objtool: Re-arrange validate_functions()
[linux-block.git] / drivers / net / ethernet / amazon / ena / ena_netdev.h
1 /*
2  * Copyright 2015 Amazon.com, Inc. or its affiliates.
3  *
4  * This software is available to you under a choice of one of two
5  * licenses.  You may choose to be licensed under the terms of the GNU
6  * General Public License (GPL) Version 2, available from the file
7  * COPYING in the main directory of this source tree, or the
8  * BSD license below:
9  *
10  *     Redistribution and use in source and binary forms, with or
11  *     without modification, are permitted provided that the following
12  *     conditions are met:
13  *
14  *      - Redistributions of source code must retain the above
15  *        copyright notice, this list of conditions and the following
16  *        disclaimer.
17  *
18  *      - Redistributions in binary form must reproduce the above
19  *        copyright notice, this list of conditions and the following
20  *        disclaimer in the documentation and/or other materials
21  *        provided with the distribution.
22  *
23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30  * SOFTWARE.
31  */
32
33 #ifndef ENA_H
34 #define ENA_H
35
36 #include <linux/bitops.h>
37 #include <linux/dim.h>
38 #include <linux/etherdevice.h>
39 #include <linux/if_vlan.h>
40 #include <linux/inetdevice.h>
41 #include <linux/interrupt.h>
42 #include <linux/netdevice.h>
43 #include <linux/skbuff.h>
44
45 #include "ena_com.h"
46 #include "ena_eth_com.h"
47
48 #define DRV_MODULE_VER_MAJOR    2
49 #define DRV_MODULE_VER_MINOR    1
50 #define DRV_MODULE_VER_SUBMINOR 0
51
52 #define DRV_MODULE_NAME         "ena"
53 #ifndef DRV_MODULE_VERSION
54 #define DRV_MODULE_VERSION \
55         __stringify(DRV_MODULE_VER_MAJOR) "."   \
56         __stringify(DRV_MODULE_VER_MINOR) "."   \
57         __stringify(DRV_MODULE_VER_SUBMINOR) "K"
58 #endif
59
60 #define DEVICE_NAME     "Elastic Network Adapter (ENA)"
61
62 /* 1 for AENQ + ADMIN */
63 #define ENA_ADMIN_MSIX_VEC              1
64 #define ENA_MAX_MSIX_VEC(io_queues)     (ENA_ADMIN_MSIX_VEC + (io_queues))
65
66 /* The ENA buffer length fields is 16 bit long. So when PAGE_SIZE == 64kB the
67  * driver passes 0.
68  * Since the max packet size the ENA handles is ~9kB limit the buffer length to
69  * 16kB.
70  */
71 #if PAGE_SIZE > SZ_16K
72 #define ENA_PAGE_SIZE SZ_16K
73 #else
74 #define ENA_PAGE_SIZE PAGE_SIZE
75 #endif
76
77 #define ENA_MIN_MSIX_VEC                2
78
79 #define ENA_REG_BAR                     0
80 #define ENA_MEM_BAR                     2
81 #define ENA_BAR_MASK (BIT(ENA_REG_BAR) | BIT(ENA_MEM_BAR))
82
83 #define ENA_DEFAULT_RING_SIZE   (1024)
84 #define ENA_MIN_RING_SIZE       (256)
85
86 #define ENA_MIN_NUM_IO_QUEUES   (1)
87
88 #define ENA_TX_WAKEUP_THRESH            (MAX_SKB_FRAGS + 2)
89 #define ENA_DEFAULT_RX_COPYBREAK        (256 - NET_IP_ALIGN)
90
91 /* limit the buffer size to 600 bytes to handle MTU changes from very
92  * small to very large, in which case the number of buffers per packet
93  * could exceed ENA_PKT_MAX_BUFS
94  */
95 #define ENA_DEFAULT_MIN_RX_BUFF_ALLOC_SIZE 600
96
97 #define ENA_MIN_MTU             128
98
99 #define ENA_NAME_MAX_LEN        20
100 #define ENA_IRQNAME_SIZE        40
101
102 #define ENA_PKT_MAX_BUFS        19
103
104 #define ENA_RX_RSS_TABLE_LOG_SIZE  7
105 #define ENA_RX_RSS_TABLE_SIZE   (1 << ENA_RX_RSS_TABLE_LOG_SIZE)
106
107 #define ENA_HASH_KEY_SIZE       40
108
109 /* The number of tx packet completions that will be handled each NAPI poll
110  * cycle is ring_size / ENA_TX_POLL_BUDGET_DIVIDER.
111  */
112 #define ENA_TX_POLL_BUDGET_DIVIDER      4
113
114 /* Refill Rx queue when number of required descriptors is above
115  * QUEUE_SIZE / ENA_RX_REFILL_THRESH_DIVIDER or ENA_RX_REFILL_THRESH_PACKET
116  */
117 #define ENA_RX_REFILL_THRESH_DIVIDER    8
118 #define ENA_RX_REFILL_THRESH_PACKET     256
119
120 /* Number of queues to check for missing queues per timer service */
121 #define ENA_MONITORED_TX_QUEUES 4
122 /* Max timeout packets before device reset */
123 #define MAX_NUM_OF_TIMEOUTED_PACKETS 128
124
125 #define ENA_TX_RING_IDX_NEXT(idx, ring_size) (((idx) + 1) & ((ring_size) - 1))
126
127 #define ENA_RX_RING_IDX_NEXT(idx, ring_size) (((idx) + 1) & ((ring_size) - 1))
128 #define ENA_RX_RING_IDX_ADD(idx, n, ring_size) \
129         (((idx) + (n)) & ((ring_size) - 1))
130
131 #define ENA_IO_TXQ_IDX(q)       (2 * (q))
132 #define ENA_IO_RXQ_IDX(q)       (2 * (q) + 1)
133
134 #define ENA_MGMNT_IRQ_IDX               0
135 #define ENA_IO_IRQ_FIRST_IDX            1
136 #define ENA_IO_IRQ_IDX(q)               (ENA_IO_IRQ_FIRST_IDX + (q))
137
138 /* ENA device should send keep alive msg every 1 sec.
139  * We wait for 6 sec just to be on the safe side.
140  */
141 #define ENA_DEVICE_KALIVE_TIMEOUT       (6 * HZ)
142 #define ENA_MAX_NO_INTERRUPT_ITERATIONS 3
143
144 #define ENA_MMIO_DISABLE_REG_READ       BIT(0)
145
146 /* The max MTU size is configured to be the ethernet frame size without
147  * the overhead of the ethernet header, which can have a VLAN header, and
148  * a frame check sequence (FCS).
149  * The buffer size we share with the device is defined to be ENA_PAGE_SIZE
150  */
151
152 #define ENA_XDP_MAX_MTU (ENA_PAGE_SIZE - ETH_HLEN - ETH_FCS_LEN - \
153                                 VLAN_HLEN - XDP_PACKET_HEADROOM)
154
155 #define ENA_IS_XDP_INDEX(adapter, index) (((index) >= (adapter)->xdp_first_ring) && \
156         ((index) < (adapter)->xdp_first_ring + (adapter)->xdp_num_queues))
157
158 struct ena_irq {
159         irq_handler_t handler;
160         void *data;
161         int cpu;
162         u32 vector;
163         cpumask_t affinity_hint_mask;
164         char name[ENA_IRQNAME_SIZE];
165 };
166
167 struct ena_napi {
168         struct napi_struct napi ____cacheline_aligned;
169         struct ena_ring *tx_ring;
170         struct ena_ring *rx_ring;
171         struct ena_ring *xdp_ring;
172         bool first_interrupt;
173         u32 qid;
174         struct dim dim;
175 };
176
177 struct ena_calc_queue_size_ctx {
178         struct ena_com_dev_get_features_ctx *get_feat_ctx;
179         struct ena_com_dev *ena_dev;
180         struct pci_dev *pdev;
181         u32 tx_queue_size;
182         u32 rx_queue_size;
183         u32 max_tx_queue_size;
184         u32 max_rx_queue_size;
185         u16 max_tx_sgl_size;
186         u16 max_rx_sgl_size;
187 };
188
189 struct ena_tx_buffer {
190         struct sk_buff *skb;
191         /* num of ena desc for this specific skb
192          * (includes data desc and metadata desc)
193          */
194         u32 tx_descs;
195         /* num of buffers used by this skb */
196         u32 num_of_bufs;
197
198         /* XDP buffer structure which is used for sending packets in
199          * the xdp queues
200          */
201         struct xdp_frame *xdpf;
202         /* The rx page for the rx buffer that was received in rx and
203          * re transmitted on xdp tx queues as a result of XDP_TX action.
204          * We need to free the page once we finished cleaning the buffer in
205          * clean_xdp_irq()
206          */
207         struct page *xdp_rx_page;
208
209         /* Indicate if bufs[0] map the linear data of the skb. */
210         u8 map_linear_data;
211
212         /* Used for detect missing tx packets to limit the number of prints */
213         u32 print_once;
214         /* Save the last jiffies to detect missing tx packets
215          *
216          * sets to non zero value on ena_start_xmit and set to zero on
217          * napi and timer_Service_routine.
218          *
219          * while this value is not protected by lock,
220          * a given packet is not expected to be handled by ena_start_xmit
221          * and by napi/timer_service at the same time.
222          */
223         unsigned long last_jiffies;
224         struct ena_com_buf bufs[ENA_PKT_MAX_BUFS];
225 } ____cacheline_aligned;
226
227 struct ena_rx_buffer {
228         struct sk_buff *skb;
229         struct page *page;
230         u32 page_offset;
231         struct ena_com_buf ena_buf;
232 } ____cacheline_aligned;
233
234 struct ena_stats_tx {
235         u64 cnt;
236         u64 bytes;
237         u64 queue_stop;
238         u64 prepare_ctx_err;
239         u64 queue_wakeup;
240         u64 dma_mapping_err;
241         u64 linearize;
242         u64 linearize_failed;
243         u64 napi_comp;
244         u64 tx_poll;
245         u64 doorbells;
246         u64 bad_req_id;
247         u64 llq_buffer_copy;
248         u64 missed_tx;
249 };
250
251 struct ena_stats_rx {
252         u64 cnt;
253         u64 bytes;
254         u64 rx_copybreak_pkt;
255         u64 csum_good;
256         u64 refil_partial;
257         u64 bad_csum;
258         u64 page_alloc_fail;
259         u64 skb_alloc_fail;
260         u64 dma_mapping_err;
261         u64 bad_desc_num;
262         u64 bad_req_id;
263         u64 empty_rx_ring;
264         u64 csum_unchecked;
265 };
266
267 struct ena_ring {
268         /* Holds the empty requests for TX/RX
269          * out of order completions
270          */
271         u16 *free_ids;
272
273         union {
274                 struct ena_tx_buffer *tx_buffer_info;
275                 struct ena_rx_buffer *rx_buffer_info;
276         };
277
278         /* cache ptr to avoid using the adapter */
279         struct device *dev;
280         struct pci_dev *pdev;
281         struct napi_struct *napi;
282         struct net_device *netdev;
283         struct ena_com_dev *ena_dev;
284         struct ena_adapter *adapter;
285         struct ena_com_io_cq *ena_com_io_cq;
286         struct ena_com_io_sq *ena_com_io_sq;
287         struct bpf_prog *xdp_bpf_prog;
288         struct xdp_rxq_info xdp_rxq;
289
290         u16 next_to_use;
291         u16 next_to_clean;
292         u16 rx_copybreak;
293         u16 rx_headroom;
294         u16 qid;
295         u16 mtu;
296         u16 sgl_size;
297
298         /* The maximum header length the device can handle */
299         u8 tx_max_header_size;
300
301         bool first_interrupt;
302         u16 no_interrupt_event_cnt;
303
304         /* cpu for TPH */
305         int cpu;
306          /* number of tx/rx_buffer_info's entries */
307         int ring_size;
308
309         enum ena_admin_placement_policy_type tx_mem_queue_type;
310
311         struct ena_com_rx_buf_info ena_bufs[ENA_PKT_MAX_BUFS];
312         u32  smoothed_interval;
313         u32  per_napi_packets;
314         u16 non_empty_napi_events;
315         struct u64_stats_sync syncp;
316         union {
317                 struct ena_stats_tx tx_stats;
318                 struct ena_stats_rx rx_stats;
319         };
320
321         u8 *push_buf_intermediate_buf;
322         int empty_rx_queue;
323 } ____cacheline_aligned;
324
325 struct ena_stats_dev {
326         u64 tx_timeout;
327         u64 suspend;
328         u64 resume;
329         u64 wd_expired;
330         u64 interface_up;
331         u64 interface_down;
332         u64 admin_q_pause;
333         u64 rx_drops;
334 };
335
336 enum ena_flags_t {
337         ENA_FLAG_DEVICE_RUNNING,
338         ENA_FLAG_DEV_UP,
339         ENA_FLAG_LINK_UP,
340         ENA_FLAG_MSIX_ENABLED,
341         ENA_FLAG_TRIGGER_RESET,
342         ENA_FLAG_ONGOING_RESET
343 };
344
345 /* adapter specific private data structure */
346 struct ena_adapter {
347         struct ena_com_dev *ena_dev;
348         /* OS defined structs */
349         struct net_device *netdev;
350         struct pci_dev *pdev;
351
352         /* rx packets that shorter that this len will be copied to the skb
353          * header
354          */
355         u32 rx_copybreak;
356         u32 max_mtu;
357
358         u32 num_io_queues;
359         u32 max_num_io_queues;
360
361         int msix_vecs;
362
363         u32 missing_tx_completion_threshold;
364
365         u32 requested_tx_ring_size;
366         u32 requested_rx_ring_size;
367
368         u32 max_tx_ring_size;
369         u32 max_rx_ring_size;
370
371         u32 msg_enable;
372
373         u16 max_tx_sgl_size;
374         u16 max_rx_sgl_size;
375
376         u8 mac_addr[ETH_ALEN];
377
378         unsigned long keep_alive_timeout;
379         unsigned long missing_tx_completion_to;
380
381         char name[ENA_NAME_MAX_LEN];
382
383         unsigned long flags;
384         /* TX */
385         struct ena_ring tx_ring[ENA_MAX_NUM_IO_QUEUES]
386                 ____cacheline_aligned_in_smp;
387
388         /* RX */
389         struct ena_ring rx_ring[ENA_MAX_NUM_IO_QUEUES]
390                 ____cacheline_aligned_in_smp;
391
392         struct ena_napi ena_napi[ENA_MAX_NUM_IO_QUEUES];
393
394         struct ena_irq irq_tbl[ENA_MAX_MSIX_VEC(ENA_MAX_NUM_IO_QUEUES)];
395
396         /* timer service */
397         struct work_struct reset_task;
398         struct timer_list timer_service;
399
400         bool wd_state;
401         bool dev_up_before_reset;
402         unsigned long last_keep_alive_jiffies;
403
404         struct u64_stats_sync syncp;
405         struct ena_stats_dev dev_stats;
406
407         /* last queue index that was checked for uncompleted tx packets */
408         u32 last_monitored_tx_qid;
409
410         enum ena_regs_reset_reason_types reset_reason;
411
412         struct bpf_prog *xdp_bpf_prog;
413         u32 xdp_first_ring;
414         u32 xdp_num_queues;
415 };
416
417 void ena_set_ethtool_ops(struct net_device *netdev);
418
419 void ena_dump_stats_to_dmesg(struct ena_adapter *adapter);
420
421 void ena_dump_stats_to_buf(struct ena_adapter *adapter, u8 *buf);
422
423 int ena_update_queue_sizes(struct ena_adapter *adapter,
424                            u32 new_tx_size,
425                            u32 new_rx_size);
426
427 int ena_update_queue_count(struct ena_adapter *adapter, u32 new_channel_count);
428
429 int ena_get_sset_count(struct net_device *netdev, int sset);
430
431 enum ena_xdp_errors_t {
432         ENA_XDP_ALLOWED = 0,
433         ENA_XDP_CURRENT_MTU_TOO_LARGE,
434         ENA_XDP_NO_ENOUGH_QUEUES,
435 };
436
437 static inline bool ena_xdp_queues_present(struct ena_adapter *adapter)
438 {
439         return adapter->xdp_first_ring != 0;
440 }
441
442 static inline bool ena_xdp_present(struct ena_adapter *adapter)
443 {
444         return !!adapter->xdp_bpf_prog;
445 }
446
447 static inline bool ena_xdp_present_ring(struct ena_ring *ring)
448 {
449         return !!ring->xdp_bpf_prog;
450 }
451
452 static inline int ena_xdp_legal_queue_count(struct ena_adapter *adapter,
453                                             u32 queues)
454 {
455         return 2 * queues <= adapter->max_num_io_queues;
456 }
457
458 static inline enum ena_xdp_errors_t ena_xdp_allowed(struct ena_adapter *adapter)
459 {
460         enum ena_xdp_errors_t rc = ENA_XDP_ALLOWED;
461
462         if (adapter->netdev->mtu > ENA_XDP_MAX_MTU)
463                 rc = ENA_XDP_CURRENT_MTU_TOO_LARGE;
464         else if (!ena_xdp_legal_queue_count(adapter, adapter->num_io_queues))
465                 rc = ENA_XDP_NO_ENOUGH_QUEUES;
466
467         return rc;
468 }
469
470 #endif /* !(ENA_H) */