Change Ryan Mallon's email address across the kernel
[linux-2.6-block.git] / drivers / mtd / devices / sst25l.c
1 /*
2  * sst25l.c
3  *
4  * Driver for SST25L SPI Flash chips
5  *
6  * Copyright © 2009 Bluewater Systems Ltd
7  * Author: Andre Renaud <andre@bluewatersys.com>
8  * Author: Ryan Mallon
9  *
10  * Based on m25p80.c
11  *
12  * This code is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License version 2 as
14  * published by the Free Software Foundation.
15  *
16  */
17
18 #include <linux/init.h>
19 #include <linux/module.h>
20 #include <linux/device.h>
21 #include <linux/mutex.h>
22 #include <linux/interrupt.h>
23 #include <linux/slab.h>
24 #include <linux/sched.h>
25
26 #include <linux/mtd/mtd.h>
27 #include <linux/mtd/partitions.h>
28
29 #include <linux/spi/spi.h>
30 #include <linux/spi/flash.h>
31
32 /* Erases can take up to 3 seconds! */
33 #define MAX_READY_WAIT_JIFFIES  msecs_to_jiffies(3000)
34
35 #define SST25L_CMD_WRSR         0x01    /* Write status register */
36 #define SST25L_CMD_WRDI         0x04    /* Write disable */
37 #define SST25L_CMD_RDSR         0x05    /* Read status register */
38 #define SST25L_CMD_WREN         0x06    /* Write enable */
39 #define SST25L_CMD_READ         0x03    /* High speed read */
40
41 #define SST25L_CMD_EWSR         0x50    /* Enable write status register */
42 #define SST25L_CMD_SECTOR_ERASE 0x20    /* Erase sector */
43 #define SST25L_CMD_READ_ID      0x90    /* Read device ID */
44 #define SST25L_CMD_AAI_PROGRAM  0xaf    /* Auto address increment */
45
46 #define SST25L_STATUS_BUSY      (1 << 0)        /* Chip is busy */
47 #define SST25L_STATUS_WREN      (1 << 1)        /* Write enabled */
48 #define SST25L_STATUS_BP0       (1 << 2)        /* Block protection 0 */
49 #define SST25L_STATUS_BP1       (1 << 3)        /* Block protection 1 */
50
51 struct sst25l_flash {
52         struct spi_device       *spi;
53         struct mutex            lock;
54         struct mtd_info         mtd;
55
56         int                     partitioned;
57 };
58
59 struct flash_info {
60         const char              *name;
61         uint16_t                device_id;
62         unsigned                page_size;
63         unsigned                nr_pages;
64         unsigned                erase_size;
65 };
66
67 #define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
68
69 static struct flash_info __devinitdata sst25l_flash_info[] = {
70         {"sst25lf020a", 0xbf43, 256, 1024, 4096},
71         {"sst25lf040a", 0xbf44, 256, 2048, 4096},
72 };
73
74 static int sst25l_status(struct sst25l_flash *flash, int *status)
75 {
76         struct spi_message m;
77         struct spi_transfer t;
78         unsigned char cmd_resp[2];
79         int err;
80
81         spi_message_init(&m);
82         memset(&t, 0, sizeof(struct spi_transfer));
83
84         cmd_resp[0] = SST25L_CMD_RDSR;
85         cmd_resp[1] = 0xff;
86         t.tx_buf = cmd_resp;
87         t.rx_buf = cmd_resp;
88         t.len = sizeof(cmd_resp);
89         spi_message_add_tail(&t, &m);
90         err = spi_sync(flash->spi, &m);
91         if (err < 0)
92                 return err;
93
94         *status = cmd_resp[1];
95         return 0;
96 }
97
98 static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
99 {
100         unsigned char command[2];
101         int status, err;
102
103         command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
104         err = spi_write(flash->spi, command, 1);
105         if (err)
106                 return err;
107
108         command[0] = SST25L_CMD_EWSR;
109         err = spi_write(flash->spi, command, 1);
110         if (err)
111                 return err;
112
113         command[0] = SST25L_CMD_WRSR;
114         command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
115         err = spi_write(flash->spi, command, 2);
116         if (err)
117                 return err;
118
119         if (enable) {
120                 err = sst25l_status(flash, &status);
121                 if (err)
122                         return err;
123                 if (!(status & SST25L_STATUS_WREN))
124                         return -EROFS;
125         }
126
127         return 0;
128 }
129
130 static int sst25l_wait_till_ready(struct sst25l_flash *flash)
131 {
132         unsigned long deadline;
133         int status, err;
134
135         deadline = jiffies + MAX_READY_WAIT_JIFFIES;
136         do {
137                 err = sst25l_status(flash, &status);
138                 if (err)
139                         return err;
140                 if (!(status & SST25L_STATUS_BUSY))
141                         return 0;
142
143                 cond_resched();
144         } while (!time_after_eq(jiffies, deadline));
145
146         return -ETIMEDOUT;
147 }
148
149 static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
150 {
151         unsigned char command[4];
152         int err;
153
154         err = sst25l_write_enable(flash, 1);
155         if (err)
156                 return err;
157
158         command[0] = SST25L_CMD_SECTOR_ERASE;
159         command[1] = offset >> 16;
160         command[2] = offset >> 8;
161         command[3] = offset;
162         err = spi_write(flash->spi, command, 4);
163         if (err)
164                 return err;
165
166         err = sst25l_wait_till_ready(flash);
167         if (err)
168                 return err;
169
170         return sst25l_write_enable(flash, 0);
171 }
172
173 static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
174 {
175         struct sst25l_flash *flash = to_sst25l_flash(mtd);
176         uint32_t addr, end;
177         int err;
178
179         /* Sanity checks */
180         if (instr->addr + instr->len > flash->mtd.size)
181                 return -EINVAL;
182
183         if ((uint32_t)instr->len % mtd->erasesize)
184                 return -EINVAL;
185
186         if ((uint32_t)instr->addr % mtd->erasesize)
187                 return -EINVAL;
188
189         addr = instr->addr;
190         end = addr + instr->len;
191
192         mutex_lock(&flash->lock);
193
194         err = sst25l_wait_till_ready(flash);
195         if (err) {
196                 mutex_unlock(&flash->lock);
197                 return err;
198         }
199
200         while (addr < end) {
201                 err = sst25l_erase_sector(flash, addr);
202                 if (err) {
203                         mutex_unlock(&flash->lock);
204                         instr->state = MTD_ERASE_FAILED;
205                         dev_err(&flash->spi->dev, "Erase failed\n");
206                         return err;
207                 }
208
209                 addr += mtd->erasesize;
210         }
211
212         mutex_unlock(&flash->lock);
213
214         instr->state = MTD_ERASE_DONE;
215         mtd_erase_callback(instr);
216         return 0;
217 }
218
219 static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
220                        size_t *retlen, unsigned char *buf)
221 {
222         struct sst25l_flash *flash = to_sst25l_flash(mtd);
223         struct spi_transfer transfer[2];
224         struct spi_message message;
225         unsigned char command[4];
226         int ret;
227
228         /* Sanity checking */
229         if (len == 0)
230                 return 0;
231
232         if (from + len > flash->mtd.size)
233                 return -EINVAL;
234
235         if (retlen)
236                 *retlen = 0;
237
238         spi_message_init(&message);
239         memset(&transfer, 0, sizeof(transfer));
240
241         command[0] = SST25L_CMD_READ;
242         command[1] = from >> 16;
243         command[2] = from >> 8;
244         command[3] = from;
245
246         transfer[0].tx_buf = command;
247         transfer[0].len = sizeof(command);
248         spi_message_add_tail(&transfer[0], &message);
249
250         transfer[1].rx_buf = buf;
251         transfer[1].len = len;
252         spi_message_add_tail(&transfer[1], &message);
253
254         mutex_lock(&flash->lock);
255
256         /* Wait for previous write/erase to complete */
257         ret = sst25l_wait_till_ready(flash);
258         if (ret) {
259                 mutex_unlock(&flash->lock);
260                 return ret;
261         }
262
263         spi_sync(flash->spi, &message);
264
265         if (retlen && message.actual_length > sizeof(command))
266                 *retlen += message.actual_length - sizeof(command);
267
268         mutex_unlock(&flash->lock);
269         return 0;
270 }
271
272 static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
273                         size_t *retlen, const unsigned char *buf)
274 {
275         struct sst25l_flash *flash = to_sst25l_flash(mtd);
276         int i, j, ret, bytes, copied = 0;
277         unsigned char command[5];
278
279         /* Sanity checks */
280         if (!len)
281                 return 0;
282
283         if (to + len > flash->mtd.size)
284                 return -EINVAL;
285
286         if ((uint32_t)to % mtd->writesize)
287                 return -EINVAL;
288
289         mutex_lock(&flash->lock);
290
291         ret = sst25l_write_enable(flash, 1);
292         if (ret)
293                 goto out;
294
295         for (i = 0; i < len; i += mtd->writesize) {
296                 ret = sst25l_wait_till_ready(flash);
297                 if (ret)
298                         goto out;
299
300                 /* Write the first byte of the page */
301                 command[0] = SST25L_CMD_AAI_PROGRAM;
302                 command[1] = (to + i) >> 16;
303                 command[2] = (to + i) >> 8;
304                 command[3] = (to + i);
305                 command[4] = buf[i];
306                 ret = spi_write(flash->spi, command, 5);
307                 if (ret < 0)
308                         goto out;
309                 copied++;
310
311                 /*
312                  * Write the remaining bytes using auto address
313                  * increment mode
314                  */
315                 bytes = min_t(uint32_t, mtd->writesize, len - i);
316                 for (j = 1; j < bytes; j++, copied++) {
317                         ret = sst25l_wait_till_ready(flash);
318                         if (ret)
319                                 goto out;
320
321                         command[1] = buf[i + j];
322                         ret = spi_write(flash->spi, command, 2);
323                         if (ret)
324                                 goto out;
325                 }
326         }
327
328 out:
329         ret = sst25l_write_enable(flash, 0);
330
331         if (retlen)
332                 *retlen = copied;
333
334         mutex_unlock(&flash->lock);
335         return ret;
336 }
337
338 static struct flash_info *__devinit sst25l_match_device(struct spi_device *spi)
339 {
340         struct flash_info *flash_info = NULL;
341         struct spi_message m;
342         struct spi_transfer t;
343         unsigned char cmd_resp[6];
344         int i, err;
345         uint16_t id;
346
347         spi_message_init(&m);
348         memset(&t, 0, sizeof(struct spi_transfer));
349
350         cmd_resp[0] = SST25L_CMD_READ_ID;
351         cmd_resp[1] = 0;
352         cmd_resp[2] = 0;
353         cmd_resp[3] = 0;
354         cmd_resp[4] = 0xff;
355         cmd_resp[5] = 0xff;
356         t.tx_buf = cmd_resp;
357         t.rx_buf = cmd_resp;
358         t.len = sizeof(cmd_resp);
359         spi_message_add_tail(&t, &m);
360         err = spi_sync(spi, &m);
361         if (err < 0) {
362                 dev_err(&spi->dev, "error reading device id\n");
363                 return NULL;
364         }
365
366         id = (cmd_resp[4] << 8) | cmd_resp[5];
367
368         for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
369                 if (sst25l_flash_info[i].device_id == id)
370                         flash_info = &sst25l_flash_info[i];
371
372         if (!flash_info)
373                 dev_err(&spi->dev, "unknown id %.4x\n", id);
374
375         return flash_info;
376 }
377
378 static int __devinit sst25l_probe(struct spi_device *spi)
379 {
380         struct flash_info *flash_info;
381         struct sst25l_flash *flash;
382         struct flash_platform_data *data;
383         int ret, i;
384         struct mtd_partition *parts = NULL;
385         int nr_parts = 0;
386
387         flash_info = sst25l_match_device(spi);
388         if (!flash_info)
389                 return -ENODEV;
390
391         flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL);
392         if (!flash)
393                 return -ENOMEM;
394
395         flash->spi = spi;
396         mutex_init(&flash->lock);
397         dev_set_drvdata(&spi->dev, flash);
398
399         data = spi->dev.platform_data;
400         if (data && data->name)
401                 flash->mtd.name = data->name;
402         else
403                 flash->mtd.name = dev_name(&spi->dev);
404
405         flash->mtd.type         = MTD_NORFLASH;
406         flash->mtd.flags        = MTD_CAP_NORFLASH;
407         flash->mtd.erasesize    = flash_info->erase_size;
408         flash->mtd.writesize    = flash_info->page_size;
409         flash->mtd.size         = flash_info->page_size * flash_info->nr_pages;
410         flash->mtd.erase        = sst25l_erase;
411         flash->mtd.read         = sst25l_read;
412         flash->mtd.write        = sst25l_write;
413
414         dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
415                  (long long)flash->mtd.size >> 10);
416
417         DEBUG(MTD_DEBUG_LEVEL2,
418               "mtd .name = %s, .size = 0x%llx (%lldMiB) "
419               ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
420               flash->mtd.name,
421               (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
422               flash->mtd.erasesize, flash->mtd.erasesize / 1024,
423               flash->mtd.numeraseregions);
424
425
426         if (mtd_has_cmdlinepart()) {
427                 static const char *part_probes[] = {"cmdlinepart", NULL};
428
429                 nr_parts = parse_mtd_partitions(&flash->mtd,
430                                                 part_probes,
431                                                 &parts, 0);
432         }
433
434         if (nr_parts <= 0 && data && data->parts) {
435                 parts = data->parts;
436                 nr_parts = data->nr_parts;
437         }
438
439         if (nr_parts > 0) {
440                 for (i = 0; i < nr_parts; i++) {
441                         DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
442                               "{.name = %s, .offset = 0x%llx, "
443                               ".size = 0x%llx (%lldKiB) }\n",
444                               i, parts[i].name,
445                               (long long)parts[i].offset,
446                               (long long)parts[i].size,
447                               (long long)(parts[i].size >> 10));
448                 }
449
450                 flash->partitioned = 1;
451                 return mtd_device_register(&flash->mtd, parts,
452                                            nr_parts);
453         }
454
455         ret = mtd_device_register(&flash->mtd, NULL, 0);
456         if (ret == 1) {
457                 kfree(flash);
458                 dev_set_drvdata(&spi->dev, NULL);
459                 return -ENODEV;
460         }
461
462         return 0;
463 }
464
465 static int __devexit sst25l_remove(struct spi_device *spi)
466 {
467         struct sst25l_flash *flash = dev_get_drvdata(&spi->dev);
468         int ret;
469
470         ret = mtd_device_unregister(&flash->mtd);
471         if (ret == 0)
472                 kfree(flash);
473         return ret;
474 }
475
476 static struct spi_driver sst25l_driver = {
477         .driver = {
478                 .name   = "sst25l",
479                 .bus    = &spi_bus_type,
480                 .owner  = THIS_MODULE,
481         },
482         .probe          = sst25l_probe,
483         .remove         = __devexit_p(sst25l_remove),
484 };
485
486 static int __init sst25l_init(void)
487 {
488         return spi_register_driver(&sst25l_driver);
489 }
490
491 static void __exit sst25l_exit(void)
492 {
493         spi_unregister_driver(&sst25l_driver);
494 }
495
496 module_init(sst25l_init);
497 module_exit(sst25l_exit);
498
499 MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
500 MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
501               "Ryan Mallon");
502 MODULE_LICENSE("GPL");