST :
15407 NIG_REG_P0_LLH_PTP_TO_HOST, 0x0);
15409 /* Enable the PTP feature */
15410 REG_WR(bp, port ? NIG_REG_P1_PTP_EN :
15411 NIG_REG_P0_PTP_EN, 0x3F);
15413 /* Enable the free-running counter */
15416 REG_WR_DMAE(bp, NIG_REG_TIMESYNC_GEN_REG + tsgen_ctrl, wb_data, 2);
15418 /* Reset drift register (offset register is not reset) */
15419 rc = bnx2x_send_reset_timesync_ramrod(bp);
15421 BNX2X_ERR("Failed to reset PHC drift register\n");
15425 /* Reset possibly old timestamps */
15426 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID :
15427 NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000);
15428 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
15429 NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000);
15434 /* Called during load, to initialize PTP-related stuff */
15435 void bnx2x_init_ptp(struct bnx2x *bp)
15439 /* Configure PTP in HW */
15440 rc = bnx2x_configure_ptp(bp);
15442 BNX2X_ERR("Stopping PTP initialization\n");
15446 /* Init work queue for Tx timestamping */
15447 INIT_WORK(&bp->ptp_task, bnx2x_ptp_task);
15449 /* Init cyclecounter and timecounter. This is done only in the first
15450 * load. If done in every load, PTP application will fail when doing
15451 * unload / load (e.g. MTU change) while it is running.
15453 if (!bp->timecounter_init_done) {
15454 bnx2x_init_cyclecounter(bp);
15455 timecounter_init(&bp->timecounter, &bp->cyclecounter,
15456 ktime_to_ns(ktime_get_real()));
15457 bp->timecounter_init_done = 1;
15460 DP(BNX2X_MSG_PTP, "PTP initialization ended successfully\n");