2 * linux/drivers/mmc/core/core.c
4 * Copyright (C) 2003-2004 Russell King, All Rights Reserved.
5 * SD support Copyright (C) 2004 Ian Molton, All Rights Reserved.
6 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
7 * MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
13 #include <linux/module.h>
14 #include <linux/init.h>
15 #include <linux/interrupt.h>
16 #include <linux/completion.h>
17 #include <linux/device.h>
18 #include <linux/delay.h>
19 #include <linux/pagemap.h>
20 #include <linux/err.h>
21 #include <linux/leds.h>
22 #include <linux/scatterlist.h>
23 #include <linux/log2.h>
24 #include <linux/regulator/consumer.h>
25 #include <linux/pm_runtime.h>
26 #include <linux/pm_wakeup.h>
27 #include <linux/suspend.h>
28 #include <linux/fault-inject.h>
29 #include <linux/random.h>
30 #include <linux/slab.h>
33 #include <linux/mmc/card.h>
34 #include <linux/mmc/host.h>
35 #include <linux/mmc/mmc.h>
36 #include <linux/mmc/sd.h>
37 #include <linux/mmc/slot-gpio.h>
49 /* If the device is not responding */
50 #define MMC_CORE_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */
53 * Background operations can take a long time, depending on the housekeeping
54 * operations the card has to perform.
56 #define MMC_BKOPS_MAX_TIMEOUT (4 * 60 * 1000) /* max time to wait in ms */
58 static struct workqueue_struct *workqueue;
59 static const unsigned freqs[] = { 400000, 300000, 200000, 100000 };
62 * Enabling software CRCs on the data blocks can be a significant (30%)
63 * performance cost, and for other reasons may not always be desired.
64 * So we allow it it to be disabled.
67 module_param(use_spi_crc, bool, 0);
70 * Internal function. Schedule delayed work in the MMC work queue.
72 static int mmc_schedule_delayed_work(struct delayed_work *work,
75 return queue_delayed_work(workqueue, work, delay);
79 * Internal function. Flush all scheduled work from the MMC work queue.
81 static void mmc_flush_scheduled_work(void)
83 flush_workqueue(workqueue);
86 #ifdef CONFIG_FAIL_MMC_REQUEST
89 * Internal function. Inject random data errors.
90 * If mmc_data is NULL no errors are injected.
92 static void mmc_should_fail_request(struct mmc_host *host,
93 struct mmc_request *mrq)
95 struct mmc_command *cmd = mrq->cmd;
96 struct mmc_data *data = mrq->data;
97 static const int data_errors[] = {
106 if (cmd->error || data->error ||
107 !should_fail(&host->fail_mmc_request, data->blksz * data->blocks))
110 data->error = data_errors[prandom_u32() % ARRAY_SIZE(data_errors)];
111 data->bytes_xfered = (prandom_u32() % (data->bytes_xfered >> 9)) << 9;
114 #else /* CONFIG_FAIL_MMC_REQUEST */
116 static inline void mmc_should_fail_request(struct mmc_host *host,
117 struct mmc_request *mrq)
121 #endif /* CONFIG_FAIL_MMC_REQUEST */
124 * mmc_request_done - finish processing an MMC request
125 * @host: MMC host which completed request
126 * @mrq: MMC request which request
128 * MMC drivers should call this function when they have completed
129 * their processing of a request.
131 void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
133 struct mmc_command *cmd = mrq->cmd;
134 int err = cmd->error;
136 if (err && cmd->retries && mmc_host_is_spi(host)) {
137 if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
141 if (err && cmd->retries && !mmc_card_removed(host->card)) {
143 * Request starter must handle retries - see
144 * mmc_wait_for_req_done().
149 mmc_should_fail_request(host, mrq);
151 led_trigger_event(host->led, LED_OFF);
154 pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n",
155 mmc_hostname(host), mrq->sbc->opcode,
157 mrq->sbc->resp[0], mrq->sbc->resp[1],
158 mrq->sbc->resp[2], mrq->sbc->resp[3]);
161 pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
162 mmc_hostname(host), cmd->opcode, err,
163 cmd->resp[0], cmd->resp[1],
164 cmd->resp[2], cmd->resp[3]);
167 pr_debug("%s: %d bytes transferred: %d\n",
169 mrq->data->bytes_xfered, mrq->data->error);
173 pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n",
174 mmc_hostname(host), mrq->stop->opcode,
176 mrq->stop->resp[0], mrq->stop->resp[1],
177 mrq->stop->resp[2], mrq->stop->resp[3]);
183 mmc_host_clk_release(host);
187 EXPORT_SYMBOL(mmc_request_done);
189 static int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
191 #ifdef CONFIG_MMC_DEBUG
193 struct scatterlist *sg;
195 if (mmc_card_removed(host->card))
199 pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n",
200 mmc_hostname(host), mrq->sbc->opcode,
201 mrq->sbc->arg, mrq->sbc->flags);
204 pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
205 mmc_hostname(host), mrq->cmd->opcode,
206 mrq->cmd->arg, mrq->cmd->flags);
209 pr_debug("%s: blksz %d blocks %d flags %08x "
210 "tsac %d ms nsac %d\n",
211 mmc_hostname(host), mrq->data->blksz,
212 mrq->data->blocks, mrq->data->flags,
213 mrq->data->timeout_ns / 1000000,
214 mrq->data->timeout_clks);
218 pr_debug("%s: CMD%u arg %08x flags %08x\n",
219 mmc_hostname(host), mrq->stop->opcode,
220 mrq->stop->arg, mrq->stop->flags);
223 WARN_ON(!host->claimed);
232 BUG_ON(mrq->data->blksz > host->max_blk_size);
233 BUG_ON(mrq->data->blocks > host->max_blk_count);
234 BUG_ON(mrq->data->blocks * mrq->data->blksz >
237 #ifdef CONFIG_MMC_DEBUG
239 for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i)
241 BUG_ON(sz != mrq->data->blocks * mrq->data->blksz);
244 mrq->cmd->data = mrq->data;
245 mrq->data->error = 0;
246 mrq->data->mrq = mrq;
248 mrq->data->stop = mrq->stop;
249 mrq->stop->error = 0;
250 mrq->stop->mrq = mrq;
253 mmc_host_clk_hold(host);
254 led_trigger_event(host->led, LED_FULL);
255 host->ops->request(host, mrq);
261 * mmc_start_bkops - start BKOPS for supported cards
262 * @card: MMC card to start BKOPS
263 * @form_exception: A flag to indicate if this function was
264 * called due to an exception raised by the card
266 * Start background operations whenever requested.
267 * When the urgent BKOPS bit is set in a R1 command response
268 * then background operations should be started immediately.
270 void mmc_start_bkops(struct mmc_card *card, bool from_exception)
274 bool use_busy_signal;
278 if (!card->ext_csd.man_bkops_en || mmc_card_doing_bkops(card))
281 err = mmc_read_bkops_status(card);
283 pr_err("%s: Failed to read bkops status: %d\n",
284 mmc_hostname(card->host), err);
288 if (!card->ext_csd.raw_bkops_status)
291 if (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2 &&
295 mmc_claim_host(card->host);
296 if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) {
297 timeout = MMC_BKOPS_MAX_TIMEOUT;
298 use_busy_signal = true;
301 use_busy_signal = false;
304 err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
305 EXT_CSD_BKOPS_START, 1, timeout,
306 use_busy_signal, true, false);
308 pr_warn("%s: Error %d starting bkops\n",
309 mmc_hostname(card->host), err);
314 * For urgent bkops status (LEVEL_2 and more)
315 * bkops executed synchronously, otherwise
316 * the operation is in progress
318 if (!use_busy_signal)
319 mmc_card_set_doing_bkops(card);
321 mmc_release_host(card->host);
323 EXPORT_SYMBOL(mmc_start_bkops);
326 * mmc_wait_data_done() - done callback for data request
327 * @mrq: done data request
329 * Wakes up mmc context, passed as a callback to host controller driver
331 static void mmc_wait_data_done(struct mmc_request *mrq)
333 mrq->host->context_info.is_done_rcv = true;
334 wake_up_interruptible(&mrq->host->context_info.wait);
337 static void mmc_wait_done(struct mmc_request *mrq)
339 complete(&mrq->completion);
343 *__mmc_start_data_req() - starts data request
344 * @host: MMC host to start the request
345 * @mrq: data request to start
347 * Sets the done callback to be called when request is completed by the card.
348 * Starts data mmc request execution
350 static int __mmc_start_data_req(struct mmc_host *host, struct mmc_request *mrq)
354 mrq->done = mmc_wait_data_done;
357 err = mmc_start_request(host, mrq);
359 mrq->cmd->error = err;
360 mmc_wait_data_done(mrq);
366 static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq)
370 init_completion(&mrq->completion);
371 mrq->done = mmc_wait_done;
373 err = mmc_start_request(host, mrq);
375 mrq->cmd->error = err;
376 complete(&mrq->completion);
383 * mmc_wait_for_data_req_done() - wait for request completed
384 * @host: MMC host to prepare the command.
385 * @mrq: MMC request to wait for
387 * Blocks MMC context till host controller will ack end of data request
388 * execution or new request notification arrives from the block layer.
389 * Handles command retries.
391 * Returns enum mmc_blk_status after checking errors.
393 static int mmc_wait_for_data_req_done(struct mmc_host *host,
394 struct mmc_request *mrq,
395 struct mmc_async_req *next_req)
397 struct mmc_command *cmd;
398 struct mmc_context_info *context_info = &host->context_info;
403 wait_event_interruptible(context_info->wait,
404 (context_info->is_done_rcv ||
405 context_info->is_new_req));
406 spin_lock_irqsave(&context_info->lock, flags);
407 context_info->is_waiting_last_req = false;
408 spin_unlock_irqrestore(&context_info->lock, flags);
409 if (context_info->is_done_rcv) {
410 context_info->is_done_rcv = false;
411 context_info->is_new_req = false;
414 if (!cmd->error || !cmd->retries ||
415 mmc_card_removed(host->card)) {
416 err = host->areq->err_check(host->card,
418 break; /* return err */
420 pr_info("%s: req failed (CMD%u): %d, retrying...\n",
422 cmd->opcode, cmd->error);
425 host->ops->request(host, mrq);
426 continue; /* wait for done/new event again */
428 } else if (context_info->is_new_req) {
429 context_info->is_new_req = false;
431 err = MMC_BLK_NEW_REQUEST;
432 break; /* return err */
439 static void mmc_wait_for_req_done(struct mmc_host *host,
440 struct mmc_request *mrq)
442 struct mmc_command *cmd;
445 wait_for_completion(&mrq->completion);
450 * If host has timed out waiting for the sanitize
451 * to complete, card might be still in programming state
452 * so let's try to bring the card out of programming
455 if (cmd->sanitize_busy && cmd->error == -ETIMEDOUT) {
456 if (!mmc_interrupt_hpi(host->card)) {
457 pr_warn("%s: %s: Interrupted sanitize\n",
458 mmc_hostname(host), __func__);
462 pr_err("%s: %s: Failed to interrupt sanitize\n",
463 mmc_hostname(host), __func__);
466 if (!cmd->error || !cmd->retries ||
467 mmc_card_removed(host->card))
470 pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
471 mmc_hostname(host), cmd->opcode, cmd->error);
474 host->ops->request(host, mrq);
479 * mmc_pre_req - Prepare for a new request
480 * @host: MMC host to prepare command
481 * @mrq: MMC request to prepare for
482 * @is_first_req: true if there is no previous started request
483 * that may run in parellel to this call, otherwise false
485 * mmc_pre_req() is called in prior to mmc_start_req() to let
486 * host prepare for the new request. Preparation of a request may be
487 * performed while another request is running on the host.
489 static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
492 if (host->ops->pre_req) {
493 mmc_host_clk_hold(host);
494 host->ops->pre_req(host, mrq, is_first_req);
495 mmc_host_clk_release(host);
500 * mmc_post_req - Post process a completed request
501 * @host: MMC host to post process command
502 * @mrq: MMC request to post process for
503 * @err: Error, if non zero, clean up any resources made in pre_req
505 * Let the host post process a completed request. Post processing of
506 * a request may be performed while another reuqest is running.
508 static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
511 if (host->ops->post_req) {
512 mmc_host_clk_hold(host);
513 host->ops->post_req(host, mrq, err);
514 mmc_host_clk_release(host);
519 * mmc_start_req - start a non-blocking request
520 * @host: MMC host to start command
521 * @areq: async request to start
522 * @error: out parameter returns 0 for success, otherwise non zero
524 * Start a new MMC custom command request for a host.
525 * If there is on ongoing async request wait for completion
526 * of that request and start the new one and return.
527 * Does not wait for the new request to complete.
529 * Returns the completed request, NULL in case of none completed.
530 * Wait for the an ongoing request (previoulsy started) to complete and
531 * return the completed request. If there is no ongoing request, NULL
532 * is returned without waiting. NULL is not an error condition.
534 struct mmc_async_req *mmc_start_req(struct mmc_host *host,
535 struct mmc_async_req *areq, int *error)
539 struct mmc_async_req *data = host->areq;
541 /* Prepare a new request */
543 mmc_pre_req(host, areq->mrq, !host->areq);
546 err = mmc_wait_for_data_req_done(host, host->areq->mrq, areq);
547 if (err == MMC_BLK_NEW_REQUEST) {
551 * The previous request was not completed,
557 * Check BKOPS urgency for each R1 response
559 if (host->card && mmc_card_mmc(host->card) &&
560 ((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) ||
561 (mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) &&
562 (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT)) {
564 /* Cancel the prepared request */
566 mmc_post_req(host, areq->mrq, -EINVAL);
568 mmc_start_bkops(host->card, true);
570 /* prepare the request again */
572 mmc_pre_req(host, areq->mrq, !host->areq);
577 start_err = __mmc_start_data_req(host, areq->mrq);
580 mmc_post_req(host, host->areq->mrq, 0);
582 /* Cancel a prepared request if it was not started. */
583 if ((err || start_err) && areq)
584 mmc_post_req(host, areq->mrq, -EINVAL);
595 EXPORT_SYMBOL(mmc_start_req);
598 * mmc_wait_for_req - start a request and wait for completion
599 * @host: MMC host to start command
600 * @mrq: MMC request to start
602 * Start a new MMC custom command request for a host, and wait
603 * for the command to complete. Does not attempt to parse the
606 void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq)
608 __mmc_start_req(host, mrq);
609 mmc_wait_for_req_done(host, mrq);
611 EXPORT_SYMBOL(mmc_wait_for_req);
614 * mmc_interrupt_hpi - Issue for High priority Interrupt
615 * @card: the MMC card associated with the HPI transfer
617 * Issued High Priority Interrupt, and check for card status
618 * until out-of prg-state.
620 int mmc_interrupt_hpi(struct mmc_card *card)
624 unsigned long prg_wait;
628 if (!card->ext_csd.hpi_en) {
629 pr_info("%s: HPI enable bit unset\n", mmc_hostname(card->host));
633 mmc_claim_host(card->host);
634 err = mmc_send_status(card, &status);
636 pr_err("%s: Get card status fail\n", mmc_hostname(card->host));
640 switch (R1_CURRENT_STATE(status)) {
646 * In idle and transfer states, HPI is not needed and the caller
647 * can issue the next intended command immediately
653 /* In all other states, it's illegal to issue HPI */
654 pr_debug("%s: HPI cannot be sent. Card state=%d\n",
655 mmc_hostname(card->host), R1_CURRENT_STATE(status));
660 err = mmc_send_hpi_cmd(card, &status);
664 prg_wait = jiffies + msecs_to_jiffies(card->ext_csd.out_of_int_time);
666 err = mmc_send_status(card, &status);
668 if (!err && R1_CURRENT_STATE(status) == R1_STATE_TRAN)
670 if (time_after(jiffies, prg_wait))
675 mmc_release_host(card->host);
678 EXPORT_SYMBOL(mmc_interrupt_hpi);
681 * mmc_wait_for_cmd - start a command and wait for completion
682 * @host: MMC host to start command
683 * @cmd: MMC command to start
684 * @retries: maximum number of retries
686 * Start a new MMC command for a host, and wait for the command
687 * to complete. Return any error that occurred while the command
688 * was executing. Do not attempt to parse the response.
690 int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries)
692 struct mmc_request mrq = {NULL};
694 WARN_ON(!host->claimed);
696 memset(cmd->resp, 0, sizeof(cmd->resp));
697 cmd->retries = retries;
702 mmc_wait_for_req(host, &mrq);
707 EXPORT_SYMBOL(mmc_wait_for_cmd);
710 * mmc_stop_bkops - stop ongoing BKOPS
711 * @card: MMC card to check BKOPS
713 * Send HPI command to stop ongoing background operations to
714 * allow rapid servicing of foreground operations, e.g. read/
715 * writes. Wait until the card comes out of the programming state
716 * to avoid errors in servicing read/write requests.
718 int mmc_stop_bkops(struct mmc_card *card)
723 err = mmc_interrupt_hpi(card);
726 * If err is EINVAL, we can't issue an HPI.
727 * It should complete the BKOPS.
729 if (!err || (err == -EINVAL)) {
730 mmc_card_clr_doing_bkops(card);
736 EXPORT_SYMBOL(mmc_stop_bkops);
738 int mmc_read_bkops_status(struct mmc_card *card)
743 mmc_claim_host(card->host);
744 err = mmc_get_ext_csd(card, &ext_csd);
745 mmc_release_host(card->host);
749 card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS];
750 card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS];
754 EXPORT_SYMBOL(mmc_read_bkops_status);
757 * mmc_set_data_timeout - set the timeout for a data command
758 * @data: data phase for command
759 * @card: the MMC card associated with the data transfer
761 * Computes the data timeout parameters according to the
762 * correct algorithm given the card type.
764 void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
769 * SDIO cards only define an upper 1 s limit on access.
771 if (mmc_card_sdio(card)) {
772 data->timeout_ns = 1000000000;
773 data->timeout_clks = 0;
778 * SD cards use a 100 multiplier rather than 10
780 mult = mmc_card_sd(card) ? 100 : 10;
783 * Scale up the multiplier (and therefore the timeout) by
784 * the r2w factor for writes.
786 if (data->flags & MMC_DATA_WRITE)
787 mult <<= card->csd.r2w_factor;
789 data->timeout_ns = card->csd.tacc_ns * mult;
790 data->timeout_clks = card->csd.tacc_clks * mult;
793 * SD cards also have an upper limit on the timeout.
795 if (mmc_card_sd(card)) {
796 unsigned int timeout_us, limit_us;
798 timeout_us = data->timeout_ns / 1000;
799 if (mmc_host_clk_rate(card->host))
800 timeout_us += data->timeout_clks * 1000 /
801 (mmc_host_clk_rate(card->host) / 1000);
803 if (data->flags & MMC_DATA_WRITE)
805 * The MMC spec "It is strongly recommended
806 * for hosts to implement more than 500ms
807 * timeout value even if the card indicates
808 * the 250ms maximum busy length." Even the
809 * previous value of 300ms is known to be
810 * insufficient for some cards.
817 * SDHC cards always use these fixed values.
819 if (timeout_us > limit_us || mmc_card_blockaddr(card)) {
820 data->timeout_ns = limit_us * 1000;
821 data->timeout_clks = 0;
824 /* assign limit value if invalid */
826 data->timeout_ns = limit_us * 1000;
830 * Some cards require longer data read timeout than indicated in CSD.
831 * Address this by setting the read timeout to a "reasonably high"
832 * value. For the cards tested, 300ms has proven enough. If necessary,
833 * this value can be increased if other problematic cards require this.
835 if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
836 data->timeout_ns = 300000000;
837 data->timeout_clks = 0;
841 * Some cards need very high timeouts if driven in SPI mode.
842 * The worst observed timeout was 900ms after writing a
843 * continuous stream of data until the internal logic
846 if (mmc_host_is_spi(card->host)) {
847 if (data->flags & MMC_DATA_WRITE) {
848 if (data->timeout_ns < 1000000000)
849 data->timeout_ns = 1000000000; /* 1s */
851 if (data->timeout_ns < 100000000)
852 data->timeout_ns = 100000000; /* 100ms */
856 EXPORT_SYMBOL(mmc_set_data_timeout);
859 * mmc_align_data_size - pads a transfer size to a more optimal value
860 * @card: the MMC card associated with the data transfer
861 * @sz: original transfer size
863 * Pads the original data size with a number of extra bytes in
864 * order to avoid controller bugs and/or performance hits
865 * (e.g. some controllers revert to PIO for certain sizes).
867 * Returns the improved size, which might be unmodified.
869 * Note that this function is only relevant when issuing a
870 * single scatter gather entry.
872 unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz)
875 * FIXME: We don't have a system for the controller to tell
876 * the core about its problems yet, so for now we just 32-bit
879 sz = ((sz + 3) / 4) * 4;
883 EXPORT_SYMBOL(mmc_align_data_size);
886 * __mmc_claim_host - exclusively claim a host
887 * @host: mmc host to claim
888 * @abort: whether or not the operation should be aborted
890 * Claim a host for a set of operations. If @abort is non null and
891 * dereference a non-zero value then this will return prematurely with
892 * that non-zero value without acquiring the lock. Returns zero
893 * with the lock held otherwise.
895 int __mmc_claim_host(struct mmc_host *host, atomic_t *abort)
897 DECLARE_WAITQUEUE(wait, current);
904 add_wait_queue(&host->wq, &wait);
905 spin_lock_irqsave(&host->lock, flags);
907 set_current_state(TASK_UNINTERRUPTIBLE);
908 stop = abort ? atomic_read(abort) : 0;
909 if (stop || !host->claimed || host->claimer == current)
911 spin_unlock_irqrestore(&host->lock, flags);
913 spin_lock_irqsave(&host->lock, flags);
915 set_current_state(TASK_RUNNING);
918 host->claimer = current;
919 host->claim_cnt += 1;
920 if (host->claim_cnt == 1)
924 spin_unlock_irqrestore(&host->lock, flags);
925 remove_wait_queue(&host->wq, &wait);
928 pm_runtime_get_sync(mmc_dev(host));
932 EXPORT_SYMBOL(__mmc_claim_host);
935 * mmc_release_host - release a host
936 * @host: mmc host to release
938 * Release a MMC host, allowing others to claim the host
939 * for their operations.
941 void mmc_release_host(struct mmc_host *host)
945 WARN_ON(!host->claimed);
947 spin_lock_irqsave(&host->lock, flags);
948 if (--host->claim_cnt) {
949 /* Release for nested claim */
950 spin_unlock_irqrestore(&host->lock, flags);
953 host->claimer = NULL;
954 spin_unlock_irqrestore(&host->lock, flags);
956 pm_runtime_mark_last_busy(mmc_dev(host));
957 pm_runtime_put_autosuspend(mmc_dev(host));
960 EXPORT_SYMBOL(mmc_release_host);
963 * This is a helper function, which fetches a runtime pm reference for the
964 * card device and also claims the host.
966 void mmc_get_card(struct mmc_card *card)
968 pm_runtime_get_sync(&card->dev);
969 mmc_claim_host(card->host);
971 EXPORT_SYMBOL(mmc_get_card);
974 * This is a helper function, which releases the host and drops the runtime
975 * pm reference for the card device.
977 void mmc_put_card(struct mmc_card *card)
979 mmc_release_host(card->host);
980 pm_runtime_mark_last_busy(&card->dev);
981 pm_runtime_put_autosuspend(&card->dev);
983 EXPORT_SYMBOL(mmc_put_card);
986 * Internal function that does the actual ios call to the host driver,
987 * optionally printing some debug output.
989 static inline void mmc_set_ios(struct mmc_host *host)
991 struct mmc_ios *ios = &host->ios;
993 pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
994 "width %u timing %u\n",
995 mmc_hostname(host), ios->clock, ios->bus_mode,
996 ios->power_mode, ios->chip_select, ios->vdd,
997 ios->bus_width, ios->timing);
1000 mmc_set_ungated(host);
1001 host->ops->set_ios(host, ios);
1005 * Control chip select pin on a host.
1007 void mmc_set_chip_select(struct mmc_host *host, int mode)
1009 mmc_host_clk_hold(host);
1010 host->ios.chip_select = mode;
1012 mmc_host_clk_release(host);
1016 * Sets the host clock to the highest possible frequency that
1019 static void __mmc_set_clock(struct mmc_host *host, unsigned int hz)
1021 WARN_ON(hz && hz < host->f_min);
1023 if (hz > host->f_max)
1026 host->ios.clock = hz;
1030 void mmc_set_clock(struct mmc_host *host, unsigned int hz)
1032 mmc_host_clk_hold(host);
1033 __mmc_set_clock(host, hz);
1034 mmc_host_clk_release(host);
1037 #ifdef CONFIG_MMC_CLKGATE
1039 * This gates the clock by setting it to 0 Hz.
1041 void mmc_gate_clock(struct mmc_host *host)
1043 unsigned long flags;
1045 spin_lock_irqsave(&host->clk_lock, flags);
1046 host->clk_old = host->ios.clock;
1047 host->ios.clock = 0;
1048 host->clk_gated = true;
1049 spin_unlock_irqrestore(&host->clk_lock, flags);
1054 * This restores the clock from gating by using the cached
1057 void mmc_ungate_clock(struct mmc_host *host)
1060 * We should previously have gated the clock, so the clock shall
1061 * be 0 here! The clock may however be 0 during initialization,
1062 * when some request operations are performed before setting
1063 * the frequency. When ungate is requested in that situation
1064 * we just ignore the call.
1066 if (host->clk_old) {
1067 BUG_ON(host->ios.clock);
1068 /* This call will also set host->clk_gated to false */
1069 __mmc_set_clock(host, host->clk_old);
1073 void mmc_set_ungated(struct mmc_host *host)
1075 unsigned long flags;
1078 * We've been given a new frequency while the clock is gated,
1079 * so make sure we regard this as ungating it.
1081 spin_lock_irqsave(&host->clk_lock, flags);
1082 host->clk_gated = false;
1083 spin_unlock_irqrestore(&host->clk_lock, flags);
1087 void mmc_set_ungated(struct mmc_host *host)
1092 int mmc_execute_tuning(struct mmc_card *card)
1094 struct mmc_host *host = card->host;
1098 if (!host->ops->execute_tuning)
1101 if (mmc_card_mmc(card))
1102 opcode = MMC_SEND_TUNING_BLOCK_HS200;
1104 opcode = MMC_SEND_TUNING_BLOCK;
1106 mmc_host_clk_hold(host);
1107 err = host->ops->execute_tuning(host, opcode);
1108 mmc_host_clk_release(host);
1111 pr_err("%s: tuning execution failed\n", mmc_hostname(host));
1117 * Change the bus mode (open drain/push-pull) of a host.
1119 void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
1121 mmc_host_clk_hold(host);
1122 host->ios.bus_mode = mode;
1124 mmc_host_clk_release(host);
1128 * Change data bus width of a host.
1130 void mmc_set_bus_width(struct mmc_host *host, unsigned int width)
1132 mmc_host_clk_hold(host);
1133 host->ios.bus_width = width;
1135 mmc_host_clk_release(host);
1139 * Set initial state after a power cycle or a hw_reset.
1141 void mmc_set_initial_state(struct mmc_host *host)
1143 if (mmc_host_is_spi(host))
1144 host->ios.chip_select = MMC_CS_HIGH;
1146 host->ios.chip_select = MMC_CS_DONTCARE;
1147 host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
1148 host->ios.bus_width = MMC_BUS_WIDTH_1;
1149 host->ios.timing = MMC_TIMING_LEGACY;
1155 * mmc_vdd_to_ocrbitnum - Convert a voltage to the OCR bit number
1156 * @vdd: voltage (mV)
1157 * @low_bits: prefer low bits in boundary cases
1159 * This function returns the OCR bit number according to the provided @vdd
1160 * value. If conversion is not possible a negative errno value returned.
1162 * Depending on the @low_bits flag the function prefers low or high OCR bits
1163 * on boundary voltages. For example,
1164 * with @low_bits = true, 3300 mV translates to ilog2(MMC_VDD_32_33);
1165 * with @low_bits = false, 3300 mV translates to ilog2(MMC_VDD_33_34);
1167 * Any value in the [1951:1999] range translates to the ilog2(MMC_VDD_20_21).
1169 static int mmc_vdd_to_ocrbitnum(int vdd, bool low_bits)
1171 const int max_bit = ilog2(MMC_VDD_35_36);
1174 if (vdd < 1650 || vdd > 3600)
1177 if (vdd >= 1650 && vdd <= 1950)
1178 return ilog2(MMC_VDD_165_195);
1183 /* Base 2000 mV, step 100 mV, bit's base 8. */
1184 bit = (vdd - 2000) / 100 + 8;
1191 * mmc_vddrange_to_ocrmask - Convert a voltage range to the OCR mask
1192 * @vdd_min: minimum voltage value (mV)
1193 * @vdd_max: maximum voltage value (mV)
1195 * This function returns the OCR mask bits according to the provided @vdd_min
1196 * and @vdd_max values. If conversion is not possible the function returns 0.
1198 * Notes wrt boundary cases:
1199 * This function sets the OCR bits for all boundary voltages, for example
1200 * [3300:3400] range is translated to MMC_VDD_32_33 | MMC_VDD_33_34 |
1201 * MMC_VDD_34_35 mask.
1203 u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max)
1207 if (vdd_max < vdd_min)
1210 /* Prefer high bits for the boundary vdd_max values. */
1211 vdd_max = mmc_vdd_to_ocrbitnum(vdd_max, false);
1215 /* Prefer low bits for the boundary vdd_min values. */
1216 vdd_min = mmc_vdd_to_ocrbitnum(vdd_min, true);
1220 /* Fill the mask, from max bit to min bit. */
1221 while (vdd_max >= vdd_min)
1222 mask |= 1 << vdd_max--;
1226 EXPORT_SYMBOL(mmc_vddrange_to_ocrmask);
1231 * mmc_of_parse_voltage - return mask of supported voltages
1232 * @np: The device node need to be parsed.
1233 * @mask: mask of voltages available for MMC/SD/SDIO
1235 * 1. Return zero on success.
1236 * 2. Return negative errno: voltage-range is invalid.
1238 int mmc_of_parse_voltage(struct device_node *np, u32 *mask)
1240 const u32 *voltage_ranges;
1243 voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges);
1244 num_ranges = num_ranges / sizeof(*voltage_ranges) / 2;
1245 if (!voltage_ranges || !num_ranges) {
1246 pr_info("%s: voltage-ranges unspecified\n", np->full_name);
1250 for (i = 0; i < num_ranges; i++) {
1251 const int j = i * 2;
1254 ocr_mask = mmc_vddrange_to_ocrmask(
1255 be32_to_cpu(voltage_ranges[j]),
1256 be32_to_cpu(voltage_ranges[j + 1]));
1258 pr_err("%s: voltage-range #%d is invalid\n",
1267 EXPORT_SYMBOL(mmc_of_parse_voltage);
1269 #endif /* CONFIG_OF */
1271 static int mmc_of_get_func_num(struct device_node *node)
1276 ret = of_property_read_u32(node, "reg", ®);
1283 struct device_node *mmc_of_find_child_device(struct mmc_host *host,
1286 struct device_node *node;
1288 if (!host->parent || !host->parent->of_node)
1291 for_each_child_of_node(host->parent->of_node, node) {
1292 if (mmc_of_get_func_num(node) == func_num)
1299 #ifdef CONFIG_REGULATOR
1302 * mmc_regulator_get_ocrmask - return mask of supported voltages
1303 * @supply: regulator to use
1305 * This returns either a negative errno, or a mask of voltages that
1306 * can be provided to MMC/SD/SDIO devices using the specified voltage
1307 * regulator. This would normally be called before registering the
1310 int mmc_regulator_get_ocrmask(struct regulator *supply)
1318 count = regulator_count_voltages(supply);
1322 for (i = 0; i < count; i++) {
1323 vdd_uV = regulator_list_voltage(supply, i);
1327 vdd_mV = vdd_uV / 1000;
1328 result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
1332 vdd_uV = regulator_get_voltage(supply);
1336 vdd_mV = vdd_uV / 1000;
1337 result = mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
1342 EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask);
1345 * mmc_regulator_set_ocr - set regulator to match host->ios voltage
1346 * @mmc: the host to regulate
1347 * @supply: regulator to use
1348 * @vdd_bit: zero for power off, else a bit number (host->ios.vdd)
1350 * Returns zero on success, else negative errno.
1352 * MMC host drivers may use this to enable or disable a regulator using
1353 * a particular supply voltage. This would normally be called from the
1356 int mmc_regulator_set_ocr(struct mmc_host *mmc,
1357 struct regulator *supply,
1358 unsigned short vdd_bit)
1367 * REVISIT mmc_vddrange_to_ocrmask() may have set some
1368 * bits this regulator doesn't quite support ... don't
1369 * be too picky, most cards and regulators are OK with
1370 * a 0.1V range goof (it's a small error percentage).
1372 tmp = vdd_bit - ilog2(MMC_VDD_165_195);
1374 min_uV = 1650 * 1000;
1375 max_uV = 1950 * 1000;
1377 min_uV = 1900 * 1000 + tmp * 100 * 1000;
1378 max_uV = min_uV + 100 * 1000;
1381 result = regulator_set_voltage(supply, min_uV, max_uV);
1382 if (result == 0 && !mmc->regulator_enabled) {
1383 result = regulator_enable(supply);
1385 mmc->regulator_enabled = true;
1387 } else if (mmc->regulator_enabled) {
1388 result = regulator_disable(supply);
1390 mmc->regulator_enabled = false;
1394 dev_err(mmc_dev(mmc),
1395 "could not set regulator OCR (%d)\n", result);
1398 EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr);
1400 #endif /* CONFIG_REGULATOR */
1402 int mmc_regulator_get_supply(struct mmc_host *mmc)
1404 struct device *dev = mmc_dev(mmc);
1407 mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc");
1408 mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc");
1410 if (IS_ERR(mmc->supply.vmmc)) {
1411 if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER)
1412 return -EPROBE_DEFER;
1413 dev_info(dev, "No vmmc regulator found\n");
1415 ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc);
1417 mmc->ocr_avail = ret;
1419 dev_warn(dev, "Failed getting OCR mask: %d\n", ret);
1422 if (IS_ERR(mmc->supply.vqmmc)) {
1423 if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER)
1424 return -EPROBE_DEFER;
1425 dev_info(dev, "No vqmmc regulator found\n");
1430 EXPORT_SYMBOL_GPL(mmc_regulator_get_supply);
1433 * Mask off any voltages we don't support and select
1434 * the lowest voltage
1436 u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
1441 * Sanity check the voltages that the card claims to
1445 dev_warn(mmc_dev(host),
1446 "card claims to support voltages below defined range\n");
1450 ocr &= host->ocr_avail;
1452 dev_warn(mmc_dev(host), "no support for card's volts\n");
1456 if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) {
1459 mmc_power_cycle(host, ocr);
1463 if (bit != host->ios.vdd)
1464 dev_warn(mmc_dev(host), "exceeding card's volts\n");
1470 int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
1473 int old_signal_voltage = host->ios.signal_voltage;
1475 host->ios.signal_voltage = signal_voltage;
1476 if (host->ops->start_signal_voltage_switch) {
1477 mmc_host_clk_hold(host);
1478 err = host->ops->start_signal_voltage_switch(host, &host->ios);
1479 mmc_host_clk_release(host);
1483 host->ios.signal_voltage = old_signal_voltage;
1489 int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr)
1491 struct mmc_command cmd = {0};
1498 * Send CMD11 only if the request is to switch the card to
1501 if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
1502 return __mmc_set_signal_voltage(host, signal_voltage);
1505 * If we cannot switch voltages, return failure so the caller
1506 * can continue without UHS mode
1508 if (!host->ops->start_signal_voltage_switch)
1510 if (!host->ops->card_busy)
1511 pr_warn("%s: cannot verify signal voltage switch\n",
1512 mmc_hostname(host));
1514 mmc_host_clk_hold(host);
1516 cmd.opcode = SD_SWITCH_VOLTAGE;
1518 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
1520 err = mmc_wait_for_cmd(host, &cmd, 0);
1524 if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR)) {
1529 * The card should drive cmd and dat[0:3] low immediately
1530 * after the response of cmd11, but wait 1 ms to be sure
1533 if (host->ops->card_busy && !host->ops->card_busy(host)) {
1538 * During a signal voltage level switch, the clock must be gated
1539 * for 5 ms according to the SD spec
1541 clock = host->ios.clock;
1542 host->ios.clock = 0;
1545 if (__mmc_set_signal_voltage(host, signal_voltage)) {
1547 * Voltages may not have been switched, but we've already
1548 * sent CMD11, so a power cycle is required anyway
1554 /* Keep clock gated for at least 5 ms */
1556 host->ios.clock = clock;
1559 /* Wait for at least 1 ms according to spec */
1563 * Failure to switch is indicated by the card holding
1566 if (host->ops->card_busy && host->ops->card_busy(host))
1571 pr_debug("%s: Signal voltage switch failed, "
1572 "power cycling card\n", mmc_hostname(host));
1573 mmc_power_cycle(host, ocr);
1577 mmc_host_clk_release(host);
1583 * Select timing parameters for host.
1585 void mmc_set_timing(struct mmc_host *host, unsigned int timing)
1587 mmc_host_clk_hold(host);
1588 host->ios.timing = timing;
1590 mmc_host_clk_release(host);
1594 * Select appropriate driver type for host.
1596 void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type)
1598 mmc_host_clk_hold(host);
1599 host->ios.drv_type = drv_type;
1601 mmc_host_clk_release(host);
1605 * Apply power to the MMC stack. This is a two-stage process.
1606 * First, we enable power to the card without the clock running.
1607 * We then wait a bit for the power to stabilise. Finally,
1608 * enable the bus drivers and clock to the card.
1610 * We must _NOT_ enable the clock prior to power stablising.
1612 * If a host does all the power sequencing itself, ignore the
1613 * initial MMC_POWER_UP stage.
1615 void mmc_power_up(struct mmc_host *host, u32 ocr)
1617 if (host->ios.power_mode == MMC_POWER_ON)
1620 mmc_host_clk_hold(host);
1622 mmc_pwrseq_pre_power_on(host);
1624 host->ios.vdd = fls(ocr) - 1;
1625 host->ios.power_mode = MMC_POWER_UP;
1626 /* Set initial state and call mmc_set_ios */
1627 mmc_set_initial_state(host);
1629 /* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
1630 if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0)
1631 dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n");
1632 else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180) == 0)
1633 dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n");
1634 else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120) == 0)
1635 dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n");
1638 * This delay should be sufficient to allow the power supply
1639 * to reach the minimum voltage.
1643 mmc_pwrseq_post_power_on(host);
1645 host->ios.clock = host->f_init;
1647 host->ios.power_mode = MMC_POWER_ON;
1651 * This delay must be at least 74 clock sizes, or 1 ms, or the
1652 * time required to reach a stable voltage.
1656 mmc_host_clk_release(host);
1659 void mmc_power_off(struct mmc_host *host)
1661 if (host->ios.power_mode == MMC_POWER_OFF)
1664 mmc_host_clk_hold(host);
1666 mmc_pwrseq_power_off(host);
1668 host->ios.clock = 0;
1671 host->ios.power_mode = MMC_POWER_OFF;
1672 /* Set initial state and call mmc_set_ios */
1673 mmc_set_initial_state(host);
1676 * Some configurations, such as the 802.11 SDIO card in the OLPC
1677 * XO-1.5, require a short delay after poweroff before the card
1678 * can be successfully turned on again.
1682 mmc_host_clk_release(host);
1685 void mmc_power_cycle(struct mmc_host *host, u32 ocr)
1687 mmc_power_off(host);
1688 /* Wait at least 1 ms according to SD spec */
1690 mmc_power_up(host, ocr);
1694 * Cleanup when the last reference to the bus operator is dropped.
1696 static void __mmc_release_bus(struct mmc_host *host)
1699 BUG_ON(host->bus_refs);
1700 BUG_ON(!host->bus_dead);
1702 host->bus_ops = NULL;
1706 * Increase reference count of bus operator
1708 static inline void mmc_bus_get(struct mmc_host *host)
1710 unsigned long flags;
1712 spin_lock_irqsave(&host->lock, flags);
1714 spin_unlock_irqrestore(&host->lock, flags);
1718 * Decrease reference count of bus operator and free it if
1719 * it is the last reference.
1721 static inline void mmc_bus_put(struct mmc_host *host)
1723 unsigned long flags;
1725 spin_lock_irqsave(&host->lock, flags);
1727 if ((host->bus_refs == 0) && host->bus_ops)
1728 __mmc_release_bus(host);
1729 spin_unlock_irqrestore(&host->lock, flags);
1733 * Assign a mmc bus handler to a host. Only one bus handler may control a
1734 * host at any given time.
1736 void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops)
1738 unsigned long flags;
1743 WARN_ON(!host->claimed);
1745 spin_lock_irqsave(&host->lock, flags);
1747 BUG_ON(host->bus_ops);
1748 BUG_ON(host->bus_refs);
1750 host->bus_ops = ops;
1754 spin_unlock_irqrestore(&host->lock, flags);
1758 * Remove the current bus handler from a host.
1760 void mmc_detach_bus(struct mmc_host *host)
1762 unsigned long flags;
1766 WARN_ON(!host->claimed);
1767 WARN_ON(!host->bus_ops);
1769 spin_lock_irqsave(&host->lock, flags);
1773 spin_unlock_irqrestore(&host->lock, flags);
1778 static void _mmc_detect_change(struct mmc_host *host, unsigned long delay,
1781 #ifdef CONFIG_MMC_DEBUG
1782 unsigned long flags;
1783 spin_lock_irqsave(&host->lock, flags);
1784 WARN_ON(host->removed);
1785 spin_unlock_irqrestore(&host->lock, flags);
1789 * If the device is configured as wakeup, we prevent a new sleep for
1790 * 5 s to give provision for user space to consume the event.
1792 if (cd_irq && !(host->caps & MMC_CAP_NEEDS_POLL) &&
1793 device_can_wakeup(mmc_dev(host)))
1794 pm_wakeup_event(mmc_dev(host), 5000);
1796 host->detect_change = 1;
1797 mmc_schedule_delayed_work(&host->detect, delay);
1801 * mmc_detect_change - process change of state on a MMC socket
1802 * @host: host which changed state.
1803 * @delay: optional delay to wait before detection (jiffies)
1805 * MMC drivers should call this when they detect a card has been
1806 * inserted or removed. The MMC layer will confirm that any
1807 * present card is still functional, and initialize any newly
1810 void mmc_detect_change(struct mmc_host *host, unsigned long delay)
1812 _mmc_detect_change(host, delay, true);
1814 EXPORT_SYMBOL(mmc_detect_change);
1816 void mmc_init_erase(struct mmc_card *card)
1820 if (is_power_of_2(card->erase_size))
1821 card->erase_shift = ffs(card->erase_size) - 1;
1823 card->erase_shift = 0;
1826 * It is possible to erase an arbitrarily large area of an SD or MMC
1827 * card. That is not desirable because it can take a long time
1828 * (minutes) potentially delaying more important I/O, and also the
1829 * timeout calculations become increasingly hugely over-estimated.
1830 * Consequently, 'pref_erase' is defined as a guide to limit erases
1831 * to that size and alignment.
1833 * For SD cards that define Allocation Unit size, limit erases to one
1834 * Allocation Unit at a time. For MMC cards that define High Capacity
1835 * Erase Size, whether it is switched on or not, limit to that size.
1836 * Otherwise just have a stab at a good value. For modern cards it
1837 * will end up being 4MiB. Note that if the value is too small, it
1838 * can end up taking longer to erase.
1840 if (mmc_card_sd(card) && card->ssr.au) {
1841 card->pref_erase = card->ssr.au;
1842 card->erase_shift = ffs(card->ssr.au) - 1;
1843 } else if (card->ext_csd.hc_erase_size) {
1844 card->pref_erase = card->ext_csd.hc_erase_size;
1845 } else if (card->erase_size) {
1846 sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11;
1848 card->pref_erase = 512 * 1024 / 512;
1850 card->pref_erase = 1024 * 1024 / 512;
1852 card->pref_erase = 2 * 1024 * 1024 / 512;
1854 card->pref_erase = 4 * 1024 * 1024 / 512;
1855 if (card->pref_erase < card->erase_size)
1856 card->pref_erase = card->erase_size;
1858 sz = card->pref_erase % card->erase_size;
1860 card->pref_erase += card->erase_size - sz;
1863 card->pref_erase = 0;
1866 static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card,
1867 unsigned int arg, unsigned int qty)
1869 unsigned int erase_timeout;
1871 if (arg == MMC_DISCARD_ARG ||
1872 (arg == MMC_TRIM_ARG && card->ext_csd.rev >= 6)) {
1873 erase_timeout = card->ext_csd.trim_timeout;
1874 } else if (card->ext_csd.erase_group_def & 1) {
1875 /* High Capacity Erase Group Size uses HC timeouts */
1876 if (arg == MMC_TRIM_ARG)
1877 erase_timeout = card->ext_csd.trim_timeout;
1879 erase_timeout = card->ext_csd.hc_erase_timeout;
1881 /* CSD Erase Group Size uses write timeout */
1882 unsigned int mult = (10 << card->csd.r2w_factor);
1883 unsigned int timeout_clks = card->csd.tacc_clks * mult;
1884 unsigned int timeout_us;
1886 /* Avoid overflow: e.g. tacc_ns=80000000 mult=1280 */
1887 if (card->csd.tacc_ns < 1000000)
1888 timeout_us = (card->csd.tacc_ns * mult) / 1000;
1890 timeout_us = (card->csd.tacc_ns / 1000) * mult;
1893 * ios.clock is only a target. The real clock rate might be
1894 * less but not that much less, so fudge it by multiplying by 2.
1897 timeout_us += (timeout_clks * 1000) /
1898 (mmc_host_clk_rate(card->host) / 1000);
1900 erase_timeout = timeout_us / 1000;
1903 * Theoretically, the calculation could underflow so round up
1904 * to 1ms in that case.
1910 /* Multiplier for secure operations */
1911 if (arg & MMC_SECURE_ARGS) {
1912 if (arg == MMC_SECURE_ERASE_ARG)
1913 erase_timeout *= card->ext_csd.sec_erase_mult;
1915 erase_timeout *= card->ext_csd.sec_trim_mult;
1918 erase_timeout *= qty;
1921 * Ensure at least a 1 second timeout for SPI as per
1922 * 'mmc_set_data_timeout()'
1924 if (mmc_host_is_spi(card->host) && erase_timeout < 1000)
1925 erase_timeout = 1000;
1927 return erase_timeout;
1930 static unsigned int mmc_sd_erase_timeout(struct mmc_card *card,
1934 unsigned int erase_timeout;
1936 if (card->ssr.erase_timeout) {
1937 /* Erase timeout specified in SD Status Register (SSR) */
1938 erase_timeout = card->ssr.erase_timeout * qty +
1939 card->ssr.erase_offset;
1942 * Erase timeout not specified in SD Status Register (SSR) so
1943 * use 250ms per write block.
1945 erase_timeout = 250 * qty;
1948 /* Must not be less than 1 second */
1949 if (erase_timeout < 1000)
1950 erase_timeout = 1000;
1952 return erase_timeout;
1955 static unsigned int mmc_erase_timeout(struct mmc_card *card,
1959 if (mmc_card_sd(card))
1960 return mmc_sd_erase_timeout(card, arg, qty);
1962 return mmc_mmc_erase_timeout(card, arg, qty);
1965 static int mmc_do_erase(struct mmc_card *card, unsigned int from,
1966 unsigned int to, unsigned int arg)
1968 struct mmc_command cmd = {0};
1969 unsigned int qty = 0;
1970 unsigned long timeout;
1974 * qty is used to calculate the erase timeout which depends on how many
1975 * erase groups (or allocation units in SD terminology) are affected.
1976 * We count erasing part of an erase group as one erase group.
1977 * For SD, the allocation units are always a power of 2. For MMC, the
1978 * erase group size is almost certainly also power of 2, but it does not
1979 * seem to insist on that in the JEDEC standard, so we fall back to
1980 * division in that case. SD may not specify an allocation unit size,
1981 * in which case the timeout is based on the number of write blocks.
1983 * Note that the timeout for secure trim 2 will only be correct if the
1984 * number of erase groups specified is the same as the total of all
1985 * preceding secure trim 1 commands. Since the power may have been
1986 * lost since the secure trim 1 commands occurred, it is generally
1987 * impossible to calculate the secure trim 2 timeout correctly.
1989 if (card->erase_shift)
1990 qty += ((to >> card->erase_shift) -
1991 (from >> card->erase_shift)) + 1;
1992 else if (mmc_card_sd(card))
1993 qty += to - from + 1;
1995 qty += ((to / card->erase_size) -
1996 (from / card->erase_size)) + 1;
1998 if (!mmc_card_blockaddr(card)) {
2003 if (mmc_card_sd(card))
2004 cmd.opcode = SD_ERASE_WR_BLK_START;
2006 cmd.opcode = MMC_ERASE_GROUP_START;
2008 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
2009 err = mmc_wait_for_cmd(card->host, &cmd, 0);
2011 pr_err("mmc_erase: group start error %d, "
2012 "status %#x\n", err, cmd.resp[0]);
2017 memset(&cmd, 0, sizeof(struct mmc_command));
2018 if (mmc_card_sd(card))
2019 cmd.opcode = SD_ERASE_WR_BLK_END;
2021 cmd.opcode = MMC_ERASE_GROUP_END;
2023 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
2024 err = mmc_wait_for_cmd(card->host, &cmd, 0);
2026 pr_err("mmc_erase: group end error %d, status %#x\n",
2032 memset(&cmd, 0, sizeof(struct mmc_command));
2033 cmd.opcode = MMC_ERASE;
2035 cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
2036 cmd.busy_timeout = mmc_erase_timeout(card, arg, qty);
2037 err = mmc_wait_for_cmd(card->host, &cmd, 0);
2039 pr_err("mmc_erase: erase error %d, status %#x\n",
2045 if (mmc_host_is_spi(card->host))
2048 timeout = jiffies + msecs_to_jiffies(MMC_CORE_TIMEOUT_MS);
2050 memset(&cmd, 0, sizeof(struct mmc_command));
2051 cmd.opcode = MMC_SEND_STATUS;
2052 cmd.arg = card->rca << 16;
2053 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
2054 /* Do not retry else we can't see errors */
2055 err = mmc_wait_for_cmd(card->host, &cmd, 0);
2056 if (err || (cmd.resp[0] & 0xFDF92000)) {
2057 pr_err("error %d requesting status %#x\n",
2063 /* Timeout if the device never becomes ready for data and
2064 * never leaves the program state.
2066 if (time_after(jiffies, timeout)) {
2067 pr_err("%s: Card stuck in programming state! %s\n",
2068 mmc_hostname(card->host), __func__);
2073 } while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
2074 (R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG));
2080 * mmc_erase - erase sectors.
2081 * @card: card to erase
2082 * @from: first sector to erase
2083 * @nr: number of sectors to erase
2084 * @arg: erase command argument (SD supports only %MMC_ERASE_ARG)
2086 * Caller must claim host before calling this function.
2088 int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
2091 unsigned int rem, to = from + nr;
2093 if (!(card->host->caps & MMC_CAP_ERASE) ||
2094 !(card->csd.cmdclass & CCC_ERASE))
2097 if (!card->erase_size)
2100 if (mmc_card_sd(card) && arg != MMC_ERASE_ARG)
2103 if ((arg & MMC_SECURE_ARGS) &&
2104 !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN))
2107 if ((arg & MMC_TRIM_ARGS) &&
2108 !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN))
2111 if (arg == MMC_SECURE_ERASE_ARG) {
2112 if (from % card->erase_size || nr % card->erase_size)
2116 if (arg == MMC_ERASE_ARG) {
2117 rem = from % card->erase_size;
2119 rem = card->erase_size - rem;
2126 rem = nr % card->erase_size;
2139 /* 'from' and 'to' are inclusive */
2142 return mmc_do_erase(card, from, to, arg);
2144 EXPORT_SYMBOL(mmc_erase);
2146 int mmc_can_erase(struct mmc_card *card)
2148 if ((card->host->caps & MMC_CAP_ERASE) &&
2149 (card->csd.cmdclass & CCC_ERASE) && card->erase_size)
2153 EXPORT_SYMBOL(mmc_can_erase);
2155 int mmc_can_trim(struct mmc_card *card)
2157 if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)
2161 EXPORT_SYMBOL(mmc_can_trim);
2163 int mmc_can_discard(struct mmc_card *card)
2166 * As there's no way to detect the discard support bit at v4.5
2167 * use the s/w feature support filed.
2169 if (card->ext_csd.feature_support & MMC_DISCARD_FEATURE)
2173 EXPORT_SYMBOL(mmc_can_discard);
2175 int mmc_can_sanitize(struct mmc_card *card)
2177 if (!mmc_can_trim(card) && !mmc_can_erase(card))
2179 if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_SANITIZE)
2183 EXPORT_SYMBOL(mmc_can_sanitize);
2185 int mmc_can_secure_erase_trim(struct mmc_card *card)
2187 if ((card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN) &&
2188 !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN))
2192 EXPORT_SYMBOL(mmc_can_secure_erase_trim);
2194 int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
2197 if (!card->erase_size)
2199 if (from % card->erase_size || nr % card->erase_size)
2203 EXPORT_SYMBOL(mmc_erase_group_aligned);
2205 static unsigned int mmc_do_calc_max_discard(struct mmc_card *card,
2208 struct mmc_host *host = card->host;
2209 unsigned int max_discard, x, y, qty = 0, max_qty, timeout;
2210 unsigned int last_timeout = 0;
2212 if (card->erase_shift)
2213 max_qty = UINT_MAX >> card->erase_shift;
2214 else if (mmc_card_sd(card))
2217 max_qty = UINT_MAX / card->erase_size;
2219 /* Find the largest qty with an OK timeout */
2222 for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) {
2223 timeout = mmc_erase_timeout(card, arg, qty + x);
2224 if (timeout > host->max_busy_timeout)
2226 if (timeout < last_timeout)
2228 last_timeout = timeout;
2240 /* Convert qty to sectors */
2241 if (card->erase_shift)
2242 max_discard = --qty << card->erase_shift;
2243 else if (mmc_card_sd(card))
2246 max_discard = --qty * card->erase_size;
2251 unsigned int mmc_calc_max_discard(struct mmc_card *card)
2253 struct mmc_host *host = card->host;
2254 unsigned int max_discard, max_trim;
2256 if (!host->max_busy_timeout)
2260 * Without erase_group_def set, MMC erase timeout depends on clock
2261 * frequence which can change. In that case, the best choice is
2262 * just the preferred erase size.
2264 if (mmc_card_mmc(card) && !(card->ext_csd.erase_group_def & 1))
2265 return card->pref_erase;
2267 max_discard = mmc_do_calc_max_discard(card, MMC_ERASE_ARG);
2268 if (mmc_can_trim(card)) {
2269 max_trim = mmc_do_calc_max_discard(card, MMC_TRIM_ARG);
2270 if (max_trim < max_discard)
2271 max_discard = max_trim;
2272 } else if (max_discard < card->erase_size) {
2275 pr_debug("%s: calculated max. discard sectors %u for timeout %u ms\n",
2276 mmc_hostname(host), max_discard, host->max_busy_timeout);
2279 EXPORT_SYMBOL(mmc_calc_max_discard);
2281 int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
2283 struct mmc_command cmd = {0};
2285 if (mmc_card_blockaddr(card) || mmc_card_ddr52(card))
2288 cmd.opcode = MMC_SET_BLOCKLEN;
2290 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
2291 return mmc_wait_for_cmd(card->host, &cmd, 5);
2293 EXPORT_SYMBOL(mmc_set_blocklen);
2295 int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
2298 struct mmc_command cmd = {0};
2300 cmd.opcode = MMC_SET_BLOCK_COUNT;
2301 cmd.arg = blockcount & 0x0000FFFF;
2304 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
2305 return mmc_wait_for_cmd(card->host, &cmd, 5);
2307 EXPORT_SYMBOL(mmc_set_blockcount);
2309 static void mmc_hw_reset_for_init(struct mmc_host *host)
2311 if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
2313 mmc_host_clk_hold(host);
2314 host->ops->hw_reset(host);
2315 mmc_host_clk_release(host);
2318 int mmc_hw_reset(struct mmc_host *host)
2326 if (!host->bus_ops || host->bus_dead || !host->bus_ops->reset) {
2331 ret = host->bus_ops->reset(host);
2334 pr_warn("%s: tried to reset card\n", mmc_hostname(host));
2338 EXPORT_SYMBOL(mmc_hw_reset);
2340 static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
2342 host->f_init = freq;
2344 #ifdef CONFIG_MMC_DEBUG
2345 pr_info("%s: %s: trying to init card at %u Hz\n",
2346 mmc_hostname(host), __func__, host->f_init);
2348 mmc_power_up(host, host->ocr_avail);
2351 * Some eMMCs (with VCCQ always on) may not be reset after power up, so
2352 * do a hardware reset if possible.
2354 mmc_hw_reset_for_init(host);
2357 * sdio_reset sends CMD52 to reset card. Since we do not know
2358 * if the card is being re-initialized, just send it. CMD52
2359 * should be ignored by SD/eMMC cards.
2364 mmc_send_if_cond(host, host->ocr_avail);
2366 /* Order's important: probe SDIO, then SD, then MMC */
2367 if (!mmc_attach_sdio(host))
2369 if (!mmc_attach_sd(host))
2371 if (!mmc_attach_mmc(host))
2374 mmc_power_off(host);
2378 int _mmc_detect_card_removed(struct mmc_host *host)
2382 if (host->caps & MMC_CAP_NONREMOVABLE)
2385 if (!host->card || mmc_card_removed(host->card))
2388 ret = host->bus_ops->alive(host);
2391 * Card detect status and alive check may be out of sync if card is
2392 * removed slowly, when card detect switch changes while card/slot
2393 * pads are still contacted in hardware (refer to "SD Card Mechanical
2394 * Addendum, Appendix C: Card Detection Switch"). So reschedule a
2395 * detect work 200ms later for this case.
2397 if (!ret && host->ops->get_cd && !host->ops->get_cd(host)) {
2398 mmc_detect_change(host, msecs_to_jiffies(200));
2399 pr_debug("%s: card removed too slowly\n", mmc_hostname(host));
2403 mmc_card_set_removed(host->card);
2404 pr_debug("%s: card remove detected\n", mmc_hostname(host));
2410 int mmc_detect_card_removed(struct mmc_host *host)
2412 struct mmc_card *card = host->card;
2415 WARN_ON(!host->claimed);
2420 ret = mmc_card_removed(card);
2422 * The card will be considered unchanged unless we have been asked to
2423 * detect a change or host requires polling to provide card detection.
2425 if (!host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL))
2428 host->detect_change = 0;
2430 ret = _mmc_detect_card_removed(host);
2431 if (ret && (host->caps & MMC_CAP_NEEDS_POLL)) {
2433 * Schedule a detect work as soon as possible to let a
2434 * rescan handle the card removal.
2436 cancel_delayed_work(&host->detect);
2437 _mmc_detect_change(host, 0, false);
2443 EXPORT_SYMBOL(mmc_detect_card_removed);
2445 void mmc_rescan(struct work_struct *work)
2447 struct mmc_host *host =
2448 container_of(work, struct mmc_host, detect.work);
2451 if (host->trigger_card_event && host->ops->card_event) {
2452 host->ops->card_event(host);
2453 host->trigger_card_event = false;
2456 if (host->rescan_disable)
2459 /* If there is a non-removable card registered, only scan once */
2460 if ((host->caps & MMC_CAP_NONREMOVABLE) && host->rescan_entered)
2462 host->rescan_entered = 1;
2467 * if there is a _removable_ card registered, check whether it is
2470 if (host->bus_ops && !host->bus_dead
2471 && !(host->caps & MMC_CAP_NONREMOVABLE))
2472 host->bus_ops->detect(host);
2474 host->detect_change = 0;
2477 * Let mmc_bus_put() free the bus/bus_ops if we've found that
2478 * the card is no longer present.
2483 /* if there still is a card present, stop here */
2484 if (host->bus_ops != NULL) {
2490 * Only we can add a new handler, so it's safe to
2491 * release the lock here.
2495 if (!(host->caps & MMC_CAP_NONREMOVABLE) && host->ops->get_cd &&
2496 host->ops->get_cd(host) == 0) {
2497 mmc_claim_host(host);
2498 mmc_power_off(host);
2499 mmc_release_host(host);
2503 mmc_claim_host(host);
2504 for (i = 0; i < ARRAY_SIZE(freqs); i++) {
2505 if (!mmc_rescan_try_freq(host, max(freqs[i], host->f_min)))
2507 if (freqs[i] <= host->f_min)
2510 mmc_release_host(host);
2513 if (host->caps & MMC_CAP_NEEDS_POLL)
2514 mmc_schedule_delayed_work(&host->detect, HZ);
2517 void mmc_start_host(struct mmc_host *host)
2519 host->f_init = max(freqs[0], host->f_min);
2520 host->rescan_disable = 0;
2521 host->ios.power_mode = MMC_POWER_UNDEFINED;
2522 if (host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP)
2523 mmc_power_off(host);
2525 mmc_power_up(host, host->ocr_avail);
2526 mmc_gpiod_request_cd_irq(host);
2527 _mmc_detect_change(host, 0, false);
2530 void mmc_stop_host(struct mmc_host *host)
2532 #ifdef CONFIG_MMC_DEBUG
2533 unsigned long flags;
2534 spin_lock_irqsave(&host->lock, flags);
2536 spin_unlock_irqrestore(&host->lock, flags);
2538 if (host->slot.cd_irq >= 0)
2539 disable_irq(host->slot.cd_irq);
2541 host->rescan_disable = 1;
2542 cancel_delayed_work_sync(&host->detect);
2543 mmc_flush_scheduled_work();
2545 /* clear pm flags now and let card drivers set them as needed */
2549 if (host->bus_ops && !host->bus_dead) {
2550 /* Calling bus_ops->remove() with a claimed host can deadlock */
2551 host->bus_ops->remove(host);
2552 mmc_claim_host(host);
2553 mmc_detach_bus(host);
2554 mmc_power_off(host);
2555 mmc_release_host(host);
2563 mmc_power_off(host);
2566 int mmc_power_save_host(struct mmc_host *host)
2570 #ifdef CONFIG_MMC_DEBUG
2571 pr_info("%s: %s: powering down\n", mmc_hostname(host), __func__);
2576 if (!host->bus_ops || host->bus_dead) {
2581 if (host->bus_ops->power_save)
2582 ret = host->bus_ops->power_save(host);
2586 mmc_power_off(host);
2590 EXPORT_SYMBOL(mmc_power_save_host);
2592 int mmc_power_restore_host(struct mmc_host *host)
2596 #ifdef CONFIG_MMC_DEBUG
2597 pr_info("%s: %s: powering up\n", mmc_hostname(host), __func__);
2602 if (!host->bus_ops || host->bus_dead) {
2607 mmc_power_up(host, host->card->ocr);
2608 ret = host->bus_ops->power_restore(host);
2614 EXPORT_SYMBOL(mmc_power_restore_host);
2617 * Flush the cache to the non-volatile storage.
2619 int mmc_flush_cache(struct mmc_card *card)
2623 if (mmc_card_mmc(card) &&
2624 (card->ext_csd.cache_size > 0) &&
2625 (card->ext_csd.cache_ctrl & 1)) {
2626 err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
2627 EXT_CSD_FLUSH_CACHE, 1, 0);
2629 pr_err("%s: cache flush error %d\n",
2630 mmc_hostname(card->host), err);
2635 EXPORT_SYMBOL(mmc_flush_cache);
2639 /* Do the card removal on suspend if card is assumed removeable
2640 * Do that in pm notifier while userspace isn't yet frozen, so we will be able
2643 int mmc_pm_notify(struct notifier_block *notify_block,
2644 unsigned long mode, void *unused)
2646 struct mmc_host *host = container_of(
2647 notify_block, struct mmc_host, pm_notify);
2648 unsigned long flags;
2652 case PM_HIBERNATION_PREPARE:
2653 case PM_SUSPEND_PREPARE:
2654 case PM_RESTORE_PREPARE:
2655 spin_lock_irqsave(&host->lock, flags);
2656 host->rescan_disable = 1;
2657 spin_unlock_irqrestore(&host->lock, flags);
2658 cancel_delayed_work_sync(&host->detect);
2663 /* Validate prerequisites for suspend */
2664 if (host->bus_ops->pre_suspend)
2665 err = host->bus_ops->pre_suspend(host);
2669 /* Calling bus_ops->remove() with a claimed host can deadlock */
2670 host->bus_ops->remove(host);
2671 mmc_claim_host(host);
2672 mmc_detach_bus(host);
2673 mmc_power_off(host);
2674 mmc_release_host(host);
2678 case PM_POST_SUSPEND:
2679 case PM_POST_HIBERNATION:
2680 case PM_POST_RESTORE:
2682 spin_lock_irqsave(&host->lock, flags);
2683 host->rescan_disable = 0;
2684 spin_unlock_irqrestore(&host->lock, flags);
2685 _mmc_detect_change(host, 0, false);
2694 * mmc_init_context_info() - init synchronization context
2697 * Init struct context_info needed to implement asynchronous
2698 * request mechanism, used by mmc core, host driver and mmc requests
2701 void mmc_init_context_info(struct mmc_host *host)
2703 spin_lock_init(&host->context_info.lock);
2704 host->context_info.is_new_req = false;
2705 host->context_info.is_done_rcv = false;
2706 host->context_info.is_waiting_last_req = false;
2707 init_waitqueue_head(&host->context_info.wait);
2710 static int __init mmc_init(void)
2714 workqueue = alloc_ordered_workqueue("kmmcd", 0);
2718 ret = mmc_register_bus();
2720 goto destroy_workqueue;
2722 ret = mmc_register_host_class();
2724 goto unregister_bus;
2726 ret = sdio_register_bus();
2728 goto unregister_host_class;
2732 unregister_host_class:
2733 mmc_unregister_host_class();
2735 mmc_unregister_bus();
2737 destroy_workqueue(workqueue);
2742 static void __exit mmc_exit(void)
2744 sdio_unregister_bus();
2745 mmc_unregister_host_class();
2746 mmc_unregister_bus();
2747 destroy_workqueue(workqueue);
2750 subsys_initcall(mmc_init);
2751 module_exit(mmc_exit);
2753 MODULE_LICENSE("GPL");